Fix to reduce block artifacts from vp8 temporal denoiser.
If the denoiser filter causes too big a change in the absolute pixel difference
(between source and denoised signal), the block is not denoised, which can cause
visual block artifacts. This change applies a second adjustment to the temporal filter
to effectively allow for a (weaker) denoising for such blocks (which can keep
the absolute differnence within the tolerance range in most cases).
This helps to reduce some of the block artifacts from the denoising.
The additional cost of re-applying the filter to this set of blocks is low,
as the percentage of blocks per frame (with too big a change in absolute pixel difference)
is typically small, 2-5%.
Change-Id: Id9b56e59e33f3c22e79d2f89f763bdde246fdf3f
diff --git a/vp8/encoder/denoising.c b/vp8/encoder/denoising.c
index 1e645fb..0c83188 100644
--- a/vp8/encoder/denoising.c
+++ b/vp8/encoder/denoising.c
@@ -136,8 +136,56 @@
sum_diff_thresh= SUM_DIFF_THRESHOLD;
if (increase_denoising) sum_diff_thresh = SUM_DIFF_THRESHOLD_HIGH;
- if (abs(sum_diff) > sum_diff_thresh)
+ if (abs(sum_diff) > sum_diff_thresh) {
+ // Before returning to copy the block (i.e., apply no denoising), check
+ // if we can still apply some (weaker) temporal filtering to this block,
+ // that would otherwise not be denoised at all. Simplest is to apply
+ // an additional adjustment to running_avg_y to bring it closer to sig.
+ // The adjustment is capped by a maximum delta, and chosen such that
+ // in most cases the resulting sum_diff will be within the
+ // accceptable range given by sum_diff_thresh.
+
+ // The delta is set by the excess of absolute pixel diff over threshold.
+ int delta = ((abs(sum_diff) - sum_diff_thresh) >> 8) + 1;
+ // Only apply the adjustment for max delta up to 3.
+ if (delta < 4) {
+ sig -= sig_stride * 16;
+ mc_running_avg_y -= mc_avg_y_stride * 16;
+ running_avg_y -= avg_y_stride * 16;
+ for (r = 0; r < 16; ++r) {
+ for (c = 0; c < 16; ++c) {
+ int diff = mc_running_avg_y[c] - sig[c];
+ int adjustment = abs(diff);
+ if (adjustment > delta)
+ adjustment = delta;
+ if (diff > 0) {
+ // Bring denoised signal down.
+ if (running_avg_y[c] - adjustment < 0)
+ running_avg_y[c] = 0;
+ else
+ running_avg_y[c] = running_avg_y[c] - adjustment;
+ sum_diff -= adjustment;
+ } else if (diff < 0) {
+ // Bring denoised signal up.
+ if (running_avg_y[c] + adjustment > 255)
+ running_avg_y[c] = 255;
+ else
+ running_avg_y[c] = running_avg_y[c] + adjustment;
+ sum_diff += adjustment;
+ }
+ }
+ // TODO(marpan): Check here if abs(sum_diff) has gone below the
+ // threshold sum_diff_thresh, and if so, we can exit the row loop.
+ sig += sig_stride;
+ mc_running_avg_y += mc_avg_y_stride;
+ running_avg_y += avg_y_stride;
+ }
+ if (abs(sum_diff) > sum_diff_thresh)
+ return COPY_BLOCK;
+ } else {
return COPY_BLOCK;
+ }
+ }
vp8_copy_mem16x16(running_avg_y_start, avg_y_stride, sig_start, sig_stride);
return FILTER_BLOCK;
diff --git a/vp8/encoder/x86/denoising_sse2.c b/vp8/encoder/x86/denoising_sse2.c
index 5112f89..ff439dd 100644
--- a/vp8/encoder/x86/denoising_sse2.c
+++ b/vp8/encoder/x86/denoising_sse2.c
@@ -112,9 +112,70 @@
sum_diff_thresh = SUM_DIFF_THRESHOLD;
if (increase_denoising) sum_diff_thresh = SUM_DIFF_THRESHOLD_HIGH;
- if (abs(sum_diff) > sum_diff_thresh)
- {
+ if (abs(sum_diff) > sum_diff_thresh) {
+ // Before returning to copy the block (i.e., apply no denoising),
+ // checK if we can still apply some (weaker) temporal filtering to
+ // this block, that would otherwise not be denoised at all. Simplest
+ // is to apply an additional adjustment to running_avg_y to bring it
+ // closer to sig. The adjustment is capped by a maximum delta, and
+ // chosen such that in most cases the resulting sum_diff will be
+ // within the accceptable range given by sum_diff_thresh.
+
+ // The delta is set by the excess of absolute pixel diff over the
+ // threshold.
+ int delta = ((abs(sum_diff) - sum_diff_thresh) >> 8) + 1;
+ // Only apply the adjustment for max delta up to 3.
+ if (delta < 4) {
+ const __m128i k_delta = _mm_set1_epi8(delta);
+ sig -= sig_stride * 16;
+ mc_running_avg_y -= mc_avg_y_stride * 16;
+ running_avg_y -= avg_y_stride * 16;
+ for (r = 0; r < 16; ++r) {
+ __m128i v_running_avg_y =
+ _mm_loadu_si128((__m128i *)(&running_avg_y[0]));
+ // Calculate differences.
+ const __m128i v_sig = _mm_loadu_si128((__m128i *)(&sig[0]));
+ const __m128i v_mc_running_avg_y =
+ _mm_loadu_si128((__m128i *)(&mc_running_avg_y[0]));
+ const __m128i pdiff = _mm_subs_epu8(v_mc_running_avg_y, v_sig);
+ const __m128i ndiff = _mm_subs_epu8(v_sig, v_mc_running_avg_y);
+ // Obtain the sign. FF if diff is negative.
+ const __m128i diff_sign = _mm_cmpeq_epi8(pdiff, k_0);
+ // Clamp absolute difference to delta to get the adjustment.
+ const __m128i adj =
+ _mm_min_epu8(_mm_or_si128(pdiff, ndiff), k_delta);
+ // Restore the sign and get positive and negative adjustments.
+ __m128i padj, nadj;
+ padj = _mm_andnot_si128(diff_sign, adj);
+ nadj = _mm_and_si128(diff_sign, adj);
+ // Calculate filtered value.
+ v_running_avg_y = _mm_subs_epu8(v_running_avg_y, padj);
+ v_running_avg_y = _mm_adds_epu8(v_running_avg_y, nadj);
+ _mm_storeu_si128((__m128i *)running_avg_y, v_running_avg_y);
+
+ // Accumulate the adjustments.
+ acc_diff = _mm_subs_epi8(acc_diff, padj);
+ acc_diff = _mm_adds_epi8(acc_diff, nadj);
+
+ // Update pointers for next iteration.
+ sig += sig_stride;
+ mc_running_avg_y += mc_avg_y_stride;
+ running_avg_y += avg_y_stride;
+ }
+ {
+ // Update the sum of all pixel differences of this MB.
+ union sum_union s;
+ s.v = acc_diff;
+ sum_diff = s.e[0] + s.e[1] + s.e[2] + s.e[3] + s.e[4] + s.e[5]
+ + s.e[6] + s.e[7] + s.e[8] + s.e[9] + s.e[10] + s.e[11]
+ + s.e[12] + s.e[13] + s.e[14] + s.e[15];
+ if (abs(sum_diff) > sum_diff_thresh) {
+ return COPY_BLOCK;
+ }
+ }
+ } else {
return COPY_BLOCK;
+ }
}
}
