blob: 2df0c6e3c47567891129c7d7ca78b0e9c8470f07 [file] [log] [blame]
#include <stdbool.h>
#include <stdint.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <linux/api.h>
#include <arm/linux/api.h>
#include <arm/midr.h>
#include <cpuinfo/log.h>
/*
* Size, in chars, of the on-stack buffer used for parsing lines of /proc/cpuinfo.
* This is also the limit on the length of a single line.
*/
#define BUFFER_SIZE 1024
static uint32_t parse_processor_number(
const char* processor_start,
const char* processor_end)
{
const size_t processor_length = (size_t) (processor_end - processor_start);
if (processor_length == 0) {
cpuinfo_log_warning("Processor number in /proc/cpuinfo is ignored: string is empty");
return 0;
}
uint32_t processor_number = 0;
for (const char* digit_ptr = processor_start; digit_ptr != processor_end; digit_ptr++) {
const uint32_t digit = (uint32_t) (*digit_ptr - '0');
if (digit > 10) {
cpuinfo_log_warning("non-decimal suffix %.*s in /proc/cpuinfo processor number is ignored",
(int) (processor_end - digit_ptr), digit_ptr);
break;
}
processor_number = processor_number * 10 + digit;
}
return processor_number;
}
/*
* Full list of ARM features reported in /proc/cpuinfo:
*
* * swp - support for SWP instruction (deprecated in ARMv7, can be removed in future)
* * half - support for half-word loads and stores. These instruction are part of ARMv4,
* so no need to check it on supported CPUs.
* * thumb - support for 16-bit Thumb instruction set. Note that BX instruction is detected
* by ARMv4T architecture, not by this flag.
* * 26bit - old CPUs merged 26-bit PC and program status register (flags) into 32-bit PC
* and had special instructions for working with packed PC. Now it is all deprecated.
* * fastmult - most old ARM CPUs could only compute 2 bits of multiplication result per clock
* cycle, but CPUs with M suffix (e.g. ARM7TDMI) could compute 4 bits per cycle.
* Of course, now it makes no sense.
* * fpa - floating point accelerator available. On original ARM ABI all floating-point operations
* generated FPA instructions. If FPA was not available, these instructions generated
* "illegal operation" interrupts, and the OS processed them by emulating the FPA instructions.
* Debian used this ABI before it switched to EABI. Now FPA is deprecated.
* * vfp - vector floating point instructions. Available on most modern CPUs (as part of VFPv3).
* Required by Android ARMv7A ABI and by Ubuntu on ARM.
* Note: there is no flag for VFPv2.
* * edsp - V5E instructions: saturating add/sub and 16-bit x 16-bit -> 32/64-bit multiplications.
* Required on Android, supported by all CPUs in production.
* * java - Jazelle extension. Supported on most CPUs.
* * iwmmxt - Intel/Marvell Wireless MMX instructions. 64-bit integer SIMD.
* Supported on XScale (Since PXA270) and Sheeva (PJ1, PJ4) architectures.
* Note that there is no flag for WMMX2 instructions.
* * crunch - Maverick Crunch instructions. Junk.
* * thumbee - ThumbEE instructions. Almost no documentation is available.
* * neon - NEON instructions (aka Advanced SIMD). MVFR1 register gives more
* fine-grained information on particular supported features, but
* the Linux kernel exports only a single flag for all of them.
* According to ARMv7A docs it also implies the availability of VFPv3
* (with 32 double-precision registers d0-d31).
* * vfpv3 - VFPv3 instructions. Available on most modern CPUs. Augment VFPv2 by
* conversion to/from integers and load constant instructions.
* Required by Android ARMv7A ABI and by Ubuntu on ARM.
* * vfpv3d16 - VFPv3 instructions with only 16 double-precision registers (d0-d15).
* * tls - software thread ID registers.
* Used by kernel (and likely libc) for efficient implementation of TLS.
* * vfpv4 - fused multiply-add instructions.
* * idiva - DIV instructions available in ARM mode.
* * idivt - DIV instructions available in Thumb mode.
* * vfpd32 - VFP (of any version) with 32 double-precision registers d0-d31.
* * lpae - Large Physical Address Extension (physical address up to 40 bits).
* * evtstrm - generation of Event Stream by timer.
* * aes - AES instructions.
