blob: 7d72eaa18922340292f4f007bb60994228a07eb0 [file] [log] [blame]
/* Copyright (C) 2017 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "system.h"
#include <errno.h>
#include <fcntl.h>
#include <net/if.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/prctl.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <unistd.h>
#include "util.h"
#ifdef HAVE_SECUREBITS_H
#include <linux/securebits.h>
#else
#define SECURE_ALL_BITS 0x55
#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1)
#endif
#define SECURE_BITS_NO_AMBIENT 0x15
#define SECURE_LOCKS_NO_AMBIENT (SECURE_BITS_NO_AMBIENT << 1)
/*
* Assert the value of SECURE_ALL_BITS at compile-time.
* Android devices are currently compiled against 4.4 kernel headers. Kernel 4.3
* added a new securebit.
* When a new securebit is added, the new SECURE_ALL_BITS mask will return EPERM
* when used on older kernels. The compile-time assert will catch this situation
* at compile time.
*/
#if defined(__ANDROID__)
_Static_assert(SECURE_ALL_BITS == 0x55, "SECURE_ALL_BITS == 0x55.");
#endif
int lock_securebits(uint64_t skip_mask)
{
/*
* Ambient capabilities can only be raised if they're already present
* in the permitted *and* inheritable set. Therefore, we don't really
* need to lock the NO_CAP_AMBIENT_RAISE securebit, since we are already
* configuring the permitted and inheritable set.
*/
unsigned long securebits =
(SECURE_BITS_NO_AMBIENT | SECURE_LOCKS_NO_AMBIENT) & ~skip_mask;
if (!securebits) {
return 0;
}
int securebits_ret = prctl(PR_SET_SECUREBITS, securebits);
if (securebits_ret < 0) {
pwarn("prctl(PR_SET_SECUREBITS) failed");
return -1;
}
return 0;
}
int write_proc_file(pid_t pid, const char *content, const char *basename)
{
int fd, ret;
size_t sz, len;
ssize_t written;
char filename[32];
sz = sizeof(filename);
ret = snprintf(filename, sz, "/proc/%d/%s", pid, basename);
if (ret < 0 || (size_t)ret >= sz) {
warn("failed to generate %s filename", basename);
return -1;
}
fd = open(filename, O_WRONLY | O_CLOEXEC);
if (fd < 0) {
pwarn("failed to open '%s'", filename);
return -errno;
}
len = strlen(content);
written = write(fd, content, len);
if (written < 0) {
pwarn("failed to write '%s'", filename);
return -1;
}
if ((size_t)written < len) {
warn("failed to write %zu bytes to '%s'", len, filename);
return -1;
}
close(fd);
return 0;
}
/*
* We specifically do not use cap_valid() as that only tells us the last
* valid cap we were *compiled* against (i.e. what the version of kernel
* headers says). If we run on a different kernel version, then it's not
* uncommon for that to be less (if an older kernel) or more (if a newer
* kernel).
* Normally, we suck up the answer via /proc. On Android, not all processes are
* guaranteed to be able to access '/proc/sys/kernel/cap_last_cap' so we
* programmatically find the value by calling prctl(PR_CAPBSET_READ).
*/
unsigned int get_last_valid_cap(void)
{
unsigned int last_valid_cap = 0;
if (is_android()) {
for (; prctl(PR_CAPBSET_READ, last_valid_cap, 0, 0, 0) >= 0;
++last_valid_cap)
;
/* |last_valid_cap| will be the first failing value. */
if (last_valid_cap > 0) {
last_valid_cap--;
}
} else {
const char cap_file[] = "/proc/sys/kernel/cap_last_cap";
FILE *fp = fopen(cap_file, "re");
if (fscanf(fp, "%u", &last_valid_cap) != 1)
pdie("fscanf(%s)", cap_file);
fclose(fp);
}
return last_valid_cap;
}
int cap_ambient_supported(void)
{
return prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_IS_SET, CAP_CHOWN, 0, 0) >=
0;
}
int config_net_loopback(void)
{
const char ifname[] = "lo";
int sock;
struct ifreq ifr;
/* Make sure people don't try to add really long names. */
_Static_assert(sizeof(ifname) <= IFNAMSIZ, "interface name too long");
sock = socket(AF_LOCAL, SOCK_DGRAM | SOCK_CLOEXEC, 0);
if (sock < 0) {
pwarn("socket(AF_LOCAL) failed");
return -1;
}
/*
* Do the equiv of `ip link set up lo`. The kernel will assign
* IPv4 (127.0.0.1) & IPv6 (::1) addresses automatically!
