| /* |
| * Copyright 2016 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include <stdint.h> |
| |
| #define __gen_address_type uint64_t |
| #define __gen_user_data void |
| |
| static uint64_t |
| __gen_combine_address(__attribute__((unused)) void *data, |
| __attribute__((unused)) void *loc, uint64_t addr, |
| uint32_t delta) |
| { |
| return addr + delta; |
| } |
| |
| #include "genxml/gen_macros.h" |
| #include "genxml/genX_pack.h" |
| |
| #include "isl_priv.h" |
| |
| #if GEN_GEN >= 8 |
| static const uint8_t isl_to_gen_halign[] = { |
| [4] = HALIGN4, |
| [8] = HALIGN8, |
| [16] = HALIGN16, |
| }; |
| #elif GEN_GEN >= 7 |
| static const uint8_t isl_to_gen_halign[] = { |
| [4] = HALIGN_4, |
| [8] = HALIGN_8, |
| }; |
| #endif |
| |
| #if GEN_GEN >= 8 |
| static const uint8_t isl_to_gen_valign[] = { |
| [4] = VALIGN4, |
| [8] = VALIGN8, |
| [16] = VALIGN16, |
| }; |
| #elif GEN_GEN >= 6 |
| static const uint8_t isl_to_gen_valign[] = { |
| [2] = VALIGN_2, |
| [4] = VALIGN_4, |
| }; |
| #endif |
| |
| #if GEN_GEN >= 8 |
| static const uint8_t isl_to_gen_tiling[] = { |
| [ISL_TILING_LINEAR] = LINEAR, |
| [ISL_TILING_X] = XMAJOR, |
| [ISL_TILING_Y0] = YMAJOR, |
| [ISL_TILING_Yf] = YMAJOR, |
| [ISL_TILING_Ys] = YMAJOR, |
| [ISL_TILING_W] = WMAJOR, |
| }; |
| #endif |
| |
| #if GEN_GEN >= 7 |
| static const uint32_t isl_to_gen_multisample_layout[] = { |
| [ISL_MSAA_LAYOUT_NONE] = MSFMT_MSS, |
| [ISL_MSAA_LAYOUT_INTERLEAVED] = MSFMT_DEPTH_STENCIL, |
| [ISL_MSAA_LAYOUT_ARRAY] = MSFMT_MSS, |
| }; |
| #endif |
| |
| #if GEN_GEN >= 9 |
| static const uint32_t isl_to_gen_aux_mode[] = { |
| [ISL_AUX_USAGE_NONE] = AUX_NONE, |
| [ISL_AUX_USAGE_HIZ] = AUX_HIZ, |
| [ISL_AUX_USAGE_MCS] = AUX_CCS_D, |
| [ISL_AUX_USAGE_CCS_D] = AUX_CCS_D, |
| [ISL_AUX_USAGE_CCS_E] = AUX_CCS_E, |
| }; |
| #elif GEN_GEN >= 8 |
| static const uint32_t isl_to_gen_aux_mode[] = { |
| [ISL_AUX_USAGE_NONE] = AUX_NONE, |
| [ISL_AUX_USAGE_HIZ] = AUX_HIZ, |
| [ISL_AUX_USAGE_MCS] = AUX_MCS, |
| [ISL_AUX_USAGE_CCS_D] = AUX_MCS, |
| }; |
| #endif |
| |
| static uint8_t |
| get_surftype(enum isl_surf_dim dim, isl_surf_usage_flags_t usage) |
| { |
| switch (dim) { |
| default: |
| unreachable("bad isl_surf_dim"); |
| case ISL_SURF_DIM_1D: |
| assert(!(usage & ISL_SURF_USAGE_CUBE_BIT)); |
| return SURFTYPE_1D; |
| case ISL_SURF_DIM_2D: |
| if ((usage & ISL_SURF_USAGE_CUBE_BIT) && |
| (usage & ISL_SURF_USAGE_TEXTURE_BIT)) { |
| /* We need SURFTYPE_CUBE to make cube sampling work */ |
| return SURFTYPE_CUBE; |
| } else { |
| /* Everything else (render and storage) treat cubes as plain |
| * 2D array textures |
| */ |
| return SURFTYPE_2D; |
| } |
| case ISL_SURF_DIM_3D: |
| assert(!(usage & ISL_SURF_USAGE_CUBE_BIT)); |
| return SURFTYPE_3D; |
| } |
| } |
| |
| /** |
| * Get the horizontal and vertical alignment in the units expected by the |
| * hardware. Note that this does NOT give you the actual hardware enum values |
| * but an index into the isl_to_gen_[hv]align arrays above. |
| */ |
| UNUSED static struct isl_extent3d |
| get_image_alignment(const struct isl_surf *surf) |
| { |
| if (GEN_GEN >= 9) { |
| if (isl_tiling_is_std_y(surf->tiling) || |
| surf->dim_layout == ISL_DIM_LAYOUT_GEN9_1D) { |
| /* The hardware ignores the alignment values. Anyway, the surface's |
| * true alignment is likely outside the enum range of HALIGN* and |
| * VALIGN*. |
| */ |