* * pmull - Polinomial Multiplication instructions.
* * sha1 - SHA1 instructions.
* * sha2 - SHA2 instructions.
* * crc32 - CRC32 instructions.
*
* /proc/cpuinfo on ARM is populated in file arch/arm/kernel/setup.c in Linux kernel
* Note that some devices may use patched Linux kernels with different feature names.
* However, the names above were checked on a large number of /proc/cpuinfo listings.
*/
static void parse_features(
const char* features_start,
const char* features_end,
struct cpuinfo_arm_linux_processor processor[restrict static 1])
{
const char* feature_start = features_start;
const char* feature_end;
/* Mark the features as valid */
processor->flags |= CPUINFO_ARM_LINUX_VALID_FEATURES | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
do {
feature_end = feature_start + 1;
for (; feature_end != features_end; feature_end++) {
if (*feature_end == ' ') {
break;
}
}
const size_t feature_length = (size_t) (feature_end - feature_start);
switch (feature_length) {
case 2:
if (memcmp(feature_start, "fp", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_FP;
#endif
#if CPUINFO_ARCH_ARM
} else if (memcmp(feature_start, "wp", feature_length) == 0) {
/*
* Some AArch64 kernels, including the one on Nexus 5X,
* erroneously report "swp" as "wp" to AArch32 programs
*/
processor->features |= CPUINFO_ARM_LINUX_FEATURE_SWP;
#endif
} else {
goto unexpected;
}
break;
case 3:
if (memcmp(feature_start, "aes", feature_length) == 0) {
#if CPUINFO_ARCH_ARM
processor->features2 |= CPUINFO_ARM_LINUX_FEATURE2_AES;
#elif CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_AES;
#endif
#if CPUINFO_ARCH_ARM
} else if (memcmp(feature_start, "swp", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_SWP;
} else if (memcmp(feature_start, "fpa", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_FPA;
} else if (memcmp(feature_start, "vfp", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_VFP;
} else if (memcmp(feature_start, "tls", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_TLS;
#endif /* CPUINFO_ARCH_ARM */
} else {
goto unexpected;
}
break;
case 4:
if (memcmp(feature_start, "sha1", feature_length) == 0) {
#if CPUINFO_ARCH_ARM
processor->features2 |= CPUINFO_ARM_LINUX_FEATURE2_SHA1;
#elif CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_SHA1;
#endif
} else if (memcmp(feature_start, "sha2", feature_length) == 0) {
#if CPUINFO_ARCH_ARM
processor->features2 |= CPUINFO_ARM_LINUX_FEATURE2_SHA2;
#elif CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_SHA2;
#endif
} else if (memcmp(feature_start, "fphp", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_FPHP;
#endif
} else if (memcmp(feature_start, "fcma", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_FCMA;
#endif
#if CPUINFO_ARCH_ARM
} else if (memcmp(feature_start, "half", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_HALF;
} else if (memcmp(feature_start, "edsp", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_EDSP;
} else if (memcmp(feature_start, "java", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_JAVA;
} else if (memcmp(feature_start, "neon", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_NEON;
} else if (memcmp(feature_start, "lpae", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_LPAE;
} else if (memcmp(feature_start, "tlsi", feature_length) == 0) {
/*
* Some AArch64 kernels, including the one on Nexus 5X,
* erroneously report "tls" as "tlsi" to AArch32 programs
*/
processor->features |= CPUINFO_ARM_LINUX_FEATURE_TLS;
#endif /* CPUINFO_ARCH_ARM */
} else {
goto unexpected;
}
break;
case 5:
if (memcmp(feature_start, "pmull", feature_length) == 0) {
#if CPUINFO_ARCH_ARM
processor->features2 |= CPUINFO_ARM_LINUX_FEATURE2_PMULL;
#elif CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_PMULL;
#endif
} else if (memcmp(feature_start, "crc32", feature_length) == 0) {
#if CPUINFO_ARCH_ARM
processor->features2 |= CPUINFO_ARM_LINUX_FEATURE2_CRC32;
#elif CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_CRC32;
#endif
