| 2005-05-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.ac (AC_INIT): Upgraded to 0.97. |
| |
| * compile: Copied from Automake 1.9.4. |
| * config.guess: Likewise. |
| * config.sub: Likewise. |
| * depcomp: Likewise. |
| * install-sh: Likewise. |
| * missing: Likewise. |
| * mkinstalldirs: Likewise. |
| * mdate-sh: Likewise. |
| * docs/texinfo.tex: Likewise. |
| |
| 2005-05-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/fsys_xfs.c (next_dentry): Use arrays of arrays instead of |
| arrays of pointers for USUAL, to avoid read-only strings. Reported |
| by Sven Wegener <swegener@gentoo.org>. |
| |
| 2005-03-28 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * lib/device.c (get_drive_geometry): Use ST.ST_SIZE instead of |
| ST.ST_BLOCKS to get the total number of sectors, because st_blocks |
| is not the same if it is a sparse file. |
| |
| 2005-03-19 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/stage2.c (cmain): Initialize DEFAULT_FILE to an empty |
| string. Reported by NATORI Shin <natori@adm.s.u-tokyo.ac.jp>. |
| |
| 2005-03-15 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/fsys_fat.c (fat_mount): Ignore the 3rd bit of a media |
| descriptor, because some BIOSes overwrite this value, according |
| to the storage mode (e.g. USB Floppy or USB HDD). |
| |
| 2005-02-16 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * grub/asmstub.c (grub_stage2): Remove the attribute `volatile' |
| from doit. I hope this change is safe for all compilers. |
| |
| 2005-02-15 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (install_func): If DEST_DRIVE is a hard |
| disk, enable the workaround in Stage 1 by replacing the jmp |
| with double nop's. |
| |
| * stage1/stage1.h (STAGE1_BOOT_DRIVE_CHECK): New macro. |
| (STAGE1_BOOT_DRIVE_MASK): Removed. |
| |
| * stage1/stage1.S (boot_drive_check): New label. This implements |
| a different workaround for buggy BIOSes which don't pass boot |
| drive correctly. This is effective for BIOSes which pass a value |
| without the seventh bit (0x80). |
| (boot_drive_mask): Removed. |
| |
| 2005-02-03 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * grub/asmstub.c (console_current_color): Make it global as |
| declared. |
| (grub_stage2): Tweak the declaration and the definition of the |
| nested function doit. |
| |
| 2005-02-02 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/smp-imps.h (imps_any_new_apics): Removed. |
| (imps_enabled): Likewise. |
| (imps_lapic_addr): Likewise. |
| (imps_num_cpus): Likewise. |
| (imps_cpu_apic_map): Likewise. |
| (imps_apic_cpu_map): Likewise. |
| |
| * stage2/Makefile.am (libgrub_a_CFLAGS): Remove |
| -fwritable-strings. Not required for the grub shell actually. |
| |
| * grub/Makefile.am (AM_CFLAGS): Likewise. |
| |
| 2005-02-01 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * grub/asmstub.c (grub_stage2): Use auto instead of static for |
| nested functions. |
| |
| * stage2/char_io.c (memcheck) [GRUB_UTIL]: Likewise. |
| |
| * stage2/builtins.c (blocklist_func): Likewise. |
| (color_func): Likewise. |
| (install_func): Likewise. |
| (setkey_func): Likewise. |
| |
| * lib/device.c (read_device_map): Likewise. |
| |
| 2005-01-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.ac (AC_INIT): Upgraded to 0.96. |
| |
| 2004-10-11 Jason Thomas <jason@staff.pnc.com.au> |
| |
| Patch from Stefanus Du Toit <sjdutoit@uwaterloo.ca> |
| * docs/kernel.c.texi (cmain): Incremement mod by one, instead of |
| sizeof(module_t), since it's already a pointer of type module_t. |
| * docs/kernel.c (cmain): Do the same. |
| |
| 2004-09-20 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/internals.texi (Internals): Changed to an appendix. |
| |
| * docs/grub.texi (@setchapternewpage): Changed to odd from off. |
| (@contents): Moved to the beginning. |
| (Future): Changed to an appendix. |
| |
| 2004-08-17 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/cmdline.c (run_script): Fix a reversed conditional. |
| Reported by Alban Crequy <alban.crequy@apinc.org>. |
| |
| 2004-08-07 Jason Thomas <jason@staff.pnc.com.au> |
| |
| From Michael Hohnbaum <hohnbaum@us.ibm.com>: |
| * stage2/fsys_ext2fs.c (ext2fs_read): Handle sparse files. |
| |
| 2004-07-24 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/stage2.c (cmain): Terminate DEFAULT_FILE with NUL |
| correctly. Reported by Alban Crequy <alban.crequy@apinc.org>. |
| |
| 2004-07-21 Robert Millan <robertmh@gnu.org> |
| |
| Patch from David Weinehall <tao@debian.org> |
| * util/mkbimage: Fix XSI-isms (for supporting POSIX-only shells). |
| |
| 2004-07-20 Robert Millan <robertmh@gnu.org> |
| |
| * util/grub-install.in: Detect GNU/k*BSD systems as well. |
| |
| 2004-07-16 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * util/grub-install.in (convert): Fix the sed statement for |
| Linux. The expression was ambigious in some cases. |
| |
| 2004-06-29 Robert Millan <robertmh@gnu.org> |
| |
| * util/grub-set-default.in: Fix minor syntax error (non-escaped |
| characters). |
| |
| 2004-06-24 Robert Millan <robertmh@gnu.org> |
| |
| Fixes for FHS compliance. (/usr/share is for arch-independant data) |
| * stage1/Makefile.am: Move stage files to pkglibdir. |
| * stage2/Makefile.am: Likewise. |
| * docs/grub.texi: s,/usr/share,/usr/lib,g. |
| * util/grub-image.in: Look for stage files in pkglibdir. |
| * util/grub-install.in: Likewise. |
| |
| * util/grub-install.in: Improve usage message. |
| |
| 2004-06-20 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| This is a big change on saving a default entry. This change |
| makes it possible to set up a quite robust system using GRUB. |
| Now we do not use the second sector of Stage 2 to store an |
| entry number but use the file /boot/grub/default. This file |
| must be generated by grub-set-default, although this file is |
| plain-text. |
| |
| * util/grub-set-default.in: New file. |
| |
| * util/grub-install.in (grub_set_default): New variable. |
| Use /grub instead of /boot/grub on OpenBSD as well as NetBSD. |
| Run grub-set-default to make a default file. |
| |
| * util/Makefile.am (sbin_SCRIPTS): Added grub-set-default. |
| |
| * stage2/stage2.c (run_menu): Change the fallback handling to |
| support multiple fallback entries. |
| (cmain): Likewise. Also, get a saved entry from a default file |
| if possible, before reading a config file. |
| |
| * stage2/shared.h (DEFAULT_FILE_BUF): New macro. |
| (DEFAULT_FILE_BUFLEN): Likewise. |
| (CMDLINE_BUF): Set to DEFAULT_FILE_BUF + DEFAULT_FILE_BUFLEN. |
| (MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - MENU_BUF. |
| (fallback_entry): Removed. |
| (fallback_entries): Declared. |
| (fallback_entryno): Likewise. |
| (MAX_FALLBACK_ENTRIES): New macro. |
| |
| * stage2/cmdline.c (run_script): Use FALLBACK_ENTRYNO instead of |
| FALLBACK_ENTRY. |
| |
| * stage2/builtins.c (fallback_entry): Removed. |
| (fallback_entryno): New variable. |
| (fallback_entries): Likewise. |
| (init_config): Initialize FALLBACK_ENTRYNO and FALLBACK_ENTRIES. |
| (fallback_func): Rewritten completely. |
| (savedefault_func): Likewise. |
| |
| * docs/grub.texi (grub-set-default): New direntry. |
| (Installation): Describe grub-set-default for manual |
| installations. |
| (Making your system robust): New section. |
| (Booting once-only): New subsection. |
| (Booting fallback systems): Likewise. |
| (fallback): Describe multiple fallback entries. |
| (savedefault): Describe an optional argument. |
| (Invoking grub-set-default): New chapter. |
| (Future): Replaced with a description about GRUB 2. |
| |
| * configure.ac (AC_CONFIG_FILES): Added util/grub-set-default. |
| |
| 2004-06-19 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/ufs2.h (int8_t): Renamed to ... |
| (grub_uint8_t): ... this. |
| (int16_t): Renamed to ... |
| (grub_int16_t): ... this. |
| (int32_t): Renamed to ... |
| (grub_int32_t): ... this. |
| (int64_t): Renamed to ... |
| (grub_int64_t): ... this. |
| (uint8_t): Renamed to ... |
| (grub_uint8_t): ... this. |
| (uint16_t): Renamed to ... |
| (grub_uint16_t): ... this. |
| (uint32_t): Renamed to ... |
| (grub_uint32_t): ... this. |
| (uint64_t): Renamed to ... |
| (grub_uint64_t): ... this. |
| (u_char): Renamed to ... |
| (grub_u_char): ... this. |
| (u_int): Renamed to ... |
| (grub_u_int): ... this. |
| (u_int8_t): Renamed to ... |
| (grub_u_int8_t): ... this. |
| (u_int16_t): Renamed to ... |
| (grub_u_int16_t): ... this. |
| (u_int32_t): Renamed to ... |
| (grub_u_int32_t): ... this. |
| (u_int64_t): Renamed to ... |
| (grub_u_int64_t): ... this. |
| (ino_t): Renamed to ... |
| (grub_ino_t): ... this. |
| All callers are changed. |
| |
| 2004-06-14 Jeroen Dekkers <jeroen@dekkers.cx> |
| |
| * stage2/ufs2.h (__uint8_t): Remove. |
| (__uint16_t): Likewise. |
| (__uint32_t): Likewise. |
| (__uint64_t): Likewise. |
| (ino_t): Typedef to uint32_t. |
| |
| 2004-06-13 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/Makefile.am (noinst_HEADERS): Added ufs2.h. |
| |
| 2004-06-13 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.ac (AC_INIT): Upgraded to 0.95. |
| |
| 2004-05-23 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/char_io.c (grub_isspace): Use a switch sentense instead |
| of an if sentense, because that reduces the size. |
| |
| * lib/device.c (read_device_map): Change the max number of DRIVE |
| to 127 from 8. This was too strict. |
| |
| * stage2/asm.S (stop_floppy): Call pusha and popa outside the |
| block of real mode code. Reported by Guillem Jover |
| <guillem@debian.org>. |
| |
| 2004-05-20 Damian Ivereigh <damian@cisco.com> |
| |
| * netboot/main.c: Fixed bootp only code so that options |
| work properly. This fix is obvious when compared with the |
| DHCP code. |
| |
| 2004-05-17 Pavel Roskin <proski@gnu.org> |
| |
| * stage2/char_io.c (safe_parse_maxint): Disable for stage 1.5. |
| (grub_tolower): Disable for stage 1.5 except fat_stage1_5. |
| (grub_memcmp): Disable for stage 1.5 except iso9660_stage1_5. |
| |
| 2004-05-14 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Sergey Matveychuk <sem@ciam.ru>: |
| * stage2/size_test: Added a check for ufs2_stage1_5. |
| |
| * stage2/shared.h (STAGE2_ID_UFS2_STAGE1_5): New macro. |
| [FSYS_UFS2] (STAGE2_ID): Set to STAGE2_ID_UFS2_STAGE1_5. |
| |
| * stage2/filesys.h (FSYS_UFS2_NUM): New macro. |
| [FSYS_UFS2] (ufs2_mount): New prototype. |
| [FSYS_UFS2] (ufs2_read): Likewise. |
| [FSYS_UFS2] (ufs2_dir): Likewise. |
| [FSYS_UFS2] (ufs2_embed): Likewise. |
| (NUM_FSYS): Added FSYS_UFS2_NUM. |
| |
| * stage2/disk_io.c (fsys_table): Added an ufs2 entry. |
| |
| * stage2/builtins.c (setup_func): Added ufs2 into the |
| STAGE1_5_MAP. |
| |
| * stage2/Makefile.am (libgrub_a_SOURCES): Added fsys_ufs2.c. |
| (libgrub_a_CFLAGS): Added -DFSYS_UFS2=1. |
| (pkgdata_DATA): Added ufs2_stage1_5. |
| (noinst_PROGRAMS): Added ufs2_stage1_5.exec. |
| (ufs2_stage1_5_exec_SOURCES): New variable. |
| (ufs2_stage1_5_exec_CFLAGS): Likewise. |
| (ufs2_stage1_5_exec_CCASFLAGS): Likewise. |
| (ufs2_stage1_5_exec_LDFLAGS): Likewise. |
| |
| * grub/Makefile.am (AM_CPPFLAGS): Added -DFSYS_ISO9660=1, |
| -DFSYS_JFS=1, -DFSYS_REISERFS=1, -DFSYS_UFS2=1, -DFSYS_VSTAFS=1, |
| -DFSYS_XFS=1, and -DUSE_MD5_PASSWORDS=1. |
| |
| * configure.ac (--disable-ufs2): New option. |
| |
| * stage2/fsys_ufs2.c: New file. |
| * stage2/ufs2.h: Likewise. |
| |
| 2004-05-10 Robert Millan <robertmh@gnu.org> |
| |
| * lib/device.c: Mangle __FreeBSD_* macro usage to support |
| kFreeBSD-based non-FreeBSD systems (i.e. GNU/kFreeBSD). |
| |
| Implement runtime detection of version of kFreeBSD. Now if |
| we build against kFreeBSD 5.x headers the GRUB shell will work on |
| both 4.x and 5.x. |
| |
| Replace `u_int_t' types with portable `unsigned int' and old |
| reference to `geometry' structure to new `geom' one. |
| |
| * docs/menu.lst: Split GNU/kFreeBSD and GNU/kNetBSD as separate |
| options than FreeBSD and NetBSD, respectively. There are minor |
| differences now (different paths). |
| |
| 2004-05-03 Pavel Roskin <proski@gnu.org> |
| |
| * stage2/char_io.c (convert_to_ascii): Remove "%b" support. |
| It's non-standard and is not used anymore. |
| (grub_printf): Likewise. |
| |
| 2004-04-29 Robert Millan <robertmh@gnu.org> |
| |
| From Yann Dirson <dirson@debian.org>: |
| * util/mkbimage: Misc syntax fixes. |
| |
| 2004-04-29 Jeroen Dekkers <jeroen@dekkers.cx> |
| |
| * stage2/char_io.c (grub_memcmp): Define for stage1.5 too. |
| |
| * stage2/fsys_iso9660.c (iso9660_mount): Use memcmp() instead of |
| __builtin_memcmp(). |
| (iso9660_dir): Likewise. |
| |
| 2004-04-26 Christian Jones <chjones@aleph0.com> |
| |
| * docs/grub.texi (Making a GRUB bootable CD-ROM): minor edits, |
| including a few compatibility notes and a change to |
| -boot-load-size 4 for the mkisofs command. |
| |
| 2004-04-22 Jeroen Dekkers <jeroen@dekkers.cx> |
| |
| * Makefile.am (AUTOMAKE_OPTIONS): Add "gnu". |
| * configure.ac: Update to work with automake 1.8, quote all |
| AC_DEFUN's correctly and provide descriptions for AC_DEFINE's. |
| * acinclude.m4: Likewise. |
| * acconfig.h: Removed. |
| |
| * stage1/Makefile.am (.exec): Use suffix rules instead of pattern |
| rules. |
| * stage2/Makefile.am (.exec): Likewise. |
| |
| 2004-04-18 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (Making a GRUB bootable CD-ROM): New section. |
| |
| * stage2/disk_io.c (set_device): Use CH instead of *DEVICE to |
| test the first character of DEVICE, because DEVICE is |
| incremented. |
| Reported by Bernhard Treutwein. |
| |
| 2004-04-15 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/fsys_tftp.c (buf_fill): Cast 1 to unsigned short |
| explicitly so that the constant doesn't extend unsigned short |
| to int automatically. |
| Reported by Eduard Guzovsky <eguzovsk@enterasys.com>. |
| |
| * docs/grub.texi (Invoking grub-md5-crypt): Fixed the chapter |
| name. |
| Reported by Martin Pool <mbp@sourcefrog.net>. |
| |
| 2004-04-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.ac (STAGE2_CFLAGS): Check if -fno-stack-protector is |
| supported by GCC. If yes, added the option. This is necessary |
| for OpenBSD, because the stack protector defines additional |
| symbols. Reported by uc.sheda <uc.sheda@laposte.net>. |
| |
| 2004-03-28 Pavel Roskin <proski@gnu.org> |
| |
| * stage2/boot.c: Imply --no-mem-option for Linux kernels with |
| protocol version 2.03 and above (Linux 2.4.18 and newer). |
| |
| 2004-03-27 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/char_io.c [!GRUB_UTIL] (memcpy): New function. It is |
| defined as an alias of grub_memmove. This is copied from GRUB 2. |
| |
| * stage2/disk_io.c (print_completions): Simplified conditionals |
| to make it easier to edit the file with Emacs. |
| Added support for (cd). |
| (set_device): Likewise. |
| |
| * stage2/common.c (init_bios_info): Check if BOOT_DRIVE is a |
| CDROM drive. If it is true, set CDROM_DRIVE to BOOT_DRIVE. |
| (cdrom_drive): New variable. |
| |
| From Leonid Lisovskiy <lly@pisem.net>: |
| * stage2/start_eltorito.S: New file. |
| |
| * stage2/stage2.c (run_menu): Use GRUB_INVALID_DRIVE instead of |
| 0xFF. |
| |
| * stage2/shared.h (STAGE2_ID_ISO9660_STAGE1_5): New macro. |
| [FSYS_ISO9660] (STAGE2_ID): Set to STAGE2_ID_ISO9660_STAGE1_5. |
| (struct geometry): Added a new member ``sector_size''. |
| (BIOSDISK_FLAG_CDROM): New macro. |
| (cdrom_drive): Declared. |
| |
| * stage2/fsys_iso9660.c: New file. |
| * stage2/iso9660.h: Likewise. |
| |
| * stage2/filesys.h (FSYS_ISO9660_NUM): New macro. |
| [FSYS_ISO9660] (iso9660_mount): Declared. |
| [FSYS_ISO9660] (iso9660_read): Likewise. |
| [FSYS_ISO9660] (iso9660_dir): Likewise. |
| (NUM_FSYS): Added FSYS_ISO9660_NUM. |
| |
| * stage2/disk_io.c (fsys_table) [FSYS_ISO9660]: Added iso9660. |
| (current_drive): Use GRUB_INVALID_DRIVE. |
| (log2): New function. |
| (rawread): Use BUF_GEOM.SECTOR_SIZE instead of SECTOR_SIZE. |
| Change the type of BUFADDR from int to char *. |
| Use a virtual track to make sure that one track fits in the |
| buffer. |
| (sane_partition): Allow CURRENT_DRIVE to be CDROM_DRIVE, because |
| a bios drive for a CD-ROM is often assigned to greater than |
| 0x88. |
| (set_device): Use GRUB_INVALID_DRIVE instead of 0xFF. |
| (setup_part): Likewise. |
| |
| * stage2/cmdline.c (init_cmdline): Use GRUB_INVALID_DRIVE. |
| |
| * stage2/builtins.c (install_func): Use GRUB_INVALID_DRIVE. |
| (setup_func): Added iso9660_stage1_5. |
| |
| * stage2/bios.c (biosdisk): Don't fall back to the CHS mode |
| if the drive is a CDROM. |
| (get_cdinfo): New function. |
| (get_diskinfo): Call get_cdinfo if the drive is greater than or |
| equal to 0x88 or the drive supports LBA. |
| Set the sector size to SECTOR_SIZE if it is not a CD-ROM. |
| |
| * stage2/asm.S (biosdisk_int13_extensions): Take a word |
| argument AX instead of a byte argument AH. |
| (get_diskinfo_int13_extensions): Removed. |
| |
| * stage2/Makefile.am (noinst_HEADERS): Added iso9660.h. |
| (libgrub_a_SOURCES): Added fsys_iso9660.c. |
| (libgrub_a_CFLAGS): Added -DFSYS_ISO9660=1. |
| (pkgdata_DATA): Added iso9660_stage1_5 and stage2_eltorito. |
| (noinst_PROGRAMS): Added iso9660_stage1_5.exec and |
| start_eltorito.exec. |
| (noinst_DATA): Added start_eltorito. |
| (pre_stage2_exec_SOURCES): Added fsys_iso9660.c. |
| (START_ELTORITO_LINK): New variable. |
| (start_eltorito_exec_SOURCES): Likewise. |
| (start_eltorito_exec_CCASFLAGS): Likewise. |
| (start_eltorito_exec_LDFLAGS): Likewise. |
| (start_eltorito_exec-start.$(OBJEXT)): New dependency. |
| (stage2_eltorito): New target. |
| (iso9660_stage1_5_exec_SOURCES): New variable. |
| (iso9660_stage1_5_exec_CFLAGS): Likewise. |
| (iso9660_stage1_5_exec_CCASFLAGS): Likewise. |
| (iso9660_stage1_5_exec_LDFLAGS): Likewise. |
| |
| * stage1/stage1.h (GRUB_INVALID_DRIVE): New macro. |
| |
| * stage1/stage1.S (boot_drive): Use the macro GRUB_INVALID_DRIVE. |
| (real_start): Likewise. |
| |
| * lib/device.c (get_drive_geometry): Set GEOM->SECTOR_SIZE to |
| SECTOR_SIZE by default. |
| |
| * configure.ac (--disable-iso9660): New option. |
| |
| 2004-03-13 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Daniele Zelante <zeldan@email.it>: |
| * stage2/asm.S (stop_floppy): Use INT 13, AH=00h to stop the |
| floppy controller instead of a direct I/O. |
| |
| 2004-03-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/serial.c (serial_putchar): Handle the character code |
| 127 as a backspace. Reported by Florian Engelhardt |
| <f.engelhardt@gmx.net>. |
| |
| 2004-03-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Boji Tony Kannanthanam <boji.t.kannanthanam@intel.com>: |
| * util/grub-install.in (convert): Add support for ATARAID |
| device names. |
| * lib/device.c (get_ataraid_disk_name) [__linux__]: New |
| function. |
| (init_device_map) [__linux__]: Probe ATARAID disks. |
| |
| * stage2/size_test (check): Don't use the local statement any |
| longer. It was unneeded actually. Reported by Paul Jarc. |
| |
| 2004-03-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Sergey Matveychuk <sem@ciam.ru>: |
| * lib/device.c (get_drive_geometry): Do not open the same device |
| more than once unnecessarily. |
| (get_drive_geometry) [__FreeBSD_version >= 500040]: Use new |
| ioctl methods. |
| (get_floppy_disk_name) [__FreeBSD__ >= 4]: Use /dev/fd%d rather |
| than /dev/rfd%d. |
| (get_ide_disk_name) [__FreeBSD__ >= 4]: Use /dev/ad%d rather |
| than /dev/rad%d. |
| (get_scsi_disk_name) [__FreeBSD__ >= 4]: Use /dev/da%d rather |
| than /dev/rda%d. |
| * grub/asmstub.c (get_diskinfo): Check if ERRNO is EPERM as |
| well. |
| |
| 2004-02-28 Jeroen Dekkers <jeroen@dekkers.cx> |
| |
| * docs/grub.texi (partnew): Change @var{to} to @var{len}. |
| |
| 2004-02-18 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Yury V. Umanets <umka@namesys.com>: |
| * stage2/fsys_reiserfs.c (REISER3FS_SUPER_MAGIC_STRING): New |
| macro. |
| (reiserfs_mount): Added checks for ReiserFS 3. |
| (reiserfs_embed): Likewise. |
| |
| 2004-01-25 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (Obtaining and Building GRUB): Instead of |
| describing how to use the anoncvs method, specify the URL of |
| the description page on Savannah. |
| Reported by Bernhard Treutwein. |
| |
| 2004-01-18 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Thomas Schwinge <kischde@gmx.net>: |
| * grub/Makefile.am (AM_CPPFLAGS): New variable. |
| (AM_CFLAGS): Removed all cpp flags. |
| |
| * stage2/xfs.h (__int8_t): Renamed to ... |
| (xfs_int8_t): ... this. |
| (__uint8_t): Renamed to ... |
| (xfs_uint8_t): ... this. |
| (__int16_t): Renamed to ... |
