blob: 0047ab41ace62d2673e0ca8a64b6f004449c3bde [file] [log] [blame]
_ _ ____ _
___| | | | _ \| |
/ __| | | | |_) | |
| (__| |_| | _ <| |___
\___|\___/|_| \_\_____|
Changelog
Version 7.66.0 (10 Sep 2019)
Daniel Stenberg (10 Sep 2019)
- RELEASE-NOTES: curl 7.66.0
- THANKS: from the 7.66.0 release
- curl: make sure the parallel transfers do them all
The logic could erroneously break the loop too early before all
transfers had been transferred.
Reported-by: Tom van der Woerdt
Fixes #4316
Closes #4317
- urlapi: one colon is enough for the strspn() input (typo)
- urlapi: verify the IPv6 numerical address
It needs to parse correctly. Otherwise it could be tricked into letting
through a-f using host names that libcurl would then resolve. Like
'[ab.be]'.
Reported-by: Thomas Vegas
Closes #4315
- [Clément Notin brought this change]
openssl: use SSL_CTX_set_<min|max>_proto_version() when available
OpenSSL 1.1.0 adds SSL_CTX_set_<min|max>_proto_version() that we now use
when available. Existing code is preserved for older versions of
OpenSSL.
Closes #4304
- [Clément Notin brought this change]
openssl: indent, re-organize and add comments
- [migueljcrum brought this change]
sspi: fix memory leaks
Closes #4299
- travis: disable ngtcp2 builds (again)
- Curl_fillreadbuffer: avoid double-free trailer buf on error
Reviewed-by: Jay Satiro
Reported-by: Thomas Vegas
Closes #4307
- tool_setopt: handle a libcurl build without netrc support
Reported-by: codesniffer13 on github
Fixes #4302
Closes #4305
- security:read_data fix bad realloc()
... that could end up a double-free
CVE-2019-5481
Bug: https://curl.haxx.se/docs/CVE-2019-5481.html
- [Thomas Vegas brought this change]
tftp: Alloc maximum blksize, and use default unless OACK is received
Fixes potential buffer overflow from 'recvfrom()', should the server
return an OACK without blksize.
Bug: https://curl.haxx.se/docs/CVE-2019-5482.html
CVE-2019-5482
- [Thomas Vegas brought this change]
tftp: return error when packet is too small for options
- KNOWN_BUGS/TODO: cleanup and remove outdated issues
- RELEASE-NOTES: synced
- netrc: free 'home' on error
Follow-up to f9c7ba9096ec2
Coverity CID 1453474
Closes #4291
- urldata: avoid 'generic', use dedicated pointers
For the 'proto' union within the connectdata struct.
Closes #4290
- cleanup: move functions out of url.c and make them static
Closes #4289
- smtp: check for and bail out on too short EHLO response
Otherwise, a three byte response would make the smtp_state_ehlo_resp()
function misbehave.
Credit to OSS-Fuzz
Bug: https://crbug.com/oss-fuzz/16918
Assisted-by: Max Dymond
Closes #4287
- smb: init *msg to NULL in smb_send_and_recv()
... it might otherwise return OK from this function leaving that pointer
uninitialized.
Bug: https://crbug.com/oss-fuzz/16907
Closes #4286
- ROADMAP: updated after recent user poll
In rough prio order
- THANKS: remove duplicate
- Curl_addr2string: take an addrlen argument too
This allows the function to figure out if a unix domain socket has a
file name or not associated with it! When a socket is created with
socketpair(), as done in the fuzzer testing, the path struct member is
uninitialized and must not be accessed.
Bug: https://crbug.com/oss-fuzz/16699
Closes #4283
- [Rolf Eike Beer brought this change]
CMake: remove needless newlines at end of gss variables
- [Rolf Eike Beer brought this change]
CI: remove duplicate configure flag for LGTM.com
- [Rolf Eike Beer brought this change]
CMake: use platform dependent name for dlopen() library
Closes #4279
- quiche: expire when poll returned data
... to make sure we continue draining the queue until empty
Closes #4281
- quiche: decrease available buffer size, don't assign it!
Found-by: Jeremy Lainé
- RELEASE-NOTES: synced
- [Kyohei Kadota brought this change]
curl: fix include conditions
- [Kyohei Kadota brought this change]
plan9: fix installation instructions
Closes #4276
- ngtcp2: on h3 stream close, call expire
... to trigger a new read to detect the stream close!
Closes #4275
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: build latest ngtcp2 and ngtcp2_crypto_openssl
Closes #4278
- ngtcp2: set flow control window to stream buffer size
Closes #4274
- [Christopher Head brought this change]
CURLOPT_HEADERFUNCTION.3: clarify
Closes #4273
- CURLINFO docs: mention that in redirects times are added
Suggested-by: Brandon Dong
Fixes #4250
Closes #4269
- travis: enable ngtcp2 builds again
Switched to the openssl-quic-draft-22 openssl branch.
Closes #4271
- HTTP3: switched openssl branch to use
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: Build with latest ngtcp2 and ngtcp2_crypto_openssl
Closes #4270
- http2: when marked for closure and wanted to close == OK
It could otherwise return an error even when closed correctly if GOAWAY
had been received previously.
Reported-by: Tom van der Woerdt
Fixes #4267
Closes #4268
- RELEASE-NOTES: synced
- build-openssl: fix build with Visual Studio 2019
Reviewed-by: Marcel Raad
Contributed-by: osabc on github
Fixes #4188
Closes #4266
Kamil Dudka (26 Aug 2019)
- vauth: return CURLE_AUTH_ERROR on gss_init_sec_context() failure
This is a follow-up to https://github.com/curl/curl/pull/3864 .
Closes #4224
Daniel Stenberg (26 Aug 2019)
- KNOWN_BUGS: USE_UNIX_SOCKETS on Windows
Closes #4040
- quiche: send the HTTP body correctly on callback uploads
Closes #4265
- travis: disable ngtcp2 builds (temporarily)
Just too many API changes right now
Closes #4264
- ngtcp2: add support for SSLKEYLOGFILE
Closes #4260
- ngtcp2: improve h3 response receiving
Closes #4259
- ngtcp2: use nghttp3_version()
- ngtcp2: sync with upstream API changes
Assisted-by: Tatsuhiro Tsujikawa
- [Kyle Abramowitz brought this change]
scp: fix directory name length used in memcpy
Fix read off end of array due to bad pointer math in getworkingpath for
SCP home directory case.
Closes #4258
- http: the 'closed' struct field is used by both ngh2 and ngh3
and remove 'header_recvbuf', not used for anything
Reported-by: Jeremy Lainé
Closes #4257
- ngtcp2: accept upload via callback
Closes #4256
- defines: avoid underscore-prefixed defines
Double-underscored or underscore plus uppercase letter at least.
... as they're claimed to be reserved.
Reported-by: patnyb on github
Fixes #4254
Closes #4255
- travis: add a build using ngtcp2 + nghttp3 (and a patched OpenSSL)
Runs no tests
Closes #4253
- travis: bump to using nghttp2 version 1.39.2
Closes #4252
- [Gisle Vanem brought this change]
docs/examples/curlx: fix errors
Initialise 'mimetype' and require the -p12 arg.
Closes #4248
- cleanup: remove DOT_CHAR completely
Follow-up to f9c7ba9096ec
The use of DOT_CHAR for ".ssh" was probably a mistake and is removed
now.
Pointed-out-by: Gisle Vanem
Bug: https://github.com/curl/curl/pull/4230#issuecomment-522960638
Closes #4247
- spnego_sspi: add typecast to fix build warning
Reported in build "Win32 target on Debian Stretch (64-bit) -
i686-w64-mingw32 - gcc-20170516"
Closes #4245
- openssl: build warning free with boringssl
Closes #4244
- curl: make --libcurl use CURL_HTTP_VERSION_3
Closes #4243
- ngtcp2: make postfields-set posts work
Closes #4242
- http: remove chunked-encoding and expect header use for HTTP/3
- [Alessandro Ghedini brought this change]
configure: use pkg-config to detect quiche
This removes the need to hard-code the quiche target path in
configure.ac.
This depends on https://github.com/cloudflare/quiche/pull/128
Closes #4237
- CURLOPT_SSL_VERIFYHOST: treat the value 1 as 2
For a long time (since 7.28.1) we've returned error when setting the
value to 1 to make applications notice that we stopped supported the old
behavior for 1. Starting now, we treat 1 and 2 exactly the same.
Closes #4241
- curl: use .curlrc (with a dot) on Windows as well
Fall-back to _curlrc if the dot-version is missing.
Co-Authored-By: Steve Holme
Closes #4230
- netrc: make the code try ".netrc" on Windows as well
... but fall back and try "_netrc" too if the dot version didn't work.
Co-Authored-By: Steve Holme
- ngtcp2: use ngtcp2_version() to get the run-time version
... which of course doesn't have to be the same used at build-time.
Function just recently merged in ngtcp2.
- ngtcp2: move the h3 initing to immediately after the rx key
To fix a segfault and to better deal with 0-RTT
Assisted-by: Tatsuhiro Tsujikawa
- [Alessandro Ghedini brought this change]
quiche: register debug callback once and earlier
The quiche debug callback is global and can only be initialized once, so
make sure we don't do it multiple times (e.g. if multiple requests are
executed).
In addition this initializes the callback before the connection is
created, so we get logs for the handshake as well.
Closes #4236
- ssh: add a generic Curl_ssh_version function for SSH backends
Closes #4235
- base64: check for SSH, not specific SSH backends
- vssh: move ssh init/cleanup functions into backend code
- vssh: create directory for SSH backend code
- TODO/ROADMAP: remove "refuse downgrade redirects" and HTTP/3
HTTP3 is now already in full progress
Downgrade redirects can be achived almost exactly like that by setting
CURLOPT_REDIR_PROTOCOLS.
- RELEASE-NOTES: synced
- travis: add a quiche build
Closes #4207
- http: fix use of credentials from URL when using HTTP proxy
When a username and password are provided in the URL, they were wrongly
removed from the stored URL so that subsequent uses of the same URL
wouldn't find the crendentials. This made doing HTTP auth with multiple
connections (like Digest) mishave.
Regression from 46e164069d1a5230 (7.62.0)
Test case 335 added to verify.
Reported-by: Mike Crowe
Fixes #4228
Closes #4229
- [Mike Crowe brought this change]
tests: Replace outdated test case numbering documentation
Tests are no longer grouped by numeric range[1]. Let's stop saying that
and provide some alternative advice for numbering tests.
[1] https://curl.haxx.se/mail/lib-2019-08/0043.html
Closes #4227
- travis: reduce number of torture tests in 'coverage'
... to make it complete in time. This cut seems not almost not affect
the coverage percentage and yet completes within 35 minutes on travis
where the previous runs recently always timed out after 50.
Closes #4223
- [Igor Makarov brought this change]
configure: use -lquiche to link to quiche
Closes #4226
- ngtcp2: provide the callbacks as a static struct
... instead of having them in quicsocket
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: add missing nghttp3_conn_add_write_offset call
Closes #4225
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: deal with stream close
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: Consume QUIC STREAM data properly
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: don't reinitialize SSL on Retry
- multi: getsock improvements for QUIC connecting
- connect: connections are persistent by default for HTTP/3
- quiche: happy eyeballs
Closes #4220
- ngtcp2: do QUIC connections happy-eyeballs friendly
- curl_version: bump string buffer size to 250
With HTTP/3 libs and plenty TLS libs, I manged to hit the limit (which
causes a truncated output).
