| # Copyright 1999-2015 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Id$ |
| |
| EAPI=5 |
| inherit autotools eutils linux-info multilib systemd toolchain-funcs udev |
| |
| DESCRIPTION="User-land utilities for LVM2 (device-mapper) software" |
| HOMEPAGE="https://sources.redhat.com/lvm2/" |
| SRC_URI="ftp://sources.redhat.com/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz |
| ftp://sources.redhat.com/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz" |
| |
| LICENSE="GPL-2" |
| SLOT="0" |
| KEYWORDS="alpha amd64 arm arm64 hppa ia64 ~mips ppc ppc64 s390 sh sparc x86 ~amd64-linux ~x86-linux" |
| IUSE="readline static static-libs clvm cman +lvm1 lvm2create_initrd selinux +udev +thin" |
| |
| DEPEND_COMMON="clvm? ( cman? ( =sys-cluster/cman-3* ) =sys-cluster/libdlm-3* ) |
| readline? ( sys-libs/readline:0= ) |
| udev? ( >=virtual/libudev-208:=[static-libs?] )" |
| # /run is now required for locking during early boot. /var cannot be assumed to |
| # be available -- thus, pull in recent enough baselayout for /run. |
| # This version of LVM is incompatible with cryptsetup <1.1.2. |
| RDEPEND="${DEPEND_COMMON} |
| >=sys-apps/baselayout-2.2 |
| !<sys-apps/openrc-0.11 |
| !<sys-fs/cryptsetup-1.1.2 |
| !!sys-fs/clvm |
| !!sys-fs/lvm-user |
| >=sys-apps/util-linux-2.16 |
| lvm2create_initrd? ( sys-apps/makedev ) |
| thin? ( >=sys-block/thin-provisioning-tools-0.2.1 )" |
| DEPEND="${DEPEND_COMMON} |
| virtual/pkgconfig |
| >=sys-devel/binutils-2.20.1-r1 |
| static? ( |
| selinux? ( sys-libs/libselinux[static-libs] ) |
| udev? ( >=virtual/libudev-208:=[static-libs] ) |
| )" |
| |
| S=${WORKDIR}/${PN/lvm/LVM}.${PV} |
| |
| pkg_setup() { |
| local CONFIG_CHECK="~SYSVIPC" |
| |
| if use udev; then |
| local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n" |
| if linux_config_exists; then |
| local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH) |
| if [ -n "${uevent_helper_path}" ] && [ "${uevent_helper_path}" != '""' ]; then |
| ewarn "It's recommended to set an empty value to the following kernel config option:" |
| ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}" |
| fi |
| fi |
| fi |
| |
| check_extra_config |
| |
| # 1. Genkernel no longer copies /sbin/lvm blindly. |
| if use static; then |
| elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with" |
| elog "their static versions. If you need the static binaries," |
| elog "you must append .static to the filename!" |
| fi |
| } |
| |
| src_prepare() { |
| # Gentoo specific modification(s): |
| epatch "${FILESDIR}"/${PN}-2.02.99-example.conf.in.patch |
| |
| sed -i \ |
| -e "1iAR = $(tc-getAR)" \ |
| -e "s:CC ?= @CC@:CC = $(tc-getCC):" \ |
| make.tmpl.in || die #444082 |
| |
| sed -i -e '/FLAG/s:-O2::' configure{,.in} || die #480212 |
| |
| # For upstream -- review and forward: |
| epatch "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch |
| epatch "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch |
| epatch "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331 |
| epatch "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373 |
| epatch "${FILESDIR}"/${PN}-2.02.70-asneeded.patch # -Wl,--as-needed |
| epatch "${FILESDIR}"/${PN}-2.02.92-dynamic-static-ldflags.patch #332905 |
| epatch "${FILESDIR}"/${PN}-2.02.100-selinux_and_udev_static.patch #370217, #439414 |
| |
| eautoreconf |
| } |
| |
| src_configure() { |
| local myconf |
| local buildmode |
| |
| myconf="${myconf} --enable-dmeventd" |
| myconf="${myconf} --enable-cmdlib" |
| myconf="${myconf} --enable-applib" |
| myconf="${myconf} --enable-fsadm" |
| myconf="${myconf} --enable-lvmetad" |
| |
| # Most of this package does weird stuff. |
| # The build options are tristate, and --without is NOT supported |
| # options: 'none', 'internal', 'shared' |
| if use static; then |
| buildmode="internal" |
| # This only causes the .static versions to become available |
| myconf="${myconf} --enable-static_link" |
| else |
| buildmode="shared" |
