| /* |
| * Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "precompiled.hpp" |
| #include "compiler/compileLog.hpp" |
| #include "compiler/oopMap.hpp" |
| #include "memory/allocation.inline.hpp" |
| #include "opto/addnode.hpp" |
| #include "opto/block.hpp" |
| #include "opto/callnode.hpp" |
| #include "opto/cfgnode.hpp" |
| #include "opto/chaitin.hpp" |
| #include "opto/coalesce.hpp" |
| #include "opto/connode.hpp" |
| #include "opto/idealGraphPrinter.hpp" |
| #include "opto/indexSet.hpp" |
| #include "opto/machnode.hpp" |
| #include "opto/memnode.hpp" |
| #include "opto/opcodes.hpp" |
| #include "opto/rootnode.hpp" |
| |
| #ifndef PRODUCT |
| void LRG::dump() const { |
| ttyLocker ttyl; |
| tty->print("%d ",num_regs()); |
| _mask.dump(); |
| if( _msize_valid ) { |
| if( mask_size() == compute_mask_size() ) tty->print(", #%d ",_mask_size); |
| else tty->print(", #!!!_%d_vs_%d ",_mask_size,_mask.Size()); |
| } else { |
| tty->print(", #?(%d) ",_mask.Size()); |
| } |
| |
| tty->print("EffDeg: "); |
| if( _degree_valid ) tty->print( "%d ", _eff_degree ); |
| else tty->print("? "); |
| |
| if( is_multidef() ) { |
| tty->print("MultiDef "); |
| if (_defs != NULL) { |
| tty->print("("); |
| for (int i = 0; i < _defs->length(); i++) { |
| tty->print("N%d ", _defs->at(i)->_idx); |
| } |
| tty->print(") "); |
| } |
| } |
| else if( _def == 0 ) tty->print("Dead "); |
| else tty->print("Def: N%d ",_def->_idx); |
| |
| tty->print("Cost:%4.2g Area:%4.2g Score:%4.2g ",_cost,_area, score()); |
| // Flags |
| if( _is_oop ) tty->print("Oop "); |
| if( _is_float ) tty->print("Float "); |
| if( _is_vector ) tty->print("Vector "); |
| if( _was_spilled1 ) tty->print("Spilled "); |
| if( _was_spilled2 ) tty->print("Spilled2 "); |
| if( _direct_conflict ) tty->print("Direct_conflict "); |
| if( _fat_proj ) tty->print("Fat "); |
| if( _was_lo ) tty->print("Lo "); |
| if( _has_copy ) tty->print("Copy "); |
| if( _at_risk ) tty->print("Risk "); |
| |
| if( _must_spill ) tty->print("Must_spill "); |
| if( _is_bound ) tty->print("Bound "); |
| if( _msize_valid ) { |
| if( _degree_valid && lo_degree() ) tty->print("Trivial "); |
| } |
| |
| tty->cr(); |
| } |
| #endif |
| |
| // Compute score from cost and area. Low score is best to spill. |
| static double raw_score( double cost, double area ) { |
| return cost - (area*RegisterCostAreaRatio) * 1.52588e-5; |
| } |
| |
| double LRG::score() const { |
| // Scale _area by RegisterCostAreaRatio/64K then subtract from cost. |
| // Bigger area lowers score, encourages spilling this live range. |
| // Bigger cost raise score, prevents spilling this live range. |
| // (Note: 1/65536 is the magic constant below; I dont trust the C optimizer |
| // to turn a divide by a constant into a multiply by the reciprical). |
| double score = raw_score( _cost, _area); |
| |
| // Account for area. Basically, LRGs covering large areas are better |
| // to spill because more other LRGs get freed up. |
| if( _area == 0.0 ) // No area? Then no progress to spill |
| return 1e35; |
| |
| if( _was_spilled2 ) // If spilled once before, we are unlikely |
| return score + 1e30; // to make progress again. |
| |
| if( _cost >= _area*3.0 ) // Tiny area relative to cost |
| return score + 1e17; // Probably no progress to spill |
| |
| if( (_cost+_cost) >= _area*3.0 ) // Small area relative to cost |
| return score + 1e10; // Likely no progress to spill |
| |
| return score; |
| } |
| |
| #define NUMBUCKS 3 |
| |
| // Straight out of Tarjan's union-find algorithm |
| uint LiveRangeMap::find_compress(uint lrg) { |
| uint cur = lrg; |
| uint next = _uf_map.at(cur); |
| while (next != cur) { // Scan chain of equivalences |
| assert( next < cur, "always union smaller"); |
| cur = next; // until find a fixed-point |
| next = _uf_map.at(cur); |
| } |
| |
| // Core of union-find algorithm: update chain of |
| // equivalences to be equal to the root. |
| while (lrg != next) { |
| uint tmp = _uf_map.at(lrg); |
| _uf_map.at_put(lrg, next); |
| lrg = tmp; |
| } |
| return lrg; |
| } |
| |
| // Reset the Union-Find map to identity |
| void LiveRangeMap::reset_uf_map(uint max_lrg_id) { |
| _max_lrg_id= max_lrg_id; |
| // Force the Union-Find mapping to be at least this large |
| _uf_map.at_put_grow(_max_lrg_id, 0); |
| // Initialize it to be the ID mapping. |
| for (uint i = 0; i < _max_lrg_id; ++i) { |
| _uf_map.at_put(i, i); |
| } |
| } |
| |
| // Make all Nodes map directly to their final live range; no need for |
| // the Union-Find mapping after this call. |
| void LiveRangeMap::compress_uf_map_for_nodes() { |
| // For all Nodes, compress mapping |
| uint unique = _names.length(); |
| for (uint i = 0; i < unique; ++i) { |
| uint lrg = _names.at(i); |
| uint compressed_lrg = find(lrg); |
| if (lrg != compressed_lrg) { |
| _names.at_put(i, compressed_lrg); |
| } |
| } |
| } |
| |
| // Like Find above, but no path compress, so bad asymptotic behavior |
| uint LiveRangeMap::find_const(uint lrg) const { |
| if (!lrg) { |
| return lrg; // Ignore the zero LRG |
| } |
| |
| // Off the end? This happens during debugging dumps when you got |
| // brand new live ranges but have not told the allocator yet. |
| if (lrg >= _max_lrg_id) { |
| return lrg; |
| } |
| |
| uint next = _uf_map.at(lrg); |
| while (next != lrg) { // Scan chain of equivalences |
| assert(next < lrg, "always union smaller"); |
| lrg = next; // until find a fixed-point |
| next = _uf_map.at(lrg); |
| } |
| return next; |
| } |
| |
| PhaseChaitin::PhaseChaitin(uint unique, PhaseCFG &cfg, Matcher &matcher) |
| : PhaseRegAlloc(unique, cfg, matcher, |
| #ifndef PRODUCT |
| print_chaitin_statistics |
| #else |
| NULL |
| #endif |
| ) |
| , _lrg_map(Thread::current()->resource_area(), unique) |
| , _live(0) |
| , _spilled_once(Thread::current()->resource_area()) |
| , _spilled_twice(Thread::current()->resource_area()) |
| , _lo_degree(0), _lo_stk_degree(0), _hi_degree(0), _simplified(0) |
| , _oldphi(unique) |
| #ifndef PRODUCT |
| , _trace_spilling(TraceSpilling || C->method_has_option("TraceSpilling")) |
| #endif |
| { |
| NOT_PRODUCT( Compile::TracePhase t3("ctorChaitin", &_t_ctorChaitin, TimeCompiler); ) |
| |
| _high_frequency_lrg = MIN2(float(OPTO_LRG_HIGH_FREQ), _cfg.get_outer_loop_frequency()); |
| |
| // Build a list of basic blocks, sorted by frequency |
| _blks = NEW_RESOURCE_ARRAY(Block *, _cfg.number_of_blocks()); |
| // Experiment with sorting strategies to speed compilation |
| double cutoff = BLOCK_FREQUENCY(1.0); // Cutoff for high frequency bucket |
| Block **buckets[NUMBUCKS]; // Array of buckets |
| uint buckcnt[NUMBUCKS]; // Array of bucket counters |
| double buckval[NUMBUCKS]; // Array of bucket value cutoffs |
| for (uint i = 0; i < NUMBUCKS; i++) { |
| buckets[i] = NEW_RESOURCE_ARRAY(Block *, _cfg.number_of_blocks()); |
| buckcnt[i] = 0; |
| // Bump by three orders of magnitude each time |
| cutoff *= 0.001; |
| buckval[i] = cutoff; |
| for (uint j = 0; j < _cfg.number_of_blocks(); j++) { |
| buckets[i][j] = NULL; |
| } |
| } |
| // Sort blocks into buckets |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| for (uint j = 0; j < NUMBUCKS; j++) { |
| if ((j == NUMBUCKS - 1) || (_cfg.get_block(i)->_freq > buckval[j])) { |
| // Assign block to end of list for appropriate bucket |
| buckets[j][buckcnt[j]++] = _cfg.get_block(i); |
| break; // kick out of inner loop |
| } |
| } |
| } |
| // Dump buckets into final block array |
| uint blkcnt = 0; |
| for (uint i = 0; i < NUMBUCKS; i++) { |
| for (uint j = 0; j < buckcnt[i]; j++) { |
| _blks[blkcnt++] = buckets[i][j]; |
| } |
| } |
| |
| assert(blkcnt == _cfg.number_of_blocks(), "Block array not totally filled"); |
| } |
| |
| // union 2 sets together. |
| void PhaseChaitin::Union( const Node *src_n, const Node *dst_n ) { |
| uint src = _lrg_map.find(src_n); |
| uint dst = _lrg_map.find(dst_n); |
| assert(src, ""); |
| assert(dst, ""); |
| assert(src < _lrg_map.max_lrg_id(), "oob"); |
| assert(dst < _lrg_map.max_lrg_id(), "oob"); |
| assert(src < dst, "always union smaller"); |
| _lrg_map.uf_map(dst, src); |
| } |
| |
| void PhaseChaitin::new_lrg(const Node *x, uint lrg) { |
| // Make the Node->LRG mapping |
| _lrg_map.extend(x->_idx,lrg); |
| // Make the Union-Find mapping an identity function |
| _lrg_map.uf_extend(lrg, lrg); |
| } |
| |
| |
| int PhaseChaitin::clone_projs(Block* b, uint idx, Node* orig, Node* copy, uint& max_lrg_id) { |
| assert(b->find_node(copy) == (idx - 1), "incorrect insert index for copy kill projections"); |
| DEBUG_ONLY( Block* borig = _cfg.get_block_for_node(orig); ) |
| int found_projs = 0; |
| uint cnt = orig->outcnt(); |
| for (uint i = 0; i < cnt; i++) { |
| Node* proj = orig->raw_out(i); |
| if (proj->is_MachProj()) { |
| assert(proj->outcnt() == 0, "only kill projections are expected here"); |
| assert(_cfg.get_block_for_node(proj) == borig, "incorrect block for kill projections"); |
| found_projs++; |
| // Copy kill projections after the cloned node |
| Node* kills = proj->clone(); |
| kills->set_req(0, copy); |
| b->insert_node(kills, idx++); |
| _cfg.map_node_to_block(kills, b); |
| new_lrg(kills, max_lrg_id++); |
| } |
| } |
| return found_projs; |
| } |
| |
| // Renumber the live ranges to compact them. Makes the IFG smaller. |
| void PhaseChaitin::compact() { |
| // Current the _uf_map contains a series of short chains which are headed |
| // by a self-cycle. All the chains run from big numbers to little numbers. |
| // The Find() call chases the chains & shortens them for the next Find call. |
| // We are going to change this structure slightly. Numbers above a moving |
| // wave 'i' are unchanged. Numbers below 'j' point directly to their |
| // compacted live range with no further chaining. There are no chains or |
| // cycles below 'i', so the Find call no longer works. |
| uint j=1; |
| uint i; |
| for (i = 1; i < _lrg_map.max_lrg_id(); i++) { |
| uint lr = _lrg_map.uf_live_range_id(i); |
| // Ignore unallocated live ranges |
| if (!lr) { |
| continue; |
| } |
| assert(lr <= i, ""); |
| _lrg_map.uf_map(i, ( lr == i ) ? j++ : _lrg_map.uf_live_range_id(lr)); |
| } |
| // Now change the Node->LR mapping to reflect the compacted names |
| uint unique = _lrg_map.size(); |
| for (i = 0; i < unique; i++) { |
| uint lrg_id = _lrg_map.live_range_id(i); |
| _lrg_map.map(i, _lrg_map.uf_live_range_id(lrg_id)); |
| } |
| |
| // Reset the Union-Find mapping |
| _lrg_map.reset_uf_map(j); |
| } |
| |
| void PhaseChaitin::Register_Allocate() { |
| |
| // Above the OLD FP (and in registers) are the incoming arguments. Stack |
