| /* |
| * Copyright (c) 1997, 2018, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "precompiled.hpp" |
| #include "jvm.h" |
| #include "classfile/systemDictionary.hpp" |
| #include "code/codeCache.hpp" |
| #include "code/debugInfoRec.hpp" |
| #include "code/nmethod.hpp" |
| #include "code/pcDesc.hpp" |
| #include "code/scopeDesc.hpp" |
| #include "interpreter/bytecode.hpp" |
| #include "interpreter/interpreter.hpp" |
| #include "interpreter/oopMapCache.hpp" |
| #include "memory/allocation.inline.hpp" |
| #include "memory/oopFactory.hpp" |
| #include "memory/resourceArea.hpp" |
| #include "oops/method.hpp" |
| #include "oops/objArrayOop.inline.hpp" |
| #include "oops/oop.inline.hpp" |
| #include "oops/fieldStreams.hpp" |
| #include "oops/typeArrayOop.inline.hpp" |
| #include "oops/verifyOopClosure.hpp" |
| #include "prims/jvmtiThreadState.hpp" |
| #include "runtime/biasedLocking.hpp" |
| #include "runtime/compilationPolicy.hpp" |
| #include "runtime/deoptimization.hpp" |
| #include "runtime/frame.inline.hpp" |
| #include "runtime/interfaceSupport.inline.hpp" |
| #include "runtime/safepointVerifiers.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/signature.hpp" |
| #include "runtime/stubRoutines.hpp" |
| #include "runtime/thread.hpp" |
| #include "runtime/threadSMR.hpp" |
| #include "runtime/threadWXSetters.inline.hpp" |
| #include "runtime/vframe.hpp" |
| #include "runtime/vframeArray.hpp" |
| #include "runtime/vframe_hp.hpp" |
| #include "utilities/events.hpp" |
| #include "utilities/preserveException.hpp" |
| #include "utilities/xmlstream.hpp" |
| |
| #if INCLUDE_JVMCI |
| #include "jvmci/jvmciRuntime.hpp" |
| #include "jvmci/jvmciJavaClasses.hpp" |
| #endif |
| |
| |
| bool DeoptimizationMarker::_is_active = false; |
| |
| Deoptimization::UnrollBlock::UnrollBlock(int size_of_deoptimized_frame, |
| int caller_adjustment, |
| int caller_actual_parameters, |
| int number_of_frames, |
| intptr_t* frame_sizes, |
| address* frame_pcs, |
| BasicType return_type, |
| int exec_mode) { |
| _size_of_deoptimized_frame = size_of_deoptimized_frame; |
| _caller_adjustment = caller_adjustment; |
| _caller_actual_parameters = caller_actual_parameters; |
| _number_of_frames = number_of_frames; |
| _frame_sizes = frame_sizes; |
| _frame_pcs = frame_pcs; |
| _register_block = NEW_C_HEAP_ARRAY(intptr_t, RegisterMap::reg_count * 2, mtCompiler); |
| _return_type = return_type; |
| _initial_info = 0; |
| // PD (x86 only) |
| _counter_temp = 0; |
| _unpack_kind = exec_mode; |
| _sender_sp_temp = 0; |
| |
| _total_frame_sizes = size_of_frames(); |
| assert(exec_mode >= 0 && exec_mode < Unpack_LIMIT, "Unexpected exec_mode"); |
| } |
| |
| |
| Deoptimization::UnrollBlock::~UnrollBlock() { |
| FREE_C_HEAP_ARRAY(intptr_t, _frame_sizes); |
| FREE_C_HEAP_ARRAY(intptr_t, _frame_pcs); |
| FREE_C_HEAP_ARRAY(intptr_t, _register_block); |
| } |
| |
| |
| intptr_t* Deoptimization::UnrollBlock::value_addr_at(int register_number) const { |
| assert(register_number < RegisterMap::reg_count, "checking register number"); |
| return &_register_block[register_number * 2]; |
| } |
| |
| |
| |
| int Deoptimization::UnrollBlock::size_of_frames() const { |
| // Acount first for the adjustment of the initial frame |
| int result = _caller_adjustment; |
| for (int index = 0; index < number_of_frames(); index++) { |
| result += frame_sizes()[index]; |
| } |
| return result; |
| } |
| |
| |
| void Deoptimization::UnrollBlock::print() { |
| ttyLocker ttyl; |
| tty->print_cr("UnrollBlock"); |
| tty->print_cr(" size_of_deoptimized_frame = %d", _size_of_deoptimized_frame); |
| tty->print( " frame_sizes: "); |
| for (int index = 0; index < number_of_frames(); index++) { |
| tty->print(INTX_FORMAT " ", frame_sizes()[index]); |
| } |
| tty->cr(); |
| } |
| |
| |
| // In order to make fetch_unroll_info work properly with escape |
| // analysis, The method was changed from JRT_LEAF to JRT_BLOCK_ENTRY and |
| // ResetNoHandleMark and HandleMark were removed from it. The actual reallocation |
| // of previously eliminated objects occurs in realloc_objects, which is |
| // called from the method fetch_unroll_info_helper below. |
| JRT_BLOCK_ENTRY(Deoptimization::UnrollBlock*, Deoptimization::fetch_unroll_info(JavaThread* thread, int exec_mode)) |
| // It is actually ok to allocate handles in a leaf method. It causes no safepoints, |
| // but makes the entry a little slower. There is however a little dance we have to |
| // do in debug mode to get around the NoHandleMark code in the JRT_LEAF macro |
| |
| // fetch_unroll_info() is called at the beginning of the deoptimization |
| // handler. Note this fact before we start generating temporary frames |
| // that can confuse an asynchronous stack walker. This counter is |
| // decremented at the end of unpack_frames(). |
| if (TraceDeoptimization) { |
| tty->print_cr("Deoptimizing thread " INTPTR_FORMAT, p2i(thread)); |
| } |
| thread->inc_in_deopt_handler(); |
| |
| return fetch_unroll_info_helper(thread, exec_mode); |
| JRT_END |
| |
| |
| // This is factored, since it is both called from a JRT_LEAF (deoptimization) and a JRT_ENTRY (uncommon_trap) |
| Deoptimization::UnrollBlock* Deoptimization::fetch_unroll_info_helper(JavaThread* thread, int exec_mode) { |
| |
| // Note: there is a safepoint safety issue here. No matter whether we enter |
| // via vanilla deopt or uncommon trap we MUST NOT stop at a safepoint once |
| // the vframeArray is created. |
| // |
| |
| // Allocate our special deoptimization ResourceMark |
| DeoptResourceMark* dmark = new DeoptResourceMark(thread); |
| assert(thread->deopt_mark() == NULL, "Pending deopt!"); |
| thread->set_deopt_mark(dmark); |
| |
| frame stub_frame = thread->last_frame(); // Makes stack walkable as side effect |
| RegisterMap map(thread, true); |
| RegisterMap dummy_map(thread, false); |
| // Now get the deoptee with a valid map |
| frame deoptee = stub_frame.sender(&map); |
| // Set the deoptee nmethod |
| assert(thread->deopt_compiled_method() == NULL, "Pending deopt!"); |
| CompiledMethod* cm = deoptee.cb()->as_compiled_method_or_null(); |
| thread->set_deopt_compiled_method(cm); |
| |
| if (VerifyStack) { |
| thread->validate_frame_layout(); |
| } |
| |
| // Create a growable array of VFrames where each VFrame represents an inlined |
| // Java frame. This storage is allocated with the usual system arena. |
| assert(deoptee.is_compiled_frame(), "Wrong frame type"); |
| GrowableArray<compiledVFrame*>* chunk = new GrowableArray<compiledVFrame*>(10); |
| vframe* vf = vframe::new_vframe(&deoptee, &map, thread); |
| while (!vf->is_top()) { |
| assert(vf->is_compiled_frame(), "Wrong frame type"); |
| chunk->push(compiledVFrame::cast(vf)); |
| vf = vf->sender(); |
| } |
| assert(vf->is_compiled_frame(), "Wrong frame type"); |
| chunk->push(compiledVFrame::cast(vf)); |
| |
| bool realloc_failures = false; |
| |
| #if COMPILER2_OR_JVMCI |
| // Reallocate the non-escaping objects and restore their fields. Then |
| // relock objects if synchronization on them was eliminated. |
| #if !INCLUDE_JVMCI |
| if (DoEscapeAnalysis || EliminateNestedLocks) { |
| if (EliminateAllocations) { |
| #endif // INCLUDE_JVMCI |
| assert (chunk->at(0)->scope() != NULL,"expect only compiled java frames"); |
| GrowableArray<ScopeValue*>* objects = chunk->at(0)->scope()->objects(); |
| |
| // The flag return_oop() indicates call sites which return oop |
| // in compiled code. Such sites include java method calls, |
| // runtime calls (for example, used to allocate new objects/arrays |
| // on slow code path) and any other calls generated in compiled code. |
| // It is not guaranteed that we can get such information here only |
| // by analyzing bytecode in deoptimized frames. This is why this flag |
| // is set during method compilation (see Compile::Process_OopMap_Node()). |
| // If the previous frame was popped or if we are dispatching an exception, |
| // we don't have an oop result. |
| bool save_oop_result = chunk->at(0)->scope()->return_oop() && !thread->popframe_forcing_deopt_reexecution() && (exec_mode == Unpack_deopt); |
| Handle return_value; |
| if (save_oop_result) { |
| // Reallocation may trigger GC. If deoptimization happened on return from |
| // call which returns oop we need to save it since it is not in oopmap. |
| oop result = deoptee.saved_oop_result(&map); |
| assert(oopDesc::is_oop_or_null(result), "must be oop"); |
| return_value = Handle(thread, result); |
| assert(Universe::heap()->is_in_or_null(result), "must be heap pointer"); |
| if (TraceDeoptimization) { |
| ttyLocker ttyl; |
| tty->print_cr("SAVED OOP RESULT " INTPTR_FORMAT " in thread " INTPTR_FORMAT, p2i(result), p2i(thread)); |
| } |
| } |
| if (objects != NULL) { |
| JRT_BLOCK |
| realloc_failures = realloc_objects(thread, &deoptee, objects, THREAD); |
| JRT_END |
| bool skip_internal = (cm != NULL) && !cm->is_compiled_by_jvmci(); |
| reassign_fields(&deoptee, &map, objects, realloc_failures, skip_internal); |
| #ifndef PRODUCT |
| if (TraceDeoptimization) { |
| ttyLocker ttyl; |
| tty->print_cr("REALLOC OBJECTS in thread " INTPTR_FORMAT, p2i(thread)); |
| print_objects(objects, realloc_failures); |
| } |
| #endif |
| } |
| if (save_oop_result) { |
| // Restore result. |
| deoptee.set_saved_oop_result(&map, return_value()); |
| } |
| #if !INCLUDE_JVMCI |
| } |
| if (EliminateLocks) { |
| #endif // INCLUDE_JVMCI |
| HandleMark hm; |
| #ifndef PRODUCT |
| bool first = true; |
| #endif |
| for (int i = 0; i < chunk->length(); i++) { |
| compiledVFrame* cvf = chunk->at(i); |
| assert (cvf->scope() != NULL,"expect only compiled java frames"); |
| GrowableArray<MonitorInfo*>* monitors = cvf->monitors(); |
| if (monitors->is_nonempty()) { |
| relock_objects(monitors, thread, realloc_failures); |
| #ifndef PRODUCT |
| if (PrintDeoptimizationDetails) { |
| ttyLocker ttyl; |
| for (int j = 0; j < monitors->length(); j++) { |
| MonitorInfo* mi = monitors->at(j); |
| if (mi->eliminated()) { |
| if (first) { |
| first = false; |
| tty->print_cr("RELOCK OBJECTS in thread " INTPTR_FORMAT, p2i(thread)); |
| } |
| if (mi->owner_is_scalar_replaced()) { |
| Klass* k = java_lang_Class::as_Klass(mi->owner_klass()); |
| tty->print_cr(" failed reallocation for klass %s", k->external_name()); |
| } else { |
| tty->print_cr(" object <" INTPTR_FORMAT "> locked", p2i(mi->owner())); |
| } |
| } |
| } |
| } |
| #endif // !PRODUCT |
| } |
| } |
| #if !INCLUDE_JVMCI |
| } |
| } |
| #endif // INCLUDE_JVMCI |
| #endif // COMPILER2_OR_JVMCI |
| |
| ScopeDesc* trap_scope = chunk->at(0)->scope(); |
| Handle exceptionObject; |
| if (trap_scope->rethrow_exception()) { |
| if (PrintDeoptimizationDetails) { |
| tty->print_cr("Exception to be rethrown in the interpreter for method %s::%s at bci %d", trap_scope->method()->method_holder()->name()->as_C_string(), trap_scope->method()->name()->as_C_string(), trap_scope->bci()); |
| } |
| GrowableArray<ScopeValue*>* expressions = trap_scope->expressions(); |
| guarantee(expressions != NULL && expressions->length() > 0, "must have exception to throw"); |
| ScopeValue* topOfStack = expressions->top(); |
| exceptionObject = StackValue::create_stack_value(&deoptee, &map, topOfStack)->get_obj(); |
| guarantee(exceptionObject() != NULL, "exception oop can not be null"); |
| } |
| |
| // Ensure that no safepoint is taken after pointers have been stored |
| // in fields of rematerialized objects. If a safepoint occurs from here on |
| // out the java state residing in the vframeArray will be missed. |
| NoSafepointVerifier no_safepoint; |
| |
| vframeArray* array = create_vframeArray(thread, deoptee, &map, chunk, realloc_failures); |
| #if COMPILER2_OR_JVMCI |
| if (realloc_failures) { |
