| Daniel (27 Dec 2002) |
| - Philippe Raoult reported a bug with HTTPS connections which I evidently |
| added in my 19 dec fix. I corrected it. |
| |
| Daniel (20 Dec) |
| - Idea from the Debian latest patch: use AM_MAINTAINER_MODE in the configure |
| script to make the default makefile less confusing "to the casual |
| installer". |
| |
| Version 7.10.3-pre3 (20 Dec) |
| |
| Daniel (19 Dec) |
| - Matthew Blain patched the Curl_base64_decode() function. |
| |
| - Evan Jordan reported in bug report #653022 that the SSL_read() usage was |
| wrong, and it certainly was. It could lead to curl using too much CPU due to |
| a stupid loop. |
| |
| Daniel (18 Dec) |
| - As suggested by Margus Freudenthal, CURLE_HTTP_NOT_FOUND was renamed to |
| CURLE_HTTP_RETURNED_ERROR since it is returned on any >= 400 code when |
| CURLOPT_FAILONERROR is set. |
| |
| Daniel (17 Dec) |
| - Bug reported #651464, reported by Christopher Palmer, provided an example |
| source code using the multi interface that hang when trying to connect to a |
| proxy on a localhost port where no proxy was listening. This bug was not |
| repeatable on libcurls that were IPv6-enabled. |
| |
| Daniel (16 Dec) |
| - Christopher Palmer also noticed what Vojtech Janota already was |
| experiencing: The attempted name resolve fix for glibc 2.2.93 caused libcurl |
| to crash when used on some older glibc versions. The problem is of course |
| the silliness of the 2.2.93. I committed a fix that hopefully should make |
| the binary run fine on either one of the versions, even though the solution |
| is not as nice as I'd like it to be. |
| |
| Daniel (13 Dec) |
| - Bug report #651460 by Christopher R. Palmer showed that when using libcurl |
| to for example go over a proxy on localhost, it would attempt to connect |
| through the proxy TWICE. |
| |
| I added test case 503 with which I managed to repeat this problem and I |
| fixed the code to not re-attempt any connects (which also made it a nicer |
| fix for the #650941 bug mentioned below). |
| |
| The sws server was extended to deal with CONNECT in order to make test |
| case 503 do good. |
| |
| - Evan Jordan posted bug report #650989 about a memory leak in the public key |
| retrieving code. He provided a suggested fix and I merely applied it! |
| |
| - Bug report #650941, posted by Christopher R. Palmer identified a problem |
| with the multi interface and getting file:// URLs. This was now fixed and |
| test case 502 was added to verify this. |
| |
| Daniel (12 Dec) |
| - Test case 500 and 501 are the first ever libcurl test cases that run. |
| |
| - Made "configure --enable-debug" cut off all -O* options to the compiler |
| |
| - Finally fixed the test suite's ftp server so that test case 402 doesn't |
| cause the following test case to fail anymore! |
| |
| Daniel (11 Dec) |
| - CURL_MAX_WRITE_SIZE is now decreased to 16KB since it makes the Windows |
| version perform uploads much faster!!! RBramante did lots of research on |
| this topic. |
| |
| - Fixed the #include in curl/curl.h to include the other files outside the |
| extern "C" scope. |
| |
| Daniel (10 Dec) |
| - Moved around and added more logic: |
| |
| First, POST data is never sent as part of the request headers in the http.c |
| code. It is always sent the "normal" read callback then send() way. This now |
| enables a plain HTTP POST to be sent chunked if we want to. This also |
| reduces the risk of having very big POSTs causing problems. |
| |
| Further, sending off the initial HTTP request is not done using a loop |
| anymore. If it wasn't all sent off in the first send(), the rest of the |
| request is sent off in the normal transfer select() loop. This makes several |
| things possible, but mainly it makes libcurl block less when used from the |
| multi interface and it also reduces the risk of problems with issuing very |
| large requests. |
| |
| Daniel (9 Dec) |
| - Moved the read callback pointer and data within the structs to a more |
| suitable place. This in preparation for a better HTTP-request sending code |
| without (a silly) loop. |
| |
| - The Dodds fix seems not to work. |
| |
| - Vojtech Janota tests proved that the resolve fix from oct 21st is not good |
| enough since obviously older glibcs might return EAGAIN without this meaning |
| that the buffer was too small. |
| |
| - [the other day] Made libcurl loop on recv() and send() now until done, and |
| then get back to select(). Previously it went back to select() more often |
| which really was a slight overhead. This was due to the reported performance |
| problems on HTTP PUT on Windows. I couldn't see any notable difference on |
| Linux... |
| |
| Version 7.10.3-pre2 (4 Dec 2002) |
| |
| Daniel (4 Dec 2002) |
| - Lots of work with Malcolm Dodds made me add a temporary code fix that now |
| shortens the timeout waiting for the 226 or 250 line after a completed |
| FTP transfer. |
| |
| If no data is received within 60 seconds, this is taken as a sign of a dead |
| control connection and we bail out. |
| |
| Daniel (3 Dec 2002) |
| - Ralph's bug report #644841 identified a problem in which curl returned a |
| timeout error code when in fact the problem was not a timeout. The proper |
| error should now be propagated better when they're detected in the FTP |
| response reading function. |
| |
| - Updated the Borland Makefiles. |
| |
| Daniel (2 Dec 2002) |
| - Nicolas Berloquin provided a patch that introduced --create-dirs to the |
| command line tool. When used in combination with -o, it lets curl create |
| [non-existing] directories used in -o, suitably used with #-combinations |
| such as: |
| |
| curl "www.images.com/{flowers,cities,parks,mountains}/pic_[1-100].jpg \ |
| -o "dir_#1/pic#2.jpg" --create-dirs |
| |
| Version 7.10.3-pre1 |
| |
| Daniel (28 Nov 2002) |
| - I visited Lars Nordgren and had a go with his problem, which lead me to |
| implement this fix. If libcurl detects the added custom header |
| "Transfer-Encoding: chunked", it will now enable a chunked transfer. |
| |
| Also, chunked transfer didn't quite work before but seems to do so now. |
| |
| - Kjetil Jacobsen pointed out that ./configure --disable-ipv6 --without-zlib |
| didn't work on any platform... |
| |
| Daniel (26 Nov 2002) |
| - Fixed a bad addrinfo free in the hostip.c code, hardly exposed anywhere |
| |
| - Dan Becker found and fixed a minor memory leak on persistent connnections |
| using CURLOPT_USERPWD. |
| |
| Daniel (22 Nov 2002) |
| - Based on Ralph Mitchell's excellent analysis I found a bug in the test suite |
| web server (sws) which now lets test case 306 run fine even in combination |
| with the other test cases. |
| |
| - Juan Ignacio Hervás found a crash in the verbose connect message that is |
| used on persistent connections. This bug was added in 7.10.2 due to the |
| rearranged name resolve code. |
| |
| Daniel (20 Nov 2002) |
| - Kjetil Jacobsen provided a patch that introduces: |
| |
| CURLOPT_PRIVATE stores a private pointer in the curl handle. |
| |
| CURLINFO_PRIVATE retrieves the private pointer from the curl handle. |
| |
| - Karol Pietrzak pointed out how curl-config --cflags didn't output a good |
| include dir so I've removed that for now. |
| |
| Version 7.10.2 (18 Nov 2002) |
| |
| Daniel (11 Nov 2002) |
| - Dave Halbakken added curl_version_info to lib/libcurl.def to make libcurl |
| properly build with MSVC on Windows. |
| |
| Daniel (8 Nov 2002) |
| - Doing HTTP PUT without a specified file size now makes libcurl use |
| Transfer-Encoding: chunked. |
| |
| Daniel (7 Nov 2002) |
| - Bug report #634625 identified how curl returned timeout immediately when |
| CURLOPT_CONNECTTIMEOUT was used and provided a fix. |
| |
| Version 7.10.2-pre4 (6 Nov 2002) |
| |
| Daniel (5 Nov 2002) |
| - Lehel Bernadt found out and fixed. libcurl sent error message to the debug |
| output when it stored the error message. |
| |
| - Avery Fay found some problems with the DNS cache (when the cache time was |
| set to 0 we got a memory leak, but when the leak was fixed he got a crash |
| when he used the CURLOPT_INTERFACE with that) that had me do some real |
| restructuring so that we now have a reference counter in the dns cache |