| fi |
| |
| # dmeventd requires mirrors to be internal, and snapshot available |
| # so we cannot disable them |
| myconf="${myconf} --with-mirrors=internal" |
| myconf="${myconf} --with-snapshots=internal" |
| use thin \ |
| && myconf="${myconf} --with-thin=internal" \ |
| || myconf="${myconf} --with-thin=none" |
| |
| if use lvm1; then |
| myconf="${myconf} --with-lvm1=${buildmode}" |
| else |
| myconf="${myconf} --with-lvm1=none" |
| fi |
| |
| # disable O_DIRECT support on hppa, breaks pv detection (#99532) |
| use hppa && myconf="${myconf} --disable-o_direct" |
| |
| if use clvm; then |
| myconf="${myconf} --with-cluster=${buildmode}" |
| # 4-state! Make sure we get it right, per bug 210879 |
| # Valid options are: none, cman, gulm, all |
| # |
| # 2009/02: |
| # gulm is removed now, now dual-state: |
| # cman, none |
| # all still exists, but is not needed |
| # |
| # 2009/07: |
| # TODO: add corosync and re-enable ALL |
| local clvmd="" |
| use cman && clvmd="cman" |
| #clvmd="${clvmd/cmangulm/all}" |
| [ -z "${clvmd}" ] && clvmd="none" |
| myconf="${myconf} --with-clvmd=${clvmd}" |
| myconf="${myconf} --with-pool=${buildmode}" |
| else |
| myconf="${myconf} --with-clvmd=none --with-cluster=none" |
| fi |
| |
| econf \ |
| $(use_enable readline) \ |
| $(use_enable selinux) \ |
| --enable-pkgconfig \ |
| --with-confdir="${EPREFIX}"/etc \ |
| --exec-prefix="${EPREFIX}" \ |
| --sbindir="${EPREFIX}/sbin" \ |
| --with-staticdir="${EPREFIX}"/sbin \ |
| --libdir="${EPREFIX}/$(get_libdir)" \ |
| --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" \ |
| --with-default-dm-run-dir=/run \ |
| --with-default-run-dir=/run/lvm \ |
| --with-default-locking-dir=/run/lock/lvm \ |
| --with-default-pid-dir=/run \ |
| $(use_enable udev udev_rules) \ |
| $(use_enable udev udev_sync) \ |
| $(use_with udev udevdir "$(get_udevdir)"/rules.d) \ |
| "$(systemd_with_unitdir)" \ |
| ${myconf} \ |
| CLDFLAGS="${LDFLAGS}" |
| } |
| |
| src_compile() { |
| pushd include >/dev/null |
| emake |
| popd >/dev/null |
| |
| emake |
| emake CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat |
| } |
| |
| src_install() { |
| local inst |
| for inst in install install_systemd_units install_systemd_generators install_tmpfiles_configuration; do |
| emake DESTDIR="${D}" ${inst} |
| done |
| |
| newinitd "${FILESDIR}"/lvm.rc-2.02.95-r2 lvm |
| newconfd "${FILESDIR}"/lvm.confd-2.02.28-r2 lvm |
| |
| newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.67-r2 lvm-monitoring |
| |
| newinitd "${FILESDIR}"/device-mapper.rc-2.02.95-r2 device-mapper |
| newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper |
| |
| newinitd "${FILESDIR}"/dmeventd.initd-2.02.67-r1 dmeventd |
| |
| if use clvm; then |
| newinitd "${FILESDIR}"/clvmd.rc-2.02.39 clvmd |
| newconfd "${FILESDIR}"/clvmd.confd-2.02.39 clvmd |
| fi |
| |
| if use static-libs; then |
| dolib.a libdm/ioctl/libdevmapper.a |
| dolib.a libdaemon/client/libdaemonclient.a #462908 |
| #gen_usr_ldscript libdevmapper.so |
| dolib.a daemons/dmeventd/libdevmapper-event.a |
| #gen_usr_ldscript libdevmapper-event.so |
| else |
| rm -f "${ED}"usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a |
| fi |
| |
| if use lvm2create_initrd; then |
| dosbin scripts/lvm2create_initrd/lvm2create_initrd |
| doman scripts/lvm2create_initrd/lvm2create_initrd.8 |
| newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd |
| fi |
| |
| insinto /etc |
| doins "${FILESDIR}"/dmtab |
| |
| dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf |
| } |
| |
| pkg_postinst() { |
| ewarn "Make sure the \"lvm\" init script is in the runlevels:" |
| ewarn "# rc-update add lvm boot" |
| ewarn |
| ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want" |
| ewarn "to enable lvm autoactivation and metadata caching." |
| } |
| |
| src_test() { |
| einfo "Tests are disabled because of device-node mucking, if you want to" |
| einfo "run tests, compile the package and see ${S}/tests" |
| } |