| pop_frames_failed_reallocs(thread, array); |
| } |
| #endif |
| |
| assert(thread->vframe_array_head() == NULL, "Pending deopt!"); |
| thread->set_vframe_array_head(array); |
| |
| // Now that the vframeArray has been created if we have any deferred local writes |
| // added by jvmti then we can free up that structure as the data is now in the |
| // vframeArray |
| |
| if (thread->deferred_locals() != NULL) { |
| GrowableArray<jvmtiDeferredLocalVariableSet*>* list = thread->deferred_locals(); |
| int i = 0; |
| do { |
| // Because of inlining we could have multiple vframes for a single frame |
| // and several of the vframes could have deferred writes. Find them all. |
| if (list->at(i)->id() == array->original().id()) { |
| jvmtiDeferredLocalVariableSet* dlv = list->at(i); |
| list->remove_at(i); |
| // individual jvmtiDeferredLocalVariableSet are CHeapObj's |
| delete dlv; |
| } else { |
| i++; |
| } |
| } while ( i < list->length() ); |
| if (list->length() == 0) { |
| thread->set_deferred_locals(NULL); |
| // free the list and elements back to C heap. |
| delete list; |
| } |
| |
| } |
| |
| // Compute the caller frame based on the sender sp of stub_frame and stored frame sizes info. |
| CodeBlob* cb = stub_frame.cb(); |
| // Verify we have the right vframeArray |
| assert(cb->frame_size() >= 0, "Unexpected frame size"); |
| intptr_t* unpack_sp = stub_frame.sp() + cb->frame_size(); |
| |
| // If the deopt call site is a MethodHandle invoke call site we have |
| // to adjust the unpack_sp. |
| nmethod* deoptee_nm = deoptee.cb()->as_nmethod_or_null(); |
| if (deoptee_nm != NULL && deoptee_nm->is_method_handle_return(deoptee.pc())) |
| unpack_sp = deoptee.unextended_sp(); |
| |
| #ifdef ASSERT |
| assert(cb->is_deoptimization_stub() || |
| cb->is_uncommon_trap_stub() || |
| strcmp("Stub<DeoptimizationStub.deoptimizationHandler>", cb->name()) == 0 || |
| strcmp("Stub<UncommonTrapStub.uncommonTrapHandler>", cb->name()) == 0, |
| "unexpected code blob: %s", cb->name()); |
| #endif |
| |
| // This is a guarantee instead of an assert because if vframe doesn't match |
| // we will unpack the wrong deoptimized frame and wind up in strange places |
| // where it will be very difficult to figure out what went wrong. Better |
| // to die an early death here than some very obscure death later when the |
| // trail is cold. |
| // Note: on ia64 this guarantee can be fooled by frames with no memory stack |
| // in that it will fail to detect a problem when there is one. This needs |
| // more work in tiger timeframe. |
| guarantee(array->unextended_sp() == unpack_sp, "vframe_array_head must contain the vframeArray to unpack"); |
| |
| int number_of_frames = array->frames(); |
| |
| // Compute the vframes' sizes. Note that frame_sizes[] entries are ordered from outermost to innermost |
| // virtual activation, which is the reverse of the elements in the vframes array. |
| intptr_t* frame_sizes = NEW_C_HEAP_ARRAY(intptr_t, number_of_frames, mtCompiler); |
| // +1 because we always have an interpreter return address for the final slot. |
| address* frame_pcs = NEW_C_HEAP_ARRAY(address, number_of_frames + 1, mtCompiler); |
| int popframe_extra_args = 0; |
| // Create an interpreter return address for the stub to use as its return |
| // address so the skeletal frames are perfectly walkable |
| frame_pcs[number_of_frames] = Interpreter::deopt_entry(vtos, 0); |
| |
| // PopFrame requires that the preserved incoming arguments from the recently-popped topmost |
| // activation be put back on the expression stack of the caller for reexecution |
| if (JvmtiExport::can_pop_frame() && thread->popframe_forcing_deopt_reexecution()) { |
| popframe_extra_args = in_words(thread->popframe_preserved_args_size_in_words()); |
| } |
| |
| // Find the current pc for sender of the deoptee. Since the sender may have been deoptimized |
| // itself since the deoptee vframeArray was created we must get a fresh value of the pc rather |
| // than simply use array->sender.pc(). This requires us to walk the current set of frames |
| // |
| frame deopt_sender = stub_frame.sender(&dummy_map); // First is the deoptee frame |
| deopt_sender = deopt_sender.sender(&dummy_map); // Now deoptee caller |
| |
| // It's possible that the number of parameters at the call site is |
| // different than number of arguments in the callee when method |
| // handles are used. If the caller is interpreted get the real |
| // value so that the proper amount of space can be added to it's |
| // frame. |
| bool caller_was_method_handle = false; |
| if (deopt_sender.is_interpreted_frame()) { |
| methodHandle method = deopt_sender.interpreter_frame_method(); |
| Bytecode_invoke cur = Bytecode_invoke_check(method, deopt_sender.interpreter_frame_bci()); |
| if (cur.is_invokedynamic() || cur.is_invokehandle()) { |
| // Method handle invokes may involve fairly arbitrary chains of |
| // calls so it's impossible to know how much actual space the |
| // caller has for locals. |
| caller_was_method_handle = true; |
| } |
| } |
| |
| // |
| // frame_sizes/frame_pcs[0] oldest frame (int or c2i) |
| // frame_sizes/frame_pcs[1] next oldest frame (int) |
| // frame_sizes/frame_pcs[n] youngest frame (int) |
| // |
| // Now a pc in frame_pcs is actually the return address to the frame's caller (a frame |
| // owns the space for the return address to it's caller). Confusing ain't it. |
| // |
| // The vframe array can address vframes with indices running from |
| // 0.._frames-1. Index 0 is the youngest frame and _frame - 1 is the oldest (root) frame. |
| // When we create the skeletal frames we need the oldest frame to be in the zero slot |
| // in the frame_sizes/frame_pcs so the assembly code can do a trivial walk. |
| // so things look a little strange in this loop. |
| // |
| int callee_parameters = 0; |
| int callee_locals = 0; |
| for (int index = 0; index < array->frames(); index++ ) { |
| // frame[number_of_frames - 1 ] = on_stack_size(youngest) |
| // frame[number_of_frames - 2 ] = on_stack_size(sender(youngest)) |
| // frame[number_of_frames - 3 ] = on_stack_size(sender(sender(youngest))) |
| frame_sizes[number_of_frames - 1 - index] = BytesPerWord * array->element(index)->on_stack_size(callee_parameters, |
| callee_locals, |
| index == 0, |
| popframe_extra_args); |
| // This pc doesn't have to be perfect just good enough to identify the frame |
| // as interpreted so the skeleton frame will be walkable |
| // The correct pc will be set when the skeleton frame is completely filled out |
| // The final pc we store in the loop is wrong and will be overwritten below |
| frame_pcs[number_of_frames - 1 - index ] = Interpreter::deopt_entry(vtos, 0) - frame::pc_return_offset; |
| |
| callee_parameters = array->element(index)->method()->size_of_parameters(); |
| callee_locals = array->element(index)->method()->max_locals(); |
| popframe_extra_args = 0; |
| } |
| |
| // Compute whether the root vframe returns a float or double value. |
| BasicType return_type; |
| { |
| methodHandle method(thread, array->element(0)->method()); |
| Bytecode_invoke invoke = Bytecode_invoke_check(method, array->element(0)->bci()); |
| return_type = invoke.is_valid() ? invoke.result_type() : T_ILLEGAL; |
| } |
| |
| // Compute information for handling adapters and adjusting the frame size of the caller. |
| int caller_adjustment = 0; |
| |
| // Compute the amount the oldest interpreter frame will have to adjust |
| // its caller's stack by. If the caller is a compiled frame then |
| // we pretend that the callee has no parameters so that the |
| // extension counts for the full amount of locals and not just |
| // locals-parms. This is because without a c2i adapter the parm |
| // area as created by the compiled frame will not be usable by |
| // the interpreter. (Depending on the calling convention there |
| // may not even be enough space). |
| |
| // QQQ I'd rather see this pushed down into last_frame_adjust |
| // and have it take the sender (aka caller). |
| |
| if (deopt_sender.is_compiled_frame() || caller_was_method_handle) { |
| caller_adjustment = last_frame_adjust(0, callee_locals); |
| } else if (callee_locals > callee_parameters) { |
| // The caller frame may need extending to accommodate |
| // non-parameter locals of the first unpacked interpreted frame. |
| // Compute that adjustment. |
| caller_adjustment = last_frame_adjust(callee_parameters, callee_locals); |
| } |
| |
| // If the sender is deoptimized the we must retrieve the address of the handler |
| // since the frame will "magically" show the original pc before the deopt |
| // and we'd undo the deopt. |
| |
| frame_pcs[0] = deopt_sender.raw_pc(); |
| |
| assert(CodeCache::find_blob_unsafe(frame_pcs[0]) != NULL, "bad pc"); |
| |
| #if INCLUDE_JVMCI |
| if (exceptionObject() != NULL) { |
| thread->set_exception_oop(exceptionObject()); |
| exec_mode = Unpack_exception; |
| } |
| #endif |
| |
| if (thread->frames_to_pop_failed_realloc() > 0 && exec_mode != Unpack_uncommon_trap) { |
| assert(thread->has_pending_exception(), "should have thrown OOME"); |
| thread->set_exception_oop(thread->pending_exception()); |
| thread->clear_pending_exception(); |
| exec_mode = Unpack_exception; |
| } |
| |
| #if INCLUDE_JVMCI |
| if (thread->frames_to_pop_failed_realloc() > 0) { |
| thread->set_pending_monitorenter(false); |
| } |
| #endif |
| |
| UnrollBlock* info = new UnrollBlock(array->frame_size() * BytesPerWord, |
| caller_adjustment * BytesPerWord, |
| caller_was_method_handle ? 0 : callee_parameters, |
| number_of_frames, |
| frame_sizes, |
| frame_pcs, |
| return_type, |
| exec_mode); |
| // On some platforms, we need a way to pass some platform dependent |
| // information to the unpacking code so the skeletal frames come out |
| // correct (initial fp value, unextended sp, ...) |
| info->set_initial_info((intptr_t) array->sender().initial_deoptimization_info()); |
| |
| if (array->frames() > 1) { |
| if (VerifyStack && TraceDeoptimization) { |
| ttyLocker ttyl; |
| tty->print_cr("Deoptimizing method containing inlining"); |
| } |
| } |
| |
| array->set_unroll_block(info); |
| return info; |
| } |
| |
| // Called to cleanup deoptimization data structures in normal case |
| // after unpacking to stack and when stack overflow error occurs |
| void Deoptimization::cleanup_deopt_info(JavaThread *thread, |
| vframeArray *array) { |
| |
| // Get array if coming from exception |
| if (array == NULL) { |
| array = thread->vframe_array_head(); |
| } |
| thread->set_vframe_array_head(NULL); |
| |
| // Free the previous UnrollBlock |
| vframeArray* old_array = thread->vframe_array_last(); |
| thread->set_vframe_array_last(array); |
| |
| if (old_array != NULL) { |
| UnrollBlock* old_info = old_array->unroll_block(); |
| old_array->set_unroll_block(NULL); |
| delete old_info; |
| delete old_array; |
| } |
| |
| // Deallocate any resource creating in this routine and any ResourceObjs allocated |
| // inside the vframeArray (StackValueCollections) |
| |
| delete thread->deopt_mark(); |
| thread->set_deopt_mark(NULL); |
| thread->set_deopt_compiled_method(NULL); |
| |
| |
| if (JvmtiExport::can_pop_frame()) { |
| #ifndef CC_INTERP |
| // Regardless of whether we entered this routine with the pending |
| // popframe condition bit set, we should always clear it now |
| thread->clear_popframe_condition(); |
| #else |
| // C++ interpreter will clear has_pending_popframe when it enters |
| // with method_resume. For deopt_resume2 we clear it now. |
| if (thread->popframe_forcing_deopt_reexecution()) |
| thread->clear_popframe_condition(); |
| #endif /* CC_INTERP */ |
| } |
| |
| // unpack_frames() is called at the end of the deoptimization handler |
