| /** | |
| * xzlib.c: front end for the transparent suport of lzma compression | |
| * at the I/O layer, based on an example file from lzma project | |
| * | |
| * See Copyright for the status of this software. | |
| * | |
| * Anders F Bjorklund <afb@users.sourceforge.net> | |
| */ | |
| #define IN_LIBXML | |
| #include "libxml.h" | |
| #ifdef LIBXML_LZMA_ENABLED | |
| #include <string.h> | |
| #ifdef HAVE_ERRNO_H | |
| #include <errno.h> | |
| #endif | |
| #ifdef HAVE_SYS_TYPES_H | |
| #include <sys/types.h> | |
| #endif | |
| #ifdef HAVE_SYS_STAT_H | |
| #include <sys/stat.h> | |
| #endif | |
| #ifdef HAVE_FCNTL_H | |
| #include <fcntl.h> | |
| #endif | |
| #ifdef HAVE_UNISTD_H | |
| #include <unistd.h> | |
| #endif | |
| #ifdef HAVE_STDLIB_H | |
| #include <stdlib.h> | |
| #endif | |
| #ifdef HAVE_ZLIB_H | |
| #include <zlib.h> | |
| #endif | |
| #ifdef HAVE_LZMA_H | |
| #include <lzma.h> | |
| #endif | |
| #include "xzlib.h" | |
| #include <libxml/xmlmemory.h> | |
| /* values for xz_state how */ | |
| #define LOOK 0 /* look for a gzip/lzma header */ | |
| #define COPY 1 /* copy input directly */ | |
| #define GZIP 2 /* decompress a gzip stream */ | |
| #define LZMA 3 /* decompress a lzma stream */ | |
| /* internal lzma file state data structure */ | |
| typedef struct { | |
| int mode; /* see lzma modes above */ | |
| int fd; /* file descriptor */ | |
| char *path; /* path or fd for error messages */ | |
| uint64_t pos; /* current position in uncompressed data */ | |
| unsigned int size; /* buffer size, zero if not allocated yet */ | |
| unsigned int want; /* requested buffer size, default is BUFSIZ */ | |
| unsigned char *in; /* input buffer */ | |
| unsigned char *out; /* output buffer (double-sized when reading) */ | |
| unsigned char *next; /* next output data to deliver or write */ | |
| unsigned int have; /* amount of output data unused at next */ | |
| int eof; /* true if end of input file reached */ | |
| uint64_t start; /* where the lzma data started, for rewinding */ | |
| uint64_t raw; /* where the raw data started, for seeking */ | |
| int how; /* 0: get header, 1: copy, 2: decompress */ | |
| int direct; /* true if last read direct, false if lzma */ | |
| /* seek request */ | |
| uint64_t skip; /* amount to skip (already rewound if backwards) */ | |
| int seek; /* true if seek request pending */ | |
| /* error information */ | |
| int err; /* error code */ | |
| char *msg; /* error message */ | |
| /* lzma stream */ | |
| int init; /* is the iniflate stream initialized */ | |
| lzma_stream strm; /* stream structure in-place (not a pointer) */ | |
| char padding1[32]; /* padding allowing to cope with possible | |
| extensions of above structure without | |
| too much side effect */ | |
| #ifdef HAVE_ZLIB_H | |
| /* zlib inflate or deflate stream */ | |
| z_stream zstrm; /* stream structure in-place (not a pointer) */ | |
| #endif | |
| char padding2[32]; /* padding allowing to cope with possible | |
| extensions of above structure without | |
| too much side effect */ | |
| } xz_state, *xz_statep; | |
| static void | |
| xz_error(xz_statep state, int err, const char *msg) | |
| { | |
| /* free previously allocated message and clear */ | |
| if (state->msg != NULL) { | |
| if (state->err != LZMA_MEM_ERROR) | |
| xmlFree(state->msg); | |