| (xfs_int16_t): ... this. |
| (__uint16_t): Renamed to ... |
| (xfs_uint16_t): ... this. |
| (__int32_t): Renamed to ... |
| (xfs_int32_t): ... this. |
| (__uint32_t): Renamed to ... |
| (xfs_uint32_t): ... this. |
| (__int64_t): Renamed to ... |
| (xfs_int64_t): ... this. |
| (__uint64_t): Renamed to ... |
| (xfs_uint64_t): ... this. |
| All callers are changed.x |
| |
| From Egmont Koblinger <egmont@uhulinux.hu>: |
| * util/grub-install.in: Support an install devices in GRUB's |
| notation without parentheses. |
| |
| * docs/grub.texi (Installing GRUB using grub-install): Added an |
| example of using grub-install without parentheses. |
| |
| 2004-01-18 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * util/grub-install.in: Use the first word of GRUB_SHELL when |
| checking if the grub shell is present. This is necessary to |
| support options to the grub shell (e.g. grub --read-only). |
| |
| From Eric Kvaalen <E_Kvaalen.Arnesen@noos.fr>: |
| * docs/grub.texi: Many bug fixes. |
| |
| 2004-01-17 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * lib/device.c [__linux__] (MAJOR): Support 32 bit and 64 bit |
| dev_t. This code is stolen from glibc. |
| Suggested by Shen Feng <shen@nanjing-fnst.com>. |
| |
| 2004-01-11 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/terminfo.c (ti_set_term): Use a pointer to struct |
| terminfo instead to avoid GCC's bug, which inserts a reference |
| to memcpy implicitly. |
| (ti_get_term): Likewise. |
| All callers are fixed. |
| |
| * stage2/terminfo.h (ti_set_term): Updated. |
| (ti_get_term): Likewise. |
| |
| * stage2/shared.h (struct linux_kernel_header): New member, |
| initrd_max_address. Defined in the boot protocol 2.03 or higher. |
| |
| * stage2/boot.c (load_initrd): If the boot protocol is greater |
| than or equal to 2.03, use the field ``initrd_max_address'' |
| instead of LINUX_INITRD_MAX_ADDRESS. |
| |
| 2003-12-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/fsys_ext2fs.c (ext2_is_fast_symlink): New function. |
| (ext2fs_dir): Use ext2_is_fast_symlink to check if the current |
| inode is a fast or slow symlink. This change was required |
| because Linux now uses acl seriously (i.e. incompatibility). |
| Reported by Chris PeBenito <pebenito@gentoo.org> and Seemant |
| Kulleen <seemant@gentoo.org> |
| |
| 2003-11-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * lib/device.c (read_device_map) (sho_warning): New internal |
| function. |
| (read_device_map): If DRIVE is greater than 8, emit a warning |
| and ignore the drive, rather than exiting abnormally. |
| Reported by Greg Newby <newby@arsc.edu>. |
| |
| 2003-10-19 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| Migrated to newer autotools. Also, don't install mkbimage |
| because its name is too general and it does not conform to the |
| GNU Coding Standards in some points. |
| |
| * util/Makefile.am (EXTRA_DIST): New variable. |
| (sbin_SCRIPTS): Removed mkbimage. |
| (noinst_SCRIPTS): Added mkbimage. |
| |
| * stage1/Makefile.am (AM_ASFLAGS): Renamed to ... |
| (AM_CCASFLAGS): ... this. |
| |
| * stage2/Makefile.am (pre_stage2_exec_ASFLAGS): Renamed to ... |
| (pre_stage2_exec_CCASFLAGS): ... this. |
| (start_exec_ASFLAGS): Renamed to ... |
| (start_exec_CCASFLAGS): ... this. |
| (e2fs_stage1_5_exec_ASFLAGS): Renamed to ... |
| (e2fs_stage1_5_exec_CCASFLAGS): ... this. |
| (fat_stage1_5_exec_ASFLAGS): Renamed to ... |
| (fat_stage1_5_exec_CCASFLAGS): ... this. |
| (ffs_stage1_5_exec_ASFLAGS): Renamed to ... |
| (ffs_stage1_5_exec_CCASFLAGS): ... this. |
| (minix_stage1_5_exec_ASFLAGS): Renamed to ... |
| (minix_stage1_5_exec_CCASFLAGS): ... this. |
| (reiserfs_stage1_5_exec_ASFLAGS): Renamed to ... |
| (reiserfs_stage1_5_exec_CCASFLAGS): ... this. |
| (vstafs_stage1_5_exec_ASFLAGS): Renamed to ... |
| (vstafs_stage1_5_exec_CCASFLAGS): ... this. |
| (jfs_stage1_5_exec_ASFLAGS): Renamed to ... |
| (jfs_stage1_5_exec_CCASFLAGS): ... this. |
| (xfs_stage1_5_exec_ASFLAGS): Renamed to ... |
| (xfs_stage1_5_exec_CCASFLAGS): ... this. |
| (diskless_exec_ASFLAGS): Renamed to ... |
| (diskless_exec_CCASFLAGS): ... this. |
| (nbloader_exec_ASFLAGS): Renamed to ... |
| (nbloader_exec_CCASFLAGS): ... this. |
| (pxeloader_exec_ASFLAGS): Renamed to ... |
| (pxeloader_exec_CCASFLAGS): ... this. |
| |
| * configure.in: Removed. |
| * configure.ac: New file. Mostly derived from configure.in. |
| |
| 2003-10-19 Yoshinori OKUJI <okuji@enbug.org> |
| |
| From KB Sriram <mail_kb@yahoo.com>: |
| * stage2/disk_io.c (set_device) [SUPPORT_NETBOOT]: Added support |
| for a completion of a network device. |
| (print_completions): Likewise. |
| |
| 2003-10-10 Robert Millan <robertmh@gnu.org> |
| |
| * config.guess: Update from official source (CVS). |
| * config.sub: Likewise. |
| |
| 2003-09-18 Robert Millan <robertmh@gnu.org> |
| |
| * docs/texinfo.tex: Update from ftp.gnu.org. |
| |
| 2003-09-05 KB Sriram <mail_kb@yahoo.com> |
| |
| * stage2/fsys_fat.c: Fix missdetection of ext2fs as fatfs. |
| |
| 2003-09-05 Robert Millan <robertmh@gnu.org> |
| |
| * docs/menu.lst (GNU/Linux): Add commented initrd command, which |
| is consistent with documentation. |
| |
| 2003-09-01 Robert Millan <robertmh@gnu.org> |
| |
| * docs/menu.lst: Add NetBSD, OpenBSD, GNU/KFreeBSD and |
| GNU/KNetBSD. |
| |
| 2003-08-13 Jason Thomas <jason@intology.com.au> |
| |
| * util/grub-install.in (resolve_symlink): New function to |
| resolve symlinks. |
| (find_device): Moved symlink code to new function. |
| Before we convert the install_device we attempt to resolve it if |
| its a symlink using the new function. |
| * util/mbchk.c (check_multiboot): The sense of an error message |
| was inverted. |
| Reported by Timothy Baldwin <T.E.Baldwin99@members.leeds.ac.uk>. |
| |
| 2003-08-12 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (read_tree_node): Fixed a typo; only |
| matters for very large fs when tree doesn't fit in cache. |
| (IH_KEY_OFFSET): Don't check for INFO->version. There are |
| actually old version file systems that use new version items. |
| (IH_KEY_ISTYPE): Likewise. |
| (reiserfs_dir): Likewise. |
| |
| 2003-08-09 Thierry Laronde <tlaronde@polynum.org> |
| |
| * util/mkbimage: New File. `mkbimage' depends on GRUB and |
| existed elsewhere. It is now part of GRUB so that people can |
| fix/contribute. |
| * util/Makefile.am (sbin_SCRIPTS): Added script `mkbimage' |
| |
| 2003-08-01 Jason Thomas <jason@intology.com.au> |
| |
| * util/grub-install.in: support --no-floppy |
| This allow users to specify the --no-floppy option which |
| is passed onto the grub shell, so it does not probe the floppy |
| drive. |
| Patch from kesha@diedas.soften.ktu.lt |
| |
| 2003-06-17 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (reiserfs_mount): Clear the node cache. |
| This fixes a problem where files from other partitions appear at |
| the wrong partition. Problem reported by Johan Regin. |
| |
| 2003-05-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (partnew): Fixed the inconsistency between the |
| implementation and the documentation. The last argument is the |
| length instead of the ending address. |
| Reported by Daniel Farrell <s2108287@student.rmit.edu.au>. |
| |
| 2003-03-19 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Adam Lackorzynski <adam@os.inf.tu-dresden.de>: |
| * stage2/shared.h (KEY_NPAGE): Changed to 0x5100. |
| (KEY_PPAGE): Changed to 0x4900. |
| |
| 2003-03-19 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/boot.c (load_image): Check if DATA_LEN plus SECTOR_SIZE |
| is less than or equal to MULTIBOOT_SEARCH, instead of if |
| DATA_LEN is less than or equal to MULTIBOOT_SEARCH. |
| Reported by Neelkanth Natu <neelnatu@yahoo.com>. |
| |
| 2003-03-10 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Andrew Walrond <andrew@walrond.org>: |
| * stage2/fsys_reiserfs.c (struct reiserfs_journal_header): |
| Remove an unnecessary ``long''. |
| |
| 2003-03-10 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Tilmann Bubeck: |
| * stage2/builtins.c [SUPPORT_SERIAL] (terminfo_func): Unescape |
| arguments before copying them, and escape sequences before |
| printing them. |
| * stage2/terminfo.h (TERMINFO_LEN): Changed to 40. |
| |
| 2003-02-20 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * util/grub-install.in (find_device): Fix the sed script. |
| |
| 2003-02-17 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * lib/device.c (check_device): If DEVICE is empty, just return |
| 1. |
| (get_scsi_disk_name) [__QNXNTO__]: Make NAME empty, because SCSI |
| disks are detected as IDE disks on QNX RTP. |
| |
| From Taketo Kabe <kabe@sra-tohoku.co.jp>: |
| * lib/device.c (get_ide_disk_name) [__QNXNTO__]: Set NAME to |
| "/dev/hdX". |
| (get_floppy_disk_name) [__QNXNTO__]: Set NAME to "/dev/fdX". |
| * stage2/mb_info.h (struct AddrRangeDesc): Specified with the |
| attribute packed. |
| * stage2/shared.h (struct mmar_desc): Likewise. |
| |
| 2003-01-29 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Ilguiz Latypov: |
| * configure.in: Fix a syntax error in a sed script. |
| * stage2/bios.c (get_diskinfo): PhoenixBIOS 4.0 Revision 6.0 |
| for ZF Micro might understand the greater buffer size for the |
| "get drive parameters" int 0x13 call in its own way. |
| Supposedly the BIOS assumes even bigger space is available and |
| thus corrupts the stack. This is why we specify the exactly |
| necessary size of 0x42 bytes. |
| |
| 2003-01-25 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Steven Dick <ssd.gnu@mmae.ucf.edu>: |
| * stage2/pc_slice.h (PC_SLICE_TYPE_DELL_UTIL): New macro. |
| (IS_PC_SLICE_TYPE_FAT): Recognize PC_SLIDE_TYPE_DELL_UTIL as |
| well. |
| |
| 2003-01-25 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Karsten Scheibler <karsten.scheibler@student.uni-halle.de>: |
| * stage2/terminfo.c (term): Don't use a C99-style initializer. |
| |
| 2003-01-16 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From H.J. Lu <hjl@gnu.org>: |
| * stage2/disk_io.c (part_start): Use unsigned long to support |
| large disks. |
| (part_length): Likewise. |
| * stage2/shared.h (part_start): Likewise. |
| (part_length): Likewise. |
| |
| 2003-01-05 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.in (CFLAGS): When the default CFLAGS is used, |
| eliminate -O2 and -g from CFLAGS, because Autoconf may |
| automatically set CFLAGS to them. |
| |
| 2003-01-02 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Jeremy Katz: |
| * configure.in: Support building on x86_64 with gcc -m32. |
| |
| 2003-01-02 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Jeremy Katz: |
| * stage2/fsys_ext2fs.c (ext2fs_dir): Initialize STR_CHK to shut |
| up GCC. |
| * stage2/fsys_minix.c (minix_dir): Likewise. |
| |
| 2002-12-21 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/asm.S (gateA20): First, try a BIOS call (INT 15H, |
| AX=2400/2401). Use the keyboard controller, only if that failed. |
| |
| 2002-12-11 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| Add a workaround for buggy BIOSes which don't pass boot drive |
| correctly. The idea is that GRUB forces the fixed disk flag |
| when booted from a hard disk. When BIOS loads GRUB directly, |
| the boot drive must be either of 0x00 and 0x80, so this should |
| work, if those BIOSes always pass zero to %dl. AFAIK, this |
| assumption is always correct. |
| |
| * stage2/builtins.c (install_func): Store the fixed disk flag of |
| the destination drive in BOOT_DRIVE_MASK in Stage 1. |
| |
| * stage1/stage1.h (STAGE1_BOOT_DRIVE_MASK): New macro. |
| |
| * stage1/stage1.S (boot_drive_mask): New variable. It is or'ed |
| to %dl. |
| |
| 2002-12-09 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/char_io.c (init_page): Change the software name from |
| "GRUB" to "GNU GRUB". This was inaccurate. Reported by Ciaran |
| O'Riordan <coriordan@compsoc.com>. |
| |
| 2002-12-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (embed_func): When checking if the disk can |
| store Stage 1.5, check every partition, if it isn't empty. |
| |
| 2002-12-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/stage2.c (print_entry): Put a right arrow, if the entry |
| is longer than 71 characters. Reported by Pavel Roskin. |
| |
| 2002-12-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/disk_io.c (set_device): If '(n' is given, add 'd' into |
| DEVICE. Reported by Pavel Roskin. |
| |
| 2002-12-03 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| Change the terminal structure a bit, to turn the cursor state |
| explicitly. Suggested by Pavel Roskin. |
| |
| * stage2/term.h (struct term_entry): Remove the member |
| `nocursor' and add `setcursor'. |
| [!STAGE1_5] (console_setcursor): New prototype. |
| [SUPPORT_HERCULES] (hercules_setcursor): Likewise. |
| [!STAGE1_5] (console_nocursor): Removed. |
| [SUPPORT_HERCULES] (hercules_nocursor): Likewise. |
| |
| * stage2/stage2.c (run_menu): Call setcursor instead of |
| nocursor. |
| Call setcursor with 1 before starting a boot entry. |
| |
| * stage2/shared.h (nocursor): Removed. |
| (setcursor): New prototype. |
| |
| * stage2/hercules.c (herc_cursor_state): New variable. |
| (herc_turn_cursor): Removed. |
| (hercules_nocursor): Likewise. |
| (hercules_setcursor): New function. |
| |
| * stage2/char_io.c (get_cmdline): Turn on the cursor at the |
| beginning, and restore it before returning. |
| (nocursor): Removed. |
| (setcursor): New function. |
| |
| * stage2/asm.S (console_cursor_state): New variable. |
| (console_cursor_shape): Likewise. |
| (console_setcursor): New function. |
| (console_nocursor): Removed. |
| |
| * grub/asmstub.c (console_setcursor): New function. |
| (hercules_setcursor): Likewise. |
| (console_nocursor): Removed. |
| (hercules_nocursor): Likewise. |
| |
| 2002-12-03 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (terminfo): Fix a misleading English sentence. |
| Reported by Pavel Roskin. |
| * stage2/builtins.c (builtin_terminfo): Likewise. |
| |
| 2002-12-01 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Alexander Langer <alex@big.endian.de>: |
| * stage2/freebsd.h (RB_GDB): New macro. |
| (RB_MUTE): Likewise. |
| (RB_MULTIPLE): Likewise. |
| |
| * stage2/boot.c (bsd_boot): Set the bits of RB_MULTIPLE, RB_GDB |
| and RB_MUTE when "-D", "-g" and "-m" are specified, |
| respectively. |
| |
| 2002-12-01 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (Reporting bugs): Specify the project page of |
| the BTS instead of the BTS itself. |
| |
| 2002-11-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/Makefile.am (man_MANS): Added grub-terminfo.8. |
| ($(srcdir)/grub_terminfo.8): New target. |
| * utils/grub-terminfo.in: New file. |
| * util/Makefile.am (sbin_SCRIPTS): Added grub-terminfo. |
| * configure.in (AC_OUTPUT): Added util/grub-terminfo. |
| |
| * docs/grub.texi (terminfo): New subsection. |
| (Invoking grub-terminfo): New chapter. |
| |
| From Tilmann Bubeck <t.bubeck@reinform.de>: |
| * stage2/Makefile.am (noinst_HEADERS): Added terminfo.h and |
| tparm.h. |
| (libgrub_a_SOURCES): Added terminfo.c and tparm.c. |
| (pre_stage2_exe_SOURCES): Likewise. |
| * stage2/terminfo.c: New file. |
| * stage2/terminfo.h: Likewise. |
| * stage2/tparm.c: Likewise. |
| * stage2/tparm.h: Likewise. |
| * stage2/stage2.c (get_line_from_config): Fix handling of |
| backslashes. |
| * stage2/char_io.c (grub_putstr): New function. |
| (grub_printf): Use grub_putstr. |
| (substring): Add const into both arguments. |
| * stage2/builtins.c [SUPPORT_SERIAL]: Include terminfo.h. |
| [SUPPORT_SERIAL] (terminfo_func): New function. |
| [SUPPORT_SERIAL] (builtin_terminfo): New variable. |
| (builtin_table) [SUPPORT_SERIAL]: Added a pointer to |
| BUILTIN_TERMINFO. |
| * stage2/serial.c (serial_gotoxy): Use ti_cursor_address. |
| (serial_cls): Use ti_clear_screen. |
| (serial_highlight): use ti_enter_standout_mode and |
| ti_exit_standout_mode. |
| |
| 2002-11-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/disk_io.c (rawread): Make sure that SECTOR is valid. |
| If not, set ERRNUM to ERR_GEOM and return zero. This check is |
| critical when a partition table is corrupted. |
| |
| 2002-11-28 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/asm.S (console_cls): Write spaces to the entire screen |
| instead of getting/setting the video mode, because this flickers |
| the screen and is quite annoying, if using a LCD. |
| |
| 2002-11-15 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (QNX): New subsection. Reported by |
| Marian-Nicolae V. ION <marian_ion@noos.fr>. |
| |
| 2002-10-28 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * grub/asmstub.c (console_translate_key): Deal with KEY_PPAGE |
| and KEY_NPAGE. |
| * stage2/serial.c (serial_translate_key_sequence): Added two new |
| codes for Page Up and Page Down. |
| * stage2/asm.S (translation_table): Added entries for KEY_PPAGE |
| and KEY_NPAGE. |
| * stage2/stage2.c (run_menu): Deal with Page Up and Page Down. |
| Also recognize the right key for the selection of a boot entry. |
| Suggested by Adam Lackorzynski <adam@os.inf.tu-dresden.de>. |
| |
| 2002-10-10 Jason Thomas <jason@topic.com.au> |
| |
| * stage2/builtins.c (setup_func): Added missing space to --force-lba |
| option. Reported by Kenneth Crudup <kenny@panix.com> |
| |
| 2002-10-06 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/asm.S (gateA20): Output a dummy command (0xff), as a |
| workaround for USB keyboard hanging problem. Suggested by |
| Hidetoshi Nishimaki <nishimaki@mxs.nes.nec.co.jp>. |
| |
| 2002-10-06 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.in (falign_loop_flag): New variable. Set to if GCC |
| supports `-falign-*'. If true, use `-falign-jumps', |
| `-falign-loops' and `-falign-functions' instead of |
| `-malign-jumps', `-malign-loops' and `-malign-functions', |
| because `-malign-*' are obsolete in GCC 3.x. Reported by Jeremy |
| Katz. |
| |
| 2002-09-13 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/serial.c (fill_input_buf): Take a new argument NOWAIT. |
| If NOWAIT is true, don't loop. |
| All callers are changed. |
| |
| 2002-09-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.in (--disable-serial): Fix a typo in the |
| description. |
| |
| 2002-08-20 Jason Thomas <jason@topic.com.au> |
| |
| Changed highlight state code for hercules, console and serial. |
| The state was 0 - normal or 1 - highlight. |
| The state is now defined using an enum called color_state. |
| |
| * stage2/term.h (color_state): New enum. |
| (COLOR_STATE_STANDARD): Standard color to use when not using |
| user defined. |
| (COLOR_STATE_NORMAL): User defined normal color. |
| (COLOR_STATE_HIGHLIGHT): User defined highlight color. |
| (console_highlight): Renamed to console_setcolorstate. |
| (serial_highlight): Renamed to serial_setcolorstate. |
| (hercules_highlight): Renamed to hercules_setcolorstate. |
| * stage2/hercules.c (herc_highlight_state): Removed. |
| (herc_standard_color): New variable. |
| (herc_color_state): Likewise. |
| (herc_highlight): Renamed to herc_setcolorstate. |
| (herc_setcolorstate): Added switch to handle new states. |
| * stage2/console.c (console_highlight_state): Removed. |
| (console_standard_color): New variable. |
| (console_color_state): Likewise. |
| (console_highlight): Renamed to console_setcolorstate. |
| (console_setcolorstate): Added switch to handle new states. |
| * stage2/serial.c (serial_highlight): Renamed to |
| serial_setcolorstate. |
| (serial_setcolorstate): Adjusted 'if' to suit new states. |
| * grub/asmstub.c (console_highlight): Renamed to |
| console_setcolorstate. |
| (console_setcolorstate): Adjusted 'if' to suit new states. |
| * stage2/stage2.c (print_entry): Set color states using new |
| states. |
| (print_border): Likewise. |
| * stage2/stage2.c (run_menu): Reverse if (!) to if () for |
| uniformitty. |
| |
| 2002-07-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/boot.c (load_image): Rewrite the Linux booting support |
| radically. Now it should work even on a machine having, say, |
| only 128KB, theoretically. Of course, GRUB itself doesn't work |
| on such a system, though. |
| (load_initrd): Initialize LH based on CUR_ADDR, because the |
| location becomes dynamic. |
| * stage2/shared.h (LINUX_MAX_SETUP_SECTS): Set to 64. |
| (LINUX_HEAP_END_OFFSET): Set to (0x9000 - 0x200). |
| (LINUX_STAGING_AREA): Removed. |
| (LINUX_SETUP): Likewise. |
| (LINUX_KERNEL): Likewise. |
| (LINUX_KERNEL_MAXLEN): Likewise. |
| (LINUX_SETUP_SEG): Likewise. |
| (LINUX_INIT_SEG): Likewise. |
| (LINUX_SETUP_STACK): Set to 0x9000. |
| (LINUX_BZIMAGE_ADDR): New macro. |
