blob: 68004520a164cd0db7f22c70ca412550888a4f0a [file] [log] [blame]
#!/usr/bin/env bash
#
# Copyright (C) 2013 eNovance SAS <licensing@enovance.com>
# Author: Erwan Velu <erwan@enovance.com>
#
# The license below covers all files distributed with fio unless otherwise
# noted in the file itself.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
BLK_SIZE=
BLOCK_SIZE=4k
SEQ=-1
TEMPLATE=/tmp/template.fio
OUTFILE=
DISKS=
PRINTABLE_DISKS=
RUNTIME=300
ETA=0
MODES="write,randwrite,read,randread"
SHORT_HOSTNAME=
CACHED_IO="FALSE"
PREFIX=""
PREFIX_FILENAME=""
IODEPTH=1
show_help() {
PROG=$(basename $0)
echo "usage of $PROG:"
cat << EOF
-h : Show this help & exit
-c : Enable cached-based IOs
Disabled by default
-a : Run sequential test then parallel one
Disabled by default
-s : Run sequential test (default value)
one test after another then one disk after another
Disabled by default
-p : Run parallel test
one test after anoter but all disks at the same time
Enabled by default
-D iodepth : Run with the specified iodepth
Default is $IODEPTH
-d disk1[,disk2,disk3,..] : Run the tests on the selected disks
Separated each disk with a comma
-z filesize : Specify the working file size, if you are passing filepaths to -d
Disabled by default
-r seconds : Time in seconds per benchmark
0 means till the end of the device
Default is $RUNTIME seconds
-b blocksize[,blocksize1, ...] : The blocksizes to test under fio format (4k, 1m, ...)
Separated each blocksize with a comma
Default is $BLOCK_SIZE
-m mode1,[mode2,mode3, ...] : Define the fio IO profile to use like read, write, randread, randwrite
Default is "$MODES"
-x prefix : Add a prefix to the fio filename
Useful to let a context associated with the file
If the prefix features a / (slash), prefix will be considered as a directory
-A cmd_to_run : System command to run after each job (exec_postrun in fio)
-B cmd_to_run : System command to run before each job (exec_prerun in fio)
Example:
$PROG -d /dev/sdb,/dev/sdc,/dev/sdd,/dev/sde -a -b 4k,128k,1m -r 100 -a -x dellr720-day2/
Will generate an fio file that will run
- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 4k with write,randwrite,read,randread tests
ETA ~ 4 tests * 4 disks * 100 seconds
- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 128k with write,randwrite,read,randread tests
ETA ~ 4 tests * 4 disks * 100 seconds
- a sequential bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 1m with write,randwrite,read,randread tests
ETA ~ 4 tests * 4 disks * 100 seconds
- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 4k with write,randwrite,read,randread tests
ETA ~ 4 tests * 100 seconds
- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 128k with write,randwrite,read,randread tests
ETA ~ 4 tests * 100 seconds
- a parallel bench on /dev/sdb /dev/sdc /dev/sdd /dev/sde for block size = 1m with write,randwrite,read,randread tests
ETA ~ 4 tests * 100 seconds
Generating dellr720-day2/localhost-4k,128k,1m-all-write,randwrite,read,randread-sdb,sdc,sdd,sde.fio
Estimated Time = 6000 seconds : 1 hour 40 minutes
EOF
}
finish_template() {
echo "iodepth=$IODEPTH" >> $TEMPLATE
if [ "$RUNTIME" != "0" ]; then
echo "runtime=$RUNTIME" >> $TEMPLATE
echo "time_based" >> $TEMPLATE
fi
if [ "$CACHED_IO" = "FALSE" ]; then
echo "direct=1" >> $TEMPLATE
fi
}
diskname_to_printable() {
COUNT=0
for disk in $(echo $@ | tr "," " "); do
R=$(basename $disk | sed 's|/|_|g')
COUNT=$(($COUNT + 1))
if [ $COUNT -eq 1 ]; then
P="$R"
else
P="$P,$R"
fi
done
echo $P
}
gen_template() {
cat >$TEMPLATE << EOF
[global]
ioengine=libaio
invalidate=1
ramp_time=5
EOF
}
gen_seq_suite() {
TYPE=$1
disk=$2
PRINTABLE_DISK=$(diskname_to_printable $disk)
cat >> $OUTFILE << EOF
[$TYPE-$PRINTABLE_DISK-$BLK_SIZE-seq]
stonewall
