| # Copyright 1999-2014 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Id$ |
| |
| EAPI=5 |
| |
| inherit flag-o-matic eutils linux-info |
| |
| DESCRIPTION="Resource manager and queuing system based on OpenPBS" |
| HOMEPAGE="http://www.adaptivecomputing.com/products/open-source/torque" |
| # TODO: hopefully moving to github tags soon |
| # http://www.supercluster.org/pipermail/torquedev/2013-May/004519.html |
| SRC_URI="http://www.adaptivecomputing.com/index.php?wpfb_dl=1690 -> ${P}.tar.gz" |
| |
| LICENSE="torque-2.5" |
| SLOT="0" |
| KEYWORDS="alpha amd64 hppa ia64 ~mips ppc ppc64 sparc x86" |
| IUSE="cpusets +crypt doc drmaa kernel_linux munge nvidia server +syslog tk" |
| |
| DEPEND_COMMON=" |
| sys-libs/ncurses |
| sys-libs/readline |
| cpusets? ( sys-apps/hwloc ) |
| munge? ( sys-auth/munge ) |
| nvidia? ( >=x11-drivers/nvidia-drivers-275 ) |
| tk? ( dev-lang/tk ) |
| syslog? ( virtual/logger ) |
| !games-util/qstat" |
| |
| DEPEND="${DEPEND_COMMON} |
| !sys-cluster/slurm" |
| |
| RDEPEND="${DEPEND_COMMON} |
| crypt? ( net-misc/openssh ) |
| !crypt? ( net-misc/netkit-rsh ) |
| !dev-libs/uthash" |
| |
| # Torque should depend on dev-libs/uthash but that's pretty much impossible |
| # to patch in as they ship with a broken configure such that files referenced |
| # by the configure.ac and Makefile.am are missing. |
| # http://www.supercluster.org/pipermail/torquedev/2014-October/004773.html |
| |
| pkg_setup() { |
| PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/${PN}}" |
| |
| # Find a Torque server to use. Check environment, then |
| # current setup (if any), and fall back on current hostname. |
| if [ -z "${PBS_SERVER_NAME}" ]; then |
| if [ -f "${ROOT}${PBS_SERVER_HOME}/server_name" ]; then |
| PBS_SERVER_NAME="$(<${ROOT}${PBS_SERVER_HOME}/server_name)" |
| else |
| PBS_SERVER_NAME=$(hostname -f) |
| fi |
| fi |
| |
| USE_CPUSETS="--disable-cpuset" |
| if use cpusets; then |
| if ! use kernel_linux; then |
| einfo |
| elog " Torque currently only has support for cpusets in linux." |
| elog "Assuming you didn't really want this USE flag." |
| einfo |
| else |
| linux-info_pkg_setup |
| if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then |
| einfo |
| elog " Torque support for cpusets will require that you recompile" |
| elog "your kernel with CONFIG_CPUSETS enabled." |
| einfo |
| fi |
| USE_CPUSETS="--enable-cpuset" |
| fi |
| fi |
| } |
| |
| src_prepare() { |
| # Unused and causes breakage when switching from glibc to tirpc. |
| # https://github.com/adaptivecomputing/torque/pull/148 |
| sed -i '/rpc\/rpc\.h/d' src/lib/Libnet/net_client.c || die |
| |
| # We install to a valid location, no need to muck with ld.so.conf |
| # --without-loadlibfile is supposed to do this for us... |
| sed -i '/mk_default_ld_lib_file || return 1/d' buildutils/pbs_mkdirs.in || die |
| |
| epatch "${FILESDIR}"/${PN}-4.1.5.1-tcl8.6.patch |
| |
| # 491270 |
| epatch "${FILESDIR}"/CVE-2013-4495.4.1.patch |
| } |
| |
| src_configure() { |
| local myconf="--with-rcp=mom_rcp" |
| |
| use crypt && myconf="--with-rcp=scp" |
| |
| econf \ |
| $(use_enable tk gui) \ |
| $(use_enable syslog) \ |
| $(use_enable server) \ |
| $(use_enable drmaa) \ |
| $(use_enable munge munge-auth) \ |
| $(use_enable nvidia nvidia-gpus) \ |
| --with-server-home=${PBS_SERVER_HOME} \ |
| --with-environ=/etc/pbs_environment \ |
| --with-default-server=${PBS_SERVER_NAME} \ |
| --disable-gcc-warnings \ |
| --with-tcp-retry-limit=2 \ |
| --without-loadlibfile \ |
| ${USE_CPUSETS} \ |
| ${myconf} |
| } |
| |
| src_install() { |
| local dir |
| |
| DOCS=( CHANGELOG README.* Release_Notes ) |
| use doc && DOCS+=( doc/admin_guide.ps doc/*.pdf ) |
| |
| default |
| |
| # The build script isn't alternative install location friendly, |
| # So we have to fix some hard-coded paths in tclIndex for xpbs* to work |
| for file in $(find "${ED}" -iname tclIndex); do |
| sed \ |
| -e "s/${ED//\// }/ /" \ |
| -i "${file}" || die |
| done |
| |
