| //===- MipsInstrFPU.td - Mips FPU Instruction Information --*- tablegen -*-===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file describes the Mips FPU instruction set. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Instructions |
| // ------------------------ |
| // * 64bit fp: |
| // - 32 64-bit registers (default mode) |
| // - 16 even 32-bit registers (32-bit compatible mode) for |
| // single and double access. |
| // * 32bit fp: |
| // - 16 even 32-bit registers - single and double (aliased) |
| // - 32 32-bit registers (within single-only mode) |
| //===----------------------------------------------------------------------===// |
| |
| // Floating Point Compare and Branch |
| def SDT_MipsFPBrcond : SDTypeProfile<0, 2, [SDTCisInt<0>, |
| SDTCisVT<1, OtherVT>]>; |
| def SDT_MipsFPCmp : SDTypeProfile<0, 3, [SDTCisSameAs<0, 1>, SDTCisFP<1>, |
| SDTCisInt<2>]>; |
| def SDT_MipsCMovFP : SDTypeProfile<1, 2, [SDTCisSameAs<0, 1>, |
| SDTCisSameAs<1, 2>]>; |
| def SDT_MipsBuildPairF64 : SDTypeProfile<1, 2, [SDTCisVT<0, f64>, |
| SDTCisVT<1, i32>, |
| SDTCisSameAs<1, 2>]>; |
| def SDT_MipsExtractElementF64 : SDTypeProfile<1, 2, [SDTCisVT<0, i32>, |
| SDTCisVT<1, f64>, |
| SDTCisVT<0, i32>]>; |
| |
| def MipsFPCmp : SDNode<"MipsISD::FPCmp", SDT_MipsFPCmp, [SDNPOutGlue]>; |
| def MipsCMovFP_T : SDNode<"MipsISD::CMovFP_T", SDT_MipsCMovFP, [SDNPInGlue]>; |
| def MipsCMovFP_F : SDNode<"MipsISD::CMovFP_F", SDT_MipsCMovFP, [SDNPInGlue]>; |
| def MipsFPRound : SDNode<"MipsISD::FPRound", SDTFPRoundOp, [SDNPOptInGlue]>; |
| def MipsFPBrcond : SDNode<"MipsISD::FPBrcond", SDT_MipsFPBrcond, |
| [SDNPHasChain, SDNPOptInGlue]>; |
| def MipsBuildPairF64 : SDNode<"MipsISD::BuildPairF64", SDT_MipsBuildPairF64>; |
| def MipsExtractElementF64 : SDNode<"MipsISD::ExtractElementF64", |
| SDT_MipsExtractElementF64>; |
| |
| // Operand for printing out a condition code. |
| let PrintMethod = "printFCCOperand" in |
| def condcode : Operand<i32>; |
| |
| //===----------------------------------------------------------------------===// |
| // Feature predicates. |
| //===----------------------------------------------------------------------===// |
| |
| def In32BitMode : Predicate<"!Subtarget.isFP64bit()">; |
| def IsSingleFloat : Predicate<"Subtarget.isSingleFloat()">; |
| def IsNotSingleFloat : Predicate<"!Subtarget.isSingleFloat()">; |
| |
| //===----------------------------------------------------------------------===// |
| // Instruction Class Templates |
| // |
| // A set of multiclasses is used to address the register usage. |
| // |
| // S32 - single precision in 16 32bit even fp registers |
| // single precision in 32 32bit fp registers in SingleOnly mode |
| // S64 - single precision in 32 64bit fp registers (In64BitMode) |
| // D32 - double precision in 16 32bit even fp registers |
| // D64 - double precision in 32 64bit fp registers (In64BitMode) |
| // |
| // Only S32 and D32 are supported right now. |