| entries to prevent an entry to get flushed while still actually in use. |
| |
| I also detected that we previously didn't update the time stamp when we |
| extracted an entry from the cache so that must've been a reason for some |
| very weird dns cache bugs. |
| |
| Version 7.10.2-pre3 |
| |
| Daniel (31 Oct 2002) |
| - Downgraded automake to 1.6.3 in an attempt to fix cygwin problems. (It |
| turned out this didn't help though.) |
| |
| - Disable the DNS cache (by setting the timeout to 0) made libcurl leak |
| memory. Avery Fay brought the example code that proved this. |
| |
| Version 7.10.2-pre2 |
| |
| Daniel (28 Oct 2002) |
| - Upgraded to autoconf 2.54 and automake 1.7 on the release-build host. |
| |
| - Kevin Roth made the command line tool check for a CURL_CA_BUNDLE environment |
| variable (if --cacert isn't used) and if not set, the Windows version will |
| check for a file named "curl-ca-bundle.crt" in the current directory or the |
| directory where curl is located. That file is then used as CA root cert |
| bundle. |
| |
| - Avery Fay pointed out that curl's configure scrip didn't get right if you |
| used autoconf newer than 2.52. This was due to some badly quoted code. |
| |
| Version 7.10.2-pre1 |
| |
| Daniel (23 Oct 2002) |
| - Emiliano Ida confirmed that we now build properly with the Borland C++ |
| compiler too. We needed yet another fix for the ISO cpp check in the curl.h |
| header file. |
| |
| - Yet another fix was needed to get the HTTP download without headers to work. |
| This time it was needed if the first "believed header" was read all in the |
| first read. Test 306 has not run properly since the 11th october fix. |
| |
| Daniel (21 Oct 2002) |
| - Zvi Har'El pointed out a problem with curl's name resolving on Redhat 8 |
| machines (running IPv6 disabled). Mats Lidell let me use an account on his |
| machine and I could verify that gethostbyname_r() has been changed to return |
| EAGAIN instead of ERANGE when the given buffer size is too small. This is |
| glibc 2.2.93. |
| |
| - Albert Chin helped me get the -no-undefined option corrected in |
| lib/Makefile.am since Cygwin builds want it there while Solaris builds don't |
| want it present. Kevin Roth helped me try it out on cygwin. |
| |
| - Nikita Schmidt provided a bug fix for a FOLLOWLOCATION bug introduced when |
| the ../ support got in (7.10.1). |
| |
| Daniel (18 Oct 2002) |
| - Fabrizio Ammollo pointed out a remaining problem with FOLLOWLOCATION in |
| the multi interface. |
| |
| Daniel (17 Oct 2002) |
| - Richard Cooper's experimenting proved that -j (CURLOPT_COOKIESESSION) didn't |
| work quite as supposed. You needed to set it *before* you use |
| CURLOPT_COOKIEFILE, and we dont' want that kind of dependencies. |
| |
| Daniel (15 Oct 2002) |
| - Andrés García provided corrections for erratas in four libcurl man pages. |
| |
| Daniel (13 Oct 2002) |
| - Starting now, we generate and include PDF versions of all the docs in the |
| release archives. |
| |
| Daniel (12 Oct 2002) |
| - Trying to connect to a host on a bad port number caused the multi interface |
| to never return failure and it appeared to keep on trying forever (it just |
| didn't do anything). |
| |
| Daniel (11 Oct 2002) |
| - Downloading HTTP without headers didn't work 100%, some of the initial data |
| got written twice. Kevin Roth reported. |
| |
| - Kevin Roth found out the "config file" parser in the client code could |
| segfault, like if DOS newlines were used. |
| |
| Version 7.10.1 (11 Oct 2002) |
| |
| Daniel (10 Oct 2002) |
| - Jeff Lawson fixed a few problems with connection re-use that remained when |
| you set CURLOPT_PROXY to "". |
| |
| Daniel (9 Oct 2002) |
| - Craig Davison found a terrible flaw and Cris Bailiff helped out in the |
| search. Getting HTTP data from servers when the headers are split up in |
| multiple reads, could cause junk data to get inserted among the saved |
| headers. This only concerns HTTP(S) headers. |
| |
| Daniel (8 Oct 2002) |
| - Vincent Penquerc'h gave us the good suggestion that when the ERRRORBUFFER |
| is set internally, the error text is sent to the debug function as well. |
| |
| - I fixed the telnet code to timeout properly as the option tells it to. On |
| non-windows platforms. |
| |
| Daniel (7 Oct 2002) |
| - John Crow pointed out that libcurl-the-guide wasn't included in the release |
| tarball! |
| |
| - Kevin Roth pointed out that make install didn't do right if build outside |
| the source tree (ca-bundle wise). |
| |
| - FOLLOWLOCATION bugfix for the multi interface |
| |
| Daniel (4 Oct 2002) |
| - Kevin Roth got problems with his cygwin build with -no-undefined was not |
| present in lib/Makefile.am so I put it back in there again. The poor one who |
| needs to remove it again must write a configure script to detect that need. |
| |
| - Ralph Mitchell pointed out that curl was a bit naive and didn't deal with ./ |
| or ../ stuff in the string passed back in a Location: header when following |
| locations. |
| |
| - Albert Chin helped me to work out a better configure.in check for zlib, and |
| both --without-zlib and -with-zlib seem to work rather well right now. |
| |
| - Zvi Har'El improvied the OpenSSL ENGINE check in the configure script to |
| become more accurate. |
| |
| Daniel (1 Oct 2002) |
| - Detlef Schmier pointed out the lack of a --without-libz option to configure, |
| so I added one. |
| |
| Version 7.10 (1 Oct 2002) |
| |
| Daniel (30 Sep 2002) |
| - Modified the curl_version_info() proto and returned struct once again, and |
| updated the man page accordingly. |
| |
| - Cris Bailiff found out that the pre-releases crashed on name lookups on |
| names such as "a:" or "baz:" (on Linux versions not being ipv6-enabled) due |
| to some weird return codes from gethostbyname_r(). I'll blame the complete |
| lack of docs in that department. Cris provided a fix, which I modified only |
| slightly. |
| |
| Daniel (27 Sep 2002) |
| - After a suggestion from Christian Kurz to Debian curl package maintainer |
| Domenico Andreoli, I made it possible to override the proxy environment |
| variables better. Now, by setting -x "" you can explicitly tell libcurl to |
| not use a proxy, no matter whan the environment variables say. |
| |
| Version 7.10-pre4 |
| |
| Daniel (26 Sep 2002) |
| - Extended curl_version_info() more and wrote a man page for it. |
| |
| Daniel (25 Sep 2002) |
| - libcurl could leak memory when downloading multiple files using http ranges, |
| reported and fixed by Jean-Luc Guevel. |
| |
| - Walter J. Mack provided code and docs for the new curl_free() function that |
| shall be used to free memory that is allocated by libcurl and returned back |
| to the application, as curl_escape() and curl_unescape() do. |
| |
| - Yarram Sunil pointed out a flaw in the multi interface where a failed |
| connection didn't close down properly and thus a second transfer using the |
| same handle failed. |
| |
| - Andrés García fixed a flaw that made (among other things) dict-fetches |
| return a random value. |
| |
| Daniel (24 Sep 2002) |
| - Wez Furlong brought his initial patch that introduced curl_version_info(). |
| We might need to tweak it somewhat before release. |
| |
| Daniel (20 Sep 2002) |
| - Craig Markwardt fixed another Tru64 IP resolve problem. |
| |
| Daniel (19 Sep 2002) |
| - Dolbneff A.V and Spiridonoff A.V made the file:// code work with resumes |
| in the same style other code does. |
| |
| - Ilguiz Latypov fixed a flaw in the client code when fetching multiple URLs |
| and -C - was used. The first file's resume position was then accidentally |
| reused on all the other files too. |
| |
| Daniel (18 Sep 2002) |
| - The curl_easy_setopt.3 man page was greatly modified and the options have |
| now been grouped in logical groups so that it should be somewhat easier to |
| read it and find things you search for. |
| |
| Daniel (13 Sep 2002) |
| - Kevin Roth pinpointed a scary flaw in libcurl, when the HTTP server doesn't |
| send any headers back, only raw content. Right, that is a violation of the |
| standard but still happens at times and we need to deal with it. Test case |
| 306 was added to verify that we do right now. |
