Google Git
Sign in
android / platform / external / cpuinfo / refs/heads/main / . / test / dmesg / galaxy-j1-2016.log
blob: bc6e8e0bed19a1e5c95e6a1a5b534ad8514ca841 [file] [log] [blame]
<6>[ 0.000000] [0: swapper: 0] [c0] Booting Linux on physical CPU 0xf00
<6>[ 0.000000] [0: swapper: 0] [c0] Initializing cgroup subsys cpu
<6>[ 0.000000] [0: swapper: 0] [c0] Initializing cgroup subsys cpuacct
<5>[ 0.000000] [0: swapper: 0] [c0] Linux version 3.10.65-9606765 (dpi@SWDG9710) (gcc version 4.8 (GCC) ) #2 SMP PREEMPT Thu May 18 18:47:34 KST 2017
<4>[ 0.000000] [0: swapper: 0] [c0] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
<4>[ 0.000000] [0: swapper: 0] [c0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[ 0.000000] [0: swapper: 0] [c0] Machine: sc8830, model: Spreadtrum SP8835EB board
<6>[ 0.000000] [0: swapper: 0] [c0] [LCD] get_boot_panel_id: boot_panel_id = 0x 43
<4>[ 0.000000] [0: swapper: 0] [c0] Malformed early option 'lcd_id'
<4>[ 0.000000] [0: swapper: 0] [c0] mem_cs_get dram_cs_num=1
<4>[ 0.000000] [0: swapper: 0] [c0] mem_cs0_size_get dram_cs0_size =0x3ffc0000
<4>[ 0.000000] [0: swapper: 0] [c0] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] [0: swapper: 0] [c0] On node 0 totalpages: 261568
<7>[ 0.000000] [0: swapper: 0] [c0] free_area_init_node: node 0, pgdat c0a90400, node_mem_map c0d08000
<7>[ 0.000000] [0: swapper: 0] [c0] Normal zone: 1536 pages used for memmap
<7>[ 0.000000] [0: swapper: 0] [c0] Normal zone: 0 pages reserved
<7>[ 0.000000] [0: swapper: 0] [c0] Normal zone: 196096 pages, LIFO batch:31
<7>[ 0.000000] [0: swapper: 0] [c0] HighMem zone: 512 pages used for memmap
<7>[ 0.000000] [0: swapper: 0] [c0] HighMem zone: 65472 pages, LIFO batch:15
<6>[ 0.000000] [0: swapper: 0] [c0] PERCPU: Embedded 9 pages/cpu @c1524000 s13504 r8192 d15168 u36864
<7>[ 0.000000] [0: swapper: 0] [c0] pcpu-alloc: s13504 r8192 d15168 u36864 alloc=9*4096
<7>[ 0.000000] [0: swapper: 0] [c0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] [0: swapper: 0] [c0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260032
<5>[ 0.000000] [0: swapper: 0] [c0] Kernel command line: init=/init lcd_id=ID000043 lcd_base=9f197000 initrd=0x85500000,0x26b4b1 wfixnv=0x88240000,0x40000 wruntimenv=0x88280000,0x60000 sec_debug.reset_reason=0x1A2B3C00 hw_revision=5 muic_rustproof=0 sec_debug.level=0 androidboot.debug_level=0x4f4c console=null loglevel=0 sec_log=0xffe00@0x86b00000 androidboot.bootloader=J120HXXS0AQE1 androidboot.emmc_checksum=3 mem_cs=1, mem_cs0_sz=3ffc0000 jig_uart_set=0 connie=SM-J120H_OPEN_EUR_a6999ba313bf84aaa90de5c0d0b6107a cordon=2eb588e7bff5b7d16cc1305ef99f999a androidboot.serialno=4200ff80dc185400 calmode=0 fgu_init=2709,9355
<6>[ 0.000000] [0: swapper: 0] [c0] sprdfb: [lcd_id_get]LCD Panel ID from uboot: 0x43
<6>[ 0.000000] [0: swapper: 0] [c0] sprdfb: [lcd_base_get]LCD Panel Base from uboot: 0x9f197000
<4>[ 0.000000] [0: swapper: 0] [c0] get_boot_mode, uart_mode : 0
<6>[ 0.000000] [0: swapper: 0] [c0] fgu cmd=2709,9355!
<6>[ 0.000000] [0: swapper: 0] [c0] fgu_cmd adc_data: 0xa95 0x248b!
<6>[ 0.000000] [0: swapper: 0] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] [0: swapper: 0] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] [0: swapper: 0] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] [0: swapper: 0] [c0] Memory: 106MB 915MB = 1021MB total
<5>[ 0.000000] [0: swapper: 0] [c0] Memory: 980844k/980844k available, 67476k reserved, 261888K highmem
<5>[ 0.000000] [0: swapper: 0] [c0] Virtual kernel memory layout:
<5>[ 0.000000] [0: swapper: 0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] [0: swapper: 0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] [0: swapper: 0] vmalloc : 0xf0800000 - 0xff000000 ( 232 MB)
<5>[ 0.000000] [0: swapper: 0] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
<5>[ 0.000000] [0: swapper: 0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] [0: swapper: 0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] [0: swapper: 0] .text : 0xc0008000 - 0xc09acc64 (9876 kB)
<5>[ 0.000000] [0: swapper: 0] .init : 0xc09ad000 - 0xc0a1c4c0 ( 446 kB)
<5>[ 0.000000] [0: swapper: 0] .data : 0xc0a1e000 - 0xc0a996d8 ( 494 kB)
<6>[ 0.000000] [0: swapper: 0] [c0] SLUB: HWalign=64, Order=0-2, MinObjects=0, CPUs=4, Nodes=1
<6>[ 0.000000] [0: swapper/0: 0] [c0] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] [0: swapper/0: 0] [c0] NR_IRQS:554
<6>[ 0.000000] [0: swapper/0: 0] [c0] ahb ctl0 00000803, ctl2 02000000 glb aon apb0 7451cd08 aon apb1 0013c831 clk_en 00000003
<4>[ 0.000000] [0: swapper/0: 0] [c0] sc clock module early init ok
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [0]ext_26m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [1]ext_32k
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [2]clk_mpll
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [3]clk_dpll
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [4]clk_tdpll
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [5]clk_wpll
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [6]clk_cpll
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [7]clk_wifipll
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [8]clk_460m8
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [9]clk_300m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [10]clk_37m5
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [11]clk_66m_d
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [12]clk_51m2_w
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [13]clk_40m_wf1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [14]clk_312m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [15]clk_208m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [16]clk_104m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [17]clk_52m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [18]clk_768m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [19]clk_512m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [20]clk_384m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [21]clk_256m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [22]clk_192m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [23]clk_153m6
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [24]clk_128m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [25]clk_96m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [26]clk_76m8
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [27]clk_64m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [28]clk_51m2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [29]clk_48m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [30]clk_38m4
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [31]clk_24m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [32]clk_12m
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [33]clk_mcu
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [34]clk_ca7_axi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [35]clk_ca7_dbg
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [36]clk_emc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [37]clk_pub_ahb
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [38]clk_aon_apb
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [39]clk_adi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [40]clk_aux0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [41]clk_aux1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [42]clk_aux2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [43]clk_probe
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [44]clk_pwm0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [45]clk_pwm1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [46]clk_pwm2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [47]clk_pwm3
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [48]clk_thm
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [49]clk_efuse
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [50]clk_mspi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [51]clk_i2c
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [52]clk_avs0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [53]clk_avs1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [54]clk_aud
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [55]clk_audif
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [56]clk_vbc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [57]clk_ca7_dap
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [58]clk_ca7_ts
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [59]clk_fm_in
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [60]clk_fm
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [61]clk_disp_emc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [62]clk_zip_emc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [63]clk_gsp_emc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [64]clk_ap_ahb
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [65]clk_ap_apb
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [66]clk_gsp
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [67]clk_dispc0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [68]clk_dispc0_dbi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [69]clk_dispc0_dpi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [70]clk_dispc1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [71]clk_dispc1_dbi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [72]clk_dispc1_dpi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [73]clk_nandc_ecc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [74]clk_nandc_2x
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [75]clk_sdio0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [76]clk_sdio1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [77]clk_sdio2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [78]clk_emmc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [79]clk_gps
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [80]clk_usb_ref
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [81]clk_uart0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [82]clk_uart1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [83]clk_uart2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [84]clk_uart3
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [85]clk_uart4
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [86]clk_i2c0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [87]clk_i2c1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [88]clk_i2c2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [89]clk_i2c3
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [90]clk_i2c4
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [91]clk_spi0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [92]clk_spi1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [93]clk_spi2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [94]clk_iis0
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [95]clk_iis1
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [96]clk_iis2
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [97]clk_iis3
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [98]clk_zipenc
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [99]clk_zipdec
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [100]clk_gpu_axi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [101]clk_gpu
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [102]clk_ccir_in
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [103]clk_mm
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [104]clk_mm_ahb
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [105]clk_mm_axi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [106]clk_mm_mtx_axi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [107]clk_mmu
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [108]clk_mm_ckg
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [109]clk_jpg
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [110]clk_csi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [111]clk_dcam_mipi
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [112]clk_vsp
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [113]clk_isp
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [114]clk_ccir
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [115]clk_sensor
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [116]clk_dcam
<6>[ 0.000000] [0: swapper/0: 0] [c0] clk: @@@file_clk_data: [117]clk_vpp
<4>[ 0.000000] [0: swapper/0: 0] [c0] sprd_init_timer
<6>[ 0.000000] [0: swapper/0: 0] [c0] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>[ 0.000000] [0: swapper/0: 0] [c0] sci_timer_init
<6>[ 0.000000] [0: swapper/0: 0] [c0] Console: colour dummy device 80x30
<6>[ 0.000213] [0: swapper/0: 0] [c0] Calibrating delay loop... 2413.36 BogoMIPS (lpj=12066816)
<6>[ 0.060638] [0: swapper/0: 0] [c0] pid_max: default: 32768 minimum: 301
<6>[ 0.060852] [0: swapper/0: 0] [c0] Security Framework initialized
<6>[ 0.060882] [0: swapper/0: 0] [c0] SELinux: Initializing.
<7>[ 0.060913] [0: swapper/0: 0] [c0] SELinux: Starting in enforcing mode
<6>[ 0.061004] [0: swapper/0: 0] [c0] Mount-cache hash table entries: 512
<6>[ 0.062072] [0: swapper/0: 0] [c0] Initializing cgroup subsys debug
<6>[ 0.062103] [0: swapper/0: 0] [c0] Initializing cgroup subsys freezer
<6>[ 0.062164] [0: swapper/0: 0] [c0] CPU: Testing write buffer coherency: ok
<6>[ 0.062194] [0: swapper/0: 0] [c0] ftrace: allocating 26053 entries in 77 pages
<3>[ 0.094482] [0: swapper/0: 1] [c0] /cpus/cpu@f00 missing clock-frequency property
<3>[ 0.094512] [0: swapper/0: 1] [c0] /cpus/cpu@f01 missing clock-frequency property
<3>[ 0.094543] [0: swapper/0: 1] [c0] /cpus/cpu@f02 missing clock-frequency property
<3>[ 0.094543] [0: swapper/0: 1] [c0] /cpus/cpu@f03 missing clock-frequency property
<6>[ 0.094604] [0: swapper/0: 1] [c0] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
<6>[ 0.094726] [0: swapper/0: 1] [c0] Setting up static identity map for 0xc06b1d70 - 0xc06b1dc8
<6>[ 0.135314] [0: swapper/0: 1] [c0] ftrace: Allocated trace_printk buffers
<4>[ 0.177185] [1: swapper/1: 0] [c1] CPU1: Booted secondary processor
<6>[ 0.236145] [1: swapper/1: 0] [c1] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
<4>[ 0.257965] [2: swapper/2: 0] [c2] CPU2: Booted secondary processor
<6>[ 0.316955] [2: swapper/2: 0] [c2] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
<4>[ 0.338745] [3: swapper/3: 0] [c3] CPU3: Booted secondary processor
<6>[ 0.397766] [3: swapper/3: 0] [c3] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
<6>[ 0.397857] [0: swapper/0: 1] [c0] Brought up 4 CPUs
<6>[ 0.397918] [0: swapper/0: 1] [c0] SMP: Total of 4 processors activated (9673.11 BogoMIPS).
<6>[ 0.397949] [0: swapper/0: 1] [c0] CPU: All CPU(s) started in SVC mode.
<6>[ 0.403320] [0: swapper/0: 1] [c0] *** register_pm_notifier, nb->notifier_call:cpu_hotplug_pm_callback ***
<7>[ 0.403625] [0: swapper/0: 1] [c0] power power.0: no of_node; not parsing pinctrl DT
<6>[ 0.404907] [0: swapper/0: 1] [c0] pinctrl core: initialized pinctrl subsystem
<7>[ 0.405181] [0: swapper/0: 1] [c0] reg-dummy reg-dummy: no of_node; not parsing pinctrl DT
<6>[ 0.405242] [0: swapper/0: 1] [c0] regulator-dummy: no parameters
<6>[ 0.405548] [0: swapper/0: 1] [c0] NET: Registered protocol family 16
<6>[ 0.406585] [0: swapper/0: 1] [c0] DMA: preallocated 256 KiB pool for atomic coherent allocations
<3>[ 0.407531] [0: swapper/0: 1] [c0] Hwspinlock get count failed!
<6>[ 0.407592] [0: swapper/0: 1] [c0] early alloc hwspinlock id 0
<6>[ 0.407623] [0: swapper/0: 1] [c0] early alloc hwspinlock id 1
<6>[ 0.407653] [0: swapper/0: 1] [c0] early alloc hwspinlock id 2
<6>[ 0.407653] [0: swapper/0: 1] [c0] early alloc hwspinlock id 3
<6>[ 0.407684] [0: swapper/0: 1] [c0] early alloc hwspinlock id 4
<6>[ 0.407684] [0: swapper/0: 1] [c0] early alloc hwspinlock id 8
<4>[ 0.407714] [0: swapper/0: 1] [c0] sprd hwspinlock probe ok: hwspinlock name = 40060000.hwspinlock1, hwspinlock_vid = 0x200,hwspinlock_exist_cnt = 32
<6>[ 0.407745] [0: swapper/0: 1] [c0] SPRD register hwspinlock1 ok,hwspinlock1's name is 40060000.hwspinlock1!
<4>[ 0.407745] [0: swapper/0: 1] [c0] After register,hwspinlock1 node available=0
<4>[ 0.407958] [0: swapper/0: 1] [c0] sci_adi_init: sprd_adi_base=f0960000
<6>[ 0.408081] [0: swapper/0: 1] [c0] sci_efuse_calibration_get() get efuse block 7, deta: 0x00008687
<4>[ 0.408111] [0: swapper/0: 1] [c0] auxadc cal from efuse ok!!!
<4>[ 0.408142] [0: swapper/0: 1] [c0] efuse_cal_data[0]: 0xd141068, efuse_cal_data[1]:0xb340e10
<4>[ 0.408935] [0: swapper/0: 1] [c0] sci get chip id = 0x0
<6>[ 0.410156] [0: swapper/0: 1] [c0] eic-gpio 40210000.gpio: base_addr f089a000, gpio base 288, ngpio 16, irq 69
<6>[ 0.410430] [0: swapper/0: 1] eic-gpio 40280000.gpio: base_addr f089c000, gpio base 0, ngpio 256, irq 67
<6>[ 0.411834] [0: swapper/0: 1] eic-gpio 40038100.gpio: base_addr f0968100, gpio base 304, ngpio 16, irq 419
<6>[ 0.412078] [0: swapper/0: 1] eic-gpio 40038480.gpio: base_addr f089e480, gpio base 256, ngpio 32, irq 436
<3>[ 0.415557] [0: swapper/0: 1] Hwspinlock get count failed!
<4>[ 0.415588] [0: swapper/0: 1] [c0] sprd hwspinlock probe ok: hwspinlock name = 20c00000.hwspinlock0, hwspinlock_vid = 0x200,hwspinlock_exist_cnt = 64
<6>[ 0.416748] [0: swapper/0: 1] [c0] allocating 262152 bytes at ef380000 (3221225472 physical) for avc log
<6>[ 0.416778] [0: swapper/0: 1] [c0] sec_avc_log_init: no old log found
<4>[ 0.416839] [0: swapper/0: 1] [c0] [sprdwl_mem_alloc]
<0>[ 0.416870] [0: swapper/0: 1] [c0] [wifi_mem][0][0xeec00000]
<0>[ 0.416900] [0: swapper/0: 1] [c0] [wifi_mem][1][0xeec40000]
<6>[ 0.417022] [0: swapper/0: 1] [c0] sipc:[0] define status=0xc04d7160, clear=0xc04d6efc, trigger=0xc04d6c98
<6>[ 0.417022] [0: swapper/0: 1] [c0] sipc:[1] define status=0xc04d717c, clear=0xc04d6fc8, trigger=0xc04d6d64
<6>[ 0.417053] [0: swapper/0: 1] [c0] sipc:[2] define status=0xc04d7198, clear=0xc04d7094, trigger=0xc04d6e30
<6>[ 0.417083] [0: swapper/0: 1] [c0] sipc: chd_nr=1 smem_base=0x87800000, smem_size=0x200000
<6>[ 0.417114] [0: swapper/0: 1] [c0] sipc:[0] name=sipc-w
<6>[ 0.417114] [0: swapper/0: 1] [c0] sipc:[0] dst=2
<6>[ 0.417144] [0: swapper/0: 1] [c0] sipc:[0] ap2cp_int_ctrl=0xf0852000, ap2cp_ctrl_phy=0x402c0000, cp2ap_int_ctrl=0xf0852004, cp2ap_ctrl_phy=0x402c0004
<6>[ 0.417175] [0: swapper/0: 1] [c0] sipc:[0] ap2cp_bit_trig=0x1, ap2cp_bit_clr=0x1
<6>[ 0.417175] [0: swapper/0: 1] [c0] sipc:[0] cp_base=0x88000000, cp_size=0x1c00000
<6>[ 0.417205] [0: swapper/0: 1] [c0] sipc:[0] smem_base=0x87800000, smem_size=0x140000
<6>[ 0.417236] [0: swapper/0: 1] [c0] sipc:[0] ring_base=0x89bff000, ring_size=0x1000
<6>[ 0.417266] [0: swapper/0: 1] [c0] sipc:[0] irq=100
<6>[ 0.417266] [0: swapper/0: 1] [c0] sipc: num=1
<6>[ 0.417297] [0: swapper/0: 1] [c0] sipc: [0] fn status=0xc04d7160, clear=0xc04d6efc, trigger=0xc04d6c98
<6>[ 0.417327] [0: swapper/0: 1] [c0] sipc:[0] smsg name=sipc-w, dst=2, irq=100
<6>[ 0.417358] [0: swapper/0: 1] [c0] sipc:[0] after ioremap vbase=0xf08b2000, pbase=0x89bff000, size=0x1000
<6>[ 0.417388] [0: swapper/0: 1] [c0] sipc:[0] created
<6>[ 0.417419] [0: swapper/0: 1] [c0] sipc: smem_base=0x87800000, smem_size=0x200000
<6>[ 0.434906] [0: swapper/0: 1] [c0] bio: create slab <bio-0> at 0
<6>[ 0.435424] [0: swapper/0: 1] [c0] sm5701:SM5701_i2c_init
<6>[ 0.435668] [0: swapper/0: 1] [c0] sc272x ana chipid:(0x2723a090), ana_mixed_ctl:(0x00000300), otp_sel:(0x00000000)
<6>[ 0.435699] [0: swapper/0: 1] [c0] sci_regulator_probe remap iram phy addr(0x50005000) to vir addr (0xf08d0000) ok!
<6>[ 0.435882] [0: swapper/0: 1] [c0] vddcore: 600 <--> 3125 mV at 1050 mV normal standby
<6>[ 0.436187] [0: swapper/0: 1] [c0] vddarm: 600 <--> 3125 mV at 1200 mV normal standby
<6>[ 0.436462] [0: swapper/0: 1] [c0] vddmem: 600 <--> 3125 mV at 1200 mV normal standby
<6>[ 0.436798] [0: swapper/0: 1] [c0] vddgen: 600 <--> 3125 mV at 2100 mV normal standby
<6>[ 0.437072] [0: swapper/0: 1] [c0] vddrf: 600 <--> 3125 mV at 1800 mV normal standby
<6>[ 0.437347] [0: swapper/0: 1] [c0] vddwpa: 3125 <--> 3400 mV at 3125 mV normal standby
<6>[ 0.437591] [0: swapper/0: 1] [c0] vddcon: 600 <--> 3125 mV at 1600 mV normal standby
<6>[ 0.437835] [0: swapper/0: 1] [c0] vddrf0: 1150 <--> 1943 mV at 1800 mV normal standby
<6>[ 0.438079] [0: swapper/0: 1] [c0] vddemmccore: 1200 <--> 3760 mV at 3000 mV normal standby
<6>[ 0.438385] [0: swapper/0: 1] [c0] vddgen1: 1150 <--> 1950 mV at 1800 mV normal standby
<6>[ 0.438629] [0: swapper/0: 1] [c0] vddgen0: 1150 <--> 1950 mV at 1800 mV normal standby
<6>[ 0.438873] [0: swapper/0: 1] [c0] vdddcxo: 1200 <--> 3760 mV at 1800 mV normal standby
<6>[ 0.439147] [0: swapper/0: 1] [c0] vdd25: 1200 <--> 3760 mV at 2800 mV normal standby
<6>[ 0.439392] [0: swapper/0: 1] [c0] vdd28: 1200 <--> 3760 mV at 2800 mV normal standby
<6>[ 0.439636] [0: swapper/0: 1] [c0] vdd18: 1150 <--> 1950 mV at 1800 mV normal standby
<6>[ 0.439880] [0: swapper/0: 1] [c0] vddwifipa: 1200 <--> 3760 mV at 3300 mV normal standby
<6>[ 0.440124] [0: swapper/0: 1] [c0] vddsdcore: 1200 <--> 3760 mV at 3000 mV normal standby
<6>[ 0.440429] [0: swapper/0: 1] [c0] vddsdio: 1200 <--> 3760 mV at 3000 mV normal standby
<6>[ 0.440673] [0: swapper/0: 1] [c0] vddsim0: 1200 <--> 3760 mV at 1800 mV normal standby
<6>[ 0.440948] [0: swapper/0: 1] [c0] vddsim1: 1200 <--> 3760 mV at 1200 mV normal standby
<6>[ 0.441223] [0: swapper/0: 1] [c0] vddsim2: 1200 <--> 3760 mV at 2800 mV normal standby
<6>[ 0.441497] [0: swapper/0: 1] [c0] vddcama: 1200 <--> 3760 mV at 2800 mV normal standby
<6>[ 0.441741] [0: swapper/0: 1] [c0] vddcamd: 1150 <--> 1950 mV at 1500 mV normal standby
<6>[ 0.442016] [0: swapper/0: 1] [c0] vddcamio: 1150 <--> 1950 mV at 1800 mV normal standby
<6>[ 0.442260] [0: swapper/0: 1] [c0] vddcammot: 1200 <--> 3760 mV at 2800 mV normal standby
<6>[ 0.442504] [0: swapper/0: 1] [c0] vddusb: 1200 <--> 3760 mV at 3300 mV normal standby
<6>[ 0.442749] [0: swapper/0: 1] [c0] vddkpled: 1200 <--> 3760 mV at 3300 mV normal standby
<6>[ 0.442993] [0: swapper/0: 1] [c0] vddvibr: 1200 <--> 3760 mV at 3300 mV normal standby
<5>[ 0.443664] [0: swapper/0: 1] [c0] SCSI subsystem initialized
<6>[ 0.443847] [0: swapper/0: 1] [c0] usbcore: registered new interface driver usbfs
<6>[ 0.443908] [0: swapper/0: 1] [c0] usbcore: registered new interface driver hub
<6>[ 0.444061] [0: swapper/0: 1] [c0] usbcore: registered new device driver usb
<6>[ 0.445709] [0: swapper/0: 1] [c0] i2c-gpio i2c_gpio.10: using pins 28 (SDA) and 27 (SCL)
<6>[ 0.446105] [0: swapper/0: 1] [c0] i2c-gpio i2c_gpio.11: using pins 82 (SDA) and 81 (SCL)
<6>[ 0.446472] [0: swapper/0: 1] [c0] SM5701_i2c_probe: SM5701 MFD Probe Start !!!!!
<6>[ 0.446533] [0: swapper/0: 1] [c0] SM5701_parse_dt: SM5701_parse_dt irq: -2
<6>[ 0.446533] [0: swapper/0: 1] [c0] SM5701_parse_dt: SM5701_parse_dt chgen: 169
<6>[ 0.446716] [0: swapper/0: 1] [c0] sm5701-i2c 5-0049: SM5701 MFD probe done!!!
<6>[ 0.446746] [0: swapper/0: 1] [c0] i2c-gpio i2c_gpio.12: using pins 133 (SDA) and 135 (SCL)
<6>[ 0.446929] [0: swapper/0: 1] [c0] sprd-i2c 70500000.i2c: sprd_i2c_probe() id=0, base=f08b4000
<6>[ 0.446960] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c0
<6>[ 0.447570] [0: swapper/0: 1] sprd-i2c 70600000.i2c: sprd_i2c_probe() id=1, base=f08b6000
<6>[ 0.447570] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c1
<6>[ 0.447937] [0: swapper/0: 1] sprd-i2c 70700000.i2c: sprd_i2c_probe() id=2, base=f08b8000
<6>[ 0.447937] [0: swapper/0: 1] [c0] (null): sprd_i2c_clk_init buf=clk_i2c2
<6>[ 0.448638] [0: swapper/0: 1] Linux video capture interface: v2.00
<6>[ 0.448699] [0: swapper/0: 1] [c0] SM5701_charger_init
<7>[ 0.448822] [0: swapper/0: 1] [c0] sm5701-charger sm5701-charger: no of_node; not parsing pinctrl DT
<6>[ 0.448852] [0: swapper/0: 1] [c0] SM5701_charger_probe: SM5701 Charger Probe Start
<6>[ 0.448883] [0: swapper/0: 1] [c0] sec_chg_dt_init chg_irq_attr request failed: 0
<4>[ 0.449432] [0: swapper/0: 1] [c0] sec_chg_dt_init: battery detect gpio 313
<6>[ 0.450439] [0: swapper/0: 1] [c0] SM5701_charger_initialize: SM5701 Charger init, CHIP REV : 9 !!
<6>[ 0.453124] [0: swapper/0: 1] [c0] SM5701_charger_initialize : SM5701_STATUS1 : 0x24
<6>[ 0.459716] [0: swapper/0: 1] [c0] SM5701_test_read
<6>[ 0.460693] [0: swapper/0: 1] [c0] read SM5701 addr : 0x03 data : 0x63
<6>[ 0.461700] [0: swapper/0: 1] [c0] read SM5701 addr : 0x04 data : 0xec
<6>[ 0.462677] [0: swapper/0: 1] [c0] read SM5701 addr : 0x05 data : 0xff
<6>[ 0.463684] [0: swapper/0: 1] [c0] read SM5701 addr : 0x06 data : 0x24
<6>[ 0.464660] [0: swapper/0: 1] [c0] read SM5701 addr : 0x07 data : 0x08
<6>[ 0.465667] [0: swapper/0: 1] [c0] read SM5701 addr : 0x08 data : 0x00
<6>[ 0.466644] [0: swapper/0: 1] [c0] read SM5701 addr : 0x09 data : 0x64
<6>[ 0.467651] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0a data : 0x11
<6>[ 0.468658] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0b data : 0x13
<6>[ 0.469635] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0c data : 0x23
<6>[ 0.470642] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0d data : 0x1e
<6>[ 0.471618] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0e data : 0x0f
<6>[ 0.472625] [0: swapper/0: 1] [c0] read SM5701 addr : 0x0f data : 0x0c
<6>[ 0.473602] [0: swapper/0: 1] [c0] read SM5701 addr : 0x10 data : 0x94
<6>[ 0.474609] [0: swapper/0: 1] [c0] read SM5701 addr : 0x11 data : 0x15
<6>[ 0.475585] [0: swapper/0: 1] [c0] read SM5701 addr : 0x12 data : 0x13
<6>[ 0.476593] [0: swapper/0: 1] [c0] read SM5701 addr : 0x13 data : 0x08
<6>[ 0.477569] [0: swapper/0: 1] [c0] read SM5701 addr : 0x14 data : 0x05
<6>[ 0.478698] [0: swapper/0: 1] [c0] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 0.485565] [0: swapper/0: 1] [c0] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24, SM5701_STATUS2 : 0x08
<6>[ 0.486541] [0: swapper/0: 1] [c0] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 0.487548] [0: swapper/0: 1] [c0] sm5701_get_float_voltage: battery cv voltage 0x1e
<3>[ 0.487579] [0: swapper/0: 1] [c0] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22
<6>[ 0.488739] [0: kworker/0:0: 4] [c0] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 0.495605] [0: kworker/0:0: 4] [c0] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24, SM5701_STATUS2 : 0x08
<6>[ 0.496612] [0: kworker/0:0: 4] [c0] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 0.497619] [0: kworker/0:0: 4] [c0] sm5701_get_float_voltage: battery cv voltage 0x1e
<3>[ 0.497619] [0: kworker/0:0: 4] [c0] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22
<6>[ 0.497863] [3:irq/395-charger: 53] [c3] *** SM5701_irq_thread ***
<6>[ 0.497894] [1: swapper/0: 1] [c1] SM5701_charger_probe: SM5701 Charger Probe Loaded
<3>[ 0.497985] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Fail to get psy (battery)
<3>[ 0.497985] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Fail to get psy (battery)
<4>[ 0.498107] [1: swapper/0: 1] [c1] ******* leds_sm5701_init *******
<4>[ 0.498291] [1: swapper/0: 1] [c1] ******* leds_sm5701_probe *******
<6>[ 0.498443] [1: swapper/0: 1] [c1] sm5701_set_imled imled_ma = 19
<6>[ 0.503631] [1: swapper/0: 1] [c1] write SM5701 addr : 0x12 data : 0x13
<6>[ 0.503631] [1: swapper/0: 1] [c1] sm5701_set_ifled ifled_ma = 21
<6>[ 0.504608] [3: kworker/3:0: 25] [c3] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24, SM5701_STATUS2 : 0x08
<3>[ 0.504608] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Interrupted but Good
<3>[ 0.504638] [3: kworker/3:0: 25] [c3] SM5701_isr_work: Fail to set psy (battery)
<6>[ 0.507263] [1: swapper/0: 1] [c1] write SM5701 addr : 0x11 data : 0x15
<6>[ 0.507293] [1: swapper/0: 1] [c1] sm5701_set_enabstmr abstmr_enable = 0
<6>[ 0.508239] [3: kworker/3:0: 25] [c3] SM5701_otg_over_current_status : Charging status 2(0x08)
<6>[ 0.509979] [1: swapper/0: 1] [c1] write SM5701 addr : 0x0f data : 0x0c
<6>[ 0.509979] [1: swapper/0: 1] [c1] leds_sm5701 leds_sm5701: LEDs_SM5701 Probe Done
<6>[ 0.510192] [1: swapper/0: 1] [c1] dma irq number is 82!