| return isl_extent3d(4, 4, 1); |
| } else { |
| /* In Skylake, RENDER_SUFFACE_STATE.SurfaceVerticalAlignment is in units |
| * of surface elements (not pixels nor samples). For compressed formats, |
| * a "surface element" is defined as a compression block. For example, |
| * if SurfaceVerticalAlignment is VALIGN_4 and SurfaceFormat is an ETC2 |
| * format (ETC2 has a block height of 4), then the vertical alignment is |
| * 4 compression blocks or, equivalently, 16 pixels. |
| */ |
| return isl_surf_get_image_alignment_el(surf); |
| } |
| } else { |
| /* Pre-Skylake, RENDER_SUFFACE_STATE.SurfaceVerticalAlignment is in |
| * units of surface samples. For example, if SurfaceVerticalAlignment |
| * is VALIGN_4 and the surface is singlesampled, then for any surface |
| * format (compressed or not) the vertical alignment is |
| * 4 pixels. |
| */ |
| return isl_surf_get_image_alignment_sa(surf); |
| } |
| } |
| |
| #if GEN_GEN >= 8 |
| static uint32_t |
| get_qpitch(const struct isl_surf *surf) |
| { |
| switch (surf->dim_layout) { |
| default: |
| unreachable("Bad isl_surf_dim"); |
| case ISL_DIM_LAYOUT_GEN4_2D: |
| if (GEN_GEN >= 9) { |
| if (surf->dim == ISL_SURF_DIM_3D && surf->tiling == ISL_TILING_W) { |
| /* This is rather annoying and completely undocumented. It |
| * appears that the hardware has a bug (or undocumented feature) |
| * regarding stencil buffers most likely related to the way |
| * W-tiling is handled as modified Y-tiling. If you bind a 3-D |
| * stencil buffer normally, and use texelFetch on it, the z or |
| * array index will get implicitly multiplied by 2 for no obvious |
| * reason. The fix appears to be to divide qpitch by 2 for |
| * W-tiled surfaces. |
| */ |
| return isl_surf_get_array_pitch_el_rows(surf) / 2; |
| } else { |
| return isl_surf_get_array_pitch_el_rows(surf); |
| } |
| } else { |
| /* From the Broadwell PRM for RENDER_SURFACE_STATE.QPitch |
| * |
| * "This field must be set to an integer multiple of the Surface |
| * Vertical Alignment. For compressed textures (BC*, FXT1, |
| * ETC*, and EAC* Surface Formats), this field is in units of |
| * rows in the uncompressed surface, and must be set to an |
| * integer multiple of the vertical alignment parameter "j" |
| * defined in the Common Surface Formats section." |
| */ |
| return isl_surf_get_array_pitch_sa_rows(surf); |
| } |
| case ISL_DIM_LAYOUT_GEN9_1D: |
| /* QPitch is usually expressed as rows of surface elements (where |
| * a surface element is an compression block or a single surface |
| * sample). Skylake 1D is an outlier. |
| * |
| * From the Skylake BSpec >> Memory Views >> Common Surface |
| * Formats >> Surface Layout and Tiling >> 1D Surfaces: |
| * |
| * Surface QPitch specifies the distance in pixels between array |
| * slices. |
| */ |
| return isl_surf_get_array_pitch_el(surf); |
| case ISL_DIM_LAYOUT_GEN4_3D: |
| /* QPitch doesn't make sense for ISL_DIM_LAYOUT_GEN4_3D since it uses a |
| * different pitch at each LOD. Also, the QPitch field is ignored for |
| * these surfaces. From the Broadwell PRM documentation for QPitch: |
| * |
| * This field specifies the distance in rows between array slices. It |
| * is used only in the following cases: |
| * - Surface Array is enabled OR |
| * - Number of Mulitsamples is not NUMSAMPLES_1 and Multisampled |
| * Surface Storage Format set to MSFMT_MSS OR |