| |
| Version 7.10-pre3 |
| |
| Daniel (11 Sep 2002) |
| - Lukasz Czekierda found out that curl didn't send a correct HTTP Host: header |
| when you specified the URL with an IPv6 IP-address. |
| |
| Daniel (4 Sep 2002) |
| - Sven Neuhaus made --silent being acknowledged even when multiple URLs |
| were used. It used to output "[1/2]: http://host/a.html.de --> a.html.d" etc |
| even when told to shut up. |
| |
| Daniel (3 Sep 2002) |
| - Updated all source code headers to use MIT-license references only, and |
| point to the COPYING file and the http://curl.haxx.se/docs/copyright.html |
| URL. I've cut out all references to MPL that I could find. |
| |
| - Corected the makefiles to not always use -lz when linking |
| |
| Version 7.10-pre2 |
| |
| Daniel (2 Sep 2002) |
| - James Gallagher added Content-Encoding support to libcurl so now curl and |
| libcurl-using apps can request compressed contents using the 'deflate' |
| method. See the special file lib/README.encoding for details. |
| |
| curl --compressed is now used to request compressed contents. |
| |
| curl-config --feature will include 'libz' if this feature was around when |
| the library was built. |
| |
| Daniel (30 Aug 2002) |
| - Applied an anonymous SOCKS5-proxy patch. Not properly working in all |
| situations though, as all getaddrinfo()-using libcurls will fail on this. |
| This is because of the somewhat naive way the current code tries to extract |
| the IP address of the proxy. |
| |
| - Fixed up the SSL cert fixes from the other day even more after more inputs |
| from Cris. Added three new SSL error codes to make the |
| CURLE_SSL_CONNECT_ERROR slightly less overloaded. |
| |
| Daniel (27 Aug 2002) |
| - After lots of talk with Tom Zerucha, Nick Gimbrone and Cris Bailiff I |
| decided to talk the bold path and I now made libcurl do CA certificate |
| verification by default. Thus library users need to explicitly turn this off |
| if you want to connect to sites without proper checking. We also install a |
| CA cert bundle on 'make install' now. |
| |
| The curl tool now requires the -k/--insecure option in order to allow |
| connections and operations on SSL sites that aren't properly verified with |
| -cafile or --capath. |
| |
| curl-config --ca displays the built-in path to the CA cert bundle. |
| |
| Daniel (26 Aug 2002) |
| - Andrew Francis cleaned up some code that now compiles fine without the need |
| for ugly MSVC pragmas. |
| |
| - Keith MacDonald found a minor bug in src/main.c that made it close stdin |
| instead of the actual file handle. It shouldn't have resulted in much |
| trouble as most operating systems close all file handles on process exit |
| anyway. |
| |
| Daniel (22 Aug 2002) |
| - Markus Oberhumer provided some documentation for his previously provided |
| CURLOPT_NOSIGNAL fix. |
| |
| - Patched the lib/Makefile.am to hopefully no longer complain on undefined |
| symbols that seemed to occur on builds with shared OpenSSL libraries on |
| Solaris lately... |
| |
| Daniel (20 Aug 2002) |
| - Fixed compiler warnings on MSCV++ compiles. We're looking for help here: |
| remove the pragmas from lib/config-win32.h and adjust the sources where |
| the warnings occur. Hiding them with pragmas like this is not the correct |
| way of dealing with compiler warnings. |
| |
| Daniel (13 Aug 2002) |
| - Ulrich Zadow made the global include files in curl/* include themselves |
| using "curl.h" instead of <curl/curl.h> which thus allows people to more |
| freely decide how to include curl and how to setup their include paths. |
| |
| - Sterling Hughes added the curl_share* interface, somewhat as discussed |
| previously. |
| |
| - Jörn Hartroth pointed out that poll() was used in the pre1 source code and |
| it isn't very portable, so now I check for it in the configure script and |
| work around it. |
| |
| Version 7.9.9-pre1 |
| |
| Daniel (12 Aug 2002) |
| - Applied my initial take on making the multi stuff more asynchronous. Connects |
| should now return back without "hanging" until it has connected for real. |
| This should also be the case for FTP-PASV connects. |
| |
| Daniel (9 Aug 2002) |
| - Applied Markus F.X.J. Oberhumer's patch that introduces CURLOPT_NOSIGNAL, |
| which effectively prevents libcurl from doing anything that may cause |
| signals to get sent. This is basicly for multi-threaded applications that |
| now can use timeouts properly, without risking any signals to burst in and |
| ruin the party. |
| |
| Daniel (5 Aug 2002) |
| - Lukasz Czekierda reported that RFC2732-style literal IPv6 addresses didn't |
| work. When did that code vanish? Anyway, it's back again now and seems to |
| work! |
| |
| - Jonatan Lander found out that POSTing an empty string didn't work with the |
| command line tool. |
| |
| Daniel (3 Aug 2002) |
| - Jörn Hartroth fixed the libcurl.def file to build the windows DLL with |
| the multi interface enabled. |
| |
| Daniel (1 Aug 2002) |
| - The ftp PORT command now uses a better default IP address, as it will |
| extract and use the local IP address used by the control connection. |
| |
| - Modified the #include lines in curl/multi.h to work better on more |
| platforms. |
| |
| Daniel (31 Jul 2002) |
| - Attempted a fix for Ray DeGennaro's reported HP-UX host name resolve |
| problems. |
| |
| Daniel (30 Jul 2002) |
| - Priya Ramakrishnan and Ryan Jones compiles curl/curl.h with a C++ compiler |
| and don't get __STDC__ defined, which required us to extend the preprocessor |
| check for the ## operator usage. |
| |
| - Correct the description for CURLOPT_PASSWDFUNCTION, if set to NULL the |
| internal default function will be put back. |
| |
| - danfuzz at milk.com found out that libcurl badly assumed a space after |
| 'Set-Cookie:' so if it wasn't present, it caused the first letter of the |
| cookie name to fall off! |
| |
| Daniel (29 Jul 2002) |
| - The password prompt asking for user password used stdout and now uses |
| stderr instead to better allow redirecting. It also leaked a fopen() file |
| handle that is now fixed. |
| |
| Daniel (28 Jul 2002) |
| - HAVE_SETVBUF was left out from src/main.c which made -N not work. Found out |
| by M T. |
| |
| Daniel (26 Jun 2002) |
| - Glen Nakamura solved a crash in the name resolving function for IP-only |
| addresses on Alpha Linux (at least). |
| |
| - T. Bharath corrected the high resolution timer introduced in 7.9.8. |
| |
| Daniel (22 Jun 2002) |
| - Andrés García pointed out man page errors in curl_formadd.3. I fixed. |
| |
| Daniel (19 Jun 2002) |
| - Chris Combes pointed out a flaw in curl_escape(). I fixed. We no longer |
| tries to generate nor parse '+' in URLs. Spaces become %20, and only %-codes |
| are translated by curl_unescape(). |
| |
| Daniel (15 Jun 2002) |
| - Added --limit-rate to the curl tool. Allows the user to set a maxmimum |
| upper limit to how much bandwidth to use for transfers. |
| |
| - CURLOPT_BUFFERSIZE was added to libcurl. This sets a prefered size for the |
| receive buffer in libcurl. The main point of this would be that the write |
| callback gets called more often and with smaller chunks. |
| |
| Daniel (14 Jun 2002) |
| - Yarram Sunil found out that the SocketIsDead() function performed a lot |
| faster on Windows when removing the 1 microsecond timeout. |
| |
| - Hanno L. Kranzhoff fixed the VC++ project files. |
| |
| - Tom Mattison found out that ftp transfers closed the connection a little |
| too often. |
| |
| - Miklos Nemeth posted a VC++ makefile fix and some INSTALL comments on how |
| to disable specific protocols when building for Windows. |
| |
| Version 7.9.8 |
| |
| Daniel (13 Jun 2002) |
| - Time to let this baby go. |
| |
| Daniel (12 Jun 2002) |
| - Chris Combes added three new options for curl_formadd(): CURLFORM_BUFFER, |
| CURLFORM_BUFFERPTR, CURLFORM_BUFFERLENGTH. They are used to create a |
| multipart that appears as a regular file upload, but the data is provided |
| with a pointer and length. |
| |
| - Nico Baggus made the VMS version use sigsetjmp() too. |
| |
| - Jörn Hartroth fixed the mingw32 build using the mm lib. |
| |
| - Applied patches by Kris Kennaway that correct format string problems in |