- CURLOPT_ALTSVC.3: use a "" file name to not load from a file
Jay Satiro (14 Aug 2019)
- vauth: Use CURLE_AUTH_ERROR for auth function errors
- Add new error code CURLE_AUTH_ERROR.
Prior to this change auth function errors were signaled by
CURLE_OUT_OF_MEMORY and CURLE_RECV_ERROR, and neither one was
technically correct.
Ref: https://github.com/curl/curl/pull/3848
Co-authored-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/3864
Daniel Stenberg (13 Aug 2019)
- curl_version_info: make the quic_version a const
Follow-up from 1a2df1518ad8653f
Closes #4222
- examples: add http3.c, altsvc.c and http3-present.c
Closes #4221
Peter Wu (13 Aug 2019)
- nss: use TLSv1.3 as default if supported
SSL_VersionRangeGetDefault returns (TLSv1.0, TLSv1.2) as supported
range in NSS 3.45. It looks like the intention is to raise the minimum
version rather than lowering the maximum, so adjust accordingly. Note
that the caller (nss_setup_connect) initializes the version range to
(TLSv1.0, TLSv1.3), so there is no need to check for >= TLSv1.0 again.
Closes #4187
Reviewed-by: Daniel Stenberg
Reviewed-by: Kamil Dudka
Daniel Stenberg (13 Aug 2019)
- quic.h: remove unused proto
- curl_version_info.3: mentioned ALTSVC and HTTP3
... and sorted the list alphabetically
- lib/quic.c: unused - removed
- CURLOPT_ALTSVC_CTRL.3: remove CURLALTSVC_ALTUSED
Follow-up to 98c3f148 that removed it from the header file
- [Junho Choi brought this change]
docs/HTTP3: simplify quiche build instruction
Use --recursive to get boringssl in one line
Closes #4219
- altsvc: make it use h3-22 with ngtcp2 as well
- ngtcp2: initial h3 request work
Closes #4217
- curl_version_info: offer quic (and h3) library info
Closes #4216
- HTTP3: use ngtcp2's draft-22 branch
- RELEASE-NOTES: synced
- CURLOPT_READFUNCTION.3: provide inline example
... instead of mentioning one in another place
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: send HTTP/3 request with nghttp3
This commit makes sending HTTP/3 request with nghttp3 work. It
minimally receives HTTP response and calls nghttp3 callbacks, but no
processing is made at the moment.
Closes #4215
- nghttp3: initial h3 template code added
- nghttp3: required when ngtcp2 is used for QUIC
- checked for by configure
- updated docs/HTTP3.md
- shown in the version string
Closes #4210
- [Eric Wong brought this change]
asyn-thread: issue CURL_POLL_REMOVE before closing socket
This avoids EBADF errors from EPOLL_CTL_DEL operations in the
ephiperfifo.c example. EBADF is dangerous in multi-threaded
applications where I rely on epoll_ctl to operate on the same
epoll description from different threads.
Follow-up to eb9a604f8d7db8
Bug: https://curl.haxx.se/mail/lib-2019-08/0026.html
Closes #4211
- [Carlo Marcelo Arenas Belón brought this change]
configure: avoid undefined check_for_ca_bundle
instead of using a "greater than 0" test, check for variable being
set, as it is always set to 1, and could be left unset if non of
OPENSSL MBEDTLS GNUTLS WOLFSSL is being configured for.
Closes #4213
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: Send ALPN h3-22
Closes #4212
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: use ngtcp2_settings_default and specify initial_ts
- curl_global_init_mem.3: mention it was added in 7.12.0
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: make the QUIC handshake work
Closes #4209
- [Alex Mayorga brought this change]
HTTP3.md: Update quiche build instructions
Added cloning for quiche and BoringSSL and modified the build
instructions so they work on a clean folder.
Closes #4208
- CURLOPT_H3: removed
There's no use for this anymore and it was never in a release.
Closes #4206
- http3: make connection reuse work
Closes #4204
- quiche: add SSLKEYLOGFILE support
- cleanup: s/curl_debug/curl_dbg_debug in comments and docs
Leftovers from the function rename back in 76b63489495
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/commit/f3e0f071b14fcb46a453f69bdf4e062bcaacf362#com
mitcomment-34601751
Closes #4203
- RELEASE-NOTES: synced
- alt-svc: add protocol version selection masking
So that users can mask in/out specific HTTP versions when Alt-Svc is
used.
- Removed "h2c" and updated test case accordingly
- Changed how the altsvc struct is laid out
- Added ifdefs to make the unittest run even in a quiche-tree
Closes #4201
- http3: fix the HTTP/3 in the request, make alt-svc set right versions
Closes #4200
- alt-svc: send Alt-Used: in redirected requests
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes #4199
- CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directly
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes #4197
- docs/ALTSVC: remove what works and the experimental explanation
Also, put the TODO items at the bottom.
Closes #4198
- docs/EXPERIMENTAL: explain what it means and what's experimental now
- curl: make use of CURLINFO_RETRY_AFTER when retrying
If a Retry-After: header was used in the response, that value overrides
other retry timing options.
Fixes #3794
Closes #4195
- curl: use CURLINFO_PROTOCOL to check for HTTP(s)
... instead of CURLINFO_EFFECTIVE_URL to avoid string operations.
- CURLINFO_RETRY_AFTER: parse the Retry-After header value
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
- docs/ALTSVC.md: first basic file format description
- curl: have -w's 'http_version' show '3' for HTTP/3
Closes #4196
- curl.h: add CURL_HTTP_VERSION_3 to the version enum
It can't be set for CURLOPT_HTTP_VERSION, but it can be extracted with
CURLINFO_HTTP_VERSION.
- quiche: make use of the connection timeout API properly
- quiche: make POSTFIELDS posts work
- quiche: improved error handling and memory cleanups
- quiche: flush egress in h3_stream_recv() too
- RELEASE-NOTES: synced
Jay Satiro (6 Aug 2019)
- [Patrick Monnerat brought this change]
os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid().
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- tests: Fix the line endings for the SASL alt-auth tests
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to grandparent commit which added the tests.
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- [Steve Holme brought this change]
examples: Added SASL PLAIN authorisation identity (authzid) examples
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- [Steve Holme brought this change]
curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- [Steve Holme brought this change]
sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes #3653
Closes #3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
Daniel Stenberg (6 Aug 2019)
- docs/HTTP3: refreshed as it is now in master and HTTP/3 can be tested
- [Yiming Jing brought this change]
mesalink: implement client authentication
Closes #4184
- curl_multi_poll: a sister to curl_multi_wait() that waits more
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes #4163
- quiche:h3_stream_recv return 0 at end of stream
... and remove some verbose messages we don't need. Made transfers from
facebook.com work better.
- altsvc: make quiche use h3-22 now
- quiche: show the actual version number
- quiche: first working HTTP/3 request
- enable debug log
- fix use of quiche API
- use download buffer
- separate header/body
Closes #4193
- http09: disable HTTP/0.9 by default in both tool and library
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes #4191
- quiche: initial h3 request send/receive
- lib/Makefile.am: make checksrc run in vquic too
- altsvc: fix removal of expired cache entry
Closes #4192
- RELEASE-NOTES: synced
Steve Holme (4 Aug 2019)
- md4: Use our own MD4 implementation when no crypto libraries are available
Closes #3780
- md4: No need to include Curl_md4.h for each TLS library
- md4: No need for the NTLM code to call Curl_md4it() for each TLS library
As the NTLM code no longer calls any of TLS libraries' specific MD4
functions, there is no need to call this function for each #ifdef.
- md4: Move the mbed TLS MD4 implementation out of the NTLM code
- md4: Move the WinCrypt implementation out of the NTLM code
- md4: Move the SecureTransport implementation out of the NTLM code
- md4: Use the Curl_md4it() function for OpenSSL based NTLM
- md4: Move the GNU TLS gcrypt MD4 implementation out of the NTLM code
- md4: Move the GNU TLS Nettle MD4 implementation out of the NTLM code
Jay Satiro (4 Aug 2019)
- OS400: Add CURLOPT_H3 symbols
Follow-up to 3af0e76 which added experimental H3 support.
Closes https://github.com/curl/curl/pull/4185
Daniel Stenberg (3 Aug 2019)
- url: make use of new HTTP version if alt-svc has one
- url: set conn->transport to default TCP at init time
- altsvc: with quiche, use the quiche h3 alpn string
Closes #4183
- alt-svc: more liberal ALPN name parsing
Allow pretty much anything to be part of the ALPN identifier. In
particular minus, which is used for "h3-20" (in-progress HTTP/3
versions) etc.
Updated test 356.
Closes #4182
- quiche: use the proper HTTP/3 ALPN
- quiche: add failf() calls for two error cases
To aid debugging
Closes #4181
- mailmap: added Kyohei Kadota
Kamil Dudka (1 Aug 2019)
- http_negotiate: improve handling of gss_init_sec_context() failures
If HTTPAUTH_GSSNEGOTIATE was used for a POST request and
gss_init_sec_context() failed, the POST request was sent
with empty body. This commit also restores the original
behavior of `curl --fail --negotiate`, which was changed
by commit 6c6035532383e300c712e4c1cd9fdd749ed5cf59.
Add regression tests 2077 and 2078 to cover this.
Fixes #3992
Closes #4171
Daniel Stenberg (1 Aug 2019)
- mailmap: added 4 more names
Evgeny Grin, Peter Pih, Anton Malov and Marquis de Muesli
- mailmap: add Giorgos Oikonomou
- src/makefile: fix uncompressed hugehelp.c generation
Regression from 5cf5d57ab9 (7.64.1)
Fixed-by: Lance Ware
Fixes #4176
Closes #4177
- appveyor: pass on -k to make
- timediff: make it 64 bit (if possible) even with 32 bit time_t
... to make it hold microseconds too.
Fixes #4165
Closes #4168
- ROADMAP: parallel transfers are merged now
- getenv: support up to 4K environment variable contents on windows
Reported-by: Michal Čaplygin
Fixes #4174
Closes #4175
- [Kyohei Kadota brought this change]
plan9: add support for running on Plan 9
Closes #3701
- [Kyohei Kadota brought this change]
ntlm: explicit type casting
- [Justin brought this change]
curl.h: fix outdated comment
Closes #4167
- curl: remove outdated comment
Turned bad with commit b8894085000
Reported-by: niallor on github
Fixes #4172
Closes #4173
- cleanup: remove the 'numsocks' argument used in many places
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes #4169
- readwrite_data: repair setting the TIMER_STARTTRANSFER stamp
Regression, broken in commit 65eb65fde64bd5f (curl 7.64.1)
Reported-by: Jonathan Cardoso Machado
Assisted-by: Jay Satiro
Fixes #4136
Closes #4162
- mailmap: Amit Katyal
- asyn-thread: removed unused variable
Follow-up to eb9a604f. Mistake caused by me when I edited the commit
before push...
