| /* Copyright (c) 2014 The Chromium OS Authors. All rights reserved. | |
| * Use of this source code is governed by a BSD-style license that can be | |
| * found in the LICENSE file. | |
| */ | |
| /* Host command master module for Chrome EC */ | |
| #include "common.h" | |
| #include "console.h" | |
| #include "host_command.h" | |
| #include "i2c.h" | |
| #include "task.h" | |
| #include "timer.h" | |
| #include "usb_pd.h" | |
| #include "util.h" | |
| /* Console output macros */ | |
| #define CPUTS(outstr) cputs(CC_HOSTCMD, outstr) | |
| #define CPRINTF(format, args...) cprintf(CC_HOSTCMD, format, ## args) | |
| /* Number of attempts for each PD host command */ | |
| #define PD_HOST_COMMAND_ATTEMPTS 3 | |
| static struct mutex pd_mutex; | |
| /** | |
| * Non-task-safe internal version of pd_host_command(). | |
| * | |
| * Do not call this version directly! Use pd_host_command(). | |
| */ | |
| static int pd_host_command_internal(int command, int version, | |
| const void *outdata, int outsize, | |
| void *indata, int insize) | |
| { | |
| int ret, i; | |
| int resp_len; | |
| struct ec_host_request rq; | |
| struct ec_host_response rs; | |
| static uint8_t req_buf[EC_LPC_HOST_PACKET_SIZE]; | |
| static uint8_t resp_buf[EC_LPC_HOST_PACKET_SIZE]; | |
| uint8_t sum = 0; | |
| const uint8_t *c; | |
| uint8_t *d; | |
| /* Fail if output size is too big */ | |
| if (outsize + sizeof(rq) > EC_LPC_HOST_PACKET_SIZE) | |
| return -EC_RES_REQUEST_TRUNCATED; | |
| /* Fill in request packet */ | |
| rq.struct_version = EC_HOST_REQUEST_VERSION; | |
| rq.checksum = 0; | |
| rq.command = command; | |
| rq.command_version = version; | |
| rq.reserved = 0; | |
| rq.data_len = outsize; | |
| /* Copy data and start checksum */ | |
| for (i = 0, c = (const uint8_t *)outdata; i < outsize; i++, c++) { | |
| req_buf[sizeof(rq) + 1 + i] = *c; | |
| sum += *c; | |
| } | |
| /* Finish checksum */ | |
| for (i = 0, c = (const uint8_t *)&rq; i < sizeof(rq); i++, c++) | |
| sum += *c; | |
| /* Write checksum field so the entire packet sums to 0 */ | |
| rq.checksum = (uint8_t)(-sum); | |
| /* Copy header */ | |
| for (i = 0, c = (const uint8_t *)&rq; i < sizeof(rq); i++, c++) | |
| req_buf[1 + i] = *c; | |
| /* Set command to use protocol v3 */ | |
| req_buf[0] = EC_COMMAND_PROTOCOL_3; | |
| /* | |
| * Transmit all data and receive 2 bytes for return value and response | |
| * length. | |
| */ | |
| i2c_lock(I2C_PORT_PD_MCU, 1); | |
| i2c_set_timeout(I2C_PORT_PD_MCU, PD_HOST_COMMAND_TIMEOUT_US); | |
| ret = i2c_xfer(I2C_PORT_PD_MCU, CONFIG_USB_PD_I2C_SLAVE_ADDR, | |
| &req_buf[0], outsize + sizeof(rq) + 1, &resp_buf[0], | |
| 2, I2C_XFER_START); | |
| i2c_set_timeout(I2C_PORT_PD_MCU, 0); | |
| if (ret) { | |
| i2c_lock(I2C_PORT_PD_MCU, 0); | |
| CPRINTF("[%T i2c transaction 1 failed: %d]\n", ret); | |
| return -EC_RES_BUS_ERROR; | |
| } | |
| resp_len = resp_buf[1]; | |
| if (resp_len > (insize + sizeof(rs))) { | |
| /* Do a dummy read to generate stop condition */ | |
| i2c_xfer(I2C_PORT_PD_MCU, CONFIG_USB_PD_I2C_SLAVE_ADDR, | |
| 0, 0, &resp_buf[2], 1, I2C_XFER_STOP); | |
| i2c_lock(I2C_PORT_PD_MCU, 0); | |
| CPRINTF("[%T response size is too large %d > %d]\n", | |
| resp_len, insize + sizeof(rs)); | |
| return -EC_RES_RESPONSE_TOO_BIG; | |