| lib/ftp.c and lib/ldap.c. |
| |
| Version 7.9.8-pre3 |
| |
| Daniel (11 Jun 2002) |
| - James Cone brought the idea of using sigsetjmp() in the signal handler to |
| make the time-out of name lookups to work, even when the underlying name |
| resolver library traps EINTR. The use of sigsetjmp() and siglongjmp() for |
| this may be a bit drastic, and also not likely to exist on all platforms. I |
| added careful checking for this in the configure script, even checks for it |
| being a macro (which seems to be the case in for example Linux). |
| |
| sigsetjmp() seems to be mentioned in the Single Unix specification. |
| |
| - Miklos Nemeth brought a patch that allows libcurl to get built with specific |
| protocols disabled. This is done by running ./configure |
| --disable-[protocol]. |
| |
| - FTP range downloads could make CURLE_FTP_WRITE_ERROR get returned. We now |
| make precautions to not return this for range downloads. |
| |
| Added test case 135 that makes an ftp range download. Had to tweak the |
| runtests.pl script a bit too. |
| |
| - Bug report #566835 identified a strlen() on a NULL pointer. Added additional |
| check to prevent this. |
| |
| Daniel (10 Jun 2002) |
| - Found and corrected a connect failure problem that didn't create a human |
| error text. |
| |
| - Added code to compile with OpenSSL 0.9.7. Based on patch from Jacob Meuser |
| and comments from Götz Babin-Ebell. |
| |
| - Gautam Mani found a socket descriptor leak that happened when FTP transfers |
| failed and you reinvoked curl_easy_perform(). |
| |
| Daniel (5 Jun 2002) |
| - Gustaf Hui corrected curl_multi_remove_handle() so that it won't crash no |
| matter when you decide to remove the CURL handle. |
| |
| - HAVE_RAND_STATUS was added to lib/config-win32.h by Andreas Olsson, as it |
| makes windows builds stop complaining about "weak seeding" when it in fact |
| isn't. |
| |
| - Another 64bit architecture crash that was introduced in 7.9.7 was now |
| removed, as bug report #564585 clarified. This happened due to our attempts |
| to only allocate only as much memory as is actually needed for name |
| resolving (using realloc) which called for a function that could 'move' a |
| hostent struct in memory. |
| |
| Version 7.9.8-pre2 |
| |
| Daniel (3 Jun 2002) |
| - T. Bharath fixed the CURLINFO_REDIRECT_TIME to return a correct time and |
| made the CURLINFO_REQUEST_SIZE return the correct total request size. He |
| also made the win32 timers use higher resolution than before. |
| |
| Daniel (29 May 2002) |
| - Renaud Chaillat made me aware of the fact that libcurl returned an error if |
| you tried to get an empty FTP file. This seemed like a wrong thing to do, so |
| now it no longer does that! I just hope that no one built anything fancy |
| upon this unexpected behavior... |
| |
| Daniel (28 May 2002) |
| - Cris Bailiff brought CURLOPT_CAPATH that works like CURLOPT_CAINFO but |
| specifies a path to a directory with certificates rather than a single file |
| with them all concatenated. --capath was added to the command line tool |
| for the same function. |
| |
| Windows users need to pay attention that the directory should be setup with |
| the c_rehash tool of the OpenSSL package, and that creates symlinks by |
| default that need to be replaced with actual copies to work on Windows. |
| |
| - Gustaf Hui provided new code that changes how curl_multi_info_read() |
| messages are stored, so that they don't have to be kept around for the multi |
| handle's entire life time. He also made it return failure codes properly |
| which it didn't do before. |
| |
| Daniel (27 May 2002) |
| - Gustaf Hui pointed out that running curl_multi_perform() without doing |
| curl_multi_fdset() first was not really a working combo. I added an internal |
| check for this and have some extra select() code without timeout to make the |
| library internals work identically nevertheless. We might need to somehow |
| either document that once you've used the *_fdset() you should remain using |
| them in select() or you should blank them somehow so that libcurl won't go |
| crazy. |
| |
| Version 7.9.8-pre1 |
| |
| Daniel (22 May 2002) |
| - James Cone brought an excellent patch, including several tests and docs! |
| CURLOPT_NETRC now takes an enum as argument instead of the previous boolean. |
| --netrc-optional was introduced as an addition to --netrc to allow the |
| command line client to take use of all that new netrc stuff. |
| |
| - Bug report #558888 showed a case where libcurl re-used the previous host |
| name when a connection over a proxy was re-used but to a different target |
| host. |
| |
| Daniel (21 May 2002) |
| - Edin Kadribasic helped me sort out a problem to made libcurl crash when |
| trying to HTTP POST an empty string. |
| |
| - Clarified that Juergen Wilke donated the original tests/server/sws.c code. |
| |
| - Jean-Philippe Barrette-LaPierre made curl_formadd() return a typedef named |
| CURLFORMcode instead of the previous 'int', and the various return codes are |
| now globally exported. It allows applications to better figure out what goes |
| wrong when curl_formadd() returns errors. |
| |
| Daniel (20 May 2002) |
| - Roland Zimmermann pointed out that SSL_CTX_use_certificate_chain_file() |
| is prefered to SSL_CTX_use_certificate_file(). |
| |
| Daniel (17 May 2002) |
| - Bug report #556869 pointed out that src/writeout.c didn't compile on freebsd |
| after my AIX fixes the other week. |
| |
| - Bug report #556930 pointed out a FreeBSD core dump introduced in 7.9.7 in |
| the DNS struct realloc stuff. Actually, this crash could happen on all |
| systems that made the pack_hostent() function get invoked. |
| |
| - I removed several compiler warnings in the test suite's HTTP server. |
| |
| Version 7.9.7 |
| |
| Daniel (10 May 2002) |
| - Kevin Roth adjusted the --trace-ascii output slightly. |
| |
| - Paul Harrington found out that src/writeout.c needed an additional header |
| file included for AIX builds |
| |
| Version 7.9.7-pre2 |
| |
| Daniel (7 May 2002) |
| - Updated the man page with --trace-ascii and -j/--junk-session-cookies. |
| |
| - Made --trace-ascii do pretty much the same as --trace but without the hex |
| part in the output. |
| |
| - Added CURLOPT_COOKIESESSION that when enabled makes libcurl ignore session |
| cookies read from a file. This option is enforced by the curl command line |
| tool using the new -j/--junk-session-cookies option. After discussions with |
| Kevin Roth. This makes it easier to use curl to fully emulate a browser's |
| behavior, even when it comes to "session cookies". Session cookies are |
| cookies that a normal browser discards when the browser is shut |
| down. They're identified by not having any expire date/time. |
| |
| - When CURLOPT_DEBUGDATA was set, it ruined the CURLOPT_STDERR setting and |
| this was discovered when --trace was made to crash. |
| |
| - Using -v and --trace at the same time confused matters. -v is now pretty |
| much ignored when --trace or --trace-ascii is used. |
| |
| - Made --trace (and --trace-ascii) support - as file name to pass output to |
| stdout instead. It makes it consistent with how other options work. |
| |
| Version 7.9.7-pre1 |
| |
| Daniel (6 May 2002) |
| - Added multi-post.c to the examples directory. I got the basic source for |
| this from Gustaf Hui. |
| |
| Daniel (3 May 2002) |
| - CURL_MAX_WRITE_SIZE is now an exported #define in the curl/curl.h header and |
| can be used to figure out the maximum buffer size your write callback can |
| get. |
| |
| - CURLOPT_READDATA is now an alias for CURLOPT_INFILE and CURLOPT_WRITEDATE is |
| an alias for CURLOPT_FILE. These two were added for conformity. Most other |
| callback function's userdata are provided with options using a similar name- |
| scheme. |
| |
| - Added "--trace [file]" to the command line tool. It makes a very detailed |
| trace dump get stored, with a full protocol dump that includes all received |
| and transmitted data. This could be a very effective tool for debugging what |
| goes wrong. This dump includes every byte the way it is sent to/received |
| from the server. The dump is the plain-text version, so SSL transfers will |