} else if (memcmp(feature_start, "asimd", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_ASIMD;
#endif
} else if (memcmp(feature_start, "cpuid", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_CPUID;
#endif
} else if (memcmp(feature_start, "jscvt", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_JSCVT;
#endif
} else if (memcmp(feature_start, "lrcpc", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_LRCPC;
#endif
#if CPUINFO_ARCH_ARM
} else if (memcmp(feature_start, "thumb", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_THUMB;
} else if (memcmp(feature_start, "26bit", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_26BIT;
} else if (memcmp(feature_start, "vfpv3", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_VFPV3;
} else if (memcmp(feature_start, "vfpv4", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_VFPV4;
} else if (memcmp(feature_start, "idiva", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_IDIVA;
} else if (memcmp(feature_start, "idivt", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_IDIVT;
#endif /* CPUINFO_ARCH_ARM */
} else {
goto unexpected;
}
break;
#if CPUINFO_ARCH_ARM
case 6:
if (memcmp(feature_start, "iwmmxt", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_IWMMXT;
} else if (memcmp(feature_start, "crunch", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_CRUNCH;
} else if (memcmp(feature_start, "vfpd32", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_VFPD32;
} else {
goto unexpected;
}
break;
#endif /* CPUINFO_ARCH_ARM */
case 7:
if (memcmp(feature_start, "evtstrm", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_EVTSTRM;
} else if (memcmp(feature_start, "atomics", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_ATOMICS;
#endif
} else if (memcmp(feature_start, "asimdhp", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_ASIMDHP;
#endif
#if CPUINFO_ARCH_ARM
} else if (memcmp(feature_start, "thumbee", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_THUMBEE;
#endif /* CPUINFO_ARCH_ARM */
} else {
goto unexpected;
}
break;
case 8:
if (memcmp(feature_start, "asimdrdm", feature_length) == 0) {
#if CPUINFO_ARCH_ARM64
processor->features |= CPUINFO_ARM_LINUX_FEATURE_ASIMDRDM;
#endif
#if CPUINFO_ARCH_ARM
} else if (memcmp(feature_start, "fastmult", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_FASTMULT;
} else if (memcmp(feature_start, "vfpv3d16", feature_length) == 0) {
processor->features |= CPUINFO_ARM_LINUX_FEATURE_VFPV3D16;
#endif /* CPUINFO_ARCH_ARM */
} else {
goto unexpected;
}
break;
default:
unexpected:
cpuinfo_log_warning("unexpected /proc/cpuinfo feature \"%.*s\" is ignored",
(int) feature_length, feature_start);
break;
}
feature_start = feature_end;
for (; feature_start != features_end; feature_start++) {
if (*feature_start != ' ') {
break;
}
}
} while (feature_start != feature_end);
}
static void parse_cpu_architecture(
const char* cpu_architecture_start,
const char* cpu_architecture_end,
struct cpuinfo_arm_linux_processor processor[restrict static 1])
{
const size_t cpu_architecture_length = (size_t) (cpu_architecture_end - cpu_architecture_start);
/* Early AArch64 kernels report "CPU architecture: AArch64" instead of a numeric value 8 */
if (cpu_architecture_length == 7) {
if (memcmp(cpu_architecture_start, "AArch64", cpu_architecture_length) == 0) {
processor->midr = midr_set_architecture(processor->midr, UINT32_C(0xF));
processor->architecture_version = 8;
processor->flags |= CPUINFO_ARM_LINUX_VALID_ARCHITECTURE | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
return;
}
}
uint32_t architecture = 0;
const char* cpu_architecture_ptr = cpu_architecture_start;
for (; cpu_architecture_ptr != cpu_architecture_end; cpu_architecture_ptr++) {
const uint32_t digit = (*cpu_architecture_ptr) - '0';
/* Verify that CPU architecture is a decimal number */
if (digit >= 10) {
break;
}
architecture = architecture * 10 + digit;
}
if (cpu_architecture_ptr == cpu_architecture_start) {
