| #!/bin/bash |
| |
| PS4='$LINENO:' |
| CRYPTSETUP=../src/cryptsetup |
| |
| CRYPTSETUP_VALGRIND=../src/.libs/cryptsetup |
| CRYPTSETUP_LIB_VALGRIND=../lib/.libs |
| |
| DEV_NAME=dummy |
| DEV_NAME2=dummy2 |
| DEV_NAME3=dummy3 |
| ORIG_IMG=luks-test-orig |
| IMG=luks-test |
| IMG10=luks-test-v10 |
| HEADER_IMG=luks-header |
| KEY1=key1 |
| KEY2=key2 |
| KEY5=key5 |
| KEYE=keye |
| PWD0="compatkey" |
| PWD1="93R4P4pIqAH8" |
| PWD2="mymJeD8ivEhE" |
| PWD3="ocMakf3fAcQO" |
| PWDW="rUkL4RUryBom" |
| |
| LUKS_HEADER="S0-5 S6-7 S8-39 S40-71 S72-103 S104-107 S108-111 R112-131 R132-163 S164-167 S168-207 A0-591" |
| KEY_SLOT0="S208-211 S212-215 R216-247 A248-251 A251-255" |
| KEY_MATERIAL0="R4096-68096" |
| KEY_MATERIAL0_EXT="R4096-68096" |
| |
| KEY_SLOT1="S256-259 S260-263 R264-295 A296-299 A300-303" |
| KEY_MATERIAL1="R69632-133632" |
| KEY_MATERIAL1_EXT="S69632-133632" |
| |
| KEY_SLOT5="S448-451 S452-455 R456-487 A488-491 A492-495" |
| KEY_MATERIAL5="R331776-395264" |
| KEY_MATERIAL5_EXT="S331776-395264" |
| |
| TEST_UUID="12345678-1234-1234-1234-123456789abc" |
| |
| LOOPDEV=$(losetup -f 2>/dev/null) |
| [ -f /etc/system-fips ] && FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null) |
| |
| function remove_mapping() |
| { |
| [ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove $DEV_NAME3 |
| [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove $DEV_NAME2 |
| [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME |
| losetup -d $LOOPDEV >/dev/null 2>&1 |
| rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG >/dev/null 2>&1 |
| } |
| |
| function force_uevent() |
| { |
| DNAME=$(echo $LOOPDEV | cut -f3 -d /) |
| echo "change" >/sys/block/$DNAME/uevent |
| } |
| |
| function fail() |
| { |
| [ -n "$1" ] && echo "$1" |
| remove_mapping |
| echo "FAILED" |
| exit 2 |
| } |
| |
| function can_fail_fips() |
| { |
| # Ignore this fail if running in FIPS mode |
| [ -z "$FIPS_MODE" -o "$FIPS_MODE" -eq 0 ] && fail $1 |
| } |
| |
| function skip() |
| { |
| [ -n "$1" ] && echo "$1" |
| remove_mapping |
| exit 0 |
| } |
| |
| function prepare() |
| { |
| [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME |
| |
| case "$2" in |
| wipe) |
| remove_mapping |
| dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1 |
| sync |
| losetup $LOOPDEV $IMG |
| ;; |
| new) |
| remove_mapping |
| bzip2 -cd compatimage.img.bz2 > $IMG |
| # FIXME: switch to internal loop (no losetup at all) |
| echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \ |
| grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped." |
| losetup $LOOPDEV $IMG |
| bzip2 -cd compatv10image.img.bz2 > $IMG10 |
| ;; |
| reuse | *) |
| if [ ! -e $IMG ]; then |
| bzip2 -cd compatimage.img.bz2 > $IMG |
| losetup $LOOPDEV $IMG |
| fi |
| [ ! -e $IMG10 ] && bzip2 -cd compatv10image.img.bz2 > $IMG10 |
| ;; |
| esac |
| |
| if [ ! -e $KEY1 ]; then |
| dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1 |
| fi |
| |
| if [ ! -e $KEY2 ]; then |
| dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1 |
| fi |
| |
| if [ ! -e $KEY5 ]; then |
| dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1 |
| fi |
| |
| if [ ! -e $KEYE ]; then |
| touch $KEYE |
| fi |
| |
| cp $IMG $ORIG_IMG |
| [ -n "$1" ] && echo "CASE: $1" |
| } |
| |
| function check() |
| { |
| sync |
| [ -z "$1" ] && return |
| ./differ $ORIG_IMG $IMG $1 || fail |
| } |
| |
| function check_exists() |
| { |
| [ -b /dev/mapper/$DEV_NAME ] || fail |
| check $1 |
| } |
| |
| function valgrind_setup() |
| { |
| which valgrind >/dev/null 2>&1 || fail "Cannot find valgrind." |
| [ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable." |
| export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH" |
| } |
| |
| function valgrind_run() |
| { |
| INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@" |
| } |
| |
| [ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped." |
| [ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped." |
| |
| [ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run |
| |
| # LUKS tests |
| |
| prepare "[1] open - compat image - acceptance check" new |
| echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| check_exists |
| ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ') |
| [ "$ORG_SHA1" = 676062b66ebf36669dab705442ea0762dfc091b0 ] || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| # Check it can be opened from header backup as well |
| $CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail |
| echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail |
| check_exists |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # Check restore |
| $CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail |
| |
| # Repeat for V1.0 header - not aligned first keyslot |
| echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME || fail |
| check_exists |
| ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ') |
| [ "$ORG_SHA1" = 51b48c2471a7593ceaf14dc5e66bca86ed05f6cc ] || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| rm -f $HEADER_IMG |
| $CRYPTSETUP luksHeaderBackup $IMG10 --header-backup-file $HEADER_IMG |
| echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail |
| check_exists |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[2] open - compat image - denial check" new |
| echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| echo $PWDW | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME 2>/dev/null && fail |
| check |
| |
| # All headers items and first key material section must change |
| prepare "[3] format" wipe |
| echo $PWD1 | $CRYPTSETUP -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat $LOOPDEV || fail |
| check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0" |
| |
| prepare "[4] format using hash sha512" wipe |
| echo $PWD1 | $CRYPTSETUP -i 1000 -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat $LOOPDEV || fail |
| check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0" |
| |
| prepare "[5] open" |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail |
| echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| check_exists |
| |
| # Key Slot 1 and key material section 1 must change, the rest must not. |
| prepare "[6] add key" |
| echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV || fail |
| check "$KEY_SLOT1 $KEY_MATERIAL1" |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| # Unsuccessful Key Delete - nothing may change |
| prepare "[7] unsuccessful delete" |
| echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail |
| $CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail |
| $CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail |
| check |
| |
| # Delete Key Test |
| # Key Slot 1 and key material section 1 must change, the rest must not |
| prepare "[8] successful delete" |
| $CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail |
| check "$KEY_SLOT1 $KEY_MATERIAL1_EXT" |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| # Key Slot 1 and key material section 1 must change, the rest must not |
| prepare "[9] add key test for key files" |
| echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV $KEY1 || fail |
| check "$KEY_SLOT1 $KEY_MATERIAL1" |
| $CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| # Key Slot 1 and key material section 1 must change, the rest must not |
| prepare "[10] delete key test with key1 as remaining key" |
| $CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail |
| check "$KEY_SLOT0 $KEY_MATERIAL0_EXT" |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail |
| |
| # Delete last slot |
| prepare "[11] delete last key" wipe |
| echo $PWD1 | $CRYPTSETUP luksFormat $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| |
| # Format test for ESSIV, and some other parameters. |
| prepare "[12] parameter variation test" wipe |
| $CRYPTSETUP -q -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat $LOOPDEV $KEY1 || fail |
| check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0" |
| $CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail |
| |
| prepare "[13] open/close - stacked devices" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat /dev/mapper/$DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME2 || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[14] format/open - passphrase on stdin & new line" wipe |
| # stdin defined by "-" must take even newline |
| #echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksFormat $LOOPDEV || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| # now also try --key-file |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV --key-file=- || fail |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # process newline if from stdin |
| echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV || fail |
| echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[15] UUID - use and report provided UUID" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --uuid blah $LOOPDEV 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --uuid $TEST_UUID $LOOPDEV || fail |
| tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) |
| [ "$tst"x = "$TEST_UUID"x ] || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $LOOPDEV || fail |
| $CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail |
| tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) |
| [ "$tst"x = "$TEST_UUID"x ] || fail |
| |
| prepare "[16] luksFormat" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --master-key-file /dev/urandom $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --master-key-file /dev/urandom $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP -q luksFormat --master-key-file /dev/urandom -s 256 --uuid $TEST_UUID $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # open by UUID |
| force_uevent # some systems do not update loop by-uuid |
| $CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # empty keyfile |
| $CRYPTSETUP -q luksFormat $LOOPDEV $KEYE || fail |
| $CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| # open by volume key |
| echo $PWD1 | $CRYPTSETUP -q luksFormat -s 256 --master-key-file $KEY1 $LOOPDEV || fail |
| $CRYPTSETUP luksOpen --master-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksOpen --master-key-file $KEY1 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[17] AddKey volume key, passphrase and keyfile" wipe |
| # masterkey |
| echo $PWD1 | $CRYPTSETUP -q luksFormat -i1 $LOOPDEV --master-key-file /dev/zero --key-slot 3 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail |
| echo $PWD2 | $CRYPTSETUP luksAddKey -i1 $LOOPDEV --master-key-file /dev/zero --key-slot 4 || fail |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail |
| echo $PWD3 | $CRYPTSETUP luksAddKey -i1 $LOOPDEV --master-key-file /dev/null --key-slot 5 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey -i1 $LOOPDEV --master-key-file /dev/zero --key-slot 5 $KEY1 || fail |
| $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail |
| |
| # special "-" handling |
| $CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 3 || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey -i1 $LOOPDEV -d $KEY1 - || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey -i1 $LOOPDEV -d - $KEY2 || fail |
| $CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail |
| |
| # [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2 |
| $CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 3 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -i1 -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail |
| # keyfile/keyfile |
| $CRYPTSETUP luksAddKey $LOOPDEV -i1 -d $KEY1 $KEY2 --key-slot 4 || fail |
| $CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail |
| # passphrase/keyfile |
| echo $PWD1 | $CRYPTSETUP luksAddKey -i1 $LOOPDEV -d $KEY1 --key-slot 0 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail |
| # passphrase/passphrase |
| echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey -i1 $LOOPDEV --key-slot 1 || fail |
| echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail |
| # keyfile/passphrase |
| echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey -i1 $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail |
| |
| prepare "[18] RemoveKey passphrase and keyfile" reuse |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: DISABLED" || fail |
| # kill slot using passphrase from 1 |
| echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: DISABLED" || fail |
| # remove key0 / slot 0 |
| echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail |
| # last keyslot, in batch mode no passphrase needed... |
| $CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail |
| |
| prepare "[19] create & status & resize" wipe |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "mode:" | grep -q "readonly" || fail |
| $CRYPTSETUP -q resize $DEV_NAME --size 100 || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP -q resize $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "19997 sectors" || fail |
| # Resize underlying loop device as well |
| truncate -s 16M $IMG || fail |
| $CRYPTSETUP -q resize $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "32765 sectors" || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP -q status $DEV_NAME >/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 $LOOPDEV || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 --size 100 $LOOPDEV || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| # verify is ignored on non-tty input |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --verify-passphrase 2>/dev/null || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 -l -1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d blah 2>/dev/null && fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d /dev/urandom || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| |
| prepare "[20] Disallow open/create if already mapped." wipe |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail |
| $CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $LOOPDEV 2>/dev/null && fail |
| $CRYPTSETUP remove $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| |
| prepare "[21] luksDump" wipe |
| echo $PWD1 | $CRYPTSETUP -q luksFormat --uuid $TEST_UUID $LOOPDEV $KEY1 || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail |
| echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key | grep -q "MK dump:" || can_fail_fips |
| $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key -d $KEY1 | grep -q "MK dump:" || can_fail_fips |
| |
| prepare "[22] remove disappeared device" wipe |
| dmsetup create $DEV_NAME --table "0 5000 linear $LOOPDEV 2" || fail |
| echo $PWD1 | $CRYPTSETUP -q -i 0 luksFormat /dev/mapper/$DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail |
| # underlying device now returns error but node is still present |
| dmsetup load $DEV_NAME --table "0 5000 error" || fail |
| dmsetup resume $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME2 || fail |
| dmsetup remove $DEV_NAME || fail |
| |
| prepare "[23] ChangeKey passphrase and keyfile" wipe |
| # [0]$KEY1 [1]key0 |
| $CRYPTSETUP -q luksFormat $LOOPDEV $KEY1 --key-slot 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 --key-slot 1 || fail |
| # keyfile [0] / keyfile [0] |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 --key-slot 0 || fail |
| # passphrase [1] / passphrase [1] |
| echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV --key-slot 1 || fail |
| # keyfile [0] / keyfile [new] |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY2 $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail |
| # passphrase [1] / passphrase [new] |
| echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail |
| # use all slots |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail |
| # still allows replace |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 || fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail |
| |