| //===----------------------------------------------------------------------===// |
| |
| multiclass FFR1_1<bits<6> funct, string asmstr> |
| { |
| def _S32 : FFR<0x11, funct, 0x0, (outs FGR32:$fd), (ins FGR32:$fs), |
| !strconcat(asmstr, ".s\t$fd, $fs"), []>; |
| |
| def _D32 : FFR<0x11, funct, 0x1, (outs FGR32:$fd), (ins AFGR64:$fs), |
| !strconcat(asmstr, ".d\t$fd, $fs"), []>, Requires<[In32BitMode]>; |
| } |
| |
| multiclass FFR1_2<bits<6> funct, string asmstr, SDNode FOp> |
| { |
| def _S32 : FFR<0x11, funct, 0x0, (outs FGR32:$fd), (ins FGR32:$fs), |
| !strconcat(asmstr, ".s\t$fd, $fs"), |
| [(set FGR32:$fd, (FOp FGR32:$fs))]>; |
| |
| def _D32 : FFR<0x11, funct, 0x1, (outs AFGR64:$fd), (ins AFGR64:$fs), |
| !strconcat(asmstr, ".d\t$fd, $fs"), |
| [(set AFGR64:$fd, (FOp AFGR64:$fs))]>, Requires<[In32BitMode]>; |
| } |
| |
| class FFR1_3<bits<6> funct, bits<5> fmt, RegisterClass RcSrc, |
| RegisterClass RcDst, string asmstr>: |
| FFR<0x11, funct, fmt, (outs RcSrc:$fd), (ins RcDst:$fs), |
| !strconcat(asmstr, "\t$fd, $fs"), []>; |
| |
| |
| multiclass FFR1_4<bits<6> funct, string asmstr, SDNode FOp, bit isComm = 0> { |
| let isCommutable = isComm in { |
| def _S32 : FFR<0x11, funct, 0x0, (outs FGR32:$fd), |
| (ins FGR32:$fs, FGR32:$ft), |
| !strconcat(asmstr, ".s\t$fd, $fs, $ft"), |
| [(set FGR32:$fd, (FOp FGR32:$fs, FGR32:$ft))]>; |
| |
| def _D32 : FFR<0x11, funct, 0x1, (outs AFGR64:$fd), |
| (ins AFGR64:$fs, AFGR64:$ft), |
| !strconcat(asmstr, ".d\t$fd, $fs, $ft"), |
| [(set AFGR64:$fd, (FOp AFGR64:$fs, AFGR64:$ft))]>, |
| Requires<[In32BitMode]>; |
| } |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Instructions |
| //===----------------------------------------------------------------------===// |
| |
| let ft = 0 in { |
| defm FLOOR_W : FFR1_1<0b001111, "floor.w">; |
| defm CEIL_W : FFR1_1<0b001110, "ceil.w">; |
| defm ROUND_W : FFR1_1<0b001100, "round.w">; |
| defm TRUNC_W : FFR1_1<0b001101, "trunc.w">; |
| defm CVTW : FFR1_1<0b100100, "cvt.w">; |
| |
| defm FABS : FFR1_2<0b000101, "abs", fabs>; |
| defm FNEG : FFR1_2<0b000111, "neg", fneg>; |
| defm FSQRT : FFR1_2<0b000100, "sqrt", fsqrt>; |
| |
| /// Convert to Single Precison |
| def CVTS_W32 : FFR1_3<0b100000, 0x2, FGR32, FGR32, "cvt.s.w">; |
| |
| let Predicates = [IsNotSingleFloat] in { |
| /// Ceil to long signed integer |
| def CEIL_LS : FFR1_3<0b001010, 0x0, FGR32, FGR32, "ceil.l">; |
| def CEIL_LD : FFR1_3<0b001010, 0x1, AFGR64, AFGR64, "ceil.l">; |
| |
| /// Round to long signed integer |
| def ROUND_LS : FFR1_3<0b001000, 0x0, FGR32, FGR32, "round.l">; |
| def ROUND_LD : FFR1_3<0b001000, 0x1, AFGR64, AFGR64, "round.l">; |
| |
| /// Floor to long signed integer |
| def FLOOR_LS : FFR1_3<0b001011, 0x0, FGR32, FGR32, "floor.l">; |
| def FLOOR_LD : FFR1_3<0b001011, 0x1, AFGR64, AFGR64, "floor.l">; |
| |
| /// Trunc to long signed integer |
| def TRUNC_LS : FFR1_3<0b001001, 0x0, FGR32, FGR32, "trunc.l">; |
| def TRUNC_LD : FFR1_3<0b001001, 0x1, AFGR64, AFGR64, "trunc.l">; |
| |