| (LINUX_ZIMAGE_ADDR): Likewise. |
| (LINUX_OLD_REAL_MODE_ADDR): Likewise. |
| (CL_MY_LOCATION): Removed. |
| (CL_MY_END_ADDR): Likewise. |
| (CL_BASE_ADDR): Likewise. |
| (CL_MAGIC): Renamed to ... |
| (LINUX_CL_MAGIC): ... this. |
| (LINUX_CL_OFFSET): New macro. |
| (LINUX_CL_END_OFFSET): Likewise. |
| (LINUX_SETUP_MOVE_SIZE): Likewise. |
| (struct linux_kernel_header): Change the type of the member |
| "cmd_line_ptr" to char *. |
| (linux_data_tmp_addr): Declared. |
| (linux_data_real_addr): Likewise. |
| * stage2/asm.S [!STAGE1_5] (linux_data_tmp_addr): New variable. |
| [!STAGE1_5] (linux_data_real_addr): Likewise. |
| [!STAGE1_5] (big_linux_boot): Copy the real mode part from |
| LINUX_DATA_TMP_ADDR to LINUX_DATA_REAL_ADDR. |
| * grub/asmstub.c (linux_data_tmp_addr): New variable. |
| (linux_data_real_addr): Likewise. |
| |
| 2002-07-09 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Mark Kettenis <kettenis@chello.nl>: |
| * stage2/boot.c (load_image): Recognize newer FreeBSD kernels. |
| * stage2/i386-elf.h (EI_OSABI): New macro. |
| (EI_ABIVERSION): Likewise. |
| (ELFOSABI_FREEBSD): Likewise. |
| (EI_PAD): Set to 9. |
| |
| 2002-07-06 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/shared.h (boot_part_offset): Removed. |
| |
| * stage2/disk_io.c (set_bootdev): Copy the partition information |
| here. Now this function can call rawread, so it can fail. |
| (boot_part_offset): Removed. |
| |
| * stage2/builtins.c (boot_func): Don't copy the partition |
| information here. |
| (real_root_func): Check ERRNUM after calling set_bootdev. |
| |
| 2002-07-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (Reporting bugs): Use the group name (i.e. |
| grub) instead of the group id (i.e. 68) for the URL of the BTS. |
| |
| 2002-07-03 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/serial.c [!GRUB_UTIL] (inb): Added a delay into this |
| function itself. |
| [!GRUB_UTIL] (outb): Likewise. |
| [!GRUB_UTIL] (serial_hw_put): Increase the timeout value, and |
| don't call serial_hw_delay explicitly any longer. |
| (fill_input_buf): Increase the maximum number of retries, reset |
| the counter to zero after getting a valid character, and don't |
| call serial_hw_delay explicitly any longer. |
| |
| 2002-07-03 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/serial.c [!GRUB_UTIL] (serial_hw_fetch): Fixed a typo. |
| Reported by Ilguiz Latypov. |
| |
| 2002-07-01 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * Makefile.am (AUTOMAKE_OPTIONS): New variable. Specify the |
| required Automake version explicitly. |
| |
| 2002-06-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c [SUPPORT_SERIAL || SUPPORT_HERCULES] |
| (terminal_func): Set CURRENT_TERM to each of selected terminals |
| before calling grub_printf, and restore CURRENT_TERM after it. |
| Reported by Ilguiz Latypov. |
| Prepend a carriage return to the prompting message, because it |
| is ugly that the same messages fulfill the whole screen. |
| |
| 2002-06-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/serial.c [!GRUB_UTIL] (serial_hw_fetch): Fixed the |
| conditional statement. Reported by Ilguiz Latypov. |
| |
| 2002-06-24 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * MAINTENANCE: New file. |
| |
| 2002-06-15 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/disk_io.c [SUPPORT_NETBOOT] (GRUB): Defined. |
| [SUPPORT_NETBOOT]: Include etherboot.h. |
| [!STAGE1_5] (print_completions) [SUPPORT_NETBOOT]: When |
| completing a disk name, if NETWORK_READY is true, add "nd" as a |
| completion. |
| |
| 2002-06-15 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/fsys_xfs.c (le32): Don't use bswap, but use xchgb and |
| roll, because 386 doesn't have bswap. Reported by Frode Vatvedt |
| Fjeld <frodef@acm.org>. |
| |
| 2002-06-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/main.c (ifconfig): If GW is specified, clear out the |
| ARP entry for the gateway. If SVR is specified, clear out the |
| ARP entry for the server. Reported by Uwe Dannowski |
| <ud3@ira.uka.de>. |
| |
| 2002-06-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * util/grub-md5-crypt.in: Prompt to retype a password, and check |
| if the passwords matches. Suggested by Matt Perry |
| <matt@primefactor.com>. |
| Also, don't use Perl any longer, because *BSD's sh and GNU |
| support ``read -r'', and GRUB doesn't support any other |
| operating system anyway. |
| |
| 2002-06-12 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| The terminal handling code is rewritten radically. |
| |
| * stage2/console.c: New file. |
| * stage2/term.h: Likewise. |
| |
| * stage2/Makefile.am (noinst_HEADERS): Added term.h. |
| (libgrub_a_SOURCES): Added serial.c. |
| (pre_stage2_exec_SOURCES): Added console.c. |
| |
| * stage2/asm.S (console_putchar): Rewritten from scratch. |
| [!STAGE1_5] (translation_table): New variable. |
| [!STAGE1_5] (translate_keycode): New function. |
| [!STAGE1_5] (console_getkey): Call translate_keycode. |
| [!STAGE1_5] (console_checkkey): Likewise. |
| [!STAGE1_5] (nocursor): Renamed to ... |
| [!STAGE1_5] (console_nocursor): ... this. |
| [!STAGE1_5] (console_set_attrib): Removed. |
| |
| * stage2/builtins.c: Include term.h. |
| (terminal): Removed. |
| (normal_color): Likewise. |
| (highlight_color): Likewise. |
| (cat_func): Display a question mark when a non-printable |
| character was read. |
| (terminal_func): Rewritten almost from scratch. |
| |
| * stage2/char_io.c: Include term.h. |
| [!STAGE1_5] (auto_fill): Removed. |
| [!STAGE1_5] (term_table): New variable. |
| [!STAGE1_5] (current_term): Likewise. |
| [!STAGE1_5] (real_get_cmdline): New function. The code was |
| stolen from the previous version of get_cmdline. |
| [!STAGE1_5] (get_cmdline): Rewritten from scratch. |
| [!STAGE1_5] (translate_keycode): Removed. |
| [!STAGE1_5] (getkey): Rewritten from scratch. |
| [!STAGE1_5] (checkkey): Likewise. |
| (grub_putchar): Likewise. |
| [!STAGE1_5] (gotoxy): Likewise. |
| [!STAGE1_5] (getxy): Likewise. |
| [!STAGE1_5] (cls): Likewise. |
| [!STAGE1_5] (nocursor): New function. |
| [SUPPORT_SERIAL] (serial_getxy): Removed. |
| [SUPPORT_SERIAL] (serial_gotoxy): Likewise. |
| [SUPPORT_SERIAL] (serial_cls): Likewise. |
| [SUPPORT_SERIAL] (serial_getxy): Likewise. |
| [!STAGE1_5] (set_attrib): Likewise. |
| |
| * stage2/cmdline.c (init_cmdline): Set COUNT_LINES to -1. |
| |
| * stage2/common.c [!STAGE1_5] (err_list): Removed |
| ERR_NEED_SERIAL and added ERR_DEV_NEED_INIT. |
| |
| * stage2/hercules.c: Rewritten almost from scratch. |
| * stage2/hercules.h (herc_putchar): Removed. |
| (herc_cls): Likewise. |
| (herc_getxy): Likewise. |
| (herc_gotoxy): Likewise. |
| (herc_set_attrib): Likewise. |
| |
| * stage2/serial.c: Rewritten almost from scratch. |
| * stage2/serial.h: Likewise. |
| |
| * stage2/shared.h [GRUB_UTIL] (DISP_UL): Set to the same value |
| as VGA's. |
| [GRUB_UTIL] (DISP_UR): Likewise. |
| [GRUB_UTIL] (DISP_LL): Likewise. |
| [GRUB_UTIL] (DISP_LR): Likewise. |
| [GRUB_UTIL] (DISP_HORIZ): Likewise. |
| [GRUB_UTIL] (DISP_VERT): Likewise. |
| [GRUB_UTIL] (DISP_LEFT): Likewise. |
| [GRUB_UTIL] (DISP_RIGHT): Likewise. |
| [GRUB_UTIL] (DISP_UP): Likewise. |
| [GRUB_UTIL] (DISP_DOWN): Likewise. |
| (grub_error_t): Removed ERR_NEED_SERIAL. |
| Added ERR_DEV_NEED_INIT. |
| (normal_color): Removed. |
| (highlight_color): Likewise. |
| (console_cls): Removed, because this is declared in term.h. |
| (console_getxy): Likewise. |
| (console_gotoxy): Likewise. |
| (console_putchar): Likewise. |
| (console_getkey): Likewise. |
| (console_checkkey): Likewise. |
| (console_set_attrib): Removed. |
| (set_attrib): Likewise. |
| [GRUB_UTIL] (nocursor): Declared. |
| (auto_fill): Removed. |
| (terminal): Likewise. |
| (TERMINAL_CONSOLE): Likewise. |
| (TERMINAL_SERIAL): Likewise. |
| (TERMINAL_HERCULES): Likewise. |
| (TERMINAL_DUMB): Likewise. |
| (translate_keycode): Likewise. |
| |
| * stage2/stage2.c: Include term.h. |
| (print_entry): Rewritten from scratch. |
| (print_entries): Likewise. |
| (print_border): Likewise. |
| (set_line): Removed. |
| (set_line_normal): Likewise. |
| (set_line_highlight): Likewise. |
| |
| * grub/Makefile.am (AM_CFLAGS): Added -DSUPPORT_HERCULES=1. |
| |
| * grub/asmstub.c: Don't include hercules.h. Include term.h. |
| (console_current_color): New variable. |
| (console_translate_key): New function. |
| (console_checkkey): Rewritten from scratch. |
| (console_getkey): Likewise. |
| (console_putchar): Likewise. |
| (console_set_attrib): Removed. |
| (console_highlight): New function. |
| (console_setcolor): Likewise. |
| (console_nocursor): Likewise. |
| (serial_getkey): Removed. |
| (serial_checkkey): Likewise. |
| (serial_putchar): Likewise. |
| (serial_exists): Likewise. |
| (serial_get_port): Likewise. |
| (serial_init): Likewise. |
| (serial_hw_fetch): New function. |
| (serial_hw_put): Likewise. |
| (serial_hw_delay): Likewise. |
| (serial_hw_get_port): Likewise. |
| (serial_hw_init): Likewise. |
| (set_serial_device): Renamed to ... |
| (serial_set_device): ... this. |
| (herc_putchar): Renamed to ... |
| (hercules_putchar): ... this. |
| (herc_cls): Renamed to ... |
| (hercules_cls): ... this. |
| (herc_getxy): Renamed to ... |
| (hercules_getxy): ... this. |
| (herc_gotoxy): Renamed to ... |
| (hercules_gotoxy): ... this. |
| (hercules_highlight): New function. |
| (hercules_setcolor): Likewise. |
| (hercules_nocursor): Likewise. |
| (herc_set_attrib): Removed. |
| |
| * grub/main.c: Include term.h. |
| (main): If USE_CURSES is false, set CURRENT_TERM->FLAGS to |
| TERM_NO_EDIT | TERM_DUMB. TERMINAL is not used any longer. |
| |
| 2002-06-01 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (FAQ): Removed. See the GNU GRUB FAQ on the web |
| instead. |
| |
| 2002-05-31 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (Reporting bugs): Recommend using the BTS on |
| Savannah rather than the list bug-grub. |
| |
| 2002-05-25 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (boot_func): Load the boot partition |
| information, only if the address of the boot partition entry is |
| set appropriately. |
| (real_root_func): If ATTEMPT_MOUNT is false, call open_partition |
| and if successful, call set_bootdev, to set the offset of the |
| boot partition and the address of the boot paetition entry. |
| IF ATTEMPT_MOUNT is false, don't set BOOTDEV. The BSD evil hack |
| is useless with the command "rootnoverify" anyway. |
| * stage2/disk_io.c (boot_part_addr): Initialized with zero |
| explicitly, to emphasize that it is invalid. |
| |
| 2002-05-24 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (real_root_func): New function. |
| (root_func): Just call real_root_func. |
| (rootnoverify_func): Likewise. |
| |
| 2002-05-23 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * configure.in (AM_INIT_AUTOMAKE): Changed the version number to |
| 0.93. |
| |
| 2002-05-23 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| Define the behavior of the boot loader when the load end address |
| and the bss end address are zero in the Multiboot Specification, |
| and add the support into GRUB. I've modified a patch from Yuri |
| Zaporogets <yuriz@ukr.net>. |
| |
| * stage2/boot.c (load_image): In the case of Multiboot a.out |
| kludge, set the load end address to the load address plus the |
| size of the OS image file, if it is zero. Similarly, set the bss |
| end address to the load end address, if it is zero. |
| |
| * util/mbchk.c (check_multiboot): Don't check if the load |
| address is greater than or equal to the load end address, if the |
| load end address is zero. Don't check if the load end address is |
| greater than the bss end address, if the bss end address is |
| zero. And, don't check if the load end address is less than or |
| equal to the entry address, if the load end address is zero. |
| |
| * docs/multiboot.texi (The address fields of Multiboot header): |
| Added descriptions about the behavior of the boot loader when |
| LOAD_END_ADDR is zero and BSS_END_ADDR is zero. |
| |
| 2002-05-22 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (boot_func): If DEBUG is true, print |
| BOOT_DRIVE and BOOT_PART_OFFSET. |
| Don't set ERRNUM after rawread failed, because rawread should |
| set ERRNUM itself. |
| |
| 2002-05-20 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * lib/device.c (read_device_map): Show an error message and exit |
| abnormally, if MAP[DRIVE] has already been filled. |
| * util/grub-install.in: If there is any dulicated entry, print |
| an error message and exit abnormally. |
| |
| 2002-05-20 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * lib/device.c: Don't include linux/hdreg.h, linux/major.h, |
| or linux/kdev_t.h. |
| [__linux__] (HDIO_GETGEO): Defined. |
| [__linux__] (hd_geometry): Likewise. |
| [__linux__] (FLOPPY_MAJOR): Likewise. |
| [__linux__] (MINORBITS): Likewise. |
| [__linux__] (MAJOR): Likewise. |
| |
| 2002-05-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/fsys_tftp.c (tftp_read): Don't call buf_fill unless |
| SIZE is positive. |
| |
| 2002-05-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/etherboot.h (ETH_MAX_MTU): Because some DHCP/BOOTP |
| servers don't treat the maximum length the same as Etherboot, |
| subtract the size of an IP header and that of an UDP header. |
| |
| 2002-04-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| From Jean-Jacques Michel <jjmichel@linbox.com>: |
| * stage2/boot.c (load_image): For Linux, check if DATA_LEN is |
| greater than MULTIBOOT_SEARCH. If that's true, read the rest |
| after copying data already read in BUFFER. |
| |
| 2002-04-30 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/boot.c (load_image): For Linux, don't check if the |
| length of protected mode code is greater than or equal to the |
| expected length minus 16. Instead, just check if no error |
| occurred. That was problematic, because memdisk has no protected |
| mode code. Also, I don't see what the magic number 16 was for. |
| |
| 2002-04-29 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c [SUPPORT_SERIAL] (terminal_func): Added a |
| new option ``--silent''. This suppresses messages, if specified. |
| |
| 2002-04-29 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * config.guess: New upstream version. |
| * config.sub: Likewise. |
| |
| 2002-04-20 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/config.c (PCI_NIC) [INCLUDE_DAVICOM]: Fix typos. |
| Reported by Julien Perrot <julien.perrot@iie.cnam.fr>. |
| |
| 2002-04-17 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c [SUPPORT_SERIAL] (terminal_func): Set |
| COUNT_LINES to -1, to disable the pager. |
| |
| 2002-04-16 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (Obtaining and Building GRUB): Update the link |
| to the binutils site. |
| |
| 2002-04-06 Pavel Roskin <proski@gnu.org> |
| |
| * util/grub-install.in: Fix hardcoded /dev/hda1. |
| |
| 2002-04-06 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c [GRUB_UTIL] (dump_func): New function. |
| [GRUB_UTIL] (builtin_dump): New variable. |
| (builtin_table) [GRUB_UTIL]: Added a pointer to BUILTIN_DUMP. |
| * util/grub-install.in: Make sure that GRUB reads the same |
| images as the host operating system by comparing the result of |
| running the command "dump" with the contents of the OS file. |
| |
| 2002-04-04 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (setup_func): Don't embed a drive number, if |
| unnecessary. |
| |
| 2002-03-29 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * docs/grub.texi (General commands): Added ``pager'' into the |
| menu. |
| (pager): New subsection. |
| (terminal): Added a description about the option |
| ``--lines=LINES''. |
| |
| * configure.in (AC_INIT_AUTOMAKE): Set the version number to |
| 0.92. |
| |
| 2002-03-26 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/eepro100.c (eepro100_probe): Increase the delay at the |
| initialization. |
| |
| 2002-03-26 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/boot.c (linux_mem_size): New variable. |
| (load_image): Check a mem= option and set LINUX_MEM_SIZE to the |
| specified memory size, if any. Otherwise, to zero. When an |
| overflow is detected, use LINUX_INITRD_MAX_ADDRESS instead. |
| (load_initrd): If LINUX_MEM_SIZE is non-zero, use it instead of |
| the actual memory size. |
| * stage2/char_io.c (safe_parse_maxint): Use ERR_NUMBER_OVERFLOW |
| instead of ERR_NUMBER_PARSING, when an overflow occurs. |
| * stage2/common.c [!STAGE1_5] (err_list): Added |
| ERR_NUMBER_OVERFLOW. |
| * stage2/shared.h (ERR_NUMBER_OVERFLOW): New constant. |
| |
| 2002-03-24 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/stage2.c (run_menu): Call cls outside the loop to run |
| scripts. |
| * stage2/cmdline.c (run_script): Prompt a user's intervention, |
| only when FALLBACK_ENTRY is negative. |
| |
| 2002-02-11 Pavel Roskin <proski@gnu.org> |
| |
| * util/grub-install.in (find_device): New function - find block |
| device for given file or directory. Resolve symlinks to fix |
| problem on Linux with devfs and old device names in /etc/fstab. |
| Use find_device() for root_device, bootdir_device and |
| grubdir_device. |
| |
| 2002-02-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * grub/main.c (OPT_NO_PAGER): New macro. |
| (longopts): Added an entry for "--no-pager". |
| (usage): Added a description about "--no-pager". |
| (main): In case of OPT_NO_PAGER, set USE_PAGER to zero. The same |
| thing is done with OPT_BATCH, because the pager is just harmful |
| in batch mode. |
| |
| 2002-02-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (help_func): Show all the commands runnable |
| with the command-line interface, if "--all" is specified. |
| |
| 2002-02-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| An internal pager is implemented. |
| |
| * stage2/builtins.c (pager_func): New function. |
| (builtin_pager): New variable. |
| (terminal_func): New option, "--lines=LINES" is added. If this |
| option is specified, set MAX_LINES to the value. Otherwise, set |
| MAX_LINES to 24. |
| (vbeprobe_func): Remove the pager code specific to this |
| function. |
| (builtin_table): Added a pointer to BUILTIN_PAGER. |
| * stage2/char_io.c (max_lines) [!STAGE1_5]: New variable. |
| (count_lines) [!STAGE1_5]: Likewise. |
| (use_pager) [!STAGE1_5]: Likewise. |
| (grub_putchar) [!STAGE1_5]: if C is a newline and COUNT_LINES is |
| not -1, count up the number of lines. If it exceeds the maximum |
| number of lines minus 2, show a message and wait for input of |
| return key. "minus 2" is to reserve space for the message |
| printed by this internal pager. |
| * stage2/cmdline.c (enter_cmdline): If USE_PAGER is true, set |
| COUNT_LINES to zero, before running a command, and reset |
| COUNT_LINES to -1 after that. |
| * stage2/shared.h (max_lines) [!STAGE1_5]: Declared. |
| (count_lines) [!STAGE1_5]: Likewise. |
| (use_pager) [!STAGE1_5]: Likewise. |
| |
| 2002-02-08 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/fsys_jfs.c (jfs_read) [STAGE1_5]: Set and reset |
| DISK_READ_FUNC even in Stage 1.5. |
| * stage2/fsys_xfs.c (xfs_read) [STAGE1_5]: Likewise. |
| |
| * stage2/stage1_5.c (saved_sector): Initialized with -1. |
| (cmain): Check if SAVED_SECTOR was set appropriately after |
| reading the second sector of Stage 2. If SAVED_SECTOR is not |
| set (i.e. it is equal to -1), print an error and stop. |
| |
| 2002-02-05 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (setup_func): Add a VSTa fs entry into |
| STAGE1_5_MAP. |
| |
| 2002-02-05 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/shared.h (BUILTIN_HELP_LIST): New macro. Used for |
| commands whose help messages are listed when no argument is |
| specified to the command "help". |
| * stage2/builtins.c (builtin_blocklist): Added the attribute |
| BUILTIN_HELP_LIST. |
| (builtin_boot): Likewise. |
| (builtin_bootp): Likewise. |
| (builtin_cat): Likewise. |
| (builtin_chainloader): Likewise. |
| (builtin_color): Likewise. |
| (builtin_configfile): Likewise. |
| (builtin_device): Likewise. |
| (builtin_dhcp): Likewise. |
| (builtin_displayapm): Likewise. |
| (builtin_displaymem): Likewise. |
| (builtin_find): Likewise. |
| (builtin_geometry): Likewise. |
| (builtin_halt): Likewise. |
| (builtin_help): Likewise. |
| (builtin_hide): Likewise. |
| (builtin_ifconfig): Likewise. |
| (builtin_initrd): Likewise. |
| (builtin_kernel): Likewise. |
| (builtin_makeactive): Likewise. |
| (builtin_map): Likewise. |
| (builtin_md5crypt): Likewise. |
| (builtin_module): Likewise. |
| (builtin_modulenounzip): Likewise. |
