| CHANGES-1.3.txt |
| --------------- |
| |
| CHANGES IN CUPS V1.3.4 |
| |
| - Updated the Japanese localization (STR #2546) |
| - The parallel backend now gets the current IEEE-1284 |
| device ID string on Linux (STR #2553) |
| - The IPP backend now checks the job status at |
| variable intervals (from 1 to 10 seconds) instead |
| of every 10 seconds for faster remote printing |
| (STR #2548) |
| - "lpr -p" and "lpr -l" did not work (STR #2544) |
| - Compilation failed when a previous version of CUPS |
| was installed and was included in the SSL include |
| path (STR #2538) |
| - The scheduler did not reject requests with charsets |
| other than US-ASCII or UTF-8, and the CUPS API |
| incorrectly passed the locale charset to the scheduler |
| instead of UTF-8 (STR #2537) |
| - cups-deviced did not filter out duplicate devices. |
| - The AppleTalk backend incorrectly added a scheme |
| listing when AppleTalk was disabled or no printers |
| were found. |
| - The PostScript filter generated N^2 copies when the |
| printer supported collated copies and user requested |
| reverse-order output. |
| - The scheduler did not reprint all of the files in a |
| job that was held. |
| - The scheduler did not update the printcap file after |
| removing stale remote queues. |
| - The cupsd.conf man page incorrectly referenced |
| "AuthType Kerberos" instead of "AuthType Negotiate". |
| |
| |
| CHANGES IN CUPS V1.3.3 |
| |
| - The scheduler did not use the attributes-natural-language |
| attribute when passing the LANG environment variable to |
| cups-deviced or cups-driverd. |
| - The scheduler did not use the printer-op-policy when |
| modifying classes or printers (STR #2525) |
| - The auth-info-required attribute was not always updated |
| for remote queues that required authentication. |
| - The German web interface localization contained errors |
| (STR #2523) |
| - The Swedish localization contained errors (STR #2522) |
| |
| |
| CHANGES IN CUPS V1.3.2 |
| |
| - The 1.3.1 release was incorrectly created from the |
| 1.4.x source tree (STR #2519) |
| - Added support for 32/64-bit libraries on HP-UX |
| (STR #2520) |
| - The scheduler incorrectly used portrait as the default |
| orientation (STR #2513) |
| - The scheduler no longer writes the printcap file for |
| every remote printer update (STR #2512) |
| - Remote raw printing with multiple copies did not work |
| (STR #2518) |
| - Updated the configure script to require at least autoconf |
| 2.60 (STR #2515) |
| - Some gzip'd PPD files were not read in their entirety |
| (STR #2510) |
| |
| |
| CHANGES IN CUPS V1.3.1 |
| |
| - Documentation updates. |
| - The USB backend on Mac OS X could hang if the driver and |
| printer did not match. |
| - Delegated Kerberos credentials were not working. |
| - "make distclean" incorrectly removed the edit-config.tmpl |
| files (STR #2508) |
| - Fix compile problem on HP-UX (STR #2501) |
| - The cupstestppd utility now tests for resolutions greater |
| than 99999 DPI to detect a missing "x" between the X and Y |
| resolutions. |
| - Fixed many problems in the various translations and added |
| a new "checkpo" utility to validate them. |
| - The cupstestppd utility now tests the custom page size code |
| for CUPS raster drivers. |
| - cupsLangDefault() did not attempt to return a language that |
| was supported by the calling application. |
| - If a remote printer stopped while a job was being sent, the |
| local queue would also get stopped and the job re-queued, |
| resulting in duplicate prints in some cases. |
| - A few Apple-specific job options needed to be omitted when |
| printing a banner page. |
| - The new peer credential support did not compile on FreeBSD |
| (STR #2495) |
| - Direct links to help files did not set the current section |
| so the table-of-contents was not shown. |
| - The configure script did not support --localedir=foo (STR #2488) |
| - The backends were not displaying their localized messages. |
| - CUPS-Authenticate-Job did not require Kerberos authentication |
| on queues protected by Kerberos. |
