| #! /bin/sh |
| # Copyright (C) 2018 Red Hat, Inc. |
| # This file is part of elfutils. |
| # |
| # This file is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # elfutils is distributed in the hope that it will be useful, but |
| # WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| . $srcdir/test-subr.sh |
| |
| # See run-readelf-loc.sh |
| |
| testfiles testfileloc |
| |
| # Process values as offsets from base addresses and resolve to symbols. |
| testrun_compare ${abs_top_builddir}/src/readelf --debug-dump=ranges testfileloc<<\EOF |
| |
| DWARF section [34] '.debug_ranges' at offset 0xd94: |
| |
| CU [ b] base: 0x0000000000400480 <main> |
| [ 0] range 0, 2 |
| 0x0000000000400480 <main>.. |
| 0x0000000000400481 <main+0x1> |
| range 5, d |
| 0x0000000000400485 <main+0x5>.. |
| 0x000000000040048c <main+0xc> |
| |
| CU [ e0] base: 0x00000000004004a0 <say> |
| [ 30] range d, f |
| 0x00000000004004ad <say+0xd>.. |
| 0x00000000004004ae <say+0xe> |
| range 12, 1a |
| 0x00000000004004b2 <say+0x12>.. |
| 0x00000000004004b9 <say+0x19> |
| EOF |
| |
| # Don't resolve addresses to symbols. |
| testrun_compare ${abs_top_builddir}/src/readelf -N --debug-dump=ranges testfileloc<<\EOF |
| |
| DWARF section [34] '.debug_ranges' at offset 0xd94: |
| |
| CU [ b] base: 0x0000000000400480 |
| [ 0] range 0, 2 |
| 0x0000000000400480.. |
| 0x0000000000400481 |
| range 5, d |
| 0x0000000000400485.. |
| 0x000000000040048c |
| |
| CU [ e0] base: 0x00000000004004a0 |
| [ 30] range d, f |
| 0x00000000004004ad.. |
| 0x00000000004004ae |
| range 12, 1a |
| 0x00000000004004b2.. |
| 0x00000000004004b9 |
| EOF |
| |
| # Produce "raw" unprocessed content. |
| testrun_compare ${abs_top_builddir}/src/readelf -U --debug-dump=ranges testfileloc<<\EOF |
| |
| DWARF section [34] '.debug_ranges' at offset 0xd94: |
| |
| CU [ b] base: 0x0000000000400480 |
| [ 0] range 0, 2 |
| range 5, d |
| |
| CU [ e0] base: 0x00000000004004a0 |
| [ 30] range d, f |
| range 12, 1a |
| EOF |
| |
| # .debug_rnglists (DWARF5), see tests/testfile-dwarf-45.source |
| testfiles testfile-dwarf-5 |
| testrun_compare ${abs_top_builddir}/src/readelf --debug-dump=ranges testfile-dwarf-5<<\EOF |
| |
| DWARF section [33] '.debug_rnglists' at offset 0x1d9a: |
| Table at Offset 0x0: |
| |
| Length: 45 |
| DWARF version: 5 |
| Address size: 8 |
| Segment size: 0 |
| Offset entries: 0 |
| CU [ 218] base: 000000000000000000 |
| |
| Offset: c, Index: 0 |
| base_address 0x400583 |
| 0x0000000000400583 <calc+0x13> |
| offset_pair 0, 2 |
| 0x0000000000400583 <calc+0x13>.. |
| 0x0000000000400584 <calc+0x14> |
| offset_pair 5, 15 |
| 0x0000000000400588 <calc+0x18>.. |
| 0x0000000000400597 <calc+0x27> |
| end_of_list |
| |
| Offset: 1c, Index: 10 |
| start_length 0x400570, 2b |
| 0x0000000000400570 <calc>.. |
| 0x000000000040059a <calc+0x2a> |
| start_length 0x400410, 20 |
| 0x0000000000400410 <main>.. |
| 0x000000000040042f <main+0x1f> |
| end_of_list |
| |
| EOF |
| |
| # Same as above, but for DWARF4, note no header, and base address is not |
| # given, but ranges are the same. |
| testfiles testfile-dwarf-4 |
| testrun_compare ${abs_top_builddir}/src/readelf --debug-dump=ranges testfile-dwarf-4<<\EOF |
| |
| DWARF section [32] '.debug_ranges' at offset 0x1f96: |
| |
| CU [ 21c] base: 000000000000000000 |
| [ 0] range 400583, 400585 |
| 0x0000000000400583 <calc+0x13>.. |
| 0x0000000000400584 <calc+0x14> |
| range 400588, 400598 |
| 0x0000000000400588 <calc+0x18>.. |
| 0x0000000000400597 <calc+0x27> |
| [ 30] range 400570, 40059b |
