| /* |
| * Copyright (c) 2001, 2014, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #ifndef __clang_major__ |
| #define ATTRIBUTE_PRINTF(x,y) // FIXME, formats are a mess. |
| #endif |
| |
| #include "precompiled.hpp" |
| #include "gc_implementation/g1/concurrentG1Refine.hpp" |
| #include "gc_implementation/g1/concurrentMark.hpp" |
| #include "gc_implementation/g1/concurrentMarkThread.inline.hpp" |
| #include "gc_implementation/g1/g1CollectedHeap.inline.hpp" |
| #include "gc_implementation/g1/g1CollectorPolicy.hpp" |
| #include "gc_implementation/g1/g1ErgoVerbose.hpp" |
| #include "gc_implementation/g1/g1GCPhaseTimes.hpp" |
| #include "gc_implementation/g1/g1Log.hpp" |
| #include "gc_implementation/g1/heapRegionRemSet.hpp" |
| #include "gc_implementation/shared/gcPolicyCounters.hpp" |
| #include "runtime/arguments.hpp" |
| #include "runtime/java.hpp" |
| #include "runtime/mutexLocker.hpp" |
| #include "utilities/debug.hpp" |
| |
| // Different defaults for different number of GC threads |
| // They were chosen by running GCOld and SPECjbb on debris with different |
| // numbers of GC threads and choosing them based on the results |
| |
| // all the same |
| static double rs_length_diff_defaults[] = { |
| 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 |
| }; |
| |
| static double cost_per_card_ms_defaults[] = { |
| 0.01, 0.005, 0.005, 0.003, 0.003, 0.002, 0.002, 0.0015 |
| }; |
| |
| // all the same |
| static double young_cards_per_entry_ratio_defaults[] = { |
| 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 |
| }; |
| |
| static double cost_per_entry_ms_defaults[] = { |
| 0.015, 0.01, 0.01, 0.008, 0.008, 0.0055, 0.0055, 0.005 |
| }; |
| |
| static double cost_per_byte_ms_defaults[] = { |
| 0.00006, 0.00003, 0.00003, 0.000015, 0.000015, 0.00001, 0.00001, 0.000009 |
| }; |
| |
| // these should be pretty consistent |
| static double constant_other_time_ms_defaults[] = { |
| 5.0, 5.0, 5.0, 5.0, 5.0, 5.0, 5.0, 5.0 |
| }; |
| |
| |
| static double young_other_cost_per_region_ms_defaults[] = { |
| 0.3, 0.2, 0.2, 0.15, 0.15, 0.12, 0.12, 0.1 |
| }; |
| |
| static double non_young_other_cost_per_region_ms_defaults[] = { |
| 1.0, 0.7, 0.7, 0.5, 0.5, 0.42, 0.42, 0.30 |
| }; |
| |
| G1CollectorPolicy::G1CollectorPolicy() : |
| _parallel_gc_threads(G1CollectedHeap::use_parallel_gc_threads() |
| ? ParallelGCThreads : 1), |
| |
| _recent_gc_times_ms(new TruncatedSeq(NumPrevPausesForHeuristics)), |
| _stop_world_start(0.0), |
| |
| _concurrent_mark_remark_times_ms(new TruncatedSeq(NumPrevPausesForHeuristics)), |
| _concurrent_mark_cleanup_times_ms(new TruncatedSeq(NumPrevPausesForHeuristics)), |
| |
| _alloc_rate_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _prev_collection_pause_end_ms(0.0), |
| _rs_length_diff_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _cost_per_card_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _young_cards_per_entry_ratio_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _mixed_cards_per_entry_ratio_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _cost_per_entry_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _mixed_cost_per_entry_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _cost_per_byte_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _cost_per_byte_ms_during_cm_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _constant_other_time_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _young_other_cost_per_region_ms_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _non_young_other_cost_per_region_ms_seq( |
| new TruncatedSeq(TruncatedSeqLength)), |
| |
| _pending_cards_seq(new TruncatedSeq(TruncatedSeqLength)), |
| _rs_lengths_seq(new TruncatedSeq(TruncatedSeqLength)), |
| |
| _pause_time_target_ms((double) MaxGCPauseMillis), |
| |
| _gcs_are_young(true), |
| |
| _during_marking(false), |
| _in_marking_window(false), |
| _in_marking_window_im(false), |
| |
| _recent_prev_end_times_for_all_gcs_sec( |
| new TruncatedSeq(NumPrevPausesForHeuristics)), |
| |
| _recent_avg_pause_time_ratio(0.0), |
| |
| _initiate_conc_mark_if_possible(false), |
| _during_initial_mark_pause(false), |
| _last_young_gc(false), |
| _last_gc_was_young(false), |
| |
| _eden_used_bytes_before_gc(0), |
| _survivor_used_bytes_before_gc(0), |
| _heap_used_bytes_before_gc(0), |
| _metaspace_used_bytes_before_gc(0), |
| _eden_capacity_bytes_before_gc(0), |
| _heap_capacity_bytes_before_gc(0), |
| |
| _eden_cset_region_length(0), |
| _survivor_cset_region_length(0), |
| _old_cset_region_length(0), |
| |
| _collection_set(NULL), |
| _collection_set_bytes_used_before(0), |
| |
| // Incremental CSet attributes |
| _inc_cset_build_state(Inactive), |
| _inc_cset_head(NULL), |
| _inc_cset_tail(NULL), |
| _inc_cset_bytes_used_before(0), |
| _inc_cset_max_finger(NULL), |
| _inc_cset_recorded_rs_lengths(0), |
| _inc_cset_recorded_rs_lengths_diffs(0), |
| _inc_cset_predicted_elapsed_time_ms(0.0), |
| _inc_cset_predicted_elapsed_time_ms_diffs(0.0), |
| |
| #ifdef _MSC_VER // the use of 'this' below gets a warning, make it go away |
| #pragma warning( disable:4355 ) // 'this' : used in base member initializer list |
| #endif // _MSC_VER |
| |
| _short_lived_surv_rate_group(new SurvRateGroup(this, "Short Lived", |
| G1YoungSurvRateNumRegionsSummary)), |
| _survivor_surv_rate_group(new SurvRateGroup(this, "Survivor", |
| G1YoungSurvRateNumRegionsSummary)), |
| // add here any more surv rate groups |
| _recorded_survivor_regions(0), |
| _recorded_survivor_head(NULL), |
| _recorded_survivor_tail(NULL), |
| _survivors_age_table(true), |
| |
| _gc_overhead_perc(0.0) { |
| |
| // Set up the region size and associated fields. Given that the |
| // policy is created before the heap, we have to set this up here, |
| // so it's done as soon as possible. |
| |
| // It would have been natural to pass initial_heap_byte_size() and |
| // max_heap_byte_size() to setup_heap_region_size() but those have |
| // not been set up at this point since they should be aligned with |
| // the region size. So, there is a circular dependency here. We base |
| // the region size on the heap size, but the heap size should be |
| // aligned with the region size. To get around this we use the |
| // unaligned values for the heap. |
| HeapRegion::setup_heap_region_size(InitialHeapSize, MaxHeapSize); |
| HeapRegionRemSet::setup_remset_size(); |
| |
| G1ErgoVerbose::initialize(); |
| if (PrintAdaptiveSizePolicy) { |
| // Currently, we only use a single switch for all the heuristics. |
| G1ErgoVerbose::set_enabled(true); |
| // Given that we don't currently have a verboseness level |
| // parameter, we'll hardcode this to high. This can be easily |
| // changed in the future. |
| G1ErgoVerbose::set_level(ErgoHigh); |
| } else { |
| G1ErgoVerbose::set_enabled(false); |
| } |
| |
| // Verify PLAB sizes |
| const size_t region_size = HeapRegion::GrainWords; |
| if (YoungPLABSize > region_size || OldPLABSize > region_size) { |
| char buffer[128]; |
| jio_snprintf(buffer, sizeof(buffer), "%sPLABSize should be at most "SIZE_FORMAT, |
| OldPLABSize > region_size ? "Old" : "Young", region_size); |
| vm_exit_during_initialization(buffer); |
| } |
| |
| _recent_prev_end_times_for_all_gcs_sec->add(os::elapsedTime()); |
| _prev_collection_pause_end_ms = os::elapsedTime() * 1000.0; |
| |
| _phase_times = new G1GCPhaseTimes(_parallel_gc_threads); |
| |
| int index = MIN2(_parallel_gc_threads - 1, 7); |
| |
| _rs_length_diff_seq->add(rs_length_diff_defaults[index]); |
| _cost_per_card_ms_seq->add(cost_per_card_ms_defaults[index]); |
| _young_cards_per_entry_ratio_seq->add( |
| young_cards_per_entry_ratio_defaults[index]); |
| _cost_per_entry_ms_seq->add(cost_per_entry_ms_defaults[index]); |
| _cost_per_byte_ms_seq->add(cost_per_byte_ms_defaults[index]); |
| _constant_other_time_ms_seq->add(constant_other_time_ms_defaults[index]); |
| _young_other_cost_per_region_ms_seq->add( |
| young_other_cost_per_region_ms_defaults[index]); |
| _non_young_other_cost_per_region_ms_seq->add( |
| non_young_other_cost_per_region_ms_defaults[index]); |
| |
| // Below, we might need to calculate the pause time target based on |
| // the pause interval. When we do so we are going to give G1 maximum |
| // flexibility and allow it to do pauses when it needs to. So, we'll |
| // arrange that the pause interval to be pause time target + 1 to |
| // ensure that a) the pause time target is maximized with respect to |
| // the pause interval and b) we maintain the invariant that pause |
| // time target < pause interval. If the user does not want this |
| // maximum flexibility, they will have to set the pause interval |
| // explicitly. |
| |
| // First make sure that, if either parameter is set, its value is |
| // reasonable. |
| if (!FLAG_IS_DEFAULT(MaxGCPauseMillis)) { |
| if (MaxGCPauseMillis < 1) { |
| vm_exit_during_initialization("MaxGCPauseMillis should be " |
| "greater than 0"); |
| } |
| } |
| if (!FLAG_IS_DEFAULT(GCPauseIntervalMillis)) { |
| if (GCPauseIntervalMillis < 1) { |
| vm_exit_during_initialization("GCPauseIntervalMillis should be " |
| "greater than 0"); |
| } |
| } |
| |
| // Then, if the pause time target parameter was not set, set it to |
| // the default value. |
| if (FLAG_IS_DEFAULT(MaxGCPauseMillis)) { |
| if (FLAG_IS_DEFAULT(GCPauseIntervalMillis)) { |
| // The default pause time target in G1 is 200ms |
| FLAG_SET_DEFAULT(MaxGCPauseMillis, 200); |
| } else { |
| // We do not allow the pause interval to be set without the |
| // pause time target |
| vm_exit_during_initialization("GCPauseIntervalMillis cannot be set " |
| "without setting MaxGCPauseMillis"); |
| } |
| } |
| |
| // Then, if the interval parameter was not set, set it according to |
| // the pause time target (this will also deal with the case when the |
| // pause time target is the default value). |
| if (FLAG_IS_DEFAULT(GCPauseIntervalMillis)) { |
| FLAG_SET_DEFAULT(GCPauseIntervalMillis, MaxGCPauseMillis + 1); |
| } |
| |
| // Finally, make sure that the two parameters are consistent. |
| if (MaxGCPauseMillis >= GCPauseIntervalMillis) { |
| char buffer[256]; |
| jio_snprintf(buffer, 256, |
| "MaxGCPauseMillis (%u) should be less than " |
| "GCPauseIntervalMillis (%u)", |
| MaxGCPauseMillis, GCPauseIntervalMillis); |
| vm_exit_during_initialization(buffer); |
| } |
| |
| double max_gc_time = (double) MaxGCPauseMillis / 1000.0; |
| double time_slice = (double) GCPauseIntervalMillis / 1000.0; |
| _mmu_tracker = new G1MMUTrackerQueue(time_slice, max_gc_time); |
| |
| uintx confidence_perc = G1ConfidencePercent; |
| // Put an artificial ceiling on this so that it's not set to a silly value. |
| if (confidence_perc > 100) { |
| confidence_perc = 100; |
| warning("G1ConfidencePercent is set to a value that is too large, " |
| "it's been updated to %u", confidence_perc); |
| } |
| _sigma = (double) confidence_perc / 100.0; |
| |
| // start conservatively (around 50ms is about right) |
| _concurrent_mark_remark_times_ms->add(0.05); |
| _concurrent_mark_cleanup_times_ms->add(0.20); |
