| [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0x100 |
| [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuset |
| [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu |
| [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct |
| [ 0.000000] [0: swapper: 0] Linux version 4.4.13-12719828 (dpi@SWHE7718) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Dec 20 17:33:46 KST 2017 |
| [ 0.000000] [0: swapper: 0] Boot CPU: AArch64 Processor [410fd034] |
| [ 0.000000] [0: swapper: 0] [ECT] Address 90000000, Size 19000 |
| [ 0.000000] [0: swapper: 0] [MUIC] set_afc_mode: afc_mode is 0x00 |
| [ 0.000000] [0: swapper: 0] charging_mode() : 0x0(0) |
| [ 0.000000] [0: swapper: 0] dsim: get_lcd_type: lcdtype: 810543 |
| [ 0.000000] [0: swapper: 0] val = 49 |
| [ 0.000000] [0: swapper: 0] Security Boot Mode |
| [ 0.000000] [0: swapper: 0] CMA memory[1]: crypto:0x1800000 |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node crypto, compatible id exynos8890-ion,crypto |
| [ 0.000000] [0: swapper: 0] CMA memory[3]: video_stream:0x4800000 |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node video_stream, compatible id exynos8890-ion,vstream |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node btabox_rmem, compatible id exynos,btabox_rmem |
| [ 0.000000] [0: swapper: 0] sec_debug_magic_setup: Reserved Mem(0x80000000, 0x1000) - Success |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node sec_debug_magic, compatible id exynos,sec_debug_magic |
| [ 0.000000] [0: swapper: 0] exynos_seclog_reserved_mem_setup: Reserved memory for seclog: addr=c0000000, size=80000 |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node seclog_mem, compatible id exynos,seclog |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node wifibt_if, compatible id exynos,wifibt_if |
| [ 0.000000] [0: swapper: 0] abox_rmem_setup: base=0x00000000e9400000, size=0x0000000000400000 |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node abox_rmem@0xE9400000, compatible id exynos,abox_rmem |
| [ 0.000000] [0: swapper: 0] modem_if_reserved_mem_setup: memory reserved: paddr=4114612224, t_size=142606336 |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node modem_if, compatible id exynos,modem_if |
| [ 0.000000] [0: swapper: 0] modem_if_reserved_cplog_setup: cplog memory reserved: paddr=4257218560, t_size=33554432 |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node cp_ram_logging, compatible id exynos,cp_ram_logging |
| [ 0.000000] [0: swapper: 0] Reserved memory: initialized node gnss_if, compatible id exynos,gnss_if |
| [ 0.000000] [0: swapper: 0] cma: Reserved 20 MiB at 0x00000008fd000000 |
| [ 0.000000] [0: swapper: 0] map_mem: UH is allocated extra memory |
| [ 0.000000] [0: swapper: 0] On node 0 totalpages: 1038848 |
| [ 0.000000] [0: swapper: 0] Normal zone: 16232 pages used for memmap |
| [ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved |
| [ 0.000000] [0: swapper: 0] Normal zone: 1038848 pages, LIFO batch:31 |
| [ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT. |
| [ 0.000000] [0: swapper: 0] psci: Using PSCI v0.1 Function IDs from DT |
| [ 0.000000] [0: swapper: 0] WARNING: x1-x3 nonzero in violation of boot protocol: |
| [ 0.000000] [0: swapper: 0] x1: 0000000080000000 |
| [ 0.000000] [0: swapper: 0] x2: 00000000000f4000 |
| [ 0.000000] [0: swapper: 0] x3: 00000000800f4000 |
| [ 0.000000] [0: swapper: 0] This indicates a broken bootloader or old kernel |
| [ 0.000000] [0: swapper: 0] PERCPU: Embedded 15 pages/cpu @ffffffc87cea9000 s30464 r0 d30976 u61440 |
| [ 0.000000] [0: swapper: 0] pcpu-alloc: s30464 r0 d30976 u61440 alloc=15*4096 |
| [ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 |
| [ 0.000000] [0: swapper: 0] Detected VIPT I-cache on CPU0 |
| [ 0.000000] [0: swapper: 0] CPU features: enabling workaround for ARM erratum 845719 |
| [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022616 |
| [ 0.000000] [0: swapper: 0] Kernel command line: console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 DynSysLog=1 androidboot.debug_level=0x4f4c androidboot.dram_info=01,06,01,4G androidboot.ap_serial=0x0774EF5052E4 sec_debug.chipidfail_cnt=0 sec_debug.lpitimeout_cnt=0 sec_debug.cache_err_cnt=0 sec_debug.codediff_cnt=0 sec_debug.pcb_offset=7343872 sec_debug.smd_offset=7344896 sec_debug.lpddr4_size=4 androidboot.smsn_offset=7345920 androidboot.recovery_offset=7347968 ess_setup=0x91200000 tima_log=0x200000@0xb8000000 sec_avc_log=0x40000@0x92602000 sec_summary_log=0x300000@0x92686000 sec_debug.base=0x100000@0x92988000 auto_summary_log=0x10000@0x92a8a000 charging_mode=0x0 s3cfb.bootloaderfb=0xec000000 lcdtype=8455491 androidboot.carrierid_offset=7340608 androidboot.carrierid=XSG consoleblank=0 vmalloc=384m sec_debug.reset_reason=7 sec_reset.reset_reason=7 ehci_hcd.park=3 oops=panic pmic_info=11 ccic_info=1 cordon=5d6062b282f63b22da2761427025255c connie=SM-A530F_OPEN_EUR_6d4cdeb98<6>[ 0.000000] [0: swapper: 0] sec_debug_recovery_cause_setup, recovery_cause_offset :701f00 |
| [ 0.000000] [0: swapper: 0] exynos-snapshot: try to reserve dedicated memory : 0x91200000, 0x1400000 |
| [ 0.000000] [0: swapper: 0] exynos-snapshot: memory reserved complete : 0x91200000, 0x1400000 |
| [ 0.000000] [0: swapper: 0] sec_debug: GetLog support (mark:0xffffffc0014c78c8, klog: 0xffffffc011a00000) |
| [ 0.000000] [0: swapper: 0] tima :tima_log_setup, base:b8000000, size:200000 |
| [ 0.000000] [0: swapper: 0] sec_avc_log_setup: *sec_avc_log_ptr:1584 sec_avc_log_buf:ffffffc012602000 sec_log_size:0x40000 |
| [ 0.000000] [0: swapper: 0] sec_summary_log_setup, base:0x92686000 size:0x300000 |
| [ 0.000000] [0: swapper: 0] sec_debug_init_base_buffer, base(virt):0xffffffc012988000 size:0x100000 |
| [ 0.000000] [0: swapper: 0] sec_debug_base_setup, base(phys):0x92988000 size:0x100000 |
| [ 0.000000] [0: swapper: 0] sec_auto_summary_log_setup, base:0x92a8a000 size:0x10000 |
| [ 0.000000] [0: swapper: 0] [MUIC] set_switch_sel: switch_sel: 0x00b |
| [ 0.000000] [0: swapper: 0] [MUIC] set_ccic_info: ccic_info: 0x0001 |
| [ 0.000000] [0: swapper: 0] sec_bat_get_fg_reset, fg_reset:0 |
| [ 0.000000] [0: swapper: 0] kaslr :set_kaslr_region, base:80001000, size:1000 |
| [ 0.000000] [0: swapper: 0] mif: console_setup: board_rev : 7 |
| [ 0.000000] [0: swapper: 0] cplog_on=off, 0 |
| [ 0.000000] [0: swapper: 0] fimc-is library memory: 0xffffff80fa000000 |
| [ 0.000000] [0: swapper: 0] fimc-is heap memory: 0xffffff80fa000000 |
| [ 0.000000] [0: swapper: 0] sec_bat_get_factory_mode, factory_mode : 0 |
| [ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0500000, size:0x100000 |
| [ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0600000, size:0x40000 |
| [ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0640000, size:0x40000 |
| [ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xafe00000, size:0x700000 |
| [ 0.000000] [0: swapper: 0] uh_reserve_mem: base:0xb0808000, size:0x7f8000 |
| [ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.000000] [0: swapper: 0] Sorting __ex_table... |
| [ 0.000000] [0: swapper: 0] Memory: 3630968K/4155392K available (9788K kernel code, 1470K rwdata, 4672K rodata, 4280K init, 7122K bss, 405640K reserved, 118784K cma-reserved) |
| [ 0.000000] [0: swapper: 0] Virtual kernel memory layout: |
| [ 0.000000] [0: swapper: 0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) |
| [ 0.000000] [0: swapper: 0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) |
| [ 0.000000] [0: swapper: 0] 0xffffffbdc0000000 - 0xffffffbde2000000 ( 544 MB actual) |
| [ 0.000000] [0: swapper: 0] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) |
| [ 0.000000] [0: swapper: 0] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) |
| [ 0.000000] [0: swapper: 0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) |
| [ 0.000000] [0: swapper: 0] memory : 0xffffffc000000000 - 0xffffffc880000000 ( 34816 MB) |
| [ 0.000000] [0: swapper: 0] .init : 0xffffffc000f7b000 - 0xffffffc0013a9000 ( 4280 KB) |
| [ 0.000000] [0: swapper: 0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 |
| [ 0.000000] [0: swapper: 0] uh_init: bin 0xffffffc000f7e3b0, 0x3c300 |
| [ 0.000000] [0: swapper: 0] uh_init: BSS base = 0xffffffbf8003c110, 0x1348 |
| [ 0.000000] [0: swapper: 0] uh_init: Head Text base = 0xffffffbf80001000, 0xc0 |
| [ 0.000000] [0: swapper: 0] uh entry point: 00000000b0501000 |
| [ 0.000000] [0: swapper: 0] uh add: 00000000b0500000, size: 0x100000, status: 0 |
| [ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation. |
| [ 0.000000] [0: swapper/0: 0] Build-time adjustment of leaf fanout to 64. |
| [ 0.000000] [0: swapper/0: 0] NR_IRQS:64 nr_irqs:64 0 |
| [ 0.000000] [0: swapper/0: 0] ======================================== |
| [ 0.000000] [0: swapper/0: 0] = |
| [ 0.000000] [0: swapper/0: 0] = [ECT] current version is TEST VERSION!! |
| [ 0.000000] [0: swapper/0: 0] = Please be aware that error can be happen. |
| [ 0.000000] [0: swapper/0: 0] = [VERSION] : 002g |
| [ 0.000000] [0: swapper/0: 0] = |
| [ 0.000000] [0: swapper/0: 0] ======================================== |
| [ 0.000000] [0: swapper/0: 0] vclk initialize for cmucal |
| [ 0.000000] [0: swapper/0: 0] asv_table_version : 2 |
| [ 0.000000] [0: swapper/0: 0] big grp : 5 |
| [ 0.000000] [0: swapper/0: 0] little grp : 5 |
| [ 0.000000] [0: swapper/0: 0] g3d grp : 5 |
| [ 0.000000] [0: swapper/0: 0] mif grp : 5 |
| [ 0.000000] [0: swapper/0: 0] int grp : 5 |
| [ 0.000000] [0: swapper/0: 0] fsys grp : 5 |
| [ 0.000000] [0: swapper/0: 0] cp grp : 7 |
| [ 0.000000] [0: swapper/0: 0] PMUCAL: pmucal_cp_initialize() |
| [ 0.000000] [0: swapper/0: 0] EXYNOS7885: Clock setup completed |
| [ 0.000000] [0: swapper/0: 0] Exynos: pwm: clock setup completed |
| [ 0.000000] [0: swapper/0: 0] arch_timer_of_init: arch_timer is used only clocksource |
| [ 0.000000] [0: swapper/0: 0] Architected cp15 timer(s) running at 26.00MHz (virt). |
| [ 0.000000] [0: swapper/0: 0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5ff13d5a9, max_idle_ns: 440795202370 ns |
| [ 0.000004] [0: swapper/0: 0] sched_clock: 56 bits at 26MHz, resolution 38ns, wraps every 4398046511088ns |
| [ 0.002701] [0: swapper/0: 0] set_state_shutdown: mct_tick_stop (cpu0) |
| [ 0.003718] [0: swapper/0: 0] Enable clock for console to add reference counter |
| [ 0.003761] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 52.00 BogoMIPS (lpj=104000) |
| [ 0.003775] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301 |
| [ 0.003848] [0: swapper/0: 0] Security Framework initialized |
| [ 0.003862] [0: swapper/0: 0] SELinux: Initializing. |
| [ 0.003908] [0: swapper/0: 0] SELinux: Starting in permissive mode |
| [ 0.003949] [0: swapper/0: 0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.003968] [0: swapper/0: 0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.004691] [0: swapper/0: 0] Initializing cgroup subsys freezer |
| [ 0.004712] [0: swapper/0: 0] Initializing cgroup subsys debug |
| [ 0.006208] [0: swapper/0: 1] /cpus/cpu@100: Missing clock-frequency property |
| [ 0.006251] [0: swapper/0: 1] /cpus/cpu@101: Missing clock-frequency property |
| [ 0.006289] [0: swapper/0: 1] /cpus/cpu@102: Missing clock-frequency property |
| [ 0.006334] [0: swapper/0: 1] /cpus/cpu@103: Missing clock-frequency property |
| [ 0.006376] [0: swapper/0: 1] /cpus/cpu@200: Missing clock-frequency property |
| [ 0.006418] [0: swapper/0: 1] /cpus/cpu@201: Missing clock-frequency property |
| [ 0.006462] [0: swapper/0: 1] /cpus/cpu@0: Missing clock-frequency property |
| [ 0.006508] [0: swapper/0: 1] /cpus/cpu@1: Missing clock-frequency property |
| [ 0.006570] [0: swapper/0: 1] ASID allocator initialised with 65536 entries |
| [ 0.025415] [0: swapper/0: 1] exynos-snapshot physical / virtual memory layout: |
| [ 0.025435] [0: swapper/0: 1] log_kevents : phys:0x91200000 / virt:0xffffff80f6000000 / size:0x800000 |
| [ 0.025447] [0: swapper/0: 1] log_kernel : phys:0x91a00000 / virt:0xffffff80f6800000 / size:0x200000 |
| [ 0.025458] [0: swapper/0: 1] log_platform: phys:0x91c00000 / virt:0xffffff80f6a00000 / size:0x400000 |
| [ 0.025470] [0: swapper/0: 1] log_sfr : phys:0x92000000 / virt:0xffffff80f6e00000 / size:0x400000 |
| [ 0.025480] [0: swapper/0: 1] log_pstore : phys:0x92400000 / virt:0xffffff80f7200000 / size:0x200000 |
| [ 0.025495] [0: swapper/0: 1] sec_debug_save_last_kmsg: sec_log buffer is full |
| [ 0.042695] [0: swapper/0: 1] sec_debug_save_last_kmsg: successed |
| [ 0.043015] [0: swapper/0: 1] success to regsiter sfr-dump-cmu-peris |
| [ 0.043035] [0: swapper/0: 1] success to regsiter sfr-dump-cmu-dispaud |
| [ 0.043051] [0: swapper/0: 1] exynos-snapshot: enabled |
| [ 0.043939] [0: swapper/0: 1] exynos-snapshot: logger buffer alloc address: 0xffffff800000a000 |
| [ 0.044153] [0: swapper/0: 1] sec_debug: set magic code (0x66262564) |
| [ 0.058898] [1: swapper/1: 0] Detected VIPT I-cache on CPU1 |
| [ 0.058952] [1: swapper/1: 0] set_state_shutdown: mct_tick_stop (cpu1) |
| [ 0.058977] [1: swapper/1: 0] CPU1: Booted secondary processor [410fd034] |
| [ 0.070881] [2: swapper/2: 0] Detected VIPT I-cache on CPU2 |
| [ 0.070924] [2: swapper/2: 0] set_state_shutdown: mct_tick_stop (cpu2) |
| [ 0.070948] [2: swapper/2: 0] CPU2: Booted secondary processor [410fd034] |
| [ 0.082884] [3: swapper/3: 0] Detected VIPT I-cache on CPU3 |
| [ 0.082931] [3: swapper/3: 0] set_state_shutdown: mct_tick_stop (cpu3) |
| [ 0.082952] [3: swapper/3: 0] CPU3: Booted secondary processor [410fd034] |
| [ 0.094957] [4: swapper/4: 0] Detected VIPT I-cache on CPU4 |
| [ 0.095333] [4: swapper/4: 0] set_state_shutdown: mct_tick_stop (cpu4) |
| [ 0.095360] [4: swapper/4: 0] CPU4: Booted secondary processor [410fd034] |
| [ 0.106872] [5: swapper/5: 0] Detected VIPT I-cache on CPU5 |
| [ 0.106914] [5: swapper/5: 0] set_state_shutdown: mct_tick_stop (cpu5) |
| [ 0.106937] [5: swapper/5: 0] CPU5: Booted secondary processor [410fd034] |
| [ 0.118941] [6: swapper/6: 0] Detected VIPT I-cache on CPU6 |
| [ 0.119132] [6: swapper/6: 0] set_state_shutdown: mct_tick_stop (cpu6) |
| [ 0.119149] [6: swapper/6: 0] CPU6: Booted secondary processor [410fd092] |
| [ 0.119755] [7: swapper/7: 0] Detected VIPT I-cache on CPU7 |
| [ 0.119782] [7: swapper/7: 0] set_state_shutdown: mct_tick_stop (cpu7) |
| [ 0.119797] [7: swapper/7: 0] CPU7: Booted secondary processor [410fd092] |
| [ 0.119887] [0: swapper/0: 1] Brought up 8 CPUs |
| [ 0.120020] [0: swapper/0: 1] SMP: Total of 8 processors activated. |
| [ 0.120044] [0: swapper/0: 1] CPU: All CPU(s) started at EL1 |
| [ 0.120099] [0: migration/0: 10] alternatives: patching kernel code |
| [ 0.120951] [0: swapper/0: 1] devtmpfs: initialized |
| [ 0.142330] [7: swapper/0: 1] hmp_boostpulse_endtime is set(40136000) |
| [ 0.143619] [7: swapper/0: 1] sched: registering cpufreq notifiers for scale-invariant loads |
| [ 0.143729] [7: swapper/0: 1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.145325] [7: swapper/0: 1] pinctrl core: initialized pinctrl subsystem |
| [ 0.157819] [7: swapper/0: 1] exynos_protect_kernel_text: Kernel text start VA(0xffffffc0000f4000), PA(0x800f4000) |
| [ 0.157835] [7: swapper/0: 1] exynos_protect_kernel_text: Kernel text end VA(0xffffffc000f14000), PA(0x80f14000) |
| [ 0.157868] [7: swapper/0: 1] exynos_protect_kernel_text: Success to set Kernel code as read-only |
| [ 0.158469] [7: swapper/0: 1] sec_debug: GetLog support (ver:0xffffffc0014c7858) |
| [ 0.158727] [7: swapper/0: 1] NET: Registered protocol family 16 |
| [ 0.171852] [7: swapper/0: 1] cpuidle: using governor ladder |
| [ 0.183817] [7: swapper/0: 1] cpuidle: using governor menu |
| [ 0.183834] [7: swapper/0: 1] [FD_DETECT] sec_fd_detect_init |
| [ 0.185037] [7: swapper/0: 1] vdso: 2 pages (1 code @ ffffffc0013c5000, 1 data @ ffffffc0013c4000) |
| [ 0.185066] [7: swapper/0: 1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. |
| [ 0.186053] [7: swapper/0: 1] DMA: preallocated 2048 KiB pool for atomic allocations |
| [ 0.186547] [7: swapper/0: 1] exynos_set_seh_address: send smc call with SMC_CMD_SET_SEH_ADDRESS. |
| [ 0.186575] [7: swapper/0: 1] exynos_set_seh_address: did not set the seh address to el3 monitor. ret = 0xffffffff. |
| [ 0.186597] [7: swapper/0: 1] exynos_set_debug_mem: alloc kmem for smc_dbg virt: 0xffffffc874f56000 phys: 0x00000008f4f56000 size: 4096. |
| [ 0.186611] [7: swapper/0: 1] exynos_set_debug_mem: Can not set the address to el3 monitor. ret = 0xffffffff. free the kmem |
| [ 0.186863] [7: swapper/0: 1] boot_lock_time property is omitted! |
| [ 0.186986] [7: swapper/0: 1] IOVMM: Created debugfs entry at debugfs/iovmm |
| [ 0.187001] [7: swapper/0: 1] IOMMU: Created debugfs entry at debugfs/iommu |
| [ 0.187136] [7: swapper/0: 1] BTS: driver is initialized |
| [ 0.187570] [7: swapper/0: 1] DMA ranges for domain iommu-domain_disp. [0x10000000..0xffff0000] |
| [ 0.187670] [7: swapper/0: 1] Added client.1[dpp] into domain iommu-domain_disp |
| [ 0.187700] [7: swapper/0: 1] Added client.2[dpp] into domain iommu-domain_disp |
| [ 0.187724] [7: swapper/0: 1] Added client.3[dpp] into domain iommu-domain_disp |
| [ 0.187748] [7: swapper/0: 1] Added client.4[dpp] into domain iommu-domain_disp |
| [ 0.187768] [7: swapper/0: 1] DMA ranges for domain iommu-domain_aud. [0x10000000..0xd0000000] |
| [ 0.187877] [7: swapper/0: 1] Added client.1[abox] into domain iommu-domain_aud |
| [ 0.187905] [7: swapper/0: 1] DMA ranges for domain iommu-domain_is. [0x10000000..0xd0000000] |
| [ 0.187991] [7: swapper/0: 1] Added client.1[fimc_is] into domain iommu-domain_is |
| [ 0.188025] [7: swapper/0: 1] Added client.2[fimc_is_sensor] into domain iommu-domain_is |
| [ 0.188053] [7: swapper/0: 1] Added client.3[fimc_is_sensor] into domain iommu-domain_is |
| [ 0.188081] [7: swapper/0: 1] Added client.4[fimc_is_sensor] into domain iommu-domain_is |
| [ 0.188109] [7: swapper/0: 1] Added client.5[fimc_is_sensor] into domain iommu-domain_is |
| [ 0.188137] [7: swapper/0: 1] Added client.6[gdc] into domain iommu-domain_is |
| [ 0.188152] [7: swapper/0: 1] DMA ranges for domain iommu-domain_mfcmscl. [0x10000000..0x80000000] |
| [ 0.188212] [7: swapper/0: 1] Added client.1[smfc] into domain iommu-domain_mfcmscl |
| [ 0.188239] [7: swapper/0: 1] Added client.2[scaler] into domain iommu-domain_mfcmscl |
| [ 0.188263] [7: swapper/0: 1] Added client.3[fimg2d] into domain iommu-domain_mfcmscl |
| [ 0.188286] [7: swapper/0: 1] Added client.4[mfc0] into domain iommu-domain_mfcmscl |
| [ 0.188791] [7: swapper/0: 1] exynos-sysmmu 148c0000.sysmmu: Registering secure irq 15 |
| [ 0.188852] [7: swapper/0: 1] exynos-sysmmu 148c0000.sysmmu: Secure base = 0x148d0000 |
| [ 0.188879] [7: swapper/0: 1] exynos-sysmmu 148c0000.sysmmu: is probed. Version 7.2.0 |
| [ 0.189125] [7: swapper/0: 1] exynos-sysmmu 14a30000.sysmmu_abox: is probed. Version 7.2.0 |
| [ 0.189398] [7: swapper/0: 1] exynos-sysmmu 14540000.sysmmu: Registering secure irq 18 |
| [ 0.189434] [7: swapper/0: 1] exynos-sysmmu 14540000.sysmmu: Secure base = 0x14530000 |
| [ 0.189473] [7: swapper/0: 1] exynos-sysmmu 14540000.sysmmu: is probed. Version 7.2.0 |
| [ 0.189732] [7: swapper/0: 1] exynos-sysmmu 14730000.sysmmu: Registering secure irq 20 |
| [ 0.189764] [7: swapper/0: 1] exynos-sysmmu 14730000.sysmmu: Secure base = 0x14740000 |
| [ 0.189785] [7: swapper/0: 1] exynos-sysmmu 14730000.sysmmu: is probed. Version 7.2.0 |
| [ 0.190038] [7: swapper/0: 1] exynos-sysmmu 14760000.sysmmu: Registering secure irq 22 |
| [ 0.190072] [7: swapper/0: 1] exynos-sysmmu 14760000.sysmmu: Secure base = 0x14770000 |
| [ 0.190093] [7: swapper/0: 1] exynos-sysmmu 14760000.sysmmu: is probed. Version 7.2.0 |
| [ 0.190350] [7: swapper/0: 1] exynos-sysmmu 12c50000.sysmmu: Registering secure irq 24 |
| [ 0.190382] [7: swapper/0: 1] exynos-sysmmu 12c50000.sysmmu: Secure base = 0x12c60000 |
| [ 0.190409] [7: swapper/0: 1] exynos-sysmmu 12c50000.sysmmu: is probed. Version 7.2.0 |
| [ 0.195467] [7: swapper/0: 1] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS7885] CPU_REV[0x1] Detected |
| [ 0.198499] [7: swapper/0: 1] usi 10032000.usi: usi_probe() mode:4 |
| [ 0.198615] [7: swapper/0: 1] usi 10032004.usi: usi_probe() mode:4 |
| [ 0.198722] [7: swapper/0: 1] usi 10032008.usi: usi_probe() mode:4 |
| [ 0.201491] [7: swapper/0: 1] platform 14851000.dpp: is owner of 148c0000.sysmmu |
| [ 0.201676] [7: swapper/0: 1] platform 14852000.dpp: is owner of 148c0000.sysmmu |
| [ 0.201851] [7: swapper/0: 1] platform 14853000.dpp: is owner of 148c0000.sysmmu |
| [ 0.202041] [7: swapper/0: 1] platform 14854000.dpp: is owner of 148c0000.sysmmu |
| [ 0.202970] [7: swapper/0: 1] platform 14a50000.abox: is owner of 14a30000.sysmmu_abox |
| [ 0.203488] [7: swapper/0: 1] platform 12c00000.smfc: is owner of 12c50000.sysmmu |
| [ 0.203670] [7: swapper/0: 1] platform 12c10000.scaler: is owner of 12c50000.sysmmu |
| [ 0.203872] [7: swapper/0: 1] platform 12c20000.fimg2d: is owner of 12c50000.sysmmu |
| [ 0.204309] [7: swapper/0: 1] platform 12c30000.mfc0: is owner of 12c50000.sysmmu |
| [ 0.204554] [7: swapper/0: 1] exynos-acpm-ipc 11c40000.acpm_ipc: acpm_ipc probe |
| [ 0.204717] [7: swapper/0: 1] [ACPM] acpm framework SRAM dump to dram base: 0x8f4a60000 |
| [ 0.207295] [7: swapper/0: 1] platform 14440000.fimc_is: is owner of 14730000.sysmmu |
| [ 0.207347] [7: swapper/0: 1] platform 14440000.fimc_is: is owner of 14760000.sysmmu |
| [ 0.207403] [7: swapper/0: 1] platform 14440000.fimc_is: is owner of 14540000.sysmmu |
| [ 0.207922] [7: swapper/0: 1] platform 14410000.fimc_is_sensor: is owner of 14540000.sysmmu |
| [ 0.208116] [7: swapper/0: 1] platform 14400000.fimc_is_sensor: is owner of 14540000.sysmmu |
| [ 0.208295] [7: swapper/0: 1] platform 14420000.fimc_is_sensor: is owner of 14540000.sysmmu |
| [ 0.208468] [7: swapper/0: 1] platform 14430000.fimc_is_sensor: is owner of 14540000.sysmmu |
| [ 0.208642] [7: swapper/0: 1] platform 14630000.gdc: is owner of 14730000.sysmmu |
| [ 0.211123] [7: swapper/0: 1] exynos-acpm 11c88000.acpm: acpm probe |
| [ 0.248750] [7: swapper/0: 1] EXYNOS-PD: exynos_pd_dt_parse: pd-dispaud read need_smc 0x148f0000 successfully.! |
| [ 0.249364] [7: swapper/0: 1] EXYNOS-PD: pd-isp has a new child pd-cam. |
| [ 0.249584] [7: swapper/0: 1] EXYNOS-PD: PM Domain Initialize |
| [ 0.249695] [7: swapper/0: 1] pd-dispaud - on |
| [ 0.249713] [7: swapper/0: 1] pd-mfcmscl - on |
| [ 0.249730] [7: swapper/0: 1] pd-isp - on |
| [ 0.249746] [7: swapper/0: 1] pd-cam - on |
| [ 0.249763] [7: swapper/0: 1] pd-g3d - on |
| [ 0.250160] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250179] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250201] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250215] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250230] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250242] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250257] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250271] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: This doesn't need to send policy to ACPM |
| [ 0.250283] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 0(dm_cpu_cl0), dvfs_type: 0, available = true |
| [ 0.250295] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 1(dm_cpu_cl1), dvfs_type: 0, available = true |
| [ 0.250307] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 2(dm_mif), dvfs_type: 1, available = true |
| [ 0.250317] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 3(dm_int), dvfs_type: 1, available = true |
| [ 0.250327] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 5(dm_disp), dvfs_type: 1, available = true |
| [ 0.250336] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 6(dm_fsys), dvfs_type: 1, available = true |
| [ 0.250345] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 7(dm_aud), dvfs_type: 1, available = true |
| [ 0.250353] [7: swapper/0: 1] exynos-dm 17000000.exynos-dm: dm_type: 8(dm_cam), dvfs_type: 1, available = true |
| [ 0.250953] [7: swapper/0: 1] s2mpu08:s2mpu08_i2c_init |
| [ 0.251174] [7: swapper/0: 1] SCSI subsystem initialized |
| [ 0.251371] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: spi bus clock parent not specified, using clock at index 0 as parent |
| [ 0.251383] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: number of chip select lines not specified, assuming 1 chip select line |
| [ 0.251643] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: Not define default state. |
| [ 0.251655] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: Not use idle state. |
| [ 0.251668] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: spi clkoff-time is empty(Default: 0ms) |
| [ 0.251679] [7: swapper/0: 1] s3c64xx-spi 13900000.spi: PORT 0 fifo_lvl_mask = 0x1ff |
| [ 0.252168] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: spi bus clock parent not specified, using clock at index 0 as parent |
| [ 0.252185] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: number of chip select lines not specified, assuming 1 chip select line |
| [ 0.252392] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: Not define default state. |
| [ 0.252403] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: Not use idle state. |
| [ 0.252416] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: spi clkoff-time is empty(Default: 0ms) |
| [ 0.252431] [7: swapper/0: 1] s3c64xx-spi 13910000.spi: PORT 1 fifo_lvl_mask = 0x1ff |
| [ 0.252966] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: spi bus clock parent not specified, using clock at index 0 as parent |
| [ 0.253063] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13920000.spi in idle-ip list with err -61 |
| [ 0.253142] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: Not use idle state. |
| [ 0.253154] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: spi clkoff-time is empty(Default: 0ms) |
| [ 0.253168] [7: swapper/0: 1] s3c64xx-spi 13920000.spi: PORT 2 fifo_lvl_mask = 0x7f |
| [ 0.253759] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: spi bus clock parent not specified, using clock at index 0 as parent |
| [ 0.253854] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13980000.spi in idle-ip list with err -61 |
| [ 0.253931] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: Not use idle state. |
