| # Copyright 1999-2015 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Id$ |
| |
| EAPI=5 |
| |
| PYTHON_COMPAT=( python2_7 ) |
| |
| inherit eutils linux-info linux-mod python-single-r1 systemd autotools |
| |
| DESCRIPTION="Production quality, multilayer virtual switch" |
| HOMEPAGE="http://openvswitch.org" |
| SRC_URI="http://openvswitch.org/releases/${P}.tar.gz" |
| |
| LICENSE="Apache-2.0 GPL-2" |
| SLOT="0" |
| KEYWORDS="~amd64 ~x86" |
| IUSE="debug modules monitor +ssl" |
| |
| RDEPEND=">=sys-apps/openrc-0.10.5 |
| ssl? ( dev-libs/openssl:= ) |
| monitor? ( |
| ${PYTHON_DEPS} |
| dev-python/twisted-core |
| dev-python/twisted-conch |
| dev-python/twisted-web |
| dev-python/PyQt4[${PYTHON_USEDEP}] |
| dev-python/zope-interface[${PYTHON_USEDEP}] ) |
| debug? ( dev-lang/perl )" |
| DEPEND="${RDEPEND} |
| virtual/pkgconfig" |
| |
| CONFIG_CHECK="~NET_CLS_ACT ~NET_CLS_U32 ~NET_SCH_INGRESS ~NET_ACT_POLICE ~IPV6 ~TUN" |
| MODULE_NAMES="openvswitch(net:${S}/datapath/linux)" |
| BUILD_TARGETS="all" |
| |
| pkg_setup() { |
| if use modules ; then |
| CONFIG_CHECK+=" ~!OPENVSWITCH" |
| kernel_is ge 2 6 32 || die "Linux >= 2.6.32 and <= 4.0 required for userspace modules" |
| kernel_is le 4 0 || die "Linux >= 2.6.32 and <= 4.0 required for userspace modules" |
| linux-mod_pkg_setup |
| else |
| CONFIG_CHECK+=" ~OPENVSWITCH" |
| linux-info_pkg_setup |
| fi |
| use monitor && python-single-r1_pkg_setup |
| } |
| |
| src_prepare() { |
| # Never build kernelmodules, doing this manually |
| sed -i \ |
| -e '/^SUBDIRS/d' \ |
| datapath/Makefile.in || die "sed failed" |
| epatch "${FILESDIR}/xcp-interface-reconfigure-2.3.2.patch" |
| eautoreconf |
| } |
| src_configure() { |
| set_arch_to_kernel |
| use monitor || export ovs_cv_python="no" |
| #pyside is staticly disabled |
| export ovs_cv_pyuic4="no" |
| |
| local linux_config |
| use modules && linux_config="--with-linux=${KV_OUT_DIR}" |
| |
| PYTHON=python2.7 econf ${linux_config} \ |
| --with-rundir=/var/run/openvswitch \ |
| --with-logdir=/var/log/openvswitch \ |
| --with-pkidir=/etc/ssl/openvswitch \ |
| --with-dbdir=/var/lib/openvswitch \ |
| $(use_enable ssl) \ |
| $(use_enable !debug ndebug) |
| } |
| |
| src_compile() { |
| default |
| |
| # use monitor && python_fix_shebang \ |
| # utilities/ovs-{pcap,tcpundump,test,vlan-test} \ |
| # utilities/bugtool/ovs-bugtool |
| if use monitor; then |
| sed -i \ |
| 's/^#\!\ python2\.7/#\!\/usr\/bin\/env\ python2\.7/' \ |
| utilities/ovs-{pcap,parse-backtrace,dpctl-top,l3ping,tcpundump,test,vlan-test} \ |
| utilities/bugtool/ovs-bugtool || die "sed died :(" |
| fi |
| |
| use modules && linux-mod_src_compile |
| } |
| |
| src_install() { |
| default |
| |
| if use monitor ; then |
| python_domodule "${ED}"/usr/share/openvswitch/python/* |
| rm -r "${ED}/usr/share/openvswitch/python" |
| python_optimize "${ED}/usr/share/ovsdbmonitor" |
| fi |
| # not working without the brcompat_mod kernel module which did not get |
| # included in the kernel and we can't build it anymore |
| rm "${D}/usr/sbin/ovs-brcompatd" "${D}/usr/share/man/man8/ovs-brcompatd.8" |
| |
| keepdir /var/{lib,log}/openvswitch |
| keepdir /etc/ssl/openvswitch |
| fperms 0750 /etc/ssl/openvswitch |
| |
| rm -rf "${ED}/var/run" |
| use monitor || rmdir "${ED}/usr/share/ovsdbmonitor" |
| use debug || rm "${ED}/usr/bin/ovs-parse-leaks" |
| |
| newconfd "${FILESDIR}/ovsdb-server_conf2" ovsdb-server |
| newconfd "${FILESDIR}/ovs-vswitchd_conf" ovs-vswitchd |
| newinitd "${FILESDIR}/ovsdb-server-r1" ovsdb-server |
| newinitd "${FILESDIR}/ovs-vswitchd-r1" ovs-vswitchd |
| |
| systemd_dounit "${FILESDIR}/ovsdb-server.service" |
| systemd_dounit "${FILESDIR}/ovs-vswitchd.service" |
| systemd_newtmpfilesd "${FILESDIR}/openvswitch.tmpfiles" openvswitch.conf |
| |
| insinto /etc/logrotate.d |
| newins rhel/etc_logrotate.d_openvswitch openvswitch |
| |
| use modules && linux-mod_src_install |
| } |
| |
| pkg_postinst() { |
| use modules && linux-mod_pkg_postinst |
| |
| for pv in ${REPLACING_VERSIONS}; do |
| if ! version_is_at_least 1.9.0 ${pv} ; then |
| ewarn "The configuration database for Open vSwitch got moved in version 1.9.0 from" |
| ewarn " /etc/openvswitch" |
| ewarn "to" |
| ewarn " /var/lib/openvswitch" |
| ewarn "Please copy/move the database manually before running the schema upgrade." |
| ewarn "The PKI files are now supposed to go to /etc/ssl/openvswitch" |
| fi |
| done |
| |
| elog "Use the following command to create an initial database for ovsdb-server:" |
| elog " emerge --config =${CATEGORY}/${PF}" |
| elog "(will create a database in /var/lib/openvswitch/conf.db)" |
| elog "or to convert the database to the current schema after upgrading." |
| } |
| |
| pkg_config() { |
| local db="${EPREFIX}/var/lib/openvswitch/conf.db" |
| if [ -e "${db}" ] ; then |
| einfo "Database '${db}' already exists, doing schema migration..." |
| einfo "(if the migration fails, make sure that ovsdb-server is not running)" |
| "${EPREFIX}/usr/bin/ovsdb-tool" convert "${db}" "${EPREFIX}/usr/share/openvswitch/vswitch.ovsschema" || die "converting database failed" |
| else |
| einfo "Creating new database '${db}'..." |
| "${EPREFIX}/usr/bin/ovsdb-tool" create "${db}" "${EPREFIX}/usr/share/openvswitch/vswitch.ovsschema" || die "creating database failed" |
| fi |
| } |