| [ 0.361526] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches |
| [ 0.361542] msm_rpm_dev_probe: APSS-RPM communication over SMD |
| [ 0.364179] smd_channel_probe_now: allocation table not initialized |
| [ 0.365665] smd_channel_probe_now: allocation table not initialized |
| [ 0.366843] smd_channel_probe_now: allocation table not initialized |
| [ 0.368797] msm_watchdog b017000.qcom,wdt: wdog absent resource not present |
| [ 0.369209] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized |
| [ 0.370763] msm-sn-fuse a4128.snfuse: SN interface initialized |
| [ 0.378294] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0 |
| [ 0.382014] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 |
| [ 0.385546] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle |
| [ 0.385948] pm8953_s5_avs_limit: 400 <--> 1140 mV |
| [ 0.386159] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us |
| [ 0.394160] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 |
| [ 0.394806] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 |
| [ 0.395181] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 |
| [ 0.396003] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 |
| [ 0.398805] apc_mem_acc_corner: 0 <--> 0 mV |
| [ 0.400216] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 2 |
| [ 0.400232] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3 |
| [ 0.400244] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 2 |
| [ 0.400256] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 |
| [ 0.400295] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable |
| [ 0.400436] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV |
| [ 0.400449] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV |
| [ 0.400461] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 795000 uV |
| [ 0.400472] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV |
| [ 0.400549] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 482 |
| [ 0.400563] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 569, quot_offset[ 7]= 85 |
| [ 0.400576] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 802, quot_offset[ 7]= 230 |
| [ 0.400589] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1034, quot_offset[ 7]= 230 |
| [ 0.400930] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = -15, aging RO scale = 2800 QUOT/V |
| [ 0.401137] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop |
| [ 0.401316] apc_corner: 0 <--> 0 mV at 0 mV |
| [ 0.402835] gfx_mem_acc_corner: 0 <--> 0 mV |
| [ 0.403495] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517 |
| [ 0.403508] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517 |
| [ 0.423309] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 |
| [ 0.424501] msm_thermal:sensor_mgr_init_threshold threshold id already initialized |
| [ 0.424661] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe |
| [ 0.424675] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. |
| [ 0.424695] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues |
| [ 0.424709] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 |
| [ 0.425079] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 |
| [ 0.425266] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517 |
| [ 0.425283] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517 |
| [ 0.425649] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 |
| [ 0.425816] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517 |
| [ 0.425831] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517 |
| [ 0.426205] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 |
| [ 0.426370] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517 |
| [ 0.426386] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517 |
| [ 0.426754] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0 |
| [ 0.426866] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!! |
| [ 0.426960] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches |
| [ 0.426974] msm_rpm_dev_probe: APSS-RPM communication over SMD |
| [ 0.427908] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle |
| [ 0.428895] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle |
| [ 0.429549] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle |
| [ 0.430265] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle |
| [ 0.431152] pm8953_s3: 1225 mV normal idle |
| [ 0.432052] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle |
| [ 0.432940] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle |
| [ 0.433622] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle |
| [ 0.434268] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle |
| [ 0.435167] pm8953_l1: 1000 mV normal idle |
| [ 0.436049] pm8953_l2: 975 <--> 1225 mV at 975 mV normal idle |
| [ 0.436960] pm8953_l3: 925 mV normal idle |
| [ 0.437844] pm8953_l5: 1800 mV normal idle |
| [ 0.438746] pm8953_l6: 1800 mV normal idle |
| [ 0.439635] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle |
| [ 0.440329] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle |
| [ 0.441212] pm8953_l8: 2900 mV normal idle |
| [ 0.442114] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle |
| [ 0.443000] pm8953_l10: 2850 mV normal idle |
| [ 0.443903] pm8953_l11: 2950 mV normal idle |
| [ 0.444785] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle |
| [ 0.445682] pm8953_l13: 3125 mV normal idle |
| [ 0.446551] pm8953_l16: 1800 mV normal idle |
| [ 0.447457] pm8953_l17: 2850 mV normal idle |
| [ 0.448344] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle |
| [ 0.449244] pm8953_l22: 2800 mV normal idle |
| [ 0.450161] pm8953_l23: 975 <--> 1225 mV at 975 mV normal idle |
| [ 0.451114] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV |
| [ 0.451129] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV |
| [ 0.451141] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV |
| [ 0.451160] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000 |
| [ 0.451172] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000 |
| [ 0.451185] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default |
| [ 0.451527] msm_gfx_ldo: 0 <--> 0 mV at 0 mV |
| [ 0.451939] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 |
| [ 0.453120] msm_thermal:sensor_mgr_init_threshold threshold id already initialized |
| [ 0.453930] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) |
| [ 0.453945] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 |
| [ 0.453961] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19) |
| [ 0.453972] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19 |
| [ 0.453983] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init. |
| [ 0.456284] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) |
| [ 0.456298] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 |
| [ 0.456314] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19) |
| [ 0.456325] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19 |
| [ 0.456340] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) |
| [ 0.456351] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 |
| [ 0.456365] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19) |
| [ 0.456376] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19 |
| [ 0.457044] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 |
| [ 0.457239] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517 |
| [ 0.457256] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517 |
| [ 0.457650] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 |
| [ 0.457817] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517 |
| [ 0.457833] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517 |
| [ 0.458209] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 |
| [ 0.458375] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517 |
| [ 0.458391] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517 |
| [ 0.488769] ------------[ cut here ]------------ |
| [ 0.488810] WARNING: CPU: 3 PID: 6 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/clk/msm/clock-local2.c:1005 branch_clk_handoff+0x7c/0xc0() |
| [ 0.488822] gcc_usb_phy_cfg_ahb_clk clock is enabled in HW even though ENABLE_BIT is not set |
| [ 0.488831] Modules linked in: |
| [ 0.488853] CPU: 3 PID: 6 Comm: kworker/u16:0 Tainted: G W 3.18.31-perf-g489aada4 #1 |
| [ 0.488863] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) |
| [ 0.488882] Workqueue: deferwq deferred_probe_work_func |
| [ 0.488896] Call trace: |
| [ 0.488913] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c |
| [ 0.488928] [<ffffffc00008a294>] show_stack+0x20/0x28 |
| [ 0.488944] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 |
| [ 0.488957] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 |
| [ 0.488970] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac |
| [ 0.488983] [<ffffffc000a816a0>] branch_clk_handoff+0x7c/0xc0 |
| [ 0.488996] [<ffffffc000a7db70>] __handoff_clk+0xd0/0x2e4 |
| [ 0.489009] [<ffffffc000a7df08>] msm_clock_register+0x184/0x248 |
| [ 0.489021] [<ffffffc000a7e05c>] of_msm_clock_register+0x90/0xa0 |
| [ 0.489036] [<ffffffc000a921a0>] msm_gcc_probe+0x120/0x214 |
| [ 0.489051] [<ffffffc0005cf840>] platform_drv_probe+0x44/0x90 |
| [ 0.489064] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c |
| [ 0.489077] [<ffffffc0005cda68>] __device_attach+0x34/0x54 |
| [ 0.489091] [<ffffffc0005cbaa4>] bus_for_each_drv+0x98/0xc8 |
| [ 0.489103] [<ffffffc0005cd7ac>] device_attach+0x78/0xa4 |
| [ 0.489116] [<ffffffc0005ccd14>] bus_probe_device+0x38/0xac |
| [ 0.489129] [<ffffffc0005cd1a8>] deferred_probe_work_func+0x7c/0xa8 |
| [ 0.489145] [<ffffffc0000bdd70>] process_one_work+0x264/0x440 |
| [ 0.489159] [<ffffffc0000be79c>] worker_thread+0x32c/0x448 |
| [ 0.489173] [<ffffffc0000c314c>] kthread+0xf8/0x100 |
| [ 0.489183] ---[ end trace 0af8bdd5bcf4f302 ]--- |
| [ 0.491893] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks |
| [ 0.492190] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0 |
| [ 0.495241] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0 |
| [ 0.495258] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0 |
| [ 0.495274] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0 |
| [ 0.495288] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0 |
| [ 0.495303] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0 |
| [ 0.495316] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0 |
| [ 0.495327] ramp_lmh_sid: Use Default LMH SID |
| [ 0.495336] ramp_dfs_sid: Use Default DFS SID |
| [ 0.495345] ramp_link_sid: Use Default Link SID |
| [ 0.495415] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1 |
| [ 0.495430] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1 |
| [ 0.495445] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1 |
| [ 0.495458] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1 |
| [ 0.495473] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1 |
| [ 0.495486] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1 |
| [ 0.495496] ramp_lmh_sid: Use Default LMH SID |
| [ 0.495504] ramp_dfs_sid: Use Default DFS SID |
| [ 0.495513] ramp_link_sid: Use Default Link SID |
| [ 0.495589] clock_rcgwr_init: RCGwR Init Completed |
| [ 0.496145] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7) |
| [ 0.496158] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1 |
| [ 0.496169] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7 |
| [ 0.496179] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1 |
| [ 0.496189] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7 |
| [ 0.497429] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 |
| [ 0.497662] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. |
| [ 0.497676] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) |
| [ 0.499449] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 |
| [ 0.499735] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. |
| [ 0.499749] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) |
| [ 0.500096] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer |
| [ 0.502108] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 |
| [ 0.502419] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. |
| [ 0.502433] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) |
| [ 0.505020] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks. |
| [ 0.572717] qcom,qpnp-pin qpnp-pin-17: qpnp_pin_probe: no device nodes specified in topology |
| [ 0.572749] qcom,qpnp-pin: probe of qpnp-pin-17 failed with error -22 |
| [ 0.573336] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping |
| [ 0.573359] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping |
| [ 0.576961] KPI: Bootloader start count = 27248 |
| [ 0.576973] KPI: Bootloader end count = 113766 |
| [ 0.576982] KPI: Bootloader display count = 77262 |
| [ 0.576991] KPI: Bootloader load kernel count = 2830 |
| [ 0.577000] KPI: Kernel MPM timestamp = 141971 |
| [ 0.577009] KPI: Kernel MPM Clock frequency = 32768 |
| [ 0.577036] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=65536 |
| [ 0.577036] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=2990009489 |
| [ 0.578111] eldo2_8953: no parameters |
| [ 0.578430] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology |
| [ 0.578569] adv_vreg: no parameters |
| [ 0.579029] vdd_vreg: no parameters |
| [ 0.579572] vgaarb: loaded |
| [ 0.580691] SCSI subsystem initialized |
| [ 0.581621] usbcore: registered new interface driver usbfs |
| [ 0.581703] usbcore: registered new interface driver hub |
| [ 0.581938] usbcore: registered new device driver usb |
| [ 0.582675] media: Linux media interface: v0.10 |
