| /* |
| * Copyright © 2013 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /** |
| * \file brw_performance_query.c |
| * |
| * Implementation of the GL_INTEL_performance_query extension. |
| * |
| * Currently there are two possible counter sources exposed here: |
| * |
| * On Gen6+ hardware we have numerous 64bit Pipeline Statistics Registers |
| * that we can snapshot at the beginning and end of a query. |
| * |
| * On Gen7.5+ we have Observability Architecture counters which are |
| * covered in separate document from the rest of the PRMs. It is available at: |
| * https://01.org/linuxgraphics/documentation/driver-documentation-prms |
| * => 2013 Intel Core Processor Family => Observability Performance Counters |
| * (This one volume covers Sandybridge, Ivybridge, Baytrail, and Haswell, |
| * though notably we currently only support OA counters for Haswell+) |
| */ |
| |
| #include <limits.h> |
| |
| /* put before sys/types.h to silence glibc warnings */ |
| #ifdef MAJOR_IN_MKDEV |
| #include <sys/mkdev.h> |
| #endif |
| #ifdef MAJOR_IN_SYSMACROS |
| #include <sys/sysmacros.h> |
| #endif |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <sys/mman.h> |
| #include <sys/ioctl.h> |
| |
| #include <xf86drm.h> |
| #include "drm-uapi/i915_drm.h" |
| |
| #include "main/hash.h" |
| #include "main/macros.h" |
| #include "main/mtypes.h" |
| #include "main/performance_query.h" |
| |
| #include "util/bitset.h" |
| #include "util/ralloc.h" |
| #include "util/hash_table.h" |
| #include "util/list.h" |
| #include "util/u_math.h" |
| |
| #include "brw_context.h" |
| #include "brw_defines.h" |
| #include "intel_batchbuffer.h" |
| |
| #include "perf/gen_perf.h" |
| #include "perf/gen_perf_mdapi.h" |
| |
| #define FILE_DEBUG_FLAG DEBUG_PERFMON |
| |
| #define OAREPORT_REASON_MASK 0x3f |
| #define OAREPORT_REASON_SHIFT 19 |
| #define OAREPORT_REASON_TIMER (1<<0) |
| #define OAREPORT_REASON_TRIGGER1 (1<<1) |
| #define OAREPORT_REASON_TRIGGER2 (1<<2) |
| #define OAREPORT_REASON_CTX_SWITCH (1<<3) |
| #define OAREPORT_REASON_GO_TRANSITION (1<<4) |
| |
| struct brw_perf_query_object { |
| struct gl_perf_query_object base; |
| struct gen_perf_query_object *query; |
| }; |
| |
| /** Downcasting convenience macro. */ |
| static inline struct brw_perf_query_object * |
| brw_perf_query(struct gl_perf_query_object *o) |
| { |
| return (struct brw_perf_query_object *) o; |
| } |
| |
| #define MI_RPC_BO_SIZE 4096 |
| #define MI_RPC_BO_END_OFFSET_BYTES (MI_RPC_BO_SIZE / 2) |
| #define MI_FREQ_START_OFFSET_BYTES (3072) |
| #define MI_FREQ_END_OFFSET_BYTES (3076) |
| |
| /******************************************************************************/ |
| |
| static bool |
| brw_is_perf_query_ready(struct gl_context *ctx, |
| struct gl_perf_query_object *o); |
| |
| static void |
| dump_perf_query_callback(GLuint id, void *query_void, void *brw_void) |
| { |
| struct gl_context *ctx = brw_void; |
| struct gl_perf_query_object *o = query_void; |
| struct brw_perf_query_object * brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| |
| switch (obj->queryinfo->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| DBG("%4d: %-6s %-8s BO: %-4s OA data: %-10s %-15s\n", |
| id, |
| o->Used ? "Dirty," : "New,", |
| o->Active ? "Active," : (o->Ready ? "Ready," : "Pending,"), |
| obj->oa.bo ? "yes," : "no,", |
| brw_is_perf_query_ready(ctx, o) ? "ready," : "not ready,", |
| obj->oa.results_accumulated ? "accumulated" : "not accumulated"); |
| break; |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| DBG("%4d: %-6s %-8s BO: %-4s\n", |
| id, |
| o->Used ? "Dirty," : "New,", |
| o->Active ? "Active," : (o->Ready ? "Ready," : "Pending,"), |
| obj->pipeline_stats.bo ? "yes" : "no"); |
| break; |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| } |
| |
| static void |
| dump_perf_queries(struct brw_context *brw) |
| { |
| struct gl_context *ctx = &brw->ctx; |
| DBG("Queries: (Open queries = %d, OA users = %d)\n", |
| brw->perf_ctx.n_active_oa_queries, brw->perf_ctx.n_oa_users); |
| _mesa_HashWalk(ctx->PerfQuery.Objects, dump_perf_query_callback, brw); |
| } |
| |
| /** |
| * Driver hook for glGetPerfQueryInfoINTEL(). |
| */ |
| static void |
| brw_get_perf_query_info(struct gl_context *ctx, |
| unsigned query_index, |
| const char **name, |
| GLuint *data_size, |
| GLuint *n_counters, |
| GLuint *n_active) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| const struct gen_perf_query_info *query = |
| &perf_ctx->perf->queries[query_index]; |
| |
| *name = query->name; |
| *data_size = query->data_size; |
| *n_counters = query->n_counters; |
| |
| switch (query->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| *n_active = perf_ctx->n_active_oa_queries; |
| break; |
| |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| *n_active = perf_ctx->n_active_pipeline_stats_queries; |
| break; |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| } |
| |
| static GLuint |
| gen_counter_type_enum_to_gl_type(enum gen_perf_counter_type type) |
| { |
| switch (type) { |
| case GEN_PERF_COUNTER_TYPE_EVENT: return GL_PERFQUERY_COUNTER_EVENT_INTEL; |
| case GEN_PERF_COUNTER_TYPE_DURATION_NORM: return GL_PERFQUERY_COUNTER_DURATION_NORM_INTEL; |
| case GEN_PERF_COUNTER_TYPE_DURATION_RAW: return GL_PERFQUERY_COUNTER_DURATION_RAW_INTEL; |
| case GEN_PERF_COUNTER_TYPE_THROUGHPUT: return GL_PERFQUERY_COUNTER_THROUGHPUT_INTEL; |
| case GEN_PERF_COUNTER_TYPE_RAW: return GL_PERFQUERY_COUNTER_RAW_INTEL; |
| case GEN_PERF_COUNTER_TYPE_TIMESTAMP: return GL_PERFQUERY_COUNTER_TIMESTAMP_INTEL; |
| default: |
| unreachable("Unknown counter type"); |
| } |
| } |
| |
| static GLuint |
| gen_counter_data_type_to_gl_type(enum gen_perf_counter_data_type type) |
| { |
| switch (type) { |
| case GEN_PERF_COUNTER_DATA_TYPE_BOOL32: return GL_PERFQUERY_COUNTER_DATA_BOOL32_INTEL; |
| case GEN_PERF_COUNTER_DATA_TYPE_UINT32: return GL_PERFQUERY_COUNTER_DATA_UINT32_INTEL; |
| case GEN_PERF_COUNTER_DATA_TYPE_UINT64: return GL_PERFQUERY_COUNTER_DATA_UINT64_INTEL; |
| case GEN_PERF_COUNTER_DATA_TYPE_FLOAT: return GL_PERFQUERY_COUNTER_DATA_FLOAT_INTEL; |
| case GEN_PERF_COUNTER_DATA_TYPE_DOUBLE: return GL_PERFQUERY_COUNTER_DATA_DOUBLE_INTEL; |
| default: |
| unreachable("Unknown counter data type"); |
| } |
| } |
| |
| /** |
| * Driver hook for glGetPerfCounterInfoINTEL(). |
| */ |
| static void |
| brw_get_perf_counter_info(struct gl_context *ctx, |
| unsigned query_index, |