| still be readable. |
| |
| - I found out that the DEBUGFUNCTION was not called properly everywhere as we |
| wanted it to. I fixed it. |
| |
| - -D now stores all headers to the same file if multiple URLs are given on the |
| command line! Kevin Roth made me aware of that it didn't already do this! |
| |
| - Gustaf Hui wrote an excellent formpost example that used the multi |
| interface. Unfortunately, it didn't work due to several bugs in how |
| transfers were made when the multi interface was used. |
| |
| Daniel (2 May 2002) |
| - Hanno Kranzhoff found out that when doing multiple transfers on the same |
| easy handle, the progress meter would show a bad "currently downloaded |
| value" when the transfer starts. |
| |
| Daniel (1 May 2002) |
| - Applied another patch by Jacky Lam to make the name resolve info realloc() |
| stuff work properly. |
| |
| Daniel (28 April 2002) |
| - curl_multi_info_read() is now implemented! |
| |
| Daniel (27 April 2002) |
| - Updated BUGS, TODO, FAQ, INSTALL and added BINDINGS. |
| |
| - I think I fixed the DNS cache prune crach Jacky Lam found and reported. |
| |
| - I cleaned up the name prefix stuff in the hash and llist modules. |
| |
| - FTP responses should now be better on timing out properly. The timeout value |
| is maximum timeout for the entire request operation, but before this, the |
| timeout was used as a maximum allowed time between two reads... |
| |
| Daniel (26 April 2002) |
| - Fixed the test suite http server to not use snprintf() anymore due to better |
| portability. |
| |
| Daniel (25 April 2002) |
| - With Sterling Hughes' new DNS pruning, Jacky Lam asked if this wouldn't |
| cause problems since the pruning is only checking the entry time, and it |
| sure could cause problems. Therefor, I've now added and changed code so that |
| this should not be a problem. Nowhere in the code will be store name |
| resolved information around so that a sunsequent DNS cache prune should |
| cause a problem. This of course called for some mild internal changes. |
| |
| Daniel (23 April 2002) |
| - Improved the 'no_proxy' check, as using port numbers in the URL confused it |
| previously. Reported by Erwan Legrand in bug report #547484. |
| |
| - The --interface option now works even on IPv6 enabled builds. Reported by |
| 'thor'. |
| |
| Daniel (22 April 2002) |
| - The #defines names starting with TIMECOND now has CURL_ prefixes. (The old |
| names are still #defined too.) Pointed out by Robert Olson. |
| |
| - Jacky Lam brought code that lets the name resolve function only use as much |
| memory as it actually needs. This only works on certain operating systems, |
| but is totally transparant to all users. |
| |
| Daniel (19 April 2002) |
| - Bjorn Reese fixed pack_hostent to work properly with 64 bit pointers. |
| |
| Daniel (18 April 2002) |
| - Sterling Hughes added code to prune old DNS cache entries, since Jacky Lam |
| experienced very big caches. |
| |
| Daniel (17 April 2002) |
| - Dirk Manske patched the 301 response to work against the RFC but more like |
| common browsers do. If a POST get a 301 back, it'll switch to GET in the |
| next request (if location-following is enabled). |
| |
| Daniel (16 April 2002) |
| - Dirk Manske posted a patch originally written by Ingo Wilken that introduced |
| two new CURLINFO_* values: CURLINFO_REDIRECT_TIME and |
| CURLINFO_REDIRECT_COUNT. |
| |
| Daniel (15 April 2002) |
| - Jonatan Lander patched the verbose text 'Disables POST, goes with GET' to |
| reflect reality better, like when the first request isn't POST and when |
| the second isn't GET... :-) |
| |
| - Craig Davison pointed out that when curl_formadd()ing a file that doesn't |
| exist, libcurl doesn't return error. Now, curl_easy_perform() will return |
| CURLE_READ_ERROR if that is the case. Test 41 was added to verify this. |
| |
| Version 7.9.6 |
| |
| Daniel (14 April 2002) |
| - Dirk Manske brought a fix that makes libcurl strip off white spaces from the |
| beginning of cookie contents. |
| |
| - Had to patch include/curl/curl.h since MSVC doesn't set the __STDC__ define. |
| Moonesamy pointed out the problem, Bjorn Reese the solution. |
| |
| Version 7.9.6-pre5 |
| |
| Daniel (12 April 2002) |
| - Fixed the TIMER_CONNECT to be more accurate for FTP transfers. Previously |
| FTP transfers got the "connect done" time set after the initial FTP commands |
| and not directly after the TCP/IP connect as it should. |
| |
| I also made the time stamp get set even if the connect itself fails, which |
| it didn't do previously. |
| |
| - Jean-Philippe Barrette-LaPierre provided his patch that introduces |
| CURLOPT_DEBUGFUNCTION and CURLOPT_DEBUGDATA. They allow a program to a set a |
| callback to receive debug/information data. That includes headers and data |
| that is received and sent. CURLOPT_VERBOSE still controls it. |
| |
| By default, there is an internal debugfunction that will make things look |
| and work as before if not changed. |
| |
| Daniel (10 April 2002) |
| - Sebastien Willemijns found out that -x didn't use the default port number as |
| is documented. It does now. |
| |
| - libcurl-errors.3 is a new man page attempting to document all libcurl error |
| codes |
| |
| - Added two new error codes and changed the behaviour of two old ones |
| slightly: |
| |
| CURLE_WRITE_ERROR |
| This error was returned *both* for errors that occured when writing |
| received data to a local file, as well as when we get problems writing data |
| to a remote server. CURLE_SEND_ERROR has now been added for the latter |
| error. |
| |
| CURLE_READ_ERROR |
| This error was similarly returned *both* for errors when reading a local |
| file, as well as when getting problems when reading network data. |
| CURLE_RECV_ERROR has now been added for the latter error. |
| |
| (Two test cases were adjusted accordingly.) |
| |
| Daniel (9 April 2002) |
| - runtests.pl now sets the HOME variable before running curl, to prevent any |
| actual ~/.curlrc file to fool the tests! |
| |
| Version 7.9.6-pre4 |
| |
| Daniel (8 April 2002) |
| - Michael Curtis provided new functionality for curl on some platforms. Using |
| the --environment option, curl will *set* a bunch of environment variables |
| to values. The names are the same ones as for the -w/--writeout option. |
| |
| For now, this only works on the RISC OS version, as this feature relies on |
| both OS support and that it matches OS paradigms. |
| |
| - Jacky Lam provided a fix for getting headers-only when the reply is HTTP/1.0 |
| and 304, I edited it slightly. |
| |
| Daniel (5 April 2002) |
| - As requested by Jay Graves, the '.curlrc' file (or _curlrc as it is called |
| when used in windows), is now loaded from the current directory if the HOME |
| environment variable isn't set (or if it is too long). I also enlarged the |
| array used to store the full file path in, to 512 bytes. |
| |
| - Kevin Roth pointed out to me why the "19 March" change regarding -G and -I |
| was stupid and the change was reverted. Added test case 48 to verify the |
| functionality. |
| |
| Version 7.9.6-pre3 |
| |
| Daniel (4 April 2002) |
| - Jonatan Lander brought a patch that makes curl/curl.h compile nicely on |
| pre-ISO compilers, like when using gcc -traditional. |
| |
| Daniel (3 April 2002) |
| - Jacky Lam identified a glitch when getting headers-only, where libcurl would |
| "hang" 1 second in vain in the select() loop before returning back. |
| |
| - Tor Arntsen brought a patch for multipart formposts. It turned out that the |
| "CGI_Lite Perl package" makes some bad assumptions on what letters that may |
| be used in boundary strings and thus curl could confuse it by including '+' |
| and '/'. While this is standards-compliant, we change the behavior to work |
| smoothly with existing software based on that package. |
| |
| Daniel (2 April 2002) |
| - Gerhard Herre filed bug report #536238 where he pointed out a crash in |
| verbose FTP passive transfers for AIX. |
| |
| - Clarence Gardner pointed out a minor flaw in how libcurl didn't properly |
| take care of all errors that SSL_read() could return. |
| |
| - Jacky Lam fixed a MALLOCDEBUG problem in lib/getinfo.c |