| (builtin_partnew): Likewise. |
| (builtin_parttype): Likewise. |
| (builtin_quit): Likewise. |
| (builtin_rarp): Likewise. |
| (builtin_reboot): Likewise. |
| (builtin_root): Likewise. |
| (builtin_rootnoverify): Likewise. |
| (builtin_serial): Likewise. |
| (builtin_setkey): Likewise. |
| (builtin_setup): Likewise. |
| (builtin_terminal): Likewise. |
| (builtin_testvbe): Likewise. |
| (builtin_tftpserver): Likewise. |
| (builtin_unhide): Likewise. |
| (builtin_uppermem): Likewise. |
| (builtin_vbeprobe): Likewise. |
| |
| (help_func): When no argument is specified, if the last entry |
| was at the left column, print an extra newline. |
| |
| 2002-02-05 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/shared.h (BUILTIN_HIDDEN): Renamed to ... |
| (BUILTIN_NO_ECHO): ... this. The old name was too difficult to |
| see _what_ was hidden. |
| |
| 2002-02-05 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * netboot/misc.c (twiddle): Go back to the bar progress, copied |
| from etherboot-5.0.5/src/misc.c. Execute the code only if DEBUG |
| is true. |
| |
| 2002-02-05 Yoshinori K. Okuji <okuji@enbug.org> |
| |
| * stage2/builtins.c (displaymem_func): Use hex digits to display |
| for consistency. |
| |
| 2002-02-04 Jason Thomas <jason@topic.com.ah> |
| |
| From Denis Kitzman <dkitzman@blue.weeg.uiowa.edu>: |
| * stage2/Makefile.am (libgrub_a_CFLAGS): Fixed a typo. |
| FSYS_XFS, USE_MD5_PASSWORDS, SUPPORT_SERIAL, and |
| SUPPORT_HERCULES did not get defined. |
| |
| 2002-01-20 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * util/grub-image.in: Check stage2 instead of stage2.c to |
| determine where the script is invoked, because srcdir may not |
| be used for the compilation. |
| |
| 2002-01-20 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * grub/asmstub.c (console_putchar): When not using curses, |
| ignore a carriage return, because a newline in Unix is only a |
| line feed. |
| |
| 2002-01-18 Klaus Reichl <Klaus.Reichl@alcatel.at> |
| |
| * stage2/fsys_minix.c (minix_dir): Fixed bug getting filenames |
| with MAXNAMELEN right. |
| |
| * stage2/char_io.c (get_cmdline, cl_refresh): If TERMINAL_DUMB |
| section is always 0. |
| Line is only cleared if !TERMINAL_DUMB. |
| |
| * grub/main.c (use_curses): Initialize to 0 if !HAVE_LIBCURSES |
| (main): Check for curses use and set terminal to dumb if we |
| don't use it (helps for --batch and variants of non-curses |
| setup). |
| |
| 2002-01-15 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * configure.in (AM_INIT_AUTOMAKE): The version number is |
| upgraded to 0.91. |
| |
| 2002-01-15 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * docs/grub.texi (Preset Menu): New chapter. |
| |
| 2002-01-15 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * docs/grub.texi: Added some text about JFS and XFS. |
| |
| 2002-01-08 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * grub/main.c (use_preset_menu): New variable. |
| (OPT_PRESET_MENU): New macro. |
| (longopts): Added an entry for "--preset-menu". |
| (usage): Added a description for "--preset-menu". Also, change |
| the first character of the description for "--device-map" to |
| lower case for consistency. |
| (main): Set USE_PRESET_MENU to 1 in the case of OPT_PRESET_MENU. |
| * stage2/shared.h (use_preset_menu): Declared. |
| * stage2/stage2.c [PRESET_MENU_STRING || SUPPORT_DISKLESS] |
| (open_preset_menu) [GRUB_UTIL]: If USE_PRESET_MENU is false, |
| return zero immediately. |
| |
| 2002-01-08 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/common.c [SUPPORT_DISKLESS] |
| (setup_diskless_environment): Removed. The feature is moved to |
| the preset menu. |
| * stage2/stage2.c [SUPPORT_DISKLESS] (preset_menu): Set to the |
| string "bootp\n". |
| [SUPPORT_DISKLESS] (preset_menu_offset): Defined, as if |
| PRESET_MENU_STRING is defined. |
| [SUPPORT_DISKLESS] (open_preset_menu): Likewise. |
| [SUPPORT_DISKLESS] (read_from_preset_menu): Likewise. |
| [SUPPORT_DISKLESS] (close_preset_menu): Likewise. |
| |
| 2002-01-06 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| The preset menu has a priority over the configuration file. |
| Suggested by Christoph Plattner. |
| |
| * stage2/stage2.c [PRESET_MENU_STRING] (open_preset_menu): |
| Check if PRESET_MENU is not NULL. |
| [PRESET_MENU_STRING] (close_preset_menu): Set PRESET_MENU to |
| NULL. |
| (cmain): New internal function, reset. This function resets |
| AUTO_FILL, CONFIG_LEN, MENU_LEN, NUM_ENTRIES, CONFIG_ENTRIES, |
| MENU_ENTRIES and call init_config. |
| Try to open the preset menu first, and try to open the |
| configuration file, only if that failed. |
| Even if the preset menu was read, try to open the configuration |
| file. This time, opening the preset menu never succeed, because |
| close_preset_menu ensures that the preset menu is available at |
| most once. |
| |
| 2002-01-06 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * netboot/misc.c (inet_aton): Don't check if *P is an asterisk, |
| if I is 3. Reported by Rick (his real name and address are |
| unknown). |
| |
| 2002-01-03 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| Update the netboot stuff to Etherboot-5.0.5. |
| |
| * configure.in (--enable-3c590): Removed. This was a mistake. |
| (--enable-davicom): New option. |
| (--enable-eepro): Likewise. |
| (--enable-natsemi): Likewise. |
| (--enable-ni5010): Likewise. |
| (--enable-sis900): Likewise. |
| (--enable-w89c840): Likewise. |
| (--enable-3c509-hack): Removed. |
| (--enable-ns8390-force-16bit): Likewise. |
| |
| * netboot/Makefile.am (libdrivers_a_SOURCES): Added timer.c and |
| timer.h. |
| (EXTRA_libdrivers_a_SOURCES): Added davicom.c, eepro.c, fa311.c, |
| natsemi.c, ni5010.c, sis900.c, sis900.h, tlan.c and w89c840.c. |
| (EXTRA_DIST): Added sis900.txt. |
| (3c595_drivers): Remove 3c590.o from this. |
| (davicom_drivers): New variable. |
| (eepro_drivers): Likewise. |
| (natsemi_drivers): Likewise. |
| (ni5010_drivers): Likewise. |
| (sis900_drivers): Likewise. |
| (w89c840_drivers): Likewise. |
| (3c590_o_CFLAGS): Removed. |
| (davicom_o_CFLAGS): New variable. |
| (eepro_o_CFLAGS): Likewise. |
| (natsemi_o_CFLAGS): Likewise. |
| (ni5010_o_CFLAGS): Likewise. |
| (sis900_o_CFLAGS): Likewise. |
| (w89c840_o_CFLAGS): Likewise. |
| |
| * netboot/davicom.c: New file, from Etherboot-5.0.5. |
| * netboot/eepro.c: Likewise. |
| * netboot/natsemi.c: Likewise. |
| * netboot/ni5010.c: Likewise. |
| * netboot/sis900.c: Likewise. |
| * netboot/sis900.h: Likewise. |
| * netboot/sis900.txt: Likewise. |
| * netboot/timer.c: Likewise. |
| * netboot/timer.h: Likewise. |
| * netboot/w89c840.c: Likewise. |
| * netboot/fa311.c: Likewise. |
| * netboot/tlan.c: Likewise. |
| |
| * netboot/3c509.c: Copied from Etherboot-5.0.5. |
| * netboot/3c509.h: Likewise. |
| * netboot/3c595.c: Likewise. |
| * netboot/3c90x.c: Likewise. |
| * netboot/3c90x.txt: Likewise. |
| * netboot/cards.h: Likewise. |
| * netboot/cs89x0.c: Likewise. |
| * netboot/depca.c: Likewise. |
| * netboot/eepro100.c: Likewise. |
| * netboot/epic100.c: Likewise. |
| * netboot/i82586.c: Likewise. |
| * netboot/lance.c: Likewise. |
| * netboot/linux-asm-string.h: Likewise. |
| * netboot/nic.h: Likewise. |
| * netboot/ns8390.c: Likewise. |
| * netboot/ns8390.h: Likewise. |
| * netboot/otulip.c: Likewise. |
| * netboot/pci.h: Likewise. |
| * netboot/rtl8139.c: Likewise. |
| * netboot/sk_g16.c: Likewise. |
| * netboot/smc9000.c: Likewise. |
| * netboot/tiara.c: Likewise. |
| * netboot/tulip.c: Likewise. |
| * netboot/via-rhine.c: Likewise. |
| |
| * netboot/config.c: Applied a diff between Etherboot-4.6.4 and |
| Etherboot-5.0.5 manually. |
| * netboot/main.c: Likewise. |
| * netboot/pci.c: Likewise. |
| * netboot/etherboot.h: Rewritten mostly from scratch, based on |
| the same file in Etherboot-5.0.5. |
| * netboot/misc.c: Likewise. |
| * netboot/osdep.h: Likewise. |
| * netboot/fsys_tftp.c (GRUB): Defined. |
| (buf_fill): Use rfc2131_sleep_interval instead of rfc951_sleep. |
| |
| * stage2/builtins.c [SUPPORT_NETBOOT] (GRUB): Defined. |
| (boot_func) [SUPPORT_NETBOOT]: Call cleanup_net. |
| * stage2/cmdline.c [SUPPORT_DISKLESS] (GRUB): Defined. |
| * stage2/common.c [SUPPORT_DISKLESS] (GRUB): Likewise. |
| |
| 2002-01-02 Jeremy Katz <katzj@redhat.com> |
| |
| * util/grub-install.in: Support using mktemp as well as tempfile |
| for secure temporary file creation. |
| |
| 2002-01-02 Jeremy Katz <katzj@redhat.com> |
| |
| * stage2/md5.c (md5_password): Ensure the password exists before |
| trying to check against the md5 crypted version. |
| |
| 2001-12-30 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage1/stage1.S: Don't call INT 13, AH=48H, because it is |
| difficult to call this function with the workaround implemented |
| in the previous change due to the size limit of Stage 1. |
| |
| (lba_mode) [NO_BUGGY_BIOS_IN_THE_WORLD]: Don't check the |
| geometry explicitly. This shouldn't be harmful, as INT 13, |
| AH=42H should take care of it, and if you cannot read Stage 2 |
| even with LBA because of a geometry problem, you can never read |
| it. |
| |
| * stage2/start.S (lba_mode) [NO_BUGGY_BIOS_IN_THE_WORLD]: |
| Likewise. |
| |
| 2001-12-30 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/bios.c (get_diskinfo): Clear out the structure DRP |
| before calling get_diskinfo_int13_extensions, because the Ralf |
| Brown's Interrupt List says that Dell machines using PhoenixBIOS |
| 4.0 Release 6.0 fail, if DRP.FLAGS is not zero. Setting the |
| entire structure to zero may be overkill, but it should be safe. |
| |
| * stage2/char_io.c [STAGE1_5] (grub_memset): Defined. |
| |
| 2001-12-30 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| From John Goerzen <jgoerzen@complete.org>: |
| * util/grub-install.in (convert): Added NetBSD support. |
| |
| 2001-12-30 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * util/grub-install.in: Set GRUB_PREFIX and BOOTDIR to "/grub" |
| and "${rootdir}" respectively in NetBSD. |
| |
| 2001-12-30 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/builtins.c (builtin_geometry): Add extra space |
| characters into the long description. |
| (builtin_kernel): Likewise. |
| (builtin_vbeprobe): Likewise. |
| |
| 2001-12-19 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| From Michael Sullivan <mike@trdlnk.com>: |
| * stage1/stage1.S (real_start): Added a workaround for AST BIOS, |
| because it clobbers %dl with INT 13, AH=41H. |
| |
| 2001-12-19 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/fsys_fat.c (fat_read): Fix the contradictory comment. |
| Reported by Filip Van Raemdonck <mechanix@digibel.org>. |
| |
| 2001-12-11 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/builtins.c (displayapm_func): Don't use multi-line |
| string literals but string concatenation instead, to suppress |
| warnings from gcc-3.0.x. |
| * stage2/cmdline.c (print_cmdline_message): Likewise. |
| * util/mbchk.c (usage): Likewise. |
| |
| * stage2/smp-imps.c (imps_read_config_table): Add a break |
| statement after the label ``default''. |
| |
| * util/mbchk.c: Include <stdlib.h> for the prototype of exit. |
| |
| * stage2/serial.c (serial_port): Initialize with 0 instead of |
| -1, as an invalid value, because SERIAL_PORT is unsigned. This |
| change shouldn't affect anything. |
| (serial_exists): For the above change, check SERIAL_PORT with 0 |
| instead of -1. |
| |
| 2001-12-10 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/shared.h (ERR_NO_DISK_SPACE): New constant. |
| * stage2/common.c (err_list): Added an entry for |
| ERR_NO_DISK_SPACE. |
| * docs/grub.texi (Stage2 errors): Added the description. |
| * stage2/builtins.c (embed_func): Use ERR_NO_DISK_SPACE instead |
| of ERR_DEV_VALUES when the spare space is too small. Suggested |
| by Eric Mumpower <nocturne@permabit.com>. |
| |
| 2001-12-10 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * grub/asmstub.c: Include <signal.h>. |
| (grub_stage2) [HAVE_LIBCURSES]: If USE_CURSES is true, ignore |
| the signal SIGWINCH. Reported by Christian Hudon |
| <chrish@debian.org>. |
| |
| 2001-11-29 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| From Jason Thomas: |
| * stage2/disk_io.c (set_partition_hidden_flag): Complete rewrite |
| of this function which now supports logical partitions. |
| |
| 2001-11-12 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * docs/grub.texi: The copyright of this file is only held by |
| Free Software Foundation, Inc., as Erich Boleyn has assigned his |
| copyright to the FSF. |
| * stage1/stage1.S: Likewise. |
| * stage2/asm.S: Likewise. |
| * stage2/boot.c: Likewise. |
| * stage2/builtins.c: Likewise. |
| * stage2/char_io.c: Likewise. |
| * stage2/cmdline.c: Likewise. |
| * stage2/common.c: Likewise. |
| * stage2/disk_io.c: Likewise. |
| * stage2/fat.h: Likewise. |
| * stage2/filesys.h: Likewise. |
| * stage2/freebsd.h: Likewise. |
| * stage2/fsys_ext2fs.c: Likewise. |
| * stage2/fsys_fat.c: Likewise. |
| * stage2/fsys_ffs.c: Likewise. |
| * stage2/gunzip.c: Likewise. |
| * stage2/i386-elf.h: Likewise. |
| * stage2/mb_header.h: Likewise. |
| * stage2/mb_info.h: Likewise. |
| * stage2/pc_slice.h: Likewise. |
| * stage2/shared.h: Likewise. |
| * stage2/stage1_5.c: Likewise. |
| * stage2/stage2.c: Likewise. |
| * stage2/start.S: Likewise. |
| |
| 2001-11-07 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/builtins.c (terminal_func) [!SUPPORT_SERIAL]: Disable |
| the wait code, as it is usable only when serial support is on. |
| Reported by Karl Hammar <karl@kalle.csb.ki.se>. |
| |
| 2001-10-27 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| JFS and XFS support is added. |
| |
| From Serguei Tzukanov <tzukanov@narod.ru>: |
| * configure.in (--disable-jfs): New option. |
| (--disable-xfs): Likewise. |
| * stage2/Makefile.am (noinst_HEADERS): Added jfs.h and xfs.h. |
| (libgrub_a_SOURCES): Added fsys_jfs.c and fsys_xfs.c. |
| (libgrub_a_CFLAGS): Added -DFSYS_JFS=1 and -DFSYS_XFS=1. |
| (pkgdata_DATA): Added jfs_stage1_5 and xfs_stage1_5. |
| (noinst_PROGRAMS): Added jfs_stage1_5.exec and |
| xfs_stage1_5.exec. |
| (pre_stage2_exec_SOURCES): Added fsys_jfs.c and fsys_xfs.c. |
| (jfs_stage1_5_exec_SOURCES): New variable. |
| (jfs_stage1_5_exec_CFLAGS): Likewise. |
| (jfs_stage1_5_exec_ASFLAGS): Likewise. |
| (jfs_stage1_5_exec_LDFLAGS): Likewise. |
| (xfs_stage1_5_exec_SOURCES): Likewise. |
| (xfs_stage1_5_exec_CFLAGS): Likewise. |
| (xfs_stage1_5_exec_ASFLAGS): Likewise. |
| (xfs_stage1_5_exec_LDFLAGS): Likewise. |
| * stage2/builtins.c (setup_func): Add items for JFS and XFS into |
| STAGE1_5_MAP. |
| * stage2/disk_io.c (fsys_table): Added entries for JFS and XFS. |
| * stage2/filesys.h [FSYS_JFS] (FSYS_JFS_NUM): Set to 1. |
| [FSYS_JFS] (jfs_mount): Declared. |
| [FSYS_JFS] (jfs_read): Likewise. |
| [FSYS_JFS] (jfs_dir): Likewise. |
| [FSYS_JFS] (jfs_embed): Likewise. |
| [!FSYS_JFS] (FSYS_JFS_NUM): Set to 0. |
| [FSYS_XFS] (FSYS_XFS_NUM): Set to 1. |
| [FSYS_XFS] (xfs_mount): Declared. |
| [FSYS_XFS] (xfs_read): Likewise. |
| [FSYS_XFS] (xfs_dir): Likewise. |
| (NUM_FSYS): Added FSYS_JFS_NUM and FSYS_XFS_NUM. |
| * stage2/shared.h (STAGE2_ID_JFS_STAGE1_5): New macro. |
| (STAGE2_ID_XFS_STAGE1_5): Likewise. |
| [FSYS_JFS] (STAGE2_ID): Set to STAGE2_ID_JFS_STAGE1_5. |
| [FSYS_XFS] (STAGE2_ID): Set to STAGE2_ID_XFS_STAGE1_5. |
| * stage2/fsys_jfs.c: New file. |
| * stage2/fsys_xfs.c: Likewise. |
| * stage2/jfs.h: Likewise. |
| * stage2/xfs.h: Likewise. |
| |
| 2001-10-27 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * stage2/apm.S: Always disconnect from APM. Written by Erich |
| Stefan Boleyn. |
| |
| * util/Makefile.am (noinst_DATA): Removed. |
| (EXTRA_DIST): Likewise. |
| |
| 2001-10-14 Gordon Matzigkeit <gord@fig.org> |
| |
| * configure.in: Explicitly call _AM_DEPENDENCIES(CC) for the |
| benefit of older Autoconfs. |
| |
| 2001-10-13 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| * netboot/fsys_tftp.c (tftp_read): Move the unused data |
| forwards, only if AMT is more than zero. If AMT is not positive, |
| subtract BUF_READ from SAVED_FILEPOS and set BUF_READ to zero, |
| to skip the whole buffer. Reported by Frank Mehnert. |
| |
| 2001-10-13 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| Don't use get_diskinfo_floppy. Reported by Ben Liblit |
| <liblit@eecs.berkeley.edu>. |
| |
| * stage2/asm.S (get_diskinfo_floppy): Removed (by cpp). |
| * stage2/bios.c (get_diskinfo_floppy): Removed. |
| (get_diskinfo): Don't call get_diskinfo_floppy any longer. |
| |
| 2001-10-13 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| Based on a patch from Jeremy Katz <katzj@redhat.com>: |
| * docs/grub.texi (Stage2 errors): Added documentation on the |
| error number 33 (Serial device not configured). |
| * grub/asmstub.c (serial_exists): New function. |
| * stage2/serial.c (serial_exists): Likewise. |
| * stage2/serial.h (serial_exists): New prototype. |
| * stage2/shared.h (grub_error_t): ERR_NEED_SERIAL is added. |
| * stage2/builtins.c (terminal_func) [SUPPORT_SERIAL]: If a |
| serial device is not configured yet, restore the terminal and |
| set ERRNUM to ERR_NEED_SERIAL. |
| * stage2/common.c (err_list): Added an item for ERR_NEED_SERIAL. |
| |
| 2001-10-13 Yoshinori K. Okuji <okuji@gnu.org> |
| |
| From Jason Thomas <jason@topic.com.au>: |
| * util/grub-install.in (convert): Add support for DAC960. |
| |
| From Adrian Phillips <a.phillips@dnmi.no>: |
| * lib/device.c (get_dac960_disk_name): New function. |
| (init_device_map) [__linux__]: Add support for DAC960. |
| |
| 2001-10-11 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (reiserfs_super_block): Updated |
| to better match recent reiserfs versions. |
| (reiserfs_mount): Handle cases where journal can't be found, |
| e.g. journal on another disk or unexpected journal parameters. |
| In that case the journal isn't used. |
| |
| 2001-10-10 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (reiserfs_mount): Don't look at |
| the superblock field s_journal_block_count anymore. It used |
| to contain 0, it never contained a valid value, and now I |
| have a report that it can contain an invalid value. |
| Bug reported by Jim Caley <caley@chesco.com>. |
| |
| 2001-09-24 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (reiserfs_dir): Set errnum to |
| ERR_FSYS_CORRUPT if a symlink can't be read for some reason, |
| but no error is set by read. |
| |
| 2001-08-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Derrik Pates <dpates@dsdk12.net>: |
| * stage2/asm.S [!STAGE1_5] (grub_halt): Set the level of APM |
| support to 1.1, before turning off the power state. |
| |
| 2001-08-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-md5-crypt.in: Prefix backquotes with backslashes in |
| strings. From Fernando Silveira. |
| |
| 2001-08-02 Gordon Matzigkeit <gord@fig.org> |
| |
| * stage2/common.c (init_bios_info): Ignore zero-length memory |
| ranges. From Derrik Pates <dpates@dsdk12.net>. |
| |
| 2001-07-26 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/Makefile.am (libgrub_a_CFLAGS): Enable USE_MD5_PASSWORDS |
| for libgrub. Previously that was implicitly done by configure.in |
| until the patch from 2001-07-04, which moved that flag from CFLAGS |
| to FSYS_CFLAGS. Reported by YAMAGUCHI Shingo |
| <shingo@kip.iis.toyama-u.ac.jp> |
| |
| 2001-07-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in (convert): Recognize the naming scheme |
| for Linux devfs floppy devices. Reported by Jason Thomas |
| <jason@topic.com.au>. |
| |
| 2001-07-07 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * netboot/compile: New file. This was also missing... How many |
| ``compile''s does automake want? |
| |
| 2001-07-07 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Jan Zerebecki <jan.list@elite-pferde.de>: |
| * acinclude.m4 (grub_DEFINE_FILE): Escape double-quotations as |
| well. |
| |
| 2001-07-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (AM_INIT_AUTOMAKE): Set the version number to |
| 0.90. |
| |
| 2001-07-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Ughh! I forgot to add this file to the CVS. |
| |
| * docs/compile: New file. |
| |
| 2001-07-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub.texi: Updated. |
| |
| 2001-07-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/boot.c (load_initrd) [!NO_DECOMPRESSION]: Set |
| NO_DECOMPRESSION to one before opening INITRD, so that GRUB |
| doesn't decompress an initrd automatically. Reported by |
| Thierry Laronde. |
| |
| 2001-07-04 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/compile: New file. |
