media: atmel-isc: Add support for BT656 with CRC decoding
The ISC driver currently supports ITU-R 601 encoding which
utilizes the external hsync and vsync signals. ITU-R 656
format removes the need for these pins by embedding the
sync pulses within the data packet.
To support this feature, enable necessary register bits
when this feature is enabled via device tree.
Signed-off-by: Ken Sloat <ksloat@aampglobal.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 2aadc19..d730693 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -24,6 +24,8 @@
#define ISC_PFE_CFG0_HPOL_LOW BIT(0)
#define ISC_PFE_CFG0_VPOL_LOW BIT(1)
#define ISC_PFE_CFG0_PPOL_LOW BIT(2)
+#define ISC_PFE_CFG0_CCIR656 BIT(9)
+#define ISC_PFE_CFG0_CCIR_CRC BIT(10)
#define ISC_PFE_CFG0_MODE_PROGRESSIVE (0x0 << 4)
#define ISC_PFE_CFG0_MODE_MASK GENMASK(6, 4)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 5017896..9a399aa 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -1095,7 +1095,8 @@
pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW |
ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW |
- ISC_PFE_CFG0_MODE_MASK;
+ ISC_PFE_CFG0_MODE_MASK | ISC_PFE_CFG0_CCIR_CRC |
+ ISC_PFE_CFG0_CCIR656;
regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
@@ -2084,6 +2085,10 @@
if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW;
+ if (v4l2_epn.bus_type == V4L2_MBUS_BT656)
+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_CCIR_CRC |
+ ISC_PFE_CFG0_CCIR656;
+
subdev_entity->asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
subdev_entity->asd->match.fwnode =
of_fwnode_handle(rem);