- RELEASE-NOTES: synced
- [Amit Katyal brought this change]
asyn-thread: create a socketpair to wait on
Closes #4157
- curl: cap the maximum allowed values for retry time arguments
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes #4166
- progress: reset download/uploaded counter
... to make CURLOPT_MAX_RECV_SPEED_LARGE and
CURLOPT_MAX_SEND_SPEED_LARGE work correctly on subsequent transfers that
reuse the same handle.
Fixed-by: Ironbars13 on github
Fixes #4084
Closes #4161
- http2_recv: trigger another read when the last data is returned
... so that end-of-stream is detected properly.
Reported-by: Tom van der Woerdt
Fixes #4043
Closes #4160
- curl: avoid uncessary libcurl timeouts (in parallel mode)
When curl_multi_wait() returns OK without file descriptors to wait for,
it might already have done a long timeout.
Closes #4159
- [Balazs Kovacsics brought this change]
HTTP: use chunked Transfer-Encoding for HTTP_POST if size unknown
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes #4138
Jay Satiro (29 Jul 2019)
- [Daniel Stenberg brought this change]
winbuild: add vquic to list of build directories
This fixes the winbuild build method which broke several days ago
when experimental quic support was added in 3af0e76.
Reported-by: Michael Lee
Fixes https://github.com/curl/curl/issues/4158
- easy: resize receive buffer on easy handle reset
- In curl_easy_reset attempt to resize the receive buffer to its default
size. If realloc fails then continue using the previous size.
Prior to this change curl_easy_reset did not properly handle resetting
the receive buffer (data->state.buffer). It reset the variable holding
its size (data->set.buffer_size) to the default size (READBUFFER_SIZE)
but then did not actually resize the buffer. If a user resized the
buffer by using CURLOPT_BUFFERSIZE to set the size smaller than the
default, later called curl_easy_reset and attempted to reuse the handle
then a heap overflow would very likely occur during that handle's next
transfer.
Reported-by: Felix Hädicke
Fixes https://github.com/curl/curl/issues/4143
Closes https://github.com/curl/curl/pull/4145
- [Brad Spencer brought this change]
examples: Avoid reserved names in hiperfifo examples
- Trade in __attribute__((unused)) for the classic (void)x to silence
unused symbols.
Because the classic way is not gcc specific. Also because the prior
method mapped to symbol _Unused, which starts with _ and a capital
letter which is reserved.
Assisted-by: The Infinnovation team
Bug: https://github.com/curl/curl/issues/4120#issuecomment-512542108
Closes https://github.com/curl/curl/pull/4153
Daniel Stenberg (25 Jul 2019)
- RELEASE-NOTES: synced
- [Felix Hädicke brought this change]
ssh-libssh: do not specify O_APPEND when not in append mode
Specifying O_APPEND in conjunction with O_TRUNC and O_CREAT does not
make much sense. And this combination of flags is not accepted by all
SFTP servers (at least not Apache SSHD).
Fixes #4147
Closes #4148
- [Gergely Nagy brought this change]
multi: call detach_connection before Curl_disconnect
Curl_disconnect bails out if conn->easyq is not empty, detach_connection
needs to be called first to remove the current easy from the queue.
Fixes #4144
Closes #4151
Jay Satiro (23 Jul 2019)
- tool_operate: fix implicit call to easysrc_cleanup
easysrc_cleanup is only defined when CURL_DISABLE_LIBCURL_OPTION is not
defined, and prior to this change would be called regardless.
Bug: https://github.com/curl/curl/pull/3804#issuecomment-513922637
Reported-by: Marcel Raad
Closes https://github.com/curl/curl/pull/4142
Daniel Stenberg (22 Jul 2019)
- curl:create_transfers check return code from curl_easy_setopt
From commit b8894085
Pointed out by Coverity CID 1451703
Closes #4134
- HTTP3: initial (experimental) support
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes #3500
- curl: remove dead code
The loop never loops (since b889408500), pointed out by Coverity (CID
1451702)
Closes #4133
- docs/PARALLEL-TRANSFERS: correct the version number
- docs/PARALLEL-TRANSFERS: added
- curl: support parallel transfers
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes #3804
- docs/MANUAL.md: converted to markdown from plain text
... will make it render as a nicer web page.
Closes #4131
- curl_version_info: provide nghttp2 details
Introducing CURLVERSION_SIXTH with nghttp2 info.
Closes #4121
- bump: start working on 7.66.0
- source: remove names from source comments
Several reasons:
- we can't add everyone who's helping out so its unfair to just a few
selected ones.
- we already list all helpers in THANKS and in RELEASE-NOTES for each
release
- we don't want to give the impression that some parts of the code is
"owned" or "controlled" by specific persons
Assisted-by: Daniel Gustafsson
Closes #4129
Version 7.65.3 (19 Jul 2019)
Daniel Stenberg (19 Jul 2019)
- RELEASE-NOTES: 7.65.3
- THANKS: 7.65.3 status
- progress: make the progress meter appear again
Fix regression caused by 21080e1
Reported-by: Chih-Hsuan Yen
Fixes #4122
Closes #4124
- version: bump to 7.65.3
- RELEASE-NOTES: Contributors or now 1990
Version 7.65.2 (17 Jul 2019)
Daniel Stenberg (17 Jul 2019)
- RELEASE-NOTES: 7.65.2
- THANKS: add contributors from 7.65.2
Jay Satiro (17 Jul 2019)
- [aasivov brought this change]
cmake: Fix finding Brotli on case-sensitive file systems
- Find package "Brotli" instead of "BROTLI" since the former is the
casing used for CMake/FindBrotli.cmake, and otherwise find_package
may fail on a case-sensitive file system.
Fixes https://github.com/curl/curl/issues/4117
- CURLOPT_RANGE.3: Caution against using it for HTTP PUT
AFAICT CURLOPT_RANGE does not support ranged HTTP PUT uploads so I've
cautioned against using it for that purpose and included a workaround.
Bug: https://curl.haxx.se/mail/lib-2019-04/0075.html
Reported-by: Christopher Head
Closes https://github.com/curl/curl/issues/3814
- [Stefano Simonelli brought this change]
CURLOPT_SEEKDATA.3: fix variable name
Closes https://github.com/curl/curl/pull/4118
- [Giorgos Oikonomou brought this change]
CIPHERS.md: Explain Schannel error SEC_E_ALGORITHM_MISMATCH
If the SSL backend is Schannel and the user specifies an Schannel CALG_
that is not supported by the protocol or the server then curl returns
CURLE_SSL_CONNECT_ERROR (35) SEC_E_ALGORITHM_MISMATCH.
Fixes https://github.com/curl/curl/issues/3389
Closes https://github.com/curl/curl/pull/4106
- [Daniel Gustafsson brought this change]
nss: inspect returnvalue of token check
PK11_IsPresent() checks for the token for the given slot is available,
and sets needlogin flags for the PK11_Authenticate() call. Should it
return false, we should however treat it as an error and bail out.
Closes https://github.com/curl/curl/pull/4110
- docs: Explain behavior change in --tlsv1. options since 7.54
Since 7.54 --tlsv1. options use the specified version or later, however
older versions of curl documented it as using just the specified version
which may or may not have happened depending on the TLS library.
Document this discrepancy to allay confusion for users familiar with the
old documentation that expect just the specified version.
Fixes https://github.com/curl/curl/issues/4097
Closes https://github.com/curl/curl/pull/4119
- libcurl: Restrict redirect schemes (follow-up)
- Allow FTPS on redirect.
- Update default allowed redirect protocols in documentation.
Follow-up to 6080ea0.
Ref: https://github.com/curl/curl/pull/4094
Closes https://github.com/curl/curl/pull/4115
Daniel Stenberg (16 Jul 2019)
- test1173: make it also check all libcurl option man pages
... and adjust those that cause errors
Closes #4116
- curl: only accept COLUMNS less than 10000
... as larger values would rather indicate something silly (and could
potentially cause buffer problems).
Reported-by: pendrek at hackerone
Closes #4114
- dist: add manpage-syntax.pl
follow-up to 7fb66c403
- test1173: detect some basic man page format mistakes
Triggered by PR #4111
Closes #4113
Jay Satiro (15 Jul 2019)
- [Bjarni Ingi Gislason brought this change]
docs: Fix missing lines caused by undefined macros
- Escape apostrophes at line start.
Some lines begin with a "'" (apostrophe, single quote), which is then
interpreted as a control character in *roff.
Such lines are interpreted as being a call to a macro, and if
undefined, the lines are removed from the output.
Bug: https://bugs.debian.org/926352
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Submitted-by: Alessandro Ghedini
Closes https://github.com/curl/curl/pull/4111
Daniel Stenberg (14 Jul 2019)
- libcurl-security.3: update to new CURLOPT_REDIR_PROTOCOLS defaults
follow-up to 6080ea098
- [Linos Giannopoulos brought this change]
libcurl: Add testcase for gopher redirects
The testcase ensures that redirects to CURLPROTO_GOPHER won't be
allowed, by default, in the future. Also, curl is being used
for convenience while keeping the testcases DRY.
The expected error code is CURLE_UNSUPPORTED_PROTOCOL when the client is
redirected to CURLPROTO_GOPHER
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
- [Linos Giannopoulos brought this change]
libcurl: Restrict redirect schemes
All protocols except for CURLPROTO_FILE/CURLPROTO_SMB and their TLS
counterpart were allowed for redirect. This vastly broadens the
exploitation surface in case of a vulnerability such as SSRF [1], where
libcurl-based clients are forced to make requests to arbitrary hosts.
For instance, CURLPROTO_GOPHER can be used to smuggle any TCP-based
protocol by URL-encoding a payload in the URI. Gopher will open a TCP
connection and send the payload.
Only HTTP/HTTPS and FTP are allowed. All other protocols have to be
explicitly enabled for redirects through CURLOPT_REDIR_PROTOCOLS.
[1]: https://www.acunetix.com/blog/articles/server-side-request-forgery-vulnerability/
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
Closes #4094
- [Zenju brought this change]
openssl: define HAVE_SSL_GET_SHUTDOWN based on version number
Closes #4100
- [Peter Simonyi brought this change]
http: allow overriding timecond with custom header
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes #4103
Closes #4109
Jay Satiro (11 Jul 2019)
- [Juergen Hoetzel brought this change]
smb: Use the correct error code for access denied on file open
- Return CURLE_REMOTE_ACCESS_DENIED for SMB access denied on file open.
Prior to this change CURLE_REMOTE_FILE_NOT_FOUND was returned instead.
Closes https://github.com/curl/curl/pull/4095
- [Daniel Gustafsson brought this change]
DEPRECATE: fixup versions and spelling
Correctly set the July 17 version to 7.65.2, and update spelling to
be consistent. Also fix a typo.
Closes https://github.com/curl/curl/pull/4107
- [Gisle Vanem brought this change]
system_win32: fix clang warning
- Declare variable in header as extern.
Bug: https://github.com/curl/curl/commit/48b9ea4#commitcomment-34084597
Daniel Gustafsson (10 Jul 2019)
- headers: Remove no longer exported functions
There were a leftover few prototypes of Curl_ functions that we used to
export but no longer do, this removes those prototypes and cleans up any
comments still referring to them.
