blob: 7098ae347f3ca811bcd02b0f5fb9947999b63106 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2010-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* NFA interface to NFCEE
*
******************************************************************************/
#ifndef NFA_EE_API_H
#define NFA_EE_API_H
#include "nfc_target.h"
#include "nfa_api.h"
#include "nfc_api.h"
/*****************************************************************************
** Constants and data types
*****************************************************************************/
#define NFA_MAX_AID_LEN NFC_MAX_AID_LEN /* 16 per ISO 7816 specification */
#define NFA_EE_HANDLE_DH (NFA_HANDLE_GROUP_EE|NFC_DH_ID)
/* NFA EE callback events */
enum
{
NFA_EE_DISCOVER_EVT, /* The status for NFA_EeDiscover () */
NFA_EE_REGISTER_EVT, /* The status for NFA_EeRegister () */
NFA_EE_DEREGISTER_EVT, /* The status for NFA_EeDeregister () */
NFA_EE_MODE_SET_EVT, /* The status for activating or deactivating an NFCEE */
NFA_EE_ADD_AID_EVT, /* The status for adding an AID to a routing table entry */
NFA_EE_REMOVE_AID_EVT, /* The status for removing an AID from a routing table */
NFA_EE_SET_TECH_CFG_EVT, /* The status for setting the routing based on RF tech. */
NFA_EE_SET_PROTO_CFG_EVT, /* The status for setting the routing based on protocols */
NFA_EE_CONNECT_EVT, /* Result of NFA_EeConnect */
NFA_EE_DATA_EVT, /* Received data from NFCEE. */
NFA_EE_DISCONNECT_EVT, /* NFCEE connection closed. */
NFA_EE_NEW_EE_EVT, /* A new NFCEE is discovered */
NFA_EE_ACTION_EVT, /* An action happened in NFCEE */
NFA_EE_DISCOVER_REQ_EVT, /* NFCEE Discover Request Notification */
NFA_EE_ROUT_ERR_EVT, /* Error - exceed NFCC CE Routing size */
NFA_EE_NO_MEM_ERR_EVT, /* Error - out of GKI buffers */
NFA_EE_NO_CB_ERR_EVT /* Error - Can not find control block or wrong state */
};
typedef UINT8 tNFA_EE_EVT;
/* tNFA_NFCEE_INTERFACE values */
#define NFA_EE_INTERFACE_APDU NFC_NFCEE_INTERFACE_APDU /* APDU Interface */
#define NFA_EE_INTERFACE_HCI_ACCESS NFC_NFCEE_INTERFACE_HCI_ACCESS /* HCI Access Interface*/
#define NFA_EE_INTERFACE_T3T NFC_NFCEE_INTERFACE_T3T /* T3T Command Interface*/
#define NFA_EE_INTERFACE_TRANSPARENT NFC_NFCEE_INTERFACE_TRANSPARENT /* Transparent Interface*/
#define NFA_EE_INTERFACE_PROPRIETARY NFC_NFCEE_INTERFACE_PROPRIETARY /* Proprietary */
typedef UINT8 tNFA_EE_INTERFACE;
#define NFA_EE_TAG_HW_ID NFC_NFCEE_TAG_HW_ID /* HW/Registration ID */
#define NFA_EE_TAG_ATR_BYTES NFC_NFCEE_TAG_ATR_BYTES /* ATR Bytes */
#define NFA_EE_TAG_T3T_INFO NFC_NFCEE_TAG_T3T_INFO /* T3T Supplement. Info */
#define NFA_EE_TAG_HCI_HOST_ID NFC_NFCEE_TAG_HCI_HOST_ID /* Broadcom Proprietary */
typedef UINT8 tNFA_EE_TAG;
/* for NFA_EeModeSet () */
#define NFA_EE_MD_ACTIVATE NFC_MODE_ACTIVATE
#define NFA_EE_MD_DEACTIVATE NFC_MODE_DEACTIVATE
typedef UINT8 tNFA_EE_MD;
#define NFA_EE_PWR_STATE_ON 0x01 /* The device is on */
#define NFA_EE_PWR_STATE_SWITCH_OFF 0x02 /* The device is switched off */
#define NFA_EE_PWR_STATE_BATT_OFF 0x04 /* The device's battery is removed */