| [ 0.253944] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: spi clkoff-time is empty(Default: 0ms) |
| [ 0.253958] [7: swapper/0: 1] s3c64xx-spi 13980000.spi: PORT 4 fifo_lvl_mask = 0x7f |
| [ 0.254781] [7: swapper/0: 1] usbcore: registered new interface driver usbfs |
| [ 0.254817] [7: swapper/0: 1] usbcore: registered new interface driver hub |
| [ 0.254901] [7: swapper/0: 1] usbcore: registered new device driver usb |
| [ 0.255004] [7: swapper/0: 1] [Input Booster] input_booster_init |
| [ 0.255300] [7: swapper/0: 1] [Input Booster] input_booster_init ndevice_in_dt : 10 |
| [ 0.255317] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY |
| [ 0.255326] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1 |
| [ 0.255342] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,0,0,0] hmp_boost[1] times[500,500,0] |
| [ 0.255350] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCHKEY |
| [ 0.255359] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1 |
| [ 0.255373] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,0,0,0] hmp_boost[1] times[0,200,0] |
| [ 0.255381] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCH |
| [ 0.255389] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 3 |
| [ 0.255403] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255416] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255429] [7: swapper/0: 1] [Input Booster] Level 2 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0] |
| [ 0.255437] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MULTITOUCH |
| [ 0.255446] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2 |
| [ 0.255459] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[1000,0,0] |
| [ 0.255472] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0] |
| [ 0.255481] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEYBOARD |
| [ 0.255491] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2 |
| [ 0.255506] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255521] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255531] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE |
| [ 0.255539] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2 |
| [ 0.255553] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255567] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0] |
| [ 0.255575] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE WHEEL |
| [ 0.255583] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2 |
| [ 0.255599] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255613] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[0,0,0,0] hmp_boost[0] times[0,0,0] |
| [ 0.255621] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN HOVER |
| [ 0.255631] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2 |
| [ 0.255647] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1144000,839000,0,0] hmp_boost[1] times[130,0,0] |
| [ 0.255661] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,500,0] |
| [ 0.255669] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN |
| [ 0.255676] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2 |
| [ 0.255690] [7: swapper/0: 1] Failed to get [0] param table property |
| [ 0.255701] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1560000,839000,0,0] hmp_boost[1] times[200,0,0] |
| [ 0.255713] [7: swapper/0: 1] Failed to get [1] param table property |
| [ 0.255721] [7: swapper/0: 1] [Input Booster] Level 1 : frequency[936000,839000,0,0] hmp_boost[1] times[0,600,600] |
| [ 0.255729] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY_TWO |
| [ 0.255738] [7: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1 |
| [ 0.255754] [7: swapper/0: 1] [Input Booster] Level 0 : frequency[1872000,0,0,0] hmp_boost[1] times[700,700,0] |
| [ 0.256483] [7: swapper/0: 1] exynos5-hsi2c 138a0000.hsi2c: SDA trigger timing not needed. |
| [ 0.256739] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.256751] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.256762] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.256771] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.256779] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00 |
| [ 0.256798] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.256806] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.256814] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.256821] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.256828] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00 |
| [ 0.257092] [7: swapper/0: 1] exynos5-hsi2c 138b0000.hsi2c: SDA trigger timing not needed. |
| [ 0.257306] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.257319] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.257330] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.257339] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.257348] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00 |
| [ 0.257367] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.257375] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.257383] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.257390] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.257396] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00 |
| [ 0.257639] [7: swapper/0: 1] exynos5-hsi2c 138c0000.hsi2c: SDA trigger timing not needed. |
| [ 0.257840] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.257852] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.257862] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.257871] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.257880] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00 |
| [ 0.257898] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.257906] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.257913] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.257921] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.257927] [7: swapper/0: 1] i2c_timing_s1:4C4C4C00 |
| [ 0.258449] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.258463] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.258475] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.258484] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.258493] [7: swapper/0: 1] i2c_timing_s1:4C4C4C36 |
| [ 0.258514] [7: swapper/0: 1] tSTART_SU: 4C, tSTART_HD: 4C, tSTOP_SU: 4C |
| [ 0.258522] [7: swapper/0: 1] tDATA_SU: 26, tSCL_L: 4C, tSCL_H: 4C |
| [ 0.258529] [7: swapper/0: 1] nClkDiv: 0, tSR_RELEASE: 98 |
| [ 0.258536] [7: swapper/0: 1] tDATA_HD: 26 |
| [ 0.258543] [7: swapper/0: 1] i2c_timing_s1:4C4C4C36 |
| [ 0.258979] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: speedy driver probe started |
| [ 0.259065] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: speedy swreset directly was done |
| [ 0.259106] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: batcher s/w reset was done |
| [ 0.259377] [7: swapper/0: 1] s2mpu08:s2mpu08_i2c_probe |
| [ 0.259418] [7: swapper/0: 1] [DEBUG] of_s2mpu08_dt: codec node exist, name: cod3035x |
| [ 0.259427] [7: swapper/0: 1] of_s2mpu08_dt: irq-gpio: 22 |
| [ 0.259834] [7: swapper/0: 1] s2mpu08 4-0000: use_i2c_speedy was true |
| [ 0.259857] [7: swapper/0: 1] s2mpu08:s2mpu08_irq_init irq=155, irq->gpio=22 |
| [ 0.265827] [7: swapper/0: 1] s2mpu08:s2mpu08_irq_init s2mpu08_PMIC_REG_INTSRC_MASK=0x20 |
| [ 0.266008] [7: swapper/0: 1] s2mpu08_pmic_probe s2mpu08 pmic driver Loading start |
| [ 0.364501] [7: swapper/0: 1] s2mpu08_pmic_probe s2mpu08 pmic driver Loading end |
| [ 0.364628] [7: swapper/0: 1] exynos-speedy 11ce0000.speedy: speedy driver probe was succeeded |
| [ 0.365695] [7: swapper/0: 1] s3c-i2c 13830000.i2c: i2c-5: S3C I2C adapter |
| [ 0.366122] [7: swapper/0: 1] s3c-i2c 13840000.i2c: i2c-6: S3C I2C adapter |
| [ 0.366270] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13850000.i2c in idle-ip list with err -61 |
| [ 0.366521] [7: swapper/0: 1] s3c-i2c 13850000.i2c: i2c-7: S3C I2C adapter |
| [ 0.366916] [7: swapper/0: 1] s3c-i2c 13860000.i2c: i2c-8: S3C I2C adapter |
| [ 0.367315] [7: swapper/0: 1] s3c-i2c 13870000.i2c: i2c-9: S3C I2C adapter |
| [ 0.367521] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 13880000.i2c in idle-ip list with err -61 |
| [ 0.367777] [7: swapper/0: 1] s3c-i2c 13880000.i2c: i2c-10: S3C I2C adapter |
| [ 0.368051] [7: swapper/0: 1] media: Linux media interface: v0.10 |
| [ 0.368094] [7: swapper/0: 1] Linux video capture interface: v2.00 |
| [ 0.368337] [7: swapper/0: 1] exynos_smu_probe: Exynos SMU driver is proved |
| [ 0.368876] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vfw_heap(2) is created |
| [ 0.368899] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vnfw_heap(7) is created |
| [ 0.368912] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vframe_heap(5) is created |
| [ 0.368931] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap vscaler_heap(6) is created |
| [ 0.368950] [7: swapper/0: 1] ion_hpa_heap_create: HPA heap gpu_heap(9) is created |
| [ 0.369226] [7: swapper/0: 1] argos_probe: Start probe |
| [ 0.369290] [7: swapper/0: 1] argos_probe: parse dt done |
| [ 0.369624] [6: swapper/0: 1] s2mu004_pdic_notifier_init |
| [ 0.369643] [6: swapper/0: 1] [SENSORS CORE] sensors_class_init |
| [ 0.369750] [6: swapper/0: 1] [SENSORS CORE] sensors_class_init succcess |
| [ 0.369768] [6: swapper/0: 1] fingerprint_class_init |
| [ 0.369827] [6: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized. |
| [ 0.370349] [6: swapper/0: 1] regulatory is not upadted via queue_regulatory_request. |
| [ 0.371587] [7: swapper/0: 1] clocksource: Switched to clocksource arch_sys_counter |
| [ 0.371806] I[7: swapper/0: 1] set_state_shutdown: mct_tick_stop (cpu7) |
| [ 0.374742] I[0: swapper/0: 0] set_state_shutdown: mct_tick_stop (cpu0) |
| [ 0.374951] I[5: swapper/5: 0] set_state_shutdown: mct_tick_stop (cpu5) |
| [ 0.374963] I[2: swapper/2: 0] set_state_shutdown: mct_tick_stop (cpu2) |
| [ 0.374974] I[3: swapper/3: 0] set_state_shutdown: mct_tick_stop (cpu3) |
| [ 0.374985] I[1: swapper/1: 0] set_state_shutdown: mct_tick_stop (cpu1) |
| [ 0.375158] I[6: swapper/6: 0] set_state_shutdown: mct_tick_stop (cpu6) |
| [ 0.375365] I[4: swapper/4: 0] set_state_shutdown: mct_tick_stop (cpu4) |
| [ 0.400874] [7: swapper/0: 1] __init_sec_tsp_raw_data: vaddr=0xffffffc8742a0000 size=0xc800 |
| [ 0.400890] [7: swapper/0: 1] __init_sec_tsp_raw_data: init done |
| [ 0.401002] [7: swapper/0: 1] NET: Registered protocol family 2 |
| [ 0.401448] [7: swapper/0: 1] default registered |
| [ 0.401461] [7: swapper/0: 1] default registered |
| [ 0.401472] [7: swapper/0: 1] MPTCP: Stable release v0.89.0-rc |
| [ 0.401528] [7: swapper/0: 1] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.401679] [7: swapper/0: 1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.401862] [7: swapper/0: 1] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.401914] [7: swapper/0: 1] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.401954] [7: swapper/0: 1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.402149] [7: swapper/0: 1] NET: Registered protocol family 1 |
| [ 0.402212] [7: swapper/0: 1] exynos-acpm 11c88000.acpm: Loading exynos7885_acpm_fvp.fw firmware ... |
| [ 0.402285] [7: swapper/0: 1] exynos-acpm 11c88000.acpm: OK |
| [ 0.402353] [7: swapper/0: 1] [ACPM] plugin(id = 3) attach done! |
| [ 0.402371] [7: swapper/0: 1] fvmap_init:fvmap initialize ffffff80007d1400 |
| [ 0.402384] [7: swapper/0: 1] dvfs_type : dvfs_mif - id : 0 |
| [ 0.402393] [7: swapper/0: 1] num_of_lv : 10 |
| [ 0.402405] [7: swapper/0: 1] num_of_members : 7 |
| [ 0.402418] [7: swapper/0: 1] lv : [2093000], volt = 868750 uV (0 %) |
| [ 0.402430] [7: swapper/0: 1] lv : [2002000], volt = 868750 uV (0 %) |
| [ 0.402439] [7: swapper/0: 1] lv : [1794000], volt = 743750 uV (0 %) |
| [ 0.402448] [7: swapper/0: 1] lv : [1539000], volt = 743750 uV (0 %) |
| [ 0.402457] [7: swapper/0: 1] lv : [1352000], volt = 656250 uV (0 %) |
| [ 0.402465] [7: swapper/0: 1] lv : [1014000], volt = 656250 uV (0 %) |
| [ 0.402474] [7: swapper/0: 1] lv : [ 845000], volt = 656250 uV (0 %) |
| [ 0.402482] [7: swapper/0: 1] lv : [ 676000], volt = 631250 uV (0 %) |
| [ 0.402491] [7: swapper/0: 1] lv : [ 546000], volt = 631250 uV (0 %) |
| [ 0.402499] [7: swapper/0: 1] lv : [ 420000], volt = 631250 uV (0 %) |
| [ 0.402509] [7: swapper/0: 1] dvfs_type : dvfs_int - id : 1 |
| [ 0.402517] [7: swapper/0: 1] num_of_lv : 5 |
| [ 0.402524] [7: swapper/0: 1] num_of_members : 4 |
| [ 0.402533] [7: swapper/0: 1] lv : [ 533000], volt = 775000 uV (0 %) |
| [ 0.402543] [7: swapper/0: 1] lv : [ 333000], volt = 656250 uV (0 %) |
| [ 0.402552] [7: swapper/0: 1] lv : [ 267000], volt = 618750 uV (0 %) |
| [ 0.402560] [7: swapper/0: 1] lv : [ 133000], volt = 606250 uV (0 %) |
| [ 0.402569] [7: swapper/0: 1] lv : [ 107000], volt = 606250 uV (0 %) |
| [ 0.402579] [7: swapper/0: 1] dvfs_type : dvfs_cpucl0 - id : 2 |
| [ 0.402586] [7: swapper/0: 1] num_of_lv : 17 |
| [ 0.402593] [7: swapper/0: 1] num_of_members : 2 |
| [ 0.402602] [7: swapper/0: 1] lv : [2496000], volt = 0 uV (0 %) |
| [ 0.402612] [7: swapper/0: 1] lv : [2392000], volt = 0 uV (0 %) |
| [ 0.402621] [7: swapper/0: 1] lv : [2288000], volt = 0 uV (0 %) |
| [ 0.402631] [7: swapper/0: 1] lv : [2184000], volt = 1243750 uV (0 %) |
| [ 0.402641] [7: swapper/0: 1] lv : [2080000], volt = 1181250 uV (0 %) |
| [ 0.402651] [7: swapper/0: 1] lv : [1976000], volt = 1125000 uV (0 %) |
| [ 0.402661] [7: swapper/0: 1] lv : [1872000], volt = 1081250 uV (0 %) |
| [ 0.402669] [7: swapper/0: 1] lv : [1768000], volt = 1037500 uV (0 %) |
| [ 0.402678] [7: swapper/0: 1] lv : [1664000], volt = 1000000 uV (0 %) |
| [ 0.402688] [7: swapper/0: 1] lv : [1560000], volt = 962500 uV (0 %) |
| [ 0.402696] [7: swapper/0: 1] lv : [1352000], volt = 887500 uV (0 %) |
| [ 0.402705] [7: swapper/0: 1] lv : [1144000], volt = 818750 uV (0 %) |
| [ 0.402714] [7: swapper/0: 1] lv : [ 936000], volt = 762500 uV (0 %) |
| [ 0.402723] [7: swapper/0: 1] lv : [ 728000], volt = 700000 uV (0 %) |
| [ 0.402731] [7: swapper/0: 1] lv : [ 520000], volt = 643750 uV (0 %) |
| [ 0.402740] [7: swapper/0: 1] lv : [ 312000], volt = 600000 uV (0 %) |
| [ 0.402748] [7: swapper/0: 1] lv : [ 208000], volt = 600000 uV (0 %) |
| [ 0.402758] [7: swapper/0: 1] dvfs_type : dvfs_cpucl1 - id : 3 |
| [ 0.402766] [7: swapper/0: 1] num_of_lv : 18 |
| [ 0.402773] [7: swapper/0: 1] num_of_members : 4 |
| [ 0.402783] [7: swapper/0: 1] lv : [2002000], volt = 0 uV (0 %) |
| [ 0.402792] [7: swapper/0: 1] lv : [1898000], volt = 0 uV (0 %) |
| [ 0.402801] [7: swapper/0: 1] lv : [1794000], volt = 0 uV (0 %) |
| [ 0.402812] [7: swapper/0: 1] lv : [1690000], volt = 1087500 uV (0 %) |
| [ 0.402820] [7: swapper/0: 1] lv : [1586000], volt = 1037500 uV (0 %) |
| [ 0.402829] [7: swapper/0: 1] lv : [1482000], volt = 987500 uV (0 %) |
| [ 0.402837] [7: swapper/0: 1] lv : [1352000], volt = 931250 uV (0 %) |
| [ 0.402845] [7: swapper/0: 1] lv : [1248000], volt = 893750 uV (0 %) |
| [ 0.402855] [7: swapper/0: 1] lv : [1144000], volt = 856250 uV (0 %) |
| [ 0.402863] [7: swapper/0: 1] lv : [1014000], volt = 806250 uV (0 %) |
| [ 0.402871] [7: swapper/0: 1] lv : [ 902000], volt = 768750 uV (0 %) |
| [ 0.402880] [7: swapper/0: 1] lv : [ 839000], volt = 750000 uV (0 %) |
| [ 0.402888] [7: swapper/0: 1] lv : [ 757000], volt = 731250 uV (0 %) |
| [ 0.402897] [7: swapper/0: 1] lv : [ 676000], volt = 706250 uV (0 %) |
| [ 0.402906] [7: swapper/0: 1] lv : [ 546000], volt = 668750 uV (0 %) |
| [ 0.402915] [7: swapper/0: 1] lv : [ 449000], volt = 637500 uV (0 %) |
| [ 0.402923] [7: swapper/0: 1] lv : [ 343000], volt = 612500 uV (0 %) |
| [ 0.402931] [7: swapper/0: 1] lv : [ 208000], volt = 600000 uV (0 %) |
| [ 0.402941] [7: swapper/0: 1] dvfs_type : dvfs_g3d - id : 4 |
| [ 0.402948] [7: swapper/0: 1] num_of_lv : 9 |
| [ 0.402956] [7: swapper/0: 1] num_of_members : 1 |
| [ 0.402965] [7: swapper/0: 1] lv : [1300000], volt = 1200000 uV (0 %) |
| [ 0.402975] [7: swapper/0: 1] lv : [1200000], volt = 1093750 uV (0 %) |
| [ 0.402983] [7: swapper/0: 1] lv : [1100000], volt = 1018750 uV (0 %) |
| [ 0.402991] [7: swapper/0: 1] lv : [1001000], volt = 943750 uV (0 %) |
| [ 0.403001] [7: swapper/0: 1] lv : [ 845000], volt = 843750 uV (0 %) |
| [ 0.403009] [7: swapper/0: 1] lv : [ 676000], volt = 756250 uV (0 %) |
| [ 0.403017] [7: swapper/0: 1] lv : [ 545000], volt = 718750 uV (0 %) |
| [ 0.403027] [7: swapper/0: 1] lv : [ 450000], volt = 681250 uV (0 %) |
| [ 0.403035] [7: swapper/0: 1] lv : [ 343000], volt = 625000 uV (0 %) |
| [ 0.403046] [7: swapper/0: 1] dvfs_type : dvfs_fsys - id : 5 |
| [ 0.403054] [7: swapper/0: 1] num_of_lv : 4 |
| [ 0.403060] [7: swapper/0: 1] num_of_members : 2 |
| [ 0.403069] [7: swapper/0: 1] lv : [ 267000], volt = 750000 uV (0 %) |
| [ 0.403077] [7: swapper/0: 1] lv : [ 200000], volt = 675000 uV (0 %) |
| [ 0.403086] [7: swapper/0: 1] lv : [ 100000], volt = 625000 uV (0 %) |
| [ 0.403094] [7: swapper/0: 1] lv : [ 50000], volt = 625000 uV (0 %) |
| [ 0.403103] [7: swapper/0: 1] dvfs_type : dvfs_cam - id : 6 |
| [ 0.403110] [7: swapper/0: 1] num_of_lv : 5 |
| [ 0.403116] [7: swapper/0: 1] num_of_members : 9 |
| [ 0.403125] [7: swapper/0: 1] lv : [ 690000], volt = 793750 uV (0 %) |
| [ 0.403134] [7: swapper/0: 1] lv : [ 680000], volt = 725000 uV (0 %) |
| [ 0.403142] [7: swapper/0: 1] lv : [ 670000], volt = 718750 uV (0 %) |
| [ 0.403151] [7: swapper/0: 1] lv : [ 660000], volt = 643750 uV (0 %) |
| [ 0.403160] [7: swapper/0: 1] lv : [ 650000], volt = 606250 uV (0 %) |
| [ 0.403169] [7: swapper/0: 1] dvfs_type : dvfs_disp - id : 7 |
| [ 0.403175] [7: swapper/0: 1] num_of_lv : 4 |
| [ 0.403182] [7: swapper/0: 1] num_of_members : 2 |
| [ 0.403191] [7: swapper/0: 1] lv : [ 267000], volt = 637500 uV (0 %) |
| [ 0.403202] [7: swapper/0: 1] lv : [ 222000], volt = 612500 uV (0 %) |
| [ 0.403210] [7: swapper/0: 1] lv : [ 167000], volt = 606250 uV (0 %) |
| [ 0.403218] [7: swapper/0: 1] lv : [ 80000], volt = 606250 uV (0 %) |
| [ 0.403227] [7: swapper/0: 1] dvfs_type : dvfs_aud - id : 8 |
| [ 0.403234] [7: swapper/0: 1] num_of_lv : 4 |
| [ 0.403241] [7: swapper/0: 1] num_of_members : 3 |
| [ 0.403250] [7: swapper/0: 1] lv : [1180000], volt = 768750 uV (0 %) |
| [ 0.403259] [7: swapper/0: 1] lv : [ 800000], volt = 662500 uV (0 %) |
| [ 0.403268] [7: swapper/0: 1] lv : [ 590000], volt = 612500 uV (0 %) |
| [ 0.403276] [7: swapper/0: 1] lv : [ 394000], volt = 600000 uV (0 %) |
| [ 0.403285] [7: swapper/0: 1] dvfs_type : dvs_cp - id : 9 |
| [ 0.403292] [7: swapper/0: 1] num_of_lv : 2 |
| [ 0.403299] [7: swapper/0: 1] num_of_members : 1 |
| [ 0.403307] [7: swapper/0: 1] lv : [1000000], volt = 750000 uV (0 %) |
| [ 0.403316] [7: swapper/0: 1] lv : [ 800000], volt = 750000 uV (0 %) |
| [ 0.403487] [7: swapper/0: 1] Trying to unpack rootfs image as initramfs... |
| [ 0.506644] [7: swapper/0: 1] Freeing initrd memory: 3632K (ffffffc003000000 - ffffffc00338c000) |
| [ 0.508017] [7: swapper/0: 1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available |
| [ 0.510085] [6: swapper/0: 1] futex hash table entries: 2048 (order: 6, 262144 bytes) |
| [ 0.510162] [6: swapper/0: 1] audit: initializing netlink subsys (enabled) |
| [ 0.517984] [6: swapper/0: 1] VFS: Disk quotas dquot_6.6.0 |
| [ 0.518101] [6: swapper/0: 1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.519103] [6: swapper/0: 1] [SDFAT] Filesystem version 1.4.10 |
| [ 0.519663] [6: swapper/0: 1] Registering sdcardfs 3.2.1 |
| [ 0.519778] [6: swapper/0: 1] fuse init (API version 7.23) |
| [ 0.520059] [6: swapper/0: 1] SELinux: Registering netfilter hooks |
| [ 0.520407] [6: swapper/0: 1] tima_uevent_init |
| [ 0.520475] [6: swapper/0: 1] TIMA uevent driver (tima_uevent) is initialized. |
| [ 0.520491] [6: swapper/0: 1] mst_drv_init |
| [ 0.520867] [6: swapper/0: 1] mst_ldo_device_probe init start |
| [ 0.520889] [6: swapper/0: 1] [MST] Data Value : 127 |
| [ 0.520900] [6: swapper/0: 1] MST_DRV]]] gpio pwr en inited |
| [ 0.520923] [6: swapper/0: 1] sec_mst_gpio_init : Send Output |
| [ 0.520933] [6: swapper/0: 1] mst_ldo_device_probe |
| [ 0.521003] [6: swapper/0: 1] MST drv driver (mst_drv) is initialized. |
| [ 0.521036] [6: swapper/0: 1] MST_LDO_DRV]]] init , ret val : 0 |
| [ 0.521402] [6: swapper/0: 1] key_dump feature not availabledek: initialized |
| [ 0.521425] [6: swapper/0: 1] SDP_MM: entering************************************************ |
| [ 0.521570] [6: swapper/0: 1] SDP_PUB_CRYPTO[1] : pub_crypto_mod_init netlink socket is created successfully! |
| [ 0.521693] [6: swapper/0: 1] SDP_FS_HANDLER[1] : sdp_fs_handler_mod_init netlink socket is created successfully! |
| [ 0.521780] [6: swapper/0: 1] DLP: dlp_ioctl initialized |
| [ 0.524534] [7: swapper/0: 1] io scheduler noop registered |
| [ 0.524735] [7: swapper/0: 1] io scheduler cfq registered (default) |
| [ 0.525099] [7: swapper/0: 1] exynos-mipi-phy phy_m4s4_dsi@0x12821008: mipi-phy reset be controlled from outside!!! |
| [ 0.525115] [7: swapper/0: 1] exynos-mipi-phy phy_m4s4_dsi@0x12821008: exynos_mipi_phy_probe: iso 0x678, reset -1 (-1) |
| [ 0.525225] [7: swapper/0: 1] exynos-mipi-phy phy_m4s4_dsi@0x12821008: Creating exynos-mipi-phy |
| [ 0.525437] [7: swapper/0: 1] exynos-mipi-phy 14510840.phy_isp_csis0: doesn't use mipi-phy init control!!! |
| [ 0.525453] [7: swapper/0: 1] exynos-mipi-phy 14510840.phy_isp_csis0: exynos_mipi_phy_probe: iso 0x680, reset 8 (-1) |
| [ 0.525536] [7: swapper/0: 1] exynos-mipi-phy 14510840.phy_isp_csis0: Creating exynos-mipi-phy |
| [ 0.525612] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis1@14510840: exynos_mipi_phy_probe: iso 0x67c, reset 16 (-1) |
| [ 0.525689] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis1@14510840: Creating exynos-mipi-phy |
| [ 0.525752] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis2@14510840: exynos_mipi_phy_probe: iso 0x67c, reset 24 (-1) |
| [ 0.525827] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis2@14510840: Creating exynos-mipi-phy |
| [ 0.525894] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis3@14510840: exynos_mipi_phy_probe: iso 0x678, reset 0 (-1) |
| [ 0.525972] [7: swapper/0: 1] exynos-mipi-phy phy_isp_csis3@14510840: Creating exynos-mipi-phy |
| [ 0.526507] [7: swapper/0: 1] exynos_usbdrd_phy_probe: +++ 135d0000.phy |
| [ 0.526533] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: It has not the other phy |
| [ 0.526548] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: It is TYPE USB3DRD |
| [ 0.526563] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: don't need user Mux for phyclk |
| [ 0.526818] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: non-DT: PHY CON Selection |
| [ 0.527669] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: don't need usbphy tuning info for super speed |
| [ 0.527686] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: don't need usbphy tuning info for super speed |
| [ 0.527773] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: exynos_usbdrd_fill_hstune_param hs tune cnt = 12 |
| [ 0.527798] [7: swapper/0: 1] phy_exynos_usbdrd 135d0000.phy: usbphy info: version:0x300, refclk:0x7 |
| [ 0.527812] [7: swapper/0: 1] exynos_usbdrd_phy_probe: --- |
| [ 0.528308] [7: swapper/0: 1] samsung-pwm 13970000.pwm: base_clk at 66625000 |
| [ 0.528707] [7: swapper/0: 1] exynos-itmon ITMON@0: success to register request irq57 - ITMON_DATA |
| [ 0.528797] [7: swapper/0: 1] exynos-itmon ITMON@0: success to register request irq58 - ITMON_PERI |
| [ 0.528895] [7: swapper/0: 1] exynos-itmon ITMON@0: success to probe Exynos ITMON driver |
| [ 0.529175] [7: swapper/0: 1] persistent_ram: found existing buffer, size 0, start 0 |
| [ 0.529201] [7: swapper/0: 1] persistent_ram: found existing buffer, size 0, start 0 |
| [ 0.529223] [7: swapper/0: 1] persistent_ram: found existing buffer, size 0, start 0 |
| [ 0.529259] [7: swapper/0: 1] persistent_ram: found existing buffer, size 300328, start 300328 |
| [ 0.529568] [7: swapper/0: 1] pstore: Registered ramoops as persistent store backend |
| [ 0.529581] [7: swapper/0: 1] ramoops: attached 0x200000@0x92400000, ecc: 0/0 |
| [ 0.531537] [6: swapper/0: 1] dma-pl330 12020000.pdma0: Loaded driver for PL330 DMAC-341330 |
| [ 0.531554] [6: swapper/0: 1] dma-pl330 12020000.pdma0: DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 |
| [ 0.532602] [5: swapper/0: 1] exynos-seclog seclog: Message buffer address[0xc0000000], Message buffer size[0x80000] |
| [ 0.532627] [5: swapper/0: 1] exynos-seclog seclog: Exynos Secure Log driver probe done! |
| [ 0.533033] [6: swapper/0: 1] [HDCP2]hdcp_init:341: hdcp2 driver init |
| [ 0.533676] [6: swapper/0: 1] 13810000.uart: ttySAC1 at MMIO 0x13810000 (irq = 60, base_baud = 0) is a S3C6400/10 |
| [ 0.534117] [6: swapper/0: 1] 13820000.uart: ttySAC2 at MMIO 0x13820000 (irq = 61, base_baud = 0) is a S3C6400/10 |
| [ 0.534903] [6: swapper/0: 1] [ExyRNG] passed the start-up test |
| [ 0.536210] [7: swapper/0: 1] ExyRNG: hwrng registered |
| [ 0.536249] [7: swapper/0: 1] ExyRNG driver, (c) 2014 Samsung Electronics |
| [ 0.536480] [7: swapper/0: 1] mali 11500000.mali: Continuing without Mali regulator control |
| [ 0.536496] [7: swapper/0: 1] mali 11500000.mali: Continuing without Mali clock control |
| [ 0.536686] [7: swapper/0: 1] [G3D] G3D 1300000Khz ASV is 1200000uV |
| [ 0.536696] [7: swapper/0: 1] [G3D] G3D 1200000Khz ASV is 1093750uV |
| [ 0.536705] [7: swapper/0: 1] [G3D] G3D 1100000Khz ASV is 1018750uV |
| [ 0.536714] [7: swapper/0: 1] [G3D] G3D 1001000Khz ASV is 943750uV |
| [ 0.536724] [7: swapper/0: 1] [G3D] G3D 845000Khz ASV is 843750uV |
| [ 0.536733] [7: swapper/0: 1] [G3D] G3D 676000Khz ASV is 756250uV |
| [ 0.536742] [7: swapper/0: 1] [G3D] G3D 545000Khz ASV is 718750uV |
| [ 0.536749] [7: swapper/0: 1] [G3D] G3D 450000Khz ASV is 681250uV |
| [ 0.536756] [7: swapper/0: 1] [G3D] G3D 343000Khz ASV is 625000uV |
| [ 0.536975] [7: swapper/0: 1] [G3D] [GPU] core fused reg info, Addr[0xffffff800027e024], Data[0x0] |
| [ 0.536987] [7: swapper/0: 1] [G3D] [GPU] core shift info = 0x0 |
| [ 0.537216] [7: swapper/0: 1] mali 11500000.mali: GPU identified as 0x60a0 r0p0 status 2 |
| [ 0.537290] [7: swapper/0: 1] mali 11500000.mali: Support Secure Rendering with Exynos SoC |
| [ 0.537768] [6: swapper/0: 1] mali 11500000.mali: Probed as mali0 |
| [ 0.537941] [6: swapper/0: 1] vbus_notifier_init |
