moved to the perl module
diff --git a/perl/Curl_easy/examples/basicfirst.pl b/perl/Curl_easy/examples/basicfirst.pl
deleted file mode 100644
index a04deb5..0000000
--- a/perl/Curl_easy/examples/basicfirst.pl
+++ /dev/null
@@ -1,48 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-use strict;
-use Curl::easy;
-
-my $url = "http://curl.haxx.se/dev/";
-
-print "Testing curl version ",&Curl::easy::version(),"\n";
-
-# Init the curl session
-my $curl= Curl::easy::init();
-if(!$curl) {
- die "curl init failed!\n";
-}
-
-# Follow location headers
- Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-
-# Add some additional headers to the http-request:
-my @myheaders;
-$myheaders[0] = "I-am-a-silly-programmer: yes indeed you are";
-$myheaders[1] = "User-Agent: Perl interface for libcURL";
- Curl::easy::setopt($curl, Curl::easy::CURLOPT_HTTPHEADER, \@myheaders);
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-sub body_callback {
- my ($chunk,$handle)=@_;
- push @$handle, $chunk;
- return length($chunk); # OK
-}
- Curl::easy::setopt($curl, CURLOPT_WRITEFUNCTION, \&body_callback);
-
-my @body;
- Curl::easy::setopt($curl, CURLOPT_FILE, \@body);
-
-if (Curl::easy::perform($curl) != 0) {
- print "Failed :$errbuf\n";
-};
-
-# Cleanup
- Curl::easy::cleanup($curl);
-
-print @body;
diff --git a/perl/Curl_easy/t/00constants.t b/perl/Curl_easy/t/00constants.t
deleted file mode 100644
index 2ef1545..0000000
--- a/perl/Curl_easy/t/00constants.t
+++ /dev/null
@@ -1,38 +0,0 @@
-
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make test'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-# (It may become useful if the test is moved to ./t subdirectory.)
-use Benchmark;
-use strict;
-
-BEGIN { $| = 1; print "1..2\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################## End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-print STDERR "Testing curl version ",&Curl::easy::version(),"\n";
-
-if (CURLOPT_URL != 10000+2) {
- print "not ";
-}
-
-print "ok ".++$count;
-
-exit;
diff --git a/perl/Curl_easy/t/01basic.t b/perl/Curl_easy/t/01basic.t
deleted file mode 100644
index 79a6e8a..0000000
--- a/perl/Curl_easy/t/01basic.t
+++ /dev/null
@@ -1,93 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..6\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "http://localhost/cgi-bin/printenv";
-my $url;
-if (defined ($ENV{CURL_TEST_URL})) {
- $url=$ENV{CURL_TEST_URL};
-} else {
-$url = "";
-print "Please enter an URL to fetch [$defurl]: ";
-$url = <STDIN>;
-if ($url =~ /^\s*\n/) {
- $url = $defurl;
-}
-}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-# Add some additional headers to the http-request:
-my @myheaders;
-$myheaders[0] = "Server: www";
-$myheaders[1] = "User-Agent: Perl interface for libcURL";
-Curl::easy::setopt($curl, CURLOPT_HTTPHEADER, \@myheaders);
-
-my $bytes;
-my $realurl;
-my $httpcode;
-
-# Go get it
-my $retcode=Curl::easy::perform($curl);
-if ($retcode == 0) {
- Curl::easy::getinfo($curl, CURLINFO_SIZE_DOWNLOAD, $bytes);
- print STDERR "$bytes bytes read ";
- Curl::easy::getinfo($curl, CURLINFO_EFFECTIVE_URL, $realurl);
- Curl::easy::getinfo($curl, CURLINFO_HTTP_CODE, $httpcode);
- print STDERR "effective fetched url (http code: $httpcode) was: $url ";
-} else {
- # We can acces the error message in $errbuf here
- print STDERR "$retcode / '$errbuf'\n";
- print "not ";
-}
-print "ok ".++$count."\n";
-
-exit;
diff --git a/perl/Curl_easy/t/02header-callback.t b/perl/Curl_easy/t/02header-callback.t
deleted file mode 100644
index 94a745c..0000000
--- a/perl/Curl_easy/t/02header-callback.t
+++ /dev/null
@@ -1,89 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..9\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "http://localhost/cgi-bin/printenv";
-my $url;
-if (defined ($ENV{CURL_TEST_URL})) {
- $url=$ENV{CURL_TEST_URL};
-} else {
-$url = "";
-print "Please enter an URL to fetch [$defurl]: ";
-$url = <STDIN>;
-if ($url =~ /^\s*\n/) {
- $url = $defurl;
-}
-}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-# The header callback will only be called if your libcurl has the
-# CURLOPT_HEADERFUNCTION supported, otherwise your headers
-# go to CURLOPT_WRITEFUNCTION instead...