#define NFA_EE_PWR_STATE_NONE 0 /* used to remove a particular technology or protocol based routing cfg of a handle from the routing table. */
typedef UINT8 tNFA_EE_PWR_STATE;
#define NFA_EE_STATUS_INACTIVE NFC_NFCEE_STATUS_INACTIVE /* NFCEE connected and inactive */
#define NFA_EE_STATUS_ACTIVE NFC_NFCEE_STATUS_ACTIVE /* NFCEE connected and active */
#define NFA_EE_STATUS_REMOVED NFC_NFCEE_STATUS_REMOVED /* NFCEE removed */
#define NFA_EE_STATUS_PENDING 0x10 /* waiting for response from NFCC */
#define NFA_EE_STATUS_ACTIVATING (NFA_EE_STATUS_PENDING+NFC_NFCEE_STATUS_ACTIVE)
#define NFA_EE_STATUS_DEACTIVATING (NFA_EE_STATUS_PENDING+NFC_NFCEE_STATUS_INACTIVE)
typedef UINT8 tNFA_EE_STATUS;
/* additional NFCEE Info */
typedef struct
{
tNFA_EE_TAG tag;
UINT8 len;
UINT8 info[NFC_MAX_EE_INFO];
} tNFA_EE_TLV;
typedef struct
{
tNFA_HANDLE ee_handle; /* handle for NFCEE oe DH */
tNFA_EE_STATUS ee_status; /* The NFCEE status */
UINT8 num_interface; /* number of NFCEE interface*/
tNFA_EE_INTERFACE ee_interface[NFC_MAX_EE_INTERFACE];/* NFCEE supported interface */
UINT8 num_tlvs; /* number of TLVs */
tNFA_EE_TLV ee_tlv[NFC_MAX_EE_TLVS];/* the TLV */
} tNFA_EE_INFO;
typedef struct
{
tNFA_STATUS status; /* NFA_STATUS_OK is successful */
UINT8 num_ee; /* number of NFCEEs found */
tNFA_EE_INFO ee_info[NFA_EE_MAX_EE_SUPPORTED];/*NFCEE information */
} tNFA_EE_DISCOVER;
typedef struct
{
tNFA_HANDLE ee_handle; /* Handle of NFCEE */
tNFA_STATUS status; /* NFA_STATUS_OK is successful */
tNFA_EE_INTERFACE ee_interface; /* NFCEE interface associated with this connection */
} tNFA_EE_CONNECT;
#define NFA_EE_TRGR_SELECT NFC_EE_TRIG_7816_SELECT /* ISO 7816-4 SELECT command */
#define NFA_EE_TRGR_RF_PROTOCOL NFC_EE_TRIG_RF_PROTOCOL /* RF Protocol changed */
#define NFA_EE_TRGR_RF_TECHNOLOGY NFC_EE_TRIG_RF_TECHNOLOGY/* RF Technology changed */
#define NFA_EE_TRGR_APP_INIT NFC_EE_TRIG_APP_INIT /* Application initiation */
typedef tNFC_EE_TRIGGER tNFA_EE_TRIGGER;
/* Union of NFCEE action parameter depending on the associated trigger */
typedef union
{
tNFA_NFC_PROTOCOL protocol; /* NFA_EE_TRGR_RF_PROTOCOL: the protocol that triggers this event */
tNFC_RF_TECH technology; /* NFA_EE_TRGR_RF_TECHNOLOGY:the technology that triggers this event */
tNFC_AID aid; /* NFA_EE_TRGR_SELECT : the AID in the received SELECT AID command */
tNFC_APP_INIT app_init; /* NFA_EE_TRGR_APP_INIT: The information for the application initiated trigger */
} tNFA_EE_ACTION_PARAM;
typedef struct
{
tNFA_HANDLE ee_handle; /* Handle of NFCEE */
tNFA_EE_TRIGGER trigger; /* the trigger of this event */
tNFA_EE_ACTION_PARAM param;
} tNFA_EE_ACTION;
typedef struct
{
tNFA_HANDLE ee_handle; /* Handle of NFCEE */
tNFA_STATUS status; /* NFA_STATUS_OK is successful */
tNFA_EE_STATUS ee_status; /* The NFCEE status */
} tNFA_EE_MODE_SET;
typedef struct
{
tNFA_HANDLE ee_handle; /* Handle of MFCEE */
tNFA_NFC_PROTOCOL la_protocol; /* Listen A protocol */
tNFA_NFC_PROTOCOL lb_protocol; /* Listen B protocol */
