| # Copyright 1999-2013 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Id$ |
| |
| inherit eutils linux-info |
| |
| DESCRIPTION="Firmware, kernel driver and configuration instructions for Alcatel SpeedTouch USB modems" |
| HOMEPAGE="http://www.speedtouch.com/" |
| SRC_URI="http://www.speedtouch.com/download/drivers/USB/SpeedTouch330_firmware_${PV//./}.zip" |
| |
| # Taken from http://www.speedtouch.com/driver_upgrade_lx_3.0.1.2.htm |
| LICENSE="SpeedTouch-USB-Firmware" |
| SLOT="0" |
| KEYWORDS="~amd64 x86" |
| IUSE="" |
| |
| RDEPEND="net-dialup/ppp" |
| DEPEND="app-arch/unzip" |
| |
| S="${WORKDIR}" |
| |
| pkg_setup() { |
| linux-info_pkg_setup |
| |
| if kernel_is lt 2 6 10 ; then |
| eerror "The kernel-space driver exists only in kernels >= 2.6.10." |
| eerror "Please upgrade the kernel." |
| die "Unsupported kernel version" |
| fi |
| } |
| |
| src_install() { |
| local FILE_VER="${PV#*.}" |
| FILE_VER="${PV%%.*}.${FILE_VER//./}" # {major_ver}.{minor_digits} |
| |
| # Extract the "stage 1" portion of the firmware |
| dd if=KQD6_${FILE_VER} of=speedtch-1.bin.2 \ |
| ibs=1 obs=991 count=991 skip=36 &> /dev/null \ |
| || die "Extraction of stage 1 firmware (step 1) failed" |
| |
| dd if=ZZZL_${FILE_VER} of=speedtch-1.bin.4 \ |
| ibs=1 obs=935 count=935 skip=32 &> /dev/null \ |
| || die "Extraction of stage 1 firmware (step 2) failed" |
| |
| # Extract the "stage 2" portion of the firmware |
| dd if=KQD6_${FILE_VER} of=speedtch-2.bin.2 \ |
| ibs=1 obs=762650 count=762650 skip=1027 &> /dev/null \ |
| || die "Extraction of stage 2 firmware (step 1) failed" |
| |
| dd if=ZZZL_${FILE_VER} of=speedtch-2.bin.4 \ |
| ibs=1 obs=775545 count=775545 skip=967 &> /dev/null \ |
| || die "Extraction of stage 2 firmware (step 2) failed" |
| |
| # Copy to the firmware directory |
| insinto /lib/firmware |
| insopts -m 600 |
| doins speedtch-{1,2}.bin.{2,4} || die "doins firmware failed" |
| |
| # Symlinks for other revisions of the modem |
| cd "${D}/lib/firmware" |
| for n in 1 2 ; do |
| for rev in 0 1 ; do |
| ln -sfn speedtch-${n}.bin.2 speedtch-${n}.bin.${rev} |
| done |
| # Seems like a reasonable guess, for revision 3 |
| ln -sfn speedtch-${stub}${n}.bin.4 speedtch-${n}.bin.3 |
| done |
| |
| # Documentation necessary to complete the setup |
| dodoc "${FILESDIR}/README" || die "dodoc failed" |
| } |
| |
| pkg_postinst() { |
| [[ -e /etc/hotplug/usb.usermap ]] && egrep -q " 0x06[bB]9 +0x4061 " /etc/hotplug/usb.usermap && \ |
| ewarn "Please remove the SpeedTouch line from /etc/hotplug/usb.usermap" |
| |
| # Check kernel configuration |
| local CONFIG_CHECK="~FW_LOADER ~NET ~PACKET ~ATM ~NETDEVICES ~USB_DEVICEFS ~USB_ATM ~USB_SPEEDTOUCH \ |
| ~PPP ~PPPOATM ~PPPOE ~ATM_BR2684" |
| local WARNING_PPPOATM="CONFIG_PPPOATM:\t is not set (required for PPPoA links)" |
| local WARNING_PPPOE="CONFIG_PPPOE:\t is not set (required for PPPoE links)" |
| local WARNING_ATM_BR2684="CONFIG_ATM_BR2684:\t is not set (required for PPPoE links)" |
| check_extra_config |
| echo |
| |
| # Check user-space for PPPoA support |
| if ! built_with_use net-dialup/ppp atm ; then |
| ewarn "Run the following command if connecting via PPPoA protocol:" |
| ewarn " euse -E atm && emerge net-dialup/ppp" |
| echo |
| fi |
| # Check user-space for PPPoE support |
| if ! has_version >=net-dialup/linux-atm-2.5.0 ; then |
| ewarn "Run the following command if connecting via PPPoE protocol:" |
| ewarn " emerge net-dialup/linux-atm" |
| echo |
| fi |
| |
| ewarn "To complete the installation, you must read the documentation in" |
| ewarn " ${ROOT}usr/share/doc/${PF}" |
| } |