bs=$BLK_SIZE
filename=$disk
rw=$TYPE
write_bw_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-seq.results
write_iops_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-seq.results
EOF
ETA=$(($ETA + $RUNTIME))
}
gen_seq_fio() {
for disk in $(echo $DISKS | tr "," " "); do
for mode in $(echo $MODES | tr "," " "); do
gen_seq_suite "$mode" "$disk"
done
done
}
gen_para_suite() {
TYPE=$1
NEED_WALL=$2
D=0
for disk in $(echo $DISKS | tr "," " "); do
PRINTABLE_DISK=$(diskname_to_printable $disk)
cat >> $OUTFILE << EOF
[$TYPE-$PRINTABLE_DISK-$BLK_SIZE-para]
bs=$BLK_SIZE
EOF
if [ "$D" = 0 ]; then
echo "stonewall" >> $OUTFILE
D=1
fi
cat >> $OUTFILE << EOF
filename=$disk
rw=$TYPE
write_bw_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-para.results
write_iops_log=${PREFIX_FILENAME}$SHORT_HOSTNAME-$BLK_SIZE-$PRINTABLE_DISK-$TYPE-para.results
EOF
done
ETA=$(($ETA + $RUNTIME))
echo >> $OUTFILE
}
gen_para_fio() {
for mode in $(echo $MODES | tr "," " "); do
gen_para_suite "$mode"
done
}
gen_fio() {
case $SEQ in
2)
gen_seq_fio
gen_para_fio
;;
1)
gen_seq_fio
;;
0)
gen_para_fio
;;
esac
}
parse_cmdline() {
while getopts "hacpsd:b:r:m:x:z:D:A:B:" opt; do
case $opt in
h)
show_help
exit 0
;;
b)
BLOCK_SIZE=$OPTARG
;;
c)
CACHED_IO="TRUE"
;;
s)
if [ "$SEQ" = "-1" ]; then
SEQ=1
fi
;;
x)
PREFIX=$OPTARG
echo "$PREFIX" | grep -q "/"
if [ "$?" -eq 0 ]; then
mkdir -p $PREFIX
# No need to keep the prefix for the log files
# we do have a directory for that
PREFIX_FILENAME=""
else
# We need to keep the prefix for the log files
PREFIX_FILENAME=$PREFIX
fi
;;
r)
RUNTIME=$OPTARG
;;
p)
if [ "$SEQ" = "-1" ]; then
SEQ=0
fi
;;
m)
MODES=$OPTARG;
;;
d)
DISKS=$OPTARG
PRINTABLE_DISKS=$(diskname_to_printable "$DISKS")
;;
D)
IODEPTH=$OPTARG
;;
a)
SEQ=2
;;
B)
echo "exec_prerun=$OPTARG" >> $TEMPLATE
;;
A)
echo "exec_postrun=$OPTARG" >> $TEMPLATE
;;
z)
FSIZE=$OPTARG
echo "size=$FSIZE" >> $TEMPLATE
;;
\?)
echo "Invalid option: -$OPTARG" >&2
;;
esac
done
if [ "$SEQ" = "-1" ]; then
SEQ=0
fi
SHORT_HOSTNAME=$(hostname -s)
case $SEQ in
2)
OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-all-$MODES-$PRINTABLE_DISKS.fio
;;
1)
OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-sequential-$MODES-$PRINTABLE_DISKS.fio
;;
0)
OUTFILE=${PREFIX}$SHORT_HOSTNAME-$BLOCK_SIZE-parallel-$MODES-$PRINTABLE_DISKS.fio
;;
esac
if [ -z "$DISKS" ]; then
echo "Missing DISKS !"
echo "Please read the help !"
show_help
exit 1
fi
}
check_mode_order() {
FOUND_WRITE="NO"
CAUSE="You are reading data before writing them "
# If no write occurs, let's show a different message
echo $MODES | grep -q "write"
if [ "$?" -ne 0 ]; then
CAUSE="You are reading data while never wrote them before"
fi
for mode in $(echo $MODES | tr "," " "); do
echo $mode | grep -q write
if [ "$?" -eq 0 ]; then
FOUND_WRITE="YES"
fi
echo $mode | grep -q "read"
if [ "$?" -eq 0 ]; then
if [ "$FOUND_WRITE" = "NO" ]; then
echo "###############################################################"
echo "# Warning : $CAUSE#"
echo "# On some storage devices, this could lead to invalid results #"
echo "# #"
echo "# Press Ctrl-C to adjust pattern order if you have doubts #"
echo "# Or Wait 5 seconds before the file will be created #"
echo "###############################################################"
sleep 5
# No need to try showing the message more than one time
return
fi
fi
done
}
########## MAIN
gen_template
parse_cmdline "$@"
finish_template
check_mode_order
echo "Generating $OUTFILE"
cp -f $TEMPLATE $OUTFILE
echo >> $OUTFILE
for BLK_SIZE in $(echo $BLOCK_SIZE | tr "," " "); do
gen_fio
done
ETA_H=$(($ETA / 3600))
ETA_M=$((($ETA - ($ETA_H*3600)) / 60))
if [ "$ETA" = "0" ]; then
echo "Cannot estimate ETA as RUNTIME=0"
else
echo "Estimated Time = $ETA seconds : $ETA_H hour $ETA_M minutes"
fi