| // and (in C2) at the end of the uncommon trap handler. Note this fact |
| // so that an asynchronous stack walker can work again. This counter is |
| // incremented at the beginning of fetch_unroll_info() and (in C2) at |
| // the beginning of uncommon_trap(). |
| thread->dec_in_deopt_handler(); |
| } |
| |
| // Moved from cpu directories because none of the cpus has callee save values. |
| // If a cpu implements callee save values, move this to deoptimization_<cpu>.cpp. |
| void Deoptimization::unwind_callee_save_values(frame* f, vframeArray* vframe_array) { |
| |
| // This code is sort of the equivalent of C2IAdapter::setup_stack_frame back in |
| // the days we had adapter frames. When we deoptimize a situation where a |
| // compiled caller calls a compiled caller will have registers it expects |
| // to survive the call to the callee. If we deoptimize the callee the only |
| // way we can restore these registers is to have the oldest interpreter |
| // frame that we create restore these values. That is what this routine |
| // will accomplish. |
| |
| // At the moment we have modified c2 to not have any callee save registers |
| // so this problem does not exist and this routine is just a place holder. |
| |
| assert(f->is_interpreted_frame(), "must be interpreted"); |
| } |
| |
| // Return BasicType of value being returned |
| JRT_LEAF(BasicType, Deoptimization::unpack_frames(JavaThread* thread, int exec_mode)) |
| |
| // We are already active in the special DeoptResourceMark any ResourceObj's we |
| // allocate will be freed at the end of the routine. |
| |
| // It is actually ok to allocate handles in a leaf method. It causes no safepoints, |
| // but makes the entry a little slower. There is however a little dance we have to |
| // do in debug mode to get around the NoHandleMark code in the JRT_LEAF macro |
| ResetNoHandleMark rnhm; // No-op in release/product versions |
| HandleMark hm; |
| |
| frame stub_frame = thread->last_frame(); |
| |
| // Since the frame to unpack is the top frame of this thread, the vframe_array_head |
| // must point to the vframeArray for the unpack frame. |
| vframeArray* array = thread->vframe_array_head(); |
| |
| #ifndef PRODUCT |
| if (TraceDeoptimization) { |
| ttyLocker ttyl; |
| tty->print_cr("DEOPT UNPACKING thread " INTPTR_FORMAT " vframeArray " INTPTR_FORMAT " mode %d", |
| p2i(thread), p2i(array), exec_mode); |
| } |
| #endif |
| Events::log_deopt_message(thread, "DEOPT UNPACKING pc=" INTPTR_FORMAT " sp=" INTPTR_FORMAT " mode %d", |
| p2i(stub_frame.pc()), p2i(stub_frame.sp()), exec_mode); |
| |
| UnrollBlock* info = array->unroll_block(); |
| |
| // Unpack the interpreter frames and any adapter frame (c2 only) we might create. |
| array->unpack_to_stack(stub_frame, exec_mode, info->caller_actual_parameters()); |
| |
| BasicType bt = info->return_type(); |
| |
| // If we have an exception pending, claim that the return type is an oop |
| // so the deopt_blob does not overwrite the exception_oop. |
| |
| if (exec_mode == Unpack_exception) |
| bt = T_OBJECT; |
| |
| // Cleanup thread deopt data |
| cleanup_deopt_info(thread, array); |
| |
| #ifndef PRODUCT |
| if (VerifyStack) { |
| ResourceMark res_mark; |
| // Clear pending exception to not break verification code (restored afterwards) |
| PRESERVE_EXCEPTION_MARK; |
| |
| thread->validate_frame_layout(); |
| |
| // Verify that the just-unpacked frames match the interpreter's |
| // notions of expression stack and locals |
| vframeArray* cur_array = thread->vframe_array_last(); |
| RegisterMap rm(thread, false); |
| rm.set_include_argument_oops(false); |
| bool is_top_frame = true; |
| int callee_size_of_parameters = 0; |
| int callee_max_locals = 0; |
| for (int i = 0; i < cur_array->frames(); i++) { |
| vframeArrayElement* el = cur_array->element(i); |
| frame* iframe = el->iframe(); |
| guarantee(iframe->is_interpreted_frame(), "Wrong frame type"); |
| |
| // Get the oop map for this bci |
| InterpreterOopMap mask; |
| int cur_invoke_parameter_size = 0; |
| bool try_next_mask = false; |
| int next_mask_expression_stack_size = -1; |
| int top_frame_expression_stack_adjustment = 0; |
| methodHandle mh(thread, iframe->interpreter_frame_method()); |
| OopMapCache::compute_one_oop_map(mh, iframe->interpreter_frame_bci(), &mask); |
| BytecodeStream str(mh); |
| str.set_start(iframe->interpreter_frame_bci()); |
| int max_bci = mh->code_size(); |
| // Get to the next bytecode if possible |
| assert(str.bci() < max_bci, "bci in interpreter frame out of bounds"); |
| // Check to see if we can grab the number of outgoing arguments |
| // at an uncommon trap for an invoke (where the compiler |
| // generates debug info before the invoke has executed) |
| Bytecodes::Code cur_code = str.next(); |
| Bytecodes::Code next_code = Bytecodes::_shouldnotreachhere; |
| if (Bytecodes::is_invoke(cur_code)) { |
| Bytecode_invoke invoke(mh, iframe->interpreter_frame_bci()); |
| cur_invoke_parameter_size = invoke.size_of_parameters(); |
| if (i != 0 && !invoke.is_invokedynamic() && MethodHandles::has_member_arg(invoke.klass(), invoke.name())) { |
| callee_size_of_parameters++; |
| } |
| } |
| if (str.bci() < max_bci) { |
| next_code = str.next(); |
| if (next_code >= 0) { |
| // The interpreter oop map generator reports results before |
| // the current bytecode has executed except in the case of |
| // calls. It seems to be hard to tell whether the compiler |
| // has emitted debug information matching the "state before" |
| // a given bytecode or the state after, so we try both |
| if (!Bytecodes::is_invoke(cur_code) && cur_code != Bytecodes::_athrow) { |
| // Get expression stack size for the next bytecode |
| if (Bytecodes::is_invoke(next_code)) { |
| Bytecode_invoke invoke(mh, str.bci()); |
| next_mask_expression_stack_size = invoke.size_of_parameters(); |
| } else { |
| InterpreterOopMap next_mask; |
| OopMapCache::compute_one_oop_map(mh, str.bci(), &next_mask); |
| next_mask_expression_stack_size = next_mask.expression_stack_size(); |
| } |
| // Need to subtract off the size of the result type of |
| // the bytecode because this is not described in the |
| // debug info but returned to the interpreter in the TOS |
| // caching register |
| BasicType bytecode_result_type = Bytecodes::result_type(cur_code); |
| if (bytecode_result_type != T_ILLEGAL) { |
| top_frame_expression_stack_adjustment = type2size[bytecode_result_type]; |
| } |
| assert(top_frame_expression_stack_adjustment >= 0, "stack adjustment must be positive"); |
| try_next_mask = true; |
| } |
| } |
| } |
| |
| // Verify stack depth and oops in frame |
| // This assertion may be dependent on the platform we're running on and may need modification (tested on x86 and sparc) |
| if (!( |
| /* SPARC */ |
| (iframe->interpreter_frame_expression_stack_size() == mask.expression_stack_size() + callee_size_of_parameters) || |
| /* x86 */ |
| (iframe->interpreter_frame_expression_stack_size() == mask.expression_stack_size() + callee_max_locals) || |
| (try_next_mask && |
| (iframe->interpreter_frame_expression_stack_size() == (next_mask_expression_stack_size - |
| top_frame_expression_stack_adjustment))) || |
| (is_top_frame && (exec_mode == Unpack_exception) && iframe->interpreter_frame_expression_stack_size() == 0) || |
| (is_top_frame && (exec_mode == Unpack_uncommon_trap || exec_mode == Unpack_reexecute || el->should_reexecute()) && |
| (iframe->interpreter_frame_expression_stack_size() == mask.expression_stack_size() + cur_invoke_parameter_size)) |
| )) { |
| ttyLocker ttyl; |
| |
| // Print out some information that will help us debug the problem |
| tty->print_cr("Wrong number of expression stack elements during deoptimization"); |
| tty->print_cr(" Error occurred while verifying frame %d (0..%d, 0 is topmost)", i, cur_array->frames() - 1); |
| tty->print_cr(" Current code %s", Bytecodes::name(cur_code)); |
| if (try_next_mask) { |
| tty->print_cr(" Next code %s", Bytecodes::name(next_code)); |
| } |
| tty->print_cr(" Fabricated interpreter frame had %d expression stack elements", |
| iframe->interpreter_frame_expression_stack_size()); |
| tty->print_cr(" Interpreter oop map had %d expression stack elements", mask.expression_stack_size()); |
| tty->print_cr(" try_next_mask = %d", try_next_mask); |
| tty->print_cr(" next_mask_expression_stack_size = %d", next_mask_expression_stack_size); |
| tty->print_cr(" callee_size_of_parameters = %d", callee_size_of_parameters); |
| tty->print_cr(" callee_max_locals = %d", callee_max_locals); |
| tty->print_cr(" top_frame_expression_stack_adjustment = %d", top_frame_expression_stack_adjustment); |
| tty->print_cr(" exec_mode = %d", exec_mode); |
| tty->print_cr(" cur_invoke_parameter_size = %d", cur_invoke_parameter_size); |
| tty->print_cr(" Thread = " INTPTR_FORMAT ", thread ID = %d", p2i(thread), thread->osthread()->thread_id()); |
| tty->print_cr(" Interpreted frames:"); |
| for (int k = 0; k < cur_array->frames(); k++) { |
| vframeArrayElement* el = cur_array->element(k); |
| tty->print_cr(" %s (bci %d)", el->method()->name_and_sig_as_C_string(), el->bci()); |
| } |
| cur_array->print_on_2(tty); |
| guarantee(false, "wrong number of expression stack elements during deopt"); |
| } |
| VerifyOopClosure verify; |
| iframe->oops_interpreted_do(&verify, &rm, false); |
| callee_size_of_parameters = mh->size_of_parameters(); |
| callee_max_locals = mh->max_locals(); |
| is_top_frame = false; |
| } |
| } |
| #endif /* !PRODUCT */ |
| |
| |
| return bt; |
| JRT_END |
| |
| |
| int Deoptimization::deoptimize_dependents() { |
| Threads::deoptimized_wrt_marked_nmethods(); |
| return 0; |
| } |
| |
| Deoptimization::DeoptAction Deoptimization::_unloaded_action |
| = Deoptimization::Action_reinterpret; |
| |
| #if COMPILER2_OR_JVMCI |
| bool Deoptimization::realloc_objects(JavaThread* thread, frame* fr, GrowableArray<ScopeValue*>* objects, TRAPS) { |
| Handle pending_exception(THREAD, thread->pending_exception()); |
| const char* exception_file = thread->exception_file(); |
| int exception_line = thread->exception_line(); |
| thread->clear_pending_exception(); |
| |
| bool failures = false; |
| |
| for (int i = 0; i < objects->length(); i++) { |
| assert(objects->at(i)->is_object(), "invalid debug information"); |
| ObjectValue* sv = (ObjectValue*) objects->at(i); |
| |
| Klass* k = java_lang_Class::as_Klass(sv->klass()->as_ConstantOopReadValue()->value()()); |
| oop obj = NULL; |
| |
| if (k->is_instance_klass()) { |
| InstanceKlass* ik = InstanceKlass::cast(k); |
| obj = ik->allocate_instance(THREAD); |
| } else if (k->is_typeArray_klass()) { |
| TypeArrayKlass* ak = TypeArrayKlass::cast(k); |
| assert(sv->field_size() % type2size[ak->element_type()] == 0, "non-integral array length"); |
| int len = sv->field_size() / type2size[ak->element_type()]; |
| obj = ak->allocate(len, THREAD); |
| } else if (k->is_objArray_klass()) { |
| ObjArrayKlass* ak = ObjArrayKlass::cast(k); |
| obj = ak->allocate(sv->field_size(), THREAD); |
| } |
| |
| if (obj == NULL) { |
| failures = true; |
| } |
| |
| assert(sv->value().is_null(), "redundant reallocation"); |
| assert(obj != NULL || HAS_PENDING_EXCEPTION, "allocation should succeed or we should get an exception"); |
| CLEAR_PENDING_EXCEPTION; |
| sv->set_value(obj); |
| } |
| |
| if (failures) { |
| THROW_OOP_(Universe::out_of_memory_error_realloc_objects(), failures); |
| } else if (pending_exception.not_null()) { |
| thread->set_pending_exception(pending_exception(), exception_file, exception_line); |
| } |
| |
| return failures; |
| } |
| |
| // restore elements of an eliminated type array |
