| /**************************************************************************** |
| * |
| * ftdebug.h |
| * |
| * Debugging and logging component (specification). |
| * |
| * Copyright (C) 1996-2020 by |
| * David Turner, Robert Wilhelm, and Werner Lemberg. |
| * |
| * This file is part of the FreeType project, and may only be used, |
| * modified, and distributed under the terms of the FreeType project |
| * license, LICENSE.TXT. By continuing to use, modify, or distribute |
| * this file you indicate that you have read the license and |
| * understand and accept it fully. |
| * |
| * |
| * IMPORTANT: A description of FreeType's debugging support can be |
| * found in 'docs/DEBUG.TXT'. Read it if you need to use or |
| * understand this code. |
| * |
| */ |
| |
| |
| #ifndef FTDEBUG_H_ |
| #define FTDEBUG_H_ |
| |
| |
| #include <ft2build.h> |
| #include FT_CONFIG_CONFIG_H |
| #include <freetype/freetype.h> |
| |
| #include "compiler-macros.h" |
| |
| |
| FT_BEGIN_HEADER |
| |
| |
| /* force the definition of FT_DEBUG_LEVEL_ERROR if FT_DEBUG_LEVEL_TRACE */ |
| /* is already defined; this simplifies the following #ifdefs */ |
| /* */ |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| #undef FT_DEBUG_LEVEL_ERROR |
| #define FT_DEBUG_LEVEL_ERROR |
| #endif |
| |
| |
| /************************************************************************** |
| * |
| * Define the trace enums as well as the trace levels array when they are |
| * needed. |
| * |
| */ |
| |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| |
| #define FT_TRACE_DEF( x ) trace_ ## x , |
| |
| /* defining the enumeration */ |
| typedef enum FT_Trace_ |
| { |
| #include <freetype/internal/fttrace.h> |
| trace_count |
| |
| } FT_Trace; |
| |
| |
| /* a pointer to the array of trace levels, */ |
| /* provided by `src/base/ftdebug.c' */ |
| extern int* ft_trace_levels; |
| |
| #undef FT_TRACE_DEF |
| |
| #endif /* FT_DEBUG_LEVEL_TRACE */ |
| |
| |
| /************************************************************************** |
| * |
| * Define the FT_TRACE macro |
| * |
| * IMPORTANT! |
| * |
| * Each component must define the macro FT_COMPONENT to a valid FT_Trace |
| * value before using any TRACE macro. |
| * |
| */ |
| |
| #ifdef FT_DEBUG_LEVEL_TRACE |
| |
| /* we need two macros here to make cpp expand `FT_COMPONENT' */ |
| #define FT_TRACE_COMP( x ) FT_TRACE_COMP_( x ) |
| #define FT_TRACE_COMP_( x ) trace_ ## x |
| |
| #define FT_TRACE( level, varformat ) \ |
| do \ |
| { \ |
| if ( ft_trace_levels[FT_TRACE_COMP( FT_COMPONENT )] >= level ) \ |
| FT_Message varformat; \ |
| } while ( 0 ) |
| |
| #else /* !FT_DEBUG_LEVEL_TRACE */ |
| |
| #define FT_TRACE( level, varformat ) do { } while ( 0 ) /* nothing */ |
| |
| #endif /* !FT_DEBUG_LEVEL_TRACE */ |
| |
| |
| /************************************************************************** |
| * |
| * @function: |
| * FT_Trace_Get_Count |
| * |
| * @description: |
| * Return the number of available trace components. |
| * |
| * @return: |
| * The number of trace components. 0 if FreeType 2 is not built with |
| * FT_DEBUG_LEVEL_TRACE definition. |
| * |
| * @note: |
| * This function may be useful if you want to access elements of the |
| * internal trace levels array by an index. |
| */ |
| FT_BASE( FT_Int ) |
| FT_Trace_Get_Count( void ); |
| |
| |
| /************************************************************************** |
| * |
| * @function: |
| * FT_Trace_Get_Name |
| * |
| * @description: |
| * Return the name of a trace component. |
| * |
| * @input: |
| * The index of the trace component. |
| * |
| * @return: |
| * The name of the trace component. This is a statically allocated |