Curl_write32_le(), Curl_strcpy_url(), Curl_strlen_url(), Curl_up_free()
Curl_concat_url(), Curl_detach_connnection(), Curl_http_setup_conn()
were made static in 05b100aee247bb9bec8e9a1b0166496aa4248d1c.
Curl_http_perhapsrewind() made static in 574aecee208f79d391f10d57520b3.
For the remainder, I didn't trawl the Git logs hard enough to capture
their exact time of deletion, but they were all gone: Curl_splayprint(),
Curl_http2_send_request(), Curl_global_host_cache_dtor(),
Curl_scan_cache_used(), Curl_hostcache_destroy(), Curl_second_connect(),
Curl_http_auth_stage() and Curl_close_connections().
Closes #4096
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- CMake: fix typos and spelling
- [Kyle Edwards brought this change]
CMake: Convert errant elseif() to else()
CMake interprets an elseif() with no arguments as elseif(FALSE),
resulting in the elseif() block not being executed. That is not what
was intended here. Change the empty elseif() to an else() as it was
intended.
Closes #4101
Reported-by: Artalus <artalus-mail@yandex.ru>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- buildconf: fix header filename
The header file inclusion had a typo, it should be .h and not .hd.
Fix by renaming.
Fixes #4102
Reported-by: AceCrow on Github
- [Jan Chren brought this change]
configure: fix --disable-code-coverage
This fixes the case when --disable-code-coverage supplied to ./configure
would result in coverage="yes" being set.
Closes #4099
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- cleanup: fix typo in comment
- RELEASE-NOTES: synced
Jay Satiro (6 Jul 2019)
- [Daniel Gustafsson brought this change]
nss: support using libnss on macOS
The file suffix for dynamically loadable objects on macOS is .dylib,
which need to be added for the module definitions in order to get the
NSS TLS backend to work properly on macOS.
Closes https://github.com/curl/curl/pull/4046
- [Daniel Gustafsson brought this change]
nss: don't set unused parameter
The value of the maxPTDs parameter to PR_Init() has since at least
NSPR 2.1, which was released sometime in 1998, been marked ignored
as is accordingly not used in the initialization code. Setting it
to a value when calling PR_Init() is thus benign, but indicates an
intent which may be misleading. Reset the value to zero to improve
clarity.
Closes https://github.com/curl/curl/pull/4054
- [Daniel Gustafsson brought this change]
nss: only cache valid CRL entries
Change the logic around such that we only keep CRLs that NSS actually
ended up caching around for later deletion. If CERT_CacheCRL() fails
then there is little point in delaying the freeing of the CRL as it
is not used.
Closes https://github.com/curl/curl/pull/4053
- [Gergely Nagy brought this change]
lib: Use UTF-8 encoding in comments
Some editors and IDEs assume that source files use UTF-8 file encodings.
It also fixes the build with MSVC when /utf-8 command line option is
used (this option is mandatory for some other open-source projects, this
is useful when using the same options is desired for building all
libraries of a project).
Closes https://github.com/curl/curl/pull/4087
- [Caleb Raitto brought this change]
CURLOPT_HEADEROPT.3: Fix example
Fix an issue where example builds a curl_slist, but fails to actually
use it, or free it.
Closes https://github.com/curl/curl/pull/4090
- [Shankar Jadhavar brought this change]
winbuild: Change Makefile to honor ENABLE_OPENSSL_AUTO_LOAD_CONFIG
- Made changes so that ENABLE_OPENSSL_AUTO_LOAD_CONFIG will be honored.
- Also removed some ^M chars from file.
Prior to this change while building on Windows platform even if we pass
the ENABLE_OPENSSL_AUTO_LOAD_CONFIG option with value as "no" it does
not set the CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG flag.
Closes https://github.com/curl/curl/pull/4086
Daniel Stenberg (4 Jul 2019)
- doh-url.d: added in 7.62.0
Jay Satiro (30 Jun 2019)
- docs: Fix links to OpenSSL docs
OpenSSL changed their manual locations and does not redirect to the new
locations.
Bug: https://curl.haxx.se/mail/lib-2019-06/0056.html
Reported-by: Daniel Stenberg
Daniel Stenberg (26 Jun 2019)
- [Gaël PORTAY brought this change]
curl_multi_wait.3: escape backslash in example
The backslash in the character Line Feed must be escaped.
The current man-page outputs the code as following:
fprintf(stderr, "curl_multi failed, code %d.0, mc);
The commit fixes it as follow:
fprintf(stderr, "curl_multi failed, code %d\n", mc);
Closes #4079
- openssl: disable engine if OPENSSL_NO_UI_CONSOLE is defined
... since that needs UI_OpenSSL() which isn't provided when OpenSSL is
built with OPENSSL_NO_UI_CONSOLE which happens when OpenSSL is built for
UWP (with "VC-WIN32-UWP").
Reported-by: Vasily Lobaskin
Fixes #4073
Closes #4077
- test1521: adapt to SLISTPOINT
The header now has the slist-using options marked as SLISTPOINT so this
makes sure test 1521 understands that.
Follow-up to ae99b4de1c443ae989
Closes #4074
- win32: make DLL loading a no-op for UWP
Reported-by: Michael Brehm
Fixes #4060
Closes #4072
- [1ocalhost brought this change]
configure: fix typo '--disable-http-uath'
Closes #4076
- [Niklas Hambüchen brought this change]
docs: fix string suggesting HTTP/2 is not the default
Commit 25fd1057c9c86e3 made HTTP2 the default, and further down in the
man page that new default is mentioned, but the section at the top
contradicted it until now.
Also remove claim that setting the HTTP version is not sensible.
Closes #4075
- RELEASE-NOTES: synced
- [Stephan Szabo brought this change]
tests: update fixed IP for hostip/clientip split
These tests give differences for me on linux when using a hostip
pointing to the external ip address for the local machine.
Closes #4070
Daniel Gustafsson (24 Jun 2019)
- http: clarify header buffer size calculation
The header buffer size calculation can from static analysis seem to
overlow as it performs an addition between two size_t variables and
stores the result in a size_t variable. Overflow is however guarded
against elsewhere since the input to the addition is regulated by
the maximum read buffer size. Clarify this with a comment since the
question was asked.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (24 Jun 2019)
- KNOWN_BUGS: Don't clear digest for single realm
Closes #3267
- KNOWN_BUGS: Schannel disable CURLOPT_SSL_VERIFYPEER and verify hostname
Closes #3284
- http2: call done_sending on end of upload
To make sure a HTTP/2 stream registers the end of stream.
Bug #4043 made me find this problem but this fix doesn't correct the
reported issue.
Closes #4068
- [James Brown brought this change]
c-ares: honor port numbers in CURLOPT_DNS_SERVERS
By using ares_set_servers_ports_csv on new enough c-ares.
Fixes #4066
Closes #4067
Daniel Gustafsson (24 Jun 2019)
- CURLMOPT_SOCKETFUNCTION.3: fix typo
Daniel Stenberg (24 Jun 2019)
- [Koen Dergent brought this change]
curl: skip CURLOPT_PROXY_CAPATH for disabled-proxy builds
Closes #4061
- test153: fix content-length to avoid occasional hang
Closes #4065
- RELEASE-NOTES: synced
- multi: enable multiplexing by default (again)
It was originally made default in d7c4213bd0c (7.62.0) but mistakenly
reverted in commit 2f44e94efb3d (7.65.0). Now enabled again.
Closes #4051
- typecheck: add 3 missing strings and a callback data pointer
Closes #4050
- tests: add disable-scan.pl to dist
follow-up from 29177f422a5
Closes #4059
- http2: don't call stream-close on already closed streams
Closes #4055
Marcel Raad (20 Jun 2019)
- travis: enable alt-svc for coverage build
Closes
- travis: enable libssh2 for coverage build
It was enabled by default before commit c92d2e14cfb.
Disable torture tests 600 and 601 because of
https://github.com/curl/curl/issues/1678.
Closes
- travis: disable threaded resolver for coverage build
This enables more tests.
Closes
- travis: enable brotli for all xenial jobs
There's no need for a separate job, and no need to build it from source
with Xenial.
Closes
- travis: enable warnings-as-errors for coverage build
Closes
GitHub (20 Jun 2019)
- [Gisle Vanem brought this change]
system_win32: fix typo
Daniel Stenberg (20 Jun 2019)
- typecheck: CURLOPT_CONNECT_TO takes an slist too
Additionally, add an alias in curl.h for slist-using options so that
we can grep/parse those out at will.
Closes #4042
- [Stephan Szabo brought this change]
tests: support non-localhost HOSTIP for dict/smb servers
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for
binding the server which when we were running the tests with a separate
HOSTIP and CLIENTIP had failures verifying the server from the device we
were testing.
This changes them to take the address from runtests.py and default to
localhost/127.0.0.1 if none is given.
Closes #4048
- test1523: basic test of CURLOPT_LOW_SPEED_LIMIT
- configure: --disable-progress-meter
Builds libcurl without support for the built-in progress meter.
Closes #4023
- curl: improved skip-setopt-options when built with disabled features
Reduces #ifdefs in src/tool_operate.c
Follow-up from 4e86f2fc4e6
Closes #3936
Steve Holme (18 Jun 2019)
- netrc: Return the correct error code when out of memory
Introduced in 763c5178.
Closes #4036
Daniel Stenberg (18 Jun 2019)
- config-os400: add getpeername and getsockname defines
Reported-by: jonrumsey on github
Fixes #4037
Closes #4039
- runtests: keep logfiles around by default
Make '-k' a no-op. The singletest function now clears the log directory
BEFORE each individual test and not after, which makes it possible to
always keep the logfiles around after a test has been run. No need to
specify -k anymore. Keeping the option parsing around to work with users
of old habits.
Some tests also didn't work properly when -k was used (since the old
logs would be kep when a new test starts) which this change also fixes.
Closes #4035
- [Gergely Nagy brought this change]
openssl: fix pubkey/signature algorithm detection in certinfo
Certinfo gives the same result for all OpenSSL versions.
Also made printing RSA pubkeys consistent with older versions.
Reported-by: Michael Wallner
Fixes #3706
Closes #4030
- conn_maxage: move the check to prune_dead_connections()
... and avoid the locking issue.
Reported-by: Kunal Ekawde
Fixes #4029
Closes #4032
- tests: have runtests figure out disabled features
... so that runtests can skip individual test cases that test features
that are explicitly disabled in this build. This new logic is intended
for disabled features that aren't otherwise easily visible through the
curl_version_info() or other API calls.
tests/server/disabled is a newly built executable that will output a
list of disabled features. Outputs nothing for a default build.
Closes #3950
- test188/189: fix Content-Length
This cures the flaky test results
Closes #4034
- [Thomas Gamper brought this change]
winbuild: use WITH_PREFIX if given
Closes #4031
Daniel Gustafsson (17 Jun 2019)
- openssl: remove outdated comment
OpenSSL used to call exit(1) on syntax errors in OPENSSL_config(),
which is why we switched to CONF_modules_load_file() and introduced
a comment stating why. This behavior was however changed in OpenSSL
commit abdd677125f3a9e3082f8c5692203590fdb9b860, so remove the now
outdated and incorrect comment. The mentioned commit also declares
OPENSSL_config() deprecated so keep the current coding.