tNFA_NFC_PROTOCOL lf_protocol; /* Listen F protocol */
tNFA_NFC_PROTOCOL lbp_protocol; /* Listen B' protocol */
} tNFA_EE_DISCOVER_INFO;
/* Data for NFA_EE_DISCOVER_REQ_EVT */
typedef struct
{
UINT8 status; /* NFA_STATUS_OK if successful */
UINT8 num_ee; /* number of MFCEE information */
tNFA_EE_DISCOVER_INFO ee_disc_info[NFA_DM_MAX_UICC]; /* MFCEE DISCOVER Request info */
} tNFA_EE_DISCOVER_REQ;
/* Union of all EE callback structures */
typedef union
{
tNFA_STATUS status; /* NFA_STATUS_OK is successful; otherwise NFA_STATUS_FAILED */
tNFA_DATA data;
tNFA_HANDLE handle;
tNFA_EE_DISCOVER ee_discover;
tNFA_STATUS ee_register;
tNFA_STATUS deregister;
tNFA_STATUS add_aid;
tNFA_STATUS remove_aid;
tNFA_STATUS set_tech;
tNFA_STATUS set_proto;
tNFA_EE_CONNECT connect;
tNFA_EE_ACTION action;
tNFA_EE_MODE_SET mode_set;
tNFA_EE_INFO new_ee;
tNFA_EE_DISCOVER_REQ discover_req;
} tNFA_EE_CBACK_DATA;
/* EE callback */
typedef void (tNFA_EE_CBACK) (tNFA_EE_EVT event, tNFA_EE_CBACK_DATA *p_data);
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function NFA_EeDiscover
**
** Description This function retrieves the NFCEE information from NFCC.
** The NFCEE information is reported in NFA_EE_DISCOVER_EVT.
**
** This function may be called when a system supports removable
** NFCEEs,
**
** Returns NFA_STATUS_OK if information is retrieved successfully
** NFA_STATUS_FAILED If wrong state (retry later)
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeDiscover (tNFA_EE_CBACK *p_cback);
/*******************************************************************************
**
** Function NFA_EeGetInfo
**
** Description This function retrieves the NFCEE information from NFA.
** The actual number of NFCEE is returned in p_num_nfcee
** and NFCEE information is returned in p_info
**
** Returns NFA_STATUS_OK if information is retrieved successfully
** NFA_STATUS_FAILED If wrong state (retry later)
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeGetInfo (UINT8 *p_num_nfcee,
tNFA_EE_INFO *p_info);
/*******************************************************************************
**
** Function NFA_EeRegister
**
** Description This function registers a callback function to receive the
** events from NFA-EE module.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeRegister (tNFA_EE_CBACK *p_cback);
/*******************************************************************************
**
** Function NFA_EeDeregister
**
** Description This function de-registers the callback function
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeDeregister (tNFA_EE_CBACK *p_cback);
/*******************************************************************************
**
** Function NFA_EeModeSet
**
** Description This function is called to activate (mode = NFA_EE_MD_ACTIVATE)
** or deactivate (mode = NFA_EE_MD_DEACTIVATE) the NFCEE
** identified by the given ee_handle. The result of this
** operation is reported with the NFA_EE_MODE_SET_EVT.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeModeSet (tNFA_HANDLE ee_handle,
tNFA_EE_MD mode);