| unsigned counter_index, |
| const char **name, |
| const char **desc, |
| GLuint *offset, |
| GLuint *data_size, |
| GLuint *type_enum, |
| GLuint *data_type_enum, |
| GLuint64 *raw_max) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| const struct gen_perf_query_info *query = |
| &brw->perf_ctx.perf->queries[query_index]; |
| const struct gen_perf_query_counter *counter = |
| &query->counters[counter_index]; |
| |
| *name = counter->name; |
| *desc = counter->desc; |
| *offset = counter->offset; |
| *data_size = gen_perf_query_counter_get_size(counter); |
| *type_enum = gen_counter_type_enum_to_gl_type(counter->type); |
| *data_type_enum = gen_counter_data_type_to_gl_type(counter->data_type); |
| *raw_max = counter->raw_max; |
| } |
| |
| /** |
| * Add a query to the global list of "unaccumulated queries." |
| * |
| * Queries are tracked here until all the associated OA reports have |
| * been accumulated via accumulate_oa_reports() after the end |
| * MI_REPORT_PERF_COUNT has landed in query->oa.bo. |
| */ |
| static void |
| add_to_unaccumulated_query_list(struct brw_context *brw, |
| struct gen_perf_query_object *obj) |
| { |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| if (perf_ctx->unaccumulated_elements >= |
| perf_ctx->unaccumulated_array_size) |
| { |
| perf_ctx->unaccumulated_array_size *= 1.5; |
| perf_ctx->unaccumulated = |
| reralloc(brw, perf_ctx->unaccumulated, |
| struct gen_perf_query_object *, |
| perf_ctx->unaccumulated_array_size); |
| } |
| |
| perf_ctx->unaccumulated[perf_ctx->unaccumulated_elements++] = obj; |
| } |
| |
| /** |
| * Remove a query from the global list of unaccumulated queries once |
| * after successfully accumulating the OA reports associated with the |
| * query in accumulate_oa_reports() or when discarding unwanted query |
| * results. |
| */ |
| static void |
| drop_from_unaccumulated_query_list(struct brw_context *brw, |
| struct gen_perf_query_object *obj) |
| { |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| for (int i = 0; i < perf_ctx->unaccumulated_elements; i++) { |
| if (perf_ctx->unaccumulated[i] == obj) { |
| int last_elt = --perf_ctx->unaccumulated_elements; |
| |
| if (i == last_elt) |
| perf_ctx->unaccumulated[i] = NULL; |
| else { |
| perf_ctx->unaccumulated[i] = |
| perf_ctx->unaccumulated[last_elt]; |
| } |
| |
| break; |
| } |
| } |
| |
| /* Drop our samples_head reference so that associated periodic |
| * sample data buffers can potentially be reaped if they aren't |
| * referenced by any other queries... |
| */ |
| |
| struct oa_sample_buf *buf = |
| exec_node_data(struct oa_sample_buf, obj->oa.samples_head, link); |
| |
| assert(buf->refcount > 0); |
| buf->refcount--; |
| |
| obj->oa.samples_head = NULL; |
| |
| gen_perf_reap_old_sample_buffers(&brw->perf_ctx); |
| } |
| |
| static bool |
| inc_n_oa_users(struct brw_context *brw) |
| { |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| if (perf_ctx->n_oa_users == 0 && |
| drmIoctl(perf_ctx->oa_stream_fd, |
| I915_PERF_IOCTL_ENABLE, 0) < 0) |
| { |
| return false; |
| } |
| ++perf_ctx->n_oa_users; |
| |
| return true; |
| } |
| |
| static void |
| dec_n_oa_users(struct brw_context *brw) |
| { |
| /* Disabling the i915 perf stream will effectively disable the OA |
| * counters. Note it's important to be sure there are no outstanding |
| * MI_RPC commands at this point since they could stall the CS |
| * indefinitely once OACONTROL is disabled. |
| */ |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| --perf_ctx->n_oa_users; |
| if (perf_ctx->n_oa_users == 0 && |
| drmIoctl(perf_ctx->oa_stream_fd, I915_PERF_IOCTL_DISABLE, 0) < 0) |
| { |
| DBG("WARNING: Error disabling i915 perf stream: %m\n"); |
| } |
| } |
| |
| /* In general if we see anything spurious while accumulating results, |
| * we don't try and continue accumulating the current query, hoping |
| * for the best, we scrap anything outstanding, and then hope for the |
| * best with new queries. |
| */ |
| static void |
| discard_all_queries(struct brw_context *brw) |
| { |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| while (perf_ctx->unaccumulated_elements) { |
| struct gen_perf_query_object *obj = perf_ctx->unaccumulated[0]; |
| |
| obj->oa.results_accumulated = true; |
| drop_from_unaccumulated_query_list(brw, perf_ctx->unaccumulated[0]); |
| |
| dec_n_oa_users(brw); |
| } |
| } |
| |
| enum OaReadStatus { |
| OA_READ_STATUS_ERROR, |
| OA_READ_STATUS_UNFINISHED, |
| OA_READ_STATUS_FINISHED, |
| }; |
| |
| static enum OaReadStatus |
| read_oa_samples_until(struct brw_context *brw, |
| uint32_t start_timestamp, |
| uint32_t end_timestamp) |
| { |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| struct exec_node *tail_node = |
| exec_list_get_tail(&perf_ctx->sample_buffers); |
| struct oa_sample_buf *tail_buf = |
| exec_node_data(struct oa_sample_buf, tail_node, link); |
| uint32_t last_timestamp = tail_buf->last_timestamp; |
| |
| while (1) { |
| struct oa_sample_buf *buf = gen_perf_get_free_sample_buf(perf_ctx); |
| uint32_t offset; |
| int len; |
| |
| while ((len = read(perf_ctx->oa_stream_fd, buf->buf, |
| sizeof(buf->buf))) < 0 && errno == EINTR) |
| ; |
| |
| if (len <= 0) { |
| exec_list_push_tail(&perf_ctx->free_sample_buffers, &buf->link); |
| |
| if (len < 0) { |
| if (errno == EAGAIN) |
| return ((last_timestamp - start_timestamp) >= |
| (end_timestamp - start_timestamp)) ? |
| OA_READ_STATUS_FINISHED : |
| OA_READ_STATUS_UNFINISHED; |
| else { |
| DBG("Error reading i915 perf samples: %m\n"); |
| } |
| } else |
| DBG("Spurious EOF reading i915 perf samples\n"); |
| |
| return OA_READ_STATUS_ERROR; |
| } |
| |
| buf->len = len; |
| exec_list_push_tail(&perf_ctx->sample_buffers, &buf->link); |
| |
| /* Go through the reports and update the last timestamp. */ |
| offset = 0; |
| while (offset < buf->len) { |
| const struct drm_i915_perf_record_header *header = |
| (const struct drm_i915_perf_record_header *) &buf->buf[offset]; |
| uint32_t *report = (uint32_t *) (header + 1); |
| |
| if (header->type == DRM_I915_PERF_RECORD_SAMPLE) |
| last_timestamp = report[1]; |
| |
| offset += header->size; |
| } |
| |
| buf->last_timestamp = last_timestamp; |
| } |
| |
| unreachable("not reached"); |
| return OA_READ_STATUS_ERROR; |
| } |
| |
| /** |
| * Try to read all the reports until either the delimiting timestamp |
| * or an error arises. |
| */ |
| static bool |
| read_oa_samples_for_query(struct brw_context *brw, |