| * docs/mdate-sh: Likewise. |
| * docs/texinfo.tex: Likewise. |
| * compile: Removed. |
| * mdate-sh: Likewise. |
| * texinfo.tex: Likewise. |
| * config.guess: Updated from automake-1.4h. |
| * config.sub: Likewise. |
| * depcomp: Likewise. |
| * install-sh: Likewise. |
| * missing: Likewise. |
| * mkinstalldirs: Likewise. |
| * configure.in (AS): New variable. |
| (ASFLAGS): Likewise. |
| (--disable-md5-password): Use FSYS_CFLAGS instead of CFLAGS. |
| * stage1/Makefile.am (AM_CFLAGS): Renamed to ... |
| (AM_ASFLAGS): ... this. |
| * stage2/Makefile.am (pre_stage2_exec_ASFLAGS): New variable. |
| (start_exec_CFLAGS): Renamed to ... |
| (start_exec_ASFLAGS): ... this. |
| (start_exec-start.o): Renamed to ... |
| (start_exec-start.$(OBJEXT)): ... this. |
| (e2fs_stage1_5_exec_ASFLAGS): New variable. |
| (fat_stage1_5_exec_ASFLAGS): Likewise. |
| (ffs_stage1_5_exec_ASFLAGS): Likewise. |
| (minix_stage1_5_exec_ASFLAGS): Likewise. |
| (reiserfs_stage1_5_exec_ASFLAGS): Likewise. |
| (vstafs_stage1_5_exec_ASFLAGS): Likewise. |
| (diskless_exec_ASFLAGS): Likewise. |
| (nbloader_exec_CFLAGS): Renamed to ... |
| (nbloader_exec_ASFLAGS): ... this. |
| (nbloader_exec-nbloader.o): Renamed to ... |
| (nbloader_exec-nbloader.$(OBJEXT)): ... this. |
| (pxeloader_exec_CFLAGS): Renamed to ... |
| (pxeloader_exec_ASFLAGS): ... this. |
| (pxeloader_exec-pxeloader.$(OBJEXT)): New target. |
| |
| 2001-07-03 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Julien Bordet <julien.bordet@int-evry.fr>: |
| * stage2/i386-elf.h (Elf32_Shdr): New type. |
| * stage2/boot.c (load_image): Added ELF symbol loading support. |
| |
| 2001-06-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/char_io.c [STAGE1_5] (grub_strcmp): Defined, even |
| for Stage 1.5. See thecomment, for a possible future strategy. |
| * stage2/fsys_vstafs.c [!FSYS_VSTAFS]: Don't define anything. |
| [STAGE1_5] (grub_strcmp): Removed. |
| (get_file_info): Made static. |
| (vstafs_readdir): Likewise. |
| (vstafs_nextdir): Likewise. |
| (curr_ext): Likewise. |
| (current_direntry): Likewise. |
| (current_blockpos): Likewise. |
| (a): Likewise. |
| |
| 2001-06-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| VSTa filesystem support is added. |
| |
| From Kristoffer Brånemyr <ztion@swipnet.se>: |
| * stage2/configure.in (--disable-vstafs): New option. |
| * stage2/Makefile.am (noinst_HEADERS): Added vstafs.h. |
| (libgrub_a_SOURCES): Added fsys_vstafs.c. |
| (libgrub_a_CFLAGS): Added -DFSYS_VSTAFS=1. |
| (pkgdata_DATA): Added vstafs_stage1_5. |
| (noinst_PROGRAMS): Added vstafs_stage1_5.exec. |
| (pre_stage2_exec_SOURCES): Added fsys_vstafs.c. |
| (vstafs_stage1_5_exec_SOURCES): New variable. |
| (vstafs_stage1_5_exec_CFLAGS): Likewise. |
| (vstafs_stage1_5_exec_LDFLAGS): Likewise. |
| * stage2/disk_io.c (fsys_table): Added an entry for vstafs. |
| * stage2/filesys.h [FSYS_VSTAFS] (FSYS_VSTAFS_NUM): Defined as |
| 1. |
| [FSYS_VSTAFS] (vstafs_mount): New prototype. |
| [FSYS_VSTAFS] (vstafs_read): Likewise. |
| [FSYS_VSTAFS] (vstafs_dir): Likewise. |
| [!FSYS_VSTAFS] (FSYS_VSTAFS_NUM): Defined as 0. |
| (NUM_FSYS): Added FSYS_VSTAFS_NUM. |
| * stage2/pc_slice.h (PC_SLICE_TYPE_VSTAFS): New macro. |
| * stage2/shared.h (STAGE2_ID_VSTAFS_STAGE1_5): Likewise. |
| [STAGE1_5 && FSYS_VSTAFS] (STAGE2_ID): Defined as |
| STAGE2_ID_VSTAFS_STAGE1_5. |
| * stage2/vstafs.h: New file. |
| * stage2/fsys_vstafs.c: Likewise. |
| |
| 2001-06-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Thierry Laronde <thierry@cri74.org>: |
| * stage2/builtins.c (configfile_func): Added a prototype. |
| (bootp_func): If `--with-configfile' is given, set |
| WITH_CONFIGFILE to one, and call configfile_func with |
| CONFIG_FILE. |
| |
| 2001-06-21 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub.texi: Update the location of the CVS repository |
| [/home/cvs -> /cvsroot/grub]. |
| * README: Likewise. |
| |
| 2001-06-19 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/boot.c (load_image): If the image is a Multiboot ELF OS |
| image, get the physical entry address, when a loaded memory |
| segment contains it. And, set ENTRY_ADDR to it, after printing |
| out the virtual one. Suggested by Rogelio M. Serrano Jr. |
| <rogelio@victorio.com>. |
| |
| 2001-05-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub.texi: Fix some typos. Reported by Florian Hatat |
| <mininet@wanadoo.fr>. |
| |
| 2001-05-29 Pavel Roskin <proski@gnu.org> |
| |
| * configure.in (AC_OUTPUT): Remove debian/Makefile. |
| |
| 2001-05-28 Gordon Matzigkeit <gord@fig.org> |
| |
| * Makefile.am (SUBDIRS): Remove reference to debian directory. |
| Packaging is no longer done by the GRUB team. |
| |
| 2001-05-03 Gordon Matzigkeit <gord@fig.org> |
| |
| * stage1/stage1.S (nt_magic): Explicitly reserve space for the NT |
| magic number. |
| |
| 2001-05-25 Klaus Reichl <Klaus.Reichl@alcatel.at> |
| |
| * stage2/stage2.c (print_entries_raw): New function. |
| (run_menu): Use it to implement menu & command-list if on dumb |
| terminals. |
| Changes are: |
| Adjust FIRST_ENTRY only on non-dumb terminals. |
| Setting of SHOW_MENU is honoured also on dumb |
| terminals. |
| Likely if SHOW_MENU is false, ESC brings her to the |
| menu - not to the command-line as before. |
| PRINT_BORDER, GOTOXY, SET_LINE_xxx are only called if |
| not on dumb terminals. |
| Show entry number when timeout is running if terminal is dumb. |
| Prompt with entry number when waiting for keys. |
| |
| 2001-05-14 Pavel Roskin <proski@gnu.org> |
| |
| * stage2/shared.h (ENTRY): Remove unnecessary `##'. |
| |
| 2001-05-03 Jochen Hoenicke <jochen@gnu.org> |
| |
| * grub/asmstub.c (biosdisk): Work around a bug in linux's ez |
| remapping. Problem reported by Ben Byer <bbyer@rice.edu>. |
| |
| 2001-03-28 Gordon Matzigkeit <gord@fig.org> |
| |
| * stage2/boot.c (load_image): Don't cast entry_addr to an int, or |
| the top bit will be interpreted as the sign. |
| |
| 2001-03-16 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Bodo Rueskamp <br@itchigo.com>: |
| * stage2/boot.c (load_initrd): Avoid the last 64kb for |
| Linux 2.2.x bug. |
| |
| 2001-03-03 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/multiboot.texi (History): Written. |
| |
| 2001-02-28 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From HASEGAWA Tomoki <thasegawa@mta.biglobe.ne.jp>: |
| * lib/device.c (get_ide_disk_name) [__FreeBSD__]: Add support |
| for FreeBSD-4.0 or later. Use "/dev/rad0". |
| * util/grub-install.in (convert): Add code for FreeBSD |
| disklabels. |
| |
| 2001-02-28 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Thierry Laronde <thierry@cri74.org>: |
| * stage2/stage2.c (cmain): If the default entry is wrong, set it |
| to FALLBACK_ENTRY if FALLBACK_ENTRY is valid, otherwise set it |
| to zero. Suggested by Nicolas Boos <nicolas.boos@wanadoo.fr>. |
| |
| 2001-02-28 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * acconfig.h (AUTO_LINUX_MEM_OPT): New entry. |
| * configure.in (--disable-auto-linux-mem-opt): New option. |
| * stage2/builtins.c (kernel_func) [!AUTO_LINUX_MEM_OPT]: Add |
| KERNEL_LOAD_NO_MEM_OPTION into LOAD_FLAGS, whether the user |
| specifies --no-mem-option or not. |
| |
| 2001-02-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (chainloader_func): Don't check if the |
| current partition is FAT, but check if it has a FAT partition |
| type and the BPB has a system id starting with "MSWIN". |
| |
| 2001-02-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Added hercules support based on a patch by Frank Mehnert |
| <fm3@os.inf.tu-dresden.de>. I translated his assembly code into |
| C, and separated hercules from the normal console. |
| |
| * configure.in (--disable-hercules): New option. |
| |
| * grub/asmstub.c: Include <hercules.h>. |
| (set_attrib): Renamed to ... |
| (console_set_attrib): ... this. |
| (herc_cls): New function. |
| (herc_getxy): Likewise. |
| (herc_gotoxy): Likewise. |
| (herc_putchar): Likewise. |
| (herc_set_attrib): Likewise. |
| |
| * stage2/Makefile.am (noinst_HEADERS): Added hercules.h. |
| (libgrub_a_CFLAGS): Added -DSUPPORT_HERCULES=1. |
| (HERCULES_FLAGS): New variable. |
| (STAGE2_COMPILE): Added $(HERCULES_FLAGS). |
| (pre_stage2_exec_SOURCES): Added hercules.c. |
| * stage2/asm.S [!STAGE1_5] (set_attrib) Renamed to ... |
| [!STAGE1_5] (console_set_attrib): ... this. |
| * stage2/builtins.c [SUPPORT_HERCULES] (terminal_func): Added |
| hercules support. |
| (builtin_table) [SUPPORT_HERCULES]: Added a pointer to |
| BUILTIN_TERMINAL. |
| * stage2/char_io.c [SUPPORT_HERCULES]: Include <hercules.h>. |
| [!STAGE1_5] (get_cmdline) [SUPPORT_HERCULES]: Added hercules |
| support. |
| [!STAGE1_5] (getkey) [SUPPORT_HERCULES]: Likewise. |
| [!STAGE1_5] (checkkey) [SUPPORT_HERCULES]: Likewise. |
| (grub_putchar) [SUPPORT_HERCULES]: Likewise. |
| [!STAGE1_5] (gotoxy) [SUPPORT_HERCULES]: Likewise. |
| [!STAGE1_5] (getxy) [SUPPORT_HERCULES]: Likewise. |
| [!STAGE1_5] (cls) [SUPPORT_HERCULES]: Likewise. |
| (set_attrib): New function. |
| * stage2/shared.h (console_set_attrib): Declared. |
| (TERMINAL_HERCULES): New macro. |
| * stage2/stage2.c (run_menu) [SUPPORT_HERCULES]: Added hercules |
| support. |
| * stage2/hercules.h: New file. |
| * stage2/hercules.c: Likewise. |
| |
| 2001-02-17 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From "Treutwein; Bernhard" |
| <Bernhard.Treutwein@Verwaltung.Uni-Muenchen.DE>: |
| * docs/grub.texi (DOS/Windows): Improved the readability. |
| |
| 2001-02-11 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub.texi (Command-line and menu commands): Renamed to ... |
| (General commands): ... this. |
| |
| 2001-02-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/asm.S [STAGE1_5] (chain_stage2): Save the second sector |
| of stage2 in %ecx temporarily, and set %ebp to %ecx after |
| switching to protected mode. I forgot that %ebp is broken by |
| rot_to_real. Reported by Torvald Riegel |
| <tr16@inf.tu-dresden.de>. |
| |
| 2001-02-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub-new.texi: Moved to ... |
| * docs/grub.texi: ... here. And, include internals.texi. |
| * docs/internals.texi: New file. |
| * docs/prog-ref.texi: Removed. |
| * docs/user-ref.texi: Likewise. |
| * docs/tutorial.texi: Likewise. |
| * docs/appendices.texi: Likewise. |
| * docs/Makefile.am (grub_TEXINFOS): Removed prog-ref.texi, |
| user-ref.texi, tutorial.texi, and appendices.texi. Added |
| internals.texi. |
| |
| 2001-02-03 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Erik Schoenfelder <schoenfr@gaertner.de>: |
| * stage2/shared.h (LINUX_INITRD_MAX_ADDRESS): Changed from |
| 0x3C000000 to 0x38000000. |
| |
| 2001-02-03 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (savedefault_func) |
| [!SUPPORT_DISKLESS && !GRUB_UTIL]: Check if the version |
| contained in the buffer matches to current one as well. |
| |
| 2001-02-02 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (savedefault_func) |
| [!SUPPORT_DISKLESS && !GRUB_UTIL]: Check if the stage2 id is |
| STAGE2_ID_STAGE2. Suggested by Jochen Hoenicke. |
| |
| * stage2/stage2.c (cmain): If DEFAULT_ENTRY is out of entries, |
| reset DEFAULT_ENTRY to zero. |
| |
| 2001-02-02 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Make savedefault workable even with Stage 1.5. Reported by |
| Thierry Laronde <thierry@cri74.org>. |
| |
| * grub/asmstub.c (chain_stage2): Added an additional argument, |
| SECOND_SECTOR. |
| * stage2/asm.S [STAGE1_5] (chain_stage2): Set %ebp to |
| SECOND_SECTOR. |
| * stage2/disk_io.c [STAGE1_5] (disk_read_hook): Defined. |
| [STAGE1_5] (disk_read_func): Likewise. |
| (rawread) [STAGE1_5]: Handle DISK_READ_FUNC. |
| (grub_read) [STAGE1_5]: Likewise. |
| * stage2/fsys_ext2fs.c (ext2fs_read) [STAGE1_5]: Likewise. |
| * stage2/fsys_fat.c (fat_read) [STAGE1_5]: Likewise. |
| * stage2/fsys_ffs.c (ffs_read) [STAGE1_5]: Likewise. |
| * stage2/fsys_minix.c (minix_read) [STAGE1_5]: Likewise. |
| * stage2/fsys_reiserfs.c (reiserfs_read) [STAGE1_5]: Likewise. |
| |
| 2001-02-02 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * netboot/config.c [GRUB && INCLUDE_PCI] (pci_dispatch_table): |
| New structure. |
| [GRUB && INCLUDE_PCI] (PCI_NIC): New variable. |
| (eth_probe) [GRUB && INCLUDE_PCI]: If a PCI NIC candidate is |
| present, probe it first. |
| |
| 2001-01-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Danilo Godec <danci@agenda.si>: |
| * stage2/pc_slice.h (PC_SLICE_TYPE_LINUX_RAID): New macro. |
| * stage2/fsys_ext2fs.c (ext2fs_mount): Add a check for |
| PC_SLICE_LINUX_RAID. |
| |
| 2001-01-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Bernhard Treutwein |
| <Bernhard.Treutwein@Verwaltung.Uni-Muenchen.DE>: |
| * docs/grub-new.texi (DOS/Windows): Made more readable. |
| |
| 2001-01-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/multiboot.texi: Start reorganizing Multiboot |
| Specification. |
| |
| 2001-01-15 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Thierry Laronde <thierry.laronde@polynum.com>: |
| * docs/user-ref.texi (Command-line and menu commands): Update |
| the description about setkey. |
| * stage2/builtins.c (setkey_func): When checking if TO_KEY and |
| FROM_KEY are specified, see *TO_KEY and *FROM_KEY instead of |
| TO_KEY and FROM_KEY, respectively. |
| |
| 2001-01-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Thierry Laronde <thierry.laronde@polynum.com>: |
| * util/grub-md5-crypt.in (prefix): New variable. |
| (exec_prefix): Likewise. |
| (sbindir): Likewise. |
| |
| 2001-01-12 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/multiboot.h [__ELF__] (MULTIBOOT_HEADER_FLAGS): Defined |
| as 0x00000003 instead of 0x00010003. |
| * docs/boot.S (multiboot_header) [__ELF__]: Don't define a.out |
| kludge information. |
| |
| * docs/Makefile.am (EXTRA_PROGRAMS): New variable. |
| [BUILD_EXAMPLE_KERNEL] (noinst_DATA): Removed. |
| [BUILD_EXAMPLE_KERNEL] (noinst_PROGRAMS): Changed to kernel. |
| [BUILD_EXAMPLE_KERNEL] (kernel_exec_SOURCES): Renamed to ... |
| [BUILD_EXAMPLE_KERNEL] (kernel_SOURCES): ... this. |
| [BUILD_EXAMPLE_KERNEL] (kernel_exec_CFLAGS): Renamed to ... |
| [BUILD_EXAMPLE_KERNEL] (kernel_CFLAGS): ... this. |
| [BUILD_EXAMPLE_KERNEL] (kernel_exec_LDFLAGS): Renamed to ... |
| [BUILD_EXAMPLE_KERNEL] (kernel_LDFLAGS): ... this. |
| [BUILD_EXAMPLE_KERNEL] (kernel): Removed. |
| [BUILD_EXAMPLE_KERNEL] (boot.o): New dependency. |
| (CLEANFILES): New variable. |
| |
| 2001-01-11 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c [SUPPORT_NETBOOT] (ifconfig_func): Always |
| print current network configuration. |
| [SUPPORT_NETBOOT] (tftpserver_func): Use ifconfig instead of |
| arp_server_override. |
| * netboot/main.c (arp_server_override): Removed. |
| * netboot/etherboot.h (arp_server_override): Likewise. |
| |
| 2001-01-11 Eugene Doudine <dudin@np.nk.nornik.ru> |
| |
| * stage2/builtins.c [SUPPORT_NETBOOT] (ifconfig_func): New |
| function to configure network interface from command line. |
| [SUPPORT_NETBOOT] (builtin_ifconfig): New variable. |
| [SUPPORT_NETBOOT] (builtin_table): Added a pointer to |
| BUILTIN_IFCONFIG. |
| * netboot/main.c (ifconfig): New function. |
| * netboot/etherboot.h (ifconfig): Added the prototype. |
| |
| 2001-01-11 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/Makefile.am [BUILD_EXAMPLE_KERNEL] (noinst_DATA): New |
| variable. |
| [BUILD_EXAMPLE_KERNEL] (noinst_PROGRAMS): Likewise. |
| [BUILD_EXAMPLE_KERNEL] (kernel_exec_SOURCES): Likewise. |
| [BUILD_EXAMPLE_KERNEL] (kernel_exec_CFLAGS): Likewise. |
| [BUILD_EXAMPLE_KERNEL] (kernel_exec_LDFLAGS): Likewise. |
| [BUILD_EXAMPLE_KERNEL] (kernel): New target. |
| * configure.in (--enable-example-kernel): New option. |
| |
| * docs/kernel.c (cmain): Cast unsigned long variables to |
| unsigned explicitly, to suppress GCC warnings. |
| |
| 2001-01-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/shared.h (BOOTSEC_BPB_HIDDEN_SECTORS): New macro. |
| |
| * stage2/builtins.c (chainloader_func): If CURRENT_PARTITION is |
| FAT, set the hidden sectors field of the BPB to PART_START, to |
| avoid a Windows bug which affects only when Windows is booted |
| from a logical partition. And, clear ERRNUM after testing if a |
| partition is FAT, because open_partition or fat_mount may set |
| ERRNUM. Reported by Ingo Korb <ingo@akana.de>. |
| |
| 2001-01-07 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (boot_func): In the chain-loading mode, |
| clear the active flag of each of the loaded partition entries, |
| and then set the active flag of the booted partition image. |
| |
| 2001-01-04 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/builtins.c (embed_func): Call open_partition() even for |
| MBR, so that part_start is correct. This fixes a bug reported by |
| Matthias Granberry <matthias@slurpee.org>. |
| |
| 2000-12-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/disk_io.c (make_saved_active): Change the variable name |
| ``MBR'' to lower case. |
| (set_partition_hidden_flag): Likewise. |
| |
| 2000-12-20 Jochen Hoenicke <jochen@gnu.org> |
| |
| From Cedric Ware <ware@com.enst.fr>: |
| * stage2/fsys_ext2.c (ext2fs_mount): Detect ext2 partitions in |
| a OpenBSD/NetBSD FS_EXT2FS slice. |
| * stage2/pc_slice.h (FS_ADOS): New Macro from OpenBSD/NetBSD. |
| (FS_HFS): Likewise. |
| (FS_FILECORE): Likewise. |
| (FS_EXT2FS): Likewise. |
| |
| 2000-12-17 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/disk_io.c (rawread): Check if there is a EZD partition |
| and remap sector 0 to sector 1 like EZ-BIOS does. |
| (rawwrite): New function to write to disk. Also does EZD |
| remapping. |
| (devwrite): New function. Does the special remapping to |
| partitions needed for linux. This contains the code that was |
| previously duplicated in embed_func and install_func at several |
| places. |
| (make_saved_active): Use rawwrite. Don't use SCRATCHSEG, as it is |
| needed by devwrite. |
| (set_partition_hidden_flag): Likewise. |
| * stage2/disk_io.h (rawwrite): New function. |
| (devwrite): Likewise. |
| * stage2/pc_slice.h (PC_SLICE_TYPE_EZD): New macro. |
| * stage2/builtins.c (embed_info): New variable to store the |
| position of the embedded stage1_5 for setup_func. |
| (embed_func): Don't embed after the MBR if an EZ-BIOS is detected |
| there. Use the new devwrite method. If embedding is successful |
| store position in embed_info. |
| (install_func): Use devwrite. Don't use SCRATCHSEG. |
| (partnew_func): Use rawwrite. Don't use SCRATCHSEG. |
| (parttype_func): Likewise. |
| (savedefault_func): Likewise. |
| (setup_func): New nested function embed_stage1_5. Stage1_5 is now |
| also be embedded into filesystems which supports that. |
| |
| 2000-12-17 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (chainloader_func): Set ERRNUM to |
| ERR_EXEC_FORMAT, when ERRNUM is ERR_NONE, even if grub_read |
| fails in reading one sector. |
| |
| 2000-12-14 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/prog-ref.texi (Partition types): Rewrite the footnotes. |
| Suggested by Ralf.Medow@t-online.de (Ralf Medow). |
| |
| 2000-12-14 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Erik Schoenfelder <schoenfr@gaertner.de>: |
| * util/grub-install.in (convert): Revised the fix for floppy |
| device handling. |
| |
| 2000-12-14 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From HORIKAWA Kazunori <kaz-hori@tkd.att.ne.jp>: |
| * stage2/bios.c (get_diskinfo): Append 16 bytes dummy data to |
| DRP, because the BIOS of Thinkpad X20 write a garbage beyond the |
| size of the structure. |
| |
| 2000-12-09 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/disk_io.c (next_partition): Mask out bsd partition sub |
| type when checking if last partition was a bsd partition. |
| Reported by Heikki Vatiainen <hessu@cs.tut.fi>. |
| |
| 2000-12-09 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Leendert Meyer <leen.meyer@home.nl>: |
| * util/grub-install.in (convert): If a floppy device is |
| specified, remove everything from $tmp_part. |
| |
| 2000-12-09 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c [__linux__] (write_to_partition): Use strcpy |
| instead of strcat, to overwrite "/disc". Reported by Thiago |
| Macieira <thiagom@mail.com>. |
| |
| 2000-12-05 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_minix.c (minix_mount): Corrected the check for |
| IS_PC_SLICE_TYPE_MINIX; minix was only working if slice type was |
| wrong! Reported by Ralf Medow <ralf.medow@t-online.de>. |
| |
| 2000-11-27 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c: Handle items with old version key on |
| new version reiserfs partition. |