Closes #4033
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (16 Jun 2019)
- RELEASE-NOTES: synced
Patrick Monnerat (16 Jun 2019)
- os400: make vsetopt() non-static as Curl_vsetopt() for os400 support.
Use it in curl_easy_setopt_ccsid().
Reported-by: jonrumsey on github
Fixes #3833
Closes #4028
Daniel Stenberg (15 Jun 2019)
- runtests: report single test time + total duration
... after each successful test.
Closes #4027
- multi: fix the transfer hash function
Follow-up from 8b987cc7eb
Reported-by: Tom van der Woerdt
Fixes #4018
Closes #4024
- unit1654: cleanup on memory failure
... to make it handle torture tests properly.
Reported-by: Marcel Raad
Fixes #4021
Closes #4022
Marcel Raad (13 Jun 2019)
- krb5: fix compiler warning
Even though the variable was used in a DEBUGASSERT, GCC 8 warned in
debug mode:
krb5.c:324:17: error: unused variable 'maj' [-Werror=unused-variable]
Just suppress the warning and declare the variable unconditionally
instead of only for DEBUGBUILD (which also missed the check for
HAVE_ASSERT_H).
Closes https://github.com/curl/curl/pull/4020
Daniel Stenberg (13 Jun 2019)
- quote.d: asterisk prefix works for SFTP as well
Reported-by: Ben Voris
Fixes #4017
Closes #4019
- multi: fix the transfer hashes in the socket hash entries
- The transfer hashes weren't using the correct keys so removing entries
failed.
- Simplified the iteration logic over transfers sharing the same socket and
they now simply are set to expire and thus get handled in the "regular"
timer loop instead.
Reported-by: Tom van der Woerdt
Fixes #4012
Closes #4014
Jay Satiro (12 Jun 2019)
- [Cliff Crosland brought this change]
url: Fix CURLOPT_MAXAGE_CONN time comparison
Old connections are meant to expire from the connection cache after
CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x
that value. This occurs because a time value measured in milliseconds is
accidentally divided by 1M instead of by 1,000.
Closes https://github.com/curl/curl/pull/4013
Daniel Stenberg (11 Jun 2019)
- test1165: verify that CURL_DISABLE_ symbols are in sync
between configure.ac and source code. They should be possible to switch
on/off in configure AND be used in source code.
- configure: remove CURL_DISABLE_TLS_SRP
It isn't used by code so stop providing the define.
Closes #4010
- Revert "cmake: add SMB to list of disabled protocols if HTTP_ONLY is specified"
This reverts commit 36738caeb78603ce24e3ea089a167b8c216fb938.
Apparently several of the appveyor windows builds broke.
- [sergey-raevskiy brought this change]
cmake: add SMB to list of disabled protocols if HTTP_ONLY is specified
Reviewed-by: Jakub Zakrzewski
Closes #3770
- RELEASE-NOTES: synced
- http2: remove CURL_DISABLE_TYPECHECK define
... in http2-less builds as it served no use.
- configure: more --disable switches to toggle off individual features
... actual support in the code for disabling these has already landed.
Closes #4009
- wolfssl: fix key pinning build error
follow-up from deb9462ff2de8
- CURLMOPT_SOCKETFUNCTION.3: clarified
Moved away the callback explanation from curl_multi_socket_action.3 and
expanded it somewhat.
Closes #4006
- wolfssl: fixup for SNI use
follow-up from deb9462ff2de8
Closes #4007
- CURLOPT_CAINFO.3: polished wording
Clarify the functionality when built to use Schannel and Secure
Transport and stop calling it the "recommended" or "preferred" way and
instead rather call it the default.
Removed the reference to the ssl comparison table as it isn't necessary.
Reported-by: Richard Alcock
Bug: https://curl.haxx.se/mail/lib-2019-06/0019.html
Closes #4005
GitHub (10 Jun 2019)
- [Daniel Stenberg brought this change]
SECURITY.md: created
Brief security policy description for use/display on github.
Daniel Gustafsson (10 Jun 2019)
- tool_cb_prg: Fix integer overflow in progress bar
Commit 61faa0b420c236480bc9ef6fd52b4ecc1e0f8d17 fixed the progress bar
width calculation to avoid integer overflow, but failed to account for
the fact that initial_size is initialized to -1 when the file size is
retrieved from the remote on an upload, causing another signed integer
overflow. Fix by separately checking for this case before the width
calculation.
Closes #3984
Reported-by: Brian Carpenter (Geeknik Labs)
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (10 Jun 2019)
- wolfssl: refer to it as wolfSSL only
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes #3903
- RELEASE-NOTES: synced
- bindlocal: detect and avoid IP version mismatches in bind()
Reported-by: Alex Grebenschikov
Fixes #3993
Closes #4002
- multi: make sure 'data' can present in several sockhash entries
Since more than one socket can be used by each transfer at a given time,
each sockhash entry how has its own hash table with transfers using that
socket.
In addition, the sockhash entry can now be marked 'blocked = TRUE'"
which then makes the delete function just set 'removed = TRUE' instead
of removing it "for real", as a way to not rip out the carpet under the
feet of a parent function that iterates over the transfers of that same
sockhash entry.
Reported-by: Tom van der Woerdt
Fixes #3961
Fixes #3986
Fixes #3995
Fixes #4004
Closes #3997
- [Sorcus brought this change]
libcurl-tutorial.3: Fix small typo (mutipart -> multipart)
Fixed-by: MrSorcus on github
Closes #4000
- unpause: trigger a timeout for event-based transfers
... so that timeouts or other state machine actions get going again
after a changing pause state. For example, if the last delivery was
paused there's no pending socket activity.
Reported-by: sstruchtrup on github
Fixes #3994
Closes #4001
Marcel Raad (9 Jun 2019)
- travis: use xenial LLVM package for scan-build
I missed that in commit 99a49d6.
- travis: update scan-build job to xenial
Closes https://github.com/curl/curl/pull/3999
Daniel Stenberg (8 Jun 2019)
- bump: start working on 7.65.2
Marcel Raad (5 Jun 2019)
- examples/htmltitle: use C++ casts between pointer types
Compilers and static analyzers warn about using C-style casts here.
Closes https://github.com/curl/curl/pull/3975
- examples/fopen: fix comparison
As want is size_t, (file->buffer_pos - want) is unsigned, so checking
if it's less than zero makes no sense.
Check if file->buffer_pos is less than want instead to avoid the
unsigned integer wraparound.
Closes https://github.com/curl/curl/pull/3975
- build: fix Codacy warnings
Reduce variable scopes and remove redundant variable stores.
Closes https://github.com/curl/curl/pull/3975
- sws: remove unused variables
Unused since commit 2f44e94.
Closes https://github.com/curl/curl/pull/3975
Version 7.65.1 (4 Jun 2019)
Daniel Stenberg (4 Jun 2019)
- RELEASE-NOTES: 7.65.1
- THANKS: new contributors from 7.65.1
Steve Holme (4 Jun 2019)
- [Frank Gevaerts brought this change]
ssl: Update outdated "openssl-only" comments for supported backends
These are for features that used to be openssl-only but were expanded
over time to support other SSL backends.
Closes #3985
Daniel Stenberg (4 Jun 2019)
- curl_share_setopt.3: improve wording [ci ship]
Reported-by: Carlos ORyan
Steve Holme (4 Jun 2019)
- tool_parsecfg: Use correct return type for GetModuleFileName()
GetModuleFileName() returns a DWORD which is a typedef of an unsigned
long and not an int.
Closes #3980
Daniel Stenberg (3 Jun 2019)
- TODO: "at least N milliseconds between requests" [ci skip]
Suggested-by: dkwolfe4 on github
Closes #3920
Steve Holme (2 Jun 2019)
- tests/server/.gitignore: Add socksd to the ignore list
Missed in 04fd6755.
Closes #3978
- tool_parsecfg: Fix control flow issue (DEADCODE)
Follow-up to 8144ba38.
Detected by Coverity CID 1445663
Closes #3976
Daniel Stenberg (2 Jun 2019)
- [Sergey Ogryzkov brought this change]
NTLM: reset proxy "multipass" state when CONNECT request is done
Closes #3972
- test334: verify HTTP 204 response with chunked coding header
Verifies that a bodyless response don't parse this content-related
header.
- [Michael Kaufmann brought this change]
http: don't parse body-related headers bodyless responses
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes #3702
Fixes #3968
Closes #3977
- tls13-docs: mention it is only for OpenSSL >= 1.1.1
Reported-by: Jay Satiro
Co-authored-by: Jay Satiro
Fixes #3938
Closes #3946
- dump-header.d: spell out that no headers == empty file [ci skip]
Reported-by: wesinator at github
Fixes #3964
Closes #3974
- singlesocket: use separate variable for inner loop
An inner loop within the singlesocket() function wrongly re-used the
variable for the outer loop which then could cause an infinite
loop. Change to using a separate variable!
Reported-by: Eric Wu
Fixes #3970
Closes #3973
- RELEASE-NOTES: synced
- [Josie Huddleston brought this change]
http2: Stop drain from being permanently set on
Various functions called within Curl_http2_done() can have the
side-effect of setting the Easy connection into drain mode (by calling
drain_this()). However, the last time we unset this for a transfer (by
calling drained_transfer()) is at the beginning of Curl_http2_done().
If the Curl_easy is reused for another transfer, it is then stuck in
drain mode permanently, which in practice makes it unable to write any
data in the new transfer.
This fix moves the last call to drained_transfer() to later in
Curl_http2_done(), after the functions that could potentially call for a
drain.
Fixes #3966
Closes #3967
Reported-by: Josie-H
Steve Holme (29 May 2019)
- conncache: Remove the DEBUGASSERT on length check
We trust the calling code as this is an internal function.
Closes #3962
Jay Satiro (29 May 2019)
- [Gisle Vanem brought this change]
system_win32: fix function prototype
- Change if_nametoindex parameter type from char * to const char *.
Follow-up to 09eef8af from this morning.
Bug: https://github.com/curl/curl/commit/09eef8af#r33716067
Marcel Raad (29 May 2019)
- appveyor: add Visual Studio solution build
Closes https://github.com/curl/curl/pull/3941
- appveyor: add support for other build systems
Introduce BUILD_SYSTEM variable, which is currently always CMake.
Closes https://github.com/curl/curl/pull/3941
Steve Holme (29 May 2019)
- url: Load if_nametoindex() dynamically from iphlpapi.dll on Windows
This fixes the static dependency on iphlpapi.lib and allows curl to
build for targets prior to Windows Vista.
This partially reverts 170bd047.
Fixes #3960
Closes #3958
Daniel Stenberg (29 May 2019)
- http: fix "error: equality comparison with extraneous parentheses"
- parse_proxy: make sure portptr is initialized
Reported-by: Benbuck Nason
fixes #3959
- url: default conn->port to the same as conn->remote_port
... so that it has a sensible value when ConnectionExists() is called which
needs it set to differentiate host "bundles" correctly on port number!