cpuinfo_log_warning("CPU architecture %.*s in /proc/cpuinfo is ignored due to non-digit at the beginning of the string",
(int) cpu_architecture_length, cpu_architecture_start);
} else {
if (architecture != 0) {
processor->architecture_version = architecture;
processor->flags |= CPUINFO_ARM_LINUX_VALID_ARCHITECTURE | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
for (; cpu_architecture_ptr != cpu_architecture_end; cpu_architecture_ptr++) {
const char feature = *cpu_architecture_ptr;
switch (feature) {
#if CPUINFO_ARCH_ARM
case 'T':
processor->architecture_flags |= CPUINFO_ARM_LINUX_ARCH_T;
break;
case 'E':
processor->architecture_flags |= CPUINFO_ARM_LINUX_ARCH_E;
break;
case 'J':
processor->architecture_flags |= CPUINFO_ARM_LINUX_ARCH_J;
break;
#endif /* CPUINFO_ARCH_ARM */
case ' ':
case '\t':
/* Ignore whitespace at the end */
break;
default:
cpuinfo_log_warning("skipped unknown architectural feature '%c' for ARMv%"PRIu32,
feature, architecture);
break;
}
}
} else {
cpuinfo_log_warning("CPU architecture %.*s in /proc/cpuinfo is ignored due to invalid value (0)",
(int) cpu_architecture_length, cpu_architecture_start);
}
}
uint32_t midr_architecture = UINT32_C(0xF);
#if CPUINFO_ARCH_ARM
switch (processor->architecture_version) {
case 6:
midr_architecture = UINT32_C(0x7); /* ARMv6 */
break;
case 5:
if ((processor->architecture_flags & CPUINFO_ARM_LINUX_ARCH_TEJ) == CPUINFO_ARM_LINUX_ARCH_TEJ) {
midr_architecture = UINT32_C(0x6); /* ARMv5TEJ */
} else if ((processor->architecture_flags & CPUINFO_ARM_LINUX_ARCH_TE) == CPUINFO_ARM_LINUX_ARCH_TE) {
midr_architecture = UINT32_C(0x5); /* ARMv5TE */
} else {
midr_architecture = UINT32_C(0x4); /* ARMv5T */
}
break;
}
#endif
processor->midr = midr_set_architecture(processor->midr, midr_architecture);
}
static void parse_cpu_part(
const char* cpu_part_start,
const char* cpu_part_end,
struct cpuinfo_arm_linux_processor processor[restrict static 1])
{
const size_t cpu_part_length = (size_t) (cpu_part_end - cpu_part_start);
/*
* CPU part should contain hex prefix (0x) and one to three hex digits.
* I have never seen less than three digits as a value of this field,
* but I don't think it is impossible to see such values in future.
* Value can not contain more than three hex digits since
* Main ID Register (MIDR) assigns only a 12-bit value for CPU part.
*/
if (cpu_part_length < 3 || cpu_part_length > 5) {
cpuinfo_log_warning("CPU part %.*s in /proc/cpuinfo is ignored due to unexpected length (%zu)",
(int) cpu_part_length, cpu_part_start, cpu_part_length);
return;
}
/* Verify the presence of hex prefix */
if (cpu_part_start[0] != '0' || cpu_part_start[1] != 'x') {
cpuinfo_log_warning("CPU part %.*s in /proc/cpuinfo is ignored due to lack of 0x prefix",
(int) cpu_part_length, cpu_part_start);
return;
}
/* Verify that characters after hex prefix are hexadecimal digits and decode them */
uint32_t cpu_part = 0;
for (const char* digit_ptr = cpu_part_start + 2; digit_ptr != cpu_part_end; digit_ptr++) {
const char digit_char = *digit_ptr;
uint32_t digit;
if (digit_char >= '0' && digit_char <= '9') {
digit = digit_char - '0';
} else if ((uint32_t) (digit_char - 'A') < 6) {
digit = 10 + (digit_char - 'A');
} else if ((uint32_t) (digit_char - 'a') < 6) {
digit = 10 + (digit_char - 'a');
} else {
cpuinfo_log_warning("CPU part %.*s in /proc/cpuinfo is ignored due to unexpected non-hex character %c at offset %zu",
(int) cpu_part_length, cpu_part_start, digit_char, (size_t) (digit_ptr - cpu_part_start));
return;
}
cpu_part = cpu_part * 16 + digit;
}
processor->midr = midr_set_part(processor->midr, cpu_part);
processor->flags |= CPUINFO_ARM_LINUX_VALID_PART | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
}
static void parse_cpu_implementer(
const char* cpu_implementer_start,
const char* cpu_implementer_end,
struct cpuinfo_arm_linux_processor processor[restrict static 1])
{
const size_t cpu_implementer_length = cpu_implementer_end - cpu_implementer_start;
/*
* Value should contain hex prefix (0x) and one or two hex digits.