| [ 0.582745] Linux video capture interface: v2.00 |
| [ 0.582876] EDAC MC: Ver: 3.0.0 |
| [ 0.620283] cpufreq: driver msm up and running |
| [ 0.620691] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0 |
| [ 0.620877] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 |
| [ 0.621076] ION heap system created |
| [ 0.621169] ION heap mm created at 0x00000000f6800000 with size 9800000 |
| [ 0.621182] ION heap qsecom created at 0x00000000f5800000 with size 1000000 |
| [ 0.621460] msm_bus_fabric_init_driver |
| [ 0.622314] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048 |
| [ 0.632032] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot |
| [ 0.632052] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) |
| [ 0.632207] input: qpnp_pon as /devices/virtual/input/input0 |
| [ 0.632782] pon_spare_reg: no parameters |
| [ 0.632864] qcom,qpnp-power-on qpnp-power-on-14: No PON config. specified |
| [ 0.632913] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot |
| [ 0.632929] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) |
| [ 0.633106] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0 |
| [ 0.633202] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0 |
| [ 0.633794] ipa ipa2_uc_state_check:296 uC interface not initialized |
| [ 0.633801] ipa ipa_sps_irq_control_all:938 EP (2) not allocated. |
| [ 0.633807] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. |
| [ 0.635167] sps:BAM 0x0000000007904000 is registered. |
| [ 0.635605] sps:BAM 0x0000000007904000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20 |
| [ 0.638502] IPA driver initialization was successful. |
| [ 0.639413] gdsc_venus: no parameters |
| [ 0.639677] gdsc_mdss: no parameters |
| [ 0.639949] gdsc_jpeg: no parameters |
| [ 0.640391] gdsc_vfe: no parameters |
| [ 0.640829] gdsc_vfe1: no parameters |
| [ 0.641080] gdsc_cpp: no parameters |
| [ 0.641295] gdsc_oxili_gx: no parameters |
| [ 0.641373] gdsc_oxili_gx: supplied by msm_gfx_ldo |
| [ 0.641594] gdsc_venus_core0: fast normal |
| [ 0.641806] gdsc_oxili_cx: no parameters |
| [ 0.641978] gdsc_usb30: no parameters |
| [ 0.642910] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL |
| [ 0.643595] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully |
| [ 0.643621] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL |
| [ 0.644743] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock |
| [ 0.645207] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully |
| [ 0.645638] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001d80000, with 21 ctx banks |
| [ 0.651488] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0 |
| [ 0.651637] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1 |
| [ 0.651776] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2 |
| [ 0.651917] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3 |
| [ 0.652064] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4 |
| [ 0.652210] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5 |
| [ 0.652351] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6 |
| [ 0.652518] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8 |
| [ 0.652683] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9 |
| [ 0.652854] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10 |
| [ 0.653020] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11 |
| [ 0.653190] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15 |
| [ 0.653355] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16 |
| [ 0.653524] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17 |
| [ 0.653691] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18 |
| [ 0.653862] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19 |
| [ 0.654029] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20 |
| [ 0.654197] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21 |
| [ 0.654366] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22 |
| [ 0.654535] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24 |
| [ 0.654704] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23 |
| [ 0.656726] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000 |
| [ 0.656753] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000 |
| [ 0.656773] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000 |
| [ 0.658751] Advanced Linux Sound Architecture Driver Initialized. |
| [ 0.659538] Bluetooth: ffffffc04eec7cf8 |
| [ 0.659562] NET: Registered protocol family 31 |
| [ 0.659568] Bluetooth: ffffffc04eec7cf8 |
| [ 0.659577] Bluetooth: ffffffc04eec7cd8Bluetooth: ffffffc04eec7ca8 |
| [ 0.659608] Bluetooth: ffffffc04eec7cb8<6>[ 0.659934] cfg80211: Calling CRDA to update world regulatory domain |
| [ 0.659952] cfg80211: World regulatory domain updated: |
| [ 0.659957] cfg80211: DFS Master region: unset |
| [ 0.659961] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [ 0.659969] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.659975] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.659981] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.659986] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.659992] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.659997] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.660003] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 0.660008] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [ 0.660131] pcie:pcie_init. |
| [ 0.661591] ibb_reg: 4600 <--> 6000 mV at 5500 mV |
| [ 0.661857] lab_reg: 4600 <--> 6000 mV at 5500 mV |
| [ 0.662483] Switched to clocksource arch_sys_counter |
| [ 0.698566] bcl_peripheral:bcl_perph_init BCL Initialized |
| [ 0.700353] NET: Registered protocol family 2 |
| [ 0.700745] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.700904] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.701219] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.701261] TCP: reno registered |
| [ 0.701269] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.701319] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.701488] NET: Registered protocol family 1 |
| [ 0.701515] PCI: CLS 0 bytes, default 128 |
| [ 0.703741] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks. |
| [ 0.704189] Trying to unpack rootfs image as initramfs... |
| [ 0.763323] Freeing initrd memory: 2172K (ffffffc003600000 - ffffffc00381f000) |
| [ 0.767307] futex hash table entries: 2048 (order: 6, 262144 bytes) |
| [ 0.767392] Initialise system trusted keyring |
| [ 0.767438] audit: initializing netlink subsys (disabled) |
| [ 0.767482] audit: type=2000 audit(0.759:1): initialized |
| [ 0.767840] vmscan: error setting kswapd cpu affinity mask |
| [ 0.771428] zbud: loaded |
| [ 0.771763] VFS: Disk quotas dquot_6.5.2 |
| [ 0.771855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.772936] exFAT: Version 1.2.9 |
| [ 0.773764] fuse init (API version 7.23) |
| [ 0.773979] SELinux: Registering netfilter hooks |
| [ 0.775855] Key type asymmetric registered |
| [ 0.775863] Asymmetric key parser 'x509' registered |
| [ 0.775962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.775972] io scheduler noop registered |
| [ 0.775979] io scheduler deadline registered |
| [ 0.776116] io scheduler cfq registered (default) |
| [ 0.780238] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x2 (ok) |
| [ 0.780359] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010 |
| [ 0.780391] msm_dba_helper_i2c_read: i2c read failed |
| [ 0.780398] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1 |
| [ 0.780402] adv7533_probe: Failed to read chip rev |
| [ 0.780456] adv7533: probe of 2-0039 failed with error -5 |
| [ 0.780768] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found |
| [ 0.780777] mdss_mdp_probe+0x228/0x10dc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed |
| [ 0.781193] mdss_mdp_irq_clk_register: unable to get clk: lut_clk |
| [ 0.781754] No change in context(0==0), skip |
| [ 0.782433] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 |
| [ 0.782451] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1 |
| [ 0.782457] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2 |
| [ 0.782470] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3 |
| [ 0.782484] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 |
| [ 0.782494] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read |
| [ 0.782579] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read |
| [ 0.782841] xlog_status: enable:1, panic:1, dump:2 |
| [ 0.783478] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100 |
| [ 0.785170] mdss_smmu_util_parse_dt_clock: clocks are not defined |
| [ 0.785216] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! |
| [ 0.785239] mdss_smmu_util_parse_dt_clock: clocks are not defined |
| [ 0.785271] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! |
| [ 0.787121] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 |
| [ 0.787613] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_nt35596_tianma_fhd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_nt35596_tianma_fhd_video |
| [ 0.787619] liujia print panel name = 0 |
| [ 0.787673] mdss_dsi_panel_init: Panel Name = nt35596 tianma fhd video mode dsi panel |
| [ 0.787810] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35596_tianma_fhd_video" (ffffffc04eec7268) |
| [ 0.787827] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command |
| [ 0.787836] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command |
| [ 0.787841] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: |
| [ 0.788120] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cold_gamma_fb-command |
| [ 0.788129] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-warm_gamma_fb-command |
| [ 0.788137] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-CE_on_fb-command |
| [ 0.788145] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-CABC_on_fb-command |
| [ 0.788154] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cold_slpout-command |
| [ 0.788163] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-warm_slpout-command |
| [ 0.788171] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-default_slpout-command |
| [ 0.788195] mdss_dsi_parse_panel_features: ulps feature disabled |
| [ 0.788202] mdss_dsi_parse_panel_features: ulps during suspend feature disabled |
| [ 0.788209] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 |
| [ 0.788364] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator |
| [ 0.788601] mdss_dsi_parse_ctrl_params:3921 Unable to read qcom,display-id, data=0000000000000000,len=20 |
| [ 0.788614] mdss_dsi_parse_gpio_params: bklt_en gpio not specified |
| [ 0.788667] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found |
| [ 0.788676] mdss_dsi_retrieve_ctrl_resources+0x178/0x1fc->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed |
| [ 0.788683] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80017ee000 ctrl_size=400 phy_base=ffffff80017f4400 phy_size=580 |
| [ 0.788699] init_te_irq:liujia irq = 31 |
| [ 0.788828] dsi_panel_device_register: Continuous splash enabled |
| [ 0.789106] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0 |
| [ 0.790418] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2 |
| [ 0.790564] mdss_dsi_status_init: DSI status check interval:2000 |
| [ 0.791460] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel |
| [ 0.791992] mdss_fb_probe: fb0: split_mode:0 left:0 right:0 |
| [ 0.792624] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully! |
| [ 0.792936] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 |
| [ 0.793022] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully! |
| [ 0.793095] mdss_mdp_splash_parse_dt: splash mem child node is not present |
| [ 0.794037] spcom [spcom_init]: spcom driver Ver 1.0 23-Nov-2015. |
| [ 0.795834] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR |
| [ 0.795860] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR |
| [ 0.799475] In memshare_probe, Memshare probe success |
| [ 0.801337] msm_rpm_log_probe: OK |
| [ 0.802466] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped. |
| [ 0.804251] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. |
| [ 0.807182] msm_serial_hs module loaded |
| [ 0.816536] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0 |
| [ 0.822285] brd: module loaded |
| [ 0.823974] loop: module loaded |
| [ 0.824248] zram: Created 1 device(s) ... |
| [ 0.824652] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000 |
| [ 0.824678] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE |
| [ 0.824686] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem |
| [ 0.824693] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 |
| [ 0.825232] scm_call failed: func id 0x70000006, ret: -1, syscall returns: 0x0, 0x0, 0x0 |
| [ 0.825238] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0 |
| [ 0.826560] i2c-core: driver [tabla-i2c-core] using legacy suspend method |
| [ 0.826566] i2c-core: driver [tabla-i2c-core] using legacy resume method |
| [ 0.826639] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method |
| [ 0.826644] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method |
| [ 0.826720] i2c-core: driver [tasha-i2c-core] using legacy suspend method |
| [ 0.826724] i2c-core: driver [tasha-i2c-core] using legacy resume method |
| [ 0.827234] nq-nci 5-0028: ese GPIO <OPTIONAL> error getting from OF node |
| [ 0.827308] nq-nci 5-0028: nqx_probe: ese gpio not provided |
| [ 0.880233] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xd (ok) |
| [ 0.880363] i2c-msm-v2 7af5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090 |
| [ 0.880401] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send Error |
