| /****************************************************************************** |
| * |
| * Copyright (C) 2010-2014 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| |
| /****************************************************************************** |
| * |
| * This is the public interface file for NFA SNEP, Broadcom's NFC |
| * application layer for mobile phones. |
| * |
| ******************************************************************************/ |
| #ifndef NFA_SNEP_API_H |
| #define NFA_SNEP_API_H |
| |
| #include "nfa_api.h" |
| |
| /***************************************************************************** |
| ** Constants and data types |
| *****************************************************************************/ |
| #define NFA_SNEP_VERSION 0x10 /* SNEP Version 1.0 */ |
| |
| #define NFA_SNEP_REQ_CODE_CONTINUE 0x00 /* send remaining fragments */ |
| #define NFA_SNEP_REQ_CODE_GET 0x01 /* return an NDEF message */ |
| #define NFA_SNEP_REQ_CODE_PUT 0x02 /* accept an NDEF message */ |
| #define NFA_SNEP_REQ_CODE_REJECT 0x7F /* do not send remaining fragments */ |
| |
| #define tNFA_SNEP_REQ_CODE UINT8 |
| |
| #define NFA_SNEP_RESP_CODE_CONTINUE 0x80 /* continue send remaining fragments */ |
| #define NFA_SNEP_RESP_CODE_SUCCESS 0x81 /* the operation succeeded */ |
| #define NFA_SNEP_RESP_CODE_NOT_FOUND 0xC0 /* resource not found */ |
| #define NFA_SNEP_RESP_CODE_EXCESS_DATA 0xC1 /* resource exceeds data size limit */ |
| #define NFA_SNEP_RESP_CODE_BAD_REQ 0xC2 /* malformed request not understood */ |
| #define NFA_SNEP_RESP_CODE_NOT_IMPLM 0xE0 /* unsupported functionality requested */ |
| #define NFA_SNEP_RESP_CODE_UNSUPP_VER 0xE1 /* unsupported protocol version */ |
| #define NFA_SNEP_RESP_CODE_REJECT 0xFF /* do not send remaining fragments */ |
| |
| #define tNFA_SNEP_RESP_CODE UINT8 |
| |
| /* NFA SNEP callback events */ |
| #define NFA_SNEP_REG_EVT 0x00 /* Server/client Registeration Status */ |
| #define NFA_SNEP_ACTIVATED_EVT 0x01 /* LLCP link has been activated, client only */ |
| #define NFA_SNEP_DEACTIVATED_EVT 0x02 /* LLCP link has been deactivated, client only */ |
| #define NFA_SNEP_CONNECTED_EVT 0x03 /* Data link has been created */ |
| #define NFA_SNEP_GET_REQ_EVT 0x04 /* GET request from client */ |
| #define NFA_SNEP_PUT_REQ_EVT 0x05 /* PUT request from client */ |
| #define NFA_SNEP_GET_RESP_EVT 0x06 /* GET response from server */ |
| #define NFA_SNEP_PUT_RESP_EVT 0x07 /* PUT response from server */ |
| #define NFA_SNEP_DISC_EVT 0x08 /* Failed to connect or disconnected */ |
| |
| #define NFA_SNEP_ALLOC_BUFF_EVT 0x09 /* Request to allocate a buffer for NDEF*/ |
| #define NFA_SNEP_FREE_BUFF_EVT 0x0A /* Request to deallocate buffer for NDEF*/ |
| #define NFA_SNEP_GET_RESP_CMPL_EVT 0x0B /* GET response sent to client */ |
| |
| #define NFA_SNEP_DEFAULT_SERVER_STARTED_EVT 0x0C /* SNEP default server is started */ |
| #define NFA_SNEP_DEFAULT_SERVER_STOPPED_EVT 0x0D /* SNEP default server is stopped */ |
| |
| typedef UINT8 tNFA_SNEP_EVT; |
| |
| #define NFA_SNEP_ANY_SAP LLCP_INVALID_SAP |
| |
| /* Data for NFA_SNEP_REG_EVT */ |
| typedef struct |
| { |
| tNFA_STATUS status; |
| tNFA_HANDLE reg_handle; /* handle for registered server/client */ |
| char service_name[LLCP_MAX_SN_LEN + 1]; /* only for server */ |
| } tNFA_SNEP_REG; |
| |
| /* Data for NFA_SNEP_ACTIVATED_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE client_handle; /* handle for registered client */ |
| } tNFA_SNEP_ACTIVATED; |
| |
| /* Data for NFA_SNEP_DEACTIVATED_EVT */ |
| typedef tNFA_SNEP_ACTIVATED tNFA_SNEP_DEACTIVATED; |
| |
| /* Data for NFA_SNEP_CONNECTED_EVT */ |
| /* |
| ** for server, new handle will be assigned for conn_handle |
| ** for client, handle used in NFA_SnepConnect () is returned in conn_handle |
