| /*************************************************************************** | |
| * _ _ ____ _ | |
| * Project ___| | | | _ \| | | |
| * / __| | | | |_) | | | |
| * | (__| |_| | _ <| |___ | |
| * \___|\___/|_| \_\_____| | |
| * | |
| * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al. | |
| * | |
| * This software is licensed as described in the file COPYING, which | |
| * you should have received as part of this distribution. The terms | |
| * are also available at https://curl.se/docs/copyright.html. | |
| * | |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell | |
| * copies of the Software, and permit persons to whom the Software is | |
| * furnished to do so, under the terms of the COPYING file. | |
| * | |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | |
| * KIND, either express or implied. | |
| * | |
| * SPDX-License-Identifier: curl | |
| * | |
| ***************************************************************************/ | |
| #include "tool_setup.h" | |
| #ifndef CURL_DISABLE_LIBCURL_OPTION | |
| #define ENABLE_CURLX_PRINTF | |
| /* use our own printf() functions */ | |
| #include "curlx.h" | |
| #include "tool_cfgable.h" | |
| #include "tool_easysrc.h" | |
| #include "tool_setopt.h" | |
| #include "tool_msgs.h" | |
| #include "dynbuf.h" | |
| #include "memdebug.h" /* keep this as LAST include */ | |
| /* Lookup tables for converting setopt values back to symbols */ | |
| /* For enums, values may be in any order. */ | |
| /* For bit masks, put combinations first, then single bits, */ | |
| /* and finally any "NONE" value. */ | |
| #define NV(e) {#e, e} | |
| #define NV1(e, v) {#e, (v)} | |
| #define NVEND {NULL, 0} /* sentinel to mark end of list */ | |
| const struct NameValue setopt_nv_CURLPROXY[] = { | |
| NV(CURLPROXY_HTTP), | |
| NV(CURLPROXY_HTTP_1_0), | |
| NV(CURLPROXY_HTTPS), | |
| NV(CURLPROXY_SOCKS4), | |
| NV(CURLPROXY_SOCKS5), | |
| NV(CURLPROXY_SOCKS4A), | |
| NV(CURLPROXY_SOCKS5_HOSTNAME), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURL_SOCKS_PROXY[] = { | |
| NV(CURLPROXY_SOCKS4), | |
| NV(CURLPROXY_SOCKS5), | |
| NV(CURLPROXY_SOCKS4A), | |
| NV(CURLPROXY_SOCKS5_HOSTNAME), | |
| NVEND, | |
| }; | |
| const struct NameValueUnsigned setopt_nv_CURLHSTS[] = { | |
| NV(CURLHSTS_ENABLE), | |
| NVEND, | |
| }; | |
| const struct NameValueUnsigned setopt_nv_CURLAUTH[] = { | |
| NV(CURLAUTH_ANY), /* combination */ | |
| NV(CURLAUTH_ANYSAFE), /* combination */ | |
| NV(CURLAUTH_BASIC), | |
| NV(CURLAUTH_DIGEST), | |
| NV(CURLAUTH_GSSNEGOTIATE), | |
| NV(CURLAUTH_NTLM), | |
| NV(CURLAUTH_DIGEST_IE), | |
| NV(CURLAUTH_NTLM_WB), | |
| NV(CURLAUTH_ONLY), | |
| NV(CURLAUTH_NONE), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURL_HTTP_VERSION[] = { | |
| NV(CURL_HTTP_VERSION_NONE), | |
| NV(CURL_HTTP_VERSION_1_0), | |
| NV(CURL_HTTP_VERSION_1_1), | |
| NV(CURL_HTTP_VERSION_2_0), | |
| NV(CURL_HTTP_VERSION_2TLS), | |
| NV(CURL_HTTP_VERSION_3), | |
| NV(CURL_HTTP_VERSION_3ONLY), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURL_SSLVERSION[] = { | |
| NV(CURL_SSLVERSION_DEFAULT), | |
| NV(CURL_SSLVERSION_TLSv1), | |
| NV(CURL_SSLVERSION_SSLv2), | |
| NV(CURL_SSLVERSION_SSLv3), | |
| NV(CURL_SSLVERSION_TLSv1_0), | |