| _tenuring_threshold = MaxTenuringThreshold; |
| // _max_survivor_regions will be calculated by |
| // update_young_list_target_length() during initialization. |
| _max_survivor_regions = 0; |
| |
| assert(GCTimeRatio > 0, |
| "we should have set it to a default value set_g1_gc_flags() " |
| "if a user set it to 0"); |
| _gc_overhead_perc = 100.0 * (1.0 / (1.0 + GCTimeRatio)); |
| |
| uintx reserve_perc = G1ReservePercent; |
| // Put an artificial ceiling on this so that it's not set to a silly value. |
| if (reserve_perc > 50) { |
| reserve_perc = 50; |
| warning("G1ReservePercent is set to a value that is too large, " |
| "it's been updated to %u", reserve_perc); |
| } |
| _reserve_factor = (double) reserve_perc / 100.0; |
| // This will be set when the heap is expanded |
| // for the first time during initialization. |
| _reserve_regions = 0; |
| |
| _collectionSetChooser = new CollectionSetChooser(); |
| } |
| |
| void G1CollectorPolicy::initialize_alignments() { |
| _space_alignment = HeapRegion::GrainBytes; |
| size_t card_table_alignment = GenRemSet::max_alignment_constraint(GenRemSet::CardTable); |
| size_t page_size = UseLargePages ? os::large_page_size() : os::vm_page_size(); |
| _heap_alignment = MAX3(card_table_alignment, _space_alignment, page_size); |
| } |
| |
| void G1CollectorPolicy::initialize_flags() { |
| if (G1HeapRegionSize != HeapRegion::GrainBytes) { |
| FLAG_SET_ERGO(uintx, G1HeapRegionSize, HeapRegion::GrainBytes); |
| } |
| |
| if (SurvivorRatio < 1) { |
| vm_exit_during_initialization("Invalid survivor ratio specified"); |
| } |
| CollectorPolicy::initialize_flags(); |
| _young_gen_sizer = new G1YoungGenSizer(); // Must be after call to initialize_flags |
| } |
| |
| void G1CollectorPolicy::post_heap_initialize() { |
| uintx max_regions = G1CollectedHeap::heap()->max_regions(); |
| size_t max_young_size = (size_t)_young_gen_sizer->max_young_length(max_regions) * HeapRegion::GrainBytes; |
| if (max_young_size != MaxNewSize) { |
| FLAG_SET_ERGO(uintx, MaxNewSize, max_young_size); |
| } |
| } |
| |
| G1YoungGenSizer::G1YoungGenSizer() : _sizer_kind(SizerDefaults), _adaptive_size(true), |
| _min_desired_young_length(0), _max_desired_young_length(0) { |
| if (FLAG_IS_CMDLINE(NewRatio)) { |
| if (FLAG_IS_CMDLINE(NewSize) || FLAG_IS_CMDLINE(MaxNewSize)) { |
| warning("-XX:NewSize and -XX:MaxNewSize override -XX:NewRatio"); |
| } else { |
| _sizer_kind = SizerNewRatio; |
| _adaptive_size = false; |
| return; |
| } |
| } |
| |
| if (NewSize > MaxNewSize) { |
| if (FLAG_IS_CMDLINE(MaxNewSize)) { |
| warning("NewSize (" SIZE_FORMAT "k) is greater than the MaxNewSize (" SIZE_FORMAT "k). " |
| "A new max generation size of " SIZE_FORMAT "k will be used.", |
| NewSize/K, MaxNewSize/K, NewSize/K); |
| } |
| MaxNewSize = NewSize; |
| } |
| |
| if (FLAG_IS_CMDLINE(NewSize)) { |
| _min_desired_young_length = MAX2((uint) (NewSize / HeapRegion::GrainBytes), |
| 1U); |
| if (FLAG_IS_CMDLINE(MaxNewSize)) { |
| _max_desired_young_length = |
| MAX2((uint) (MaxNewSize / HeapRegion::GrainBytes), |
| 1U); |
| _sizer_kind = SizerMaxAndNewSize; |
| _adaptive_size = _min_desired_young_length == _max_desired_young_length; |
| } else { |
| _sizer_kind = SizerNewSizeOnly; |
| } |
| } else if (FLAG_IS_CMDLINE(MaxNewSize)) { |
| _max_desired_young_length = |
| MAX2((uint) (MaxNewSize / HeapRegion::GrainBytes), |
| 1U); |
| _sizer_kind = SizerMaxNewSizeOnly; |
| } |
| } |
| |
| uint G1YoungGenSizer::calculate_default_min_length(uint new_number_of_heap_regions) { |
| uint default_value = (new_number_of_heap_regions * G1NewSizePercent) / 100; |
| return MAX2(1U, default_value); |
| } |
| |
| uint G1YoungGenSizer::calculate_default_max_length(uint new_number_of_heap_regions) { |
| uint default_value = (new_number_of_heap_regions * G1MaxNewSizePercent) / 100; |
| return MAX2(1U, default_value); |
| } |
| |
| void G1YoungGenSizer::recalculate_min_max_young_length(uint number_of_heap_regions, uint* min_young_length, uint* max_young_length) { |
| assert(number_of_heap_regions > 0, "Heap must be initialized"); |
| |
| switch (_sizer_kind) { |
| case SizerDefaults: |
| *min_young_length = calculate_default_min_length(number_of_heap_regions); |
| *max_young_length = calculate_default_max_length(number_of_heap_regions); |
| break; |
| case SizerNewSizeOnly: |
| *max_young_length = calculate_default_max_length(number_of_heap_regions); |
| *max_young_length = MAX2(*min_young_length, *max_young_length); |
| break; |
| case SizerMaxNewSizeOnly: |
| *min_young_length = calculate_default_min_length(number_of_heap_regions); |
| *min_young_length = MIN2(*min_young_length, *max_young_length); |
| break; |
| case SizerMaxAndNewSize: |
| // Do nothing. Values set on the command line, don't update them at runtime. |
| break; |
| case SizerNewRatio: |
| *min_young_length = number_of_heap_regions / (NewRatio + 1); |
| *max_young_length = *min_young_length; |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| |
| assert(*min_young_length <= *max_young_length, "Invalid min/max young gen size values"); |
| } |
| |
| uint G1YoungGenSizer::max_young_length(uint number_of_heap_regions) { |
| // We need to pass the desired values because recalculation may not update these |
| // values in some cases. |
| uint temp = _min_desired_young_length; |
| uint result = _max_desired_young_length; |
| recalculate_min_max_young_length(number_of_heap_regions, &temp, &result); |
| return result; |
| } |
| |
| void G1YoungGenSizer::heap_size_changed(uint new_number_of_heap_regions) { |
| recalculate_min_max_young_length(new_number_of_heap_regions, &_min_desired_young_length, |
| &_max_desired_young_length); |
| } |
| |
| void G1CollectorPolicy::init() { |
| // Set aside an initial future to_space. |
| _g1 = G1CollectedHeap::heap(); |
| |
| assert(Heap_lock->owned_by_self(), "Locking discipline."); |
| |
| initialize_gc_policy_counters(); |
| |
| if (adaptive_young_list_length()) { |
| _young_list_fixed_length = 0; |
| } else { |
| _young_list_fixed_length = _young_gen_sizer->min_desired_young_length(); |
| } |
| _free_regions_at_end_of_collection = _g1->num_free_regions(); |
| update_young_list_target_length(); |
| |
| // We may immediately start allocating regions and placing them on the |
| // collection set list. Initialize the per-collection set info |
| start_incremental_cset_building(); |
| } |
| |
| // Create the jstat counters for the policy. |
| void G1CollectorPolicy::initialize_gc_policy_counters() { |
| _gc_policy_counters = new GCPolicyCounters("GarbageFirst", 1, 3); |
| } |
| |
| bool G1CollectorPolicy::predict_will_fit(uint young_length, |
| double base_time_ms, |
| uint base_free_regions, |
| double target_pause_time_ms) { |
| if (young_length >= base_free_regions) { |
| // end condition 1: not enough space for the young regions |
| return false; |
| } |
| |
| double accum_surv_rate = accum_yg_surv_rate_pred((int) young_length - 1); |
| size_t bytes_to_copy = |
| (size_t) (accum_surv_rate * (double) HeapRegion::GrainBytes); |
| double copy_time_ms = predict_object_copy_time_ms(bytes_to_copy); |
| double young_other_time_ms = predict_young_other_time_ms(young_length); |
| double pause_time_ms = base_time_ms + copy_time_ms + young_other_time_ms; |
| if (pause_time_ms > target_pause_time_ms) { |
| // end condition 2: prediction is over the target pause time |
| return false; |
| } |
| |
| size_t free_bytes = |
| (base_free_regions - young_length) * HeapRegion::GrainBytes; |
| if ((2.0 * sigma()) * (double) bytes_to_copy > (double) free_bytes) { |
| // end condition 3: out-of-space (conservatively!) |
| return false; |
| } |
| |
| // success! |
| return true; |
| } |
| |
| void G1CollectorPolicy::record_new_heap_size(uint new_number_of_regions) { |
| // re-calculate the necessary reserve |
| double reserve_regions_d = (double) new_number_of_regions * _reserve_factor; |
| // We use ceiling so that if reserve_regions_d is > 0.0 (but |
| // smaller than 1.0) we'll get 1. |
| _reserve_regions = (uint) ceil(reserve_regions_d); |
| |
| _young_gen_sizer->heap_size_changed(new_number_of_regions); |
| } |
| |
| uint G1CollectorPolicy::calculate_young_list_desired_min_length( |
| uint base_min_length) { |
| uint desired_min_length = 0; |
| if (adaptive_young_list_length()) { |
| if (_alloc_rate_ms_seq->num() > 3) { |
| double now_sec = os::elapsedTime(); |
| double when_ms = _mmu_tracker->when_max_gc_sec(now_sec) * 1000.0; |
| double alloc_rate_ms = predict_alloc_rate_ms(); |
| desired_min_length = (uint) ceil(alloc_rate_ms * when_ms); |
| } else { |
| // otherwise we don't have enough info to make the prediction |
| } |
| } |
| desired_min_length += base_min_length; |
| // make sure we don't go below any user-defined minimum bound |
| return MAX2(_young_gen_sizer->min_desired_young_length(), desired_min_length); |
| } |
| |
| uint G1CollectorPolicy::calculate_young_list_desired_max_length() { |
| // Here, we might want to also take into account any additional |
| // constraints (i.e., user-defined minimum bound). Currently, we |
| // effectively don't set this bound. |
| return _young_gen_sizer->max_desired_young_length(); |
| } |
| |
| void G1CollectorPolicy::update_young_list_target_length(size_t rs_lengths) { |
| if (rs_lengths == (size_t) -1) { |
| // if it's set to the default value (-1), we should predict it; |
| // otherwise, use the given value. |
| rs_lengths = (size_t) get_new_prediction(_rs_lengths_seq); |
| } |
| |
| // Calculate the absolute and desired min bounds. |
| |
| // This is how many young regions we already have (currently: the survivors). |
| uint base_min_length = recorded_survivor_regions(); |
| // This is the absolute minimum young length, which ensures that we |
| // can allocate one eden region in the worst-case. |
| uint absolute_min_length = base_min_length + 1; |
| uint desired_min_length = |
| calculate_young_list_desired_min_length(base_min_length); |
| if (desired_min_length < absolute_min_length) { |
| desired_min_length = absolute_min_length; |
| } |
| |
| // Calculate the absolute and desired max bounds. |
| |
| // We will try our best not to "eat" into the reserve. |
| uint absolute_max_length = 0; |
| if (_free_regions_at_end_of_collection > _reserve_regions) { |
| absolute_max_length = _free_regions_at_end_of_collection - _reserve_regions; |
| } |
| uint desired_max_length = calculate_young_list_desired_max_length(); |
| if (desired_max_length > absolute_max_length) { |
| desired_max_length = absolute_max_length; |
| } |
| |
| uint young_list_target_length = 0; |
| if (adaptive_young_list_length()) { |
| if (gcs_are_young()) { |
| young_list_target_length = |
| calculate_young_list_target_length(rs_lengths, |
| base_min_length, |
| desired_min_length, |
| desired_max_length); |
| _rs_lengths_prediction = rs_lengths; |
| } else { |
| // Don't calculate anything and let the code below bound it to |
| // the desired_min_length, i.e., do the next GC as soon as |
| // possible to maximize how many old regions we can add to it. |
| } |
| } else { |
| // The user asked for a fixed young gen so we'll fix the young gen |