| for dir in $(find "${ED}/${PBS_SERVER_HOME}" -type d); do |
| keepdir "${dir#${ED}}" |
| done |
| |
| if use server; then |
| newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server |
| newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched |
| fi |
| newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom |
| newconfd "${FILESDIR}"/${PN}-conf.d-munge ${PN} |
| newinitd "${FILESDIR}"/trqauthd-init.d trqauthd |
| newenvd "${FILESDIR}"/${PN}-env.d 25${PN} |
| } |
| |
| pkg_preinst() { |
| if [[ -f "${ROOT}etc/pbs_environment" ]]; then |
| cp "${ROOT}etc/pbs_environment" "${ED}"/etc/pbs_environment || die |
| fi |
| |
| if use server && [[ -f "${ROOT}${PBS_SERVER_HOME}/server_priv/nodes" ]]; then |
| cp \ |
| "${EROOT}${PBS_SERVER_HOME}/server_priv/nodes" \ |
| "${ED}/${PBS_SERVER_HOME}/server_priv/nodes" || die |
| fi |
| |
| echo "${PBS_SERVER_NAME}" > "${ED}${PBS_SERVER_HOME}/server_name" || die |
| |
| # Fix up the env.d file to use our set server home. |
| sed \ |
| -e "s:/var/spool/${PN}:${PBS_SERVER_HOME}:g" \ |
| -i "${ED}"/etc/env.d/25${PN} || die |
| |
| if use munge; then |
| sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${ED}"/etc/conf.d/${PN} || die |
| fi |
| } |
| |
| pkg_postinst() { |
| elog " If this is the first time torque has been installed, then you are not" |
| elog "ready to start the server. Please refer to the documentation located at:" |
| elog "http://www.clusterresources.com/wiki/doku.php?id=torque:torque_wiki" |
| echo "" |
| elog " For a basic setup, you may use emerge --config ${PN}" |
| echo "" |
| if [[ -z "${REPLACING_VERSIONS}" ]] || [[ ${REPLACING_VERSIONS} < 4 ]]; then |
| elog "Important 4.0+ updates" |
| elog " - The on-wire protocol version has been changed." |
| elog " Versions of Torque before 4.0.0 are no longer able to communicate." |
| elog " - pbs_iff has been replaced by trqauthd, you will now need to add" |
| elog " trqauthd to your default runlevel." |
| fi |
| } |
| |
| # root will be setup as the primary operator/manager, the local machine |
| # will be added as a node and we'll create a simple queue, batch. |
| pkg_config() { |
| local h="$(echo "${ROOT}/${PBS_SERVER_HOME}" | sed 's:///*:/:g')" |
| local rc=0 |
| |
| ebegin "Configuring Torque" |
| einfo "Using ${h} as the pbs homedir" |
| einfo "Using ${PBS_SERVER_NAME} as the pbs_server" |
| |
| # Check for previous configuration and bail if found. |
| if [ -e "${h}/server_priv/acl_svr/operators" ] \ |
| || [ -e "${h}/server_priv/nodes" ] \ |
| || [ -e "${h}/mom_priv/config" ]; then |
| ewarn "Previous Torque configuration detected. Press Enter to" |
| ewarn "continue or Control-C to abort now" |
| read |
| fi |
| |
| # pbs_mom configuration. |
| echo "\$pbsserver ${PBS_SERVER_NAME}" > "${h}/mom_priv/config" || die |
| echo "\$logevent 255" >> "${h}/mom_priv/config" || die |
| |
| if use server; then |
| local qmgr="${EROOT}/usr/bin/qmgr -c" |
| # pbs_server bails on repeated backslashes. |
| if ! "${EROOT}"/usr/sbin/pbs_server -f -d "${h}" -t create; then |
| eerror "Failed to start pbs_server" |
| rc=1 |
| else |
| ${qmgr} "set server operators = root@$(hostname -f)" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "create queue batch" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set queue batch queue_type = Execution" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set queue batch started = True" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set queue batch enabled = True" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set server default_queue = batch" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set server resources_default.nodes = 1" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set server scheduling = True" ${PBS_SERVER_NAME} \ |
| || die |
| |
| "${EROOT}"/usr/bin/qterm -t quick ${PBS_SERVER_NAME} || rc=1 |
| |
| # Add the local machine as a node. |
| echo "$(hostname -f) np=1" > "${h}/server_priv/nodes" || die |
| fi |
| fi |
| eend ${rc} |
| } |