<6>[ 0.510589] [1: swapper/0: 1] [c1] power off sc8830_power_off, restart sc8830_machine_restart
<4>[ 0.510681] [1: swapper/0: 1] [c1] SAVED_VECTOR_SIZE 0x40
<4>[ 0.510742] [1: swapper/0: 1] [c1] test_memory eed30000 aed30000
<4>[ 0.510925] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_SLEEP_CTRL : 0x0000000c
<4>[ 0.510925] [0: pm_print: 55] [c0] ###---- REG_AP_AHB_AHB_EB : 0x00002803
<4>[ 0.510955] [0: pm_print: 55] [c0] ###---- REG_AP_AHB_AP_SYS_AUTO_SLEEP_CFG : 0x0000003b
<4>[ 0.510955] [0: pm_print: 55] [c0] ###---- REG_AP_APB_APB_EB : 0x007c4800
<4>[ 0.510986] [0: pm_print: 55] [c0] ###---- REG_AON_APB_APB_EB0 : 0x7e71dd08
<4>[ 0.510986] [0: pm_print: 55] [c0] ###---- REG_AON_APB_APB_EB1 : 0x0013ce31
<6>[ 0.511016] [1: swapper/0: 1] [c1] sc_cpuidle_init, enter, drv->state_count:3
<6>[ 0.511047] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:0
<6>[ 0.511047] [3: kworker/3:0: 25] [c3] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 0.511077] [3: kworker/3:0: 25] [c3] SM5701_isr_work: battery status : 1
<6>[ 0.511077] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:1
<6>[ 0.511108] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:2
<4>[ 0.511108] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_CP_SLP_STATUS_DBG0 : 0x00003230
<6>[ 0.511138] [1: swapper/0: 1] [c1] sc_cpuidle_register_device, cpu:3
<6>[ 0.511138] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:sc_cpuidle_pm_notify ***
<4>[ 0.511169] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_CP_SLP_STATUS_DBG1 : 0x00000000
<4>[ 0.511199] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_PWR_STATUS0_DBG : 0x00000000
<4>[ 0.511199] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_PWR_STATUS1_DBG : 0x00000000
<4>[ 0.511230] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_PWR_STATUS2_DBG : 0x07777777
<4>[ 0.511230] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_PWR_STATUS3_DBG : 0x00000007
<6>[ 0.511260] [1: swapper/0: 1] [c1] [SENSORS CORE] sensors_class_init
<4>[ 0.511260] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_SLEEP_STATUS : 0x00000055
<4>[ 0.511291] [0: pm_print: 55] [c0] ###---- REG_AON_APB_MPLL_CFG : 0x00000000
<4>[ 0.511291] [0: pm_print: 55] [c0] ###---- REG_AON_APB_DPLL_CFG : 0x00000000
<4>[ 0.511322] [0: pm_print: 55] [c0] ###---- REG_AON_CLK_EMC_CFG : 0x00000000
<4>[ 0.511322] [0: pm_print: 55] [c0] ###---- ANA_REG_GLB_LDO_PD_CTRL : 0x00006dff
<4>[ 0.511352] [0: pm_print: 55] [c0] ###---- REG_AON_APB_MPLL_CFG1 : 0x2762746e
<4>[ 0.511383] [0: pm_print: 55] [c0] ###---- REG_AON_APB_DPLL_CFG1 : 0xd89d8463
<4>[ 0.511383] [0: pm_print: 55] [c0] ###---- REG_PMU_APB_DDR_SLEEP_CTRL : 0x00000070
<4>[ 0.511413] [0: pm_print: 55] [c0] ###---- BIT_GPU_EB still set ----###
<4>[ 0.511413] [0: pm_print: 55] [c0] ###---- BIT_MM_EB still set ----###
<4>[ 0.511444] [0: pm_print: 55] [c0] ###---- BIT_CA7_DAP_EB still set ----###
<4>[ 0.511444] [0: pm_print: 55] [c0] ###---- BIT_DISPC0_EB still set ----###
<4>[ 0.511474] [0: pm_print: 55] [c0] ###---- BIT_EMMC_EB still set ----###
<4>[ 0.511474] [0: pm_print: 55] [c0] ###---- BIT_DISP_EMC_EB set ----###
<4>[ 0.511505] [0: pm_print: 55] [c0] ---------- A-die power status -----------
<6>[ 0.511505] [0: pm_print: 55] [c0] active wake lock pm_message_wakelock
<6>[ 0.511535] [0: pm_print: 55] [c0] active wake lock main
<6>[ 0.511535] [0: pm_print: 55] [c0] active wake lock sipc-smsg, time left 40
<6>[ 0.511566] [1: swapper/0: 1] [c1] input: meta_event as /devices/virtual/input/input0
<6>[ 0.511627] [1: swapper/0: 1] [c1] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.512084] [1: swapper/0: 1] [c1] Bluetooth: Core ver 2.16
<6>[ 0.512145] [1: swapper/0: 1] [c1] NET: Registered protocol family 31
<6>[ 0.512145] [1: swapper/0: 1] [c1] Bluetooth: HCI device and connection manager initialized
<6>[ 0.512176] [1: swapper/0: 1] [c1] Bluetooth: HCI socket layer initialized
<6>[ 0.512207] [1: swapper/0: 1] [c1] Bluetooth: L2CAP socket layer initialized
<6>[ 0.512237] [1: swapper/0: 1] [c1] Bluetooth: SCO socket layer initialized
<6>[ 0.512542] [1: kworker/1:0: 15] [c1] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.512603] [1: kworker/1:0: 15] [c1] cfg80211: World regulatory domain updated:
<6>[ 0.512603] [1: kworker/1:0: 15] [c1] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 0.512634] [1: kworker/1:0: 15] [c1] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 0.512634] [1: kworker/1:0: 15] [c1] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 0.512664] [1: kworker/1:0: 15] [c1] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 0.512695] [1: kworker/1:0: 15] [c1] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
<6>[ 0.512695] [1: kworker/1:0: 15] [c1] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
<6>[ 0.512725] [1: kworker/1:0: 15] [c1] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
<6>[ 0.512878] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:activity_stats_notifier ***
<6>[ 0.513427] [1: swapper/0: 1] [c1] -----SPRD_PIN_BASE:0xf08ba000-----
<6>[ 0.513427] [1: swapper/0: 1] [c1] pwr_domain[0]:vddsdio
<6>[ 0.513458] [1: swapper/0: 1] [c1] reg[0]:0x10
<6>[ 0.513458] [1: swapper/0: 1] [c1] bit_offset[0]:0x10
<6>[ 0.513488] [1: swapper/0: 1] [c1] bit_width[0]:0x1
<6>[ 0.513488] [1: swapper/0: 1] [c1] pwr_domain[1]:vddsim0
<6>[ 0.513519] [1: swapper/0: 1] [c1] reg[1]:0x10
<6>[ 0.513519] [1: swapper/0: 1] [c1] bit_offset[1]:0x11
<6>[ 0.513549] [1: swapper/0: 1] [c1] bit_width[1]:0x1
<6>[ 0.513580] [1: swapper/0: 1] [c1] pwr_domain[2]:vddsim1
<6>[ 0.513580] [1: swapper/0: 1] [c1] reg[2]:0x10
<6>[ 0.513610] [1: swapper/0: 1] [c1] bit_offset[2]:0x12
<6>[ 0.513610] [1: swapper/0: 1] [c1] bit_width[2]:0x1
<6>[ 0.513641] [1: swapper/0: 1] [c1] pwr_domain[3]:vddsim2
<6>[ 0.513641] [1: swapper/0: 1] [c1] reg[3]:0x10
<6>[ 0.513671] [1: swapper/0: 1] [c1] bit_offset[3]:0x13
<6>[ 0.513671] [1: swapper/0: 1] [c1] bit_width[3]:0x1
<6>[ 0.513702] [1: swapper/0: 1] [c1] pwr_domain[4]:vdd28
<6>[ 0.513702] [1: swapper/0: 1] [c1] reg[4]:0x10
<6>[ 0.513732] [1: swapper/0: 1] [c1] bit_offset[4]:0x14
<6>[ 0.513732] [1: swapper/0: 1] [c1] bit_width[4]:0x1
<6>[ 0.513793] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 440, regu_name:vddsdio
<6>[ 0.513854] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 440, regu_name:vddsim0
<6>[ 0.513916] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 440, regu_name:vddsim1
<6>[ 0.513946] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 440, regu_name:vddsim2
<6>[ 0.514007] [1: swapper/0: 1] [c1] pin_regulator_notifier_register, 440, regu_name:vdd28
<6>[ 0.514953] [1: swapper/0: 1] [c1] Switching to clocksource aon_timer_timer1
<6>[ 0.536224] [1: swapper/0: 1] [c1] *** register_pm_notifier, nb->notifier_call:fw_pm_notify ***
<6>[ 0.536743] [1: swapper/0: 1] [c1] NET: Registered protocol family 2
<6>[ 0.537506] [1: swapper/0: 1] [c1] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.537628] [1: swapper/0: 1] [c1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.537750] [1: swapper/0: 1] [c1] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.537841] [1: swapper/0: 1] [c1] TCP: reno registered
<6>[ 0.537841] [1: swapper/0: 1] [c1] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.537902] [1: swapper/0: 1] [c1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.538238] [1: swapper/0: 1] [c1] NET: Registered protocol family 1
<6>[ 0.538482] [1: swapper/0: 1] [c1] Unpacking initramfs...
<6>[ 0.683074] [1: swapper/0: 1] [c1] Freeing initrd memory: 2476K (c5500000 - c576b000)
<4>[ 0.683929] [1: swapper/0: 1] [c1] syssleep_init
<6>[ 0.683959] [1: swapper/0: 1] [c1] gps_bcm47520_init
<6>[ 0.684326] [1: swapper/0: 1] [c1] gps_regulator_on: (vdd18) main(1800000 uV) regulator turned ON!!
<4>[ 0.684326] [1: swapper/0: 1] [c1] gps_regulator_on: tcxo-regulator field is empty from dts.
<6>[ 0.684387] [1: swapper/0: 1] [c1] gps_clk_init: clk_aux0 enabled!!
<6>[ 0.684692] [1: swapper/0: 1] [c1] sec-thermistor sec_thermistor.9: sec_therm_probe: SEC Thermistor Driver Loading
<7>[ 0.685302] [1: swapper/0: 1] [c1] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
<6>[ 0.685363] [1: swapper/0: 1] [c1] audit: initializing netlink socket (enabled)
<4>[ 0.686096] [1: swapper/0: 1] [c1] bounce pool size: 64 pages
<6>[ 0.689361] [1: swapper/0: 1] [c1] zpool: loaded
<6>[ 0.690826] [1: swapper/0: 1] [c1] Registering sdcardfs 2.1.4
<6>[ 0.691436] [1: swapper/0: 1] [c1] exFAT: Core Version 1.2.19
<6>[ 0.691467] [1: swapper/0: 1] [c1] exFAT: FS Version 1.2.19
<6>[ 0.692108] [1: swapper/0: 1] [c1] fuse init (API version 7.22)
<6>[ 0.692413] [1: swapper/0: 1] [c1] msgmni has been set to 1409
<7>[ 0.692474] [1: swapper/0: 1] [c1] SELinux: Registering netfilter hooks
<6>[ 0.694488] [1: swapper/0: 1] [c1] io scheduler noop registered
<6>[ 0.694641] [1: swapper/0: 1] [c1] io scheduler cfq registered (default)
<7>[ 0.694946] [1: swapper/0: 1] [c1] secgpio_dvs secgpio_dvs: no of_node; not parsing pinctrl DT
<6>[ 0.694976] [1: swapper/0: 1] [c1] [secgpio_dvs] secgpio_dvs_probe has been created!!!
<6>[ 0.695190] [1: swapper/0: 1] [c1] [secgpio_dvs] secgpio_dvs_init has been initialized!!!
<4>[ 0.695190] [1: swapper/0: 1] [c1] [BACKLIGHT] gen_panel_backlight_init : 640
<6>[ 0.695343] [1: swapper/0: 1] [c1] backlight device : panel
<6>[ 0.695465] [1: swapper/0: 1] [c1] gen_panel_backlight_set_brightness: brightness(255), tune_level(350)
<6>[ 0.695495] [1: swapper/0: 1] [c1] gen-panel-backlight gen-panel-backlight.33: gen_panel_backlight resumed.
<4>[ 0.695495] [1: swapper/0: 1] [c1] [BACKLIGHT] probe success!!
<6>[ 0.695678] [1: swapper/0: 1] [c1] [LCD]called sprd_panel_probe
<6>[ 0.695770] [1: swapper/0: 1] [c1] [LCD] lcd_ldo_en, get gpio(153)
<6>[ 0.695800] [1: swapper/0: 1] [c1] [LCD] lcd_rst_n, get gpio(103)
<6>[ 0.695831] [1: swapper/0: 1] [c1] [LCD] [0] lcd_rst_n, off, 10usec
<6>[ 0.695861] [1: swapper/0: 1] [c1] [LCD] [1] lcd_ldo_en, on, 5000usec
<6>[ 0.695892] [1: swapper/0: 1] [c1] [LCD] [0] lcd_rst_n, on, 10000usec
<6>[ 0.695922] [1: swapper/0: 1] [c1] [LCD] [0] lcd_rst_n, off, 10000usec
<6>[ 0.695922] [1: swapper/0: 1] [c1] [LCD] [1] lcd_ldo_en, off, 20000usec
<6>[ 0.695953] [1: swapper/0: 1] [c1] [LCD] found (gen-panel-ea8061s_wVGA-video) by id(0x43)
<6>[ 0.696105] [1: swapper/0: 1] [c1] [LCD] gen_panel_parse_dt_panel, addr[offset:0, len:1], data[offset:1, len:1]
<3>[ 0.697448] [1: swapper/0: 1] [c1] [LCD] gen_panel_parse_dt_offset_table: gen-panel-acl-table not exist
<3>[ 0.697479] [1: swapper/0: 1] [c1] [LCD] gen_panel_parse_dt_offset_table: gen-panel-mps-table not exist
<3>[ 0.697814] [1: swapper/0: 1] [c1] [LCD] gen_panel_parse_dt_offset_table: gen-panel-elvss-temperature-table not exist
<4>[ 0.708953] [1: swapper/0: 1] [c1] [LCD_TEST] start
<6>[ 0.709045] [1: swapper/0: 1] [c1] gen_panel_attach_mdnie: done
<6>[ 0.709075] [1: swapper/0: 1] [c1] gen_panel_match_backlight, gen-panel-backlight.33, gen-panel-backlight match
<6>[ 0.709106] [1: swapper/0: 1] [c1] gen_panel_backlight_set_brightness: brightness(255), tune_level(350)
<4>[ 0.709106] [1: swapper/0: 1] [c1] [LCD] gen_panel_set_brightness, lcd is inactive
<6>[ 0.709136] [1: swapper/0: 1] [c1] gen_panel_backlight_device_register: done
<6>[ 0.709136] [1: swapper/0: 1] [c1] lcd panel: [LCD] GEN OCTA device init done
<6>[ 0.709167] [1: swapper/0: 1] [c1] [LCD] sprd_panel_probe success
<4>[ 0.709320] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_probe] id = 0
<4>[ 0.709350] [1: swapper/0: 1] [c1] sprdfb: set g_dispc_base_addr = -259219456
<4>[ 0.709381] [1: swapper/0: 1] [c1] sprdfb: return chip id 0x88600022
<4>[ 0.709381] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_panel_get], dev_id = 0
<6>[ 0.709411] [1: swapper/0: 1] [c1] sprdfb: [adapt_panel_from_uboot]: LCD Panel 0x43 is attached!
<4>[ 0.709411] [1: swapper/0: 1] [c1] sprdfb: [panel_mount], dev_id = 0
<4>[ 0.709442] [1: swapper/0: 1] [c1] sprdfb: set g_dsi_base_addr = 0xf08da000
<6>[ 0.709472] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_dsi_init]: dsi has alread initialized
<6>[ 0.709472] [1: swapper/0: 1] [c1] sprdfb: dsi_module_init. call only once!sprdfb: dsi irq_num_1 = 80
<3>[ 0.709533] [1: swapper/0: 1] [c1] sprdfb: dsi request irq int0 OK!
<4>[ 0.709564] [1: swapper/0: 1] [c1] sprdfb: dsi irq_num_2 = 81
<3>[ 0.709594] [1: swapper/0: 1] [c1] sprdfb: dsi request irq int1 OK!
<4>[ 0.709625] [1: swapper/0: 1] [c1] sprdfb: dsi irq_num_3 = 79
<3>[ 0.709655] [1: swapper/0: 1] [c1] sprdfb: dsi request irq int2 OK!
<4>[ 0.709655] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_panel_get] got panel
<6>[ 0.709686] [1: swapper/0: 1] [c1] [LCD] called gen_panel_set_status with status 2
<6>[ 0.709716] [1: swapper/0: 1] [c1] [LCD] gen-panel-nv-read-enable-cmds
<6>[ 0.735107] [1: swapper/0: 1] [c1] [LCD] gen_panel_read_reg: addr:0xc8, len:33
<3>[ 0.746032] I[0: swapper/0: 0] [c0] sprdfb: [dsi_isr0](0x40000)!
<6>[ 0.746093] [1: swapper/0: 1] [c1] [LCD] gen-panel-nv-read-disable-cmds
<4>[ 0.746948] [1: swapper/0: 1] [c1] [LCD] find_cmd_desc: can't find 0x000000B4
<4>[ 0.746978] [1: swapper/0: 1] [c1] [LCD] find_op_cmd_desc: can't find (0xB4) cmd desc
<6>[ 0.746978] [1: swapper/0: 1] [c1] [LCD] gen-panel-nv-read-enable-cmds
<3>[ 0.779968] I[0: swapper/0: 0] [c0] sprdfb: [dsi_isr0](0x40000)!
<6>[ 0.779968] [1: swapper/0: 1] [c1] [LCD] addr:A1h, pos:4, len:7
<3>[ 0.796936] I[0: swapper/0: 0] [c0] sprdfb: [dsi_isr0](0x40000)!
<6>[ 0.796936] [1: swapper/0: 1] [c1] [LCD] addr:A1h, pos:0, len:4
<6>[ 0.796966] [1: swapper/0: 1] [c1] [LCD] gen-panel-nv-read-disable-cmds
<6>[ 0.797027] [1: swapper/0: 1] [c1] gen_panel_coordinate_to_tune_area, x 2983, y 3177, result -35 36 -168 83, area 4
<6>[ 0.797027] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-ui-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797058] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-ui-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797088] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-ui-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797088] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-video-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797119] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-video-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797119] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-video-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797149] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-camera-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797180] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-camera-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797180] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-camera-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797210] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-gallery-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797241] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-gallery-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797241] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-gallery-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797271] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-vt-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797271] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-vt-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797302] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-vt-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797332] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-browser-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797332] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-browser-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797363] [1: swapper/0: 1] [c1] gen-panel-mdnie-dynamic-browser-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797393] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-ui-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797393] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-ui-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797424] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-ui-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797424] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-video-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797454] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-video-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797485] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-video-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797485] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-camera-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797515] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-camera-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797546] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-camera-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797546] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-gallery-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797576] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-gallery-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797576] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-gallery-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797607] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-vt-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797637] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-vt-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797637] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-vt-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.797668] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-browser-mode-cmds, offset 0x6A, old 0xFF, new 0xFF
<6>[ 0.797668] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-browser-mode-cmds, offset 0x6C, old 0xFF, new 0xFF
<6>[ 0.797698] [1: swapper/0: 1] [c1] gen-panel-mdnie-auto-browser-mode-cmds, offset 0x6E, old 0xFF, new 0xFF
<6>[ 0.798919] [1: swapper/0: 1] [c1] sprdfb: got 1536000 bytes logo proc buffer at 0xee800000
<4>[ 0.798980] [1: swapper/0: 1] [c1] sprdfb: sprdfb_dispc_logo_proc[2409]: lcd_base_from_uboot: 0x9f197000, logo_src_v:0xf0a00000
<4>[ 0.798980] [1: swapper/0: 1] [c1] sprdfb: sprdfb_dispc_logo_proc[2410]: logo_dst_p:0xae800000,logo_dst_v:0xee800000
<6>[ 0.814086] [1: swapper/0: 1] [c1] sprdfb: dpi clock is switched from 0Hz to 24000000Hz
<4>[ 0.815155] [1: swapper/0: 1] [c1] sprdfb: 0x402e0004 = 0x13ce35 0x20d00000 = 0x2803 0x71300000 = 0x7c4800
<4>[ 0.815185] [1: swapper/0: 1] [c1] sprdfb: 0x71200034 = 0xf03 0x71200030 = 0x3 0x7120002c = 0x2
<6>[ 0.815216] [1: swapper/0: 1] [c1] sprdfb: [sprdfb_dispc_early_init]: dispc has alread initialized
<6>[ 0.815216] [1: swapper/0: 1] [c1] sprdfb: dispc_module_init. call only once!sprdfb: dispc irq_num = 78
<4>[ 0.815277] [1: swapper/0: 1] [c1] sprdfb: setup_fb_mem--smem_start:9f8ad000,len:4608000,reserved len:4608000
<6>[ 0.815368] [1: swapper/0: 1] [c1] sec_getlog_supply_fbinfo: 0xdf8ad000 480 800 32 0
<6>[ 0.815887] [1: swapper/0: 1] [c1] 70000000.uart: ttyS0 at I/O 0x0 (irq = 34) is a SPX
<4>[ 0.816040] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 48000000
<6>[ 0.816131] [1: swapper/0: 1] [c1] 70100000.uart: ttyS1 at I/O 0x0 (irq = 35) is a SPX
<4>[ 0.816284] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 26000000
<6>[ 0.816345] [1: swapper/0: 1] [c1] 70200000.uart: ttyS2 at I/O 0x0 (irq = 36) is a SPX
<4>[ 0.816497] [1: swapper/0: 1] [c1] bt host wake up type is 2, clk is 26000000
<6>[ 0.816680] [1: swapper/0: 1] [c1] iommu_init, begin
<6>[ 0.816802] [1: swapper/0: 1] [c1] sprd_iommu_probe, begin
<6>[ 0.816833] [1: swapper/0: 1] [c1] sprd_iommu_probe, function name is sprd_iommu_gsp
<6>[ 0.816833] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,name:sprd_iommu_gsp
<6>[ 0.816864] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,iova_base:0x10000000,iova_size:2000000
<6>[ 0.816894] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base phy:0x21400000
<6>[ 0.816925] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base:f0980000,pgt_size:8000
<6>[ 0.816925] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg phy:0x21408000
<6>[ 0.816955] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg:0xf0990000
<6>[ 0.816986] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved fault page addr from dts
<6>[ 0.816986] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, succeed to get reserved fault page, phy:0xaee6b000
<6>[ 0.817016] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved rr page addr
<6>[ 0.817016] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get iommu-rev
<6>[ 0.817138] [1: swapper/0: 1] [c1] sprd_iommu_init, sprd_iommu_gsp, id:0, iova_base:0x10000000, size:0x2000000
<6>[ 0.817169] [1: swapper/0: 1] [c1] pgt_base:0xf0980000,size:0x8000, fault_page:0xaee6b000, rr_page:0x0
<6>[ 0.817169] [1: swapper/0: 1] [c1] fault_page va: eee6b000
<6>[ 0.817413] [1: swapper/0: 1] sprd_iommu_probe, name:sprd_iommu_gsp, dev->pgt:0xeee90000, dev->pool:0xeee6c300 mmu_clock:0xef820100
<6>[ 0.817413] [1: swapper/0: 1] [c1] sprd_iommu_probe, end
<6>[ 0.817474] [1: swapper/0: 1] [c1] sprd_iommu_probe, begin
<6>[ 0.817474] [1: swapper/0: 1] [c1] sprd_iommu_probe, function name is sprd_iommu_mm
<6>[ 0.817504] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,name:sprd_iommu_mm
<6>[ 0.817535] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,iova_base:0x20000000,iova_size:8000000
<6>[ 0.817535] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base phy:0x60f00000
<6>[ 0.817565] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,pgt_base:f09c0000,pgt_size:20000
<6>[ 0.817596] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg phy:0x60f20000
<6>[ 0.817626] [1: swapper/0: 1] [c1] sprd_iommu_get_resource,ctrl_reg:0xf08fc000
<6>[ 0.817626] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved fault page addr from dts
<6>[ 0.817657] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, succeed to get reserved fault page, phy:0xaee6d000
<6>[ 0.817657] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get reserved rr page addr
<6>[ 0.817687] [1: swapper/0: 1] [c1] sprd_iommu_get_resource, can't get iommu-rev
<6>[ 0.817779] [1: swapper/0: 1] [c1] sprd_iommu_mm_init, can't get mm axi clock:fffffffe
<6>[ 0.817779] [1: swapper/0: 1] [c1] sprd_iommu_mm_clk_enable
<6>[ 0.817840] [1: swapper/0: 1] [c1] sprd_iommu_init, sprd_iommu_mm, id:1, iova_base:0x20000000, size:0x8000000
<6>[ 0.817871] [1: swapper/0: 1] [c1] pgt_base:0xf09c0000,size:0x20000, fault_page:0xaee6d000, rr_page:0x0
<6>[ 0.817871] [1: swapper/0: 1] [c1] fault_page va: eee6d000
<6>[ 0.821990] [1: swapper/0: 1] sprd_iommu_mm_clk_disable
<6>[ 0.822418] [1: swapper/0: 1] [c1] sprd_iommu_probe, name:sprd_iommu_mm, dev->pgt:0xeeec0000, dev->pool:0xeee6c9c0 mmu_clock:0xef827580
<6>[ 0.822448] [1: swapper/0: 1] [c1] sprd_iommu_probe, end
<6>[ 0.822479] [1: swapper/0: 1] [c1] iommu_init, end
<6>[ 0.825439] [1: swapper/0: 1] [c1] loop: module loaded
<6>[ 0.825592] [1: swapper/0: 1] [c1] otp register sprd_efuse_otp as miscdevice 59, block 16X32bits
<6>[ 0.825683] [1: swapper/0: 1] [c1] otp register sprd_adie_efuse_otp as miscdevice 58, block 32X8bits
<6>[ 0.825714] [1: swapper/0: 1] [c1] vsp_init called !
<6>[ 0.825805] [1: swapper/0: 1] [c1] vsp_probe called !
<6>[ 0.825836] [1: swapper/0: 1] [c1] vsp_parse_dt called !
<6>[ 0.825866] [1: swapper/0: 1] [c1] sprd_vsp_phys = 60900000
<6>[ 0.825866] [1: swapper/0: 1] [c1] sprd_vsp_base = f09a0000
<6>[ 0.825897] [1: swapper/0: 1] [c1] vsp_glb_reg_base = f09a1000
<6>[ 0.825927] [1: swapper/0: 1] [c1] vsp: irq = 0x4b, version = 0x4
<6>[ 0.825958] [1: swapper/0: 1] [c1] vsp_node_name = clk_vsp
<6>[ 0.825988] [1: swapper/0: 1] [c1] vsp clk order in dts file: clk[0] = (76800000, clk_76m8)
<6>[ 0.826019] [1: swapper/0: 1] [c1] vsp clk order in dts file: clk[1] = (128000000, clk_128m)
<6>[ 0.826049] [1: swapper/0: 1] [c1] vsp clk order in dts file: clk[2] = (192000000, clk_192m)
<6>[ 0.826232] [1: swapper/0: 1] [c1] jpg_init called !
<6>[ 0.826599] [1: swapper/0: 1] [c1] sprd_cproc mem size: 68
<6>[ 0.826629] [1: swapper/0: 1] [c1] sprd_cproc: base 0x88000000
<6>[ 0.826660] [1: swapper/0: 1] [c1] sprd_cproc: base 0x50000000
<6>[ 0.826660] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.826690] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.826721] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.826721] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.826751] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[0] = 0x44
<6>[ 0.826782] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[0] = 0xf0880044
<6>[ 0.826782] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[1] = 0x44
<6>[ 0.826812] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[1] = 0xf0880044
<6>[ 0.826812] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[2] = 0xb0
<6>[ 0.826843] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[2] = 0xf08800b0
<6>[ 0.826843] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[3] = 0xff
<6>[ 0.826873] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[0] = 0x02000000
<6>[ 0.826873] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[1] = 0x10000000
<6>[ 0.826904] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[2] = 0x00000001
<6>[ 0.826934] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[3] = 0x000f0000
<6>[ 0.826934] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[0] = 0xe59f0000
<6>[ 0.826965] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[1] = 0xe12fff10
<6>[ 0.826965] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[2] = 0x88300000
<6>[ 0.826995] [1: swapper/0: 1] [c1] sprd_cproc: cp base = 0x88000000, size = 0x1c00000
<6>[ 0.827026] [1: swapper/0: 1] [c1] sprd_cproc: iram_addr=0x50000000
<6>[ 0.827056] [1: swapper/0: 1] [c1] sprd_cproc: wdt irq 115
<6>[ 0.827056] [1: swapper/0: 1] [c1] sprd_cproc: child node [0] name=modem
<6>[ 0.827087] [1: swapper/0: 1] [c1] sprd_cproc: child node [0] base=0x88300000, size=0x800000
<6>[ 0.827117] [1: swapper/0: 1] [c1] sprd_cproc: child node [1] name=dsp
<6>[ 0.827117] [1: swapper/0: 1] [c1] sprd_cproc: child node [1] base=0x88020000, size=0x220000
<6>[ 0.827148] [1: swapper/0: 1] [c1] sprd_cproc: stop callback 0xc02f75b0, start callback 0xc02f7744
<6>[ 0.827178] [1: swapper/0: 1] [c1] sprd_cproc: pdata=0xeeea9280, of_node=0xc151c584
<6>[ 0.827178] [1: swapper/0: 1] [c1] sprd_cproc_probe 88000000 1c00000
<6>[ 0.827301] [1: swapper/0: 1] [c1] cproc cpw probed!
<6>[ 0.827362] [1: swapper/0: 1] [c1] sprd_cproc mem size: 56
<6>[ 0.827362] [1: swapper/0: 1] [c1] sprd_cproc: base 0x8a800000
<6>[ 0.827392] [1: swapper/0: 1] [c1] sprd_cproc: base 0x50003000
<6>[ 0.827423] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.827423] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.827453] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.827484] [1: swapper/0: 1] [c1] sprd_cproc: base 0x402b0000
<6>[ 0.827484] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[0] = 0x68
<6>[ 0.827514] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[0] = 0xf0880068
<6>[ 0.827514] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[1] = 0x68
<6>[ 0.827545] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[1] = 0xf0880068
<6>[ 0.827545] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[2] = 0xb0
<6>[ 0.827575] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[2] = 0xf08800b0
<6>[ 0.827606] [1: swapper/0: 1] [c1] sprd_cproc before p2v: ctrl_reg[3] = 0xb0
<6>[ 0.827606] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_reg[3] = 0xf08800b0
<6>[ 0.827636] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[0] = 0x02000000
<6>[ 0.827636] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[1] = 0x10000000
<6>[ 0.827667] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[2] = 0x00000004
<6>[ 0.827667] [1: swapper/0: 1] [c1] sprd_cproc: ctrl_mask[3] = 0x00000004
<6>[ 0.827697] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[0] = 0xe59f0000
<6>[ 0.827697] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[1] = 0xe12fff10
<6>[ 0.827728] [1: swapper/0: 1] [c1] sprd_cproc: iram-data[2] = 0x8a808000
<6>[ 0.827758] [1: swapper/0: 1] [c1] sprd_cproc: cp base = 0x8a800000, size = 0x201000
<6>[ 0.827758] [1: swapper/0: 1] [c1] sprd_cproc: iram_addr=0x50003000
<6>[ 0.827789] [1: swapper/0: 1] [c1] sprd_cproc: wdt irq 117
<6>[ 0.827819] [1: swapper/0: 1] [c1] sprd_cproc: child node [0] name=modem
<6>[ 0.827850] [1: swapper/0: 1] [c1] sprd_cproc: child node [0] base=0x8a808000, size=0x201000
<6>[ 0.827850] [1: swapper/0: 1] [c1] sprd_cproc: stop callback 0xc02f75b0, start callback 0xc02f7744
<6>[ 0.827880] [1: swapper/0: 1] [c1] sprd_cproc: pdata=0xeeeaaf00, of_node=0xc151cd80
<6>[ 0.827880] [1: swapper/0: 1] [c1] sprd_cproc_probe 8a800000 201000
<6>[ 0.828002] [1: swapper/0: 1] [c1] cproc cpwcn probed!
