halimpl/bcm2079x/hal/hal/nfc_hal_api.c

/******************************************************************************
 *
 *  Copyright (C) 2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  NFC Hardware Abstraction Layer API: Implementation for Broadcom NFC
 *  controllers
 *
 ******************************************************************************/
#include "gki.h"
#include "nfc_hal_target.h"
#include "nfc_hal_api.h"
#include "nfc_hal_int.h"

/*******************************************************************************
** NFC_HAL_TASK declarations
*******************************************************************************/
#define NFC_HAL_TASK_STR            ((INT8 *) "NFC_HAL_TASK")
#define NFC_HAL_TASK_STACK_SIZE     0x400
UINT32 nfc_hal_task_stack[(NFC_HAL_TASK_STACK_SIZE+3)/4];

/*******************************************************************************
**
** Function         HAL_NfcInitialize
**
** Description      Called when HAL library is loaded.
**
**                  Initialize GKI and start the HCIT task
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcInitialize (void)
{
    NCI_TRACE_API0 ("HAL_NfcInitialize ()");

    /* Initialize HAL control block */
    nfc_hal_main_init ();

    /* Initialize OS */
    GKI_init ();

    /* Enable interrupts */
    GKI_enable ();

    /* Create the NCI transport task */
    GKI_create_task ((TASKPTR)nfc_hal_main_task,
                     NFC_HAL_TASK,
                     NFC_HAL_TASK_STR,
                     (UINT16 *) ((UINT8 *)nfc_hal_task_stack + NFC_HAL_TASK_STACK_SIZE),
                     sizeof(nfc_hal_task_stack), NULL, NULL);

    /* Start tasks */
    GKI_run (0);
}

/*******************************************************************************
**
** Function         HAL_NfcTerminate
**
** Description      Called to terminate NFC HAL
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcTerminate(void)
{
    NCI_TRACE_API0 ("HAL_NfcTerminate ()");
}


/*******************************************************************************
**
** Function         HAL_NfcOpen
**
** Description      Open transport and intialize the NFCC, and
**                  Register callback for HAL event notifications,
**
**                  HAL_OPEN_CPLT_EVT will notify when operation is complete.
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcOpen (tHAL_NFC_CBACK *p_hal_cback, tHAL_NFC_DATA_CBACK *p_data_cback)
{
    NCI_TRACE_API0 ("HAL_NfcOpen ()");

    /* Only handle if HAL is not opened (stack cback is NULL) */
    if (p_hal_cback)
    {
        nfc_hal_dm_init ();
        nfc_hal_cb.p_stack_cback = p_hal_cback;
        nfc_hal_cb.p_data_cback  = p_data_cback;

        /* Send startup event to NFC_HAL_TASK */
        GKI_send_event (NFC_HAL_TASK, NFC_HAL_TASK_EVT_INITIALIZE);
    }
}

/*******************************************************************************
**
** Function         HAL_NfcClose
**
** Description      Prepare for shutdown. A HAL_CLOSE_DONE_EVENT will be
**                  reported when complete.
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcClose (void)
{
    NCI_TRACE_API0 ("HAL_NfcClose ()");

    /* Only handle if HAL is opened (stack cback is not-NULL) */
    if (nfc_hal_cb.p_stack_cback)
    {
        /* Send shutdown event to NFC_HAL_TASK */
        GKI_send_event (NFC_HAL_TASK, NFC_HAL_TASK_EVT_TERMINATE);
    }
}

/*******************************************************************************
**
** Function         HAL_NfcCoreInitialized
**
** Description      Called after the CORE_INIT_RSP is received from the NFCC.
**                  At this time, the HAL can do any chip-specific configuration,
**                  and when finished signal the libnfc-nci with event
**                  HAL_POST_INIT_DONE.
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcCoreInitialized (UINT8 *p_core_init_rsp_params)
{
    NFC_HDR *p_msg;
    UINT16  size;

    NCI_TRACE_API0 ("HAL_NfcCoreInitialized ()");

    /* NCI payload len + NCI header size */
    size = p_core_init_rsp_params[2] + NCI_MSG_HDR_SIZE;

    /* Send message to NFC_HAL_TASK */
    if ((p_msg = (NFC_HDR *)GKI_getbuf ((UINT16)(size + NFC_HDR_SIZE))) != NULL)
    {
        p_msg->event  = NFC_HAL_EVT_POST_CORE_RESET;
        p_msg->offset = 0;
        p_msg->len    = size;
        p_msg->layer_specific = 0;
        memcpy ((UINT8 *)(p_msg + 1) + p_msg->offset, p_core_init_rsp_params, size);