| */ |
| typedef struct |
| { |
| tNFA_HANDLE reg_handle; /* server/client handle */ |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| } tNFA_SNEP_CONNECT; |
| |
| /* Data for NFA_SNEP_GET_REQ_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| UINT32 acceptable_length; /* acceptable length from client */ |
| UINT32 ndef_length; /* NDEF message length */ |
| UINT8 *p_ndef; /* NDEF message */ |
| } tNFA_SNEP_GET_REQ; |
| |
| /* Data for NFA_SNEP_PUT_REQ_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| UINT32 ndef_length; /* NDEF message length */ |
| UINT8 *p_ndef; /* NDEF message */ |
| } tNFA_SNEP_PUT_REQ; |
| |
| /* Data for NFA_SNEP_GET_RESP_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| tNFA_SNEP_RESP_CODE resp_code; /* response code from server */ |
| UINT32 ndef_length; /* NDEF message length */ |
| UINT8 *p_ndef; /* NDEF message */ |
| } tNFA_SNEP_GET_RESP; |
| |
| /* Data for NFA_SNEP_PUT_RESP_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| tNFA_SNEP_RESP_CODE resp_code; /* response code from server */ |
| } tNFA_SNEP_PUT_RESP; |
| |
| /* Data for NFA_SNEP_DISC_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| /* client_handle if connection failed */ |
| } tNFA_SNEP_DISC; |
| |
| /* Data for NFA_SNEP_ALLOC_BUFF_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| tNFA_SNEP_REQ_CODE req_code; /* NFA_SNEP_REQ_CODE_GET or NFA_SNEP_REQ_CODE_PUT */ |
| tNFA_SNEP_RESP_CODE resp_code; /* Response code if cannot allocate buffer */ |
| UINT32 ndef_length; /* NDEF message length */ |
| UINT8 *p_buff; /* buffer for NDEF message */ |
| } tNFA_SNEP_ALLOC; |
| |
| /* Data for NFA_SNEP_FREE_BUFF_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| UINT8 *p_buff; /* buffer to free */ |
| } tNFA_SNEP_FREE; |
| |
| /* Data for NFA_SNEP_GET_RESP_CMPL_EVT */ |
| typedef struct |
| { |
| tNFA_HANDLE conn_handle; /* handle for data link connection */ |
| UINT8 *p_buff; /* buffer for NDEF message */ |
| } tNFA_SNEP_GET_RESP_CMPL; |
| |
| /* Union of all SNEP callback structures */ |
| typedef union |
| { |
| tNFA_SNEP_REG reg; /* NFA_SNEP_REG_EVT */ |
| tNFA_SNEP_ACTIVATED activated; /* NFA_SNEP_ACTIVATED_EVT */ |
| tNFA_SNEP_DEACTIVATED deactivated; /* NFA_SNEP_DEACTIVATED_EVT */ |
| tNFA_SNEP_CONNECT connect; /* NFA_SNEP_CONNECTED_EVT */ |
| tNFA_SNEP_GET_REQ get_req; /* NFA_SNEP_GET_REQ_EVT */ |
| tNFA_SNEP_PUT_REQ put_req; /* NFA_SNEP_PUT_REQ_EVT */ |
| tNFA_SNEP_GET_RESP get_resp; /* NFA_SNEP_GET_RESP_EVT */ |
| tNFA_SNEP_PUT_RESP put_resp; /* NFA_SNEP_PUT_RESP_EVT */ |
| tNFA_SNEP_DISC disc; /* NFA_SNEP_DISC_EVT */ |
| tNFA_SNEP_ALLOC alloc; /* NFA_SNEP_ALLOC_BUFF_EVT */ |
| tNFA_SNEP_FREE free; /* NFA_SNEP_FREE_BUFF_EVT */ |
| tNFA_SNEP_GET_RESP_CMPL get_resp_cmpl; /* NFA_SNEP_GET_RESP_CMPL_EVT */ |
| } tNFA_SNEP_EVT_DATA; |
| |
| /* NFA SNEP callback */ |
| typedef void (tNFA_SNEP_CBACK) (tNFA_SNEP_EVT event, tNFA_SNEP_EVT_DATA *p_data); |
| |
| /***************************************************************************** |
| ** External Function Declarations |
| *****************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepStartDefaultServer |
| ** |
| ** Description This function is called to listen to SAP, 0x04 as SNEP default |
| ** server ("urn:nfc:sn:snep") on LLCP. |
| ** |
| ** NFA_SNEP_DEFAULT_SERVER_STARTED_EVT without data will be returned. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepStartDefaultServer (tNFA_SNEP_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepStopDefaultServer |
| ** |
| ** Description This function is called to stop SNEP default server on LLCP. |
| ** |
| ** NFA_SNEP_DEFAULT_SERVER_STOPPED_EVT without data will be returned. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepStopDefaultServer (tNFA_SNEP_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepRegisterServer |
| ** |
| ** Description This function is called to listen to a SAP as SNEP server. |
| ** |
| ** If server_sap is set to NFA_SNEP_ANY_SAP, then NFA will allocate |
| ** a SAP between LLCP_LOWER_BOUND_SDP_SAP and LLCP_UPPER_BOUND_SDP_SAP |
| ** |
| ** NFC Forum default SNEP server ("urn:nfc:sn:snep") may be launched |
| ** by NFA_SnepStartDefaultServer (). |
| ** |
| ** NFA_SNEP_REG_EVT will be returned with status, handle and service name. |
| ** |
| ** Note: If RF discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_INVALID_PARAM if p_service_name or p_cback is NULL |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepRegisterServer (UINT8 server_sap, |
| char *p_service_name, |
| tNFA_SNEP_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepRegisterClient |
| ** |
| ** Description This function is called to register SNEP client. |
| ** NFA_SNEP_REG_EVT will be returned with status, handle |
| ** and zero-length service name. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_INVALID_PARAM if p_cback is NULL |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepRegisterClient (tNFA_SNEP_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepDeregister |
| ** |
| ** Description This function is called to stop listening as SNEP server |
| ** or SNEP client. Application shall use reg_handle returned in |
| ** NFA_SNEP_REG_EVT. |
| ** |
| ** Note: If this function is called to de-register a SNEP server and RF |
| ** discovery is started, NFA_StopRfDiscovery()/NFA_RF_DISCOVERY_STOPPED_EVT |
| ** should happen before calling this function |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepDeregister (tNFA_HANDLE reg_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepConnect |
| ** |
| ** Description This function is called by client to create data link connection |
| ** to SNEP server on peer device. |
| ** |
| ** Client handle and service name of server to connect shall be provided. |
| ** A conn_handle will be returned in NFA_SNEP_CONNECTED_EVT, if |
| ** successfully connected. Otherwise NFA_SNEP_DISC_EVT will be returned. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_INVALID_PARAM if p_service_name or p_cback is NULL |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepConnect (tNFA_HANDLE client_handle, |
| char *p_service_name); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepGet |
| ** |
| ** Description This function is called by client to send GET request. |
| ** |
| ** Application shall allocate a buffer and put NDEF message with |
| ** desired record type to get from server. NDEF message from server |
| ** will be returned in the same buffer with NFA_SNEP_GET_RESP_EVT. |
| ** The size of buffer will be used as "Acceptable Length". |
| ** |
| ** NFA_SNEP_GET_RESP_EVT or NFA_SNEP_DISC_EVT will be returned |
| ** through registered p_cback. Application may free the buffer |
| ** after receiving these events. |
| ** |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepGet (tNFA_HANDLE conn_handle, |
| UINT32 buff_length, |
| UINT32 ndef_length, |
| UINT8 *p_ndef_buff); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepPut |
| ** |
| ** Description This function is called by client to send PUT request. |
| ** |
| ** Application shall allocate a buffer and put desired NDEF message |
| ** to send to server. |
| ** |
| ** NFA_SNEP_PUT_RESP_EVT or NFA_SNEP_DISC_EVT will be returned |
| ** through p_cback. Application may free the buffer after receiving |
| ** these events. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_INVALID_PARAM if p_service_name or p_cback is NULL |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepPut (tNFA_HANDLE conn_handle, |
| UINT32 ndef_length, |