| } | |
| /* Receive remaining data */ | |
| ret = i2c_xfer(I2C_PORT_PD_MCU, CONFIG_USB_PD_I2C_SLAVE_ADDR, 0, 0, | |
| &resp_buf[2], resp_len, I2C_XFER_STOP); | |
| i2c_lock(I2C_PORT_PD_MCU, 0); | |
| if (ret) { | |
| CPRINTF("[%T i2c transaction 2 failed: %d]\n", ret); | |
| return -EC_RES_BUS_ERROR; | |
| } | |
| /* Check for host command error code */ | |
| ret = resp_buf[0]; | |
| if (ret) { | |
| CPRINTF("[%T command 0x%02x returned error %d]\n", command, | |
| ret); | |
| return -ret; | |
| } | |
| /* Read back response header and start checksum */ | |
| sum = 0; | |
| for (i = 0, d = (uint8_t *)&rs; i < sizeof(rs); i++, d++) { | |
| *d = resp_buf[i + 2]; | |
| sum += *d; | |
| } | |
| if (rs.struct_version != EC_HOST_RESPONSE_VERSION) { | |
| CPRINTF("[%T PD response version mismatch]\n"); | |
| return -EC_RES_INVALID_RESPONSE; | |
| } | |
| if (rs.reserved) { | |
| CPRINTF("[%T PD response reserved != 0]\n"); | |
| return -EC_RES_INVALID_RESPONSE; | |
| } | |
| if (rs.data_len > insize) { | |
| CPRINTF("[%T PD returned too much data]\n"); | |
| return -EC_RES_RESPONSE_TOO_BIG; | |
| } | |
| /* Read back data and update checksum */ | |
| resp_len -= sizeof(rs); | |
| for (i = 0, d = (uint8_t *)indata; i < resp_len; i++, d++) { | |
| *d = resp_buf[sizeof(rs) + i + 2]; | |
| sum += *d; | |
| } | |
| if ((uint8_t)sum) { | |
| CPRINTF("[%T command 0x%02x bad checksum returned: " | |
| "%d]\n", command, sum); | |
| return -EC_RES_INVALID_CHECKSUM; | |
| } | |
| /* Return output buffer size */ | |
| return resp_len; | |
| } | |
| int pd_host_command(int command, int version, | |
| const void *outdata, int outsize, | |
| void *indata, int insize) | |
| { | |
| int rv; | |
| int tries = 0; | |
| /* Try multiple times to send host command. */ | |
| for (tries = 0; tries < PD_HOST_COMMAND_ATTEMPTS; tries++) { | |
| /* Acquire mutex */ | |
| mutex_lock(&pd_mutex); | |
| /* Call internal version of host command */ | |
| rv = pd_host_command_internal(command, version, outdata, | |
| outsize, indata, insize); | |
| /* Release mutex */ | |
| mutex_unlock(&pd_mutex); | |
| /* If host command error due to i2c bus error, try again. */ | |
| if (rv != -EC_RES_BUS_ERROR) | |
| break; | |
| task_wait_event(50*MSEC); | |
| } | |
| return rv; | |
| } | |
| static int command_pd_mcu(int argc, char **argv) | |
| { | |
| char *e; | |
| static char __bss_slow outbuf[128]; | |
| static char __bss_slow inbuf[128]; | |
| int command, version; | |
| int i, ret, tmp; | |
| if (argc < 3) | |
| return EC_ERROR_PARAM_COUNT; | |
| command = strtoi(argv[1], &e, 0); | |
| if (*e) | |
| return EC_ERROR_PARAM1; | |
| version = strtoi(argv[2], &e, 0); | |
| if (*e) | |
| return EC_ERROR_PARAM2; | |
| for (i = 3; i < argc; i++) { | |
| tmp = strtoi(argv[i], &e, 0); | |
| if (*e) | |
| return EC_ERROR_PARAM3; | |
| outbuf[i-3] = tmp; | |
| } | |
| ret = pd_host_command(command, version, &outbuf, argc - 3, &inbuf, | |
| sizeof(inbuf)); | |
| ccprintf("Host command 0x%02x, returned %d\n", command, ret); | |
| for (i = 0; i < ret; i++) | |
| ccprintf("0x%02x\n", inbuf[i]); | |
| return EC_SUCCESS; | |
| } | |
| DECLARE_CONSOLE_COMMAND(pdcmd, command_pd_mcu, | |
| "cmd ver [params]", | |
| "Send PD host command", | |
| NULL); | |