| void Deoptimization::reassign_type_array_elements(frame* fr, RegisterMap* reg_map, ObjectValue* sv, typeArrayOop obj, BasicType type) { |
| int index = 0; |
| intptr_t val; |
| |
| for (int i = 0; i < sv->field_size(); i++) { |
| StackValue* value = StackValue::create_stack_value(fr, reg_map, sv->field_at(i)); |
| switch(type) { |
| case T_LONG: case T_DOUBLE: { |
| assert(value->type() == T_INT, "Agreement."); |
| StackValue* low = |
| StackValue::create_stack_value(fr, reg_map, sv->field_at(++i)); |
| #ifdef _LP64 |
| jlong res = (jlong)low->get_int(); |
| #else |
| #ifdef SPARC |
| // For SPARC we have to swap high and low words. |
| jlong res = jlong_from((jint)low->get_int(), (jint)value->get_int()); |
| #else |
| jlong res = jlong_from((jint)value->get_int(), (jint)low->get_int()); |
| #endif //SPARC |
| #endif |
| obj->long_at_put(index, res); |
| break; |
| } |
| |
| // Have to cast to INT (32 bits) pointer to avoid little/big-endian problem. |
| case T_INT: case T_FLOAT: { // 4 bytes. |
| assert(value->type() == T_INT, "Agreement."); |
| bool big_value = false; |
| if (i + 1 < sv->field_size() && type == T_INT) { |
| if (sv->field_at(i)->is_location()) { |
| Location::Type type = ((LocationValue*) sv->field_at(i))->location().type(); |
| if (type == Location::dbl || type == Location::lng) { |
| big_value = true; |
| } |
| } else if (sv->field_at(i)->is_constant_int()) { |
| ScopeValue* next_scope_field = sv->field_at(i + 1); |
| if (next_scope_field->is_constant_long() || next_scope_field->is_constant_double()) { |
| big_value = true; |
| } |
| } |
| } |
| |
| if (big_value) { |
| StackValue* low = StackValue::create_stack_value(fr, reg_map, sv->field_at(++i)); |
| #ifdef _LP64 |
| jlong res = (jlong)low->get_int(); |
| #else |
| #ifdef SPARC |
| // For SPARC we have to swap high and low words. |
| jlong res = jlong_from((jint)low->get_int(), (jint)value->get_int()); |
| #else |
| jlong res = jlong_from((jint)value->get_int(), (jint)low->get_int()); |
| #endif //SPARC |
| #endif |
| obj->int_at_put(index, (jint)*((jint*)&res)); |
| obj->int_at_put(++index, (jint)*(((jint*)&res) + 1)); |
| } else { |
| val = value->get_int(); |
| obj->int_at_put(index, (jint)*((jint*)&val)); |
| } |
| break; |
| } |
| |
| case T_SHORT: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->short_at_put(index, (jshort)*((jint*)&val)); |
| break; |
| |
| case T_CHAR: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->char_at_put(index, (jchar)*((jint*)&val)); |
| break; |
| |
| case T_BYTE: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->byte_at_put(index, (jbyte)*((jint*)&val)); |
| break; |
| |
| case T_BOOLEAN: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->bool_at_put(index, (jboolean)*((jint*)&val)); |
| break; |
| |
| default: |
| ShouldNotReachHere(); |
| } |
| index++; |
| } |
| } |
| |
| |
| // restore fields of an eliminated object array |
| void Deoptimization::reassign_object_array_elements(frame* fr, RegisterMap* reg_map, ObjectValue* sv, objArrayOop obj) { |
| for (int i = 0; i < sv->field_size(); i++) { |
| StackValue* value = StackValue::create_stack_value(fr, reg_map, sv->field_at(i)); |
| assert(value->type() == T_OBJECT, "object element expected"); |
| obj->obj_at_put(i, value->get_obj()()); |
| } |
| } |
| |
| class ReassignedField { |
| public: |
| int _offset; |
| BasicType _type; |
| public: |
| ReassignedField() { |
| _offset = 0; |
| _type = T_ILLEGAL; |
| } |
| }; |
| |
| int compare(ReassignedField* left, ReassignedField* right) { |
| return left->_offset - right->_offset; |
| } |
| |
| // Restore fields of an eliminated instance object using the same field order |
| // returned by HotSpotResolvedObjectTypeImpl.getInstanceFields(true) |
| static int reassign_fields_by_klass(InstanceKlass* klass, frame* fr, RegisterMap* reg_map, ObjectValue* sv, int svIndex, oop obj, bool skip_internal) { |
| if (klass->superklass() != NULL) { |
| svIndex = reassign_fields_by_klass(klass->superklass(), fr, reg_map, sv, svIndex, obj, skip_internal); |
| } |
| |
| GrowableArray<ReassignedField>* fields = new GrowableArray<ReassignedField>(); |
| for (AllFieldStream fs(klass); !fs.done(); fs.next()) { |
| if (!fs.access_flags().is_static() && (!skip_internal || !fs.access_flags().is_internal())) { |
| ReassignedField field; |
| field._offset = fs.offset(); |
| field._type = FieldType::basic_type(fs.signature()); |
| fields->append(field); |
| } |
| } |
| fields->sort(compare); |
| for (int i = 0; i < fields->length(); i++) { |
| intptr_t val; |
| ScopeValue* scope_field = sv->field_at(svIndex); |
| StackValue* value = StackValue::create_stack_value(fr, reg_map, scope_field); |
| int offset = fields->at(i)._offset; |
| BasicType type = fields->at(i)._type; |
| switch (type) { |
| case T_OBJECT: case T_ARRAY: |
| assert(value->type() == T_OBJECT, "Agreement."); |
| obj->obj_field_put(offset, value->get_obj()()); |
| break; |
| |
| // Have to cast to INT (32 bits) pointer to avoid little/big-endian problem. |
| case T_INT: case T_FLOAT: { // 4 bytes. |
| assert(value->type() == T_INT, "Agreement."); |
| bool big_value = false; |
| if (i+1 < fields->length() && fields->at(i+1)._type == T_INT) { |
| if (scope_field->is_location()) { |
| Location::Type type = ((LocationValue*) scope_field)->location().type(); |
| if (type == Location::dbl || type == Location::lng) { |
| big_value = true; |
| } |
| } |
| if (scope_field->is_constant_int()) { |
| ScopeValue* next_scope_field = sv->field_at(svIndex + 1); |
| if (next_scope_field->is_constant_long() || next_scope_field->is_constant_double()) { |
| big_value = true; |
| } |
| } |
| } |
| |
| if (big_value) { |
| i++; |
| assert(i < fields->length(), "second T_INT field needed"); |
| assert(fields->at(i)._type == T_INT, "T_INT field needed"); |
| } else { |
| val = value->get_int(); |
| obj->int_field_put(offset, (jint)*((jint*)&val)); |
| break; |
| } |
| } |
| /* no break */ |
| |
| case T_LONG: case T_DOUBLE: { |
| assert(value->type() == T_INT, "Agreement."); |
| StackValue* low = StackValue::create_stack_value(fr, reg_map, sv->field_at(++svIndex)); |
| #ifdef _LP64 |
| jlong res = (jlong)low->get_int(); |
| #else |
| #ifdef SPARC |
| // For SPARC we have to swap high and low words. |
| jlong res = jlong_from((jint)low->get_int(), (jint)value->get_int()); |
| #else |
| jlong res = jlong_from((jint)value->get_int(), (jint)low->get_int()); |
| #endif //SPARC |
| #endif |
| obj->long_field_put(offset, res); |
| break; |
| } |
| |
| case T_SHORT: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->short_field_put(offset, (jshort)*((jint*)&val)); |
| break; |
| |
| case T_CHAR: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->char_field_put(offset, (jchar)*((jint*)&val)); |
| break; |
| |
| case T_BYTE: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->byte_field_put(offset, (jbyte)*((jint*)&val)); |
| break; |
| |
| case T_BOOLEAN: |
| assert(value->type() == T_INT, "Agreement."); |
| val = value->get_int(); |
| obj->bool_field_put(offset, (jboolean)*((jint*)&val)); |
| break; |
| |
| default: |
| ShouldNotReachHere(); |
| } |
| svIndex++; |
| } |
| return svIndex; |
| } |
| |
| // restore fields of all eliminated objects and arrays |
| void Deoptimization::reassign_fields(frame* fr, RegisterMap* reg_map, GrowableArray<ScopeValue*>* objects, bool realloc_failures, bool skip_internal) { |
| for (int i = 0; i < objects->length(); i++) { |
| ObjectValue* sv = (ObjectValue*) objects->at(i); |
| Klass* k = java_lang_Class::as_Klass(sv->klass()->as_ConstantOopReadValue()->value()()); |
| Handle obj = sv->value(); |
| assert(obj.not_null() || realloc_failures, "reallocation was missed"); |
| if (PrintDeoptimizationDetails) { |
| tty->print_cr("reassign fields for object of type %s!", k->name()->as_C_string()); |
| } |
| if (obj.is_null()) { |
| continue; |
| } |
| |
| if (k->is_instance_klass()) { |
| InstanceKlass* ik = InstanceKlass::cast(k); |
| reassign_fields_by_klass(ik, fr, reg_map, sv, 0, obj(), skip_internal); |
| } else if (k->is_typeArray_klass()) { |
| TypeArrayKlass* ak = TypeArrayKlass::cast(k); |
| reassign_type_array_elements(fr, reg_map, sv, (typeArrayOop) obj(), ak->element_type()); |
| } else if (k->is_objArray_klass()) { |
| reassign_object_array_elements(fr, reg_map, sv, (objArrayOop) obj()); |
| } |
| } |
| } |
| |
| |
| // relock objects for which synchronization was eliminated |
| void Deoptimization::relock_objects(GrowableArray<MonitorInfo*>* monitors, JavaThread* thread, bool realloc_failures) { |
| for (int i = 0; i < monitors->length(); i++) { |
| MonitorInfo* mon_info = monitors->at(i); |
| if (mon_info->eliminated()) { |
| assert(!mon_info->owner_is_scalar_replaced() || realloc_failures, "reallocation was missed"); |
| if (!mon_info->owner_is_scalar_replaced()) { |
| Handle obj(thread, mon_info->owner()); |
| markOop mark = obj->mark(); |
| if (UseBiasedLocking && mark->has_bias_pattern()) { |
| // New allocated objects may have the mark set to anonymously biased. |
| // Also the deoptimized method may called methods with synchronization |
| // where the thread-local object is bias locked to the current thread. |
| assert(mark->is_biased_anonymously() || |
| mark->biased_locker() == thread, "should be locked to current thread"); |
| // Reset mark word to unbiased prototype. |
| markOop unbiased_prototype = markOopDesc::prototype()->set_age(mark->age()); |
| obj->set_mark(unbiased_prototype); |
| } |
| BasicLock* lock = mon_info->lock(); |
| ObjectSynchronizer::slow_enter(obj, lock, thread); |
| assert(mon_info->owner()->is_locked(), "object must be locked now"); |
| } |
| } |
| } |
| } |
| |
| |
| #ifndef PRODUCT |
| // print information about reallocated objects |
| void Deoptimization::print_objects(GrowableArray<ScopeValue*>* objects, bool realloc_failures) { |
| fieldDescriptor fd; |
| |
| for (int i = 0; i < objects->length(); i++) { |
| ObjectValue* sv = (ObjectValue*) objects->at(i); |
| Klass* k = java_lang_Class::as_Klass(sv->klass()->as_ConstantOopReadValue()->value()()); |
| Handle obj = sv->value(); |
| |
| tty->print(" object <" INTPTR_FORMAT "> of type ", p2i(sv->value()())); |
| k->print_value(); |
| assert(obj.not_null() || realloc_failures, "reallocation was missed"); |
| if (obj.is_null()) { |
| tty->print(" allocation failed"); |
| } else { |
| tty->print(" allocated (%d bytes)", obj->size() * HeapWordSize); |
| } |
| tty->cr(); |
| |
| if (Verbose && !obj.is_null()) { |
| k->oop_print_on(obj(), tty); |
| } |
| } |
| } |
| #endif |
| #endif // COMPILER2_OR_JVMCI |
| |
| vframeArray* Deoptimization::create_vframeArray(JavaThread* thread, frame fr, RegisterMap *reg_map, GrowableArray<compiledVFrame*>* chunk, bool realloc_failures) { |
| Events::log_deopt_message(thread, "DEOPT PACKING pc=" INTPTR_FORMAT " sp=" INTPTR_FORMAT, p2i(fr.pc()), p2i(fr.sp())); |
| |
| #ifndef PRODUCT |
| if (PrintDeoptimizationDetails) { |
| ttyLocker ttyl; |
| tty->print("DEOPT PACKING thread " INTPTR_FORMAT " ", p2i(thread)); |
| fr.print_on(tty); |
| tty->print_cr(" Virtual frames (innermost first):"); |
| for (int index = 0; index < chunk->length(); index++) { |
| compiledVFrame* vf = chunk->at(index); |
| tty->print(" %2d - ", index); |
| vf->print_value(); |
| int bci = chunk->at(index)->raw_bci(); |
| const char* code_name; |
| if (bci == SynchronizationEntryBCI) { |
| code_name = "sync entry"; |
| } else { |
| Bytecodes::Code code = vf->method()->code_at(bci); |
| code_name = Bytecodes::name(code); |
| } |
| tty->print(" - %s", code_name); |
| tty->print_cr(" @ bci %d ", bci); |
| if (Verbose) { |
| vf->print(); |
| tty->cr(); |
| } |
| } |
| } |
| #endif |
| |
| // Register map for next frame (used for stack crawl). We capture |