| // whether the next GC is young or mixed. |
| young_list_target_length = _young_list_fixed_length; |
| } |
| |
| // Make sure we don't go over the desired max length, nor under the |
| // desired min length. In case they clash, desired_min_length wins |
| // which is why that test is second. |
| if (young_list_target_length > desired_max_length) { |
| young_list_target_length = desired_max_length; |
| } |
| if (young_list_target_length < desired_min_length) { |
| young_list_target_length = desired_min_length; |
| } |
| |
| assert(young_list_target_length > recorded_survivor_regions(), |
| "we should be able to allocate at least one eden region"); |
| assert(young_list_target_length >= absolute_min_length, "post-condition"); |
| _young_list_target_length = young_list_target_length; |
| |
| update_max_gc_locker_expansion(); |
| } |
| |
| uint |
| G1CollectorPolicy::calculate_young_list_target_length(size_t rs_lengths, |
| uint base_min_length, |
| uint desired_min_length, |
| uint desired_max_length) { |
| assert(adaptive_young_list_length(), "pre-condition"); |
| assert(gcs_are_young(), "only call this for young GCs"); |
| |
| // In case some edge-condition makes the desired max length too small... |
| if (desired_max_length <= desired_min_length) { |
| return desired_min_length; |
| } |
| |
| // We'll adjust min_young_length and max_young_length not to include |
| // the already allocated young regions (i.e., so they reflect the |
| // min and max eden regions we'll allocate). The base_min_length |
| // will be reflected in the predictions by the |
| // survivor_regions_evac_time prediction. |
| assert(desired_min_length > base_min_length, "invariant"); |
| uint min_young_length = desired_min_length - base_min_length; |
| assert(desired_max_length > base_min_length, "invariant"); |
| uint max_young_length = desired_max_length - base_min_length; |
| |
| double target_pause_time_ms = _mmu_tracker->max_gc_time() * 1000.0; |
| double survivor_regions_evac_time = predict_survivor_regions_evac_time(); |
| size_t pending_cards = (size_t) get_new_prediction(_pending_cards_seq); |
| size_t adj_rs_lengths = rs_lengths + predict_rs_length_diff(); |
| size_t scanned_cards = predict_young_card_num(adj_rs_lengths); |
| double base_time_ms = |
| predict_base_elapsed_time_ms(pending_cards, scanned_cards) + |
| survivor_regions_evac_time; |
| uint available_free_regions = _free_regions_at_end_of_collection; |
| uint base_free_regions = 0; |
| if (available_free_regions > _reserve_regions) { |
| base_free_regions = available_free_regions - _reserve_regions; |
| } |
| |
| // Here, we will make sure that the shortest young length that |
| // makes sense fits within the target pause time. |
| |
| if (predict_will_fit(min_young_length, base_time_ms, |
| base_free_regions, target_pause_time_ms)) { |
| // The shortest young length will fit into the target pause time; |
| // we'll now check whether the absolute maximum number of young |
| // regions will fit in the target pause time. If not, we'll do |
| // a binary search between min_young_length and max_young_length. |
| if (predict_will_fit(max_young_length, base_time_ms, |
| base_free_regions, target_pause_time_ms)) { |
| // The maximum young length will fit into the target pause time. |
| // We are done so set min young length to the maximum length (as |
| // the result is assumed to be returned in min_young_length). |
| min_young_length = max_young_length; |
| } else { |
| // The maximum possible number of young regions will not fit within |
| // the target pause time so we'll search for the optimal |
| // length. The loop invariants are: |
| // |
| // min_young_length < max_young_length |
| // min_young_length is known to fit into the target pause time |
| // max_young_length is known not to fit into the target pause time |
| // |
| // Going into the loop we know the above hold as we've just |
| // checked them. Every time around the loop we check whether |
| // the middle value between min_young_length and |
| // max_young_length fits into the target pause time. If it |
| // does, it becomes the new min. If it doesn't, it becomes |
| // the new max. This way we maintain the loop invariants. |
| |
| assert(min_young_length < max_young_length, "invariant"); |
| uint diff = (max_young_length - min_young_length) / 2; |
| while (diff > 0) { |
| uint young_length = min_young_length + diff; |
| if (predict_will_fit(young_length, base_time_ms, |
| base_free_regions, target_pause_time_ms)) { |
| min_young_length = young_length; |
| } else { |
| max_young_length = young_length; |
| } |
| assert(min_young_length < max_young_length, "invariant"); |
| diff = (max_young_length - min_young_length) / 2; |
| } |
| // The results is min_young_length which, according to the |
| // loop invariants, should fit within the target pause time. |
| |
| // These are the post-conditions of the binary search above: |
| assert(min_young_length < max_young_length, |
| "otherwise we should have discovered that max_young_length " |
| "fits into the pause target and not done the binary search"); |
| assert(predict_will_fit(min_young_length, base_time_ms, |
| base_free_regions, target_pause_time_ms), |
| "min_young_length, the result of the binary search, should " |
| "fit into the pause target"); |
| assert(!predict_will_fit(min_young_length + 1, base_time_ms, |
| base_free_regions, target_pause_time_ms), |
| "min_young_length, the result of the binary search, should be " |
| "optimal, so no larger length should fit into the pause target"); |
| } |
| } else { |
| // Even the minimum length doesn't fit into the pause time |
| // target, return it as the result nevertheless. |
| } |
| return base_min_length + min_young_length; |
| } |
| |
| double G1CollectorPolicy::predict_survivor_regions_evac_time() { |
| double survivor_regions_evac_time = 0.0; |
| for (HeapRegion * r = _recorded_survivor_head; |
| r != NULL && r != _recorded_survivor_tail->get_next_young_region(); |
| r = r->get_next_young_region()) { |
| survivor_regions_evac_time += predict_region_elapsed_time_ms(r, gcs_are_young()); |
| } |
| return survivor_regions_evac_time; |
| } |
| |
| void G1CollectorPolicy::revise_young_list_target_length_if_necessary() { |
| guarantee( adaptive_young_list_length(), "should not call this otherwise" ); |
| |
| size_t rs_lengths = _g1->young_list()->sampled_rs_lengths(); |
| if (rs_lengths > _rs_lengths_prediction) { |
| // add 10% to avoid having to recalculate often |
| size_t rs_lengths_prediction = rs_lengths * 1100 / 1000; |
| update_young_list_target_length(rs_lengths_prediction); |
| } |
| } |
| |
| |
| |
| HeapWord* G1CollectorPolicy::mem_allocate_work(size_t size, |
| bool is_tlab, |
| bool* gc_overhead_limit_was_exceeded) { |
| guarantee(false, "Not using this policy feature yet."); |
| return NULL; |
| } |
| |
| // This method controls how a collector handles one or more |
| // of its generations being fully allocated. |
| HeapWord* G1CollectorPolicy::satisfy_failed_allocation(size_t size, |
| bool is_tlab) { |
| guarantee(false, "Not using this policy feature yet."); |
| return NULL; |
| } |
| |
| |
| #ifndef PRODUCT |
| bool G1CollectorPolicy::verify_young_ages() { |
| HeapRegion* head = _g1->young_list()->first_region(); |
| return |
| verify_young_ages(head, _short_lived_surv_rate_group); |
| // also call verify_young_ages on any additional surv rate groups |
| } |
| |
| bool |
| G1CollectorPolicy::verify_young_ages(HeapRegion* head, |
| SurvRateGroup *surv_rate_group) { |
| guarantee( surv_rate_group != NULL, "pre-condition" ); |
| |
| const char* name = surv_rate_group->name(); |
| bool ret = true; |
| int prev_age = -1; |
| |
| for (HeapRegion* curr = head; |
| curr != NULL; |
| curr = curr->get_next_young_region()) { |
| SurvRateGroup* group = curr->surv_rate_group(); |
| if (group == NULL && !curr->is_survivor()) { |
| gclog_or_tty->print_cr("## %s: encountered NULL surv_rate_group", name); |
| ret = false; |
| } |
| |
| if (surv_rate_group == group) { |
| int age = curr->age_in_surv_rate_group(); |
| |
| if (age < 0) { |
| gclog_or_tty->print_cr("## %s: encountered negative age", name); |
| ret = false; |
| } |
| |
| if (age <= prev_age) { |
| gclog_or_tty->print_cr("## %s: region ages are not strictly increasing " |
| "(%d, %d)", name, age, prev_age); |
| ret = false; |
| } |
| prev_age = age; |
| } |
| } |
| |
| return ret; |
| } |
| #endif // PRODUCT |
| |
| void G1CollectorPolicy::record_full_collection_start() { |
| _full_collection_start_sec = os::elapsedTime(); |
| record_heap_size_info_at_start(true /* full */); |
| // Release the future to-space so that it is available for compaction into. |
| _g1->set_full_collection(); |
| } |
| |
| void G1CollectorPolicy::record_full_collection_end() { |
| // Consider this like a collection pause for the purposes of allocation |
| // since last pause. |
| double end_sec = os::elapsedTime(); |
| double full_gc_time_sec = end_sec - _full_collection_start_sec; |
| double full_gc_time_ms = full_gc_time_sec * 1000.0; |
| |
| _trace_gen1_time_data.record_full_collection(full_gc_time_ms); |
| |
| update_recent_gc_times(end_sec, full_gc_time_ms); |
| |
| _g1->clear_full_collection(); |
| |
| // "Nuke" the heuristics that control the young/mixed GC |
| // transitions and make sure we start with young GCs after the Full GC. |
| set_gcs_are_young(true); |
| _last_young_gc = false; |
| clear_initiate_conc_mark_if_possible(); |
| clear_during_initial_mark_pause(); |
| _in_marking_window = false; |
| _in_marking_window_im = false; |
| |
| _short_lived_surv_rate_group->start_adding_regions(); |
| // also call this on any additional surv rate groups |
| |
| record_survivor_regions(0, NULL, NULL); |
| |
| _free_regions_at_end_of_collection = _g1->num_free_regions(); |
| // Reset survivors SurvRateGroup. |
| _survivor_surv_rate_group->reset(); |
| update_young_list_target_length(); |
| _collectionSetChooser->clear(); |
| } |
| |
| void G1CollectorPolicy::record_stop_world_start() { |
| _stop_world_start = os::elapsedTime(); |
| } |
| |
| void G1CollectorPolicy::record_collection_pause_start(double start_time_sec) { |
| // We only need to do this here as the policy will only be applied |
| // to the GC we're about to start. so, no point is calculating this |
| // every time we calculate / recalculate the target young length. |
| update_survivors_policy(); |
| |
| assert(_g1->used() == _g1->recalculate_used(), |
| err_msg("sanity, used: "SIZE_FORMAT" recalculate_used: "SIZE_FORMAT, |
| _g1->used(), _g1->recalculate_used())); |
| |
| double s_w_t_ms = (start_time_sec - _stop_world_start) * 1000.0; |
| _trace_gen0_time_data.record_start_collection(s_w_t_ms); |
| _stop_world_start = 0.0; |
| |
| record_heap_size_info_at_start(false /* full */); |
| |
| phase_times()->record_cur_collection_start_sec(start_time_sec); |
| _pending_cards = _g1->pending_card_num(); |
| |
| _collection_set_bytes_used_before = 0; |
| _bytes_copied_during_gc = 0; |
| |
| _last_gc_was_young = false; |
| |
