regulator: act8865: Add support for act8600 charger
This provides a way to monitor battery charge status via the power
supply subsystem.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20190723011418.29143-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index cf72d7c6..e63285d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -16,6 +16,7 @@
#include <linux/regulator/act8865.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/power_supply.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
@@ -118,6 +119,11 @@
#define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
#define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
+#define ACT8600_APCH_CHG_ACIN BIT(7)
+#define ACT8600_APCH_CHG_USB BIT(6)
+#define ACT8600_APCH_CSTATE0 BIT(5)
+#define ACT8600_APCH_CSTATE1 BIT(4)
+
/*
* ACT8865 voltage number
*/
@@ -372,6 +378,75 @@
while (1);
}
+static int act8600_charger_get_status(struct regmap *map)
+{
+ unsigned int val;
+ int ret;
+ u8 state0, state1;
+
+ ret = regmap_read(map, ACT8600_APCH_STAT, &val);
+ if (ret < 0)
+ return ret;
+
+ state0 = val & ACT8600_APCH_CSTATE0;
+ state1 = val & ACT8600_APCH_CSTATE1;
+
+ if (state0 && !state1)
+ return POWER_SUPPLY_STATUS_CHARGING;
+ if (!state0 && state1)
+ return POWER_SUPPLY_STATUS_NOT_CHARGING;
+ if (!state0 && !state1)
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return POWER_SUPPLY_STATUS_UNKNOWN;
+}
+
+static int act8600_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct regmap *map = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = act8600_charger_get_status(map);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property act8600_charger_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+};
+
+static const struct power_supply_desc act8600_charger_desc = {
+ .name = "act8600-charger",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = act8600_charger_properties,
+ .num_properties = ARRAY_SIZE(act8600_charger_properties),
+ .get_property = act8600_charger_get_property,
+};
+
+static int act8600_charger_probe(struct device *dev, struct regmap *regmap)
+{
+ struct power_supply *charger;
+ struct power_supply_config cfg = {
+ .drv_data = regmap,
+ .of_node = dev->of_node,
+ };
+
+ charger = devm_power_supply_register(dev, &act8600_charger_desc, &cfg);
+
+ return IS_ERR(charger) ? PTR_ERR(charger) : 0;
+}
+
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
@@ -483,6 +558,15 @@
}
}
+ if (type == ACT8600) {
+ ret = act8600_charger_probe(dev, act8865->regmap);
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to probe charger");
+ return ret;
+ }
+ }
+
i2c_set_clientdata(client, act8865);
return 0;