| * - Surface Type is SURFTYPE_CUBE |
| * |
| * None of the three conditions above can possibly apply to a 3D surface |
| * so it is safe to just set QPitch to 0. |
| */ |
| return 0; |
| } |
| } |
| #endif /* GEN_GEN >= 8 */ |
| |
| void |
| isl_genX(surf_fill_state_s)(const struct isl_device *dev, void *state, |
| const struct isl_surf_fill_state_info *restrict info) |
| { |
| struct GENX(RENDER_SURFACE_STATE) s = { 0 }; |
| |
| s.SurfaceType = get_surftype(info->surf->dim, info->view->usage); |
| |
| if (info->view->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) |
| assert(isl_format_supports_rendering(dev->info, info->view->format)); |
| else if (info->view->usage & ISL_SURF_USAGE_TEXTURE_BIT) |
| assert(isl_format_supports_sampling(dev->info, info->view->format)); |
| |
| /* From the Sky Lake PRM Vol. 2d, RENDER_SURFACE_STATE::SurfaceFormat |
| * |
| * This field cannot be a compressed (BC*, DXT*, FXT*, ETC*, EAC*) |
| * format if the Surface Type is SURFTYPE_1D |
| */ |
| if (info->surf->dim == ISL_SURF_DIM_1D) |
| assert(!isl_format_is_compressed(info->view->format)); |
| |
| if (isl_format_is_compressed(info->surf->format)) { |
| /* You're not allowed to make a view of a compressed format with any |
| * format other than the surface format. None of the userspace APIs |
| * allow for this directly and doing so would mess up a number of |
| * surface parameters such as Width, Height, and alignments. Ideally, |
| * we'd like to assert that the two formats match. However, we have an |
| * S3TC workaround that requires us to do reinterpretation. So assert |
| * that they're at least the same bpb and block size. |
| */ |
| MAYBE_UNUSED const struct isl_format_layout *surf_fmtl = |
| isl_format_get_layout(info->surf->format); |
| MAYBE_UNUSED const struct isl_format_layout *view_fmtl = |
| isl_format_get_layout(info->surf->format); |
| assert(surf_fmtl->bpb == view_fmtl->bpb); |
| assert(surf_fmtl->bw == view_fmtl->bw); |
| assert(surf_fmtl->bh == view_fmtl->bh); |
| } |
| |
| s.SurfaceFormat = info->view->format; |
| |
| #if GEN_GEN <= 5 |
| s.ColorBufferComponentWriteDisables = info->write_disables; |
| #else |
| assert(info->write_disables == 0); |
| #endif |
| |
| #if GEN_IS_HASWELL |
| s.IntegerSurfaceFormat = |
| isl_format_has_int_channel((enum isl_format) s.SurfaceFormat); |
| #endif |
| |
| assert(info->surf->logical_level0_px.width > 0 && |
| info->surf->logical_level0_px.height > 0); |
| |
| s.Width = info->surf->logical_level0_px.width - 1; |
| s.Height = info->surf->logical_level0_px.height - 1; |
| |
| /* In the gen6 PRM Volume 1 Part 1: Graphics Core, Section 7.18.3.7.1 |
| * (Surface Arrays For all surfaces other than separate stencil buffer): |
| * |
| * "[DevSNB] Errata: Sampler MSAA Qpitch will be 4 greater than the value |
| * calculated in the equation above , for every other odd Surface Height |
| * starting from 1 i.e. 1,5,9,13" |
| * |
| * Since this Qpitch errata only impacts the sampler, we have to adjust the |
| * input for the rendering surface to achieve the same qpitch. For the |
| * affected heights, we increment the height by 1 for the rendering |
| * surface. |
| */ |
| if (GEN_GEN == 6 && (info->view->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) && |
| info->surf->samples > 1 && |
| (info->surf->logical_level0_px.height % 4) == 1) |
| s.Height++; |
| |