| NV(CURL_SSLVERSION_TLSv1_1), | |
| NV(CURL_SSLVERSION_TLSv1_2), | |
| NV(CURL_SSLVERSION_TLSv1_3), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURL_TIMECOND[] = { | |
| NV(CURL_TIMECOND_IFMODSINCE), | |
| NV(CURL_TIMECOND_IFUNMODSINCE), | |
| NV(CURL_TIMECOND_LASTMOD), | |
| NV(CURL_TIMECOND_NONE), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURLFTPSSL_CCC[] = { | |
| NV(CURLFTPSSL_CCC_NONE), | |
| NV(CURLFTPSSL_CCC_PASSIVE), | |
| NV(CURLFTPSSL_CCC_ACTIVE), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURLUSESSL[] = { | |
| NV(CURLUSESSL_NONE), | |
| NV(CURLUSESSL_TRY), | |
| NV(CURLUSESSL_CONTROL), | |
| NV(CURLUSESSL_ALL), | |
| NVEND, | |
| }; | |
| const struct NameValueUnsigned setopt_nv_CURLSSLOPT[] = { | |
| NV(CURLSSLOPT_ALLOW_BEAST), | |
| NV(CURLSSLOPT_NO_REVOKE), | |
| NV(CURLSSLOPT_NO_PARTIALCHAIN), | |
| NV(CURLSSLOPT_REVOKE_BEST_EFFORT), | |
| NV(CURLSSLOPT_NATIVE_CA), | |
| NV(CURLSSLOPT_AUTO_CLIENT_CERT), | |
| NVEND, | |
| }; | |
| const struct NameValue setopt_nv_CURL_NETRC[] = { | |
| NV(CURL_NETRC_IGNORED), | |
| NV(CURL_NETRC_OPTIONAL), | |
| NV(CURL_NETRC_REQUIRED), | |
| NVEND, | |
| }; | |
| /* These options have non-zero default values. */ | |
| static const struct NameValue setopt_nv_CURLNONZERODEFAULTS[] = { | |
| NV1(CURLOPT_SSL_VERIFYPEER, 1), | |
| NV1(CURLOPT_SSL_VERIFYHOST, 1), | |
| NV1(CURLOPT_SSL_ENABLE_NPN, 1), | |
| NV1(CURLOPT_SSL_ENABLE_ALPN, 1), | |
| NV1(CURLOPT_TCP_NODELAY, 1), | |
| NV1(CURLOPT_PROXY_SSL_VERIFYPEER, 1), | |
| NV1(CURLOPT_PROXY_SSL_VERIFYHOST, 1), | |
| NV1(CURLOPT_SOCKS5_AUTH, 1), | |
| NVEND | |
| }; | |
| /* Format and add code; jump to nomem on malloc error */ | |
| #define ADD(args) do { \ | |
| ret = easysrc_add args; \ | |
| if(ret) \ | |
| goto nomem; \ | |
| } while(0) | |
| #define ADDF(args) do { \ | |
| ret = easysrc_addf args; \ | |
| if(ret) \ | |
| goto nomem; \ | |
| } while(0) | |
| #define NULL_CHECK(p) do { \ | |
| if(!p) { \ | |
| ret = CURLE_OUT_OF_MEMORY; \ | |
| goto nomem; \ | |
| } \ | |
| } while(0) | |
| #define DECL0(s) ADD((&easysrc_decl, s)) | |
| #define DECL1(f,a) ADDF((&easysrc_decl, f,a)) | |
| #define DATA0(s) ADD((&easysrc_data, s)) | |
| #define DATA1(f,a) ADDF((&easysrc_data, f,a)) | |
| #define DATA2(f,a,b) ADDF((&easysrc_data, f,a,b)) | |
| #define DATA3(f,a,b,c) ADDF((&easysrc_data, f,a,b,c)) | |
| #define CODE0(s) ADD((&easysrc_code, s)) | |
| #define CODE1(f,a) ADDF((&easysrc_code, f,a)) | |
| #define CODE2(f,a,b) ADDF((&easysrc_code, f,a,b)) | |
| #define CODE3(f,a,b,c) ADDF((&easysrc_code, f,a,b,c)) | |
| #define CLEAN0(s) ADD((&easysrc_clean, s)) | |
| #define CLEAN1(f,a) ADDF((&easysrc_clean, f,a)) | |
| #define REM0(s) ADD((&easysrc_toohard, s)) | |
| #define REM1(f,a) ADDF((&easysrc_toohard, f,a)) | |
| #define REM3(f,a,b,c) ADDF((&easysrc_toohard, f,a,b,c)) | |
| /* Escape string to C string syntax. Return NULL if out of memory. | |
| * Is this correct for those wacky EBCDIC guys? */ | |
| #define MAX_STRING_LENGTH_OUTPUT 2000 | |
| #define ZERO_TERMINATED -1 | |
| static char *c_escape(const char *str, curl_off_t len) | |
| { | |
| const char *s; | |
| unsigned int cutoff = 0; | |
| CURLcode result; | |
| struct curlx_dynbuf escaped; | |