| state->msg = NULL; | |
| } | |
| /* set error code, and if no message, then done */ | |
| state->err = err; | |
| if (msg == NULL) | |
| return; | |
| /* for an out of memory error, save as static string */ | |
| if (err == LZMA_MEM_ERROR) { | |
| state->msg = (char *) msg; | |
| return; | |
| } | |
| /* construct error message with path */ | |
| if ((state->msg = | |
| xmlMalloc(strlen(state->path) + strlen(msg) + 3)) == NULL) { | |
| state->err = LZMA_MEM_ERROR; | |
| state->msg = (char *) "out of memory"; | |
| return; | |
| } | |
| strcpy(state->msg, state->path); | |
| strcat(state->msg, ": "); | |
| strcat(state->msg, msg); | |
| return; | |
| } | |
| static void | |
| xz_reset(xz_statep state) | |
| { | |
| state->have = 0; /* no output data available */ | |
| state->eof = 0; /* not at end of file */ | |
| state->how = LOOK; /* look for gzip header */ | |
| state->direct = 1; /* default for empty file */ | |
| state->seek = 0; /* no seek request pending */ | |
| xz_error(state, LZMA_OK, NULL); /* clear error */ | |
| state->pos = 0; /* no uncompressed data yet */ | |
| state->strm.avail_in = 0; /* no input data yet */ | |
| #ifdef HAVE_ZLIB_H | |
| state->zstrm.avail_in = 0; /* no input data yet */ | |
| #endif | |
| } | |
| static xzFile | |
| xz_open(const char *path, int fd, const char *mode ATTRIBUTE_UNUSED) | |
| { | |
| xz_statep state; | |
| /* allocate xzFile structure to return */ | |
| state = xmlMalloc(sizeof(xz_state)); | |
| if (state == NULL) | |
| return NULL; | |
| state->size = 0; /* no buffers allocated yet */ | |
| state->want = BUFSIZ; /* requested buffer size */ | |
| state->msg = NULL; /* no error message yet */ | |
| state->init = 0; /* initialization of zlib data */ | |
| /* save the path name for error messages */ | |
| state->path = xmlMalloc(strlen(path) + 1); | |
| if (state->path == NULL) { | |
| xmlFree(state); | |
| return NULL; | |
| } | |
| strcpy(state->path, path); | |
| /* open the file with the appropriate mode (or just use fd) */ | |
| state->fd = fd != -1 ? fd : open(path, | |
| #ifdef O_LARGEFILE | |
| O_LARGEFILE | | |
| #endif | |
| #ifdef O_BINARY | |
| O_BINARY | | |
| #endif | |
| O_RDONLY, 0666); | |
| if (state->fd == -1) { | |
| xmlFree(state->path); | |
| xmlFree(state); | |
| return NULL; | |
| } | |
| /* save the current position for rewinding (only if reading) */ | |
| state->start = lseek(state->fd, 0, SEEK_CUR); | |
| if (state->start == (uint64_t) - 1) | |
| state->start = 0; | |
| /* initialize stream */ | |
| xz_reset(state); | |
| /* return stream */ | |
| return (xzFile) state; | |
| } | |
| static int | |
| xz_compressed(xzFile f) { | |
| xz_statep state; | |
| if (f == NULL) | |
| return(-1); | |
| state = (xz_statep) f; | |
| if (state->init <= 0) | |
| return(-1); | |
| switch (state->how) { | |
| case COPY: | |
| return(0); | |
| case GZIP: | |
| case LZMA: | |
| return(1); | |
| } | |
| return(-1); | |
| } | |
| xzFile | |
| __libxml2_xzopen(const char *path, const char *mode) | |
| { | |
| return xz_open(path, -1, mode); | |
| } | |
| int | |
| __libxml2_xzcompressed(xzFile f) { | |
| return xz_compressed(f); | |
| } | |
| xzFile | |
| __libxml2_xzdopen(int fd, const char *mode) | |
| { | |
| char *path; /* identifier for error messages */ | |
| xzFile xz; | |