| - The Zebra ZPL driver did not work with Brady label printers |
| (STR #2487) |
| - Norwegian wasn't localized on Mac OS X. |
| - getnameinfo() returns an error on some systems when DNS is |
| not available, leading to numerous problems (STR #2486) |
| - The cupsfilter command did not work properly on Mac OS X. |
| - The scheduler makefile contained a typo (STR #2483) |
| - The TBCP and BCP port monitors did not handle the trailing |
| CTRL-D in some PostScript output properly. |
| - Fixed the localization instructions and German template for |
| the "Find New Printers" button (STR #2478) |
| - The web interface did not work with the Chinese localization |
| (STR #2477) |
| - The web interface home page did not work for languages that |
| were only partially localized (STR #2472) |
| - Updated the Spanish web interface localization (STR #2473) |
| - ppdLocalize() did not work for country-specific localizations. |
| |
| |
| CHANGES IN CUPS V1.3.0 |
| |
| - The scheduler did not handle out-of-file conditions |
| gracefully when accepting new connections, leading to |
| heavy CPU usage. |
| - The scheduler did not detect ServerBin misconfigurations |
| (STR #2470) |
| - "AuthType Default" did not work as expected when the |
| "DefaultAuthType foo" line appeared after it in the |
| cupsd.conf file. |
| - The on-line help did not describe many common printing |
| options (STR #1846) |
| - The IPP backend did not return the "auth required" status |
| when printing to a Kerberos-protected queue. |
| - The scheduler was not looking in the correct directories |
| for LSB PPD files (STR #2464) |
| - Changed references to ESP Ghostscript to GPL Ghostscript |
| (STR #2463) |
| - The PostScript filter did not cleanly terminate when |
| the job was canceled or stopped. |
| - Fixed generation of Kerberos credentials for remote |
| printing. Note that this requires a recent version of |
| MIT Kerberos with a working krb5_cc_new_unique() |
| function or Heimdal Kerberos. |
| - Added Portuguese and updated Italian message catalogs. |
| |
| |
| CHANGES IN CUPS V1.3rc2 |
| |
| - Added more range checking to the pdftops filter. |
| - The scheduler would crash if a remote IPP queue was stopped |
| (STR #2460) |
| - The scheduler did not allow "DefaultAuthType None". |
| |
| |
| CHANGES IN CUPS V1.3rc1 |
| |
| - Updated the German localization (STR #2443) |
| - cupsAdminGetServerSettings() did not handle </Foo> properly. |
| - When lprm and cancel are run with no job ID, they now will |
| cancel the first stopped job if no pending or processing |
| jobs are left in the queue. |
| - The scheduler now logs successful print jobs, filter |
| failures, and the job file types at the default log |
| level (STR #2458) |
| - The scheduler now logs the usernames it is using for |
| authorization at LogLevel debug instead of debug2 (STR #2448) |
| - Added Intellitech Intellibar and Zebra CPCL PPDs to the list |
| of installed PPDs. |
| - Added 6" and 8" wide label sizes for the Zebra ZPL Label |
| Printer driver (STR #2442) |
| - The cupsaddsmb program and web interface now support |
| exporting of 64-bit Windows drivers, when available |
| (STR #2439) |
| - Moving a job that was printing did not stop the job on the |
| original printer (STR #2262) |
| - The cups-lpd mini-daemon did not work on Mac OS X server. |
| - Added httpGetAuthString() and httpSetAuthString() APIs to get |
| and set the current (cached) authorization string to use for |
| HTTP requests. |
| - Updated the default cupsd.conf policy to list the |
| "administrative" operations separately from the "printer |
| control" operations so that it is easier to define a |
| group of users that are "printer operators". |
| - The web interface now pulls the default cupsd.conf file |
| from cupsd.conf.default in the CUPS config directory. |
| - Added a help file for using Kerberos with CUPS. |
| - The scheduler now strips the "@KDC" portion of Kerberos |
| usernames since those usernames typically do not appear in |
| the group membership lists used by CUPS. |
| - cupsMarkOptions() could (incorrectly) leave multiple option |