Also, make conncache:hashkey() use correct port for bundles that are proxy vs
host connections.
Probably a regression from 7.62.0
Reported-by: Tom van der Woerdt
Fixes #3956
Closes #3957
- conncache: make "bundles" per host name when doing proxy tunnels
Only HTTP proxy use where multiple host names can be used over the same
connection should use the proxy host name for bundles.
Reported-by: Tom van der Woerdt
Fixes #3951
Closes #3955
- multi: track users of a socket better
They need to be removed from the socket hash linked list with more care.
When sh_delentry() is called to remove a sockethash entry, remove all
individual transfers from the list first. To enable this, each Curl_easy struct
now stores a pointer to the sockethash entry to know how to remove itself.
Reported-by: Tom van der Woerdt and Kunal Ekawde
Fixes #3952
Fixes #3904
Closes #3953
Steve Holme (28 May 2019)
- curl-win32.h: Enable Unix Domain Sockets based on the Windows SDK version
Microsoft added support for Unix Domain Sockets in Windows 10 1803
(RS4). Rather than expect the user to enable Unix Domain Sockets by
uncommenting the #define that was added in 0fd6221f we use the RS4
pre-processor variable that is present in newer versions of the
Windows SDK.
Closes #3939
Daniel Stenberg (28 May 2019)
- [Jonas Vautherin brought this change]
cmake: support CMAKE_OSX_ARCHITECTURES when detecting SIZEOF variables
Closes #3945
Marcel Raad (27 May 2019)
- HAProxy tests: add keywords
Add the proxy and haproxy keywords in order to be able to exclude or
run these specific tests.
Closes https://github.com/curl/curl/pull/3949
Daniel Stenberg (27 May 2019)
- [Maksim Stsepanenka brought this change]
tests: make test 1420 and 1406 work with rtsp-disabled libcurl
Closes #3948
Kamil Dudka (27 May 2019)
- [Hubert Kario brought this change]
nss: allow to specify TLS 1.3 ciphers if supported by NSS
Closes #3916
Daniel Stenberg (26 May 2019)
- RELEASE-NOTES: synced
- [Jay Satiro brought this change]
Revert all SASL authzid (new feature) commits
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
- [dbrowndan brought this change]
FAQ: more minor updates and spelling fixes
Closes #3937
- RELEASE-NOTES: synced
- sectransp: handle errSSLPeerAuthCompleted from SSLRead()
Reported-by: smuellerDD on github
Fixes #3932
Closes #3933
GitHub (24 May 2019)
- [Gisle Vanem brought this change]
Fix typo.
Daniel Stenberg (23 May 2019)
- tool_setopt: for builds with disabled-proxy, skip all proxy setopts()
Reported-by: Marcel Raad
Fixes #3926
Closes #3929
Steve Holme (23 May 2019)
- winbuild: Use two space indentation
Closes #3930
GitHub (23 May 2019)
- [Gisle Vanem brought this change]
tool_parse_cfg: Avoid 2 fopen() for WIN32
Using the memdebug.h mem-leak feature, I noticed 2 calls like:
FILE tool_parsecfg.c:70 fopen("c:\Users\Gisle\AppData\Roaming\_curlrc","rt")
FILE tool_parsecfg.c:114 fopen("c:\Users\Gisle\AppData\Roaming\_curlrc","rt")
No need for 'fopen(), 'fclose()' and a 'fopen()' yet again.
Daniel Stenberg (23 May 2019)
- md4: include the mbedtls config.h to get the MD4 info
- md4: build correctly with openssl without MD4
Reported-by: elsamuko at github
Fixes #3921
Closes #3922
Patrick Monnerat (23 May 2019)
- os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid().
Daniel Stenberg (23 May 2019)
- .github/FUNDING: mention our opencollective "home" [ci skip]
Marcel Raad (23 May 2019)
- [Zenju brought this change]
config-win32: add support for if_nametoindex and getsockname
Closes https://github.com/curl/curl/pull/3923
Jay Satiro (23 May 2019)
- tests: Fix the line endings for the SASL alt-auth tests
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to a9499ff from today which added the tests.
Ref: https://github.com/curl/curl/pull/3790
Daniel Stenberg (23 May 2019)
- url: fix bad #ifdef
Regression since e91e48161235272ff485.
Reported-by: Tom Greenslade
Fixes #3924
Closes #3925
- Revert "progress: CURL_DISABLE_PROGRESS_METER"
This reverts commit 3b06e68b7734cb10a555f9d7e804dd5d808236a4.
Clearly this change wasn't good enough as it broke CURLOPT_LOW_SPEED_LIMIT +
CURLOPT_LOW_SPEED_TIME
Reported-by: Dave Reisner
Fixes #3927
Closes #3928
Steve Holme (22 May 2019)
- examples: Added SASL PLAIN authorisation identity (authzid) examples
- curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool
- sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed #3653
Closes #3790
Marc Hoersken (22 May 2019)
- tests: add support to test against OpenSSH for Windows
Testing against OpenSSH for Windows requires v7.7.0.0 or newer
due to the use of AllowUsers and DenyUsers. For more info see:
https://github.com/PowerShell/Win32-OpenSSH/wiki/sshd_config
Daniel Stenberg (22 May 2019)
- bump: start on the next release
Marcel Raad (22 May 2019)
- examples: fix "clarify calculation precedence" warnings
Closes https://github.com/curl/curl/pull/3919
- hiperfifo: remove unused variable
Closes https://github.com/curl/curl/pull/3919
- examples: remove dead variable stores
Closes https://github.com/curl/curl/pull/3919
- examples: reduce variable scopes
Closes https://github.com/curl/curl/pull/3919
- http2-download: fix format specifier
Closes https://github.com/curl/curl/pull/3919
Daniel Stenberg (22 May 2019)
- PolarSSL: deprecate support step 1. Removed from configure.
Also removed mentions from most docs.
Discussed: https://curl.haxx.se/mail/lib-2019-05/0045.html
Closes #3888
- configure/cmake: check for if_nametoindex()
- adds the check to cmake
- fixes the configure check to work for cross-compiled windows builds
Closes #3917
- parse_proxy: use the IPv6 zone id if given
If the proxy string is given as an IPv6 numerical address with a zone
id, make sure to use that for the connect to the proxy.
Reported-by: Edmond Yu
Fixes #3482
Closes #3918
Version 7.65.0 (22 May 2019)
Daniel Stenberg (22 May 2019)
- RELEASE-NOTES: 7.65.0 release
- THANKS: from the 7.65.0 release-notes
- url: convert the zone id from a IPv6 URL to correct scope id
Reported-by: GitYuanQu on github
Fixes #3902
Closes #3914
- configure: detect getsockname and getpeername on windows too
Made detection macros for these two functions in the same style as other
functions possibly in winsock in the hope this will work better to
detect these functions when cross-compiling for Windows.
Follow-up to e91e4816123
Fixes #3913
Closes #3915
Marcel Raad (21 May 2019)
- examples: remove unused variables
Fixes Codacy/CppCheck warnings.
Closes
Daniel Gustafsson (21 May 2019)
- udpateconninfo: mark variable unused
When compiling without getpeername() or getsockname(), the sockfd
paramter to Curl_udpateconninfo() became unused after commit e91e481612
added ifdef guards.
Closes #3910
Fixes https://curl.haxx.se/dev/log.cgi?id=20190520172441-32196
Reviewed-by: Marcel Raad, Daniel Stenberg
- ftp: move ftp_ccc in under featureflag
Commit e91e48161235272ff485ff32bd048c53af731f43 moved ftp_ccc in under
the FTP featureflag in the UserDefined struct, but vtls callsites were
still using it unprotected.
Closes #3912
Fixes: https://curl.haxx.se/dev/log.cgi?id=20190520044705-29865
Reviewed-by: Daniel Stenberg, Marcel Raad
Daniel Stenberg (20 May 2019)
- curl: report error for "--no-" on non-boolean options
Reported-by: Olen Andoni
Fixes #3906
Closes #3907
- [Guy Poizat brought this change]
mbedtls: enable use of EC keys
Closes #3892
- lib1560: add tests for parsing URL with too long scheme
Ref: #3905
- [Omar Ramadan brought this change]
urlapi: increase supported scheme length to 40 bytes
The longest currently registered URI scheme at IANA is 36 bytes long.
Closes #3905
Closes #3900
Marcel Raad (20 May 2019)
- lib: reduce variable scopes
Fixes Codacy/CppCheck warnings.
Closes https://github.com/curl/curl/pull/3872
- tool_formparse: remove redundant assignment
Just initialize word_begin with the correct value.
Closes https://github.com/curl/curl/pull/3873
- ssh: move variable declaration to where it's used
This way, we need only one call to free.
Closes https://github.com/curl/curl/pull/3873
- ssh-libssh: remove unused variable
sock was only used to be assigned to fd_read.
Closes https://github.com/curl/curl/pull/3873
Daniel Stenberg (20 May 2019)
- test332: verify the blksize fix
- tftp: use the current blksize for recvfrom()
bug: https://curl.haxx.se/docs/CVE-2019-5436.html
Reported-by: l00p3r on hackerone
CVE-2019-5436
Daniel Gustafsson (19 May 2019)
- version: make ssl_version buffer match for multi_ssl
When running a multi TLS backend build the version string needs more
buffer space. Make the internal ssl_buffer stack buffer match the one
in Curl_multissl_version() to allow for the longer string. For single
TLS backend builds there is no use in extended to buffer. This is a
fallout from #3863 which fixes up the multi_ssl string generation to
avoid a buffer overflow when the buffer is too small.
Closes #3875
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Steve Holme (18 May 2019)
- http_ntlm_wb: Handle auth for only a single request
Currently when the server responds with 401 on NTLM authenticated
connection (re-used) we consider it to have failed. However this is
legitimate and may happen when for example IIS is set configured to
'authPersistSingleRequest' or when the request goes thru a proxy (with
'via' header).
Implemented by imploying an additional state once a connection is
re-used to indicate that if we receive 401 we need to restart
authentication.
Missed in fe6049f0.
- http_ntlm_wb: Cleanup handshake after clean NTLM failure
Missed in 50b87c4e.
- http_ntlm_wb: Return the correct error on receiving an empty auth message
Missed in fe20826b as it wasn't implemented in http.c in b4d6db83.
Closes #3894
Daniel Stenberg (18 May 2019)
- curl: make code work with protocol-disabled libcurl
Closes #3844
- libcurl: #ifdef away more code for disabled features/protocols
- progress: CURL_DISABLE_PROGRESS_METER
- hostip: CURL_DISABLE_SHUFFLE_DNS
- netrc: CURL_DISABLE_NETRC
Viktor Szakats (16 May 2019)
- docs: Markdown and misc improvements [ci skip]
Approved-by: Daniel Stenberg
Closes #3896
- docs/RELEASE-PROCEDURE: link to live iCalendar [ci skip]
Ref: https://github.com/curl/curl/commit/0af41b40b2c7bd379b2251cbe7cd618e21fa0ea1#commitcomment-33563135
Approved-by: Daniel Stenberg
Closes #3895
Daniel Stenberg (16 May 2019)
- travis: add an osx http-only build
Closes #3887
- cleanup: remove FIXME and TODO comments
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876
Closes #3883
- curl: don't set FTP options for FTP-disabled builds
... since libcurl has started to be totally unaware of options for
disabled protocols they now return error.