| [ 0.880407] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available |
| [ 0.880479] ------------[ cut here ]------------ |
| [ 0.880489] WARNING: CPU: 5 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x3c/0x60() |
| [ 0.880493] invalid GPIO -22 |
| [ 0.880497] Modules linked in: |
| [ 0.880508] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 |
| [ 0.880513] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) |
| [ 0.880518] Call trace: |
| [ 0.880526] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c |
| [ 0.880532] [<ffffffc00008a294>] show_stack+0x20/0x28 |
| [ 0.880540] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 |
| [ 0.880547] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 |
| [ 0.880552] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac |
| [ 0.880557] [<ffffffc0003ce138>] gpio_to_desc+0x3c/0x60 |
| [ 0.880564] [<ffffffc0003d05a4>] gpio_free+0x20/0x30 |
| [ 0.880571] [<ffffffc000624d5c>] nqx_probe+0x7c8/0x874 |
| [ 0.880579] [<ffffffc0007cea88>] i2c_device_probe+0xc4/0xf8 |
| [ 0.880586] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c |
| [ 0.880592] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 |
| [ 0.880598] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc |
| [ 0.880604] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 |
| [ 0.880609] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 |
| [ 0.880615] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 |
| [ 0.880621] [<ffffffc0007cdee4>] i2c_register_driver+0x58/0xb8 |
| [ 0.880627] [<ffffffc00150a3a8>] nqx_dev_init+0x18/0x20 |
| [ 0.880633] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 |
| [ 0.880640] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 |
| [ 0.880647] [<ffffffc000db797c>] kernel_init+0x20/0xe0 |
| [ 0.880652] ---[ end trace 0af8bdd5bcf4f303 ]--- |
| [ 0.880664] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware |
| [ 0.880955] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 |
| [ 0.881482] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000 |
| [ 0.881491] qce 720000.qcedev: CE device = 0x0 |
| [ 0.881491] , IO base, CE = 0xffffff8001fc0000 |
| [ 0.881491] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 |
| [ 0.881491] IO base BAM = 0x (null) |
| [ 0.881491] BAM IRQ 193 |
| [ 0.881491] Engines Availability = 0x2010853 |
| [ 0.881688] sps:BAM 0x0000000000704000 is registered. |
| [ 0.881854] sps:BAM 0x0000000000704000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:8 |
| [ 0.882060] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193 |
| [ 0.884933] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 |
| [ 0.885706] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000 |
| [ 0.885715] qcrypto 720000.qcrypto: CE device = 0x0 |
| [ 0.885715] , IO base, CE = 0xffffff8002100000 |
| [ 0.885715] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 |
| [ 0.885715] IO base BAM = 0x (null) |
| [ 0.885715] BAM IRQ 193 |
| [ 0.885715] Engines Availability = 0x2010853 |
| [ 0.885976] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193 |
| [ 0.888234] qcrypto 720000.qcrypto: qcrypto-ecb-aes |
| [ 0.888318] qcrypto 720000.qcrypto: qcrypto-cbc-aes |
| [ 0.888396] qcrypto 720000.qcrypto: qcrypto-ctr-aes |
| [ 0.888473] qcrypto 720000.qcrypto: qcrypto-ecb-des |
| [ 0.888551] qcrypto 720000.qcrypto: qcrypto-cbc-des |
| [ 0.888629] qcrypto 720000.qcrypto: qcrypto-ecb-3des |
| [ 0.888706] qcrypto 720000.qcrypto: qcrypto-cbc-3des |
| [ 0.888785] qcrypto 720000.qcrypto: qcrypto-xts-aes |
| [ 0.888863] qcrypto 720000.qcrypto: qcrypto-sha1 |
| [ 0.888940] qcrypto 720000.qcrypto: qcrypto-sha256 |
| [ 0.889019] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes |
| [ 0.889098] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des |
| [ 0.889176] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des |
| [ 0.889260] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes |
| [ 0.889340] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des |
| [ 0.889419] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des |
| [ 0.889496] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 |
| [ 0.889579] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 |
| [ 0.889658] qcrypto 720000.qcrypto: qcrypto-aes-ccm |
| [ 0.889735] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm |
| [ 0.890703] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed |
| [ 0.890824] ICE IRQ = 194 |
| [ 0.891697] SCSI Media Changer driver v0.25 |
| [ 0.892998] tun: Universal TUN/TAP device driver, 1.6 |
| [ 0.893003] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| [ 0.893067] PPP generic driver version 2.4.2 |
| [ 0.893145] PPP BSD Compression module registered |
| [ 0.893154] PPP Deflate Compression module registered |
| [ 0.893171] PPP MPPE Compression module registered |
| [ 0.893183] NET: Registered protocol family 24 |
| [ 0.893746] wcnss_wlan probed in built-in mode |
| [ 0.894365] usbcore: registered new interface driver asix |
| [ 0.894441] usbcore: registered new interface driver ax88179_178a |
| [ 0.894475] usbcore: registered new interface driver cdc_ether |
| [ 0.894510] usbcore: registered new interface driver net1080 |
| [ 0.894544] usbcore: registered new interface driver cdc_subset |
| [ 0.894578] usbcore: registered new interface driver zaurus |
| [ 0.894720] usbcore: registered new interface driver cdc_ncm |
| [ 0.895132] msm_sharedmem: sharedmem_register_qmi: qmi init successful |
| [ 0.895621] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 |
| [ 0.895628] hyp_assign_table: Failed to assign memory protection, ret = -5 |
| [ 0.895636] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f4900000 size=1572864 err=-5 |
| [ 0.895730] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' |
| [ 0.901028] msm-dwc3 7000000.ssusb: unable to get dbm device |
| [ 0.902366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.902646] ehci-pci: EHCI PCI platform driver |
| [ 0.902685] ehci-msm: Qualcomm On-Chip EHCI Host Controller |
| [ 0.903006] usbcore: registered new interface driver cdc_acm |
| [ 0.903011] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 0.903057] usbcore: registered new interface driver usb-storage |
| [ 0.903088] usbcore: registered new interface driver ums-alauda |
| [ 0.903118] usbcore: registered new interface driver ums-cypress |
| [ 0.903149] usbcore: registered new interface driver ums-datafab |
| [ 0.903179] usbcore: registered new interface driver ums-freecom |
| [ 0.903209] usbcore: registered new interface driver ums-isd200 |
| [ 0.903242] usbcore: registered new interface driver ums-jumpshot |
| [ 0.903273] usbcore: registered new interface driver ums-karma |
| [ 0.903305] usbcore: registered new interface driver ums-sddr09 |
| [ 0.903337] usbcore: registered new interface driver ums-sddr55 |
| [ 0.903368] usbcore: registered new interface driver ums-usbat |
| [ 0.903446] usbcore: registered new interface driver usbserial |
| [ 0.903482] usbcore: registered new interface driver usb_ehset_test |
| [ 0.903983] gbridge_init: gbridge_init successs. |
| [ 0.904234] mousedev: PS/2 mouse device common for all mice |
| [ 0.904391] usbcore: registered new interface driver xpad |
| [ 0.904400] tony_test:[ft5435_ts_init] |
| [ 0.904815] ~~~~~ ft5435_ts_probe start |
| [ 0.904820] [ft5435_ts_probe]CONFIG_FB is defined |
| [ 0.904824] [ft5435_ts_probe]CONFIG_PM is defined |
| [ 0.904863] [ft5435_get_dt_vkey]000 |
| [ 0.904867] [ft5435_get_dt_vkey]111 |
| [ 0.904871] [ft5435_get_dt_vkey]222 |
| [ 0.904875] [ft5435_get_dt_vkey]333 |
| [ 0.904881] [FTS]keycode = 172, x= 500, y=2040 |
| [ 0.904887] [FTS]keycode = 139, x= 200, y=2040 |
| [ 0.904893] [FTS]keycode = 158, x= 800, y=2040 |
| [ 0.904897] [ft5435_get_dt_vkey]5555 |
| [ 0.905030] input: ft5435_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1 |
| [ 1.150267] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok) |
| [ 1.150465] ft5435_ts 3-0038: Device ID = 0x54 |
| [ 1.150728] ------------[ cut here ]------------ |
| [ 1.150740] WARNING: CPU: 0 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/base/core.c:551 device_create_file+0xa4/0xb4() |
| [ 1.150745] Attribute set_cover_mode: read permission without 'show' |
| [ 1.150750] Modules linked in: |
| [ 1.150760] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 |
| [ 1.150765] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) |
| [ 1.150770] Call trace: |
| [ 1.150778] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c |
| [ 1.150784] [<ffffffc00008a294>] show_stack+0x20/0x28 |
| [ 1.150792] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 |
| [ 1.150799] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 |
| [ 1.150804] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac |
| [ 1.150810] [<ffffffc0005c8a88>] device_create_file+0xa4/0xb4 |
| [ 1.150817] [<ffffffc000791f1c>] ft5435_ts_probe+0xd80/0x14ac |
| [ 1.150825] [<ffffffc0007cea88>] i2c_device_probe+0xc4/0xf8 |
| [ 1.150832] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c |
| [ 1.150838] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 |
| [ 1.150843] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc |
| [ 1.150849] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 |
| [ 1.150854] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 |
| [ 1.150860] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 |
| [ 1.150866] [<ffffffc0007cdee4>] i2c_register_driver+0x58/0xb8 |
| [ 1.150872] [<ffffffc00150eb60>] ft5435_ts_init+0xb8/0xc4 |
| [ 1.150878] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 |
| [ 1.150885] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 |
| [ 1.150892] [<ffffffc000db797c>] kernel_init+0x20/0xe0 |
| [ 1.150897] ---[ end trace 0af8bdd5bcf4f304 ]--- |
| [ 1.151104] ft5435_ts 3-0038: report rate = 110Hz |
| [ 1.151679] ft5435_ts 3-0038: Firmware version = 10.0.0 |
| [ 1.151827] [Fu]fw_vendor_id=0x3b |
| [ 1.151831] upgrade,fts_fw_vendor_id=0x3b |
| [ 1.151837] ft5435_fw_upgrade_by_array_data, suspended=0 |
| [ 1.151843] ft5435_ts 3-0038: Current firmware: 0x0a.0.0 |
| [ 1.151849] ft5435_ts 3-0038: New firmware: 0x0a.0.0 |
| [ 1.151855] ft5435_ts 3-0038: Exiting fw upgrade... |
| [ 1.151860] ft5435_fw_upgrade_by_array_data done |
| [ 1.151869] [fts]ft5435_fw_LockDownInfo_get_from_boot, fw_vendor_id=0x3b |
| [ 1.570274] ft5435_fw_LockDownInfo_get_from_boot,FTS_UPGRADE_LOOP ok is i = 0 |
| [ 1.610293] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31,j=0 |
| [ 1.610299] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x36,j=1 |
| [ 1.610303] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x32,j=2 |
| [ 1.610308] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01,j=3 |
| [ 1.610312] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0xc6,j=4 |
| [ 1.610317] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01,j=5 |
| [ 1.610322] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31,j=6 |
| [ 1.610326] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01,j=7 |
| [ 1.610331] ft5435_fw_LockDownInfo_get_from_boot: reset the tp |
| [ 1.920040] tpd_probe, ft5x46_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=31363201c6013101 |
| [ 1.920064] ft5435_ts 3-0038: Create proc entry success! |
| [ 1.920179] ~~~~~ ft5435_ts_probe end |
| [ 1.920219] [ TSP ] ist30xx_init() |
| [ 1.920484] [ TSP ] ### IMAGIS probe(ver:3.0.0.0, addr:0x50) ### |
| [ 1.920498] [ TSP ] ##### Device tree ##### |
| [ 1.920502] [ TSP ] reset gpio: 64 |
| [ 1.920507] [ TSP ] irq gpio: 65 |
| [ 1.920511] [ TSP ] ist30xx_request_gpio |
| [ 1.920517] [ TSP ] unable to request reset gpio: 64 |
| [ 1.920523] [ TSP ] Error, ist30xx init driver |
| [ 1.920554] <<-GTP-INFO->> GTP driver installing... |
| [ 1.920998] <<-GTP-INFO->> GTP Driver Version: V2.4<2014/11/28> |
| [ 1.921003] <<-GTP-INFO->> GTP I2C Address: 0x14 |
| [ 1.921156] <<-GTP-ERROR->> Failed to request GPIO:65, ERRNO:-16 |
| [ 1.921164] <<-GTP-INFO->> gtp_request_io_port : ret = -19 |
| [ 1.921164] |
| [ 1.921170] <<-GTP-ERROR->> GTP request IO port failed. |
| [ 1.921174] <<-GTP-INFO->> destroy_workqueue : goodix_wq |
| [ 1.921237] <<-GTP-INFO->> destroy_workqueue : gtp_esd_check_workqueue |
| [ 1.921316] <<-GTP-INFO->> wmy i2c_add_driver, ret = 0 |
| [ 1.921325] gf:gf_init, entry |
| [ 1.921329] --------gf_init start.-------- |
| [ 1.921798] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio135" for function "blsp_spi6" |
| [ 1.921807] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio136" for function "blsp_spi6" |
| [ 1.921816] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio137" for function "blsp_spi6" |
| [ 1.921825] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio138" for function "blsp_spi6" |
| [ 1.921920] gf:gf_probe, entry |
| [ 1.921925] --------gf_probe start.-------- |
| [ 1.922086] input: gf3208 as /devices/virtual/input/input2 |
| [ 1.922142] --------gf_probe end---OK.-------- |
| [ 1.922284] status = 0x0 |
| [ 1.922288] gf:gf_init, exit |
| [ 1.922292] --------gf_init end---OK.-------- |
| [ 1.922889] fpc1020 soc:fpc1020: fpc1020_probe: ok |
| [ 1.922990] fpc1020_init OK |
| [ 1.923698] input: hbtp_vm as /devices/virtual/input/input3 |
| [ 1.924416] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0 |
| [ 1.924572] i2c /dev entries driver |
| [ 1.925160] lirc_dev: IR Remote Control driver registered, major 233 |
| [ 1.925168] IR NEC protocol handler initialized |
| [ 1.925177] IR RC5(x/sz) protocol handler initialized |
| [ 1.925185] IR RC6 protocol handler initialized |