| choices marked. |
| - Backends could (incorrectly) run as root during discovery |
| (STR #2454) |
| - Avahi is now supported for DNS-SD (Bonjour) printer sharing |
| (STR #2455) |
| - The default cupsd.conf file had typos and old operation names |
| (STR #2450) |
| - The scheduler now erases authentication cache files using the |
| 7-pass US DoD algorithm. |
| - Delegated Kerberos credentials (proxy authentication) did not |
| work. |
| - The filter makefile did not optimize the libcupsimage.2.dylib |
| with a sectorder file. |
| - The IPP backend incorrectly wrote an empty printer message |
| when processing the "none" state reason. |
| - The USB backend could deadlock on Mac OS X while performing |
| a side-channel command. |
| - The scheduler did not prevent remote queues from being |
| shared/published. |
| - The scheduler did not remove the temporary request file on |
| authentication errors. |
| - ppdLocalizeIPPReason() did not handle "scheme:" schemes or |
| "file" URLs. |
| - ppdLocalizeIPPReason() was not exported on Mac OS X. |
| |
| |
| CHANGES IN CUPS V1.3b1 |
| |
| - Copyright updates - CUPS is now owned by Apple Inc. |
| - Documentation updates (STR #1775, STR #2027, STR #2130, |
| STR #2131, STR #2263, STR #2356, STR #2397) |
| - Added new cupsfilter utility (STR #1734) |
| - Added new job-printer-state-message and |
| job-printer-state-reasons attributes to jobs (STR #2418) |
| - Added LDAP+SSL support (STR #1967) |
| - CUPS now supports authentication via peer credentials |
| over domain sockets (STR #2242, STR #2277) |
| - The CUPS sample driver PPDs are now generated by the PPD |
| compiler and include all of the localized languages by |
| default (STR #2164) |
| - You can now specify "AuthType Default" in the cupsd.conf |
| file to use the default authentication defined by the |
| DefaultAuthType directive. |
| - The SNMP backend no longer adds a default Address line |
| when none is specified in the snmp.conf file; this allows |
| the backend to be easily disabled as needed (STR #2434) |
| - Added a new cupsctl command for doing basic changes to |
| the cupsd.conf file (STR #1777) |
| - Added a new ppdLocalizeIPPReason() function to get the |
| localized text/URI for a given IPP reason keyword for a |
| driver. |
| - Removed the deskjet2.ppd driver, as it only worked with |
| a very small subset of HP DeskJet printers and was |
| confusing to users. The rastertohp driver still |
| supports the deskjet2.ppd options for existing queues. |
| - The scheduler did not add a trailing banner page if a |
| client did not specify the last document in a job (STR |
| #1711) |
| - The scheduler did not report Bonjour shared printers as |
| remote printers (STR #2384) |
| - Added new -R and -W options to the cupstestppd program |
| for greater control over the testing of PPDs. |
| - Added a new cupsGetServerPPD() function for getting |
| an available PPD from the server (STR #2334) |
| - Added a new cupsDoIORequest() function for reading |
| and writing files via IPP requests (STR #2334) |
| - Added a new CUPS_GET_PPD operation for getting an |
| available PPD file on the server (STR #2334) |
| - CUPS_GET_PPDS now reports multiple ppd-product values |
| based on the PPD ModelName and Product strings (STR |
| #2334, STR #2383) |
| - CUPS_GET_PPDS now reports the PSVersion attributes |
| from a PPD file in the ppd-psversion attribute |
| (STR #2334) |
| - CUPS_GET_PPDS now reports the cupsModelNumber attribute |
| from a PPD file in the ppd-model-number attribute (STR |
| #2383) |
| - CUPS_GET_PPDS now reports a driver type string in the |
| ppd-type attribute based on the cupsFax and cupsFilter |
| attributes in a PPD file (STR #2383) |
| - Added a new printer attribute called "cups-version" |
| which reports the version of CUPS that is running |
| (STR #2240) |
| - backendRunLoop() now aborts immediately on SIGTERM |
| if no data has been written yet (STR #2103) |
| - Due to poor IPP support from the vendors, the SNMP |
| backend no longer tries IPP connections; instead, |
| it now uses a lookup file with fallback to port 9100 |