| if (fd == -1 || (path = xmlMalloc(7 + 3 * sizeof(int))) == NULL) | |
| return NULL; | |
| sprintf(path, "<fd:%d>", fd); /* for debugging */ | |
| xz = xz_open(path, fd, mode); | |
| xmlFree(path); | |
| return xz; | |
| } | |
| static int | |
| xz_load(xz_statep state, unsigned char *buf, unsigned int len, | |
| unsigned int *have) | |
| { | |
| int ret; | |
| *have = 0; | |
| do { | |
| ret = read(state->fd, buf + *have, len - *have); | |
| if (ret <= 0) | |
| break; | |
| *have += ret; | |
| } while (*have < len); | |
| if (ret < 0) { | |
| xz_error(state, -1, strerror(errno)); | |
| return -1; | |
| } | |
| if (ret == 0) | |
| state->eof = 1; | |
| return 0; | |
| } | |
| static int | |
| xz_avail(xz_statep state) | |
| { | |
| lzma_stream *strm = &(state->strm); | |
| if (state->err != LZMA_OK) | |
| return -1; | |
| if (state->eof == 0) { | |
| /* avail_in is size_t, which is not necessary sizeof(unsigned) */ | |
| unsigned tmp = strm->avail_in; | |
| if (xz_load(state, state->in, state->size, &tmp) == -1) { | |
| strm->avail_in = tmp; | |
| return -1; | |
| } | |
| strm->avail_in = tmp; | |
| strm->next_in = state->in; | |
| } | |
| return 0; | |
| } | |
| #ifdef HAVE_ZLIB_H | |
| static int | |
| xz_avail_zstrm(xz_statep state) | |
| { | |
| int ret; | |
| state->strm.avail_in = state->zstrm.avail_in; | |
| state->strm.next_in = state->zstrm.next_in; | |
| ret = xz_avail(state); | |
| state->zstrm.avail_in = (uInt) state->strm.avail_in; | |
| state->zstrm.next_in = (Bytef *) state->strm.next_in; | |
| return ret; | |
| } | |
| #endif | |
| static int | |
| is_format_xz(xz_statep state) | |
| { | |
| lzma_stream *strm = &(state->strm); | |
| return strm->avail_in >= 6 && memcmp(state->in, "\3757zXZ", 6) == 0; | |
| } | |
| static int | |
| is_format_lzma(xz_statep state) | |
| { | |
| lzma_stream *strm = &(state->strm); | |
| lzma_filter filter; | |
| lzma_options_lzma *opt; | |
| uint32_t dict_size; | |
| uint64_t uncompressed_size; | |
| size_t i; | |
| if (strm->avail_in < 13) | |
| return 0; | |
| filter.id = LZMA_FILTER_LZMA1; | |
| if (lzma_properties_decode(&filter, NULL, state->in, 5) != LZMA_OK) | |
| return 0; | |
| opt = filter.options; | |
| dict_size = opt->dict_size; | |
| free(opt); /* we can't use xmlFree on a string returned by zlib */ | |
| /* A hack to ditch tons of false positives: We allow only dictionary | |
| * sizes that are 2^n or 2^n + 2^(n-1) or UINT32_MAX. LZMA_Alone | |
| * created only files with 2^n, but accepts any dictionary size. | |
| * If someone complains, this will be reconsidered. | |
| */ | |
| if (dict_size != UINT32_MAX) { | |
| uint32_t d = dict_size - 1; | |
| d |= d >> 2; | |
| d |= d >> 3; | |
| d |= d >> 4; | |
| d |= d >> 8; | |
| d |= d >> 16; | |
| ++d; | |
| if (d != dict_size || dict_size == 0) | |
| return 0; | |
| } | |
| /* Another hack to ditch false positives: Assume that if the | |
| * uncompressed size is known, it must be less than 256 GiB. | |
| * Again, if someone complains, this will be reconsidered. | |
| */ | |
| uncompressed_size = 0; | |
| for (i = 0; i < 8; ++i) | |
| uncompressed_size |= (uint64_t) (state->in[5 + i]) << (i * 8); | |
| if (uncompressed_size != UINT64_MAX | |
| && uncompressed_size > (UINT64_C(1) << 38)) | |
| return 0; | |
| return 1; | |
| } | |
| #ifdef HAVE_ZLIB_H | |