| // slots in this area are called "arg_slots". Above the NEW FP (and in |
| // registers) is the outgoing argument area; above that is the spill/temp |
| // area. These are all "frame_slots". Arg_slots start at the zero |
| // stack_slots and count up to the known arg_size. Frame_slots start at |
| // the stack_slot #arg_size and go up. After allocation I map stack |
| // slots to actual offsets. Stack-slots in the arg_slot area are biased |
| // by the frame_size; stack-slots in the frame_slot area are biased by 0. |
| |
| _trip_cnt = 0; |
| _alternate = 0; |
| _matcher._allocation_started = true; |
| |
| ResourceArea split_arena; // Arena for Split local resources |
| ResourceArea live_arena; // Arena for liveness & IFG info |
| ResourceMark rm(&live_arena); |
| |
| // Need live-ness for the IFG; need the IFG for coalescing. If the |
| // liveness is JUST for coalescing, then I can get some mileage by renaming |
| // all copy-related live ranges low and then using the max copy-related |
| // live range as a cut-off for LIVE and the IFG. In other words, I can |
| // build a subset of LIVE and IFG just for copies. |
| PhaseLive live(_cfg, _lrg_map.names(), &live_arena); |
| |
| // Need IFG for coalescing and coloring |
| PhaseIFG ifg(&live_arena); |
| _ifg = &ifg; |
| |
| // Come out of SSA world to the Named world. Assign (virtual) registers to |
| // Nodes. Use the same register for all inputs and the output of PhiNodes |
| // - effectively ending SSA form. This requires either coalescing live |
| // ranges or inserting copies. For the moment, we insert "virtual copies" |
| // - we pretend there is a copy prior to each Phi in predecessor blocks. |
| // We will attempt to coalesce such "virtual copies" before we manifest |
| // them for real. |
| de_ssa(); |
| |
| #ifdef ASSERT |
| // Veify the graph before RA. |
| verify(&live_arena); |
| #endif |
| |
| { |
| NOT_PRODUCT( Compile::TracePhase t3("computeLive", &_t_computeLive, TimeCompiler); ) |
| _live = NULL; // Mark live as being not available |
| rm.reset_to_mark(); // Reclaim working storage |
| IndexSet::reset_memory(C, &live_arena); |
| ifg.init(_lrg_map.max_lrg_id()); // Empty IFG |
| gather_lrg_masks( false ); // Collect LRG masks |
| live.compute(_lrg_map.max_lrg_id()); // Compute liveness |
| _live = &live; // Mark LIVE as being available |
| } |
| |
| // Base pointers are currently "used" by instructions which define new |
| // derived pointers. This makes base pointers live up to the where the |
| // derived pointer is made, but not beyond. Really, they need to be live |
| // across any GC point where the derived value is live. So this code looks |
| // at all the GC points, and "stretches" the live range of any base pointer |
| // to the GC point. |
| if (stretch_base_pointer_live_ranges(&live_arena)) { |
| NOT_PRODUCT(Compile::TracePhase t3("computeLive (sbplr)", &_t_computeLive, TimeCompiler);) |
| // Since some live range stretched, I need to recompute live |
| _live = NULL; |
| rm.reset_to_mark(); // Reclaim working storage |
| IndexSet::reset_memory(C, &live_arena); |
| ifg.init(_lrg_map.max_lrg_id()); |
| gather_lrg_masks(false); |
| live.compute(_lrg_map.max_lrg_id()); |
| _live = &live; |
| } |
| // Create the interference graph using virtual copies |
| build_ifg_virtual(); // Include stack slots this time |
| |
| // Aggressive (but pessimistic) copy coalescing. |
| // This pass works on virtual copies. Any virtual copies which are not |
| // coalesced get manifested as actual copies |
| { |
| // The IFG is/was triangular. I am 'squaring it up' so Union can run |
| // faster. Union requires a 'for all' operation which is slow on the |
| // triangular adjacency matrix (quick reminder: the IFG is 'sparse' - |
| // meaning I can visit all the Nodes neighbors less than a Node in time |
| // O(# of neighbors), but I have to visit all the Nodes greater than a |
| // given Node and search them for an instance, i.e., time O(#MaxLRG)). |
| _ifg->SquareUp(); |
| |
| PhaseAggressiveCoalesce coalesce(*this); |
| coalesce.coalesce_driver(); |
| // Insert un-coalesced copies. Visit all Phis. Where inputs to a Phi do |
| // not match the Phi itself, insert a copy. |
| coalesce.insert_copies(_matcher); |
| if (C->failing()) { |
| return; |
| } |
| } |
| |
| // After aggressive coalesce, attempt a first cut at coloring. |
| // To color, we need the IFG and for that we need LIVE. |
| { |
| NOT_PRODUCT( Compile::TracePhase t3("computeLive", &_t_computeLive, TimeCompiler); ) |
| _live = NULL; |
| rm.reset_to_mark(); // Reclaim working storage |
| IndexSet::reset_memory(C, &live_arena); |
| ifg.init(_lrg_map.max_lrg_id()); |
| gather_lrg_masks( true ); |
| live.compute(_lrg_map.max_lrg_id()); |
| _live = &live; |
| } |
| |
| // Build physical interference graph |
| uint must_spill = 0; |
| must_spill = build_ifg_physical(&live_arena); |
| // If we have a guaranteed spill, might as well spill now |
| if (must_spill) { |
| if(!_lrg_map.max_lrg_id()) { |
| return; |
| } |
| // Bail out if unique gets too large (ie - unique > MaxNodeLimit) |
| C->check_node_count(10*must_spill, "out of nodes before split"); |
| if (C->failing()) { |
| return; |
| } |
| |
| uint new_max_lrg_id = Split(_lrg_map.max_lrg_id(), &split_arena); // Split spilling LRG everywhere |
| _lrg_map.set_max_lrg_id(new_max_lrg_id); |
| // Bail out if unique gets too large (ie - unique > MaxNodeLimit - 2*NodeLimitFudgeFactor) |
| // or we failed to split |
| C->check_node_count(2*NodeLimitFudgeFactor, "out of nodes after physical split"); |
| if (C->failing()) { |
| return; |
| } |
| |
| NOT_PRODUCT(C->verify_graph_edges();) |
| |
| compact(); // Compact LRGs; return new lower max lrg |
| |
| { |
| NOT_PRODUCT( Compile::TracePhase t3("computeLive", &_t_computeLive, TimeCompiler); ) |
| _live = NULL; |
| rm.reset_to_mark(); // Reclaim working storage |
| IndexSet::reset_memory(C, &live_arena); |
| ifg.init(_lrg_map.max_lrg_id()); // Build a new interference graph |
| gather_lrg_masks( true ); // Collect intersect mask |
| live.compute(_lrg_map.max_lrg_id()); // Compute LIVE |
| _live = &live; |
| } |
| build_ifg_physical(&live_arena); |
| _ifg->SquareUp(); |
| _ifg->Compute_Effective_Degree(); |
| // Only do conservative coalescing if requested |
| if (OptoCoalesce) { |
| // Conservative (and pessimistic) copy coalescing of those spills |
| PhaseConservativeCoalesce coalesce(*this); |
| // If max live ranges greater than cutoff, don't color the stack. |
| // This cutoff can be larger than below since it is only done once. |
| coalesce.coalesce_driver(); |
| } |
| _lrg_map.compress_uf_map_for_nodes(); |
| |
| #ifdef ASSERT |
| verify(&live_arena, true); |
| #endif |
| } else { |
| ifg.SquareUp(); |
| ifg.Compute_Effective_Degree(); |
| #ifdef ASSERT |
| set_was_low(); |
| #endif |
| } |
| |
| // Prepare for Simplify & Select |
| cache_lrg_info(); // Count degree of LRGs |
| |
| // Simplify the InterFerence Graph by removing LRGs of low degree. |
| // LRGs of low degree are trivially colorable. |
| Simplify(); |
| |
| // Select colors by re-inserting LRGs back into the IFG in reverse order. |
| // Return whether or not something spills. |
| uint spills = Select( ); |
| |
| // If we spill, split and recycle the entire thing |
| while( spills ) { |
| if( _trip_cnt++ > 24 ) { |
| DEBUG_ONLY( dump_for_spill_split_recycle(); ) |
| if( _trip_cnt > 27 ) { |
| C->record_method_not_compilable("failed spill-split-recycle sanity check"); |
| return; |
| } |
| } |
| |
| if (!_lrg_map.max_lrg_id()) { |
| return; |
| } |
| uint new_max_lrg_id = Split(_lrg_map.max_lrg_id(), &split_arena); // Split spilling LRG everywhere |
| _lrg_map.set_max_lrg_id(new_max_lrg_id); |
| // Bail out if unique gets too large (ie - unique > MaxNodeLimit - 2*NodeLimitFudgeFactor) |
| C->check_node_count(2 * NodeLimitFudgeFactor, "out of nodes after split"); |
| if (C->failing()) { |
| return; |
| } |
| |
| compact(); // Compact LRGs; return new lower max lrg |
| |
| // Nuke the live-ness and interference graph and LiveRanGe info |
| { |
| NOT_PRODUCT( Compile::TracePhase t3("computeLive", &_t_computeLive, TimeCompiler); ) |
| _live = NULL; |
| rm.reset_to_mark(); // Reclaim working storage |
| IndexSet::reset_memory(C, &live_arena); |
| ifg.init(_lrg_map.max_lrg_id()); |
| |
| // Create LiveRanGe array. |
| // Intersect register masks for all USEs and DEFs |
| gather_lrg_masks(true); |
| live.compute(_lrg_map.max_lrg_id()); |
| _live = &live; |
| } |
| must_spill = build_ifg_physical(&live_arena); |
| _ifg->SquareUp(); |
| _ifg->Compute_Effective_Degree(); |
| |
| // Only do conservative coalescing if requested |
| if (OptoCoalesce) { |
| // Conservative (and pessimistic) copy coalescing |
| PhaseConservativeCoalesce coalesce(*this); |
| // Check for few live ranges determines how aggressive coalesce is. |
| coalesce.coalesce_driver(); |
| } |
| _lrg_map.compress_uf_map_for_nodes(); |
| #ifdef ASSERT |
| verify(&live_arena, true); |
| #endif |
| cache_lrg_info(); // Count degree of LRGs |
| |
| // Simplify the InterFerence Graph by removing LRGs of low degree. |
| // LRGs of low degree are trivially colorable. |
| Simplify(); |
| |
| // Select colors by re-inserting LRGs back into the IFG in reverse order. |
| // Return whether or not something spills. |
| spills = Select(); |
| } |
| |
| // Count number of Simplify-Select trips per coloring success. |
| _allocator_attempts += _trip_cnt + 1; |
| _allocator_successes += 1; |
| |
| // Peephole remove copies |
| post_allocate_copy_removal(); |
| |
| // Merge multidefs if multiple defs representing the same value are used in a single block. |
| merge_multidefs(); |
| |
| #ifdef ASSERT |
| // Veify the graph after RA. |
| verify(&live_arena); |
| #endif |
| |
| // max_reg is past the largest *register* used. |
| // Convert that to a frame_slot number. |
| if (_max_reg <= _matcher._new_SP) { |
| _framesize = C->out_preserve_stack_slots(); |
| } |
| else { |
| _framesize = _max_reg -_matcher._new_SP; |
| } |
| assert((int)(_matcher._new_SP+_framesize) >= (int)_matcher._out_arg_limit, "framesize must be large enough"); |
| |
| // This frame must preserve the required fp alignment |
| _framesize = round_to(_framesize, Matcher::stack_alignment_in_slots()); |
| assert( _framesize >= 0 && _framesize <= 1000000, "sanity check" ); |
| #ifndef PRODUCT |
| _total_framesize += _framesize; |
| if ((int)_framesize > _max_framesize) { |
| _max_framesize = _framesize; |
| } |
| #endif |