<6>[ 0.828704] [1: swapper/0: 1] [c1] sprd_download_init
<4>[ 0.828948] [1: swapper/0: 1] [c1] sprd_power_ctl_init
<3>[ 0.829071] [1: swapper/0: 1] [c1] sprd-gnss not found
<6>[ 0.829528] [1: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.829559] [1: swapper/0: 1] [c1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.829925] [1: swapper/0: 1] [c1] PPP generic driver version 2.4.2
<6>[ 0.830047] [1: swapper/0: 1] [c1] PPP BSD Compression module registered
<6>[ 0.830047] [1: swapper/0: 1] [c1] PPP Deflate Compression module registered
<6>[ 0.830078] [1: swapper/0: 1] [c1] PPP MPPE Compression module registered
<6>[ 0.830108] [1: swapper/0: 1] [c1] NET: Registered protocol family 24
<6>[ 0.830139] [1: swapper/0: 1] [c1] PPTP driver version 0.8.5
<6>[ 0.830535] [1: swapper/0: 1] [c1] usbcore: registered new interface driver usbserial
<6>[ 0.830688] [1: swapper/0: 1] [c1] dwc_otg: version 2.81a 04-FEB-2009
<6>[ 0.830718] [1: swapper/0: 1] [c1] Working version No 007 - 10/24/2007
<6>[ 0.830871] [1: swapper/0: 1] [c1] Usb_hw.c: [usb_phy_init]usb phy tune from uboot: 0xd0a00020
<6>[ 0.830902] [1: swapper/0: 1] [c1] Usb_hw.c: [usb_phy_init]usb tune_ctrl1_value: 0x1730
<6>[ 0.830932] [1: swapper/0: 1] [c1] usb_phy_init ctrl0 value = 0xd0a00020
<6>[ 0.830932] [1: swapper/0: 1] [c1] usb_phy_init ctrl1 value = 0x1730
<6>[ 0.831085] [1: swapper/0: 1] [c1] udc_enable
<6>[ 0.858459] [1: swapper/0: 1] [c1] usb_startup ctrl0 value = 0xd0a00020
<6>[ 0.858489] [1: swapper/0: 1] [c1] usb_startup ctrl1 value = 0x1730
<4>[ 1.063598] [1: swapper/0: 1] [c1] Core Release: 2.94a
<4>[ 1.063629] [1: swapper/0: 1] [c1] Setting default values for core params
<4>[ 1.065887] [1: swapper/0: 1] [c1] Dedicated Tx FIFOs mode
<6>[ 1.066436] [1: swapper/0: 1] [c1] usb_notifier: register_otg_func
<6>[ 1.066558] [1: swapper/0: 1] [c1] USB:shutdown udc
<6>[ 1.066589] [1: swapper/0: 1] [c1] udc_disable
<6>[ 1.066955] [1: swapper/0: 1] [c1] usb_notify: ovc_init
<6>[ 1.066986] [1: swapper/0: 1] [c1] usb_notifier: usb_notifier_init +
<6>[ 1.067169] [1: swapper/0: 1] [c1] usb_notifier: usb_notifier_probe +
<6>[ 1.067169] [1: swapper/0: 1] [c1] usb_notifier usb_notifier.29: usb_notifier_probe +
<6>[ 1.067199] [1: swapper/0: 1] [c1] usb_notifier: of_usb_notifier_dt+
<3>[ 1.067230] [1: swapper/0: 1] [c1] usb_notifier: of_usb_notifier_dt, cannot get booster-gpio, ret=-2
<6>[ 1.067230] [1: swapper/0: 1] [c1] usb_notifier: of_usb_notifier_dt- ret:0
<6>[ 1.067260] [1: swapper/0: 1] [c1] usb_notify: set_otg_notify
<6>[ 1.067260] [1: swapper/0: 1] [c1] usb_notify: registered otg_notify +
<6>[ 1.067291] [1: swapper/0: 1] [c1] usb_notify: registered otg_notify -
<6>[ 1.067321] [1: swapper/0: 1] [c1] usb_notifier: find_and_register_boosters, booster-name=sm5701_booster
<6>[ 1.067321] [1: swapper/0: 1] [c1] usb_notifier usb_notifier.29: usb_notifier_probe -
<6>[ 1.067352] [1: swapper/0: 1] [c1] usb_notifier: usb_notifier_probe -
<6>[ 1.067626] [1: swapper/0: 1] [c1] sci_keypad_parse_dt: 0, 0, 115
<6>[ 1.067657] [1: swapper/0: 1] [c1] sci_keypad_parse_dt: 0, 2, 115
<6>[ 1.067657] [1: swapper/0: 1] [c1] sci_keypad_parse_dt: 0, 1, 172
<6>[ 1.069885] [1: swapper/0: 1] [c1] input: sci-keypad as /devices/40250000.keypad/input/input1
<4>[ 1.070281] [1: swapper/0: 1] [c1] sprd_eic_button_sysfs_init success
<4>[ 1.070434] [1: swapper/0: 1] [c1] tc300k_parse_dt vcc_en-gpio 134
<4>[ 1.070465] [1: swapper/0: 1] [c1] tc300k_parse_dt scl-gpio 27
<4>[ 1.070495] [1: swapper/0: 1] [c1] tc300k_parse_dt sda-gpio 28
<4>[ 1.070495] [1: swapper/0: 1] [c1] tc300k_parse_dt irq-gpio 132
<4>[ 1.070526] [1: swapper/0: 1] [c1] tc300k_parse_dt firm-up 1
<4>[ 1.070526] [1: swapper/0: 1] [c1] tc300k_parse_dt fw_name coreriver/j1x3g.fw
<4>[ 1.070556] [1: swapper/0: 1] [c1] tc300k_parse_dt ext_fw_name /sdcard/j1x3g_tk.bin
<6>[ 1.070587] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: TKEY_EN 3.3V on is finished.
<6>[ 1.395416] [1: swapper/0: 1] [c1] input: sec_touchkey as /devices/i2c_gpio.10/i2c-3/3-0020/input/input2
<6>[ 1.395751] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: BIN: fw 0x3 is loaded (size=7072)
<3>[ 1.395812] [3:irq/293-sec_tou: 85] [c3] sec_touchkey 3-0020: can't excute tc300k_interrupt
<6>[ 1.396759] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: IC fw_ver(3)
<6>[ 1.397766] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: IC fw_ver(0x3), module_ver(0x11)
<6>[ 1.397796] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: IC aleady have latest firmware (0x3)
<3>[ 1.397796] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: success to flash fw (1)
<6>[ 1.397827] [1: swapper/0: 1] [c1] sec_touchkey 3-0020: successfully probed.
<6>[ 1.397979] [1: swapper/0: 1] [c1] [TSP] bt432_power_control, 2
<6>[ 1.425262] [1: swapper/0: 1] [c1] bt432_ts 1-0020: power on!
<6>[ 1.426513] [1: swapper/0: 1] [c1] bt432_ts 1-0020: bt432_power_sequence: chip code = 0xe200
<6>[ 1.475982] [1: swapper/0: 1] [c1] bt432_ts 1-0020: init_touch: Check checksum
<6>[ 1.476684] [1: swapper/0: 1] [c1] bt432_ts 1-0020: 0x55AA
<6>[ 1.477539] [1: swapper/0: 1] [c1] bt432_ts 1-0020: init_touch: Send reset command
<6>[ 1.483398] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 1914] Shift value = 3
<6>[ 1.484100] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 1920] N count = 20
<6>[ 1.484802] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 1925] u count = 2
<6>[ 1.485534] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 1930] afe frequency = 25
<6>[ 1.487609] [1: swapper/0: 1] [c1] bt432_ts 1-0020: cur version = 0x2, new version = 0x2
<6>[ 1.487640] [1: swapper/0: 1] [c1] bt432_ts 1-0020: cur minor version = 0x7, new minor version = 0x7
<6>[ 1.487670] [1: swapper/0: 1] [c1] bt432_ts 1-0020: cur reg data version = 0x8, new reg data version = 0x8
<6>[ 1.490417] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 2022] max supported finger num = 5
<6>[ 1.490447] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 2025] set other configuration
<4>[ 1.492156] [1: swapper/0: 1] [c1] use i2s checksum = 0
<6>[ 1.492706] [1: swapper/0: 1] [c1] bt432_ts 1-0020: TA setting changed to 0
<6>[ 1.497772] [1: swapper/0: 1] [c1] bt432_ts 1-0020: Esd timer register = 100
<6>[ 1.497772] [1: swapper/0: 1] [c1] bt432_ts[init_touch : 2079] successfully initialized
<6>[ 1.497802] [1: swapper/0: 1] [c1] bt432_ts[bt432_ts_probe : 4844] register sec_touchscreen input device
<6>[ 1.497985] [1: swapper/0: 1] [c1] input: sec_touchscreen as /devices/70600000.i2c/i2c-1/1-0020/input/input3
<6>[ 1.498077] [1: swapper/0: 1] [c1] bt432_ts[bt432_ts_probe : 4861] request irq (irq = 393, pin = 232)
<6>[ 1.498260] [1: swapper/0: 1] [c1] bt432_ts 1-0020: Started esd timer
<6>[ 1.498413] [1: swapper/0: 1] [c1] bt432_ts 1-0020: zinitix touch probe.
<3>[ 1.498443] [0:irq/393-bt432_t: 87] [c0] bt432_ts 1-0020: Invalid interrupt
<6>[ 1.499084] [1: swapper/0: 1] [c1] sprd_rtc 40038080.rtc: rtc core: registered sprd_rtc as rtc0
<4>[ 1.499267] [1: swapper/0: 1] [c1] After init RTC time: 2018-1-5 3:12:34
<6>[ 1.499298] [1: swapper/0: 1] [c1] i2c /dev entries driver
<1>[ 1.499816] [1: swapper/0: 1] [c1] sprd_img_probe called
<1>[ 1.499938] [1: swapper/0: 1] [c1] sprd_img_probe Success
<6>[ 1.500213] [1: swapper/0: 1] [c1] Video Technology Magazine Virtual Video Capture Board ver 1.0.0 successfully loaded.
<6>[ 1.500549] [1: swapper/0: 1] [c1] rot_k_init called !
<1>[ 1.500640] [1: swapper/0: 1] [c1] rot_k_probe called
<1>[ 1.500701] [1: swapper/0: 1] [c1] rot_k_probe Success
<4>[ 1.500793] [1: swapper/0: 1] [c1] gsp_drv_init enter!
<4>[ 1.500885] [1: swapper/0: 1] [c1] gsp_drv_probe,AHB clock :3
<4>[ 1.500946] [1: swapper/0: 1] [c1] gsp: irq = 83, g_gsp_base_addr = 0xf0bec000,
<6>[ 1.500976] [1: swapper/0: 1] [c1] gsp: get emc clk_parent ok!
<6>[ 1.501007] [1: swapper/0: 1] [c1] gsp: get emc clk ok!
<6>[ 1.501037] [1: swapper/0: 1] [c1] gsp: gsp set emc clk parent ok!
<6>[ 1.501037] [1: swapper/0: 1] [c1] gsp: get clk_parent ok!
<6>[ 1.501068] [1: swapper/0: 1] [c1] gsp: get clk ok!
<6>[ 1.501098] [1: swapper/0: 1] [c1] gsp: gsp set clk parent ok!
<6>[ 1.501251] [1: swapper/0: 1] [c1] sensor_k_init called !
<1>[ 1.501342] [1: swapper/0: 1] [c1] sensor probe called
<4>[ 1.501525] [1: swapper/0: 1] [c1] sensor: can't find gpio pwn 2 (errno = -2)
<4>[ 1.501556] [1: swapper/0: 1] [c1] sensor: can't find gpio reset 2 (errno = -2)
<4>[ 1.501586] [1: swapper/0: 1] [c1] sensor: can't find GPIO_SUBDVDD (errno = 0)
<4>[ 1.501617] [1: swapper/0: 1] [c1] sensor: can't find GPIO_SUB2DVDD (errno = -2)
<4>[ 1.501647] [1: swapper/0: 1] [c1] sensor: can't find GPIO_FLASH_EN (errno = 0)
<4>[ 1.501678] [1: swapper/0: 1] [c1] sensor: can't find GPIO_SWITCH_MODE (errno = 0)
<4>[ 1.501708] [1: swapper/0: 1] [c1] sensor: can't find GPIO_MIPI_SWITCH_EN (errno = -2)
<4>[ 1.501739] [1: swapper/0: 1] [c1] sensor: can't find GPIO_MIPI_SWITCH_MODE (errno = -2)
<4>[ 1.501770] [1: swapper/0: 1] [c1] sensor: can't find GPIO_MAINCAM_ID (errno = -2)
<4>[ 1.501800] [1: swapper/0: 1] [c1] sensor register sub device E
<4>[ 1.501953] [1: swapper/0: 1] [c1] sensor dev0 i2c device 0x3c sensor_main
<4>[ 1.501983] [1: swapper/0: 1] [c1] sensor dev1 i2c device 0x21 sensor_sub
<4>[ 1.502258] [1: swapper/0: 1] [c1] sensor register sub device success
<1>[ 1.502380] [1: swapper/0: 1] [c1] sensor prb Success
<4>[ 1.502685] [1: swapper/0: 1] [c1] isp_init: success.
<4>[ 1.502990] [1: swapper/0: 1] [c1] isp_probe: success.
<6>[ 1.503051] [1: swapper/0: 1] [c1] [sec_fuelgauge_init] start !!!!!
<6>[ 1.503112] [1: swapper/0: 1] [c1] sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
<6>[ 1.503234] [1: swapper/0: 1] [c1] sec_hal_fg_get_property-45,val->intval = 500
<6>[ 1.503265] [1: swapper/0: 1] [c1] register sec_hal_fg_init
<4>[ 1.503265] [1: swapper/0: 1] [c1] sprdbat pdata: chg_bat_safety_vol:4600
<4>[ 1.503295] [1: swapper/0: 1] [c1] sprdbat pdata: irq_fgu:469
<4>[ 1.503295] [1: swapper/0: 1] [c1] sprdbat pdata: fgu_mode:0
<4>[ 1.503326] [1: swapper/0: 1] [c1] sprdbat pdata: alm_soc:5
<4>[ 1.503326] [1: swapper/0: 1] [c1] sprdbat pdata: alm_vol:3450
<4>[ 1.503356] [1: swapper/0: 1] [c1] sprdbat pdata: soft_vbat_uvlo:3050
<4>[ 1.503356] [1: swapper/0: 1] [c1] sprdbat pdata: soft_vbat_ovp:0
<4>[ 1.503387] [1: swapper/0: 1] [c1] sprdbat pdata: rint:280
<4>[ 1.503417] [1: swapper/0: 1] [c1] sprdbat pdata: cnom:2040
<4>[ 1.503417] [1: swapper/0: 1] [c1] sprdbat pdata: rsense_real:198
<4>[ 1.503448] [1: swapper/0: 1] [c1] sprdbat pdata: rsense_spec:200
<4>[ 1.503448] [1: swapper/0: 1] [c1] sprdbat pdata: relax_current:50
<4>[ 1.503479] [1: swapper/0: 1] [c1] sprdbat pdata: fgu_cal_ajust:0
<4>[ 1.503479] [1: swapper/0: 1] [c1] sprdbat pdata: qmax_update_period:0
<4>[ 1.503509] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab_size:21
<4>[ 1.503509] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=0 x:4360,y:100
<4>[ 1.503540] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=1 x:4305,y:95
<4>[ 1.503540] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=2 x:4247,y:90
<4>[ 1.503570] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=3 x:4189,y:85
<4>[ 1.503570] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=4 x:4132,y:80
<4>[ 1.503601] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=5 x:4079,y:75
<4>[ 1.503601] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=6 x:4030,y:70
<4>[ 1.503631] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=7 x:3986,y:65
<4>[ 1.503631] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=8 x:3936,y:60
<4>[ 1.503662] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=9 x:3885,y:55
<4>[ 1.503692] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=10 x:3853,y:50
<4>[ 1.503692] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=11 x:3828,y:45
<4>[ 1.503723] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=12 x:3809,y:40
<4>[ 1.503723] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=13 x:3793,y:35
<4>[ 1.503753] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=14 x:3780,y:30
<4>[ 1.503753] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=15 x:3764,y:25
<4>[ 1.503784] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=16 x:3743,y:20
<4>[ 1.503784] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=17 x:3712,y:15
<4>[ 1.503814] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=18 x:3687,y:10
<4>[ 1.503814] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=19 x:3672,y:5
<4>[ 1.503845] [1: swapper/0: 1] [c1] sprdbat pdata: ocv_tab i=20 x:3400,y:0
<4>[ 1.503875] [1: swapper/0: 1] [c1] sprdbat pdata: cnom_temp_tab i=0 x:25,y:2040
<4>[ 1.503875] [1: swapper/0: 1] [c1] sprdbat pdata: cnom_temp_tab i=1 x:10,y:1920
<4>[ 1.503906] [1: swapper/0: 1] [c1] sprdbat pdata: cnom_temp_tab i=2 x:0,y:1830
<4>[ 1.503906] [1: swapper/0: 1] [c1] sprdbat pdata: rint_temp_tab i=0 x:25,y:280
<4>[ 1.503936] [1: swapper/0: 1] [c1] sprdbat pdata: rint_temp_tab i=1 x:10,y:430
<4>[ 1.503936] [1: swapper/0: 1] [c1] sprdbat pdata: rint_temp_tab i=2 x:0,y:500
<4>[ 1.504058] [1: swapper/0: 1] [c1] sci_efuse_fgu_cal_get 4.2 data data:0xfc
<4>[ 1.504119] [1: swapper/0: 1] [c1] sci_efuse_fgu_cal_get 3.6 data data:0x6
<4>[ 1.504180] [1: swapper/0: 1] [c1] sci_efuse_fgu_cal_get 0 data data:0x9f
<4>[ 1.504211] [1: swapper/0: 1] [c1] sprdfgu fgu_data: 0xb2f 0x99f,0x1f9f,0x0!
<4>[ 1.504211] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_from_chip
<4>[ 1.504241] [1: swapper/0: 1] [c1] sprdfgu: one point
<4>[ 1.504241] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_data.pdata->fgu_cal_ajust = 0
<4>[ 1.504272] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_init fgu_nv_4200mv = 2863,fgu_nv_3600mv = 0,fgu_0_cur_adc = 0
<4>[ 1.504272] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_init fgu_cal.cur_1000ma_adc = 2701,fgu_cal.vol_1000mv_adc = 682,fgu_cal.vol_offset = 0,fgu_cal.cur_offset = 0
<6>[ 1.504302] [1: swapper/0: 1] [c1] sprdfgu: FGU_Init
<4>[ 1.504486] [1: swapper/0: 1] [c1] sprdfgu: fgu delta_vol_raw: 0xa8f delta_current_raw 0x23f3!
<4>[ 1.504486] [1: swapper/0: 1] [c1] sprdfgu: fgu cmd_vol_raw: 0x0 cmd_cur_raw 0x0!
<3>[ 1.504516] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_cal_battery_impedance warning.....!
<6>[ 1.504547] [1: swapper/0: 1] [c1] sprdfgu: REG_FGU_USER_AREA_STATUS- = 0x5032
<6>[ 1.504608] [1: swapper/0: 1] [c1] sprdfgu: NORMAIL_POWERTON-- sprdfgu_data.init_cap= 50
<6>[ 1.504760] [1: swapper/0: 1] [c1] sprdfgu: pocv_raw = 0xa41,pocv_voltage = 3848
<6>[ 1.504791] [1: swapper/0: 1] [c1] sprdfgu: current voltage raw_data = 0xa8f,cur voltage = 3963
<6>[ 1.504791] [1: swapper/0: 1] [c1] sprdfgu: ocv_raw: 0xa77,ocv voltage = 3928
<6>[ 1.504821] [1: swapper/0: 1] [c1] sprdfgu: current_raw: 0x23f3,current = 374
<6>[ 1.504852] [1: swapper/0: 1] [c1] sprdfgu: poweron_clbcnt: 0x12eacf0,cur_cc0x12eacf0
<6>[ 1.504882] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_data.poweron_rint = 280
<6>[ 1.505249] [1: swapper/0: 1] [c1] sprdfgu: sprdfgu_init end
<3>[ 1.505401] [1: swapper/0: 1] [c1] power_supply sec-fuelgauge: driver failed to report `status' property: -22
<4>[ 1.505523] [1: swapper/0: 1] [c1] thermal thermal_zone0: failed to read out thermal zone 0
<3>[ 1.505584] [1: kworker/1:1: 56] [c1] power_supply sec-fuelgauge: driver failed to report `status' property: -22
<6>[ 1.505615] [1: swapper/0: 1] [c1] sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
<6>[ 1.505767] [1: swapper/0: 1] [c1] sprd_wdt_sys: SC8830 Watchdog: userspace watchdog feeder
<6>[ 1.506103] [1: swapper/0: 1] [c1] sprd_wdt_sys: watchdog enable
<6>[ 1.506286] [1: swapper/0: 1] [c1] sprd_wdt_sys: SC8830 Watchdog: chip margin 15 sec
<6>[ 1.506286] [1: swapper/0: 1] [c1] sprd_wdt_sys: SC8830 Watchdog: ap margin 12 sec
<6>[ 1.506317] [1: swapper/0: 1] [c1] sprd_wdt_sys: SC8830 Watchdog: ca7 margin 10 sec
<6>[ 1.506347] [1: swapper/0: 1] [c1] sprd_wdt_sys: SC8830 Watchdog: ca7 irq margin 9 sec
<6>[ 1.506713] [1: swapper/0: 1] [c1] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
<6>[ 1.507568] [2: swapper/0: 1] [c2] cpuidle: using governor ladder
<6>[ 1.507995] [2: swapper/0: 1] [c2] cpuidle: using governor menu
<4>[ 1.508270] [2: swapper/0: 1] [c2] sdhost_drv_init deviceName:sdio_emmc
<4>[ 1.508453] [2: swapper/0: 1] [c2] sdhost_drv_init deviceName:sdio_sd
<4>[ 1.508605] [2: swapper/0: 1] [c2] sdhost_drv_init deviceName:sdio_wifi
<3>[ 1.508819] [2: swapper/0: 1] [c2] get() with no identifier
<4>[ 1.508850] [2: swapper/0: 1] [c2] sdhost sdio_emmc: no SD_pwr regulator found
<3>[ 1.508850] [2: swapper/0: 1] [c2] get() with no identifier
<4>[ 1.508880] [2: swapper/0: 1] [c2] sdhost sdio_emmc: no _1_8V_signal regulator found
<4>[ 1.508911] [2: swapper/0: 1] [c2] sdhost sdio_emmc run PM init
<4>[ 1.509094] [2: swapper/0: 1] [c2] sdhost sdio_emmc there is no signal voltage!
<4>[ 1.509124] [2: swapper/0: 1] [c2] sdhost sdio_emmc There is no signalling voltage
<4>[ 1.525268] [2: swapper/0: 1] [c2] sdhost sdio_emmc there is no signal voltage!
<4>[ 1.545318] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc: sdhost_hw_reset start.
<4>[ 1.545349] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc there is no signal voltage!
<4>[ 1.545532] [2: swapper/0: 1] [c2] vddsdio: Failed to create debugfs directory
<6>[ 1.545593] [2: swapper/0: 1] [c2] event:0x40, best_data:0x2dc6c0
<6>[ 1.545623] [2: swapper/0: 1] [c2] sc271x_regulator_event()->Line:404, --REGULATOR_EVENT_VOLTAGE_CHANGE--> vddsdio event 64, data 3000000
<4>[ 1.545654] [2: swapper/0: 1] [c2] sdhost sdio_sd run PM init
<4>[ 1.545806] [2: swapper/0: 1] [c2] sdhost sdio_sd signal voltage enable success!
<6>[ 1.585296] [2: swapper/0: 1] [c2] *** register_pm_notifier, nb->notifier_call:mmc_pm_notify ***
<3>[ 1.585815] [2: swapper/0: 1] [c2] get() with no identifier
<4>[ 1.585815] [2: swapper/0: 1] [c2] sdhost sdio_wifi: no SD_pwr regulator found
<3>[ 1.585845] [2: swapper/0: 1] [c2] get() with no identifier
<4>[ 1.585845] [2: swapper/0: 1] [c2] sdhost sdio_wifi: no _1_8V_signal regulator found
<4>[ 1.585876] [2: swapper/0: 1] [c2] sdhost sdio_wifi run PM init
<4>[ 1.585998] [2: swapper/0: 1] [c2] sdhost sdio_wifi there is no signal voltage!
<4>[ 1.586029] [2: swapper/0: 1] [c2] sdhost sdio_wifi There is no signalling voltage
<4>[ 1.605285] [2: swapper/0: 1] [c2] sdhost sdio_wifi there is no signal voltage!
<6>[ 1.625549] [2: swapper/0: 1] [c2] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.626708] [2: swapper/0: 1] [c2] Successfully registered hid_synaptics_driver
<6>[ 1.627746] [2: swapper/0: 1] [c2] usbcore: registered new interface driver usbhid
<6>[ 1.627777] [2: swapper/0: 1] [c2] usbhid: USB HID core driver
<6>[ 1.627929] [2: swapper/0: 1] [c2] sprd_ion_parse_dt: num_heaps=3
<6>[ 1.628082] [2: swapper/0: 1] [c2] sprd_ion_parse_dt: heaps[0]: ion_heap_system type: 0 base: 0 size 0
<6>[ 1.628204] [2: swapper/0: 1] [c2] sprd_ion_parse_dt: heaps[1]: ion_heap_carveout_mm type: 0 base: 2558525440 size 118489088
<6>[ 1.628326] [2: swapper/0: 1] [c2] sprd_ion_parse_dt: heaps[2]: ion_heap_carveout_overlay type: 2 base: 2681282560 size 3072000
<6>[ 1.631286] [3: swapper/0: 1] [c3] ion_init,result:0
<6>[ 1.631805] [0: swapper/0: 1] [c0] ashmem: initialized
<6>[ 1.632171] [0: swapper/0: 1] [c0] logger: created 512K log 'log_main'
<6>[ 1.632537] [0: swapper/0: 1] [c0] logger: created 512K log 'log_events'
<6>[ 1.632904] [0: swapper/0: 1] [c0] logger: created 512K log 'log_radio'
<6>[ 1.633239] [0: swapper/0: 1] [c0] logger: created 512K log 'log_system'
<6>[ 1.633270] [0: swapper/0: 1] [c0] sec_getlog_supply_loggerinfo: 0xeeb80000 0xee480000 0xee400000 0xee500000
<6>[ 1.633911] [0: swapper/0: 1] [c0] sec_logbuf_conf_memtype: size_of_log_ptr:4 size_of_log_mag:4size_struct_sec_log_buffer:24
<6>[ 1.633972] [0: swapper/0: 1] [c0] sec_logbuf_conf_memtype: Addresses: struct sec_log_buffer:f2000000 sec_log_buf:0xf2000018_log_ptr:f20ffe18 sec_log_mag:f20ffe1c
<6>[ 1.634002] [0: swapper/0: 1] [c0] sec_logbuf_conf_memtype: *sec_log_mag:4d474f4c *sec_log_ptr:7f7ae sec_log_buf:f2000018 sec_log_size:1048064
<6>[ 1.749359] [0: swapper/0: 1] [c0] sec_log_save_old: saved old log at 522158@ee580000
<6>[ 1.749359] [0: swapper/0: 1] [c0] sec_getlog_supply_kloginfo: 0xf2000018
<6>[ 1.749938] [0: swapper/0: 1] [c0] sprd_adc_probe()->Line: 365
<6>[ 1.750579] [0: swapper/0: 1] [c0] BM_INFO Bus Monitor mode: 0 - Pref; 1 - Debug. Current mode 1
<4>[ 1.750610] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not AP/ZIP chn!
<4>[ 1.750610] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not CP0 ARM0/1 chn!
<4>[ 1.750640] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not CP1 LTE chn!
<4>[ 1.750671] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not CP1 DSP chn!
<4>[ 1.750671] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not CP1 ARM chn!
<4>[ 1.750732] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not AP HSIC chn!
<4>[ 1.750732] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not AP OTG chn!
<4>[ 1.750762] [0: swapper/0: 1] [c0] BM_WRN it must be sure that there is not AP NANDC chn!
<3>[ 1.751495] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: dram: 0x80000000 ~ 0xBFFBFFFF
<3>[ 1.751525] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: ap_1: 0x80000000 ~ 0x877FFFFF
<3>[ 1.751525] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: shm : 0x87800000 ~ 0x879FFFFF
<3>[ 1.751556] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: ap_2: 0x87A00000 ~ 0x87FFFFFF
<3>[ 1.751556] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: cpge: 0x00000000 ~ 0x00000000
<3>[ 1.751586] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: cpw : 0x88000000 ~ 0x89BFFFFF
<3>[ 1.751617] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: cpwcn: 0x8A800000 ~ 0x8AA00FFF
<3>[ 1.751617] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: cptl: 0x00000000 ~ 0x00000000
<3>[ 1.751647] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: smsg: 0x89BFF000 ~ 0x89BFFFFF
<3>[ 1.751678] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: ap_3: 0x8AA01000 ~ 0x9F8ACFFF
<3>[ 1.751678] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: fb : 0x9F8AD000 ~ 0x9FD11FFF
<3>[ 1.751708] [0: swapper/0: 1] [c0] BM_ERR sci_bm_get_mem_layout: ion : 0x9FD12000 ~ 0x9FFFFFFF
<3>[ 1.751739] [0: swapper/0: 1] [c0] BM_ERR Bus Monitor default config set success!!!
<6>[ 1.751770] [0: swapper/0: 1] [c0] BM_INFO sci_bm_probe done!
<3>[ 1.751831] [0: swapper/0: 1] [c0] cpufreq_scx35: soc_is_sc7715 error chip id
<6>[ 1.785278] [0: swapper/0: 1] [c0] cpufreq_scx35: Select freq table according to p_binning_data=2
<6>[ 1.785308] [0: swapper/0: 1] [c0] cpufreq_scx35: sprd_freq_table_init
<6>[ 1.788024] [0: swapper/0: 1] [c0] cpufreq_scx35: sprd_cpufreq_init policy->cpu=0, policy->cur=1200000, ret=0
<4>[ 1.788330] [0: swapper/0: 1] [c0] vibrator_init: manual voltage:208
<4>[ 1.788391] [0: swapper/0: 1] [c0] locate in sprd_init_vibrator!
<6>[ 1.788696] [0: swapper/0: 1] [c0] spipe: after parse device tree, name=spipe_w, dst=2, channel=4, ringnr=11, rxbuf_size=4096, txbuf_size=4096
<6>[ 1.789672] [0: swapper/0: 1] [c0] spipe: after parse device tree, name=slog_w, dst=2, channel=5, ringnr=1, rxbuf_size=262144, txbuf_size=32768
<6>[ 1.790069] [0: swapper/0: 1] [c0] spipe: after parse device tree, name=stty_w, dst=2, channel=6, ringnr=32, rxbuf_size=2048, txbuf_size=2048
<6>[ 1.792205] [0: swapper/0: 1] [c0] spipe: after parse device tree, name=spipe_wcn, dst=3, channel=4, ringnr=12, rxbuf_size=4096, txbuf_size=4096
<6>[ 1.792449] [3: sbuf-2-6: 100] [c3] sbuf-2-6 is ready!
<6>[ 1.792480] [0: sbuf-2-4: 98] [c0] sbuf-2-4 is ready!
<6>[ 1.792510] [3: sbuf-2-5: 99] [c3] sbuf-2-5 is ready!
<3>[ 1.792724] [3: sbuf-3-4: 101] [c3] Failed to open channel 4
<6>[ 1.793273] [1: swapper/0: 1] [c1] spipe: after parse device tree, name=slog_wcn, dst=3, channel=5, ringnr=1, rxbuf_size=262144, txbuf_size=32768
<3>[ 1.793548] [3: sbuf-3-5: 102] [c3] Failed to open channel 5
<6>[ 1.793792] [1: swapper/0: 1] [c1] SETH: after parse device tree, name=rmnet0, dst=2, channel=7, blocknum=64
<6>[ 1.794647] [1: swapper/0: 1] [c1] SETH: after parse device tree, name=rmnet1, dst=2, channel=8, blocknum=64
<6>[ 1.795379] [1: swapper/0: 1] [c1] SETH: after parse device tree, name=rmnet2, dst=2, channel=9, blocknum=64
<6>[ 1.795776] [3: sblock-2-7: 103] [c3] sblock-2-7 is ready!