| // the state of the deopt'ing frame's caller. Thus if we need to |
| // stuff a C2I adapter we can properly fill in the callee-save |
| // register locations. |
| frame caller = fr.sender(reg_map); |
| int frame_size = caller.sp() - fr.sp(); |
| |
| frame sender = caller; |
| |
| // Since the Java thread being deoptimized will eventually adjust it's own stack, |
| // the vframeArray containing the unpacking information is allocated in the C heap. |
| // For Compiler1, the caller of the deoptimized frame is saved for use by unpack_frames(). |
| vframeArray* array = vframeArray::allocate(thread, frame_size, chunk, reg_map, sender, caller, fr, realloc_failures); |
| |
| // Compare the vframeArray to the collected vframes |
| assert(array->structural_compare(thread, chunk), "just checking"); |
| |
| #ifndef PRODUCT |
| if (PrintDeoptimizationDetails) { |
| ttyLocker ttyl; |
| tty->print_cr(" Created vframeArray " INTPTR_FORMAT, p2i(array)); |
| } |
| #endif // PRODUCT |
| |
| return array; |
| } |
| |
| #if COMPILER2_OR_JVMCI |
| void Deoptimization::pop_frames_failed_reallocs(JavaThread* thread, vframeArray* array) { |
| // Reallocation of some scalar replaced objects failed. Record |
| // that we need to pop all the interpreter frames for the |
| // deoptimized compiled frame. |
| assert(thread->frames_to_pop_failed_realloc() == 0, "missed frames to pop?"); |
| thread->set_frames_to_pop_failed_realloc(array->frames()); |
| // Unlock all monitors here otherwise the interpreter will see a |
| // mix of locked and unlocked monitors (because of failed |
| // reallocations of synchronized objects) and be confused. |
| for (int i = 0; i < array->frames(); i++) { |
| MonitorChunk* monitors = array->element(i)->monitors(); |
| if (monitors != NULL) { |
| for (int j = 0; j < monitors->number_of_monitors(); j++) { |
| BasicObjectLock* src = monitors->at(j); |
| if (src->obj() != NULL) { |
| ObjectSynchronizer::fast_exit(src->obj(), src->lock(), thread); |
| } |
| } |
| array->element(i)->free_monitors(thread); |
| #ifdef ASSERT |
| array->element(i)->set_removed_monitors(); |
| #endif |
| } |
| } |
| } |
| #endif |
| |
| static void collect_monitors(compiledVFrame* cvf, GrowableArray<Handle>* objects_to_revoke) { |
| GrowableArray<MonitorInfo*>* monitors = cvf->monitors(); |
| Thread* thread = Thread::current(); |
| for (int i = 0; i < monitors->length(); i++) { |
| MonitorInfo* mon_info = monitors->at(i); |
| if (!mon_info->eliminated() && mon_info->owner() != NULL) { |
| objects_to_revoke->append(Handle(thread, mon_info->owner())); |
| } |
| } |
| } |
| |
| |
| void Deoptimization::revoke_biases_of_monitors(JavaThread* thread, frame fr, RegisterMap* map) { |
| if (!UseBiasedLocking) { |
| return; |
| } |
| |
| ResourceMark rm; |
| HandleMark hm; |
| GrowableArray<Handle>* objects_to_revoke = new GrowableArray<Handle>(); |
| |
| // Unfortunately we don't have a RegisterMap available in most of |
| // the places we want to call this routine so we need to walk the |
| // stack again to update the register map. |
| if (map == NULL || !map->update_map()) { |
| StackFrameStream sfs(thread, true); |
| bool found = false; |
| while (!found && !sfs.is_done()) { |
| frame* cur = sfs.current(); |
| sfs.next(); |
| found = cur->id() == fr.id(); |
| } |
| assert(found, "frame to be deoptimized not found on target thread's stack"); |
| map = sfs.register_map(); |
| } |
| |
| vframe* vf = vframe::new_vframe(&fr, map, thread); |
| compiledVFrame* cvf = compiledVFrame::cast(vf); |
| // Revoke monitors' biases in all scopes |
| while (!cvf->is_top()) { |
| collect_monitors(cvf, objects_to_revoke); |
| cvf = compiledVFrame::cast(cvf->sender()); |
| } |
| collect_monitors(cvf, objects_to_revoke); |
| |
| if (SafepointSynchronize::is_at_safepoint()) { |
| BiasedLocking::revoke_at_safepoint(objects_to_revoke); |
| } else { |
| BiasedLocking::revoke(objects_to_revoke); |
| } |
| } |
| |
| |
| void Deoptimization::revoke_biases_of_monitors(CodeBlob* cb) { |
| if (!UseBiasedLocking) { |
| return; |
| } |
| |
| assert(SafepointSynchronize::is_at_safepoint(), "must only be called from safepoint"); |
| GrowableArray<Handle>* objects_to_revoke = new GrowableArray<Handle>(); |
| for (JavaThreadIteratorWithHandle jtiwh; JavaThread *jt = jtiwh.next(); ) { |
| if (jt->has_last_Java_frame()) { |
| StackFrameStream sfs(jt, true); |
| while (!sfs.is_done()) { |
| frame* cur = sfs.current(); |
| if (cb->contains(cur->pc())) { |
| vframe* vf = vframe::new_vframe(cur, sfs.register_map(), jt); |
| compiledVFrame* cvf = compiledVFrame::cast(vf); |
| // Revoke monitors' biases in all scopes |
| while (!cvf->is_top()) { |
| collect_monitors(cvf, objects_to_revoke); |
| cvf = compiledVFrame::cast(cvf->sender()); |
| } |
| collect_monitors(cvf, objects_to_revoke); |
| } |
| sfs.next(); |
| } |
| } |
| } |
| BiasedLocking::revoke_at_safepoint(objects_to_revoke); |
| } |
| |
| |
| void Deoptimization::deoptimize_single_frame(JavaThread* thread, frame fr, Deoptimization::DeoptReason reason) { |
| assert(fr.can_be_deoptimized(), "checking frame type"); |
| |
| gather_statistics(reason, Action_none, Bytecodes::_illegal); |
| |
| if (LogCompilation && xtty != NULL) { |
| CompiledMethod* cm = fr.cb()->as_compiled_method_or_null(); |
| assert(cm != NULL, "only compiled methods can deopt"); |
| |
| ttyLocker ttyl; |
| xtty->begin_head("deoptimized thread='" UINTX_FORMAT "' reason='%s' pc='" INTPTR_FORMAT "'",(uintx)thread->osthread()->thread_id(), trap_reason_name(reason), p2i(fr.pc())); |
| cm->log_identity(xtty); |
| xtty->end_head(); |
| for (ScopeDesc* sd = cm->scope_desc_at(fr.pc()); ; sd = sd->sender()) { |
| xtty->begin_elem("jvms bci='%d'", sd->bci()); |
| xtty->method(sd->method()); |
| xtty->end_elem(); |
| if (sd->is_top()) break; |
| } |
| xtty->tail("deoptimized"); |
| } |
| |
| // Patch the compiled method so that when execution returns to it we will |
| // deopt the execution state and return to the interpreter. |
| fr.deoptimize(thread); |
| } |
| |
| void Deoptimization::deoptimize(JavaThread* thread, frame fr, RegisterMap *map) { |
| deoptimize(thread, fr, map, Reason_constraint); |
| } |
| |
| void Deoptimization::deoptimize(JavaThread* thread, frame fr, RegisterMap *map, DeoptReason reason) { |
| // Deoptimize only if the frame comes from compile code. |
| // Do not deoptimize the frame which is already patched |
| // during the execution of the loops below. |
| if (!fr.is_compiled_frame() || fr.is_deoptimized_frame()) { |
| return; |
| } |
| ResourceMark rm; |
| DeoptimizationMarker dm; |
| if (UseBiasedLocking) { |
| revoke_biases_of_monitors(thread, fr, map); |
| } |
| deoptimize_single_frame(thread, fr, reason); |
| |
| } |
| |
| #if INCLUDE_JVMCI |
| address Deoptimization::deoptimize_for_missing_exception_handler(CompiledMethod* cm) { |
| // there is no exception handler for this pc => deoptimize |
| cm->make_not_entrant(); |
| |
| // Use Deoptimization::deoptimize for all of its side-effects: |
| // revoking biases of monitors, gathering traps statistics, logging... |
| // it also patches the return pc but we do not care about that |
| // since we return a continuation to the deopt_blob below. |
| JavaThread* thread = JavaThread::current(); |
| RegisterMap reg_map(thread, UseBiasedLocking); |
| frame runtime_frame = thread->last_frame(); |
| frame caller_frame = runtime_frame.sender(®_map); |
| assert(caller_frame.cb()->as_compiled_method_or_null() == cm, "expect top frame compiled method"); |
| vframe* vf = vframe::new_vframe(&caller_frame, ®_map, thread); |
| compiledVFrame* cvf = compiledVFrame::cast(vf); |
| ScopeDesc* imm_scope = cvf->scope(); |
| MethodData* imm_mdo = get_method_data(thread, imm_scope->method(), true); |
| if (imm_mdo != NULL) { |
| ProfileData* pdata = imm_mdo->allocate_bci_to_data(imm_scope->bci(), NULL); |
| if (pdata != NULL && pdata->is_BitData()) { |
| BitData* bit_data = (BitData*) pdata; |
| bit_data->set_exception_seen(); |
| } |
| } |
| |
| Deoptimization::deoptimize(thread, caller_frame, ®_map, Deoptimization::Reason_not_compiled_exception_handler); |
| |
| MethodData* trap_mdo = get_method_data(thread, cm->method(), true); |
| if (trap_mdo != NULL) { |
| trap_mdo->inc_trap_count(Deoptimization::Reason_not_compiled_exception_handler); |
| } |
| |
| return SharedRuntime::deopt_blob()->unpack_with_exception_in_tls(); |
| } |
| #endif |
| |
| void Deoptimization::deoptimize_frame_internal(JavaThread* thread, intptr_t* id, DeoptReason reason) { |
| assert(thread == Thread::current() || SafepointSynchronize::is_at_safepoint(), |
| "can only deoptimize other thread at a safepoint"); |
| // Compute frame and register map based on thread and sp. |
| RegisterMap reg_map(thread, UseBiasedLocking); |
| frame fr = thread->last_frame(); |
| while (fr.id() != id) { |
| fr = fr.sender(®_map); |
| } |
| deoptimize(thread, fr, ®_map, reason); |
| } |
| |
| |
| void Deoptimization::deoptimize_frame(JavaThread* thread, intptr_t* id, DeoptReason reason) { |
| if (thread == Thread::current()) { |
| Deoptimization::deoptimize_frame_internal(thread, id, reason); |
| } else { |
| VM_DeoptimizeFrame deopt(thread, id, reason); |
| VMThread::execute(&deopt); |
| } |
| } |
| |
| void Deoptimization::deoptimize_frame(JavaThread* thread, intptr_t* id) { |
| deoptimize_frame(thread, id, Reason_constraint); |
| } |
| |
| // JVMTI PopFrame support |
| JRT_LEAF(void, Deoptimization::popframe_preserve_args(JavaThread* thread, int bytes_to_save, void* start_address)) |
| { |
| thread->popframe_preserve_args(in_ByteSize(bytes_to_save), start_address); |
| } |
| JRT_END |
| |
| MethodData* |
| Deoptimization::get_method_data(JavaThread* thread, const methodHandle& m, |
| bool create_if_missing) { |
| Thread* THREAD = thread; |
| MethodData* mdo = m()->method_data(); |
| if (mdo == NULL && create_if_missing && !HAS_PENDING_EXCEPTION) { |
| // Build an MDO. Ignore errors like OutOfMemory; |
| // that simply means we won't have an MDO to update. |
| Method::build_interpreter_method_data(m, THREAD); |
| if (HAS_PENDING_EXCEPTION) { |
| assert((PENDING_EXCEPTION->is_a(SystemDictionary::OutOfMemoryError_klass())), "we expect only an OOM error here"); |
| CLEAR_PENDING_EXCEPTION; |
| } |
| mdo = m()->method_data(); |
| } |
| return mdo; |
| } |
| |
| #if COMPILER2_OR_JVMCI |
| void Deoptimization::load_class_by_index(const constantPoolHandle& constant_pool, int index, TRAPS) { |
| // in case of an unresolved klass entry, load the class. |
| if (constant_pool->tag_at(index).is_unresolved_klass()) { |
| Klass* tk = constant_pool->klass_at_ignore_error(index, CHECK); |
| return; |
| } |
| |
| if (!constant_pool->tag_at(index).is_symbol()) return; |
| |
| Handle class_loader (THREAD, constant_pool->pool_holder()->class_loader()); |
| Symbol* symbol = constant_pool->symbol_at(index); |
| |
| // class name? |
| if (symbol->byte_at(0) != '(') { |
| Handle protection_domain (THREAD, constant_pool->pool_holder()->protection_domain()); |
| SystemDictionary::resolve_or_null(symbol, class_loader, protection_domain, CHECK); |
| return; |
| } |
| |
| // then it must be a signature! |
| ResourceMark rm(THREAD); |
| for (SignatureStream ss(symbol); !ss.is_done(); ss.next()) { |
| if (ss.is_object()) { |
| Symbol* class_name = ss.as_symbol(CHECK); |
| Handle protection_domain (THREAD, constant_pool->pool_holder()->protection_domain()); |
| SystemDictionary::resolve_or_null(class_name, class_loader, protection_domain, CHECK); |
| } |
| } |
| } |
| |
| |
| void Deoptimization::load_class_by_index(const constantPoolHandle& constant_pool, int index) { |
| EXCEPTION_MARK; |
| load_class_by_index(constant_pool, index, THREAD); |
| if (HAS_PENDING_EXCEPTION) { |