| // do that for any other surv rate groups |
| _short_lived_surv_rate_group->stop_adding_regions(); |
| _survivors_age_table.clear(); |
| |
| assert( verify_young_ages(), "region age verification" ); |
| } |
| |
| void G1CollectorPolicy::record_concurrent_mark_init_end(double |
| mark_init_elapsed_time_ms) { |
| _during_marking = true; |
| assert(!initiate_conc_mark_if_possible(), "we should have cleared it by now"); |
| clear_during_initial_mark_pause(); |
| _cur_mark_stop_world_time_ms = mark_init_elapsed_time_ms; |
| } |
| |
| void G1CollectorPolicy::record_concurrent_mark_remark_start() { |
| _mark_remark_start_sec = os::elapsedTime(); |
| _during_marking = false; |
| } |
| |
| void G1CollectorPolicy::record_concurrent_mark_remark_end() { |
| double end_time_sec = os::elapsedTime(); |
| double elapsed_time_ms = (end_time_sec - _mark_remark_start_sec)*1000.0; |
| _concurrent_mark_remark_times_ms->add(elapsed_time_ms); |
| _cur_mark_stop_world_time_ms += elapsed_time_ms; |
| _prev_collection_pause_end_ms += elapsed_time_ms; |
| |
| _mmu_tracker->add_pause(_mark_remark_start_sec, end_time_sec, true); |
| } |
| |
| void G1CollectorPolicy::record_concurrent_mark_cleanup_start() { |
| _mark_cleanup_start_sec = os::elapsedTime(); |
| } |
| |
| void G1CollectorPolicy::record_concurrent_mark_cleanup_completed() { |
| _last_young_gc = true; |
| _in_marking_window = false; |
| } |
| |
| void G1CollectorPolicy::record_concurrent_pause() { |
| if (_stop_world_start > 0.0) { |
| double yield_ms = (os::elapsedTime() - _stop_world_start) * 1000.0; |
| _trace_gen0_time_data.record_yield_time(yield_ms); |
| } |
| } |
| |
| bool G1CollectorPolicy::need_to_start_conc_mark(const char* source, size_t alloc_word_size) { |
| if (_g1->concurrent_mark()->cmThread()->during_cycle()) { |
| return false; |
| } |
| |
| size_t marking_initiating_used_threshold = |
| (_g1->capacity() / 100) * InitiatingHeapOccupancyPercent; |
| size_t cur_used_bytes = _g1->non_young_capacity_bytes(); |
| size_t alloc_byte_size = alloc_word_size * HeapWordSize; |
| |
| if ((cur_used_bytes + alloc_byte_size) > marking_initiating_used_threshold) { |
| if (gcs_are_young() && !_last_young_gc) { |
| ergo_verbose5(ErgoConcCycles, |
| "request concurrent cycle initiation", |
| ergo_format_reason("occupancy higher than threshold") |
| ergo_format_byte("occupancy") |
| ergo_format_byte("allocation request") |
| ergo_format_byte_perc("threshold") |
| ergo_format_str("source"), |
| cur_used_bytes, |
| alloc_byte_size, |
| marking_initiating_used_threshold, |
| (double) InitiatingHeapOccupancyPercent, |
| source); |
| return true; |
| } else { |
| ergo_verbose5(ErgoConcCycles, |
| "do not request concurrent cycle initiation", |
| ergo_format_reason("still doing mixed collections") |
| ergo_format_byte("occupancy") |
| ergo_format_byte("allocation request") |
| ergo_format_byte_perc("threshold") |
| ergo_format_str("source"), |
| cur_used_bytes, |
| alloc_byte_size, |
| marking_initiating_used_threshold, |
| (double) InitiatingHeapOccupancyPercent, |
| source); |
| } |
| } |
| |
| return false; |
| } |
| |
| // Anything below that is considered to be zero |
| #define MIN_TIMER_GRANULARITY 0.0000001 |
| |
| void G1CollectorPolicy::record_collection_pause_end(double pause_time_ms, EvacuationInfo& evacuation_info) { |
| double end_time_sec = os::elapsedTime(); |
| assert(_cur_collection_pause_used_regions_at_start >= cset_region_length(), |
| "otherwise, the subtraction below does not make sense"); |
| size_t rs_size = |
| _cur_collection_pause_used_regions_at_start - cset_region_length(); |
| size_t cur_used_bytes = _g1->used(); |
| assert(cur_used_bytes == _g1->recalculate_used(), "It should!"); |
| bool last_pause_included_initial_mark = false; |
| bool update_stats = !_g1->evacuation_failed(); |
| |
| #ifndef PRODUCT |
| if (G1YoungSurvRateVerbose) { |
| gclog_or_tty->cr(); |
| _short_lived_surv_rate_group->print(); |
| // do that for any other surv rate groups too |
| } |
| #endif // PRODUCT |
| |
| last_pause_included_initial_mark = during_initial_mark_pause(); |
| if (last_pause_included_initial_mark) { |
| record_concurrent_mark_init_end(0.0); |
| } else if (need_to_start_conc_mark("end of GC")) { |
| // Note: this might have already been set, if during the last |
| // pause we decided to start a cycle but at the beginning of |
| // this pause we decided to postpone it. That's OK. |
| set_initiate_conc_mark_if_possible(); |
| } |
| |
| _mmu_tracker->add_pause(end_time_sec - pause_time_ms/1000.0, |
| end_time_sec, false); |
| |
| evacuation_info.set_collectionset_used_before(_collection_set_bytes_used_before); |
| evacuation_info.set_bytes_copied(_bytes_copied_during_gc); |
| |
| if (update_stats) { |
| _trace_gen0_time_data.record_end_collection(pause_time_ms, phase_times()); |
| // this is where we update the allocation rate of the application |
| double app_time_ms = |
| (phase_times()->cur_collection_start_sec() * 1000.0 - _prev_collection_pause_end_ms); |
| if (app_time_ms < MIN_TIMER_GRANULARITY) { |
| // This usually happens due to the timer not having the required |
| // granularity. Some Linuxes are the usual culprits. |
| // We'll just set it to something (arbitrarily) small. |
| app_time_ms = 1.0; |
| } |
| // We maintain the invariant that all objects allocated by mutator |
| // threads will be allocated out of eden regions. So, we can use |
| // the eden region number allocated since the previous GC to |
| // calculate the application's allocate rate. The only exception |
| // to that is humongous objects that are allocated separately. But |
| // given that humongous object allocations do not really affect |
| // either the pause's duration nor when the next pause will take |
| // place we can safely ignore them here. |
| uint regions_allocated = eden_cset_region_length(); |
| double alloc_rate_ms = (double) regions_allocated / app_time_ms; |
| _alloc_rate_ms_seq->add(alloc_rate_ms); |
| |
| double interval_ms = |
| (end_time_sec - _recent_prev_end_times_for_all_gcs_sec->oldest()) * 1000.0; |
| update_recent_gc_times(end_time_sec, pause_time_ms); |
| _recent_avg_pause_time_ratio = _recent_gc_times_ms->sum()/interval_ms; |
| if (recent_avg_pause_time_ratio() < 0.0 || |
| (recent_avg_pause_time_ratio() - 1.0 > 0.0)) { |
| #ifndef PRODUCT |
| // Dump info to allow post-facto debugging |
| gclog_or_tty->print_cr("recent_avg_pause_time_ratio() out of bounds"); |
| gclog_or_tty->print_cr("-------------------------------------------"); |
| gclog_or_tty->print_cr("Recent GC Times (ms):"); |
| _recent_gc_times_ms->dump(); |
| gclog_or_tty->print_cr("(End Time=%3.3f) Recent GC End Times (s):", end_time_sec); |
| _recent_prev_end_times_for_all_gcs_sec->dump(); |
| gclog_or_tty->print_cr("GC = %3.3f, Interval = %3.3f, Ratio = %3.3f", |
| _recent_gc_times_ms->sum(), interval_ms, recent_avg_pause_time_ratio()); |
| // In debug mode, terminate the JVM if the user wants to debug at this point. |
| assert(!G1FailOnFPError, "Debugging data for CR 6898948 has been dumped above"); |
| #endif // !PRODUCT |
| // Clip ratio between 0.0 and 1.0, and continue. This will be fixed in |
| // CR 6902692 by redoing the manner in which the ratio is incrementally computed. |
| if (_recent_avg_pause_time_ratio < 0.0) { |
| _recent_avg_pause_time_ratio = 0.0; |
| } else { |
| assert(_recent_avg_pause_time_ratio - 1.0 > 0.0, "Ctl-point invariant"); |
| _recent_avg_pause_time_ratio = 1.0; |
| } |
| } |
| } |
| |
| bool new_in_marking_window = _in_marking_window; |
| bool new_in_marking_window_im = false; |
| if (last_pause_included_initial_mark) { |
| new_in_marking_window = true; |
| new_in_marking_window_im = true; |
| } |
| |
| if (_last_young_gc) { |
| // This is supposed to to be the "last young GC" before we start |
| // doing mixed GCs. Here we decide whether to start mixed GCs or not. |
| |
| if (!last_pause_included_initial_mark) { |
| if (next_gc_should_be_mixed("start mixed GCs", |
| "do not start mixed GCs")) { |
| set_gcs_are_young(false); |
| } |
| } else { |
| ergo_verbose0(ErgoMixedGCs, |
| "do not start mixed GCs", |
| ergo_format_reason("concurrent cycle is about to start")); |
| } |
| _last_young_gc = false; |
| } |
| |
| if (!_last_gc_was_young) { |
| // This is a mixed GC. Here we decide whether to continue doing |
| // mixed GCs or not. |
| |
| if (!next_gc_should_be_mixed("continue mixed GCs", |
| "do not continue mixed GCs")) { |
| set_gcs_are_young(true); |
| } |
| } |
| |
| _short_lived_surv_rate_group->start_adding_regions(); |
| // do that for any other surv rate groupsx |
| |
| if (update_stats) { |
| double cost_per_card_ms = 0.0; |
| if (_pending_cards > 0) { |
| cost_per_card_ms = phase_times()->average_time_ms(G1GCPhaseTimes::UpdateRS) / (double) _pending_cards; |
| _cost_per_card_ms_seq->add(cost_per_card_ms); |
| } |
| |
| size_t cards_scanned = _g1->cards_scanned(); |
| |
| double cost_per_entry_ms = 0.0; |
| if (cards_scanned > 10) { |
| cost_per_entry_ms = phase_times()->average_time_ms(G1GCPhaseTimes::ScanRS) / (double) cards_scanned; |
| if (_last_gc_was_young) { |
| _cost_per_entry_ms_seq->add(cost_per_entry_ms); |
| } else { |
| _mixed_cost_per_entry_ms_seq->add(cost_per_entry_ms); |
| } |
| } |
| |
| if (_max_rs_lengths > 0) { |
| double cards_per_entry_ratio = |
| (double) cards_scanned / (double) _max_rs_lengths; |
| if (_last_gc_was_young) { |
| _young_cards_per_entry_ratio_seq->add(cards_per_entry_ratio); |
| } else { |
| _mixed_cards_per_entry_ratio_seq->add(cards_per_entry_ratio); |
| } |
| } |
| |
| // This is defensive. For a while _max_rs_lengths could get |
| // smaller than _recorded_rs_lengths which was causing |
| // rs_length_diff to get very large and mess up the RSet length |
| // predictions. The reason was unsafe concurrent updates to the |
| // _inc_cset_recorded_rs_lengths field which the code below guards |
| // against (see CR 7118202). This bug has now been fixed (see CR |
| // 7119027). However, I'm still worried that |
| // _inc_cset_recorded_rs_lengths might still end up somewhat |
| // inaccurate. The concurrent refinement thread calculates an |
| // RSet's length concurrently with other CR threads updating it |
| // which might cause it to calculate the length incorrectly (if, |
| // say, it's in mid-coarsening). So I'll leave in the defensive |
| // conditional below just in case. |
| size_t rs_length_diff = 0; |
| if (_max_rs_lengths > _recorded_rs_lengths) { |
| rs_length_diff = _max_rs_lengths - _recorded_rs_lengths; |
| } |
| _rs_length_diff_seq->add((double) rs_length_diff); |
| |
| size_t freed_bytes = _heap_used_bytes_before_gc - cur_used_bytes; |
| size_t copied_bytes = _collection_set_bytes_used_before - freed_bytes; |
| double cost_per_byte_ms = 0.0; |
| |
| if (copied_bytes > 0) { |
| cost_per_byte_ms = phase_times()->average_time_ms(G1GCPhaseTimes::ObjCopy) / (double) copied_bytes; |
| if (_in_marking_window) { |
| _cost_per_byte_ms_during_cm_seq->add(cost_per_byte_ms); |
| } else { |
| _cost_per_byte_ms_seq->add(cost_per_byte_ms); |
| } |
| } |