<6>[ 1.796112] [1: swapper/0: 1] [c1] [SENSOR] cm36672p_i2c_probe: start
<6>[ 1.796203] [3: sblock-2-8: 104] [c3] sblock-2-8 is ready!
<6>[ 1.796203] [1: swapper/0: 1] [c1] [SENSOR] cm36672p_parse_dt: initial CONF1 = 0x3A0, CONF3 = 0x4110
<6>[ 1.796234] [1: swapper/0: 1] [c1] [SENSOR] proximity_regulator_onoff: on
<6>[ 1.796569] [3: sblock-2-9: 105] [c3] sblock-2-9 is ready!
<6>[ 1.825286] [1: swapper/0: 1] [c1] [SENSOR] proximity_vled_onoff: on
<6>[ 1.825408] [1: swapper/0: 1] [c1] event:0x40, best_data:0x325aa0
<6>[ 1.825408] [1: swapper/0: 1] [c1] sc271x_regulator_event()->Line:404, --REGULATOR_EVENT_VOLTAGE_CHANGE--> vddsim2 event 64, data 3300000
<4>[ 1.855163] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc there is no signal voltage!
<4>[ 1.855194] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc There is no signalling voltage
<4>[ 1.875122] [3: kworker/u8:0: 6] [c3] sdhost sdio_emmc there is no signal voltage!
<4>[ 1.895172] [0: kworker/u8:0: 6] [c0] sdhost sdio_emmc: sdhost_hw_reset end.
<4>[ 1.895507] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.895843] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.899383] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.899749] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.900085] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.900421] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.900787] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.901123] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.901458] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.901794] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<4>[ 1.902160] I[0: swapper/0: 0] [c0] sdhost sdio_emmc int 0x18000
<6>[ 1.916809] [2: swapper/0: 1] [c2] input: proximity_sensor as /devices/virtual/input/input4
<6>[ 1.917724] [0:irq/400-proximi: 106] [c0] [SENSOR] proximity_irq_thread_fn: val = 1, ps_data = 0 (close:0, far:1)
<6>[ 1.918182] [2: swapper/0: 1] [c2] [SENSOR] proximity_vled_onoff: off
<6>[ 1.918304] [2: swapper/0: 1] [c2] event:0x40, best_data:0x325aa0
<6>[ 1.918304] [2: swapper/0: 1] [c2] sc271x_regulator_event()->Line:404, --REGULATOR_EVENT_VOLTAGE_CHANGE--> vddsim2 event 64, data 3300000
<6>[ 1.918334] [2: swapper/0: 1] [c2] event:0x80, best_data:0x0
<6>[ 1.918365] [2: swapper/0: 1] [c2] sc271x_regulator_event()->Line:420, --REGULATOR_EVENT_DISABLE--> vddsim2 event 128
<6>[ 1.937835] [0: kworker/u8:0: 6] [c0] mmc0: BKOPS_EN bit is not set
<4>[ 1.940032] [0: kworker/u8:0: 6] [c0] mmc0: mmc_init_card success
<6>[ 1.940063] [0: kworker/u8:0: 6] [c0] mmc0: new high speed DDR MMC card at address 0001
<7>[ 1.940246] [0: kworker/u8:0: 6] [c0] sprd-sdio-card mmc0:0001: no of_node; not parsing pinctrl DT
<4>[ 1.940277] [0: kworker/u8:0: 6] [c0] sprd-sdio-card: probe of mmc0:0001 failed with error -22
<7>[ 1.940307] [0: kworker/u8:0: 6] [c0] mmcblk mmc0:0001: no of_node; not parsing pinctrl DT
<6>[ 1.940734] [1: kworker/u8:0: 6] [c1] mmcblk0: mmc0:0001 FN12AB 7.28 GiB
<6>[ 1.941070] [1: kworker/u8:0: 6] [c1] mmcblk0boot0: mmc0:0001 FN12AB partition 1 4.00 MiB
<6>[ 1.941467] [1: kworker/u8:0: 6] [c1] mmcblk0boot1: mmc0:0001 FN12AB partition 2 4.00 MiB
<6>[ 1.941802] [1: kworker/u8:0: 6] [c1] mmcblk0rpmb: mmc0:0001 FN12AB partition 3 4.00 MiB
<6>[ 1.945220] [3: swapper/0: 1] [c3] [SENSOR] proximity_regulator_onoff: off
<6>[ 1.945251] [3: swapper/0: 1] [c3] [SENSOR] cm36672p_i2c_probe: success
<4>[ 1.945343] [1: kworker/u8:0: 6] [c1] GPT:Primary header thinks Alt. header is not at the end of the disk.
<4>[ 1.945373] [1: kworker/u8:0: 6] [c1] GPT:15253503 != 15269887
<6>[ 1.945404] [3: swapper/0: 1] [c3] [SENSOR] bma2x2_probe: start
<4>[ 1.945404] [1: kworker/u8:0: 6] [c1] GPT:Alternate GPT header not at the end of the disk.
<4>[ 1.945434] [1: kworker/u8:0: 6] [c1] GPT:15253503 != 15269887
<6>[ 1.945434] [3: swapper/0: 1] [c3] [SENSOR] bma2x2_parse_dt: place[6] acc_int[238]
<4>[ 1.945465] [1: kworker/u8:0: 6] [c1] GPT: Use GNU Parted to correct GPT errors.
<6>[ 1.945617] [1: kworker/u8:0: 6] [c1] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27
<6>[ 1.949737] [1: kworker/u8:0: 6] [c1] mmcblk0boot1: unknown partition table
<6>[ 1.950531] [1: kworker/u8:0: 6] [c1] mmcblk0boot0: unknown partition table
<6>[ 1.950805] [1: kworker/u8:0: 6] [c1] event:0x80, best_data:0x0
<6>[ 1.950836] [1: kworker/u8:0: 6] [c1] sc271x_regulator_event()->Line:420, --REGULATOR_EVENT_DISABLE--> vddsdio event 128
<4>[ 1.950866] [1: kworker/u8:0: 6] [c1] sdhost sdio_sd signal voltage disable success!
<4>[ 1.950866] [1: kworker/u8:0: 6] [c1] mmc_regulator_set_ocr regulator_disable
<4>[ 1.951324] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.951751] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<5>[ 1.954498] [3: swapper/0: 1] [c3] accelerometer_sensor 2-0018: Bosch Sensortec Device detected,HW IC name: BMA255/254
<6>[ 1.955261] [3: swapper/0: 1] [c3] [SENSOR] bma2x2_set_bandwidth: [12]
<4>[ 1.955383] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.955810] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<6>[ 1.956024] [3: swapper/0: 1] [c3] [SENSOR] bma2x2_set_int1_pad_sel: int1sel(2)
<4>[ 1.956207] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.956634] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.957061] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.957458] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<6>[ 1.957794] [3: swapper/0: 1] [c3] input: accelerometer_sensor as /devices/virtual/input/input5
<4>[ 1.957885] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<6>[ 1.958007] [3: swapper/0: 1] [c3] [SENSOR] bma2x2_probe: success
<4>[ 1.958312] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.958343] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,saudio-dst-id is 2
<4>[ 1.958343] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,ctrl_channel is 10
<4>[ 1.958374] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,playback_channel is 11
<4>[ 1.958374] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,capture_channel is 12
<4>[ 1.958404] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,monitor_channel is 13
<4>[ 1.958435] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,saudio-names is VIRTUAL AUDIO W
<4>[ 1.958587] [3: swapper/0: 1] [c3] saudio:workqueue create ok
<4>[ 1.958740] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,saudio-dst-id is 2
<4>[ 1.958770] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,ctrl_channel is 14
<4>[ 1.958770] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,playback_channel is 15
<4>[ 1.958801] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,capture_channel is 16
<4>[ 1.958831] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,monitor_channel is 17
<4>[ 1.958831] [3: swapper/0: 1] [c3] saudio: snd_saudio_probe: sprd,saudio-names is saudiovoip
<4>[ 1.958862] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 1.958984] [0: swapper/0: 1] [c0] saudio:workqueue create ok
<6>[ 1.959289] [2: swapper/0: 1] [c2] usbcore: registered new interface driver snd-usb-audio
<6>[ 1.959350] [3: saudio-2-10: 113] [c3] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 10
<3>[ 1.959350] [3: saudio-2-10: 113] [c3] sblock-2-13 not ready!
<4>[ 1.959381] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<3>[ 1.959411] [3: saudio-2-10: 113] [c3] Error: sblock_receive dst 2, channel 13 result is -5
<4>[ 1.959411] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi there is no signal voltage!
<4>[ 1.959442] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi there is no signal voltage!
<4>[ 1.959472] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi There is no signalling voltage
<7>[ 1.959625] [2: swapper/0: 1] [c2] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
<6>[ 1.959899] [1: saudio-2-14: 118] [c1] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 14
<3>[ 1.959899] [1: saudio-2-14: 118] [c1] sblock-2-17 not ready!
<3>[ 1.959930] [1: saudio-2-14: 118] [c1] Error: sblock_receive dst 2, channel 17 result is -5
<7>[ 1.960113] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.1: no of_node; not parsing pinctrl DT
<6>[ 1.960144] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 1
<6>[ 1.960235] [2: swapper/0: 1] [c2] SRG_VREG: normal standby
<6>[ 1.960327] [2: swapper/0: 1] [c2] [ASoC:POWER] Register VREG Success!
<7>[ 1.960357] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.2: no of_node; not parsing pinctrl DT
<6>[ 1.960388] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 2
<6>[ 1.960479] [2: swapper/0: 1] [c2] SRG_VB: normal standby
<6>[ 1.960540] [2: swapper/0: 1] [c2] SRG_VB: supplied by SRG_VREG
<6>[ 1.960632] [2: swapper/0: 1] [c2] [ASoC:POWER] Register VB Success!
<7>[ 1.960693] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.3: no of_node; not parsing pinctrl DT
<6>[ 1.960723] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 3
<6>[ 1.960815] [2: swapper/0: 1] [c2] SRG_BG: normal standby
<6>[ 1.960845] [2: swapper/0: 1] [c2] SRG_BG: supplied by SRG_VB
<6>[ 1.960937] [2: swapper/0: 1] [c2] [ASoC:POWER] Register BG Success!
<7>[ 1.960968] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.4: no of_node; not parsing pinctrl DT
<6>[ 1.960998] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 4
<6>[ 1.960998] [2: swapper/0: 1] [c2] [ASoC:POWER] min_uV:150000, max_uV:300000
<6>[ 1.961120] [2: swapper/0: 1] [c2] SRG_BG_IBIAS: 150 <--> 300 mV at 150 mV normal standby
<6>[ 1.961181] [2: swapper/0: 1] [c2] SRG_BG_IBIAS: supplied by SRG_BG
<6>[ 1.961242] [2: swapper/0: 1] [c2] [ASoC:POWER] Register BG_IBIAS Success!
<7>[ 1.961273] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.5: no of_node; not parsing pinctrl DT
<6>[ 1.961303] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 5
<6>[ 1.961334] [2: swapper/0: 1] [c2] [ASoC:POWER] min_uV:2800000, max_uV:3600000
<6>[ 1.961425] [2: swapper/0: 1] [c2] SRG_VCOM: 2800 <--> 3600 mV at 2800 mV normal standby
<6>[ 1.961456] [2: swapper/0: 1] [c2] SRG_VCOM: supplied by SRG_BG_IBIAS
<6>[ 1.961547] [2: swapper/0: 1] [c2] [ASoC:POWER] Register VCOM Success!
<7>[ 1.961578] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.6: no of_node; not parsing pinctrl DT
<6>[ 1.961608] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 6
<6>[ 1.961700] [2: swapper/0: 1] [c2] SRG_VCOM_BUF: normal standby
<6>[ 1.961761] [2: swapper/0: 1] [c2] SRG_VCOM_BUF: supplied by SRG_VCOM
<6>[ 1.961822] [2: swapper/0: 1] [c2] [ASoC:POWER] Register VCOM_BUF Success!
<7>[ 1.961853] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.7: no of_node; not parsing pinctrl DT
<6>[ 1.961883] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 7
<6>[ 1.961975] [2: swapper/0: 1] [c2] SRG_VBO: normal standby
<6>[ 1.962036] [2: sblock-2-13: 114] [c2] sblock-2-13 is ready!
<6>[ 1.962036] [1: sblock-2-17: 119] [c1] sblock-2-17 is ready!
<6>[ 1.962097] [2: swapper/0: 1] [c2] SRG_VBO: supplied by SRG_VB
<6>[ 1.962188] [2: swapper/0: 1] [c2] [ASoC:POWER] Register VBO Success!
<7>[ 1.962219] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.8: no of_node; not parsing pinctrl DT
<6>[ 1.962249] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 8
<6>[ 1.962280] [2: swapper/0: 1] [c2] [ASoC:POWER] min_uV:2200000, max_uV:3000000
<6>[ 1.962371] [2: swapper/0: 1] [c2] SRG_VMICBIAS: 2200 <--> 3000 mV at 2200 mV normal standby
<6>[ 1.962432] [2: swapper/0: 1] [c2] SRG_VMICBIAS: supplied by SRG_VCOM
<6>[ 1.962493] [2: swapper/0: 1] [c2] [ASoC:POWER] Register VMICBIAS Success!
<7>[ 1.962524] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.9: no of_node; not parsing pinctrl DT
<6>[ 1.962554] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 9
<6>[ 1.962677] [2: swapper/0: 1] [c2] SRG_MICBIAS: normal standby
<6>[ 1.962707] [2: swapper/0: 1] [c2] SRG_MICBIAS: supplied by SRG_VMICBIAS
<6>[ 1.962799] [2: swapper/0: 1] [c2] [ASoC:POWER] Register MICBIAS Success!
<7>[ 1.962829] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.10: no of_node; not parsing pinctrl DT
<6>[ 1.962860] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 10
<6>[ 1.962921] [2: swapper/0: 1] [c2] SRG_AUXMICBIAS: normal standby
<6>[ 1.962982] [2: sblock-2-10: 115] [c2] sblock-2-10 is ready!
<6>[ 1.963043] [2: swapper/0: 1] [c2] SRG_AUXMICBIAS: supplied by SRG_VMICBIAS
<6>[ 1.963134] [2: swapper/0: 1] [c2] [ASoC:POWER] Register AUXMICBIAS Success!
<7>[ 1.963165] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.11: no of_node; not parsing pinctrl DT
<6>[ 1.963195] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 11
<6>[ 1.963195] [2: swapper/0: 1] [c2] [ASoC:POWER] min_uV:400000, max_uV:1000000
<6>[ 1.963317] [2: swapper/0: 1] [c2] SRG_HEADMICBIAS: 400 <--> 1000 mV at 1000 mV normal standby
<6>[ 1.963348] [3: sblock-2-14: 121] [c3] sblock-2-14 is ready!
<6>[ 1.963378] [2: swapper/0: 1] [c2] SRG_HEADMICBIAS: supplied by SRG_VMICBIAS
<6>[ 1.963439] [2: swapper/0: 1] [c2] [ASoC:POWER] Register HEADMICBIAS Success!
<7>[ 1.963470] [2: swapper/0: 1] [c2] sprd-audio-power sprd-audio-power.12: no of_node; not parsing pinctrl DT
<6>[ 1.963500] [2: swapper/0: 1] [c2] [ASoC:POWER] Probe 12
<6>[ 1.963531] [2: swapper/0: 1] [c2] [ASoC:POWER] min_uV:1600000, max_uV:3400000
<6>[ 1.963623] [2: swapper/0: 1] [c2] SRG_CGLDO: 1600 <--> 3400 mV at 1600 mV normal standby
<6>[ 1.963684] [0: sblock-2-11: 117] [c0] sblock-2-11 is ready!
<6>[ 1.963714] [2: swapper/0: 1] [c2] SRG_CGLDO: supplied by SRG_VREG
<6>[ 1.963775] [2: swapper/0: 1] [c2] [ASoC:POWER] Register CGLDO Success!
<6>[ 1.964019] [0: sblock-2-15: 122] [c0] sblock-2-15 is ready!
<6>[ 1.964141] [2: swapper/0: 1] [c2] u32 classifier
<6>[ 1.964141] [2: swapper/0: 1] [c2] Actions configured
<6>[ 1.964172] [2: swapper/0: 1] [c2] Netfilter messages via NETLINK v0.30.
<6>[ 1.964263] [2: swapper/0: 1] [c2] nf_conntrack version 0.5.0 (15364 buckets, 61456 max)
<6>[ 1.964355] [1: sblock-2-12: 120] [c1] sblock-2-12 is ready!
<6>[ 1.964721] [0: sblock-2-16: 123] [c0] sblock-2-16 is ready!
<6>[ 1.964843] [2: swapper/0: 1] [c2] ctnetlink v0.93: registering with nfnetlink.
<6>[ 1.964965] [2: swapper/0: 1] [c2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 1.964996] [2: swapper/0: 1] [c2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 1.965423] [2: swapper/0: 1] [c2] xt_time: kernel timezone is -0000
<6>[ 1.965576] [2: swapper/0: 1] [c2] gre: GRE over IPv4 demultiplexor driver
<6>[ 1.965789] [2: swapper/0: 1] [c2] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.966064] [2: swapper/0: 1] [c2] arp_tables: (C) 2002 David S. Miller
<6>[ 1.966156] [2: swapper/0: 1] [c2] TCP: cubic registered
<6>[ 1.966156] [2: swapper/0: 1] [c2] Initializing XFRM netlink socket
<6>[ 1.966552] [2: swapper/0: 1] [c2] NET: Registered protocol family 10
<6>[ 1.967590] [2: swapper/0: 1] [c2] mip6: Mobile IPv6
<6>[ 1.967651] [2: swapper/0: 1] [c2] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.967864] [2: swapper/0: 1] [c2] sit: IPv6 over IPv4 tunneling driver
<6>[ 1.968841] [2: swapper/0: 1] [c2] NET: Registered protocol family 17
<6>[ 1.968872] [2: swapper/0: 1] [c2] NET: Registered protocol family 15
<6>[ 1.968933] [2: swapper/0: 1] [c2] l2tp_core: L2TP core driver, V2.0
<6>[ 1.968963] [2: swapper/0: 1] [c2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
<6>[ 1.969818] [2: swapper/0: 1] [c2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
<4>[ 1.970703] [2: swapper/0: 1] [c2] dt version i2s->dai_name i2s_bt_sco0
<4>[ 1.970733] [2: swapper/0: 1] [c2] i2s config_type pcm
<4>[ 1.970764] [2: swapper/0: 1] [c2] i2s->i2s_dai_driver[0].name i2s_bt_sco0
<4>[ 1.970794] [2: swapper/0: 1] [c2] i2s->i2s_dai_driver[1].name i2s_bt_sco_dummy
<4>[ 1.970977] [2: swapper/0: 1] [c2] dt version i2s->dai_name i2s_bt_sco1
<4>[ 1.971008] [2: swapper/0: 1] [c2] warning:Must give me the config_type! default is pcm
<4>[ 1.971008] [2: swapper/0: 1] [c2] i2s config_type (null)
<4>[ 1.971038] [2: swapper/0: 1] [c2] i2s->i2s_dai_driver[0].name i2s_bt_sco1
<4>[ 1.971069] [2: swapper/0: 1] [c2] i2s->i2s_dai_driver[1].name i2s_bt_sco_dummy
<5>[ 1.971557] [2: swapper/0: 1] [c2] Registering SWP/SWPB emulation handler
<6>[ 1.971832] [2: swapper/0: 1] [c2] *** register_pm_notifier, nb->notifier_call:wakeup_reason_pm_event ***
<6>[ 1.971862] [2: swapper/0: 1] [c2] zswap: loading zswap
<6>[ 1.971893] [2: swapper/0: 1] [c2] zpool: creating pool type zsmalloc
<6>[ 1.972045] [2: swapper/0: 1] [c2] zpool: created zsmalloc pool
<6>[ 1.972076] [2: swapper/0: 1] [c2] zswap: using zsmalloc pool
<6>[ 1.972106] [2: swapper/0: 1] [c2] zswap: using lzo compressor
<6>[ 1.972442] [2: swapper/0: 1] [c2] sm5504:sm5504_probe() line-1541: SiliconMitus SM5504 driver 2.1.0SPRD probing...
<4>[ 1.975189] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi there is no signal voltage!
<6>[ 1.975494] [2: swapper/0: 1] [c2] sm5504:sm5504_probe() line-1596: Request IRQ 394(GPIO 233)...
<6>[ 1.975677] [2: swapper/0: 1] [c2] muic_init_dock_cb switch_dev_register ret=0
<6>[ 1.978240] [2: swapper/0: 1] [c2] SM5504 : SiliconMitus SM5504 MUIC driver 2.1.0SPRD initialize successfully
<6>[ 1.979339] [2: kworker/2:1: 92] [c2] sm5504:sm5504_init_work() line-1340: INT1 = 0x20
<6>[ 1.980438] [2: kworker/2:1: 92] [c2] sm5504:sm5504_init_work() line-1342: INT2 = 0x0
<6>[ 1.982269] [2: kworker/2:1: 92] [c2] sm5504:sm5504_init_work() line-1348: sm5504_irq_work(chip)
<7>[ 1.985626] [1: swapper/0: 1] [c1] usb: init
<7>[ 1.985778] [1: swapper/0: 1] [c1] usb: android_bind disconnect
<4>[ 1.985809] [1: swapper/0: 1] [c1] usb: pullup, d->enable = 0, d->vbus=0
<6>[ 1.985992] [2: kworker/2:1: 92] [c2] sm5504_irq_work : INTF1 = 0x20, INTF2 = 0x0
<6>[ 1.985992] [1: swapper/0: 1] [c1] file system registered
<6>[ 1.986022] [2: kworker/2:1: 92] [c2] sm5504_irq_work : DEV1 = 0x4, DEV2 = 0x0
<6>[ 1.986053] [2: kworker/2:1: 92] [c2] sm5504_irq_work : ADC = 0x1f
<6>[ 1.986053] [2: kworker/2:1: 92] [c2] sm5504:sm5504_get_cable_type_by_device_reg() line-475: Device = 0x4, 0x0
<6>[ 1.986083] [2: kworker/2:1: 92] [c2] sm5504:sm5504_irq_work() line-1248: Status : cable type = 2,
<6>[ 1.986083] [2: kworker/2:1: 92] vbus = 1, accessory = 1
<6>[ 1.986083] [2: kworker/2:1: 92] ocp = 0, ovp = 0, otp = 0,
<6>[ 1.986083] [2: kworker/2:1: 92] adc_chg = 0, cable_chg = 1
<6>[ 1.986083] [2: kworker/2:1: 92] otg = 0, dcdt = 0, usb = 1,
<6>[ 1.986083] [2: kworker/2:1: 92] uart = 0, jig = 0
<6>[ 1.986083] [2: kworker/2:1: 92] 200k usb cable = 0
<6>[ 1.986175] [2: kworker/2:1: 92] [c2] sm5504:sm5504_irq_work() line-1262: SM5504 set the vbus noti to usb
<6>[ 1.986206] [2: kworker/2:1: 92] [c2] usb_notifier: sec_cable_log MUIC_VBUS_NOTI vbus:1
<6>[ 1.986236] [2: kworker/2:1: 92] [c2] usb_notify: send_otg_notify event=vbus_power(15) enable=1
<6>[ 1.986236] [2: kworker/2:1: 92] [c2] usb_notify: extra_notifier_callback event=vbus_power(15)
<6>[ 1.986267] [2: kworker/2:1: 92] [c2] usb_notify: extra_notify_state+ event=vbus_power(15), enable=on
<6>[ 1.986297] [2: kworker/2:1: 92] [c2] usb_notify: extra_notify_state- event=vbus_power(15), cable=none
<6>[ 1.986297] [2: kworker/2:1: 92] [c2] sm5504:sm5504_cable_change_handler() line-743: Cable change to MUIC_SM5504_CABLE_TYPE_USB
<6>[ 1.986328] [2: kworker/2:1: 92] [c2] sec_charger_cb: cable type (0x02)
<6>[ 1.986358] [2: kworker/2:1: 92] [c2] sec_charger_cb: otg_enable_flag (0)
<3>[ 1.986358] [2: kworker/2:1: 92] [c2] sec_charger_cb: fail to get battery psy
<7>[ 1.986389] [1: swapper/0: 1] [c1] [mtp_setup] line = [1764]
<6>[ 1.986419] [2: kworker/2:1: 92] [c2] sm5504:sm5504_usb_attach_handler() line-834: USB attached
<6>[ 1.986419] [2: kworker/2:1: 92] [c2] usb_notifier: sec_cable_log MUIC_USB_ATTACH_NOTI vbus:1
<6>[ 1.986450] [2: kworker/2:1: 92] [c2] usb_notify: send_otg_notify event=vbus(1) enable=1
<6>[ 1.986450] [2: kworker/2:1: 92] [c2] usb_notify: send_otg_notify reserve event
<7>[ 1.986755] [3: swapper/0: 1] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=1
<6>[ 1.986938] [3: swapper/0: 1] [c3] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.986968] [3: swapper/0: 1] [c3] android_usb gadget: Number of LUNs=2
<6>[ 1.986999] [3: swapper/0: 1] [c3] lun0: LUN: removable file: (no medium)
<6>[ 1.986999] [3: swapper/0: 1] [c3] lun1: LUN: removable file: (no medium)
<7>[ 1.987274] [3: swapper/0: 1] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=2
<7>[ 1.987304] [3: swapper/0: 1] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=3
<7>[ 1.987335] [3: swapper/0: 1] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=4
<6>[ 1.987335] [3: swapper/0: 1] [c3] android_usb gadget: android_usb ready
<6>[ 1.987365] [3: swapper/0: 1] [c3] dwc_usb_gadget_start
<6>[ 1.987396] [3: swapper/0: 1] [c3] [SPRD_GPIO_KEYS_DBG] func: gpio_keys_init line: 0946
<6>[ 1.987609] [3: swapper/0: 1] [c3] [SPRD_GPIO_KEYS_INFO] Not Find the node
<6>[ 1.987915] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 0 adc_max = 490 code = 226 type = 0
<6>[ 1.987915] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 491 adc_max = 685 code = 582 type = 0
<6>[ 1.987945] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 686 adc_max = 1180 code = 115 type = 0
<6>[ 1.987976] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] device tree data: adc_min = 1181 adc_max = 3000 code = 114 type = 0
<6>[ 1.988037] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] ANA_HDT1 0x00e8
<6>[ 1.988067] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] ddie_chip_id=0x88600022
<6>[ 1.988098] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][-1] adie_chip_id=0x2723A000
<6>[ 1.988098] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] adie chip is 2723, type = 2723
<6>[ 1.988250] [3: swapper/0: 1] [c3] [ASoC:POWER] HEADMICBIAS Set Voltage 850000--850000
<6>[ 1.988342] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] ====================== SPRD HEADSET DETECT v2 ======================
<6>[ 1.988372] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] write 0~3 to "/sys/kernel/headset/debug_level" for headset debug
<6>[ 1.988403] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] ====================================================================
<6>[ 1.988403] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] use GPIO_312 for insert detecting
<6>[ 1.988433] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] automatic type switch is unsupported
<6>[ 1.988677] [3: swapper/0: 1] [c3] input: headset-keyboard as /devices/virtual/input/input6
<6>[ 1.989166] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] ADPGAR_BYP_SELECT is enabled!
<6>[ 1.989379] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] headset_debug_sysfs_init success
<6>[ 1.989379] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] to get calibration data from efuse ...
<6>[ 1.989501] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] test[0] 0x79 121, test[1] 0x80 128, test[2] 0x78 120
<6>[ 1.989562] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] block_7 0x00000058
<6>[ 1.989562] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] block 0 bit 7 set 0 have efuse data
<6>[ 1.989593] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] test[0] 121, test[1] 128, test[2] 120
<6>[ 1.989624] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] adc_cal_headset.A 300, adc_cal_headset.B 3276, adc_cal_headset.E 2740
<6>[ 1.989746] [3: swapper/0: 1] [c3] [SPRD_HEADSET_INFO][2723] headset_detect_probe success
<6>[ 1.989959] [3: swapper/0: 1] [c3] sprd_rtc 40038080.rtc: setting system clock to 2018-01-05 03:12:35 UTC (1515121955)
<6>[ 1.990081] [3: swapper/0: 1] [c3] sec_bat_parse_dt: Vendor is Empty
<6>[ 1.990447] [3: swapper/0: 1] [c3] sec_bat_parse_dt : chg_temp_check is Empty
<6>[ 1.990478] [3: swapper/0: 1] [c3] sec_bat_parse_dt : inbat_voltage is Empty
<6>[ 1.990997] [3: swapper/0: 1] [c3] sec_bat_parse_dt : Temp highlimit threshold event is Empty
<6>[ 1.991027] [3: swapper/0: 1] [c3] sec_bat_parse_dt : Temp highlimit recovery event is Empty
<6>[ 1.991058] [3: swapper/0: 1] [c3] sec_bat_parse_dt : Temp highlimit threshold normal is Empty
<6>[ 1.991088] [3: swapper/0: 1] [c3] sec_bat_parse_dt : Temp highlimit recovery normal is Empty
<6>[ 1.991119] [3: swapper/0: 1] [c3] sec_bat_parse_dt : Temp highlimit threshold lpm is Empty
<6>[ 1.991149] [3: swapper/0: 1] [c3] sec_bat_parse_dt : Temp highlimit recovery lpm is Empty
<6>[ 1.991210] [3: swapper/0: 1] [c3] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_EVENT(-150), HIGHLIMIT_RECOVERY_EVENT(-150)
<6>[ 1.991210] [3: swapper/0: 1] HIGH_THRESHOLD_EVENT(550), HIGH_RECOVERY_EVENT(500) LOW_THRESHOLD_EVENT(-50), LOW_RECOVERY_EVENT(0)
<6>[ 1.991210] [3: swapper/0: 1] HIGHLIMIT_THRESHOLD_NOLMAL(0), HIGHLIMIT_RECOVERY_NORMAL(0)
<6>[ 1.991210] [3: swapper/0: 1] HIGH_THRESHOLD_NORMAL(550), HIGH_RECOVERY_NORMAL(500) LOW_THRESHOLD_NORMAL(-50), LOW_RECOVERY_NORMAL(0)
<6>[ 1.991210] [3: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(0), HIGHLIMIT_RECOVERY_LPM(0)
<6>[ 1.991210] [3: swapper/0: 1] HIGH_THRESHOLD_LPM(550), HIGH_RECOVERY_LPM(500) LOW_THRESHOLD_LPM(-50), LOW_RECOVERY_LPM(0)
<6>[ 1.991363] [3: swapper/0: 1] [c3] sec_bat_parse_dt: swelling low temp chg current is Empty
<6>[ 1.991424] [3: swapper/0: 1] [c3] sec_bat_parse_dt : SWELLING_HIGH_TEMP(450) SWELLING_HIGH_TEMP_RECOVERY(400)
<6>[ 1.991424] [3: swapper/0: 1] SWELLING_LOW_TEMP(100) SWELLING_LOW_TEMP_RECOVERY(150)
<6>[ 1.991424] [3: swapper/0: 1] SWELLING_CHG_CURRENT(0) SWELLING_HIGH_CHG_CURRENT(680) SWELLING_LOW_CHG_CURRENT(680)
<6>[ 1.991424] [3: swapper/0: 1] SWELLING_FULL_CHECK_CURRENT(100)
<6>[ 1.992797] [3: swapper/0: 1] [c3] sec-battery sec-battery.4: sec_bat_set_property: current_cable(4), wc_status(0), wire_status(4)
<6>[ 1.992828] [3: swapper/0: 1] [c3] sec-battery sec-battery.4: sec_battery_probe: SEC Battery Driver Monitorwork
<6>[ 1.992858] [0: kworker/u8:2: 127] [c0] sec-battery sec-battery.4: sec_bat_cable_work: Start
<6>[ 1.992858] [0: kworker/u8:2: 127] [c0] sec_chg_set_property: float voltage(4388)
<6>[ 1.992919] [3: swapper/0: 1] [c3] sec-battery sec-battery.4: sec_battery_probe: SEC Battery Driver Loaded
<4>[ 1.995697] I[0: kworker/u8:2: 127] [c0] sdhost sdio_wifi int 0x18000
<6>[ 1.996002] [0: kworker/u8:2: 127] [c0] SM5701_set_batreg_voltage : SM5701_CHGCNTL3 (Battery regulation voltage) : 0x1e
<6>[ 1.996032] [0: kworker/u8:2: 127] [c0] sec_chg_set_property : STATUS OF CHARGER ON(0)/OFF(1): 0
<6>[ 1.996063] [0: kworker/u8:2: 127] [c0] sec_chg_set_property : float voltage (4388mV)
<4>[ 1.996246] I[0: kworker/u8:2: 127] [c0] sdhost sdio_wifi int 0x18000
<6>[ 1.997650] [3: swapper/0: 1] [c3] stty: after parse device tree, name=sttybt, dst=3, channel=4, bufid=10
<4>[ 1.997772] [3: swapper/0: 1] [c3] stty_probe init device addr: 0xeed2e000
<6>[ 1.998535] [3: swapper/0: 1] [c3] [ASoC:CDCV4] ana_chip_id is 0xc04af11c
<6>[ 1.999114] [0: kworker/u8:2: 127] [c0] SM5701_set_batreg_voltage : SM5701_CHGCNTL3 (Battery regulation voltage) : 0x1e
<6>[ 1.999145] [0: kworker/u8:2: 127] [c0] sec_chg_set_property : vbus current limit (460mA)
<6>[ 1.999877] [3: swapper/0: 1] [c3] i2s-null-codec sound.44: null-codec-dai <-> i2s_bt_sco0 mapping ok
<4>[ 2.000091] I[0: kworker/u8:2: 127] [c0] sdhost sdio_wifi int 0x18000
<6>[ 2.000335] [3: swapper/0: 1] [c3] i2s-null-codec sound.44: null-codec-dai <-> i2s_bt_sco1 mapping ok
<4>[ 2.000640] I[0: kworker/u8:2: 127] [c0] sdhost sdio_wifi int 0x18000
<6>[ 2.001190] [0: kworker/u8:2: 127] [c0] SM5701_set_vbuslimit_current : SM5701_soft start (Input current limit) : 0x11
<4>[ 2.001190] I[0: kworker/u8:2: 127] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.001800] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.002441] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.003051] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.003631] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.004241] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.004852] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.005584] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.005645] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi there is no signal voltage!