* I have never seen single hex digit as a value of this field,
* but I don't think it is impossible in future.
* Value can not contain more than two hex digits since
* Main ID Register (MIDR) assigns only an 8-bit value for CPU implementer.
*/
switch (cpu_implementer_length) {
case 3:
case 4:
break;
default:
cpuinfo_log_warning("CPU implementer %.*s in /proc/cpuinfo is ignored due to unexpected length (%zu)",
(int) cpu_implementer_length, cpu_implementer_start, cpu_implementer_length);
return;
}
/* Verify the presence of hex prefix */
if (cpu_implementer_start[0] != '0' || cpu_implementer_start[1] != 'x') {
cpuinfo_log_warning("CPU implementer %.*s in /proc/cpuinfo is ignored due to lack of 0x prefix",
(int) cpu_implementer_length, cpu_implementer_start);
return;
}
/* Verify that characters after hex prefix are hexadecimal digits and decode them */
uint32_t cpu_implementer = 0;
for (const char* digit_ptr = cpu_implementer_start + 2; digit_ptr != cpu_implementer_end; digit_ptr++) {
const char digit_char = *digit_ptr;
uint32_t digit;
if (digit_char >= '0' && digit_char <= '9') {
digit = digit_char - '0';
} else if ((uint32_t) (digit_char - 'A') < 6) {
digit = 10 + (digit_char - 'A');
} else if ((uint32_t) (digit_char - 'a') < 6) {
digit = 10 + (digit_char - 'a');
} else {
cpuinfo_log_warning("CPU implementer %.*s in /proc/cpuinfo is ignored due to unexpected non-hex character '%c' at offset %zu",
(int) cpu_implementer_length, cpu_implementer_start, digit_char, (size_t) (digit_ptr - cpu_implementer_start));
return;
}
cpu_implementer = cpu_implementer * 16 + digit;
}
processor->midr = midr_set_implementer(processor->midr, cpu_implementer);
processor->flags |= CPUINFO_ARM_LINUX_VALID_IMPLEMENTER | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
}
static void parse_cpu_variant(
const char* cpu_variant_start,
const char* cpu_variant_end,
struct cpuinfo_arm_linux_processor processor[restrict static 1])
{
const size_t cpu_variant_length = cpu_variant_end - cpu_variant_start;
/*
* Value should contain hex prefix (0x) and one hex digit.
* Value can not contain more than one hex digits since
* Main ID Register (MIDR) assigns only a 4-bit value for CPU variant.
*/
if (cpu_variant_length != 3) {
cpuinfo_log_warning("CPU variant %.*s in /proc/cpuinfo is ignored due to unexpected length (%zu)",
(int) cpu_variant_length, cpu_variant_start, cpu_variant_length);
return;
}
/* Skip if there is no hex prefix (0x) */
if (cpu_variant_start[0] != '0' || cpu_variant_start[1] != 'x') {
cpuinfo_log_warning("CPU variant %.*s in /proc/cpuinfo is ignored due to lack of 0x prefix",
(int) cpu_variant_length, cpu_variant_start);
return;
}
/* Check if the value after hex prefix is indeed a hex digit and decode it. */
const char digit_char = cpu_variant_start[2];
uint32_t cpu_variant;
if ((uint32_t) (digit_char - '0') < 10) {
cpu_variant = (uint32_t) (digit_char - '0');
} else if ((uint32_t) (digit_char - 'A') < 6) {
cpu_variant = 10 + (uint32_t) (digit_char - 'A');
} else if ((uint32_t) (digit_char - 'a') < 6) {
cpu_variant = 10 + (uint32_t) (digit_char - 'a');
} else {
cpuinfo_log_warning("CPU variant %.*s in /proc/cpuinfo is ignored due to unexpected non-hex character '%c'",
(int) cpu_variant_length, cpu_variant_start, digit_char);
return;
}
processor->midr = midr_set_variant(processor->midr, cpu_variant);
processor->flags |= CPUINFO_ARM_LINUX_VALID_VARIANT | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
}
static void parse_cpu_revision(
const char* cpu_revision_start,
const char* cpu_revision_end,
struct cpuinfo_arm_linux_processor processor[restrict static 1])
{
uint32_t cpu_revision = 0;
for (const char* digit_ptr = cpu_revision_start; digit_ptr != cpu_revision_end; digit_ptr++) {
const uint32_t digit = (uint32_t) (*digit_ptr - '0');
/* Verify that the character in CPU revision is a decimal digit */
if (digit >= 10) {
cpuinfo_log_warning("CPU revision %.*s in /proc/cpuinfo is ignored due to unexpected non-digit character '%c' at offset %zu",
(int) (cpu_revision_end - cpu_revision_start), cpu_revision_start,
*digit_ptr, (size_t) (digit_ptr - cpu_revision_start));
return;
}
cpu_revision = cpu_revision * 10 + digit;
}
processor->midr = midr_set_revision(processor->midr, cpu_revision);
processor->flags |= CPUINFO_ARM_LINUX_VALID_REVISION | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
}
#if CPUINFO_ARCH_ARM
/*
* Decode one of the cache-related numbers reported by Linux kernel
* for pre-ARMv7 architecture.