| (K_OFFSET): Removed. |
| (IH_KEY_OFFSET): New Macro, which checks item head version. |
| (IH_KEY_ISOFFSET): Likewise. |
| (reiserfs_read): Use new macros. |
| (reiserfs_dir): Fixed version check for >4GB stat entries. |
| |
| 2000-11-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/common.c (init_bios_info) [!STAGE1_5]: Don't call |
| track_int13, because the current implementation hangs up in some |
| environments. |
| |
| 2000-11-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * grub/asmstub.c (serial_init) [!O_SYNC]: Don't specify O_SYNC |
| to open SERIAL_DEVICE. |
| (serial_init) [O_FSYNC]: Specify O_FSYNC to open SERIAL_DEVICE. |
| Reported by Farid Hajji <farid.hajji@ob.kamp.net>. |
| |
| 2000-11-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Vesa Jaaskelainen <jaaskela@tietomyrsky.fi>: |
| * stage2/builtins.c (testvbe_func): Don't set the bit 14 of a |
| VBE mode number explicitly when calling get_vbe_mode_info. |
| (vbeprobe_func): Likewise. |
| |
| 2000-11-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| The code for the "INT 13H tracking technique" is somewhat |
| simplified. |
| |
| * stage2/asm.S [!STAGE1_5] (track_int13): Don't replace an int13 |
| handler with set_tf_int13_handler. Instead, track_int13 itself |
| emulates an int13 interrupt. |
| [!STAGE1_5] (set_tf_int13_handler): Removed. |
| [!STAGE1_5] (int1_handler): Use movzbw instead of xorb and movb. |
| |
| 2000-11-15 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * acconfig.h (PRESET_MENU_STRING): New entry. |
| * acinclude.m4 (grub_DEFINE_FILE): New M4 macro. |
| * configure.in (--enable-preset-menu): New option. |
| * stage2/stage2.c [PRESET_MENU_STRING] (preset_menu): New |
| variable. |
| [PRESET_MENU_STRING] (preset_menu_offset): Likewise. |
| [PRESET_MENU_STRING] (open_preset_menu): New function. |
| [PRESET_MENU_STRING] (read_from_preset_menu): Likewise. |
| [PRESET_MENU_STRING] (close_preset_menu): Likewise. |
| [!PRESET_MENU_STRING] (open_preset_menu): New macro. |
| [!PRESET_MENU_STRING] (read_from_preset_menu): Likewise. |
| [!PRESET_MENU_STRING] (close_preset_menu): Likewise. |
| (get_line_from_config): Accept a new argument READ_FROM_FILE. |
| If it is false, read data from the preset menu instead. |
| (cmain): If grub_open fails in opening the configuration file, |
| then try to open the preset menu. |
| |
| 2000-11-11 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Jan Fricke <fricke@uni-greifswald.de>: |
| * stage2/asm.S [!STAGE1_5] (set_vbe_mode): Add a missing `$' |
| prefix. |
| |
| 2000-11-11 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/bios.c (get_diskinfo): If BIOS supports LBA but doesn't |
| return the correct total number of sectors, compute this by |
| C/H/S returned by get_diskinfo_int13_extensions instead of |
| get_diskinfo_standard. |
| |
| 2000-11-09 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/disk_io.c (make_saved_active): Set ERRNUM to |
| ERR_DEV_VALUES instead of ERR_NO_PART, when the save partition |
| is not a primary partition. |
| |
| 2000-11-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/user-ref.texi (Features): Update the URL of grub/98. |
| |
| 2000-11-03 OKUJI Yoshinori <okuji@gnu.org> |
| |
| VBE support is _partially_ implemented. |
| |
| * stage2/mb_header.h (multiboot_header): Added new fields, |
| mode_type, width, height, and depth. |
| (MULTIBOOT_FOUND): Check if MULTIBOOT_VIDEO_MODE is set, and |
| check if LEN is greater than or equal to 48, if set. |
| (MULTIBOOT_UNSUPPORTED): Set to 0x0000FFF8. |
| (MULTIBOOT_VIDEO_MODE): New macro. |
| * stage2/mb_info.h (multiboot_info): Added new fields, |
| vbe_control_info, vbe_mode_info, vbe_mode, vbe_interface_seg, |
| vbe_interface_off, and vbe_interface_len. |
| (MB_INFO_VIDEO_INFO): New macro. |
| |
| * stage2/shared.h (vbe_controller): New structure. |
| (vbe_mode): Likewise. |
| (get_vbe_controller_info): Declared. |
| (get_vbe_mode_info): Likewise. |
| (set_vbe_mode): Likewise. |
| * stage2/asm.S [!STAGE1_5] (get_vbe_controller_info): New |
| function. |
| [!STAGE1_5] (get_vbe_mode_info): Likewise. |
| [!STAGE1_5] (set_vbe_mode): Likewise. |
| * grub/asmstub.c (get_vbe_controller_info): Likewise. |
| (get_vbe_mode_info): Likewise. |
| (set_vbe_mode): Likewise. |
| |
| * stage2/builtins.c (testvbe_func): New function. |
| (builtin_testvbe): New variable. |
| (vbeprobe_func): New function. |
| (builtin_vbeprobe): New variable. |
| (builtin_table): Added pointers to BUILTIN_TESTVBE and |
| BUILTIN_VBEPROBE. |
| |
| 2000-11-01 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/help2man: Copied from help2man-1.23. |
| |
| 2000-10-29 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/asm.S [STAGE1_5]: Don't include setjmp.S or apm.S. |
| |
| 2000-10-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c (read_device_map): Don't parse a line, if it is |
| empty. Reported by Holger Bauer <bauer@itsm.uni-stuttgart.de>. |
| |
| 2000-10-25 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/builtins.c (md5crypt_func): Use all bits of currticks () |
| to generate the salt. The old code would often produce the same |
| one character salt. |
| |
| 2000-10-25 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/apm.S (get_apm_info): Fix a serious typo: prot_to_real |
| -> real_to_prot. Umm, I can't understand why it worked for me! |
| |
| 2000-10-24 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/builtins.c (setup_func): When invoking install with an |
| embedded stage1_5 give the path to menu.lst as real_config_file. |
| |
| 2000-10-23 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/multiboot.texi: Upgraded to 0.6.92. |
| (Boot information format): Re-designed the graphics table. |
| |
| 2000-10-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/tutorial.texi: Miscellaneous updates. |
| * docs/user-ref.texi: Likewise. |
| * docs/appendices.texi: Likewise. |
| |
| 2000-10-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in (usage): Removed unnecessary commas. |
| |
| * util/grub-md5-crypt.in: New file. |
| * util/Makefile.am (sbin_SCRIPTS): Added grub-md5-crypt. |
| * configure.in (AC_OUTPUT): Added util/grub-md5-crypt. |
| * docs/Makefile.am (man_MANS): Added grub-md5-crypt.8. |
| [MAINTAINER_MODE] ($(srcdir)/grub-md5-crypt.8): New target. |
| * docs/grub-md5-crypt.8: New file. Generated by help2man. |
| |
| * docs/grub.texi (grub-md5-crypt): New direntry. |
| (Invoking grub-md5-crypt): New entry. |
| * docs/user-ref.texi (Invoking grub-md5-crypt): New chapter. |
| |
| 2000-10-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Matthias Granberry <matthias@slurpee.org>: |
| * util/grub-install.in (convert): Added backslashes into |
| continuous lines. |
| |
| 2000-10-21 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/md5.c (check_md5_password): Removed. |
| (md5_password): New function. Mostly copied from |
| check_md5_password. |
| (md5_init): Made static. |
| (md5_update): Likewise. |
| (md5_final): Likewise. |
| * stage2/md5.h (check_md5_password): Changed to just a macro. |
| (md5_password): Declared. |
| (make_md5_password): New macro. |
| * stage2/char_io.c [!STAGE1_5] (grub_strstr): Rewriten, because |
| it was too buggy. |
| * stage2/builtins.c [USE_MD5_PASSWORDS] (md5crypt_func): New |
| function. |
| [USE_MD5_PASSWORDS] (builtin_md5crypt): New variable. |
| (builtin_table) [USE_MD5_PASSWORDS]: Added a pointer to |
| BUILTIN_MD5CRYPT. |
| * docs/tutorial.texi (Security): Added a paragraph about |
| md5crypt. |
| |
| 2000-10-21 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/user-ref.texi: Fixed several typos and some inappropriate |
| texinfo commands, and update the descriptions about some |
| commands. |
| |
| 2000-10-20 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (displayapm_func): New function. |
| (builtin_displayapm): New variable. |
| (builtin_table): Added a pointer to BUILTIN_DISPLAYAPM. |
| |
| 2000-10-20 OKUJI Yoshinori <okuji@gnu.org> |
| |
| APM BIOS table support is added, based on a patch by Matt Yourst |
| <yourst@mit.edu>. |
| |
| * docs/multiboot.texi (Boot information format): Added the |
| definition of APM table format. |
| |
| * stage2/mb_info.h (apm_info): New structure. |
| (multiboot_info): Added a new element, apm_table. |
| (MB_INFO_APM_TABLE): New macro. |
| * stage2/asm.S (apm_bios_info): New variable. |
| Include "apm.S". |
| * stage2/apm.S: New file. |
| * stage2/common.c (init_bios_info) [!STAGE1_5]: Added APM BIOS |
| table support. |
| * stage2/shared.h (apm_bios_info): Declared. |
| (get_apm_info): Likewise. |
| * stage2/Makefile.am (EXTRA_DIST): Added apm.S. |
| * grub/asmstub.c (apm_bios_info): New variable. |
| (get_apm_info): New function. |
| |
| 2000-10-19 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Segregate functions which are copyrighted differently. |
| |
| * stage2/setjmp.S: New file. |
| * stage2/Makefile.am (EXTRA_DIST): Added setjmp.S. |
| * stage2/asm.S: Include "setjmp.S". |
| (grub_setjmp): Moved to ... |
| * stage2/setjmp.S (grub_setjmp): ... here. |
| * stage2/asm.S (grub_longjmp): Moved to ... |
| * stage2/setjmp.S (grub_longjmp): ... here. |
| |
| 2000-10-18 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/Makefile.am (noinst_HEADERS): Added md5.h. Reported by |
| Volker Augustin <Volker.Augustin@stud.uni-regensburg.de>. |
| |
| 2000-10-17 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (--disable-md5password): Renamed to ... |
| (--disable-md5-password): ... this. Just for my preference. |
| |
| 2000-10-17 Jochen Hoenicke <jochen@gnu.org> |
| |
| Added MD5 passwords and extended password command: |
| |
| * configure.in (--disable-md5password): New option. |
| * stage2/Makefile.am (libgrub_a_SOURCES): Added md5.c. |
| (pre_stage2_exec_SOURCES): Likewise. |
| * stage2/md5.c: New file. |
| * stage2/shared.h (password_t): New type. |
| (password_type): New variable. |
| (BUILTIN_HIDDEN): New flag, describing that a command should not |
| be printed when booting the entry. |
| (check_password): New function. |
| * stage2/cmdline.c (run_script): Don't show commands that have |
| the hidden attribute. |
| * stage2/builtins.c (password_type): New variable. |
| (check_password): New function. |
| (password_func): Handle the --md5 option and set password_type. |
| Check if in CMDLINE or SCRIPT mode and ask password immediately. |
| (builtin_password): Also allow passwords in CMDLINE mode, make |
| it hidden, so the user wont see the password he should enter. |
| Changed command description. |
| (builtin_pause): Make the command hidden. |
| (pause_func): Print argument, since the command is now hidden. |
| * stage2/stage2.c (run_menu): Call check_password to check password. |
| * docs/tutorial.texi (Security): Describe the new features of the |
| password commands. |
| * docs/user-ref.texi (Menu-specific commands): password command |
| moved ... |
| (Command-line and menu commands): ... to here. New features |
| doumented. |
| |
| 2000-10-17 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (setkey_func): Clear the all elements of |
| BIOS_KEY_MAP and ASCII_KEY_MAP instead of only the first |
| elements, when TO_KEY is NULL. |
| |
| 2000-10-16 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/boot.c (load_image): When handling Linux cmdline, don't |
| copy a null character from SRC to DEST, because this inserted an |
| extra null character into the cmdline. Reported by Robert |
| Bihlmeyer <robbe@orcus.priv.at>. |
| |
| 2000-10-16 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Some of the new Multiboot features are supported. APM support |
| and VESA support are not strictly defined or implemented yet. |
| |
| * docs/multiboot.texi (Top): Increase the version number. |
| (Boot information format): Changed the drive information format, |
| because it was not straightforward. |
| |
| * grub/asmstub.c (io_map): New variable. |
| (track_int13): New function. |
| (get_rom_config_table): Likewise. |
| * stage2/stage2.c (cmain): Set CONFIG_ENTRIES to MBI.DRIVES_ADDR |
| + MBI.DRIVES.LENGTH instead of MBI.MMAP_ADDR + MBI.MMAP_LENGTH. |
| * stage2/common.c (init_bios_info) [!STAGE1_5]: Added support |
| for drive info, ROM config table, and boot loader name features |
| of the Multiboot Specification. |
| * stage2/mb_info.h (drive_info): New structure. |
| (MB_DI_CHS_MODE): New macro. |
| (MB_DI_LBA_MODE): Likewise. |
| (multiboot_info): Added drives_length, drives_addr, |
| config_table, and boot_loader_name. |
| (MB_INFO_DRIVE_INFO): New macro. |
| (MB_INFO_CONFIG_TABLE): Likewise. |
| (MB_INFO_BOOT_LOADER_NAME): Likewise. |
| * stage2/asm.S (get_rom_config_table): New function. |
| * stage2/shared.h (get_rom_config_table): Declared. |
| |
| 2000-10-16 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in (convert): Check only if the file exists, |
| instead of checking if the file is a block device as well. |
| Because, in a sane operating system, it should be a char device |
| but not a block device (unlike Linux), and it may be a symbolic |
| link (this can happen if you use Linux's devfs without devfsd). |
| (recheck): New variable. Set to "no" by default, and set to |
| "yes", if you specify the new option ``--recheck''. If $recheck |
| is "yes", remove the device map file, if present. |
| |
| 2000-10-16 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Roderich Schupp: |
| * lib/device.c: Include <limits.h>. |
| [__linux__] (have_devfs): New function. |
| (get_floppy_disk_name) [__linux__]: If devfs is supported, use |
| the name "/dev/floppy/N" instead. |
| (init_device_map) [__linux__]: If devfs is supported, use |
| "/dev/discs/discN" instead. |
| [__linux__] (write_to_partition): Change the size of DEV to |
| PATH_MAX instead of 64. |
| If devfs is supported, replace "/disc" in the device name with |
| "/part". |
| |
| 2000-10-15 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Roderich Schupp <rsch@ExperTeam.de>: |
| * util/grub-install.in (convert): Added support for "native" |
| devfs device names. |
| |
| 2000-10-14 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/tutorial.texi (Serial terminal): Fixed a typo. |
| * docs/user-ref.texi (GRUB images): New chapter. |
| * docs/grub.texi: Added an entry for the chapter "GRUB images". |
| |
| 2000-10-14 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (setkey_func): If TO_KEY is NULL (i.e. the |
| user specifies no argument), clear BIOS_KEY_MAP and |
| ASCII_KEY_MAP. |
| If TO_KEY is non-NULL but FROM_KEY is NULL, set ERRNUM to |
| ERR_BAD_ARGUMENT and return one. |
| |
| 2000-10-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub.texi: Added an entry for the new chapter "Security", |
| and the order of the chapters in the Tutorial Manual was |
| changed. |
| * docs/tutorial.texi (Configuration): Moved to right after the |
| chapter "Booting". |
| (Security): New chapter. |
| |
| 2000-10-10 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Alessandro Rubini: |
| * util/grub-install.in (root_device): Use the regular expression |
| 's%.*\(/dev/[^ ]*\).*%\1%' instead of |
| 's%.*\(/dev/[a-z0-9]*\).*%\1%'. |
| (bootdir_device): Likewise. |
| (grubdir_device): Likewise. |
| |
| 2000-10-10 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/start.S (copy_buffer): Use pusha and popa instead of |
| pushing and poping %di and %si individually, to reduce the code |
| size and save %cx as well. Reported by Herbert Nachtnebel |
| <nachtneb@iaee.tuwien.ac.at>. |
| |
| 2000-10-10 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Daniel Pittman <daniel@rimspace.net>: |
| * stage2/builtins.c (setkey_func): Check if |
| KEYSYM_TABLE[I].UNSHIFTED_NAME and KEYSYM_TABLE[I].SHIFTED_NAME |
| are not NULLs, before calling grub_strcmp. |
| |
| 2000-10-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in (grub_prefix): New variable. The default |
| is "/boot/grub". |
| If the user has a separate boot partition, set grub_prefix |
| instead of grubdir to "/grub". |
| When running the command "setup", specify $grub_prefix instead |
| of $grubdir to the option "--prefix". |
| Report by Thierry Laronde. |
| |
| 2000-10-08 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (find_func): Clear ERRNUM after the last |
| call of next_partition, because it always sets ERRNUM. Reported |
| by Thierry Laronde <thierry.laronde@polynum.com>. |
| |
| 2000-10-07 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c [__linux__] (write_to_partition): Open DEV with |
| O_RDWR instead of O_ORONLY. |
| |
| 2000-10-06 Alessandro Rubini <rubini@gnu.org> |
| |
| * docs/user-ref.texi (Commands): Added missing commands and |
| reworded part of the text. |
| |
| * stage2/builtins.c (serial_func): Unswap the setting of "speed" |
| and "port". |
| |
| 2000-10-06 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (setup_func): Append "... " to the |
| messages when calling embed_func and install_func, and print |
| the result. |
| Don't jump to the label "fail", even when embed_func failed. |
| |
| 2000-10-05 Gordon Matzigkeit <gord@fig.org> |
| |
| * stage2/disk_io.c (real_open_partition): Make sure that buf_geom |
| corresponds to the current drive before using it. |
| |
| * lib/device.c (get_drive_geometry): Use fstat if the native |
| geometry methods fail, such as when the drive is mapped to a |
| regular file. |
| |
| * docs/tutorial.texi: Add `@kbd{...}' to examples in order to |
| differentiate between command output and characters the user |
| should type. |
| * docs/user-ref.texi: Likewise. |
| |
| 2000-10-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/grub.texi: Added an entry for the chapter "Serial |
| terminal". |
| * docs/tutorial.texi (Serial terminal): New chapter. |
| |
| 2000-10-04 Gordon Matzigkeit <gord@fig.org> |
| |
| * util/grub-image (VERSION): Fix version calculation to tolerate |
| `(GNU GRUB 0.5.96)'-style versions. |
| |
| * docs/grub.texi: Remove braces from `@unnumbered' sections so |
| that texi2html doesn't complain. |
| |
| * debian/rules: Build HTML documentation to appease the Debian |
| masses. |
| |
| 2000-10-04 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (reiserfs_mount): Compare PART_LENGTH |
| with SUPERBLOCK + (sizeof(super) >> SECTOR_BITS) instead of |
| sizeof(struct reiserfs_super_block). Reported by Jochen |
| Hoenicke. |
| |
| 2000-10-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (AM_INIT_AUTOMAKE): The version number is set to |
| 0.5.97. This version number is a dummy, as we will never release |
| 0.5.97 actually. |
| |
| 2000-10-01 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c [__linux__]: Don't include <linux/cdrom.h>. |
| [__linux__ && !CDROM_GET_CAPABILITY] (CDROM_GET_CAPABILITY): |
| Defined as 0x5331. |
| |
| 2000-10-01 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c (get_drive_geometry) [__GNU__]: Get the number of |
| total sectors by fstat. The rest are filled with arbitrary |
| values. |
| |
| 2000-09-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in (convert): The code for gnu* (i.e. |
| GNU/Hurd) was rewritten, since it didn't work for BSD |
| partitions. |
| Use "$tmp_disk *$" instead of "$tmp_disk" to get the drive name. |
| |
| 2000-09-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (reiserfs_mount): Check if the length |
| of the partition is less than the size of a super block, before |
| attempting to read the super block. |
| |
| * grub/asmstub.c (console_putchar) |
| [HAVE_LIBCURSES_H && REFRESH_IMMEDIATELY]: Call refresh, to ease |
| debugging. |
| |
| 2000-09-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Added two new commands, "partnew" and "parttype", based on the |
| patch by Stefan Ondrejicka <ondrej@idata.sk>: |
| * stage2/builtins.c (partnew_func): New function. |
| (builtin_partnew): New variable. |
| (parttype_func): New function. |
| (builtin_parttype): New variable. |
| (builtin_table): Added pointers to BUILTIN_PARTNEW and to |
| BUILTIN_PARTTYPE. |
| |
| 2000-09-29 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (find_func): New variable GOT_FILE is set to |
| one if FILENAME is found. Otherwise, it is set to zero. |
| Clear ERRNUM at the end in the loop for floppies, to ensure that |
| ERRNUM is cleared before examining hard disks. |
| Rewrite the loop for hard disks using next_partitions, so this |
| function now checks all partitions you have certainly. |
| If GOT_FILE is non-zero, set ERRNUM to ERR_FILE_NOT_FOUND and |
| return one. |
| |
| 2000-09-29 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/disk_io.c (check_BSD_parts): Removed. |
| (next_partition): New function. |