| [ 1.925192] IR JVC protocol handler initialized |
| [ 1.925200] IR Sony protocol handler initialized |
| [ 1.925208] IR SANYO protocol handler initialized |
| [ 1.925215] IR Sharp protocol handler initialized |
| [ 1.925224] IR LIRC bridge handler initialized |
| [ 1.925232] IR XMP protocol handler initialized |
| [ 1.929996] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000 |
| [ 1.930426] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000 |
| [ 1.930679] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000 |
| [ 1.932994] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts |
| [ 1.939966] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts |
| [ 1.940999] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts |
| [ 1.941992] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts |
| [ 1.942548] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed |
| [ 1.942555] msm_actuator_platform_probe:1934 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl |
| [ 1.942627] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22 |
| [ 1.943325] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 1.948839] msm_camera_config_single_vreg : can't find sub reg name |
| [ 1.957788] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 1.957813] read_eeprom_memory 157 |
| [ 1.958251] msm_cci_irq:1712 MASTER_0 error 0x10000000 |
| [ 1.958279] msm_cci_i2c_read:906 read_words = 0, exp words = 1 |
| [ 1.958285] msm_cci_i2c_read_bytes:989 failed rc -22 |
| [ 1.958290] read_eeprom_memory 173 error |
| [ 1.958295] msm_eeprom_platform_probe read_eeprom_memory failed |
| [ 1.966524] msm_camera_config_single_vreg : can't find sub reg name |
| [ 1.970734] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@0 failed with error -22 |
| [ 1.971171] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 1.977603] msm_camera_config_single_vreg : can't find sub reg name |
| [ 1.986648] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 1.986672] read_eeprom_memory 157 |
| [ 1.987258] qcom,slave-addr = 0xB0 |
| [ 1.987751] qcom,slave-addr = 0xB0 |
| [ 1.988244] qcom,slave-addr = 0xB0 |
| [ 1.988917] qcom,slave-addr = 0xB0 |
| [ 1.989771] qcom,slave-addr = 0xB0 |
| [ 1.990266] qcom,slave-addr = 0xB0 |
| [ 1.991209] qcom,slave-addr = 0xB0 |
| [ 1.992152] qcom,slave-addr = 0xB0 |
| [ 2.210241] qcom,slave-addr = 0xB0 |
| [ 2.329799] msm_camera_config_single_vreg : can't find sub reg name |
| [ 2.334483] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 2.340871] msm_camera_config_single_vreg : can't find sub reg name |
| [ 2.349914] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 2.349938] read_eeprom_memory 157 |
| [ 2.350527] qcom,slave-addr = 0xB0 |
| [ 2.351110] qcom,slave-addr = 0xB0 |
| [ 2.351783] qcom,slave-addr = 0xB0 |
| [ 2.352636] qcom,slave-addr = 0xB0 |
| [ 2.353670] qcom,slave-addr = 0xB0 |
| [ 2.571765] qcom,slave-addr = 0xB0 |
| [ 2.682519] qcom,slave-addr = 0xB0 |
| [ 2.691420] msm_camera_config_single_vreg : can't find sub reg name |
| [ 2.696150] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 2.717164] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 2.717186] read_eeprom_memory 157 |
| [ 2.717623] msm_cci_irq:1718 MASTER_1 error 0x40000000 |
| [ 2.717651] msm_cci_i2c_read:906 read_words = 0, exp words = 1 |
| [ 2.717656] msm_cci_i2c_read_bytes:989 failed rc -22 |
| [ 2.717661] read_eeprom_memory 173 error |
| [ 2.717666] msm_eeprom_platform_probe read_eeprom_memory failed |
| [ 2.737052] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@3 failed with error -22 |
| [ 2.737497] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 2.759146] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 2.759169] read_eeprom_memory 157 |
| [ 2.759605] msm_cci_irq:1718 MASTER_1 error 0x40000000 |
| [ 2.759634] msm_cci_i2c_read:906 read_words = 0, exp words = 1 |
| [ 2.759639] msm_cci_i2c_read_bytes:989 failed rc -22 |
| [ 2.759644] read_eeprom_memory 173 error |
| [ 2.759649] msm_eeprom_platform_probe read_eeprom_memory failed |
| [ 2.779026] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@4 failed with error -22 |
| [ 2.779471] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 2.801117] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 2.801140] read_eeprom_memory 157 |
| [ 2.980887] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 2.987291] msm_camera_config_single_vreg : can't find sub reg name |
| [ 2.996332] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 2.996355] read_eeprom_memory 157 |
| [ 2.996941] qcom,slave-addr = 0xB0 |
| [ 3.123326] qcom,slave-addr = 0xB0 |
| [ 3.249702] qcom,slave-addr = 0xB0 |
| [ 3.376070] qcom,slave-addr = 0xB0 |
| [ 3.502441] qcom,slave-addr = 0xB0 |
| [ 3.628817] qcom,slave-addr = 0xB0 |
| [ 3.755194] qcom,slave-addr = 0xB0 |
| [ 3.881565] qcom,slave-addr = 0xB0 |
| [ 4.016175] msm_camera_config_single_vreg : can't find sub reg name |
| [ 4.020876] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 4.027283] msm_camera_config_single_vreg : can't find sub reg name |
| [ 4.036321] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 4.036345] read_eeprom_memory 157 |
| [ 4.036781] msm_cci_irq:1712 MASTER_0 error 0x10000000 |
| [ 4.036807] msm_cci_i2c_read:906 read_words = 0, exp words = 1 |
| [ 4.036813] msm_cci_i2c_read_bytes:989 failed rc -22 |
| [ 4.036818] read_eeprom_memory 173 error |
| [ 4.036823] msm_eeprom_platform_probe read_eeprom_memory failed |
| [ 4.044190] msm_camera_config_single_vreg : can't find sub reg name |
| [ 4.048403] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@7 failed with error -22 |
| [ 4.048811] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 4.055205] msm_camera_config_single_vreg : can't find sub reg name |
| [ 4.064246] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 4.064269] read_eeprom_memory 157 |
| [ 4.064856] qcom,slave-addr = 0xB0 |
| [ 4.191243] qcom,slave-addr = 0xB0 |
| [ 4.317610] qcom,slave-addr = 0xB0 |
| [ 4.443980] qcom,slave-addr = 0xB0 |
| [ 4.570352] qcom,slave-addr = 0xB0 |
| [ 4.696730] qcom,slave-addr = 0xB0 |
| [ 4.823108] qcom,slave-addr = 0xB0 |
| [ 4.949478] qcom,slave-addr = 0xB0 |
| [ 5.084081] msm_camera_config_single_vreg : can't find sub reg name |
| [ 5.088781] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 |
| [ 5.095186] msm_camera_config_single_vreg : can't find sub reg name |
| [ 5.104231] msm_cci_init:1382: hw_version = 0x10020005 |
| [ 5.104254] read_eeprom_memory 157 |
| [ 5.104691] msm_cci_irq:1712 MASTER_0 error 0x10000000 |
| [ 5.104719] msm_cci_i2c_read:906 read_words = 0, exp words = 1 |
| [ 5.104724] msm_cci_i2c_read_bytes:989 failed rc -22 |
| [ 5.104729] read_eeprom_memory 173 error |
| [ 5.104734] msm_eeprom_platform_probe read_eeprom_memory failed |
| [ 5.112958] msm_camera_config_single_vreg : can't find sub reg name |
| [ 5.117172] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@9 failed with error -22 |
| [ 5.124664] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x40030003 |
| [ 5.124674] MSM-CPP cpp_init_hardware:881 stream_cnt:0 |
| [ 5.136227] __msm_jpeg_init:1537] Jpeg Device id 0 |
| [ 5.140499] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17 |
| [ 5.144216] thermal thermal_zone1: failed to read out thermal zone 1 |
| [ 5.144414] thermal thermal_zone2: failed to read out thermal zone 2 |
| [ 5.144592] thermal thermal_zone3: failed to read out thermal zone 3 |
| [ 5.145089] qpnp_vadc_read: no vadc_chg_vote found |
| [ 5.145095] qpnp_vadc_get_temp: VADC read error with -22 |
| [ 5.145100] thermal thermal_zone4: failed to read out thermal zone 4 |
| [ 5.166463] device-mapper: uevent: version 1.0.3 |
| [ 5.166616] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com |
| [ 5.166704] device-mapper: req-crypt: dm-req-crypt successfully initalized. |
| [ 5.166704] |
| [ 5.167554] sdhci: Secure Digital Host Controller Interface driver |
| [ 5.167558] sdhci: Copyright(c) Pierre Ossman |
| [ 5.167566] sdhci-pltfm: SDHCI platform and OF driver helper |
| [ 5.168160] qcom_ice_get_pdevice: found ice device ffffffc0acc62800 |
| [ 5.168165] qcom_ice_get_pdevice: matching platform device ffffffc0ae5ad400 |
| [ 5.172915] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001cf0000 |
| [ 5.173310] sdhci_msm 7824900.sdhci: No vmmc regulator found |
| [ 5.173317] sdhci_msm 7824900.sdhci: No vqmmc regulator found |
| [ 5.173622] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode |
| [ 5.203325] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled |
| [ 5.222568] sdhci_msm 7864900.sdhci: No vmmc regulator found |
| [ 5.222575] sdhci_msm 7864900.sdhci: No vqmmc regulator found |
| [ 5.222897] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode |
| [ 5.253374] qcom,leds-qpnp: probe of leds-qpnp-21 failed with error -10 |
| [ 5.258090] tz_log 8600720.tz-log: Hyp log service is not supported |
| [ 5.259032] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 5.259378] usbcore: registered new interface driver usbhid |
| [ 5.259383] usbhid: USB HID core driver |
| [ 5.259678] ashmem: initialized |
| [ 5.260277] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm |
| [ 5.262641] mmc0: Out-of-interrupt timeout is 50[ms] |
| [ 5.262648] mmc0: BKOPS_EN equals 0x2 |
| [ 5.262653] mmc0: eMMC FW version: 0xa5 |
| [ 5.262657] mmc0: CMDQ supported: depth: 32 |
| [ 5.262662] mmc0: cache barrier support 1 flush policy 1 |
| [ 5.268285] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. |
| [ 5.273413] devfreq soc:qcom,cpubw: Couldn't update frequency transition information. |
| [ 5.273564] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information. |
| [ 5.274292] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24 |
| [ 5.274550] desc-base: 0xffffff8001d5e000 trans-base: 0xffffff8001e81000 |
| [ 5.274550] desc_dma 0xf4479000 trans_dma: 0xf4880000 |
| [ 5.274566] mmc0: CMDQ enabled on card |
| [ 5.274576] mmc0: new HS400 MMC card at address 0001 |
| [ 5.274935] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc0ac082200) |
| [ 5.274944] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc0ac082208) |
| [ 5.275046] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB |
| [ 5.275139] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB |
| [ 5.275160] coresight-fuse a601c.fuse: Fuse initialized |
| [ 5.275514] coresight-cti: probe of 6010000.cti failed with error -1 |
| [ 5.275540] coresight-cti: probe of 6011000.cti failed with error -1 |
| [ 5.275565] coresight-cti: probe of 6012000.cti failed with error -1 |
| [ 5.275589] coresight-cti: probe of 6013000.cti failed with error -1 |
| [ 5.275614] coresight-cti: probe of 6014000.cti failed with error -1 |
| [ 5.275638] coresight-cti: probe of 6015000.cti failed with error -1 |
| [ 5.275663] coresight-cti: probe of 6016000.cti failed with error -1 |
| [ 5.275687] coresight-cti: probe of 6017000.cti failed with error -1 |
| [ 5.275711] coresight-cti: probe of 6018000.cti failed with error -1 |
| [ 5.275736] coresight-cti: probe of 6019000.cti failed with error -1 |
| [ 5.275761] coresight-cti: probe of 601a000.cti failed with error -1 |
| [ 5.275785] coresight-cti: probe of 601b000.cti failed with error -1 |
| [ 5.275810] coresight-cti: probe of 601c000.cti failed with error -1 |
| [ 5.275835] coresight-cti: probe of 601d000.cti failed with error -1 |
| [ 5.275859] coresight-cti: probe of 601e000.cti failed with error -1 |
| [ 5.275885] coresight-cti: probe of 601f000.cti failed with error -1 |
| [ 5.275909] coresight-cti: probe of 6198000.cti failed with error -1 |
| [ 5.275934] coresight-cti: probe of 6199000.cti failed with error -1 |
| [ 5.275958] coresight-cti: probe of 619a000.cti failed with error -1 |
| [ 5.275982] coresight-cti: probe of 619b000.cti failed with error -1 |
| [ 5.276007] coresight-cti: probe of 61b8000.cti failed with error -1 |
| [ 5.276031] coresight-cti: probe of 61b9000.cti failed with error -1 |
| [ 5.276056] coresight-cti: probe of 61ba000.cti failed with error -1 |
| [ 5.276081] coresight-cti: probe of 61bb000.cti failed with error -1 |
| [ 5.276105] coresight-cti: probe of 6128000.cti failed with error -1 |
| [ 5.276129] coresight-cti: probe of 6124000.cti failed with error -1 |
| [ 5.276154] coresight-cti: probe of 6134000.cti failed with error -1 |
| [ 5.276179] coresight-cti: probe of 6139000.cti failed with error -1 |
| [ 5.276204] coresight-cti: probe of 613c000.cti failed with error -1 |
| [ 5.276228] coresight-cti: probe of 610c000.cti failed with error -1 |
| [ 5.276585] coresight-csr 6001000.csr: CSR initialized |
| [ 5.276937] coresight-tmc: probe of 6028000.tmc failed with error -1 |
| [ 5.277073] coresight-tmc 6027000.tmc: failed to get flush cti |
| [ 5.277079] coresight-tmc 6027000.tmc: failed to get reset cti |
| [ 5.277185] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 |
| [ 5.277186] coresight-tmc 6027000.tmc: TMC initialized |
| [ 5.278726] nidnt boot config: 0 |
| [ 5.279690] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode |
| [ 5.279779] coresight-tpiu 6020000.tpiu: TPIU initialized |
| [ 5.281140] mmc_ffu start,mid:144,name:HBG4a2,fw_ver:165 |
| [ 5.281146] mmc_ffu end |
| [ 5.281588] coresight-replicator 6026000.replicator: REPLICATOR initialized |
| [ 5.282002] coresight-stm: probe of 6002000.stm failed with error -1 |
| [ 5.282434] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized |
| [ 5.283202] usbcore: registered new interface driver snd-usb-audio |
| [ 5.297043] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa |
| [ 5.302088] u32 classifier |
| [ 5.302093] Actions configured |