| struct gen_perf_query_object *obj) |
| { |
| uint32_t *start; |
| uint32_t *last; |
| uint32_t *end; |
| |
| /* We need the MI_REPORT_PERF_COUNT to land before we can start |
| * accumulate. */ |
| assert(!brw_batch_references(&brw->batch, obj->oa.bo) && |
| !brw_bo_busy(obj->oa.bo)); |
| |
| /* Map the BO once here and let accumulate_oa_reports() unmap |
| * it. */ |
| if (obj->oa.map == NULL) |
| obj->oa.map = brw_bo_map(brw, obj->oa.bo, MAP_READ); |
| |
| start = last = obj->oa.map; |
| end = obj->oa.map + MI_RPC_BO_END_OFFSET_BYTES; |
| |
| if (start[0] != obj->oa.begin_report_id) { |
| DBG("Spurious start report id=%"PRIu32"\n", start[0]); |
| return true; |
| } |
| if (end[0] != (obj->oa.begin_report_id + 1)) { |
| DBG("Spurious end report id=%"PRIu32"\n", end[0]); |
| return true; |
| } |
| |
| /* Read the reports until the end timestamp. */ |
| switch (read_oa_samples_until(brw, start[1], end[1])) { |
| case OA_READ_STATUS_ERROR: |
| /* Fallthrough and let accumulate_oa_reports() deal with the |
| * error. */ |
| case OA_READ_STATUS_FINISHED: |
| return true; |
| case OA_READ_STATUS_UNFINISHED: |
| return false; |
| } |
| |
| unreachable("invalid read status"); |
| return false; |
| } |
| |
| /** |
| * Accumulate raw OA counter values based on deltas between pairs of |
| * OA reports. |
| * |
| * Accumulation starts from the first report captured via |
| * MI_REPORT_PERF_COUNT (MI_RPC) by brw_begin_perf_query() until the |
| * last MI_RPC report requested by brw_end_perf_query(). Between these |
| * two reports there may also some number of periodically sampled OA |
| * reports collected via the i915 perf interface - depending on the |
| * duration of the query. |
| * |
| * These periodic snapshots help to ensure we handle counter overflow |
| * correctly by being frequent enough to ensure we don't miss multiple |
| * overflows of a counter between snapshots. For Gen8+ the i915 perf |
| * snapshots provide the extra context-switch reports that let us |
| * subtract out the progress of counters associated with other |
| * contexts running on the system. |
| */ |
| static void |
| accumulate_oa_reports(struct brw_context *brw, |
| struct brw_perf_query_object *brw_query) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| struct gen_perf_query_object *obj = brw_query->query; |
| uint32_t *start; |
| uint32_t *last; |
| uint32_t *end; |
| struct exec_node *first_samples_node; |
| bool in_ctx = true; |
| int out_duration = 0; |
| |
| assert(brw_query->base.Ready); |
| assert(obj->oa.map != NULL); |
| |
| start = last = obj->oa.map; |
| end = obj->oa.map + MI_RPC_BO_END_OFFSET_BYTES; |
| |
| if (start[0] != obj->oa.begin_report_id) { |
| DBG("Spurious start report id=%"PRIu32"\n", start[0]); |
| goto error; |
| } |
| if (end[0] != (obj->oa.begin_report_id + 1)) { |
| DBG("Spurious end report id=%"PRIu32"\n", end[0]); |
| goto error; |
| } |
| |
| /* See if we have any periodic reports to accumulate too... */ |
| |
| /* N.B. The oa.samples_head was set when the query began and |
| * pointed to the tail of the perf_ctx->sample_buffers list at |
| * the time the query started. Since the buffer existed before the |
| * first MI_REPORT_PERF_COUNT command was emitted we therefore know |
| * that no data in this particular node's buffer can possibly be |
| * associated with the query - so skip ahead one... |
| */ |
| first_samples_node = obj->oa.samples_head->next; |
| |
| foreach_list_typed_from(struct oa_sample_buf, buf, link, |
| &brw->perf_ctx.sample_buffers, |
| first_samples_node) |
| { |
| int offset = 0; |
| |
| while (offset < buf->len) { |
| const struct drm_i915_perf_record_header *header = |
| (const struct drm_i915_perf_record_header *)(buf->buf + offset); |
| |
| assert(header->size != 0); |
| assert(header->size <= buf->len); |
| |
| offset += header->size; |
| |
| switch (header->type) { |
| case DRM_I915_PERF_RECORD_SAMPLE: { |
| uint32_t *report = (uint32_t *)(header + 1); |
| bool add = true; |
| |
| /* Ignore reports that come before the start marker. |
| * (Note: takes care to allow overflow of 32bit timestamps) |
| */ |
| if (gen_device_info_timebase_scale(devinfo, |
| report[1] - start[1]) > 5000000000) { |
| continue; |
| } |
| |
| /* Ignore reports that come after the end marker. |
| * (Note: takes care to allow overflow of 32bit timestamps) |
| */ |
| if (gen_device_info_timebase_scale(devinfo, |
| report[1] - end[1]) <= 5000000000) { |
| goto end; |
| } |
| |
| /* For Gen8+ since the counters continue while other |
| * contexts are running we need to discount any unrelated |
| * deltas. The hardware automatically generates a report |
| * on context switch which gives us a new reference point |
| * to continuing adding deltas from. |
| * |
| * For Haswell we can rely on the HW to stop the progress |
| * of OA counters while any other context is acctive. |
| */ |
| if (devinfo->gen >= 8) { |
| if (in_ctx && report[2] != obj->oa.result.hw_id) { |
| DBG("i915 perf: Switch AWAY (observed by ID change)\n"); |
| in_ctx = false; |
| out_duration = 0; |
| } else if (in_ctx == false && report[2] == obj->oa.result.hw_id) { |
| DBG("i915 perf: Switch TO\n"); |
| in_ctx = true; |
| |
| /* From experimentation in IGT, we found that the OA unit |
| * might label some report as "idle" (using an invalid |
| * context ID), right after a report for a given context. |
| * Deltas generated by those reports actually belong to the |
| * previous context, even though they're not labelled as |
| * such. |
| * |
| * We didn't *really* Switch AWAY in the case that we e.g. |
| * saw a single periodic report while idle... |
| */ |
| if (out_duration >= 1) |
| add = false; |
| } else if (in_ctx) { |
| assert(report[2] == obj->oa.result.hw_id); |
| DBG("i915 perf: Continuation IN\n"); |
| } else { |
| assert(report[2] != obj->oa.result.hw_id); |
| DBG("i915 perf: Continuation OUT\n"); |
| add = false; |
| out_duration++; |
| } |
| } |
| |
| if (add) { |
| gen_perf_query_result_accumulate(&obj->oa.result, obj->queryinfo, |
| last, report); |
| } |
| |
| last = report; |
| |
| break; |
| } |
| |
| case DRM_I915_PERF_RECORD_OA_BUFFER_LOST: |
| DBG("i915 perf: OA error: all reports lost\n"); |
| goto error; |
| case DRM_I915_PERF_RECORD_OA_REPORT_LOST: |
| DBG("i915 perf: OA report lost\n"); |
| break; |
| } |
| } |
| } |
| |
| end: |
| |
| gen_perf_query_result_accumulate(&obj->oa.result, obj->queryinfo, |
