| /* libFLAC - Free Lossless Audio Codec library | |
| * Copyright (C) 2000-2009 Josh Coalson | |
| * Copyright (C) 2011-2023 Xiph.Org Foundation | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * - Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * | |
| * - Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * | |
| * - Neither the name of the Xiph.org Foundation nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #ifdef HAVE_CONFIG_H | |
| # include <config.h> | |
| #endif | |
| #include <math.h> | |
| #include <string.h> | |
| #include "share/compat.h" | |
| #include "private/bitmath.h" | |
| #include "private/fixed.h" | |
| #include "private/macros.h" | |
| #include "FLAC/assert.h" | |
| #ifdef local_abs | |
| #undef local_abs | |
| #endif | |
| #define local_abs(x) ((uint32_t)((x)<0? -(x) : (x))) | |
| #ifdef local_abs64 | |
| #undef local_abs64 | |
| #endif | |
| #define local_abs64(x) ((uint64_t)((x)<0? -(x) : (x))) | |
| #ifdef FLAC__INTEGER_ONLY_LIBRARY | |
| /* rbps stands for residual bits per sample | |
| * | |
| * (ln(2) * err) | |
| * rbps = log (-----------) | |
| * 2 ( n ) | |
| */ | |
| static FLAC__fixedpoint local__compute_rbps_integerized(FLAC__uint32 err, FLAC__uint32 n) | |
| { | |
| FLAC__uint32 rbps; | |
| uint32_t bits; /* the number of bits required to represent a number */ | |
| int fracbits; /* the number of bits of rbps that comprise the fractional part */ | |
| FLAC__ASSERT(sizeof(rbps) == sizeof(FLAC__fixedpoint)); | |
| FLAC__ASSERT(err > 0); | |
| FLAC__ASSERT(n > 0); | |
| FLAC__ASSERT(n <= FLAC__MAX_BLOCK_SIZE); | |
| if(err <= n) | |
| return 0; | |
| /* | |
| * The above two things tell us 1) n fits in 16 bits; 2) err/n > 1. | |
| * These allow us later to know we won't lose too much precision in the | |
| * fixed-point division (err<<fracbits)/n. | |
| */ | |
| fracbits = (8*sizeof(err)) - (FLAC__bitmath_ilog2(err)+1); | |
| err <<= fracbits; | |
| err /= n; | |
| /* err now holds err/n with fracbits fractional bits */ | |
| /* | |
| * Whittle err down to 16 bits max. 16 significant bits is enough for | |
| * our purposes. | |
| */ | |
| FLAC__ASSERT(err > 0); | |
| bits = FLAC__bitmath_ilog2(err)+1; | |
| if(bits > 16) { | |
| err >>= (bits-16); | |
| fracbits -= (bits-16); | |
| } | |
| rbps = (FLAC__uint32)err; | |
| /* Multiply by fixed-point version of ln(2), with 16 fractional bits */ | |
| rbps *= FLAC__FP_LN2; | |
| fracbits += 16; | |
| FLAC__ASSERT(fracbits >= 0); | |
| /* FLAC__fixedpoint_log2 requires fracbits%4 to be 0 */ | |
| { | |
| const int f = fracbits & 3; | |
| if(f) { | |
| rbps >>= f; | |
| fracbits -= f; | |
| } | |
| } | |
| rbps = FLAC__fixedpoint_log2(rbps, fracbits, (uint32_t)(-1)); | |
| if(rbps == 0) | |
| return 0; | |
| /* | |
| * The return value must have 16 fractional bits. Since the whole part | |
| * of the base-2 log of a 32 bit number must fit in 5 bits, and fracbits | |
| * must be >= -3, these assertion allows us to be able to shift rbps | |
| * left if necessary to get 16 fracbits without losing any bits of the | |
| * whole part of rbps. | |
| * | |
| * There is a slight chance due to accumulated error that the whole part | |
| * will require 6 bits, so we use 6 in the assertion. Really though as | |
| * long as it fits in 13 bits (32 - (16 - (-3))) we are fine. | |
| */ | |
| FLAC__ASSERT((int)FLAC__bitmath_ilog2(rbps)+1 <= fracbits + 6); | |
| FLAC__ASSERT(fracbits >= -3); | |
| /* now shift the decimal point into place */ | |
| if(fracbits < 16) | |
| return rbps << (16-fracbits); | |
| else if(fracbits > 16) | |
| return rbps >> (fracbits-16); | |
| else | |
| return rbps; | |
| } | |