-#
-
-my $header_called=0;
-sub header_callback { print STDERR "header callback called\n"; $header_called=1; return length($_[0])};
-
-# test for sub reference and head callback
-Curl::easy::setopt($curl, CURLOPT_HEADERFUNCTION, \&header_callback);
-print "ok ".++$count."\n";
-
-if (Curl::easy::perform($curl) != 0) {
- print "not ";
-};
-print "ok ".++$count."\n";
-
-print STDERR "next test will fail on libcurl < 7.7.2\n";
-print "not " if (!$header_called); # ok if you have a libcurl <7.7.2
-print "ok ".++$count."\n";
-
-exit;
diff --git a/perl/Curl_easy/t/03body-callback.t b/perl/Curl_easy/t/03body-callback.t
deleted file mode 100644
index 94786f5..0000000
--- a/perl/Curl_easy/t/03body-callback.t
+++ /dev/null
@@ -1,105 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..9\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "http://localhost/cgi-bin/printenv";
-my $url;
-if (defined ($ENV{CURL_TEST_URL})) {
- $url=$ENV{CURL_TEST_URL};
-} else {
-$url = "";
-print "Please enter an URL to fetch [$defurl]: ";
-$url = <STDIN>;
-if ($url =~ /^\s*\n/) {
- $url = $defurl;
-}
-}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-
-# The header callback will only be called if your libcurl has the
-# CURLOPT_HEADERFUNCTION supported, otherwise your headers
-# go to CURLOPT_WRITEFUNCTION instead...
-#
-
-my $header_called=0;
-sub header_callback { print STDERR "header callback called\n"; $header_called=1; return length($_[0])};
-
-# test for sub reference and head callback
-Curl::easy::setopt($curl, CURLOPT_HEADERFUNCTION, \&header_callback);
-
-my $body_called=0;
-sub body_callback {
- my ($chunk,$handle)=@_;
- print STDERR "body callback called with ",length($chunk)," bytes\n";
- print STDERR "data=$chunk\n";
- $body_called++;
- return length($chunk); # OK
-}
-
-
-# test for ref to sub and body callback
-my $body_ref=\&body_callback;
-Curl::easy::setopt($curl, CURLOPT_WRITEFUNCTION, $body_ref);
-
-if (Curl::easy::perform($curl) != 0) {
- print "not ";
-};
-print "ok ".++$count."\n";
-
-
-print STDERR "next test will fail on libcurl < 7.7.2\n";
-print STDERR "not " if (!$header_called); # ok if you have a libcurl <7.7.2
-print "ok ".++$count."\n";
-
-print "not " if (!$body_called);
-print "ok ".++$count."\n";
diff --git a/perl/Curl_easy/t/04abort-test.t b/perl/Curl_easy/t/04abort-test.t
deleted file mode 100644
index c3d71bb..0000000
--- a/perl/Curl_easy/t/04abort-test.t
+++ /dev/null
@@ -1,87 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..8\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "http://localhost/cgi-bin/printenv";
-my $url;
-if (defined ($ENV{CURL_TEST_URL})) {
- $url=$ENV{CURL_TEST_URL};
-} else {
-$url = "";
-print "Please enter an URL to fetch [$defurl]: ";
-$url = <STDIN>;
-if ($url =~ /^\s*\n/) {
- $url = $defurl;
-}
-}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-
-my $body_abort_called=0;
-sub body_abort_callback {
- my ($chunk,$sv)=@_;
- print STDERR "body abort callback called with ",length($chunk)," bytes\n";
- $body_abort_called++;