| UINT8 *p_ndef_buff); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepGetResponse |
| ** |
| ** Description This function is called by server to send response of GET request. |
| ** |
| ** When server application receives NFA_SNEP_ALLOC_BUFF_EVT, |
| ** it shall allocate a buffer for incoming NDEF message and |
| ** pass the pointer within callback context. This buffer will be |
| ** returned with NFA_SNEP_GET_REQ_EVT after receiving complete |
| ** NDEF message. If buffer is not allocated, NFA_SNEP_RESP_CODE_NOT_FOUND |
| ** (Note:There is no proper response code for this case) |
| ** or NFA_SNEP_RESP_CODE_REJECT will be sent to client. |
| ** |
| ** Server application shall provide conn_handle which is received in |
| ** NFA_SNEP_GET_REQ_EVT. |
| ** |
| ** Server application shall allocate a buffer and put NDEF message if |
| ** response code is NFA_SNEP_RESP_CODE_SUCCESS. Otherwise, ndef_length |
| ** shall be set to zero. |
| ** |
| ** NFA_SNEP_GET_RESP_CMPL_EVT or NFA_SNEP_DISC_EVT will be returned |
| ** through registered callback function. Application may free |
| ** the buffer after receiving these events. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepGetResponse (tNFA_HANDLE conn_handle, |
| tNFA_SNEP_RESP_CODE resp_code, |
| UINT32 ndef_length, |
| UINT8 *p_ndef_buff); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepPutResponse |
| ** |
| ** Description This function is called by server to send response of PUT request. |
| ** |
| ** When server application receives NFA_SNEP_ALLOC_BUFF_EVT, |
| ** it shall allocate a buffer for incoming NDEF message and |
| ** pass the pointer within callback context. This buffer will be |
| ** returned with NFA_SNEP_PUT_REQ_EVT after receiving complete |
| ** NDEF message. If buffer is not allocated, NFA_SNEP_RESP_CODE_REJECT |
| ** will be sent to client or NFA will discard request and send |
| ** NFA_SNEP_RESP_CODE_SUCCESS (Note:There is no proper response code for |
| ** this case). |
| ** |
| ** Server application shall provide conn_handle which is received in |
| ** NFA_SNEP_PUT_REQ_EVT. |
| ** |
| ** NFA_SNEP_DISC_EVT will be returned through registered callback |
| ** function when client disconnects data link connection. |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepPutResponse (tNFA_HANDLE conn_handle, |
| tNFA_SNEP_RESP_CODE resp_code); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepDisconnect |
| ** |
| ** Description This function is called to disconnect data link connection. |
| ** discard any pending data if flush is set to TRUE |
| ** |
| ** Client application shall provide conn_handle in NFA_SNEP_GET_RESP_EVT |
| ** or NFA_SNEP_PUT_RESP_EVT. |
| ** |
| ** Server application shall provide conn_handle in NFA_SNEP_GET_REQ_EVT |
| ** or NFA_SNEP_PUT_REQ_EVT. |
| ** |
| ** NFA_SNEP_DISC_EVT will be returned |
| ** |
| ** Returns NFA_STATUS_OK if successfully initiated |
| ** NFA_STATUS_BAD_HANDLE if handle is not valid |
| ** NFA_STATUS_FAILED otherwise |
| ** |
| *******************************************************************************/ |
| NFC_API extern tNFA_STATUS NFA_SnepDisconnect (tNFA_HANDLE conn_handle, |
| BOOLEAN flush); |
| |
| /******************************************************************************* |
| ** |
| ** Function NFA_SnepSetTraceLevel |
| ** |
| ** Description This function sets the trace level for SNEP. If called with |
| ** a value of 0xFF, it simply returns the current trace level. |
| ** |
| ** Returns The new or current trace level |
| ** |
| *******************************************************************************/ |
| NFC_API extern UINT8 NFA_SnepSetTraceLevel (UINT8 new_level); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* NFA_P2P_API_H */ |
| |