| /* Get next byte from input, or -1 if end or error. */ | |
| #define NEXT() ((strm->avail_in == 0 && xz_avail(state) == -1) ? -1 : \ | |
| (strm->avail_in == 0 ? -1 : \ | |
| (strm->avail_in--, *(strm->next_in)++))) | |
| /* Same thing, but from zstrm */ | |
| #define NEXTZ() ((strm->avail_in == 0 && xz_avail_zstrm(state) == -1) ? -1 : \ | |
| (strm->avail_in == 0 ? -1 : \ | |
| (strm->avail_in--, *(strm->next_in)++))) | |
| /* Get a four-byte little-endian integer and return 0 on success and the value | |
| in *ret. Otherwise -1 is returned and *ret is not modified. */ | |
| static int | |
| gz_next4(xz_statep state, unsigned long *ret) | |
| { | |
| int ch; | |
| unsigned long val; | |
| z_streamp strm = &(state->zstrm); | |
| val = NEXTZ(); | |
| val += (unsigned) NEXTZ() << 8; | |
| val += (unsigned long) NEXTZ() << 16; | |
| ch = NEXTZ(); | |
| if (ch == -1) | |
| return -1; | |
| val += (unsigned long) ch << 24; | |
| *ret = val; | |
| return 0; | |
| } | |
| #endif | |
| static int | |
| xz_head(xz_statep state) | |
| { | |
| lzma_stream *strm = &(state->strm); | |
| lzma_stream init = LZMA_STREAM_INIT; | |
| int flags; | |
| unsigned len; | |
| /* allocate read buffers and inflate memory */ | |
| if (state->size == 0) { | |
| /* allocate buffers */ | |
| state->in = xmlMalloc(state->want); | |
| state->out = xmlMalloc(state->want << 1); | |
| if (state->in == NULL || state->out == NULL) { | |
| if (state->out != NULL) | |
| xmlFree(state->out); | |
| if (state->in != NULL) | |
| xmlFree(state->in); | |
| xz_error(state, LZMA_MEM_ERROR, "out of memory"); | |
| return -1; | |
| } | |
| state->size = state->want; | |
| /* allocate decoder memory */ | |
| state->strm = init; | |
| state->strm.avail_in = 0; | |
| state->strm.next_in = NULL; | |
| if (lzma_auto_decoder(&state->strm, UINT64_MAX, 0) != LZMA_OK) { | |
| xmlFree(state->out); | |
| xmlFree(state->in); | |
| state->size = 0; | |
| xz_error(state, LZMA_MEM_ERROR, "out of memory"); | |
| return -1; | |
| } | |
| #ifdef HAVE_ZLIB_H | |
| /* allocate inflate memory */ | |
| state->zstrm.zalloc = Z_NULL; | |
| state->zstrm.zfree = Z_NULL; | |
| state->zstrm.opaque = Z_NULL; | |
| state->zstrm.avail_in = 0; | |
| state->zstrm.next_in = Z_NULL; | |
| if (state->init == 0) { | |
| if (inflateInit2(&(state->zstrm), -15) != Z_OK) {/* raw inflate */ | |
| xmlFree(state->out); | |
| xmlFree(state->in); | |
| state->size = 0; | |
| xz_error(state, LZMA_MEM_ERROR, "out of memory"); | |
| return -1; | |
| } | |
| state->init = 1; | |
| } | |
| #endif | |
| } | |
| /* get some data in the input buffer */ | |
| if (strm->avail_in == 0) { | |
| if (xz_avail(state) == -1) | |
| return -1; | |
| if (strm->avail_in == 0) | |
| return 0; | |
| } | |
| /* look for the xz magic header bytes */ | |
| if (is_format_xz(state) || is_format_lzma(state)) { | |
| state->how = LZMA; | |
| state->direct = 0; | |
| return 0; | |
| } | |
| #ifdef HAVE_ZLIB_H | |
| /* look for the gzip magic header bytes 31 and 139 */ | |
| if (strm->next_in[0] == 31) { | |
| strm->avail_in--; | |
| strm->next_in++; | |
| if (strm->avail_in == 0 && xz_avail(state) == -1) | |
| return -1; | |
| if (strm->avail_in && strm->next_in[0] == 139) { | |
| /* we have a gzip header, woo hoo! */ | |
| strm->avail_in--; | |
| strm->next_in++; | |