| last, end); |
| |
| DBG("Marking %d accumulated - results gathered\n", brw_query->base.Id); |
| |
| obj->oa.results_accumulated = true; |
| drop_from_unaccumulated_query_list(brw, obj); |
| dec_n_oa_users(brw); |
| |
| return; |
| |
| error: |
| |
| discard_all_queries(brw); |
| } |
| |
| /******************************************************************************/ |
| |
| static bool |
| open_i915_perf_oa_stream(struct brw_context *brw, |
| int metrics_set_id, |
| int report_format, |
| int period_exponent, |
| int drm_fd, |
| uint32_t ctx_id) |
| { |
| uint64_t properties[] = { |
| /* Single context sampling */ |
| DRM_I915_PERF_PROP_CTX_HANDLE, ctx_id, |
| |
| /* Include OA reports in samples */ |
| DRM_I915_PERF_PROP_SAMPLE_OA, true, |
| |
| /* OA unit configuration */ |
| DRM_I915_PERF_PROP_OA_METRICS_SET, metrics_set_id, |
| DRM_I915_PERF_PROP_OA_FORMAT, report_format, |
| DRM_I915_PERF_PROP_OA_EXPONENT, period_exponent, |
| }; |
| struct drm_i915_perf_open_param param = { |
| .flags = I915_PERF_FLAG_FD_CLOEXEC | |
| I915_PERF_FLAG_FD_NONBLOCK | |
| I915_PERF_FLAG_DISABLED, |
| .num_properties = ARRAY_SIZE(properties) / 2, |
| .properties_ptr = (uintptr_t) properties, |
| }; |
| int fd = drmIoctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m); |
| if (fd == -1) { |
| DBG("Error opening i915 perf OA stream: %m\n"); |
| return false; |
| } |
| |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| perf_ctx->oa_stream_fd = fd; |
| |
| perf_ctx->current_oa_metrics_set_id = metrics_set_id; |
| perf_ctx->current_oa_format = report_format; |
| |
| return true; |
| } |
| |
| static void |
| capture_frequency_stat_register(struct brw_context *brw, |
| struct brw_bo *bo, |
| uint32_t bo_offset) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| |
| if (devinfo->gen >= 7 && devinfo->gen <= 8 && |
| !devinfo->is_baytrail && !devinfo->is_cherryview) { |
| brw_store_register_mem32(brw, bo, GEN7_RPSTAT1, bo_offset); |
| } else if (devinfo->gen >= 9) { |
| brw_store_register_mem32(brw, bo, GEN9_RPSTAT0, bo_offset); |
| } |
| } |
| |
| /** |
| * Driver hook for glBeginPerfQueryINTEL(). |
| */ |
| static bool |
| brw_begin_perf_query(struct gl_context *ctx, |
| struct gl_perf_query_object *o) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct brw_perf_query_object *brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| const struct gen_perf_query_info *query = obj->queryinfo; |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| struct gen_perf_config *perf_cfg = perf_ctx->perf; |
| |
| /* We can assume the frontend hides mistaken attempts to Begin a |
| * query object multiple times before its End. Similarly if an |
| * application reuses a query object before results have arrived |
| * the frontend will wait for prior results so we don't need |
| * to support abandoning in-flight results. |
| */ |
| assert(!o->Active); |
| assert(!o->Used || o->Ready); /* no in-flight query to worry about */ |
| |
| DBG("Begin(%d)\n", o->Id); |
| |
| /* XXX: We have to consider that the command parser unit that parses batch |
| * buffer commands and is used to capture begin/end counter snapshots isn't |
| * implicitly synchronized with what's currently running across other GPU |
| * units (such as the EUs running shaders) that the performance counters are |
| * associated with. |
| * |
| * The intention of performance queries is to measure the work associated |
| * with commands between the begin/end delimiters and so for that to be the |
| * case we need to explicitly synchronize the parsing of commands to capture |
| * Begin/End counter snapshots with what's running across other parts of the |
| * GPU. |
| * |
| * When the command parser reaches a Begin marker it effectively needs to |
| * drain everything currently running on the GPU until the hardware is idle |
| * before capturing the first snapshot of counters - otherwise the results |
| * would also be measuring the effects of earlier commands. |
| * |
| * When the command parser reaches an End marker it needs to stall until |
| * everything currently running on the GPU has finished before capturing the |
| * end snapshot - otherwise the results won't be a complete representation |
| * of the work. |
| * |
| * Theoretically there could be opportunities to minimize how much of the |
| * GPU pipeline is drained, or that we stall for, when we know what specific |
| * units the performance counters being queried relate to but we don't |
| * currently attempt to be clever here. |
| * |
| * Note: with our current simple approach here then for back-to-back queries |
| * we will redundantly emit duplicate commands to synchronize the command |
| * streamer with the rest of the GPU pipeline, but we assume that in HW the |
| * second synchronization is effectively a NOOP. |
| * |
| * N.B. The final results are based on deltas of counters between (inside) |
| * Begin/End markers so even though the total wall clock time of the |
| * workload is stretched by larger pipeline bubbles the bubbles themselves |
| * are generally invisible to the query results. Whether that's a good or a |
| * bad thing depends on the use case. For a lower real-time impact while |
| * capturing metrics then periodic sampling may be a better choice than |
| * INTEL_performance_query. |
| * |
| * |
| * This is our Begin synchronization point to drain current work on the |
| * GPU before we capture our first counter snapshot... |
| */ |
| perf_cfg->vtbl.emit_mi_flush(brw); |
| |
| switch (query->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: { |
| |
| /* Opening an i915 perf stream implies exclusive access to the OA unit |
| * which will generate counter reports for a specific counter set with a |
| * specific layout/format so we can't begin any OA based queries that |
| * require a different counter set or format unless we get an opportunity |
| * to close the stream and open a new one... |
| */ |
| uint64_t metric_id = gen_perf_query_get_metric_id(perf_ctx->perf, query); |
| |
| if (perf_ctx->oa_stream_fd != -1 && |
| perf_ctx->current_oa_metrics_set_id != metric_id) { |
| |
| if (perf_ctx->n_oa_users != 0) { |
| DBG("WARNING: Begin(%d) failed already using perf config=%i/%"PRIu64"\n", |
| o->Id, perf_ctx->current_oa_metrics_set_id, metric_id); |
| return false; |
| } else |
| gen_perf_close(perf_ctx, query); |
| } |
| |
| /* If the OA counters aren't already on, enable them. */ |