<4>[ 2.005706] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi there is no signal voltage!
<4>[ 2.005706] [1: kworker/u8:0: 6] [c1] sdhost sdio_wifi There is no signalling voltage
<6>[ 2.005737] [3: swapper/0: 1] [c3] vbc-r2p0-sprd-codec sound.42: sprd-codec-i2s <-> vbc-r2p0 mapping ok
<6>[ 2.006042] [3: swapper/0: 1] [c3] vbc-r2p0-sprd-codec sound.42: sprd-codec-vaudio <-> vaudio mapping ok
<6>[ 2.006378] [3: swapper/0: 1] [c3] vbc-r2p0-sprd-codec sound.42: codec-i2s-ext <-> vbc-r2p0-ad23 mapping ok
<6>[ 2.006713] [3: swapper/0: 1] [c3] vbc-r2p0-sprd-codec sound.42: codec-vaudio-ext <-> vaudio-ad23 mapping ok
<6>[ 2.006927] [3: swapper/0: 1] [c3] vbc-r2p0-sprd-codec sound.42: sprd-codec-fm <-> vbc-dfm mapping ok
<6>[ 2.008666] [3: swapper/0: 1] [c3] ALSA device list:
<6>[ 2.008697] [3: swapper/0: 1] [c3] #0: all-i2s
<6>[ 2.008728] [3: swapper/0: 1] [c3] #1: sprdphone
<3>[ 2.008880] [3: swapper/0: 1] [c3] Warning: unable to open an initial console.
<6>[ 2.008941] [3: swapper/0: 1] [c3] [secgpio_dvs][check_gpio_status] state : init
<6>[ 2.008972] [3: swapper/0: 1] [c3]
<6>[ 2.009002] [3: swapper/0: 1] <6>[ 2.009552] [3: swapper/0: 1] Freeing unused kernel memory: 444K (c09ad000 - c0a1c000)
<4>[ 2.011291] [0: init: 1] [c0] !@Boot: start init process
<4>[ 2.012115] [0: init: 1] [c0]
<4>[ 2.012115] [0: init: 1] SIM_SLOT_PIN gpio 231 : Dual Sim mode
<7>[ 2.019470] [0: init: 1] [c0] SELinux: 2048 avtab hash slots, 19037 rules.
<4>[ 2.025207] [2: kworker/u8:0: 6] [c2] sdhost sdio_wifi there is no signal voltage!
<7>[ 2.030242] [0: init: 1] [c0] SELinux: 2048 avtab hash slots, 19037 rules.
<7>[ 2.030334] [0: init: 1] [c0] SELinux: 1 users, 2 roles, 1552 types, 0 bools, 1 sens, 1024 cats
<7>[ 2.030364] [0: init: 1] [c0] SELinux: 86 classes, 19037 rules
<7>[ 2.035919] [0: init: 1] [c0] SELinux: Completing initialization.
<7>[ 2.035949] [0: init: 1] [c0] SELinux: Setting up existing superblocks.
<7>[ 2.035980] [0: init: 1] [c0] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 2.036041] [0: init: 1] [c0] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 2.036102] [0: init: 1] [c0] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 2.036132] [0: init: 1] [c0] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 2.036193] [0: init: 1] [c0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.036224] [0: init: 1] [c0] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 2.040252] [0: init: 1] [c0] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 2.040283] [0: init: 1] [c0] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 2.040313] [0: init: 1] [c0] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
<7>[ 2.040344] [0: init: 1] [c0] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 2.040405] [0: init: 1] [c0] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 2.040466] [0: init: 1] [c0] SELinux: initialized (dev configfs, type configfs), not configured for labeling
<7>[ 2.040496] [0: init: 1] [c0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 2.040557] [0: init: 1] [c0] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<4>[ 2.045959] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.046752] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.050933] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.051727] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.052520] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.053283] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.054077] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.054870] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.055633] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.056427] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.057220] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.058013] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.058044] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage!
<4>[ 2.058074] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage!
<4>[ 2.058105] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi There is no signalling voltage
<4>[ 2.075134] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage!
<4>[ 2.096618] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.098144] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.103363] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.104888] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.106445] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.107940] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.109466] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.110992] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.112518] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.114044] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.115570] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.117095] I[0: swapper/0: 0] [c0] sdhost sdio_wifi int 0x18000
<4>[ 2.117156] [0: kworker/u8:0: 6] [c0] sdhost sdio_wifi there is no signal voltage!
<4>[ 2.211608] [0: init: 1] [c0] SELinux: Loaded policy from /sepolicy
<6>[ 2.347045] [1: kworker/u8:2: 127] [c1] SM5701_set_vbuslimit_current : SM5701_VBUSCNTL (Input current limit) : 0x11
<6>[ 2.347076] [1: kworker/u8:2: 127] [c1] sec_chg_set_property : topoff current (175mA)
<6>[ 2.350006] [1: kworker/u8:2: 127] [c1] SM5701_set_topoff : SM5701_CHGCNTL1 (Autostop, Top-off current threshold) : 0x13
<6>[ 2.350006] [1: kworker/u8:2: 127] [c1] sec_chg_set_property : fast charging current (975mA), siop_level=100
<6>[ 2.351867] [1: kworker/u8:2: 127] [c1] SM5701_set_fastchg_current : SM5701_CHGCNTL2 (fastchg current) : 0x23
<6>[ 2.351898] [1: kworker/u8:2: 127] [c1] sec_chg_set_property : STATUS OF CHARGER ON(0)/OFF(1): 0
<6>[ 2.353759] [1: kworker/u8:2: 127] [c1] SM5701_toggle_charger: SM5701 Charger toggled!!
<6>[ 2.354827] [1: kworker/u8:2: 127] [c1] SM5701_toggle_charger : CNTL register (0x09) : 0x64
<6>[ 2.354858] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[ 2.354888] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[ 2.354919] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-13,val->intval = 3969
<6>[ 2.354949] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-14,val->intval = 3969
<6>[ 2.354980] [1: kworker/u8:2: 127] [c1] sprdfgu: rint:500,value.intval:0
<6>[ 2.355041] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-14,val->intval = 3766
<6>[ 2.355072] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-19,val->intval = 406
<6>[ 2.355102] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-20,val->intval = 406
<6>[ 2.355224] [1: kworker/u8:2: 127] [c1] read channel [1429]
<6>[ 2.355346] [1: kworker/u8:2: 127] [c1] read channel [1429]
<6>[ 2.355438] [1: kworker/u8:2: 127] [c1] read channel [1429]
<6>[ 2.355529] [1: kworker/u8:2: 127] [c1] read channel [1424]
<6>[ 2.355651] [1: kworker/u8:2: 127] [c1] read channel [1423]
<6>[ 2.355682] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(314), Temp-ADC(1427)
<6>[ 2.355773] [1: kworker/u8:2: 127] [c1] read channel [1428]
<6>[ 2.355895] [1: kworker/u8:2: 127] [c1] read channel [1424]
<6>[ 2.355987] [1: kworker/u8:2: 127] [c1] read channel [1427]
<6>[ 2.356079] [1: kworker/u8:2: 127] [c1] read channel [1426]
<6>[ 2.356201] [1: kworker/u8:2: 127] [c1] read channel [1425]
<6>[ 2.356201] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1426)
<6>[ 2.356262] [1: kworker/u8:2: 127] [c1] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:19836144
<6>[ 2.356292] [1: kworker/u8:2: 127] [c1] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2040
<6>[ 2.356292] [1: kworker/u8:2: 127] [c1] sprdfgu: sprdfgu_read_soc soc 50,sprdfgu_data.init_cap 50
<6>[ 2.356323] [1: kworker/u8:2: 127] [c1] sprdfgu: rint:280,value.intval:314
<6>[ 2.357421] [1: kworker/u8:2: 127] [c1] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 2.359558] [1: kworker/u8:2: 127] [c1] sprdfgu: cnom_temp 2040, delta_soc 0,comp_soc50,soc 50,temp 31
<6>[ 2.359588] [1: kworker/u8:2: 127] [c1] fgu_capacity: = 50,flush_time: = 1,period_time:=2
<6>[ 2.359619] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-45,val->intval = 500
<6>[ 2.359649] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_get_battery_info:Vnow(3969mV),Inow(406mA),Imax(460mA),SOC(50%),Tbat(314),Tchg(0),is_hc_usb(0)
<6>[ 2.360717] [1: kworker/u8:2: 127] [c1] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 2.360748] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_battery_cable_check: Battery Connected
<6>[ 2.360778] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<3>[ 2.728210] [0: init: 1] [c0] init: could not import file '/init.rilcommon.rc' from '/init.rc'
<3>[ 2.728271] [0: init: 1] [c0] init: could not import file '/init.fac.rc' from '/init.rc'
<3>[ 2.955230] [0: saudio-2-10: 113] [c0] saudio_wait_monitor_cmd error -5
<3>[ 2.955261] [1: saudio-2-14: 118] [c1] saudio_wait_monitor_cmd error -5
<6>[ 2.955291] [1: saudio-2-14: 118] [c1] saudio_ctrl_thread,saudio: modem boot and handshake ok,dst 2, channel 14
<6>[ 2.955322] [0: saudio-2-10: 113] [c0] saudio_ctrl_thread,saudio: modem boot and handshake ok,dst 2, channel 10
<6>[ 2.955322] [0: saudio-2-10: 113] [c0] saudio:saudio_snd_card free in dst 2,channel 10
<6>[ 2.955352] [1: saudio-2-14: 118] [c1] saudio:saudio_snd_card free in dst 2,channel 14
<6>[ 2.955383] [0: saudio-2-10: 113] [c0] saudio:saudio_snd_card free out 0 ,dst 2, channel 10
<6>[ 2.955383] [3: kworker/u8:2: 127] [c3] saudio: card free handler in
<6>[ 2.955413] [0: saudio-2-10: 113] [c0] saudio_ctrl_thread flush work queue in dst 2, channel 10
<6>[ 2.955413] [3: kworker/u8:2: 127] [c3] saudio: card free handler out
<6>[ 2.955444] [0: saudio-2-10: 113] [c0] saudio_ctrl_thread flush work queue out,dst 2, channel 10
<6>[ 2.955474] [1: saudio-2-14: 118] [c1] saudio:saudio_snd_card free out 0 ,dst 2, channel 14
<6>[ 2.955474] [1: saudio-2-14: 118] [c1] saudio_ctrl_thread flush work queue in dst 2, channel 14
<6>[ 2.955505] [3: kworker/u8:2: 127] [c3] saudio: card free handler in
<6>[ 2.955505] [3: kworker/u8:2: 127] [c3] saudio: card free handler out
<6>[ 2.955535] [0: saudio-2-10: 113] [c0] saudio.c:saudio_snd_notify_mdem_clear in
<6>[ 2.955688] [1: saudio-2-14: 118] [c1] saudio_ctrl_thread flush work queue out,dst 2, channel 14
<6>[ 2.955688] [1: saudio-2-14: 118] [c1] saudio.c:saudio_snd_notify_mdem_clear in
<6>[ 2.958557] [3: saudio-2-14: 118] [c3] saudio.c:saudio_snd_notify_mdem_clear out
<6>[ 2.958679] [0: saudio-2-10: 113] [c0] saudio.c:saudio_snd_notify_mdem_clear out
<6>[ 2.959197] [3: saudio-2-14: 118] [c3] saudio.c:snd_card create ok
<6>[ 2.959228] [3: saudio-2-14: 118] [c3] saudio: snd card init reulst 0, dst 2, channel 14
<6>[ 2.959228] [3: saudio-2-14: 118] [c3] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 14
<6>[ 2.959686] [0: saudio-2-10: 113] [c0] saudio.c:snd_card create ok
<6>[ 2.959716] [0: saudio-2-10: 113] [c0] saudio: snd card init reulst 0, dst 2, channel 10
<6>[ 2.959716] [0: saudio-2-10: 113] [c0] saudio_ctrl_thread,saudio: waiting for modem boot handshake,dst 2,channel 10
<6>[ 3.360992] I[1: swapper/1: 0] [c1] alarm set by [kworker/u8:2], triggered at 2018-1-5 3:12:36
<6>[ 3.361114] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-13,val->intval = 3960
<6>[ 3.361145] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-14,val->intval = 3960
<6>[ 3.361175] [1: kworker/u8:2: 127] [c1] sprdfgu: rint:280,value.intval:314
<6>[ 3.361236] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-14,val->intval = 3860
<6>[ 3.361236] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-19,val->intval = 359
<6>[ 3.361267] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-20,val->intval = 359
<6>[ 3.361389] [1: kworker/u8:2: 127] [c1] read channel [1423]
<6>[ 3.361511] [1: kworker/u8:2: 127] [c1] read channel [1426]
<6>[ 3.361602] [1: kworker/u8:2: 127] [c1] read channel [1427]
<6>[ 3.361694] [1: kworker/u8:2: 127] [c1] read channel [1428]
<6>[ 3.361816] [1: kworker/u8:2: 127] [c1] read channel [1428]
<6>[ 3.361846] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(314), Temp-ADC(1427)
<6>[ 3.361938] [1: kworker/u8:2: 127] [c1] read channel [1426]
<6>[ 3.362060] [1: kworker/u8:2: 127] [c1] read channel [1427]
<6>[ 3.362152] [1: kworker/u8:2: 127] [c1] read channel [1428]
<6>[ 3.362274] [1: kworker/u8:2: 127] [c1] read channel [1429]
<6>[ 3.362365] [1: kworker/u8:2: 127] [c1] read channel [1426]
<6>[ 3.362396] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(314), Temp-ADC(1427)
<6>[ 3.362457] [1: kworker/u8:2: 127] [c1] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:19836144
<6>[ 3.362457] [1: kworker/u8:2: 127] [c1] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2040
<6>[ 3.362487] [1: kworker/u8:2: 127] [c1] sprdfgu: sprdfgu_read_soc soc 50,sprdfgu_data.init_cap 50
<6>[ 3.362518] [1: kworker/u8:2: 127] [c1] sprdfgu: rint:280,value.intval:314
<6>[ 3.363647] [1: kworker/u8:2: 127] [c1] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 3.365844] [1: kworker/u8:2: 127] [c1] sprdfgu: cnom_temp 2040, delta_soc 0,comp_soc50,soc 50,temp 31
<6>[ 3.365905] [1: kworker/u8:2: 127] [c1] fgu_capacity: = 50,flush_time: = 2,period_time:=1
<6>[ 3.365936] [1: kworker/u8:2: 127] [c1] sec_hal_fg_get_property-45,val->intval = 500
<6>[ 3.365966] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_get_battery_info:Vnow(3960mV),Inow(359mA),Imax(460mA),SOC(50%),Tbat(314),Tchg(0),is_hc_usb(0)
<6>[ 3.367065] [1: kworker/u8:2: 127] [c1] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 3.367095] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_battery_cable_check: Battery Connected
<6>[ 3.367126] [1: kworker/u8:2: 127] [c1] sec-battery sec-battery.4: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<3>[ 3.493194] [2: ueventd: 137] [c2] power_supply sec-fuelgauge: driver failed to report `status' property: -22
<6>[ 3.510070] [2: ueventd: 137] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 3.517517] [2: ueventd: 137] [c2] SM5701_get_charging_health : Health, SM5701_STATUS1 : 0x24, SM5701_STATUS2 : 0x08
<6>[ 3.518585] [2: ueventd: 137] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 3.520721] [2: ueventd: 137] [c2] sm5701_get_float_voltage: battery cv voltage 0x1e
<3>[ 3.520751] [2: ueventd: 137] [c2] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22
<3>[ 3.540100] [0: init: 1] [c0] init: /dev/hw_random not found
<3>[ 3.540283] [0: init: 1] [c0] init: maybe fpga fail fd=-1
<7>[ 3.541717] [0: init: 1] [c0] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 3.542449] [0: init: 1] [c0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.547393] [0: init: 1] [c0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.549346] [0: init: 1] [c0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.550140] [0: init: 1] [c0] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.553253] [0: init: 1] [c0] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<3>[ 3.560028] [0: init: 1] [c0] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<3>[ 3.560333] [0: init: 1] [c0] init: /dev/hw_random not found
<6>[ 3.568023] [1: init: 138] [c1] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: errors=panic
<7>[ 3.568054] [1: init: 138] [c1] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[ 3.568328] [1: init: 138] [c1] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/SYSTEM,target=/system,type=ext4)=0
<4>[ 3.569396] [1: init: 138] [c1] CryptfsFSCK: Decryption operation succeededfs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/userdata
<6>[ 3.632629] [1: init: 138] [c1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 3.632720] [1: init: 138] [c1] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 3.632751] [1: init: 138] [c1] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 3.632751] [1: init: 138] [c1] e2fsck: /dev/block/platform/sdio_emmc/by-name/userdata: clean, 1633/154432 files, 107271/1234940 blocks
<6>[ 3.632781] [1: init: 138] [c1] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 3.637512] [1: init: 138] [c1] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic
<7>[ 3.637573] [1: init: 138] [c1] SELinux: initialized (dev mmcblk0p27, type ext4), uses xattr
<6>[ 3.637695] [1: init: 138] [c1] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/userdata,target=/data,type=ext4)=0
<6>[ 3.638092] [1: init: 138] [c1] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/CACHE
<6>[ 3.652343] [1: init: 138] [c1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 3.652435] [1: init: 138] [c1] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 3.652465] [1: init: 138] [c1] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 3.652465] [1: init: 138] [c1] e2fsck: /dev/block/platform/sdio_emmc/by-name/CACHE: clean, 26/12800 files, 1983/51200 blocks
<6>[ 3.652496] [1: init: 138] [c1] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 3.656982] [1: init: 138] [c1] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic
<7>[ 3.657043] [1: init: 138] [c1] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
<6>[ 3.657165] [1: init: 138] [c1] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/CACHE,target=/cache,type=ext4)=0
<6>[ 3.657318] [1: init: 138] [c1] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/efs
<6>[ 3.670104] [1: init: 138] [c1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 3.670166] [1: init: 138] [c1] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 3.670196] [1: init: 138] [c1] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 3.670227] [1: init: 138] [c1] e2fsck: /dev/block/platform/sdio_emmc/by-name/efs: clean, 53/1280 files, 1151/5120 blocks
<6>[ 3.670257] [1: init: 138] [c1] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 3.676147] [1: init: 138] [c1] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic
<7>[ 3.676208] [1: init: 138] [c1] SELinux: initialized (dev mmcblk0p17, type ext4), uses xattr
<6>[ 3.676330] [1: init: 138] [c1] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/efs,target=/efs,type=ext4)=0
<6>[ 3.676483] [1: init: 138] [c1] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdio_emmc/by-name/prodnv
<6>[ 3.689025] [1: init: 138] [c1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 3.689117] [1: init: 138] [c1] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 3.689117] [1: init: 138] [c1] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 3.689147] [1: init: 138] [c1] e2fsck: /dev/block/platform/sdio_emmc/by-name/prodnv: clean, 15/320 files, 1060/1280 blocks
<6>[ 3.689178] [1: init: 138] [c1] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 3.694519] [1: init: 138] [c1] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic
<7>[ 3.694549] [1: init: 138] [c1] SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr
<6>[ 3.694671] [1: init: 138] [c1] fs_mgr: __mount(source=/dev/block/platform/sdio_emmc/by-name/prodnv,target=/productinfo,type=ext4)=0
<3>[ 3.697601] [0: init: 1] [c0] init: Running /dev/block/platform/sdio_emmc/by-name/persdata on ext4
<4>[ 3.705047] [2: e2fsck: 155] [c2] e2fsck 1.42.9 (28-Dec-2013)
<4>[ 3.708221] [2: e2fsck: 155] [c2] skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<4>[ 3.708282] [2: e2fsck: 155] [c2] check whether gdt & bitmap free count is vaild
<4>[ 3.708496] [2: e2fsck: 155] [c2] /dev/block/platform/sdio_emmc/by-name/persdata: clean, 18/288 files, 1056/2304 blocks
<4>[ 3.709014] [2: e2fsck: 155] [c2] ext2fs_close2 : normal operation, return 0
<6>[ 3.713104] [1: init: 1] [c1] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
<7>[ 3.713165] [1: init: 1] [c1] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<7>[ 3.720703] [1: init: 1] [c1] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
<4>[ 3.756469] [1: init: 1] [c1] Mali<2>: Inserting Mali v600 device driver.
<4>[ 3.756500] [1: init: 1] [c1] Mali<2>: Driver revision:
<4>[ 3.756530] [1: init: 1] [c1] Mali<2>: mali_module_init() registering driver
<4>[ 3.756835] [1: init: 1] [c1] Mali<2>: mali_probe(): Called for platform device 60000000.gpu
<4>[ 3.760131] [1: init: 1] [c1] Mali<2>: Mali memory settings (shared: 0x40000000)
<4>[ 3.760162] [1: init: 1] [c1] Mali<2>: Using device defined frame buffer settings (0x00000000@0x00000000)
<4>[ 3.760192] [1: init: 1] [c1] Mali<2>: Mali PMU: Creating Mali PMU core
<4>[ 3.760223] [1: init: 1] [c1] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00001000)
<4>[ 3.760253] [1: init: 1] [c1] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
<4>[ 3.760284] [1: init: 1] [c1] Mali<2>: Mali PP: Base address of PP core: 0x60008000
<4>[ 3.760406] [0: init: 1] [c0] Mali<2>: Found Mali GPU Mali-400 MP r1p1
<4>[ 3.760833] [0: init: 1] [c0] Mali<2>: Mali L2 cache: Created Mali_L2: 32K, 4-way, 64byte cache line, 64bit external bus
<4>[ 3.760864] [0: init: 1] [c0] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
<4>[ 3.760925] I[0: init: 1] [c0] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
<4>[ 3.760925] I[0: init: 1] [c0] Mali<2>: Probe: Page fault detect: PASSED
<4>[ 3.760955] I[0: init: 1] [c0] Mali<2>: Probe: Bus read error detect: PASSED
<4>[ 3.760986] [0: init: 1] [c0] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
<4>[ 3.761047] [0: init: 1] [c0] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
<4>[ 3.761077] I[0: init: 1] [c0] Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
<4>[ 3.761077] I[0: init: 1] [c0] Mali<2>: Probe: Page fault detect: PASSED
<4>[ 3.761108] I[0: init: 1] [c0] Mali<2>: Probe: Bus read error detect: PASSED
<4>[ 3.761138] [0: init: 1] [c0] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
<4>[ 3.761138] [0: init: 1] [c0] Mali<2>: Mali PP: Base address of PP core: 0x60008000
<4>[ 3.761199] [0: init: 1] [c0] Mali<2>: 1+0 PP cores initialized
<4>[ 3.761230] [0: init: 1] [c0] Mali<2>: Mali GPU Timer: 100
<4>[ 3.761230] [0: init: 1] [c0] Mali<2>: Mali GPU Utilization: Utilization handler installed
<4>[ 3.761749] [0: init: 1] [c0] Mali<2>: mali_probe(): Successfully initialized driver for platform device 60000000.gpu
<4>[ 3.762023] [0: init: 1] [c0] Mali: Mali device driver loaded
<4>[ 3.815155] [1: init: 1] [c1] SELinux: Could not stat /data/system/container: No such file or directory.
<7>[ 3.866210] [1: init: 1] [c1] [mtpg_open] line = [539]
<7>[ 3.866241] [1: init: 1] [c1] [mtpg_release_device] line = [1228]
<7>[ 3.866302] [1: init: 1] [c1] [mtpg_open] line = [539]
<7>[ 3.866333] [1: init: 1] [c1] [mtpg_release_device] line = [1228]
<3>[ 3.885559] [1: init: 1] [c1] init: do_restorecon: Could not access /carrier
<6>[ 3.925201] [1: init: 1] [c1] cproc proc open type: cp_crash!
<6>[ 3.925323] [1: init: 1] [c1] cproc proc open type: wdtirq!
<6>[ 3.925384] [1: init: 1] [c1] cproc proc open type: stop!
<6>[ 3.925476] [1: init: 1] [c1] cproc proc open type: start!
<6>[ 3.925567] [1: init: 1] [c1] cproc proc open type: modem!
<6>[ 3.925628] [1: init: 1] [c1] cproc proc open type: dsp!
<6>[ 3.925720] [1: init: 1] [c1] cproc proc open type: cp_crash!
<6>[ 3.925811] [1: init: 1] [c1] cproc proc open type: wdtirq!
<6>[ 3.925903] [1: init: 1] [c1] cproc proc open type: stop!
<6>[ 3.925994] [1: init: 1] [c1] cproc proc open type: start!
<6>[ 3.926055] [1: init: 1] [c1] cproc proc open type: modem!
<6>[ 3.926147] [1: init: 1] [c1] cproc proc open type: dsp!
<6>[ 3.926239] [1: init: 1] [c1] cproc proc open type: cp_crash!
<6>[ 3.926300] [1: init: 1] [c1] cproc proc open type: wdtirq!
<6>[ 3.926391] [1: init: 1] [c1] cproc proc open type: stop!
<6>[ 3.926483] [1: init: 1] [c1] cproc proc open type: start!
<6>[ 3.926544] [1: init: 1] [c1] cproc proc open type: modem!
<6>[ 3.926727] [1: init: 1] [c1] cproc proc open type: cp_crash!
<6>[ 3.926818] [1: init: 1] [c1] cproc proc open type: wdtirq!
<6>[ 3.926879] [1: init: 1] [c1] cproc proc open type: stop!
<6>[ 3.926971] [1: init: 1] [c1] cproc proc open type: start!
<6>[ 3.927062] [1: init: 1] [c1] cproc proc open type: modem!
<6>[ 3.927185] [1: init: 1] [c1] cproc proc open type: wdtirq!
<6>[ 3.927276] [1: init: 1] [c1] cproc proc open type: stop!
<6>[ 3.927368] [1: init: 1] [c1] cproc proc open type: start!
<6>[ 3.927429] [1: init: 1] [c1] cproc proc open type: modem!
<6>[ 3.927581] [1: init: 1] [c1] cproc proc open type: wdtirq!
<6>[ 3.927673] [1: init: 1] [c1] cproc proc open type: stop!
<6>[ 3.927764] [1: init: 1] [c1] cproc proc open type: start!
<6>[ 3.927825] [1: init: 1] [c1] cproc proc open type: modem!
<3>[ 4.125366] [1: init: 1] [c1] init: cannot find '/system/bin/sysmon', disabling 'sysmon'
<6>[ 4.132537] [0: healthd: 161] [c0] healthd: Healthd mode is android
<6>[ 4.133605] [0: healthd: 161] [c0] binder: 161:161 transaction failed 29189, size 0-0
<3>[ 4.139099] [1: init: 1] [c1] init: Warning! Service swapon needs a SELinux domain defined; please fix!
<6>[ 4.151000] [0: sswap: 170] [c0] Adding 524284k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:524284k SSFS
<4>[ 4.161346] [3: download: 171] [c3] DOWNLOAD IOCTL: 0x7a01.
<4>[ 4.161895] [3: download: 171] [c3] sprd_download_poweron on
<4>[ 4.162139] [3: download: 171] [c3] DOWNLOAD IOCTL: 0x7a03.
<3>[ 4.162353] [2: init: 1] [c2] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<3>[ 4.162506] [2: init: 1] [c2] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<3>[ 4.169799] [2: init: 1] [c2] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<3>[ 4.173675] [2: init: 1] [c2] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
<3>[ 4.183074] [2: init: 1] [c2] init: cannot find '/system/bin/ext_chown.sh', disabling 'chown_service'
<3>[ 4.189453] [3: init: 1] [c3] init: cannot find '/system/xbin/srtd', disabling 'srtd'
<3>[ 4.210906] [0: init: 1] [c0] init: cannot find '/system/xbin/zram.sh', disabling 'zram'
<4>[ 4.215820] [0: download: 171] [c0] DOWNLOAD IOCTL: 0x7a03.
<6>[ 4.224090] [0: modem_control: 196] [c0] cproc proc open type: wdtirq!