| /* skip rest of header */ | |
| if (NEXT() != 8) { /* compression method */ | |
| xz_error(state, LZMA_DATA_ERROR, | |
| "unknown compression method"); | |
| return -1; | |
| } | |
| flags = NEXT(); | |
| if (flags & 0xe0) { /* reserved flag bits */ | |
| xz_error(state, LZMA_DATA_ERROR, | |
| "unknown header flags set"); | |
| return -1; | |
| } | |
| NEXT(); /* modification time */ | |
| NEXT(); | |
| NEXT(); | |
| NEXT(); | |
| NEXT(); /* extra flags */ | |
| NEXT(); /* operating system */ | |
| if (flags & 4) { /* extra field */ | |
| len = (unsigned) NEXT(); | |
| len += (unsigned) NEXT() << 8; | |
| while (len--) | |
| if (NEXT() < 0) | |
| break; | |
| } | |
| if (flags & 8) /* file name */ | |
| while (NEXT() > 0) ; | |
| if (flags & 16) /* comment */ | |
| while (NEXT() > 0) ; | |
| if (flags & 2) { /* header crc */ | |
| NEXT(); | |
| NEXT(); | |
| } | |
| /* an unexpected end of file is not checked for here -- it will be | |
| * noticed on the first request for uncompressed data */ | |
| /* set up for decompression */ | |
| inflateReset(&state->zstrm); | |
| state->zstrm.adler = crc32(0L, Z_NULL, 0); | |
| state->how = GZIP; | |
| state->direct = 0; | |
| return 0; | |
| } else { | |
| /* not a gzip file -- save first byte (31) and fall to raw i/o */ | |
| state->out[0] = 31; | |
| state->have = 1; | |
| } | |
| } | |
| #endif | |
| /* doing raw i/o, save start of raw data for seeking, copy any leftover | |
| * input to output -- this assumes that the output buffer is larger than | |
| * the input buffer, which also assures space for gzungetc() */ | |
| state->raw = state->pos; | |
| state->next = state->out; | |
| if (strm->avail_in) { | |
| memcpy(state->next + state->have, strm->next_in, strm->avail_in); | |
| state->have += strm->avail_in; | |
| strm->avail_in = 0; | |
| } | |
| state->how = COPY; | |
| state->direct = 1; | |
| return 0; | |
| } | |
| static int | |
| xz_decomp(xz_statep state) | |
| { | |
| int ret; | |
| unsigned had; | |
| unsigned long crc, len; | |
| lzma_stream *strm = &(state->strm); | |
| lzma_action action = LZMA_RUN; | |
| /* fill output buffer up to end of deflate stream */ | |
| had = strm->avail_out; | |
| do { | |
| /* get more input for inflate() */ | |
| if (strm->avail_in == 0 && xz_avail(state) == -1) | |
| return -1; | |
| if (strm->avail_in == 0) { | |
| xz_error(state, LZMA_DATA_ERROR, "unexpected end of file"); | |
| return -1; | |
| } | |
| if (state->eof) | |
| action = LZMA_FINISH; | |
| /* decompress and handle errors */ | |
| #ifdef HAVE_ZLIB_H | |
| if (state->how == GZIP) { | |
| state->zstrm.avail_in = (uInt) state->strm.avail_in; | |
| state->zstrm.next_in = (Bytef *) state->strm.next_in; | |
| state->zstrm.avail_out = (uInt) state->strm.avail_out; | |
| state->zstrm.next_out = (Bytef *) state->strm.next_out; | |
| ret = inflate(&state->zstrm, Z_NO_FLUSH); | |
| if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) { | |
| xz_error(state, Z_STREAM_ERROR, | |
| "internal error: inflate stream corrupt"); | |
| return -1; | |
| } | |
| if (ret == Z_MEM_ERROR) | |
| ret = LZMA_MEM_ERROR; | |
| if (ret == Z_DATA_ERROR) | |
| ret = LZMA_DATA_ERROR; | |
| if (ret == Z_STREAM_END) | |
| ret = LZMA_STREAM_END; | |
| state->strm.avail_in = state->zstrm.avail_in; | |
| state->strm.next_in = state->zstrm.next_in; | |