| static FLAC__fixedpoint local__compute_rbps_wide_integerized(FLAC__uint64 err, FLAC__uint32 n) | |
| { | |
| FLAC__uint32 rbps; | |
| uint32_t bits; /* the number of bits required to represent a number */ | |
| int fracbits; /* the number of bits of rbps that comprise the fractional part */ | |
| FLAC__ASSERT(sizeof(rbps) == sizeof(FLAC__fixedpoint)); | |
| FLAC__ASSERT(err > 0); | |
| FLAC__ASSERT(n > 0); | |
| FLAC__ASSERT(n <= FLAC__MAX_BLOCK_SIZE); | |
| if(err <= n) | |
| return 0; | |
| /* | |
| * The above two things tell us 1) n fits in 16 bits; 2) err/n > 1. | |
| * These allow us later to know we won't lose too much precision in the | |
| * fixed-point division (err<<fracbits)/n. | |
| */ | |
| fracbits = (8*sizeof(err)) - (FLAC__bitmath_ilog2_wide(err)+1); | |
| err <<= fracbits; | |
| err /= n; | |
| /* err now holds err/n with fracbits fractional bits */ | |
| /* | |
| * Whittle err down to 16 bits max. 16 significant bits is enough for | |
| * our purposes. | |
| */ | |
| FLAC__ASSERT(err > 0); | |
| bits = FLAC__bitmath_ilog2_wide(err)+1; | |
| if(bits > 16) { | |
| err >>= (bits-16); | |
| fracbits -= (bits-16); | |
| } | |
| rbps = (FLAC__uint32)err; | |
| /* Multiply by fixed-point version of ln(2), with 16 fractional bits */ | |
| rbps *= FLAC__FP_LN2; | |
| fracbits += 16; | |
| FLAC__ASSERT(fracbits >= 0); | |
| /* FLAC__fixedpoint_log2 requires fracbits%4 to be 0 */ | |
| { | |
| const int f = fracbits & 3; | |
| if(f) { | |
| rbps >>= f; | |
| fracbits -= f; | |
| } | |
| } | |
| rbps = FLAC__fixedpoint_log2(rbps, fracbits, (uint32_t)(-1)); | |
| if(rbps == 0) | |
| return 0; | |
| /* | |
| * The return value must have 16 fractional bits. Since the whole part | |
| * of the base-2 log of a 32 bit number must fit in 5 bits, and fracbits | |
| * must be >= -3, these assertion allows us to be able to shift rbps | |
| * left if necessary to get 16 fracbits without losing any bits of the | |
| * whole part of rbps. | |
| * | |
| * There is a slight chance due to accumulated error that the whole part | |
| * will require 6 bits, so we use 6 in the assertion. Really though as | |
| * long as it fits in 13 bits (32 - (16 - (-3))) we are fine. | |
| */ | |
| FLAC__ASSERT((int)FLAC__bitmath_ilog2(rbps)+1 <= fracbits + 6); | |
| FLAC__ASSERT(fracbits >= -3); | |
| /* now shift the decimal point into place */ | |
| if(fracbits < 16) | |
| return rbps << (16-fracbits); | |
| else if(fracbits > 16) | |
| return rbps >> (fracbits-16); | |
| else | |
| return rbps; | |
| } | |
| #endif | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| uint32_t FLAC__fixed_compute_best_predictor(const FLAC__int32 data[], uint32_t data_len, float residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #else | |
| uint32_t FLAC__fixed_compute_best_predictor(const FLAC__int32 data[], uint32_t data_len, FLAC__fixedpoint residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #endif | |
| { | |
| FLAC__uint32 total_error_0 = 0, total_error_1 = 0, total_error_2 = 0, total_error_3 = 0, total_error_4 = 0; | |
| uint32_t order; | |
| #if 0 | |
| /* This code has been around a long time, and was written when compilers weren't able | |
| * to vectorize code. These days, compilers are better in optimizing the next block | |
| * which is also much more readable | |
| */ | |
| FLAC__int32 last_error_0 = data[-1]; | |
| FLAC__int32 last_error_1 = data[-1] - data[-2]; | |
| FLAC__int32 last_error_2 = last_error_1 - (data[-2] - data[-3]); | |
| FLAC__int32 last_error_3 = last_error_2 - (data[-2] - 2*data[-3] + data[-4]); | |
| FLAC__int32 error, save; | |
| uint32_t i; | |
| /* total_error_* are 64-bits to avoid overflow when encoding | |
