| #!/bin/bash |
| |
| BM=$CI_PROJECT_DIR/install/bare-metal |
| |
| if [ -z "$BM_SERIAL" -a -z "$BM_SERIAL_SCRIPT" ]; then |
| echo "Must set BM_SERIAL OR BM_SERIAL_SCRIPT in your gitlab-runner config.toml [[runners]] environment" |
| echo "BM_SERIAL:" |
| echo " This is the serial device to talk to for waiting for fastboot to be ready and logging from the kernel." |
| echo "BM_SERIAL_SCRIPT:" |
| echo " This is a shell script to talk to for waiting for fastboot to be ready and logging from the kernel." |
| exit 1 |
| fi |
| |
| if [ -z "$BM_POWERUP" ]; then |
| echo "Must set BM_POWERUP in your gitlab-runner config.toml [[runners]] environment" |
| echo "This is a shell script that should reset the device and begin its boot sequence" |
| echo "such that it pauses at fastboot." |
| exit 1 |
| fi |
| |
| if [ -z "$BM_POWERDOWN" ]; then |
| echo "Must set BM_POWERDOWN in your gitlab-runner config.toml [[runners]] environment" |
| echo "This is a shell script that should power off the device." |
| exit 1 |
| fi |
| |
| if [ -z "$BM_FASTBOOT_SERIAL" ]; then |
| echo "Must set BM_FASTBOOT_SERIAL in your gitlab-runner config.toml [[runners]] environment" |
| echo "This must be the a stable-across-resets fastboot serial number." |
| exit 1 |
| fi |
| |
| if [ -z "$BM_KERNEL" ]; then |
| echo "Must set BM_KERNEL to your board's kernel vmlinuz or Image.gz in the job's variables:" |
| exit 1 |
| fi |
| |
| if [ -z "$BM_DTB" ]; then |
| echo "Must set BM_DTB to your board's DTB file in the job's variables:" |
| exit 1 |
| fi |
| |
| if [ -z "$BM_ROOTFS" ]; then |
| echo "Must set BM_ROOTFS to your board's rootfs directory in the job's variables:" |
| exit 1 |
| fi |
| |
| if [ -z "$BM_WEBDAV_IP" -o -z "$BM_WEBDAV_PORT" ]; then |
| echo "BM_WEBDAV_IP and/or BM_WEBDAV_PORT is not set - no results will be uploaded from DUT!" |
| WEBDAV_CMDLINE="" |
| else |
| WEBDAV_CMDLINE="webdav=http://$BM_WEBDAV_IP:$BM_WEBDAV_PORT" |
| fi |
| |
| set -ex |
| |
| # Clear out any previous run's artifacts. |
| rm -rf results/ |
| mkdir -p results |
| |
| # Create the rootfs in a temp dir |
| rsync -a --delete $BM_ROOTFS/ rootfs/ |
| . $BM/rootfs-setup.sh rootfs |
| |
| # Finally, pack it up into a cpio rootfs. Skip the vulkan CTS since none of |
| # these devices use it and it would take up space in the initrd. |
| pushd rootfs |
| find -H | \ |
| egrep -v "external/(openglcts|vulkancts|amber|glslang|spirv-tools)" | |
| egrep -v "traces-db|apitrace|renderdoc|python" | \ |
| cpio -H newc -o | \ |
| xz --check=crc32 -T4 - > $CI_PROJECT_DIR/rootfs.cpio.gz |
| popd |
| |
| # Make the combined kernel image and dtb for passing to fastboot. For normal |
| # Mesa development, we build the kernel and store it in the docker container |
| # that this script is running in. |
| # |
| # However, container builds are expensive, so when you're hacking on the |
| # kernel, it's nice to be able to skip the half hour container build and plus |
| # moving that container to the runner. So, if BM_KERNEL+BM_DTB are URLs, |
| # fetch them instead of looking in the container. |
| if echo "$BM_KERNEL $BM_DTB" | grep -q http; then |
| apt install -y wget |
| |
| wget $BM_KERNEL -O kernel |
| wget $BM_DTB -O dtb |
| |
| cat kernel dtb > Image.gz-dtb |
| rm kernel dtb |
| else |
| cat $BM_KERNEL $BM_DTB > Image.gz-dtb |
| fi |
| |
| abootimg \ |
| --create artifacts/fastboot.img \ |
| -k Image.gz-dtb \ |
| -r rootfs.cpio.gz \ |
| -c cmdline="$BM_CMDLINE $WEBDAV_CMDLINE" |
| rm Image.gz-dtb |
| |
| # Start nginx to get results from DUT |
| if [ -n "$WEBDAV_CMDLINE" ]; then |
| ln -s `pwd`/results /results |
| sed -i s/80/$BM_WEBDAV_PORT/g /etc/nginx/sites-enabled/default |
| sed -i s/www-data/root/g /etc/nginx/nginx.conf |
| nginx |
| fi |
| |
| export PATH=$BM:$PATH |
| |
| # Start background command for talking to serial if we have one. |
| if [ -n "$BM_SERIAL_SCRIPT" ]; then |
| $BM_SERIAL_SCRIPT | tee results/serial-output.txt & |
| |
| while [ ! -e results/serial-output.txt ]; do |
| sleep 1 |
| done |
| fi |
| |
| $BM/fastboot_run.py \ |
| --dev="$BM_SERIAL" \ |
| --fbserial="$BM_FASTBOOT_SERIAL" \ |
| --powerup="$BM_POWERUP" \ |
| --powerdown="$BM_POWERDOWN" |