| |
| if (perf_ctx->oa_stream_fd == -1) { |
| __DRIscreen *screen = brw->screen->driScrnPriv; |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| |
| /* The period_exponent gives a sampling period as follows: |
| * sample_period = timestamp_period * 2^(period_exponent + 1) |
| * |
| * The timestamps increments every 80ns (HSW), ~52ns (GEN9LP) or |
| * ~83ns (GEN8/9). |
| * |
| * The counter overflow period is derived from the EuActive counter |
| * which reads a counter that increments by the number of clock |
| * cycles multiplied by the number of EUs. It can be calculated as: |
| * |
| * 2^(number of bits in A counter) / (n_eus * max_gen_freq * 2) |
| * |
| * (E.g. 40 EUs @ 1GHz = ~53ms) |
| * |
| * We select a sampling period inferior to that overflow period to |
| * ensure we cannot see more than 1 counter overflow, otherwise we |
| * could loose information. |
| */ |
| |
| int a_counter_in_bits = 32; |
| if (devinfo->gen >= 8) |
| a_counter_in_bits = 40; |
| |
| uint64_t overflow_period = pow(2, a_counter_in_bits) / |
| (perf_cfg->sys_vars.n_eus * |
| /* drop 1GHz freq to have units in nanoseconds */ |
| 2); |
| |
| DBG("A counter overflow period: %"PRIu64"ns, %"PRIu64"ms (n_eus=%"PRIu64")\n", |
| overflow_period, overflow_period / 1000000ul, perf_cfg->sys_vars.n_eus); |
| |
| int period_exponent = 0; |
| uint64_t prev_sample_period, next_sample_period; |
| for (int e = 0; e < 30; e++) { |
| prev_sample_period = 1000000000ull * pow(2, e + 1) / devinfo->timestamp_frequency; |
| next_sample_period = 1000000000ull * pow(2, e + 2) / devinfo->timestamp_frequency; |
| |
| /* Take the previous sampling period, lower than the overflow |
| * period. |
| */ |
| if (prev_sample_period < overflow_period && |
| next_sample_period > overflow_period) |
| period_exponent = e + 1; |
| } |
| |
| if (period_exponent == 0) { |
| DBG("WARNING: enable to find a sampling exponent\n"); |
| return false; |
| } |
| |
| DBG("OA sampling exponent: %i ~= %"PRIu64"ms\n", period_exponent, |
| prev_sample_period / 1000000ul); |
| |
| if (!open_i915_perf_oa_stream(brw, |
| metric_id, |
| query->oa_format, |
| period_exponent, |
| screen->fd, /* drm fd */ |
| brw->hw_ctx)) |
| return false; |
| } else { |
| assert(perf_ctx->current_oa_metrics_set_id == metric_id && |
| perf_ctx->current_oa_format == query->oa_format); |
| } |
| |
| if (!inc_n_oa_users(brw)) { |
| DBG("WARNING: Error enabling i915 perf stream: %m\n"); |
| return false; |
| } |
| |
| if (obj->oa.bo) { |
| perf_cfg->vtbl.bo_unreference(obj->oa.bo); |
| obj->oa.bo = NULL; |
| } |
| |
| obj->oa.bo = |
| brw->perf_ctx.perf->vtbl.bo_alloc(brw->bufmgr, |
| "perf. query OA MI_RPC bo", |
| MI_RPC_BO_SIZE); |
| #ifdef DEBUG |
| /* Pre-filling the BO helps debug whether writes landed. */ |
| void *map = brw_bo_map(brw, obj->oa.bo, MAP_WRITE); |
| memset(map, 0x80, MI_RPC_BO_SIZE); |
| brw_bo_unmap(obj->oa.bo); |
| #endif |
| |
| obj->oa.begin_report_id = perf_ctx->next_query_start_report_id; |
| perf_ctx->next_query_start_report_id += 2; |
| |
| /* We flush the batchbuffer here to minimize the chances that MI_RPC |
| * delimiting commands end up in different batchbuffers. If that's the |
| * case, the measurement will include the time it takes for the kernel |
| * scheduler to load a new request into the hardware. This is manifested in |
| * tools like frameretrace by spikes in the "GPU Core Clocks" counter. |
| */ |
| perf_cfg->vtbl.batchbuffer_flush(brw, __FILE__, __LINE__); |
| |
| /* Take a starting OA counter snapshot. */ |
| perf_cfg->vtbl.emit_mi_report_perf_count(brw, obj->oa.bo, 0, |
| obj->oa.begin_report_id); |
| perf_cfg->vtbl.capture_frequency_stat_register(brw, obj->oa.bo, |
| MI_FREQ_START_OFFSET_BYTES); |
| |
| ++perf_ctx->n_active_oa_queries; |
| |
| /* No already-buffered samples can possibly be associated with this query |
| * so create a marker within the list of sample buffers enabling us to |
| * easily ignore earlier samples when processing this query after |
| * completion. |
| */ |
| assert(!exec_list_is_empty(&perf_ctx->sample_buffers)); |
| obj->oa.samples_head = exec_list_get_tail(&perf_ctx->sample_buffers); |
| |
| struct oa_sample_buf *buf = |
| exec_node_data(struct oa_sample_buf, obj->oa.samples_head, link); |
| |
| /* This reference will ensure that future/following sample |
| * buffers (that may relate to this query) can't be freed until |
| * this drops to zero. |
| */ |
| buf->refcount++; |
| |
| gen_perf_query_result_clear(&obj->oa.result); |
| obj->oa.results_accumulated = false; |
| |
| add_to_unaccumulated_query_list(brw, obj); |
| break; |
| } |
| |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| if (obj->pipeline_stats.bo) { |
| brw->perf_ctx.perf->vtbl.bo_unreference(obj->pipeline_stats.bo); |
| obj->pipeline_stats.bo = NULL; |
| } |
| |
| obj->pipeline_stats.bo = |
| brw->perf_ctx.perf->vtbl.bo_alloc(brw->bufmgr, |
| "perf. query pipeline stats bo", |
| STATS_BO_SIZE); |
| |
| /* Take starting snapshots. */ |
| gen_perf_snapshot_statistics_registers(brw, perf_cfg, obj, 0); |
| |
| ++perf_ctx->n_active_pipeline_stats_queries; |
| break; |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| |
| if (INTEL_DEBUG & DEBUG_PERFMON) |
| dump_perf_queries(brw); |
| |
| return true; |
| } |
| |
| /** |
| * Driver hook for glEndPerfQueryINTEL(). |
| */ |
| static void |
| brw_end_perf_query(struct gl_context *ctx, |
| struct gl_perf_query_object *o) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct brw_perf_query_object *brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| struct gen_perf_config *perf_cfg = brw->perf_ctx.perf; |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| |
| DBG("End(%d)\n", o->Id); |
| |
| /* Ensure that the work associated with the queried commands will have |
| * finished before taking our query end counter readings. |
| * |
| * For more details see comment in brw_begin_perf_query for |
| * corresponding flush. |
| */ |
| perf_cfg->vtbl.emit_mi_flush(brw); |
| |
| switch (obj->queryinfo->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| |
| /* NB: It's possible that the query will have already been marked |
| * as 'accumulated' if an error was seen while reading samples |
| * from perf. In this case we mustn't try and emit a closing |
| * MI_RPC command in case the OA unit has already been disabled |
| */ |
| if (!obj->oa.results_accumulated) { |
| /* Take an ending OA counter snapshot. */ |