| |
| double all_other_time_ms = pause_time_ms - |
| (phase_times()->average_time_ms(G1GCPhaseTimes::UpdateRS) + phase_times()->average_time_ms(G1GCPhaseTimes::ScanRS) + |
| phase_times()->average_time_ms(G1GCPhaseTimes::ObjCopy) + phase_times()->average_time_ms(G1GCPhaseTimes::Termination)); |
| |
| double young_other_time_ms = 0.0; |
| if (young_cset_region_length() > 0) { |
| young_other_time_ms = |
| phase_times()->young_cset_choice_time_ms() + |
| phase_times()->young_free_cset_time_ms(); |
| _young_other_cost_per_region_ms_seq->add(young_other_time_ms / |
| (double) young_cset_region_length()); |
| } |
| double non_young_other_time_ms = 0.0; |
| if (old_cset_region_length() > 0) { |
| non_young_other_time_ms = |
| phase_times()->non_young_cset_choice_time_ms() + |
| phase_times()->non_young_free_cset_time_ms(); |
| |
| _non_young_other_cost_per_region_ms_seq->add(non_young_other_time_ms / |
| (double) old_cset_region_length()); |
| } |
| |
| double constant_other_time_ms = all_other_time_ms - |
| (young_other_time_ms + non_young_other_time_ms); |
| _constant_other_time_ms_seq->add(constant_other_time_ms); |
| |
| double survival_ratio = 0.0; |
| if (_collection_set_bytes_used_before > 0) { |
| survival_ratio = (double) _bytes_copied_during_gc / |
| (double) _collection_set_bytes_used_before; |
| } |
| |
| _pending_cards_seq->add((double) _pending_cards); |
| _rs_lengths_seq->add((double) _max_rs_lengths); |
| } |
| |
| _in_marking_window = new_in_marking_window; |
| _in_marking_window_im = new_in_marking_window_im; |
| _free_regions_at_end_of_collection = _g1->num_free_regions(); |
| update_young_list_target_length(); |
| |
| // Note that _mmu_tracker->max_gc_time() returns the time in seconds. |
| double update_rs_time_goal_ms = _mmu_tracker->max_gc_time() * MILLIUNITS * G1RSetUpdatingPauseTimePercent / 100.0; |
| adjust_concurrent_refinement(phase_times()->average_time_ms(G1GCPhaseTimes::UpdateRS), |
| phase_times()->sum_thread_work_items(G1GCPhaseTimes::UpdateRS), update_rs_time_goal_ms); |
| |
| _collectionSetChooser->verify(); |
| } |
| |
| #define EXT_SIZE_FORMAT "%.1f%s" |
| #define EXT_SIZE_PARAMS(bytes) \ |
| byte_size_in_proper_unit((double)(bytes)), \ |
| proper_unit_for_byte_size((bytes)) |
| |
| void G1CollectorPolicy::record_heap_size_info_at_start(bool full) { |
| YoungList* young_list = _g1->young_list(); |
| _eden_used_bytes_before_gc = young_list->eden_used_bytes(); |
| _survivor_used_bytes_before_gc = young_list->survivor_used_bytes(); |
| _heap_capacity_bytes_before_gc = _g1->capacity(); |
| _heap_used_bytes_before_gc = _g1->used(); |
| _cur_collection_pause_used_regions_at_start = _g1->num_used_regions(); |
| |
| _eden_capacity_bytes_before_gc = |
| (_young_list_target_length * HeapRegion::GrainBytes) - _survivor_used_bytes_before_gc; |
| |
| if (full) { |
| _metaspace_used_bytes_before_gc = MetaspaceAux::used_bytes(); |
| } |
| } |
| |
| void G1CollectorPolicy::print_heap_transition() { |
| _g1->print_size_transition(gclog_or_tty, |
| _heap_used_bytes_before_gc, |
| _g1->used(), |
| _g1->capacity()); |
| } |
| |
| void G1CollectorPolicy::print_detailed_heap_transition(bool full) { |
| YoungList* young_list = _g1->young_list(); |
| |
| size_t eden_used_bytes_after_gc = young_list->eden_used_bytes(); |
| size_t survivor_used_bytes_after_gc = young_list->survivor_used_bytes(); |
| size_t heap_used_bytes_after_gc = _g1->used(); |
| |
| size_t heap_capacity_bytes_after_gc = _g1->capacity(); |
| size_t eden_capacity_bytes_after_gc = |
| (_young_list_target_length * HeapRegion::GrainBytes) - survivor_used_bytes_after_gc; |
| |
| gclog_or_tty->print( |
| " [Eden: "EXT_SIZE_FORMAT"("EXT_SIZE_FORMAT")->"EXT_SIZE_FORMAT"("EXT_SIZE_FORMAT") " |
| "Survivors: "EXT_SIZE_FORMAT"->"EXT_SIZE_FORMAT" " |
| "Heap: "EXT_SIZE_FORMAT"("EXT_SIZE_FORMAT")->" |
| EXT_SIZE_FORMAT"("EXT_SIZE_FORMAT")]", |
| EXT_SIZE_PARAMS(_eden_used_bytes_before_gc), |
| EXT_SIZE_PARAMS(_eden_capacity_bytes_before_gc), |
| EXT_SIZE_PARAMS(eden_used_bytes_after_gc), |
| EXT_SIZE_PARAMS(eden_capacity_bytes_after_gc), |
| EXT_SIZE_PARAMS(_survivor_used_bytes_before_gc), |
| EXT_SIZE_PARAMS(survivor_used_bytes_after_gc), |
| EXT_SIZE_PARAMS(_heap_used_bytes_before_gc), |
| EXT_SIZE_PARAMS(_heap_capacity_bytes_before_gc), |
| EXT_SIZE_PARAMS(heap_used_bytes_after_gc), |
| EXT_SIZE_PARAMS(heap_capacity_bytes_after_gc)); |
| |
| if (full) { |
| MetaspaceAux::print_metaspace_change(_metaspace_used_bytes_before_gc); |
| } |
| |
| gclog_or_tty->cr(); |
| } |
| |
| void G1CollectorPolicy::adjust_concurrent_refinement(double update_rs_time, |
| double update_rs_processed_buffers, |
| double goal_ms) { |
| DirtyCardQueueSet& dcqs = JavaThread::dirty_card_queue_set(); |
| ConcurrentG1Refine *cg1r = G1CollectedHeap::heap()->concurrent_g1_refine(); |
| |
| if (G1UseAdaptiveConcRefinement) { |
| const int k_gy = 3, k_gr = 6; |
| const double inc_k = 1.1, dec_k = 0.9; |
| |
| int g = cg1r->green_zone(); |
| if (update_rs_time > goal_ms) { |
| g = (int)(g * dec_k); // Can become 0, that's OK. That would mean a mutator-only processing. |
| } else { |
| if (update_rs_time < goal_ms && update_rs_processed_buffers > g) { |
| g = (int)MAX2(g * inc_k, g + 1.0); |
| } |
| } |
| // Change the refinement threads params |
| cg1r->set_green_zone(g); |
| cg1r->set_yellow_zone(g * k_gy); |
| cg1r->set_red_zone(g * k_gr); |
| cg1r->reinitialize_threads(); |
| |
| int processing_threshold_delta = MAX2((int)(cg1r->green_zone() * sigma()), 1); |
| int processing_threshold = MIN2(cg1r->green_zone() + processing_threshold_delta, |
| cg1r->yellow_zone()); |
| // Change the barrier params |
| dcqs.set_process_completed_threshold(processing_threshold); |
| dcqs.set_max_completed_queue(cg1r->red_zone()); |
| } |
| |
| int curr_queue_size = dcqs.completed_buffers_num(); |
| if (curr_queue_size >= cg1r->yellow_zone()) { |
| dcqs.set_completed_queue_padding(curr_queue_size); |
| } else { |
| dcqs.set_completed_queue_padding(0); |
| } |
| dcqs.notify_if_necessary(); |
| } |
| |
| double |
| G1CollectorPolicy::predict_base_elapsed_time_ms(size_t pending_cards, |
| size_t scanned_cards) { |
| return |
| predict_rs_update_time_ms(pending_cards) + |
| predict_rs_scan_time_ms(scanned_cards) + |
| predict_constant_other_time_ms(); |
| } |
| |
| double |
| G1CollectorPolicy::predict_base_elapsed_time_ms(size_t pending_cards) { |
| size_t rs_length = predict_rs_length_diff(); |
| size_t card_num; |
| if (gcs_are_young()) { |
| card_num = predict_young_card_num(rs_length); |
| } else { |
| card_num = predict_non_young_card_num(rs_length); |
| } |
| return predict_base_elapsed_time_ms(pending_cards, card_num); |
| } |
| |
| size_t G1CollectorPolicy::predict_bytes_to_copy(HeapRegion* hr) { |
| size_t bytes_to_copy; |
| if (hr->is_marked()) |
| bytes_to_copy = hr->max_live_bytes(); |
| else { |
| assert(hr->is_young() && hr->age_in_surv_rate_group() != -1, "invariant"); |
| int age = hr->age_in_surv_rate_group(); |
| double yg_surv_rate = predict_yg_surv_rate(age, hr->surv_rate_group()); |
| bytes_to_copy = (size_t) ((double) hr->used() * yg_surv_rate); |
| } |
| return bytes_to_copy; |
| } |
| |
| double |
| G1CollectorPolicy::predict_region_elapsed_time_ms(HeapRegion* hr, |
| bool for_young_gc) { |
| size_t rs_length = hr->rem_set()->occupied(); |
| size_t card_num; |
| |
| // Predicting the number of cards is based on which type of GC |
| // we're predicting for. |
| if (for_young_gc) { |
| card_num = predict_young_card_num(rs_length); |
| } else { |
| card_num = predict_non_young_card_num(rs_length); |
| } |
| size_t bytes_to_copy = predict_bytes_to_copy(hr); |
| |
| double region_elapsed_time_ms = |
| predict_rs_scan_time_ms(card_num) + |
| predict_object_copy_time_ms(bytes_to_copy); |
| |
| // The prediction of the "other" time for this region is based |
| // upon the region type and NOT the GC type. |
| if (hr->is_young()) { |
| region_elapsed_time_ms += predict_young_other_time_ms(1); |
| } else { |
| region_elapsed_time_ms += predict_non_young_other_time_ms(1); |
| } |
| return region_elapsed_time_ms; |
| } |
| |
| void |
| G1CollectorPolicy::init_cset_region_lengths(uint eden_cset_region_length, |
| uint survivor_cset_region_length) { |
| _eden_cset_region_length = eden_cset_region_length; |
| _survivor_cset_region_length = survivor_cset_region_length; |
| _old_cset_region_length = 0; |
| } |
| |
| void G1CollectorPolicy::set_recorded_rs_lengths(size_t rs_lengths) { |
| _recorded_rs_lengths = rs_lengths; |
| } |
| |
| void G1CollectorPolicy::update_recent_gc_times(double end_time_sec, |
| double elapsed_ms) { |
| _recent_gc_times_ms->add(elapsed_ms); |
| _recent_prev_end_times_for_all_gcs_sec->add(end_time_sec); |
| _prev_collection_pause_end_ms = end_time_sec * 1000.0; |
| } |
| |
| size_t G1CollectorPolicy::expansion_amount() { |
| double recent_gc_overhead = recent_avg_pause_time_ratio() * 100.0; |
| double threshold = _gc_overhead_perc; |
| if (recent_gc_overhead > threshold) { |
| // We will double the existing space, or take |
| // G1ExpandByPercentOfAvailable % of the available expansion |
| // space, whichever is smaller, bounded below by a minimum |
| // expansion (unless that's all that's left.) |
| const size_t min_expand_bytes = 1*M; |
| size_t reserved_bytes = _g1->max_capacity(); |
| size_t committed_bytes = _g1->capacity(); |
| size_t uncommitted_bytes = reserved_bytes - committed_bytes; |
| size_t expand_bytes; |
| size_t expand_bytes_via_pct = |
| uncommitted_bytes * G1ExpandByPercentOfAvailable / 100; |
| expand_bytes = MIN2(expand_bytes_via_pct, committed_bytes); |
| expand_bytes = MAX2(expand_bytes, min_expand_bytes); |
| expand_bytes = MIN2(expand_bytes, uncommitted_bytes); |
| |
| ergo_verbose5(ErgoHeapSizing, |
| "attempt heap expansion", |
| ergo_format_reason("recent GC overhead higher than " |
| "threshold after GC") |
| ergo_format_perc("recent GC overhead") |
| ergo_format_perc("threshold") |
| ergo_format_byte("uncommitted") |
| ergo_format_byte_perc("calculated expansion amount"), |
| recent_gc_overhead, threshold, |
| uncommitted_bytes, |
| expand_bytes_via_pct, (double) G1ExpandByPercentOfAvailable); |
| |
| return expand_bytes; |
| } else { |
| return 0; |
| } |
| } |
| |
| void G1CollectorPolicy::print_tracing_info() const { |
| _trace_gen0_time_data.print(); |
| _trace_gen1_time_data.print(); |
| } |
| |
| void G1CollectorPolicy::print_yg_surv_rate_info() const { |
| #ifndef PRODUCT |
| _short_lived_surv_rate_group->print_surv_rate_summary(); |
| // add this call for any other surv rate groups |
| #endif // PRODUCT |
| } |
| |
| bool G1CollectorPolicy::is_young_list_full() { |
| uint young_list_length = _g1->young_list()->length(); |
| uint young_list_target_length = _young_list_target_length; |
| return young_list_length >= young_list_target_length; |
| } |
| |
| bool G1CollectorPolicy::can_expand_young_list() { |
| uint young_list_length = _g1->young_list()->length(); |
| uint young_list_max_length = _young_list_max_length; |
| return young_list_length < young_list_max_length; |