| switch (s.SurfaceType) { |
| case SURFTYPE_1D: |
| case SURFTYPE_2D: |
| /* From the Ivy Bridge PRM >> RENDER_SURFACE_STATE::MinimumArrayElement: |
| * |
| * "If Number of Multisamples is not MULTISAMPLECOUNT_1, this field |
| * must be set to zero if this surface is used with sampling engine |
| * messages." |
| * |
| * This restriction appears to exist only on Ivy Bridge. |
| */ |
| if (GEN_GEN == 7 && !GEN_IS_HASWELL && !ISL_DEV_IS_BAYTRAIL(dev) && |
| (info->view->usage & ISL_SURF_USAGE_TEXTURE_BIT) && |
| info->surf->samples > 1) |
| assert(info->view->base_array_layer == 0); |
| |
| s.MinimumArrayElement = info->view->base_array_layer; |
| |
| /* From the Broadwell PRM >> RENDER_SURFACE_STATE::Depth: |
| * |
| * For SURFTYPE_1D, 2D, and CUBE: The range of this field is reduced |
| * by one for each increase from zero of Minimum Array Element. For |
| * example, if Minimum Array Element is set to 1024 on a 2D surface, |
| * the range of this field is reduced to [0,1023]. |
| * |
| * In other words, 'Depth' is the number of array layers. |
| */ |
| s.Depth = info->view->array_len - 1; |
| |
| /* From the Broadwell PRM >> RENDER_SURFACE_STATE::RenderTargetViewExtent: |
| * |
| * For Render Target and Typed Dataport 1D and 2D Surfaces: |
| * This field must be set to the same value as the Depth field. |
| */ |
| if (info->view->usage & (ISL_SURF_USAGE_RENDER_TARGET_BIT | |
| ISL_SURF_USAGE_STORAGE_BIT)) |
| s.RenderTargetViewExtent = s.Depth; |
| break; |
| case SURFTYPE_CUBE: |
| s.MinimumArrayElement = info->view->base_array_layer; |
| /* Same as SURFTYPE_2D, but divided by 6 */ |
| s.Depth = info->view->array_len / 6 - 1; |
| if (info->view->usage & (ISL_SURF_USAGE_RENDER_TARGET_BIT | |
| ISL_SURF_USAGE_STORAGE_BIT)) |
| s.RenderTargetViewExtent = s.Depth; |
| break; |
| case SURFTYPE_3D: |
| /* From the Broadwell PRM >> RENDER_SURFACE_STATE::Depth: |
| * |
| * If the volume texture is MIP-mapped, this field specifies the |
| * depth of the base MIP level. |
| */ |
| s.Depth = info->surf->logical_level0_px.depth - 1; |
| |
| /* From the Broadwell PRM >> RENDER_SURFACE_STATE::RenderTargetViewExtent: |
| * |
| * For Render Target and Typed Dataport 3D Surfaces: This field |
| * indicates the extent of the accessible 'R' coordinates minus 1 on |
| * the LOD currently being rendered to. |
| * |
| * The docs specify that this only matters for render targets and |
| * surfaces used with typed dataport messages. Prior to Ivy Bridge, the |
| * Depth field has more bits than RenderTargetViewExtent so we can have |
| * textures with more levels than we can render to. In order to prevent |
| * assert-failures in the packing function below, we only set the field |
| * when it's actually going to be used by the hardware. |
| * |
| * Similaraly, the MinimumArrayElement field is ignored by all hardware |
| * prior to Sky Lake when texturing and we want it set to 0 anyway. |
| * Since it's already initialized to 0, we can just leave it alone for |
| * texture surfaces. |
| */ |
| if (info->view->usage & (ISL_SURF_USAGE_RENDER_TARGET_BIT | |
| ISL_SURF_USAGE_STORAGE_BIT)) { |
| s.MinimumArrayElement = info->view->base_array_layer; |
| s.RenderTargetViewExtent = info->view->array_len - 1; |
| } |
| break; |
| default: |
| unreachable("bad SurfaceType"); |
| } |
| |
| #if GEN_GEN >= 7 |
| s.SurfaceArray = info->surf->dim != ISL_SURF_DIM_3D; |