| state->strm.avail_out = state->zstrm.avail_out; | |
| state->strm.next_out = state->zstrm.next_out; | |
| } else /* state->how == LZMA */ | |
| #endif | |
| ret = lzma_code(strm, action); | |
| if (ret == LZMA_MEM_ERROR) { | |
| xz_error(state, LZMA_MEM_ERROR, "out of memory"); | |
| return -1; | |
| } | |
| if (ret == LZMA_DATA_ERROR) { | |
| xz_error(state, LZMA_DATA_ERROR, "compressed data error"); | |
| return -1; | |
| } | |
| if (ret == LZMA_PROG_ERROR) { | |
| xz_error(state, LZMA_PROG_ERROR, "compression error"); | |
| return -1; | |
| } | |
| } while (strm->avail_out && ret != LZMA_STREAM_END); | |
| /* update available output and crc check value */ | |
| state->have = had - strm->avail_out; | |
| state->next = strm->next_out - state->have; | |
| #ifdef HAVE_ZLIB_H | |
| state->zstrm.adler = | |
| crc32(state->zstrm.adler, state->next, state->have); | |
| #endif | |
| if (ret == LZMA_STREAM_END) { | |
| #ifdef HAVE_ZLIB_H | |
| if (state->how == GZIP) { | |
| if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) { | |
| xz_error(state, LZMA_DATA_ERROR, "unexpected end of file"); | |
| return -1; | |
| } | |
| if (crc != state->zstrm.adler) { | |
| xz_error(state, LZMA_DATA_ERROR, "incorrect data check"); | |
| return -1; | |
| } | |
| if (len != (state->zstrm.total_out & 0xffffffffL)) { | |
| xz_error(state, LZMA_DATA_ERROR, "incorrect length check"); | |
| return -1; | |
| } | |
| state->strm.avail_in = 0; | |
| state->strm.next_in = NULL; | |
| state->strm.avail_out = 0; | |
| state->strm.next_out = NULL; | |
| } else | |
| #endif | |
| if (strm->avail_in != 0 || !state->eof) { | |
| xz_error(state, LZMA_DATA_ERROR, "trailing garbage"); | |
| return -1; | |
| } | |
| state->how = LOOK; /* ready for next stream, once have is 0 (leave | |
| * state->direct unchanged to remember how) */ | |
| } | |
| /* good decompression */ | |
| return 0; | |
| } | |
| static int | |
| xz_make(xz_statep state) | |
| { | |
| lzma_stream *strm = &(state->strm); | |
| if (state->how == LOOK) { /* look for lzma / gzip header */ | |
| if (xz_head(state) == -1) | |
| return -1; | |
| if (state->have) /* got some data from xz_head() */ | |
| return 0; | |
| } | |
| if (state->how == COPY) { /* straight copy */ | |
| if (xz_load(state, state->out, state->size << 1, &(state->have)) == | |
| -1) | |
| return -1; | |
| state->next = state->out; | |
| } else if (state->how == LZMA || state->how == GZIP) { /* decompress */ | |
| strm->avail_out = state->size << 1; | |
| strm->next_out = state->out; | |
| if (xz_decomp(state) == -1) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int | |
| xz_skip(xz_statep state, uint64_t len) | |
| { | |
| unsigned n; | |
| /* skip over len bytes or reach end-of-file, whichever comes first */ | |
| while (len) | |
| /* skip over whatever is in output buffer */ | |
| if (state->have) { | |
| n = (uint64_t) state->have > len ? | |
| (unsigned) len : state->have; | |
| state->have -= n; | |
| state->next += n; | |
| state->pos += n; | |
| len -= n; | |
| } | |
| /* output buffer empty -- return if we're at the end of the input */ | |
| else if (state->eof && state->strm.avail_in == 0) | |
| break; | |
| /* need more data to skip -- load up output buffer */ | |
| else { | |
| /* get more output, looking for header if required */ | |