| * erratic signals when the bits-per-sample and blocksize are | |
| * large. | |
| */ | |
| for(i = 0; i < data_len; i++) { | |
| error = data[i] ; total_error_0 += local_abs(error); save = error; | |
| error -= last_error_0; total_error_1 += local_abs(error); last_error_0 = save; save = error; | |
| error -= last_error_1; total_error_2 += local_abs(error); last_error_1 = save; save = error; | |
| error -= last_error_2; total_error_3 += local_abs(error); last_error_2 = save; save = error; | |
| error -= last_error_3; total_error_4 += local_abs(error); last_error_3 = save; | |
| } | |
| #else | |
| int i; | |
| for(i = 0; i < (int)data_len; i++) { | |
| total_error_0 += local_abs(data[i]); | |
| total_error_1 += local_abs(data[i] - data[i-1]); | |
| total_error_2 += local_abs(data[i] - 2 * data[i-1] + data[i-2]); | |
| total_error_3 += local_abs(data[i] - 3 * data[i-1] + 3 * data[i-2] - data[i-3]); | |
| total_error_4 += local_abs(data[i] - 4 * data[i-1] + 6 * data[i-2] - 4 * data[i-3] + data[i-4]); | |
| } | |
| #endif | |
| /* prefer lower order */ | |
| if(total_error_0 <= flac_min(flac_min(flac_min(total_error_1, total_error_2), total_error_3), total_error_4)) | |
| order = 0; | |
| else if(total_error_1 <= flac_min(flac_min(total_error_2, total_error_3), total_error_4)) | |
| order = 1; | |
| else if(total_error_2 <= flac_min(total_error_3, total_error_4)) | |
| order = 2; | |
| else if(total_error_3 <= total_error_4) | |
| order = 3; | |
| else | |
| order = 4; | |
| /* Estimate the expected number of bits per residual signal sample. */ | |
| /* 'total_error*' is linearly related to the variance of the residual */ | |
| /* signal, so we use it directly to compute E(|x|) */ | |
| FLAC__ASSERT(data_len > 0 || total_error_0 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_1 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_2 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_3 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_4 == 0); | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| residual_bits_per_sample[0] = (float)((total_error_0 > 0) ? log(M_LN2 * (double)total_error_0 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[1] = (float)((total_error_1 > 0) ? log(M_LN2 * (double)total_error_1 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[2] = (float)((total_error_2 > 0) ? log(M_LN2 * (double)total_error_2 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[3] = (float)((total_error_3 > 0) ? log(M_LN2 * (double)total_error_3 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[4] = (float)((total_error_4 > 0) ? log(M_LN2 * (double)total_error_4 / (double)data_len) / M_LN2 : 0.0); | |
| #else | |
| residual_bits_per_sample[0] = (total_error_0 > 0) ? local__compute_rbps_integerized(total_error_0, data_len) : 0; | |
| residual_bits_per_sample[1] = (total_error_1 > 0) ? local__compute_rbps_integerized(total_error_1, data_len) : 0; | |
| residual_bits_per_sample[2] = (total_error_2 > 0) ? local__compute_rbps_integerized(total_error_2, data_len) : 0; | |
| residual_bits_per_sample[3] = (total_error_3 > 0) ? local__compute_rbps_integerized(total_error_3, data_len) : 0; | |
| residual_bits_per_sample[4] = (total_error_4 > 0) ? local__compute_rbps_integerized(total_error_4, data_len) : 0; | |
| #endif | |
| return order; | |
| } | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| uint32_t FLAC__fixed_compute_best_predictor_wide(const FLAC__int32 data[], uint32_t data_len, float residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #else | |
| uint32_t FLAC__fixed_compute_best_predictor_wide(const FLAC__int32 data[], uint32_t data_len, FLAC__fixedpoint residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #endif | |