| |
| // Convert CISC spills |
| fixup_spills(); |
| |
| // Log regalloc results |
| CompileLog* log = Compile::current()->log(); |
| if (log != NULL) { |
| log->elem("regalloc attempts='%d' success='%d'", _trip_cnt, !C->failing()); |
| } |
| |
| if (C->failing()) { |
| return; |
| } |
| |
| NOT_PRODUCT(C->verify_graph_edges();) |
| |
| // Move important info out of the live_arena to longer lasting storage. |
| alloc_node_regs(_lrg_map.size()); |
| for (uint i=0; i < _lrg_map.size(); i++) { |
| if (_lrg_map.live_range_id(i)) { // Live range associated with Node? |
| LRG &lrg = lrgs(_lrg_map.live_range_id(i)); |
| if (!lrg.alive()) { |
| set_bad(i); |
| } else if (lrg.num_regs() == 1) { |
| set1(i, lrg.reg()); |
| } else { // Must be a register-set |
| if (!lrg._fat_proj) { // Must be aligned adjacent register set |
| // Live ranges record the highest register in their mask. |
| // We want the low register for the AD file writer's convenience. |
| OptoReg::Name hi = lrg.reg(); // Get hi register |
| OptoReg::Name lo = OptoReg::add(hi, (1-lrg.num_regs())); // Find lo |
| // We have to use pair [lo,lo+1] even for wide vectors because |
| // the rest of code generation works only with pairs. It is safe |
| // since for registers encoding only 'lo' is used. |
| // Second reg from pair is used in ScheduleAndBundle on SPARC where |
| // vector max size is 8 which corresponds to registers pair. |
| // It is also used in BuildOopMaps but oop operations are not |
| // vectorized. |
| set2(i, lo); |
| } else { // Misaligned; extract 2 bits |
| OptoReg::Name hi = lrg.reg(); // Get hi register |
| lrg.Remove(hi); // Yank from mask |
| int lo = lrg.mask().find_first_elem(); // Find lo |
| set_pair(i, hi, lo); |
| } |
| } |
| if( lrg._is_oop ) _node_oops.set(i); |
| } else { |
| set_bad(i); |
| } |
| } |
| |
| // Done! |
| _live = NULL; |
| _ifg = NULL; |
| C->set_indexSet_arena(NULL); // ResourceArea is at end of scope |
| } |
| |
| void PhaseChaitin::de_ssa() { |
| // Set initial Names for all Nodes. Most Nodes get the virtual register |
| // number. A few get the ZERO live range number. These do not |
| // get allocated, but instead rely on correct scheduling to ensure that |
| // only one instance is simultaneously live at a time. |
| uint lr_counter = 1; |
| for( uint i = 0; i < _cfg.number_of_blocks(); i++ ) { |
| Block* block = _cfg.get_block(i); |
| uint cnt = block->number_of_nodes(); |
| |
| // Handle all the normal Nodes in the block |
| for( uint j = 0; j < cnt; j++ ) { |
| Node *n = block->get_node(j); |
| // Pre-color to the zero live range, or pick virtual register |
| const RegMask &rm = n->out_RegMask(); |
| _lrg_map.map(n->_idx, rm.is_NotEmpty() ? lr_counter++ : 0); |
| } |
| } |
| |
| // Reset the Union-Find mapping to be identity |
| _lrg_map.reset_uf_map(lr_counter); |
| } |
| |
| |
| // Gather LiveRanGe information, including register masks. Modification of |
| // cisc spillable in_RegMasks should not be done before AggressiveCoalesce. |
| void PhaseChaitin::gather_lrg_masks( bool after_aggressive ) { |
| |
| // Nail down the frame pointer live range |
| uint fp_lrg = _lrg_map.live_range_id(_cfg.get_root_node()->in(1)->in(TypeFunc::FramePtr)); |
| lrgs(fp_lrg)._cost += 1e12; // Cost is infinite |
| |
| // For all blocks |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| Block* block = _cfg.get_block(i); |
| |
| // For all instructions |
| for (uint j = 1; j < block->number_of_nodes(); j++) { |
| Node* n = block->get_node(j); |
| uint input_edge_start =1; // Skip control most nodes |
| if (n->is_Mach()) { |
| input_edge_start = n->as_Mach()->oper_input_base(); |
| } |
| uint idx = n->is_Copy(); |
| |
| // Get virtual register number, same as LiveRanGe index |
| uint vreg = _lrg_map.live_range_id(n); |
| LRG& lrg = lrgs(vreg); |
| if (vreg) { // No vreg means un-allocable (e.g. memory) |
| |
| // Collect has-copy bit |
| if (idx) { |
| lrg._has_copy = 1; |
| uint clidx = _lrg_map.live_range_id(n->in(idx)); |
| LRG& copy_src = lrgs(clidx); |
| copy_src._has_copy = 1; |
| } |
| |
| // Check for float-vs-int live range (used in register-pressure |
| // calculations) |
| const Type *n_type = n->bottom_type(); |
| if (n_type->is_floatingpoint()) { |
| lrg._is_float = 1; |
| } |
| |
| // Check for twice prior spilling. Once prior spilling might have |
| // spilled 'soft', 2nd prior spill should have spilled 'hard' and |
| // further spilling is unlikely to make progress. |
| if (_spilled_once.test(n->_idx)) { |
| lrg._was_spilled1 = 1; |
| if (_spilled_twice.test(n->_idx)) { |
| lrg._was_spilled2 = 1; |
| } |
| } |
| |
| #ifndef PRODUCT |
| if (trace_spilling() && lrg._def != NULL) { |
| // collect defs for MultiDef printing |
| if (lrg._defs == NULL) { |
| lrg._defs = new (_ifg->_arena) GrowableArray<Node*>(_ifg->_arena, 2, 0, NULL); |
| lrg._defs->append(lrg._def); |
| } |
| lrg._defs->append(n); |
| } |
| #endif |
| |
| // Check for a single def LRG; these can spill nicely |
| // via rematerialization. Flag as NULL for no def found |
| // yet, or 'n' for single def or -1 for many defs. |
| lrg._def = lrg._def ? NodeSentinel : n; |
| |
| // Limit result register mask to acceptable registers |
| const RegMask &rm = n->out_RegMask(); |
| lrg.AND( rm ); |
| |
| int ireg = n->ideal_reg(); |
| assert( !n->bottom_type()->isa_oop_ptr() || ireg == Op_RegP, |
| "oops must be in Op_RegP's" ); |
| |
| // Check for vector live range (only if vector register is used). |
| // On SPARC vector uses RegD which could be misaligned so it is not |
| // processes as vector in RA. |
| if (RegMask::is_vector(ireg)) |
| lrg._is_vector = 1; |
| assert(n_type->isa_vect() == NULL || lrg._is_vector || ireg == Op_RegD || ireg == Op_RegL, |
| "vector must be in vector registers"); |
| |
| // Check for bound register masks |
| const RegMask &lrgmask = lrg.mask(); |
| if (lrgmask.is_bound(ireg)) { |
| lrg._is_bound = 1; |
| } |
| |
| // Check for maximum frequency value |
| if (lrg._maxfreq < block->_freq) { |
| lrg._maxfreq = block->_freq; |
| } |
| |
| // Check for oop-iness, or long/double |
| // Check for multi-kill projection |
| switch (ireg) { |
| case MachProjNode::fat_proj: |
| // Fat projections have size equal to number of registers killed |
| lrg.set_num_regs(rm.Size()); |
| lrg.set_reg_pressure(lrg.num_regs()); |
| lrg._fat_proj = 1; |
| lrg._is_bound = 1; |
| break; |
| case Op_RegP: |
| #ifdef _LP64 |
| lrg.set_num_regs(2); // Size is 2 stack words |
| #else |
| lrg.set_num_regs(1); // Size is 1 stack word |
| #endif |
| // Register pressure is tracked relative to the maximum values |
| // suggested for that platform, INTPRESSURE and FLOATPRESSURE, |
| // and relative to other types which compete for the same regs. |
| // |
| // The following table contains suggested values based on the |
| // architectures as defined in each .ad file. |
| // INTPRESSURE and FLOATPRESSURE may be tuned differently for |
| // compile-speed or performance. |
| // Note1: |
| // SPARC and SPARCV9 reg_pressures are at 2 instead of 1 |
| // since .ad registers are defined as high and low halves. |
| // These reg_pressure values remain compatible with the code |
| // in is_high_pressure() which relates get_invalid_mask_size(), |
| // Block::_reg_pressure and INTPRESSURE, FLOATPRESSURE. |
| // Note2: |
| // SPARC -d32 has 24 registers available for integral values, |
| // but only 10 of these are safe for 64-bit longs. |
| // Using set_reg_pressure(2) for both int and long means |
| // the allocator will believe it can fit 26 longs into |
| // registers. Using 2 for longs and 1 for ints means the |
| // allocator will attempt to put 52 integers into registers. |
| // The settings below limit this problem to methods with |
| // many long values which are being run on 32-bit SPARC. |
| // |
| // ------------------- reg_pressure -------------------- |
| // Each entry is reg_pressure_per_value,number_of_regs |
| // RegL RegI RegFlags RegF RegD INTPRESSURE FLOATPRESSURE |
| // IA32 2 1 1 1 1 6 6 |
| // IA64 1 1 1 1 1 50 41 |
| // SPARC 2 2 2 2 2 48 (24) 52 (26) |
| // SPARCV9 2 2 2 2 2 48 (24) 52 (26) |
| // AMD64 1 1 1 1 1 14 15 |
| // ----------------------------------------------------- |
| #if defined(SPARC) |
| lrg.set_reg_pressure(2); // use for v9 as well |
| #else |
| lrg.set_reg_pressure(1); // normally one value per register |
| #endif |
| if( n_type->isa_oop_ptr() ) { |
| lrg._is_oop = 1; |
| } |
| break; |
| case Op_RegL: // Check for long or double |
| case Op_RegD: |
| lrg.set_num_regs(2); |
| // Define platform specific register pressure |
| #if defined(SPARC) || defined(ARM32) |
| lrg.set_reg_pressure(2); |
| #elif defined(IA32) |
| if( ireg == Op_RegL ) { |
| lrg.set_reg_pressure(2); |
| } else { |
| lrg.set_reg_pressure(1); |
| } |
| #else |
| lrg.set_reg_pressure(1); // normally one value per register |
| #endif |
| // If this def of a double forces a mis-aligned double, |
| // flag as '_fat_proj' - really flag as allowing misalignment |
| // AND changes how we count interferences. A mis-aligned |
| // double can interfere with TWO aligned pairs, or effectively |
| // FOUR registers! |
| if (rm.is_misaligned_pair()) { |
| lrg._fat_proj = 1; |
| lrg._is_bound = 1; |
| } |
| break; |
| case Op_RegF: |
| case Op_RegI: |
| case Op_RegN: |
| case Op_RegFlags: |
| case 0: // not an ideal register |
| lrg.set_num_regs(1); |
| #ifdef SPARC |
| lrg.set_reg_pressure(2); |
| #else |
| lrg.set_reg_pressure(1); |
| #endif |
| break; |
| case Op_VecS: |
| assert(Matcher::vector_size_supported(T_BYTE,4), "sanity"); |
| assert(RegMask::num_registers(Op_VecS) == RegMask::SlotsPerVecS, "sanity"); |
| lrg.set_num_regs(RegMask::SlotsPerVecS); |
| lrg.set_reg_pressure(1); |
| break; |
| case Op_VecD: |
| assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecD), "sanity"); |
| assert(RegMask::num_registers(Op_VecD) == RegMask::SlotsPerVecD, "sanity"); |
| assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecD), "vector should be aligned"); |
| lrg.set_num_regs(RegMask::SlotsPerVecD); |
| lrg.set_reg_pressure(1); |
| break; |
| case Op_VecX: |
| assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecX), "sanity"); |
| assert(RegMask::num_registers(Op_VecX) == RegMask::SlotsPerVecX, "sanity"); |
| assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecX), "vector should be aligned"); |
| lrg.set_num_regs(RegMask::SlotsPerVecX); |
| lrg.set_reg_pressure(1); |
| break; |
| case Op_VecY: |
| assert(Matcher::vector_size_supported(T_FLOAT,RegMask::SlotsPerVecY), "sanity"); |