| } |
| |
| void G1CollectorPolicy::update_max_gc_locker_expansion() { |
| uint expansion_region_num = 0; |
| if (GCLockerEdenExpansionPercent > 0) { |
| double perc = (double) GCLockerEdenExpansionPercent / 100.0; |
| double expansion_region_num_d = perc * (double) _young_list_target_length; |
| // We use ceiling so that if expansion_region_num_d is > 0.0 (but |
| // less than 1.0) we'll get 1. |
| expansion_region_num = (uint) ceil(expansion_region_num_d); |
| } else { |
| assert(expansion_region_num == 0, "sanity"); |
| } |
| _young_list_max_length = _young_list_target_length + expansion_region_num; |
| assert(_young_list_target_length <= _young_list_max_length, "post-condition"); |
| } |
| |
| // Calculates survivor space parameters. |
| void G1CollectorPolicy::update_survivors_policy() { |
| double max_survivor_regions_d = |
| (double) _young_list_target_length / (double) SurvivorRatio; |
| // We use ceiling so that if max_survivor_regions_d is > 0.0 (but |
| // smaller than 1.0) we'll get 1. |
| _max_survivor_regions = (uint) ceil(max_survivor_regions_d); |
| |
| _tenuring_threshold = _survivors_age_table.compute_tenuring_threshold( |
| HeapRegion::GrainWords * _max_survivor_regions); |
| } |
| |
| bool G1CollectorPolicy::force_initial_mark_if_outside_cycle( |
| GCCause::Cause gc_cause) { |
| bool during_cycle = _g1->concurrent_mark()->cmThread()->during_cycle(); |
| if (!during_cycle) { |
| ergo_verbose1(ErgoConcCycles, |
| "request concurrent cycle initiation", |
| ergo_format_reason("requested by GC cause") |
| ergo_format_str("GC cause"), |
| GCCause::to_string(gc_cause)); |
| set_initiate_conc_mark_if_possible(); |
| return true; |
| } else { |
| ergo_verbose1(ErgoConcCycles, |
| "do not request concurrent cycle initiation", |
| ergo_format_reason("concurrent cycle already in progress") |
| ergo_format_str("GC cause"), |
| GCCause::to_string(gc_cause)); |
| return false; |
| } |
| } |
| |
| void |
| G1CollectorPolicy::decide_on_conc_mark_initiation() { |
| // We are about to decide on whether this pause will be an |
| // initial-mark pause. |
| |
| // First, during_initial_mark_pause() should not be already set. We |
| // will set it here if we have to. However, it should be cleared by |
| // the end of the pause (it's only set for the duration of an |
| // initial-mark pause). |
| assert(!during_initial_mark_pause(), "pre-condition"); |
| |
| if (initiate_conc_mark_if_possible()) { |
| // We had noticed on a previous pause that the heap occupancy has |
| // gone over the initiating threshold and we should start a |
| // concurrent marking cycle. So we might initiate one. |
| |
| bool during_cycle = _g1->concurrent_mark()->cmThread()->during_cycle(); |
| if (!during_cycle) { |
| // The concurrent marking thread is not "during a cycle", i.e., |
| // it has completed the last one. So we can go ahead and |
| // initiate a new cycle. |
| |
| set_during_initial_mark_pause(); |
| // We do not allow mixed GCs during marking. |
| if (!gcs_are_young()) { |
| set_gcs_are_young(true); |
| ergo_verbose0(ErgoMixedGCs, |
| "end mixed GCs", |
| ergo_format_reason("concurrent cycle is about to start")); |
| } |
| |
| // And we can now clear initiate_conc_mark_if_possible() as |
| // we've already acted on it. |
| clear_initiate_conc_mark_if_possible(); |
| |
| ergo_verbose0(ErgoConcCycles, |
| "initiate concurrent cycle", |
| ergo_format_reason("concurrent cycle initiation requested")); |
| } else { |
| // The concurrent marking thread is still finishing up the |
| // previous cycle. If we start one right now the two cycles |
| // overlap. In particular, the concurrent marking thread might |
| // be in the process of clearing the next marking bitmap (which |
| // we will use for the next cycle if we start one). Starting a |
| // cycle now will be bad given that parts of the marking |
| // information might get cleared by the marking thread. And we |
| // cannot wait for the marking thread to finish the cycle as it |
| // periodically yields while clearing the next marking bitmap |
| // and, if it's in a yield point, it's waiting for us to |
| // finish. So, at this point we will not start a cycle and we'll |
| // let the concurrent marking thread complete the last one. |
| ergo_verbose0(ErgoConcCycles, |
| "do not initiate concurrent cycle", |
| ergo_format_reason("concurrent cycle already in progress")); |
| } |
| } |
| } |
| |
| class KnownGarbageClosure: public HeapRegionClosure { |
| G1CollectedHeap* _g1h; |
| CollectionSetChooser* _hrSorted; |
| |
| public: |
| KnownGarbageClosure(CollectionSetChooser* hrSorted) : |
| _g1h(G1CollectedHeap::heap()), _hrSorted(hrSorted) { } |
| |
| bool doHeapRegion(HeapRegion* r) { |
| // We only include humongous regions in collection |
| // sets when concurrent mark shows that their contained object is |
| // unreachable. |
| |
| // Do we have any marking information for this region? |
| if (r->is_marked()) { |
| // We will skip any region that's currently used as an old GC |
| // alloc region (we should not consider those for collection |
| // before we fill them up). |
| if (_hrSorted->should_add(r) && !_g1h->is_old_gc_alloc_region(r)) { |
| _hrSorted->add_region(r); |
| } |
| } |
| return false; |
| } |
| }; |
| |
| class ParKnownGarbageHRClosure: public HeapRegionClosure { |
| G1CollectedHeap* _g1h; |
| CSetChooserParUpdater _cset_updater; |
| |
| public: |
| ParKnownGarbageHRClosure(CollectionSetChooser* hrSorted, |
| uint chunk_size) : |
| _g1h(G1CollectedHeap::heap()), |
| _cset_updater(hrSorted, true /* parallel */, chunk_size) { } |
| |
| bool doHeapRegion(HeapRegion* r) { |
| // Do we have any marking information for this region? |
| if (r->is_marked()) { |
| // We will skip any region that's currently used as an old GC |
| // alloc region (we should not consider those for collection |
| // before we fill them up). |
| if (_cset_updater.should_add(r) && !_g1h->is_old_gc_alloc_region(r)) { |
| _cset_updater.add_region(r); |
| } |
| } |
| return false; |
| } |
| }; |
| |
| class ParKnownGarbageTask: public AbstractGangTask { |
| CollectionSetChooser* _hrSorted; |
| uint _chunk_size; |
| G1CollectedHeap* _g1; |
| public: |
| ParKnownGarbageTask(CollectionSetChooser* hrSorted, uint chunk_size) : |
| AbstractGangTask("ParKnownGarbageTask"), |
| _hrSorted(hrSorted), _chunk_size(chunk_size), |
| _g1(G1CollectedHeap::heap()) { } |
| |
| void work(uint worker_id) { |
| ParKnownGarbageHRClosure parKnownGarbageCl(_hrSorted, _chunk_size); |
| |
| // Back to zero for the claim value. |
| _g1->heap_region_par_iterate_chunked(&parKnownGarbageCl, worker_id, |
| _g1->workers()->active_workers(), |
| HeapRegion::InitialClaimValue); |
| } |
| }; |
| |
| void |
| G1CollectorPolicy::record_concurrent_mark_cleanup_end(int no_of_gc_threads) { |
| _collectionSetChooser->clear(); |
| |
| uint region_num = _g1->num_regions(); |
| if (G1CollectedHeap::use_parallel_gc_threads()) { |
| const uint OverpartitionFactor = 4; |
| uint WorkUnit; |
| // The use of MinChunkSize = 8 in the original code |
| // causes some assertion failures when the total number of |
| // region is less than 8. The code here tries to fix that. |
| // Should the original code also be fixed? |
| if (no_of_gc_threads > 0) { |
| const uint MinWorkUnit = MAX2(region_num / no_of_gc_threads, 1U); |
| WorkUnit = MAX2(region_num / (no_of_gc_threads * OverpartitionFactor), |
| MinWorkUnit); |
| } else { |
| assert(no_of_gc_threads > 0, |
| "The active gc workers should be greater than 0"); |
| // In a product build do something reasonable to avoid a crash. |
| const uint MinWorkUnit = MAX2(region_num / (uint) ParallelGCThreads, 1U); |
| WorkUnit = |
| MAX2(region_num / (uint) (ParallelGCThreads * OverpartitionFactor), |
| MinWorkUnit); |
| } |
| _collectionSetChooser->prepare_for_par_region_addition(_g1->num_regions(), |
| WorkUnit); |
| ParKnownGarbageTask parKnownGarbageTask(_collectionSetChooser, |
| (int) WorkUnit); |
| _g1->workers()->run_task(&parKnownGarbageTask); |
| |
| assert(_g1->check_heap_region_claim_values(HeapRegion::InitialClaimValue), |
| "sanity check"); |
| } else { |
| KnownGarbageClosure knownGarbagecl(_collectionSetChooser); |
| _g1->heap_region_iterate(&knownGarbagecl); |
| } |
| |
| _collectionSetChooser->sort_regions(); |
| |
| double end_sec = os::elapsedTime(); |
| double elapsed_time_ms = (end_sec - _mark_cleanup_start_sec) * 1000.0; |
| _concurrent_mark_cleanup_times_ms->add(elapsed_time_ms); |
| _cur_mark_stop_world_time_ms += elapsed_time_ms; |
| _prev_collection_pause_end_ms += elapsed_time_ms; |
| _mmu_tracker->add_pause(_mark_cleanup_start_sec, end_sec, true); |
| } |
| |
| // Add the heap region at the head of the non-incremental collection set |
| void G1CollectorPolicy::add_old_region_to_cset(HeapRegion* hr) { |
| assert(_inc_cset_build_state == Active, "Precondition"); |
| assert(hr->is_old(), "the region should be old"); |
| |
| assert(!hr->in_collection_set(), "should not already be in the CSet"); |
| hr->set_in_collection_set(true); |
| hr->set_next_in_collection_set(_collection_set); |
| _collection_set = hr; |
| _collection_set_bytes_used_before += hr->used(); |
| _g1->register_old_region_with_in_cset_fast_test(hr); |
| size_t rs_length = hr->rem_set()->occupied(); |
| _recorded_rs_lengths += rs_length; |
| _old_cset_region_length += 1; |
| } |
| |
| // Initialize the per-collection-set information |
| void G1CollectorPolicy::start_incremental_cset_building() { |
| assert(_inc_cset_build_state == Inactive, "Precondition"); |
| |
| _inc_cset_head = NULL; |
| _inc_cset_tail = NULL; |
| _inc_cset_bytes_used_before = 0; |
| |
| _inc_cset_max_finger = 0; |
| _inc_cset_recorded_rs_lengths = 0; |
| _inc_cset_recorded_rs_lengths_diffs = 0; |
| _inc_cset_predicted_elapsed_time_ms = 0.0; |
| _inc_cset_predicted_elapsed_time_ms_diffs = 0.0; |
| _inc_cset_build_state = Active; |
| } |
| |
| void G1CollectorPolicy::finalize_incremental_cset_building() { |
| assert(_inc_cset_build_state == Active, "Precondition"); |
| assert(SafepointSynchronize::is_at_safepoint(), "should be at a safepoint"); |
| |
| // The two "main" fields, _inc_cset_recorded_rs_lengths and |
| // _inc_cset_predicted_elapsed_time_ms, are updated by the thread |
| // that adds a new region to the CSet. Further updates by the |
| // concurrent refinement thread that samples the young RSet lengths |
| // are accumulated in the *_diffs fields. Here we add the diffs to |
| // the "main" fields. |
| |
| if (_inc_cset_recorded_rs_lengths_diffs >= 0) { |
| _inc_cset_recorded_rs_lengths += _inc_cset_recorded_rs_lengths_diffs; |
| } else { |
| // This is defensive. The diff should in theory be always positive |
| // as RSets can only grow between GCs. However, given that we |
| // sample their size concurrently with other threads updating them |
| // it's possible that we might get the wrong size back, which |
| // could make the calculations somewhat inaccurate. |
| size_t diffs = (size_t) (-_inc_cset_recorded_rs_lengths_diffs); |
| if (_inc_cset_recorded_rs_lengths >= diffs) { |