| (real_open_partition): Rewritten using next_partition. |
| (set_device) [!STAGE1_5]: Skip a comma in DEVICE, even when the |
| BSD partition is not specified. |
| [!STAGE1_5] (print_completions): Don't append ')' if the |
| partition is a PC slice which may have BSD partitions. Instead, |
| try to complete the command-line with possible partitions. |
| * stage2/shared.h (next_partition): Declared. |
| |
| 2000-09-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (--enable-serial): Changed to ... |
| (--disable-serial): ... this. Now the serial support is enabled |
| by default. |
| |
| 2000-09-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/char_io.c [!STAGE1_5] (get_cmdline) [!SUPPORT_SERIAL]: |
| Don't check if the terminal is dumb. If the terminal is console, |
| always use console functions. |
| * stage2/builtins.c [!SUPPORT_NETBOOT] (bootp_func): Undefined. |
| [!SUPPORT_NETBOOT] (builtin_bootp): Likewise. |
| [!GRUB_UTIL] (device_func): Likewise. |
| [!GRUB_UTIL] (builtin_device): Likewise. |
| [!SUPPORT_NETBOOT] (dhcp_func): Likewise. |
| [!SUPPORT_NETBOOT] (builtin_dhcp): Likewise. |
| [!GRUB_UTIL] (quit_func): Likewise. |
| [!GRUB_UTIL] (builtin_quit): Likewise. |
| [!SUPPORT_NETBOOT] (rarp_func): Likewise. |
| [!SUPPORT_NETBOOT] (builtin_rarp): Likewise. |
| [!SUPPORT_SERIAL] (serial_func): Likewise. |
| [!SUPPORT_SERIAL] (builtin_serial): Likewise. |
| [!SUPPORT_SERIAL] (terminal_func): Likewise. |
| [!SUPPORT_SERIAL] (builtin_terminal): Likewise. |
| [!SUPPORT_NETBOOT] (tftpserver_func): Likewise. |
| [!SUPPORT_NETBOOT] (builtin_tftpserver): Likewise. |
| (builtin_table) [!SUPPORT_NETBOOT]: Removed the pointers to |
| BUILTIN_BOOTP, BUILTIN_DHCP, BUILTIN_RARP, and |
| BUILTIN_TFTPSERVER. |
| (builtin_table) [!SUPPORT_SERIAL]: Removed the pointers to |
| BUILTIN_SERIAL and BUILTIN_TERMINAL. |
| (builtin_table) [!GRUB_UTIL]: Removed the pointers to |
| BUILTIN_DEVICE and BUILTIN_QUIT. |
| |
| 2000-09-26 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in (bootdir_device): New variable. If |
| $bootdir_device is not the same as $root_device, set root_device |
| and grubdir to $bootdir_device and "/grub", respectively. |
| Add --prefix=$grubdir into the command "setup". |
| |
| 2000-09-26 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Add --prefix=DIR to the command "setup". |
| |
| * stage2/builtins.c (setup_func): New nested function, |
| check_file checks if the file FILE exists. |
| Remove the prefix "/boot/grub" in STAGE1_5_MAP. |
| Don't hardcode "/boot/grub/stage1", "/boot/grub/stage2", or |
| "/boot/grub/menu.lst". Instead, check if ARG contains |
| "--prefix=", and if specified, set PREFIX to the value. |
| If not specified, check "/boot/grub/stage1" and, if not found, |
| check "/grub/stage1". If a stage1 was found, set PREFIX to the |
| directory which contains the stage1. |
| |
| 2000-09-12 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Add additional magic to avoid a bug in Linux. *sigh* |
| |
| * stage2/boot.c (load_image): Copy SRC to DEST first, and append |
| a "mem=" option to DEST instead of prepending. |
| |
| 2000-09-11 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Reported by Alessandro Rubini: |
| * stage2/fsys_minix.c (minix_mount): Check if CURRENT_SLICE is a |
| partition type for minix fs, using the macro |
| IS_PC_SLICE_TYPE_MINIX. |
| * stage2/pc_slice.h (PC_SLICE_TYPE_LINUX_MINIX): New macro. |
| (IS_PC_SLICE_TYPE_MINIX): Likewise. |
| |
| 2000-09-09 Alessandro Rubini <rubini@morgana.systemy.it> |
| |
| * stage1/stage1.S (notification_string): Print "GRUB " instead |
| of "stage1 ". |
| * stage2/start.S [STAGE1_5] (notification_string): Print |
| "Loading stage1.5" instead of "stage1.5 ". |
| [!STAGE1_5] (notification_string): Print "Loading stage2" |
| instead of "stage2 ". |
| (notification_step): New label, followed by a string ".". |
| (notification_done): New label, followed by a string "\r\n". |
| (copy_buffer): Print NOTIFICATION_STEP after copying the buffer. |
| (bootit): Print NOTIFICATION_DONE before restoring %dx. |
| |
| 2000-09-09 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Alessandro Rubini: |
| * configure.in (CPPFLAGS): Added -malign-jumps=1, |
| -malign-loops=1 and -malign-functions=1. |
| |
| 2000-09-07 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Hal Snyder <hal@vailsys.com>: |
| * lib/device.c (get_drive_geometry) [__FreeBSD__ || __NetBSD__ |
| || __OpenBSD__]: Call ioctl for FD instead of |
| DISKS[DRIVE].FLAGS. This was a mistake when I segregated this |
| function from asmstub.c. |
| |
| 2000-09-07 Alessandro Rubini <rubini@gnu.org> |
| |
| * docs/tutorial.texi: Fixed a few typos and minor imprecisions. |
| * docs/prog-ref.texi: Likewise. |
| * docs/user-ref.texi: Likewise. |
| |
| 2000-09-07 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Alessandro Rubini: |
| * stage2/builtins.c (terminal_func): Rename TIMEOUT to TO, to |
| suppress GCC warnings. |
| * grub/asmstub.c (serial_checkkey): Likewise. |
| |
| 2000-09-06 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/char_io.c [!STAGE1_5] (auto_fill): New variable. |
| [!STAGE1_5] (get_cmdline): Save AUTO_FILL in SAVED_AUTO_FILL in |
| the beginning and restore AUTO_FILL before return. |
| Set AUTO_FILL to one and zero before and after calling |
| print_completions, respectively. |
| (grub_putchar) [!STAGE1_5]: Use a static variable COL to track |
| the position of the cursor. If C is a carriage return, clear |
| COL. If C is a backspace and COL is positive, decrease COL. If C |
| is a printable character, increase COL. In this case, if |
| AUTO_FILL is non-zero and COL is greater than or equal to 79, |
| put a newline automatically. |
| * stage2/shared.h (auto_fill): Declared. |
| * stage2/stage2.c (run_menu): In the menu interface, disable the |
| auto fill mode (i.e. set AUTO_FILL to zero), and enable it again |
| when booting an entry. |
| (cmain): Initialize AUTO_FILL (i.e. set it to one) in the |
| beginning of the loop. |
| |
| 2000-09-06 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Add support for "boot previously booted entry by default", based |
| on the patch by Mike Meyer <mwm@mired.org>, but I've modified |
| his patch thoroughly. |
| |
| * grub/asmstub.c (saved_entryno): New variable. This is a dummy. |
| * stage1/stage1.h (COMPAT_VERSION_MINOR): Incremented. |
| * stage2/asm.S (saved_entryno): New variable. |
| (codestart) [!SUPPORT_DISKLESS]: Set INSTALL_SECOND_SECTOR to |
| %ebp. %ebp is set in start.S. |
| (install_second_sector): New variable. |
| * stage2/builtins.c (current_entryno): New variable. |
| (default_func) [!SUPPORT_DISKLESS]: If ARG is "saved", set |
| DEFAULT_ENTRY to SAVED_ENTRYNO. |
| (savedefault_func): New function. |
| (builtin_savedefault): New variable. |
| (builtin_table): Added a pointer to BUILTIN_SAVEDEFAULT. |
| * stage2/shared.h (STAGE2_SAVED_ENTRYNO): New macro. |
| (STAGE2_STAGE2_ID): Changed to 0x10. |
| (STAGE2_FORCE_LBA): Chaged to 0x11. |
| (STAGE2_VER_STR_OFFS): Changed to 0x12. |
| (install_second_sector): Declared. |
| (saved_entryno): Likewise. |
| (current_entryno): Likewise. |
| * stage2/stage2.c (run_menu): Set CURRENT_ENTRYNO to FIRST_ENTRY |
| + ENTRYNO, right before calling run_script. |
| * stage2/start.S (start): Save the sector number of the second |
| sector in %ebp. |
| |
| 2000-09-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage1/stage1.S (lba_mode) [!NO_BUGGY_BIOS_IN_THE_WORLD]: |
| Don't check for the geometry, since some BIOSes don't return the |
| number of total sectors correctly, even if they have working LBA |
| support. |
| * stage2/start.S (lba_mode) [!NO_BUGGY_BIOS_IN_THE_WORLD]: |
| Likewise. |
| * stage2/bios.c (biosdisk) [!NO_BUGGY_BIOS_IN_THE_WORLD]: |
| Likewise. |
| Reported by Jan Fricke <fricke@uni-greifswald.de> and Pixel |
| <pixel@mandrakesoft.com>. |
| |
| 2000-09-05 OKUJI Yoshinori <okuji@gnu.org> |
| |
| From Alessandro Rubini <rubini@gnu.org>: |
| * stage2/char_io.c (print_error) [!STAGE1_5]: Print ERRNUM like |
| "Error 9: Unknown boot failure". |
| (print_error) [STAGE1_5]: Don't print a colon. |
| * util/grub-install.in: When checking if an error occurred, use |
| the expression "Error [0-9]*: " instead of "Error: ". |
| * docs/user-ref.texi (Stage1.5 errors): Updated, since the error |
| form changed. |
| |
| 2000-09-04 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/stage2.c (run_menu) [GRUB_UTIL]: Set DISP_UP and |
| DISP_DOWN to ACS_UARROW and ACS_DARROW, respectively. Don't call |
| grub_printf here. |
| (run_menu) [!GRUB_UTIL]: Don't call grub_printf here. Instead, |
| call it... |
| (run_menu): ... here. |
| * stage2/shared.h (ACS_ULCORNER): Always define this ourselves, |
| whether your curses library has the definition. |
| (ACS_URCORNER): Likewise. |
| (ACS_LLCORNER): Likewise. |
| (ACS_LRCORNER): Likewise. |
| (ACS_HLINE): Likewise. |
| (ACS_VLINE): Likewise. |
| (ACS_LARROW): Likewise. |
| (ACS_RARROW): Likewise. |
| (ACS_UARROW): Likewise. |
| (ACS_DARROW): Likewise. |
| |
| * stage2/char_io.c [SUPPORT_SERIAL] (serial_cls): If the |
| terminal is dumb, just put a newline. |
| * stage2/builtins.c (terminal_func) [SUPPORT_SERIAL]: When |
| choosing a terminal, don't set TERMINAL to the type of the |
| terminal. Instead, apply a logical AND operation with |
| TERMINAL_DUMB, since previous code brushed off the dumb |
| attribute. |
| |
| 2000-09-04 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/stage2.c (run_menu): If SHOW_MENU is zero, print a |
| message with the timeout per second. |
| If GRUB_TIMEOUT is negative, set SHOW_MENU to one, since the |
| condition "no timeout and no interface" is nonsense. |
| If GRUB_TIMEOUT is equal to or greater than zero and the |
| terminal is dumb, set SHOW_MENU to zero. |
| If SHOW_MENU is non-zero and the terminal is dumb, enter the |
| command-line interface instead. If AUTH is false and PASSWORD is |
| non-NULL, prompt the user to enter a password until the entered |
| password is identical to PASSWORD. |
| |
| 2000-09-03 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * util/grub-install.in: Fix a typo: grub_dir -> grubdir. |
| * stage2/builtins.c (install_func) [GRUB_UTIL]: Open a Stage 2 |
| with "r+" instead of "r", as GRUB needs to overwrite it. |
| |
| 2000-09-02 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/stage2.c (run_menu): Don't use either `p' or `n' to |
| move the cursor, because `p' is already used for another |
| purpose (password). |
| (run_menu) [SUPPORT_SERIAL]: Don't set the variables DISP_UP and |
| DISP_DOWN at the start time. Instead, set them just before using |
| them actually, because TERMINAL may change when running a menu. |
| |
| 2000-09-01 Klaus Reichl <Klaus.Reichl@alcatel.at> |
| |
| * stage2/stage2.c (run_menu): Setup and use disp_up, disp_down |
| depending on the terminal mode. |
| (run_menu): Allow '^' (resp. 'p') and 'v' (resp 'n') keys we |
| described in our help above (resp. authors preferences). |
| |
| 2000-08-31 Klaus Reichl <Klaus.Reichl@alcatel.at> |
| |
| * stage2/stage2.c (set_line): Go back one char, which is |
| consistent with the original situation, when a timeout was |
| running. |
| (run_menu): If GRUB_TIMEOUT is stopped don't loop busy over |
| CHECKKEY, just relax in GETKEY. |
| |
| * stage2/builtins.c (serial_func): --speed handling: corrected |
| typo: set SPEED instead of PORT. |
| |
| 2000-08-31 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c (terminal_func): Added two new options, |
| --dumb and --timeout=SECS. |
| * stage2/char_io.c [!STAGE1_5] (getkey): Use logical AND |
| operations, when checking if the terminal is a console or a |
| serial terminal. |
| [!STAGE1_5] (getkey) [SUPPORT_SERIAL]: Don't check if both |
| TERMINAL_CONSOLE and TERMINAL_SERIAL are set in TERMINAL. |
| |
| 2000-08-31 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage1/stage1.S (MOV_MEM_TO_AL): New macro. |
| (real_start): Use the macro MOV_MEM_TO_AL instead of using movb |
| directly, because binutils-2.9.1.0.x doesn't produce a short |
| opcode for it automatically. Reported by Alessandro Rubini |
| <rubini@gnu.org>. |
| |
| 2000-08-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (CPPFLAGS): Remove -Wundef by default. Add the |
| option only if the C compiler supports it, because GCC 2.7.x |
| doesn't support it. |
| * grub/main.c (longopts): The type of the argument for "hold" is |
| changed to OPTIONAL_ARGUMENT. |
| (main): If --hold is specified, check if OPTARG is zero. If so, |
| set HOLD to -1, otherwise, set it to the digit OPTARG. |
| If HOLD is greater than zero, decrease it once per loop. |
| |
| 2000-08-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| The command-line interface is switched to single-line editing |
| mode. |
| |
| * stage2/char_io.c [!STAGE1_5] (get_cmdline): Extensively |
| rewritten. The nested functions cl_print and cl_kill_to_end are |
| removed, cl_refresh, cl_backward, cl_forward and cl_delete are |
| added, and, cl_init and cl_insert are rewritten from scratch. |
| See the source code, for more information. I don't think this |
| kind of changes can be represented in ChangeLog. |
| [!STAGE1_5] (CMDLINE_WIDTH): New macro. |
| [!STAGE1_5] (CMDLINE_MARGIN): Likewise. |
| * stage2/shared.h (TERMINAL_DUMB): Likewise. |
| |
| 2000-08-28 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * grub/asmstub.c (console_putchar) [HAVE_LIBCURSES]: If |
| USE_CURSES is true, emulate a new line like a ordinary terminal, |
| because ncurses treats it badly. If current position on y-axis |
| is the bottom of the screen, call scroll. Otherwise, call move |
| with the arguments, Y + 1 and X, where X and Y are current |
| position of the cursor. |
| |
| 2000-08-28 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/asm.S (console_putchar): Don't print a carriage return |
| when C is a newline. |
| * stage2/char_io.c (grub_putchar): Call grub_putchar with the |
| arugment set to a carriage return, if C is a newline. |
| [!STAGE1_5 && SUPPORT_SERIAL]: Don't print a carriage return |
| when C is a newline. |
| |
| 2000-08-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c [__linux__]: Don't include linux/fs.h. |
| [!BLKGETSIZE] (BLKGETSIZE): Defined as _IO(0x12,96). |
| * grub/asmstub.c [__linux__]: Don't include linux/fs.h. |
| |
| 2000-08-27 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Preserve a magic number used by Windows NT in a MBR. Shit! |
| Reported by Khimenko Victor. |
| |
| * stage1/stage1.h (STAGE1_WINDOWS_NT_MAGIC): New macro. |
| * stage1/stage1.S (copy_buffer): Use pusha and popa, instead of |
| pushing/poping %cx and %si separately, to reduce the code size. |
| (nt_magic): New label. Set the offset to _start plus |
| STAGE1_WINDOWS_NT_MAGIC |
| (part_start): New label. |
| * stage2/builtins.c (install_func): If DEST_DRIVE is a hard |
| disk, copy the possible partition table and Windows NT magic to |
| STAGE1_BUFFER from OLD_SECT. |
| |
| 2000-08-26 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/char_io.c (translate_keycode) [SUPPORT_SERIAL]: Don't |
| drain the input buffer, since that was irritating. |
| |
| 2000-08-26 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Don't save/restore fragile registers unnecessarily. |
| |
| * stage2/asm.S [!STAGE1_5] (track_int13): Don't save/restore |
| %ecx, %edx, or %eax. |
| [!STAGE1_5] (set_int13_handler): Likewise. |
| (biosdisk_int13_extensions): Likewise. |
| (biosdisk_standard): Likewise. |
| (check_int13_extensions): Likewise. |
| (get_diskinfo_int13_extensions): Likewise. |
| (get_diskinfo_standard): Likewise. |
| (get_diskinfo_floppy): Likewise. |
| [!STAGE1_5] (get_eisamemsize): Likewise. |
| [!STAGE1_5] (get_mmap_entry): Likewise. |
| [!STAGE1_5] (console_cls): Likewise. |
| [!STAGE1_5] (nocursor): Likewise. |
| [!STAGE1_5] (console_getxy): Likewise. |
| [!STAGE1_5] (console_gotoxy): Likewise. |
| [!STAGE1_5] (set_attrib): Likewise. |
| [!STAGE1_5] (getrtsecs): Likewise. |
| [!STAGE1_5] (currticks): Likewise, and don't zero %eax |
| explicitly, since prot_to_real does that. |
| |
| 2000-08-25 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/char_io.c [!STAGE1_5] (translate_keycode): New |
| function. The serial part is stolen from the patch by Christoph |
| Plattner. |
| [!STAGE1_5] (get_cmdline): Call translate_keycode instead of |
| translating special key codes into ASCII characters by itself. |
| * stage2/stage2.c (run_menu): Wrap getkey with the macro |
| ASCII_CHAR, when checking if ESC is pressed. |
| Call translate_keycode as well as getkey, unless checkkey |
| returns -1. So don't check if C is KEY_DOWN or KEY_UP. And don't |
| use the macro ASCII_CHAR for C explicitly. |
| * stage2/shared.h (translate_keycode): Declared. |
| |
| 2000-08-24 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c [GRUB_UTIL]: Include stdio.h before |
| shared.h. Reported by Mathieu Chouquet-Stringer |
| <mchouque@cs.stevens-tech.edu>. |
| |
| 2000-08-21 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (--enable-serial-speed-emulation): New option. |
| (SERIAL_SPEED_SIMULATION): New conditional. |
| * grub/Makefile.am (SERIAL_FLAGS): New variable. Set |
| -DSUPPORT_SERIAL=1 and -DSIMULATE_SLOWNESS_OF_SERIAL=1, if |
| SERIAL_SPEED_SIMULATION is defined, otherwise, set it to |
| only -DSUPPORT_SERIAL=1. |
| (AM_CFLAGS): Removed -DSUPPORT_SERIAL=1 and added |
| $(SERIAL_FLAGS). |
| * grub/asmstub.c [SIMULATE_SLOWNESS_OF_SERIAL] (serial_speed): |
| New variable. |
| (grub_setjmp): Removed. |
| (grub_longjmp): Likewise. |
| (serial_getkey) [SIMULATE_SLOWNESS_OF_SERIAL]: Wait for |
| 1000000 / (SERIAL_SPEED >> 3) microseconds using gettimeofday. |
| (serial_putchar) [SIMULATE_SLOWNESS_OF_SERIAL]: Likewise. |
| (serial_init) [SIMULATE_SLOWNESS_OF_SERIAL]: Set SERIAL_SPEED to |
| SPEED. |
| * stage2/builtins.c (serial_func) [SUPPORT_SERIAL]: Added |
| a new option, `--speed'. |
| (builtin_serial): Added a description about --speed. |
| (terminal_func): When get a key from a serial device, if GRUB is |
| in the command-line interface, call grub_longjmp with |
| RESTART_CMDLINE_ENV, instead of init_page. |
| * stage2/cmdline.c (restart_cmdline_env): New variable. |
| (enter_cmdline): Call grub_setjmp with RESTART_CMDLINE_ENV after |
| calling init_cmdline. |
| (run_script): Run BUILTIN->FUNC with BUILTIN_SCRIPT instead of |
| BUILTIN_CMDLINE. |
| * stage2/shared.h (BUILTIN_SCRIPT): New macro. |
| [GRUB_UTIL] (grub_setjmp): Defined as setjmp. |
| [GRUB_UTIL] (grub_longjmp): Defined as longjmp. |
| (restart_cmdline_env): Declared. |
| |
| 2000-08-20 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (--enable-serial): New option. Serial terminal |
| support will be enabled by default, once it is stabilized. |
| (SERIAL_SUPPORT): New conditional. |
| * grub/Makefile.am (AM_CFLAGS): Added -DSUPPORT_SERIAL=1. |
| * grub/asmstub.c (cls): Renamed to ... |
| (console_cls): ... this. |
| (getxy): Renamed to ... |
| (console_getxy): ... this. |
| (gotoxy): Renamed to ... |
| (console_gotoxy): ... this. |
| * stage2/Makefile.am (libgrub_a_CFLAGS): Added |
| -DSUPPORT_SERIAL=1. |
| (NETBOOT_FLAGS): New variable. |
| (SERIAL_FLAGS): Likewise. |
| (STAGE2_COMPILE): Added $(NETBOOT_FLAGS) and $(SERIAL_FLAGS). |
| * stage2/asm.S [!STAGE1_5] (cls): Renamed to ... |
| [!STAGE1_5] (console_cls): ... this. |
| [!STAGE1_5] (getxy): Renamed to ... |
| [!STAGE1_5] (console_getxy): ... this. |
| [!STAGE1_5] (gotoxy): Renamed to ... |
| [!STAGE1_5] (console_gotoxy): ... this. |
| * stage2/builtins.c (terminal_func): If the bit flag |
| BUILTIN_CMDLINE in FLAGS is set, call init_page. But this should |
| be fixed so that it restarts enter_cmdline instead. |
| * stage2/char_io.c [!STAGE1_5] (gotoxy): New function. |
| [!STAGE1_5] (serial_gotoxy): Likewise. |
| [!STAGE1_5] (getxy): Likewise. |
| [!STAGE1_5] (serial_getxy): Likewise. |
| [!STAGE1_5] (cls): Likewise. |
| [!STAGE1_5] (serial_cls): Likewise. |
| * stage2/serial.h (serial_cls): Declared. |
| (serial_getxy): Likewise. |
| (serial_gotoxy): Likewise. |
| * stage2/shared.h (console_cls): Likewise. |
| (console_getxy): Likewise. |
| (console_gotoxy): Likewise. |
| * stage2/stage2.c (print_entries): If serial terminal is |
| enabled, print ACS_UARROW and ACS_DARROW instead of DISP_UP and |
| DISP_DOWN, respectively. |
| (print_border): If serial terminal is enabled, print |
| ACS_ULCORNER, ACS_URCORNER, ACS_LLCORNER, ACS_LRCORNER, |
| ACS_HLINE and ACS_VLINE instead of DISP_UL, DISP_UR, DISP_LL, |
| DISP_LR, DISP_HORIZ and DISP_VERT, respectively. |