| [ 5.302127] Netfilter messages via NETLINK v0.30. |
| [ 5.302174] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| [ 5.302513] ctnetlink v0.93: registering with nfnetlink. |
| [ 5.303056] xt_time: kernel timezone is -0000 |
| [ 5.303254] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 5.303390] arp_tables: (C) 2002 David S. Miller |
| [ 5.303431] TCP: cubic registered |
| [ 5.303439] Initializing XFRM netlink socket |
| [ 5.303772] NET: Registered protocol family 10 |
| [ 5.304505] mip6: Mobile IPv6 |
| [ 5.304528] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 5.304650] sit: IPv6 over IPv4 tunneling driver |
| [ 5.305002] NET: Registered protocol family 17 |
| [ 5.305024] NET: Registered protocol family 15 |
| [ 5.305057] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. |
| [ 5.305067] Ebtables v2.0 registered |
| [ 5.305163] Bluetooth: ffffffc04eec7cb8 |
| [ 5.305175] Bluetooth: ffffffc04eec7ca8Bluetooth: ffffffc04eec7ce8 |
| [ 5.305209] Bluetooth: ffffffc04eec7cc8Bluetooth: ffffffc04eec7cc8 |
| [ 5.305223] Bluetooth: ffffffc04eec7ca8Bluetooth: ffffffc04eec7d18 |
| [ 5.305239] Bluetooth: ffffffc04eec7cf8<6>[ 5.305277] l2tp_core: L2TP core driver, V2.0 |
| [ 5.305292] l2tp_ppp: PPPoL2TP kernel driver, V2.0 |
| [ 5.305300] l2tp_ip: L2TP IP encapsulation support (L2TPv3) |
| [ 5.305317] l2tp_netlink: L2TP netlink interface |
| [ 5.305343] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) |
| [ 5.305365] l2tp_debugfs: L2TP debugfs support |
| [ 5.305373] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) |
| [ 5.306052] NET: Registered protocol family 27 |
| [ 5.310680] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. |
| [ 5.312558] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. |
| [ 5.315534] sps:BAM 0x0000000007104000 is registered. |
| [ 5.318485] qpnp-smbcharger qpnp-smbcharger-18: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent! |
| [ 5.318638] smbcharger_charger_otg: no parameters |
| [ 5.318746] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0 last_enable 0 |
| [ 5.319323] ------------[ cut here ]------------ |
| [ 5.319337] WARNING: CPU: 7 PID: 140 at /home/work/mido-n-stable-build/kernel/msm-3.18/kernel/irq/manage.c:448 __enable_irq+0x4c/0x90() |
| [ 5.319342] Unbalanced enable for IRQ 259 |
| [ 5.319346] Modules linked in: |
| [ 5.319355] CPU: 7 PID: 140 Comm: kworker/7:1 Tainted: G W 3.18.31-perf-g489aada4 #1 |
| [ 5.319360] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) |
| [ 5.319369] Workqueue: events status_change_work |
| [ 5.319375] Call trace: |
| [ 5.319383] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c |
| [ 5.319389] [<ffffffc00008a294>] show_stack+0x20/0x28 |
| [ 5.319397] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 |
| [ 5.319403] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 |
| [ 5.319408] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac |
| [ 5.319414] [<ffffffc0000fb558>] __enable_irq+0x4c/0x90 |
| [ 5.319419] [<ffffffc0000fb620>] enable_irq+0x84/0xac |
| [ 5.319424] [<ffffffc0008e37c0>] status_change_work+0x16c/0xb88 |
| [ 5.319432] [<ffffffc0000bdd70>] process_one_work+0x264/0x440 |
| [ 5.319438] [<ffffffc0000be79c>] worker_thread+0x32c/0x448 |
| [ 5.319445] [<ffffffc0000c314c>] kthread+0xf8/0x100 |
| [ 5.319449] ---[ end trace 0af8bdd5bcf4f305 ]--- |
| [ 5.321125] set_usb_charge_mode_par on = 2 |
| [ 5.324575] qpnp-smbcharger qpnp-smbcharger-18: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent! |
| [ 5.352718] msm-dwc3 7000000.ssusb: Avail curr from USB = 500 |
| [ 5.359325] qpnp-smbcharger qpnp-smbcharger-18: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1 |
| [ 5.360728] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT) |
| [ 5.361114] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway. |
| [ 5.361120] ARM64 CPU ERP: SBE detection is disabled. |
| [ 5.362444] Registered cp15_barrier emulation handler |
| [ 5.362462] Registered setend emulation handler |
| [ 5.362734] Loading compiled-in X.509 certificates |
| [ 5.364294] Loaded X.509 cert 'Magrathea: Glacier signing key: 29755ebc26d45d342a5aa32405a8bc12bf83070a' |
| [ 5.365623] Key type encrypted registered |
| [ 5.446712] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped. |
| [ 5.448815] RNDIS_IPA module is loaded. |
| [ 5.449204] file system registered |
| [ 5.449254] mbim_init: initialize 1 instances |
| [ 5.449306] mbim_init: Initialized 1 ports |
| [ 5.450447] rndis_qc_init: initialize rndis QC instance |
| [ 5.450638] Number of LUNs=8 |
| [ 5.450647] Mass Storage Function, version: 2009/09/11 |
| [ 5.450654] LUN: removable file: (no medium) |
| [ 5.450668] Number of LUNs=1 |
| [ 5.450710] LUN: removable file: (no medium) |
| [ 5.450714] Number of LUNs=1 |
| [ 5.450939] android_usb gadget: android_usb ready |
| [ 5.452230] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4 |
| [ 5.452544] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-03-02 22:19:12 UTC (5264352) |
| [ 5.452901] pwm-ir soc:pwm_ir: reg-id = vdd, low-active = 0, use-timer = 0 |
| [ 5.453175] Registered IR keymap rc-lirc |
| [ 5.453327] input: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0/input5 |
| [ 5.453386] rc0: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0 |
| [ 5.453513] rc rc0: lirc_dev: driver ir-lirc-codec (pwm-ir) registered at minor = 0 |
| [ 5.456941] msm-core initialized without polling period |
| [ 5.460217] parse_cpu_levels: idx 1 276 |
| [ 5.460231] ------------[ cut here ]------------ |
| [ 5.460242] WARNING: CPU: 5 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/cpuidle/lpm-levels-of.c:724 parse_cluster+0x790/0x948() |
| [ 5.460246] calculate_residency: Incorrect power attributes for LPM |
| [ 5.460251] Modules linked in: |
| [ 5.460261] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 |
| [ 5.460266] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) |
| [ 5.460271] Call trace: |
| [ 5.460280] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c |
| [ 5.460286] [<ffffffc00008a294>] show_stack+0x20/0x28 |
| [ 5.460295] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 |
| [ 5.460301] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 |
| [ 5.460306] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac |
| [ 5.460312] [<ffffffc000965b94>] parse_cluster+0x790/0x948 |
| [ 5.460318] [<ffffffc0009658bc>] parse_cluster+0x4b8/0x948 |
| [ 5.460324] [<ffffffc000965dd4>] lpm_of_parse_cluster+0x88/0xb0 |
| [ 5.460330] [<ffffffc0009622f4>] lpm_probe+0x48/0x33c |
| [ 5.460338] [<ffffffc0005cf840>] platform_drv_probe+0x44/0x90 |
| [ 5.460344] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c |
| [ 5.460350] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 |
| [ 5.460356] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc |
| [ 5.460361] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 |
| [ 5.460367] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 |
| [ 5.460372] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 |
| [ 5.460378] [<ffffffc0005cf768>] __platform_driver_register+0x78/0x84 |
| [ 5.460384] [<ffffffc001516c90>] lpm_levels_module_init+0x24/0x4c |
| [ 5.460390] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 |
| [ 5.460398] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 |
| [ 5.460404] [<ffffffc000db797c>] kernel_init+0x20/0xe0 |
| [ 5.460409] ---[ end trace 0af8bdd5bcf4f307 ]--- |
| [ 5.460557] parse_cpu_levels: idx 1 286 |
| [ 5.460564] ------------[ cut here ]------------ |
| [ 5.460571] WARNING: CPU: 5 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/cpuidle/lpm-levels-of.c:724 parse_cluster+0x790/0x948() |
| [ 5.460575] calculate_residency: Incorrect power attributes for LPM |
| [ 5.460579] Modules linked in: |
| [ 5.460587] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 |
| [ 5.460591] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) |
| [ 5.460595] Call trace: |
| [ 5.460601] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c |
| [ 5.460607] [<ffffffc00008a294>] show_stack+0x20/0x28 |
| [ 5.460613] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 |
| [ 5.460618] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 |
| [ 5.460623] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac |
| [ 5.460629] [<ffffffc000965b94>] parse_cluster+0x790/0x948 |
| [ 5.460635] [<ffffffc0009658bc>] parse_cluster+0x4b8/0x948 |
| [ 5.460641] [<ffffffc000965dd4>] lpm_of_parse_cluster+0x88/0xb0 |
| [ 5.460647] [<ffffffc0009622f4>] lpm_probe+0x48/0x33c |
| [ 5.460653] [<ffffffc0005cf840>] platform_drv_probe+0x44/0x90 |
| [ 5.460658] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c |
| [ 5.460664] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 |
| [ 5.460669] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc |
| [ 5.460675] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 |
| [ 5.460680] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 |
| [ 5.460686] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 |
| [ 5.460692] [<ffffffc0005cf768>] __platform_driver_register+0x78/0x84 |
| [ 5.460698] [<ffffffc001516c90>] lpm_levels_module_init+0x24/0x4c |
| [ 5.460703] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 |
| [ 5.460709] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 |
| [ 5.460715] [<ffffffc000db797c>] kernel_init+0x20/0xe0 |
| [ 5.460719] ---[ end trace 0af8bdd5bcf4f308 ]--- |
| [ 5.464460] qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl |
| [ 5.466617] rmnet_ipa started initialization |
| [ 5.466631] IPA SSR support = True |
| [ 5.466635] IPA ipa-loaduC = True |
| [ 5.466640] IPA SG support = True |
| [ 5.468559] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. |
| [ 5.468566] ipa ipa2_uc_state_check:301 uC is not loaded |
| [ 5.469554] rmnet_ipa completed initialization |
| [ 5.474659] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully |
| [ 5.485738] msm8952-asoc-wcd c051000.sound: default codec configured |
| [ 5.489258] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered |
| [ 5.489302] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517) |
| [ 5.490447] vdd_vreg: disabling |
| [ 5.490454] adv_vreg: disabling |
| [ 5.490481] gfx_mem_acc_corner: disabling |
| [ 5.490487] apc_mem_acc_corner: disabling |
| [ 5.490499] clock_late_init: Removing enables held for handed-off clocks |
| [ 5.494305] ALSA device list: |
| [ 5.494310] No soundcards found. |
| [ 5.494385] Warning: unable to open an initial console. |
| [ 5.494684] Freeing unused kernel memory: 868K (ffffffc0014d1000 - ffffffc0015aa000) |
| [ 5.494713] Freeing alternatives memory: 80K (ffffffc0015aa000 - ffffffc0015be000) |
| [ 5.495942] init: init first stage started! |
| [ 5.501427] SELinux: 2048 avtab hash slots, 14668 rules. |
| [ 5.509733] SELinux: 2048 avtab hash slots, 14668 rules. |
| [ 5.509765] SELinux: 1 users, 2 roles, 1183 types, 0 bools, 1 sens, 1024 cats |
| [ 5.509775] SELinux: 63 classes, 14668 rules |
| [ 5.512267] SELinux: Class can_socket not defined in policy. |
| [ 5.512276] SELinux: the above unknown classes and permissions will be denied |
| [ 5.512301] SELinux: Completing initialization. |
| [ 5.512305] SELinux: Setting up existing superblocks. |
| [ 5.512320] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| [ 5.512343] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts |
| [ 5.512446] SELinux: initialized (dev bdev, type bdev), not configured for labeling |
| [ 5.512459] SELinux: initialized (dev proc, type proc), uses genfs_contexts |
| [ 5.512479] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts |
| [ 5.544494] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs |
| [ 5.544513] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs |
| [ 5.544522] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling |
| [ 5.544531] SELinux: initialized (dev aio, type aio), not configured for labeling |
| [ 5.544542] SELinux: initialized (dev devpts, type devpts), uses transition SIDs |
| [ 5.544565] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts |
| [ 5.544626] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| [ 5.544651] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts |
| [ 5.555599] audit: type=1403 audit(5264352.589:2): policy loaded auid=4294967295 ses=4294967295 |
| [ 5.556269] audit: type=1404 audit(5264352.589:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 |
| [ 5.580239] init: (Initializing SELinux enforcing took 0.08s.) |
| [ 5.583760] init: init second stage started! |
| [ 5.591600] init: Running restorecon... |
| [ 5.825777] init: waitpid failed: No child processes |
| [ 5.826060] init: (Loading properties from /default.prop took 0.00s.) |
| [ 5.827734] init: /init.rc: 671: invalid keyword 'chown' |
| [ 5.827750] init: /init.rc: 672: invalid keyword 'chmod' |
| [ 5.827771] init: /init.rc: 677: invalid keyword 'system' |
| [ 5.827790] init: /init.rc: 683: invalid keyword 'system' |
| [ 5.827891] init: (Parsing /init.environ.rc took 0.00s.) |
| [ 5.828240] init: (Parsing /init.usb.rc took 0.00s.) |
| [ 5.829437] init: /init.qcom.rc: 609: user requires 1 argument |
| [ 5.834921] init: (Parsing init.qcom.usb.rc took 0.00s.) |
| [ 5.836872] init: (Parsing init.msm.usb.configfs.rc took 0.00s.) |
| [ 5.837173] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 259: invalid keyword 'load_all_props' |
| [ 5.837922] init: (Parsing init.carrier.rc took 0.00s.) |
| [ 5.837935] init: (Parsing init.target.rc took 0.00s.) |
| [ 5.838095] init: (Parsing init.qcom.factory.rc took 0.00s.) |
| [ 5.838133] init: could not import file 'init.qcom.test.rc' from '/init.qcom.rc': No such file or directory |