/*******************************************************************************
**
** Function NFA_EeSetDefaultTechRouting
**
** Description This function is called to add, change or remove the
** default routing based on RF technology in the listen mode
** routing table for the given ee_handle. The status of this
** operation is reported as the NFA_EE_SET_TECH_CFG_EVT.
**
** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT
** should happen before calling this function
**
** Note: NFA_EeUpdateNow() should be called after last NFA-EE function
** to change the listen mode routing is called.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeSetDefaultTechRouting (tNFA_HANDLE ee_handle,
tNFA_TECHNOLOGY_MASK technologies_switch_on,
tNFA_TECHNOLOGY_MASK technologies_switch_off,
tNFA_TECHNOLOGY_MASK technologies_battery_off);
/*******************************************************************************
**
** Function NFA_EeSetDefaultProtoRouting
**
** Description This function is called to add, change or remove the
** default routing based on Protocol in the listen mode routing
** table for the given ee_handle. The status of this
** operation is reported as the NFA_EE_SET_PROTO_CFG_EVT.
**
** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT
** should happen before calling this function
**
** Note: NFA_EeUpdateNow() should be called after last NFA-EE function
** to change the listen mode routing is called.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeSetDefaultProtoRouting (tNFA_HANDLE ee_handle,
tNFA_PROTOCOL_MASK protocols_switch_on,
tNFA_PROTOCOL_MASK protocols_switch_off,
tNFA_PROTOCOL_MASK protocols_battery_off);
/*******************************************************************************
**
** Function NFA_EeAddAidRouting
**
** Description This function is called to add an AID entry in the
** listen mode routing table in NFCC. The status of this
** operation is reported as the NFA_EE_ADD_AID_EVT.
**
** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT
** should happen before calling this function
**
** Note: NFA_EeUpdateNow() should be called after last NFA-EE function
** to change the listen mode routing is called.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeAddAidRouting (tNFA_HANDLE ee_handle,
UINT8 aid_len,
UINT8 *p_aid,
tNFA_EE_PWR_STATE power_state);
/*******************************************************************************
**
** Function NFA_EeRemoveAidRouting
**
** Description This function is called to remove the given AID entry from the
** listen mode routing table. If the entry configures VS,
** it is also removed. The status of this operation is reported
** as the NFA_EE_REMOVE_AID_EVT.
**
** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT
** should happen before calling this function
**
** Note: NFA_EeUpdateNow() should be called after last NFA-EE function
** to change the listen mode routing is called.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeRemoveAidRouting (UINT8 aid_len,
UINT8 *p_aid);
/*******************************************************************************
**
** Function NFA_EeUpdateNow
**
** Description This function is called to send the current listen mode
** routing table and VS configuration to the NFCC
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeUpdateNow (void);
/*******************************************************************************
**
** Function NFA_EeConnect
**
** Description Open connection to an NFCEE attached to the NFCC
**
** The status of this operation is
** reported with the NFA_EE_CONNECT_EVT.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeConnect (tNFA_HANDLE ee_handle,
UINT8 ee_interface,
tNFA_EE_CBACK *p_cback);
/*******************************************************************************
**
** Function NFA_EeSendData
**
** Description Send data to the given NFCEE.
** This function shall be called after NFA_EE_CONNECT_EVT is reported
** and before NFA_EeDisconnect is called on the given ee_handle.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeSendData (tNFA_HANDLE ee_handle,
UINT16 data_len,
UINT8 *p_data);
/*******************************************************************************
**
** Function NFA_EeDisconnect
**
** Description Disconnect (if a connection is currently open) from an
** NFCEE interface. The result of this operation is reported
** with the NFA_EE_DISCONNECT_EVT.
**
** Returns NFA_STATUS_OK if successfully initiated
** NFA_STATUS_FAILED otherwise
** NFA_STATUS_INVALID_PARAM If bad parameter
**
*******************************************************************************/
NFC_API extern tNFA_STATUS NFA_EeDisconnect (tNFA_HANDLE ee_handle);
#ifdef __cplusplus
}
#endif
#endif /* NFA_EE_API_H */