| What: /sys/kernel/debug/wilco_ec/raw |
| Date: January 2019 |
| KernelVersion: 5.1 |
| Description: |
| Write and read raw mailbox commands to the EC. |
| |
| You can write a hexadecimal sentence to raw, and that series of |
| bytes will be sent to the EC. Then, you can read the bytes of |
| response by reading from raw. |
| |
| For writing, bytes 0-1 indicate the message type, one of enum |
| wilco_ec_msg_type. Byte 2+ consist of the data passed in the |
| request, starting at MBOX[0] |
| |
| At least three bytes are required for writing, two for the type |
| and at least a single byte of data. Only the first |
| EC_MAILBOX_DATA_SIZE bytes of MBOX will be used. |
| |
| Example: |
| // Request EC info type 3 (EC firmware build date) |
| // Corresponds with sending type 0x00f0 with |
| // MBOX = [38, 00, 03, 00] |
| $ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw |
| // View the result. The decoded ASCII result "12/21/18" is |
| // included after the raw hex. |
| // Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...] |
| $ cat /sys/kernel/debug/wilco_ec/raw |
| 00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00 ..12/21/18.8... |
| |
| Note that the first 32 bytes of the received MBOX[] will be |
| printed, even if some of the data is junk. It is up to you to |
| know how many of the first bytes of data are the actual |
| response. |