| #endif |
| |
| if (info->view->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) { |
| /* For render target surfaces, the hardware interprets field |
| * MIPCount/LOD as LOD. The Broadwell PRM says: |
| * |
| * MIPCountLOD defines the LOD that will be rendered into. |
| * SurfaceMinLOD is ignored. |
| */ |
| s.MIPCountLOD = info->view->base_level; |
| s.SurfaceMinLOD = 0; |
| } else { |
| /* For non render target surfaces, the hardware interprets field |
| * MIPCount/LOD as MIPCount. The range of levels accessible by the |
| * sampler engine is [SurfaceMinLOD, SurfaceMinLOD + MIPCountLOD]. |
| */ |
| s.SurfaceMinLOD = info->view->base_level; |
| s.MIPCountLOD = MAX(info->view->levels, 1) - 1; |
| } |
| |
| #if GEN_GEN >= 9 |
| /* We don't use miptails yet. The PRM recommends that you set "Mip Tail |
| * Start LOD" to 15 to prevent the hardware from trying to use them. |
| */ |
| s.TiledResourceMode = NONE; |
| s.MipTailStartLOD = 15; |
| #endif |
| |
| #if GEN_GEN >= 6 |
| const struct isl_extent3d image_align = get_image_alignment(info->surf); |
| s.SurfaceVerticalAlignment = isl_to_gen_valign[image_align.height]; |
| #if GEN_GEN >= 7 |
| s.SurfaceHorizontalAlignment = isl_to_gen_halign[image_align.width]; |
| #endif |
| #endif |
| |
| if (info->surf->dim_layout == ISL_DIM_LAYOUT_GEN9_1D) { |
| /* For gen9 1-D textures, surface pitch is ignored */ |
| s.SurfacePitch = 0; |
| } else { |
| s.SurfacePitch = info->surf->row_pitch_B - 1; |
| } |
| |
| #if GEN_GEN >= 8 |
| s.SurfaceQPitch = get_qpitch(info->surf) >> 2; |
| #elif GEN_GEN == 7 |
| s.SurfaceArraySpacing = info->surf->array_pitch_span == |
| ISL_ARRAY_PITCH_SPAN_COMPACT; |
| #endif |
| |
| #if GEN_GEN >= 8 |
| s.TileMode = isl_to_gen_tiling[info->surf->tiling]; |
| #else |
| s.TiledSurface = info->surf->tiling != ISL_TILING_LINEAR, |
| s.TileWalk = info->surf->tiling == ISL_TILING_Y0 ? TILEWALK_YMAJOR : |
| TILEWALK_XMAJOR, |
| #endif |
| |
| #if GEN_GEN >= 8 |
| s.RenderCacheReadWriteMode = WriteOnlyCache; |
| #else |
| s.RenderCacheReadWriteMode = 0; |
| #endif |
| |
| s.CubeFaceEnablePositiveZ = 1; |
| s.CubeFaceEnableNegativeZ = 1; |
| s.CubeFaceEnablePositiveY = 1; |
| s.CubeFaceEnableNegativeY = 1; |
| s.CubeFaceEnablePositiveX = 1; |
| s.CubeFaceEnableNegativeX = 1; |
| |
| #if GEN_GEN >= 6 |
| s.NumberofMultisamples = ffs(info->surf->samples) - 1; |
| #if GEN_GEN >= 7 |
| s.MultisampledSurfaceStorageFormat = |
| isl_to_gen_multisample_layout[info->surf->msaa_layout]; |
| #endif |
| #endif |
| |
| #if (GEN_GEN >= 8 || GEN_IS_HASWELL) |
| if (info->view->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) |
| assert(isl_swizzle_supports_rendering(dev->info, info->view->swizzle)); |
| |
| s.ShaderChannelSelectRed = (enum GENX(ShaderChannelSelect)) info->view->swizzle.r; |
| s.ShaderChannelSelectGreen = (enum GENX(ShaderChannelSelect)) info->view->swizzle.g; |
| s.ShaderChannelSelectBlue = (enum GENX(ShaderChannelSelect)) info->view->swizzle.b; |
| s.ShaderChannelSelectAlpha = (enum GENX(ShaderChannelSelect)) info->view->swizzle.a; |
| #else |
| assert(isl_swizzle_is_identity(info->view->swizzle)); |
| #endif |
| |
| s.SurfaceBaseAddress = info->address; |
| |
| #if GEN_GEN >= 6 |
| s.MOCS = info->mocs; |
| #endif |
| |
| #if GEN_GEN > 4 || GEN_IS_G4X |
| if (info->x_offset_sa != 0 || info->y_offset_sa != 0) { |