| { | |
| FLAC__uint64 total_error_0 = 0, total_error_1 = 0, total_error_2 = 0, total_error_3 = 0, total_error_4 = 0; | |
| uint32_t order; | |
| int i; | |
| for(i = 0; i < (int)data_len; i++) { | |
| total_error_0 += local_abs(data[i]); | |
| total_error_1 += local_abs(data[i] - data[i-1]); | |
| total_error_2 += local_abs(data[i] - 2 * data[i-1] + data[i-2]); | |
| total_error_3 += local_abs(data[i] - 3 * data[i-1] + 3 * data[i-2] - data[i-3]); | |
| total_error_4 += local_abs(data[i] - 4 * data[i-1] + 6 * data[i-2] - 4 * data[i-3] + data[i-4]); | |
| } | |
| /* prefer lower order */ | |
| if(total_error_0 <= flac_min(flac_min(flac_min(total_error_1, total_error_2), total_error_3), total_error_4)) | |
| order = 0; | |
| else if(total_error_1 <= flac_min(flac_min(total_error_2, total_error_3), total_error_4)) | |
| order = 1; | |
| else if(total_error_2 <= flac_min(total_error_3, total_error_4)) | |
| order = 2; | |
| else if(total_error_3 <= total_error_4) | |
| order = 3; | |
| else | |
| order = 4; | |
| /* Estimate the expected number of bits per residual signal sample. */ | |
| /* 'total_error*' is linearly related to the variance of the residual */ | |
| /* signal, so we use it directly to compute E(|x|) */ | |
| FLAC__ASSERT(data_len > 0 || total_error_0 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_1 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_2 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_3 == 0); | |
| FLAC__ASSERT(data_len > 0 || total_error_4 == 0); | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| residual_bits_per_sample[0] = (float)((total_error_0 > 0) ? log(M_LN2 * (double)total_error_0 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[1] = (float)((total_error_1 > 0) ? log(M_LN2 * (double)total_error_1 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[2] = (float)((total_error_2 > 0) ? log(M_LN2 * (double)total_error_2 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[3] = (float)((total_error_3 > 0) ? log(M_LN2 * (double)total_error_3 / (double)data_len) / M_LN2 : 0.0); | |
| residual_bits_per_sample[4] = (float)((total_error_4 > 0) ? log(M_LN2 * (double)total_error_4 / (double)data_len) / M_LN2 : 0.0); | |
| #else | |
| residual_bits_per_sample[0] = (total_error_0 > 0) ? local__compute_rbps_wide_integerized(total_error_0, data_len) : 0; | |
| residual_bits_per_sample[1] = (total_error_1 > 0) ? local__compute_rbps_wide_integerized(total_error_1, data_len) : 0; | |
| residual_bits_per_sample[2] = (total_error_2 > 0) ? local__compute_rbps_wide_integerized(total_error_2, data_len) : 0; | |
| residual_bits_per_sample[3] = (total_error_3 > 0) ? local__compute_rbps_wide_integerized(total_error_3, data_len) : 0; | |
| residual_bits_per_sample[4] = (total_error_4 > 0) ? local__compute_rbps_wide_integerized(total_error_4, data_len) : 0; | |
| #endif | |
| return order; | |
| } | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| #define CHECK_ORDER_IS_VALID(macro_order) \ | |
| if(order_##macro_order##_is_valid && total_error_##macro_order < smallest_error) { \ | |
| order = macro_order; \ | |
| smallest_error = total_error_##macro_order ; \ | |
| residual_bits_per_sample[ macro_order ] = (float)((total_error_0 > 0) ? log(M_LN2 * (double)total_error_0 / (double)data_len) / M_LN2 : 0.0); \ | |
| } \ | |
| else \ | |
| residual_bits_per_sample[ macro_order ] = 34.0f; | |
| #else | |
| #define CHECK_ORDER_IS_VALID(macro_order) \ | |
| if(order_##macro_order##_is_valid && total_error_##macro_order < smallest_error) { \ | |
| order = macro_order; \ | |