| [ 5.838147] init: (Parsing /init.qcom.rc took 0.01s.) |
| [ 5.839068] init: (Parsing /init.usb.configfs.rc took 0.00s.) |
| [ 5.839156] init: (Parsing /init.zygote64_32.rc took 0.00s.) |
| [ 5.839613] init: (Parsing /init.miui8.rc took 0.00s.) |
| [ 5.839626] init: (Parsing /init.miui.rc took 0.00s.) |
| [ 5.839637] init: (Parsing /init.rc took 0.01s.) |
| [ 5.840178] init: Starting service 'ueventd'... |
| [ 5.841366] audit: type=1400 audit(5264352.879:4): avc: denied { create } for pid=1 comm="init" name="cust" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 5.841578] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| [ 5.841790] init: Waiting for /dev/.coldboot_done... |
| [ 5.842351] ueventd: ueventd started! |
| [ 5.927866] random: nonblocking pool is initialized |
| [ 6.296988] ueventd: Coldboot took 0.45s. |
| [ 6.305266] init: Waiting for /dev/.coldboot_done took 0.46s. |
| [ 6.305764] init: console init failed. Open on Console device ttyHSL0 failed(No such file or directory) |
| [ 6.306486] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| [ 6.307398] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| [ 6.307575] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts |
| [ 6.309901] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| [ 6.310460] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory |
| [ 6.310500] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory |
| [ 6.310532] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory |
| [ 6.310563] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory |
| [ 6.310594] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory |
| [ 6.310624] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory |
| [ 6.311723] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| [ 6.311889] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument |
| [ 6.312960] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| [ 6.316233] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts |
| [ 6.316383] Registered swp emulation handler |
| [ 6.316857] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.swappiness': No such file or directory |
| [ 6.316887] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate': No such file or directory |
| [ 6.317018] audit: type=1400 audit(5264353.349:5): avc: denied { create } for pid=1 comm="init" name="cust" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 6.317188] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| [ 6.317630] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| [ 6.754401] fs_mgr: Enabling dm-verity for system (mode 0) |
| [ 6.754431] fs_mgr: loading verity table: '1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 774155 774155 sha256 152ad6580ea6f4e2a10f017b61c225f644f086756300700652ef67b735066400 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 9 use_fec_from_device /dev/block/bootdevice/by-name/system fec_start 780261 fec_blocks 780261 fec_roots 2 ignore_zero_blocks' |
| [ 6.773855] EXT4-fs (dm-0): mounting with "discard" option, but the device does not support discard |
| [ 6.773869] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,discard |
| [ 6.773892] SELinux: initialized (dev dm-0, type ext4), uses xattr |
| [ 6.774000] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0 |
| [ 6.774485] EXT4-fs (mmcblk0p49): VFS: Can't find ext4 filesystem |
| [ 6.774553] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=-1: Invalid argument |
| [ 6.777515] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata |
| [ 6.833032] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 6.833032] |
| [ 6.833099] e2fsck: ext2fs_open2: Bad magic number in super-block |
| [ 6.833099] |
| [ 6.833110] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks... |
| [ 6.833110] |
| [ 6.833121] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/bootdevice/by-name/userdata |
| [ 6.833121] |
| [ 6.833130] e2fsck: |
| [ 6.833130] |
| [ 6.833141] e2fsck: The superblock could not be read or does not describe a correct ext2 |
| [ 6.833141] |
| [ 6.833151] e2fsck: filesystem. If the device is valid and it really contains an ext2 |
| [ 6.833151] |
| [ 6.833162] e2fsck: filesystem (and not swap or ufs or something else), then the superblock |
| [ 6.833162] |
| [ 6.833172] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock: |
| [ 6.833172] |
| [ 6.833182] e2fsck: e2fsck -b 8193 <device> |
| [ 6.833182] |
| [ 6.833191] e2fsck: |
| [ 6.833191] |
| [ 6.833206] e2fsck: e2fsck terminated by exit(8) |
| [ 6.833206] |
| [ 6.833645] EXT4-fs (mmcblk0p49): VFS: Can't find ext4 filesystem |
| [ 6.833693] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=-1 |
| [ 6.833993] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type ext4 ) |
| [ 6.834073] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| [ 6.834196] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cust,/cust,ext4)=-1: No such file or directory |
| [ 6.834219] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cust |
| [ 6.843866] audit: type=1400 audit(5264353.879:6): avc: denied { getattr } for pid=433 comm="e2fsck" path="/dev/block/mmcblk0p48" dev="tmpfs" ino=13686 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 |
| [ 6.843977] audit: type=1400 audit(5264353.879:7): avc: denied { getattr } for pid=433 comm="e2fsck" path="/dev/block/mmcblk0p48" dev="tmpfs" ino=13686 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 |
| [ 6.844048] audit: type=1400 audit(5264353.879:8): avc: denied { read write } for pid=433 comm="e2fsck" name="mmcblk0p48" dev="tmpfs" ino=13686 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 |
| [ 6.844897] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 6.844897] |
| [ 6.844915] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/bootdevice/by-name/cust |
| [ 6.844915] |
| [ 6.844926] e2fsck: You must have r/w access to the filesystem or be root |
| [ 6.844926] |
| [ 6.844939] e2fsck: e2fsck terminated by exit(8) |
| [ 6.844939] |
| [ 6.850960] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: barrier=1 |
| [ 6.850982] SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr |
| [ 6.851075] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cust,target=/cust,type=ext4)=0 |
| [ 6.854009] init: (Parsing /system/etc/init/atrace.rc took 0.00s.) |
| [ 6.854252] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.) |
| [ 6.854497] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.) |
| [ 6.854782] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.) |
| [ 6.855049] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.) |
| [ 6.855264] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.) |
| [ 6.855515] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.) |
| [ 6.855733] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.) |
| [ 6.856037] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.) |
| [ 6.856250] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.) |
| [ 6.856497] init: (Parsing /system/etc/init/installd.rc took 0.00s.) |
| [ 6.856706] init: (Parsing /system/etc/init/keystore.rc took 0.00s.) |
| [ 6.856983] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.) |
| [ 6.857215] init: (Parsing /system/etc/init/logd.rc took 0.00s.) |
| [ 6.857466] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.) |
| [ 6.857679] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.) |
| [ 6.857926] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.) |
| [ 6.858146] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.) |
| [ 6.858400] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.) |
| [ 6.858612] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.) |
| [ 6.858863] init: (Parsing /system/etc/init/netd.rc took 0.00s.) |
| [ 6.859101] init: (Parsing /system/etc/init/racoon.rc took 0.00s.) |
| [ 6.859360] init: (Parsing /system/etc/init/rild.rc took 0.00s.) |
| [ 6.859602] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.) |
| [ 6.859856] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.) |
| [ 6.860139] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.) |
| [ 6.860423] init: (Parsing /system/etc/init/vdc.rc took 0.00s.) |
| [ 6.860637] init: (Parsing /system/etc/init/vold.rc took 0.00s.) |
| [ 6.869467] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1 |
| [ 6.869486] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr |
| [ 6.872252] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1 |
| [ 6.872272] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr |
| [ 6.876157] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1 |
| [ 6.876176] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr |
| [ 6.879049] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling |
| [ 6.879333] EXT4-fs (mmcblk0p30): VFS: Can't find ext4 filesystem |
| [ 6.879517] audit: type=1400 audit(5264353.909:9): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 6.879587] audit: type=1400 audit(5264353.909:10): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 6.880724] init: Starting service 'logd'... |
| [ 6.903461] logd.auditd: start |
| [ 6.903495] logd.klogd: 6903471768 |
| [ 7.390418] type=1400 audit(5264354.429:11): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 7.390547] type=1400 audit(5264354.429:12): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 7.489861] type=1400 audit(5264354.519:13): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 7.490075] type=1400 audit(5264354.519:14): avc: denied { setattr } for pid=1 comm="init" name="lost+found" dev="mmcblk0p48" ino=11 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 |
| [ 7.490285] init_hook_E: Could not find /cust/cust_variant and /data/miui/cust_variant |
| [ 7.490893] init_hook_I: cust prop white key: persist.sys.timezone |
| [ 7.490909] init_hook_I: cust prop white key: ro.carrier.name |
| [ 7.490921] init_hook_I: cust prop white key: ro.miui.cust_variant |
| [ 7.490935] init_hook_I: cust prop white key: ro.miui.region |
| [ 7.490949] init_hook_I: cust prop white key: ro.product.locale.language |
| [ 7.490963] init_hook_I: cust prop white key: ro.product.locale.region |
| [ 7.490977] init_hook_I: cust prop white key: ro.miui.mcc |
| [ 7.490991] init_hook_I: cust prop white key: ro.miui.mnc |
| [ 7.491001] init_hook_I: cust prop white key: ro.com.android.mobiledata |
| [ 7.491015] init_hook_I: cust prop white key: ro.build.hardware.version |
| [ 7.491066] init: (Loading properties from /data/miui/cts.prop took 0.00s.) |
| [ 7.492291] init: property_set("ro.cutoff_voltage_mv", "3400") failed |
| [ 7.492823] init: property_set("ro.product.mod_device", "mido_global") failed |
| [ 7.493004] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.) |
| [ 7.493392] init: property_set("ro.telephony.default_network", "22,20") failed |
| [ 7.493415] init: (Loading properties from /system/vendor/default.prop took 0.00s.) |
| [ 7.493443] init: (Loading properties from /system/vendor/power.prop took 0.00s.) |
| [ 7.493457] init: (Loading properties from /system/build.prop took 0.00s.) |
| [ 7.493489] init: (Loading properties from /vendor/build.prop took 0.00s.) |
| [ 7.493513] init: (Loading properties from /factory/factory.prop took 0.00s.) |
| [ 7.493640] init: /recovery not specified in fstab |
| [ 7.494175] init: Starting service 'debuggerd'... |
| [ 7.494772] init: Starting service 'debuggerd64'... |
| [ 7.495651] init: Starting service 'vold'... |
| [ 7.496429] init: Not bootcharting. |
| [ 7.881710] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'... |
| [ 7.896220] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 464) exited with status 0 |
| [ 7.904986] init: Starting service 'perfd'... |
| [ 7.907676] init: write_file: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory |
| [ 7.911815] init: Starting service 'carrier_switcher'... |
| [ 8.034599] init: SELinux: Could not stat /sys/hwconf: No such file or directory. |
| [ 8.035318] init: Service checkpath does not have a SELinux domain defined. |
| [ 8.036969] init_hook_E: Could not find /cust/cust_variant and /data/miui/cust_variant |
| [ 8.037022] init_hook_I: cust prop white key: persist.sys.timezone |
| [ 8.037035] init_hook_I: cust prop white key: ro.carrier.name |
| [ 8.037045] init_hook_I: cust prop white key: ro.miui.cust_variant |
| [ 8.037056] init_hook_I: cust prop white key: ro.miui.region |
| [ 8.037071] init_hook_I: cust prop white key: ro.product.locale.language |
| [ 8.037082] init_hook_I: cust prop white key: ro.product.locale.region |
| [ 8.037092] init_hook_I: cust prop white key: ro.miui.mcc |
| [ 8.037102] init_hook_I: cust prop white key: ro.miui.mnc |
| [ 8.037115] init_hook_I: cust prop white key: ro.com.android.mobiledata |
| [ 8.037126] init_hook_I: cust prop white key: ro.build.hardware.version |
| [ 8.037171] init: (Loading properties from /data/miui/cts.prop took 0.00s.) |
| [ 8.037213] init: (Loading properties from /cust/cust/miui_customized.prop took 0.00s.) |
| [ 8.037410] init: Starting service 'logd-reinit'... |
| [ 8.041258] subsys-pil-tz c200000.qcom,lpass: adsp: loading from 0x000000008d600000 to 0x000000008e700000 |
| [ 8.049480] logd.daemon: reinit |
| [ 8.231447] subsys-pil-tz c200000.qcom,lpass: adsp: Brought out of reset |
| [ 8.268329] subsys-pil-tz c200000.qcom,lpass: adsp: Power/Clock ready interrupt received |
| [ 8.268334] subsys-pil-tz c200000.qcom,lpass: Subsystem error monitoring/handling services are up |
| [ 8.268394] L-Notify: Generel: 7 |
| [ 8.268656] init: Service 'carrier_switcher' (pid 466) exited with status 0 |