| |
| Daniel (27 March 2002) |
| - T. Bharath pointed out a flaw in the connection re-use function that didn't |
| check proxy connections properly for "deadness" before they were re-used. |
| |
| - Pedro Neves found out that HTTP POSTing with --data-binary did not properly |
| work under Windows as the file specified wasn't read fully binary! |
| |
| Daniel (25 March 2002) |
| - Jacky Lam brought a fix that improves treatment of cookies using identical |
| domains but with leading dots properly. |
| |
| Daniel (22 March 2002) |
| - Miklos Nemeth updated the windows section of the docs/INSTALL file and the |
| windows makefiles. |
| |
| - Jon Dillon provided us with several good-looking curl images for |
| promotion. View them here http://curl.haxx.se/icons.html |
| |
| Daniel (20 March 2002) |
| - Peter Verhas found out that CRLF replacement in uploads was not working. I |
| fixed it, and added test case 128 that verifies the functionality. |
| |
| - The list formerly known as curl-main is now named curl-users and is hosted |
| by sourceforge. Susbcribe to the new list, get off the old one. |
| |
| Version 7.9.6-pre2 |
| |
| Daniel (19 March 2002) |
| - Made -G and -I on the same command line cause an error. |
| |
| - Moved the multi.h file to the "public" include directory and made it get |
| included by curl.h so that no extra include files will be necessary to use |
| it. |
| |
| Added docs and man pages for the multi interface to the release archive. |
| Added the three example source codes too. |
| |
| Necessary steps in my campaign to sneak in the multi interface... ;-) |
| |
| - Updated the year in all copyright notices in all C and H files. |
| |
| Daniel (18 March 2002) |
| - Tomas Szepe found out that -d and -G didn't mix as they should. I broke this |
| in 7.9.5... Added test case 32 for this. |
| |
| Version 7.9.6-pre1 |
| |
| Daniel (16 March 2002) |
| - Peter Verhas pointed out that the curl_escape and curl_unscape man pages |
| contained factual errors. |
| |
| - Albert Choy found and corrected a problem with the verbose output when doing |
| PASV ftp transfers. It could make libcurl crash. |
| |
| Details in bug report #530562: |
| http://sourceforge.net/tracker/?func=detail&atid=100976&aid=530562&group_id=976 |
| |
| Daniel (15 March 2002) |
| - Jun-ichiro itojun Hagino filed bug report #530204 that clearly pointed out |
| the PF_INET fix from February 19 as a not-very-good fix as it broke IPv6 |
| capability! That patch is now reverted. |
| |
| The problem with slow name lookups with getaddrinfo() on non-IPv6 enabled |
| hosts are instead made by first checking if the stack is IPv6-enabled and if |
| not, the PF_INET is used and otherwise we go with the full PF_UNSPEC. |
| |
| - T. Bharath pointed out that when we return an "error" from a WRITEFUNCTION |
| as described in the man page, libcurl did not return the documented error |
| code (CURLE_WRITE_ERROR) but would instead return CURLE_READ_ERROR. This is |
| now corrected. |
| |
| Daniel (14 March 2002) |
| - Setting CURLOPT_POST without setting CURLOPT_POSTFIELDS now read the POST- |
| data from the callback. |
| |
| - The GOPHER support seems to be broken. I don't think I'll even start fixing |
| it until someone else finds out... :-) |
| |
| Daniel (13 March 2002) |
| - Trying 'curl -I ftp.sunet.se' or similar did a SIZE on a silly "(nil)" |
| string. If such a file would be present, curl returned the size of it! Now |
| we prevent this. |
| |
| - Curl_sendf() was fixed to deal with situation where Curl_write() would've |
| blocked and thus return -1. |
| |
| - Setting CURLOPT_PROGRESSFUNCTION to NULL now restores the internal function. |
| |
| - All CURLFORM_* options can now be used in a CURLFORM_ARRAY except the |
| CURLFORM_ARRAY itself. This was necessary since we couldn't expand the |
| CURLFORM_* list proprely and unrestricted until this was the case. It was |
| also a bit peculiar to users why some options could be used in an array |
| while others couldn't. |
| |
| - Removed some silly CRLF lines that had accidentally slipped into src/main.c |
| Nico Baggus pointed them out to me. |
| |
| Daniel (11 March 2002) |
| - CURLFORM_FILENAME was added. This can be set when creating a file upload |
| part, to set the 'filename' field to a custom value. If this isn't used, |
| the actually used filename will be included instead (as libcurl always has |
| done). curl was adjusted accordingly, and now -F accepts a 'filename=' field |
| too, and allows constructs such as: |
| |
| -F 'name=@filename;filename=/dev/null' |
| |
| and this can be combined with type= too, in a manner similar to: |
| |
| -F "file=@log/test39.txt;filename=fakerfile;type=moo/foobar" |
| |
| Test case 39 was added to verify this functionality. |
| |
| - The struct formerly known as HttpPost is now named curl_httppost to properly |
| use the curl name space. I added a #define for the old name to make existing |
| programs compile even when this new include file is used. |
| |
| Daniel (8 March 2002) |
| - Clifford also discovered that if the client code failed early, as when doing |
| "curl -O" only, it would do fclose(NULL) which caused a segmentation fault |
| on some systems. |
| |
| - Clifford Wolf provided a patch that made --progress-bar work again. |
| |
| - I closed bug report #527032 by making sure that we add a newline after a |
| transfer when --progress-bar has been used. Before, without the newline, it |
| made the subsequent text come out wrong. |
| |
| Version 7.9.5 |
| |
| Daniel (7 March 2002) |
| - Added docs/KNOWN_BUGS to the release archive. |
| |
| Daniel (6 March 2002) |
| - Kevin Roth corrected a flaw in the curl client globbing code that made it |
| mess up backslashes. This was most notable on windows (cygwin) machines when |
| using file://. |
| |
| - Brad provided another fix for building outside the source-tree. |
| |
| - Ralph Mitchell patched away a few compiler warnings in tests/server/sws.c |
| |
| Daniel (5 March 2002) |
| - I noticed that the typedef in curl.h for the progress callback prototype was |
| wrong and thus applications that used it would not get the proper input |
| data. It used size_t where the implementation actually uses doubles! |
| |
| I wish I could blame someone else, but this was my fault. Again. |
| |
| Version 7.9.5-pre6 |
| |
| Daniel (4 March 2002) |
| - Cut off the changes done during 2001 from this changelog file and put them |
| in a separate file (CHANGES.2001), available from CVS of course. |
| |
| - I removed the multi directory. The example sources were moved to the |
| docs/examples directory where they belong. |
| |
| - Wrote 7 new man pages for the current functions in the new multi interface. |
| They're all still pretty basic, but we can use them as a start and add more |
| contents to them when we figure out what to write. The large amount of man |
| pages for libcurl now present made me decide to put them in a new separate |
| subdirectory in the docs directory. Named libcurl. |
| |
| - Giuseppe Corbelli provided a template file for the EPM package manager, it |
| gets generated nicely by the configure script now. |
| |
| Version 7.9.5-pre5 |
| |
| Daniel (1 March 2002) |
| - Moved the memanalyze.pl script into the tests/ dir and added it to the |
| release archives. It was previously only present in the CVS tree. |
| |
| - Modified the February 17th Host: fix, as bug report #523718 pointed out that |
| it caused crashes! |
| |
| - Nico Baggus added more error codes to the VMS stuff. |
| |
| - Wesley Laxton brought the code that introduced the new CURLOPT_PREQUOTE |
| option. It is just another FTP quote option that allows the user to specify |
| a list of FTP commands to issue *just before* the transfer command (RETR or |
| STOR etc). It has turned up a few systems that really need this. |
| |
| The curl command line tool can also take advantage of this by prefixing the |
| quote commands with a plus (+) in similar style that post transfer quote |
| commands are specified. |
| |
| This is not yet documented. There is no test case for this yet. |
| |
| Daniel (28 February 2002) |
| - Ralph Mitchell made some serious efforts and put a lot of sweat in setting |