| [ 0.537956] [6: swapper/0: 1] [MUIC] muic_notifier_init |
| [ 0.538307] [6: swapper/0: 1] Unable to detect cache hierarchy from DT for CPU 0 |
| [ 0.549824] [7: swapper/0: 1] brd: module loaded |
| [ 0.557897] [6: swapper/0: 1] loop: module loaded |
| [ 0.558259] [6: swapper/0: 1] mcu_ipc 12080000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start. |
| [ 0.558388] [6: swapper/0: 1] mcu_ipc 12080000.mcu_ipc: irq_affinity_mask = 0x3 |
| [ 0.558405] [6: swapper/0: 1] mcu_ipc 12080000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done. |
| [ 0.558452] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe start. |
| [ 0.558509] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: Failed to get affinity mask |
| [ 0.558520] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: Can't set IRQ affinity with(-19) |
| [ 0.558531] [6: swapper/0: 1] mcu_ipc 120d0000.mcu_ipc: mcu_ipc_probe: mcu_ipc probe done. |
| [ 0.558928] [6: swapper/0: 1] shm_ipc shmem@F6E00000: shm_probe: shmem driver init |
| [ 0.558960] [6: swapper/0: 1] shm_ipc shmem@F6E00000: cp_mem_base: 0xf5400000, 0xffffff8000296000 |
| [ 0.558984] [6: swapper/0: 1] shm_ipc shmem@F6E00000: paddr=0xF5400000, total_size=0x08800000, ipc_off=0x08000000, ipc_size=0x00800000, cp_size=0x07900000, vss_size=0x00700000 |
| [ 0.558998] [6: swapper/0: 1] shm_ipc shmem@F6E00000: zmb_off=0x00000000, zmb_size=0x00000000 |
| [ 0.559011] [6: swapper/0: 1] shm_ipc shmem@F6E00000: acpm_base=0x02052000, acpm_size=0x0001B000 |
| [ 0.559022] [6: swapper/0: 1] Release cplog reserved memory |
| [ 0.562665] [6: swapper/0: 1] usim_detect_probe +++ |
| [ 0.562680] [6: swapper/0: 1] num_of_usim_det: 2 |
| [ 0.562808] [7: swapper/0: 1] wake enabled for irq 156 |
| [ 0.562829] [0:irq/156-usim_de: 1177] usim_dt_interrupt0: MODEM_STATE is not online, Do not anyting. |
| [ 0.562900] [7: swapper/0: 1] wake enabled for irq 157 |
| [ 0.562915] [0:irq/157-usim_de: 1178] usim_dt_interrupt1: MODEM_STATE is not online, Do not anyting. |
| [ 0.562924] [7: swapper/0: 1] init value of usim_det0: 0 |
| [ 0.562937] [7: swapper/0: 1] init value of usim_det1: 0 |
| [ 0.562952] [7: swapper/0: 1] usim_detect_probe --- |
| [ 0.563264] [7: swapper/0: 1] gif: gnss_probe: gnss_pdata: +++ |
| [ 0.563282] [7: swapper/0: 1] gif_exynos gnss_pdata: assigned reserved memory node gnss_if |
| [ 0.563411] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:5] reg_rx_ipc_msg |
| [ 0.563422] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:4] reg_tx_ipc_msg |
| [ 0.563432] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:3] reg_rx_head |
| [ 0.563442] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:2] reg_rx_tail |
| [ 0.563452] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:1] reg_tx_head |
| [ 0.563462] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Found reg: [1:0] reg_tx_tail |
| [ 0.563473] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: Fault info: gnss_fault_info [1:2097152:1572864] |
| [ 0.563483] [7: swapper/0: 1] gif: gnss_if_parse_dt_pdata: DT parse complete! |
| [ 0.563500] [7: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Initializing GNSS Control |
| [ 0.563685] [7: swapper/0: 1] gif: init_gnssctl_device: Using simple lock sequence!!! |
| [ 0.563696] [7: swapper/0: 1] gif: init_gnssctl_device: Initializing shared memory for GNSS. |
| [ 0.563707] [7: swapper/0: 1] gif: set_shdmem_size: Set shared mem size: 4194304B |
| [ 0.563724] [7: swapper/0: 1] gif: set_shdmem_base: Set shared mem baseaddr : 0xffc00000 |
| [ 0.563746] [7: swapper/0: 1] gif: init_gnssctl_device: [GNSS IF] Register mailbox for GNSS2AP fault handling |
| [ 0.563797] [7: swapper/0: 1] gnss_pdata supply vdd_sensor_2p85 not found, using dummy regulator |
| [ 0.563860] [7: swapper/0: 1] gif: init_gnssctl_device: --- |
| [ 0.563872] [7: swapper/0: 1] gif: create_ctl_device: KEPLER is created!!! |
| [ 0.563884] [7: swapper/0: 1] gif: create_link_device_shmem: SHMEM: KEPLER |
| [ 0.564096] [7: swapper/0: 1] gif: create_link_device_shmem: GNSS_SHDMEM: Reserved Region phys_addr:0xFFC00000 virt_addr:0xffffff8000b86000 size: 3670016 |
| [ 0.564143] [7: swapper/0: 1] gif: create_link_device_shmem: GNSS_SHDMEM: Fault Region phys_addr:0xFFE00000 virt_addr:0xffffff8000f07000 size:1572864 |
| [ 0.564168] [7: swapper/0: 1] gif: create_link_device_shmem: GNSS_SHDMEM: IPC Region phys_addr:0xFFF80000 virt_addr:0xffffff8001088000 size:524288 |
| [ 0.564179] [7: swapper/0: 1] gif: shmem_remap_ipc_region: RX region : 40000 @ ffffff8001088000 |
| [ 0.564189] [7: swapper/0: 1] gif: shmem_remap_ipc_region: TX region : 3ff80 @ ffffff80010c8000 |
| [ 0.564199] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_rx_ipc_msg -> ffffff8001107f94 |
| [ 0.564208] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_tx_ipc_msg -> ffffff8001107f90 |
| [ 0.564218] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_rx_head -> ffffff8001107f8c |
| [ 0.564225] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_rx_tail -> ffffff8001107f88 |
| [ 0.564233] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_tx_head -> ffffff8001107f84 |
| [ 0.564243] [7: swapper/0: 1] gif: shmem_remap_ipc_region: Reg reg_tx_tail -> ffffff8001107f80 |
| [ 0.564563] [6: swapper/0: 1] gif: create_io_device: gnss_ipc created |
| [ 0.564573] [6: swapper/0: 1] gif: gnss_probe: KEPLER: --- |
| [ 0.564848] [6: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: +++ (eur_open) |
| [ 0.565015] [6: swapper/0: 1] mif: modem_if_parse_dt_pdata: DT parse complete! |
| [ 0.565183] [6: swapper/0: 1] mif: ss310ap_init_modemctl_device: +++ |
| [ 0.565248] [6: swapper/0: 1] mif: mif_init_irq: name:cp_fail num:124 flags:0x00014000 |
| [ 0.565282] [6: swapper/0: 1] mif: mif_request_irq: cp_fail(#124) handler registered (flags:0x00014000) |
| [ 0.565302] [6: swapper/0: 1] mif: mif_disable_irq: cp_fail(#124) is disabled <ss310ap_init_modemctl_device> |
| [ 0.565333] [6: swapper/0: 1] mif: mif_init_irq: name:cp_wdt num:125 flags:0x00014000 |
| [ 0.565358] [6: swapper/0: 1] mif: mif_request_irq: cp_wdt(#125) handler registered (flags:0x00014000) |
| [ 0.565370] [6: swapper/0: 1] mif: mif_disable_irq: cp_wdt(#125) is disabled <ss310ap_init_modemctl_device> |
| [ 0.565386] [6: swapper/0: 1] mif: ss310ap_init_modemctl_device: cp_rst_n: Invalied gpio pins |
| [ 0.565395] [6: swapper/0: 1] mif: ss310ap_init_modemctl_device: --- |
| [ 0.565404] [6: swapper/0: 1] mif: create_modemctl_device: s327ap is created!!! |
| [ 0.565413] [6: swapper/0: 1] mif: shmem_create_link_device: +++ |
| [ 0.565423] [6: swapper/0: 1] mif: shmem_create_link_device: MODEM:s327ap LINK:shmem |
| [ 0.565450] [6: swapper/0: 1] mif: shmem_create_link_device: shmem<->s327ap: LINK_ATTR_SBD_IPC |
| [ 0.565502] [6: swapper/0: 1] mif: shmem_create_link_device: shmem<->s327ap: LINK_ATTR_DPRAM_MAGIC |
| [ 0.568063] [6: swapper/0: 1] mif: shmem_create_link_device: boot_base=ffffff8001109000, boot_size=134217728 |
| [ 0.568236] [6: swapper/0: 1] mif: shmem_create_link_device: ipc_base=ffffff800910a000, ipc_size=8388608 |
| [ 0.568382] [6: swapper/0: 1] mif: shmem_create_link_device: vss_base=ffffff800990b000 |
| [ 0.568404] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing MIF table... |
| [ 0.568422] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[10] : 2093000 |
| [ 0.568432] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[9] : 2002000 |
| [ 0.568442] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[8] : 1794000 |
| [ 0.568452] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[7] : 1539000 |
| [ 0.568462] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[6] : 1352000 |
| [ 0.568471] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[5] : 1014000 |
| [ 0.568481] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[4] : 845000 |
| [ 0.568489] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[3] : 676000 |
| [ 0.568498] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[2] : 546000 |
| [ 0.568507] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: MIF_LEV[1] : 420000 |
| [ 0.568514] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing CL0 table... |
| [ 0.568526] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[17] : 2496000 |
| [ 0.568538] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[16] : 2392000 |
| [ 0.568549] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[15] : 2288000 |
| [ 0.568558] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[14] : 2184000 |
| [ 0.568567] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[13] : 2080000 |
| [ 0.568576] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[12] : 1976000 |
| [ 0.568584] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[11] : 1872000 |
| [ 0.568594] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[10] : 1768000 |
| [ 0.568603] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[9] : 1664000 |
| [ 0.568612] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[8] : 1560000 |
| [ 0.568621] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[7] : 1352000 |
| [ 0.568630] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[6] : 1144000 |
| [ 0.568640] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[5] : 936000 |
| [ 0.568650] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[4] : 728000 |
| [ 0.568659] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[3] : 520000 |
| [ 0.568669] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[2] : 312000 |
| [ 0.568679] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL0_LEV[1] : 208000 |
| [ 0.568687] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing CL1 table... |
| [ 0.568701] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[18] : 2002000 |
| [ 0.568711] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[17] : 1898000 |
| [ 0.568720] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[16] : 1794000 |
| [ 0.568730] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[15] : 1690000 |
| [ 0.568741] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[14] : 1586000 |
| [ 0.568751] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[13] : 1482000 |
| [ 0.568759] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[12] : 1352000 |
| [ 0.568768] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[11] : 1248000 |
| [ 0.568777] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[10] : 1144000 |
| [ 0.568785] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[9] : 1014000 |
| [ 0.568794] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[8] : 902000 |
| [ 0.568803] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[7] : 839000 |
| [ 0.568812] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[6] : 757000 |
| [ 0.568822] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[5] : 676000 |
| [ 0.568831] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[4] : 546000 |
| [ 0.568840] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[3] : 449000 |
| [ 0.568849] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[2] : 343000 |
| [ 0.568858] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: CL1_LEV[1] : 208000 |
| [ 0.568867] [6: swapper/0: 1] mif: shmem_create_link_device: Parsing INT table... |
| [ 0.568884] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[5] : 533000 |
| [ 0.568894] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[4] : 333000 |
| [ 0.568904] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[3] : 267000 |
| [ 0.568914] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[2] : 133000 |
| [ 0.568925] [6: swapper/0: 1] mif: exynos_devfreq_parse_ect: INT_LEV[1] : 107000 |
| [ 0.568935] [6: swapper/0: 1] mif: shmem_create_link_device: packet log device create fail |
| [ 0.568948] [6: swapper/0: 1] clean_vss_magic_code: set vss magic code as 0 |
| [ 0.568982] [6: swapper/0: 1] mif: shmem_create_link_device: --- |
| [ 0.568996] [6: swapper/0: 1] mif: modem_probe: s327ap: shmem link created |
| [ 0.569129] [6: swapper/0: 1] mif: create_io_device: umts_ipc0 created |
| [ 0.569267] [6: swapper/0: 1] mif: create_io_device: umts_ipc1 created |
| [ 0.569394] [6: swapper/0: 1] mif: create_io_device: umts_rfs0 created |
| [ 0.569501] [6: swapper/0: 1] mif: create_io_device: umts_csd created |
| [ 0.569615] [6: swapper/0: 1] mif: create_io_device: umts_router created |
| [ 0.570007] [6: swapper/0: 1] mif: sipc5_init_io_device: iod:umts_dm0, both registerd |
| [ 0.570017] [6: swapper/0: 1] mif: create_io_device: umts_dm0 created |
| [ 0.570106] [6: swapper/0: 1] mif: create_io_device: ipc_loopback0 created |
| [ 0.570392] [6: swapper/0: 1] mif: create_io_device: rmnet0 created |
| [ 0.570670] [6: swapper/0: 1] mif: create_io_device: rmnet1 created |
| [ 0.570940] [6: swapper/0: 1] mif: create_io_device: rmnet2 created |
| [ 0.571200] [6: swapper/0: 1] mif: create_io_device: rmnet3 created |
| [ 0.571454] [6: swapper/0: 1] mif: create_io_device: rmnet4 created |
| [ 0.571791] [6: swapper/0: 1] mif: create_io_device: rmnet5 created |
| [ 0.572065] [6: swapper/0: 1] mif: create_io_device: rmnet6 created |
| [ 0.572317] [6: swapper/0: 1] mif: create_io_device: rmnet7 created |
| [ 0.572487] [6: swapper/0: 1] mif: create_io_device: multipdp_hiprio created |
| [ 0.572620] [6: swapper/0: 1] mif: create_io_device: multipdp created |
| [ 0.572631] [6: swapper/0: 1] mif: create_io_device: BOOT device = umts_boot0 |
| [ 0.572718] [6: swapper/0: 1] mif: create_io_device: umts_boot0 created |
| [ 0.572830] [6: swapper/0: 1] mif: create_io_device: umts_ramdump0 created |
| [ 0.572854] [6: swapper/0: 1] mif: modem_probe: 10000.mif_pdata: --- |
| [ 0.572985] [6: swapper/0: 1] Samlog Debugfs Initialized |
| [ 0.572998] [6: swapper/0: 1] scsc_logring:: Allocated STATIC ring buffer of size 4194304 bytes. |
| [ 0.573009] [6: swapper/0: 1] Samlog Loaded. |
| [ 0.573020] [6: swapper/0: 1] Samlog Started. |
| [ 0.573216] [6: swapper/0: 1] platform_mif_create: Creating MIF platform device |
| [ 0.573247] [6: swapper/0: 1] platform_mif_create: WLBT TZASC configured OK |
| [ 0.573264] [6: swapper/0: 1] platform_mif_create: platform->mem_start 0xe9000000 platform->mem_size 0x400000 |
| [ 0.573283] [6: swapper/0: 1] platform_mif_create: platform->btaboxmem_start 0x8fe400000 platform->btaboxmem_size 0x400000 |
| [ 0.573317] [6: swapper/0: 1] platform_mif_create: platform->reg_start 120c0000 size 180 base ffffff800029e000 |
| [ 0.573340] [6: swapper/0: 1] platform_mif_create: platform->reg_start_m4 120e0000 size_m4 180 base_m4 ffffff80002b2000 |
| [ 0.573357] [6: swapper/0: 1] platform_mif_create: MBOX irq 95 flag 0x404 |
| [ 0.573373] [6: swapper/0: 1] platform_mif_create: ALIVE irq 96 flag 0x404 |
| [ 0.573388] [6: swapper/0: 1] platform_mif_create: WDOG irq 97 flag 0x404 |
| [ 0.573589] [6: swapper/0: 1] scsc_mx_module_init: mx140 Core Driver scsc_release 5.27.1 (build type: User |
| [ 0.573589] [6: swapper/0: 1] ) |
| [ 0.573614] [6: swapper/0: 1] platform_mif_irq_reg_handler: Registering mif int handler mifiintrman_isr+0x0/0xc4 in ffffffc874540818 ffffffc874540818 |
| [ 0.573633] [6: swapper/0: 1] platform_mif_suspend_reg_handler: Registering mif suspend/resume handlers in ffffffc874540818 ffffffc874540818 |
| [ 0.573831] [7: swapper/0: 1] srvman_init: |
| [ 0.573863] [7: swapper/0: 1] scsc_mx_module_probe_registered_clients: No clients registered |
| [ 0.573885] [7: swapper/0: 1] mx_mmap_init: mx_mmap INIT; version: 0.0 |
| [ 0.574053] [7: swapper/0: 1] platform_mif_get_mifram_ptr: Memory unmmaped |
| [ 0.574074] [7: swapper/0: 1] scsc_bt_module_init: SCSC MX BT Driver -devel (C) Samsung Electronics Co., Ltd |
| [ 0.574315] [7: swapper/0: 1] slsi_bt_service_probe: BT service probe (BT driver ffffffc874994000) |
| [ 0.574332] [7: swapper/0: 1] slsi_ant_service_probe: ANT service probe (ANT driver ffffffc874994000) |
| [ 0.574501] [7: swapper/0: 1] tima_debug_log_read_init: Registering /proc/tima_debug_log Interface |
| [ 0.574518] [7: swapper/0: 1] dmverity_odin_flag_read_init:: Registering /proc/dmverity_odin_flag Interface |
| [ 0.574532] [7: swapper/0: 1] s2mu004:s2mu004_i2c_init |
| [ 0.574664] [7: swapper/0: 1] s2mu004 6-003d: s2mu004_i2c_probe start |
| [ 0.574682] [7: swapper/0: 1] of_s2mu004_dt: irq-gpio: 24 |
| [ 0.575432] [7: swapper/0: 1] [s2mu004 mfd] s2mu004_i2c_probe : 0x38, rev=0x3, ver=0x8 |
| [ 0.575447] [7: swapper/0: 1] s2mu004:s2mu004_irq_init irq=131, irq->gpio=24 |
| [ 0.663172] [6: swapper/0: 1] [MUIC] s2mu004_muic_probe start |
| [ 0.663281] [6: swapper/0: 1] [MUIC] muic_notifier_register: listener=0 register |
| [ 0.663291] [6: swapper/0: 1] [MUIC] muic_handle_dock_notification: ignore(70) |
| [ 0.663299] [6: swapper/0: 1] [MUIC] muic_init_switch_dev_cb: done |
| [ 0.663307] [6: swapper/0: 1] [MUIC] muic_manager_init |
| [ 0.663315] [6: swapper/0: 1] [MUIC] muic_manager_register_notifier: Registering CCIC_NOTIFY_DEV_MUIC. |
| [ 0.663323] [6: swapper/0: 1] [MUIC] muic_manager_init_dev_desc |
| [ 0.663331] [6: swapper/0: 1] usb: [M] manager_notifier_init |
| [ 0.663377] [6: swapper/0: 1] vbus_notifier_register: listener=2 register |
| [ 0.663390] [6: swapper/0: 1] usb: [M] manager_handle_vbus_notification: cmd=0, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0) |
| [ 0.663398] [6: swapper/0: 1] ccic_notifier_register: listener=6 register |
| [ 0.663405] [6: swapper/0: 1] ccic_notifier_init |
| [ 0.663452] [6: swapper/0: 1] usb: [M] manager_handle_ccic_notification: src:INITIAL dest:INITIAL id:ID_INITIAL attach/rid:0 |
| [ 0.663463] [6: swapper/0: 1] usb: [M] manager_notifier_notify: src:INITIAL dest:INITIAL id:ID_INITIAL sub1:00 sub2:00 sub3:00 |
| [ 0.663482] [6: swapper/0: 1] usb_notify: register_usblog_proc size=22592 |
| [ 0.663491] [6: swapper/0: 1] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 0.663498] [6: swapper/0: 1] [MUIC] muic_notifier_register: listener=8 register |
| [ 0.663506] [6: swapper/0: 1] usb: [M] manager_handle_muic_notification: attach:0, cable_type:70 |
| [ 0.663514] [6: swapper/0: 1] usb: [M] manager_handle_muic_notification: Cable(70) Detached |
| [ 0.663523] [6: swapper/0: 1] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:00 sub2:00 sub3:46 |
| [ 0.663530] [6: swapper/0: 1] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 0.663538] [6: swapper/0: 1] manager_notifier_init : result of register = 0! |
| [ 0.663545] [6: swapper/0: 1] manager_notifier_init : done! |
| [ 0.663555] [6: swapper/0: 1] usb: [M] manager_notifier_init end |
| [ 0.663563] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=21 register |
| [ 0.663574] [6: swapper/0: 1] [MUIC] muic_manager_register_notifier: done. |
| [ 0.663607] [6: swapper/0: 1] [MUIC] s2mu004_muic_init_interface, muic_if : 0xffffffc07f50a000, muic_data : 0xffffffc8738c8018 |
| [ 0.663677] [6: swapper/0: 1] [MUIC] of_s2mu004_muic_dt : could not find muic sub-node np_muic |
| [ 0.663689] [6: swapper/0: 1] [MUIC] no muic dt! ret[-22] |
| [ 0.663703] [6: swapper/0: 1] [MUIC] muic_init_gpio_cb (11) |
| [ 0.663711] [6: swapper/0: 1] [MUIC] [muic_core] func not defined muic_init_gpio_cb |
| [ 0.663736] [6: swapper/0: 1] [MUIC] AP_UART, GPIO_UART_SEL(0)=H |
| [ 0.663748] [6: swapper/0: 1] [MUIC] muic_init_gpio_cb: usb_path(PDA), uart_path(AP) |
| [ 0.664476] [6: swapper/0: 1] [MUIC] s2mu004_init_rev_info : vendor=0x5, ver=0x8, dev_id=0x38 |
| [ 0.664476] [6: swapper/0: 1] rev id =0x3 |
| [ 0.664492] [6: swapper/0: 1] [MUIC] s2mu004_muic_reg_init |
| [ 0.667618] [6: swapper/0: 1] [MUIC] dev[1:0x80, 2:0x0, 3:0x0], adc:0x0 |
| [ 0.667629] [6: swapper/0: 1] [MUIC] s2mu004 s2mu004_muic_reg_init s2mu004 usb-c type |
| [ 0.669634] [6: swapper/0: 1] [MUIC] s2mu004_muic_control_rid_adc (Enable) |
| [ 0.670726] [6: swapper/0: 1] [MUIC] s2mu004_muic_control_vbus_det (Disable) |
| [ 0.673976] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xd4) value(0x1f) |
| [ 0.675066] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xd5) value(0x5c) |
| [ 0.676157] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xd5) value(0x5c) |
| [ 0.676171] [6: swapper/0: 1] vbus_notifier_handle: (0)->(1) |
| [ 0.676183] [6: swapper/0: 1] vbus_notifier_notify: CMD=1, DATA=1 |
| [ 0.676197] [6: swapper/0: 1] usb: [M] manager_handle_vbus_notification: cmd=1, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0) |
| [ 0.676206] [6: swapper/0: 1] vbus_notifier_notify: notify done(0x0) |
| [ 0.676216] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_initialize |
| [ 0.679299] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x4b] = [0x00] + [0x00] -> [0x00] |
| [ 0.681011] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x49] = [0x00] + [0x00] -> [0x00] |
| [ 0.682722] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x4a] = [0x00] + [0x00] -> [0x00] |
| [ 0.684437] [6: swapper/0: 1] [MUIC_HV] s2mu004_hv_muic_write_reg reg[0x5f] = [0x01] + [0x01] -> [0x01] |
| [ 0.684450] [6: swapper/0: 1] [MUIC] AFC mode enabled |
| [ 0.702864] [6: swapper/0: 1] [MUIC] s2mu004_muic_irq_init muic-attach(181), muic-detach(182), muic-rid_chg(186), muic-vbus_on(187) |
| [ 0.702877] [6: swapper/0: 1] [MUIC] muic-rsvd_attach(188), muic-adc_change(189), muic-av_charge(193), muic-vbus_off(194) |
| [ 0.702887] [6: swapper/0: 1] [MUIC_HV] s2mu004_afc_muic_irq_init |
| [ 0.712089] [6: swapper/0: 1] [MUIC_HV] mrxrdy(0), mpnack(180), vbadc(173), vdnmon(174) |
| [ 0.712728] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_ctrl_reg 0x12 != 0x13, update |
| [ 0.714441] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_ctrl_reg after change(0x12) |
| [ 0.714455] [6: swapper/0: 1] [MUIC] -1 S2MU004_NONE_CABLE start |
| [ 0.715092] [6: swapper/0: 1] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 0.715731] [6: swapper/0: 1] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : -159 |
| [ 0.715743] [6: swapper/0: 1] [MUIC] s2mu004_muic_irq_thread attach_mode : 0, irq_num: -159 |
| [ 0.738779] [6: swapper/0: 1] [MUIC] dev[1:0x80, 2:0x00, 3:0x00] |
| [ 0.738792] [6: swapper/0: 1] [MUIC] adc:0x00, vbvolt:0x00, apple:0x04 |
| [ 0.738803] [6: swapper/0: 1] [MUIC] chg_type:0x00, vmid:0x01, dev_id:0x38 |
| [ 0.738815] [6: swapper/0: 1] [MUIC] s2mu004_muic_detect_with_ccic change mode to first attach! |
| [ 0.738826] [6: swapper/0: 1] [MUIC] muic_pdic_notifier_attach_attached_dev: (52) |
| [ 0.738836] [6: swapper/0: 1] [MUIC] muic_ccic_notifier_notify: CMD=4, DATA=52 |
| [ 0.738846] [6: swapper/0: 1] [MUIC] muic_ccic_notifier_notify: notify done(0x0) |
| [ 0.738859] [6: swapper/0: 1] [MUIC] ATTACHED_DEV_UNKNOWN_MUIC S2MU004_FIRST_ATTACH done |
| [ 0.739490] [6: swapper/0: 1] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 0.739501] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_rid_adc_en rid en : (0) |
| [ 0.740596] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xcc) value(0x1f) |
| [ 0.741249] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00) |
| [ 0.741901] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00) |
| [ 0.742550] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00) |
| [ 0.743197] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00) |
| [ 0.744616] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x02, 0x04) |
| [ 0.744640] [0:irq/131-s2mu004: 1241] [MUIC] muic-detach S2MU004_FIRST_ATTACH start |
| [ 0.745290] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 0.745940] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 0, irq_num : 24 |
| [ 0.745961] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 3, irq_num: 24 |
| [ 0.752639] [6: swapper/0: 1] [MUIC] s2mu004_muic_set_rid_adc_en rid en : (1) |
| [ 0.753735] [6: swapper/0: 1] [MUIC] s2mu004_i2c_update_bit reg(0xcc) value(0x1d) |
| [ 0.769043] [0:irq/131-s2mu004: 1241] [MUIC] dev[1:0x00, 2:0x00, 3:0x00] |
| [ 0.769063] [0:irq/131-s2mu004: 1241] [MUIC] adc:0x1f, vbvolt:0x00, apple:0x04 |
| [ 0.769082] [0:irq/131-s2mu004: 1241] [MUIC] chg_type:0x00, vmid:0x01, dev_id:0x38 |
| [ 0.769101] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_control_rid_adc (Enable) |
| [ 0.856246] [6: swapper/0: 1] [MUIC] s2mu004_muic_probe : init adc : 0x0 |
| [ 0.856804] [6: swapper/0: 1] __sec_nfc_probe : start |
| [ 0.856839] [6: swapper/0: 1] sec_nfc_parse_dt: irq : 14, firm : 114 |
| [ 0.857012] [6: swapper/0: 1] __sec_nfc_probe : success |
| [ 0.857020] [6: swapper/0: 1] sec_nfc_i2c_probe : start |
| [ 0.857033] [6: swapper/0: 1] sec_nfc_i2c_probe: push interrupt no = 195 |
| [ 0.857179] [0:irq/195-sec-nfc: 1254] sec-nfc 7-0027: [NFC] Warning,irq-gpio state is low! |
| [ 0.857189] [7: swapper/0: 1] sec_nfc_i2c_probe , pvdd en: 1 |
| [ 0.857255] [7: swapper/0: 1] [ESE-P3] : Entry : spip3_dev_init |
| [ 0.857450] [7: swapper/0: 1] [ESE-P3] : spip3_probe chip select : 0 , bus number = 0 |
| [ 0.857468] [7: swapper/0: 1] [ESE-P3] : cs-gpio : 98 |
| [ 0.857468] [7: swapper/0: 1] : |
| [ 0.857481] [7: swapper/0: 1] [ESE-P3] : p3_parse_dt - getting vdd_1p8 error |
| [ 0.857496] [7: swapper/0: 1] [ESE-P3] : p3_parse_dt success vdd-gpio:110 |
| [ 0.857519] [7: swapper/0: 1] [ESE-P3] : p3_ldo_onoff: use external LDO 1 |
| [ 0.871790] [6: swapper/0: 1] [ESE-P3] : p3_ldo_onoff: use external LDO 0 |
| [ 0.872282] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_detect_first_attach : check adc at detach (0) |
| [ 0.872301] [0:irq/131-s2mu004: 1241] [MUIC] muic_pdic_notifier_attach_attached_dev: (52) |
| [ 0.872322] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: CMD=4, DATA=52 |
| [ 0.872341] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: notify done(0x0) |
| [ 0.872362] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_get_ccic_cable_state call, attached_dev : 70 |
| [ 0.872383] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_if_com_to_open |
| [ 0.872400] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_com_to_open |
| [ 0.873700] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_set_com_sw MANSW reg(0x0), just pass |
| [ 0.873720] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_handle_detach UNKNOWN |
| [ 0.873740] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_detach_charger |
| [ 0.873758] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_detach_attached_dev: (0) |
| [ 0.873778] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_detach_attached_dev: attached_dev of muic_notifier(70) != muic_data(0) |