<6>[ 4.224761] [0: modem_control: 196] [c0] cproc proc poll type: wdtirq
<6>[ 4.308502] [2: wcnd: 187] [c2] warning: `wcnd' uses 32-bit capabilities (legacy support in use)
<6>[ 4.311126] [0: init: 1] [c0] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
<7>[ 4.311187] [0: init: 1] [c0] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
<6>[ 4.322631] [0: init: 1] [c0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 4.322662] [0: init: 1] [c0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 4.322692] [0: init: 1] [c0] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 4.322723] [0: init: 1] [c0] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[ 4.322784] [0: init: 1] [c0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 4.322784] [0: init: 1] [c0] lowmemorykiller: oom_adj 11 => oom_score_adj 647
<6>[ 4.322814] [0: init: 1] [c0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<7>[ 4.334960] [0: init: 1] [c0] usb: enable_store enabled=0, !dev->enabled=1
<3>[ 4.334991] [0: init: 1] [c0] android_usb: already disabled
<3>[ 4.335693] [0: init: 1] [c0] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<4>[ 4.335906] [0: init: 1] [c0] init(1) functions_store(mtp,adb)
<7>[ 4.335937] [0: init: 1] [c0] usb: android_enable_function name=mtp
<7>[ 4.335937] [0: init: 1] [c0] usb: android_enable_function name=acm
<7>[ 4.335968] [0: init: 1] [c0] usb: android_enable_function name=ffs
<3>[ 4.336090] [0: init: 1] [c0] init: using deprecated syntax for specifying property 'persist.sys.usb.sport', use ${name} instead
<3>[ 4.336120] [0: init: 1] [c0] init: property 'persist.sys.usb.sport' doesn't exist while expanding '$persist.sys.usb.sport'
<3>[ 4.336151] [0: init: 1] [c0] init: cannot expand '$persist.sys.usb.sport' while writing to '/sys/class/android_usb/android0/f_acm/instances'
<7>[ 4.336334] [0: init: 1] [c0] usb: enable_store enabled=1, !dev->enabled=1
<7>[ 4.336364] [0: init: 1] [c0] usb: enable_store f:mtp
<7>[ 4.336395] [0: init: 1] [c0] usb: enable_store f:acm
<7>[ 4.336395] [0: init: 1] [c0] usb: acm is enabled. (bcdDevice=0x400)
<7>[ 4.336425] [0: init: 1] [c0] usb: enable_store f:ffs
<7>[ 4.336456] [0: init: 1] [c0] usb: enable_store next cmd : usb_add_config
<3>[ 4.337646] [0: init: 1] [c0] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 4.350311] [1: sdcard: 192] [c1] sdcardfs: version 2.1.4
<6>[ 4.350341] [1: sdcard: 192] [c1] sdcardfs: dev_name -> /data/media
<6>[ 4.350372] [1: sdcard: 192] [c1] sdcardfs: options -> uid=1023,gid=1023,wgid=1015,derive=legacy,reserved_mb=20
<6>[ 4.350860] [1: sdcard: 192] [c1] sdcardfs: created packagelist pkgld/221
<6>[ 4.351348] [1: sdcard: 192] [c1] sdcardfs: mounted on top of /data/media type ext4
<7>[ 4.351440] [1: sdcard: 192] [c1] SELinux: initialized (dev sdcardfs, type sdcardfs), uses xattr
<6>[ 4.352844] [1: pkgld: 221] [c1] sdcardfs: read_package_list
<6>[ 4.354583] [3: adbd: 222] [c3] read descriptors
<6>[ 4.354614] [3: adbd: 222] [c3] read strings
<7>[ 4.354675] [3: adbd: 222] [c3] usb: usb_string_ids_n --cdev(0xee61c200)->next_string_id=4
<4>[ 4.354705] [3: adbd: 222] [c3] adbd(222) usb_add_config
<7>[ 4.354736] [3: adbd: 222] [c3] usb: android_bind_enabled_functions f:mtp
<7>[ 4.354736] [3: adbd: 222] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=6
<7>[ 4.354766] [3: adbd: 222] [c3] [mtpg_function_bind] line = [1378]
<4>[ 4.354858] [3: adbd: 222] [c3] dual speed mtp: IN/ep1in, OUT/ep1out
<7>[ 4.354858] [3: adbd: 222] [c3] usb: android_bind_enabled_functions f:acm
<7>[ 4.354888] [3: adbd: 222] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=7
<7>[ 4.354919] [3: adbd: 222] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=8
<7>[ 4.354919] [3: adbd: 222] [c3] usb: usb_string_id cdev(0xee61c200)->next_string_id=9
<7>[ 4.354949] [3: adbd: 222] [c3] usb: android_bind_enabled_functions f:ffs
<6>[ 4.367340] I[1: rild: 212] [c1] alarm set by [kworker/u8:2], triggered at 2018-1-5 3:12:37
<6>[ 4.367370] [2: kworker/u8:2: 127] [c2] sec_hal_fg_get_property-13,val->intval = 3963
<6>[ 4.367401] [2: kworker/u8:2: 127] [c2] sec_hal_fg_get_property-14,val->intval = 3963
<6>[ 4.367462] [2: kworker/u8:2: 127] [c2] sprdfgu: rint:280,value.intval:314
<6>[ 4.367523] [2: kworker/u8:2: 127] [c2] sec_hal_fg_get_property-14,val->intval = 3859
<6>[ 4.367553] [2: kworker/u8:2: 127] [c2] sec_hal_fg_get_property-19,val->intval = 372
<6>[ 4.367584] [2: kworker/u8:2: 127] [c2] sec_hal_fg_get_property-20,val->intval = 372
<6>[ 4.367736] [2: kworker/u8:2: 127] [c2] read channel [1427]
<6>[ 4.367828] [2: kworker/u8:2: 127] [c2] read channel [1427]
<6>[ 4.367950] [2: kworker/u8:2: 127] [c2] read channel [1428]
<6>[ 4.368072] [2: kworker/u8:2: 127] [c2] read channel [1422]
<6>[ 4.368194] [2: kworker/u8:2: 127] [c2] read channel [1426]
<6>[ 4.368225] [2: kworker/u8:2: 127] [c2] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1426)
<6>[ 4.368347] [2: kworker/u8:2: 127] [c2] read channel [1425]
<6>[ 4.368469] [2: kworker/u8:2: 127] [c2] read channel [1427]
<6>[ 4.368591] [2: kworker/u8:2: 127] [c2] read channel [1425]
<6>[ 4.368713] [2: kworker/u8:2: 127] [c2] read channel [1425]
<6>[ 4.368804] [2: kworker/u8:2: 127] [c2] read channel [1423]
<6>[ 4.368835] [2: kworker/u8:2: 127] [c2] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1425)
<6>[ 4.368927] [2: kworker/u8:2: 127] [c2] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:19836144
<6>[ 4.368927] [2: kworker/u8:2: 127] [c2] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2040
<6>[ 4.368957] [2: kworker/u8:2: 127] [c2] sprdfgu: sprdfgu_read_soc soc 50,sprdfgu_data.init_cap 50
<6>[ 4.368988] [2: kworker/u8:2: 127] [c2] sprdfgu: rint:280,value.intval:315
<6>[ 4.370269] [2: kworker/u8:2: 127] [c2] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 4.372802] [2: kworker/u8:2: 127] [c2] sprdfgu: cnom_temp 2040, delta_soc 0,comp_soc50,soc 50,temp 31
<6>[ 4.372863] [2: kworker/u8:2: 127] [c2] fgu_capacity: = 50,flush_time: = 3,period_time:=1
<6>[ 4.372924] [2: kworker/u8:2: 127] [c2] sec_hal_fg_get_property-45,val->intval = 500
<6>[ 4.372955] [2: kworker/u8:2: 127] [c2] sec-battery sec-battery.4: sec_bat_get_battery_info:Vnow(3963mV),Inow(372mA),Imax(460mA),SOC(50%),Tbat(315),Tchg(0),is_hc_usb(0)
<6>[ 4.374237] [2: kworker/u8:2: 127] [c2] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 4.374267] [2: kworker/u8:2: 127] [c2] sec-battery sec-battery.4: sec_bat_battery_cable_check: Battery Connected
<6>[ 4.374298] [2: kworker/u8:2: 127] [c2] sec-battery sec-battery.4: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<4>[ 4.689147] [3: adbd: 222] [c3] usb: pullup, d->enable = 1, d->vbus=0
<4>[ 4.800933] [2: refnotify: 193] [c2] RTC open is calling!
<4>[ 4.801147] [2: refnotify: 193] [c2] RTC open is calling!
<4>[ 4.812957] [1: surfaceflinger: 166] [c1] gsp_get_chip_id[517] return chip id 0x88600022
<4>[ 4.812988] [1: surfaceflinger: 166] [c1] gsp_get_chip_id[517] return chip id 0x88600022
<4>[ 4.813018] [1: surfaceflinger: 166] [c1] GSP : get chip id :88600022 is validate, scan bugchip list.
<4>[ 4.813049] [1: surfaceflinger: 166] [c1] GSP : mismatch bug chip id.
<4>[ 4.813049] [1: surfaceflinger: 166] [c1] dolphin tshark GSP : gsp address type :2
<4>[ 4.813079] [1: surfaceflinger: 166] [c1] GSP [564]: gsp address type :2 ,
<4>[ 4.821777] [3: surfaceflinger: 166] [c3] Mali<2>: Session 0xEDB6CD00 with pid 166 was granted higher priority.
<3>[ 4.822326] [3: surfaceflinger: 166] [c3] ion_invalidate_for_cpu: dmabuf is error and dmabuf is 00000000!
<4>[ 4.845458] [1: surfaceflinger: 166] [c1] sprdfb: [sprdfb_ioctl] : SPRD_FB_SET_POWER_MODE (2)
<3>[ 5.161132] [1: healthd: 161] [c1] healthd: initial Capacity max: '0'
<4>[ 5.161590] [1: healthd: 161] [c1] healthd: batteryPogoOnlnePath not found
<4>[ 5.161651] [1: healthd: 161] [c1] healthd: batteryFullVoltagePath not found
<4>[ 5.161682] [1: healthd: 161] [c1] healthd: batterySWSelfDischargingPath not found
<6>[ 5.164825] [1: healthd: 161] [c1] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 32.
<6>[ 5.164978] [1: healthd: 161] [c1] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 59.
<3>[ 5.165008] [1: healthd: 161] [c1] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22)
<4>[ 5.165222] [1: healthd: 161] [c1] healthd: battery l=50 v=3963 t=31.5 h=2 st=2 c=0 o=4 ca=372 ct=1 ps=0 hv=0 chg=u
<6>[ 5.165283] [1: healthd: 161] [c1] healthd-android: healthd_mode_android_battery_update
<6>[ 5.165313] [1: healthd: 161] [c1] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 5.165344] [1: healthd: 161] [c1] BatteryPropertiesRegistrar: notifyListeners : done
<3>[ 5.209869] [0: download: 171] [c0] [SDIOTRAN]marlin_sdio_init:entry
<3>[ 5.210113] [0: download: 171] [c0] [SDIOTRAN]marlin_sdio_init:sdio get host ok!!!
<3>[ 5.213500] [0: download: 171] [c0] [SDIOTRAN]marlin_sdio_init:sdio register drv succ!!!
<4>[ 5.214263] [0: kworker/u8:2: 127] [c0] sdhost sdio_wifi there is no signal voltage!
<4>[ 5.214294] [0: kworker/u8:2: 127] [c0] sdhost sdio_wifi There is no signalling voltage
<6>[ 5.214355] [0: download: 171] [c0] sprd_download_open 1
<4>[ 5.214447] [0: download: 171] [c0] SDIO dev not ready, wait 50ms and try again!
<4>[ 5.225219] [0: kworker/u8:2: 127] [c0] sdhost sdio_wifi there is no signal voltage!
<4>[ 5.245727] I[0: mediaserver: 180] [c0] sdhost sdio_wifi int 0x18000
<4>[ 5.246154] I[0: mediaserver: 180] [c0] sdhost sdio_wifi int 0x18000
<4>[ 5.250061] I[0: mediaserver: 180] [c0] sdhost sdio_wifi int 0x18000
<6>[ 5.263244] [0: kworker/u8:2: 127] [c0] mmc2: new high speed SDIO card at address 8800
<7>[ 5.263488] [0: kworker/u8:2: 127] [c0] sprd-sdio-card mmc2:8800: no of_node; not parsing pinctrl DT
<7>[ 5.263763] [0: kworker/u8:2: 127] [c0] marlin_sdio mmc2:8800:1: no of_node; not parsing pinctrl DT
<4>[ 5.265655] [0: download: 171] [c0] SDIO dev not ready, wait 50ms and try again!
<3>[ 5.265747] [0: kworker/u8:2: 127] [c0] [SDIOTRAN]marlin_sdio_probe:sdio drv and dev match!!!
<3>[ 5.265777] [0: kworker/u8:2: 127] [c0] [SDIOTRAN]marlin_sdio_probe:get func ok!!!
<3>[ 5.265777] [0: kworker/u8:2: 127]
<3>[ 5.265991] [0: kworker/u8:2: 127] [c0] [SDIOTRAN]marlin_sdio_probe:enable func1 ok!!!
<3>[ 5.266021] [0: kworker/u8:2: 127] [c0] [SDIOTRAN]wakeup_slave_pin_init:req sdio_data->wake_out = 57 succ!!!
<3>[ 5.266174] [0: kworker/u8:2: 127] [c0] [SDIOTRAN]marlin_wake_intr_init:ok!!!irq is 220!!!
<3>[ 5.266235] [0: kworker/u8:2: 127] [c0] [SDIOTRAN]sdio_dev_intr_init:ok!!!irq is 219!!!
<6>[ 5.325408] [0: download: 171] [c0] sprd_download_sdio_write size: 12
<6>[ 5.335754] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.349914] [0: download: 171] [c0] sprd_download_sdio_write size: 16
<6>[ 5.361724] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.374572] I[2: vold: 165] [c2] alarm set by [kworker/u8:2], triggered at 2018-1-5 3:12:38
<6>[ 5.374572] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-13,val->intval = 3926
<6>[ 5.374603] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-14,val->intval = 3926
<6>[ 5.374633] [0: kworker/u8:0: 6] [c0] sprdfgu: rint:280,value.intval:315
<6>[ 5.374694] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-14,val->intval = 3878
<6>[ 5.374725] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-19,val->intval = 174
<6>[ 5.374755] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-20,val->intval = 174
<6>[ 5.374847] [0: kworker/u8:0: 6] [c0] read channel [1427]
<6>[ 5.374969] [0: kworker/u8:0: 6] [c0] read channel [1423]
<6>[ 5.375061] [0: kworker/u8:0: 6] [c0] read channel [1426]
<6>[ 5.375244] [0: kworker/u8:0: 6] [c0] read channel [1429]
<6>[ 5.375366] [0: kworker/u8:0: 6] [c0] read channel [1427]
<6>[ 5.375427] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1426)
<6>[ 5.375549] [0: kworker/u8:0: 6] [c0] read channel [1425]
<6>[ 5.375671] [0: kworker/u8:0: 6] [c0] read channel [1428]
<6>[ 5.375793] [0: kworker/u8:0: 6] [c0] read channel [1425]
<6>[ 5.375915] [0: kworker/u8:0: 6] [c0] read channel [1424]
<6>[ 5.376068] [0: kworker/u8:0: 6] [c0] read channel [1428]
<6>[ 5.376098] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1426)
<6>[ 5.376159] [0: kworker/u8:0: 6] [c0] sprdfgu: sprdfgu_read_soc delta 0mAh,sprdfgu_data.init_clbcnt:19836144
<6>[ 5.376190] [0: kworker/u8:0: 6] [c0] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2040
<6>[ 5.376220] [0: kworker/u8:0: 6] [c0] sprdfgu: sprdfgu_read_soc soc 50,sprdfgu_data.init_cap 50
<6>[ 5.376251] [0: kworker/u8:0: 6] [c0] sprdfgu: rint:280,value.intval:315
<6>[ 5.377532] [0: kworker/u8:0: 6] [c0] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 5.379821] [0: kworker/u8:0: 6] [c0] sprdfgu: cnom_temp 2040, delta_soc 0,comp_soc50,soc 50,temp 31
<6>[ 5.379882] [0: kworker/u8:0: 6] [c0] fgu_capacity: = 50,flush_time: = 4,period_time:=1
<6>[ 5.379913] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-45,val->intval = 500
<6>[ 5.379943] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_get_battery_info:Vnow(3926mV),Inow(174mA),Imax(460mA),SOC(50%),Tbat(315),Tchg(0),is_hc_usb(0)
<6>[ 5.381103] [0: kworker/u8:0: 6] [c0] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 5.381134] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_battery_cable_check: Battery Connected
<6>[ 5.381164] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_time_management: Charging Time : 4 secs
<6>[ 5.381195] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_temperature: HLT(0) HLR(0) HT(550), HR(500), LT(-50), LR(0)
<6>[ 5.382446] [0: kworker/u8:0: 6] [c0] sm5701_get_float_voltage: battery cv voltage 0x1e
<6>[ 5.382476] [0: kworker/u8:0: 6] [c0] sec_bat_swelling_check: status(1), swell_mode(0:0), cv(0x1e), temp(315)
<6>[ 5.382507] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[ 5.382537] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<6>[ 5.385437] [0: healthd: 161] [c0] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 32.
<6>[ 5.385528] [0: healthd: 161] [c0] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 59.
<3>[ 5.385559] [0: healthd: 161] [c0] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22)
<4>[ 5.385711] [0: healthd: 161] [c0] healthd: battery l=50 v=3926 t=31.5 h=2 st=2 c=0 o=4 ca=174 ct=1 ps=0 hv=0 chg=u
<6>[ 5.385742] [0: healthd: 161] [c0] healthd-android: healthd_mode_android_battery_update
<6>[ 5.385772] [0: healthd: 161] [c0] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 5.385772] [0: healthd: 161] [c0] BatteryPropertiesRegistrar: notifyListeners : done
<6>[ 5.397186] [0: download: 171] [c0] sprd_download_sdio_write size: 131080
<6>[ 5.409698] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.435333] [0: download: 171] [c0] sprd_download_sdio_write size: 131080
<6>[ 5.447875] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.483001] [0: download: 171] [c0] sprd_download_sdio_write size: 131080
<6>[ 5.495452] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.513763] [0: download: 171] [c0] sprd_download_sdio_write size: 131080
<6>[ 5.526123] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.553802] [0: download: 171] [c0] sprd_download_sdio_write size: 131080
<6>[ 5.566101] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.575866] [2: BootAnimation: 376] [c2] !@BootAnimation : Could not open '/sys/bus/w1/devices/w1_bus_master1/w1_master_check_model'
<6>[ 5.579254] [2: BootAnimation: 376] [c2] !@BootAnimation : [Encryption info]crypt_state = unencrypted, crypt_input_window = 0, crypt_type = 0
<6>[ 5.585357] [2: BootAnimation: 376] [c2] !@BootAnimation : createSurface RGB565
<6>[ 5.593292] [0: download: 171] [c0] sprd_download_sdio_write size: 131080
<3>[ 5.600036] [2: surfaceflinger: 166] [c2] ion_invalidate_for_cpu: dmabuf is error and dmabuf is 00000000!
<6>[ 5.605773] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.606689] [2: BootAnimation: 376] [c2] !@BootAnimation : Could not open '/sys/devices/w1_bus_master1/w1_master_verify_mac'
<6>[ 5.606750] [2: BootAnimation: 376] [c2] !@BootAnimation : Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
<6>[ 5.606781] [2: BootAnimation: 376] [c2] !@BootAnimation : BootAnimData_STATUS = 0x3
<6>[ 5.618316] [2: Binder_1: 259] [c2] ion_system_heap_allocate, size: 770048, time: 915 us
<6>[ 5.625671] [0: download: 171] [c0] sprd_download_sdio_write size: 12
<6>[ 5.635711] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<6>[ 5.645599] [3: download: 171] [c3] sprd_download_sdio_write size: 12
<6>[ 5.655609] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read:
<4>[ 5.655731] [3: download: 171] [c3] wait marlin ready start
<6>[ 5.698608] [2: Binder_1: 259] [c2] ion_system_heap_allocate, size: 770048, time: 915 us
<3>[ 5.715911] I[0:samsungpowersou: 307] [c0] [SDIOTRAN]marlinwake_irq_handler:start,g_val=1
<3>[ 5.715972] I[0:samsungpowersou: 307] [c0] [SDIOTRAN]marlinwake_irq_handler:end,g_val=0
<3>[ 5.716003] I[0:samsungpowersou: 307] [c0] [SDIOTRAN]marlinwake_irq_handler:marlin gpio0 err interupt,g_val=0
<4>[ 5.775207] [3: download: 171] [c3] wait marlin ready ok
<6>[ 5.782806] [2: Binder_1: 259] [c2] ion_system_heap_allocate, size: 770048, time: 976 us
<7>[ 6.199890] [2: main: 191] [c2] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>[ 6.208068] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[HPL] to 8
<6>[ 6.208160] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[HPR] to 8
<6>[ 6.208221] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACL] to 7
<6>[ 6.208282] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACR] to 7
<6>[ 6.208343] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPL_1] to 63
<6>[ 6.208374] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPR_1] to 63
<6>[ 6.208435] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPL_2] to 7
<6>[ 6.208465] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[CG_HPR_2] to 7
<6>[ 6.208526] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[SPKL] to 10
<6>[ 6.208587] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[SPKR] to 10
<6>[ 6.208618] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACL] to 5
<6>[ 6.208679] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACR] to 5
<6>[ 6.208709] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[EAR] to 10
<6>[ 6.208770] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACL] to 5
<6>[ 6.208831] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[DACR] to 5
<6>[ 6.208862] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[ADCL] to 12
<6>[ 6.208923] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set PGA[ADCR] to 12
<6>[ 6.210571] [3: mediaserver: 180] [c3] [ASoC:BOARD] Mic Jack Switch Off
<6>[ 6.210998] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set MAIN MIC->ADCL Switch On
<6>[ 6.211700] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set MAIN MIC->ADCR Switch On
<6>[ 6.212158] [3: mediaserver: 180] [c3] [ASoC:BOARD] Mic Jack Switch On
<6>[ 6.213104] [3: mediaserver: 180] [c3] [ASoC:BOARD] Aux Mic Jack Switch Off
<6>[ 6.213714] [3: mediaserver: 180] [c3] [ASoC:BOARD] HP Mic Jack Switch Off
<6>[ 6.214111] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->SPKL Switch On
<6>[ 6.214538] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCR->SPKL Switch On
<6>[ 6.215484] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->SPKL Switch Off
<6>[ 6.215789] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCR->SPKL Switch Off
<6>[ 6.216247] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCR->HPL Switch On
<6>[ 6.216491] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->HPR Switch On
<6>[ 6.216857] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCR->HPL Switch Off
<6>[ 6.217132] [3: mediaserver: 180] [c3] [ASoC:CDCV4] Set ADCL->HPR Switch Off
<6>[ 6.217864] [3: mediaserver: 180] [c3] [ASoC:BOARD] Line Jack Switch Off
<6>[ 6.218658] [3: mediaserver: 180] [c3] [ASoC:BOARD] Dig FM Jack Switch Off
<6>[ 6.219299] [3: mediaserver: 180] [c3] [ASoC:BOARD] Ext Spk Switch Off
<6>[ 6.219818] [3: mediaserver: 180] [c3] [ASoC:BOARD] HeadPhone Jack Switch Off
<6>[ 6.220153] [3: mediaserver: 180] [c3] [ASoC:BOARD] Ext Ear Switch Off
<6>[ 6.224822] [2: mediaserver: 180] [c2] [ASoC: VBC ] VBC EQ loading
<6>[ 6.232177] [2: mediaserver: 180] [c2] [ASoC: VBC ] VBC DAC EQ Switch On
<6>[ 6.232208] [2: mediaserver: 180] [c2] [ASoC: VBC ] VBC DAC EQ Apply 'Headset'
<6>[ 6.239807] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[SPKL] to 10
<6>[ 6.239837] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[DACL] to 7
<6>[ 6.239898] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC0 DG set 0x15
<6>[ 6.239929] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC0 DG Switch On
<6>[ 6.240020] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[SPKR] to 10
<6>[ 6.240051] [1: mediaserver: 180] [c1] [ASoC:CDCV4] Set PGA[DACR] to 7
<6>[ 6.240112] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC1 DG set 0x15
<6>[ 6.240142] [1: mediaserver: 180] [c1] [ASoC: VBC ] VBC DAC1 DG Switch On
<6>[ 6.733215] [3: NPDecoder: 509] [c3] ion_system_heap_allocate, size: 1536000, time: 2350 us
<6>[ 6.733398] [3: NPDecoder: 509] [c3] sprd_iommu_mm_clk_enable
<6>[ 6.739501] [3: NPDecoder: 509] [c3] vsp_open called ed7f94c0
<6>[ 6.739562] [3: NPDecoder: 509] [c3] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.739593] [3: NPDecoder: 509] [c3] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.739624] [3: NPDecoder: 509] [c3] ###: clk_mm_axi = ffffffea
<6>[ 6.739685] [3: NPDecoder: 509] [c3] VSP mmi_clk open
<6>[ 6.739715] [3: NPDecoder: 509] [c3] set freq_level to 0vsp parent clock name clk_76m8
<4>[ 6.739746] [3: NPDecoder: 509] [c3] vsp_freq 76800000 Hz
<6>[ 6.739746] [3: NPDecoder: 509] [c3] vsp_open: ret 0
<6>[ 6.739776] [3: NPDecoder: 509] [c3] @vsp[vsp_nocache_mmap]
<6>[ 6.739807] [3: NPDecoder: 509] [c3] @vsp mmap c,b0040000,a000
<6>[ 6.739837] [3: NPDecoder: 509] [c3] vsp version -enter
<6>[ 6.745727] [0: NPDecoder: 509] [c0] vsp_release: instance_cnt 1
<6>[ 6.745758] [0: NPDecoder: 509] [c0] vsp_release ed7f94c0
<6>[ 6.745788] [0: NPDecoder: 509] [c0] VSP mmi_clk close!
<6>[ 6.746551] [0: NPDecoder: 509] [c0] sprd_iommu_mm_clk_disable
<6>[ 6.752685] [0: NPDecoder: 509] [c0] ion_system_heap_allocate, size: 1536000, time: 31 us
<6>[ 6.752838] [0: NPDecoder: 509] [c0] sprd_iommu_mm_clk_enable
<6>[ 6.758636] [0: NPDecoder: 509] [c0] vsp_open called ed860ec0
<6>[ 6.758666] [0: NPDecoder: 509] [c0] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.758697] [0: NPDecoder: 509] [c0] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.758728] [0: NPDecoder: 509] [c0] ###: clk_mm_axi = ffffffea
<6>[ 6.758758] [0: NPDecoder: 509] [c0] VSP mmi_clk open
<6>[ 6.758789] [0: NPDecoder: 509] [c0] set freq_level to 0vsp parent clock name clk_76m8
<4>[ 6.758819] [0: NPDecoder: 509] [c0] vsp_freq 76800000 Hz
<6>[ 6.758850] [0: NPDecoder: 509] [c0] vsp_open: ret 0
<6>[ 6.758880] [0: NPDecoder: 509] [c0] @vsp[vsp_nocache_mmap]
<6>[ 6.758911] [0: NPDecoder: 509] [c0] @vsp mmap c,b0040000,a000
<6>[ 6.758941] [0: NPDecoder: 509] [c0] vsp version -enter
<6>[ 6.765258] [0: NPDecoder: 509] [c0] vsp_release: instance_cnt 1
<6>[ 6.765289] [0: NPDecoder: 509] [c0] vsp_release ed860ec0
<6>[ 6.765319] [0: NPDecoder: 509] [c0] VSP mmi_clk close!
<6>[ 6.765960] [0: NPDecoder: 509] [c0] sprd_iommu_mm_clk_disable
<6>[ 6.781524] [2: NPDecoder: 509] [c2] ion_system_heap_allocate, size: 2097152, time: 1342 us
<6>[ 6.781707] [2: NPDecoder: 509] [c2] sprd_iommu_mm_clk_enable
<6>[ 6.789642] [2: NPDecoder: 509] [c2] vsp_open called ed8b1dc0
<6>[ 6.789672] [2: NPDecoder: 509] [c2] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.789703] [2: NPDecoder: 509] [c2] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.789733] [2: NPDecoder: 509] [c2] ###: clk_mm_axi = ffffffea
<6>[ 6.789794] [2: NPDecoder: 509] [c2] VSP mmi_clk open
<6>[ 6.789825] [2: NPDecoder: 509] [c2] set freq_level to 0vsp parent clock name clk_76m8
<4>[ 6.789855] [2: NPDecoder: 509] [c2] vsp_freq 76800000 Hz
<6>[ 6.789855] [2: NPDecoder: 509] [c2] vsp_open: ret 0
<6>[ 6.789916] [2: NPDecoder: 509] [c2] @vsp[vsp_nocache_mmap]
<6>[ 6.789947] [2: NPDecoder: 509] [c2] @vsp mmap c,b01a5000,a000
<6>[ 6.789978] [2: NPDecoder: 509] [c2] vsp version -enter
<6>[ 6.791778] [2: NPDecoder: 509] [c2] vsp_release: instance_cnt 1
<6>[ 6.791809] [2: NPDecoder: 509] [c2] vsp_release ed8b1dc0
<6>[ 6.791839] [2: NPDecoder: 509] [c2] VSP mmi_clk close!
<6>[ 6.792266] [2: NPDecoder: 509] [c2] sprd_iommu_mm_clk_disable
<6>[ 6.804962] [3: NPDecoder: 509] [c3] ion_system_heap_allocate, size: 1536000, time: 30 us
<6>[ 6.805175] [3: NPDecoder: 509] [c3] sprd_iommu_mm_clk_enable
<6>[ 6.812072] [3: NPDecoder: 509] [c3] ion_system_heap_allocate, size: 598016, time: 1038 us
<6>[ 6.818481] [3: NPDecoder: 509] [c3] vsp_open called ed8b1980
<6>[ 6.818511] [3: NPDecoder: 509] [c3] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.818542] [3: NPDecoder: 509] [c3] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.818572] [3: NPDecoder: 509] [c3] ###: clk_mm_axi = ffffffea
<6>[ 6.818603] [3: NPDecoder: 509] [c3] VSP mmi_clk open
<4>[ 6.818634] [3: NPDecoder: 509] [c3] vsp parent clock name clk_192m
<4>[ 6.818664] [3: NPDecoder: 509] [c3] vsp_freq 192000000 Hz
<6>[ 6.818695] [3: NPDecoder: 509] [c3] vsp_open: ret 0
<6>[ 6.818756] [3: NPDecoder: 509] [c3] @vsp[vsp_nocache_mmap]
<6>[ 6.818786] [3: NPDecoder: 509] [c3] @vsp mmap c,b0041000,a000
<6>[ 6.818847] [3: NPDecoder: 509] [c3] vsp version -enter
<6>[ 6.820007] [3: NPDecoder: 509] [c3] vsp_release: instance_cnt 1
<6>[ 6.820037] [3: NPDecoder: 509] [c3] vsp_release ed8b1980
<6>[ 6.820068] [3: NPDecoder: 509] [c3] VSP mmi_clk close!
<6>[ 6.820831] [3: NPDecoder: 509] [c3] sprd_iommu_mm_clk_disable
<6>[ 6.840301] [0: kworker/0:0: 4] [c0] sprd_download_sdio_read read: 
<6>[ 6.845428] [1: download: 171] [c1] sprd_download_release
<6>[ 6.877532] [2: NPDecoder: 509] [c2] vsp_open called ed8d1540
<6>[ 6.877563] [2: NPDecoder: 509] [c2] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.877593] [2: NPDecoder: 509] [c2] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.877624] [2: NPDecoder: 509] [c2] ###: clk_mm_axi = ffffffea
<6>[ 6.877655] [2: NPDecoder: 509] [c2] VSP mmi_clk open
<4>[ 6.878387] [2: NPDecoder: 509] [c2] vsp parent clock name clk_192m
<4>[ 6.878417] [2: NPDecoder: 509] [c2] vsp_freq 192000000 Hz
<6>[ 6.878448] [2: NPDecoder: 509] [c2] vsp_open: ret 0
<6>[ 6.878509] [2: NPDecoder: 509] [c2] @vsp[vsp_nocache_mmap]
<6>[ 6.878509] [2: NPDecoder: 509] [c2] @vsp mmap c,b01b5000,a000
<6>[ 6.878540] [2: NPDecoder: 509] [c2] vsp version -enter
<6>[ 6.879913] [0: NPDecoder: 509] [c0] vsp_release: instance_cnt 1
<6>[ 6.879943] [0: NPDecoder: 509] [c0] vsp_release ed8d1540
<6>[ 6.880310] [0: NPDecoder: 509] [c0] VSP mmi_clk close!