- return -1; # signal a failure
-}
-
-# test we can abort a request mid-way
-my $body_abort_ref=\&body_abort_callback;
-Curl::easy::setopt($curl, CURLOPT_WRITEFUNCTION, $body_abort_ref);
-
-if (Curl::easy::perform($curl) == 0) { # reverse test - this should have failed
- print "not ";
-};
-print "ok ".++$count."\n";
-
-print "not " if (!$body_abort_called); # should have been called
-print "ok ".++$count."\n";
diff --git a/perl/Curl_easy/t/05progress.t b/perl/Curl_easy/t/05progress.t
deleted file mode 100644
index ffcdb80..0000000
--- a/perl/Curl_easy/t/05progress.t
+++ /dev/null
@@ -1,99 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..9\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "http://localhost/cgi-bin/printenv";
-my $url;
-if (defined ($ENV{CURL_TEST_URL})) {
- $url=$ENV{CURL_TEST_URL};
-} else {
-$url = "";
-print "Please enter an URL to fetch [$defurl]: ";
-$url = <STDIN>;
-if ($url =~ /^\s*\n/) {
- $url = $defurl;
-}
-}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 0);
-print "ok ".++$count."\n";
-
-# inline progress function
-# tests for inline subs and progress callback
-# - progress callback must return 'true' on each call.
-
-my $progress_called=0;
-sub prog_callb
-{
- my ($clientp,$dltotal,$dlnow,$ultotal,$ulnow)=@_;
- print STDERR "\nperl progress_callback has been called!\n";
- print STDERR "clientp: $clientp, dltotal: $dltotal, dlnow: $dlnow, ultotal: $ultotal, ";
- print STDERR "ulnow: $ulnow\n";
- $progress_called++;
- return 0;
-}
-
-Curl::easy::setopt($curl, CURLOPT_PROGRESSFUNCTION, \&prog_callb);
-
-# Turn progress meter back on - this doesn't work in older libcurls - once its off, its off.
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 0);
-
-if (Curl::easy::perform($curl) != 0) {
- print "not ";
-};
-print "ok ".++$count."\n";
-
-print "not " if (!$progress_called);
-print "ok ".++$count."\n";
-
diff --git a/perl/Curl_easy/t/06http-post.t b/perl/Curl_easy/t/06http-post.t
deleted file mode 100644
index c38cab9..0000000
--- a/perl/Curl_easy/t/06http-post.t
+++ /dev/null
@@ -1,99 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..7\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "http://localhost/cgi-bin/printenv";
-my $url;
-if (defined ($ENV{CURL_TEST_URL})) {
- $url=$ENV{CURL_TEST_URL};
-} else {
-$url = "";
-print "Please enter an URL to fetch [$defurl]: ";
-$url = <STDIN>;
-if ($url =~ /^\s*\n/) {
- $url = $defurl;
-}
-}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-
-my $read_max=1000;
-
-sub read_callb
-{
- my ($maxlen,$sv)=@_;
- print STDERR "\nperl read_callback has been called!\n";
- print STDERR "max data size: $maxlen - need $read_max bytes\n";
- if ($read_max > 0) {
- my $len=int($read_max/3)+1;
- my $data = chr(ord('A')+rand(26))x$len;
- print STDERR "generated max/3=", int($read_max/3)+1, " characters to be uploaded - $data.\n";
- $read_max=$read_max-length($data);
- return $data;
- } else {
- return "";
- }
-}
-
-#
-# test post/read callback functions - requires a url which accepts posts, or it fails!