| [ 0.873797] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_notify: CMD=0, DATA=70 |
| [ 0.873817] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_muic_notification: attach:0, cable_type:70 |
| [ 0.873837] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_muic_notification: Cable(70) Detached |
| [ 0.873863] [0:irq/131-s2mu004: 1241] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:00 sub2:00 sub3:46 |
| [ 0.873885] [0:irq/131-s2mu004: 1241] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 0.873906] [0:irq/131-s2mu004: 1241] [MUIC] muic_handle_dock_notification: ignore(70) |
| [ 0.873925] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_notify: notify done(0x0) |
| [ 0.873944] [0:irq/131-s2mu004: 1241] [MUIC] update_jig_state jig_state : 0 |
| [ 0.873962] [0:irq/131-s2mu004: 1241] [MUIC] muic_jig_uart_cb: MUIC uart type(0) |
| [ 0.873982] [0:irq/131-s2mu004: 1241] vbus_notifier_handle: (1)->(1) |
| [ 0.874003] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done |
| [ 0.874023] [0:irq/131-s2mu004: 1241] [MUIC] muic-adc_change S2MU004_FIRST_ATTACH start |
| [ 0.874682] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 0.875340] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : 31 |
| [ 0.875362] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 31 |
| [ 0.875381] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done |
| [ 0.876067] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00) |
| [ 0.876722] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00) |
| [ 0.877377] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00) |
| [ 0.878031] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00) |
| [ 0.879462] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x01, 0x04) |
| [ 0.879486] [0:irq/131-s2mu004: 1241] [MUIC] muic-attach S2MU004_FIRST_ATTACH start |
| [ 0.880146] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 0.880801] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : 23 |
| [ 0.880820] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 23 |
| [ 0.880839] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done |
| [ 0.880856] [0:irq/131-s2mu004: 1241] [MUIC] muic-adc_change S2MU004_FIRST_ATTACH start |
| [ 0.881510] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 0.882166] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 0, irq_num : 31 |
| [ 0.882187] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 31 |
| [ 0.882204] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done |
| [ 0.887635] [6: swapper/0: 1] [ESE-P3] : spip3_probe finished... |
| [ 0.887784] [6: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6 |
| [ 0.887794] [6: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| [ 0.887930] [6: swapper/0: 1] PPP generic driver version 2.4.2 |
| [ 0.888096] [6: swapper/0: 1] PPP BSD Compression module registered |
| [ 0.888108] [6: swapper/0: 1] PPP Deflate Compression module registered |
| [ 0.888130] [6: swapper/0: 1] PPP MPPE Compression module registered |
| [ 0.888142] [6: swapper/0: 1] NET: Registered protocol family 24 |
| [ 0.888161] [6: swapper/0: 1] slsi_dev_load: Loading Maxwell Wi-Fi driver |
| [ 0.888201] [6: swapper/0: 1] slsi_wlan_service_probe: WLAN service probe |
| [ 0.893155] [6: swapper/0: 1] sap_mlme_init: Registering SAP |
| [ 0.893173] [6: swapper/0: 1] sap_ma_init: Registering SAP |
| [ 0.893186] [6: swapper/0: 1] sap_dbg_init: Registering SAP |
| [ 0.893197] [6: swapper/0: 1] sap_test_init: Registering SAP |
| [ 0.893210] [6: swapper/0: 1] slsi_dev_load: --- Maxwell Wi-Fi driver loaded successfully --- |
| [ 0.893274] [6: swapper/0: 1] usbcore: registered new interface driver rtl8150 |
| [ 0.893308] [6: swapper/0: 1] usbcore: registered new interface driver r8152 |
| [ 0.893343] [6: swapper/0: 1] usbcore: registered new interface driver asix |
| [ 0.893374] [6: swapper/0: 1] usbcore: registered new interface driver ax88179_178a |
| [ 0.893406] [6: swapper/0: 1] usbcore: registered new interface driver cdc_ether |
| [ 0.893438] [6: swapper/0: 1] usbcore: registered new interface driver cdc_eem |
| [ 0.893468] [6: swapper/0: 1] usbcore: registered new interface driver smsc75xx |
| [ 0.893498] [6: swapper/0: 1] usbcore: registered new interface driver smsc95xx |
| [ 0.893534] [6: swapper/0: 1] usbcore: registered new interface driver net1080 |
| [ 0.893566] [6: swapper/0: 1] usbcore: registered new interface driver cdc_subset |
| [ 0.893599] [6: swapper/0: 1] usbcore: registered new interface driver zaurus |
| [ 0.893654] [6: swapper/0: 1] usbcore: registered new interface driver cdc_ncm |
| [ 0.893684] [6: swapper/0: 1] usbcore: registered new interface driver cdc_mbim |
| [ 0.894085] [6: swapper/0: 1] dwc3_exynos_probe: +++ |
| [ 0.894426] [6: swapper/0: 1] 13600000.usb supply vdd33 not found, using dummy regulator |
| [ 0.894487] [6: swapper/0: 1] 13600000.usb supply vdd10 not found, using dummy regulator |
| [ 0.894777] [6: swapper/0: 1] dwc3_probe: +++ |
| [ 0.894825] [6: swapper/0: 1] dwc3 13600000.dwc3: get qos_int_level from dwc3 node |
| [ 0.894851] [6: swapper/0: 1] dwc3 13600000.dwc3: dwc3_probe: dr_mode:3, suspend clock:0MHz |
| [ 0.895206] [6: swapper/0: 1] exynos_usbdrd_utmi_init: +++ |
| [ 0.896944] [6: swapper/0: 1] exynos_usbdrd_utmi_init: --- |
| [ 0.897003] [6: swapper/0: 1] dwc3 13600000.dwc3: dwc3_core_init: max speed:3, hibernation:0, nr_scratch:0 |
| [ 0.897048] [6: swapper/0: 1] 13600000.usb supply dwc3-vbus not found, using dummy regulator |
| [ 0.897838] [6: swapper/0: 1] dwc3 13600000.dwc3: Binding gadget dwc3-gadget |
| [ 0.897902] [6: swapper/0: 1] dwc3_probe: --- |
| [ 0.897930] [6: kworker/6:1: 1084] exynos-dwc3 13600000.usb: dwc3_exynos_runtime_suspend |
| [ 0.897959] [6: swapper/0: 1] dwc3_exynos_probe: --- |
| [ 0.898404] [6: swapper/0: 1] usbcore: registered new interface driver cdc_acm |
| [ 0.898414] [6: swapper/0: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 0.898450] [6: swapper/0: 1] usbcore: registered new interface driver usblp |
| [ 0.898486] [6: swapper/0: 1] usbcore: registered new interface driver cdc_wdm |
| [ 0.898522] [6: swapper/0: 1] usbcore: registered new interface driver usb-storage |
| [ 0.898584] [6: swapper/0: 1] usbcore: registered new interface driver usbserial |
| [ 0.898613] [6: swapper/0: 1] usbcore: registered new interface driver ftdi_sio |
| [ 0.898649] [6: swapper/0: 1] usbserial: USB Serial support registered for FTDI USB Serial Device |
| [ 0.898679] [6: swapper/0: 1] usbcore: registered new interface driver pl2303 |
| [ 0.898707] [6: swapper/0: 1] usbserial: USB Serial support registered for pl2303 |
| [ 0.899126] [6: swapper/0: 1] usb_notify: external_notifier_init |
| [ 0.899137] [6: swapper/0: 1] usb_notify: create_external_notify |
| [ 0.899358] [6: swapper/0: 1] mousedev: PS/2 mouse device common for all mice |
| [ 0.899742] [6: swapper/0: 1] [sec_input] touchkey_init: abov,a96t3x6 |
| [ 0.899948] [6: swapper/0: 1] abov_tk_probe++ |
| [ 0.899971] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] unable to get gpio_rst |
| [ 0.900017] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_parse_dt: [GPIO] en:123, int:29, scl:94, sda:93, vdd_io:0 |
| [ 0.900017] [6: swapper/0: 1] bringup:0, firmupcmd:32, abov_parse_dt: fw_name: abov/a96t326_a5y18.fw |
| [ 0.900116] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_pinctrl_configure ACTIVE |
| [ 0.900161] [6: swapper/0: 1] 10-0020 supply vddo not found, using dummy regulator |
| [ 0.900213] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] [TKEY] abov_power: iovdd reg enable OK |
| [ 0.900227] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] [TKEY] abov_power: on |
| [ 0.900243] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] vdd_en:1 |
| [ 0.900257] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] vio_reg:1 |
| [ 0.900270] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_power [TKEY] [sec_input] VDD get regulator |
| [ 0.900293] [6: swapper/0: 1] 10-0020 supply abov,lvdd not found, using dummy regulator |
| [ 0.900329] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_power [TKEY] [sec_input] Regulator already enabled |
| [ 1.056192] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] get_tk_fw_version : fw = 0x8, md = 0x61 |
| [ 1.056213] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_load_fw_kernel : fw = 0x8, md = 0x61 |
| [ 1.056228] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_load_fw_kernel : crc 0x78 0x1c |
| [ 1.056241] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] fw version read success (0) |
| [ 1.056396] [6: swapper/0: 1] input: sec_touchkey as /devices/platform/13880000.i2c/i2c-10/10-0020/input/input0 |
| [ 1.056576] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] no irq_flag |
| [ 1.056850] [6: swapper/0: 1] vbus_notifier_register: listener=1 register |
| [ 1.056867] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_touchkey_vbus_notification cmd=1, vbus_type=1 |
| [ 1.056883] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_touchkey_vbus_notification : detach |
| [ 1.056898] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_set_ta_status ta_connected 0 |
| [ 1.057336] [6: swapper/0: 1] abov-touchkey-3x6 10-0020: [sec_input] abov_tk_probe done |
| [ 1.057440] [6: swapper/0: 1] usbcore: registered new interface driver xpad |
| [ 1.057480] [6: swapper/0: 1] usbcore: registered new interface driver usb_acecad |
| [ 1.057513] [6: swapper/0: 1] usbcore: registered new interface driver aiptek |
| [ 1.057546] [6: swapper/0: 1] usbcore: registered new interface driver gtco |
| [ 1.057580] [6: swapper/0: 1] usbcore: registered new interface driver hanwang |
| [ 1.057613] [6: swapper/0: 1] usbcore: registered new interface driver kbtab |
| [ 1.057625] [6: swapper/0: 1] [sec_input] sec_ts_init |
| [ 1.057766] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe |
| [ 1.057784] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: Failed to get tsp-icid gpio |
| [ 1.057854] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: TSP_ID : 0 |
| [ 1.057879] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: lcdtype 0x00810543 |
| [ 1.057895] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: use tsp_ldo_en |
| [ 1.057912] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: Failed to get pressure-sensor property |
| [ 1.057934] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_parse_dt: i2c buffer limit: 256, lcd_id:810543, bringup:3, FW:tsp_sec/y661_a5y18.fw(2), id:132,-2, mis_cal:1 dex:0, gesture:0 pressure:(null) |
| [ 1.057953] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_tclm_parse_dt: tclm_level 2, sec_afe_base 261 |
| [ 1.058014] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: init resource |
| [ 1.058029] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE |
| [ 1.058084] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_power: on: avdd:on |
| [ 1.058536] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_wait_for_ready: 09, 00, 10, 00, 00, 00, 00, 00 [0] |
| [ 1.058549] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: power enable |
| [ 1.058841] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: TOUCH DEVICE ID : 53, 45, B6, 61, 00 |
| [ 1.084116] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: TOUCH STATUS : 20 || 00, 03, 00, 00 |
| [ 1.084385] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_calibration_report: count:14, pass count:14, fail count:0, status:0xA2 |
| [ 1.084400] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_firmware_update_on_probe: initial firmware update tsp_sec/y661_a5y18.fw, cal:A2 |
| [ 1.084417] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_firmware_update_on_probe: request firmware done! size = 137724 |
| [ 1.084432] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_bin: img_ver of bin = 9.38.1.9 |
| [ 1.084445] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_bin: core_ver of bin = 9.38.2.2 |
| [ 1.084458] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_bin: config_ver of bin = 9.38.1.3 |
| [ 1.084876] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_ic: IC Image version info : 9.38.1.9 |
| [ 1.085144] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_ic: IC Core version info : 9.38.2.2, |
| [ 1.085412] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_save_version_of_ic: IC config version info : 9.38.1.3 |
| [ 1.085428] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_firmware_update_on_probe: skip - fw update |
| [ 1.085666] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: AC, B6, 61 |
| [ 1.086151] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: nTX:F, nRX:1E, rY:4096, rX:4096 |
| [ 1.086318] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: STATUS : 20 |
| [ 1.086584] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: TOUCH STATUS : 00, 03, 00, 00 |
| [ 1.086786] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_read_information: Functions : 61 |
| [ 1.087171] [6: swapper/0: 1] input: sec_touchscreen as /devices/platform/13870000.i2c/i2c-9/9-0048/input/input1 |
| [ 1.087468] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: request_irq = 198 |
| [ 1.087613] [6: swapper/0: 1] trustedui_set_tsp_irq called![198] |
| [ 1.087624] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe[198] called! |
| [ 1.088038] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0 |
| [ 1.088500] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_check_custom_library: (2) A530, || 00, 04, 00, 05, || 10, 01 |
| [ 1.088515] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_check_custom_library: use SPONGE |
| [ 1.088528] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_set_custom_library: Sponge (0x00) |
| [ 1.088810] [6: swapper/0: 1] sec_ts 9-0048: [sec_input] sec_ts_probe: done |
| [ 1.091369] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable |
| [ 1.093553] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_time: 2017-01-28 08:26:32(0x40)AM |
| [ 1.094855] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_alarm: 2016-12-31 21:03:17(6) |
| [ 1.096222] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_time: 2017-01-28 08:26:32(0x40)AM |
| [ 1.096362] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: rtc core: registered s2mp-rtc as rtc0 |
| [ 1.096745] [7: swapper/0: 1] i2c /dev entries driver |
| [ 1.099038] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: registered as m2m1shot2 device |
| [ 1.099073] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: G2D version : 0x06110000 |
| [ 1.099099] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Fault handler is registered for 12c50000.sysmmu |
| [ 1.099196] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[0] c1 : 0 c0 : 0 mif :1014000 |
| [ 1.099209] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[1] c1 : 0 c0 : 0 mif :1014000 |
| [ 1.099221] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[2] c1 : 0 c0 : 0 mif :845000 |
| [ 1.099233] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[3] c1 : 0 c0 : 0 mif :845000 |
| [ 1.099244] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[4] c1 : 0 c0 : 0 mif :676000 |
| [ 1.099256] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: Skia QoS Table[5] c1 : 0 c0 : 0 mif :0 |
| [ 1.099272] [6: swapper/0: 1] exynos-g2d 12c20000.fimg2d: G2D with m2m1shot2 is probed successfully. |
| [ 1.099713] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: 'gate2' clock is not present |
| [ 1.099730] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: 'mux_user' clock is not present |
| [ 1.100206] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: Fault handler is registered for 12c50000.sysmmu |
| [ 1.100224] [6: swapper/0: 1] exynos5-scaler 12c10000.scaler: Driver probed successfully(version: 80044001(40002)) |
| [ 1.100983] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: decoder registered as /dev/video6 |
| [ 1.101086] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: encoder registered as /dev/video7 |
| [ 1.101179] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: secure decoder registered as /dev/video8 |
| [ 1.101262] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: secure encoder registered as /dev/video9 |
| [ 1.101514] [6: swapper/0: 1] s5p_mfc_probe:1229: QoS table[0] int : 267000, mif : 420000 |
| [ 1.101526] [6: swapper/0: 1] s5p_mfc_probe:1229: QoS table[1] int : 333000, mif : 546000 |
| [ 1.101536] [6: swapper/0: 1] s5p_mfc_probe:1229: QoS table[2] int : 533000, mif : 1352000 |
| [ 1.101553] [6: swapper/0: 1] s5p-mfc 12c30000.mfc0: Fault handler is registered for 12c50000.sysmmu |
| [ 1.102210] [6: swapper/0: 1] exynos-jpeg 12c00000.smfc: device ID is not declared: unique device |
| [ 1.102228] [6: swapper/0: 1] exynos-jpeg 12c00000.smfc: INT Min.Lock Freq. = 534000 |
| [ 1.102409] [5: swapper/0: 1] exynos-jpeg 12c00000.smfc: Fault handler is registered for 12c50000.sysmmu |
| [ 1.102713] [5: swapper/0: 1] exynos-jpeg 12c00000.smfc: Probed H/W Version: 23.02.2015 |
| [ 1.103735] [7: swapper/0: 1] fimc_is_probe:start(267224, 13592) |
| [ 1.103838] [7: swapper/0: 1] parse_gate_info: can't find fimc_is clk_gate_ctrl node |
| [ 1.103850] [7: swapper/0: 1] [ERR]fimc_is_parse_dt:252:can't parse clock gate info node |
| [ 1.103860] [7: swapper/0: 1] FIMC-IS chain configuration: 0 |
| [ 1.103876] [7: swapper/0: 1] [ERR]fimc_is_vender_dt:384:rear_second_sensor_id read is fail(-22) |
| [ 1.103886] [7: swapper/0: 1] skip_cal_loading not use(0) |
| [ 1.103895] [7: swapper/0: 1] [ERR]fimc_is_vender_dt:428:f_rom_power read is fail(-22) |
| [ 1.103904] [7: swapper/0: 1] f_rom_power not use(0) |
| [ 1.103917] [7: swapper/0: 1] fw_write: no property in the node. |
| [ 1.103924] [7: swapper/0: 1] fw_dump: no property in the node. |
| [ 1.103936] [7: swapper/0: 1] fw_write: no property in the node. |
| [ 1.103943] [7: swapper/0: 1] fw_dump: no property in the node. |
| [ 1.103959] [7: swapper/0: 1] [@]fimc_is_vender_dt: camera_num = 2 can't find camInfo_string node |
| [ 1.103971] [7: swapper/0: 1] [@]fimc_is_vender_dt: camera_num = 3 can't find camInfo_string node |
| [ 1.103983] [7: swapper/0: 1] [@]fimc_is_vender_dt: camera_num = 4 can't find camInfo_string node |
| [ 1.103996] [7: swapper/0: 1] fw_write: no property in the node. |
| [ 1.104006] [7: swapper/0: 1] fw_dump: no property in the node. |
| [ 1.104046] [7: swapper/0: 1] dvfs table[0] is default |
| [ 1.104062] [7: swapper/0: 1] default_hpg: no property in the node. |
| [ 1.104072] [7: swapper/0: 1] secure_front_int: no property in the node. |
| [ 1.104084] [7: swapper/0: 1] secure_front_cam: no property in the node. |
| [ 1.104095] [7: swapper/0: 1] secure_front_mif: no property in the node. |
| [ 1.104106] [7: swapper/0: 1] secure_front_i2c: no property in the node. |
| [ 1.104117] [7: swapper/0: 1] secure_front_hpg: no property in the node. |
| [ 1.104130] [7: swapper/0: 1] front2_preview_hpg: no property in the node. |
| [ 1.104143] [7: swapper/0: 1] front2_capture_hpg: no property in the node. |
| [ 1.104158] [7: swapper/0: 1] front2_video_hpg: no property in the node. |
| [ 1.104174] [7: swapper/0: 1] front2_video_capture_hpg: no property in the node. |
| [ 1.104190] [7: swapper/0: 1] front_preview_hpg: no property in the node. |
| [ 1.104205] [7: swapper/0: 1] front_capture_hpg: no property in the node. |
| [ 1.104224] [7: swapper/0: 1] front_video_hpg: no property in the node. |
| [ 1.104234] [7: swapper/0: 1] front_video_whd_int: no property in the node. |
| [ 1.104244] [7: swapper/0: 1] front_video_whd_cam: no property in the node. |
| [ 1.104254] [7: swapper/0: 1] front_video_whd_mif: no property in the node. |
| [ 1.104263] [7: swapper/0: 1] front_video_whd_i2c: no property in the node. |
| [ 1.104273] [7: swapper/0: 1] front_video_whd_hpg: no property in the node. |
| [ 1.104282] [7: swapper/0: 1] front_video_capture_int: no property in the node. |
| [ 1.104292] [7: swapper/0: 1] front_video_capture_cam: no property in the node. |
| [ 1.104301] [7: swapper/0: 1] front_video_capture_mif: no property in the node. |
| [ 1.104311] [7: swapper/0: 1] front_video_capture_i2c: no property in the node. |
| [ 1.104321] [7: swapper/0: 1] front_video_capture_hpg: no property in the node. |
| [ 1.104332] [7: swapper/0: 1] front_video_whd_capture_int: no property in the node. |
| [ 1.104341] [7: swapper/0: 1] front_video_whd_capture_cam: no property in the node. |
| [ 1.104351] [7: swapper/0: 1] front_video_whd_capture_mif: no property in the node. |
| [ 1.104360] [7: swapper/0: 1] front_video_whd_capture_i2c: no property in the node. |
| [ 1.104369] [7: swapper/0: 1] front_video_whd_capture_hpg: no property in the node. |
| [ 1.104386] [7: swapper/0: 1] front_vt1_hpg: no property in the node. |
| [ 1.104402] [7: swapper/0: 1] front_vt2_hpg: no property in the node. |
| [ 1.104420] [7: swapper/0: 1] front_vt4_hpg: no property in the node. |
| [ 1.104429] [7: swapper/0: 1] rear2_preview_fhd_int: no property in the node. |
| [ 1.104438] [7: swapper/0: 1] rear2_preview_fhd_cam: no property in the node. |
| [ 1.104447] [7: swapper/0: 1] rear2_preview_fhd_mif: no property in the node. |
| [ 1.104456] [7: swapper/0: 1] rear2_preview_fhd_i2c: no property in the node. |
| [ 1.104465] [7: swapper/0: 1] rear2_preview_fhd_hpg: no property in the node. |
| [ 1.104476] [7: swapper/0: 1] rear2_capture_int: no property in the node. |
| [ 1.104486] [7: swapper/0: 1] rear2_capture_cam: no property in the node. |
| [ 1.104496] [7: swapper/0: 1] rear2_capture_mif: no property in the node. |
| [ 1.104507] [7: swapper/0: 1] rear2_capture_i2c: no property in the node. |
| [ 1.104517] [7: swapper/0: 1] rear2_capture_hpg: no property in the node. |
| [ 1.104527] [7: swapper/0: 1] rear2_video_fhd_int: no property in the node. |
| [ 1.104535] [7: swapper/0: 1] rear2_video_fhd_cam: no property in the node. |
| [ 1.104544] [7: swapper/0: 1] rear2_video_fhd_mif: no property in the node. |
| [ 1.104553] [7: swapper/0: 1] rear2_video_fhd_i2c: no property in the node. |
| [ 1.104563] [7: swapper/0: 1] rear2_video_fhd_hpg: no property in the node. |
| [ 1.104572] [7: swapper/0: 1] rear2_video_fhd_capture_int: no property in the node. |
| [ 1.104581] [7: swapper/0: 1] rear2_video_fhd_capture_cam: no property in the node. |
| [ 1.104589] [7: swapper/0: 1] rear2_video_fhd_capture_mif: no property in the node. |
| [ 1.104599] [7: swapper/0: 1] rear2_video_fhd_capture_i2c: no property in the node. |
| [ 1.104608] [7: swapper/0: 1] rear2_video_fhd_capture_hpg: no property in the node. |
| [ 1.104623] [7: swapper/0: 1] rear_preview_fhd_hpg: no property in the node. |
| [ 1.104634] [7: swapper/0: 1] rear_preview_whd_int: no property in the node. |
| [ 1.104645] [7: swapper/0: 1] rear_preview_whd_cam: no property in the node. |
| [ 1.104655] [7: swapper/0: 1] rear_preview_whd_mif: no property in the node. |
| [ 1.104665] [7: swapper/0: 1] rear_preview_whd_i2c: no property in the node. |
| [ 1.104674] [7: swapper/0: 1] rear_preview_whd_hpg: no property in the node. |
| [ 1.104684] [7: swapper/0: 1] rear_preview_uhd_int: no property in the node. |
| [ 1.104693] [7: swapper/0: 1] rear_preview_uhd_cam: no property in the node. |
| [ 1.104702] [7: swapper/0: 1] rear_preview_uhd_mif: no property in the node. |
| [ 1.104711] [7: swapper/0: 1] rear_preview_uhd_i2c: no property in the node. |
| [ 1.104720] [7: swapper/0: 1] rear_preview_uhd_hpg: no property in the node. |
| [ 1.104730] [7: swapper/0: 1] rear_preview_uhd_60fps_int: no property in the node. |
| [ 1.104739] [7: swapper/0: 1] rear_preview_uhd_60fps_cam: no property in the node. |
| [ 1.104748] [7: swapper/0: 1] rear_preview_uhd_60fps_mif: no property in the node. |
| [ 1.104758] [7: swapper/0: 1] rear_preview_uhd_60fps_i2c: no property in the node. |
| [ 1.104768] [7: swapper/0: 1] rear_preview_uhd_60fps_hpg: no property in the node. |
| [ 1.104783] [7: swapper/0: 1] rear_capture_hpg: no property in the node. |
| [ 1.104798] [7: swapper/0: 1] rear_video_fhd_hpg: no property in the node. |
| [ 1.104808] [7: swapper/0: 1] rear_video_whd_int: no property in the node. |
| [ 1.104818] [7: swapper/0: 1] rear_video_whd_cam: no property in the node. |
| [ 1.104828] [7: swapper/0: 1] rear_video_whd_mif: no property in the node. |
| [ 1.104837] [7: swapper/0: 1] rear_video_whd_i2c: no property in the node. |
| [ 1.104847] [7: swapper/0: 1] rear_video_whd_hpg: no property in the node. |
| [ 1.104862] [7: swapper/0: 1] rear_video_uhd_hpg: no property in the node. |
| [ 1.104871] [7: swapper/0: 1] rear_video_uhd_60fps_int: no property in the node. |
| [ 1.104880] [7: swapper/0: 1] rear_video_uhd_60fps_cam: no property in the node. |
| [ 1.104890] [7: swapper/0: 1] rear_video_uhd_60fps_mif: no property in the node. |
| [ 1.104900] [7: swapper/0: 1] rear_video_uhd_60fps_i2c: no property in the node. |
| [ 1.104909] [7: swapper/0: 1] rear_video_uhd_60fps_hpg: no property in the node. |
| [ 1.104928] [7: swapper/0: 1] rear_video_fhd_capture_hpg: no property in the node. |
| [ 1.104937] [7: swapper/0: 1] rear_video_whd_capture_int: no property in the node. |
| [ 1.104947] [7: swapper/0: 1] rear_video_whd_capture_cam: no property in the node. |
| [ 1.104956] [7: swapper/0: 1] rear_video_whd_capture_mif: no property in the node. |
| [ 1.104965] [7: swapper/0: 1] rear_video_whd_capture_i2c: no property in the node. |
| [ 1.104974] [7: swapper/0: 1] rear_video_whd_capture_hpg: no property in the node. |
| [ 1.104991] [7: swapper/0: 1] rear_video_uhd_capture_hpg: no property in the node. |
| [ 1.105007] [7: swapper/0: 1] dual_preview_hpg: no property in the node. |
| [ 1.105022] [7: swapper/0: 1] dual_capture_hpg: no property in the node. |
| [ 1.105038] [7: swapper/0: 1] dual_video_hpg: no property in the node. |
| [ 1.105048] [7: swapper/0: 1] dual_video_capture_int: no property in the node. |
| [ 1.105059] [7: swapper/0: 1] dual_video_capture_cam: no property in the node. |
| [ 1.105069] [7: swapper/0: 1] dual_video_capture_mif: no property in the node. |
| [ 1.105078] [7: swapper/0: 1] dual_video_capture_i2c: no property in the node. |
| [ 1.105088] [7: swapper/0: 1] dual_video_capture_hpg: no property in the node. |
| [ 1.105098] [7: swapper/0: 1] pip_preview_int: no property in the node. |