| // Exception happened during classloading. We ignore the exception here, since it |
| // is going to be rethrown since the current activation is going to be deoptimized and |
| // the interpreter will re-execute the bytecode. |
| CLEAR_PENDING_EXCEPTION; |
| // Class loading called java code which may have caused a stack |
| // overflow. If the exception was thrown right before the return |
| // to the runtime the stack is no longer guarded. Reguard the |
| // stack otherwise if we return to the uncommon trap blob and the |
| // stack bang causes a stack overflow we crash. |
| assert(THREAD->is_Java_thread(), "only a java thread can be here"); |
| JavaThread* thread = (JavaThread*)THREAD; |
| bool guard_pages_enabled = thread->stack_guards_enabled(); |
| if (!guard_pages_enabled) guard_pages_enabled = thread->reguard_stack(); |
| assert(guard_pages_enabled, "stack banging in uncommon trap blob may cause crash"); |
| } |
| } |
| |
| JRT_ENTRY(void, Deoptimization::uncommon_trap_inner(JavaThread* thread, jint trap_request)) { |
| HandleMark hm; |
| |
| // uncommon_trap() is called at the beginning of the uncommon trap |
| // handler. Note this fact before we start generating temporary frames |
| // that can confuse an asynchronous stack walker. This counter is |
| // decremented at the end of unpack_frames(). |
| thread->inc_in_deopt_handler(); |
| |
| // We need to update the map if we have biased locking. |
| #if INCLUDE_JVMCI |
| // JVMCI might need to get an exception from the stack, which in turn requires the register map to be valid |
| RegisterMap reg_map(thread, true); |
| #else |
| RegisterMap reg_map(thread, UseBiasedLocking); |
| #endif |
| frame stub_frame = thread->last_frame(); |
| frame fr = stub_frame.sender(®_map); |
| // Make sure the calling nmethod is not getting deoptimized and removed |
| // before we are done with it. |
| nmethodLocker nl(fr.pc()); |
| |
| // Log a message |
| Events::log_deopt_message(thread, "Uncommon trap: trap_request=" PTR32_FORMAT " fr.pc=" INTPTR_FORMAT " relative=" INTPTR_FORMAT, |
| trap_request, p2i(fr.pc()), fr.pc() - fr.cb()->code_begin()); |
| |
| { |
| ResourceMark rm; |
| |
| // Revoke biases of any monitors in the frame to ensure we can migrate them |
| revoke_biases_of_monitors(thread, fr, ®_map); |
| |
| DeoptReason reason = trap_request_reason(trap_request); |
| DeoptAction action = trap_request_action(trap_request); |
| #if INCLUDE_JVMCI |
| int debug_id = trap_request_debug_id(trap_request); |
| #endif |
| jint unloaded_class_index = trap_request_index(trap_request); // CP idx or -1 |
| |
| vframe* vf = vframe::new_vframe(&fr, ®_map, thread); |
| compiledVFrame* cvf = compiledVFrame::cast(vf); |
| |
| CompiledMethod* nm = cvf->code(); |
| |
| ScopeDesc* trap_scope = cvf->scope(); |
| |
| if (TraceDeoptimization) { |
| ttyLocker ttyl; |
| tty->print_cr(" bci=%d pc=" INTPTR_FORMAT ", relative_pc=" INTPTR_FORMAT ", method=%s" JVMCI_ONLY(", debug_id=%d"), trap_scope->bci(), p2i(fr.pc()), fr.pc() - nm->code_begin(), trap_scope->method()->name_and_sig_as_C_string() |
| #if INCLUDE_JVMCI |
| , debug_id |
| #endif |
| ); |
| } |
| |
| methodHandle trap_method = trap_scope->method(); |
| int trap_bci = trap_scope->bci(); |
| #if INCLUDE_JVMCI |
| long speculation = thread->pending_failed_speculation(); |
| if (nm->is_compiled_by_jvmci()) { |
| if (speculation != 0) { |
| oop speculation_log = nm->as_nmethod()->speculation_log(); |
| if (speculation_log != NULL) { |
| if (TraceDeoptimization || TraceUncollectedSpeculations) { |
| if (HotSpotSpeculationLog::lastFailed(speculation_log) != 0) { |
| tty->print_cr("A speculation that was not collected by the compiler is being overwritten"); |
| } |
| } |
| if (TraceDeoptimization) { |
| tty->print_cr("Saving speculation to speculation log"); |
| } |
| HotSpotSpeculationLog::set_lastFailed(speculation_log, speculation); |
| } else { |
| if (TraceDeoptimization) { |
| tty->print_cr("Speculation present but no speculation log"); |
| } |
| } |
| thread->set_pending_failed_speculation(0); |
| } else { |
| if (TraceDeoptimization) { |
| tty->print_cr("No speculation"); |
| } |
| } |
| } else { |
| assert(speculation == 0, "There should not be a speculation for method compiled by non-JVMCI compilers"); |
| } |
| |
| if (trap_bci == SynchronizationEntryBCI) { |
| trap_bci = 0; |
| thread->set_pending_monitorenter(true); |
| } |
| |
| if (reason == Deoptimization::Reason_transfer_to_interpreter) { |
| thread->set_pending_transfer_to_interpreter(true); |
| } |
| #endif |
| |
| Bytecodes::Code trap_bc = trap_method->java_code_at(trap_bci); |
| // Record this event in the histogram. |
| gather_statistics(reason, action, trap_bc); |
| |
| // Ensure that we can record deopt. history: |
| // Need MDO to record RTM code generation state. |
| bool create_if_missing = ProfileTraps || UseCodeAging RTM_OPT_ONLY( || UseRTMLocking ); |
| |
| methodHandle profiled_method; |
| #if INCLUDE_JVMCI |
| if (nm->is_compiled_by_jvmci()) { |
| profiled_method = nm->method(); |
| } else { |
| profiled_method = trap_method; |
| } |
| #else |
| profiled_method = trap_method; |
| #endif |
| |
| MethodData* trap_mdo = |
| get_method_data(thread, profiled_method, create_if_missing); |
| |
| // Log a message |
| Events::log_deopt_message(thread, "Uncommon trap: reason=%s action=%s pc=" INTPTR_FORMAT " method=%s @ %d %s", |
| trap_reason_name(reason), trap_action_name(action), p2i(fr.pc()), |
| trap_method->name_and_sig_as_C_string(), trap_bci, nm->compiler_name()); |
| |
| // Print a bunch of diagnostics, if requested. |
| if (TraceDeoptimization || LogCompilation) { |
| ResourceMark rm; |
| ttyLocker ttyl; |
| char buf[100]; |
| if (xtty != NULL) { |
| xtty->begin_head("uncommon_trap thread='" UINTX_FORMAT "' %s", |
| os::current_thread_id(), |
| format_trap_request(buf, sizeof(buf), trap_request)); |
| nm->log_identity(xtty); |
| } |
| Symbol* class_name = NULL; |
| bool unresolved = false; |
| if (unloaded_class_index >= 0) { |
| constantPoolHandle constants (THREAD, trap_method->constants()); |
| if (constants->tag_at(unloaded_class_index).is_unresolved_klass()) { |
| class_name = constants->klass_name_at(unloaded_class_index); |
| unresolved = true; |
| if (xtty != NULL) |
| xtty->print(" unresolved='1'"); |
| } else if (constants->tag_at(unloaded_class_index).is_symbol()) { |
| class_name = constants->symbol_at(unloaded_class_index); |
| } |
| if (xtty != NULL) |
| xtty->name(class_name); |
| } |
| if (xtty != NULL && trap_mdo != NULL && (int)reason < (int)MethodData::_trap_hist_limit) { |
| // Dump the relevant MDO state. |
| // This is the deopt count for the current reason, any previous |
| // reasons or recompiles seen at this point. |
| int dcnt = trap_mdo->trap_count(reason); |
| if (dcnt != 0) |
| xtty->print(" count='%d'", dcnt); |
| ProfileData* pdata = trap_mdo->bci_to_data(trap_bci); |
| int dos = (pdata == NULL)? 0: pdata->trap_state(); |
| if (dos != 0) { |
| xtty->print(" state='%s'", format_trap_state(buf, sizeof(buf), dos)); |
| if (trap_state_is_recompiled(dos)) { |
| int recnt2 = trap_mdo->overflow_recompile_count(); |
| if (recnt2 != 0) |
| xtty->print(" recompiles2='%d'", recnt2); |
| } |
| } |
| } |
| if (xtty != NULL) { |
| xtty->stamp(); |
| xtty->end_head(); |
| } |
| if (TraceDeoptimization) { // make noise on the tty |
| tty->print("Uncommon trap occurred in"); |
| nm->method()->print_short_name(tty); |
| tty->print(" compiler=%s compile_id=%d", nm->compiler_name(), nm->compile_id()); |
| #if INCLUDE_JVMCI |
| if (nm->is_nmethod()) { |
| char* installed_code_name = nm->as_nmethod()->jvmci_installed_code_name(buf, sizeof(buf)); |
| if (installed_code_name != NULL) { |
| tty->print(" (JVMCI: installed code name=%s) ", installed_code_name); |
| } |
| } |
| #endif |
| tty->print(" (@" INTPTR_FORMAT ") thread=" UINTX_FORMAT " reason=%s action=%s unloaded_class_index=%d" JVMCI_ONLY(" debug_id=%d"), |
| p2i(fr.pc()), |
| os::current_thread_id(), |
| trap_reason_name(reason), |
| trap_action_name(action), |
| unloaded_class_index |
| #if INCLUDE_JVMCI |
| , debug_id |
| #endif |
| ); |
| if (class_name != NULL) { |
| tty->print(unresolved ? " unresolved class: " : " symbol: "); |
| class_name->print_symbol_on(tty); |
| } |
| tty->cr(); |
| } |
| if (xtty != NULL) { |
| // Log the precise location of the trap. |
| for (ScopeDesc* sd = trap_scope; ; sd = sd->sender()) { |
| xtty->begin_elem("jvms bci='%d'", sd->bci()); |
| xtty->method(sd->method()); |
| xtty->end_elem(); |
| if (sd->is_top()) break; |
| } |
| xtty->tail("uncommon_trap"); |
| } |
| } |
| // (End diagnostic printout.) |
| |
| // Load class if necessary |
| if (unloaded_class_index >= 0) { |
| constantPoolHandle constants(THREAD, trap_method->constants()); |
| load_class_by_index(constants, unloaded_class_index); |
| } |
| |
| // Flush the nmethod if necessary and desirable. |
| // |
| // We need to avoid situations where we are re-flushing the nmethod |
| // because of a hot deoptimization site. Repeated flushes at the same |
| // point need to be detected by the compiler and avoided. If the compiler |
| // cannot avoid them (or has a bug and "refuses" to avoid them), this |
| // module must take measures to avoid an infinite cycle of recompilation |
| // and deoptimization. There are several such measures: |
| // |
| // 1. If a recompilation is ordered a second time at some site X |
| // and for the same reason R, the action is adjusted to 'reinterpret', |
| // to give the interpreter time to exercise the method more thoroughly. |
| // If this happens, the method's overflow_recompile_count is incremented. |
| // |
| // 2. If the compiler fails to reduce the deoptimization rate, then |
| // the method's overflow_recompile_count will begin to exceed the set |
| // limit PerBytecodeRecompilationCutoff. If this happens, the action |
| // is adjusted to 'make_not_compilable', and the method is abandoned |
| // to the interpreter. This is a performance hit for hot methods, |
| // but is better than a disastrous infinite cycle of recompilations. |
| // (Actually, only the method containing the site X is abandoned.) |
| // |
| // 3. In parallel with the previous measures, if the total number of |
| // recompilations of a method exceeds the much larger set limit |
| // PerMethodRecompilationCutoff, the method is abandoned. |
| // This should only happen if the method is very large and has |
| // many "lukewarm" deoptimizations. The code which enforces this |
| // limit is elsewhere (class nmethod, class Method). |
| // |
| // Note that the per-BCI 'is_recompiled' bit gives the compiler one chance |
| // to recompile at each bytecode independently of the per-BCI cutoff. |
| // |
| // The decision to update code is up to the compiler, and is encoded |
| // in the Action_xxx code. If the compiler requests Action_none |
| // no trap state is changed, no compiled code is changed, and the |
| // computation suffers along in the interpreter. |
| // |
| // The other action codes specify various tactics for decompilation |
| // and recompilation. Action_maybe_recompile is the loosest, and |
| // allows the compiled code to stay around until enough traps are seen, |
| // and until the compiler gets around to recompiling the trapping method. |
| // |
| // The other actions cause immediate removal of the present code. |
| |
| // Traps caused by injected profile shouldn't pollute trap counts. |
| bool injected_profile_trap = trap_method->has_injected_profile() && |
| (reason == Reason_intrinsic || reason == Reason_unreached); |
| |
| bool update_trap_state = (reason != Reason_tenured) && !injected_profile_trap; |
| bool make_not_entrant = false; |