| assert(RegMask::num_registers(Op_VecY) == RegMask::SlotsPerVecY, "sanity"); |
| assert(lrgmask.is_aligned_sets(RegMask::SlotsPerVecY), "vector should be aligned"); |
| lrg.set_num_regs(RegMask::SlotsPerVecY); |
| lrg.set_reg_pressure(1); |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| // Now do the same for inputs |
| uint cnt = n->req(); |
| // Setup for CISC SPILLING |
| uint inp = (uint)AdlcVMDeps::Not_cisc_spillable; |
| if( UseCISCSpill && after_aggressive ) { |
| inp = n->cisc_operand(); |
| if( inp != (uint)AdlcVMDeps::Not_cisc_spillable ) |
| // Convert operand number to edge index number |
| inp = n->as_Mach()->operand_index(inp); |
| } |
| // Prepare register mask for each input |
| for( uint k = input_edge_start; k < cnt; k++ ) { |
| uint vreg = _lrg_map.live_range_id(n->in(k)); |
| if (!vreg) { |
| continue; |
| } |
| |
| // If this instruction is CISC Spillable, add the flags |
| // bit to its appropriate input |
| if( UseCISCSpill && after_aggressive && inp == k ) { |
| #ifndef PRODUCT |
| if( TraceCISCSpill ) { |
| tty->print(" use_cisc_RegMask: "); |
| n->dump(); |
| } |
| #endif |
| n->as_Mach()->use_cisc_RegMask(); |
| } |
| |
| LRG &lrg = lrgs(vreg); |
| // // Testing for floating point code shape |
| // Node *test = n->in(k); |
| // if( test->is_Mach() ) { |
| // MachNode *m = test->as_Mach(); |
| // int op = m->ideal_Opcode(); |
| // if (n->is_Call() && (op == Op_AddF || op == Op_MulF) ) { |
| // int zzz = 1; |
| // } |
| // } |
| |
| // Limit result register mask to acceptable registers. |
| // Do not limit registers from uncommon uses before |
| // AggressiveCoalesce. This effectively pre-virtual-splits |
| // around uncommon uses of common defs. |
| const RegMask &rm = n->in_RegMask(k); |
| if (!after_aggressive && _cfg.get_block_for_node(n->in(k))->_freq > 1000 * block->_freq) { |
| // Since we are BEFORE aggressive coalesce, leave the register |
| // mask untrimmed by the call. This encourages more coalescing. |
| // Later, AFTER aggressive, this live range will have to spill |
| // but the spiller handles slow-path calls very nicely. |
| } else { |
| lrg.AND( rm ); |
| } |
| |
| // Check for bound register masks |
| const RegMask &lrgmask = lrg.mask(); |
| int kreg = n->in(k)->ideal_reg(); |
| bool is_vect = RegMask::is_vector(kreg); |
| assert(n->in(k)->bottom_type()->isa_vect() == NULL || |
| is_vect || kreg == Op_RegD || kreg == Op_RegL, |
| "vector must be in vector registers"); |
| if (lrgmask.is_bound(kreg)) |
| lrg._is_bound = 1; |
| |
| // If this use of a double forces a mis-aligned double, |
| // flag as '_fat_proj' - really flag as allowing misalignment |
| // AND changes how we count interferences. A mis-aligned |
| // double can interfere with TWO aligned pairs, or effectively |
| // FOUR registers! |
| #ifdef ASSERT |
| if (is_vect) { |
| assert(lrgmask.is_aligned_sets(lrg.num_regs()), "vector should be aligned"); |
| assert(!lrg._fat_proj, "sanity"); |
| assert(RegMask::num_registers(kreg) == lrg.num_regs(), "sanity"); |
| } |
| #endif |
| if (!is_vect && lrg.num_regs() == 2 && !lrg._fat_proj && rm.is_misaligned_pair()) { |
| lrg._fat_proj = 1; |
| lrg._is_bound = 1; |
| } |
| // if the LRG is an unaligned pair, we will have to spill |
| // so clear the LRG's register mask if it is not already spilled |
| if (!is_vect && !n->is_SpillCopy() && |
| (lrg._def == NULL || lrg.is_multidef() || !lrg._def->is_SpillCopy()) && |
| lrgmask.is_misaligned_pair()) { |
| lrg.Clear(); |
| } |
| |
| // Check for maximum frequency value |
| if (lrg._maxfreq < block->_freq) { |
| lrg._maxfreq = block->_freq; |
| } |
| |
| } // End for all allocated inputs |
| } // end for all instructions |
| } // end for all blocks |
| |
| // Final per-liverange setup |
| for (uint i2 = 0; i2 < _lrg_map.max_lrg_id(); i2++) { |
| LRG &lrg = lrgs(i2); |
| assert(!lrg._is_vector || !lrg._fat_proj, "sanity"); |
| if (lrg.num_regs() > 1 && !lrg._fat_proj) { |
| lrg.clear_to_sets(); |
| } |
| lrg.compute_set_mask_size(); |
| if (lrg.not_free()) { // Handle case where we lose from the start |
| lrg.set_reg(OptoReg::Name(LRG::SPILL_REG)); |
| lrg._direct_conflict = 1; |
| } |
| lrg.set_degree(0); // no neighbors in IFG yet |
| } |
| } |
| |
| // Set the was-lo-degree bit. Conservative coalescing should not change the |
| // colorability of the graph. If any live range was of low-degree before |
| // coalescing, it should Simplify. This call sets the was-lo-degree bit. |
| // The bit is checked in Simplify. |
| void PhaseChaitin::set_was_low() { |
| #ifdef ASSERT |
| for (uint i = 1; i < _lrg_map.max_lrg_id(); i++) { |
| int size = lrgs(i).num_regs(); |
| uint old_was_lo = lrgs(i)._was_lo; |
| lrgs(i)._was_lo = 0; |
| if( lrgs(i).lo_degree() ) { |
| lrgs(i)._was_lo = 1; // Trivially of low degree |
| } else { // Else check the Brigg's assertion |
| // Brigg's observation is that the lo-degree neighbors of a |
| // hi-degree live range will not interfere with the color choices |
| // of said hi-degree live range. The Simplify reverse-stack-coloring |
| // order takes care of the details. Hence you do not have to count |
| // low-degree neighbors when determining if this guy colors. |
| int briggs_degree = 0; |
| IndexSet *s = _ifg->neighbors(i); |
| IndexSetIterator elements(s); |
| uint lidx; |
| while((lidx = elements.next()) != 0) { |
| if( !lrgs(lidx).lo_degree() ) |
| briggs_degree += MAX2(size,lrgs(lidx).num_regs()); |
| } |
| if( briggs_degree < lrgs(i).degrees_of_freedom() ) |
| lrgs(i)._was_lo = 1; // Low degree via the briggs assertion |
| } |
| assert(old_was_lo <= lrgs(i)._was_lo, "_was_lo may not decrease"); |
| } |
| #endif |
| } |
| |
| #define REGISTER_CONSTRAINED 16 |
| |
| // Compute cost/area ratio, in case we spill. Build the lo-degree list. |
| void PhaseChaitin::cache_lrg_info( ) { |
| |
| for (uint i = 1; i < _lrg_map.max_lrg_id(); i++) { |
| LRG &lrg = lrgs(i); |
| |
| // Check for being of low degree: means we can be trivially colored. |
| // Low degree, dead or must-spill guys just get to simplify right away |
| if( lrg.lo_degree() || |
| !lrg.alive() || |
| lrg._must_spill ) { |
| // Split low degree list into those guys that must get a |
| // register and those that can go to register or stack. |
| // The idea is LRGs that can go register or stack color first when |
| // they have a good chance of getting a register. The register-only |
| // lo-degree live ranges always get a register. |
| OptoReg::Name hi_reg = lrg.mask().find_last_elem(); |
| if( OptoReg::is_stack(hi_reg)) { // Can go to stack? |
| lrg._next = _lo_stk_degree; |
| _lo_stk_degree = i; |
| } else { |
| lrg._next = _lo_degree; |
| _lo_degree = i; |
| } |
| } else { // Else high degree |
| lrgs(_hi_degree)._prev = i; |
| lrg._next = _hi_degree; |
| lrg._prev = 0; |
| _hi_degree = i; |
| } |
| } |
| } |
| |
| // Simplify the IFG by removing LRGs of low degree that have NO copies |
| void PhaseChaitin::Pre_Simplify( ) { |
| |
| // Warm up the lo-degree no-copy list |
| int lo_no_copy = 0; |
| for (uint i = 1; i < _lrg_map.max_lrg_id(); i++) { |
| if ((lrgs(i).lo_degree() && !lrgs(i)._has_copy) || |
| !lrgs(i).alive() || |
| lrgs(i)._must_spill) { |
| lrgs(i)._next = lo_no_copy; |
| lo_no_copy = i; |
| } |
| } |
| |
| while( lo_no_copy ) { |
| uint lo = lo_no_copy; |
| lo_no_copy = lrgs(lo)._next; |
| int size = lrgs(lo).num_regs(); |
| |
| // Put the simplified guy on the simplified list. |
| lrgs(lo)._next = _simplified; |
| _simplified = lo; |
| |
| // Yank this guy from the IFG. |
| IndexSet *adj = _ifg->remove_node( lo ); |
| |
| // If any neighbors' degrees fall below their number of |
| // allowed registers, then put that neighbor on the low degree |
| // list. Note that 'degree' can only fall and 'numregs' is |
| // unchanged by this action. Thus the two are equal at most once, |
| // so LRGs hit the lo-degree worklists at most once. |
| IndexSetIterator elements(adj); |
| uint neighbor; |
| while ((neighbor = elements.next()) != 0) { |
| LRG *n = &lrgs(neighbor); |
| assert( _ifg->effective_degree(neighbor) == n->degree(), "" ); |
| |
| // Check for just becoming of-low-degree |
| if( n->just_lo_degree() && !n->_has_copy ) { |
| assert(!(*_ifg->_yanked)[neighbor],"Cannot move to lo degree twice"); |
| // Put on lo-degree list |
| n->_next = lo_no_copy; |
| lo_no_copy = neighbor; |
| } |
| } |
| } // End of while lo-degree no_copy worklist not empty |
| |
| // No more lo-degree no-copy live ranges to simplify |
| } |
| |
| // Simplify the IFG by removing LRGs of low degree. |
| void PhaseChaitin::Simplify( ) { |
| |
| while( 1 ) { // Repeat till simplified it all |
| // May want to explore simplifying lo_degree before _lo_stk_degree. |
| // This might result in more spills coloring into registers during |
| // Select(). |
| while( _lo_degree || _lo_stk_degree ) { |
| // If possible, pull from lo_stk first |
| uint lo; |
| if( _lo_degree ) { |
| lo = _lo_degree; |
| _lo_degree = lrgs(lo)._next; |
| } else { |
| lo = _lo_stk_degree; |
| _lo_stk_degree = lrgs(lo)._next; |
| } |
| |
| // Put the simplified guy on the simplified list. |
| lrgs(lo)._next = _simplified; |
| _simplified = lo; |
| // If this guy is "at risk" then mark his current neighbors |
| if( lrgs(lo)._at_risk ) { |
| IndexSetIterator elements(_ifg->neighbors(lo)); |
| uint datum; |
| while ((datum = elements.next()) != 0) { |
| lrgs(datum)._risk_bias = lo; |
| } |
| } |
| |
| // Yank this guy from the IFG. |
| IndexSet *adj = _ifg->remove_node( lo ); |
| |
| // If any neighbors' degrees fall below their number of |
| // allowed registers, then put that neighbor on the low degree |
| // list. Note that 'degree' can only fall and 'numregs' is |
| // unchanged by this action. Thus the two are equal at most once, |
| // so LRGs hit the lo-degree worklist at most once. |
| IndexSetIterator elements(adj); |
| uint neighbor; |
| while ((neighbor = elements.next()) != 0) { |
| LRG *n = &lrgs(neighbor); |
| #ifdef ASSERT |
| if( VerifyOpto || VerifyRegisterAllocator ) { |
| assert( _ifg->effective_degree(neighbor) == n->degree(), "" ); |
| } |
| #endif |
| |
| // Check for just becoming of-low-degree just counting registers. |
| // _must_spill live ranges are already on the low degree list. |
| if( n->just_lo_degree() && !n->_must_spill ) { |
| assert(!(*_ifg->_yanked)[neighbor],"Cannot move to lo degree twice"); |
| // Pull from hi-degree list |
| uint prev = n->_prev; |
| uint next = n->_next; |
| if( prev ) lrgs(prev)._next = next; |
