| # Copyright 1999-2014 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Id$ |
| |
| EAPI=4 |
| |
| inherit autotools-utils eutils flag-o-matic linux-info |
| |
| DESCRIPTION="Resource manager and queuing system based on OpenPBS" |
| HOMEPAGE="http://www.adaptivecomputing.com/products/open-source/torque" |
| SRC_URI="http://www.adaptivecomputing.com/index.php?wpfb_dl=1643 -> ${P}.tar.gz" |
| |
| LICENSE="torque-2.5" |
| |
| SLOT="0" |
| KEYWORDS="alpha amd64 hppa ia64 ~mips ppc ppc64 sparc x86" |
| IUSE="cpusets +crypt doc drmaa kernel_linux munge server static-libs +syslog threads tk xml" |
| |
| # ed is used by makedepend-sh |
| DEPEND_COMMON="sys-libs/ncurses |
| sys-libs/readline |
| munge? ( sys-auth/munge ) |
| tk? ( dev-lang/tk ) |
| syslog? ( virtual/logger ) |
| !games-util/qstat" |
| |
| DEPEND="${DEPEND_COMMON} |
| sys-apps/ed |
| !sys-cluster/slurm" |
| |
| RDEPEND="${DEPEND_COMMON} |
| crypt? ( net-misc/openssh ) |
| !crypt? ( net-misc/netkit-rsh )" |
| |
| DOCS=( Release_Notes ) |
| |
| AUTOTOOLS_IN_SOURCE_BUILD=1 |
| |
| pkg_setup() { |
| PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/torque}" |
| |
| # Find a Torque server to use. Check environment, then |
| # current setup (if any), and fall back on current hostname. |
| if [ -z "${PBS_SERVER_NAME}" ]; then |
| if [ -f "${ROOT}${PBS_SERVER_HOME}/server_name" ]; then |
| PBS_SERVER_NAME="$(<${ROOT}${PBS_SERVER_HOME}/server_name)" |
| else |
| PBS_SERVER_NAME=$(hostname -f) |
| fi |
| fi |
| |
| USE_CPUSETS="--disable-cpuset" |
| if use cpusets; then |
| if ! use kernel_linux; then |
| einfo |
| elog " Torque currently only has support for cpusets in linux." |
| elog "Assuming you didn't really want this USE flag." |
| einfo |
| else |
| linux-info_pkg_setup |
| einfo |
| elog " Torque support for cpusets is still in development, you may" |
| elog "wish to disable it for production use." |
| einfo |
| if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then |
| einfo |
| elog " Torque support for cpusets will require that you recompile" |
| elog "your kernel with CONFIG_CPUSETS enabled." |
| einfo |
| fi |
| USE_CPUSETS="--enable-cpuset" |
| fi |
| fi |
| } |
| |
| src_prepare() { |
| epatch "${FILESDIR}"/CVE-2013-4319-2.x-root-submit-fix.patch |
| epatch "${FILESDIR}"/tcl8.6.patch |
| |
| # 510726 |
| epatch "${FILESDIR}"/CVE-2014-0749.patch |
| |
| # 491270 |
| epatch "${FILESDIR}"/CVE-2013-4495.patch |
| |
| # Unused and causes breakage when switching from glibc to tirpc. |
| # https://github.com/adaptivecomputing/torque/pull/148 |
| sed -i '/rpc\/rpc\.h/d' src/lib/Libnet/net_client.c || die |
| } |
| |
| src_configure() { |
| local myeconfargs=( --with-rcp=mom_rcp ) |
| |
| use crypt && myeconfargs=( --with-rcp=scp ) |
| |
| myeconfargs+=( |
| $(use_enable tk gui) |
| $(use_enable tk tcl-qstat) |
| $(use_enable syslog) |
| $(use_enable server) |
| $(use_enable drmaa) |
| $(use_enable threads high-availability) |
| $(use_enable xml server-xml) |
| $(use_enable munge munge-library) |
| --with-server-home=${PBS_SERVER_HOME} |
| --with-environ=/etc/pbs_environment |
| --with-default-server=${PBS_SERVER_NAME} |
| --disable-gcc-warnings |
| --with-tcp-retry-limit=2 |
| ${USE_CPUSETS} |
| ) |
| autotools-utils_src_configure |
| } |
| |
| # WARNING |
| # OpenPBS is extremely stubborn about directory permissions. Sometimes it will |
| # just fall over with the error message, but in some spots it will just ignore |
| # you and fail strangely. Likewise it also barfs on our .keep files! |
| pbs_createspool() { |
| local root="$1" |
| local s="$(dirname "${PBS_SERVER_HOME}")" |
| local h="${PBS_SERVER_HOME}" |
| local sp="${h}/server_priv" |
| einfo "Building spool directory under ${D}${h}" |
| local a d m |
| local dir_spec=" |
| 0755:${h}/aux 0700:${h}/checkpoint |
| 0755:${h}/mom_logs 0751:${h}/mom_priv 0751:${h}/mom_priv/jobs |
| 1777:${h}/spool 1777:${h}/undelivered" |
| |
| if use server; then |
| dir_spec="${dir_spec} 0755:${h}/sched_logs |
| 0755:${h}/sched_priv/accounting 0755:${h}/server_logs |
| 0750:${h}/server_priv 0755:${h}/server_priv/accounting |
| 0750:${h}/server_priv/acl_groups 0750:${h}/server_priv/acl_hosts |