| bool make_not_compilable = false; |
| bool reprofile = false; |
| switch (action) { |
| case Action_none: |
| // Keep the old code. |
| update_trap_state = false; |
| break; |
| case Action_maybe_recompile: |
| // Do not need to invalidate the present code, but we can |
| // initiate another |
| // Start compiler without (necessarily) invalidating the nmethod. |
| // The system will tolerate the old code, but new code should be |
| // generated when possible. |
| break; |
| case Action_reinterpret: |
| // Go back into the interpreter for a while, and then consider |
| // recompiling form scratch. |
| make_not_entrant = true; |
| // Reset invocation counter for outer most method. |
| // This will allow the interpreter to exercise the bytecodes |
| // for a while before recompiling. |
| // By contrast, Action_make_not_entrant is immediate. |
| // |
| // Note that the compiler will track null_check, null_assert, |
| // range_check, and class_check events and log them as if they |
| // had been traps taken from compiled code. This will update |
| // the MDO trap history so that the next compilation will |
| // properly detect hot trap sites. |
| reprofile = true; |
| break; |
| case Action_make_not_entrant: |
| // Request immediate recompilation, and get rid of the old code. |
| // Make them not entrant, so next time they are called they get |
| // recompiled. Unloaded classes are loaded now so recompile before next |
| // time they are called. Same for uninitialized. The interpreter will |
| // link the missing class, if any. |
| make_not_entrant = true; |
| break; |
| case Action_make_not_compilable: |
| // Give up on compiling this method at all. |
| make_not_entrant = true; |
| make_not_compilable = true; |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| |
| // Setting +ProfileTraps fixes the following, on all platforms: |
| // 4852688: ProfileInterpreter is off by default for ia64. The result is |
| // infinite heroic-opt-uncommon-trap/deopt/recompile cycles, since the |
| // recompile relies on a MethodData* to record heroic opt failures. |
| |
| // Whether the interpreter is producing MDO data or not, we also need |
| // to use the MDO to detect hot deoptimization points and control |
| // aggressive optimization. |
| bool inc_recompile_count = false; |
| ProfileData* pdata = NULL; |
| if (ProfileTraps && !is_client_compilation_mode_vm() && update_trap_state && trap_mdo != NULL) { |
| assert(trap_mdo == get_method_data(thread, profiled_method, false), "sanity"); |
| uint this_trap_count = 0; |
| bool maybe_prior_trap = false; |
| bool maybe_prior_recompile = false; |
| pdata = query_update_method_data(trap_mdo, trap_bci, reason, true, |
| #if INCLUDE_JVMCI |
| nm->is_compiled_by_jvmci() && nm->is_osr_method(), |
| #endif |
| nm->method(), |
| //outputs: |
| this_trap_count, |
| maybe_prior_trap, |
| maybe_prior_recompile); |
| // Because the interpreter also counts null, div0, range, and class |
| // checks, these traps from compiled code are double-counted. |
| // This is harmless; it just means that the PerXTrapLimit values |
| // are in effect a little smaller than they look. |
| |
| DeoptReason per_bc_reason = reason_recorded_per_bytecode_if_any(reason); |
| if (per_bc_reason != Reason_none) { |
| // Now take action based on the partially known per-BCI history. |
| if (maybe_prior_trap |
| && this_trap_count >= (uint)PerBytecodeTrapLimit) { |
| // If there are too many traps at this BCI, force a recompile. |
| // This will allow the compiler to see the limit overflow, and |
| // take corrective action, if possible. The compiler generally |
| // does not use the exact PerBytecodeTrapLimit value, but instead |
| // changes its tactics if it sees any traps at all. This provides |
| // a little hysteresis, delaying a recompile until a trap happens |
| // several times. |
| // |
| // Actually, since there is only one bit of counter per BCI, |
| // the possible per-BCI counts are {0,1,(per-method count)}. |
| // This produces accurate results if in fact there is only |
| // one hot trap site, but begins to get fuzzy if there are |
| // many sites. For example, if there are ten sites each |
| // trapping two or more times, they each get the blame for |
| // all of their traps. |
| make_not_entrant = true; |
| } |
| |
| // Detect repeated recompilation at the same BCI, and enforce a limit. |
| if (make_not_entrant && maybe_prior_recompile) { |
| // More than one recompile at this point. |
| inc_recompile_count = maybe_prior_trap; |
| } |
| } else { |
| // For reasons which are not recorded per-bytecode, we simply |
| // force recompiles unconditionally. |
| // (Note that PerMethodRecompilationCutoff is enforced elsewhere.) |
| make_not_entrant = true; |
| } |
| |
| // Go back to the compiler if there are too many traps in this method. |
| if (this_trap_count >= per_method_trap_limit(reason)) { |
| // If there are too many traps in this method, force a recompile. |
| // This will allow the compiler to see the limit overflow, and |
| // take corrective action, if possible. |
| // (This condition is an unlikely backstop only, because the |
| // PerBytecodeTrapLimit is more likely to take effect first, |
| // if it is applicable.) |
| make_not_entrant = true; |
| } |
| |
| // Here's more hysteresis: If there has been a recompile at |
| // this trap point already, run the method in the interpreter |
| // for a while to exercise it more thoroughly. |
| if (make_not_entrant && maybe_prior_recompile && maybe_prior_trap) { |
| reprofile = true; |
| } |
| } |
| |
| // Take requested actions on the method: |
| |
| // Recompile |
| if (make_not_entrant) { |
| if (!nm->make_not_entrant()) { |
| return; // the call did not change nmethod's state |
| } |
| |
| if (pdata != NULL) { |
| // Record the recompilation event, if any. |
| int tstate0 = pdata->trap_state(); |
| int tstate1 = trap_state_set_recompiled(tstate0, true); |
| if (tstate1 != tstate0) |
| pdata->set_trap_state(tstate1); |
| } |
| |
| #if INCLUDE_RTM_OPT |
| // Restart collecting RTM locking abort statistic if the method |
| // is recompiled for a reason other than RTM state change. |
| // Assume that in new recompiled code the statistic could be different, |
| // for example, due to different inlining. |
| if ((reason != Reason_rtm_state_change) && (trap_mdo != NULL) && |
| UseRTMDeopt && (nm->as_nmethod()->rtm_state() != ProfileRTM)) { |
| trap_mdo->atomic_set_rtm_state(ProfileRTM); |
| } |
| #endif |
| // For code aging we count traps separately here, using make_not_entrant() |
| // as a guard against simultaneous deopts in multiple threads. |
| if (reason == Reason_tenured && trap_mdo != NULL) { |
| trap_mdo->inc_tenure_traps(); |
| } |
| } |
| |
| if (inc_recompile_count) { |
| trap_mdo->inc_overflow_recompile_count(); |
| if ((uint)trap_mdo->overflow_recompile_count() > |
| (uint)PerBytecodeRecompilationCutoff) { |
| // Give up on the method containing the bad BCI. |
| if (trap_method() == nm->method()) { |
| make_not_compilable = true; |
| } else { |
| trap_method->set_not_compilable(CompLevel_full_optimization, true, "overflow_recompile_count > PerBytecodeRecompilationCutoff"); |
| // But give grace to the enclosing nm->method(). |
| } |
| } |
| } |
| |
| // Reprofile |
| if (reprofile) { |
| CompilationPolicy::policy()->reprofile(trap_scope, nm->is_osr_method()); |
| } |
| |
| // Give up compiling |
| if (make_not_compilable && !nm->method()->is_not_compilable(CompLevel_full_optimization)) { |
| assert(make_not_entrant, "consistent"); |
| nm->method()->set_not_compilable(CompLevel_full_optimization); |
| } |
| |
| } // Free marked resources |
| |
| } |
| JRT_END |
| |
| ProfileData* |
| Deoptimization::query_update_method_data(MethodData* trap_mdo, |
| int trap_bci, |
| Deoptimization::DeoptReason reason, |
| bool update_total_trap_count, |
| #if INCLUDE_JVMCI |
| bool is_osr, |
| #endif |
| Method* compiled_method, |
| //outputs: |
| uint& ret_this_trap_count, |
| bool& ret_maybe_prior_trap, |
| bool& ret_maybe_prior_recompile) { |
| bool maybe_prior_trap = false; |
| bool maybe_prior_recompile = false; |
| uint this_trap_count = 0; |
| if (update_total_trap_count) { |
| uint idx = reason; |
| #if INCLUDE_JVMCI |
| if (is_osr) { |
| // Upper half of history array used for traps in OSR compilations |
| idx += Reason_TRAP_HISTORY_LENGTH; |
| } |
| #endif |
| uint prior_trap_count = trap_mdo->trap_count(idx); |
| this_trap_count = trap_mdo->inc_trap_count(idx); |
| |
| // If the runtime cannot find a place to store trap history, |
| // it is estimated based on the general condition of the method. |
| // If the method has ever been recompiled, or has ever incurred |
| // a trap with the present reason , then this BCI is assumed |
| // (pessimistically) to be the culprit. |
| maybe_prior_trap = (prior_trap_count != 0); |
| maybe_prior_recompile = (trap_mdo->decompile_count() != 0); |
| } |
| ProfileData* pdata = NULL; |
| |
| |
| // For reasons which are recorded per bytecode, we check per-BCI data. |
| DeoptReason per_bc_reason = reason_recorded_per_bytecode_if_any(reason); |
| assert(per_bc_reason != Reason_none || update_total_trap_count, "must be"); |
| if (per_bc_reason != Reason_none) { |
| // Find the profile data for this BCI. If there isn't one, |
| // try to allocate one from the MDO's set of spares. |
| // This will let us detect a repeated trap at this point. |
| pdata = trap_mdo->allocate_bci_to_data(trap_bci, reason_is_speculate(reason) ? compiled_method : NULL); |
| |
| if (pdata != NULL) { |
| if (reason_is_speculate(reason) && !pdata->is_SpeculativeTrapData()) { |
| if (LogCompilation && xtty != NULL) { |
| ttyLocker ttyl; |
| // no more room for speculative traps in this MDO |
| xtty->elem("speculative_traps_oom"); |
| } |
| } |
| // Query the trap state of this profile datum. |
| int tstate0 = pdata->trap_state(); |
| if (!trap_state_has_reason(tstate0, per_bc_reason)) |
| maybe_prior_trap = false; |
| if (!trap_state_is_recompiled(tstate0)) |
| maybe_prior_recompile = false; |
| |
| // Update the trap state of this profile datum. |
| int tstate1 = tstate0; |
| // Record the reason. |
| tstate1 = trap_state_add_reason(tstate1, per_bc_reason); |
| // Store the updated state on the MDO, for next time. |
| if (tstate1 != tstate0) |
| pdata->set_trap_state(tstate1); |
| } else { |
| if (LogCompilation && xtty != NULL) { |
| ttyLocker ttyl; |
| // Missing MDP? Leave a small complaint in the log. |
| xtty->elem("missing_mdp bci='%d'", trap_bci); |
| } |
| } |
| } |
| |
| // Return results: |
| ret_this_trap_count = this_trap_count; |
| ret_maybe_prior_trap = maybe_prior_trap; |
| ret_maybe_prior_recompile = maybe_prior_recompile; |
| return pdata; |
| } |
| |
| void |
| Deoptimization::update_method_data_from_interpreter(MethodData* trap_mdo, int trap_bci, int reason) { |
| ResourceMark rm; |
| // Ignored outputs: |
| uint ignore_this_trap_count; |
| bool ignore_maybe_prior_trap; |
| bool ignore_maybe_prior_recompile; |
| assert(!reason_is_speculate(reason), "reason speculate only used by compiler"); |
| // JVMCI uses the total counts to determine if deoptimizations are happening too frequently -> do not adjust total counts |
| bool update_total_counts = true JVMCI_ONLY( && !UseJVMCICompiler); |
| query_update_method_data(trap_mdo, trap_bci, |
| (DeoptReason)reason, |
| update_total_counts, |
| #if INCLUDE_JVMCI |
| false, |
| #endif |
| NULL, |
| ignore_this_trap_count, |
| ignore_maybe_prior_trap, |
| ignore_maybe_prior_recompile); |
| } |
| |
| Deoptimization::UnrollBlock* Deoptimization::uncommon_trap(JavaThread* thread, jint trap_request, jint exec_mode) { |
| // Enable WXWrite: current function is called from methods compiled by C2 directly |