| * C~string, so do not free it after use. `NULL` if FreeType is not |
| * built with FT_DEBUG_LEVEL_TRACE definition. |
| * |
| * @note: |
| * Use @FT_Trace_Get_Count to get the number of available trace |
| * components. |
| */ |
| FT_BASE( const char* ) |
| FT_Trace_Get_Name( FT_Int idx ); |
| |
| |
| /************************************************************************** |
| * |
| * @function: |
| * FT_Trace_Disable |
| * |
| * @description: |
| * Switch off tracing temporarily. It can be activated again with |
| * @FT_Trace_Enable. |
| */ |
| FT_BASE( void ) |
| FT_Trace_Disable( void ); |
| |
| |
| /************************************************************************** |
| * |
| * @function: |
| * FT_Trace_Enable |
| * |
| * @description: |
| * Activate tracing. Use it after tracing has been switched off with |
| * @FT_Trace_Disable. |
| */ |
| FT_BASE( void ) |
| FT_Trace_Enable( void ); |
| |
| |
| /************************************************************************** |
| * |
| * You need two opening and closing parentheses! |
| * |
| * Example: FT_TRACE0(( "Value is %i", foo )) |
| * |
| * Output of the FT_TRACEX macros is sent to stderr. |
| * |
| */ |
| |
| #define FT_TRACE0( varformat ) FT_TRACE( 0, varformat ) |
| #define FT_TRACE1( varformat ) FT_TRACE( 1, varformat ) |
| #define FT_TRACE2( varformat ) FT_TRACE( 2, varformat ) |
| #define FT_TRACE3( varformat ) FT_TRACE( 3, varformat ) |
| #define FT_TRACE4( varformat ) FT_TRACE( 4, varformat ) |
| #define FT_TRACE5( varformat ) FT_TRACE( 5, varformat ) |
| #define FT_TRACE6( varformat ) FT_TRACE( 6, varformat ) |
| #define FT_TRACE7( varformat ) FT_TRACE( 7, varformat ) |
| |
| |
| /************************************************************************** |
| * |
| * Define the FT_ERROR macro. |
| * |
| * Output of this macro is sent to stderr. |
| * |
| */ |
| |
| #ifdef FT_DEBUG_LEVEL_ERROR |
| |
| #define FT_ERROR( varformat ) FT_Message varformat |
| |
| #else /* !FT_DEBUG_LEVEL_ERROR */ |
| |
| #define FT_ERROR( varformat ) do { } while ( 0 ) /* nothing */ |
| |
| #endif /* !FT_DEBUG_LEVEL_ERROR */ |
| |
| |
| /************************************************************************** |
| * |
| * Define the FT_ASSERT and FT_THROW macros. The call to `FT_Throw` makes |
| * it possible to easily set a breakpoint at this function. |
| * |
| */ |
| |
| #ifdef FT_DEBUG_LEVEL_ERROR |
| |
| #define FT_ASSERT( condition ) \ |
| do \ |
| { \ |
| if ( !( condition ) ) \ |
| FT_Panic( "assertion failed on line %d of file %s\n", \ |
| __LINE__, __FILE__ ); \ |
| } while ( 0 ) |
| |
| #define FT_THROW( e ) \ |
| ( FT_Throw( FT_ERR_CAT( FT_ERR_PREFIX, e ), \ |
| __LINE__, \ |
| __FILE__ ) | \ |
| FT_ERR_CAT( FT_ERR_PREFIX, e ) ) |
| |
| #else /* !FT_DEBUG_LEVEL_ERROR */ |
| |
| #define FT_ASSERT( condition ) do { } while ( 0 ) |
| |
| #define FT_THROW( e ) FT_ERR_CAT( FT_ERR_PREFIX, e ) |
| |
| #endif /* !FT_DEBUG_LEVEL_ERROR */ |
| |
| |
| /************************************************************************** |
| * |
| * Define `FT_Message` and `FT_Panic` when needed. |
| * |
| */ |
| |
| #ifdef FT_DEBUG_LEVEL_ERROR |
| |
| #include "stdio.h" /* for vfprintf() */ |
| |
| /* print a message */ |
| FT_BASE( void ) |
| FT_Message( const char* fmt, |
| ... ); |
| |
| /* print a message and exit */ |
| FT_BASE( void ) |
| FT_Panic( const char* fmt, |
| ... ); |
| |
| /* report file name and line number of an error */ |
| FT_BASE( int ) |
| FT_Throw( FT_Error error, |
| int line, |
| const char* file ); |
| |
| #endif /* FT_DEBUG_LEVEL_ERROR */ |
| |
| |
| FT_BASE( void ) |
| ft_debug_init( void ); |
| |
| FT_END_HEADER |
| |
| #endif /* FTDEBUG_H_ */ |
| |
| |
| /* END */ |