| smallest_error = total_error_##macro_order ; \ | |
| residual_bits_per_sample[ macro_order ] = (total_error_##macro_order > 0) ? local__compute_rbps_wide_integerized(total_error_##macro_order, data_len) : 0; \ | |
| } \ | |
| else \ | |
| residual_bits_per_sample[ macro_order ] = 34 * FLAC__FP_ONE; | |
| #endif | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| uint32_t FLAC__fixed_compute_best_predictor_limit_residual(const FLAC__int32 data[], uint32_t data_len, float residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #else | |
| uint32_t FLAC__fixed_compute_best_predictor_limit_residual(const FLAC__int32 data[], uint32_t data_len, FLAC__fixedpoint residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #endif | |
| { | |
| FLAC__uint64 total_error_0 = 0, total_error_1 = 0, total_error_2 = 0, total_error_3 = 0, total_error_4 = 0, smallest_error = UINT64_MAX; | |
| FLAC__uint64 error_0, error_1, error_2, error_3, error_4; | |
| FLAC__bool order_0_is_valid = true, order_1_is_valid = true, order_2_is_valid = true, order_3_is_valid = true, order_4_is_valid = true; | |
| uint32_t order = 0; | |
| int i; | |
| for(i = -4; i < (int)data_len; i++) { | |
| error_0 = local_abs64((FLAC__int64)data[i]); | |
| error_1 = (i > -4) ? local_abs64((FLAC__int64)data[i] - data[i-1]) : 0 ; | |
| error_2 = (i > -3) ? local_abs64((FLAC__int64)data[i] - 2 * (FLAC__int64)data[i-1] + data[i-2]) : 0; | |
| error_3 = (i > -2) ? local_abs64((FLAC__int64)data[i] - 3 * (FLAC__int64)data[i-1] + 3 * (FLAC__int64)data[i-2] - data[i-3]) : 0; | |
| error_4 = (i > -1) ? local_abs64((FLAC__int64)data[i] - 4 * (FLAC__int64)data[i-1] + 6 * (FLAC__int64)data[i-2] - 4 * (FLAC__int64)data[i-3] + data[i-4]) : 0; | |
| total_error_0 += error_0; | |
| total_error_1 += error_1; | |
| total_error_2 += error_2; | |
| total_error_3 += error_3; | |
| total_error_4 += error_4; | |
| /* residual must not be INT32_MIN because abs(INT32_MIN) is undefined */ | |
| if(error_0 > INT32_MAX) | |
| order_0_is_valid = false; | |
| if(error_1 > INT32_MAX) | |
| order_1_is_valid = false; | |
| if(error_2 > INT32_MAX) | |
| order_2_is_valid = false; | |
| if(error_3 > INT32_MAX) | |
| order_3_is_valid = false; | |
| if(error_4 > INT32_MAX) | |
| order_4_is_valid = false; | |
| } | |
| CHECK_ORDER_IS_VALID(0); | |
| CHECK_ORDER_IS_VALID(1); | |
| CHECK_ORDER_IS_VALID(2); | |
| CHECK_ORDER_IS_VALID(3); | |
| CHECK_ORDER_IS_VALID(4); | |
| return order; | |
| } | |
| #ifndef FLAC__INTEGER_ONLY_LIBRARY | |
| uint32_t FLAC__fixed_compute_best_predictor_limit_residual_33bit(const FLAC__int64 data[], uint32_t data_len, float residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #else | |
| uint32_t FLAC__fixed_compute_best_predictor_limit_residual_33bit(const FLAC__int64 data[], uint32_t data_len, FLAC__fixedpoint residual_bits_per_sample[FLAC__MAX_FIXED_ORDER+1]) | |
| #endif | |
| { | |
| FLAC__uint64 total_error_0 = 0, total_error_1 = 0, total_error_2 = 0, total_error_3 = 0, total_error_4 = 0, smallest_error = UINT64_MAX; | |
| FLAC__uint64 error_0, error_1, error_2, error_3, error_4; | |
| FLAC__bool order_0_is_valid = true, order_1_is_valid = true, order_2_is_valid = true, order_3_is_valid = true, order_4_is_valid = true; | |
| uint32_t order = 0; | |
| int i; | |
| for(i = -4; i < (int)data_len; i++) { | |
| error_0 = local_abs64(data[i]); | |
| error_1 = (i > -4) ? local_abs64(data[i] - data[i-1]) : 0 ; | |
| error_2 = (i > -3) ? local_abs64(data[i] - 2 * data[i-1] + data[i-2]) : 0; | |
| error_3 = (i > -2) ? local_abs64(data[i] - 3 * data[i-1] + 3 * data[i-2] - data[i-3]) : 0; | |
| error_4 = (i > -1) ? local_abs64(data[i] - 4 * data[i-1] + 6 * data[i-2] - 4 * data[i-3] + data[i-4]) : 0; | |