| up scripts and things for me to be able to repeat his problems, and I |
| finally could. I found a problem with the header byte counter that wasn't |
| increased properly and thus we could return CURLE_GOT_NOTHING when we in |
| fact had received data. |
| |
| Daniel (27 February 2002) |
| - I had to revert the non-space parsing cookie fix I posted to the mailing |
| list. Expire dates do have spaces and still need to get parsed properly! |
| Instead we just ignore trailing white space and it seems to work... |
| |
| Daniel (26 February 2002) |
| - Made the cookie property 'Max-Age' work, just since we already tried to |
| support it, it is better to do it right. No one uses this anyway. |
| |
| - The cookie parser could crash if a really weird (illegal) cookie line was |
| received. I also made it better discard really oddly formatted lines better. |
| |
| Made the cookie jar store the second field from the left using the syntax |
| that Netscape and Mozilla probably like. Curl itself ignores it. |
| |
| Added test case 31 for these cases. |
| |
| Clay Loveless' email regarding some cookie issues started my cleanup. |
| |
| - Kevin Roth pointed out that my automake fiddles broke the ability to build |
| outside the source-tree and I posted a patch to the mailing list that brings |
| this ability back. |
| |
| Version 7.9.5-pre4 |
| |
| Daniel (25 February 2002) |
| - Fiddled with the automake files to make all source files in the lib |
| directory not have ../src in the include path, and the src sources shouldn't |
| have ../lib! |
| |
| - All 79 test cases ran OK under Linux and Solaris using the new HTTP server |
| in the test suite. The new HTTP server was first donated by Georg Horn and |
| subsequently modified to work with the test suite. It is currently still not |
| portable enough to run on "all over" but this is a start and I can run all |
| curl tests on my machines. This is an important requirement for the upcoming |
| public release. |
| |
| - Using -d and -I on the same command line now reports an error, as it implies |
| two different HTTP requests that can't be mixed. |
| |
| - Jeffrey Pohlmeyer provided a patch that made the -w/--write-out option |
| support %{content_type} to get the content type of the recent download. |
| |
| - Kevin Roth reported that pre2 and pre3 didn't compile properly on cygwin, |
| and this was because I used #ifdef HAVE_WINSOCK_H in lib/multi.h to figure |
| out if we could include winsock.h which turns out not to be a wise choice to |
| do on cygwin since it has the file but can't include it! |
| |
| Daniel (22 February 2002) |
| - Added src/config-vms.h to the release archive. |
| |
| - Fixed the connection timeout value again, the change from February 18 wasn't |
| complete. |
| |
| Version 7.9.5-pre3 |
| |
| Daniel (21 February 2002) |
| - Kevin Roth and Andrés García both found out that lib/config.h.in was missing |
| in the pre-release archive and thus the configure script failed. |
| |
| Version 7.9.5-pre2 |
| |
| Daniel (20 February 2002) |
| - Andrés García provided a solution to bug report #515228. the total time |
| counter was not set correctly when -I was used during some conditions (all |
| headers were read in one single read). |
| |
| - Nico Baggus provided a huge patch with minor tweaks all over to make curl |
| compile nicely on VMS. |
| |
| Daniel (19 February 2002) |
| - Rick Richardson found out that by replacing PF_UNSPEC with PF_INET in the |
| getaddrinfo() calls, he could speed up some name resolving calls with an |
| order of magnitudes on his Redhat Linux 7.2. |
| |
| - Philip Gladstone found a second INADDR_NONE problem where we used long |
| intead of in_addr_t which caused 64bit problemos. We really shouldn't define |
| that on two different places. |
| |
| Daniel (18 February 2002) |
| - Philip Gladstone found a problem in how HTTP requests were sent if the |
| request couldn't be sent all at once. |
| |
| - Emil found and corrected a bad connection timeout comparison that made curl |
| use the longest of connect-timeout and timout as a timeout value, instead of |
| the shortest as it was supposed to! |
| |
| - Aron Roberts provided updated information about LDAP URL syntax to go into |
| the manual as a replacement for the old references. |
| |
| Daniel (17 February 2002) |
| - Philip Gladstone pointed out two missing include files that made curl core |
| dump on 64bit architectures. We need to pay more attention on these details. |
| It is *lethal* to for example forget the malloc() prototype, as 'int' is |
| 32bit and malloc() must return a 64bit pointer on these platforms. |
| |
| - Giaslas Georgios fixed a problem with Host: headers on repeated requests on |
| the same handle using a proxy. |
| |
| Daniel (8 February 2002) |
| - Hanno L. Kranzhoff accurately found out that disabling the Expect: header |
| when doing multipart formposts didn't work very well. It disabled other |
| parts of the request header too, resulting in a broken header. When I fixed |
| this, I also noticed that the Content-Type wasn't possible to disable. It is |
| now, even though it probably is really stupid to try to do this (because of |
| the boundary string that is included in the internally generated header, |
| used as form part separator.) |
| |
| Daniel (7 February 2002) |
| - I moved the config*.h files from the root directory to the lib/ directory. |
| |
| - I've added the new test suite HTTP server to the CVS repository, It seems to |
| work pretty good now, but we must make it get used by the test scripts |
| properly and then we need to make sure that it compiles, builds and runs on |
| most operating systems. |
| |
| Version 7.9.5-pre1 |
| |
| Daniel (6 February 2002) |
| - Miklos Nemeth provided updated windows makefiles and INSTALL docs. |
| |
| - Mr Larry Fahnoe found a problem with formposts and I managed to track down |
| and patch this bug. This was actually two bugs, as the posted size was also |
| said to be two bytes too large. |
| |
| - Brent Beardsley found out and brought a correction for the |
| CURLINFO_CONTENT_TYPE parser that was off one byte. This was my fault, I |
| accidentaly broke Giaslas Georgios' patch. |
| |
| Daniel (5 February 2002) |
| - Kevin Roth found yet another SSL download problem. |
| |
| Version 7.9.4 |
| |
| - no changes since pre-release |
| |
| Version 7.9.4-pre2 |
| |
| Daniel (3 February 2002) |
| - Eric Melville provided a few spelling corrections in the curl man page. |
| |
| Daniel (1 February 2002) |
| - Andreas Damm corrected the unconditional use of gmtime() in getdate, it now |
| uses gmtime_r() on all hosts that have it. |
| |
| Daniel (31 January 2002) |
| - An anonymous bug report identified a problem in the DNS caching which made it |
| sometimes allocate one byte too little to store the cache entry in. This |
| happened when the port number started with 1! |
| |
| - Albert Chin provided a patch that improves the gethostbyname_r() configure |
| check on HP-UX 11.00. |
| |
| Version 7.9.4-pre1 |
| |
| Daniel (30 January 2002) |
| - Georg Horn found another way the SSL reading failed due to the non-blocking |
| state of the sockets! I fixed. |
| |
| Daniel (29 January 2002) |
| - Multipart formposts now send the full request properly, including the CRLF. |
| They were previously treated as part of the post data. |
| |
| - The upload byte counter bugged. |
| |
| - T. Bharath pointed out that we seed SSL on every connect, which is a time- |
| consuming operation that should only be needed to do once. We patched |
| libcurl to now only seed on the first connect when unseeded. The seeded |
| status is global so it'll now only happen once during a program's life time. |
| |
| If the random_file or egdsocket is set, the seed will be re-made though. |
| |
| - Giaslas Georgios introduced CURLINFO_CONTENT_TYPE that lets |
| curl_easy_getinfo() read the content-type from the previous request. |
| |
| Daniel (28 January 2002) |
| - Kjetil Jacobsen found a way to crash curl and after much debugging, it |
| turned out it was a IPv4-linux only problem introduced in 7.9.3 related to |
| name resolving. |
| |