| if (xz_make(state) == -1) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| int | |
| __libxml2_xzread(xzFile file, void *buf, unsigned len) | |
| { | |
| unsigned got, n; | |
| xz_statep state; | |
| lzma_stream *strm; | |
| /* get internal structure */ | |
| if (file == NULL) | |
| return -1; | |
| state = (xz_statep) file; | |
| strm = &(state->strm); | |
| /* check that we're reading and that there's no error */ | |
| if (state->err != LZMA_OK) | |
| return -1; | |
| /* since an int is returned, make sure len fits in one, otherwise return | |
| * with an error (this avoids the flaw in the interface) */ | |
| if ((int) len < 0) { | |
| xz_error(state, LZMA_BUF_ERROR, | |
| "requested length does not fit in int"); | |
| return -1; | |
| } | |
| /* if len is zero, avoid unnecessary operations */ | |
| if (len == 0) | |
| return 0; | |
| /* process a skip request */ | |
| if (state->seek) { | |
| state->seek = 0; | |
| if (xz_skip(state, state->skip) == -1) | |
| return -1; | |
| } | |
| /* get len bytes to buf, or less than len if at the end */ | |
| got = 0; | |
| do { | |
| /* first just try copying data from the output buffer */ | |
| if (state->have) { | |
| n = state->have > len ? len : state->have; | |
| memcpy(buf, state->next, n); | |
| state->next += n; | |
| state->have -= n; | |
| } | |
| /* output buffer empty -- return if we're at the end of the input */ | |
| else if (state->eof && strm->avail_in == 0) | |
| break; | |
| /* need output data -- for small len or new stream load up our output | |
| * buffer */ | |
| else if (state->how == LOOK || len < (state->size << 1)) { | |
| /* get more output, looking for header if required */ | |
| if (xz_make(state) == -1) | |
| return -1; | |
| continue; /* no progress yet -- go back to memcpy() above */ | |
| /* the copy above assures that we will leave with space in the | |
| * output buffer, allowing at least one gzungetc() to succeed */ | |
| } | |
| /* large len -- read directly into user buffer */ | |
| else if (state->how == COPY) { /* read directly */ | |
| if (xz_load(state, buf, len, &n) == -1) | |
| return -1; | |
| } | |
| /* large len -- decompress directly into user buffer */ | |
| else { /* state->how == LZMA */ | |
| strm->avail_out = len; | |
| strm->next_out = buf; | |
| if (xz_decomp(state) == -1) | |
| return -1; | |
| n = state->have; | |
| state->have = 0; | |
| } | |
| /* update progress */ | |
| len -= n; | |
| buf = (char *) buf + n; | |
| got += n; | |
| state->pos += n; | |
| } while (len); | |
| /* return number of bytes read into user buffer (will fit in int) */ | |
| return (int) got; | |
| } | |
| int | |
| __libxml2_xzclose(xzFile file) | |
| { | |
| int ret; | |
| xz_statep state; | |
| /* get internal structure */ | |
| if (file == NULL) | |
| return LZMA_DATA_ERROR; | |
| state = (xz_statep) file; | |
| /* free memory and close file */ | |
| if (state->size) { | |
| lzma_end(&(state->strm)); | |
| #ifdef HAVE_ZLIB_H | |
| if (state->init == 1) | |
| inflateEnd(&(state->zstrm)); | |
| state->init = 0; | |
| #endif | |
| xmlFree(state->out); | |
| xmlFree(state->in); | |
| } | |
| xmlFree(state->path); | |
| ret = close(state->fd); | |
| xmlFree(state); | |
| return ret ? ret : LZMA_OK; | |
| } | |
| #endif /* LIBXML_LZMA_ENABLED */ |