| else _hi_degree = next; |
| lrgs(next)._prev = prev; |
| n->_next = _lo_degree; |
| _lo_degree = neighbor; |
| } |
| } |
| } // End of while lo-degree/lo_stk_degree worklist not empty |
| |
| // Check for got everything: is hi-degree list empty? |
| if( !_hi_degree ) break; |
| |
| // Time to pick a potential spill guy |
| uint lo_score = _hi_degree; |
| double score = lrgs(lo_score).score(); |
| double area = lrgs(lo_score)._area; |
| double cost = lrgs(lo_score)._cost; |
| bool bound = lrgs(lo_score)._is_bound; |
| |
| // Find cheapest guy |
| debug_only( int lo_no_simplify=0; ); |
| for( uint i = _hi_degree; i; i = lrgs(i)._next ) { |
| assert( !(*_ifg->_yanked)[i], "" ); |
| // It's just vaguely possible to move hi-degree to lo-degree without |
| // going through a just-lo-degree stage: If you remove a double from |
| // a float live range it's degree will drop by 2 and you can skip the |
| // just-lo-degree stage. It's very rare (shows up after 5000+ methods |
| // in -Xcomp of Java2Demo). So just choose this guy to simplify next. |
| if( lrgs(i).lo_degree() ) { |
| lo_score = i; |
| break; |
| } |
| debug_only( if( lrgs(i)._was_lo ) lo_no_simplify=i; ); |
| double iscore = lrgs(i).score(); |
| double iarea = lrgs(i)._area; |
| double icost = lrgs(i)._cost; |
| bool ibound = lrgs(i)._is_bound; |
| |
| // Compare cost/area of i vs cost/area of lo_score. Smaller cost/area |
| // wins. Ties happen because all live ranges in question have spilled |
| // a few times before and the spill-score adds a huge number which |
| // washes out the low order bits. We are choosing the lesser of 2 |
| // evils; in this case pick largest area to spill. |
| // Ties also happen when live ranges are defined and used only inside |
| // one block. In which case their area is 0 and score set to max. |
| // In such case choose bound live range over unbound to free registers |
| // or with smaller cost to spill. |
| if( iscore < score || |
| (iscore == score && iarea > area && lrgs(lo_score)._was_spilled2) || |
| (iscore == score && iarea == area && |
| ( (ibound && !bound) || ibound == bound && (icost < cost) )) ) { |
| lo_score = i; |
| score = iscore; |
| area = iarea; |
| cost = icost; |
| bound = ibound; |
| } |
| } |
| LRG *lo_lrg = &lrgs(lo_score); |
| // The live range we choose for spilling is either hi-degree, or very |
| // rarely it can be low-degree. If we choose a hi-degree live range |
| // there better not be any lo-degree choices. |
| assert( lo_lrg->lo_degree() || !lo_no_simplify, "Live range was lo-degree before coalesce; should simplify" ); |
| |
| // Pull from hi-degree list |
| uint prev = lo_lrg->_prev; |
| uint next = lo_lrg->_next; |
| if( prev ) lrgs(prev)._next = next; |
| else _hi_degree = next; |
| lrgs(next)._prev = prev; |
| // Jam him on the lo-degree list, despite his high degree. |
| // Maybe he'll get a color, and maybe he'll spill. |
| // Only Select() will know. |
| lrgs(lo_score)._at_risk = true; |
| _lo_degree = lo_score; |
| lo_lrg->_next = 0; |
| |
| } // End of while not simplified everything |
| |
| } |
| |
| // Is 'reg' register legal for 'lrg'? |
| static bool is_legal_reg(LRG &lrg, OptoReg::Name reg, int chunk) { |
| if (reg >= chunk && reg < (chunk + RegMask::CHUNK_SIZE) && |
| lrg.mask().Member(OptoReg::add(reg,-chunk))) { |
| // RA uses OptoReg which represent the highest element of a registers set. |
| // For example, vectorX (128bit) on x86 uses [XMM,XMMb,XMMc,XMMd] set |
| // in which XMMd is used by RA to represent such vectors. A double value |
| // uses [XMM,XMMb] pairs and XMMb is used by RA for it. |
| // The register mask uses largest bits set of overlapping register sets. |
| // On x86 with AVX it uses 8 bits for each XMM registers set. |
| // |
| // The 'lrg' already has cleared-to-set register mask (done in Select() |
| // before calling choose_color()). Passing mask.Member(reg) check above |
| // indicates that the size (num_regs) of 'reg' set is less or equal to |
| // 'lrg' set size. |
| // For set size 1 any register which is member of 'lrg' mask is legal. |
| if (lrg.num_regs()==1) |
| return true; |
| // For larger sets only an aligned register with the same set size is legal. |
| int mask = lrg.num_regs()-1; |
| if ((reg&mask) == mask) |
| return true; |
| } |
| return false; |
| } |
| |
| // Choose a color using the biasing heuristic |
| OptoReg::Name PhaseChaitin::bias_color( LRG &lrg, int chunk ) { |
| |
| // Check for "at_risk" LRG's |
| uint risk_lrg = _lrg_map.find(lrg._risk_bias); |
| if( risk_lrg != 0 ) { |
| // Walk the colored neighbors of the "at_risk" candidate |
| // Choose a color which is both legal and already taken by a neighbor |
| // of the "at_risk" candidate in order to improve the chances of the |
| // "at_risk" candidate of coloring |
| IndexSetIterator elements(_ifg->neighbors(risk_lrg)); |
| uint datum; |
| while ((datum = elements.next()) != 0) { |
| OptoReg::Name reg = lrgs(datum).reg(); |
| // If this LRG's register is legal for us, choose it |
| if (is_legal_reg(lrg, reg, chunk)) |
| return reg; |
| } |
| } |
| |
| uint copy_lrg = _lrg_map.find(lrg._copy_bias); |
| if( copy_lrg != 0 ) { |
| // If he has a color, |
| if( !(*(_ifg->_yanked))[copy_lrg] ) { |
| OptoReg::Name reg = lrgs(copy_lrg).reg(); |
| // And it is legal for you, |
| if (is_legal_reg(lrg, reg, chunk)) |
| return reg; |
| } else if( chunk == 0 ) { |
| // Choose a color which is legal for him |
| RegMask tempmask = lrg.mask(); |
| tempmask.AND(lrgs(copy_lrg).mask()); |
| tempmask.clear_to_sets(lrg.num_regs()); |
| OptoReg::Name reg = tempmask.find_first_set(lrg.num_regs()); |
| if (OptoReg::is_valid(reg)) |
| return reg; |
| } |
| } |
| |
| // If no bias info exists, just go with the register selection ordering |
| if (lrg._is_vector || lrg.num_regs() == 2) { |
| // Find an aligned set |
| return OptoReg::add(lrg.mask().find_first_set(lrg.num_regs()),chunk); |
| } |
| |
| // CNC - Fun hack. Alternate 1st and 2nd selection. Enables post-allocate |
| // copy removal to remove many more copies, by preventing a just-assigned |
| // register from being repeatedly assigned. |
| OptoReg::Name reg = lrg.mask().find_first_elem(); |
| if( (++_alternate & 1) && OptoReg::is_valid(reg) ) { |
| // This 'Remove; find; Insert' idiom is an expensive way to find the |
| // SECOND element in the mask. |
| lrg.Remove(reg); |
| OptoReg::Name reg2 = lrg.mask().find_first_elem(); |
| lrg.Insert(reg); |
| if( OptoReg::is_reg(reg2)) |
| reg = reg2; |
| } |
| return OptoReg::add( reg, chunk ); |
| } |
| |
| // Choose a color in the current chunk |
| OptoReg::Name PhaseChaitin::choose_color( LRG &lrg, int chunk ) { |
| assert( C->in_preserve_stack_slots() == 0 || chunk != 0 || lrg._is_bound || lrg.mask().is_bound1() || !lrg.mask().Member(OptoReg::Name(_matcher._old_SP-1)), "must not allocate stack0 (inside preserve area)"); |
| assert(C->out_preserve_stack_slots() == 0 || chunk != 0 || lrg._is_bound || lrg.mask().is_bound1() || !lrg.mask().Member(OptoReg::Name(_matcher._old_SP+0)), "must not allocate stack0 (inside preserve area)"); |
| |
| if( lrg.num_regs() == 1 || // Common Case |
| !lrg._fat_proj ) // Aligned+adjacent pairs ok |
| // Use a heuristic to "bias" the color choice |
| return bias_color(lrg, chunk); |
| |
| assert(!lrg._is_vector, "should be not vector here" ); |
| assert( lrg.num_regs() >= 2, "dead live ranges do not color" ); |
| |
| // Fat-proj case or misaligned double argument. |
| assert(lrg.compute_mask_size() == lrg.num_regs() || |
| lrg.num_regs() == 2,"fat projs exactly color" ); |
| assert( !chunk, "always color in 1st chunk" ); |
| // Return the highest element in the set. |
| return lrg.mask().find_last_elem(); |
| } |
| |
| // Select colors by re-inserting LRGs back into the IFG. LRGs are re-inserted |
| // in reverse order of removal. As long as nothing of hi-degree was yanked, |
| // everything going back is guaranteed a color. Select that color. If some |
| // hi-degree LRG cannot get a color then we record that we must spill. |
| uint PhaseChaitin::Select( ) { |
| uint spill_reg = LRG::SPILL_REG; |
| _max_reg = OptoReg::Name(0); // Past max register used |
| while( _simplified ) { |
| // Pull next LRG from the simplified list - in reverse order of removal |
| uint lidx = _simplified; |
| LRG *lrg = &lrgs(lidx); |
| _simplified = lrg->_next; |
| |
| |
| #ifndef PRODUCT |
| if (trace_spilling()) { |
| ttyLocker ttyl; |
| tty->print_cr("L%d selecting degree %d degrees_of_freedom %d", lidx, lrg->degree(), |
| lrg->degrees_of_freedom()); |
| lrg->dump(); |
| } |
| #endif |
| |
| // Re-insert into the IFG |
| _ifg->re_insert(lidx); |
| if( !lrg->alive() ) continue; |
| // capture allstackedness flag before mask is hacked |
| const int is_allstack = lrg->mask().is_AllStack(); |
| |
| // Yeah, yeah, yeah, I know, I know. I can refactor this |
| // to avoid the GOTO, although the refactored code will not |
| // be much clearer. We arrive here IFF we have a stack-based |
| // live range that cannot color in the current chunk, and it |
| // has to move into the next free stack chunk. |
| int chunk = 0; // Current chunk is first chunk |
| retry_next_chunk: |
| |
| // Remove neighbor colors |
| IndexSet *s = _ifg->neighbors(lidx); |
| |
| debug_only(RegMask orig_mask = lrg->mask();) |
| IndexSetIterator elements(s); |
| uint neighbor; |
| while ((neighbor = elements.next()) != 0) { |
| // Note that neighbor might be a spill_reg. In this case, exclusion |
| // of its color will be a no-op, since the spill_reg chunk is in outer |
| // space. Also, if neighbor is in a different chunk, this exclusion |
| // will be a no-op. (Later on, if lrg runs out of possible colors in |
| // its chunk, a new chunk of color may be tried, in which case |
| // examination of neighbors is started again, at retry_next_chunk.) |
| LRG &nlrg = lrgs(neighbor); |
| OptoReg::Name nreg = nlrg.reg(); |
| // Only subtract masks in the same chunk |
| if( nreg >= chunk && nreg < chunk + RegMask::CHUNK_SIZE ) { |
| #ifndef PRODUCT |
| uint size = lrg->mask().Size(); |
| RegMask rm = lrg->mask(); |
| #endif |
| lrg->SUBTRACT(nlrg.mask()); |
| #ifndef PRODUCT |
| if (trace_spilling() && lrg->mask().Size() != size) { |
| ttyLocker ttyl; |
| tty->print("L%d ", lidx); |
| rm.dump(); |
| tty->print(" intersected L%d ", neighbor); |
| nlrg.mask().dump(); |
| tty->print(" removed "); |
| rm.SUBTRACT(lrg->mask()); |
| rm.dump(); |
| tty->print(" leaving "); |
| lrg->mask().dump(); |
| tty->cr(); |
| } |
| #endif |
| } |
| } |