| [ 1.105107] [7: swapper/0: 1] pip_preview_cam: no property in the node. |
| [ 1.105117] [7: swapper/0: 1] pip_preview_mif: no property in the node. |
| [ 1.105126] [7: swapper/0: 1] pip_preview_i2c: no property in the node. |
| [ 1.105135] [7: swapper/0: 1] pip_preview_hpg: no property in the node. |
| [ 1.105145] [7: swapper/0: 1] pip_capture_int: no property in the node. |
| [ 1.105154] [7: swapper/0: 1] pip_capture_cam: no property in the node. |
| [ 1.105163] [7: swapper/0: 1] pip_capture_mif: no property in the node. |
| [ 1.105172] [7: swapper/0: 1] pip_capture_i2c: no property in the node. |
| [ 1.105182] [7: swapper/0: 1] pip_capture_hpg: no property in the node. |
| [ 1.105191] [7: swapper/0: 1] pip_video_int: no property in the node. |
| [ 1.105200] [7: swapper/0: 1] pip_video_cam: no property in the node. |
| [ 1.105208] [7: swapper/0: 1] pip_video_mif: no property in the node. |
| [ 1.105217] [7: swapper/0: 1] pip_video_i2c: no property in the node. |
| [ 1.105227] [7: swapper/0: 1] pip_video_hpg: no property in the node. |
| [ 1.105236] [7: swapper/0: 1] pip_video_capture_int: no property in the node. |
| [ 1.105244] [7: swapper/0: 1] pip_video_capture_cam: no property in the node. |
| [ 1.105253] [7: swapper/0: 1] pip_video_capture_mif: no property in the node. |
| [ 1.105262] [7: swapper/0: 1] pip_video_capture_i2c: no property in the node. |
| [ 1.105271] [7: swapper/0: 1] pip_video_capture_hpg: no property in the node. |
| [ 1.105287] [7: swapper/0: 1] preview_high_speed_fps_hpg: no property in the node. |
| [ 1.105297] [7: swapper/0: 1] video_high_speed_60fps_swvdis_int: no property in the node. |
| [ 1.105309] [7: swapper/0: 1] video_high_speed_60fps_swvdis_cam: no property in the node. |
| [ 1.105318] [7: swapper/0: 1] video_high_speed_60fps_swvdis_mif: no property in the node. |
| [ 1.105328] [7: swapper/0: 1] video_high_speed_60fps_swvdis_i2c: no property in the node. |
| [ 1.105337] [7: swapper/0: 1] video_high_speed_60fps_swvdis_hpg: no property in the node. |
| [ 1.105354] [7: swapper/0: 1] video_high_speed_60fps_hpg: no property in the node. |
| [ 1.105372] [7: swapper/0: 1] video_high_speed_120fps_hpg: no property in the node. |
| [ 1.105384] [7: swapper/0: 1] video_high_speed_240fps_int: no property in the node. |
| [ 1.105394] [7: swapper/0: 1] video_high_speed_240fps_cam: no property in the node. |
| [ 1.105405] [7: swapper/0: 1] video_high_speed_240fps_mif: no property in the node. |
| [ 1.105415] [7: swapper/0: 1] video_high_speed_240fps_i2c: no property in the node. |
| [ 1.105424] [7: swapper/0: 1] video_high_speed_240fps_hpg: no property in the node. |
| [ 1.105434] [7: swapper/0: 1] ext_rear_int: no property in the node. |
| [ 1.105443] [7: swapper/0: 1] ext_rear_cam: no property in the node. |
| [ 1.105453] [7: swapper/0: 1] ext_rear_mif: no property in the node. |
| [ 1.105462] [7: swapper/0: 1] ext_rear_i2c: no property in the node. |
| [ 1.105471] [7: swapper/0: 1] ext_rear_hpg: no property in the node. |
| [ 1.105479] [7: swapper/0: 1] ext_front_int: no property in the node. |
| [ 1.105488] [7: swapper/0: 1] ext_front_cam: no property in the node. |
| [ 1.105497] [7: swapper/0: 1] ext_front_mif: no property in the node. |
| [ 1.105506] [7: swapper/0: 1] ext_front_i2c: no property in the node. |
| [ 1.105516] [7: swapper/0: 1] ext_front_hpg: no property in the node. |
| [ 1.105532] [7: swapper/0: 1] max_hpg: no property in the node. |
| [ 1.105543] [7: swapper/0: 1] (null)int: no property in the node. |
| [ 1.105552] [7: swapper/0: 1] (null)cam: no property in the node. |
| [ 1.105562] [7: swapper/0: 1] (null)mif: no property in the node. |
| [ 1.105571] [7: swapper/0: 1] (null)i2c: no property in the node. |
| [ 1.105580] [7: swapper/0: 1] (null)hpg: no property in the node. |
| [ 1.105587] [7: swapper/0: 1] dvfs table[1] is DVFS table for HAL3 |
| [ 1.105599] [7: swapper/0: 1] default_hpg: no property in the node. |
| [ 1.105609] [7: swapper/0: 1] secure_front_int: no property in the node. |
| [ 1.105617] [7: swapper/0: 1] secure_front_cam: no property in the node. |
| [ 1.105628] [7: swapper/0: 1] secure_front_mif: no property in the node. |
| [ 1.105638] [7: swapper/0: 1] secure_front_i2c: no property in the node. |
| [ 1.105647] [7: swapper/0: 1] secure_front_hpg: no property in the node. |
| [ 1.105660] [7: swapper/0: 1] front2_preview_hpg: no property in the node. |
| [ 1.105675] [7: swapper/0: 1] front2_capture_hpg: no property in the node. |
| [ 1.105690] [7: swapper/0: 1] front2_video_hpg: no property in the node. |
| [ 1.105706] [7: swapper/0: 1] front2_video_capture_hpg: no property in the node. |
| [ 1.105721] [7: swapper/0: 1] front_preview_hpg: no property in the node. |
| [ 1.105734] [7: swapper/0: 1] front_capture_hpg: no property in the node. |
| [ 1.105748] [7: swapper/0: 1] front_video_hpg: no property in the node. |
| [ 1.105759] [7: swapper/0: 1] front_video_whd_int: no property in the node. |
| [ 1.105768] [7: swapper/0: 1] front_video_whd_cam: no property in the node. |
| [ 1.105778] [7: swapper/0: 1] front_video_whd_mif: no property in the node. |
| [ 1.105787] [7: swapper/0: 1] front_video_whd_i2c: no property in the node. |
| [ 1.105797] [7: swapper/0: 1] front_video_whd_hpg: no property in the node. |
| [ 1.105806] [7: swapper/0: 1] front_video_capture_int: no property in the node. |
| [ 1.105815] [7: swapper/0: 1] front_video_capture_cam: no property in the node. |
| [ 1.105824] [7: swapper/0: 1] front_video_capture_mif: no property in the node. |
| [ 1.105834] [7: swapper/0: 1] front_video_capture_i2c: no property in the node. |
| [ 1.105844] [7: swapper/0: 1] front_video_capture_hpg: no property in the node. |
| [ 1.105855] [7: swapper/0: 1] front_video_whd_capture_int: no property in the node. |
| [ 1.105866] [7: swapper/0: 1] front_video_whd_capture_cam: no property in the node. |
| [ 1.105875] [7: swapper/0: 1] front_video_whd_capture_mif: no property in the node. |
| [ 1.105885] [7: swapper/0: 1] front_video_whd_capture_i2c: no property in the node. |
| [ 1.105895] [7: swapper/0: 1] front_video_whd_capture_hpg: no property in the node. |
| [ 1.105911] [7: swapper/0: 1] front_vt1_hpg: no property in the node. |
| [ 1.105928] [7: swapper/0: 1] front_vt2_hpg: no property in the node. |
| [ 1.105944] [7: swapper/0: 1] front_vt4_hpg: no property in the node. |
| [ 1.105954] [7: swapper/0: 1] rear2_preview_fhd_int: no property in the node. |
| [ 1.105963] [7: swapper/0: 1] rear2_preview_fhd_cam: no property in the node. |
| [ 1.105974] [7: swapper/0: 1] rear2_preview_fhd_mif: no property in the node. |
| [ 1.105983] [7: swapper/0: 1] rear2_preview_fhd_i2c: no property in the node. |
| [ 1.105993] [7: swapper/0: 1] rear2_preview_fhd_hpg: no property in the node. |
| [ 1.106002] [7: swapper/0: 1] rear2_capture_int: no property in the node. |
| [ 1.106012] [7: swapper/0: 1] rear2_capture_cam: no property in the node. |
| [ 1.106021] [7: swapper/0: 1] rear2_capture_mif: no property in the node. |
| [ 1.106031] [7: swapper/0: 1] rear2_capture_i2c: no property in the node. |
| [ 1.106040] [7: swapper/0: 1] rear2_capture_hpg: no property in the node. |
| [ 1.106049] [7: swapper/0: 1] rear2_video_fhd_int: no property in the node. |
| [ 1.106059] [7: swapper/0: 1] rear2_video_fhd_cam: no property in the node. |
| [ 1.106068] [7: swapper/0: 1] rear2_video_fhd_mif: no property in the node. |
| [ 1.106077] [7: swapper/0: 1] rear2_video_fhd_i2c: no property in the node. |
| [ 1.106086] [7: swapper/0: 1] rear2_video_fhd_hpg: no property in the node. |
| [ 1.106096] [7: swapper/0: 1] rear2_video_fhd_capture_int: no property in the node. |
| [ 1.106105] [7: swapper/0: 1] rear2_video_fhd_capture_cam: no property in the node. |
| [ 1.106115] [7: swapper/0: 1] rear2_video_fhd_capture_mif: no property in the node. |
| [ 1.106124] [7: swapper/0: 1] rear2_video_fhd_capture_i2c: no property in the node. |
| [ 1.106133] [7: swapper/0: 1] rear2_video_fhd_capture_hpg: no property in the node. |
| [ 1.106147] [7: swapper/0: 1] rear_preview_fhd_hpg: no property in the node. |
| [ 1.106157] [7: swapper/0: 1] rear_preview_whd_int: no property in the node. |
| [ 1.106166] [7: swapper/0: 1] rear_preview_whd_cam: no property in the node. |
| [ 1.106175] [7: swapper/0: 1] rear_preview_whd_mif: no property in the node. |
| [ 1.106183] [7: swapper/0: 1] rear_preview_whd_i2c: no property in the node. |
| [ 1.106192] [7: swapper/0: 1] rear_preview_whd_hpg: no property in the node. |
| [ 1.106202] [7: swapper/0: 1] rear_preview_uhd_int: no property in the node. |
| [ 1.106210] [7: swapper/0: 1] rear_preview_uhd_cam: no property in the node. |
| [ 1.106219] [7: swapper/0: 1] rear_preview_uhd_mif: no property in the node. |
| [ 1.106229] [7: swapper/0: 1] rear_preview_uhd_i2c: no property in the node. |
| [ 1.106238] [7: swapper/0: 1] rear_preview_uhd_hpg: no property in the node. |
| [ 1.106248] [7: swapper/0: 1] rear_preview_uhd_60fps_int: no property in the node. |
| [ 1.106258] [7: swapper/0: 1] rear_preview_uhd_60fps_cam: no property in the node. |
| [ 1.106267] [7: swapper/0: 1] rear_preview_uhd_60fps_mif: no property in the node. |
| [ 1.106276] [7: swapper/0: 1] rear_preview_uhd_60fps_i2c: no property in the node. |
| [ 1.106285] [7: swapper/0: 1] rear_preview_uhd_60fps_hpg: no property in the node. |
| [ 1.106299] [7: swapper/0: 1] rear_capture_hpg: no property in the node. |
| [ 1.106315] [7: swapper/0: 1] rear_video_fhd_hpg: no property in the node. |
| [ 1.106324] [7: swapper/0: 1] rear_video_whd_int: no property in the node. |
| [ 1.106334] [7: swapper/0: 1] rear_video_whd_cam: no property in the node. |
| [ 1.106344] [7: swapper/0: 1] rear_video_whd_mif: no property in the node. |
| [ 1.106353] [7: swapper/0: 1] rear_video_whd_i2c: no property in the node. |
| [ 1.106362] [7: swapper/0: 1] rear_video_whd_hpg: no property in the node. |
| [ 1.106377] [7: swapper/0: 1] rear_video_uhd_hpg: no property in the node. |
| [ 1.106387] [7: swapper/0: 1] rear_video_uhd_60fps_int: no property in the node. |
| [ 1.106397] [7: swapper/0: 1] rear_video_uhd_60fps_cam: no property in the node. |
| [ 1.106406] [7: swapper/0: 1] rear_video_uhd_60fps_mif: no property in the node. |
| [ 1.106415] [7: swapper/0: 1] rear_video_uhd_60fps_i2c: no property in the node. |
| [ 1.106424] [7: swapper/0: 1] rear_video_uhd_60fps_hpg: no property in the node. |
| [ 1.106441] [7: swapper/0: 1] rear_video_fhd_capture_hpg: no property in the node. |
| [ 1.106451] [7: swapper/0: 1] rear_video_whd_capture_int: no property in the node. |
| [ 1.106460] [7: swapper/0: 1] rear_video_whd_capture_cam: no property in the node. |
| [ 1.106469] [7: swapper/0: 1] rear_video_whd_capture_mif: no property in the node. |
| [ 1.106479] [7: swapper/0: 1] rear_video_whd_capture_i2c: no property in the node. |
| [ 1.106489] [7: swapper/0: 1] rear_video_whd_capture_hpg: no property in the node. |
| [ 1.106508] [7: swapper/0: 1] rear_video_uhd_capture_hpg: no property in the node. |
| [ 1.106524] [7: swapper/0: 1] dual_preview_hpg: no property in the node. |
| [ 1.106539] [7: swapper/0: 1] dual_capture_hpg: no property in the node. |
| [ 1.106556] [7: swapper/0: 1] dual_video_hpg: no property in the node. |
| [ 1.106565] [7: swapper/0: 1] dual_video_capture_int: no property in the node. |
| [ 1.106575] [7: swapper/0: 1] dual_video_capture_cam: no property in the node. |
| [ 1.106584] [7: swapper/0: 1] dual_video_capture_mif: no property in the node. |
| [ 1.106593] [7: swapper/0: 1] dual_video_capture_i2c: no property in the node. |
| [ 1.106602] [7: swapper/0: 1] dual_video_capture_hpg: no property in the node. |
| [ 1.106611] [7: swapper/0: 1] pip_preview_int: no property in the node. |
| [ 1.106620] [7: swapper/0: 1] pip_preview_cam: no property in the node. |
| [ 1.106629] [7: swapper/0: 1] pip_preview_mif: no property in the node. |
| [ 1.106638] [7: swapper/0: 1] pip_preview_i2c: no property in the node. |
| [ 1.106646] [7: swapper/0: 1] pip_preview_hpg: no property in the node. |
| [ 1.106655] [7: swapper/0: 1] pip_capture_int: no property in the node. |
| [ 1.106664] [7: swapper/0: 1] pip_capture_cam: no property in the node. |
| [ 1.106672] [7: swapper/0: 1] pip_capture_mif: no property in the node. |
| [ 1.106681] [7: swapper/0: 1] pip_capture_i2c: no property in the node. |
| [ 1.106690] [7: swapper/0: 1] pip_capture_hpg: no property in the node. |
| [ 1.106699] [7: swapper/0: 1] pip_video_int: no property in the node. |
| [ 1.106708] [7: swapper/0: 1] pip_video_cam: no property in the node. |
| [ 1.106717] [7: swapper/0: 1] pip_video_mif: no property in the node. |
| [ 1.106726] [7: swapper/0: 1] pip_video_i2c: no property in the node. |
| [ 1.106735] [7: swapper/0: 1] pip_video_hpg: no property in the node. |
| [ 1.106744] [7: swapper/0: 1] pip_video_capture_int: no property in the node. |
| [ 1.106753] [7: swapper/0: 1] pip_video_capture_cam: no property in the node. |
| [ 1.106762] [7: swapper/0: 1] pip_video_capture_mif: no property in the node. |
| [ 1.106771] [7: swapper/0: 1] pip_video_capture_i2c: no property in the node. |
| [ 1.106780] [7: swapper/0: 1] pip_video_capture_hpg: no property in the node. |
| [ 1.106796] [7: swapper/0: 1] preview_high_speed_fps_hpg: no property in the node. |
| [ 1.106806] [7: swapper/0: 1] video_high_speed_60fps_swvdis_int: no property in the node. |
| [ 1.106815] [7: swapper/0: 1] video_high_speed_60fps_swvdis_cam: no property in the node. |
| [ 1.106825] [7: swapper/0: 1] video_high_speed_60fps_swvdis_mif: no property in the node. |
| [ 1.106834] [7: swapper/0: 1] video_high_speed_60fps_swvdis_i2c: no property in the node. |
| [ 1.106843] [7: swapper/0: 1] video_high_speed_60fps_swvdis_hpg: no property in the node. |
| [ 1.106859] [7: swapper/0: 1] video_high_speed_60fps_hpg: no property in the node. |
| [ 1.106876] [7: swapper/0: 1] video_high_speed_120fps_hpg: no property in the node. |
| [ 1.106886] [7: swapper/0: 1] video_high_speed_240fps_int: no property in the node. |
| [ 1.106895] [7: swapper/0: 1] video_high_speed_240fps_cam: no property in the node. |
| [ 1.106904] [7: swapper/0: 1] video_high_speed_240fps_mif: no property in the node. |
| [ 1.106913] [7: swapper/0: 1] video_high_speed_240fps_i2c: no property in the node. |
| [ 1.106923] [7: swapper/0: 1] video_high_speed_240fps_hpg: no property in the node. |
| [ 1.106931] [7: swapper/0: 1] ext_rear_int: no property in the node. |
| [ 1.106939] [7: swapper/0: 1] ext_rear_cam: no property in the node. |
| [ 1.106948] [7: swapper/0: 1] ext_rear_mif: no property in the node. |
| [ 1.106957] [7: swapper/0: 1] ext_rear_i2c: no property in the node. |
| [ 1.106966] [7: swapper/0: 1] ext_rear_hpg: no property in the node. |
| [ 1.106975] [7: swapper/0: 1] ext_front_int: no property in the node. |
| [ 1.106984] [7: swapper/0: 1] ext_front_cam: no property in the node. |
| [ 1.106992] [7: swapper/0: 1] ext_front_mif: no property in the node. |
| [ 1.107000] [7: swapper/0: 1] ext_front_i2c: no property in the node. |
| [ 1.107010] [7: swapper/0: 1] ext_front_hpg: no property in the node. |
| [ 1.107026] [7: swapper/0: 1] max_hpg: no property in the node. |
| [ 1.107034] [7: swapper/0: 1] (null)int: no property in the node. |
| [ 1.107043] [7: swapper/0: 1] (null)cam: no property in the node. |
| [ 1.107052] [7: swapper/0: 1] (null)mif: no property in the node. |
| [ 1.107060] [7: swapper/0: 1] (null)i2c: no property in the node. |
| [ 1.107068] [7: swapper/0: 1] (null)hpg: no property in the node. |
| [ 1.109462] [7: swapper/0: 1] fimc_is_init_mem - ION |
| [ 1.116625] [7: swapper/0: 1] [RSC] Internal memory size (aligned) : 042265e0 |
| [ 1.117978] [7: swapper/0: 1] [RSC] Kernel virtual for library: 00000000 |
| [ 1.117988] [7: swapper/0: 1] [RSC] Kernel virtual for debug: ffffffc07f180000 |
| [ 1.117997] [7: swapper/0: 1] [RSC] fimc_is_init_mem done |
| [ 1.118012] [7: swapper/0: 1] [RSC] fimc_is_resourcemgr_probe(0) |
| [ 1.118092] [7: swapper/0: 1] fimc-is is created |
| [ 1.118109] [7: swapper/0: 1] isfw-msg is created |
| [ 1.118152] [7: swapper/0: 1] Success to create sys/devices/svc svc : 0xffffffc07f51b680 |
| [ 1.118167] [7: swapper/0: 1] Success to create sys/devices/svc/Camera : 0xffffffc07f51b700 |
| [ 1.118602] [7: swapper/0: 1] [@][VID] exynos-fimc-is-30s(110) is created |
| [ 1.118745] [7: swapper/0: 1] [@][VID] exynos-fimc-is-30c(111) is created |
| [ 1.118840] [7: swapper/0: 1] [@][VID] exynos-fimc-is-30p(112) is created |
| [ 1.118928] [7: swapper/0: 1] [@][VID] exynos-fimc-is-31s(120) is created |
| [ 1.119013] [7: swapper/0: 1] [@][VID] exynos-fimc-is-31c(121) is created |
| [ 1.119095] [7: swapper/0: 1] [@][VID] exynos-fimc-is-31p(122) is created |
| [ 1.119183] [7: swapper/0: 1] [@][VID] exynos-fimc-is-i0s(130) is created |
| [ 1.119269] [7: swapper/0: 1] [@][VID] exynos-fimc-is-i0c(131) is created |
| [ 1.119352] [7: swapper/0: 1] [@][VID] exynos-fimc-is-i0p(132) is created |
| [ 1.119451] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m0s(160) is created |
| [ 1.119532] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m1s(161) is created |
| [ 1.119726] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m0p(170) is created |
| [ 1.119820] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m1p(171) is created |
| [ 1.119913] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m2p(172) is created |
| [ 1.120002] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m3p(173) is created |
| [ 1.120086] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m4p(174) is created |
| [ 1.120167] [7: swapper/0: 1] [@][VID] exynos-fimc-is-m5p(175) is created |
| [ 1.120254] [7: swapper/0: 1] [@][VID] exynos-fimc-is-vra(180) is created |
| [ 1.120311] [7: swapper/0: 1] [@][ITFC][ID: 1] 3AA VA(0xffffff800e1c0000) |
| [ 1.120452] [7: swapper/0: 1] [@][ITFC][ID: 1] kvaddr for taaisp: 0xffffff800c08c000 |
| [ 1.120468] [7: swapper/0: 1] [@][ITFC][ID: 2] 3AA VA(0xffffff800e1e0000) |
| [ 1.120554] [7: swapper/0: 1] [@][ITFC][ID: 3] ISP VA(0xffffff800e200000) |
| [ 1.120629] [7: swapper/0: 1] [@][ITFC][ID:12] MCSC0 VA(0xffffff800e220000) |
| [ 1.120672] [7: swapper/0: 1] [@][ITFC][ID:15] VRA0 VA(0xffffff800e240000) |
| [ 1.120688] [7: swapper/0: 1] [@][ITFC][ID:15] VRA1 VA(0xffffff800e260000) |
| [ 1.120729] [7: swapper/0: 1] [@][ITFC][ID:15] kvaddr for vra: 0xffffff800c58d000 |
| [ 1.120741] [7: swapper/0: 1] [@][HW:3AA0]probe done |
| [ 1.120751] [7: swapper/0: 1] [@][HW:3AA1]probe done |
| [ 1.120760] [7: swapper/0: 1] [@][HW:ISP0]probe done |
| [ 1.120771] [7: swapper/0: 1] [@][HW:MCS0]probe done |
| [ 1.120783] [7: swapper/0: 1] [@][HW:VRA]probe done |
| [ 1.120806] [7: swapper/0: 1] [@][HW:3AA0]sfr dump memory (V/P/S):(ffffffc07f660000/00000000ff660000/0x10000)[0x14450000~0x1445FFFF] |
| [ 1.120828] [7: swapper/0: 1] [@][HW:3AA1]sfr dump memory (V/P/S):(ffffffc07f670000/00000000ff670000/0x10000)[0x14460000~0x1446FFFF] |
| [ 1.120848] [7: swapper/0: 1] [@][HW:ISP0]sfr dump memory (V/P/S):(ffffffc07f580000/00000000ff580000/0x10000)[0x14600000~0x1460FFFF] |
| [ 1.120866] [7: swapper/0: 1] [@][HW:MCS0]sfr dump memory (V/P/S):(ffffffc07f590000/00000000ff590000/0x10000)[0x14640000~0x1464FFFF] |
| [ 1.120885] [7: swapper/0: 1] [@][HW:VRA]sfr dump memory (V/P/S):(ffffffc07f0a0000/00000000ff0a0000/0x10000)[0x14610000~0x1461FFFF] |
| [ 1.120903] [7: swapper/0: 1] [@][HW:VRA]sfr B dump memory (V/P/S):(ffffffc07f0b0000/00000000ff0b0000/0x10000)[0x14620000~0x1462FFFF] |
| [ 1.120919] [7: swapper/0: 1] exynos-fimc-is 14440000.fimc_is: Fault handler is registered for 14730000.sysmmu |
| [ 1.120932] [7: swapper/0: 1] exynos-fimc-is 14440000.fimc_is: Fault handler is registered for 14760000.sysmmu |
| [ 1.120947] [7: swapper/0: 1] exynos-fimc-is 14440000.fimc_is: Fault handler is registered for 14540000.sysmmu |
| [ 1.120992] [7: swapper/0: 1] [ERR]fimc_is_probe:1570:pinctrl_lookup_state failed!!! |
| [ 1.120992] [7: swapper/0: 1] |
| [ 1.121005] [7: swapper/0: 1] fimc_is_probe:end |
| [ 1.121698] [7: swapper/0: 1] sensor_module_2p6_probe use_pdaf(1) |
| [ 1.121713] [7: swapper/0: 1] sensor_module_2p6_probe exist_actuator(1) |
| [ 1.121756] [7: swapper/0: 1] i2c_ch dt parsing skipped |
| [ 1.121765] [7: swapper/0: 1] i2c_addr dt parsing skipped |
| [ 1.121799] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-2P6 fimc-is_sensor_2p6@5A: sensor_module_2p6_power_setpin_with_af E v4 |
| [ 1.121866] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-2P6 fimc-is_sensor_2p6@5A: failed to get gpio_cam_avdd_en |
| [ 1.121907] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-2P6 fimc-is_sensor_2p6@5A: sensor_module_2p6_power_setpin_with_af X v4 |
| [ 1.122005] [7: swapper/0: 1] internal vc(1), type(1), offset(1) |
| [ 1.122018] [7: swapper/0: 1] sensor_module_2p6_probe pdta->id(0), module_enum id = 0 |
| [ 1.122035] [7: swapper/0: 1] sensor_module_2p6_probe done |
| [ 1.122436] [7: swapper/0: 1] i2c_ch dt parsing skipped |
| [ 1.122449] [7: swapper/0: 1] i2c_addr dt parsing skipped |
| [ 1.122484] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-3P8SP fimc-is_sensor_3p8sp@5A: sensor_module_3p8sp_power_setpin E v4 |
| [ 1.122557] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-3P8SP fimc-is_sensor_3p8sp@5A: sensor_module_3p8sp_power_setpin X v4 |
| [ 1.122659] [7: swapper/0: 1] sensor_module_3p8sp_probe pdta->id(1), module_enum id = 0 |
| [ 1.122677] [7: swapper/0: 1] sensor_module_3p8sp_probe done |
| [ 1.123046] [7: swapper/0: 1] sensor_module_sr846_probe exist_actuator(0) |
| [ 1.123086] [7: swapper/0: 1] i2c_ch dt parsing skipped |
| [ 1.123097] [7: swapper/0: 1] i2c_addr dt parsing skipped |
| [ 1.123125] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-SR846 fimc-is_sensor_sr846@42: sensor_module_sr846_power_setpin E v4 |
| [ 1.123170] [7: swapper/0: 1] FIMC-IS-SENSOR-MODULE-SR846 fimc-is_sensor_sr846@42: sensor_module_sr846_power_setpin X v4 |
| [ 1.123268] [7: swapper/0: 1] sensor_module_sr846_probe pdta->id(2), module_enum id = 0 |
| [ 1.123285] [7: swapper/0: 1] sensor_module_sr846_probe done |
| [ 1.123401] [7: swapper/0: 1] cis_2p6_probe sensor id 0 |
| [ 1.123410] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.123521] [7: swapper/0: 1] cis_3p8sp_probe sensor id 1 |
| [ 1.123532] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.123676] [7: swapper/0: 1] cis_sr846_probe sensor id 2 |
| [ 1.123688] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.123777] [7: swapper/0: 1] sensor_ak7372_actuator_probe sensor_id(0) actuator_place(0) |
| [ 1.123792] [7: swapper/0: 1] sensor_ak7372_actuator_probe done |
| [ 1.124054] [7: swapper/0: 1] place read is fail(-22) |
| [ 1.124065] [7: swapper/0: 1] flash_ktd2692_probe sensor_id(0) flash_place(0) |
| [ 1.124080] [7: swapper/0: 1] [ERR]flash_ktd2692_platform_probe:275:flash gpio probe fail(-22) |
| [ 1.124080] [7: swapper/0: 1] |
| [ 1.124101] [7: swapper/0: 1] FIMC-IS-SENSOR-FLASH-KTD2692-PLATFORM: probe of fimc-is-flash_ktd2692@0 failed with error -22 |
| [ 1.124191] [7: swapper/0: 1] fimc_is_eeprom_i2c 2-0050[0]: fimc_is_sensor_eeprom probed! |
| [ 1.124225] [7: swapper/0: 1] fimc_is_eeprom_i2c 2-0051[1]: fimc_is_sensor_eeprom probed! |
| [ 1.124602] [7: swapper/0: 1] sec-thermistor sec_thermistor@0: sec_therm_probe: fail to get iio channel |
| [ 1.124697] [7: swapper/0: 1] sec-thermistor sec_thermistor@6: sec_therm_probe: fail to get iio channel |
| [ 1.125810] [7: swapper/0: 1] s3c2410-wdt 10060000.watchdog: watchdog inactive, reset disabled, irq disabled |
| [ 1.126089] [7: swapper/0: 1] device-mapper: uevent: version 1.0.3 |
| [ 1.126300] [7: swapper/0: 1] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com |
| [ 1.126668] [6: swapper/0: 1] exynos_acme: Complete to initialize cpufreq-domain0 |
| [ 1.126685] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 cal-id : 0xb040003 |
| [ 1.126697] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 sibling cpus : 0-5 |
| [ 1.126709] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 boot freq = 1014000 kHz, resume freq = 1014000 kHz |
| [ 1.126723] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 max freq : 1586000 kHz, min freq : 449000 kHz |
| [ 1.126735] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 PM QoS max-class-id : 4, min-class-id : 3 |
| [ 1.126743] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 table size = 18 |
| [ 1.126753] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 4 1586000 kHz |
| [ 1.126761] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 5 1482000 kHz |
| [ 1.126770] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 6 1352000 kHz |
| [ 1.126778] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 7 1248000 kHz |
| [ 1.126785] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 8 1144000 kHz |
| [ 1.126792] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L 9 1014000 kHz |
| [ 1.126800] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L10 902000 kHz |
| [ 1.126808] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L11 839000 kHz |
| [ 1.126816] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L12 757000 kHz |
| [ 1.126823] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L13 676000 kHz |
| [ 1.126830] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L14 546000 kHz |
| [ 1.126838] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain0 : L15 449000 kHz |
| [ 1.126978] [6: swapper/0: 1] exynos_acme: Complete to initialize cpufreq-domain1 |
| [ 1.126986] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 cal-id : 0xb040002 |
| [ 1.126995] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 sibling cpus : 6-7 |
| [ 1.127003] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 boot freq = 1352000 kHz, resume freq = 1352000 kHz |
| [ 1.127013] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 max freq : 2184000 kHz, min freq : 936000 kHz |
| [ 1.127021] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 PM QoS max-class-id : 6, min-class-id : 5 |
| [ 1.127032] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 table size = 17 |
| [ 1.127040] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 3 2184000 kHz |
| [ 1.127048] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 4 2080000 kHz |
| [ 1.127055] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 5 1976000 kHz |