| /// Convert to long signed integer |
| def CVTL_S : FFR1_3<0b100101, 0x0, FGR32, FGR32, "cvt.l">; |
| def CVTL_D : FFR1_3<0b100101, 0x1, AFGR64, AFGR64, "cvt.l">; |
| |
| /// Convert to Double Precison |
| def CVTD_S32 : FFR1_3<0b100001, 0x0, AFGR64, FGR32, "cvt.d.s">; |
| def CVTD_W32 : FFR1_3<0b100001, 0x2, AFGR64, FGR32, "cvt.d.w">; |
| def CVTD_L32 : FFR1_3<0b100001, 0x3, AFGR64, AFGR64, "cvt.d.l">; |
| |
| /// Convert to Single Precison |
| def CVTS_D32 : FFR1_3<0b100000, 0x1, FGR32, AFGR64, "cvt.s.d">; |
| def CVTS_L32 : FFR1_3<0b100000, 0x3, FGR32, AFGR64, "cvt.s.l">; |
| } |
| } |
| |
| // The odd-numbered registers are only referenced when doing loads, |
| // stores, and moves between floating-point and integer registers. |
| // When defining instructions, we reference all 32-bit registers, |
| // regardless of register aliasing. |
| let fd = 0 in { |
| /// Move Control Registers From/To CPU Registers |
| def CFC1 : FFR<0x11, 0x0, 0x2, (outs CPURegs:$rt), (ins CCR:$fs), |
| "cfc1\t$rt, $fs", []>; |
| |
| def CTC1 : FFR<0x11, 0x0, 0x6, (outs CCR:$rt), (ins CPURegs:$fs), |
| "ctc1\t$fs, $rt", []>; |
| |
| def MFC1 : FFR<0x11, 0x00, 0x00, (outs CPURegs:$rt), (ins FGR32:$fs), |
| "mfc1\t$rt, $fs", []>; |
| |
| def MTC1 : FFR<0x11, 0x00, 0x04, (outs FGR32:$fs), (ins CPURegs:$rt), |
| "mtc1\t$rt, $fs", []>; |
| } |
| |
| def FMOV_S32 : FFR<0x11, 0b000110, 0x0, (outs FGR32:$fd), (ins FGR32:$fs), |
| "mov.s\t$fd, $fs", []>; |
| def FMOV_D32 : FFR<0x11, 0b000110, 0x1, (outs AFGR64:$fd), (ins AFGR64:$fs), |
| "mov.d\t$fd, $fs", []>; |
| |
| /// Floating Point Memory Instructions |
| let Predicates = [IsNotSingleFloat] in { |
| def LDC1 : FFI<0b110101, (outs AFGR64:$ft), (ins mem:$addr), |
| "ldc1\t$ft, $addr", [(set AFGR64:$ft, (load addr:$addr))]>; |
| |
| def SDC1 : FFI<0b111101, (outs), (ins AFGR64:$ft, mem:$addr), |
| "sdc1\t$ft, $addr", [(store AFGR64:$ft, addr:$addr)]>; |
| } |
| |
| // LWC1 and SWC1 can always be emitted with odd registers. |
| def LWC1 : FFI<0b110001, (outs FGR32:$ft), (ins mem:$addr), "lwc1\t$ft, $addr", |
| [(set FGR32:$ft, (load addr:$addr))]>; |
| def SWC1 : FFI<0b111001, (outs), (ins FGR32:$ft, mem:$addr), |
| "swc1\t$ft, $addr", [(store FGR32:$ft, addr:$addr)]>; |
| |
| /// Floating-point Aritmetic |
| defm FADD : FFR1_4<0x10, "add", fadd, 1>; |
| defm FDIV : FFR1_4<0x03, "div", fdiv>; |
| defm FMUL : FFR1_4<0x02, "mul", fmul, 1>; |
| defm FSUB : FFR1_4<0x01, "sub", fsub>; |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Branch Codes |
| //===----------------------------------------------------------------------===// |
| // Mips branch codes. These correspond to condcode in MipsInstrInfo.h. |
| // They must be kept in synch. |
| def MIPS_BRANCH_F : PatLeaf<(i32 0)>; |
| def MIPS_BRANCH_T : PatLeaf<(i32 1)>; |
| def MIPS_BRANCH_FL : PatLeaf<(i32 2)>; |
| def MIPS_BRANCH_TL : PatLeaf<(i32 3)>; |
| |
| /// Floating Point Branch of False/True (Likely) |
| let isBranch=1, isTerminator=1, hasDelaySlot=1, base=0x8, Uses=[FCR31] in |