| total_error_0 += error_0; | |
| total_error_1 += error_1; | |
| total_error_2 += error_2; | |
| total_error_3 += error_3; | |
| total_error_4 += error_4; | |
| /* residual must not be INT32_MIN because abs(INT32_MIN) is undefined */ | |
| if(error_0 > INT32_MAX) | |
| order_0_is_valid = false; | |
| if(error_1 > INT32_MAX) | |
| order_1_is_valid = false; | |
| if(error_2 > INT32_MAX) | |
| order_2_is_valid = false; | |
| if(error_3 > INT32_MAX) | |
| order_3_is_valid = false; | |
| if(error_4 > INT32_MAX) | |
| order_4_is_valid = false; | |
| } | |
| CHECK_ORDER_IS_VALID(0); | |
| CHECK_ORDER_IS_VALID(1); | |
| CHECK_ORDER_IS_VALID(2); | |
| CHECK_ORDER_IS_VALID(3); | |
| CHECK_ORDER_IS_VALID(4); | |
| return order; | |
| } | |
| void FLAC__fixed_compute_residual(const FLAC__int32 data[], uint32_t data_len, uint32_t order, FLAC__int32 residual[]) | |
| { | |
| const int idata_len = (int)data_len; | |
| int i; | |
| switch(order) { | |
| case 0: | |
| FLAC__ASSERT(sizeof(residual[0]) == sizeof(data[0])); | |
| memcpy(residual, data, sizeof(residual[0])*data_len); | |
| break; | |
| case 1: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - data[i-1]; | |
| break; | |
| case 2: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - 2*data[i-1] + data[i-2]; | |
| break; | |
| case 3: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - 3*data[i-1] + 3*data[i-2] - data[i-3]; | |
| break; | |
| case 4: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - 4*data[i-1] + 6*data[i-2] - 4*data[i-3] + data[i-4]; | |
| break; | |
| default: | |
| FLAC__ASSERT(0); | |
| } | |
| } | |
| void FLAC__fixed_compute_residual_wide(const FLAC__int32 data[], uint32_t data_len, uint32_t order, FLAC__int32 residual[]) | |
| { | |
| const int idata_len = (int)data_len; | |
| int i; | |
| switch(order) { | |
| case 0: | |
| FLAC__ASSERT(sizeof(residual[0]) == sizeof(data[0])); | |
| memcpy(residual, data, sizeof(residual[0])*data_len); | |
| break; | |
| case 1: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = (FLAC__int64)data[i] - data[i-1]; | |
| break; | |
| case 2: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = (FLAC__int64)data[i] - 2*(FLAC__int64)data[i-1] + data[i-2]; | |
| break; | |
| case 3: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = (FLAC__int64)data[i] - 3*(FLAC__int64)data[i-1] + 3*(FLAC__int64)data[i-2] - data[i-3]; | |
| break; | |
| case 4: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = (FLAC__int64)data[i] - 4*(FLAC__int64)data[i-1] + 6*(FLAC__int64)data[i-2] - 4*(FLAC__int64)data[i-3] + data[i-4]; | |
| break; | |
| default: | |
| FLAC__ASSERT(0); | |
| } | |
| } | |
| void FLAC__fixed_compute_residual_wide_33bit(const FLAC__int64 data[], uint32_t data_len, uint32_t order, FLAC__int32 residual[]) | |
| { | |
| const int idata_len = (int)data_len; | |
| int i; | |
| switch(order) { | |
| case 0: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i]; | |
| break; | |
| case 1: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - data[i-1]; | |
| break; | |
| case 2: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - 2*data[i-1] + data[i-2]; | |
| break; | |
| case 3: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - 3*data[i-1] + 3*data[i-2] - data[i-3]; | |
| break; | |
| case 4: | |
| for(i = 0; i < idata_len; i++) | |
| residual[i] = data[i] - 4*data[i-1] + 6*data[i-2] - 4*data[i-3] + data[i-4]; | |
| break; | |
| default: | |
| FLAC__ASSERT(0); | |
| } | |
| } | |
| #if defined(FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION) && !defined(FUZZING_BUILD_MODE_FLAC_SANITIZE_SIGNED_INTEGER_OVERFLOW) | |