| [ 1.127062] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 6 1872000 kHz |
| [ 1.127069] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 7 1768000 kHz |
| [ 1.127076] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 8 1664000 kHz |
| [ 1.127083] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L 9 1560000 kHz |
| [ 1.127091] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L10 1352000 kHz |
| [ 1.127099] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L11 1144000 kHz |
| [ 1.127106] [6: swapper/0: 1] exynos_acme: CPUFREQ of domain1 : L12 936000 kHz |
| [ 1.127217] [6: swapper/0: 1] exynos_acme: CPUFREQ domain0 registered |
| [ 1.127395] [6: swapper/0: 1] exynos_acme: CPUFREQ domain1 registered |
| [ 1.128247] [6: swapper/0: 1] exynos_acme: Initialized Exynos cpufreq driver |
| [ 1.128790] [6: swapper/0: 1] Exynos cpuidle driver Initialized |
| [ 1.128829] [6: swapper/0: 1] Synopsys Designware Multimedia Card Interface Driver |
| [ 1.129349] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: supports-highspeed property is deprecated. |
| [ 1.129517] [6: swapper/0: 1] exynos_smu_get_pdevice: Found smu device ffffffc874735200 |
| [ 1.129524] [6: swapper/0: 1] exynos_smu_get_pdevice: Matching platform device ffffffc8748bec00 |
| [ 1.129557] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: IDMAC supports 64-bit address mode. |
| [ 1.129696] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: Using internal DMA controller. |
| [ 1.129722] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: FIFOTH: 0x 300f0030 |
| [ 1.129733] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: Version ID is 270a |
| [ 1.129875] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: DW MMC controller at irq 62,64 bit host data width,64 deep fifo |
| [ 1.143711] [7: swapper/0: 1] mmc_host mmc0: Bus speed (slot 0) = 24984375Hz (slot req 400000Hz, actual 390380HZ div = 32) |
| [ 1.159689] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: CMDQ host enabled!!! |
| [ 1.159727] [6: swapper/0: 1] dw_mci_transferred_cnt_init: trans_count: successed..... |
| [ 1.159735] [6: swapper/0: 1] dw_mci_debug_init: create debug_log sysfs : successed..... |
| [ 1.159744] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: host 0 debug On |
| [ 1.159752] [6: swapper/0: 1] dwmmc_exynos 13500000.dwmmc0: 1 slots initialized |
| [ 1.160049] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: supports-highspeed property is deprecated. |
| [ 1.160216] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: exynos_mmc_smu_get_vops: exynos-mmc-smu property not specified |
| [ 1.160225] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: exynos_mmc_smu_get_pdevice: exynos-mmc-smu property not specified |
| [ 1.160233] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: exynos_mmc_smu_get_dev: Host device doesn't have SMU or fail to get SMU |
| [ 1.160240] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: dw_mci_probe, Fail to get Access control device.(-19) |
| [ 1.160249] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: IDMAC supports 64-bit address mode. |
| [ 1.160398] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: Using internal DMA controller. |
| [ 1.160427] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: FIFOTH: 0x 300f0030 |
| [ 1.160435] [6: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: Version ID is 270a |
| [ 1.160663] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: DW MMC controller at irq 63,64 bit host data width,64 deep fifo |
| [ 1.160765] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: Slot quirk 'disable-wp' is deprecated |
| [ 1.188069] [7: swapper/0: 1] mmc_host mmc1: Bus speed (slot 0) = 24984375Hz (slot req 400000Hz, actual 390380HZ div = 32) |
| [ 1.203649] [7: swapper/0: 1] mmc1 skip mmc detect change |
| [ 1.203699] [7: swapper/0: 1] dw_mci_transferred_cnt_init: trans_count: successed..... |
| [ 1.203709] [7: swapper/0: 1] dw_mci_debug_init: create debug_log sysfs : successed..... |
| [ 1.203718] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: host 1 debug On |
| [ 1.203724] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: 1 slots initialized |
| [ 1.203769] [7: swapper/0: 1] dwmmc_exynos 13550000.dwmmc2: success to request irq for card detect. |
| [ 1.203777] [7: swapper/0: 1] wake enabled for irq 199 |
| [ 1.203840] [0: kworker/0:1: 1183] mmc_host mmc1: card inserted |
| [ 1.204277] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: max_current = <1500> |
| [ 1.204286] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: flash_current = <1200><12> |
| [ 1.204293] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: movie_current = <175><5> |
| [ 1.204300] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: factory_current = <175><5> |
| [ 1.204307] [7: swapper/0: 1] leds-ktd2692 leds_ktd2692: torch_current = <75><1> |
| [ 1.204314] [7: swapper/0: 1] ktd2692_probe : KTD2692_LED Probe |
| [ 1.204555] [7: swapper/0: 1] [LED] brightness : 100, lp_brightness : 100 |
| [ 1.204562] [7: swapper/0: 1] [LED] octa_color 0x1 |
| [ 1.204569] [7: swapper/0: 1] [LED] R ratio : 18 ratio_low : 2 |
| [ 1.204576] [7: swapper/0: 1] [LED] G ratio : 7 ratio_low : 1 |
| [ 1.204581] [7: swapper/0: 1] [LED] B ratio : 45 ratio_low : 3 |
| [ 1.204677] [7: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 1.205240] [3: kworker/u16:2: 241] mmc0: MAN_BKOPS_EN bit is not set |
| [ 1.205258] [3: kworker/u16:2: 241] mmc0: CMDQ supported: depth: 16 |
| [ 1.205268] [3: kworker/u16:2: 241] mmc0: cache barrier support 0 flush policy 0 |
| [ 1.205280] [3: kworker/u16:2: 241] mmc0: eMMC Firmware version: 3 |
| [ 1.205994] [7: swapper/0: 1] Successfully registered hid_synaptics_driver |
| [ 1.206094] [0: kworker/u16:2: 241] mmc0: STROBE ENHANCED enable |
| [ 1.206102] [7: swapper/0: 1] usbcore: registered new interface driver usbhid |
| [ 1.206111] [7: swapper/0: 1] usbhid: USB HID core driver |
| [ 1.206623] [6: swapper/0: 1] ashmem: initialized |
| [ 1.206924] [6: swapper/0: 1] sec_param_work_init: start |
| [ 1.206966] [6: swapper/0: 1] [NAD_BALANCER] Not support NAD balancer. |
| [ 1.207334] [6: swapper/0: 1] [sec_abc] sec_abc_init |
| [ 1.207531] [6: swapper/0: 1] [sec_abc] sec_abc_probe |
| [ 1.207545] [6: swapper/0: 1] sec_abc_probe: parse dt done |
| [ 1.207805] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: not used UM monitor |
| [ 1.207823] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 2093000Khz, 0uV |
| [ 1.207830] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 2002000Khz, 0uV |
| [ 1.207836] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1794000Khz, 0uV |
| [ 1.207842] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1539000Khz, 0uV |
| [ 1.207850] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1352000Khz, 0uV |
| [ 1.207855] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 1014000Khz, 0uV |
| [ 1.207861] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 845000Khz, 0uV |
| [ 1.207867] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 676000Khz, 0uV |
| [ 1.207875] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 546000Khz, 0uV |
| [ 1.207882] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: DEVFREQ : 420000Khz, 0uV |
| [ 1.207890] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: max_freq: 1794000Khz, get_max_freq: 1794000Khz |
| [ 1.207898] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: min_freq: 420000Khz, get_min_freq: 420000Khz |
| [ 1.207904] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: min_freq: 420000Khz, max_freq: 1794000Khz |
| [ 1.207909] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: current frequency: 0Khz |
| [ 1.208463] [6: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: Initial Frequency: 1794000, Initial Voltage: 0 |
| [ 1.209269] [7: kworker/u16:2: 241] mmc_host mmc0: Bus speed (slot 0) = 49968750Hz (slot req 52000000Hz, actual 49968750HZ div = 0) |
| [ 1.209410] [7: kworker/u16:2: 241] mmc_host mmc0: Bus speed (slot 0) = 399750000Hz (slot req 200000000Hz, actual 199875000HZ div = 1) |
| [ 1.209726] [7: kworker/u16:2: 241] mmc0: cmdq_host_alloc_tdl: desc_size: 4608 data_sz: 507904 slot-sz: 144 |
| [ 1.209726] [7: kworker/u16:2: 241] task_desc_len: 16 trans_desc_len 128 link_desc_len 128 |
| [ 1.210029] [7: kworker/u16:2: 241] mmc0: desc-base: 0xffffff80004fd000 trans-base: 0xffffff800e2ca000 |
| [ 1.210029] [7: kworker/u16:2: 241] desc_dma 0x8fd224000 trans_dma: 0x8fd280000 |
| [ 1.210046] [7: kworker/u16:2: 241] mmc0: CMDQ enabled on card |
| [ 1.210059] [7: kworker/u16:2: 241] mmc0: new HS400 MMC card at address 0001 |
| [ 1.210387] [7: kworker/u16:2: 241] mmcblk0: mmc0:0001 CKTM4R 58.2 GiB |
| [ 1.210520] [7: kworker/u16:2: 241] mmcblk0boot0: mmc0:0001 CKTM4R partition 1 4.00 MiB |
| [ 1.210653] [7: kworker/u16:2: 241] mmcblk0boot1: mmc0:0001 CKTM4R partition 2 4.00 MiB |
| [ 1.210829] [7: kworker/u16:2: 241] mmcblk0rpmb: mmc0:0001 CKTM4R partition 3 16.0 MiB |
| [ 1.212222] [6: kworker/u16:2: 241] Alternate GPT is invalid, using primary GPT. |
| [ 1.212257] [6: kworker/u16:2: 241] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 |
| [ 1.213477] [7: swapper/0: 1] exynos-devfreq 17000010.devfreq_mif: devfreq is initialized!! |
| [ 1.213560] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: not used UM monitor |
| [ 1.213575] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 533000Khz, 0uV |
| [ 1.213582] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 333000Khz, 0uV |
| [ 1.213589] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 267000Khz, 0uV |
| [ 1.213595] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 133000Khz, 0uV |
| [ 1.213602] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: DEVFREQ : 107000Khz, 0uV |
| [ 1.213608] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: max_freq: 533000Khz, get_max_freq: 533000Khz |
| [ 1.213614] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: min_freq: 107000Khz, get_min_freq: 107000Khz |
| [ 1.213622] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: min_freq: 107000Khz, max_freq: 533000Khz |
| [ 1.213680] [7: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: Initial Frequency: 533000, Initial Voltage: 0 |
| [ 1.214016] [6: swapper/0: 1] exynos-devfreq 17000020.devfreq_int: devfreq is initialized!! |
| [ 1.214080] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: This does not use acpm |
| [ 1.214091] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: not used UM monitor |
| [ 1.214106] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 267000Khz, 0uV |
| [ 1.214113] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 222000Khz, 0uV |
| [ 1.214120] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 167000Khz, 0uV |
| [ 1.214126] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: DEVFREQ : 80000Khz, 0uV |
| [ 1.214132] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: max_freq: 267000Khz, get_max_freq: 267000Khz |
| [ 1.214141] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: min_freq: 167000Khz, get_min_freq: 167000Khz |
| [ 1.214147] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: min_freq: 167000Khz, max_freq: 267000Khz |
| [ 1.214160] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: Initial Frequency: 267000, Initial Voltage: 0 |
| [ 1.214309] [6: swapper/0: 1] exynos-devfreq 17000040.devfreq_disp: devfreq is initialized!! |
| [ 1.214367] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: This does not use acpm |
| [ 1.214376] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: not used UM monitor |
| [ 1.214386] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 690000Khz, 0uV |
| [ 1.214392] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 680000Khz, 0uV |
| [ 1.214399] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 670000Khz, 0uV |
| [ 1.214405] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 660000Khz, 0uV |
| [ 1.214411] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: DEVFREQ : 650000Khz, 0uV |
| [ 1.214417] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: max_freq: 690000Khz, get_max_freq: 690000Khz |
| [ 1.214423] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: min_freq: 650000Khz, get_min_freq: 650000Khz |
| [ 1.214429] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: min_freq: 650000Khz, max_freq: 690000Khz |
| [ 1.214436] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: Initial Frequency: 690000, Initial Voltage: 0 |
| [ 1.214578] [6: swapper/0: 1] exynos-devfreq 17000050.devfreq_cam: devfreq is initialized!! |
| [ 1.214633] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: This does not use acpm |
| [ 1.214642] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: not used UM monitor |
| [ 1.214653] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 1180000Khz, 0uV |
| [ 1.214660] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 800000Khz, 0uV |
| [ 1.214666] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 590000Khz, 0uV |
| [ 1.214671] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: DEVFREQ : 394000Khz, 0uV |
| [ 1.214678] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: max_freq: 1180000Khz, get_max_freq: 1180000Khz |
| [ 1.214684] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: min_freq: 394000Khz, get_min_freq: 394000Khz |
| [ 1.214690] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: min_freq: 394000Khz, max_freq: 1180000Khz |
| [ 1.214696] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: Initial Frequency: 394000, Initial Voltage: 0 |
| [ 1.214932] [6: swapper/0: 1] exynos-devfreq 17000060.devfreq_aud: devfreq is initialized!! |
| [ 1.214997] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: This does not use acpm |
| [ 1.215007] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: not used UM monitor |
| [ 1.215025] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 267000Khz, 0uV |
| [ 1.215032] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 200000Khz, 0uV |
| [ 1.215038] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 100000Khz, 0uV |
| [ 1.215043] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: DEVFREQ : 50000Khz, 0uV |
| [ 1.215050] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: max_freq: 267000Khz, get_max_freq: 267000Khz |
| [ 1.215056] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: min_freq: 50000Khz, get_min_freq: 50000Khz |
| [ 1.215062] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: min_freq: 50000Khz, max_freq: 267000Khz |
| [ 1.215068] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: Initial Frequency: 267000, Initial Voltage: 0 |
| [ 1.215267] [6: swapper/0: 1] exynos-devfreq 17000070.devfreq_fsys: devfreq is initialized!! |
| [ 1.215430] [6: swapper/0: 1] battery_notifier_init |
| [ 1.215499] [6: swapper/0: 1] s2mu004_fuelgauge_init: S2MU004 Fuelgauge Init |
| [ 1.215660] [6: swapper/0: 1] s2mu004_fuelgauge_probe: S2MU004 Fuelgauge Driver Loading |
| [ 1.215750] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt : LOW TEMP LIMIT(100) |
| [ 1.215756] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt : SW VBAT_L recovery (3465)mV |
| [ 1.215824] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] fuelgauge->fg_num_age_step 5 |
| [ 1.215832] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 0, table3[0] 136, table4[0] 58, batcap[0] 18, accum[0] 07, soc_arr[0] 11052, ocv_arr[0] 44414 |
| [ 1.215838] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 1, table3[0] 136, table4[0] 58, batcap[0] 68, accum[0] 07, soc_arr[0] 11160, ocv_arr[0] 44414 |
| [ 1.215844] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 2, table3[0] 136, table4[0] 58, batcap[0] a0, accum[0] 07, soc_arr[0] 11285, ocv_arr[0] 44414 |
| [ 1.215850] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 3, table3[0] 136, table4[0] 58, batcap[0] d8, accum[0] 07, soc_arr[0] 11550, ocv_arr[0] 44416 |
| [ 1.215856] [6: swapper/0: 1] s2mu004_fuelgauge_parse_dt: [Long life] age_step = 4, table3[0] 136, table4[0] 58, batcap[0] d0, accum[0] 07, soc_arr[0] 12100, ocv_arr[0] 44414 |
| [ 1.216532] [6: swapper/0: 1] s2mu004_fuelgauge_probe: S2MU004 Fuelgauge revision: 2, reg 0x48 = 0x22 |
| [ 1.218429] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(00) 4F(00) current 4E(6b) 4F(10) |
| [ 1.221120] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36) |
| [ 1.234151] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8) |
| [ 1.234158] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539) |
| [ 1.234165] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (0), diff (0), FG_mode(0) |
| [ 1.236597] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 2f7), avg current (-186)mA |
| [ 1.236604] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 1.289465] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3866) |
| [ 1.289477] [6: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery) |
| [ 1.289484] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 0 |
| [ 1.289492] [6: swapper/0: 1] s2mu004_get_rawsoc: Fail to get psy (battery) |
| [ 1.296737] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864) |
| [ 1.297991] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123) |
| [ 1.298623] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01) |
| [ 1.299873] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 44b) |
| [ 1.299881] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-269)mA |
| [ 1.299889] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 1.299897] [6: swapper/0: 1] s2mu004_get_rawsoc: Fail to set psy (s2mu004-charger) |
| [ 1.320991] [6: swapper/0: 1] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xac, 0x05:0x7b, 0x06:0x4b, 0x07:0x04, 0x08:0x3a, 0x09:0x24, 0x0a:0x0c, 0x0b:0x1d, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 1.320999] [6: swapper/0: 1] s2mu004_init_regs: s2mu004 fuelgauge initialize |
| [ 1.326446] [6: swapper/0: 1] s2mu004_alert_init: irq_lvl(vbat:0xa, soc:0x10) |
| [ 1.328602] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_fuelgauge_fuelalert_init: irq_reg(1c00) irq(26) |
| [ 1.328625] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_fuelgauge_probe : fg_irq = 200 |
| [ 1.328747] [6: swapper/0: 1] wake enabled for irq 200 |
| [ 1.328753] [6: swapper/0: 1] s2mu004_fuelgauge_probe: S2MU004 Fuelgauge Driver Loaded |
| [ 1.329042] [6: swapper/0: 1] s2mu004_charger_probe:[BATT] S2MU004 Charger driver probe |
| [ 1.329149] [6: swapper/0: 1] s2mu004_charger_parse_dt: Charger switching FRQ is Empty |
| [ 1.329190] [6: swapper/0: 1] s2mu004_charger_parse_dt: battery,chg_float_voltage is 4350 |
| [ 1.329237] [6: swapper/0: 1] s2mu004_charger_parse_dt np NULL(sec-multi-charger) |
| [ 1.329242] [6: swapper/0: 1] s2mu004_charger_parse_dt DT file parsed succesfully, 0 |
| [ 1.329906] [6: swapper/0: 1] s2mu004_chg_init : DEV ID : 0x3 |
| [ 1.337015] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL17 : 0x1d |
| [ 1.339877] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL13 : 0x22 |
| [ 1.346528] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL12 : 0x12 |
| [ 1.348275] [6: swapper/0: 1] s2mu004_chg_init : S2MU004_CHG_CTRL7 : 0x46 |
| [ 1.376885] I[0: swapper/0: 0] random: nonblocking pool is initialized |
| [ 1.381732] [7: swapper/0: 1] s2mu004_test_read: 0x0a:0x03, 0x0b:0x00, 0x0c:0x03, 0x0d:0x01, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x1b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 1.381740] [7: swapper/0: 1] s2mu004_charger_probe:[BATT] S2MU004 charger driver loaded OK |
| [ 1.382223] [7: swapper/0: 1] exynos_get_idle_ip_index: Fail to find 120a0000.adc in idle-ip list with err -61 |
| [ 1.382265] [7: swapper/0: 1] 120a0000.adc supply vdd not found, using dummy regulator |
| [ 1.382545] [7: swapper/0: 1] exynos-adc 120a0000.adc: Probed successfully driver. |
| [ 1.383135] [7: swapper/0: 1] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 6.3 |
| [ 1.383316] [7: swapper/0: 1] Trustonic TEE: mobicore_probe: MobiCore t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 1.383649] [7: swapper/0: 1] Trustonic TEE: __mc_switch_core: <- cpu=0x00000001, active_cpu=0x00000000 |
| [ 1.383649] [7: swapper/0: 1] |
| [ 1.383709] [0: tee_fastcall: 1733] Trustonic TEE: mc_exec_core_switch: CoreSwap ok 0 -> 1 |
| [ 1.383903] [7: swapper/0: 1] Loading t-base-tui module. |
| [ 1.383909] [7: swapper/0: 1] t-base-EXYNOS64-Android-400A-V011-20170203_131128_25330_57476 |
| [ 1.384085] [5: swapper/0: 1] [VIB] zh915_init |
| [ 1.384215] [5: swapper/0: 1] ccic_notifier_init |
| [ 1.384227] [5: swapper/0: 1] ccic_notifier_init already registered |
| [ 1.384247] [5: swapper/0: 1] etspi_init |
| [ 1.384843] [5: swapper/0: 1] etspi_probe |
| [ 1.384880] [5: swapper/0: 1] etspi_parse_dt: sleepPin=130 |
| [ 1.384896] [5: swapper/0: 1] etspi_parse_dt: drdyPin=11 |
| [ 1.384915] [5: swapper/0: 1] etspi_parse_dt: ldo_pin=129 |
| [ 1.384927] [5: swapper/0: 1] etspi_parse_dt: chipid: ET510 |
| [ 1.384940] [5: swapper/0: 1] etspi_parse_dt: ldocontrol=1 |
| [ 1.384960] [5: swapper/0: 1] etspi_parse_dt is successful |
| [ 1.384974] [5: swapper/0: 1] etspi_platformInit |
| [ 1.385033] [5: swapper/0: 1] etspi_platformInit sleep value =0 |
| [ 1.385033] [5: swapper/0: 1] etspi_platformInit ldo en value =0 |
| [ 1.385055] [5: swapper/0: 1] etspi_platformInit successful status=0 |
| [ 1.385251] [7: swapper/0: 1] etspi_probe is successful |
| [ 1.385277] [7: swapper/0: 1] etspi_init is successful |
| [ 1.385294] [7: swapper/0: 1] uh_log : create /proc/uh_log |
| [ 1.385422] [7: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio |
| [ 1.385848] [7: swapper/0: 1] cod3035x 4-0003: cod3035x_i2c_probe pinctrl |
| [ 1.385895] [5: swapper/0: 1] codec_speedy: registered |
| [ 1.386032] [5: swapper/0: 1] tfa98xx_i2c_init(): TFA98XX driver version v4.2.0-Jan.24,2017 |
| [ 1.386190] [5: swapper/0: 1] tfa98xx_i2c_probe(): tfa98xx_i2c_probe: start probing |
| [ 1.386205] [5: swapper/0: 1] tfa98xx_i2c_probe(): addr=0x34 |
| [ 1.387106] [7: swapper/0: 1] tfa98xx_i2c_probe(): TFA9872 detected |
| [ 1.387116] [7: swapper/0: 1] tfa98xx_append_i2c_address(): dai_drv[0].name=tfa98xx-aif-8-34 |
| [ 1.387124] [7: swapper/0: 1] tfa98xx_append_i2c_address(): dai_drv[0].playback.stream_name=AIF Playback-8-34 |
| [ 1.387131] [7: swapper/0: 1] tfa98xx_append_i2c_address(): dai_drv[0].capture.stream_name=AIF Capture-8-34 |
| [ 1.387145] [7: swapper/0: 1] tfa98xx 8-0034: Skipping IRQ registration |
| [ 1.387205] [7: swapper/0: 1] tfa98xx_i2c_probe(): tfa98xx_i2c_probe: Probe completed successfully! |
| [ 1.387306] [7: swapper/0: 1] tfa98xx_cal_init: g_nxp_class=ffffffc07f8da200 |
| [ 1.387312] [7: swapper/0: 1] tfa98xx_cal_init: initialized |
| [ 1.387348] [7: swapper/0: 1] tfa98xx_log_init: g_nxp_class=ffffffc07f8da200 |
| [ 1.387353] [7: swapper/0: 1] tfa98xx_log_init: initialized |
| [ 1.387679] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_platform_probe: DBMDX codec driver version = 4.031 |
| [ 1.387691] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA feature activated |
| [ 1.387701] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: Multi Interface Probe is not supported |
| [ 1.387708] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using device-tree VA firmware name: dbmd4_va_fw.bin |
| [ 1.387717] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using default VA preboot firmware name: dbmd4_va_preboot_fw.bin |
| [ 1.387727] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no buffering_timeout, setting to 200 |
| [ 1.387734] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using min_samples_chunk_size of 128 |
| [ 1.387740] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using max_detection_buffer_size of 0 |
| [ 1.387746] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no va buffering pcm rate, setting to 16000 |
| [ 1.387753] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 13 VA configuration values from dev-tree |
| [ 1.387759] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000000: 0x80000000 |
| [ 1.387765] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000001: 0x80000000 |
| [ 1.387770] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000002: 0x80000000 |
| [ 1.387775] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000003: 0x80290020 |
| [ 1.387781] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000004: 0x802210e0 |
| [ 1.387786] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000005: 0x80158e8e |
| [ 1.387792] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000006: 0x801b0020 |
| [ 1.387798] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000007: 0x801a0011 |
| [ 1.387804] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000008: 0x80230001 |
| [ 1.387810] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000009: 0x80108017 |
| [ 1.387815] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000a: 0x80000000 |
| [ 1.387820] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000b: 0x80000000 |
| [ 1.387826] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000c: 0x80000000 |
| [ 1.387831] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 3 VA mic configuration values from device-tree |
| [ 1.387839] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000000: 0x0000f041 |
| [ 1.387844] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000001: 0x00001044 |
| [ 1.387850] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000002: 0x00000008 |
| [ 1.387856] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA default mic config: 0x00000000 |
| [ 1.387864] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using backlog length of 1300 from device-tree |
| [ 1.387870] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using OKG backlog length of 1000 from device-tree |
| [ 1.387879] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using 3 VA speed configuration values from device-tree |
| [ 1.387888] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000000: 0x00000000 460800 0 960000 |
| [ 1.387894] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000001: 0x00000000 2000000 0 4800000 |
| [ 1.387900] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000002: 0x00000000 3000000 0 4800000 |