| curlx_dyn_init(&escaped, 4 * MAX_STRING_LENGTH_OUTPUT + 3); | |
| if(len == ZERO_TERMINATED) | |
| len = strlen(str); | |
| if(len > MAX_STRING_LENGTH_OUTPUT) { | |
| /* cap ridiculously long strings */ | |
| len = MAX_STRING_LENGTH_OUTPUT; | |
| cutoff = 3; | |
| } | |
| result = curlx_dyn_addn(&escaped, STRCONST("")); | |
| for(s = str; !result && len; s++, len--) { | |
| /* escape question marks as well, to prevent generating accidental | |
| trigraphs */ | |
| static const char from[] = "\t\r\n?\"\\"; | |
| static const char to[] = "\\t\\r\\n\\?\\\"\\\\"; | |
| const char *p = strchr(from, *s); | |
| if(!p && ISPRINT(*s)) | |
| continue; | |
| result = curlx_dyn_addn(&escaped, str, s - str); | |
| str = s + 1; | |
| if(!result) { | |
| if(p && *p) | |
| result = curlx_dyn_addn(&escaped, to + 2 * (p - from), 2); | |
| else { | |
| result = curlx_dyn_addf(&escaped, | |
| /* Octal escape to avoid >2 digit hex. */ | |
| (len > 1 && ISXDIGIT(s[1])) ? | |
| "\\%03o" : "\\x%02x", | |
| (unsigned int) *(unsigned char *) s); | |
| } | |
| } | |
| } | |
| if(!result) | |
| result = curlx_dyn_addn(&escaped, str, s - str); | |
| if(!result) | |
| (void) !curlx_dyn_addn(&escaped, "...", cutoff); | |
| return curlx_dyn_ptr(&escaped); | |
| } | |
| /* setopt wrapper for enum types */ | |
| CURLcode tool_setopt_enum(CURL *curl, struct GlobalConfig *config, | |
| const char *name, CURLoption tag, | |
| const struct NameValue *nvlist, long lval) | |
| { | |
| CURLcode ret = CURLE_OK; | |
| bool skip = FALSE; | |
| ret = curl_easy_setopt(curl, tag, lval); | |
| if(!lval) | |
| skip = TRUE; | |
| if(config->libcurl && !skip && !ret) { | |
| /* we only use this for real if --libcurl was used */ | |
| const struct NameValue *nv = NULL; | |
| for(nv = nvlist; nv->name; nv++) { | |
| if(nv->value == lval) | |
| break; /* found it */ | |
| } | |
| if(!nv->name) { | |
| /* If no definition was found, output an explicit value. | |
| * This could happen if new values are defined and used | |
| * but the NameValue list is not updated. */ | |
| CODE2("curl_easy_setopt(hnd, %s, %ldL);", name, lval); | |
| } | |
| else { | |
| CODE2("curl_easy_setopt(hnd, %s, (long)%s);", name, nv->name); | |
| } | |
| } | |
| #ifdef DEBUGBUILD | |
| if(ret) | |
| warnf(config, "option %s returned error (%d)", name, (int)ret); | |
| #endif | |
| nomem: | |
| return ret; | |
| } | |
| /* setopt wrapper for bitmasks */ | |
| CURLcode tool_setopt_bitmask(CURL *curl, struct GlobalConfig *config, | |
| const char *name, CURLoption tag, | |
| const struct NameValueUnsigned *nvlist, | |
| long lval) | |
| { | |
| CURLcode ret = CURLE_OK; | |
| bool skip = FALSE; | |
| ret = curl_easy_setopt(curl, tag, lval); | |
| if(!lval) | |
| skip = TRUE; | |
| if(config->libcurl && !skip && !ret) { | |
| /* we only use this for real if --libcurl was used */ | |
| char preamble[80]; | |
| unsigned long rest = (unsigned long)lval; | |
| const struct NameValueUnsigned *nv = NULL; | |
| msnprintf(preamble, sizeof(preamble), | |
| "curl_easy_setopt(hnd, %s, ", name); | |
| for(nv = nvlist; nv->name; nv++) { | |
| if((nv->value & ~ rest) == 0) { | |
| /* all value flags contained in rest */ | |
| rest &= ~ nv->value; /* remove bits handled here */ | |
| CODE3("%s(long)%s%s", | |