* An example cache-related information in /proc/cpuinfo:
*
* I size : 32768
* I assoc : 4
* I line length : 32
* I sets : 256
* D size : 16384
* D assoc : 4
* D line length : 32
* D sets : 128
*
*/
static void parse_cache_number(
const char* number_start,
const char* number_end,
const char* number_name,
uint32_t number_ptr[restrict static 1],
uint32_t flags[restrict static 1],
uint32_t number_mask)
{
uint32_t number = 0;
for (const char* digit_ptr = number_start; digit_ptr != number_end; digit_ptr++) {
const uint32_t digit = *digit_ptr - '0';
if (digit >= 10) {
cpuinfo_log_warning("%s %.*s in /proc/cpuinfo is ignored due to unexpected non-digit character '%c' at offset %zu",
number_name, (int) (number_end - number_start), number_start,
*digit_ptr, (size_t) (digit_ptr - number_start));
return;
}
number = number * 10 + digit;
}
if (number == 0) {
cpuinfo_log_warning("%s %.*s in /proc/cpuinfo is ignored due to invalid value of zero reported by the kernel",
number_name, (int) (number_end - number_start), number_start);
}
/* If the number specifies a cache line size, verify that is a reasonable power of 2 */
if (number_mask & CPUINFO_ARM_LINUX_VALID_CACHE_LINE) {
switch (number) {
case 16:
case 32:
case 64:
case 128:
break;
default:
cpuinfo_log_warning("invalid %s %.*s is ignored: a value of 16, 32, 64, or 128 expected",
number_name, (int) (number_end - number_start), number_start);
}
}
*number_ptr = number;
*flags |= number_mask | CPUINFO_ARM_LINUX_VALID_PROCESSOR;
}
#endif /* CPUINFO_ARCH_ARM */
struct proc_cpuinfo_parser_state {
char* hardware;
uint32_t processor_index;
uint32_t max_processors_count;
struct cpuinfo_arm_linux_processor* processors;
struct cpuinfo_arm_linux_processor dummy_processor;
};
/*
* Decode a single line of /proc/cpuinfo information.