| _inc_cset_recorded_rs_lengths -= diffs; |
| } else { |
| _inc_cset_recorded_rs_lengths = 0; |
| } |
| } |
| _inc_cset_predicted_elapsed_time_ms += |
| _inc_cset_predicted_elapsed_time_ms_diffs; |
| |
| _inc_cset_recorded_rs_lengths_diffs = 0; |
| _inc_cset_predicted_elapsed_time_ms_diffs = 0.0; |
| } |
| |
| void G1CollectorPolicy::add_to_incremental_cset_info(HeapRegion* hr, size_t rs_length) { |
| // This routine is used when: |
| // * adding survivor regions to the incremental cset at the end of an |
| // evacuation pause, |
| // * adding the current allocation region to the incremental cset |
| // when it is retired, and |
| // * updating existing policy information for a region in the |
| // incremental cset via young list RSet sampling. |
| // Therefore this routine may be called at a safepoint by the |
| // VM thread, or in-between safepoints by mutator threads (when |
| // retiring the current allocation region) or a concurrent |
| // refine thread (RSet sampling). |
| |
| double region_elapsed_time_ms = predict_region_elapsed_time_ms(hr, gcs_are_young()); |
| size_t used_bytes = hr->used(); |
| _inc_cset_recorded_rs_lengths += rs_length; |
| _inc_cset_predicted_elapsed_time_ms += region_elapsed_time_ms; |
| _inc_cset_bytes_used_before += used_bytes; |
| |
| // Cache the values we have added to the aggregated informtion |
| // in the heap region in case we have to remove this region from |
| // the incremental collection set, or it is updated by the |
| // rset sampling code |
| hr->set_recorded_rs_length(rs_length); |
| hr->set_predicted_elapsed_time_ms(region_elapsed_time_ms); |
| } |
| |
| void G1CollectorPolicy::update_incremental_cset_info(HeapRegion* hr, |
| size_t new_rs_length) { |
| // Update the CSet information that is dependent on the new RS length |
| assert(hr->is_young(), "Precondition"); |
| assert(!SafepointSynchronize::is_at_safepoint(), |
| "should not be at a safepoint"); |
| |
| // We could have updated _inc_cset_recorded_rs_lengths and |
| // _inc_cset_predicted_elapsed_time_ms directly but we'd need to do |
| // that atomically, as this code is executed by a concurrent |
| // refinement thread, potentially concurrently with a mutator thread |
| // allocating a new region and also updating the same fields. To |
| // avoid the atomic operations we accumulate these updates on two |
| // separate fields (*_diffs) and we'll just add them to the "main" |
| // fields at the start of a GC. |
| |
| ssize_t old_rs_length = (ssize_t) hr->recorded_rs_length(); |
| ssize_t rs_lengths_diff = (ssize_t) new_rs_length - old_rs_length; |
| _inc_cset_recorded_rs_lengths_diffs += rs_lengths_diff; |
| |
| double old_elapsed_time_ms = hr->predicted_elapsed_time_ms(); |
| double new_region_elapsed_time_ms = predict_region_elapsed_time_ms(hr, gcs_are_young()); |
| double elapsed_ms_diff = new_region_elapsed_time_ms - old_elapsed_time_ms; |
| _inc_cset_predicted_elapsed_time_ms_diffs += elapsed_ms_diff; |
| |
| hr->set_recorded_rs_length(new_rs_length); |
| hr->set_predicted_elapsed_time_ms(new_region_elapsed_time_ms); |
| } |
| |
| void G1CollectorPolicy::add_region_to_incremental_cset_common(HeapRegion* hr) { |
| assert(hr->is_young(), "invariant"); |
| assert(hr->young_index_in_cset() > -1, "should have already been set"); |
| assert(_inc_cset_build_state == Active, "Precondition"); |
| |
| // We need to clear and set the cached recorded/cached collection set |
| // information in the heap region here (before the region gets added |
| // to the collection set). An individual heap region's cached values |
| // are calculated, aggregated with the policy collection set info, |
| // and cached in the heap region here (initially) and (subsequently) |
| // by the Young List sampling code. |
| |
| size_t rs_length = hr->rem_set()->occupied(); |
| add_to_incremental_cset_info(hr, rs_length); |
| |
| HeapWord* hr_end = hr->end(); |
| _inc_cset_max_finger = MAX2(_inc_cset_max_finger, hr_end); |
| |
| assert(!hr->in_collection_set(), "invariant"); |
| hr->set_in_collection_set(true); |
| assert( hr->next_in_collection_set() == NULL, "invariant"); |
| |
| _g1->register_young_region_with_in_cset_fast_test(hr); |
| } |
| |
| // Add the region at the RHS of the incremental cset |
| void G1CollectorPolicy::add_region_to_incremental_cset_rhs(HeapRegion* hr) { |
| // We should only ever be appending survivors at the end of a pause |
| assert(hr->is_survivor(), "Logic"); |
| |
| // Do the 'common' stuff |
| add_region_to_incremental_cset_common(hr); |
| |
| // Now add the region at the right hand side |
| if (_inc_cset_tail == NULL) { |
| assert(_inc_cset_head == NULL, "invariant"); |
| _inc_cset_head = hr; |
| } else { |
| _inc_cset_tail->set_next_in_collection_set(hr); |
| } |
| _inc_cset_tail = hr; |
| } |
| |
| // Add the region to the LHS of the incremental cset |
| void G1CollectorPolicy::add_region_to_incremental_cset_lhs(HeapRegion* hr) { |
| // Survivors should be added to the RHS at the end of a pause |
| assert(hr->is_eden(), "Logic"); |
| |
| // Do the 'common' stuff |
| add_region_to_incremental_cset_common(hr); |
| |
| // Add the region at the left hand side |
| hr->set_next_in_collection_set(_inc_cset_head); |
| if (_inc_cset_head == NULL) { |
| assert(_inc_cset_tail == NULL, "Invariant"); |
| _inc_cset_tail = hr; |
| } |
| _inc_cset_head = hr; |
| } |
| |
| #ifndef PRODUCT |
| void G1CollectorPolicy::print_collection_set(HeapRegion* list_head, outputStream* st) { |
| assert(list_head == inc_cset_head() || list_head == collection_set(), "must be"); |
| |
| st->print_cr("\nCollection_set:"); |
| HeapRegion* csr = list_head; |
| while (csr != NULL) { |
| HeapRegion* next = csr->next_in_collection_set(); |
| assert(csr->in_collection_set(), "bad CS"); |
| st->print_cr(" "HR_FORMAT", P: "PTR_FORMAT "N: "PTR_FORMAT", age: %4d", |
| HR_FORMAT_PARAMS(csr), |
| csr->prev_top_at_mark_start(), csr->next_top_at_mark_start(), |
| csr->age_in_surv_rate_group_cond()); |
| csr = next; |
| } |
| } |
| #endif // !PRODUCT |
| |
| double G1CollectorPolicy::reclaimable_bytes_perc(size_t reclaimable_bytes) { |
| // Returns the given amount of reclaimable bytes (that represents |
| // the amount of reclaimable space still to be collected) as a |
| // percentage of the current heap capacity. |
| size_t capacity_bytes = _g1->capacity(); |
| return (double) reclaimable_bytes * 100.0 / (double) capacity_bytes; |
| } |
| |
| bool G1CollectorPolicy::next_gc_should_be_mixed(const char* true_action_str, |
| const char* false_action_str) { |
| CollectionSetChooser* cset_chooser = _collectionSetChooser; |
| if (cset_chooser->is_empty()) { |
| ergo_verbose0(ErgoMixedGCs, |
| false_action_str, |
| ergo_format_reason("candidate old regions not available")); |
| return false; |
| } |
| |
| // Is the amount of uncollected reclaimable space above G1HeapWastePercent? |
| size_t reclaimable_bytes = cset_chooser->remaining_reclaimable_bytes(); |
| double reclaimable_perc = reclaimable_bytes_perc(reclaimable_bytes); |
| double threshold = (double) G1HeapWastePercent; |
| if (reclaimable_perc <= threshold) { |
| ergo_verbose4(ErgoMixedGCs, |
| false_action_str, |
| ergo_format_reason("reclaimable percentage not over threshold") |
| ergo_format_region("candidate old regions") |
| ergo_format_byte_perc("reclaimable") |
| ergo_format_perc("threshold"), |
| cset_chooser->remaining_regions(), |
| reclaimable_bytes, |
| reclaimable_perc, threshold); |
| return false; |
| } |
| |
| ergo_verbose4(ErgoMixedGCs, |
| true_action_str, |
| ergo_format_reason("candidate old regions available") |
| ergo_format_region("candidate old regions") |
| ergo_format_byte_perc("reclaimable") |
| ergo_format_perc("threshold"), |
| cset_chooser->remaining_regions(), |
| reclaimable_bytes, |
| reclaimable_perc, threshold); |
| return true; |
| } |
| |
| uint G1CollectorPolicy::calc_min_old_cset_length() { |
| // The min old CSet region bound is based on the maximum desired |
| // number of mixed GCs after a cycle. I.e., even if some old regions |
| // look expensive, we should add them to the CSet anyway to make |
| // sure we go through the available old regions in no more than the |
| // maximum desired number of mixed GCs. |
| // |
| // The calculation is based on the number of marked regions we added |
| // to the CSet chooser in the first place, not how many remain, so |
| // that the result is the same during all mixed GCs that follow a cycle. |
| |
| const size_t region_num = (size_t) _collectionSetChooser->length(); |
| const size_t gc_num = (size_t) MAX2(G1MixedGCCountTarget, (uintx) 1); |
| size_t result = region_num / gc_num; |
| // emulate ceiling |
| if (result * gc_num < region_num) { |
| result += 1; |
| } |
| return (uint) result; |
| } |
| |
| uint G1CollectorPolicy::calc_max_old_cset_length() { |
| // The max old CSet region bound is based on the threshold expressed |
| // as a percentage of the heap size. I.e., it should bound the |
| // number of old regions added to the CSet irrespective of how many |
| // of them are available. |
| |
| G1CollectedHeap* g1h = G1CollectedHeap::heap(); |
| const size_t region_num = g1h->num_regions(); |
| const size_t perc = (size_t) G1OldCSetRegionThresholdPercent; |
| size_t result = region_num * perc / 100; |
| // emulate ceiling |
| if (100 * result < region_num * perc) { |
| result += 1; |
| } |
| return (uint) result; |
| } |
| |
| |
| void G1CollectorPolicy::finalize_cset(double target_pause_time_ms, EvacuationInfo& evacuation_info) { |
| double young_start_time_sec = os::elapsedTime(); |
| |
| YoungList* young_list = _g1->young_list(); |
| finalize_incremental_cset_building(); |
| |
| guarantee(target_pause_time_ms > 0.0, |
| err_msg("target_pause_time_ms = %1.6lf should be positive", |
| target_pause_time_ms)); |
| guarantee(_collection_set == NULL, "Precondition"); |
| |
| double base_time_ms = predict_base_elapsed_time_ms(_pending_cards); |
| double predicted_pause_time_ms = base_time_ms; |
| double time_remaining_ms = MAX2(target_pause_time_ms - base_time_ms, 0.0); |
| |
| ergo_verbose4(ErgoCSetConstruction | ErgoHigh, |
| "start choosing CSet", |
| ergo_format_size("_pending_cards") |
| ergo_format_ms("predicted base time") |
| ergo_format_ms("remaining time") |
| ergo_format_ms("target pause time"), |
| _pending_cards, base_time_ms, time_remaining_ms, target_pause_time_ms); |
| |
| _last_gc_was_young = gcs_are_young() ? true : false; |
| |
| if (_last_gc_was_young) { |
| _trace_gen0_time_data.increment_young_collection_count(); |
| } else { |
| _trace_gen0_time_data.increment_mixed_collection_count(); |
| } |
| |
| // The young list is laid with the survivor regions from the previous |
| // pause are appended to the RHS of the young list, i.e. |
| // [Newly Young Regions ++ Survivors from last pause]. |
| |
| uint survivor_region_length = young_list->survivor_length(); |
| uint eden_region_length = young_list->length() - survivor_region_length; |
| init_cset_region_lengths(eden_region_length, survivor_region_length); |
| |
| HeapRegion* hr = young_list->first_survivor_region(); |