| /* There are fairly strict rules about when the offsets can be used. |
| * These are mostly taken from the Sky Lake PRM documentation for |
| * RENDER_SURFACE_STATE. |
| */ |
| assert(info->surf->tiling != ISL_TILING_LINEAR); |
| assert(info->surf->dim == ISL_SURF_DIM_2D); |
| assert(isl_is_pow2(isl_format_get_layout(info->view->format)->bpb)); |
| assert(info->surf->levels == 1); |
| assert(info->surf->logical_level0_px.array_len == 1); |
| assert(info->aux_usage == ISL_AUX_USAGE_NONE); |
| |
| if (GEN_GEN >= 8) { |
| /* Broadwell added more rules. */ |
| assert(info->surf->samples == 1); |
| if (isl_format_get_layout(info->view->format)->bpb == 8) |
| assert(info->x_offset_sa % 16 == 0); |
| if (isl_format_get_layout(info->view->format)->bpb == 16) |
| assert(info->x_offset_sa % 8 == 0); |
| } |
| |
| #if GEN_GEN >= 7 |
| s.SurfaceArray = false; |
| #endif |
| } |
| |
| const unsigned x_div = 4; |
| const unsigned y_div = GEN_GEN >= 8 ? 4 : 2; |
| assert(info->x_offset_sa % x_div == 0); |
| assert(info->y_offset_sa % y_div == 0); |
| s.XOffset = info->x_offset_sa / x_div; |
| s.YOffset = info->y_offset_sa / y_div; |
| #else |
| assert(info->x_offset_sa == 0); |
| assert(info->y_offset_sa == 0); |
| #endif |
| |
| #if GEN_GEN >= 7 |
| if (info->aux_surf && info->aux_usage != ISL_AUX_USAGE_NONE) { |
| /* The docs don't appear to say anything whatsoever about compression |
| * and the data port. Testing seems to indicate that the data port |
| * completely ignores the AuxiliarySurfaceMode field. |
| */ |
| assert(!(info->view->usage & ISL_SURF_USAGE_STORAGE_BIT)); |
| |
| struct isl_tile_info tile_info; |
| isl_surf_get_tile_info(info->aux_surf, &tile_info); |
| uint32_t pitch_in_tiles = |
| info->aux_surf->row_pitch_B / tile_info.phys_extent_B.width; |
| |
| s.AuxiliarySurfaceBaseAddress = info->aux_address; |
| s.AuxiliarySurfacePitch = pitch_in_tiles - 1; |
| |
| #if GEN_GEN >= 8 |
| assert(GEN_GEN >= 9 || info->aux_usage != ISL_AUX_USAGE_CCS_E); |
| /* Auxiliary surfaces in ISL have compressed formats but the hardware |
| * doesn't expect our definition of the compression, it expects qpitch |
| * in units of samples on the main surface. |
| */ |
| s.AuxiliarySurfaceQPitch = |
| isl_surf_get_array_pitch_sa_rows(info->aux_surf) >> 2; |
| |
| if (info->aux_usage == ISL_AUX_USAGE_HIZ) { |
| /* The number of samples must be 1 */ |
| assert(info->surf->samples == 1); |
| |
| /* The dimension must not be 3D */ |
| assert(info->surf->dim != ISL_SURF_DIM_3D); |
| |
| /* The format must be one of the following: */ |
| switch (info->view->format) { |
| case ISL_FORMAT_R32_FLOAT: |
| case ISL_FORMAT_R24_UNORM_X8_TYPELESS: |
| case ISL_FORMAT_R16_UNORM: |
| break; |
| default: |
| assert(!"Incompatible HiZ Sampling format"); |
| break; |
| } |
| } |
| |
| s.AuxiliarySurfaceMode = isl_to_gen_aux_mode[info->aux_usage]; |
| #else |
| assert(info->aux_usage == ISL_AUX_USAGE_MCS || |
| info->aux_usage == ISL_AUX_USAGE_CCS_D); |
| s.MCSEnable = true; |
| #endif |
| } |
| #endif |
| |
| #if GEN_GEN >= 8 |
| /* From the CHV PRM, Volume 2d, page 321 (RENDER_SURFACE_STATE dword 0 |
| * bit 9 "Sampler L2 Bypass Mode Disable" Programming Notes): |
| * |
| * This bit must be set for the following surface types: BC2_UNORM |
| * BC3_UNORM BC5_UNORM BC5_SNORM BC7_UNORM |
| */ |
| if (GEN_GEN >= 9 || dev->info->is_cherryview) { |
| switch (info->view->format) { |