| //assert(is_allstack == lrg->mask().is_AllStack(), "nbrs must not change AllStackedness"); |
| // Aligned pairs need aligned masks |
| assert(!lrg->_is_vector || !lrg->_fat_proj, "sanity"); |
| if (lrg->num_regs() > 1 && !lrg->_fat_proj) { |
| lrg->clear_to_sets(); |
| } |
| |
| // Check if a color is available and if so pick the color |
| OptoReg::Name reg = choose_color( *lrg, chunk ); |
| #ifdef SPARC |
| debug_only(lrg->compute_set_mask_size()); |
| assert(lrg->num_regs() < 2 || lrg->is_bound() || is_even(reg-1), "allocate all doubles aligned"); |
| #endif |
| |
| //--------------- |
| // If we fail to color and the AllStack flag is set, trigger |
| // a chunk-rollover event |
| if(!OptoReg::is_valid(OptoReg::add(reg,-chunk)) && is_allstack) { |
| // Bump register mask up to next stack chunk |
| chunk += RegMask::CHUNK_SIZE; |
| lrg->Set_All(); |
| |
| goto retry_next_chunk; |
| } |
| |
| //--------------- |
| // Did we get a color? |
| else if( OptoReg::is_valid(reg)) { |
| #ifndef PRODUCT |
| RegMask avail_rm = lrg->mask(); |
| #endif |
| |
| // Record selected register |
| lrg->set_reg(reg); |
| |
| if( reg >= _max_reg ) // Compute max register limit |
| _max_reg = OptoReg::add(reg,1); |
| // Fold reg back into normal space |
| reg = OptoReg::add(reg,-chunk); |
| |
| // If the live range is not bound, then we actually had some choices |
| // to make. In this case, the mask has more bits in it than the colors |
| // chosen. Restrict the mask to just what was picked. |
| int n_regs = lrg->num_regs(); |
| assert(!lrg->_is_vector || !lrg->_fat_proj, "sanity"); |
| if (n_regs == 1 || !lrg->_fat_proj) { |
| assert(!lrg->_is_vector || n_regs <= RegMask::SlotsPerVecY, "sanity"); |
| lrg->Clear(); // Clear the mask |
| lrg->Insert(reg); // Set regmask to match selected reg |
| // For vectors and pairs, also insert the low bit of the pair |
| for (int i = 1; i < n_regs; i++) |
| lrg->Insert(OptoReg::add(reg,-i)); |
| lrg->set_mask_size(n_regs); |
| } else { // Else fatproj |
| // mask must be equal to fatproj bits, by definition |
| } |
| #ifndef PRODUCT |
| if (trace_spilling()) { |
| ttyLocker ttyl; |
| tty->print("L%d selected ", lidx); |
| lrg->mask().dump(); |
| tty->print(" from "); |
| avail_rm.dump(); |
| tty->cr(); |
| } |
| #endif |
| // Note that reg is the highest-numbered register in the newly-bound mask. |
| } // end color available case |
| |
| //--------------- |
| // Live range is live and no colors available |
| else { |
| assert( lrg->alive(), "" ); |
| assert( !lrg->_fat_proj || lrg->is_multidef() || |
| lrg->_def->outcnt() > 0, "fat_proj cannot spill"); |
| assert( !orig_mask.is_AllStack(), "All Stack does not spill" ); |
| |
| // Assign the special spillreg register |
| lrg->set_reg(OptoReg::Name(spill_reg++)); |
| // Do not empty the regmask; leave mask_size lying around |
| // for use during Spilling |
| #ifndef PRODUCT |
| if( trace_spilling() ) { |
| ttyLocker ttyl; |
| tty->print("L%d spilling with neighbors: ", lidx); |
| s->dump(); |
| debug_only(tty->print(" original mask: ")); |
| debug_only(orig_mask.dump()); |
| dump_lrg(lidx); |
| } |
| #endif |
| } // end spill case |
| |
| } |
| |
| return spill_reg-LRG::SPILL_REG; // Return number of spills |
| } |
| |
| // Copy 'was_spilled'-edness from the source Node to the dst Node. |
| void PhaseChaitin::copy_was_spilled( Node *src, Node *dst ) { |
| if( _spilled_once.test(src->_idx) ) { |
| _spilled_once.set(dst->_idx); |
| lrgs(_lrg_map.find(dst))._was_spilled1 = 1; |
| if( _spilled_twice.test(src->_idx) ) { |
| _spilled_twice.set(dst->_idx); |
| lrgs(_lrg_map.find(dst))._was_spilled2 = 1; |
| } |
| } |
| } |
| |
| // Set the 'spilled_once' or 'spilled_twice' flag on a node. |
| void PhaseChaitin::set_was_spilled( Node *n ) { |
| if( _spilled_once.test_set(n->_idx) ) |
| _spilled_twice.set(n->_idx); |
| } |
| |
| // Convert Ideal spill instructions into proper FramePtr + offset Loads and |
| // Stores. Use-def chains are NOT preserved, but Node->LRG->reg maps are. |
| void PhaseChaitin::fixup_spills() { |
| // This function does only cisc spill work. |
| if( !UseCISCSpill ) return; |
| |
| NOT_PRODUCT( Compile::TracePhase t3("fixupSpills", &_t_fixupSpills, TimeCompiler); ) |
| |
| // Grab the Frame Pointer |
| Node *fp = _cfg.get_root_block()->head()->in(1)->in(TypeFunc::FramePtr); |
| |
| // For all blocks |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| Block* block = _cfg.get_block(i); |
| |
| // For all instructions in block |
| uint last_inst = block->end_idx(); |
| for (uint j = 1; j <= last_inst; j++) { |
| Node* n = block->get_node(j); |
| |
| // Dead instruction??? |
| assert( n->outcnt() != 0 ||// Nothing dead after post alloc |
| C->top() == n || // Or the random TOP node |
| n->is_Proj(), // Or a fat-proj kill node |
| "No dead instructions after post-alloc" ); |
| |
| int inp = n->cisc_operand(); |
| if( inp != AdlcVMDeps::Not_cisc_spillable ) { |
| // Convert operand number to edge index number |
| MachNode *mach = n->as_Mach(); |
| inp = mach->operand_index(inp); |
| Node *src = n->in(inp); // Value to load or store |
| LRG &lrg_cisc = lrgs(_lrg_map.find_const(src)); |
| OptoReg::Name src_reg = lrg_cisc.reg(); |
| // Doubles record the HIGH register of an adjacent pair. |
| src_reg = OptoReg::add(src_reg,1-lrg_cisc.num_regs()); |
| if( OptoReg::is_stack(src_reg) ) { // If input is on stack |
| // This is a CISC Spill, get stack offset and construct new node |
| #ifndef PRODUCT |
| if( TraceCISCSpill ) { |
| tty->print(" reg-instr: "); |
| n->dump(); |
| } |
| #endif |
| int stk_offset = reg2offset(src_reg); |
| // Bailout if we might exceed node limit when spilling this instruction |
| C->check_node_count(0, "out of nodes fixing spills"); |
| if (C->failing()) return; |
| // Transform node |
| MachNode *cisc = mach->cisc_version(stk_offset, C)->as_Mach(); |
| cisc->set_req(inp,fp); // Base register is frame pointer |
| if( cisc->oper_input_base() > 1 && mach->oper_input_base() <= 1 ) { |
| assert( cisc->oper_input_base() == 2, "Only adding one edge"); |
| cisc->ins_req(1,src); // Requires a memory edge |
| } |
| block->map_node(cisc, j); // Insert into basic block |
| n->subsume_by(cisc, C); // Correct graph |
| // |
| ++_used_cisc_instructions; |
| #ifndef PRODUCT |
| if( TraceCISCSpill ) { |
| tty->print(" cisc-instr: "); |
| cisc->dump(); |
| } |
| #endif |
| } else { |
| #ifndef PRODUCT |
| if( TraceCISCSpill ) { |
| tty->print(" using reg-instr: "); |
| n->dump(); |
| } |
| #endif |
| ++_unused_cisc_instructions; // input can be on stack |
| } |
| } |
| |
| } // End of for all instructions |
| |
| } // End of for all blocks |
| } |
| |
| // Helper to stretch above; recursively discover the base Node for a |
| // given derived Node. Easy for AddP-related machine nodes, but needs |
| // to be recursive for derived Phis. |
| Node *PhaseChaitin::find_base_for_derived( Node **derived_base_map, Node *derived, uint &maxlrg ) { |
| // See if already computed; if so return it |
| if( derived_base_map[derived->_idx] ) |
| return derived_base_map[derived->_idx]; |
| |
| // See if this happens to be a base. |
| // NOTE: we use TypePtr instead of TypeOopPtr because we can have |
| // pointers derived from NULL! These are always along paths that |
| // can't happen at run-time but the optimizer cannot deduce it so |
| // we have to handle it gracefully. |
| assert(!derived->bottom_type()->isa_narrowoop() || |
| derived->bottom_type()->make_ptr()->is_ptr()->_offset == 0, "sanity"); |
| const TypePtr *tj = derived->bottom_type()->isa_ptr(); |
| // If its an OOP with a non-zero offset, then it is derived. |
| if( tj == NULL || tj->_offset == 0 ) { |
| derived_base_map[derived->_idx] = derived; |
| return derived; |
| } |
| // Derived is NULL+offset? Base is NULL! |
| if( derived->is_Con() ) { |
| Node *base = _matcher.mach_null(); |
| assert(base != NULL, "sanity"); |
| if (base->in(0) == NULL) { |
| // Initialize it once and make it shared: |
| // set control to _root and place it into Start block |
| // (where top() node is placed). |
| base->init_req(0, _cfg.get_root_node()); |
| Block *startb = _cfg.get_block_for_node(C->top()); |
| uint node_pos = startb->find_node(C->top()); |
| startb->insert_node(base, node_pos); |
| _cfg.map_node_to_block(base, startb); |
| assert(_lrg_map.live_range_id(base) == 0, "should not have LRG yet"); |
| |
| // The loadConP0 might have projection nodes depending on architecture |
| // Add the projection nodes to the CFG |
| for (DUIterator_Fast imax, i = base->fast_outs(imax); i < imax; i++) { |
| Node* use = base->fast_out(i); |
| if (use->is_MachProj()) { |
| startb->insert_node(use, ++node_pos); |
| _cfg.map_node_to_block(use, startb); |
| new_lrg(use, maxlrg++); |
| } |
| } |
| } |
| if (_lrg_map.live_range_id(base) == 0) { |
| new_lrg(base, maxlrg++); |
| } |
| assert(base->in(0) == _cfg.get_root_node() && _cfg.get_block_for_node(base) == _cfg.get_block_for_node(C->top()), "base NULL should be shared"); |
| derived_base_map[derived->_idx] = base; |
| return base; |
| } |
| |
| // Check for AddP-related opcodes |
| if (!derived->is_Phi()) { |
| assert(derived->as_Mach()->ideal_Opcode() == Op_AddP, err_msg_res("but is: %s", derived->Name())); |
| Node *base = derived->in(AddPNode::Base); |
| derived_base_map[derived->_idx] = base; |
| return base; |
| } |
| |
| // Recursively find bases for Phis. |
| // First check to see if we can avoid a base Phi here. |
| Node *base = find_base_for_derived( derived_base_map, derived->in(1),maxlrg); |
| uint i; |
| for( i = 2; i < derived->req(); i++ ) |
| if( base != find_base_for_derived( derived_base_map,derived->in(i),maxlrg)) |
| break; |
| // Went to the end without finding any different bases? |
| if( i == derived->req() ) { // No need for a base Phi here |
| derived_base_map[derived->_idx] = base; |
| return base; |
| } |
| |
| // Now we see we need a base-Phi here to merge the bases |
| const Type *t = base->bottom_type(); |
| base = new (C) PhiNode( derived->in(0), t ); |
| for( i = 1; i < derived->req(); i++ ) { |
| base->init_req(i, find_base_for_derived(derived_base_map, derived->in(i), maxlrg)); |
| t = t->meet(base->in(i)->bottom_type()); |
| } |
| base->as_Phi()->set_type(t); |
| |
| // Search the current block for an existing base-Phi |
| Block *b = _cfg.get_block_for_node(derived); |
| for( i = 1; i <= b->end_idx(); i++ ) {// Search for matching Phi |
| Node *phi = b->get_node(i); |
| if( !phi->is_Phi() ) { // Found end of Phis with no match? |