Bug: https://github.com/curl/curl/commit/c9c5304dd4747cbe75d2f24be85920d572fcb5b8#commitcomment-33533937
Reported-by: Marcel Raad
Closes #3886
Steve Holme (16 May 2019)
- http_ntlm_wb: Move the type-2 message processing into a dedicated function
This brings the code inline with the other HTTP authentication mechanisms.
Closes #3890
Daniel Stenberg (15 May 2019)
- RELEASE-NOTES: synced
- docs/RELEASE-PROCEDURE: updated coming releases dates [ci skip]
- CURLOPT_READFUNCTION.3: see also CURLOPT_UPLOAD_BUFFERSIZE [ci skip]
Reported-by: Roy Bellingan
Bug: #3885
- parse_proxy: use the URL parser API
As we treat a given proxy as a URL we should use the unified URL parser
to extract the parts out of it.
Closes #3878
Steve Holme (15 May 2019)
- http_negotiate: Move the Negotiate state out of the negotiatedata structure
Given that this member variable is not used by the SASL based protocols
there is no need to have it here.
Closes #3882
- http_ntlm: Move the NTLM state out of the ntlmdata structure
Given that this member variable is not used by the SASL based protocols
there is no need to have it here.
- url: Move the negotiate state type into a dedicated enum
- url: Remove duplicate clean up of the winbind variables in conn_shutdown()
Given that Curl_disconnect() calls Curl_http_auth_cleanup_ntlm() prior
to calling conn_shutdown() and it in turn performs this, there is no
need to perform the same action in conn_shutdown().
Closes #3881
Daniel Stenberg (14 May 2019)
- urlapi: require a non-zero host name length when parsing URL
Updated test 1560 to verify.
Closes #3880
- configure: error out if OpenSSL wasn't detected when asked for
If --with-ssl is used and configure still couldn't enable SSL this
creates an error instead of just silently ignoring the fact.
Suggested-by: Isaiah Norton
Fixes #3824
Closes #3830
Daniel Gustafsson (14 May 2019)
- imap: Fix typo in comment
Steve Holme (14 May 2019)
- url: Remove unnecessary initialisation from allocate_conn()
No need to set variables to zero as calloc() does this for us.
Closes #3879
Daniel Stenberg (14 May 2019)
- CURLOPT_CAINFO.3: with Schannel, you want Windows 8 or later [ci skip]
Clues-provided-by: Jay Satiro
Clues-provided-by: Jeroen Ooms
Fixes #3711
Closes #3874
Daniel Gustafsson (13 May 2019)
- vtls: fix potential ssl_buffer stack overflow
In Curl_multissl_version() it was possible to overflow the passed in
buffer if the generated version string exceeded the size of the buffer.
Fix by inverting the logic, and also make sure to not exceed the local
buffer during the string generation.
Closes #3863
Reported-by: nevv on HackerOne/curl
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Daniel Stenberg (13 May 2019)
- RELEASE-NOTES: synced
- appveyor: also build "/ci" branches like travis
- pingpong: disable more when no pingpong enabled
- proxy: acknowledge DISABLE_PROXY more
- parsedate: CURL_DISABLE_PARSEDATE
- sasl: only enable if there's a protocol enabled using it
- mime: acknowledge CURL_DISABLE_MIME
- wildcard: disable from build when FTP isn't present
- http: CURL_DISABLE_HTTP_AUTH
- base64: build conditionally if there are users
- doh: CURL_DISABLE_DOH
Steve Holme (12 May 2019)
- auth: Rename the various authentication clean up functions
For consistency and to a avoid confusion.
Closes #3869
Daniel Stenberg (12 May 2019)
- [Jay Satiro brought this change]
docs/INSTALL: fix broken link [ci skip]
Reported-by: Joombalaya on github
Fixes #3818
Marcel Raad (12 May 2019)
- easy: fix another "clarify calculation precedence" warning
I missed this one in commit 6b3dde7fe62ea5a557fd1fd323fac2bcd0c2e9be.
- build: fix "clarify calculation precedence" warnings
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
- cmake: restore C89 compatibility of CurlTests.c
I broke it in d1b5cf830bfe169745721b21245d2217d2c2453e and
97de97daefc2ed084c91eff34af2426f2e55e134.
Reported-by: Viktor Szakats
Ref: https://github.com/curl/curl/commit/97de97daefc2ed084c91eff34af2426f2e55e134#commitcomment-33499044
Closes https://github.com/curl/curl/pull/3868
Steve Holme (11 May 2019)
- http_ntlm: Corrected the name of the include guard
Missed in f0bdd72c.
Closes #3867
- http_digest: Don't expose functions when HTTP and Crypto Auth are disabled
Closes #3861
- http_negotiate: Don't expose functions when HTTP is disabled
Daniel Stenberg (11 May 2019)
- SECURITY-PROCESS: fix links [ci skip]
Marcel Raad (11 May 2019)
- CMake: suppress unused variable warnings
I missed these in commit d1b5cf830bfe169745721b21245d2217d2c2453e.
Daniel Stenberg (11 May 2019)
- doh: disable DOH for the cases it doesn't work
Due to limitations in Curl_resolver_wait_resolv(), it doesn't work for
DOH resolves. This fix disables DOH for those.
Limitation added to KNOWN_BUGS.
Fixes #3850
Closes #3857
Jay Satiro (11 May 2019)
- checksrc.bat: Ignore snprintf warnings in docs/examples
.. because we allow snprintf use in docs/examples.
Closes https://github.com/curl/curl/pull/3862
Steve Holme (10 May 2019)
- vauth: Fix incorrect function description for Curl_auth_user_contains_domain()
...and misalignment of these comments. From a78c61a4.
Closes #3860
Jay Satiro (10 May 2019)
- Revert "multi: support verbose conncache closure handle"
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
Steve Holme (10 May 2019)
- ntlm: Fix misaligned function comments for Curl_auth_ntlm_cleanup()
From 6012fa5a.
Closes #3858
Daniel Stenberg (9 May 2019)
- BUG-BOUNTY: minor formatting fixes [ci skip]
- RELEASE-NOTES: synced
- BUG-BOUNTY.md: add the Dropbox "bonus" extra payout ability [ci skip]
Closes #3839
Kamil Dudka (9 May 2019)
- http_negotiate: do not treat failure of gss_init_sec_context() as fatal
Fixes #3726
Closes #3849
- spnego_gssapi: fix return code on gss_init_sec_context() failure
Fixes #3726
Closes #3849
Steve Holme (9 May 2019)
- gen_resp_file.bat: Removed unnecessary @ from all but the first command
There is need to use @ on every command once echo has been turned off.
Closes #3854
Jay Satiro (8 May 2019)
- http: Ignore HTTP/2 prior knowledge setting for HTTP proxies
- Do not switch to HTTP/2 for an HTTP proxy that is not tunnelling to
the destination host.
We already do something similar for HTTPS proxies by not sending h2. [1]
Prior to this change setting CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE would
incorrectly use HTTP/2 to talk to the proxy, which is not something we
support (yet?). Also it's debatable whether or not that setting should
apply to HTTP/2 proxies.
[1]: https://github.com/curl/curl/commit/17c5d05
Bug: https://github.com/curl/curl/issues/3570
Bug: https://github.com/curl/curl/issues/3832
Closes https://github.com/curl/curl/pull/3853
Marcel Raad (8 May 2019)
- travis: update mesalink build to xenial
Closes https://github.com/curl/curl/pull/3842
Daniel Stenberg (8 May 2019)
- [Ricky Leverence brought this change]
OpenSSL: Report -fips in version if OpenSSL is built with FIPS
Older versions of OpenSSL report FIPS availabilty via an OPENSSL_FIPS
define. It uses this define to determine whether to publish -fips at
the end of the version displayed. Applications that utilize the version
reported by OpenSSL will see a mismatch if they compare it to what curl
reports, as curl is not modifying the version in the same way. This
change simply adds a check to see if OPENSSL_FIPS is defined, and will
alter the reported version to match what OpenSSL itself provides. This
only appears to be applicable in versions of OpenSSL <1.1.1
Closes #3771
Kamil Dudka (7 May 2019)
- [Frank Gevaerts brought this change]
nss: allow fifos and character devices for certificates.
Currently you can do things like --cert <(cat ./cert.crt) with (at least) the
openssl backend, but that doesn't work for nss because is_file rejects fifos.
I don't actually know if this is sufficient, nss might do things internally
(like seeking back) that make this not work, so actual testing is needed.
Closes #3807
Daniel Gustafsson (6 May 2019)
- test2100: Fix typos in test description
Daniel Stenberg (6 May 2019)
- ssh: define USE_SSH if SSH is enabled (any backend)
Closes #3846
Steve Holme (5 May 2019)
- winbuild: Add our standard copyright header to the winbuild batch files
- makedebug: Fix ERRORLEVEL detection after running where.exe
Closes #3838
Daniel Stenberg (5 May 2019)
- urlapi: add CURLUPART_ZONEID to set and get
The zoneid can be used with IPv6 numerical addresses.
Updated test 1560 to verify.
Closes #3834
- [Taiyu Len brought this change]
WRITEFUNCTION: add missing set_in_callback around callback
Closes #3837
- RELEASE-NOTES: synced
- CURLMOPT_TIMERFUNCTION.3: warn about the recursive risk [ci skip]
Reported-by: Ricardo Gomes
Bug: #3537
Closes #3836
- CURLOPT_CHUNK_BGN_FUNCTION.3: document the struct and time value
The time field in the curl_fileinfo struct will always be zero. No code
was ever implemented to actually convert the date string to a time_t.
Fixes #3829
Closes #3835
- OS400/ccsidcurl.c: code style fixes
- OS400/ccsidcurl: replace use of Curl_vsetopt
(and make the code style comply)
Fixes #3833
- urlapi: strip off scope id from numerical IPv6 addresses
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes #3817
Closes #3822
- RELEASE-NOTES: synced
- multiif.h: remove unused protos
... for functions related to pipelining. Those functions were removed in
2f44e94efb3df.
Closes #3828
- [Yiming Jing brought this change]
travis: mesalink: temporarily disable test 3001
... due to SHA-1 signatures in test certs
- [Yiming Jing brought this change]
travis: upgrade the MesaLink TLS backend to v1.0.0
Closes #3823
Closes #3776
- ConnectionExists: improve non-multiplexing use case
- better log output
- make sure multiplex is enabled for it to be used
- multi: provide Curl_multiuse_state to update information
As soon as a TLS backend gets ALPN conformation about the specific HTTP
version it can now set the multiplex situation for the "bundle" and
trigger moving potentially queued up transfers to the CONNECT state.
- process_pending_handles: mark queued transfers as previously pending
With transfers being queued up, we only move one at a a time back to the
CONNECT state but now we mark moved transfers so that when a moved
transfer is confirmed "successful" (it connected) it will trigger the
move of another pending transfer. Previously, it would otherwise wait
until the transfer was done before doing this. This makes queued up
pending transfers get processed (much) faster.