<6>[ 6.890747] [0: NPDecoder: 509] [c0] vsp_open called ed4c1180
<6>[ 6.890777] [0: NPDecoder: 509] [c0] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.890808] [0: NPDecoder: 509] [c0] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.890838] [0: NPDecoder: 509] [c0] ###: clk_mm_axi = ffffffea
<6>[ 6.890899] [0: NPDecoder: 509] [c0] VSP mmi_clk open
<4>[ 6.891632] [0: NPDecoder: 509] [c0] vsp parent clock name clk_192m
<4>[ 6.891662] [0: NPDecoder: 509] [c0] vsp_freq 192000000 Hz
<6>[ 6.891693] [0: NPDecoder: 509] [c0] vsp_open: ret 0
<6>[ 6.891754] [0: NPDecoder: 509] [c0] @vsp[vsp_nocache_mmap]
<6>[ 6.891784] [0: NPDecoder: 509] [c0] @vsp mmap c,b01b5000,a000
<6>[ 6.891815] [0: NPDecoder: 509] [c0] vsp version -enter
<6>[ 6.893981] [0: NPDecoder: 509] [c0] vsp_release: instance_cnt 1
<6>[ 6.894042] [0: NPDecoder: 509] [c0] vsp_release ed4c1180
<6>[ 6.894470] [0: NPDecoder: 509] [c0] VSP mmi_clk close!
<6>[ 6.911743] [1: NPDecoder: 509] [c1] vsp_open called ed06df80
<6>[ 6.911773] [1: NPDecoder: 509] [c1] vsp_set_mm_clk: vsp_instance_cnt 0
<3>[ 6.911804] [1: NPDecoder: 509] [c1] ###: Failed : Can't get clock [clk_mm_axi}!
<3>[ 6.911804] [1: NPDecoder: 509] [c1] ###: clk_mm_axi = ffffffea
<6>[ 6.911895] [1: NPDecoder: 509] [c1] VSP mmi_clk open
<4>[ 6.912597] [1: NPDecoder: 509] [c1] vsp parent clock name clk_192m
<4>[ 6.912628] [1: NPDecoder: 509] [c1] vsp_freq 192000000 Hz
<6>[ 6.912628] [1: NPDecoder: 509] [c1] vsp_open: ret 0
<6>[ 6.912689] [1: NPDecoder: 509] [c1] @vsp[vsp_nocache_mmap]
<6>[ 6.912719] [1: NPDecoder: 509] [c1] @vsp mmap c,b01aa000,a000
<6>[ 6.912750] [1: NPDecoder: 509] [c1] vsp version -enter
<6>[ 6.914093] [1: NPDecoder: 509] [c1] vsp_release: instance_cnt 1
<6>[ 6.914123] [1: NPDecoder: 509] [c1] vsp_release ed06df80
<6>[ 6.914520] [1: NPDecoder: 509] [c1] VSP mmi_clk close!
<6>[ 6.953399] [3: download: 173] [c3] mdbg_proc->write_buf:startwcn
<6>[ 6.954223] [1: wcnd: 218] [c1] mdbg_proc->write_buf:at+loopcheck
<6>[ 6.954254] [1: wcnd: 218] [c1] mdbg start wake marlin
<3>[ 6.954284] [1: wcnd: 218] [c1] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 6.954284] [1: wcnd: 218]
<3>[ 6.956817] I[0: iptables: 610] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 6.956817] I[0: iptables: 610]
<3>[ 6.956848] I[0: iptables: 610] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 6.956848] I[0: iptables: 610]
<3>[ 6.956878] I[0: iptables: 610] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 6.956878] I[0: iptables: 610]
<3>[ 6.956939] I[0: iptables: 610] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 6.956939] I[0: iptables: 610]
<3>[ 6.956970] I[0: iptables: 610] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 6.956970] I[0: iptables: 610]
<6>[ 6.990631] [3: main: 191] [c3] !@Boot: beginofpreloadClasses()
<6>[ 7.002807] [1: pprr: 624] [c1] !@Boot: beginofpreloadResources()
<6>[ 7.058593] [0: wcnd: 218] [c0] mdbg_proc->write_buf:at+spatgetcp2info
<3>[ 7.059234] [0: kworker/0:0: 4] [c0] [SDIOTRAN]sdio_pseudo_atc_handler:ENTRY
<3>[ 7.059295] [0: kworker/0:0: 4] [c0] [SDIOTRAN]sdio_pseudo_atc_handler:tran_callback=c02fbbd8
<6>[ 7.059722] [0: kworker/0:0: 4] [c0] mdbg_at_cmd_read:marlin:PLD VER: MARLIN_15C_SS_W16.06.5_Debug 02-05-2016 10:36:56
<3>[ 7.305145] I[0: ip6tables: 698] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 7.305145] I[0: ip6tables: 698]
<6>[ 7.522674] [2: AudioOut_2: 466] [c2] [ASoC: VBC ] VBC DAC EQ Apply 'Headset'
<6>[ 7.522888] [2: AudioOut_2: 466] [c2] [ASoC: PCM ] VBC Open Playback
<6>[ 7.523040] [2: AudioOut_2: 466] [c2] [ASoC:CDCV4] Playback rate is [44100]
<6>[ 7.523071] [2: AudioOut_2: 466] [c2] [ASoC: PCM ] chan=2 totsize=15360 period=3840
<4>[ 7.523101] [2: AudioOut_2: 466] [c2] alloc dma chn is 25, and chn reg base is f0859600, dma chip base is f0858000
<4>[ 7.523132] [2: AudioOut_2: 466] [c2] alloc dma chn is 26, and chn reg base is f0859640, dma chip base is f0858000
<6>[ 7.523468] [1: mediaserver: 455] [c1] [ASoC:CDCV4] Config inter PA 0x330
<6>[ 7.523620] [1: mediaserver: 455] [c1] [ASoC:CDCV4] Set PGA[SPKL] to 10
<6>[ 7.523681] [1: mediaserver: 455] [c1] [ASoC:CDCV4] Set PGA[DACL] to 7
<6>[ 7.523773] [1: mediaserver: 455] [c1] [ASoC:CDCV4] Set PGA[SPKR] to 10
<6>[ 7.523803] [1: mediaserver: 455] [c1] [ASoC:CDCV4] Set PGA[DACR] to 7
<6>[ 7.523925] [1: mediaserver: 455] [c1] [ASoC:CDCV4] Set DACL->SPKL Switch On
<6>[ 7.524444] [3: mediaserver: 455] [c3] [ASoC:CDCV4] Set DACR->SPKL Switch On
<6>[ 7.525634] [3: mediaserver: 455] [c3] [ASoC:BOARD] Ext Spk Switch On
<6>[ 7.526641] [3: mediaserver: 455] [c3] [ASoC:BOARD] Mic Jack Switch Off
<6>[ 7.527435] [3: mediaserver: 455] [c3] [ASoC:CDCV4] Set MAIN MIC->ADCL Switch Off
<6>[ 7.528289] [3: mediaserver: 455] [c3] [ASoC:CDCV4] Set MAIN MIC->ADCR Switch Off
<6>[ 7.528991] [3: mediaserver: 455] [c3] [ASoC:BOARD] Aux Mic Jack Switch Off
<6>[ 7.529083] [3: mediaserver: 455] [c3] [ASoC:BOARD] HP Mic Jack Switch Off
<6>[ 7.529205] [3: mediaserver: 455] [c3] [ASoC:BOARD] Line Jack Switch Off
<6>[ 7.529296] [3: mediaserver: 455] [c3] [ASoC:BOARD] Dig FM Jack Switch Off
<6>[ 7.529449] [3: mediaserver: 455] [c3] [ASoC:BOARD] HeadPhone Jack Switch Off
<6>[ 7.529541] [3: mediaserver: 455] [c3] [ASoC:BOARD] Ext Ear Switch Off
<6>[ 7.529602] [3: mediaserver: 455] [c3] [ASoC: VBC ] VBC DAC EQ Select 3 max 4
<6>[ 7.529632] [3: mediaserver: 455] [c3] [ASoC: VBC ] VBC DAC EQ Apply 'Handsfree'
<3>[ 7.545776] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] ERR: Can't get vbat!
<3>[ 7.545837] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90
<6>[ 7.545867] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] sprd_codec_analog_open get here, true
<6>[ 7.546142] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] DAC On
<6>[ 7.546295] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] switch_event Switch DACR(on) Event is PRE_PMU
<6>[ 7.546325] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] switch_event Switch DACL(on) Event is PRE_PMU
<3>[ 7.546386] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90
<3>[ 7.546417] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90
<6>[ 7.546478] [3: AudioOut_2: 466] [c3] [ASoC:CDCV4] inter PA Switch On
<6>[ 7.565460] [1: AudioOut_2: 466] [c1] [ASoC: PCM ] S
<6>[ 7.723175] [2: prct_1: 655] [c2] !@prldclss1: 705 classes in 644ms.
<6>[ 8.062438] [2: wcnd: 187] [c2] mdbg_proc->write_buf:at+aptime=1,4,22,12,41,0
<3>[ 8.062499] [2: wcnd: 187] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 8.062499] [2: wcnd: 187]
<3>[ 8.065032] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 8.065032] I[0: swapper/0: 0]
<3>[ 8.065093] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 8.065093] I[0: swapper/0: 0]
<3>[ 8.065124] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 8.065124] I[0: swapper/0: 0]
<3>[ 8.065185] I[0: swapper/0: 0] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 8.065185] I[0: swapper/0: 0]
<3>[ 8.065246] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 8.065246] I[0: swapper/0: 0]
<3>[ 8.065734] [0: kworker/0:0: 4] [c0] [SDIOTRAN]sdio_pseudo_atc_handler:ENTRY
<3>[ 8.065765] [0: kworker/0:0: 4] [c0] [SDIOTRAN]sdio_pseudo_atc_handler:tran_callback=c02fbbd8
<6>[ 8.066009] [0: kworker/0:0: 4] [c0] mdbg_at_cmd_read:ap 1-4,22:12:41.0
<6>[ 8.066009] [0: kworker/0:0: 4]
<6>[ 8.262145] [0: prct_2: 656] [c0] !@prldclss2: 495 classes in 1195ms.
<6>[ 8.343017] [1: main: 191] [c1] !@prldclssM: 1805 classes in 1279ms.
<3>[ 8.405151] I[1: swapper/1: 0] [c1] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 8.405151] I[1: swapper/1: 0]
<6>[ 8.638977] [2: main: 191] [c2] !@Boot: EndofpreloadClasses()
<6>[ 8.708740] [2: main: 191] [c2] !@Boot: beginofpreparewebview()
<6>[ 8.714630] [2: main: 191] [c2] !@Boot: endofpreparewebview()
<6>[ 8.799560] [3: pprr: 624] [c3] !@Boot: End of preloadResources()
<6>[ 9.044708] [2: system_server: 779] [c2] !@Boot: Entered the Android system server!
<6>[ 9.501098] [2: system_server: 800] [c2] [SENSOR] bma2x2_enable_store: [1]
<6>[ 9.501129] [2: system_server: 800] [c2] [SENSOR] bma2x2_set_enable: enable[1], pre_enable[0]
<6>[ 9.501159] [2: system_server: 800] [c2] [SENSOR] bma2x2_set_mode: mode[0]
<6>[ 9.508758] [2: system_server: 800] [c2] [SENSOR] bma2x2_set_mode: comres[0]
<3>[ 9.509399] [2: system_server: 800] [c2] [SENSOR] bma2x2_open_calibration: No Calibration
<6>[ 9.509429] [2: system_server: 800] [c2] [SENSOR] bma2x2_set_enable: enable[1]
<6>[ 9.509979] [2: system_server: 800] [c2] [SENSOR] proximity_enable_store: new_value = 1, pre_enable = 0
<6>[ 9.545227] [3: system_server: 800] [c3] [SENSOR] proximity_vled_onoff: on
<6>[ 9.545532] [3: system_server: 800] [c3] event:0x40, best_data:0x325aa0
<6>[ 9.545593] [3: system_server: 800] [c3] sc271x_regulator_event()->Line:404, --REGULATOR_EVENT_VOLTAGE_CHANGE--> vddsim2 event 64, data 3300000
<6>[ 9.578277] [3: system_server: 800] [c3] [SENSOR] proximity_open_cancelation: prox_cal= 0x0, high_thresh= 0x13, low_thresh= 0xe
<6>[ 9.580535] [3: system_server: 800] [c3] [SENSOR] proximity_enable_store: enable = 1
<6>[ 9.581054] [3: system_server: 800] [c3] [SENSOR] bma2x2_enable_store: [0]
<6>[ 9.581085] [3: system_server: 800] [c3] [SENSOR] bma2x2_set_enable: enable[0], pre_enable[1]
<6>[ 9.581115] [3: system_server: 800] [c3] [SENSOR] bma2x2_set_mode: mode[2]
<6>[ 9.587341] [3: system_server: 800] [c3] [SENSOR] bma2x2_set_mode: comres[0]
<6>[ 9.587615] [3: system_server: 800] [c3] [SENSOR] proximity_enable_store: new_value = 0, pre_enable = 1
<6>[ 9.588073] [3: system_server: 800] [c3] [SENSOR] proximity_vled_onoff: off
<6>[ 9.588256] [3: system_server: 800] [c3] event:0x40, best_data:0x325aa0
<6>[ 9.588287] [3: system_server: 800] [c3] sc271x_regulator_event()->Line:404, --REGULATOR_EVENT_VOLTAGE_CHANGE--> vddsim2 event 64, data 3300000
<6>[ 9.588317] [3: system_server: 800] [c3] event:0x80, best_data:0x0
<6>[ 9.588317] [3: system_server: 800] [c3] sc271x_regulator_event()->Line:420, --REGULATOR_EVENT_DISABLE--> vddsim2 event 128
<6>[ 9.615173] [0: system_server: 800] [c0] [SENSOR] proximity_enable_store: enable = 0
<6>[ 10.430938] [1: system_server: 779] [c1] request_suspend_state: wakeup (3->0) at 10415924071 (2018-01-05 03:12:43.940979003 UTC)
<6>[ 10.519714] [0: system_server: 779] [c0] !@Boot: Start PackageManagerService
<6>[ 13.161376] [1: pkgld: 221] [c1] sdcardfs: inotify event: 00000400
<6>[ 13.161407] [1: pkgld: 221] [c1] sdcardfs: inotify event: 00008000
<6>[ 13.162170] [1: pkgld: 221] [c1] sdcardfs: read_package_list
<6>[ 13.241577] [3: system_server: 779] [c3] !@Boot: End PackageManagerService
<6>[ 13.274108] [1: system_server: 779] [c1] !@ USE_STATIC_LIGHTS_HAL
<6>[ 13.274108] [1: system_server: 779]
<6>[ 13.274169] [1: system_server: 779] [c1] !@ lights hal name : Samsung lights Module
<6>[ 13.274169] [1: system_server: 779]
<6>[ 13.274230] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[0][0] : /sys/class/leds/lcd-backlight/brightness
<6>[ 13.274230] [1: system_server: 779]
<6>[ 13.274322] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.274322] [1: system_server: 779]
<6>[ 13.274383] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[0][1] : /sys/class/backlight/panel/brightness
<6>[ 13.274383] [1: system_server: 779]
<6>[ 13.274841] [1: system_server: 779] [c1] !@ initialize_fds : FOUND! : 0x4b
<6>[ 13.274841] [1: system_server: 779]
<6>[ 13.274871] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[1][0] : /sys/class/backlight/panel_1/brightness
<6>[ 13.274871] [1: system_server: 779]
<6>[ 13.274963] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.274963] [1: system_server: 779]
<6>[ 13.274993] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[1][1] : (null)
<6>[ 13.274993] [1: system_server: 779]
<6>[ 13.275054] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[2][0] : /sys/class/sec/sec_touchkey/brightness
<6>[ 13.275054] [1: system_server: 779]
<6>[ 13.275268] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [13]
<6>[ 13.275268] [1: system_server: 779]
<6>[ 13.275329] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[2][1] : /sys/class/leds/button-backlight/brightness
<6>[ 13.275329] [1: system_server: 779]
<6>[ 13.275390] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.275390] [1: system_server: 779]
<6>[ 13.275451] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[2][2] : /sys/class/backlight/touchkey-led/brightness
<6>[ 13.275451] [1: system_server: 779]
<6>[ 13.275512] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.275512] [1: system_server: 779]
<6>[ 13.275573] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[2][3] : (null)
<6>[ 13.275573] [1: system_server: 779]
<6>[ 13.275604] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[3][0] : /sys/class/sec/sec_keypad/brightness
<6>[ 13.275604] [1: system_server: 779]
<6>[ 13.275665] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.275665] [1: system_server: 779]
<6>[ 13.275726] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[3][1] : /sys/class/leds/keyboard-backlight/brightness
<6>[ 13.275726] [1: system_server: 779]
<6>[ 13.275787] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.275787] [1: system_server: 779]
<6>[ 13.275817] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[3][2] : (null)
<6>[ 13.275817] [1: system_server: 779]
<6>[ 13.275878] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[4][0] : /sys/class/sec/led/led_pattern
<6>[ 13.275878] [1: system_server: 779]
<6>[ 13.275939] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.275939] [1: system_server: 779]
<6>[ 13.275970] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[4][1] : (null)
<6>[ 13.275970] [1: system_server: 779]
<6>[ 13.276031] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[5][0] : /sys/class/sec/led/led_blink
<6>[ 13.276031] [1: system_server: 779]
<6>[ 13.276092] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 13.276092] [1: system_server: 779]
<6>[ 13.276153] [1: system_server: 779] [c1] !@ initialize_fds : g_lights_file_paths[5][1] : (null)
<6>[ 13.276153] [1: system_server: 779]
<6>[ 13.276184] [1: system_server: 779] [c1] !@ initialize_fds_off : ffffffff
<6>[ 13.276184] [1: system_server: 779]
<6>[ 13.294281] [3: servicemanager: 164] [c3] binder: 164:164 BC_REQUEST_DEATH_NOTIFICATION death notification already set
<6>[ 13.304870] [1: system_server: 779] [c1] !@Battery capacity = 280000
<6>[ 13.311584] [2: healthd: 161] [c2] BatteryPropertiesRegistrar: registerListener : start
<6>[ 13.313476] [2: healthd: 161] [c2] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 32.
<6>[ 13.313568] [2: healthd: 161] [c2] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 59.
<3>[ 13.313598] [2: healthd: 161] [c2] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22)
<4>[ 13.313720] [2: healthd: 161] [c2] healthd: battery l=50 v=3926 t=31.5 h=2 st=2 c=0 o=4 ca=174 ct=1 ps=0 hv=0 chg=u
<6>[ 13.313751] [2: healthd: 161] [c2] healthd-android: healthd_mode_android_battery_update
<6>[ 13.313781] [2: healthd: 161] [c2] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 13.313812] [2: healthd: 161] [c2] IBatteryPropertiesListener : batteryPropertiesChanged!
<6>[ 13.313812] [2: healthd: 161] : BatteryPropertiesRegistrar: notifyListeners : done
<6>[ 13.314422] [2: healthd: 161] [c2] BatteryPropertiesRegistrar: registerListener : done
<6>[ 13.314605] [3: Binder_2: 792] [c3] !@BatteryListener : batteryPropertiesChanged!
<6>[ 13.443939] [1: AudioOut_2: 466] [c1] [ASoC: PCM ] E
<6>[ 13.444274] [1: AudioOut_2: 466] [c1] [ASoC: PCM ] VBC Close Playback
<6>[ 14.201568] [3: InputReader: 832] [c3] !@Ignoring sensor_device, nodeNumber: 5, deviceName: accelerometer_sensor
<6>[ 14.201568] [3: InputReader: 832]
<6>[ 14.201751] [3: InputReader: 832] [c3] !@Ignoring sensor_device, nodeNumber: 4, deviceName: proximity_sensor
<6>[ 14.201751] [3: InputReader: 832]
<6>[ 14.474853] [1: InputReader: 832] [c1] !@Could not open sysfs for EdgeScreen
<6>[ 14.552520] [0: lmkd: 163] [c0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 14.552551] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 14.552581] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 14.552612] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[ 14.552612] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[ 14.552642] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 14.552673] [0: lmkd: 163] [c0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[ 14.745147] [2: pkgld: 221] [c2] sdcardfs: inotify event: 00000400
<6>[ 14.745178] [2: pkgld: 221] [c2] sdcardfs: inotify event: 00008000
<6>[ 14.745239] [2: pkgld: 221] [c2] sdcardfs: read_package_list
<6>[ 15.382751] I[0: swapper/0: 0] [c0] alarm set by [kworker/u8:0], triggered at 2018-1-5 3:12:48
<6>[ 15.382843] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-13,val->intval = 3958
<6>[ 15.382873] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-14,val->intval = 3958
<6>[ 15.382904] [0: kworker/u8:0: 6] [c0] sprdfgu: rint:280,value.intval:315
<6>[ 15.382965] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-14,val->intval = 3861
<6>[ 15.382995] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-19,val->intval = 348
<6>[ 15.383026] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-20,val->intval = 348
<6>[ 15.383117] [0: kworker/u8:0: 6] [c0] read channel [1426]
<6>[ 15.383270] [0: kworker/u8:0: 6] [c0] read channel [1426]
<6>[ 15.383361] [0: kworker/u8:0: 6] [c0] read channel [1426]
<6>[ 15.383483] [0: kworker/u8:0: 6] [c0] read channel [1424]
<6>[ 15.383575] [0: kworker/u8:0: 6] [c0] read channel [1424]
<6>[ 15.383605] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1425)
<6>[ 15.383728] [0: kworker/u8:0: 6] [c0] read channel [1427]
<6>[ 15.383819] [0: kworker/u8:0: 6] [c0] read channel [1426]
<6>[ 15.383941] [0: kworker/u8:0: 6] [c0] read channel [1426]
<6>[ 15.384033] [0: kworker/u8:0: 6] [c0] read channel [1428]
<6>[ 15.384155] [0: kworker/u8:0: 6] [c0] read channel [1425]
<6>[ 15.384155] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_get_temperature_by_adc: Temp(315), Temp-ADC(1426)
<6>[ 15.384216] [0: kworker/u8:0: 6] [c0] sprdfgu: sprdfgu_read_soc delta 1mAh,sprdfgu_data.init_clbcnt:19836144
<6>[ 15.384246] [0: kworker/u8:0: 6] [c0] sprdfgu: sprdfgu_read_soc delta capacity 0,full capacity 2040
<6>[ 15.384246] [0: kworker/u8:0: 6] [c0] sprdfgu: sprdfgu_read_soc soc 50,sprdfgu_data.init_cap 50
<6>[ 15.384277] [0: kworker/u8:0: 6] [c0] sprdfgu: rint:280,value.intval:315
<6>[ 15.385467] [0: kworker/u8:0: 6] [c0] SM5701_get_charging_status : SM5701_STATUS2 : 0x08
<6>[ 15.387634] [0: kworker/u8:0: 6] [c0] sprdfgu: cnom_temp 2040, delta_soc 0,comp_soc50,soc 50,temp 31
<6>[ 15.387695] [0: kworker/u8:0: 6] [c0] fgu_capacity: = 50,flush_time: = 14,period_time:=10
<6>[ 15.387725] [0: kworker/u8:0: 6] [c0] sec_hal_fg_get_property-45,val->intval = 500
<6>[ 15.387756] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_get_battery_info:Vnow(3958mV),Inow(348mA),Imax(460mA),SOC(50%),Tbat(315),Tchg(0),is_hc_usb(0)
<6>[ 15.388854] [0: kworker/u8:0: 6] [c0] SM5701_get_battery_present: SM5701_STATUS1 (0x24)
<6>[ 15.388885] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_battery_cable_check: Battery Connected
<6>[ 15.388916] [0: kworker/u8:0: 6] [c0] sec-battery sec-battery.4: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<6>[ 15.391723] [1: healthd: 161] [c1] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 32.
<6>[ 15.391815] [1: healthd: 161] [c1] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 59.
<3>[ 15.391845] [1: healthd: 161] [c1] sec_bat_show_attrs: Fail to battery->pdata->fuelgauge_name get (39=>-22)
<4>[ 15.391998] [1: healthd: 161] [c1] healthd: battery l=50 v=3958 t=31.5 h=2 st=2 c=0 o=4 ca=348 ct=1 ps=0 hv=0 chg=u
<6>[ 15.392028] [1: healthd: 161] [c1] healthd-android: healthd_mode_android_battery_update
<6>[ 15.392059] [1: healthd: 161] [c1] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 15.392089] [1: healthd: 161] [c1] IBatteryPropertiesListener : batteryPropertiesChanged!
<6>[ 15.392089] [1: healthd: 161] : BatteryPropertiesRegistrar: notifyListeners : done
<6>[ 15.392395] [2: Binder_3: 855] [c2] !@BatteryListener : batteryPropertiesChanged!
<7>[ 16.054473] [1: system_server: 779] [c1] usb: state_show buf=DISCONNECTED
<6>[ 16.056915] [1: system_server: 779] [c1] acc_open
<6>[ 16.056976] [1: system_server: 779] [c1] acc_release
<6>[ 16.114532] [1: system_server: 779] [c1] [LCD] gen_panel_set_mdnie: mode(4), scenario(0), index(38)
<6>[ 16.114562] [1: system_server: 779] [c1] [LCD] gen-panel-nv-read-enable-cmds
<6>[ 16.114624] [1: system_server: 779] [c1] [LCD] gen-panel-mdnie-auto-ui-mode-cmds
<6>[ 16.114776] [1: system_server: 779] [c1] [LCD] gen-panel-nv-read-disable-cmds
<6>[ 16.616485] [1: system_server: 779] [c1] !@ SPECIFIC_HBM_FEATURE = false, sys_hbm_level=
<6>[ 16.633575] [2: Thread-112: 890] [c2] gen_panel_backlight_set_brightness: brightness(255), tune_level(350)
<6>[ 16.633636] [2: Thread-112: 890] [c2] [LCD] gen-panel-nv-read-enable-cmds
<6>[ 16.633697] [2: Thread-112: 890] [c2] [LCD] gen-panel-gamma-cmds
<6>[ 16.633728] [3:BlankUnblankInS: 815] [c3] !@display_state: UNKNOWN -> ON
<6>[ 16.633758] [2: Thread-112: 890] [c2] [LCD] gen-panel-aid-cmds
<6>[ 16.633819] [2: Thread-112: 890] [c2] [LCD] gen-panel-tset-cmds
<6>[ 16.633880] [2: Thread-112: 890] [c2] [LCD] gen-panel-elvss-cmds
<6>[ 16.633941] [2: Thread-112: 890] [c2] [LCD] gen-panel-acl-on-cmds
<6>[ 16.634002] [2: Thread-112: 890] [c2] [LCD] gen-panel-gamma-update-cmds
<6>[ 16.645202] [0: Thread-112: 890] [c0] [LCD] gen-panel-nv-read-disable-cmds
<6>[ 16.654815] [0:BlankUnblankInS: 815] [c0] !@display_state: ON -> ON
<6>[ 16.664031] [1: system_server: 779] [c1] !@Led Charging Settings = true
<6>[ 16.664123] [1: system_server: 779] [c1] !@Led Low Battery Settings = true
<6>[ 16.664733] [1: system_server: 779] [c1] !@AdaptiveFastCharging Settings = true
<6>[ 16.665344] [1: system_server: 779] [c1] !@[BatteryInfo] IOException in readFromFile
<6>[ 16.665832] [1: system_server: 779] [c1] !@WirelessFastCharging Settings = true
<7>[ 16.790283] [0:WifiStateMachin: 860] [c0] sc2331 sc2331.0: no of_node; not parsing pinctrl DT
<0>[ 16.790344] [0:WifiStateMachin: 860] [c0] [SC2331]CONFIG_WCN_EXTENSION is defined!
<0>[ 16.790374] [0:WifiStateMachin: 860] [c0] [SC2331][wlan_module_init] [ version:0x28 ] [ time(May 18 2017 18:48:22) ][(20160107)(for tpt & fix BUG_ON)]
<0>[ 16.790405] [0:WifiStateMachin: 860] [c0] [SC2331]sdio is ready !!!
<0>[ 16.790618] [0:WifiStateMachin: 860] [c0] [SC2331][SDIO_TX_CHN][0x7][0x3400]
<0>[ 16.790710] [0:WifiStateMachin: 860] [c0] [SC2331][SDIO_RX_CHN][0xeb00][0x3000]
<0>[ 16.790740] [0:WifiStateMachin: 860] [c0] [wifi_256k_alloc][0][0xeec00000]
<0>[ 16.790802] [0:WifiStateMachin: 860] [c0] [wifi_256k_alloc][1][0xeec40000]
<0>[ 16.790863] [0:WifiStateMachin: 860] [c0] [SC2331]wlan_wiphy_new enter
<0>[ 16.806457] [0:WifiStateMachin: 860] [c0] [SC2331][wlan_vif_init][0][wlan0][0xed113000][addr]:90 97 f3 ec 46 b8
<0>[ 16.806457] [0:WifiStateMachin: 860]
<0>[ 16.814697] [0:WifiStateMachin: 860] [c0] [SC2331][wlan_vif_init][1][p2p0][0xed111000][addr]:92 97 f3 ec 46 b8
<0>[ 16.814697] [0:WifiStateMachin: 860]
<0>[ 16.818969] [2: wlan_trans: 929] [c2] [SC2331]wlan_trans_thread enter
<4>[ 16.819763] [2: wlan_trans: 929] [c2] [SC2331]sched_setscheduler, prio:90,ret:0
<0>[ 16.823120] [1: wlan_core: 930] [c1] [SC2331]wlan_core_thread enter new
<4>[ 16.823211] [0:WifiStateMachin: 860] [c0] [SC2331]wlan_nl_init
<0>[ 16.823272] [0:WifiStateMachin: 860] [c0] [SC2331]wlan_module_init ok!