| /* The attribute below is to silence the undefined sanitizer of oss-fuzz. | |
| * Because fuzzing feeds bogus predictors and residual samples to the | |
| * decoder, having overflows in this section is unavoidable. Also, | |
| * because the calculated values are audio path only, there is no | |
| * potential for security problems */ | |
| __attribute__((no_sanitize("signed-integer-overflow"))) | |
| #endif | |
| void FLAC__fixed_restore_signal(const FLAC__int32 residual[], uint32_t data_len, uint32_t order, FLAC__int32 data[]) | |
| { | |
| int i, idata_len = (int)data_len; | |
| switch(order) { | |
| case 0: | |
| FLAC__ASSERT(sizeof(residual[0]) == sizeof(data[0])); | |
| memcpy(data, residual, sizeof(residual[0])*data_len); | |
| break; | |
| case 1: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = residual[i] + data[i-1]; | |
| break; | |
| case 2: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = residual[i] + 2*data[i-1] - data[i-2]; | |
| break; | |
| case 3: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = residual[i] + 3*data[i-1] - 3*data[i-2] + data[i-3]; | |
| break; | |
| case 4: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = residual[i] + 4*data[i-1] - 6*data[i-2] + 4*data[i-3] - data[i-4]; | |
| break; | |
| default: | |
| FLAC__ASSERT(0); | |
| } | |
| } | |
| void FLAC__fixed_restore_signal_wide(const FLAC__int32 residual[], uint32_t data_len, uint32_t order, FLAC__int32 data[]) | |
| { | |
| int i, idata_len = (int)data_len; | |
| switch(order) { | |
| case 0: | |
| FLAC__ASSERT(sizeof(residual[0]) == sizeof(data[0])); | |
| memcpy(data, residual, sizeof(residual[0])*data_len); | |
| break; | |
| case 1: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + (FLAC__int64)data[i-1]; | |
| break; | |
| case 2: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + 2*(FLAC__int64)data[i-1] - (FLAC__int64)data[i-2]; | |
| break; | |
| case 3: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + 3*(FLAC__int64)data[i-1] - 3*(FLAC__int64)data[i-2] + (FLAC__int64)data[i-3]; | |
| break; | |
| case 4: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + 4*(FLAC__int64)data[i-1] - 6*(FLAC__int64)data[i-2] + 4*(FLAC__int64)data[i-3] - (FLAC__int64)data[i-4]; | |
| break; | |
| default: | |
| FLAC__ASSERT(0); | |
| } | |
| } | |
| #if defined(FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION) && !defined(FUZZING_BUILD_MODE_FLAC_SANITIZE_SIGNED_INTEGER_OVERFLOW) | |
| /* The attribute below is to silence the undefined sanitizer of oss-fuzz. | |
| * Because fuzzing feeds bogus predictors and residual samples to the | |
| * decoder, having overflows in this section is unavoidable. Also, | |
| * because the calculated values are audio path only, there is no | |
| * potential for security problems */ | |
| __attribute__((no_sanitize("signed-integer-overflow"))) | |
| #endif | |
| void FLAC__fixed_restore_signal_wide_33bit(const FLAC__int32 residual[], uint32_t data_len, uint32_t order, FLAC__int64 data[]) | |
| { | |
| int i, idata_len = (int)data_len; | |
| switch(order) { | |
| case 0: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = residual[i]; | |
| break; | |
| case 1: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + data[i-1]; | |
| break; | |
| case 2: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + 2*data[i-1] - data[i-2]; | |
| break; | |
| case 3: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + 3*data[i-1] - 3*data[i-2] + data[i-3]; | |
| break; | |
| case 4: | |
| for(i = 0; i < idata_len; i++) | |
| data[i] = (FLAC__int64)residual[i] + 4*data[i-1] - 6*data[i-2] + 4*data[i-3] - data[i-4]; | |
| break; | |
| default: | |
| FLAC__ASSERT(0); | |
| } | |
| } |