| perf_cfg->vtbl.capture_frequency_stat_register(brw, obj->oa.bo, |
| MI_FREQ_END_OFFSET_BYTES); |
| brw->vtbl.emit_mi_report_perf_count(brw, obj->oa.bo, |
| MI_RPC_BO_END_OFFSET_BYTES, |
| obj->oa.begin_report_id + 1); |
| } |
| |
| --perf_ctx->n_active_oa_queries; |
| |
| /* NB: even though the query has now ended, it can't be accumulated |
| * until the end MI_REPORT_PERF_COUNT snapshot has been written |
| * to query->oa.bo |
| */ |
| break; |
| |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| gen_perf_snapshot_statistics_registers(brw, perf_cfg, obj, |
| STATS_BO_END_OFFSET_BYTES); |
| --perf_ctx->n_active_pipeline_stats_queries; |
| break; |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| } |
| |
| static void |
| brw_wait_perf_query(struct gl_context *ctx, struct gl_perf_query_object *o) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct brw_perf_query_object *brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| struct brw_bo *bo = NULL; |
| struct gen_perf_config *perf_cfg = brw->perf_ctx.perf; |
| |
| assert(!o->Ready); |
| |
| switch (obj->queryinfo->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| bo = obj->oa.bo; |
| break; |
| |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| bo = obj->pipeline_stats.bo; |
| break; |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| |
| if (bo == NULL) |
| return; |
| |
| /* If the current batch references our results bo then we need to |
| * flush first... |
| */ |
| if (brw_batch_references(&brw->batch, bo)) |
| perf_cfg->vtbl.batchbuffer_flush(brw, __FILE__, __LINE__); |
| |
| brw_bo_wait_rendering(bo); |
| |
| /* Due to a race condition between the OA unit signaling report |
| * availability and the report actually being written into memory, |
| * we need to wait for all the reports to come in before we can |
| * read them. |
| */ |
| if (obj->queryinfo->kind == GEN_PERF_QUERY_TYPE_OA || |
| obj->queryinfo->kind == GEN_PERF_QUERY_TYPE_RAW) { |
| while (!read_oa_samples_for_query(brw, obj)) |
| ; |
| } |
| } |
| |
| static bool |
| brw_is_perf_query_ready(struct gl_context *ctx, |
| struct gl_perf_query_object *o) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct brw_perf_query_object *brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| |
| if (o->Ready) |
| return true; |
| |
| switch (obj->queryinfo->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| return (obj->oa.results_accumulated || |
| (obj->oa.bo && |
| !brw_batch_references(&brw->batch, obj->oa.bo) && |
| !brw_bo_busy(obj->oa.bo) && |
| read_oa_samples_for_query(brw, obj))); |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| return (obj->pipeline_stats.bo && |
| !brw_batch_references(&brw->batch, obj->pipeline_stats.bo) && |
| !brw_bo_busy(obj->pipeline_stats.bo)); |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| |
| return false; |
| } |
| |
| static void |
| read_slice_unslice_frequencies(struct brw_context *brw, |
| struct gen_perf_query_object *obj) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| uint32_t *begin_report = obj->oa.map, *end_report = obj->oa.map + MI_RPC_BO_END_OFFSET_BYTES; |
| |
| gen_perf_query_result_read_frequencies(&obj->oa.result, |
| devinfo, begin_report, end_report); |
| } |
| |
| static void |
| read_gt_frequency(struct brw_context *brw, |
| struct gen_perf_query_object *obj) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| uint32_t start = *((uint32_t *)(obj->oa.map + MI_FREQ_START_OFFSET_BYTES)), |
| end = *((uint32_t *)(obj->oa.map + MI_FREQ_END_OFFSET_BYTES)); |
| |
| switch (devinfo->gen) { |
| case 7: |
| case 8: |
| obj->oa.gt_frequency[0] = GET_FIELD(start, GEN7_RPSTAT1_CURR_GT_FREQ) * 50ULL; |
| obj->oa.gt_frequency[1] = GET_FIELD(end, GEN7_RPSTAT1_CURR_GT_FREQ) * 50ULL; |
| break; |
| case 9: |
| case 10: |
| case 11: |
| obj->oa.gt_frequency[0] = GET_FIELD(start, GEN9_RPSTAT0_CURR_GT_FREQ) * 50ULL / 3ULL; |
| obj->oa.gt_frequency[1] = GET_FIELD(end, GEN9_RPSTAT0_CURR_GT_FREQ) * 50ULL / 3ULL; |
| break; |
| default: |
| unreachable("unexpected gen"); |
| } |
| |
| /* Put the numbers into Hz. */ |
| obj->oa.gt_frequency[0] *= 1000000ULL; |
| obj->oa.gt_frequency[1] *= 1000000ULL; |
| } |
| |
| static int |
| get_oa_counter_data(struct brw_context *brw, |
| struct gen_perf_query_object *obj, |
| size_t data_size, |
| uint8_t *data) |
| { |
| struct gen_perf_config *perf = brw->perf_ctx.perf; |
| const struct gen_perf_query_info *query = obj->queryinfo; |
| int n_counters = query->n_counters; |
| int written = 0; |
| |
| for (int i = 0; i < n_counters; i++) { |
| const struct gen_perf_query_counter *counter = &query->counters[i]; |
| uint64_t *out_uint64; |
| float *out_float; |
| size_t counter_size = gen_perf_query_counter_get_size(counter); |
| |
| if (counter_size) { |
| switch (counter->data_type) { |
| case GEN_PERF_COUNTER_DATA_TYPE_UINT64: |
| out_uint64 = (uint64_t *)(data + counter->offset); |
| *out_uint64 = |
| counter->oa_counter_read_uint64(perf, query, |
| obj->oa.result.accumulator); |
| break; |
| case GEN_PERF_COUNTER_DATA_TYPE_FLOAT: |
| out_float = (float *)(data + counter->offset); |
| *out_float = |
| counter->oa_counter_read_float(perf, query, |
| obj->oa.result.accumulator); |
| break; |
| default: |
| /* So far we aren't using uint32, double or bool32... */ |
| unreachable("unexpected counter data type"); |
| } |
| written = counter->offset + counter_size; |
| } |
| } |
| |
| return written; |
| } |
| |
| static int |
| get_pipeline_stats_data(struct brw_context *brw, |
| struct gen_perf_query_object *obj, |
| size_t data_size, |
| uint8_t *data) |
| |
| { |
| const struct gen_perf_query_info *query = obj->queryinfo; |
| int n_counters = obj->queryinfo->n_counters; |
| uint8_t *p = data; |
| |
| uint64_t *start = brw_bo_map(brw, obj->pipeline_stats.bo, MAP_READ); |
| uint64_t *end = start + (STATS_BO_END_OFFSET_BYTES / sizeof(uint64_t)); |
| |
| for (int i = 0; i < n_counters; i++) { |
| const struct gen_perf_query_counter *counter = &query->counters[i]; |
| uint64_t value = end[i] - start[i]; |
| |
| if (counter->pipeline_stat.numerator != |
| counter->pipeline_stat.denominator) { |
| value *= counter->pipeline_stat.numerator; |
| value /= counter->pipeline_stat.denominator; |
| } |
| |
| *((uint64_t *)p) = value; |
| p += 8; |
| } |
| |
| brw_bo_unmap(obj->pipeline_stats.bo); |
| |
| return p - data; |
| } |
| |
| /** |
| * Driver hook for glGetPerfQueryDataINTEL(). |