| [ 1.387906] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no wakeup_disabled definition in dev-tree |
| [ 1.387912] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using use_gpio_for_wakeup of 1 from dev-tree |
| [ 1.387918] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no send_wakeup_seq definition in device-tree |
| [ 1.387923] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using wakeup_set_value of 0 from device-tree |
| [ 1.387930] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using firmware_id of 0x dbd4 from device-tree |
| [ 1.387939] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: using dbmdx_master_clk at 32768HZ from device-tree |
| [ 1.387948] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_master_clk definition in device-tree |
| [ 1.387960] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no constant-clk-rate definition in device-tree |
| [ 1.387967] [7: swapper/0: 1] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_constant_clk definition in device-tree |
| [ 1.388283] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting spi read chunk to 8192 bytes |
| [ 1.388291] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting spi write chunk to 262144 bytes |
| [ 1.388297] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting Min DMA Cmd Size to default: 0 bytes |
| [ 1.388302] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: Setting Min DMA Cmd Size to default: 0 bytes |
| [ 1.388313] [7: swapper/0: 1] dbmd_4_6-spi spi2.0: spi_common_probe: successfully probed |
| [ 1.388728] [7: swapper/0: 1] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe: |
| [ 1.388880] [7: swapper/0: 1] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... |
| [ 1.389064] [7: swapper/0: 1] dbmdx_pcm_platform_probe |
| [ 1.389341] [7: swapper/0: 1] samsung-abox-gic 14af1000.abox_gic: samsung_abox_gic_probe |
| [ 1.389435] [7: swapper/0: 1] samsung-abox-gic 14af1000.abox_gic: samsung_abox_gic_probe: probe complete |
| [ 1.389810] [7: swapper/0: 1] samsung-abox 14a50000.abox: samsung_abox_probe |
| [ 1.393077] [7: swapper/0: 1] samsung-abox 14a50000.abox: dram firmware(0x00000008fd300000) is mapped on ffffff800e3e9000 with size of 12582912 |
| [ 1.393102] [7: swapper/0: 1] samsung-abox 14a50000.abox: Fault handler is registered for 14a30000.sysmmu_abox |
| [ 1.393550] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: Direct firmware load for calliope_sram.bin failed with error -2 |
| [ 1.393558] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: Falling back to user helper |
| [ 1.393640] [7: swapper/0: 1] abox_cpu_enable(0) |
| [ 1.393652] [7: swapper/0: 1] abox_cpu_power(0) |
| [ 1.393682] [7: swapper/0: 1] samsung-abox-gic 14af1000.abox_gic: abox_gic_register_irq_handler |
| [ 1.393767] [7: swapper/0: 1] samsung-abox 14a50000.abox: samsung_abox_probe: probe complete |
| [ 1.393804] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_runtime_resume |
| [ 1.393818] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_enable |
| [ 1.393830] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_request_cpu_gear(00000000ab0cdefa, 3) |
| [ 1.398158] [7: kworker/7:2: 1770] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 1.398173] [7: kworker/7:0: 45] abox_cpu_enable(0) |
| [ 1.398183] [7: kworker/7:0: 45] abox_cpu_power(0) |
| [ 1.398244] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: audif clock: 24576000 |
| [ 1.398257] [7: kworker/7:0: 45] samsung-abox-gic 14af1000.abox_gic: abox_gic_init_gic |
| [ 1.398275] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_cfg_gpio(default) |
| [ 1.398284] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: abox_download_firmware |
| [ 1.398290] [7: kworker/7:0: 45] samsung-abox 14a50000.abox: SRAM firmware downloading is deferred |
| [ 1.399694] [6: swapper/0: 1] samsung-abox-debug 14a50000.abox:abox_debug@0: dump buffer(0x00000000e9400000) is mapped on ffffffc069400000 with size of 0x0000000000400000 |
| [ 1.401763] [6: swapper/0: 1] exynos7885-COD3035 sound: exynos7885_audio_probe |
| [ 1.402256] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_codec_probe |
| [ 1.402349] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture |
| [ 1.402357] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> SPUSM |
| [ 1.402538] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no sink widget found for UAIF4 Playback |
| [ 1.402546] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF SPK4 -> direct -> UAIF4 Playback |
| [ 1.402557] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no sink widget found for DSIF Playback |
| [ 1.402567] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route DSIF SPK -> direct -> DSIF Playback |
| [ 1.402615] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture |
| [ 1.402623] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC0 |
| [ 1.402651] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture |
| [ 1.402659] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC1 |
| [ 1.402687] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture |
| [ 1.402695] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC2 |
| [ 1.402722] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: no source widget found for UAIF4 Capture |
| [ 1.402730] [6: swapper/0: 1] samsung-abox 14a50000.abox: ASoC: Failed to add route UAIF4 Capture -> UAIF4 -> NSRC3 |
| [ 1.402964] [6: swapper/0: 1] cod3035x 4-0003: 3035x CODEC_PROBE: (*) cod3035x_codec_probe |
| [ 1.403176] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_runtime_resume |
| [ 1.403183] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_enable |
| [ 1.403194] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_enable_mclk: ABOX_UAIF_CTRL0(ABOX_UAIF2)=00000002 |
| [ 1.403200] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_regulators_enable regulator: 1 |
| [ 1.441570] [6: swapper/0: 1] cod3035x 4-0003: (*)Error in getting Codec-3035 Interrupt gpio |
| [ 1.441585] [6: swapper/0: 1] cod3035x 4-0003: Bias voltage values: bias1 = 3, bias2= 1, ldo = 3 |
| [ 1.441596] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_i2c_parse_dt : cod3035x->use_det_gdet_adc_mode: 1 |
| [ 1.441603] [6: swapper/0: 1] cod3035x 4-0003: Using GPADC for button detection |
| [ 1.441762] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(226), low(0), high(376) |
| [ 1.441768] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(582), low(377), high(447) |
| [ 1.441775] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(115), low(448), high(627) |
| [ 1.441782] [6: swapper/0: 1] cod3035x 4-0003: [DEBUG]: buttons: code(114), low(628), high(1161) |
| [ 1.444031] [7: kworker/u16:2: 241] mmc_host mmc1: Bus speed (slot 0) = 24984375Hz (slot req 300000Hz, actual 297433HZ div = 42) |
| [ 1.463604] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_codec_initialize called, setting defaults |
| [ 1.569109] [6: swapper/0: 1] input: Codec3035 Headset Events as /devices/platform/11ce0000.speedy/i2c-4/4-0003/input/input2 |
| [ 1.569338] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_runtime_suspend |
| [ 1.569346] [6: swapper/0: 1] cod3035x 4-0003: (*) cod3035x_disable |
| [ 1.569354] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_regulators_disable regulator: 0 |
| [ 1.569367] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_enable_mclk: ABOX_UAIF_CTRL0(ABOX_UAIF2)=00000000 |
| [ 1.569800] [6: kworker/6:0: 40] tfa98xx 8-0034: Direct firmware load for Tfa9872.cnt failed with error -2 |
| [ 1.569809] [6: kworker/6:0: 40] tfa98xx 8-0034: Falling back to user helper |
| [ 1.569868] [6: swapper/0: 1] tfa98xx_append_i2c_address(): widgets[0].sname=AIF Playback-8-34 |
| [ 1.569875] [6: swapper/0: 1] tfa98xx_append_i2c_address(): widgets[1].sname=AIF Capture-8-34 |
| [ 1.569905] [6: swapper/0: 1] tfa98xx 8-0034: tfa98xx codec registered () |
| [ 1.570166] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA0 mapping ok |
| [ 1.570289] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA1 mapping ok |
| [ 1.570401] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA2 mapping ok |
| [ 1.570503] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA3 mapping ok |
| [ 1.570638] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA4 mapping ok |
| [ 1.570768] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA5 mapping ok |
| [ 1.570874] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA6 mapping ok |
| [ 1.570974] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> RDMA7 mapping ok |
| [ 1.571096] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA0 mapping ok |
| [ 1.571207] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA1 mapping ok |
| [ 1.571312] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA2 mapping ok |
| [ 1.571646] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA3 mapping ok |
| [ 1.571751] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> WDMA4 mapping ok |
| [ 1.571761] [6: swapper/0: 1] cod3035x 4-0003: cod3035x_dai_set_fmt called. fmt: 16385 |
| [ 1.571774] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[0](0x00001001) |
| [ 1.571813] [6: swapper/0: 1] exynos7885-COD3035 sound: cod3035x-aif <-> UAIF0 mapping ok |
| [ 1.571821] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[1](0x00004001) |
| [ 1.571856] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> UAIF1 mapping ok |
| [ 1.571863] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[2](0x00001001) |
| [ 1.571893] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> UAIF2 mapping ok |
| [ 1.571901] [6: swapper/0: 1] samsung-abox 14a50000.abox: abox_uaif_set_fmt[3](0x00001001) |
| [ 1.571933] [6: swapper/0: 1] exynos7885-COD3035 sound: tfa98xx-aif-8-34 <-> UAIF3 mapping ok |
| [ 1.571962] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> Internal mapping ok |
| [ 1.571986] [6: swapper/0: 1] exynos7885-COD3035 sound: snd-soc-dummy-dai <-> SPEEDY mapping ok |
| [ 1.573145] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux DMICL Mux2 has no paths |
| [ 1.573156] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux DMICR Mux2 has no paths |
| [ 1.573165] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux ADC DAT Mux0 has no paths |
| [ 1.573177] [6: swapper/0: 1] cod3035x 4-0003: ASoC: mux ADC DAT Mux1 has no paths |
| [ 1.573189] [6: swapper/0: 1] cod3035x 4-0003: ASoC: Failed to create DAC debugfs file |
| [ 1.573200] [6: swapper/0: 1] cod3035x 4-0003: ASoC: Failed to create ADC debugfs file |
| [ 1.573211] [6: swapper/0: 1] cod3035x 4-0003: ASoC: Failed to create DADC debugfs file |
| [ 1.574612] [6: swapper/0: 1] exynos7885-COD3035 sound: universal7885_mic_bias_parse_dt |
| [ 1.574625] [6: swapper/0: 1] exynos7885-COD3035 sound: BIAS: MIC1(0), MIC2(0), MIC3(2), LINEIN(0) |
| [ 1.574754] [6: swapper/0: 1] GACT probability NOT on |
| [ 1.574767] [6: swapper/0: 1] Mirror/redirect action on |
| [ 1.574781] [6: swapper/0: 1] u32 classifier |
| [ 1.574786] [6: swapper/0: 1] Actions configured |
| [ 1.574797] [6: swapper/0: 1] Netfilter messages via NETLINK v0.30. |
| [ 1.574824] [6: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| [ 1.575022] [6: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink. |
| [ 1.575424] [5: swapper/0: 1] xt_time: kernel timezone is -0000 |
| [ 1.575754] [6: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 1.575873] [6: swapper/0: 1] arp_tables: (C) 2002 David S. Miller |
| [ 1.575922] [6: swapper/0: 1] Initializing XFRM netlink socket |
| [ 1.576192] [6: swapper/0: 1] NET: Registered protocol family 10 |
| [ 1.576967] [6: swapper/0: 1] mip6: Mobile IPv6 |
| [ 1.576988] [6: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 1.577109] [6: swapper/0: 1] sit: IPv6 over IPv4 tunneling driver |
| [ 1.577618] [6: swapper/0: 1] fullmesh registered |
| [ 1.577636] [6: swapper/0: 1] NET: Registered protocol family 17 |
| [ 1.577651] [6: swapper/0: 1] NET: Registered protocol family 15 |
| [ 1.577665] [6: swapper/0: 1] NET: Registered protocol family 35 |
| [ 1.577882] [6: swapper/0: 1] ncm: Network Context Metadata Module: initialized |
| [ 1.578093] [6: swapper/0: 1] decon: dpp(0) probe start.. |
| [ 1.578100] [6: swapper/0: 1] decon: res: start(0x14851000), end(0x14851fff) |
| [ 1.578146] [6: swapper/0: 1] decon: dma res: start(0x148b1000), end(0x148b1fff) |
| [ 1.578154] [6: swapper/0: 1] decon: dma common res: start(0x148b0000), end(0x148b00ff) |
| [ 1.578162] [6: swapper/0: 1] decon: irq no = 78 |
| [ 1.578196] [6: swapper/0: 1] exynos-dpp 14851000.dpp: Fault handler is registered for 148c0000.sysmmu |
| [ 1.578202] [6: swapper/0: 1] decon: dpp0 is probed successfully |
| [ 1.578282] [6: swapper/0: 1] decon: dpp(1) probe start.. |
| [ 1.578288] [6: swapper/0: 1] decon: res: start(0x14852000), end(0x14852fff) |
| [ 1.578297] [6: swapper/0: 1] decon: dma res: start(0x148b2000), end(0x148b2fff) |
| [ 1.578305] [6: swapper/0: 1] decon: irq no = 79 |
| [ 1.578330] [6: swapper/0: 1] exynos-dpp 14852000.dpp: Fault handler is registered for 148c0000.sysmmu |
| [ 1.578336] [6: swapper/0: 1] decon: dpp1 is probed successfully |
| [ 1.578381] [6: swapper/0: 1] decon: dpp(3) probe start.. |
| [ 1.578388] [6: swapper/0: 1] decon: res: start(0x14853000), end(0x14853fff) |
| [ 1.578398] [6: swapper/0: 1] decon: dma res: start(0x148b3000), end(0x148b3fff) |
| [ 1.578410] [6: swapper/0: 1] decon: irq no = 80 |
| [ 1.578433] [6: swapper/0: 1] exynos-dpp 14853000.dpp: Fault handler is registered for 148c0000.sysmmu |
| [ 1.578440] [6: swapper/0: 1] decon: dpp3 is probed successfully |
| [ 1.578482] [6: swapper/0: 1] decon: dpp(2) probe start.. |
| [ 1.578490] [6: swapper/0: 1] decon: res: start(0x14854000), end(0x14854fff) |
| [ 1.578499] [6: swapper/0: 1] decon: dma res: start(0x148b4000), end(0x148b4fff) |
| [ 1.578510] [6: swapper/0: 1] decon: irq no = 81 |
| [ 1.578529] [6: swapper/0: 1] decon: dpp irq no = 82 |
| [ 1.578552] [6: swapper/0: 1] exynos-dpp 14854000.dpp: Fault handler is registered for 148c0000.sysmmu |
| [ 1.578559] [6: swapper/0: 1] decon: dpp2 is probed successfully |
| [ 1.579476] [6: swapper/0: 1] Registered cp15_barrier emulation handler |
| [ 1.579495] [6: swapper/0: 1] Registered setend emulation handler |
| [ 1.579689] [7: swapper/0: 1] HMP: down-migration compensation initialized |
| [ 1.579699] [7: swapper/0: 1] HMP: tbsoftlanding: base threshold:107, timeout: 30 |
| [ 1.579705] [7: swapper/0: 1] HMP: tbsoftlanding: lv:0, freq: 1500000, threshold: 177 |
| [ 1.579710] [7: swapper/0: 1] HMP: tbsoftlanding: lv:1, freq: 1000000, threshold: 142 |
| [ 1.579715] [7: swapper/0: 1] HMP: tbsoftlanding: lv:2, freq: 800000, threshold: 107 |
| [ 1.581318] [7: swapper/0: 1] registered taskstats version 1 |
| [ 1.581559] [7: swapper/0: 1] zswap: loaded using pool lz4/zsmalloc |
| [ 1.581991] [6: swapper/0: 1] Key type encrypted registered |
| [ 1.582222] [6: swapper/0: 1] dsim: dsim(0) probe start.. |
| [ 1.582283] [6: swapper/0: 1] dsim: LCD(/s6e3fa7_fhd) resolution: xres(1080), yres(2220) |
| [ 1.582292] [6: swapper/0: 1] dsim: mic enabled (0) |
| [ 1.582299] [6: swapper/0: 1] dsim: dsc is disabled |
| [ 1.582306] [6: swapper/0: 1] dsim: using data lane count(4) |
| [ 1.582312] [6: swapper/0: 1] dsim: cmd_underrun_lp_ref(2498) |
| [ 1.582317] [6: swapper/0: 1] dsim: res: start(0x14870000), end(0x148700ff) |
| [ 1.582363] [6: swapper/0: 1] dsim: dsim irq (83) |
| [ 1.582554] [6: swapper/0: 1] dsim: dsim_get_data_lanes: lanes(0x1f) |
| [ 1.582560] [6: swapper/0: 1] dsim: + dsim_enable |
| [ 1.582572] [6: swapper/0: 1] dsim: dsim_set_panel_power_early + |
| [ 1.582581] [6: swapper/0: 1] decon_board: 609: find_list: dsim_set_panel_power_early is not exist, so create it |
| [ 1.582588] [6: swapper/0: 1] decon_board: 624: run_list: dsim_set_panel_power_early is empty, so make list |
| [ 1.582657] [6: swapper/0: 1] decon_board: 395: make_list: dsim_set_panel_power_early node does not exist, so create dummy |
| [ 1.582662] [6: swapper/0: 1] decon_board: 202: print_action: [ 0] unknown idx |
| [ 1.582669] [6: swapper/0: 1] dsim: dsim_set_panel_power_early - |
| [ 1.582675] [6: swapper/0: 1] dsim: dsim_set_panel_power: 1 |
| [ 1.582681] [6: swapper/0: 1] decon_board: 609: find_list: dsim_set_panel_power_enable is not exist, so create it |
| [ 1.582686] [6: swapper/0: 1] decon_board: 624: run_list: dsim_set_panel_power_enable is empty, so make list |
| [ 1.582720] [6: swapper/0: 1] decon_board: 343: check_dt: gpio: 2, regulator: 0, delay: 4, pinctrl: 0, timer: 0 |
| [ 1.594921] [6: swapper/0: 1] dsim: dsim0 PLL is stabled in bootloader, so skip DSIM link/DPHY init. |
| [ 1.594935] [6: swapper/0: 1] dsim: - dsim_enable |
| [ 1.595042] [6: swapper/0: 1] lcd panel: s6e3fa7_probe |
| [ 1.595083] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: 4, ret: 3 |
| [ 1.595176] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: c8, ret: 47 |
| [ 1.595217] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: a1, ret: 4 |
| [ 1.595259] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: d6, ret: 5 |
| [ 1.595323] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: b5, ret: 24 |
| [ 1.595383] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: c9, ret: 21 |
| [ 1.595458] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: b3, ret: 34 |
| [ 1.595530] [6: swapper/0: 1] lcd panel: dsim_read_hl_data: addr: b8, ret: 33 |
| [ 1.595664] [6: swapper/0: 1] Dynamic Aid Finished ! |
| [ 1.595716] [6: swapper/0: 1] Dynamic Aid Finished ! |
| [ 1.595744] [6: swapper/0: 1] lcd panel: elvss: 140ddc19 |
| [ 1.595755] [6: swapper/0: 1] lcd panel: acl: 504d5002, brightness: 128, adaptive_control: 1 |
| [ 1.595768] [6: swapper/0: 1] lcd panel: vint: 23 |
| [ 1.595779] [6: swapper/0: 1] lcd panel: brightness: 128, bl: 53, nit: 183, lx: -1 |
| [ 1.595785] [6: swapper/0: 1] lcd panel: s6e3fa7_probe: done |
| [ 1.595818] [6: swapper/0: 1] lcd panel: lcd_init_svc: /devices/svc |
| [ 1.595892] [6: swapper/0: 1] dpui_logging_register register type MDNIE |
| [ 1.595920] [6: swapper/0: 1] mdnie mdnie: AUTO_UI |
| [ 1.595925] [6: swapper/0: 1] mdnie mdnie: registered successfully |
| [ 1.595930] [6: swapper/0: 1] dpui_logging_register register type PANEL |
| [ 1.595936] [6: swapper/0: 1] lcd panel: s6e3fa7_register_notifier |
| [ 1.595941] [6: swapper/0: 1] lcd panel: s6e3fa7_a7y18_lcd_ctrl.c: dsim_panel_probe: done |
| [ 1.595949] [6: swapper/0: 1] dsim: dsim0 driver(cmd mode) has been probed. |
| [ 1.596326] [6: swapper/0: 1] exynos-decon 14860000.decon_f: decon_probe start |
| [ 1.596518] [6: swapper/0: 1] decon: decon-f: max win4, command mode, hw trigger |
| [ 1.596524] [6: swapper/0: 1] decon: dsi mode(0). 0: SINGLE 1: DUAL |
| [ 1.596531] [6: swapper/0: 1] decon: out type(0). 0: DSI 1: DISPLAYPORT 2: HDMI 3: WB |
| [ 1.596537] [6: swapper/0: 1] decon: out idx(0). 0: DSI0 1: DSI1 2: DSI2 |
| [ 1.596666] [6: swapper/0: 1] decon: This board doesn't support TE GPIO of 2nd LCD |
| [ 1.596684] [6: swapper/0: 1] decon: decon_register_ext_irq: gpio(202) |
| [ 1.597196] [6: swapper/0: 1] decon: lcd_info: hfp 2 hbp 2 hsa 2 vfp 3 vbp 15 vsa 1 |
| [ 1.597206] [6: swapper/0: 1] decon: xres 1080 yres 2220 |
| [ 1.597213] [6: swapper/0: 1] decon: default_win 3 win_idx 0 xres 1080 yres 2220 |
| [ 1.597220] [6: swapper/0: 1] decon: default_win 3 win_idx 1 xres 1080 yres 2220 |
| [ 1.597227] [6: swapper/0: 1] decon: default_win 3 win_idx 2 xres 1080 yres 2220 |
| [ 1.597232] [6: swapper/0: 1] decon: decon_fb_alloc_memory + |
| [ 1.597240] [6: swapper/0: 1] exynos-decon 14860000.decon_f: allocating memory for display |
| [ 1.597247] [6: swapper/0: 1] exynos-decon 14860000.decon_f: real_size=2397600 (1080.2220), virt_size=4795200 (1080.4440) |
| [ 1.597252] [6: swapper/0: 1] exynos-decon 14860000.decon_f: want 19181568 bytes for window[3] |
| [ 1.604387] [6: swapper/0: 1] exynos-decon 14860000.decon_f: alloated memory |
| [ 1.604398] [6: swapper/0: 1] exynos-decon 14860000.decon_f: fb start addr = 0x10000000 |
| [ 1.604405] [6: swapper/0: 1] decon: decon_fb_alloc_memory - |
| [ 1.604411] [6: swapper/0: 1] decon: default_win 3 win_idx 3 xres 1080 yres 2220 |
| [ 1.604698] [6: swapper/0: 1] decon: window update is enabled: win rectangle w(360), h(222) |
| [ 1.604704] [6: swapper/0: 1] decon: horizontal count(3), vertical count(10) |
| [ 1.604940] [6: swapper/0: 1] decon: decon_reg_init already called by BOOTLOADER |
| [ 1.604992] [6: swapper/0: 1] exynos-decon 14860000.decon_f: pm_stay_awake |
| [ 1.604998] [6: swapper/0: 1] decon: decon_probe: lcdtype: 810543 |
| [ 1.605005] [6: swapper/0: 1] decon: decon_abd_register: ++ |
| [ 1.605017] [6: swapper/0: 1] decon: decon_abd_register_function: found gpio_pcd(12) success |
| [ 1.605039] [6: swapper/0: 1] decon: decon_abd_register_function: pcd is active low, falling |
| [ 1.605076] [6: swapper/0: 1] decon: decon_abd_register_function: found gpio_det(7) success |
| [ 1.605084] [6: swapper/0: 1] decon: decon_abd_register_function: det is active low, falling |
| [ 1.605111] [6: swapper/0: 1] decon: decon_abd_register_function: found gpio_err(15) success |
| [ 1.605120] [6: swapper/0: 1] decon: decon_abd_register_function: err is active low, falling |
| [ 1.605159] [6: swapper/0: 1] decon: decon_abd_register: -- 3 entity was registered |
| [ 1.605167] [6: swapper/0: 1] decon: decon_abd_enable_interrupt: on: 1, pcd(203) level: 1, count: 0, state: 0 |
| [ 1.605179] [6: swapper/0: 1] decon: decon_abd_enable_interrupt: on: 1, det(204) level: 1, count: 0, state: 0 |
| [ 1.605189] [6: swapper/0: 1] decon: decon_abd_enable_interrupt: on: 1, err(205) level: 1, count: 0, state: 0 |
| [ 1.605198] [6: swapper/0: 1] decon: decon0 registered successfully |
| [ 1.605460] [6: swapper/0: 1] [MUIC] muic_notifier_register: listener=6 register |
| [ 1.610982] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-dispaud's Runtime_Resume |
| [ 1.610997] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-dispaud's Runtime_Suspend |
| [ 1.611181] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-mfcmscl's Runtime_Resume |
| [ 1.611189] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-mfcmscl's Runtime_Suspend |
| [ 1.611398] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-isp's Runtime_Resume |
| [ 1.611406] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-isp's Runtime_Suspend |
| [ 1.611643] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-cam's Runtime_Resume |
| [ 1.611650] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-cam's Runtime_Suspend |
| [ 1.612602] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-g3d's Runtime_Resume |
| [ 1.612610] [6: swapper/0: 1] EXYNOS-PD-DBG: dbgdev-pd-g3d's Runtime_Suspend |
| [ 1.616756] [5: kworker/u16:3: 413] cis_2p6_probe sensor id 0 |
| [ 1.616774] [5: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.616895] [5: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1 |
| [ 1.616908] [5: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.616999] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.617011] [7: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.617572] [7: kworker/u16:3: 413] sec-thermistor sec_thermistor@0: sec-ap-thermistor successfully probed. |
| [ 1.617855] [7: kworker/u16:3: 413] sec-thermistor sec_thermistor@6: sec-wf-thermistor successfully probed. |
| [ 1.618048] [7: kworker/u16:3: 413] exynos-tmu 10070000.BIG: thermal zone use hotplug function |
| [ 1.618271] [7: kworker/u16:3: 413] thermal_zone_of_sensor_register 551 thermal zone_name = BIG |
| [ 1.618282] [7: kworker/u16:3: 413] exynos-tmu 10070000.BIG: Trip count parsed from ECT : 8, zone : BIG |
| [ 1.618290] [7: kworker/u16:3: 413] Parsed From ECT : [0] Temperature : 20, frequency : 2184000, level = 0 |
| [ 1.618298] [7: kworker/u16:3: 413] Parsed From ECT : [1] Temperature : 76, frequency : 1768000, level = 4 |
| [ 1.618305] [7: kworker/u16:3: 413] Parsed From ECT : [2] Temperature : 81, frequency : 1768000, level = 4 |
| [ 1.618313] [7: kworker/u16:3: 413] Parsed From ECT : [3] Temperature : 86, frequency : 1560000, level = 6 |
| [ 1.618319] [7: kworker/u16:3: 413] Parsed From ECT : [4] Temperature : 91, frequency : 728000, level = 9 |
| [ 1.618323] [7: kworker/u16:3: 413] Parsed From ECT : [5] Temperature : 96, frequency : 728000, level = 9 |
| [ 1.618328] [7: kworker/u16:3: 413] [ECT]hotplug_threshold : 96 |
| [ 1.618333] [7: kworker/u16:3: 413] [ECT]hotplug_in_threshold : 91 |
| [ 1.618337] [7: kworker/u16:3: 413] [ECT]hotplug_out_threshold : 96 |
| [ 1.618343] [7: kworker/u16:3: 413] Parsed From ECT : [6] Temperature : 101, frequency : 728000, level = 9 |
| [ 1.618348] [7: kworker/u16:3: 413] Parsed From ECT : [7] Temperature : 115, frequency : 728000, level = 9 |
| [ 1.618357] [7: kworker/u16:3: 413] exynos-tmu 10070000.BIG: Sensor number = 0 |
| [ 1.618781] [7: kworker/u16:3: 413] thermal_zone_of_sensor_register 551 thermal zone_name = LITTLE |
| [ 1.618792] [7: kworker/u16:3: 413] exynos-tmu 10070000.LITTLE: Trip count parsed from ECT : 8, zone : LITTLE |
| [ 1.618802] [7: kworker/u16:3: 413] Parsed From ECT : [0] Temperature : 20, frequency : 1586000, level = 0 |
| [ 1.618811] [7: kworker/u16:3: 413] Parsed From ECT : [1] Temperature : 76, frequency : 1586000, level = 0 |
| [ 1.618819] [7: kworker/u16:3: 413] Parsed From ECT : [2] Temperature : 81, frequency : 1586000, level = 0 |
| [ 1.618824] [7: kworker/u16:3: 413] Parsed From ECT : [3] Temperature : 86, frequency : 1352000, level = 2 |
| [ 1.618829] [7: kworker/u16:3: 413] Parsed From ECT : [4] Temperature : 91, frequency : 1144000, level = 4 |
| [ 1.618834] [7: kworker/u16:3: 413] Parsed From ECT : [5] Temperature : 96, frequency : 902000, level = 6 |
| [ 1.618839] [7: kworker/u16:3: 413] Parsed From ECT : [6] Temperature : 101, frequency : 208000, level = 11 |
| [ 1.618845] [7: kworker/u16:3: 413] Parsed From ECT : [7] Temperature : 115, frequency : 208000, level = 11 |
| [ 1.618854] [7: kworker/u16:3: 413] exynos-tmu 10070000.LITTLE: Sensor number = 0 |
| [ 1.619055] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 0, frequency : 1100000 |
| [ 1.619062] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 1, frequency : 845000 |
| [ 1.619071] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 2, frequency : 676000 |