| [ 8.268774] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000 |
| [ 8.268811] init: Service 'logd-reinit' (pid 475) exited with status 0 |
| [ 8.268894] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: pil get failed, |
| [ 8.268901] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image loading failed |
| [ 8.268956] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'... |
| [ 8.282510] msm8952-asoc-wcd c051000.sound: default codec configured |
| [ 8.286233] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered |
| [ 8.286266] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517) |
| [ 8.298524] msm8952-asoc-wcd c051000.sound: default codec configured |
| [ 8.303444] wcd-spmi-core msm8x16_wcd_codec-11: Error: regulator not found:cdc-vdd-spkdrv |
| [ 8.308462] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer |
| [ 8.308477] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer |
| [ 8.308507] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer |
| [ 8.308514] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer |
| [ 8.308820] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for INT_FM_TX --> INTERNAL_FM_TX --> SEC_MI2S_RX Port Mixer |
| [ 8.308827] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT_FM_TX -> INTERNAL_FM_TX -> SEC_MI2S_RX Port Mixer |
| [ 8.313290] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer |
| [ 8.313303] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer |
| [ 8.313321] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer |
| [ 8.313327] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer |
| [ 8.315133] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX |
| [ 8.315140] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3 |
| [ 8.318215] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer |
| [ 8.318223] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer |
| [ 8.318627] init: property_set("ro.sf.lcd_density", "480") failed |
| [ 8.318719] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer |
| [ 8.318726] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer |
| [ 8.319663] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX |
| [ 8.319670] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX |
| [ 8.341089] apr_tal:Q6 Is Up |
| [ 8.349136] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to create SEC_MI2S_RX Port Mixer debugfs file |
| [ 8.357068] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths |
| [ 8.361102] wcd-spmi-core msm8x16_wcd_codec-11: ASoC: mux RX3 MIX1 INP3 has no paths |
| [ 8.361228] wcd-spmi-core msm8x16_wcd_codec-11: ASoC: mux RX2 MIX1 INP3 has no paths |
| [ 8.378181] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service |
| [ 8.414762] msm8952-asoc-wcd c051000.sound: control 3:0:0:IEC958 Playback PCM Stream:0 is already present |
| [ 8.414777] msm-hdmi-dba-codec-rx soc:qcom,msm-hdmi-dba-codec-rx: ASoC: Failed to add IEC958 Playback PCM Stream: -16 |
| [ 8.414785] msm_dba_get_probed_device: Device not found (adv7533, 0) |
| [ 8.414790] msm_dba_register_client: Device not found (adv7533, 0) |
| [ 8.414796] msm_hdmi_dba_codec_rx_init_dba: error in registering audio client 0 |
| [ 8.431866] input: msm8953-snd-card-mtp Headset Jack as /devices/soc/c051000.sound/sound/card0/input6 |
| [ 8.432067] input: msm8953-snd-card-mtp Button Jack as /devices/soc/c051000.sound/sound/card0/input7 |
| [ 8.580686] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 492) exited with status 0 |
| [ 8.583453] init: Starting service 'healthd'... |
| [ 8.584066] init: Starting service 'qcom-c_core-sh'... |
| [ 8.584705] init: Starting service 'irsc_util'... |
| [ 8.585330] init: Starting service 'rmt_storage'... |
| [ 8.585765] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access' |
| [ 8.586029] init: Starting service 'tftp_server'... |
| [ 8.586717] init: Starting service 'config_bt_addr'... |
| [ 8.587359] init: Starting service 'config_bluetooth'... |
| [ 8.588098] init: Starting service 'sensor-sh'... |
| [ 8.588808] init: Starting service 'cs-early-boot'... |
| [ 8.589504] init: Starting service 'qcom-usb-sh'... |
| [ 8.590453] init: Starting service 'qseecomd'... |
| [ 8.591337] init: Starting service 'per_mgr'... |
| [ 8.592168] init: Starting service 'getcolorid'... |
| [ 8.592752] init: Starting service 'setlockstate'... |
| [ 8.593691] init: Starting service 'ssService'... |
| [ 8.594525] init: Starting service 'lmkd'... |
| [ 8.595409] init: Starting service 'servicemanager'... |
| [ 8.596226] init: Starting service 'surfaceflinger'... |
| [ 8.596772] init: couldn't write 557 to /sys/fs/cgroup/stune/foreground/tasks: No such file or directory |
| [ 8.597743] init: Service 'setlockstate' (pid 553) exited with status 0 |
| [ 8.602250] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory |
| [ 8.602295] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory |
| [ 8.602329] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory |
| [ 8.602362] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory |
| [ 8.602396] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory |
| [ 8.602429] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory |
| [ 8.602463] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory |
| [ 8.602496] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory |
| [ 8.602529] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory |
| [ 8.602562] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory |
| [ 8.602596] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory |
| [ 8.602660] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory |
| [ 8.602853] init: Service 'getcolorid' (pid 551) exited with status 0 |
| [ 8.602925] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory |
| [ 8.602962] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory |
| [ 8.602995] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory |
| [ 8.603027] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory |
| [ 8.603064] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory |
| [ 8.603096] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory |
| [ 8.603128] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory |
| [ 8.603160] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory |
| [ 8.603396] init: sanitize_path: Failed to locate path /dev/block/bootdevice/by-name/rawdump: No such file or directory |
| [ 8.603410] init: do_chown: sanitize_path failed for path: /dev/block/bootdevice/by-name/rawdump prefix:/dev/block/ |
| [ 8.603445] init: sanitize_path: Failed to locate path /dev/block/bootdevice/by-name/rawdump: No such file or directory |
| [ 8.603458] init: do_chmod: failed for /dev/block/bootdevice/by-name/rawdump..prefix(/dev/block/) match err |
| [ 8.604398] init: write_file: Unable to open '/config/usb_gadget/g1/bcdUSB': No such file or directory |
| [ 8.604430] init: write_file: Unable to open '/config/usb_gadget/g1/os_desc/use': No such file or directory |
| [ 8.604465] init: write_file: Unable to open '/config/usb_gadget/g1/strings/0x409/serialnumber': No such file or directory |
| [ 8.604499] init: write_file: Unable to open '/config/usb_gadget/g1/strings/0x409/manufacturer': No such file or directory |
| [ 8.604533] init: write_file: Unable to open '/config/usb_gadget/g1/strings/0x409/product': No such file or directory |
| [ 8.605660] init: write_file: Unable to open '/config/usb_gadget/g1/os_desc/b_vendor_code': No such file or directory |
| [ 8.605693] init: write_file: Unable to open '/config/usb_gadget/g1/os_desc/qw_sign': No such file or directory |
| [ 8.605944] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts |
| [ 8.615060] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: write_file: Unable to open '/sys/devices/soc.0/78b8000.i2c/i2c-4/4-0020/input/input0/fw_name': No such file or directory |
| [ 8.615344] init: write_file: Unable to open '/sys/devices/soc.0/78b8000.i2c/i2c-4/4-0020/input/input0/update_fw': No such file or directory |
| [ 8.620444] init: Starting service 'ppd'... |
| [ 8.621229] init: Starting service 'per_proxy'... |
| [ 8.623340] init: Starting service 'exec 3 (/system/bin/vdc)'... |
| [ 8.624113] init: Service 'irsc_util' (pid 541) exited with status 0 |
| [ 8.638634] type=1400 audit(5264355.669:15): avc: denied { write } for pid=542 comm="rmt_storage" name="rmts" dev="debugfs" ino=12816 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0 |
| [ 8.641069] init: Service 'exec 3 (/system/bin/vdc)' (pid 569) exited with status 0 |
| [ 8.650226] of_batterydata_get_best_profile: qrd_msm8953_desay_4100mah found |
| [ 8.662325] FG: fg_batt_profile_init: Battery SOC: 49, V: 3860145uV |
| [ 8.662834] of_batterydata_get_best_profile: qrd_msm8953_desay_4100mah found |
| [ 8.692321] type=1400 audit(5264355.729:16): avc: denied { net_raw } for pid=589 comm="pm-service" capability=13 scontext=u:r:per_mgr:s0 tcontext=u:r:per_mgr:s0 tclass=capability permissive=0 |
| [ 8.692944] type=1400 audit(5264355.729:17): avc: denied { write } for pid=547 comm="sh" name="/" dev="tmpfs" ino=13304 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0 |
| [ 8.710719] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use) |
| [ 8.758316] init: Service 'qcom-c_core-sh' (pid 540) exited with status 0 |
| [ 8.758525] init: Service 'config_bt_addr' (pid 544) exited with status 0 |
| [ 8.761895] init: Starting service 'sensors'... |
| [ 8.763947] init: Service 'sensor-sh' (pid 546) exited with status 0 |
| [ 8.764208] enable_store: android_usb: already disabled |
| [ 8.764563] init: avc: denied { set } for property=ro.dbg.coresight.cfg_file pid=592 uid=0 gid=0 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:coresight_prop:s0 tclass=property_service permissive=0 |
| [ 8.764579] init: sys_prop: permission denied uid:0 name:ro.dbg.coresight.cfg_file |
| [ 8.773812] init: Service 'cs-early-boot' (pid 547) exited with status 0 |
| [ 8.791668] healthd: BatteryCycleCountPath not found |
| [ 8.804053] init: Service 'qcom-usb-sh' (pid 548) exited with status 0 |
| [ 8.804345] type=1400 audit(5264355.839:18): avc: denied { read write } for pid=615 comm="sensors.qcom" name="diag" dev="tmpfs" ino=13763 scontext=u:r:sensors:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 8.897330] subsys-pil-tz soc:qcom,kgsl-hyp: a506_zap: loading from 0x000000008f000000 to 0x000000008f002000 |
| [ 8.908084] init: Service 'config_bluetooth' (pid 545) exited with status 0 |
| [ 8.915826] subsys-pil-tz soc:qcom,kgsl-hyp: a506_zap: Brought out of reset |
| [ 8.916986] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information. |
| [ 8.957803] type=1400 audit(5264355.989:19): avc: denied { read write } for pid=557 comm="surfaceflinger" name="diag" dev="tmpfs" ino=13763 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 8.977695] init: Starting service 'bootanim'... |
| [ 8.977881] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16 |
| [ 9.687411] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem |
| [ 9.688730] IPA received MPSS BEFORE_POWERUP |
| [ 9.689133] ipa ipa2_uc_state_check:301 uC is not loaded |
| [ 9.689154] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. |
| [ 9.690523] IPA BEFORE_POWERUP handling is complete |
| [ 9.696187] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x0000000086c00000 to 0x000000008c200000 |
| [ 9.713863] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue. |
| [ 9.716569] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f4b00000 to 0x00000000f4c00000 size 100000 |
| [ 9.853394] pil-q6v5-mss 4080000.qcom,mss: MBA boot done |
| [ 10.329606] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288 |
| [ 10.329632] get_ice_device_from_storage_type: found ice device ffffffc0acc62800 |
| [ 10.447405] get_ice_device_from_storage_type: found ice device ffffffc0acc62800 |
| [ 10.450076] QSEECOM: qseecom_create_key: Set the key successfully |
| [ 10.451170] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset |
| [ 10.453769] device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/bootdevice/by-name/userdata to dm-req-crypt ok! |
| [ 10.453769] |
| [ 10.456819] EXT4-fs (dm-1): Ignoring removed nomblk_io_submit option |
| [ 10.461437] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit |
| [ 10.461458] SELinux: initialized (dev dm-1, type ext4), uses xattr |
| [ 10.461577] fs_mgr: check_fs(): mount(/dev/block/dm-1,/data,ext4)=0: Success |
| [ 10.462893] fs_mgr: check_fs(): unmount(/data) succeeded |
| [ 10.462945] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-1 |
| [ 10.533256] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received |
| [ 10.533272] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up |
| [ 10.533948] M-Notify: General: 7 |
| [ 10.534378] IPA received MPSS AFTER_POWERUP |
| [ 10.534385] IPA AFTER_POWERUP handling is complete |
| [ 10.641279] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service |
| [ 10.733168] apr_tal:Modem Is Up |
| [ 10.743812] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000 |
| [ 10.778661] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 |
| [ 10.780068] ipa-wan handle_indication_req:133 not send indication |
| [ 10.782107] ipa ipa_uc_response_hdlr:461 IPA uC loaded |
| [ 10.782146] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. |
| [ 10.782549] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received |
| [ 10.784787] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. |
| [ 10.785582] ipa ipa_uc_wdi_event_log_info_handler:322 WDI feature missing 0x1 |
| [ 10.785590] ipa ipa_uc_ntn_event_log_info_handler:39 NTN feature missing 0x1 |