| case ISL_FORMAT_BC2_UNORM: |
| case ISL_FORMAT_BC3_UNORM: |
| case ISL_FORMAT_BC5_UNORM: |
| case ISL_FORMAT_BC5_SNORM: |
| case ISL_FORMAT_BC7_UNORM: |
| s.SamplerL2BypassModeDisable = true; |
| break; |
| default: |
| /* From the SKL PRM, Programming Note under Sampler Output Channel |
| * Mapping: |
| * |
| * If a surface has an associated HiZ Auxilliary surface, the |
| * Sampler L2 Bypass Mode Disable field in the RENDER_SURFACE_STATE |
| * must be set. |
| */ |
| if (GEN_GEN >= 9 && info->aux_usage == ISL_AUX_USAGE_HIZ) |
| s.SamplerL2BypassModeDisable = true; |
| break; |
| } |
| } |
| #endif |
| |
| if (info->aux_usage != ISL_AUX_USAGE_NONE) { |
| if (info->use_clear_address) { |
| #if GEN_GEN >= 10 |
| s.ClearValueAddressEnable = true; |
| s.ClearValueAddress = info->clear_address; |
| #else |
| unreachable("Gen9 and earlier do not support indirect clear colors"); |
| #endif |
| } |
| |
| #if GEN_GEN == 11 |
| /* |
| * From BXML > GT > Shared Functions > vol5c Shared Functions > |
| * [Structure] RENDER_SURFACE_STATE [BDW+] > ClearColorConversionEnable: |
| * |
| * Project: Gen11 |
| * |
| * "Enables Pixel backend hw to convert clear values into native format |
| * and write back to clear address, so that display and sampler can use |
| * the converted value for resolving fast cleared RTs." |
| * |
| * Summary: |
| * Clear color conversion must be enabled if the clear color is stored |
| * indirectly and fast color clears are enabled. |
| */ |
| if (info->use_clear_address) { |
| s.ClearColorConversionEnable = true; |
| } |
| #endif |
| |
| #if GEN_GEN >= 9 |
| if (!info->use_clear_address) { |
| s.RedClearColor = info->clear_color.u32[0]; |
| s.GreenClearColor = info->clear_color.u32[1]; |
| s.BlueClearColor = info->clear_color.u32[2]; |
| s.AlphaClearColor = info->clear_color.u32[3]; |
| } |
| #elif GEN_GEN >= 7 |
| /* Prior to Sky Lake, we only have one bit for the clear color which |
| * gives us 0 or 1 in whatever the surface's format happens to be. |
| */ |
| if (isl_format_has_int_channel(info->view->format)) { |
| for (unsigned i = 0; i < 4; i++) { |
| assert(info->clear_color.u32[i] == 0 || |
| info->clear_color.u32[i] == 1); |
| } |
| s.RedClearColor = info->clear_color.u32[0] != 0; |
| s.GreenClearColor = info->clear_color.u32[1] != 0; |
| s.BlueClearColor = info->clear_color.u32[2] != 0; |
| s.AlphaClearColor = info->clear_color.u32[3] != 0; |
| } else { |
| for (unsigned i = 0; i < 4; i++) { |
| assert(info->clear_color.f32[i] == 0.0f || |
| info->clear_color.f32[i] == 1.0f); |
| } |
| s.RedClearColor = info->clear_color.f32[0] != 0.0f; |
| s.GreenClearColor = info->clear_color.f32[1] != 0.0f; |
| s.BlueClearColor = info->clear_color.f32[2] != 0.0f; |
| s.AlphaClearColor = info->clear_color.f32[3] != 0.0f; |
| } |
| #endif |
| } |
| |
| GENX(RENDER_SURFACE_STATE_pack)(NULL, state, &s); |
| } |
| |
| void |
| isl_genX(buffer_fill_state_s)(void *state, |
| const struct isl_buffer_fill_state_info *restrict info) |
| { |
| uint64_t buffer_size = info->size_B; |
| |
| /* Uniform and Storage buffers need to have surface size not less that the |
| * aligned 32-bit size of the buffer. To calculate the array lenght on |
| * unsized arrays in StorageBuffer the last 2 bits store the padding size |
| * added to the surface, so we can calculate latter the original buffer |