| 0750:${h}/server_priv/acl_svr 0750:${h}/server_priv/acl_users |
| 0750:${h}/server_priv/jobs 0750:${h}/server_priv/queues" |
| fi |
| |
| for a in ${dir_spec}; do |
| d="${a/*:}" |
| m="${a/:*}" |
| if [[ ! -d "${root}${d}" ]]; then |
| install -d -m${m} "${root}${d}" || die |
| else |
| chmod ${m} "${root}${d}" || die |
| fi |
| # (#149226) If we're running in src_*, then keepdir |
| if [[ "${root}" = "${D}" ]]; then |
| keepdir ${d} |
| fi |
| done |
| } |
| |
| src_install() { |
| # Make directories first |
| pbs_createspool "${D}" |
| |
| autotools-utils_src_install |
| |
| use doc && dodoc doc/admin_guide.ps doc/*.pdf |
| |
| # The build script isn't alternative install location friendly, |
| # So we have to fix some hard-coded paths in tclIndex for xpbs* to work |
| for file in `find "${D}" -iname tclIndex`; do |
| sed -e "s/${D//\// }/ /" "${file}" > "${file}.new" |
| mv "${file}.new" "${file}" || die |
| done |
| |
| if use server; then |
| newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server |
| newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched |
| fi |
| newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom |
| newconfd "${FILESDIR}"/torque-conf.d-munge torque |
| newenvd "${FILESDIR}"/torque-env.d 25torque |
| } |
| |
| pkg_preinst() { |
| if [[ -f "${ROOT}etc/pbs_environment" ]]; then |
| cp "${ROOT}etc/pbs_environment" "${D}"/etc/pbs_environment || die |
| fi |
| |
| echo "${PBS_SERVER_NAME}" > "${D}${PBS_SERVER_HOME}/server_name" || die |
| |
| # Fix up the env.d file to use our set server home. |
| sed -i \ |
| "s:/var/spool/torque:${PBS_SERVER_HOME}:g" "${D}"/etc/env.d/25torque \ |
| || die |
| |
| if use munge; then |
| sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${D}"etc/conf.d/torque || die |
| fi |
| } |
| |
| pkg_postinst() { |
| pbs_createspool "${ROOT}" |
| elog " If this is the first time torque has been installed, then you are not" |
| elog "ready to start the server. Please refer to the documentation located at:" |
| elog "http://www.clusterresources.com/wiki/doku.php?id=torque:torque_wiki" |
| echo |
| elog " For a basic setup, you may use emerge --config ${PN}" |
| } |
| |
| # root will be setup as the primary operator/manager, the local machine |
| # will be added as a node and we'll create a simple queue, batch. |
| pkg_config() { |
| local h="$(echo "${ROOT}/${PBS_SERVER_HOME}" | sed 's:///*:/:g')" |
| local rc=0 |
| |
| ebegin "Configuring Torque" |
| einfo "Using ${h} as the pbs homedir" |
| einfo "Using ${PBS_SERVER_NAME} as the pbs_server" |
| |
| # Check for previous configuration and bail if found. |
| if [ -e "${h}/server_priv/acl_svr/operators" ] \ |
| || [ -e "${h}/server_priv/nodes" ] \ |
| || [ -e "${h}/mom_priv/config" ]; then |
| ewarn "Previous Torque configuration detected. Press Enter to" |
| ewarn "continue or Control-C to abort now" |
| read |
| fi |
| |
| # pbs_mom configuration. |
| echo "\$pbsserver ${PBS_SERVER_NAME}" > "${h}/mom_priv/config" || die |
| echo "\$logevent 255" >> "${h}/mom_priv/config" || die |
| |
| if use server; then |
| local qmgr="${ROOT}/usr/bin/qmgr -c" |
| # pbs_server bails on repeated backslashes. |
| if ! "${ROOT}"/usr/sbin/pbs_server -f -d "${h}" -t create; then |
| eerror "Failed to start pbs_server" |
| rc=1 |
| else |
| ${qmgr} "set server operators = root@$(hostname -f)" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "create queue batch" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set queue batch queue_type = Execution" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set queue batch started = True" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set queue batch enabled = True" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set server default_queue = batch" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set server resources_default.nodes = 1" ${PBS_SERVER_NAME} \ |
| && ${qmgr} "set server scheduling = True" ${PBS_SERVER_NAME} \ |
| || die |
| |
| "${ROOT}"/usr/bin/qterm -t quick ${PBS_SERVER_NAME} || rc=1 |
| |
| # Add the local machine as a node. |
| echo "$(hostname -f) np=1" > "${h}/server_priv/nodes" || die |
| fi |
| fi |
| eend ${rc} |
| } |