| preamble, nv->name, rest ? " |" : ");"); | |
| if(!rest) | |
| break; /* handled them all */ | |
| /* replace with all spaces for continuation line */ | |
| msnprintf(preamble, sizeof(preamble), "%*s", (int)strlen(preamble), | |
| ""); | |
| } | |
| } | |
| /* If any bits have no definition, output an explicit value. | |
| * This could happen if new bits are defined and used | |
| * but the NameValue list is not updated. */ | |
| if(rest) | |
| CODE2("%s%luUL);", preamble, rest); | |
| } | |
| nomem: | |
| return ret; | |
| } | |
| /* Generate code for a struct curl_slist. */ | |
| static CURLcode libcurl_generate_slist(struct curl_slist *slist, int *slistno) | |
| { | |
| CURLcode ret = CURLE_OK; | |
| char *escaped = NULL; | |
| /* May need several slist variables, so invent name */ | |
| *slistno = ++easysrc_slist_count; | |
| DECL1("struct curl_slist *slist%d;", *slistno); | |
| DATA1("slist%d = NULL;", *slistno); | |
| CLEAN1("curl_slist_free_all(slist%d);", *slistno); | |
| CLEAN1("slist%d = NULL;", *slistno); | |
| for(; slist; slist = slist->next) { | |
| Curl_safefree(escaped); | |
| escaped = c_escape(slist->data, ZERO_TERMINATED); | |
| if(!escaped) | |
| return CURLE_OUT_OF_MEMORY; | |
| DATA3("slist%d = curl_slist_append(slist%d, \"%s\");", | |
| *slistno, *slistno, escaped); | |
| } | |
| nomem: | |
| Curl_safefree(escaped); | |
| return ret; | |
| } | |
| static CURLcode libcurl_generate_mime(CURL *curl, | |
| struct GlobalConfig *config, | |
| struct tool_mime *toolmime, | |
| int *mimeno); /* Forward. */ | |
| /* Wrapper to generate source code for a mime part. */ | |
| static CURLcode libcurl_generate_mime_part(CURL *curl, | |
| struct GlobalConfig *config, | |
| struct tool_mime *part, | |
| int mimeno) | |
| { | |
| CURLcode ret = CURLE_OK; | |
| int submimeno = 0; | |
| char *escaped = NULL; | |
| const char *data = NULL; | |
| const char *filename = part->filename; | |
| /* Parts are linked in reverse order. */ | |
| if(part->prev) { | |
| ret = libcurl_generate_mime_part(curl, config, part->prev, mimeno); | |
| if(ret) | |
| return ret; | |
| } | |
| /* Create the part. */ | |
| CODE2("part%d = curl_mime_addpart(mime%d);", mimeno, mimeno); | |
| switch(part->kind) { | |
| case TOOLMIME_PARTS: | |
| ret = libcurl_generate_mime(curl, config, part, &submimeno); | |
| if(!ret) { | |
| CODE2("curl_mime_subparts(part%d, mime%d);", mimeno, submimeno); | |
| CODE1("mime%d = NULL;", submimeno); /* Avoid freeing in CLEAN. */ | |
| } | |
| break; | |
| case TOOLMIME_DATA: | |
| data = part->data; | |
| if(!ret) { | |
| Curl_safefree(escaped); | |
| escaped = c_escape(data, ZERO_TERMINATED); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_mime_data(part%d, \"%s\", CURL_ZERO_TERMINATED);", | |
| mimeno, escaped); | |
| } | |
| break; | |
| case TOOLMIME_FILE: | |
| case TOOLMIME_FILEDATA: | |
| escaped = c_escape(part->data, ZERO_TERMINATED); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_mime_filedata(part%d, \"%s\");", mimeno, escaped); | |
| if(part->kind == TOOLMIME_FILEDATA && !filename) { | |
| CODE1("curl_mime_filename(part%d, NULL);", mimeno); | |
| } | |
| break; | |
| case TOOLMIME_STDIN: | |
| if(!filename) | |
| filename = "-"; | |