| (socket://address) and 515 (lpd://address) printing |
| (STR #2035, STR #2354) |
| - The scheduler now recreates the CUPS log directory as |
| needed (STR #2353) |
| - cupsLangDefault() now maps new-style Apple locale names |
| to the traditional ll_CC form (STR #2357) |
| - Add new cupsArrayNew2() API to support hashed lookups |
| of array elements (STR #2358) |
| - ppdConflicts() optimizations (STR #2358) |
| - The cupstestppd program now tests for existing filters, |
| icons, profiles, and dialog extensions (STR #2326) |
| - The web interface no longer lists new printers on the |
| main administration page. Instead, a new "List Available |
| Printers" button is provided that shows a separate page |
| with the list of printers. |
| - The web interface now supports setting the banner and |
| policy options on raw printers and classes (STR #2238) |
| - The socket backend now reads any pending back-channel |
| data before shutting down the socket (STR #2325) |
| - Added a new ErrorPolicy directive in the cupsd.conf |
| file (STR #1871) |
| - Printers that use JCL options are now exported to Samba |
| correctly (STR #1985) |
| - The IPP backend now relays printer-state-message values |
| from the server to the client (STR #2109) |
| - Added support for the PWG printer-alert and |
| printer-alert-description attributes (STR #2088) |
| - Added support for LPD "stream" mode (STR #2036) |
| - The scheduler now reports the PostScript product string |
| from PPD files in CUPS-Get-PPDs responses (STR #1900) |
| - Raw printing with queues pointing to the file pseudo- |
| device and multiple files and/or banners now works (STR |
| #1933) |
| - Added new public cupsAdminGetServerSettings() and |
| cupsAdminSetServerSettings() APIs. |
| - Added new "makebuttons" script in the "tools" directory |
| for creating web interface buttons (STR #2231) |
| - Added support for DNS-SD (aka "Bonjour") printer sharing |
| (STR #1171) |
| - Job operations (cancel, hold, release, etc.) from the |
| web interface now return back to the original page (STR |
| #2239) |
| - The classes or printers list is now shown after a |
| successful deletion from the web interface (STR #1999) |
| - The default configuration now allows browse packets from |
| any address (STR #2008) |
| - The web interface now provides an "allow printing from the |
| Internet" check box (STR #1897) |
| - The notify-events-default and |
| notify-lease-duration-default attributes can now be set |
| (STR #1671) |
| - Server-side default options are now sent to clients when |
| the "printer-defaults" attribute group is requested (STR |
| #1923) |
| - Added support for Linux "relro" linker option (STR #1614) |
| - CUPS now validates the number-up option value (STR #1329) |
| - The on-line help now provides better search capabilities |
| (STR #1701) |
| - The web interface "Add This Printer" button now allows you |
| to change the printer name, description, and location |
| (STR #1646) |
| - Added support for Mac OS X authorization services |
| (STR #2206) |
| - Added support for driver-specific pre-filters (STR #2108) |
| - Added a new side-channel API for drivers and backends |
| for basic device control and information queries (STR |
| #1898) |
| - The scheduler now uses poll(), epoll(), or /dev/kqueue |
| instead of select() when possible (STR #1261) |
| - Added new cupsArrayGetIndex() and cupsArrayGetInsert() |
| functions to get the current index and insertion |
| positions of an array. |
| - Added a new --with-max-copies configure option (STR |
| #2090) |
| - Added new cupsRemoveDest() and cupsSetDefaultDest() |
| functions. |
| - Added support for cupsPJLCharset attribute in PPD files |
| which specifies the character set that is used in PJL |
| strings (STR #1969) |
| - Moved the definition of the (private) _http_s structure |
| to http-private.h; code that directly accesses the |
| http_t members will no longer compile! |
| - Added support for setting the document-format-default |
| attribute on a per-printer basis. |
| - Added support for IntelliBar label printers. |