<6>[ 16.827392] [2: download: 173] [c2] mdbg_proc->write_buf:startwcn
<6>[ 16.828094] [2: wcnd: 218] [c2] mdbg_proc->write_buf:at+loopcheck
<6>[ 16.828124] [2: wcnd: 218] [c2] mdbg start wake marlin
<3>[ 16.828155] [2: wcnd: 218] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 16.828155] [2: wcnd: 218]
<3>[ 16.830688] I[0: netd: 778] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 16.830688] I[0: netd: 778]
<3>[ 16.830749] I[0: netd: 778] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 16.830749] I[0: netd: 778]
<3>[ 16.830810] I[0: netd: 778] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 16.830810] I[0: netd: 778]
<3>[ 16.830841] I[0: netd: 778] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 16.830841] I[0: netd: 778]
<3>[ 16.830902] I[0: netd: 778] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 16.830902] I[0: netd: 778]
<6>[ 17.137603] [1: kworker/1:1: 56] [c1] usb_notify: reserve_state_check booting delay finished
<6>[ 17.137634] [1: kworker/1:1: 56] [c1] usb_notify: reserve_state_check event=vbus(1) enable=1
<6>[ 17.137634] [1: kworker/1:1: 56] [c1] usb_notify: otg_notifier_callback event=vbus(1)
<6>[ 17.137695] [1: kworker/u8:0: 6] [c1] usb_notify: otg_notify_state+ event=vbus(1), enable=on
<6>[ 17.137725] [1: kworker/u8:0: 6] [c1] usb_notifier: dwc3_set_peripheral+ enable=1
<6>[ 17.137756] [1: kworker/u8:0: 6] [c1] usb: dwc_peripheral_start d->vbus=0, enable=1
<6>[ 17.137756] [1: kworker/u8:0: 6] [c1] udc_enable
<3>[ 17.175140] I[0: init: 981] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 17.175140] I[0: init: 981]
<6>[ 17.176208] [3: kworker/u8:0: 6] [c3] usb_startup ctrl0 value = 0xd0a00020
<6>[ 17.176239] [3: kworker/u8:0: 6] [c3] usb_startup ctrl1 value = 0x1730
<4>[ 17.201293] I[0: wpa_supplicant: 981] [c0] SRP: Device mode
<6>[ 17.201354] [3: kworker/u8:0: 6] [c3] usb_notifier: dwc3_set_peripheral-
<6>[ 17.201385] [3: kworker/u8:0: 6] [c3] usb_notify: otg_notify_state- event=vbus, cable=vbus
<4>[ 17.302795] I[0: mmcqd/0: 108] [c0] lx_state = 2 ep0_state = 0 addr = 0x0 USB RESET
<4>[ 17.342742] [1: wpa_supplicant: 981] [c1] [SC2331][itm_wlan_change_mode][0][1]
<4>[ 17.342803] [1: wpa_supplicant: 981] [c1] [SC2331][SEND_CMD][0][WIFI_CMD_SET_DEV_OPEN]
<4>[ 17.342895] [2: wlan_trans: 929] [c2] [SC2331]time[1]
<3>[ 17.342956] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 17.342956] [2: wlan_trans: 929]
<3>[ 17.345489] I[0: servicemanager: 164] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 17.345489] I[0: servicemanager: 164]
<3>[ 17.345550] I[0: servicemanager: 164] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 17.345550] I[0: servicemanager: 164]
<3>[ 17.345581] I[0: servicemanager: 164] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 17.345581] I[0: servicemanager: 164]
<3>[ 17.345611] I[0: servicemanager: 164] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 17.345611] I[0: servicemanager: 164]
<3>[ 17.345703] I[0: servicemanager: 164] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 17.345703] I[0: servicemanager: 164]
<4>[ 17.350891] [0: wlan_core: 930] [c0] [SC2331][RECV_RSP][0][WIFI_CMD_SET_DEV_OPEN][4]
<4>[ 17.351226] [1: wlan_core: 930] [c1] [SC2331][RECV_EVENT][0][WIFI_EVENT_REPORT_VERSION][31]
<0>[ 17.351287] [0: wpa_supplicant: 981] [c0] [SC2331][wlan_cmd_set_psm_cap psm is:normal mode]
<4>[ 17.351287] [0: wpa_supplicant: 981] [c0] [SC2331][SEND_CMD][0][WIFI_CMD_NPI_MSG]
<4>[ 17.351837] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][0][WIFI_CMD_NPI_MSG][8]
<4>[ 17.351928] [1: wpa_supplicant: 981] [c1] [SC2331]WIFI_CMD_NPI_MSG cmd ok!
<0>[ 17.351928] [1: wpa_supplicant: 981] [c1] [SC2331][Send wlan capability = 0x3 success!]
<4>[ 17.355743] [1: wpa_supplicant: 981] [c1] [SC2331]wlan0 open
<4>[ 17.357482] I[0:recentsactivity: 991] [c0] SPEED ENUM
<7>[ 17.372222] I[0:ndroid.systemui: 910] [c0] usb: GET_DES
<7>[ 17.374420] [0: kworker/0:0: 4] [c0] usb: android_work config= (null),connected=1,sw_connected=0
<7>[ 17.374847] [0: kworker/0:0: 4] [c0] usb: android_work sent uevent USB_STATE=CONNECTED
<7>[ 17.375488] I[0:ndroid.systemui: 910] [c0] usb: set_config_number single config num=0
<7>[ 17.375518] I[0:ndroid.systemui: 910] [c0] usb: set_interface_count next_interface_id=4
<7>[ 17.375946] I[0: swapper/0: 0] [c0] usb: set_config_number single config num=0
<7>[ 17.375976] I[0: swapper/0: 0] [c0] usb: set_interface_count next_interface_id=4
<4>[ 17.426513] [1: wpa_supplicant: 981] [c1] [SC2331][wlan_cfg80211_flush_pmksa][0] enter
<4>[ 17.426574] [1: wpa_supplicant: 981] [c1] [SC2331][SEND_CMD][0][WIFI_CMD_FLUSH_PMKSA]
<4>[ 17.427337] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][WIFI_CMD_FLUSH_PMKSA][4]
<6>[ 17.440246] I[0: GCDaemon: 790] [c0] android_usb gadget: high-speed config #1: android
<7>[ 17.440277] I[0: GCDaemon: 790] [c0] usb: set_config e mtp[0]
<4>[ 17.440338] I[0: GCDaemon: 790] [c0] dwc_otg_ep_reset_ep_pid( in_ep1 )
<4>[ 17.440338] I[0: GCDaemon: 790] [c0] dwc_otg_ep_reset_ep_pid( out_ep1 )
<7>[ 17.440368] I[0: GCDaemon: 790] [c0] usb: set_config e acm[1]
<7>[ 17.440399] I[0: GCDaemon: 790] [c0] usb: set_config e acm[2]
<4>[ 17.440399] I[0: GCDaemon: 790] [c0] dwc_otg_ep_reset_ep_pid( in_ep3 )
<4>[ 17.440429] I[0: GCDaemon: 790] [c0] dwc_otg_ep_reset_ep_pid( out_ep2 )
<7>[ 17.440582] I[0: GCDaemon: 790] [c0] usb: set_config e Function FS Gadget[3]
<4>[ 17.440612] I[0: GCDaemon: 790] [c0] dwc_otg_ep_reset_ep_pid( out_ep3 )
<4>[ 17.440643] I[0: GCDaemon: 790] [c0] dwc_otg_ep_reset_ep_pid( in_ep5 )
<7>[ 17.440673] I[0: GCDaemon: 790] [c0] usb: SET_CON
<7>[ 17.440826] [0: kworker/0:0: 4] [c0] usb: android_work config=c0a6dbbc,connected=1,sw_connected=1
<7>[ 17.442993] [0: kworker/0:0: 4] [c0] usb: android_work sent uevent USB_STATE=CONFIGURED
<4>[ 17.547363] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_change_iface][1][0]
<4>[ 17.547424] [2: wpa_supplicant: 981] [c2] [SC2331][itm_wlan_change_mode][1][4]
<4>[ 17.547454] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_SET_DEV_OPEN]
<4>[ 17.550231] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_SET_DEV_OPEN][4]
<0>[ 17.550750] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_cmd_set_psm_cap psm is:normal mode]
<4>[ 17.550781] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_NPI_MSG]
<4>[ 17.551513] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][WIFI_CMD_NPI_MSG][8]
<4>[ 17.552124] [2: wpa_supplicant: 981] [c2] [SC2331]WIFI_CMD_NPI_MSG cmd ok!
<0>[ 17.552154] [2: wpa_supplicant: 981] [c2] [SC2331][Send wlan capability = 0x3 success!]
<4>[ 17.552642] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.552734] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.553222] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.553619] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.553710] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.554046] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.554290] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.554382] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.554443] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.554626] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.555541] [3: wlan_core: 930] [c3] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.556030] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.556427] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.556732] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.556823] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.556915] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.557098] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.557220] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.557434] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.557495] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.557556] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.557800] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.560821] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.560913] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.561645] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<6>[ 17.563934] [0: watchdog: 1040] [c0] !@Sync 0 [01-04 22:12:51.073]
<4>[ 17.564178] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.564239] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.564605] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.564880] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.565002] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.565063] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.565155] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.565429] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.565551] I[2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_mgmt_frame_register][1]
<4>[ 17.565856] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.565917] [2: kworker/2:1: 92] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_REGISTER_FRAME]
<4>[ 17.566009] [2: wpa_supplicant: 981] [c2] [SC2331]p2p0 open
<4>[ 17.566741] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_REGISTER_FRAME][4]
<4>[ 17.606201] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_flush_pmksa][1] enter
<4>[ 17.606262] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][1][WIFI_CMD_FLUSH_PMKSA]
<4>[ 17.606933] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][1][WIFI_CMD_FLUSH_PMKSA][4]
<3>[ 17.695159] I[0: Binder_4: 1010] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 17.695159] I[0: Binder_4: 1010]
<4>[ 17.748779] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_scan][0] enter
<4>[ 17.748809] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SET_WPS_IE]
<3>[ 17.748931] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 17.748931] [2: wlan_trans: 929]
<3>[ 17.748992] I[0: WifiMonitor: 1073] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 17.748992] I[0: WifiMonitor: 1073]
<3>[ 17.749023] I[0: WifiMonitor: 1073] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 17.749023] I[0: WifiMonitor: 1073]
<3>[ 17.749053] I[0: WifiMonitor: 1073] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 17.749053] I[0: WifiMonitor: 1073]
<3>[ 17.749114] I[0: WifiMonitor: 1073] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 17.749114] I[0: WifiMonitor: 1073]
<3>[ 17.749145] I[0: WifiMonitor: 1073] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 17.749145] I[0: WifiMonitor: 1073]
<4>[ 17.749755] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][WIFI_CMD_SET_WPS_IE][4]
<0>[ 17.749816] [2: wpa_supplicant: 981] [c2] [SC2331]scan data 0e 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 00 00 00 00
<0>[ 17.749816] [2: wpa_supplicant: 981]
<4>[ 17.749847] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SET_SCAN]
<4>[ 17.835144] I[2:NuPlayerDriver : 1089] [c2] [SC2331]timer[3]
<4>[ 17.835235] [2: wlan_trans: 929] [c2] [SC2331]time[0]
<4>[ 17.966125] [2: wlan_trans: 929] [c2] [SC2331]time[1]
<4>[ 17.981292] [0: wlan_core: 930] [c0] [SC2331][cfg80211_report_scan_frame 0][line 2005 err]
<6>[ 18.055664] [0: system_server: 779] [c0] !@Boot: Loop forever
<6>[ 18.056457] [0: system_server: 779] [c0] !@[BatteryInfo] InitBatteryInfo()
<6>[ 18.058074] [0: system_server: 779] [c0] !@[BatteryInfo] readFromFile /efs/FactoryApp/asoc: -1
<6>[ 18.058685] [0: system_server: 779] [c0] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 26.
<6>[ 18.058868] [0: system_server: 779] [c0] !@[BatteryInfo] readFromFile /sys/class/power_supply/battery/fg_asoc: -1
<6>[ 18.059417] [0: system_server: 779] [c0] !@[BatteryInfo] writeToFile /efs/FactoryApp/asoc: -1
<6>[ 18.060363] [0: system_server: 779] [c0] !@[BatteryInfo] readFromFile /efs/FactoryApp/batt_discharge_level: 64
<6>[ 18.061126] [0: system_server: 779] [c0] !@[BatteryInfo] readFromFile /efs/FactoryApp/max_current: 518
<6>[ 18.061859] [0: system_server: 779] [c0] !@[BatteryInfo] readFromFile /efs/FactoryApp/max_temp: 362
<6>[ 18.062255] [0: system_server: 779] [c0] sec-battery sec-battery.4: sec_bat_show_attrs: show attr offset : 26.
<6>[ 18.062377] [0: system_server: 779] [c0] !@[BatteryInfo] readFromFile /sys/class/power_supply/battery/fg_asoc: -1
<6>[ 18.062774] [0: system_server: 779] [c0] !@[BatteryInfo] writeToFile /efs/FactoryApp/asoc: -1
<3>[ 18.095153] I[0: swapper/0: 0] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 18.095153] I[0: swapper/0: 0]
<3>[ 18.191955] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 18.191955] [2: wlan_trans: 929]
<3>[ 18.191986] I[0:PowerManagerSer: 811] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 18.191986] I[0:PowerManagerSer: 811]
<3>[ 18.192016] I[0:PowerManagerSer: 811] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 18.192016] I[0:PowerManagerSer: 811]
<3>[ 18.192077] I[0:PowerManagerSer: 811] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 18.192077] I[0:PowerManagerSer: 811]
<3>[ 18.192108] I[0:PowerManagerSer: 811] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 18.192108] I[0:PowerManagerSer: 811]
<3>[ 18.192138] I[0:PowerManagerSer: 811] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 18.192138] I[0:PowerManagerSer: 811]
<4>[ 18.192779] [1: wlan_core: 930] [c1] [SC2331][cfg80211_report_scan_frame 0][line 2005 err]
<4>[ 18.337738] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][0][WIFI_CMD_SET_SCAN][4]
<4>[ 18.337829] [1: wpa_supplicant: 981] [c1] [SC2331]wlan_cfg80211_scan(), ok!
<4>[ 18.339874] [1: wlan_core: 930] [c1] [SC2331]scan number is 3
<4>[ 18.339904] [1: wlan_core: 930] [c1] [SC2331][scan_ssid][0][fbguest][6][-59]
<0>[ 18.339935] [1: wlan_core: 930] [c1] [SC2331]scan bssid is:18 64 72 df 03 61
<0>[ 18.339935] [1: wlan_core: 930]
<4>[ 18.339996] [1: wlan_core: 930] [c1] [SC2331][scan_ssid][0][Verizon-MiFi6620L-B93A][6][-73]
<0>[ 18.339996] [1: wlan_core: 930] [c1] [SC2331]scan bssid is:00 15 ff b9 b9 3a
<0>[ 18.339996] [1: wlan_core: 930]
<4>[ 18.340057] [1: wlan_core: 930] [c1] [SC2331][scan_ssid][0][fbguest][11][-79]
<0>[ 18.340057] [1: wlan_core: 930] [c1] [SC2331]scan bssid is:18 64 72 39 79 20
<0>[ 18.340057] [1: wlan_core: 930]
<4>[ 18.340332] [1: wlan_core: 930] [c1] [SC2331][cfg80211_report_scan_frame 0] ok!
<4>[ 18.357360] [3: wpa_supplicant: 981] [c3] [SC2331]set fcc channel
<4>[ 18.357391] [3: wpa_supplicant: 981] [c3] [SC2331][SEND_CMD][0][WIFI_CMD_SET_FCC_CHANNEL]
<4>[ 18.358825] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][0][WIFI_CMD_SET_FCC_CHANNEL][4]
<4>[ 18.405792] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_set_country_code][enter]
<4>[ 18.405883] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SCAN_NOR_CHANNELS]
<4>[ 18.406799] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][WIFI_CMD_SCAN_NOR_CHANNELS][4]
<6>[ 18.446289] [1: kworker/1:1: 56] [c1] [ASoC:CDCV4] inter PA Switch Off
<4>[ 18.450714] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_scan][0] enter
<4>[ 18.450744] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SET_WPS_IE]
<4>[ 18.451446] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][0][WIFI_CMD_SET_WPS_IE][4]
<0>[ 18.451538] [2: wpa_supplicant: 981] [c2] [SC2331]scan data 0b 01 02 03 04 05 06 07 08 09 0a 0b 00 00 00 00
<0>[ 18.451538] [2: wpa_supplicant: 981]
<4>[ 18.451568] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SET_SCAN]
<6>[ 18.455322] [1: kworker/1:1: 56] [c1] [ASoC:CDCV4] switch_event Switch DACR(on) Event is PRE_PMD
<6>[ 18.455383] [1: kworker/1:1: 56] [c1] [ASoC:CDCV4] switch_event Switch DACL(on) Event is PRE_PMD
<3>[ 18.455474] [1: kworker/1:1: 56] [c1] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90
<3>[ 18.455566] [1: kworker/1:1: 56] [c1] [ASoC:CDCV4] is_low_power_support, chip_id=0x2723, ver_id=0x90
<6>[ 18.455841] [1: kworker/1:1: 56] [c1] [ASoC:CDCV4] DAC Off
<4>[ 18.465118] I[2: swapper/2: 0] [c2] [SC2331]timer[3]
<4>[ 18.465270] [2: wlan_trans: 929] [c2] [SC2331]time[0]
<3>[ 18.535186] I[0:re-initialized>: 1195] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 18.535186] I[0:re-initialized>: 1195]
<4>[ 18.575439] [2: wlan_trans: 929] [c2] [SC2331]time[1]
<3>[ 18.575500] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 18.575500] [2: wlan_trans: 929]
<3>[ 18.575531] I[0: system_server: 779] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 18.575531] I[0: system_server: 779]
<3>[ 18.575561] I[0: system_server: 779] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 18.575561] I[0: system_server: 779]
<3>[ 18.575622] I[0: system_server: 779] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 18.575622] I[0: system_server: 779]
<3>[ 18.575653] I[0: system_server: 779] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 18.575653] I[0: system_server: 779]
<3>[ 18.575714] I[0: system_server: 779] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 18.575714] I[0: system_server: 779]
<4>[ 18.698059] [2: wlan_core: 930] [c2] [SC2331][cfg80211_report_scan_frame 0][line 2005 err]
<6>[ 18.807006] [1: Binder_1: 259] [c1] ion_system_heap_allocate, size: 2560000, time: 4242 us
<4>[ 18.834228] [0: wlan_core: 930] [c0] [SC2331][cfg80211_report_scan_frame 0][line 2005 err]
<4>[ 18.909149] [0: wlan_core: 930] [c0] [SC2331][RECV_RSP][0][WIFI_CMD_SET_SCAN][4]
<4>[ 18.909271] [1: wpa_supplicant: 981] [c1] [SC2331]wlan_cfg80211_scan(), ok!
<4>[ 18.909423] [0: wlan_core: 930] [c0] [SC2331]scan number is 3
<4>[ 18.909454] [0: wlan_core: 930] [c0] [SC2331][scan_ssid][0][Verizon-MiFi6620L-B93A][6][-72]
<0>[ 18.909515] [0: wlan_core: 930] [c0] [SC2331]scan bssid is:00 15 ff b9 b9 3a
<0>[ 18.909515] [0: wlan_core: 930]
<4>[ 18.909545] [0: wlan_core: 930] [c0] [SC2331][scan_ssid][0][fbguest][6][-59]
<0>[ 18.909606] [0: wlan_core: 930] [c0] [SC2331]scan bssid is:18 64 72 df 03 61
<0>[ 18.909606] [0: wlan_core: 930]
<4>[ 18.909637] [0: wlan_core: 930] [c0] [SC2331][scan_ssid][0][fbguest][11][-78]
<0>[ 18.909667] [0: wlan_core: 930] [c0] [SC2331]scan bssid is:18 64 72 39 79 20
<0>[ 18.909667] [0: wlan_core: 930]
<4>[ 18.909912] [0: wlan_core: 930] [c0] [SC2331][cfg80211_report_scan_frame 0] ok!
<4>[ 18.917083] [1: wpa_supplicant: 981] [c1] [SC2331][wlan_set_country_code][enter]
<4>[ 18.917144] [1: wpa_supplicant: 981] [c1] [SC2331][SEND_CMD][0][WIFI_CMD_SCAN_NOR_CHANNELS]
<4>[ 18.917938] [1: wlan_core: 930] [c1] [SC2331][RECV_RSP][0][WIFI_CMD_SCAN_NOR_CHANNELS][4]
<3>[ 18.925140] I[0: .provider.badg: 1216] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 18.925140] I[0: .provider.badg: 1216]
<0>[ 18.928619] [2: wpa_supplicant: 981] [c2] [SC2331]wlan_cmd_set_suspend_mode 0
<4>[ 18.928649] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][NULL]
<3>[ 18.928771] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 18.928771] [2: wlan_trans: 929]
<3>[ 18.928802] I[0: main: 1218] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 18.928802] I[0: main: 1218]
<3>[ 18.928833] I[0: main: 1218] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 18.928833] I[0: main: 1218]
<3>[ 18.928894] I[0: main: 1218] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 18.928894] I[0: main: 1218]
<3>[ 18.928924] I[0: main: 1218] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 18.928924] I[0: main: 1218]
<3>[ 18.929016] I[0: main: 1218] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 18.929016] I[0: main: 1218]
<4>[ 18.929931] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][NULL][4]
<4>[ 18.931671] [2: wpa_supplicant: 981] [c2] [SC2331][wlan_cfg80211_scan][0] enter
<4>[ 18.931701] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SET_WPS_IE]
<4>[ 18.933074] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][WIFI_CMD_SET_WPS_IE][4]
<0>[ 18.933197] [2: wpa_supplicant: 981] [c2] [SC2331]scan data 0b 01 02 03 04 05 06 07 08 09 0a 0b 00 00 00 00
<0>[ 18.933197] [2: wpa_supplicant: 981]
<4>[ 18.933227] [2: wpa_supplicant: 981] [c2] [SC2331][SEND_CMD][0][WIFI_CMD_SET_SCAN]
<4>[ 19.075164] I[2: servicemanager: 164] [c2] [SC2331]timer[3]
<4>[ 19.075286] [2: wlan_trans: 929] [c2] [SC2331]time[0]
<6>[ 19.086364] [3: ApmAudio: 414] [c3] [ASoC: VBC ] Set MUX[ad iis mux] to 2
<6>[ 19.096618] [0: RILReceiver0: 1247] [c0] !@Boot_SVC : RIL_UNSOL_RIL_CONNECTED
<6>[ 19.121856] [3: RILReceiver1: 1250] [c3] !@Boot_SVC : RIL_UNSOL_RIL_CONNECTED
<4>[ 19.143585] [2: wlan_trans: 929] [c2] [SC2331]time[1]
<4>[ 19.149963] [2: wlan_core: 930] [c2] [SC2331][cfg80211_report_scan_frame 0][line 2005 err]
<3>[ 19.275177] I[0: swapper/0: 0] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 19.275177] I[0: swapper/0: 0]
<3>[ 19.345855] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 19.345855] [2: wlan_trans: 929]
<3>[ 19.345886] I[0:id.app.launcher: 1159] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 19.345886] I[0:id.app.launcher: 1159]
<3>[ 19.345916] I[0:id.app.launcher: 1159] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 19.345916] I[0:id.app.launcher: 1159]
<3>[ 19.345947] I[0:id.app.launcher: 1159] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 19.345947] I[0:id.app.launcher: 1159]
<3>[ 19.345977] I[0:id.app.launcher: 1159] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 19.345977] I[0:id.app.launcher: 1159]
<3>[ 19.346038] I[0:id.app.launcher: 1159] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 19.346038] I[0:id.app.launcher: 1159]
<4>[ 19.346496] [2: wlan_core: 930] [c2] [SC2331][cfg80211_report_scan_frame 0][line 2005 err]
<4>[ 19.390960] [2: wlan_core: 930] [c2] [SC2331][RECV_RSP][0][WIFI_CMD_SET_SCAN][4]
<4>[ 19.392181] [2: wpa_supplicant: 981] [c2] [SC2331]wlan_cfg80211_scan(), ok!
<4>[ 19.395050] [2: wlan_core: 930] [c2] [SC2331]scan number is 3
<4>[ 19.395172] [2: wlan_core: 930] [c2] [SC2331][scan_ssid][0][fbguest][6][-59]
<0>[ 19.395202] [2: wlan_core: 930] [c2] [SC2331]scan bssid is:18 64 72 df 03 61
<0>[ 19.395202] [2: wlan_core: 930]
<4>[ 19.395263] [2: wlan_core: 930] [c2] [SC2331][scan_ssid][0][fbguest][6][-82]
<0>[ 19.395263] [2: wlan_core: 930] [c2] [SC2331]scan bssid is:18 64 72 39 89 20
<0>[ 19.395263] [2: wlan_core: 930]
<4>[ 19.395324] [2: wlan_core: 930] [c2] [SC2331][scan_ssid][0][Verizon-MiFi6620L-B93A][6][-73]
<0>[ 19.395324] [2: wlan_core: 930] [c2] [SC2331]scan bssid is:00 15 ff b9 b9 3a
<0>[ 19.395324] [2: wlan_core: 930]
<4>[ 19.395538] [2: wlan_core: 930] [c2] [SC2331][cfg80211_report_scan_frame 0] ok!
<4>[ 19.635162] I[2:earchbox:search: 1231] [c2] [SC2331]timer[3]
<4>[ 19.635253] [2: wlan_trans: 929] [c2] [SC2331]time[0]
<3>[ 19.695220] I[0:WifiStateMachin: 860] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 19.695220] I[0:WifiStateMachin: 860]
<6>[ 20.086578] [0: Binder_2: 264] [c0] ion_system_heap_allocate, size: 1536000, time: 1312 us
<6>[ 20.093994] [1: Binder_5: 1300] [c1] ion_system_heap_allocate, size: 1536000, time: 1343 us
<6>[ 20.095825] [1: Binder_5: 1300] [c1] ion_system_heap_allocate, size: 1536000, time: 1404 us
<6>[ 20.097473] [1: Binder_5: 1300] [c1] ion_system_heap_allocate, size: 1536000, time: 1281 us
<6>[ 20.389587] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 20.389923] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 20.390197] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 20.390319] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 20.390533] [1: Binder_1: 259] [c1] ion_system_heap_allocate, size: 73728, time: 153 us
<6>[ 20.406341] [0: Binder_4: 1081] [c0] ion_system_heap_allocate, size: 73728, time: 61 us
<6>[ 20.406585] [0: Binder_4: 1081] [c0] ion_system_heap_allocate, size: 73728, time: 61 us
<6>[ 20.406768] [0: Binder_4: 1081] [c0] ion_system_heap_allocate, size: 73728, time: 61 us
<6>[ 20.410736] [0: android.ui: 807] [c0] [SENSOR] bma2x2_delay_store: [66]
<6>[ 20.411621] [0: android.ui: 807] [c0] [SENSOR] bma2x2_set_bandwidth: [9]
<6>[ 20.411987] [0: android.ui: 807] [c0] [SENSOR] bma2x2_enable_store: [1]
<6>[ 20.412109] [0: android.ui: 807] [c0] [SENSOR] bma2x2_set_enable: enable[1], pre_enable[0]
<6>[ 20.412109] [0: android.ui: 807] [c0] [SENSOR] bma2x2_set_mode: mode[0]
<6>[ 20.420166] [0: android.ui: 807] [c0] [SENSOR] bma2x2_set_mode: comres[0]
<3>[ 20.420227] [0: android.ui: 807] [c0] [SENSOR] bma2x2_open_calibration: No Calibration
<6>[ 20.420257] [0: android.ui: 807] [c0] [SENSOR] bma2x2_set_enable: enable[1]
<6>[ 20.420867] [1:ActivityManager: 804] [c1] !@Boot: performEnableScreen
<6>[ 20.420959] [1:ActivityManager: 804] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 20.429718] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 20.429840] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 20.430358] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 20.430480] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 20.440185] [2:android.display: 809] [c2] !@Boot: performEnableScreen
<6>[ 20.440307] [2:android.display: 809] [c2] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 20.847534] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 20.848175] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 20.864471] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 20.870178] [2:android.display: 809] [c2] !@Boot: performEnableScreen
<6>[ 21.543853] [0:m.android.phone: 1142] [c0] !@Boot_SVC : setRadioPower on
<6>[ 21.650024] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 21.650115] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 21.650238] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 21.650299] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 21.671356] [1: Binder_5: 1300] [c1] ion_system_heap_allocate, size: 1536000, time: 1220 us
<6>[ 21.672454] [1:android.display: 809] [c1] !@Boot: performEnableScreen
<6>[ 21.672607] [1:android.display: 809] [c1] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 21.685974] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 21.686096] [0:android.display: 809] [c0] !@performEnableScreen return becase StatusBar com.android.systemui is not fully drawn!
<6>[ 21.878326] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 21.878570] [0:android.display: 809] [c0] !@Boot: performEnableScreen
<6>[ 21.891693] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 21.894958] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 22.181945] [3:m.android.phone: 1142] [c3] !@Boot_SVC : setRadioPower on
<4>[ 22.549499] [1: Binder_3: 855] [c1] Rear_Cam_store_flash value = 0
<4>[ 22.549560] [1: Binder_3: 855] [c1] _Sensor_K_SetTorch : mode 0, flash_torch_status = 0
<6>[ 22.549560] [1: Binder_3: 855] [c1] sm5701_set_fleden fled_enable = 0
<6>[ 22.551635] [1: Binder_3: 855] [c1] write SM5701 addr : 0x0f data : 0x0c
<4>[ 22.552886] [1: Binder_3: 855] [c1] sm5701 device id =9, led_status=0
<4>[ 22.552917] [1: Binder_3: 855] [c1] sm5701_led_ready led_status = 0
<4>[ 22.552947] [1: Binder_3: 855] [c1] SM5701_operation_mode_function_control
<4>[ 22.552947] [1: Binder_3: 855] [c1] client:eecda800
<4>[ 22.552978] [1: Binder_3: 855] [c1] client->dev:eecda980
<4>[ 22.553009] [1: Binder_3: 855] [c1] pdata = client->dev.platform_data:eeceb950
<4>[ 22.553009] [1: Binder_3: 855] [c1] pdata->charger_data:eecdb800
<4>[ 22.553039] [1: Binder_3: 855] [c1] pdata->charger_data->cable_type:4
<6>[ 22.553070] [1: Binder_3: 855] [c1] SM5701_set_bstout bstout_mv = 5
<6>[ 22.555206] [1: Binder_3: 855] [c1] write SM5701 addr : 0x14 data : 0x05
<6>[ 22.555236] [1: Binder_3: 855] [c1] SM5701_set_operationmode operation_mode = 4
<6>[ 22.557312] [1: Binder_3: 855] [c1] write SM5701 addr : 0x09 data : 0x64
<4>[ 22.557342] [1: Binder_3: 855] [c1] _Sensor_K_SetTorch : Flash_mode : 0x0
<4>[ 22.585723] [2: wlan_trans: 929] [c2] [SC2331]time[1]
<3>[ 22.585784] [2: wlan_trans: 929] [c2] [SDIOTRAN]set_marlin_wakeup:57-1
<3>[ 22.585784] [2: wlan_trans: 929]
<3>[ 22.585815] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:59-1
<3>[ 22.585815] I[0: swapper/0: 0]
<3>[ 22.585876] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:gpio_opt_tag-1
<3>[ 22.585876] I[0: swapper/0: 0]
<3>[ 22.585906] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:ack-sem
<3>[ 22.585906] I[0: swapper/0: 0]
<3>[ 22.585937] I[0: swapper/0: 0] [c0] [SDIOTRAN]set_marlin_sleep:gpio57-0,user_id-1
<3>[ 22.585937] I[0: swapper/0: 0]
<3>[ 22.585998] I[0: swapper/0: 0] [c0] [SDIOTRAN]marlinwake_irq_handler:59-0
<3>[ 22.585998] I[0: swapper/0: 0]
<6>[ 22.835296] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 22.857299] [2: BootAnimation: 376] [c2] !@BootAnimation : service.bootanim.exit = 1
<6>[ 22.857391] [2: BootAnimation: 376] [c2] !@BootAnimation : @@@@ bootani exit
<6>[ 22.857421] [2: BootAnimation: 376] [c2] !@BootAnimation : service.bootanim.exit = 1
<6>[ 22.857482] [2: BootAnimation: 376] [c2] !@BootAnimation : BootAnimation is completed
<6>[ 22.861175] [2: BootAnimation: 376] [c2] !@BootAnimation : doCleanup() Call
<6>[ 22.870574] [2: BootAnimation: 376] [c2] !@BootAnimation : stopProcess() Call
<6>[ 22.870697] [2: BootAnimation: 376] [c2] !@BootAnimation : kill() Call
<3>[ 22.935150] I[0: Thread-109: 1445] [c0] [SDIOTRAN]gpio_timer_handler:gpio_opt_tag=0
<3>[ 22.935150] I[0: Thread-109: 1445]
<6>[ 23.055053] [3:android.display: 809] [c3] !@Boot: performEnableScreen
<6>[ 23.055297] [3:android.display: 809] [c3] !@Boot: Enabling Screen!
<6>[ 23.062194] [2: system_server: 779] [c2] !@bootCompleted
<4>[ 23.085144] I[2:ndroid.systemui: 910] [c2] [SC2331]timer[3]
<4>[ 23.085205] [2: wlan_trans: 929] [c2] [SC2331]time[0]
<6>[ 23.174316] [3:android.display: 809] [c3] !@Boot: bootcomplete
<6>[ 23.239013] [2: Binder_5: 1300] [c2] ion_system_heap_allocate, size: 1536000, time: 885 us
<6>[ 23.621795] [2: Binder_2: 264] [c2] ion_system_heap_allocate, size: 1536000, time: 885 us
<6>[ 23.693359] [3: Binder_2: 264] [c3] ion_system_heap_allocate, size: 1536000, time: 854 us