| */ |
| static void |
| brw_get_perf_query_data(struct gl_context *ctx, |
| struct gl_perf_query_object *o, |
| GLsizei data_size, |
| GLuint *data, |
| GLuint *bytes_written) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct brw_perf_query_object *brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| int written = 0; |
| |
| assert(brw_is_perf_query_ready(ctx, o)); |
| |
| DBG("GetData(%d)\n", o->Id); |
| |
| if (INTEL_DEBUG & DEBUG_PERFMON) |
| dump_perf_queries(brw); |
| |
| /* We expect that the frontend only calls this hook when it knows |
| * that results are available. |
| */ |
| assert(o->Ready); |
| |
| switch (obj->queryinfo->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| if (!obj->oa.results_accumulated) { |
| read_gt_frequency(brw, obj); |
| read_slice_unslice_frequencies(brw, obj); |
| accumulate_oa_reports(brw, brw_query); |
| assert(obj->oa.results_accumulated); |
| |
| brw_bo_unmap(obj->oa.bo); |
| obj->oa.map = NULL; |
| } |
| if (obj->queryinfo->kind == GEN_PERF_QUERY_TYPE_OA) { |
| written = get_oa_counter_data(brw, obj, data_size, (uint8_t *)data); |
| } else { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| |
| written = gen_perf_query_result_write_mdapi((uint8_t *)data, data_size, |
| devinfo, &obj->oa.result, |
| obj->oa.gt_frequency[0], |
| obj->oa.gt_frequency[1]); |
| } |
| break; |
| |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| written = get_pipeline_stats_data(brw, obj, data_size, (uint8_t *)data); |
| break; |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| |
| if (bytes_written) |
| *bytes_written = written; |
| } |
| |
| static struct gl_perf_query_object * |
| brw_new_perf_query_object(struct gl_context *ctx, unsigned query_index) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| const struct gen_perf_query_info *queryinfo = |
| &perf_ctx->perf->queries[query_index]; |
| struct gen_perf_query_object *obj = |
| calloc(1, sizeof(struct gen_perf_query_object)); |
| |
| if (!obj) |
| return NULL; |
| |
| obj->queryinfo = queryinfo; |
| |
| perf_ctx->n_query_instances++; |
| |
| struct brw_perf_query_object *brw_query = calloc(1, sizeof(struct brw_perf_query_object)); |
| if (unlikely(!brw_query)) |
| return NULL; |
| brw_query->query = obj; |
| return &brw_query->base; |
| } |
| |
| /** |
| * Driver hook for glDeletePerfQueryINTEL(). |
| */ |
| static void |
| brw_delete_perf_query(struct gl_context *ctx, |
| struct gl_perf_query_object *o) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| struct gen_perf_config *perf_cfg = brw->perf_ctx.perf; |
| struct brw_perf_query_object *brw_query = brw_perf_query(o); |
| struct gen_perf_query_object *obj = brw_query->query; |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| |
| /* We can assume that the frontend waits for a query to complete |
| * before ever calling into here, so we don't have to worry about |
| * deleting an in-flight query object. |
| */ |
| assert(!o->Active); |
| assert(!o->Used || o->Ready); |
| |
| DBG("Delete(%d)\n", o->Id); |
| |
| switch (obj->queryinfo->kind) { |
| case GEN_PERF_QUERY_TYPE_OA: |
| case GEN_PERF_QUERY_TYPE_RAW: |
| if (obj->oa.bo) { |
| if (!obj->oa.results_accumulated) { |
| drop_from_unaccumulated_query_list(brw, obj); |
| dec_n_oa_users(brw); |
| } |
| |
| perf_cfg->vtbl.bo_unreference(obj->oa.bo); |
| obj->oa.bo = NULL; |
| } |
| |
| obj->oa.results_accumulated = false; |
| break; |
| |
| case GEN_PERF_QUERY_TYPE_PIPELINE: |
| if (obj->pipeline_stats.bo) { |
| perf_cfg->vtbl.bo_unreference(obj->pipeline_stats.bo); |
| obj->pipeline_stats.bo = NULL; |
| } |
| break; |
| |
| default: |
| unreachable("Unknown query type"); |
| break; |
| } |
| |
| /* As an indication that the INTEL_performance_query extension is no |
| * longer in use, it's a good time to free our cache of sample |
| * buffers and close any current i915-perf stream. |
| */ |
| if (--perf_ctx->n_query_instances == 0) { |
| gen_perf_free_sample_bufs(perf_ctx); |
| gen_perf_close(perf_ctx, obj->queryinfo); |
| } |
| |
| free(obj); |
| free(brw_query); |
| } |
| |
| /******************************************************************************/ |
| |
| static void |
| init_pipeline_statistic_query_registers(struct brw_context *brw) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| struct gen_perf_config *perf = brw->perf_ctx.perf; |
| struct gen_perf_query_info *query = |
| gen_perf_query_append_query_info(perf, MAX_STAT_COUNTERS); |
| |
| query->kind = GEN_PERF_QUERY_TYPE_PIPELINE; |
| query->name = "Pipeline Statistics Registers"; |
| |
| gen_perf_query_info_add_basic_stat_reg(query, IA_VERTICES_COUNT, |
| "N vertices submitted"); |
| gen_perf_query_info_add_basic_stat_reg(query, IA_PRIMITIVES_COUNT, |
| "N primitives submitted"); |
| gen_perf_query_info_add_basic_stat_reg(query, VS_INVOCATION_COUNT, |
| "N vertex shader invocations"); |
| |
| if (devinfo->gen == 6) { |
| gen_perf_query_info_add_stat_reg(query, GEN6_SO_PRIM_STORAGE_NEEDED, 1, 1, |
| "SO_PRIM_STORAGE_NEEDED", |
| "N geometry shader stream-out primitives (total)"); |
| gen_perf_query_info_add_stat_reg(query, GEN6_SO_NUM_PRIMS_WRITTEN, 1, 1, |
| "SO_NUM_PRIMS_WRITTEN", |
| "N geometry shader stream-out primitives (written)"); |
| } else { |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(0), 1, 1, |
| "SO_PRIM_STORAGE_NEEDED (Stream 0)", |
| "N stream-out (stream 0) primitives (total)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(1), 1, 1, |
| "SO_PRIM_STORAGE_NEEDED (Stream 1)", |
| "N stream-out (stream 1) primitives (total)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(2), 1, 1, |
| "SO_PRIM_STORAGE_NEEDED (Stream 2)", |
| "N stream-out (stream 2) primitives (total)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_PRIM_STORAGE_NEEDED(3), 1, 1, |
| "SO_PRIM_STORAGE_NEEDED (Stream 3)", |
| "N stream-out (stream 3) primitives (total)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(0), 1, 1, |
| "SO_NUM_PRIMS_WRITTEN (Stream 0)", |
| "N stream-out (stream 0) primitives (written)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(1), 1, 1, |
| "SO_NUM_PRIMS_WRITTEN (Stream 1)", |
| "N stream-out (stream 1) primitives (written)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(2), 1, 1, |
| "SO_NUM_PRIMS_WRITTEN (Stream 2)", |
| "N stream-out (stream 2) primitives (written)"); |
| gen_perf_query_info_add_stat_reg(query, GEN7_SO_NUM_PRIMS_WRITTEN(3), 1, 1, |
| "SO_NUM_PRIMS_WRITTEN (Stream 3)", |