*/
strcpy(ifr.ifr_name, ifname);
if (ioctl(sock, SIOCGIFFLAGS, &ifr) < 0) {
pwarn("ioctl(SIOCGIFFLAGS) failed");
return -1;
}
/* The kernel preserves ifr.ifr_name for use. */
ifr.ifr_flags |= IFF_UP | IFF_RUNNING;
if (ioctl(sock, SIOCSIFFLAGS, &ifr) < 0) {
pwarn("ioctl(SIOCSIFFLAGS) failed");
return -1;
}
close(sock);
return 0;
}
int setup_pipe_end(int fds[2], size_t index)
{
if (index > 1)
return -1;
close(fds[1 - index]);
return fds[index];
}
int setup_and_dupe_pipe_end(int fds[2], size_t index, int fd)
{
if (index > 1)
return -1;
close(fds[1 - index]);
/* dup2(2) the corresponding end of the pipe into |fd|. */
return dup2(fds[index], fd);
}
int write_pid_to_path(pid_t pid, const char *path)
{
FILE *fp = fopen(path, "we");
if (!fp) {
pwarn("failed to open '%s'", path);
return -errno;
}
if (fprintf(fp, "%d\n", (int)pid) < 0) {
/* fprintf(3) does not set errno on failure. */
warn("fprintf(%s) failed", path);
return -1;
}
if (fclose(fp)) {
pwarn("fclose(%s) failed", path);
return -errno;
}
return 0;
}
/*
* setup_mount_destination: Ensures the mount target exists.
* Creates it if needed and possible.
*/
int setup_mount_destination(const char *source, const char *dest, uid_t uid,
uid_t gid, bool bind)
{
int rc;
struct stat st_buf;
bool domkdir;
rc = stat(dest, &st_buf);
if (rc == 0) /* destination exists */
return 0;
/*
* Try to create the destination.
* Either make a directory or touch a file depending on the source type.
*
* If the source isn't an absolute path, assume it is a filesystem type
* such as "tmpfs" and create a directory to mount it on. The dest will
* be something like "none" or "proc" which we shouldn't be checking.
*/
if (source[0] == '/') {
/* The source is an absolute path -- it better exist! */
rc = stat(source, &st_buf);
if (rc)
return -errno;
/*
* If bind mounting, we only create a directory if the source
* is a directory, else we always bind mount it as a file to
* support device nodes, sockets, etc...
*
* For all other mounts, we assume a block/char source is
* going to want a directory to mount to. If the source is
* something else (e.g. a fifo or socket), this probably will
* not do the right thing, but we'll fail later on when we try
* to mount(), so shouldn't be a big deal.
*/
domkdir = S_ISDIR(st_buf.st_mode) ||
(!bind && (S_ISBLK(st_buf.st_mode) ||
S_ISCHR(st_buf.st_mode)));
} else {
/* The source is a relative path -- assume it's a pseudo fs. */
/* Disallow relative bind mounts. */
if (bind)
return -EINVAL;
domkdir = true;
}
/* Now that we know what we want to do, do it! */
if (domkdir) {
if (mkdir(dest, 0700))
return -errno;
} else {
int fd = open(dest, O_RDWR | O_CREAT | O_CLOEXEC, 0700);
if (fd < 0)
return -errno;
close(fd);
}
return chown(dest, uid, gid);
}