| 0x0000000000400570 <calc>.. |
| 0x000000000040059a <calc+0x2a> |
| range 400410, 400430 |
| 0x0000000000400410 <main>.. |
| 0x000000000040042f <main+0x1f> |
| EOF |
| |
| # Now with split dwarf. See tests/testfile-dwarf-45.source. |
| # Note that this will have an offsets table that the .dwo can refer to. |
| testfiles testfile-splitdwarf-5 testfile-hello5.dwo testfile-world5.dwo |
| testrun_compare ${abs_top_builddir}/src/readelf --debug-dump=ranges testfile-splitdwarf-5<<\EOF |
| |
| DWARF section [35] '.debug_rnglists' at offset 0x393a: |
| Table at Offset 0x0: |
| |
| Length: 53 |
| DWARF version: 5 |
| Address size: 8 |
| Segment size: 0 |
| Offset entries: 2 |
| CU [ 49] base: 000000000000000000 |
| |
| Offsets starting at 0xc: |
| [ 0] 0x8 |
| [ 1] 0x18 |
| |
| Offset: 14, Index: 8 |
| base_address 0x4011d3 |
| 0x00000000004011d3 <calc+0x13> |
| offset_pair 0, 2 |
| 0x00000000004011d3 <calc+0x13>.. |
| 0x00000000004011d4 <calc+0x14> |
| offset_pair 5, 15 |
| 0x00000000004011d8 <calc+0x18>.. |
| 0x00000000004011e7 <calc+0x27> |
| end_of_list |
| |
| Offset: 24, Index: 18 |
| start_length 0x4011c0, 2b |
| 0x00000000004011c0 <calc>.. |
| 0x00000000004011ea <calc+0x2a> |
| start_length 0x401060, 20 |
| 0x0000000000401060 <main>.. |
| 0x000000000040107f <main+0x1f> |
| end_of_list |
| |
| EOF |
| |
| # Note that the rnglist_base attribute of the second CU points to the offsets |
| # above 0xc [c]. |
| testrun_compare ${abs_top_builddir}/src/readelf --debug-dump=info testfile-splitdwarf-5<<\EOF |
| |
| DWARF section [28] '.debug_info' at offset 0x3102: |
| [Offset] |
| Compilation unit at offset 0: |
| Version: 5, Abbreviation section offset: 0, Address size: 8, Offset size: 4 |
| Unit type: skeleton (4), Unit id: 0xc422aa5c31fec205 |
| [ 14] skeleton_unit abbrev: 1 |
| low_pc (addr) 0x0000000000401160 <foo> |
| high_pc (data8) 81 (0x00000000004011b1) |
| stmt_list (sec_offset) 0 |
| dwo_name (strp) "testfile-hello5.dwo" |
| comp_dir (strp) "/home/mark/src/elfutils/tests" |
| GNU_pubnames (flag_present) yes |
| addr_base (sec_offset) address base [ 8] |
| Compilation unit at offset 53: |
| Version: 5, Abbreviation section offset: 21, Address size: 8, Offset size: 4 |
| Unit type: skeleton (4), Unit id: 0xb6c8b9d97e6dfdfe |
| [ 49] skeleton_unit abbrev: 1 |
| ranges (sec_offset) range list [ 24] |
| low_pc (addr) 000000000000000000 |
| stmt_list (sec_offset) 655 |
| dwo_name (strp) "testfile-world5.dwo" |
| comp_dir (strp) "/home/mark/src/elfutils/tests" |
| GNU_pubnames (flag_present) yes |
| addr_base (sec_offset) address base [ a8] |
| rnglists_base (sec_offset) range list [ c] |
| EOF |
| |
| # Same for DWARF4 GNU DebugFission. But now we need to scan the .dwo |
| # explicitly to know it will use the first ranges. |
| testfiles testfile-splitdwarf-4 testfile-hello4.dwo testfile-world4.dwo |
| testrun_compare ${abs_top_builddir}/src/readelf --debug-dump=ranges testfile-splitdwarf-4<<\EOF |
| |
| DWARF section [32] '.debug_ranges' at offset 0x3611: |
| |
| CU [ b] base: 000000000000000000 |
| [ 0] range 4011d3, 4011d5 |
| 0x00000000004011d3 <calc+0x13>.. |
| 0x00000000004011d4 <calc+0x14> |
| range 4011d8, 4011e8 |
| 0x00000000004011d8 <calc+0x18>.. |
| 0x00000000004011e7 <calc+0x27> |
| |
| CU [ 3f] base: 000000000000000000 |
| [ 30] range 4011c0, 4011eb |
| 0x00000000004011c0 <calc>.. |
| 0x00000000004011ea <calc+0x2a> |
| range 401060, 401080 |
| 0x0000000000401060 <main>.. |
| 0x000000000040107f <main+0x1f> |
| EOF |
| |
| exit 0 |