-#
-
-Curl::easy::setopt($curl,CURLOPT_READFUNCTION,\&read_callb);
-Curl::easy::setopt($curl,CURLOPT_INFILESIZE,$read_max );
-Curl::easy::setopt($curl,CURLOPT_UPLOAD,1 );
-Curl::easy::setopt($curl,CURLOPT_CUSTOMREQUEST,"POST" );
-
-if (Curl::easy::perform($curl) != 0) {
- print "not ";
-};
-print "ok ".++$count."\n";
diff --git a/perl/Curl_easy/t/07ftp-upload.t b/perl/Curl_easy/t/07ftp-upload.t
deleted file mode 100644
index c23a180..0000000
--- a/perl/Curl_easy/t/07ftp-upload.t
+++ /dev/null
@@ -1,129 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..10\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# Read URL to get
-my $defurl = "ftp://user\@localhost//tmp/blah";
-my $url;
-if (defined ($ENV{CURL_TEST_URL_FTP})) {
- $url=$ENV{CURL_TEST_URL_FTP};
-};# else {
-#$url = "";
-#print "Please enter an URL to fetch [$defurl]: ";
-#$url = <STDIN>;
-#if ($url =~ /^\s*\n/) {
- $url = $defurl;
-#}
-#}
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 1);
-Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
-print "ok ".++$count."\n";
-
-sub passwd_callb
-{
- my ($clientp,$prompt,$buflen)=@_;
- print STDERR "\nperl passwd_callback has been called!\n";
- print STDERR "clientp: $clientp, prompt: $prompt, buflen: $buflen\n";
- print STDERR "\nEnter max $buflen characters for $prompt ";
- my $data = <STDIN>;
- chomp($data);
- return (0,$data);
-}
-
-# Now do an ftp upload:
-
-
-Curl::easy::setopt($curl, Curl::easy::CURLOPT_UPLOAD, 1);
-
-
-my $read_max=1000;
-Curl::easy::setopt($curl,CURLOPT_INFILESIZE,$read_max );
-print "ok ".++$count."\n";
-
-sub read_callb
-{
- my ($maxlen,$sv)=@_;
- print STDERR "\nperl read_callback has been called!\n";
- print STDERR "max data size: $maxlen - $read_max bytes needed\n";
-
- if ($read_max > 0) {
- my $len=int($read_max/3)+1;
- my $data = chr(ord('A')+rand(26))x$len;
- print STDERR "generated max/3=", int($read_max/3)+1, " characters to be uploaded - $data.\n";
- $read_max=$read_max-length($data);
- return $data;
- } else {
- return "";
- }
-}
-
-# Use perl read callback to read data to be uploaded
-Curl::easy::setopt($curl, Curl::easy::CURLOPT_READFUNCTION, \&read_callb);
-
-# Use perl passwd callback to read password for login to ftp server
-Curl::easy::setopt($curl, Curl::easy::CURLOPT_PASSWDFUNCTION, \&passwd_callb);
-
-print "ok ".++$count."\n";
-my $bytes;
-
-# Go get it
-if (Curl::easy::perform($curl) == 0) {
- Curl::easy::getinfo($curl, Curl::easy::CURLINFO_SIZE_UPLOAD, $bytes);
- print STDERR "$bytes bytes transferred\n";
-} else {
- # We can acces the error message in $errbuf here
- print STDERR "'$errbuf'\n";
- print "not ";
-}
-print "ok ".++$count."\n";
-
-# Cleanup
-Curl::easy::cleanup($curl);
-print "ok ".++$count."\n";
diff --git a/perl/Curl_easy/t/08ssl.t b/perl/Curl_easy/t/08ssl.t
deleted file mode 100644
index 0da9a55..0000000
--- a/perl/Curl_easy/t/08ssl.t
+++ /dev/null
@@ -1,98 +0,0 @@
-# Test script for Perl extension Curl::easy.
-# Check out the file README for more info.
-
-# Before `make install' is performed this script should be runnable with
-# `make t/thisfile.t'. After `make install' it should work as `perl thisfile.t'
-
-######################### We start with some black magic to print on failure.
-
-# Change 1..1 below to 1..last_test_to_print .
-use strict;
-
-BEGIN { $| = 1; print "1..20\n"; }
-END {print "not ok 1\n" unless $::loaded;}
-use Curl::easy;
-
-$::loaded = 1;
-print "ok 1\n";
-
-######################### End of black magic.