| while (hr != NULL) { |
| assert(hr->is_survivor(), "badly formed young list"); |
| // There is a convention that all the young regions in the CSet |
| // are tagged as "eden", so we do this for the survivors here. We |
| // use the special set_eden_pre_gc() as it doesn't check that the |
| // region is free (which is not the case here). |
| hr->set_eden_pre_gc(); |
| hr = hr->get_next_young_region(); |
| } |
| |
| // Clear the fields that point to the survivor list - they are all young now. |
| young_list->clear_survivors(); |
| |
| _collection_set = _inc_cset_head; |
| _collection_set_bytes_used_before = _inc_cset_bytes_used_before; |
| time_remaining_ms = MAX2(time_remaining_ms - _inc_cset_predicted_elapsed_time_ms, 0.0); |
| predicted_pause_time_ms += _inc_cset_predicted_elapsed_time_ms; |
| |
| ergo_verbose3(ErgoCSetConstruction | ErgoHigh, |
| "add young regions to CSet", |
| ergo_format_region("eden") |
| ergo_format_region("survivors") |
| ergo_format_ms("predicted young region time"), |
| eden_region_length, survivor_region_length, |
| _inc_cset_predicted_elapsed_time_ms); |
| |
| // The number of recorded young regions is the incremental |
| // collection set's current size |
| set_recorded_rs_lengths(_inc_cset_recorded_rs_lengths); |
| |
| double young_end_time_sec = os::elapsedTime(); |
| phase_times()->record_young_cset_choice_time_ms((young_end_time_sec - young_start_time_sec) * 1000.0); |
| |
| // Set the start of the non-young choice time. |
| double non_young_start_time_sec = young_end_time_sec; |
| |
| if (!gcs_are_young()) { |
| CollectionSetChooser* cset_chooser = _collectionSetChooser; |
| cset_chooser->verify(); |
| const uint min_old_cset_length = calc_min_old_cset_length(); |
| const uint max_old_cset_length = calc_max_old_cset_length(); |
| |
| uint expensive_region_num = 0; |
| bool check_time_remaining = adaptive_young_list_length(); |
| |
| HeapRegion* hr = cset_chooser->peek(); |
| while (hr != NULL) { |
| if (old_cset_region_length() >= max_old_cset_length) { |
| // Added maximum number of old regions to the CSet. |
| ergo_verbose2(ErgoCSetConstruction, |
| "finish adding old regions to CSet", |
| ergo_format_reason("old CSet region num reached max") |
| ergo_format_region("old") |
| ergo_format_region("max"), |
| old_cset_region_length(), max_old_cset_length); |
| break; |
| } |
| |
| |
| // Stop adding regions if the remaining reclaimable space is |
| // not above G1HeapWastePercent. |
| size_t reclaimable_bytes = cset_chooser->remaining_reclaimable_bytes(); |
| double reclaimable_perc = reclaimable_bytes_perc(reclaimable_bytes); |
| double threshold = (double) G1HeapWastePercent; |
| if (reclaimable_perc <= threshold) { |
| // We've added enough old regions that the amount of uncollected |
| // reclaimable space is at or below the waste threshold. Stop |
| // adding old regions to the CSet. |
| ergo_verbose5(ErgoCSetConstruction, |
| "finish adding old regions to CSet", |
| ergo_format_reason("reclaimable percentage not over threshold") |
| ergo_format_region("old") |
| ergo_format_region("max") |
| ergo_format_byte_perc("reclaimable") |
| ergo_format_perc("threshold"), |
| old_cset_region_length(), |
| max_old_cset_length, |
| reclaimable_bytes, |
| reclaimable_perc, threshold); |
| break; |
| } |
| |
| double predicted_time_ms = predict_region_elapsed_time_ms(hr, gcs_are_young()); |
| if (check_time_remaining) { |
| if (predicted_time_ms > time_remaining_ms) { |
| // Too expensive for the current CSet. |
| |
| if (old_cset_region_length() >= min_old_cset_length) { |
| // We have added the minimum number of old regions to the CSet, |
| // we are done with this CSet. |
| ergo_verbose4(ErgoCSetConstruction, |
| "finish adding old regions to CSet", |
| ergo_format_reason("predicted time is too high") |
| ergo_format_ms("predicted time") |
| ergo_format_ms("remaining time") |
| ergo_format_region("old") |
| ergo_format_region("min"), |
| predicted_time_ms, time_remaining_ms, |
| old_cset_region_length(), min_old_cset_length); |
| break; |
| } |
| |
| // We'll add it anyway given that we haven't reached the |
| // minimum number of old regions. |
| expensive_region_num += 1; |
| } |
| } else { |
| if (old_cset_region_length() >= min_old_cset_length) { |
| // In the non-auto-tuning case, we'll finish adding regions |
| // to the CSet if we reach the minimum. |
| ergo_verbose2(ErgoCSetConstruction, |
| "finish adding old regions to CSet", |
| ergo_format_reason("old CSet region num reached min") |
| ergo_format_region("old") |
| ergo_format_region("min"), |
| old_cset_region_length(), min_old_cset_length); |
| break; |
| } |
| } |
| |
| // We will add this region to the CSet. |
| time_remaining_ms = MAX2(time_remaining_ms - predicted_time_ms, 0.0); |
| predicted_pause_time_ms += predicted_time_ms; |
| cset_chooser->remove_and_move_to_next(hr); |
| _g1->old_set_remove(hr); |
| add_old_region_to_cset(hr); |
| |
| hr = cset_chooser->peek(); |
| } |
| if (hr == NULL) { |
| ergo_verbose0(ErgoCSetConstruction, |
| "finish adding old regions to CSet", |
| ergo_format_reason("candidate old regions not available")); |
| } |
| |
| if (expensive_region_num > 0) { |
| // We print the information once here at the end, predicated on |
| // whether we added any apparently expensive regions or not, to |
| // avoid generating output per region. |
| ergo_verbose4(ErgoCSetConstruction, |
| "added expensive regions to CSet", |
| ergo_format_reason("old CSet region num not reached min") |
| ergo_format_region("old") |
| ergo_format_region("expensive") |
| ergo_format_region("min") |
| ergo_format_ms("remaining time"), |
| old_cset_region_length(), |
| expensive_region_num, |
| min_old_cset_length, |
| time_remaining_ms); |
| } |
| |
| cset_chooser->verify(); |
| } |
| |
| stop_incremental_cset_building(); |
| |
| ergo_verbose5(ErgoCSetConstruction, |
| "finish choosing CSet", |
| ergo_format_region("eden") |
| ergo_format_region("survivors") |
| ergo_format_region("old") |
| ergo_format_ms("predicted pause time") |
| ergo_format_ms("target pause time"), |
| eden_region_length, survivor_region_length, |
| old_cset_region_length(), |
| predicted_pause_time_ms, target_pause_time_ms); |
| |
| double non_young_end_time_sec = os::elapsedTime(); |
| phase_times()->record_non_young_cset_choice_time_ms((non_young_end_time_sec - non_young_start_time_sec) * 1000.0); |
| evacuation_info.set_collectionset_regions(cset_region_length()); |
| } |
| |
| void TraceGen0TimeData::record_start_collection(double time_to_stop_the_world_ms) { |
| if(TraceGen0Time) { |
| _all_stop_world_times_ms.add(time_to_stop_the_world_ms); |
| } |
| } |
| |
| void TraceGen0TimeData::record_yield_time(double yield_time_ms) { |
| if(TraceGen0Time) { |
| _all_yield_times_ms.add(yield_time_ms); |
| } |
| } |
| |
| void TraceGen0TimeData::record_end_collection(double pause_time_ms, G1GCPhaseTimes* phase_times) { |
| if(TraceGen0Time) { |
| _total.add(pause_time_ms); |
| _other.add(pause_time_ms - phase_times->accounted_time_ms()); |
| _root_region_scan_wait.add(phase_times->root_region_scan_wait_time_ms()); |
| _parallel.add(phase_times->cur_collection_par_time_ms()); |
| _ext_root_scan.add(phase_times->average_time_ms(G1GCPhaseTimes::ExtRootScan)); |
| _satb_filtering.add(phase_times->average_time_ms(G1GCPhaseTimes::SATBFiltering)); |
| _update_rs.add(phase_times->average_time_ms(G1GCPhaseTimes::UpdateRS)); |
| _scan_rs.add(phase_times->average_time_ms(G1GCPhaseTimes::ScanRS)); |
| _obj_copy.add(phase_times->average_time_ms(G1GCPhaseTimes::ObjCopy)); |
| _termination.add(phase_times->average_time_ms(G1GCPhaseTimes::Termination)); |
| |
| double parallel_known_time = phase_times->average_time_ms(G1GCPhaseTimes::ExtRootScan) + |
| phase_times->average_time_ms(G1GCPhaseTimes::SATBFiltering) + |
| phase_times->average_time_ms(G1GCPhaseTimes::UpdateRS) + |
| phase_times->average_time_ms(G1GCPhaseTimes::ScanRS) + |
| phase_times->average_time_ms(G1GCPhaseTimes::ObjCopy) + |
| phase_times->average_time_ms(G1GCPhaseTimes::Termination); |
| |
| double parallel_other_time = phase_times->cur_collection_par_time_ms() - parallel_known_time; |
| _parallel_other.add(parallel_other_time); |
| _clear_ct.add(phase_times->cur_clear_ct_time_ms()); |
| } |
| } |
| |
| void TraceGen0TimeData::increment_young_collection_count() { |
| if(TraceGen0Time) { |
| ++_young_pause_num; |
| } |
| } |
| |
| void TraceGen0TimeData::increment_mixed_collection_count() { |
| if(TraceGen0Time) { |
| ++_mixed_pause_num; |
| } |
| } |
| |
| void TraceGen0TimeData::print_summary(const char* str, |
| const NumberSeq* seq) const { |
| double sum = seq->sum(); |
| gclog_or_tty->print_cr("%-27s = %8.2lf s (avg = %8.2lf ms)", |
| str, sum / 1000.0, seq->avg()); |
| } |
| |
| void TraceGen0TimeData::print_summary_sd(const char* str, |
| const NumberSeq* seq) const { |
| print_summary(str, seq); |
| gclog_or_tty->print_cr("%+45s = %5d, std dev = %8.2lf ms, max = %8.2lf ms)", |
| "(num", seq->num(), seq->sd(), seq->maximum()); |
| } |
| |
| void TraceGen0TimeData::print() const { |
| if (!TraceGen0Time) { |
| return; |
| } |
| |
| gclog_or_tty->print_cr("ALL PAUSES"); |
| print_summary_sd(" Total", &_total); |
| gclog_or_tty->cr(); |
| gclog_or_tty->cr(); |
| gclog_or_tty->print_cr(" Young GC Pauses: %8d", _young_pause_num); |
| gclog_or_tty->print_cr(" Mixed GC Pauses: %8d", _mixed_pause_num); |
| gclog_or_tty->cr(); |
| |
| gclog_or_tty->print_cr("EVACUATION PAUSES"); |
| |
| if (_young_pause_num == 0 && _mixed_pause_num == 0) { |
| gclog_or_tty->print_cr("none"); |
| } else { |
| print_summary_sd(" Evacuation Pauses", &_total); |
| print_summary(" Root Region Scan Wait", &_root_region_scan_wait); |
| print_summary(" Parallel Time", &_parallel); |
| print_summary(" Ext Root Scanning", &_ext_root_scan); |
| print_summary(" SATB Filtering", &_satb_filtering); |
| print_summary(" Update RS", &_update_rs); |
| print_summary(" Scan RS", &_scan_rs); |
| print_summary(" Object Copy", &_obj_copy); |
| print_summary(" Termination", &_termination); |
| print_summary(" Parallel Other", &_parallel_other); |
| print_summary(" Clear CT", &_clear_ct); |
| print_summary(" Other", &_other); |
| } |
| gclog_or_tty->cr(); |
| |
| gclog_or_tty->print_cr("MISC"); |
| print_summary_sd(" Stop World", &_all_stop_world_times_ms); |
| print_summary_sd(" Yields", &_all_yield_times_ms); |
| } |
| |
| void TraceGen1TimeData::record_full_collection(double full_gc_time_ms) { |
| if (TraceGen1Time) { |
| _all_full_gc_times.add(full_gc_time_ms); |
| } |
| } |
| |
| void TraceGen1TimeData::print() const { |
| if (!TraceGen1Time) { |
| return; |
| } |
| |
| if (_all_full_gc_times.num() > 0) { |
| gclog_or_tty->print("\n%4d full_gcs: total time = %8.2f s", |
| _all_full_gc_times.num(), |
| _all_full_gc_times.sum() / 1000.0); |
| gclog_or_tty->print_cr(" (avg = %8.2fms).", _all_full_gc_times.avg()); |
| gclog_or_tty->print_cr(" [std. dev = %8.2f ms, max = %8.2f ms]", |
| _all_full_gc_times.sd(), |
| _all_full_gc_times.maximum()); |
| } |
| } |