| FALLTHROUGH(); | |
| case TOOLMIME_STDINDATA: | |
| /* Can only be reading stdin in the current context. */ | |
| CODE1("curl_mime_data_cb(part%d, -1, (curl_read_callback) fread, \\", | |
| mimeno); | |
| CODE0(" (curl_seek_callback) fseek, NULL, stdin);"); | |
| break; | |
| default: | |
| /* Other cases not possible in this context. */ | |
| break; | |
| } | |
| if(!ret && part->encoder) { | |
| Curl_safefree(escaped); | |
| escaped = c_escape(part->encoder, ZERO_TERMINATED); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_mime_encoder(part%d, \"%s\");", mimeno, escaped); | |
| } | |
| if(!ret && filename) { | |
| Curl_safefree(escaped); | |
| escaped = c_escape(filename, ZERO_TERMINATED); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_mime_filename(part%d, \"%s\");", mimeno, escaped); | |
| } | |
| if(!ret && part->name) { | |
| Curl_safefree(escaped); | |
| escaped = c_escape(part->name, ZERO_TERMINATED); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_mime_name(part%d, \"%s\");", mimeno, escaped); | |
| } | |
| if(!ret && part->type) { | |
| Curl_safefree(escaped); | |
| escaped = c_escape(part->type, ZERO_TERMINATED); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_mime_type(part%d, \"%s\");", mimeno, escaped); | |
| } | |
| if(!ret && part->headers) { | |
| int slistno; | |
| ret = libcurl_generate_slist(part->headers, &slistno); | |
| if(!ret) { | |
| CODE2("curl_mime_headers(part%d, slist%d, 1);", mimeno, slistno); | |
| CODE1("slist%d = NULL;", slistno); /* Prevent CLEANing. */ | |
| } | |
| } | |
| nomem: | |
| Curl_safefree(escaped); | |
| return ret; | |
| } | |
| /* Wrapper to generate source code for a mime structure. */ | |
| static CURLcode libcurl_generate_mime(CURL *curl, | |
| struct GlobalConfig *config, | |
| struct tool_mime *toolmime, | |
| int *mimeno) | |
| { | |
| CURLcode ret = CURLE_OK; | |
| /* May need several mime variables, so invent name. */ | |
| *mimeno = ++easysrc_mime_count; | |
| DECL1("curl_mime *mime%d;", *mimeno); | |
| DATA1("mime%d = NULL;", *mimeno); | |
| CODE1("mime%d = curl_mime_init(hnd);", *mimeno); | |
| CLEAN1("curl_mime_free(mime%d);", *mimeno); | |
| CLEAN1("mime%d = NULL;", *mimeno); | |
| if(toolmime->subparts) { | |
| DECL1("curl_mimepart *part%d;", *mimeno); | |
| ret = libcurl_generate_mime_part(curl, config, | |
| toolmime->subparts, *mimeno); | |
| } | |
| nomem: | |
| return ret; | |
| } | |
| /* setopt wrapper for CURLOPT_MIMEPOST */ | |
| CURLcode tool_setopt_mimepost(CURL *curl, struct GlobalConfig *config, | |
| const char *name, CURLoption tag, | |
| curl_mime *mimepost) | |
| { | |
| CURLcode ret = curl_easy_setopt(curl, tag, mimepost); | |
| int mimeno = 0; | |
| if(!ret && config->libcurl) { | |
| ret = libcurl_generate_mime(curl, config, | |
| config->current->mimeroot, &mimeno); | |
| if(!ret) | |
| CODE2("curl_easy_setopt(hnd, %s, mime%d);", name, mimeno); | |
| } | |
| nomem: | |
| return ret; | |
| } | |
| /* setopt wrapper for curl_slist options */ | |
| CURLcode tool_setopt_slist(CURL *curl, struct GlobalConfig *config, | |
| const char *name, CURLoption tag, | |
| struct curl_slist *list) | |
| { | |
| CURLcode ret = CURLE_OK; | |
| ret = curl_easy_setopt(curl, tag, list); | |