| - Andreas Damm posted a huge patch that made the curl_getdate() function fully |
| reentrant! |
| |
| - Steve Marx pointed out that you couldn't mix CURLOPT_CUSTOMREQUEST with |
| CURLOPT_POSTFIELDS. You can now! |
| |
| Daniel (25 January 2002) |
| - Krishnendu Majumdar pointed out that the header length counter was not reset |
| between multiple requests on the same handle. |
| |
| - Pedro Neves rightfully questioned why curl always append \r\n to the data |
| that is sent in HTTP POST requests. Unfortunately, this broke the test suite |
| as the test HTTP server is lame enough not to deal with this... :-O |
| |
| - Following Location: headers when the connection didn't close didn't work as |
| libcurl didn't properly stop reading. This problem was added in 7.9.3 due to |
| the restructured internals. 'Frank' posted a bug report about this. |
| |
| Daniel (24 January 2002) |
| - Kevin Roth very quickly spotted that we wrongly installed the example |
| programs that were built in the multi directory, when 'make install' was |
| used. :-/ |
| |
| Version 7.9.3 |
| |
| Daniel (23 January 2002) |
| - Andrés García found a persistancy problem when doing HTTP HEAD, that made |
| curl "hang" until the connection was closed by the server. This problem has |
| been introduced in 7.9.3 due to internal rewrites, this was not present in |
| 7.9.2. |
| |
| Version 7.9.3-pre4 |
| |
| Daniel (19 January 2002) |
| - Antonio filed bug report #505514 and provided a fix! When doing multipart |
| formposts, libcurl would include an error text in the actual post if a |
| specified file wasn't found. This is not libcurl's job. Instead we add an |
| empty part. |
| |
| Daniel (18 January 2002) |
| - Played around with stricter compiler warnings for gcc (when ./configure |
| --enable-debug is used) and changed some minor things to stop the warnings. |
| |
| - Commented out the 'long long' and 'long double' checks in configure.in, as |
| we don't currently use them anyway and the code in lib/mprintf.c that use |
| them causes warnings. |
| |
| - Saul Good and jonatan pointed out Mac OS X build problems with pre3 and how |
| to correct them. Two compiler warnings were removed as well. |
| |
| - Andrés García fixed two minor mingw32 building problems. |
| |
| Version 7.9.3-pre3 |
| |
| Daniel (17 January 2002) |
| - docs/libcurl-the-guide is a new tutorial for our libcurl programming |
| friends. |
| |
| - Richard Archer brought back the ability to compile and build with OpenSSL |
| versions before 0.9.5. |
| [http://sourceforge.net/tracker/?func=detail&atid=100976&aid=504163&group_id=976] |
| |
| - The DNS cache code didn't take the port number into account, which made it |
| work rather bad on IPv6-enabled hosts (especially when doing passive |
| FTP). Sterling fixed it. |
| |
| Daniel (16 January 2002) |
| - Georg Horn could make a transfer time-out without error text. I found it and |
| corrected it. |
| |
| - SSL writes didn't work, they return an uninitialized value that caused |
| havoc all over. Georg Horn experienced this. |
| |
| - Kevin Roth patched the curl_version() function to use the proper OpenSSL |
| function for version information. This way, curl will report the version of |
| the SSL library actually running right now, not the one that had its headers |
| installed when libcurl was built. Mainly intersting when running with shared |
| OpenSSL libraries. |
| |
| Version 7.9.3-pre2 |
| |
| Daniel (16 January 2002) |
| - Mofied the main transfer loop and related stuff to deal with non-blocking |
| sockets in the upload section. While doing this, I've now separated the |
| connection oriented buffers to have one for downloads and one for uploads |
| (as two can happen simultaneously). I also shrunk the buffers to 20K |
| each. As we have a scratch buffer twice the size of the upload buffer, we |
| arrived at 80K for buffers compared with the previous 150K. |
| |
| - Added the --cc option to curl-config command as it enables so very cool |
| one-liners. Have a go a this one, building the simple.c example: |
| |
| $ `curl-config --cc --cflags --libs` -o example simple.c |
| |
| Daniel (14 January 2002) |
| - I made all socket reads (recv) handle EWOULDBLOCK. I hope nicely. Now we |
| only need to address all writes (send) too and then I'm ready for another |
| pre-release... |
| |
| - Stoned Elipot patched the in_addr_t configure test to make it work better on |
| more platforms. |
| |
| Daniel (9 January 2002) |
| - Cris Bailiff found out that filling up curl's SSL session cache caused a |
| crash! |
| |
| - Posted the curl questionnaire on the web site. If you haven't posted your |
| opinions there yet, go there and do it now while it is still there: |
| |
| http://curl.haxx.se/q/ |
| |
| - Georg Horn quickly found out that the SSL reading no longer worked as |
| supposed since the switch to non-blocking sockets. I've made a quick patch |
| (for reading only) but we should improve it even further. |
| |
| Version 7.9.3-pre1 |
| |
| Daniel (7 January 2002) |
| - I made the 'bool' typedef use an "unsigned char". It makes it the same on |
| all platforms, no matter what the platform thinks the default format for |
| char is. This was noticed since we made a silly comparison involving such a |
| bool variable, and only one compiler/platform combination (on Debian Linux) |
| complained about it (that happened to have its char unsigned by default). |
| |
| - Bug report #495290 identified a cookie parsing problem that was corrected. |
| When a Set-Cookie: line is received without a trailing semicolon, libcurl |
| didn't read the last "name=value" pair of the line, leading to confusions... |
| |
| - Sterling committed his updated DNS cache code. |
| |
| - I worked with Georg Horn and comments from Götz Babin-Ebell and switched |
| curl's socket operations completely over to non-blocking for the entire |
| operation (previously we used non-blocking only for the connection phase). |
| We had to do this to make the SSL connection phase timeout properly without |
| the use of signals. A little extra code to deal with this was added. |
| |
| - T. Bharath pointed out a slightly obscure cookie engine flaw. |
| |
| - Pete Su pointed out that libcurl didn't treat HTTP code 204 as it should. |
| 204-replies never provides a response-body. This resulted in bad persistant |
| behavior when 204 was received. |
| |
| Daniel (5 January 2002) |
| - SM updated the VC++ library Makefiles for the new source files. |
| |
| Daniel (4 January 2002) |
| - I discovered that we wrongly used inet_ntoa() (instead of inet_ntoa_r() in |
| two places in the source code). One happened with VERBOSE set on connects, |
| and the other when VERBOSE was on and krb4 over nat was used... I honestly |
| don't think anyone has suffered from these mistakes. |
| |
| - I replaced a lot of silly occurances of printf() to instead use the more |
| appropriate Curl_infof() or Curl_failf(). The krb4 and telnet code were |
| affected. |
| |
| - Philip Gladstone found a few more problems with 64-bit archs (the 64-bit |
| sparc on solaris 8). |
| |
| - After discussions on the libcurl list with Raoul Cridlig, I just made FTP |
| response lines get passed to the header callback if such a one is |
| registered. It'll make it possible for any application to get all the |
| responses an FTP server sends to libcurl. |
| |
| Daniel (3 January 2002) |
| - Sterling Hughes brought a few buckets of code. Now, libcurl will |
| automatically cache DNS lookups and re-use the previous results first if any |
| such is available. It greatly improves speed when doing many repeated |
| operations to the same host. |
| |
| - As the test case uses --include and then --head, I had to modify src/main.c |
| to deal with this situation slightly better than previously. When done, we |
| have 100% good tests again in the main branch. |
| |
| Daniel (2 January 2002) |
| - Made test case 25 run again in the multi-dev branch. But it seems that the |
| changes done on dec-20 made test case 104 cease to work (in both branches). |
| |
| - Philip Gladstone pointed out a few portability problems in the source code |
| that didn't compile on 64-bit sparcs using Sun's native compiler. |