| (print_border) [SUPPORT_SERIAL]: Color the menu only if console |
| is used. |
| (set_line): Take two more arguments, ENTRYNO and MENU_ENTRIES. |
| (set_line_normal): Likewise. |
| (set_line_highlight): Likewise. |
| (set_line) [SUPPORT_SERIAL]: If serial terminal is enabled, get |
| the menu entry whose attributes are being changed and redraw the |
| line. |
| (set_line_highlight) [SUPPORT_SERIAL]: If serial terminal is |
| enabled, print `ESC [ 7 m' and `ESC [ 0 m' before and after |
| calling set_line, respectively. |
| (run_menu) [SUPPORT_SERIAL]: Call nocursor only if console is |
| used. |
| |
| 2000-08-20 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Now the serial console support is partially working. |
| |
| * grub/asmstub.c (serial_checkkey): Specify a pointer to TIMEOUT |
| as the fifth argument to select. |
| (serial_get_port): New function. Just a dummy. |
| (serial_init): If a serial device is opened, close SERIAL_FD |
| before opeing a new serial device. |
| Don't specify O_NDELAY to open. |
| * stage2/builtins.c [SUPPORT_SERIAL]: Include serial.h. |
| (serial_func): New function. |
| (builtin_serial): New variable. |
| (terminal_func): New function. |
| (builtin_terminal): New variable. |
| (builtin_table): Add pointers to BUILTIN_SERIAL and |
| BUILTIN_TERMINAL. |
| * stage2/char_io.c [SUPPORT_SERIAL]: Include serial.h. |
| (getkey) [SUPPORT_SERIAL]: If both TERMINAL_CONSOLE and |
| TERMINAL_SERIAL are set in TERMINAL simultaneously, print a |
| warning and force the console terminal. |
| (checkkey) [SUPPORT_SERIAL]: If TERMINAL_SERIAL is set in |
| TERMINAL, call serial_checkkey. |
| (grub_putchar) [SUPPORT_SERIAL]: If TERMINAL_SERIAL is set in |
| TERMINAL, call serial_putchar. If C is a newline, print a |
| carriage return, before printing a newline. |
| |
| 2000-08-15 OKUJI Yoshinori <okuji@gnu.org> |
| |
| The image `nbgrub' now relocates itself from 0x10000 to 0x8000, |
| since the Network Boot Image Proposal doesn't permit a second |
| loader to be loaded below 0x10000. Reported by Matthias |
| Kretschmer <McCratch@gmx.net>. |
| |
| * Makefile.am (NBLOADER_LINK): New variable. |
| (nbloader_exec_LDFLAGS): Set to $(NBLOADER_LINK) instead of |
| $(START_LINK). |
| * stage2/nbi.h (NBI_DEST_ADDR): Changed to 0x10000. |
| (NBI_DEST_SEG): New macro. |
| (NBI_DEST_OFF): Likewise. |
| (RELOCATED_ADDR): Likewise. |
| (RELOCATED_SEG): Likewise. |
| (RELOCATED_OFF): Likewise. |
| (STAGE2_START_ADDR): Likewise. |
| * stage2/nbloader.S: Added .code16 directive at the start of the |
| code. |
| Set the segment and the offset of the load address to |
| NBI_DEST_SEG and NBI_DEST_OFF, respectively. |
| Set the segment and the offset of the start address to |
| NBI_DEST_SEG and NBI_DEST_OFF + relocate - _start, respectively. |
| Added a routine for relocating itself. |
| (relocate): New label. |
| (copy_rest): Likewise. |
| (copy_loop): Likewise. |
| (copy): Likewise. |
| (boot_stage2): Likewise. |
| |
| 2000-08-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * grub/main.c (main): Move the version number inside the |
| parentheses, since the grub shell is merely one of the programs |
| included in GNU GRUB. |
| |
| 2000-08-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Add a serial device emulation into the grub shell. |
| |
| * grub/asmstub.c: Include sys/time.h and termios.h. |
| (serial_fd): New variable. |
| (serial_device): Likewise. |
| (serial_getkey): New function. |
| (serial_checkkey): Likewise. |
| (serial_putchar): Likewise. |
| (get_termios_speed): Likewise. |
| (serial_init): Likewise. |
| (set_serial_device): Likewise. |
| (grub_stage2): Restore SERIAL_DEVICE and SERIAL_FD, if they were |
| allocated. |
| * stage2/serial.h [GRUB_UTIL] (set_serial_device): Declared. |
| |
| 2000-08-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/asm.S (codestart) [SUPPORT_DISKLESS]: Don't reset a |
| disk system. That is not only uncessary but also harmful. |
| |
| 2000-08-12 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Add a serial device driver (but only the driver). |
| |
| * stage2/serial.c: New file. |
| * stage2/serial.h: Likewise. |
| * stage2/shared.h (serial_getkey): Moved to stage2/serial.h. |
| (serial_checkkey): Likewise. |
| (serial_putchar): Likewise. |
| * stage2/Makefile.am (noinst_HEADERS): Added serial.h. |
| (pre_stage2_exec_SOURCES): Added serial.c. |
| |
| 2000-08-10 Pavel Roskin <proski@gnu.org> |
| |
| * docs/tutorial.texi: Minor fixes. |
| |
| 2000-08-10 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/tutorial.texi (Installation): Divided into three sections |
| instead of two sections. Don't describe the usage of the the |
| grub shell any longer. Instead, how to use grub-install is |
| documented. |
| |
| 2000-08-09 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/builtins.c [GRUB_UTIL]: Include stdio.h. |
| (embed_func) [GRUB_UTIL && __linux__]: When embedding a Stage |
| 1.5 into a partition, call write_to_partition instead of |
| biosdisk. |
| (install_func): Set DEST_PARTITION to the partition where Stage |
| 1 resides. |
| Set SRC_PART_START to the starting address of the partition |
| where Stage 2 resides. |
| (install_func) [GRUB_UTIL]: Set STAGE2_OS_FILE to the file name |
| of Stage 2 under an OS, if the new option "--stage2" is |
| specified. Otherwise, set it to null. |
| If STAGE2_OS_FILE is not null, modify the Stage 2 via the |
| filesystem serviced by the OS. |
| (install_func) [GRUB_UTIL && __linux__]: If STAGE2_OS_FILE is |
| null but the Stage2 resides in a partition, use |
| write_to_partition. |
| If DEST_PARTITION is not 0xFFFFFF, use write_to_partition, to |
| embed Stage 1. |
| (setup_func) [GRUB_UTIL]: If --stage2 is specified, set |
| STAGE2_ARG to the string pointing to the option. Otherwise, set |
| it to null. |
| (setup_func) [!GRUB_UTIL]: Set STAGE2_ARG to null. |
| (setup_func): If STAGE2_ARG is not null, add STAGE2_ARG and a |
| space character into CMD_ARG. |
| * lib/device.c (_LARGEFILE_SOURCE): Defined. |
| (_FILE_OFFSET_BITS): Likewise. |
| [__linux__] (write_to_partition): New function. |
| * lib/device.h [__linux__] (write_to_partition): Declared. |
| * util/grub-install.in: Specify the option "--stage2" for the |
| command "setup". |
| |
| 2000-08-04 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_fat.c (fat_superblock): clust_eof_marker added. |
| (fat_mount): Initialize clust_eof_marker to 0xff8, 0xfff8, or |
| 0xffffff8, depending on fat size. Support for single active FAT |
| added (FAT32 extension). Changed the boundary between FAT12 and |
| FAT16, again. The Microsoft KB article Q65541 seems to be wrong |
| here, I go with mtools and the previous behaviour of grub: FAT12 |
| iff number of clusters (without counting the two nonexisting |
| clusters) is less or equal 4095. |
| (fat_read): Report error if cluster number is too big, but not |
| greater or equal clust_eof_marker. |
| * stage2/fsys_reiserfs.c (journal_init): Fixed calculation of |
| journal_transaction. |
| |
| 2000-08-01 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c: Symlink support added. |
| (S_ISLNK): New macro. |
| (PATH_MAX): Likewise. |
| (MAX_LINK_COUNT): Likewise. |
| (reiserfs_dir): Check for symlink and handle them. |
| (read_tree_node): Take a block number and check if tree node was |
| already read in. If not update the INFO->blocks field. |
| (next_key): Changed call of read_tree_node. |
| (search_stat): Likewise. |
| (journal_init): Fixed a small bug. Some debugging messages added. |
| |
| 2000-07-31 Pavel Roskin <proski@gnu.org> |
| |
| * grub/asmstub.c (biosdisk) [__linux__]: The first argument for |
| _llseek renamed from "seeked_fd" to "filedes". |
| |
| 2000-07-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/appendices.texi (FAQ): Added the answer for the separate |
| boot partition problem. |
| |
| 2000-07-30 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Update the network support to Etherboot-4.6.4. |
| |
| From Daniel Wagner <wagi@gmx.ch>: |
| * netboot/3c509.c: Copied from Etherboot-4.6.4. |
| * netboot/3c509.h: Likewise. |
| * netboot/cards.h: Likewise. |
| * netboot/ns8390.c: Likewise. |
| * netboot/sk_g16.c: Likewise. |
| * netboot/sk_g16.h: Likewise. |
| * netboot/tulip.c: Likewise. |
| * netboot/pci.h: Likewise. |
| * netboot/main.c (dhcpdiscover): Updated. |
| (dhcprequest): Likewise. |
| (bootp): Likewise. |
| * netboot/README.netboot: Added the information about the new |
| option --enable-ns8390-force-16bit. |
| * configure.in (--enable-ns8390-force-16bit): New option. |
| |
| * netboot/config.c: Updated. |
| |
| 2000-07-29 OKUJI Yoshinori <okuji@gnu.org> |
| |
| The Linux zImage support is working now. |
| |
| * stage2/asm.S (linux_boot): Add 3 into %ecx and shift %ecx to |
| the right by 2 bits, instead of shift %ecx to the left by 2 |
| bits. |
| |
| 2000-07-29 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_reiserfs.c (block_read): Changed the variable "len" |
| to "j_len" (it shadowed a parameter). |
| |
| 2000-07-29 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * configure.in (CPPFLAGS): Added -Wshadow, -Wpointer-arith and |
| -Wundef, as GCC sometimes more clever than me. :) |
| * stage2/shared.h [!ASM_FILE] (multi_boot): Change the name of |
| the second argument from "mbi" to "mb_info". |
| [!ASM_FILE] (biosdisk): Rename the first argument "read" to |
| "subfunc". |
| * lib/device.h (init_device_map): Change the name of the third |
| argument from "floppy_disks" to "no_floppies". |
| * lib/device.c (read_device_map): Rename the internal function |
| "print_error" to "show_error". |
| * stage2/builtins.c (install_func): Rename CONFIG_FILE to |
| REAL_CONFIG. |
| (setup_func): Rename INSTALL_DRIVE, INSTALL_PARTITION and |
| CONFIG_FILE to INSTALLED_DRIVE, INSTALLED_PARTITION and |
| CONFIG_FILENAME, respectively. |
| * stage2/char_io.c (convert_to_ascii): Rename the internal |
| variable C to TMP. |
| (get_cmdline): Rename KILL to KILL_BUF. |
| Rename the second argument for cl_print to REAL_ECHO_CHAR from |
| ECHO_CHAR. |
| * stage2/stage2.c (run_menu): Rename the internal variable |
| NUM_ENTRIES to NEW_NUM_ENTRIES. |
| (cmain): Rename KILL to KILL_BUF. |
| * stage2/disk_inode_ffs.h: Check if BYTE_MSF is defined before |
| checking the value. |
| * stage2/fsys_ext2fs.c (ext2fs_dir): Check if E2DEBUG is |
| defined, instead of if the value is non-zero. |
| * grub/asmstub.c: Check if __GLIBC__ is defined before checking |
| the value. |
| (biosdisk) [__linux__]: Likewise. |
| Rename the first argument for _llseek to "seeked_fd" from "fd". |
| (multi_boot): Rename the second argument to "mb_info" from |
| "mbi". |
| |
| 2000-07-27 Gordon Matzigkeit <gord@fig.org> |
| |
| * util/grub-image.in: Initial cut at a script for creating GRUB |
| boot images. |
| * util/Makefile.am (noinst_SCRIPTS): Added grub-image. |
| * configure.in (AC_OUTPUT): Added util/grub-image. |
| |
| 2000-07-27 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/asm.S (check_int13_extensions): Fixed the effect of |
| the --force-lba switch in stage2/stage1_5. |
| |
| 2000-07-25 Jochen Hoenicke <jochen@gnu.org> |
| |
| * stage2/fsys_fat.c (fat_mount): Fixed calculation of num_clust. |
| It was off by two, since the two non existing clusters 0 and 1 |
| were not taken into account. Also fixed the boundary between |
| FAT12 and FAT16. |
| |
| 2000-07-25 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/asm.S [!STAGE1_5] (linux_text_len): New variable. |
| [!STAGE1_5] (linux_boot): Don't set %eax to LINUX_SETUP |
| meaninglessly. |
| Set %ecx to LINUX_TEXT_LEN instead of LINUX_KERNEL_MAXLEN. |
| [!STAGE1_5] (big_linux_boot): Disable interrupts before changing |
| the stack pointer. |
| Change %ss right before %sp. |
| Reverse the arguments for ljmp. A segment must be after an |
| offset. *sigh* |
| * stage2/boot.c (load_image): Set LINUX_TEXT_LEN to TEXT_LEN, |
| if a Linux kernel is loaded successfully. |
| * stage2/shared.h (LINUX_VID_MODE_OFFSET): Removed. |
| [!ASM_FILE] (linux_kernel_header): Change the type of the member |
| `heap_end_ptr' to unsigned short. |
| [!ASM_FILE] (linux_text_len): Declared. |
| |
| 2000-07-24 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Comply with the Linux/i386 boot protocol version 2.02. |
| |
| * stage2/asm.S [!STAGE1_5] (linux_boot): Set the length of moved |
| bytes to LINUX_KERNEL_MAXLEN instead of |
| LINUX_KERNEL_LEN_OFFSET(%eax), since the field is obsolete. |
| [!STAGE1_5] (big_linux_boot): Don't use SEGMENT or OFFSET. |
| Instead, embed the segment and the offset in the code itself. |
| Set %ds, %es, %fs and %gs to %ax (LINUX_INIT_SEG). |
| * stage2/boot.c (load_image): Rewrite the Linux support code |
| heavily. Use a structure instead of a batch of macros, to access |
| a Linux kernel header. |
| (load_initrd): If MOVETO plus LEN is greater than or equal to |
| LINUX_INITRD_MAX_ADDRESS, set MOVETO to LINUX_INITRD_MAX_ADDRESS |
| minus LEN with page aligned. |
| * stage2/shared.h (LINUX_MAGIC_SIGNATURE): New macro. |
| (LINUX_DEFAULT_SETUP_SECTS): Likewise. |
| (LINUX_FLAG_CAN_USE_HEAP): Likewise. |
| (LINUX_INITRD_MAX_ADDRESS): Likewise. |
| (LINUX_MAX_SETUP_SECTS): Likewise. |
| (LINUX_BOOT_LOADER_TYPE): Likewise. |
| (LINUX_HEAP_END_OFFSET): Likewise. |
| (LINUX_SETUP_MAXLEN): Removed. |
| (LINUX_KERNEL_LEN_OFFSET): Likewise. |
| (LINUX_SETUP_LEN_OFFSET): Likewise. |
| (LINUX_SETUP_STACK): Set to 0x7F00 instead of 0x3FF4 (why was it |
| this value?). |
| (LINUX_SETUP_LOADER): Removed. |
| (LINUX_SETUP_LOAD_FLAGS): Likewise. |
| (LINUX_SETUP_CODE_START): Likewise. |
| (LINUX_SETUP_INITRD): Likewise. |
| (CL_MY_LOCATION): Set to RAW_ADDR(0x97F00) instead of |
| RAW_ADDR(0x92000). |
| (CL_MY_END_ADDR): Set to RAW_addr(0x97FFF) instead of |
| RAW_ADDR(0x920FF). |
| (CL_MAGIC_ADDR): Removed. |
| (CL_OFFSET): Likewise. |
| [!ASM_FILE] (struct linux_kernel_header): New structure tag. |
| |
| 2000-07-23 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/tutorial.texi: Fix some syntax errors and ambiguous |
| sentences. Suggested by M. Meiarashi <mes@st.rim.or.jp>. |
| |
| 2000-07-14 Khimenko Victor <grub@khim.sch57.msk.ru> |
| |
| * stage2/boot.c (load_image): When getting the text length of a |
| Linux kernel, use unsigned long instead of unsigned short. |
| |
| 2000-07-13 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * lib/device.c: Include errno.h. Reported by Thierry DELHAISE |
| <thierry.delhaise@delhaise.com>. |
| |
| 2000-07-12 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Just to start implementing serial console support... |
| |
| * stage2/asm.S (grub_putchar): Renamed to ... |
| (console_putchar): ... this. |
| [!STAGE1_5] (getkey): Renamed to ... |
| [!STAGE1_5] (console_getkey): ... this. |
| [!STAGE1_5] (checkkey): Renamed to ... |
| [!STAGE1_5] (console_checkkey): ... this. |
| * stage2/char_io.c [!STAGE1_5] (getkey): New function. |
| [!STAGE1_5] (checkkey): Likewise. |
| (grub_putchar): Likewise. |
| * stage2/shared.h [!STAGE1_5] (terminal): Declared. |
| [!STAGE1_5] (TERMINAL_CONSOLE): New macro. |
| [!STAGE1_5] (TERMINAL_SERIAL): Likewise. |
| (console_putchar): Declared. |
| (serial_putchar): Likewise. |
| (console_getkey): Likewise. |
| (serial_getkey): Likewise. |
| (console_checkkey): Likewise. |
| (serial_checkkey): Likewise. |
| * stage2/builtins.c (terminal): New global variable. The default |
| is TERMINAL_CONSOLE. |
| * grub/asmstub.c (grub_putchar): Renamed to ... |
| (console_putchar): ... this. |
| (getkey): Renamed to ... |
| (console_getkey): ... this. |
| (checkkey): Renamed to ... |
| (console_checkkey): ... this. |
| |
| 2000-07-12 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/Makefile.am (libgrub_a_CFLAGS): Added |
| -I$(top_srcdir)/lib. |
| * stage2/builtins.c [GRUB_UTIL]: Include device.h. |
| |
| 2000-07-12 OKUJI Yoshinori <okuji@gnu.org> |
| |
| Segreate OS-specific helper functions from asmstub.c. |
| |
| * grub/asmstub.c [__linux__]: Don't include linux/hdreg.h, |
| linux/major.h, linux/kdev_t.h, or linux/cdrom.h. |
| [__FreeBSD__ || __NetBSD__ || __OpenBSD__]: Don't include |
| sys/ioctl.h, sys/disklabel.h, or sys/ioctl.h. |
| [HAVE_OPENDISK]: Don't include util.h. |
| Include device.h. |
| (DEFAULT_FD_CYLINDERS): Removed. |
| (DEFAULT_FD_HEADS): Likewise. |
| (DEFAULT_FD_SECTORS): Likewise. |
| (DEFAULT_HD_CYLINDERS): Likewise. |
| (DEFAULT_HD_HEADS): Likewise. |
| (DEFAULT_HD_SECTORS): Likewise. |
| (NUM_DISKS): Likewise. |
| (init_device_map): Likewise. |
| (get_floppy_disk_name): Likewise. |
| (get_ide_disk_name): Likewise. |
| (get_scsi_disk_name): Likewise. |
| (check_device): Likewise. |
| (get_drive_geometry): Likewise. |
| * grub/main.c (no_floppy): Removed. |
| (probe_second_floppy): Likewise. |
| (floppy_disks): New global variable. |
| (main): Set FLOPPY_DISKS to zero, if OPT_NO_FLOPPY. Set |
| FLOPPY_DISKS to two, if OPT_PROBE_SECOND_FLOPPY. |
| * lib/Makefile.am (AM_CFLAGS): New variable. |
| * lib/device.h: New file. |
| * lib/device.c: Likewise. |
| * stage2/shared.h (no_floppy): Removed. |
| (probe_second_floppy): Likewise. |
| (check_device): Likewise. |
| (floppy_disks): Declared. |
| |
| 2000-07-02 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * grub/main.c (usage): Enclose the mail address with parentheses |
| and add a period into the end of the line. That's just a |
| cosmetic change. |
| |
| 2000-07-02 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/appendices.texi (Obtaining and Building GRUB): Indicate |
| the Cygnus's binutils webpage instead of the hjl's site, since |
| you can now use a public release (i.e. 2.10). |
| |
| 2000-06-23 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/boot.c (load_image): Take an additional argument |
| LOAD_FLAGS. |
| If the kernel type is Linux and the bit |
| KERNEL_LOAD_NO_MEM_OPTION in LOAD_FLAGS is set, don't pass a |
| Linux's mem option automatically. |
| * stage2/shared.h (load_image): Added the new argument. |
| * stage2/builtins.c (kernel_func): If `--no-mem-option' is |
| specified, set the bit KERNEL_LOAD_NO_MEM_OPTION in LOAD_FLAGS, |
| otherwise, LOAD_FLAGS is zero. |
| |
| 2000-06-22 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/tutorial.texi: Fixed some typos and syntax errors. |
| * docs/user-ref.texi: Likewise. |
| |
| 2000-06-21 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/stage2.c (run_menu): Initialize CUR_ENTRY at the |
| definition. |
| If SHOW_MENU is zero, don't display the menu interface. Instead, |
| wait until the timeout is expired and then boot the default |
| entry. If the user presses `ESC' during the timeout, set |
| SHOW_MENU to one and break the loop. |
| Display the menu if SHOW_MENU is true, instead of if |
| GRUB_TIMEOUT is non-zero. |
| Set SHOW_MENU to one before go to the label `restart'. |
| * stage2/builtins.c (show_menu): New global variable. |
| (hiddenmenu_func): New function. |
| (builtin_hiddenmenu): New variable. |
| (builtin_table): Added a pointer to BUILTIN_HIDDENMENU. |
| * stage2/shared.h (show_menu): Declared. |
| |
| 2000-06-19 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/mdate-sh: Moved to ... |
| * mdate-sh: ... here. |
| * docs/texinfo.tex: Moved to ... |
| * texinfo.tex: ... here. |
| |
| 2000-06-09 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/mb_info.h (AddrRangeDesc): Use one 64bits field instead |
| of two 32bits fields for BaseAddr and Length, respectively. |
| BaseAddrLow + BaseAddrHigh -> BaseAddr, LengthLow + LengthHigh |
| -> Length. |
| * stage2/builtins.c (displaymem_func): Print BaseAddr >> 32, |
| BaseAddr & 0xFFFFFFFF, Length >> 32 and Length & 0xFFFFFFFF, |
| instead of BaseAddrLow, BaseAddrHigh, LengthLow and LengthHigh, |
| for MAP. |
| * stage2/common.c (fakemap): Adjusted to the new definition of |
| AddrRangeDesc. |
| (mmap_avail_at): Change the type of TOP to unsigned long long. |
| If TOP is greater than 0xFFFFFFFF, set it to 0xFFFFFFFF, since |
| GRUB itself cannot deal with 64bits addresses at the moment. |
| (init_bios_info): When getting a maximum available address from |
| the memory map, use a new unsigned long long variable MAX_ADDR |
| as the temporary variable instead of MEMTMP. This should allow |
| GRUB to detect at most 4TB. |
| |
| 2000-06-18 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * docs/appendices.texi (FAQ): Added an question about Linux's |
| `mem=' option and the answer. |
| |
| 2000-06-17 OKUJI Yoshinori <okuji@gnu.org> |
| |
| * stage2/boot.c (load_image): Pass a mem option to Linux, only |
| if SRC has no substring "mem=". |
| |
| 2000-06-17 OKUJI Yoshinori <okuji@gnu.org> |
|