| class FBRANCH<PatLeaf op, string asmstr> : FFI<0x11, (outs), |
| (ins brtarget:$dst), !strconcat(asmstr, "\t$dst"), |
| [(MipsFPBrcond op, bb:$dst)]>; |
| |
| def BC1F : FBRANCH<MIPS_BRANCH_F, "bc1f">; |
| def BC1T : FBRANCH<MIPS_BRANCH_T, "bc1t">; |
| def BC1FL : FBRANCH<MIPS_BRANCH_FL, "bc1fl">; |
| def BC1TL : FBRANCH<MIPS_BRANCH_TL, "bc1tl">; |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Flag Conditions |
| //===----------------------------------------------------------------------===// |
| // Mips condition codes. They must correspond to condcode in MipsInstrInfo.h. |
| // They must be kept in synch. |
| def MIPS_FCOND_F : PatLeaf<(i32 0)>; |
| def MIPS_FCOND_UN : PatLeaf<(i32 1)>; |
| def MIPS_FCOND_OEQ : PatLeaf<(i32 2)>; |
| def MIPS_FCOND_UEQ : PatLeaf<(i32 3)>; |
| def MIPS_FCOND_OLT : PatLeaf<(i32 4)>; |
| def MIPS_FCOND_ULT : PatLeaf<(i32 5)>; |
| def MIPS_FCOND_OLE : PatLeaf<(i32 6)>; |
| def MIPS_FCOND_ULE : PatLeaf<(i32 7)>; |
| def MIPS_FCOND_SF : PatLeaf<(i32 8)>; |
| def MIPS_FCOND_NGLE : PatLeaf<(i32 9)>; |
| def MIPS_FCOND_SEQ : PatLeaf<(i32 10)>; |
| def MIPS_FCOND_NGL : PatLeaf<(i32 11)>; |
| def MIPS_FCOND_LT : PatLeaf<(i32 12)>; |
| def MIPS_FCOND_NGE : PatLeaf<(i32 13)>; |
| def MIPS_FCOND_LE : PatLeaf<(i32 14)>; |
| def MIPS_FCOND_NGT : PatLeaf<(i32 15)>; |
| |
| /// Floating Point Compare |
| let Defs=[FCR31] in { |
| def FCMP_S32 : FCC<0x0, (outs), (ins FGR32:$fs, FGR32:$ft, condcode:$cc), |
| "c.$cc.s\t$fs, $ft", |
| [(MipsFPCmp FGR32:$fs, FGR32:$ft, imm:$cc)]>; |
| |
| def FCMP_D32 : FCC<0x1, (outs), (ins AFGR64:$fs, AFGR64:$ft, condcode:$cc), |
| "c.$cc.d\t$fs, $ft", |
| [(MipsFPCmp AFGR64:$fs, AFGR64:$ft, imm:$cc)]>, |
| Requires<[In32BitMode]>; |
| } |
| |
| |
| // Conditional moves: |
| // These instructions are expanded in |
| // MipsISelLowering::EmitInstrWithCustomInserter if target does not have |
| // conditional move instructions. |
| // flag:int, data:float |
| let usesCustomInserter = 1, Constraints = "$F = $dst" in |
| class CondMovIntFP<RegisterClass RC, bits<5> fmt, bits<6> func, |
| string instr_asm> : |
| FFR<0x11, func, fmt, (outs RC:$dst), (ins RC:$T, CPURegs:$cond, RC:$F), |
| !strconcat(instr_asm, "\t$dst, $T, $cond"), []>; |
| |
| def MOVZ_S : CondMovIntFP<FGR32, 16, 18, "movz.s">; |
| def MOVN_S : CondMovIntFP<FGR32, 16, 19, "movn.s">; |
| |
| let Predicates = [In32BitMode] in { |
| def MOVZ_D : CondMovIntFP<AFGR64, 17, 18, "movz.d">; |
| def MOVN_D : CondMovIntFP<AFGR64, 17, 19, "movn.d">; |
| } |
| |
| defm : MovzPats<FGR32, MOVZ_S>; |
| defm : MovnPats<FGR32, MOVN_S>; |
| |
| let Predicates = [In32BitMode] in { |
| defm : MovzPats<AFGR64, MOVZ_D>; |
| defm : MovnPats<AFGR64, MOVN_D>; |
| } |
| |
| let usesCustomInserter = 1, Uses = [FCR31], Constraints = "$F = $dst" in { |
| // flag:float, data:int |
| class CondMovFPInt<SDNode cmov, bits<1> tf, string instr_asm> : |
| FCMOV<tf, (outs CPURegs:$dst), (ins CPURegs:$T, CPURegs:$F), |