| [ 10.785618] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. |
| [ 10.937925] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 10.937925] |
| [ 10.937966] e2fsck: Pass 1: Checking inodes, blocks, and sizes |
| [ 10.937966] |
| [ 10.937978] e2fsck: Pass 2: Checking directory structure |
| [ 10.937978] |
| [ 10.937989] e2fsck: Pass 3: Checking directory connectivity |
| [ 10.937989] |
| [ 10.938000] e2fsck: Pass 4: Checking reference counts |
| [ 10.938000] |
| [ 10.938011] e2fsck: Pass 5: Checking group summary information |
| [ 10.938011] |
| [ 10.938023] e2fsck: data: 4677/1563648 files (11.9% non-contiguous), 694871/6290041 blocks |
| [ 10.938023] |
| [ 10.942135] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard |
| [ 10.942165] SELinux: initialized (dev dm-1, type ext4), uses xattr |
| [ 10.942316] fs_mgr: __mount(source=/dev/block/dm-1,target=/data,type=ext4)=0 |
| [ 10.944768] init_hook_I: cust prop white key: persist.sys.timezone |
| [ 10.944796] init_hook_I: cust prop white key: ro.carrier.name |
| [ 10.944807] init_hook_I: cust prop white key: ro.miui.cust_variant |
| [ 10.944817] init_hook_I: cust prop white key: ro.miui.region |
| [ 10.944833] init_hook_I: cust prop white key: ro.product.locale.language |
| [ 10.944845] init_hook_I: cust prop white key: ro.product.locale.region |
| [ 10.944856] init_hook_I: cust prop white key: ro.miui.mcc |
| [ 10.944866] init_hook_I: cust prop white key: ro.miui.mnc |
| [ 10.944878] init_hook_I: cust prop white key: ro.com.android.mobiledata |
| [ 10.944889] init_hook_I: cust prop white key: ro.build.hardware.version |
| [ 10.945280] init: (Loading properties from /cust/cust/us/cust.prop took 0.00s.) |
| [ 10.945315] init: (Loading properties from /data/miui/cts.prop took 0.00s.) |
| [ 10.945337] init: (Loading properties from /cust/cust/miui_customized.prop took 0.00s.) |
| [ 11.139330] init: Starting service 'logd-reinit'... |
| [ 11.150231] logd.daemon: reinit |
| [ 11.158218] init: Service 'logd-reinit' (pid 696) exited with status 0 |
| [ 11.160188] init: Starting service 'adbd'... |
| [ 11.163280] init: Not bootcharting. |
| [ 11.163963] read descriptors |
| [ 11.163976] read strings |
| [ 11.164000] mtp_bind_config |
| [ 11.178528] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 |
| [ 11.178542] hyp_assign_table: Failed to assign memory protection, ret = -5 |
| [ 11.178549] memshare: hyp_assign_phys failed size=2097152 err=-5 |
| [ 11.205434] init: Starting service 'exec 4 (/system/bin/tzdatacheck)'... |
| [ 11.214355] init: Service 'exec 4 (/system/bin/tzdatacheck)' (pid 702) exited with status 0 |
| [ 11.235271] init: Starting service 'carrier_switcher'... |
| [ 11.236585] init: SELinux: Could not stat /sys/hwconf: No such file or directory. |
| [ 11.236765] init: Service checkpath does not have a SELinux domain defined. |
| [ 11.239227] init: Starting service 'exec 5 (/system/bin/bootstat)'... |
| [ 11.249788] init: Service 'exec 5 (/system/bin/bootstat)' (pid 704) exited with status 0 |
| [ 11.253044] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 6 (/system/bin/update_verifier)' |
| [ 11.253561] init: Starting service 'flash_recovery'... |
| [ 11.254314] init: Starting service 'displayfeature'... |
| [ 11.254935] init: Starting service 'qcom-c_main-sh'... |
| [ 11.255586] init: Starting service 'cnd'... |
| [ 11.256341] init: Starting service 'ptt_socket_app'... |
| [ 11.257078] init: Starting service 'cnss_diag'... |
| [ 11.257566] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon' |
| [ 11.257620] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd' |
| [ 11.257965] init: Starting service 'thermal-engine'... |
| [ 11.258795] init: Starting service 'time_daemon'... |
| [ 11.259677] init: Starting service 'wcnss-service'... |
| [ 11.260773] init: Starting service 'imsqmidaemon'... |
| [ 11.261779] init: Starting service 'adsprpcd'... |
| [ 11.262857] init: Starting service 'hvdcp_opti'... |
| [ 11.263741] init: Starting service 'energy-awareness'... |
| [ 11.264702] init: Starting service 'zygote'... |
| [ 11.265832] init: Starting service 'zygote_secondary'... |
| [ 11.266769] init: Starting service 'shelld'... |
| [ 11.267340] init: cannot find '/system/xbin/su' (No such file or directory), disabling 'su_daemon' |
| [ 11.267369] init: cannot find '/bin/otad' (No such file or directory), disabling 'otad' |
| [ 11.267566] init: Service checkpath does not have a SELinux domain defined. |
| [ 11.267773] init: Starting service 'fdpp'... |
| [ 11.268676] init: Starting service 'mqsasd'... |
| [ 11.269587] init: Starting service 'audioserver'... |
| [ 11.270625] init: Starting service 'cameraserver'... |
| [ 11.271041] type=1400 audit(5264358.309:20): avc: denied { read write } for pid=711 comm="cnss_diag" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.272206] type=1400 audit(5264358.309:21): avc: denied { setattr } for pid=710 comm="ptt_socket_app" name="WCNSS_qcom_wlan_nv.bin" dev="mmcblk0p26" ino=12 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:persist_file:s0 tclass=file permissive=0 |
| [ 11.272663] type=1400 audit(5264358.309:22): avc: denied { setgid } for pid=710 comm="ptt_socket_app" capability=6 scontext=u:r:wcnss_service:s0 tcontext=u:r:wcnss_service:s0 tclass=capability permissive=0 |
| [ 11.273235] init: Starting service 'drm'... |
| [ 11.274225] init: Starting service 'installd'... |
| [ 11.275158] init: Starting service 'keystore'... |
| [ 11.276186] init: Starting service 'mediacodec'... |
| [ 11.277263] init: Starting service 'mediadrm'... |
| [ 11.278265] init: Starting service 'mediaextractor'... |
| [ 11.279132] init: Starting service 'media'... |
| [ 11.280141] init: Starting service 'netd'... |
| [ 11.281255] init: couldn't write 721 to /sys/fs/cgroup/stune/foreground/tasks: No such file or directory |
| [ 11.281310] init: Starting service 'ril-daemon'... |
| [ 11.282320] init: Service 'carrier_switcher' (pid 703) exited with status 0 |
| [ 11.282589] init: Service 'ptt_socket_app' (pid 710) exited with status 1 |
| [ 11.282746] init: Service 'cnss_diag' (pid 711) exited with status 255 |
| [ 11.283331] init: Starting service 'gx_fpd'... |
| [ 11.284361] init: Starting service 'dpmd'... |
| [ 11.285377] init: Starting service 'cnss-daemon'... |
| [ 11.286421] init: Starting service 'loc_launcher'... |
| [ 11.287376] init: Starting service 'qcom-sh'... |
| [ 11.288039] 'opened /dev/adsprpc-smd c 228 0' |
| [ 11.289370] init: Starting service 'atfwd'... |
| [ 11.292082] init: Starting service 'qseeproxydaemon'... |
| [ 11.292765] init: cannot find '/system/vendor/bin/seemp_healthd' (No such file or directory), disabling 'seemp_healthd' |
| [ 11.293133] init: Starting service 'qcamerasvr'... |
| [ 11.293627] init: cannot find '/system/bin/qfp-daemon' (No such file or directory), disabling 'qfp-daemon' |
| [ 11.293961] init: Starting service 'audiod'... |
| [ 11.294526] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator' |
| [ 11.294933] init: Starting service 'mtservice'... |
| [ 11.295947] init: Starting service 'vsimservice'... |
| [ 11.296853] init: Starting service 'mlipayservice'... |
| [ 11.297927] init: Starting service 'gatekeeperd'... |
| [ 11.299379] init: Starting service 'config_bt_addr'... |
| [ 11.301170] init: Starting service 'config_bluetooth'... |
| [ 11.302419] init: Starting service 'cnss_diag'... |
| [ 11.304030] type=1400 audit(5264358.319:23): avc: denied { read write } for pid=715 comm="imsqmidaemon" name="diag" dev="tmpfs" ino=13763 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.309136] init: Service 'time_daemon' is being killed... |
| [ 11.333389] type=1400 audit(5264358.349:24): avc: denied { write } for pid=720 comm="energy-awarenes" name="ptable" dev="debugfs" ino=13022 scontext=u:r:energyawareness:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0 |
| [ 11.333892] type=1400 audit(5264358.359:25): avc: denied { read write } for pid=714 comm="wcnss_service" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.336061] init: Service 'time_daemon' (pid 713) killed by signal 9 |
| [ 11.336094] init: Service 'time_daemon' (pid 713) killing any children in process group |
| [ 11.336368] init: Service 'energy-awareness' (pid 720) exited with status 0 |
| [ 11.337500] init: Starting service 'mcd_init'... |
| [ 11.338492] init: Service checksdkpath does not have a SELinux domain defined. |
| [ 11.339825] type=1400 audit(5264358.369:26): avc: denied { read write } for pid=709 comm="cnd" name="diag" dev="tmpfs" ino=13763 scontext=u:r:cnd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.353177] fdpp: main: start daemon. fdpp: startAsDaemon: called. |
| [ 11.359197] type=1400 audit(5264358.389:27): avc: denied { read write } for pid=759 comm="cnss-daemon" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.371460] wcnss_wlan triggered by userspace |
| [ 11.372166] wcnss_pm_qos_add_request: add request |
| [ 11.372196] wcnss_pm_qos_update_request: update request 100 |
| [ 11.377275] type=1400 audit(5264358.409:28): avc: denied { read write } for pid=754 comm="cnss_diag" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.378071] wcnss_notif_cb: wcnss notification event: 2 |
| [ 11.379815] type=1400 audit(5264358.409:29): avc: denied { read write } for pid=768 comm="thermal-engine" name="diag" dev="tmpfs" ino=13763 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.383563] init: Starting service 'imsdatadaemon'... |
| [ 11.384847] init: Service 'config_bt_addr' (pid 752) exited with status 0 |
| [ 11.385045] init: Service 'cnss_diag' (pid 754) exited with status 255 |
| [ 11.408654] init: cannot find '/system/bin/qmuxd' (No such file or directory), disabling 'qmuxd' |
| [ 11.417047] init: Starting service 'msm_irqbalance'... |
| [ 11.420510] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x000000008e700000 to 0x000000008ed43000 |
| [ 11.423331] wcnss_notif_cb: wcnss notification event: 6 |
| [ 11.431568] wcnss: IRIS Reg: 04000004 |
| [ 11.432077] type=1400 audit(5264358.459:30): avc: denied { read write } for pid=738 comm="dpmd" name="diag" dev="tmpfs" ino=13763 scontext=u:r:dpmd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.432537] android_work: android_work: sent uevent USB_STATE=CONNECTED |
| [ 11.437574] init: Starting service 'ipacm-diag'... |
| [ 11.473386] msm_thermal:set_enabled enabled = 0 |
| [ 11.501722] android_usb gadget: high-speed config #1: 86000c8.android_usb |
| [ 11.504245] init: Starting service 'ipacm'... |
| [ 11.519035] type=1400 audit(5264358.529:31): avc: denied { read write } for pid=838 comm="ipacm-diag" name="diag" dev="tmpfs" ino=13763 scontext=u:r:ipacm-diag:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.560259] android_work: android_work: sent uevent USB_STATE=CONFIGURED |
| [ 11.568381] octvm: [760][arg_idx 3]: /system/bin/mcd init 4 |
| [ 11.578188] octvm: try memsw_state device... |
| [ 11.578409] octvm: memsw_state device path:/dev/xiaomi_memsw_state |
| [ 11.606155] type=1400 audit(5264358.639:32): avc: denied { read write } for pid=777 comm="imsdatadaemon" name="diag" dev="tmpfs" ino=13763 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.616927] type=1400 audit(5264358.649:33): avc: denied { net_raw } for pid=777 comm="imsdatadaemon" capability=13 scontext=u:r:ims:s0 tcontext=u:r:ims:s0 tclass=capability permissive=0 |
| [ 11.675294] octvm: default config swap off |
| [ 11.675329] octvm: persist.sys.whetstone.level:[2] |
| [ 11.675340] octvm: config swap on |
| [ 11.675436] octvm: discover 1 zram devices, init 1 |
| [ 11.676933] init: Starting service 'ril-daemon2'... |
| [ 11.677544] zram0: detected capacity change from 0 to 1073741824 |
| [ 11.677597] octvm: config /sys/block/zram0/disksize to 1073741824 success |
| [ 11.677701] octvm: config sysctl /proc/sys/vm/page-cluster to 0 success |
| [ 11.677748] octvm: config sysctl /proc/sys/vm/swappiness to 60 success |
| [ 11.678483] Adding 1048572k swap on /dev/block/zram0. Priority:0 extents:1 across:1048572k SS |
| [ 11.683704] init: property_set("ro.qualcomm.bluetooth.opp", "true") failed |
| [ 11.759936] init: Starting service 'qti'... |
| [ 11.761247] init: property_set("ro.qualcomm.bluetooth.hfp", "true") failed |
| [ 11.770675] init: Service 'mcd_init' (pid 760) exited with status 0 |
| [ 11.777528] type=1400 audit(5264358.809:34): avc: denied { read write } for pid=736 comm="rild" name="diag" dev="tmpfs" ino=13763 scontext=u:r:rild:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.830233] type=1400 audit(5264358.859:35): avc: denied { read write } for pid=868 comm="qti" name="diag" dev="tmpfs" ino=13763 scontext=u:r:qti:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 11.886710] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset |
| [ 11.942050] init: Starting service 'netmgrd'... |
| [ 11.943523] init: Service 'flash_recovery' (pid 706) exited with status 0 |
| [ 11.944283] init: property_set("ro.qualcomm.bluetooth.hsp", "true") failed |
| [ 11.994713] type=1400 audit(5264359.029:36): avc: denied { read write } for pid=858 comm="rild" name="diag" dev="tmpfs" ino=13763 scontext=u:r:rild:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 12.028479] type=1400 audit(5264359.059:37): avc: denied { read write } for pid=883 comm="netmgrd" name="diag" dev="tmpfs" ino=13763 scontext=u:r:netmgrd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 |
| [ 12.125719] init: property_set("ro.qualcomm.bluetooth.pbap", "true") failed |
| [ 12.126750] init: Starting service 'port-bridge'... |