- http: mark bundle as not for multiuse on < HTTP/2 response
Fixes #3813
Closes #3815
Daniel Gustafsson (1 May 2019)
- cookie: Guard against possible NULL ptr deref
In case the name pointer isn't set (due to memory pressure most likely)
we need to skip the prefix matching and reject with a badcookie to avoid
a possible NULL pointer dereference.
Closes #3820 #3821
Reported-by: Jonathan Moerman
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Patrick Monnerat (30 Apr 2019)
- os400: Add CURLOPT_MAXAGE_CONN to ILE/RPG bindings
Kamil Dudka (29 Apr 2019)
- nss: provide more specific error messages on failed init
Closes #3808
Daniel Stenberg (29 Apr 2019)
- [Reed Loden brought this change]
docs: minor polish to the bug bounty / security docs
Closes #3811
- CURL_MAX_INPUT_LENGTH: largest acceptable string input size
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes #3805
- [Tseng Jun brought this change]
curlver.h: use parenthesis in CURL_VERSION_BITS macro
Closes #3809
Marcel Raad (27 Apr 2019)
- [Simon Warta brought this change]
cmake: rename CMAKE_USE_DARWINSSL to CMAKE_USE_SECTRANSP
Closes https://github.com/curl/curl/pull/3769
Steve Holme (23 Apr 2019)
- ntlm: Missed pre-processor || (or) during rebase for cd15acd0
- ntlm: Support the NT response in the type-3 when OpenSSL doesn't include MD4
Just like we do for mbed TLS, use our local implementation of MD4 when
OpenSSL doesn't support it. This allows a type-3 message to include the
NT response.
Daniel Gustafsson (23 Apr 2019)
- INTERNALS: fix misindentation of ToC item
Kerberos was incorrectly indented as a subsection under FTP, which is
incorrect as they are both top level sections. A fix for this was first
attempted in commit fef38a0898322f285401c5ff2f5e7c90dbf3be63 but that
was a few paddles short of being complete.
- [Aron Bergman brought this change]
INTERNALS: Add structs to ToC
Add the subsections under "Structs in libcurl" to the table of contents.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- [Aron Bergman brought this change]
INTERNALS: Add code highlighting
Make all struct members under the Curl_handler section
print in monospace font.
Closes #3801
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Daniel Stenberg (22 Apr 2019)
- docs/BUG-BOUNTY: bug bounty time [skip ci]
Introducing the curl bug bounty program on hackerone. We now recommend
filing security issues directly in the hackerone ticket system which
only is readable to curl security team members.
Assisted-by: Daniel Gustafsson
Closes #3488
Steve Holme (22 Apr 2019)
- sasl: Don't send authcid as authzid for the PLAIN mechanism as per RFC 4616
RFC 4616 specifies the authzid is optional in the client authentication
message and that the server will derive the authorisation identity
(authzid) from the authentication identity (authcid) when not specified
by the client.
Jay Satiro (22 Apr 2019)
- [Gisle Vanem brought this change]
memdebug: fix variable name
Follow-up to 76b6348 which renamed logfile as curl_dbg_logfile.
Ref: https://github.com/curl/curl/commit/76b6348#r33259088
Steve Holme (21 Apr 2019)
- vauth/cleartext: Don't send the authzid if it is empty
Follow up to 762a292f.
Daniel Stenberg (21 Apr 2019)
- test 196,197,198: add 'retry' keyword [skip ci]
- RELEASE-NOTES: synced
- CURLOPT_MAXAGE_CONN: set the maximum allowed age for conn reuse
... and disconnect too old ones instead of trying to reuse.
Default max age is set to 118 seconds.
Ref: #3722
Closes #3782
Daniel Gustafsson (20 Apr 2019)
- [Po-Chuan Hsieh brought this change]
altsvc: Fix building with cookies disables
ALTSVC requires Curl_get_line which is defined in lib/cookie.c inside a #if
check of HTTP and COOKIES. That makes Curl_get_line undefined if COOKIES is
disabled. Fix by splitting out the function into a separate file which can
be included where needed.
Closes #3717
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Daniel Stenberg (20 Apr 2019)
- test1002: correct the name [skip ci]
- test660: verify CONNECT_ONLY with IMAP
which basically just makes sure LOGOUT is *not* issued on disconnect
- Curl_disconnect: treat all CONNECT_ONLY connections as "dead"
Since the connection has been used by the "outside" we don't know the
state of it anymore and curl should not use it anymore.
Bug: https://curl.haxx.se/mail/lib-2019-04/0052.html
Closes #3795
- multi: fix the statenames (follow-up fix from 2f44e94efb3df8e)
The list of names must be in sync with the defined states in the header
file!
Steve Holme (16 Apr 2019)
- openvms: Remove pre-processors for Windows as VMS cannot support them
- openvms: Remove pre-processor for SecureTransport as VMS cannot support it
Fixes #3768
Closes #3785
Jay Satiro (16 Apr 2019)
- TODO: Add issue link to an existing entry
Daniel Stenberg (16 Apr 2019)
- RELEASE-NOTES: synced
Jay Satiro (16 Apr 2019)
- tool_help: Warn if curl and libcurl versions do not match
.. because functionality may be affected if the versions differ.
This commit implements TODO 18.7 "warning if curl version is not in sync
with libcurl version".
Ref: https://github.com/curl/curl/blob/curl-7_64_1/docs/TODO#L1028-L1033
Closes https://github.com/curl/curl/pull/3774
Steve Holme (16 Apr 2019)
- md5: Update the function signature following d84da52d
- md5: Forgot to update the code alignment in d84da52d
- md5: Return CURLcode from the internally accessible functions
Following 28f826b3 to return CURLE_OK instead of numeric 0.
Daniel Gustafsson (15 Apr 2019)
- tests: Run global cleanup at end of tests
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes #3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Marcel Raad (15 Apr 2019)
- travis: use mbedtls from Xenial
No need to build it from source anymore.
Closes https://github.com/curl/curl/pull/3779
- travis: use libpsl from Xenial
This makes building libpsl and libidn2 from source unnecessary and
removes the need for the autopoint and libunistring-dev packages.
Closes https://github.com/curl/curl/pull/3779
Daniel Stenberg (15 Apr 2019)
- runtests: start socksd like other servers
... without a $srcdir prefix. Triggered by the failures in several
autobuilds.
Closes #3781
Daniel Gustafsson (14 Apr 2019)
- socksd: Fix typos
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- socksd: Properly decorate static variables
Mark global variables static to avoid compiler warning in Clang when
using -Wmissing-variable-declarations.
Closes #3778
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Steve Holme (14 Apr 2019)
- md(4|5): Fixed indentation oddities with the importation of replacement code
The indentation from 211d5329 and 57d6d253 was a little strange as
parts didn't align correctly, uses 4 spaces rather than 2. Checked
the indentation of the original source so it aligns, albeit, using
curl style.
- md5: Code style to return CURLE_OK rather than numeric 0
- md5: Corrected code style for some pointer arguments
Marcel Raad (13 Apr 2019)
- travis: update some builds to xenial
Xenial comes with more up-to-date software versions and more available
packages, some of which we currently build from source. Unfortunately,
some builds would fail with Xenial because of assertion failures in
Valgrind when using OpenSSL, so leave these at Trusty.
Closes https://github.com/curl/curl/pull/3777
Daniel Stenberg (13 Apr 2019)
- test: make tests and test scripts use socksd for SOCKS
Make all SOCKS tests use socksd instead of ssh.
- socksd: new SOCKS 4+5 server for tests
Closes #3752
- singleipconnect: show port in the verbose "Trying ..." message
To aid debugging better.
- [tmilburn brought this change]
CURLOPT_ADDRESS_SCOPE: fix range check and more
Commit 9081014 fixed most of the confusing issues between scope id and
scope however 844896d added bad limits checking assuming that the scope
is being set and not the scope id.
I have fixed the documentation so it all refers to scope ids.
In addition Curl_if2ip refered to the scope id as remote_scope_id which
is incorrect, so I renamed it to local_scope_id.
Adjusted-by: Daniel Stenberg
Closes #3655
Closes #3765
Fixes #3713
- urlapi: stricter CURLUPART_PORT parsing
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753
Closes #3762
Jay Satiro (13 Apr 2019)
- [Jan Ehrhardt brought this change]
winbuild: Support MultiSSL builds
- Remove the lines in winbuild/Makefile.vc that generate an error with
multiple SSL backends.
- Add /DCURL_WITH_MULTI_SSL in winbuild/MakefileBuild.vc if multiple SSL
backends are set.
Closes https://github.com/curl/curl/pull/3772
Daniel Stenberg (12 Apr 2019)
- travis: remove mesalink builds (temporarily?)
Since the mesalink build started to fail on travis, even though we build
a fixed release version, we disable it to prevent it from blocking
progress.
Closes #3767
- openssl: mark connection for close on TLS close_notify
Without this, detecting and avoid reusing a closed TLS connection
(without a previous GOAWAY) when doing HTTP/2 is tricky.
Reported-by: Tom van der Woerdt
Fixes #3750
Closes #3763
- RELEASE-NOTES: synced
Steve Holme (11 Apr 2019)
- vauth/cleartext: Update the PLAIN login function signature to match RFC 4616
Functionally this doesn't change anything as we still use the username
for both the authorisation identity and the authentication identity.
Closes #3757
Daniel Stenberg (11 Apr 2019)
- test1906: verify CURLOPT_CURLU + CURLOPT_PORT usage
Based-on-code-by: Poul T Lomholt
- url: always clone the CUROPT_CURLU handle
Since a few code paths actually update that data.
Fixes #3753
Closes #3761
Reported-by: Poul T Lomholt
- CURLOPT_DNS_USE_GLOBAL_CACHE: remove
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes #3654
Marcel Raad (11 Apr 2019)
- travis: install libgnutls28-dev only for --with-gnutls build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install libnss3-dev only for --with-nss build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install libssh2-dev only for --with-libssh2 build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install libssh-dev only for --with-libssh build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install krb5-user only for --with-gssapi build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install lcov only for the coverage job
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install clang only when needed
This reduces the GCC job runtimes a little and it's needed to
selectively update clang builds to xenial.
Closes https://github.com/curl/curl/pull/3721
- AppVeyor: enable testing for WinSSL build
Closes https://github.com/curl/curl/pull/3725
- build: fix Codacy/CppCheck warnings
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
- polarssl_threadlock: remove conditionally unused code
Make functions no-ops if neither both USE_THREADS_POSIX and
HAVE_PTHREAD_H nor both USE_THREADS_WIN32 and HAVE_PROCESS_H are
defined. Previously, if only one of them was defined, there was either
code compiled that did nothing useful or the wrong header included for
the functions used.
Also, move POLARSSL_MUTEX_T define to implementation file as it's not
used externally.
Closes https://github.com/curl/curl/pull/3739
- lib557: initialize variables
These variables are only conditionally initialized.
Closes https://github.com/curl/curl/pull/3739
- lib509: add missing include for strdup
Closes https://github.com/curl/curl/pull/3739
- README.md: fix no-consecutive-blank-lines Codacy warning
Consistently use one blank line between blocks.