blob: 012da864f4f25741a132fb632d7d7fe028cd4091 [file] [log] [blame]
#!/bin/sh
################################################################################
## ##
## Copyright (c) International Business Machines Corp., 2006 ##
## ##
## This program is free software; you can redistribute it and#or modify ##
## it under the terms of the GNU General Public License as published by ##
## the Free Software Foundation; either version 2 of the License, or ##
## (at your option) any later version. ##
## ##
## This program is distributed in the hope that it will be useful, but ##
## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
## for more details. ##
## ##
## You should have received a copy of the GNU General Public License ##
## along with this program; if not, write to the Free Software ##
## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
## ##
## ##
################################################################################
#
# File:
# mcast6-pktfld02
#
# Description:
# Verify that the kernel is not crashed when joining plural IPv6 multicast
# groups on separate sockets, then receiving a large number of UDP packets at
# the each socket
#
# Setup:
# See ltp-yyyymmdd/testcases/network/stress/README
#
# Author:
# Mitsuru Chinen <mitch@jp.ibm.com>
#
# History:
# May 1 2006 - Created (Mitsuru Chinen)
#
#-----------------------------------------------------------------------
# Uncomment line below for debug output.
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
# The test case ID, the test case count and the total number of test case
TCID=mcast6-pktfld02
TST_TOTAL=1
TST_COUNT=1
export TCID
export TST_COUNT
export TST_TOTAL
LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
export LTPROOT
# Check the environmanet variable
. check_envval || exit $TST_TOTAL
# Dulation of the test [sec]
NS_DURATION=${NS_DURATION:-3600} # 1 hour
# The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}
# Network portion of the IPv6 address
NETWORK_PART="fec0:1:1:1"
# Host portion of the IPv6 address
LHOST_HOST_PART=":2" # local host
RHOST_HOST_PART=":1" # remote host
# Prefix of the multicast address
MCAST_ADDR_PREFIX=ff0e::1111
# Number of the multicast connection
MCASTNUM_NORMAL=${MCASTNUM_NORMAL:-20}
#-----------------------------------------------------------------------
#
# Function: do_cleanup
#
# Description:
# Recover the system configuration
#
#-----------------------------------------------------------------------
do_cleanup()
{
# Make sure to kill the multicast receiver and sender
killall -SIGHUP ns-mcast_receiver >/dev/null 2>&1
$LTP_RSH $RHOST killall -SIGHUP ns-udpsender >/dev/null 2>&1
# Clean up each interface
initialize_if lhost ${LINK_NUM}
initialize_if rhost ${LINK_NUM}
}
#-----------------------------------------------------------------------
#
# Function: do_setup
#
# Description:
# Configure the ssystem for the test
#
#-----------------------------------------------------------------------
do_setup()
{
# Initialize the system configuration
do_cleanup
# Call do_cleanup function before exit
trap do_cleanup 0
# Unset the maximum number of processes
ulimit -u unlimited
# name of interface of the local/remote host
lhost_ifname=`get_ifname lhost $LINK_NUM`
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to get the interface name at the local host"
exit $TST_TOTAL
fi
rhost_ifname=`get_ifname rhost $LINK_NUM`
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to get the interface name at the remote host"
exit $TST_TOTAL
fi
# Set IPv6 addresses to the interfaces
add_ipv6addr lhost $LINK_NUM $NETWORK_PART $LHOST_HOST_PART
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to add any IP address at the local host"
exit 1
fi
add_ipv6addr rhost $LINK_NUM $NETWORK_PART $RHOST_HOST_PART
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to add any IP address at the remote host"
exit 1
fi
# IPv6 address of the local/remote host
lhost_addr="${NETWORK_PART}:${LHOST_HOST_PART}"
rhost_addr="${NETWORK_PART}:${RHOST_HOST_PART}"
# Make sure the connectvity
check_icmpv6_connectivity $lhost_ifname $rhost_addr
if [ $? -ne 0 ]; then
tst_resm TBROK "There is no IPv6 connectivity."
exit 1
fi
# Make sure the sysctl values
sysctl -w net.ipv6.conf.all.force_mld_version=0 >/dev/null
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to set the sysctl value regarding multicast"
exit $TST_TOTAL
fi
sysctl -w net.ipv6.conf.${lhost_ifname}.force_mld_version=0 >/dev/null
sysctl -w net.ipv6.mld_max_msf=10 >/dev/null
}
#-----------------------------------------------------------------------
#
# Main
#
#
# Test description
tst_resm TINFO "Verify that the kernel is not crashed when joining $MCASTNUM_NORMAL IPv6 multicast groups on separate sockets, then receiving a large number of UDP packets at the each socket in $NS_DURATION [sec]"
# Make sure the value of LTPROOT
do_setup
mcastnum=0
mcast_port_range=`find_portbundle udp 1025 $MCASTNUM_NORMAL`
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to get enough port"
exit 1
fi
mcast_port_top=`echo $mcast_port_range | cut -f 1 -d '-'`
while [ $mcastnum -lt $MCASTNUM_NORMAL ]; do
# Define the multicast address
if [ $mcastnum -gt 65535 ]; then
tst_resm TINFO "The number of the connection is less than 65535"
break
fi
mcastnum_hex=`printf "%x" $mcastnum`
mcast_addr=${MCAST_ADDR_PREFIX}:${mcastnum_hex}
# Run a receiver
mcast_port=`expr $mcast_port_top + $mcastnum`
ns-mcast_receiver -f 6 -I $lhost_ifname -m $mcast_addr -p $mcast_port -b
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to start multicast receiver"
exit 1
fi
# Run a sender
$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-udpsender -D $mcast_addr -f 6 -p $mcast_port -m -I $rhost_ifname -b -t $NS_DURATION
mcastnum=`expr $mcastnum + 1`
done
sleep $NS_DURATION
do_cleanup
#-----------------------------------------------------------------------
#
# Clean up
#
tst_resm TPASS "Test is finished successfully."
exit 0