| if(config->libcurl && list && !ret) { | |
| int i; | |
| ret = libcurl_generate_slist(list, &i); | |
| if(!ret) | |
| CODE2("curl_easy_setopt(hnd, %s, slist%d);", name, i); | |
| } | |
| nomem: | |
| return ret; | |
| } | |
| /* generic setopt wrapper for all other options. | |
| * Some type information is encoded in the tag value. */ | |
| CURLcode tool_setopt(CURL *curl, bool str, struct GlobalConfig *global, | |
| struct OperationConfig *config, | |
| const char *name, CURLoption tag, ...) | |
| { | |
| va_list arg; | |
| char buf[256]; | |
| const char *value = NULL; | |
| bool remark = FALSE; | |
| bool skip = FALSE; | |
| bool escape = FALSE; | |
| char *escaped = NULL; | |
| CURLcode ret = CURLE_OK; | |
| va_start(arg, tag); | |
| if(tag < CURLOPTTYPE_OBJECTPOINT) { | |
| /* Value is expected to be a long */ | |
| long lval = va_arg(arg, long); | |
| long defval = 0L; | |
| const struct NameValue *nv = NULL; | |
| for(nv = setopt_nv_CURLNONZERODEFAULTS; nv->name; nv++) { | |
| if(!strcmp(name, nv->name)) { | |
| defval = nv->value; | |
| break; /* found it */ | |
| } | |
| } | |
| msnprintf(buf, sizeof(buf), "%ldL", lval); | |
| value = buf; | |
| ret = curl_easy_setopt(curl, tag, lval); | |
| if(lval == defval) | |
| skip = TRUE; | |
| } | |
| else if(tag < CURLOPTTYPE_OFF_T) { | |
| /* Value is some sort of object pointer */ | |
| void *pval = va_arg(arg, void *); | |
| /* function pointers are never printable */ | |
| if(tag >= CURLOPTTYPE_FUNCTIONPOINT) { | |
| if(pval) { | |
| value = "function pointer"; | |
| remark = TRUE; | |
| } | |
| else | |
| skip = TRUE; | |
| } | |
| else if(pval && str) { | |
| value = (char *)pval; | |
| escape = TRUE; | |
| } | |
| else if(pval) { | |
| value = "object pointer"; | |
| remark = TRUE; | |
| } | |
| else | |
| skip = TRUE; | |
| ret = curl_easy_setopt(curl, tag, pval); | |
| } | |
| else if(tag < CURLOPTTYPE_BLOB) { | |
| /* Value is expected to be curl_off_t */ | |
| curl_off_t oval = va_arg(arg, curl_off_t); | |
| msnprintf(buf, sizeof(buf), | |
| "(curl_off_t)%" CURL_FORMAT_CURL_OFF_T, oval); | |
| value = buf; | |
| ret = curl_easy_setopt(curl, tag, oval); | |
| if(!oval) | |
| skip = TRUE; | |
| } | |
| else { | |
| /* Value is a blob */ | |
| void *pblob = va_arg(arg, void *); | |
| /* blobs are never printable */ | |
| if(pblob) { | |
| value = "blob pointer"; | |
| remark = TRUE; | |
| } | |
| else | |
| skip = TRUE; | |
| ret = curl_easy_setopt(curl, tag, pblob); | |
| } | |
| va_end(arg); | |
| if(global->libcurl && !skip && !ret) { | |
| /* we only use this for real if --libcurl was used */ | |
| if(remark) | |
| REM3("%s was set to a%s %s", name, (*value == 'o' ? "n" : ""), value); | |
| else { | |
| if(escape) { | |
| curl_off_t len = ZERO_TERMINATED; | |
| if(tag == CURLOPT_POSTFIELDS) | |
| len = curlx_dyn_len(&config->postdata); | |
| escaped = c_escape(value, len); | |
| NULL_CHECK(escaped); | |
| CODE2("curl_easy_setopt(hnd, %s, \"%s\");", name, escaped); | |
| } | |
| else | |
| CODE2("curl_easy_setopt(hnd, %s, %s);", name, value); | |
| } | |
| } | |
| nomem: | |
| Curl_safefree(escaped); | |
| return ret; | |
| } | |
| #else /* CURL_DISABLE_LIBCURL_OPTION */ | |
| #endif /* CURL_DISABLE_LIBCURL_OPTION */ |