| MACOS_AARCH64_ONLY(ThreadWXEnable wx(WXWrite, thread)); |
| |
| if (TraceDeoptimization) { |
| tty->print("Uncommon trap "); |
| } |
| // Still in Java no safepoints |
| { |
| // This enters VM and may safepoint |
| uncommon_trap_inner(thread, trap_request); |
| } |
| HandleMark hm(thread); |
| return fetch_unroll_info_helper(thread, exec_mode); |
| } |
| |
| // Local derived constants. |
| // Further breakdown of DataLayout::trap_state, as promised by DataLayout. |
| const int DS_REASON_MASK = ((uint)DataLayout::trap_mask) >> 1; |
| const int DS_RECOMPILE_BIT = DataLayout::trap_mask - DS_REASON_MASK; |
| |
| //---------------------------trap_state_reason--------------------------------- |
| Deoptimization::DeoptReason |
| Deoptimization::trap_state_reason(int trap_state) { |
| // This assert provides the link between the width of DataLayout::trap_bits |
| // and the encoding of "recorded" reasons. It ensures there are enough |
| // bits to store all needed reasons in the per-BCI MDO profile. |
| assert(DS_REASON_MASK >= Reason_RECORDED_LIMIT, "enough bits"); |
| int recompile_bit = (trap_state & DS_RECOMPILE_BIT); |
| trap_state -= recompile_bit; |
| if (trap_state == DS_REASON_MASK) { |
| return Reason_many; |
| } else { |
| assert((int)Reason_none == 0, "state=0 => Reason_none"); |
| return (DeoptReason)trap_state; |
| } |
| } |
| //-------------------------trap_state_has_reason------------------------------- |
| int Deoptimization::trap_state_has_reason(int trap_state, int reason) { |
| assert(reason_is_recorded_per_bytecode((DeoptReason)reason), "valid reason"); |
| assert(DS_REASON_MASK >= Reason_RECORDED_LIMIT, "enough bits"); |
| int recompile_bit = (trap_state & DS_RECOMPILE_BIT); |
| trap_state -= recompile_bit; |
| if (trap_state == DS_REASON_MASK) { |
| return -1; // true, unspecifically (bottom of state lattice) |
| } else if (trap_state == reason) { |
| return 1; // true, definitely |
| } else if (trap_state == 0) { |
| return 0; // false, definitely (top of state lattice) |
| } else { |
| return 0; // false, definitely |
| } |
| } |
| //-------------------------trap_state_add_reason------------------------------- |
| int Deoptimization::trap_state_add_reason(int trap_state, int reason) { |
| assert(reason_is_recorded_per_bytecode((DeoptReason)reason) || reason == Reason_many, "valid reason"); |
| int recompile_bit = (trap_state & DS_RECOMPILE_BIT); |
| trap_state -= recompile_bit; |
| if (trap_state == DS_REASON_MASK) { |
| return trap_state + recompile_bit; // already at state lattice bottom |
| } else if (trap_state == reason) { |
| return trap_state + recompile_bit; // the condition is already true |
| } else if (trap_state == 0) { |
| return reason + recompile_bit; // no condition has yet been true |
| } else { |
| return DS_REASON_MASK + recompile_bit; // fall to state lattice bottom |
| } |
| } |
| //-----------------------trap_state_is_recompiled------------------------------ |
| bool Deoptimization::trap_state_is_recompiled(int trap_state) { |
| return (trap_state & DS_RECOMPILE_BIT) != 0; |
| } |
| //-----------------------trap_state_set_recompiled----------------------------- |
| int Deoptimization::trap_state_set_recompiled(int trap_state, bool z) { |
| if (z) return trap_state | DS_RECOMPILE_BIT; |
| else return trap_state & ~DS_RECOMPILE_BIT; |
| } |
| //---------------------------format_trap_state--------------------------------- |
| // This is used for debugging and diagnostics, including LogFile output. |
| const char* Deoptimization::format_trap_state(char* buf, size_t buflen, |
| int trap_state) { |
| assert(buflen > 0, "sanity"); |
| DeoptReason reason = trap_state_reason(trap_state); |
| bool recomp_flag = trap_state_is_recompiled(trap_state); |
| // Re-encode the state from its decoded components. |
| int decoded_state = 0; |
| if (reason_is_recorded_per_bytecode(reason) || reason == Reason_many) |
| decoded_state = trap_state_add_reason(decoded_state, reason); |
| if (recomp_flag) |
| decoded_state = trap_state_set_recompiled(decoded_state, recomp_flag); |
| // If the state re-encodes properly, format it symbolically. |
| // Because this routine is used for debugging and diagnostics, |
| // be robust even if the state is a strange value. |
| size_t len; |
| if (decoded_state != trap_state) { |
| // Random buggy state that doesn't decode?? |
| len = jio_snprintf(buf, buflen, "#%d", trap_state); |
| } else { |
| len = jio_snprintf(buf, buflen, "%s%s", |
| trap_reason_name(reason), |
| recomp_flag ? " recompiled" : ""); |
| } |
| return buf; |
| } |
| |
| |
| //--------------------------------statics-------------------------------------- |
| const char* Deoptimization::_trap_reason_name[] = { |
| // Note: Keep this in sync. with enum DeoptReason. |
| "none", |
| "null_check", |
| "null_assert" JVMCI_ONLY("_or_unreached0"), |
| "range_check", |
| "class_check", |
| "array_check", |
| "intrinsic" JVMCI_ONLY("_or_type_checked_inlining"), |
| "bimorphic" JVMCI_ONLY("_or_optimized_type_check"), |
| "profile_predicate", |
| "unloaded", |
| "uninitialized", |
| "unreached", |
| "unhandled", |
| "constraint", |
| "div0_check", |
| "age", |
| "predicate", |
| "loop_limit_check", |
| "speculate_class_check", |
| "speculate_null_check", |
| "speculate_null_assert", |
| "rtm_state_change", |
| "unstable_if", |
| "unstable_fused_if", |
| #if INCLUDE_JVMCI |
| "aliasing", |
| "transfer_to_interpreter", |
| "not_compiled_exception_handler", |
| "unresolved", |
| "jsr_mismatch", |
| #endif |
| "tenured" |
| }; |
| const char* Deoptimization::_trap_action_name[] = { |
| // Note: Keep this in sync. with enum DeoptAction. |
| "none", |
| "maybe_recompile", |
| "reinterpret", |
| "make_not_entrant", |
| "make_not_compilable" |
| }; |
| |
| const char* Deoptimization::trap_reason_name(int reason) { |
| // Check that every reason has a name |
| STATIC_ASSERT(sizeof(_trap_reason_name)/sizeof(const char*) == Reason_LIMIT); |
| |
| if (reason == Reason_many) return "many"; |
| if ((uint)reason < Reason_LIMIT) |
| return _trap_reason_name[reason]; |
| static char buf[20]; |
| sprintf(buf, "reason%d", reason); |
| return buf; |
| } |
| const char* Deoptimization::trap_action_name(int action) { |
| // Check that every action has a name |
| STATIC_ASSERT(sizeof(_trap_action_name)/sizeof(const char*) == Action_LIMIT); |
| |
| if ((uint)action < Action_LIMIT) |
| return _trap_action_name[action]; |
| static char buf[20]; |
| sprintf(buf, "action%d", action); |
| return buf; |
| } |
| |
| // This is used for debugging and diagnostics, including LogFile output. |
| const char* Deoptimization::format_trap_request(char* buf, size_t buflen, |
| int trap_request) { |
| jint unloaded_class_index = trap_request_index(trap_request); |
| const char* reason = trap_reason_name(trap_request_reason(trap_request)); |
| const char* action = trap_action_name(trap_request_action(trap_request)); |
| #if INCLUDE_JVMCI |
| int debug_id = trap_request_debug_id(trap_request); |
| #endif |
| size_t len; |
| if (unloaded_class_index < 0) { |
| len = jio_snprintf(buf, buflen, "reason='%s' action='%s'" JVMCI_ONLY(" debug_id='%d'"), |
| reason, action |
| #if INCLUDE_JVMCI |
| ,debug_id |
| #endif |
| ); |
| } else { |
| len = jio_snprintf(buf, buflen, "reason='%s' action='%s' index='%d'" JVMCI_ONLY(" debug_id='%d'"), |
| reason, action, unloaded_class_index |
| #if INCLUDE_JVMCI |
| ,debug_id |
| #endif |
| ); |
| } |
| return buf; |
| } |
| |
| juint Deoptimization::_deoptimization_hist |
| [Deoptimization::Reason_LIMIT] |
| [1 + Deoptimization::Action_LIMIT] |
| [Deoptimization::BC_CASE_LIMIT] |
| = {0}; |
| |
| enum { |
| LSB_BITS = 8, |
| LSB_MASK = right_n_bits(LSB_BITS) |
| }; |
| |
| void Deoptimization::gather_statistics(DeoptReason reason, DeoptAction action, |
| Bytecodes::Code bc) { |
| assert(reason >= 0 && reason < Reason_LIMIT, "oob"); |
| assert(action >= 0 && action < Action_LIMIT, "oob"); |
| _deoptimization_hist[Reason_none][0][0] += 1; // total |
| _deoptimization_hist[reason][0][0] += 1; // per-reason total |
| juint* cases = _deoptimization_hist[reason][1+action]; |
| juint* bc_counter_addr = NULL; |
| juint bc_counter = 0; |
| // Look for an unused counter, or an exact match to this BC. |
| if (bc != Bytecodes::_illegal) { |
| for (int bc_case = 0; bc_case < BC_CASE_LIMIT; bc_case++) { |
| juint* counter_addr = &cases[bc_case]; |
| juint counter = *counter_addr; |
| if ((counter == 0 && bc_counter_addr == NULL) |
| || (Bytecodes::Code)(counter & LSB_MASK) == bc) { |
| // this counter is either free or is already devoted to this BC |
| bc_counter_addr = counter_addr; |
| bc_counter = counter | bc; |
| } |
| } |
| } |
| if (bc_counter_addr == NULL) { |
| // Overflow, or no given bytecode. |
| bc_counter_addr = &cases[BC_CASE_LIMIT-1]; |
| bc_counter = (*bc_counter_addr & ~LSB_MASK); // clear LSB |
| } |
| *bc_counter_addr = bc_counter + (1 << LSB_BITS); |
| } |
| |
| jint Deoptimization::total_deoptimization_count() { |
| return _deoptimization_hist[Reason_none][0][0]; |
| } |
| |
| jint Deoptimization::deoptimization_count(DeoptReason reason) { |
| assert(reason >= 0 && reason < Reason_LIMIT, "oob"); |
| return _deoptimization_hist[reason][0][0]; |
| } |
| |
| void Deoptimization::print_statistics() { |
| juint total = total_deoptimization_count(); |
| juint account = total; |
| if (total != 0) { |
| ttyLocker ttyl; |
| if (xtty != NULL) xtty->head("statistics type='deoptimization'"); |
| tty->print_cr("Deoptimization traps recorded:"); |
| #define PRINT_STAT_LINE(name, r) \ |
| tty->print_cr(" %4d (%4.1f%%) %s", (int)(r), ((r) * 100.0) / total, name); |
| PRINT_STAT_LINE("total", total); |
| // For each non-zero entry in the histogram, print the reason, |
| // the action, and (if specifically known) the type of bytecode. |
| for (int reason = 0; reason < Reason_LIMIT; reason++) { |
| for (int action = 0; action < Action_LIMIT; action++) { |
| juint* cases = _deoptimization_hist[reason][1+action]; |
| for (int bc_case = 0; bc_case < BC_CASE_LIMIT; bc_case++) { |
| juint counter = cases[bc_case]; |
| if (counter != 0) { |
| char name[1*K]; |
| Bytecodes::Code bc = (Bytecodes::Code)(counter & LSB_MASK); |
| if (bc_case == BC_CASE_LIMIT && (int)bc == 0) |
| bc = Bytecodes::_illegal; |
| sprintf(name, "%s/%s/%s", |
| trap_reason_name(reason), |
| trap_action_name(action), |
| Bytecodes::is_defined(bc)? Bytecodes::name(bc): "other"); |
| juint r = counter >> LSB_BITS; |
| tty->print_cr(" %40s: " UINT32_FORMAT " (%.1f%%)", name, r, (r * 100.0) / total); |
| account -= r; |
| } |
| } |
| } |
| } |
| if (account != 0) { |
| PRINT_STAT_LINE("unaccounted", account); |
| } |
| #undef PRINT_STAT_LINE |
| if (xtty != NULL) xtty->tail("statistics"); |
| } |
| } |
| #else // COMPILER2_OR_JVMCI |
| |
| |
| // Stubs for C1 only system. |
| bool Deoptimization::trap_state_is_recompiled(int trap_state) { |
| return false; |
| } |
| |
| const char* Deoptimization::trap_reason_name(int reason) { |
| return "unknown"; |
| } |
| |
| void Deoptimization::print_statistics() { |
| // no output |
| } |
| |
| void |
| Deoptimization::update_method_data_from_interpreter(MethodData* trap_mdo, int trap_bci, int reason) { |
| // no udpate |
| } |
| |
| int Deoptimization::trap_state_has_reason(int trap_state, int reason) { |
| return 0; |
| } |
| |
| void Deoptimization::gather_statistics(DeoptReason reason, DeoptAction action, |
| Bytecodes::Code bc) { |
| // no update |
| } |
| |
| const char* Deoptimization::format_trap_state(char* buf, size_t buflen, |
| int trap_state) { |
| jio_snprintf(buf, buflen, "#%d", trap_state); |
| return buf; |
| } |
| |
| #endif // COMPILER2_OR_JVMCI |