        GKI_send_msg (NFC_HAL_TASK, NFC_HAL_TASK_MBOX, p_msg);
    }
}

/*******************************************************************************
**
** Function         HAL_NfcWrite
**
** Description      Send an NCI control message or data packet to the
**                  transport. If an NCI command message exceeds the transport
**                  size, HAL is responsible for fragmenting it, Data packets
**                  must be of the correct size.
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcWrite (UINT16 data_len, UINT8 *p_data)
{
    NFC_HDR *p_msg;
    UINT8 mt;

    NCI_TRACE_API0 ("HAL_NfcWrite ()");

    if (data_len > (NCI_MAX_CTRL_SIZE + NCI_MSG_HDR_SIZE))
    {
        NCI_TRACE_ERROR1 ("HAL_NfcWrite (): too many bytes (%d)", data_len);
        return;
    }

    /* Send message to NFC_HAL_TASK */
    if ((p_msg = (NFC_HDR *)GKI_getpoolbuf (NFC_HAL_NCI_POOL_ID)) != NULL)
    {
        p_msg->event  = NFC_HAL_EVT_TO_NFC_NCI;
        p_msg->offset = NFC_HAL_NCI_MSG_OFFSET_SIZE;
        p_msg->len    = data_len;
        memcpy ((UINT8 *)(p_msg+1) + p_msg->offset, p_data, data_len);

        /* Check if message is a command or data */
        mt = (*(p_data) & NCI_MT_MASK) >> NCI_MT_SHIFT;
        p_msg->layer_specific = (mt == NCI_MT_CMD) ? NFC_HAL_WAIT_RSP_CMD : 0;


        GKI_send_msg (NFC_HAL_TASK, NFC_HAL_TASK_MBOX, p_msg);
    }
}

/*******************************************************************************
**
** Function         HAL_NfcPreDiscover
**
** Description      Perform any vendor-specific pre-discovery actions (if needed)
**                  If any actions were performed TRUE will be returned, and
**                  HAL_PRE_DISCOVER_DONE_EVENT will notify when actions are
**                  completed.
**
** Returns          TRUE if vendor-specific pre-discovery actions initialized
**                  FALSE if no vendor-specific pre-discovery actions are needed.
**
*******************************************************************************/
BOOLEAN HAL_NfcPreDiscover (void)
{
    BOOLEAN status = FALSE;

    NCI_TRACE_API1 ("HAL_NfcPreDiscover status:%d", status);
    return status;
}

/*******************************************************************************
**
** Function         HAL_NfcControlGranted
**
** Description      Grant control to HAL control for sending NCI commands.
**
**                  Call in response to HAL_REQUEST_CONTROL_EVENT.
**
**                  Must only be called when there are no NCI commands pending.
**
**                  HAL_RELEASE_CONTROL_EVENT will notify when HAL no longer
**                  needs control of NCI.
**
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcControlGranted (void)
{
    NFC_HDR *p_msg;
    NCI_TRACE_API0 ("HAL_NfcControlGranted ()");

    /* Send message to NFC_HAL_TASK */
    if ((p_msg = (NFC_HDR *)GKI_getpoolbuf (NFC_HAL_NCI_POOL_ID)) != NULL)
    {
        p_msg->event  = NFC_HAL_EVT_CONTROL_GRANTED;
        GKI_send_msg (NFC_HAL_TASK, NFC_HAL_TASK_MBOX, p_msg);
    }
}

/*******************************************************************************
**
** Function         HAL_NfcPowerCycle
**
** Description      Restart NFCC by power cyle
**
**                  HAL_OPEN_CPLT_EVT will notify when operation is complete.
**
** Returns          void
**
*******************************************************************************/
void HAL_NfcPowerCycle (void)
{
    NCI_TRACE_API0 ("HAL_NfcPowerCycle ()");

    /* Only handle if HAL is opened (stack cback is not-NULL) */
    if (nfc_hal_cb.p_stack_cback)
    {
        /* Send power cycle event to NFC_HAL_TASK */
        GKI_send_event (NFC_HAL_TASK, NFC_HAL_TASK_EVT_POWER_CYCLE);
    }
}