| * size to know the number of elements. |
| * |
| * surface_size = isl_align(buffer_size, 4) + |
| * (isl_align(buffer_size) - buffer_size) |
| * |
| * buffer_size = (surface_size & ~3) - (surface_size & 3) |
| */ |
| if (info->format == ISL_FORMAT_RAW || |
| info->stride_B < isl_format_get_layout(info->format)->bpb / 8) { |
| assert(info->stride_B == 1); |
| uint64_t aligned_size = isl_align(buffer_size, 4); |
| buffer_size = aligned_size + (aligned_size - buffer_size); |
| } |
| |
| uint32_t num_elements = buffer_size / info->stride_B; |
| |
| if (GEN_GEN >= 7) { |
| /* From the IVB PRM, SURFACE_STATE::Height, |
| * |
| * For typed buffer and structured buffer surfaces, the number |
| * of entries in the buffer ranges from 1 to 2^27. For raw buffer |
| * surfaces, the number of entries in the buffer is the number of bytes |
| * which can range from 1 to 2^30. |
| */ |
| if (info->format == ISL_FORMAT_RAW) { |
| assert(num_elements <= (1ull << 30)); |
| assert(num_elements > 0); |
| } else { |
| assert(num_elements <= (1ull << 27)); |
| } |
| } else { |
| assert(num_elements <= (1ull << 27)); |
| } |
| |
| struct GENX(RENDER_SURFACE_STATE) s = { 0, }; |
| |
| s.SurfaceType = SURFTYPE_BUFFER; |
| s.SurfaceFormat = info->format; |
| |
| #if GEN_GEN >= 6 |
| s.SurfaceVerticalAlignment = isl_to_gen_valign[4]; |
| #if GEN_GEN >= 7 |
| s.SurfaceHorizontalAlignment = isl_to_gen_halign[4]; |
| s.SurfaceArray = false; |
| #endif |
| #endif |
| |
| #if GEN_GEN >= 7 |
| s.Height = ((num_elements - 1) >> 7) & 0x3fff; |
| s.Width = (num_elements - 1) & 0x7f; |
| s.Depth = ((num_elements - 1) >> 21) & 0x3ff; |
| #else |
| s.Height = ((num_elements - 1) >> 7) & 0x1fff; |
| s.Width = (num_elements - 1) & 0x7f; |
| s.Depth = ((num_elements - 1) >> 20) & 0x7f; |
| #endif |
| |
| s.SurfacePitch = info->stride_B - 1; |
| |
| #if GEN_GEN >= 6 |
| s.NumberofMultisamples = MULTISAMPLECOUNT_1; |
| #endif |
| |
| #if (GEN_GEN >= 8) |
| s.TileMode = LINEAR; |
| #else |
| s.TiledSurface = false; |
| #endif |
| |
| #if (GEN_GEN >= 8) |
| s.RenderCacheReadWriteMode = WriteOnlyCache; |
| #else |
| s.RenderCacheReadWriteMode = 0; |
| #endif |
| |
| s.SurfaceBaseAddress = info->address; |
| #if GEN_GEN >= 6 |
| s.MOCS = info->mocs; |
| #endif |
| |
| #if (GEN_GEN >= 8 || GEN_IS_HASWELL) |
| s.ShaderChannelSelectRed = (enum GENX(ShaderChannelSelect)) info->swizzle.r; |
| s.ShaderChannelSelectGreen = (enum GENX(ShaderChannelSelect)) info->swizzle.g; |
| s.ShaderChannelSelectBlue = (enum GENX(ShaderChannelSelect)) info->swizzle.b; |
| s.ShaderChannelSelectAlpha = (enum GENX(ShaderChannelSelect)) info->swizzle.a; |
| #endif |
| |
| GENX(RENDER_SURFACE_STATE_pack)(NULL, state, &s); |
| } |
| |
| void |
| isl_genX(null_fill_state)(void *state, struct isl_extent3d size) |
| { |
| struct GENX(RENDER_SURFACE_STATE) s = { |
| .SurfaceType = SURFTYPE_NULL, |
| .SurfaceFormat = ISL_FORMAT_B8G8R8A8_UNORM, |
| #if GEN_GEN >= 7 |
| .SurfaceArray = size.depth > 0, |
| #endif |
| #if GEN_GEN >= 8 |
| .TileMode = YMAJOR, |
| #else |
| .TiledSurface = true, |
| .TileWalk = TILEWALK_YMAJOR, |
| #endif |
| .Width = size.width - 1, |
| .Height = size.height - 1, |
| .Depth = size.depth - 1, |
| .RenderTargetViewExtent = size.depth - 1, |
| #if GEN_GEN <= 5 |
| .ColorBufferComponentWriteDisables = 0xf, |
| #endif |
| }; |
| GENX(RENDER_SURFACE_STATE_pack)(NULL, state, &s); |
| } |