-
-# Insert your test code below (better if it prints "ok 13"
-# (correspondingly "not ok 13") depending on the success of chunk 13
-# of the test code):
-
-my $count=1;
-
-# list of tests
-# site-url, verifypeer(0,1), verifyhost(0,2), result(0=ok, 1=fail)
-my $url_list=[
- [ 'https://216.168.252.86/', 0, 0, 0 ], # www.awayweb.com
- [ 'https://216.168.252.86/', 0, 2, 1 ], # www.awayweb.com
- [ 'https://www.verisign.com/', 0, 0, 0 ],
- [ 'https://www.verisign.com/', 0, 2, 0 ],
- [ 'https://www.verisign.com/', 1, 2, 0 ], # these fail on openssl0.9.5 - unknown sig
- [ 'https://www.verisign.com/', 1, 2, 0 ], # these fail on openssl0.9.5 - unknown sig
- [ 'https://lc2.law13.hotmail.passport.com/', 0, 0, 0 ],
- [ 'https://lc2.law13.hotmail.passport.com/', 0, 2, 0 ],
- [ 'https://lc2.law13.hotmail.passport.com/', 1, 2, 0 ], # fail on 0.9.5
- [ 'https://lc2.law13.hotmail.passport.com/', 1, 2, 0 ], # fail on 0.9.5
- [ 'https://www.modssl.org/', 0, 0, 0 ],
- [ 'https://www.modssl.org/', 0, 2, 0 ],
- [ 'https://www.modssl.org/', 1, 0, 1 ],
- [ 'https://www.modssl.org/', 1, 2, 1 ],
-];
-
-# Init the curl session
-my $curl = Curl::easy::init();
-if ($curl == 0) {
- print "not ";
-}
-print "ok ".++$count."\n";
-
-
-Curl::easy::setopt($curl, CURLOPT_NOPROGRESS, 1);
-Curl::easy::setopt($curl, CURLOPT_MUTE, 0);
-#Curl::easy::setopt($curl, CURLOPT_FOLLOWLOCATION, 1);
-Curl::easy::setopt($curl, CURLOPT_TIMEOUT, 30);
-
-my @myheaders;
-$myheaders[1] = "User-Agent: Verifying SSL functions in perl interface for libcURL";
-Curl::easy::setopt($curl, CURLOPT_HTTPHEADER, \@myheaders);
-
-open HEAD, ">head.out";
-Curl::easy::setopt($curl, CURLOPT_WRITEHEADER, *HEAD);
-print "ok ".++$count."\n";
-
-open BODY, ">body.out";
-Curl::easy::setopt($curl, CURLOPT_FILE,*BODY);
-print "ok ".++$count."\n";
-
-my $errbuf;
-Curl::easy::setopt($curl, CURLOPT_ERRORBUFFER, "errbuf");
-print "ok ".++$count."\n";
-
-Curl::easy::setopt($curl, CURLOPT_FORBID_REUSE, 1);
-
-
-print "ok ".++$count."\n";
-Curl::easy::setopt($curl, CURLOPT_CAINFO,"ca-bundle.crt");
-
-foreach my $test_list (@$url_list) {
- my ($url,$verifypeer,$verifyhost,$result)=@{$test_list};
- print STDERR "testing $url verify=$verifypeer at level $verifyhost expect ".($result?"fail":"pass")."\n";
-
- Curl::easy::setopt($curl, CURLOPT_SSL_VERIFYPEER,$verifypeer); # do verify
- Curl::easy::setopt($curl, CURLOPT_SSL_VERIFYHOST,$verifyhost); # check name
- my $retcode;
-
- Curl::easy::setopt($curl, CURLOPT_URL, $url);
-
- $retcode=Curl::easy::perform($curl);
- if ( ($retcode != 0) != $result) {
- print STDERR "error $retcode $errbuf\n";
- print "not ";
- };
- print "ok ".++$count."\n";
-
-}
diff --git a/perl/Curl_easy/t/Makefile.am b/perl/Curl_easy/t/Makefile.am
deleted file mode 100644
index 99466ba..0000000
--- a/perl/Curl_easy/t/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-EXTRA_DIST = 00constants.t 01basic.t 02header-callback.t 03body-callback.t\
-04abort-test.t 05progress.t 06http-post.t 07ftp-upload.t 08ssl.t