* Lines have format <words-with-spaces>[ ]*:[ ]<space-separated words>
* An example of /proc/cpuinfo (from Pandaboard-ES):
*
* Processor : ARMv7 Processor rev 10 (v7l)
* processor : 0
* BogoMIPS : 1392.74
*
* processor : 1
* BogoMIPS : 1363.33
*
* Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
* CPU implementer : 0x41
* CPU architecture: 7
* CPU variant : 0x2
* CPU part : 0xc09
* CPU revision : 10
*
* Hardware : OMAP4 Panda board
* Revision : 0020
* Serial : 0000000000000000
*/
static bool parse_line(
const char* line_start,
const char* line_end,
struct proc_cpuinfo_parser_state state[restrict static 1],
uint64_t line_number)
{
/* Empty line. Skip. */
if (line_start == line_end) {
return true;
}
/* Search for ':' on the line. */
const char* separator = line_start;
for (; separator != line_end; separator++) {
if (*separator == ':') {
break;
}
}
/* Skip line if no ':' separator was found. */
if (separator == line_end) {
cpuinfo_log_info("Line %.*s in /proc/cpuinfo is ignored: key/value separator ':' not found",
(int) (line_end - line_start), line_start);
return true;
}
/* Skip trailing spaces in key part. */
const char* key_end = separator;
for (; key_end != line_start; key_end--) {
if (key_end[-1] != ' ' && key_end[-1] != '\t') {
break;
}
}
/* Skip line if key contains nothing but spaces. */
if (key_end == line_start) {
cpuinfo_log_info("Line %.*s in /proc/cpuinfo is ignored: key contains only spaces",
(int) (line_end - line_start), line_start);
return true;
}
/* Skip leading spaces in value part. */
const char* value_start = separator + 1;
for (; value_start != line_end; value_start++) {
if (*value_start != ' ') {
break;
}
}
/* Value part contains nothing but spaces. Skip line. */
if (value_start == line_end) {
cpuinfo_log_info("Line %.*s in /proc/cpuinfo is ignored: value contains only spaces",
(int) (line_end - line_start), line_start);
return true;
}
/* Skip trailing spaces in value part (if any) */
const char* value_end = line_end;
for (; value_end != value_start; value_end--) {
if (value_end[-1] != ' ') {
break;
}
}
const uint32_t processor_index = state->processor_index;
const uint32_t max_processors_count = state->max_processors_count;
struct cpuinfo_arm_linux_processor* processors = state->processors;
struct cpuinfo_arm_linux_processor* processor = &state->dummy_processor;
if (processor_index < max_processors_count) {
processor = &processors[processor_index];
}
const size_t key_length = key_end - line_start;
switch (key_length) {
case 6:
if (memcmp(line_start, "Serial", key_length) == 0) {
/* Usually contains just zeros, useless */
#if CPUINFO_ARCH_ARM
} else if (memcmp(line_start, "I size", key_length) == 0) {
parse_cache_number(value_start, value_end,
"instruction cache size", &processor->proc_cpuinfo_cache.i_size,
&processor->flags, CPUINFO_ARM_LINUX_VALID_ICACHE_SIZE);
} else if (memcmp(line_start, "I sets", key_length) == 0) {
parse_cache_number(value_start, value_end,
"instruction cache sets", &processor->proc_cpuinfo_cache.i_sets,
&processor->flags, CPUINFO_ARM_LINUX_VALID_ICACHE_SETS);
} else if (memcmp(line_start, "D size", key_length) == 0) {
parse_cache_number(value_start, value_end,
"data cache size", &processor->proc_cpuinfo_cache.d_size,
&processor->flags, CPUINFO_ARM_LINUX_VALID_DCACHE_SIZE);
} else if (memcmp(line_start, "D sets", key_length) == 0) {
parse_cache_number(value_start, value_end,
"data cache sets", &processor->proc_cpuinfo_cache.d_sets,
&processor->flags, CPUINFO_ARM_LINUX_VALID_DCACHE_SETS);
#endif /* CPUINFO_ARCH_ARM */
} else {
goto unknown;
}
break;
#if CPUINFO_ARCH_ARM
case 7:
if (memcmp(line_start, "I assoc", key_length) == 0) {
parse_cache_number(value_start, value_end,
"instruction cache associativity", &processor->proc_cpuinfo_cache.i_assoc,
&processor->flags, CPUINFO_ARM_LINUX_VALID_ICACHE_WAYS);
} else if (memcmp(line_start, "D assoc", key_length) == 0) {
parse_cache_number(value_start, value_end,
"data cache associativity", &processor->proc_cpuinfo_cache.d_assoc,
&processor->flags, CPUINFO_ARM_LINUX_VALID_DCACHE_WAYS);
} else {
goto unknown;
}
break;
#endif /* CPUINFO_ARCH_ARM */
case 8:
if (memcmp(line_start, "CPU part", key_length) == 0) {