| b->insert_node(base, i); // Must insert created Phi here as base |
| _cfg.map_node_to_block(base, b); |
| new_lrg(base,maxlrg++); |
| break; |
| } |
| // See if Phi matches. |
| uint j; |
| for( j = 1; j < base->req(); j++ ) |
| if( phi->in(j) != base->in(j) && |
| !(phi->in(j)->is_Con() && base->in(j)->is_Con()) ) // allow different NULLs |
| break; |
| if( j == base->req() ) { // All inputs match? |
| base = phi; // Then use existing 'phi' and drop 'base' |
| break; |
| } |
| } |
| |
| |
| // Cache info for later passes |
| derived_base_map[derived->_idx] = base; |
| return base; |
| } |
| |
| // At each Safepoint, insert extra debug edges for each pair of derived value/ |
| // base pointer that is live across the Safepoint for oopmap building. The |
| // edge pairs get added in after sfpt->jvmtail()->oopoff(), but are in the |
| // required edge set. |
| bool PhaseChaitin::stretch_base_pointer_live_ranges(ResourceArea *a) { |
| int must_recompute_live = false; |
| uint maxlrg = _lrg_map.max_lrg_id(); |
| Node **derived_base_map = (Node**)a->Amalloc(sizeof(Node*)*C->unique()); |
| memset( derived_base_map, 0, sizeof(Node*)*C->unique() ); |
| |
| // For all blocks in RPO do... |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| Block* block = _cfg.get_block(i); |
| // Note use of deep-copy constructor. I cannot hammer the original |
| // liveout bits, because they are needed by the following coalesce pass. |
| IndexSet liveout(_live->live(block)); |
| |
| for (uint j = block->end_idx() + 1; j > 1; j--) { |
| Node* n = block->get_node(j - 1); |
| |
| // Pre-split compares of loop-phis. Loop-phis form a cycle we would |
| // like to see in the same register. Compare uses the loop-phi and so |
| // extends its live range BUT cannot be part of the cycle. If this |
| // extended live range overlaps with the update of the loop-phi value |
| // we need both alive at the same time -- which requires at least 1 |
| // copy. But because Intel has only 2-address registers we end up with |
| // at least 2 copies, one before the loop-phi update instruction and |
| // one after. Instead we split the input to the compare just after the |
| // phi. |
| if( n->is_Mach() && n->as_Mach()->ideal_Opcode() == Op_CmpI ) { |
| Node *phi = n->in(1); |
| if( phi->is_Phi() && phi->as_Phi()->region()->is_Loop() ) { |
| Block *phi_block = _cfg.get_block_for_node(phi); |
| if (_cfg.get_block_for_node(phi_block->pred(2)) == block) { |
| const RegMask *mask = C->matcher()->idealreg2spillmask[Op_RegI]; |
| Node *spill = new (C) MachSpillCopyNode( phi, *mask, *mask ); |
| insert_proj( phi_block, 1, spill, maxlrg++ ); |
| n->set_req(1,spill); |
| must_recompute_live = true; |
| } |
| } |
| } |
| |
| // Get value being defined |
| uint lidx = _lrg_map.live_range_id(n); |
| // Ignore the occasional brand-new live range |
| if (lidx && lidx < _lrg_map.max_lrg_id()) { |
| // Remove from live-out set |
| liveout.remove(lidx); |
| |
| // Copies do not define a new value and so do not interfere. |
| // Remove the copies source from the liveout set before interfering. |
| uint idx = n->is_Copy(); |
| if (idx) { |
| liveout.remove(_lrg_map.live_range_id(n->in(idx))); |
| } |
| } |
| |
| // Found a safepoint? |
| JVMState *jvms = n->jvms(); |
| if( jvms ) { |
| // Now scan for a live derived pointer |
| IndexSetIterator elements(&liveout); |
| uint neighbor; |
| while ((neighbor = elements.next()) != 0) { |
| // Find reaching DEF for base and derived values |
| // This works because we are still in SSA during this call. |
| Node *derived = lrgs(neighbor)._def; |
| const TypePtr *tj = derived->bottom_type()->isa_ptr(); |
| assert(!derived->bottom_type()->isa_narrowoop() || |
| derived->bottom_type()->make_ptr()->is_ptr()->_offset == 0, "sanity"); |
| // If its an OOP with a non-zero offset, then it is derived. |
| if( tj && tj->_offset != 0 && tj->isa_oop_ptr() ) { |
| Node *base = find_base_for_derived(derived_base_map, derived, maxlrg); |
| assert(base->_idx < _lrg_map.size(), ""); |
| // Add reaching DEFs of derived pointer and base pointer as a |
| // pair of inputs |
| n->add_req(derived); |
| n->add_req(base); |
| |
| // See if the base pointer is already live to this point. |
| // Since I'm working on the SSA form, live-ness amounts to |
| // reaching def's. So if I find the base's live range then |
| // I know the base's def reaches here. |
| if ((_lrg_map.live_range_id(base) >= _lrg_map.max_lrg_id() || // (Brand new base (hence not live) or |
| !liveout.member(_lrg_map.live_range_id(base))) && // not live) AND |
| (_lrg_map.live_range_id(base) > 0) && // not a constant |
| _cfg.get_block_for_node(base) != block) { // base not def'd in blk) |
| // Base pointer is not currently live. Since I stretched |
| // the base pointer to here and it crosses basic-block |
| // boundaries, the global live info is now incorrect. |
| // Recompute live. |
| must_recompute_live = true; |
| } // End of if base pointer is not live to debug info |
| } |
| } // End of scan all live data for derived ptrs crossing GC point |
| } // End of if found a GC point |
| |
| // Make all inputs live |
| if (!n->is_Phi()) { // Phi function uses come from prior block |
| for (uint k = 1; k < n->req(); k++) { |
| uint lidx = _lrg_map.live_range_id(n->in(k)); |
| if (lidx < _lrg_map.max_lrg_id()) { |
| liveout.insert(lidx); |
| } |
| } |
| } |
| |
| } // End of forall instructions in block |
| liveout.clear(); // Free the memory used by liveout. |
| |
| } // End of forall blocks |
| _lrg_map.set_max_lrg_id(maxlrg); |
| |
| // If I created a new live range I need to recompute live |
| if (maxlrg != _ifg->_maxlrg) { |
| must_recompute_live = true; |
| } |
| |
| return must_recompute_live != 0; |
| } |
| |
| // Extend the node to LRG mapping |
| |
| void PhaseChaitin::add_reference(const Node *node, const Node *old_node) { |
| _lrg_map.extend(node->_idx, _lrg_map.live_range_id(old_node)); |
| } |
| |
| #ifndef PRODUCT |
| void PhaseChaitin::dump(const Node *n) const { |
| uint r = (n->_idx < _lrg_map.size()) ? _lrg_map.find_const(n) : 0; |
| tty->print("L%d",r); |
| if (r && n->Opcode() != Op_Phi) { |
| if( _node_regs ) { // Got a post-allocation copy of allocation? |
| tty->print("["); |
| OptoReg::Name second = get_reg_second(n); |
| if( OptoReg::is_valid(second) ) { |
| if( OptoReg::is_reg(second) ) |
| tty->print("%s:",Matcher::regName[second]); |
| else |
| tty->print("%s+%d:",OptoReg::regname(OptoReg::c_frame_pointer), reg2offset_unchecked(second)); |
| } |
| OptoReg::Name first = get_reg_first(n); |
| if( OptoReg::is_reg(first) ) |
| tty->print("%s]",Matcher::regName[first]); |
| else |
| tty->print("%s+%d]",OptoReg::regname(OptoReg::c_frame_pointer), reg2offset_unchecked(first)); |
| } else |
| n->out_RegMask().dump(); |
| } |
| tty->print("/N%d\t",n->_idx); |
| tty->print("%s === ", n->Name()); |
| uint k; |
| for (k = 0; k < n->req(); k++) { |
| Node *m = n->in(k); |
| if (!m) { |
| tty->print("_ "); |
| } |
| else { |
| uint r = (m->_idx < _lrg_map.size()) ? _lrg_map.find_const(m) : 0; |
| tty->print("L%d",r); |
| // Data MultiNode's can have projections with no real registers. |
| // Don't die while dumping them. |
| int op = n->Opcode(); |
| if( r && op != Op_Phi && op != Op_Proj && op != Op_SCMemProj) { |
| if( _node_regs ) { |
| tty->print("["); |
| OptoReg::Name second = get_reg_second(n->in(k)); |
| if( OptoReg::is_valid(second) ) { |
| if( OptoReg::is_reg(second) ) |
| tty->print("%s:",Matcher::regName[second]); |
| else |
| tty->print("%s+%d:",OptoReg::regname(OptoReg::c_frame_pointer), |
| reg2offset_unchecked(second)); |
| } |
| OptoReg::Name first = get_reg_first(n->in(k)); |
| if( OptoReg::is_reg(first) ) |
| tty->print("%s]",Matcher::regName[first]); |
| else |
| tty->print("%s+%d]",OptoReg::regname(OptoReg::c_frame_pointer), |
| reg2offset_unchecked(first)); |
| } else |
| n->in_RegMask(k).dump(); |
| } |
| tty->print("/N%d ",m->_idx); |
| } |
| } |
| if( k < n->len() && n->in(k) ) tty->print("| "); |
| for( ; k < n->len(); k++ ) { |
| Node *m = n->in(k); |
| if(!m) { |
| break; |
| } |
| uint r = (m->_idx < _lrg_map.size()) ? _lrg_map.find_const(m) : 0; |
| tty->print("L%d",r); |
| tty->print("/N%d ",m->_idx); |
| } |
| if( n->is_Mach() ) n->as_Mach()->dump_spec(tty); |
| else n->dump_spec(tty); |
| if( _spilled_once.test(n->_idx ) ) { |
| tty->print(" Spill_1"); |
| if( _spilled_twice.test(n->_idx ) ) |
| tty->print(" Spill_2"); |
| } |
| tty->print("\n"); |
| } |
| |
| void PhaseChaitin::dump(const Block *b) const { |
| b->dump_head(&_cfg); |
| |
| // For all instructions |
| for( uint j = 0; j < b->number_of_nodes(); j++ ) |
| dump(b->get_node(j)); |
| // Print live-out info at end of block |
| if( _live ) { |
| tty->print("Liveout: "); |
| IndexSet *live = _live->live(b); |
| IndexSetIterator elements(live); |
| tty->print("{"); |
| uint i; |
| while ((i = elements.next()) != 0) { |
| tty->print("L%d ", _lrg_map.find_const(i)); |
| } |
| tty->print_cr("}"); |
| } |
| tty->print("\n"); |
| } |
| |
| void PhaseChaitin::dump() const { |
| tty->print( "--- Chaitin -- argsize: %d framesize: %d ---\n", |
| _matcher._new_SP, _framesize ); |
| |
| // For all blocks |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| dump(_cfg.get_block(i)); |
| } |
| // End of per-block dump |
| tty->print("\n"); |
| |
| if (!_ifg) { |
| tty->print("(No IFG.)\n"); |
| return; |
| } |
| |
| // Dump LRG array |
| tty->print("--- Live RanGe Array ---\n"); |
| for (uint i2 = 1; i2 < _lrg_map.max_lrg_id(); i2++) { |
| tty->print("L%d: ",i2); |
| if (i2 < _ifg->_maxlrg) { |
| lrgs(i2).dump(); |
| } |
| else { |
| tty->print_cr("new LRG"); |
| } |
| } |
| tty->cr(); |
| |
| // Dump lo-degree list |
| tty->print("Lo degree: "); |
| for(uint i3 = _lo_degree; i3; i3 = lrgs(i3)._next ) |
| tty->print("L%d ",i3); |
| tty->cr(); |
| |
| // Dump lo-stk-degree list |
| tty->print("Lo stk degree: "); |
| for(uint i4 = _lo_stk_degree; i4; i4 = lrgs(i4)._next ) |
| tty->print("L%d ",i4); |
| tty->cr(); |
| |
| // Dump lo-degree list |
| tty->print("Hi degree: "); |
| for(uint i5 = _hi_degree; i5; i5 = lrgs(i5)._next ) |
| tty->print("L%d ",i5); |
| tty->cr(); |
| } |
| |
| void PhaseChaitin::dump_degree_lists() const { |
| // Dump lo-degree list |
| tty->print("Lo degree: "); |
| for( uint i = _lo_degree; i; i = lrgs(i)._next ) |
| tty->print("L%d ",i); |
| tty->cr(); |
| |
| // Dump lo-stk-degree list |
| tty->print("Lo stk degree: "); |
| for(uint i2 = _lo_stk_degree; i2; i2 = lrgs(i2)._next ) |
| tty->print("L%d ",i2); |