| !strconcat(instr_asm, "\t$dst, $T, $$fcc0"), |
| [(set CPURegs:$dst, (cmov CPURegs:$T, CPURegs:$F))]>; |
| |
| // flag:float, data:float |
| class CondMovFPFP<RegisterClass RC, SDNode cmov, bits<5> fmt, bits<1> tf, |
| string instr_asm> : |
| FFCMOV<fmt, tf, (outs RC:$dst), (ins RC:$T, RC:$F), |
| !strconcat(instr_asm, "\t$dst, $T, $$fcc0"), |
| [(set RC:$dst, (cmov RC:$T, RC:$F))]>; |
| } |
| |
| def MOVT : CondMovFPInt<MipsCMovFP_T, 1, "movt">; |
| def MOVF : CondMovFPInt<MipsCMovFP_F, 0, "movf">; |
| def MOVT_S : CondMovFPFP<FGR32, MipsCMovFP_T, 16, 1, "movt.s">; |
| def MOVF_S : CondMovFPFP<FGR32, MipsCMovFP_F, 16, 0, "movf.s">; |
| |
| let Predicates = [In32BitMode] in { |
| def MOVT_D : CondMovFPFP<AFGR64, MipsCMovFP_T, 17, 1, "movt.d">; |
| def MOVF_D : CondMovFPFP<AFGR64, MipsCMovFP_F, 17, 0, "movf.d">; |
| } |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Pseudo-Instructions |
| //===----------------------------------------------------------------------===// |
| def MOVCCRToCCR : MipsPseudo<(outs CCR:$dst), (ins CCR:$src), |
| "# MOVCCRToCCR", []>; |
| |
| // This pseudo instr gets expanded into 2 mtc1 instrs after register |
| // allocation. |
| def BuildPairF64 : |
| MipsPseudo<(outs AFGR64:$dst), |
| (ins CPURegs:$lo, CPURegs:$hi), "", |
| [(set AFGR64:$dst, (MipsBuildPairF64 CPURegs:$lo, CPURegs:$hi))]>; |
| |
| // This pseudo instr gets expanded into 2 mfc1 instrs after register |
| // allocation. |
| // if n is 0, lower part of src is extracted. |
| // if n is 1, higher part of src is extracted. |
| def ExtractElementF64 : |
| MipsPseudo<(outs CPURegs:$dst), |
| (ins AFGR64:$src, i32imm:$n), "", |
| [(set CPURegs:$dst, |
| (MipsExtractElementF64 AFGR64:$src, imm:$n))]>; |
| |
| //===----------------------------------------------------------------------===// |
| // Floating Point Patterns |
| //===----------------------------------------------------------------------===// |
| def fpimm0 : PatLeaf<(fpimm), [{ |
| return N->isExactlyValue(+0.0); |
| }]>; |
| |
| def fpimm0neg : PatLeaf<(fpimm), [{ |
| return N->isExactlyValue(-0.0); |
| }]>; |
| |
| def : Pat<(f32 fpimm0), (MTC1 ZERO)>; |
| def : Pat<(f32 fpimm0neg), (FNEG_S32 (MTC1 ZERO))>; |
| |
| def : Pat<(f32 (sint_to_fp CPURegs:$src)), (CVTS_W32 (MTC1 CPURegs:$src))>; |
| def : Pat<(f64 (sint_to_fp CPURegs:$src)), (CVTD_W32 (MTC1 CPURegs:$src))>; |
| |
| def : Pat<(i32 (fp_to_sint FGR32:$src)), (MFC1 (TRUNC_W_S32 FGR32:$src))>; |
| def : Pat<(i32 (fp_to_sint AFGR64:$src)), (MFC1 (TRUNC_W_D32 AFGR64:$src))>; |
| |
| def : Pat<(i32 (bitconvert FGR32:$src)), (MFC1 FGR32:$src)>; |
| def : Pat<(f32 (bitconvert CPURegs:$src)), (MTC1 CPURegs:$src)>; |
| |
| let Predicates = [In32BitMode] in { |
| def : Pat<(f32 (fround AFGR64:$src)), (CVTS_D32 AFGR64:$src)>; |
| def : Pat<(f64 (fextend FGR32:$src)), (CVTD_S32 FGR32:$src)>; |
| } |
| |
| // MipsFPRound is only emitted for MipsI targets. |
| def : Pat<(f32 (MipsFPRound AFGR64:$src)), (CVTW_D32 AFGR64:$src)>; |
| |