parse_cpu_part(value_start, value_end, processor);
} else if (memcmp(line_start, "Features", key_length) == 0) {
parse_features(value_start, value_end, processor);
} else if (memcmp(line_start, "BogoMIPS", key_length) == 0) {
/* BogoMIPS is useless, don't parse */
} else if (memcmp(line_start, "Hardware", key_length) == 0) {
size_t value_length = value_end - value_start;
if (value_length > CPUINFO_HARDWARE_VALUE_MAX) {
cpuinfo_log_info(
"length of Hardware value \"%.*s\" in /proc/cpuinfo exceeds limit (%d): truncating to the limit",
(int) value_length, value_start, CPUINFO_HARDWARE_VALUE_MAX);
value_length = CPUINFO_HARDWARE_VALUE_MAX;
} else {
state->hardware[value_length] = '\0';
}
memcpy(state->hardware, value_start, value_length);
cpuinfo_log_debug("parsed /proc/cpuinfo Hardware = \"%.*s\"", (int) value_length, value_start);
} else if (memcmp(line_start, "Revision", key_length) == 0) {
/* Board revision, no use for now */
} else {
goto unknown;
}
break;
case 9:
if (memcmp(line_start, "processor", key_length) == 0) {
const uint32_t new_processor_index = parse_processor_number(value_start, value_end);
if (new_processor_index < processor_index) {
/* Strange: decreasing processor number */
cpuinfo_log_warning(
"unexpectedly low processor number %"PRIu32" following processor %"PRIu32" in /proc/cpuinfo",
new_processor_index, processor_index);
} else if (new_processor_index > processor_index + 1) {
/* Strange, but common: skipped processor $(processor_index + 1) */
cpuinfo_log_info(
"unexpectedly high processor number %"PRIu32" following processor %"PRIu32" in /proc/cpuinfo",
new_processor_index, processor_index);
}
if (new_processor_index < max_processors_count) {
/* Record that the processor was mentioned in /proc/cpuinfo */
processors[new_processor_index].flags |= CPUINFO_ARM_LINUX_VALID_PROCESSOR;
} else {
/* Log and ignore processor */
cpuinfo_log_warning("processor %"PRIu32" in /proc/cpuinfo is ignored: index exceeds system limit %"PRIu32,
new_processor_index, max_processors_count - 1);
}
state->processor_index = new_processor_index;
return true;
} else if (memcmp(line_start, "Processor", key_length) == 0) {
/* TODO: parse to fix misreported architecture, similar to Android's cpufeatures */
} else {
goto unknown;
}
break;
case 11:
if (memcmp(line_start, "CPU variant", key_length) == 0) {
parse_cpu_variant(value_start, value_end, processor);
} else {
goto unknown;
}
break;
case 12:
if (memcmp(line_start, "CPU revision", key_length) == 0) {
parse_cpu_revision(value_start, value_end, processor);
} else {
goto unknown;
}
break;
#if CPUINFO_ARCH_ARM
case 13:
if (memcmp(line_start, "I line length", key_length) == 0) {
parse_cache_number(value_start, value_end,
"instruction cache line size", &processor->proc_cpuinfo_cache.i_line_length,
&processor->flags, CPUINFO_ARM_LINUX_VALID_ICACHE_LINE);
} else if (memcmp(line_start, "D line length", key_length) == 0) {
parse_cache_number(value_start, value_end,
"data cache line size", &processor->proc_cpuinfo_cache.d_line_length,
&processor->flags, CPUINFO_ARM_LINUX_VALID_DCACHE_LINE);
} else {
goto unknown;
}
break;
#endif /* CPUINFO_ARCH_ARM */
case 15:
if (memcmp(line_start, "CPU implementer", key_length) == 0) {
parse_cpu_implementer(value_start, value_end, processor);
} else if (memcmp(line_start, "CPU implementor", key_length) == 0) {
parse_cpu_implementer(value_start, value_end, processor);
} else {
goto unknown;
}
break;
case 16:
if (memcmp(line_start, "CPU architecture", key_length) == 0) {
parse_cpu_architecture(value_start, value_end, processor);
} else {
goto unknown;
}
break;
default:
unknown:
cpuinfo_log_debug("unknown /proc/cpuinfo key: %.*s", (int) key_length, line_start);
}
return true;
}
bool cpuinfo_arm_linux_parse_proc_cpuinfo(
char hardware[restrict static CPUINFO_HARDWARE_VALUE_MAX],
uint32_t max_processors_count,
struct cpuinfo_arm_linux_processor processors[restrict static max_processors_count])
{
struct proc_cpuinfo_parser_state state = {
.hardware = hardware,
.processor_index = 0,
.max_processors_count = max_processors_count,
.processors = processors,
};
return cpuinfo_linux_parse_multiline_file("/proc/cpuinfo", BUFFER_SIZE,
(cpuinfo_line_callback) parse_line, &state);
}