| "N stream-out (stream 3) primitives (written)"); |
| } |
| |
| gen_perf_query_info_add_basic_stat_reg(query, HS_INVOCATION_COUNT, |
| "N TCS shader invocations"); |
| gen_perf_query_info_add_basic_stat_reg(query, DS_INVOCATION_COUNT, |
| "N TES shader invocations"); |
| |
| gen_perf_query_info_add_basic_stat_reg(query, GS_INVOCATION_COUNT, |
| "N geometry shader invocations"); |
| gen_perf_query_info_add_basic_stat_reg(query, GS_PRIMITIVES_COUNT, |
| "N geometry shader primitives emitted"); |
| |
| gen_perf_query_info_add_basic_stat_reg(query, CL_INVOCATION_COUNT, |
| "N primitives entering clipping"); |
| gen_perf_query_info_add_basic_stat_reg(query, CL_PRIMITIVES_COUNT, |
| "N primitives leaving clipping"); |
| |
| if (devinfo->is_haswell || devinfo->gen == 8) { |
| gen_perf_query_info_add_stat_reg(query, PS_INVOCATION_COUNT, 1, 4, |
| "N fragment shader invocations", |
| "N fragment shader invocations"); |
| } else { |
| gen_perf_query_info_add_basic_stat_reg(query, PS_INVOCATION_COUNT, |
| "N fragment shader invocations"); |
| } |
| |
| gen_perf_query_info_add_basic_stat_reg(query, PS_DEPTH_COUNT, |
| "N z-pass fragments"); |
| |
| if (devinfo->gen >= 7) { |
| gen_perf_query_info_add_basic_stat_reg(query, CS_INVOCATION_COUNT, |
| "N compute shader invocations"); |
| } |
| |
| query->data_size = sizeof(uint64_t) * query->n_counters; |
| } |
| |
| /* gen_device_info will have incorrect default topology values for unsupported kernels. |
| * verify kernel support to ensure OA metrics are accurate. |
| */ |
| static bool |
| oa_metrics_kernel_support(int fd, const struct gen_device_info *devinfo) |
| { |
| if (devinfo->gen >= 10) { |
| /* topology uAPI required for CNL+ (kernel 4.17+) make a call to the api |
| * to verify support |
| */ |
| struct drm_i915_query_item item = { |
| .query_id = DRM_I915_QUERY_TOPOLOGY_INFO, |
| }; |
| struct drm_i915_query query = { |
| .num_items = 1, |
| .items_ptr = (uintptr_t) &item, |
| }; |
| |
| /* kernel 4.17+ supports the query */ |
| return drmIoctl(fd, DRM_IOCTL_I915_QUERY, &query) == 0; |
| } |
| |
| if (devinfo->gen >= 8) { |
| /* 4.13+ api required for gen8 - gen9 */ |
| int mask; |
| struct drm_i915_getparam gp = { |
| .param = I915_PARAM_SLICE_MASK, |
| .value = &mask, |
| }; |
| /* kernel 4.13+ supports this parameter */ |
| return drmIoctl(fd, DRM_IOCTL_I915_GETPARAM, &gp) == 0; |
| } |
| |
| if (devinfo->gen == 7) |
| /* default topology values are correct for HSW */ |
| return true; |
| |
| /* oa not supported before gen 7*/ |
| return false; |
| } |
| |
| static void * |
| brw_oa_bo_alloc(void *bufmgr, const char *name, uint64_t size) |
| { |
| return brw_bo_alloc(bufmgr, name, size, BRW_MEMZONE_OTHER); |
| } |
| |
| static void |
| brw_oa_emit_mi_report_perf_count(void *c, |
| void *bo, |
| uint32_t offset_in_bytes, |
| uint32_t report_id) |
| { |
| struct brw_context *ctx = c; |
| ctx->vtbl.emit_mi_report_perf_count(ctx, |
| bo, |
| offset_in_bytes, |
| report_id); |
| } |
| |
| typedef void (*bo_unreference_t)(void *); |
| typedef void (* emit_mi_report_t)(void *, void *, uint32_t, uint32_t); |
| typedef void (*emit_mi_flush_t)(void *); |
| |
| static void |
| brw_oa_batchbuffer_flush(void *c, const char *file, int line) |
| { |
| struct brw_context *ctx = c; |
| _intel_batchbuffer_flush_fence(ctx, -1, NULL, file, line); |
| } |
| |
| typedef void (*capture_frequency_stat_register_t)(void *, void *, uint32_t ); |
| typedef void (*store_register_mem64_t)(void *ctx, void *bo, |
| uint32_t reg, uint32_t offset); |
| |
| static unsigned |
| brw_init_perf_query_info(struct gl_context *ctx) |
| { |
| struct brw_context *brw = brw_context(ctx); |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| __DRIscreen *screen = brw->screen->driScrnPriv; |
| |
| struct gen_perf_context *perf_ctx = &brw->perf_ctx; |
| if (perf_ctx->perf) |
| return perf_ctx->perf->n_queries; |
| |
| perf_ctx->perf = gen_perf_new(brw); |
| struct gen_perf_config *perf_cfg = perf_ctx->perf; |
| |
| perf_cfg->vtbl.bo_alloc = brw_oa_bo_alloc; |
| perf_cfg->vtbl.bo_unreference = (bo_unreference_t)brw_bo_unreference; |
| perf_cfg->vtbl.emit_mi_flush = (emit_mi_flush_t)brw_emit_mi_flush; |
| perf_cfg->vtbl.emit_mi_report_perf_count = |
| (emit_mi_report_t)brw_oa_emit_mi_report_perf_count; |
| perf_cfg->vtbl.batchbuffer_flush = brw_oa_batchbuffer_flush; |
| perf_cfg->vtbl.capture_frequency_stat_register = |
| (capture_frequency_stat_register_t) capture_frequency_stat_register; |
| perf_cfg->vtbl.store_register_mem64 = |
| (store_register_mem64_t) brw_store_register_mem64; |
| |
| init_pipeline_statistic_query_registers(brw); |
| gen_perf_query_register_mdapi_statistic_query(&brw->screen->devinfo, |
| brw->perf_ctx.perf); |
| |
| if ((oa_metrics_kernel_support(screen->fd, devinfo)) && |
| (gen_perf_load_oa_metrics(perf_cfg, screen->fd, devinfo))) |
| gen_perf_query_register_mdapi_oa_query(devinfo, perf_cfg); |
| |
| perf_ctx->unaccumulated = |
| ralloc_array(brw, struct gen_perf_query_object *, 2); |
| perf_ctx->unaccumulated_elements = 0; |
| perf_ctx->unaccumulated_array_size = 2; |
| |
| exec_list_make_empty(&perf_ctx->sample_buffers); |
| exec_list_make_empty(&perf_ctx->free_sample_buffers); |
| |
| /* It's convenient to guarantee that this linked list of sample |
| * buffers is never empty so we add an empty head so when we |
| * Begin an OA query we can always take a reference on a buffer |
| * in this list. |
| */ |
| struct oa_sample_buf *buf = gen_perf_get_free_sample_buf(&brw->perf_ctx); |
| exec_list_push_head(&perf_ctx->sample_buffers, &buf->link); |
| |
| perf_ctx->oa_stream_fd = -1; |
| |
| perf_ctx->next_query_start_report_id = 1000; |
| |
| return perf_cfg->n_queries; |
| } |
| |
| void |
| brw_init_performance_queries(struct brw_context *brw) |
| { |
| struct gl_context *ctx = &brw->ctx; |
| |
| ctx->Driver.InitPerfQueryInfo = brw_init_perf_query_info; |
| ctx->Driver.GetPerfQueryInfo = brw_get_perf_query_info; |
| ctx->Driver.GetPerfCounterInfo = brw_get_perf_counter_info; |
| ctx->Driver.NewPerfQueryObject = brw_new_perf_query_object; |
| ctx->Driver.DeletePerfQuery = brw_delete_perf_query; |
| ctx->Driver.BeginPerfQuery = brw_begin_perf_query; |
| ctx->Driver.EndPerfQuery = brw_end_perf_query; |
| ctx->Driver.WaitPerfQuery = brw_wait_perf_query; |
| ctx->Driver.IsPerfQueryReady = brw_is_perf_query_ready; |
| ctx->Driver.GetPerfQueryData = brw_get_perf_query_data; |
| } |