| tty->cr(); |
| |
| // Dump lo-degree list |
| tty->print("Hi degree: "); |
| for(uint i3 = _hi_degree; i3; i3 = lrgs(i3)._next ) |
| tty->print("L%d ",i3); |
| tty->cr(); |
| } |
| |
| void PhaseChaitin::dump_simplified() const { |
| tty->print("Simplified: "); |
| for( uint i = _simplified; i; i = lrgs(i)._next ) |
| tty->print("L%d ",i); |
| tty->cr(); |
| } |
| |
| static char *print_reg( OptoReg::Name reg, const PhaseChaitin *pc, char *buf ) { |
| if ((int)reg < 0) |
| sprintf(buf, "<OptoReg::%d>", (int)reg); |
| else if (OptoReg::is_reg(reg)) |
| strcpy(buf, Matcher::regName[reg]); |
| else |
| sprintf(buf,"%s + #%d",OptoReg::regname(OptoReg::c_frame_pointer), |
| pc->reg2offset(reg)); |
| return buf+strlen(buf); |
| } |
| |
| // Dump a register name into a buffer. Be intelligent if we get called |
| // before allocation is complete. |
| char *PhaseChaitin::dump_register( const Node *n, char *buf ) const { |
| if( !this ) { // Not got anything? |
| sprintf(buf,"N%d",n->_idx); // Then use Node index |
| } else if( _node_regs ) { |
| // Post allocation, use direct mappings, no LRG info available |
| print_reg( get_reg_first(n), this, buf ); |
| } else { |
| uint lidx = _lrg_map.find_const(n); // Grab LRG number |
| if( !_ifg ) { |
| sprintf(buf,"L%d",lidx); // No register binding yet |
| } else if( !lidx ) { // Special, not allocated value |
| strcpy(buf,"Special"); |
| } else { |
| if (lrgs(lidx)._is_vector) { |
| if (lrgs(lidx).mask().is_bound_set(lrgs(lidx).num_regs())) |
| print_reg( lrgs(lidx).reg(), this, buf ); // a bound machine register |
| else |
| sprintf(buf,"L%d",lidx); // No register binding yet |
| } else if( (lrgs(lidx).num_regs() == 1) |
| ? lrgs(lidx).mask().is_bound1() |
| : lrgs(lidx).mask().is_bound_pair() ) { |
| // Hah! We have a bound machine register |
| print_reg( lrgs(lidx).reg(), this, buf ); |
| } else { |
| sprintf(buf,"L%d",lidx); // No register binding yet |
| } |
| } |
| } |
| return buf+strlen(buf); |
| } |
| |
| void PhaseChaitin::dump_for_spill_split_recycle() const { |
| if( WizardMode && (PrintCompilation || PrintOpto) ) { |
| // Display which live ranges need to be split and the allocator's state |
| tty->print_cr("Graph-Coloring Iteration %d will split the following live ranges", _trip_cnt); |
| for (uint bidx = 1; bidx < _lrg_map.max_lrg_id(); bidx++) { |
| if( lrgs(bidx).alive() && lrgs(bidx).reg() >= LRG::SPILL_REG ) { |
| tty->print("L%d: ", bidx); |
| lrgs(bidx).dump(); |
| } |
| } |
| tty->cr(); |
| dump(); |
| } |
| } |
| |
| void PhaseChaitin::dump_frame() const { |
| const char *fp = OptoReg::regname(OptoReg::c_frame_pointer); |
| const TypeTuple *domain = C->tf()->domain(); |
| const int argcnt = domain->cnt() - TypeFunc::Parms; |
| |
| // Incoming arguments in registers dump |
| for( int k = 0; k < argcnt; k++ ) { |
| OptoReg::Name parmreg = _matcher._parm_regs[k].first(); |
| if( OptoReg::is_reg(parmreg)) { |
| const char *reg_name = OptoReg::regname(parmreg); |
| tty->print("#r%3.3d %s", parmreg, reg_name); |
| parmreg = _matcher._parm_regs[k].second(); |
| if( OptoReg::is_reg(parmreg)) { |
| tty->print(":%s", OptoReg::regname(parmreg)); |
| } |
| tty->print(" : parm %d: ", k); |
| domain->field_at(k + TypeFunc::Parms)->dump(); |
| tty->cr(); |
| } |
| } |
| |
| // Check for un-owned padding above incoming args |
| OptoReg::Name reg = _matcher._new_SP; |
| if( reg > _matcher._in_arg_limit ) { |
| reg = OptoReg::add(reg, -1); |
| tty->print_cr("#r%3.3d %s+%2d: pad0, owned by CALLER", reg, fp, reg2offset_unchecked(reg)); |
| } |
| |
| // Incoming argument area dump |
| OptoReg::Name begin_in_arg = OptoReg::add(_matcher._old_SP,C->out_preserve_stack_slots()); |
| while( reg > begin_in_arg ) { |
| reg = OptoReg::add(reg, -1); |
| tty->print("#r%3.3d %s+%2d: ",reg,fp,reg2offset_unchecked(reg)); |
| int j; |
| for( j = 0; j < argcnt; j++) { |
| if( _matcher._parm_regs[j].first() == reg || |
| _matcher._parm_regs[j].second() == reg ) { |
| tty->print("parm %d: ",j); |
| domain->field_at(j + TypeFunc::Parms)->dump(); |
| tty->cr(); |
| break; |
| } |
| } |
| if( j >= argcnt ) |
| tty->print_cr("HOLE, owned by SELF"); |
| } |
| |
| // Old outgoing preserve area |
| while( reg > _matcher._old_SP ) { |
| reg = OptoReg::add(reg, -1); |
| tty->print_cr("#r%3.3d %s+%2d: old out preserve",reg,fp,reg2offset_unchecked(reg)); |
| } |
| |
| // Old SP |
| tty->print_cr("# -- Old %s -- Framesize: %d --",fp, |
| reg2offset_unchecked(OptoReg::add(_matcher._old_SP,-1)) - reg2offset_unchecked(_matcher._new_SP)+jintSize); |
| |
| // Preserve area dump |
| int fixed_slots = C->fixed_slots(); |
| OptoReg::Name begin_in_preserve = OptoReg::add(_matcher._old_SP, -(int)C->in_preserve_stack_slots()); |
| OptoReg::Name return_addr = _matcher.return_addr(); |
| |
| reg = OptoReg::add(reg, -1); |
| while (OptoReg::is_stack(reg)) { |
| tty->print("#r%3.3d %s+%2d: ",reg,fp,reg2offset_unchecked(reg)); |
| if (return_addr == reg) { |
| tty->print_cr("return address"); |
| } else if (reg >= begin_in_preserve) { |
| // Preserved slots are present on x86 |
| if (return_addr == OptoReg::add(reg, VMRegImpl::slots_per_word)) |
| tty->print_cr("saved fp register"); |
| else if (return_addr == OptoReg::add(reg, 2*VMRegImpl::slots_per_word) && |
| VerifyStackAtCalls) |
| tty->print_cr("0xBADB100D +VerifyStackAtCalls"); |
| else |
| tty->print_cr("in_preserve"); |
| } else if ((int)OptoReg::reg2stack(reg) < fixed_slots) { |
| tty->print_cr("Fixed slot %d", OptoReg::reg2stack(reg)); |
| } else { |
| tty->print_cr("pad2, stack alignment"); |
| } |
| reg = OptoReg::add(reg, -1); |
| } |
| |
| // Spill area dump |
| reg = OptoReg::add(_matcher._new_SP, _framesize ); |
| while( reg > _matcher._out_arg_limit ) { |
| reg = OptoReg::add(reg, -1); |
| tty->print_cr("#r%3.3d %s+%2d: spill",reg,fp,reg2offset_unchecked(reg)); |
| } |
| |
| // Outgoing argument area dump |
| while( reg > OptoReg::add(_matcher._new_SP, C->out_preserve_stack_slots()) ) { |
| reg = OptoReg::add(reg, -1); |
| tty->print_cr("#r%3.3d %s+%2d: outgoing argument",reg,fp,reg2offset_unchecked(reg)); |
| } |
| |
| // Outgoing new preserve area |
| while( reg > _matcher._new_SP ) { |
| reg = OptoReg::add(reg, -1); |
| tty->print_cr("#r%3.3d %s+%2d: new out preserve",reg,fp,reg2offset_unchecked(reg)); |
| } |
| tty->print_cr("#"); |
| } |
| |
| void PhaseChaitin::dump_bb( uint pre_order ) const { |
| tty->print_cr("---dump of B%d---",pre_order); |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| Block* block = _cfg.get_block(i); |
| if (block->_pre_order == pre_order) { |
| dump(block); |
| } |
| } |
| } |
| |
| void PhaseChaitin::dump_lrg( uint lidx, bool defs_only ) const { |
| tty->print_cr("---dump of L%d---",lidx); |
| |
| if (_ifg) { |
| if (lidx >= _lrg_map.max_lrg_id()) { |
| tty->print("Attempt to print live range index beyond max live range.\n"); |
| return; |
| } |
| tty->print("L%d: ",lidx); |
| if (lidx < _ifg->_maxlrg) { |
| lrgs(lidx).dump(); |
| } else { |
| tty->print_cr("new LRG"); |
| } |
| } |
| if( _ifg && lidx < _ifg->_maxlrg) { |
| tty->print("Neighbors: %d - ", _ifg->neighbor_cnt(lidx)); |
| _ifg->neighbors(lidx)->dump(); |
| tty->cr(); |
| } |
| // For all blocks |
| for (uint i = 0; i < _cfg.number_of_blocks(); i++) { |
| Block* block = _cfg.get_block(i); |
| int dump_once = 0; |
| |
| // For all instructions |
| for( uint j = 0; j < block->number_of_nodes(); j++ ) { |
| Node *n = block->get_node(j); |
| if (_lrg_map.find_const(n) == lidx) { |
| if (!dump_once++) { |
| tty->cr(); |
| block->dump_head(&_cfg); |
| } |
| dump(n); |
| continue; |
| } |
| if (!defs_only) { |
| uint cnt = n->req(); |
| for( uint k = 1; k < cnt; k++ ) { |
| Node *m = n->in(k); |
| if (!m) { |
| continue; // be robust in the dumper |
| } |
| if (_lrg_map.find_const(m) == lidx) { |
| if (!dump_once++) { |
| tty->cr(); |
| block->dump_head(&_cfg); |
| } |
| dump(n); |
| } |
| } |
| } |
| } |
| } // End of per-block dump |
| tty->cr(); |
| } |
| #endif // not PRODUCT |
| |
| int PhaseChaitin::_final_loads = 0; |
| int PhaseChaitin::_final_stores = 0; |
| int PhaseChaitin::_final_memoves= 0; |
| int PhaseChaitin::_final_copies = 0; |
| double PhaseChaitin::_final_load_cost = 0; |
| double PhaseChaitin::_final_store_cost = 0; |
| double PhaseChaitin::_final_memove_cost= 0; |
| double PhaseChaitin::_final_copy_cost = 0; |
| int PhaseChaitin::_conserv_coalesce = 0; |
| int PhaseChaitin::_conserv_coalesce_pair = 0; |
| int PhaseChaitin::_conserv_coalesce_trie = 0; |
| int PhaseChaitin::_conserv_coalesce_quad = 0; |
| int PhaseChaitin::_post_alloc = 0; |
| int PhaseChaitin::_lost_opp_pp_coalesce = 0; |
| int PhaseChaitin::_lost_opp_cflow_coalesce = 0; |
| int PhaseChaitin::_used_cisc_instructions = 0; |
| int PhaseChaitin::_unused_cisc_instructions = 0; |
| int PhaseChaitin::_allocator_attempts = 0; |
| int PhaseChaitin::_allocator_successes = 0; |
| |
| #ifndef PRODUCT |
| uint PhaseChaitin::_high_pressure = 0; |
| uint PhaseChaitin::_low_pressure = 0; |
| |
| void PhaseChaitin::print_chaitin_statistics() { |
| tty->print_cr("Inserted %d spill loads, %d spill stores, %d mem-mem moves and %d copies.", _final_loads, _final_stores, _final_memoves, _final_copies); |
| tty->print_cr("Total load cost= %6.0f, store cost = %6.0f, mem-mem cost = %5.2f, copy cost = %5.0f.", _final_load_cost, _final_store_cost, _final_memove_cost, _final_copy_cost); |
| tty->print_cr("Adjusted spill cost = %7.0f.", |
| _final_load_cost*4.0 + _final_store_cost * 2.0 + |
| _final_copy_cost*1.0 + _final_memove_cost*12.0); |
| tty->print("Conservatively coalesced %d copies, %d pairs", |
| _conserv_coalesce, _conserv_coalesce_pair); |
| if( _conserv_coalesce_trie || _conserv_coalesce_quad ) |
| tty->print(", %d tries, %d quads", _conserv_coalesce_trie, _conserv_coalesce_quad); |
| tty->print_cr(", %d post alloc.", _post_alloc); |
| if( _lost_opp_pp_coalesce || _lost_opp_cflow_coalesce ) |
| tty->print_cr("Lost coalesce opportunity, %d private-private, and %d cflow interfered.", |
| _lost_opp_pp_coalesce, _lost_opp_cflow_coalesce ); |
| if( _used_cisc_instructions || _unused_cisc_instructions ) |
| tty->print_cr("Used cisc instruction %d, remained in register %d", |
| _used_cisc_instructions, _unused_cisc_instructions); |
| if( _allocator_successes != 0 ) |
| tty->print_cr("Average allocation trips %f", (float)_allocator_attempts/(float)_allocator_successes); |
| tty->print_cr("High Pressure Blocks = %d, Low Pressure Blocks = %d", _high_pressure, _low_pressure); |
| } |
| #endif // not PRODUCT |