| prepare "[24] Keyfile limit" wipe |
| $CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail |
| $CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l -1 2>/dev/null && fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i1 -l 13 --new-keyfile-size 12 || fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail |
| $CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -i1 -l 13 || fail |
| # -l is ignored for stdin if _only_ passphrase is used |
| echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 -i1 || fail |
| # this is stupid, but expected |
| echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail |
| echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail |
| echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail |
| # offset |
| $CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksAddKey $LOOPDEV -i1 -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail |
| $CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksChangeKey $LOOPDEV -i1 -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail |
| $CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| |
| prepare "[25] Create shared segments" wipe |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --offset 0 --size 256 || fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 --shared || fail |
| $CRYPTSETUP -q remove $DEV_NAME2 || fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| |
| prepare "[26] Suspend/Resume" wipe |
| # only LUKS is supported |
| echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail |
| $CRYPTSETUP -q remove $DEV_NAME || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail |
| # LUKS |
| echo $PWD1 | $CRYPTSETUP -q luksFormat $LOOPDEV || fail |
| echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME || fail |
| $CRYPTSETUP -q resize $DEV_NAME 2>/dev/null && fail |
| echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME -T 1 2>/dev/null && fail |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail |
| $CRYPTSETUP -q luksClose $DEV_NAME || fail |
| |
| prepare "[27] luksOpen with specified key slot number" wipe |
| # first, let's try passphrase option |
| echo $PWD3 | $CRYPTSETUP luksFormat -S 5 $LOOPDEV || fail |
| check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5 |
| echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail |
| check_exists |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey -S 0 $LOOPDEV || fail |
| check $LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0 |
| echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| # second, try it with keyfiles |
| $CRYPTSETUP luksFormat -q -S 5 -d $KEY5 $LOOPDEV || fail |
| check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5 |
| $CRYPTSETUP luksAddKey -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail |
| check $LUKS_HEADER $KEY_SLOT1 $KEY_MATERIAL1 |
| $CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail |
| check_exists |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| $CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| $CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME && fail |
| [ -b /dev/mapper/$DEV_NAME ] && fail |
| |
| prepare "[28] Detached LUKS header" wipe |
| dd if=/dev/zero of=$HEADER_IMG bs=1M count=4 >/dev/null 2>&1 |
| echo $PWD1 | $CRYPTSETUP luksFormat -i1 $LOOPDEV --header $HEADER_IMG || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat -i1 $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail |
| echo $PWD1 | $CRYPTSETUP luksFormat -i1 $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail |
| echo $PWD1 | $CRYPTSETUP luksFormat -i1 $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail |
| echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail |
| $CRYPTSETUP -q resize $DEV_NAME --size 100 --header $HEADER_IMG || fail |
| $CRYPTSETUP -q status $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "type:" | grep -q "n/a" || fail |
| $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail |
| $CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail |
| echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| echo $PWD1 | $CRYPTSETUP luksAddKey -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail |
| $CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: ENABLED" || fail |
| $CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail |
| $CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: DISABLED" || fail |
| |
| prepare "[29] Repair metadata" wipe |
| $CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 0 || fail |
| # second sector overwrite should corrupt keyslot 6+7 |
| dd if=/dev/urandom of=$LOOPDEV bs=512 seek=1 count=1 >/dev/null 2>&1 |
| $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME >/dev/null 2>&1 && fail |
| $CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail |
| $CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail |
| $CRYPTSETUP luksClose $DEV_NAME || fail |
| |
| prepare "[30] LUKS erase" wipe |
| $CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY5 --key-slot 5 || fail |
| $CRYPTSETUP luksAddKey -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail |
| $CRYPTSETUP luksErase -q $LOOPDEV || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail |
| $CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: DISABLED" || fail |
| |
| remove_mapping |
| exit 0 |