| [ 1.619077] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 3, frequency : 450000 |
| [ 1.619084] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: [GPU TMU] index : 4, frequency : 343000 |
| [ 1.619296] [7: kworker/u16:3: 413] thermal_zone_of_sensor_register 551 thermal zone_name = G3D |
| [ 1.619305] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: Trip count parsed from ECT : 8, zone : G3D |
| [ 1.619312] [7: kworker/u16:3: 413] Parsed From ECT : [0] Temperature : 20, frequency : 1100000, level = 0 |
| [ 1.619317] [7: kworker/u16:3: 413] Parsed From ECT : [1] Temperature : 76, frequency : 1100000, level = 0 |
| [ 1.619324] [7: kworker/u16:3: 413] Parsed From ECT : [2] Temperature : 81, frequency : 1100000, level = 0 |
| [ 1.619331] [7: kworker/u16:3: 413] Parsed From ECT : [3] Temperature : 86, frequency : 845000, level = 1 |
| [ 1.619336] [7: kworker/u16:3: 413] Parsed From ECT : [4] Temperature : 91, frequency : 676000, level = 2 |
| [ 1.619341] [7: kworker/u16:3: 413] Parsed From ECT : [5] Temperature : 96, frequency : 450000, level = 3 |
| [ 1.619346] [7: kworker/u16:3: 413] Parsed From ECT : [6] Temperature : 101, frequency : 343000, level = 4 |
| [ 1.619351] [7: kworker/u16:3: 413] Parsed From ECT : [7] Temperature : 115, frequency : 343000, level = 4 |
| [ 1.619359] [7: kworker/u16:3: 413] exynos-tmu 10074000.G3D: Sensor number = 0 |
| [ 1.619792] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_platform_probe: DBMDX codec driver version = 4.031 |
| [ 1.619809] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA feature activated |
| [ 1.619820] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: Multi Interface Probe is not supported |
| [ 1.619828] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using device-tree VA firmware name: dbmd4_va_fw.bin |
| [ 1.619836] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using default VA preboot firmware name: dbmd4_va_preboot_fw.bin |
| [ 1.619844] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no buffering_timeout, setting to 200 |
| [ 1.619852] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using min_samples_chunk_size of 128 |
| [ 1.619858] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using max_detection_buffer_size of 0 |
| [ 1.619863] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: no va buffering pcm rate, setting to 16000 |
| [ 1.619870] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 13 VA configuration values from dev-tree |
| [ 1.619876] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000000: 0x80000000 |
| [ 1.619882] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000001: 0x80000000 |
| [ 1.619887] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000002: 0x80000000 |
| [ 1.619892] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000003: 0x80290020 |
| [ 1.619899] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000004: 0x802210e0 |
| [ 1.619904] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000005: 0x80158e8e |
| [ 1.619909] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000006: 0x801b0020 |
| [ 1.619914] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000007: 0x801a0011 |
| [ 1.619920] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000008: 0x80230001 |
| [ 1.619926] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 00000009: 0x80108017 |
| [ 1.619932] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000a: 0x80000000 |
| [ 1.619937] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000b: 0x80000000 |
| [ 1.619942] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA cfg 0000000c: 0x80000000 |
| [ 1.619949] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using 3 VA mic configuration values from device-tree |
| [ 1.619956] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000000: 0x0000f041 |
| [ 1.619962] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000001: 0x00001044 |
| [ 1.619967] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA mic cfg 00000002: 0x00000008 |
| [ 1.619974] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: VA default mic config: 0x00000000 |
| [ 1.619981] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using backlog length of 1300 from device-tree |
| [ 1.619989] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_devtree_pdata: using OKG backlog length of 1000 from device-tree |
| [ 1.619999] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using 3 VA speed configuration values from device-tree |
| [ 1.620007] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000000: 0x00000000 460800 0 960000 |
| [ 1.620013] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000001: 0x00000000 2000000 0 4800000 |
| [ 1.620020] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000002: 0x00000000 3000000 0 4800000 |
| [ 1.620028] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no wakeup_disabled definition in dev-tree |
| [ 1.620034] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using use_gpio_for_wakeup of 1 from dev-tree |
| [ 1.620041] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: no send_wakeup_seq definition in device-tree |
| [ 1.620048] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using wakeup_set_value of 0 from device-tree |
| [ 1.620054] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_devtree_pdata: using firmware_id of 0x dbd4 from device-tree |
| [ 1.620065] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: using dbmdx_master_clk at 32768HZ from device-tree |
| [ 1.620075] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_master_clk definition in device-tree |
| [ 1.620087] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no constant-clk-rate definition in device-tree |
| [ 1.620094] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_of_get_clk_info: no dbmdx_constant_clk definition in device-tree |
| [ 1.620195] [7: kworker/u16:3: 413] dbmdx supply dbmdx_regulator not found, using dummy regulator |
| [ 1.620348] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_common_probe: missing or invalid d2 strap1 gpio: -2 |
| [ 1.620436] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_va_resources |
| [ 1.620562] [7: kworker/u16:3: 413] wake enabled for irq 201 |
| [ 1.620784] [7: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_get_dai_drivers: num DAIs: 1 |
| [ 1.620867] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_common_probe: registered DBMDX codec driver version = 4.031 |
| [ 1.620873] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_request_and_load_fw VA/- |
| [ 1.620885] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move BOOTING -> BOOTING (00 -> 00) |
| [ 1.620894] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved BOOTING -> BOOTING (00 -> 00) |
| [ 1.620900] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_request_and_load_fw: request VA firmware - dbmd4_va_fw.bin |
| [ 1.620907] [6: kworker/u16:3: 413] samsung-abox 14a50000.abox: dbmdx_remote_add_codec_controls start |
| [ 1.620946] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: Direct firmware load for dbmd4_va_fw.bin failed with error -2 |
| [ 1.620952] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: Falling back to user helper |
| [ 1.620969] [6: kworker/u16:3: 413] samsung-abox 14a50000.abox: dbmdx_remote_add_codec_controls: 10 VA controls added |
| [ 1.620975] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_platform_probe: successfully probed |
| [ 1.621135] [6: kworker/u16:3: 413] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe: |
| [ 1.621346] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_dev_probe: 10 VA controls registered |
| [ 1.621353] [6: kworker/u16:3: 413] dbmdx-codec dbmdx: dbmdx_dev_probe: success |
| [ 1.621370] [6: kworker/u16:3: 413] dbmdx_pcm_probe |
| [ 1.621420] [6: kworker/u16:3: 413] dbmdx_pcm_new |
| [ 1.621427] [6: kworker/u16:3: 413] dbmdx_pcm_preallocate_dma_buffer |
| [ 1.621655] [6: kworker/u16:3: 413] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: DBMDX_codec_dai <-> DBMDX_codec_dai mapping ok |
| [ 1.621702] [7: kworker/u16:2: 241] dbmdx-codec dbmdx: dbmdx_set_bias_level: level 1 |
| [ 1.621709] [7: kworker/u16:2: 241] dbmdx-codec dbmdx: dbmdx_set_bias_level: level 2 |
| [ 1.621736] [6: kworker/u16:0: 6] dbmdx-codec dbmdx: dbmdx_set_bias_level: level 3 |
| [ 1.622125] [5: kworker/u16:3: 413] snd-dbmdx-mach-drv snd-dbmdx-mach-drv: dbmdx_snd_probe: DBMDX ASoC card registered |
| [ 1.622275] [5: kworker/u16:3: 413] cis_2p6_probe sensor id 0 |
| [ 1.622289] [5: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.622403] [5: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1 |
| [ 1.622417] [5: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.622511] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.622526] [6: swapper/0: 1] sensor peri is not yet probed |
| [ 1.622781] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins |
| [ 1.622787] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt, gpios_redriver_en -2 |
| [ 1.622793] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt, can_disable_usb 1 |
| [ 1.622798] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt - get hs_vdd error |
| [ 1.622803] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt - get ss_vdd error |
| [ 1.622807] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt - get dp_vdd error |
| [ 1.622812] [6: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt, usb_ldocontrol 0 |
| [ 1.622817] [6: swapper/0: 1] usb_notify: registered otg_notify + |
| [ 1.622925] [6: swapper/0: 1] usb_notify: ovc_init |
| [ 1.623006] [6: swapper/0: 1] usb_notify: register_usblog_proc already registered |
| [ 1.623011] [6: swapper/0: 1] usb_notify: registered otg_notify - |
| [ 1.623016] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=22 register |
| [ 1.623022] [6: swapper/0: 1] usb: [M] manager_notifier_register USB: attach=0, drp=USB_DETACH |
| [ 1.623027] [6: swapper/0: 1] usb_notifier: ccic_usb_handle_notification: Turn Off Device(UFP) |
| [ 1.623033] [6: swapper/0: 1] usb_notify: send_otg_notify event=vbus(1) enable=0 |
| [ 1.623038] [6: swapper/0: 1] usb_notify: send_otg_notify reserve event |
| [ 1.623043] [6: swapper/0: 1] vbus_notifier_register: listener=2 register |
| [ 1.623049] [6: swapper/0: 1] usb_notifier: vbus_handle_notification cmd=1, vbus_type=LOW |
| [ 1.623055] [6: swapper/0: 1] usb_notify: send_otg_notify event=vbus_power(25) enable=0 |
| [ 1.623060] [6: swapper/0: 1] usb_notify: extra_notifier_callback event=vbus_power(25) |
| [ 1.623065] [6: swapper/0: 1] usb_notify: extra_notify_state+ event=vbus_power(25), enable=off |
| [ 1.623071] [6: swapper/0: 1] usb_notify: extra_notify_state- event=vbus_power(25), cable=none |
| [ 1.623077] [6: swapper/0: 1] usb_notifier usb_notifier: usb notifier probe |
| [ 1.623153] [7: kworker/u16:3: 413] cis_2p6_probe sensor id 0 |
| [ 1.623156] [6: swapper/0: 1] usb: [M] manager_notifier_init |
| [ 1.623161] [6: swapper/0: 1] manager_notifier_init already registered |
| [ 1.623168] [7: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.623228] [7: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1 |
| [ 1.623233] [7: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.623273] [7: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.623277] [6: swapper/0: 1] sensor peri is not yet probed |
| [ 1.623720] [6: swapper/0: 1] input: gpio_keys as /devices/platform/gpio_keys/input/input3 |
| [ 1.623973] [7: kworker/u16:3: 413] cis_2p6_probe sensor id 0 |
| [ 1.623980] [7: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.624039] [7: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1 |
| [ 1.624044] [7: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.624084] [7: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.624089] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.624419] [7: swapper/0: 1] input: flip_cover as /devices/platform/flip_cover/input/input4 |
| [ 1.624751] [5: kworker/u16:3: 413] cis_2p6_probe sensor id 0 |
| [ 1.624766] [5: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.624874] [5: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1 |
| [ 1.624887] [5: kworker/u16:3: 413] sensor peri is not yet probed |
| [ 1.624980] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.624994] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.625991] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: s2m_rtc_read_time: 2017-01-28 08:26:33(0x40)AM |
| [ 1.626100] [7: swapper/0: 1] s2mpu08-rtc s2mpu08-rtc: setting system clock to 2017-01-28 08:26:33 UTC (1485591993) |
| [ 1.626619] [7: swapper/0: 1] [@][1][FRT:D] fimc_is_csi_probe(0) |
| [ 1.626733] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ss0(101) is created |
| [ 1.626836] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc0(210) is created |
| [ 1.626898] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc1(211) is created |
| [ 1.626975] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc2(212) is created |
| [ 1.627038] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc3(213) is created |
| [ 1.627047] [7: swapper/0: 1] [@][0][SEN:D] fimc_is_sensor_probe(0) |
| [ 1.627185] [4: kworker/u16:3: 413] cis_2p6_probe sensor id 0 |
| [ 1.627203] [4: kworker/u16:3: 413] cis_2p6_probe f-number 170 |
| [ 1.627225] [4: kworker/u16:3: 413] cis_2p6_probe setfile_B for PDAF |
| [ 1.627237] [4: kworker/u16:3: 413] cis_2p6_probe done |
| [ 1.627278] [7: swapper/0: 1] [@][0][FRT:D] fimc_is_csi_probe(0) |
| [ 1.627337] [4: kworker/u16:3: 413] cis_3p8sp_probe sensor id 1 |
| [ 1.627351] [4: kworker/u16:3: 413] cis_3p8sp_probe f-number 190 |
| [ 1.627365] [4: kworker/u16:3: 413] cis_3p8sp_probe setfile_B for PDAF |
| [ 1.627379] [4: kworker/u16:3: 413] cis_3p8sp_probe done |
| [ 1.627448] [4: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.627453] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ss1(102) is created |
| [ 1.627465] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.627664] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc0(214) is created |
| [ 1.627834] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc1(215) is created |
| [ 1.627897] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc2(216) is created |
| [ 1.627951] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc3(217) is created |
| [ 1.627960] [7: swapper/0: 1] [@][1][SEN:D] fimc_is_sensor_probe(0) |
| [ 1.628168] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.628186] [7: swapper/0: 1] sensor peri is not yet probed |
| [ 1.628350] [7: swapper/0: 1] [@][2][FRT:D] fimc_is_csi_probe(0) |
| [ 1.628527] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ss2(103) is created |
| [ 1.628703] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc0(218) is created |
| [ 1.628763] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc1(219) is created |
| [ 1.628911] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc2(220) is created |
| [ 1.628973] [7: swapper/0: 1] [@][VID] exynos-fimc-is-ssinstancevc3(221) is created |
| [ 1.628981] [7: swapper/0: 1] [@][2][SEN:D] fimc_is_sensor_probe(0) |
| [ 1.629180] [5: kworker/u16:3: 413] cis_sr846_probe sensor id 2 |
| [ 1.629201] [5: kworker/u16:3: 413] cis_sr846_probe f-number 190 |
| [ 1.629215] [5: kworker/u16:3: 413] cis_sr846_probe : setfile_B |
| [ 1.629224] [7: swapper/0: 1] [@][ERR]fimc_is_sensor_parse_dt:313:id read is fail(-22) |
| [ 1.629235] [7: swapper/0: 1] [@][ERR]fimc_is_sensor_probe:1320:parsing device tree is fail(-22) |
| [ 1.629245] [7: swapper/0: 1] [@][-1][SEN:D] fimc_is_sensor_probe(-22) |
| [ 1.629256] [7: swapper/0: 1] exynos-fimc-is-sensor: probe of 14430000.fimc_is_sensor failed with error -22 |
| [ 1.629268] [5: kworker/u16:3: 413] cis_sr846_probe done |
| [ 1.629578] [7: swapper/0: 1] s610-radio 14ac0000.fm: >>> start FM Radio probe |
| [ 1.629650] [7: swapper/0: 1] exynos_pmu_shared_reg_enable) need_delay = 1, usage_cnt = 1, CP_WAKEUP = 1, CP_STAT = 0x01, EXT_REGULATOR_SHARED_STATUS: 0x00090000, CALLER = s610_radio_probe |
| [ 1.629729] [7: swapper/0: 1] s610-radio 14ac0000.fm: Enable elna_gpio control |
| [ 1.640988] [7: swapper/0: 1] s610-radio 14ac0000.fm: fm_ds_set: DS set: 0x0h, reg val: 0x6eh |
| [ 1.641226] [7: swapper/0: 1] s610-radio 14ac0000.fm: fmspeedy_set_reg_core(), Fail addr:0xfff255h, data:0x4300308h |
| [ 1.641496] [7: swapper/0: 1] s610-radio 14ac0000.fm: fmspeedy_get_reg_core(), Fail addr:0xfff399h |
| [ 1.641568] [7: swapper/0: 1] s610-radio 14ac0000.fm: >>> FM version: DEMOD[FFFFFFFF]ANA[30100]PMU[30100]SCG[30100]SPY[30100]TOP[30100]DS[0]BUILD[00BD7639] |
| [ 1.641804] [7: swapper/0: 1] s610-radio 14ac0000.fm: fmspeedy_set_reg_field_core(), Fail addr:0xfff221h, data:0x1h, cnt:100 |
| [ 1.641823] [7: swapper/0: 1] s610-radio 14ac0000.fm: fm_aux_pll_off():PLL_CLK_EN[01] |
| [ 1.641831] [7: swapper/0: 1] s610-radio 14ac0000.fm: iClk Aux: 1 |
| [ 1.641843] [7: swapper/0: 1] s610-radio 14ac0000.fm: volume select num: 16 |
| [ 1.641851] [7: swapper/0: 1] s610-radio 14ac0000.fm: volume -3dB: 0 |
| [ 1.641858] [7: swapper/0: 1] s610-radio 14ac0000.fm: rssi_est_on: 0 |
| [ 1.641865] [7: swapper/0: 1] s610-radio 14ac0000.fm: sw_mute_weak: 0 |
| [ 1.641870] [7: swapper/0: 1] s610-radio 14ac0000.fm: without eLNA: 0 |
| [ 1.641877] [7: swapper/0: 1] s610-radio 14ac0000.fm: rssi adjust: 0 |
| [ 1.641900] [7: swapper/0: 1] s610-radio 14ac0000.fm: end FM probe. |
| [ 1.642398] [7: swapper/0: 1] exynos-mmc-srpmb mmc-srpmb: srpmb dma addr: virt(ffffff80103f0000), phy(8fe010000) |
| [ 1.642908] [6: swapper/0: 1] exynos-fmp fmp: Exynos FMP Version: 1.3.2 |
| [ 1.643619] [6: swapper/0: 1] exynos-fmp fmp: Found partno 25 for FMP test |
| [ 1.647226] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for FMP aes-xts passed |
| [ 1.649790] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for FMP aes-cbc passed |
| [ 1.649806] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for FMP sha256 passed |
| [ 1.649864] [6: swapper/0: 1] exynos-fmp fmp: FIPS: self-tests for UFSFMP hmac(sha256) passed |
| [ 1.649870] [6: swapper/0: 1] exynos-fmp fmp: exynos_fmp_fips_init: self-tests for FMP passed |
| [ 1.691112] [6: swapper/0: 1] FIPS(do_fmp_integrity_check): Integrity Check Passed |
| [ 1.691127] [6: swapper/0: 1] exynos-fmp fmp: exynos_fmp_fips_init: integrity check for FMP passed |
| [ 1.691172] [6: swapper/0: 1] exynos-fmp fmp: exynos_fmp_probe: Exynos FMP driver is proved |
| [ 1.695686] [6: swapper/0: 1] sec-battery battery: sec_battery_probe: SEC Battery Driver Loading |
| [ 1.695820] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(0) INPUT(1800) CHARGING(2100) |
| [ 1.695827] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(1) INPUT(500) CHARGING(500) |
| [ 1.695834] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(2) INPUT(1000) CHARGING(1000) |
| [ 1.695842] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(3) INPUT(1800) CHARGING(2100) |
| [ 1.695849] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(4) INPUT(500) CHARGING(500) |
| [ 1.695854] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(5) INPUT(1500) CHARGING(1500) |
| [ 1.695858] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(6) INPUT(1650) CHARGING(2150) |
| [ 1.695863] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(7) INPUT(1650) CHARGING(2150) |
| [ 1.695867] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(8) INPUT(1650) CHARGING(2150) |
| [ 1.695872] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(9) INPUT(1650) CHARGING(2150) |
| [ 1.695877] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(10) INPUT(900) CHARGING(1200) |
| [ 1.695882] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(11) INPUT(650) CHARGING(1200) |
| [ 1.695887] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(12) INPUT(900) CHARGING(1200) |
| [ 1.695892] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(13) INPUT(700) CHARGING(1200) |
| [ 1.695897] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(14) INPUT(900) CHARGING(1200) |
| [ 1.695902] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(15) INPUT(900) CHARGING(1200) |
| [ 1.695907] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(16) INPUT(650) CHARGING(1200) |
| [ 1.695912] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(17) INPUT(1800) CHARGING(2100) |
| [ 1.695916] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(18) INPUT(1800) CHARGING(2100) |
| [ 1.695922] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(19) INPUT(500) CHARGING(500) |
| [ 1.695927] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(20) INPUT(1800) CHARGING(2100) |
| [ 1.695933] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(21) INPUT(500) CHARGING(500) |
| [ 1.695938] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(22) INPUT(500) CHARGING(500) |
| [ 1.695943] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(23) INPUT(500) CHARGING(500) |
| [ 1.695948] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(24) INPUT(1000) CHARGING(450) |
| [ 1.695953] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(25) INPUT(1000) CHARGING(1000) |
| [ 1.695958] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(26) INPUT(2000) CHARGING(1800) |
| [ 1.695964] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(27) INPUT(900) CHARGING(1200) |
| [ 1.695968] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(28) INPUT(650) CHARGING(1200) |
| [ 1.695974] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(29) INPUT(500) CHARGING(1200) |
| [ 1.695978] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(30) INPUT(500) CHARGING(500) |
| [ 1.695984] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(31) INPUT(1800) CHARGING(2100) |
| [ 1.695989] [6: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(32) INPUT(1800) CHARGING(2100) |
| [ 1.695994] [6: swapper/0: 1] sec_bat_parse_dt : TOPOFF_1ST(300), TOPOFF_2ND(150) |
| [ 1.696035] [6: swapper/0: 1] sec_bat_parse_dt : battery_full_capacity : 3000 |
| [ 1.696050] [6: swapper/0: 1] sec_bat_parse_dt : set cisd_alg_index : 7 |
| [ 1.696074] [6: swapper/0: 1] sec_bat_parse_dt: Wireless charger name is Empty |
| [ 1.696152] [6: swapper/0: 1] sec_bat_parse_dt : usb_thermal_source is Empty |
| [ 1.696161] [6: swapper/0: 1] sec_bat_parse_dt : wpc_thermal_source is Empty |
| [ 1.696172] [6: swapper/0: 1] sec_bat_parse_dt : coil_thermal_source is Empty |
| [ 1.696181] [6: swapper/0: 1] sec_bat_parse_dt : slave_thermal_source is Empty |
| [ 1.696191] [6: swapper/0: 1] sec_bat_parse_dt : slave_chg_temp_check is Empty |
| [ 1.696202] [6: swapper/0: 1] sec_bat_parse_dt : chg_12v_high_temp is Empty |
| [ 1.696226] [6: swapper/0: 1] sec_bat_parse_dt : wpc_temp_check is Empty |
| [ 1.696278] [6: swapper/0: 1] sec_bat_parse_dt : pre_afc_work_delay is Empty |
| [ 1.696287] [6: swapper/0: 1] sec_bat_parse_dt : pre_wc_afc_input_current is Empty |
| [ 1.696296] [6: swapper/0: 1] sec_bat_parse_dt : pre_wc_afc_work_delay is Empty |
| [ 1.696333] [6: swapper/0: 1] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_NOLMAL(800), HIGHLIMIT_RECOVERY_NORMAL(750) |
| [ 1.696333] [6: swapper/0: 1] HIGH_THRESHOLD_NORMAL(500), HIGH_RECOVERY_NORMAL(450) LOW_THRESHOLD_NORMAL(0), LOW_RECOVERY_NORMAL(50) |
| [ 1.696333] [6: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(800), HIGHLIMIT_RECOVERY_LPM(750) |
| [ 1.696333] [6: swapper/0: 1] HIGH_THRESHOLD_LPM(500), HIGH_RECOVERY_LPM(450) LOW_THRESHOLD_LPM(0), LOW_RECOVERY_LPM(50) |
| [ 1.696402] [6: swapper/0: 1] sec_bat_parse_dt: chg_float_voltage_conv is Empty |
| [ 1.696413] [6: swapper/0: 1] sec_bat_parse_dt: wa volt recov is Empty |
| [ 1.696422] [6: swapper/0: 1] sec_bat_parse_dt: wa volt thr is Empty |
| [ 1.696431] [6: swapper/0: 1] sec_bat_parse_dt: wa float voltage is Empty |
| [ 1.696440] [6: swapper/0: 1] sec_bat_parse_dt : swelling fl check count is Empty |
| [ 1.696488] [6: swapper/0: 1] sec_bat_parse_dt : swelling drop voltage(set : 4150, condition : 4150) |
| [ 1.696503] [6: swapper/0: 1] sec_bat_parse_dt : SWELLING_HIGH_TEMP(410) SWELLING_HIGH_TEMP_RECOVERY(390) |
| [ 1.696503] [6: swapper/0: 1] SWELLING_LOW_TEMP_1st(150) SWELLING_LOW_TEMP_RECOVERY_1st(200) SWELLING_LOW_TEMP_2nd(50) SWELLING_LOW_TEMP_RECOVERY_2nd(100) SWELLING_LOW_CURRENT(700, 150), SWELLING_HIGH_CURRENT(1050, 150) |
| [ 1.696503] [6: swapper/0: 1] SWELLING_LOW_RCHG_VOL(4000), SWELLING_HIGH_RCHG_VOL(4000) |
| [ 1.696521] [6: swapper/0: 1] sec_bat_parse_dt : can't get wpc_en |
| [ 1.696536] [6: swapper/0: 1] sec_bat_parse_dt: [Long life] num_age_step : 5 |
| [ 1.696541] [6: swapper/0: 1] [0/4]cycle:0, float:4350, full_v:4250, recharge_v:4280, soc:93 |
| [ 1.696548] [6: swapper/0: 1] [1/4]cycle:200, float:4330, full_v:4230, recharge_v:4260, soc:92 |
| [ 1.696557] [6: swapper/0: 1] [2/4]cycle:250, float:4310, full_v:4210, recharge_v:4240, soc:91 |
| [ 1.696566] [6: swapper/0: 1] [3/4]cycle:300, float:4290, full_v:4190, recharge_v:4220, soc:90 |
| [ 1.696571] [6: swapper/0: 1] [4/4]cycle:1000, float:4240, full_v:4140, recharge_v:4170, soc:89 |
| [ 1.696632] [6: swapper/0: 1] sec_bat_parse_dt: vendor : Battery, technology : 2, cable_check_type : 4 |
| [ 1.696632] [6: swapper/0: 1] cable_source_type : 1, event_waiting_time : 0 |
| [ 1.696632] [6: swapper/0: 1] polling_type : 1, initial_count : 0, check_count : 0 |
| [ 1.696632] [6: swapper/0: 1] check_adc_max : 1440, check_adc_min : 0 |
| [ 1.696632] [6: swapper/0: 1] ovp_uvlo_check_type : 3, thermal_source : 2, chg_thermal_source : 2 |
| [ 1.696632] [6: swapper/0: 1] temp_check_type : 2, temp_check_count : 1 |
| [ 1.696632] [6: swapper/0: 1] chg_heating_prevention_method : 1 |
| [ 1.696754] [6: swapper/0: 1] sec_bat_set_current_event: current event before(0x0), after(0x0) |
| [ 1.696761] [6: swapper/0: 1] sec_battery_probe: init block_water_event = 0 |
| [ 1.696953] [6: swapper/0: 1] sec_battery_cisd_init: cisd.err_cap_high_thr:4000, cisd.err_cap_low_thr:3500, cisd.overflow_cap_thr:3300 |
| [ 1.699951] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 1.702665] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36) |
| [ 1.715542] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8) |
| [ 1.715552] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539) |
| [ 1.715559] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0) |
| [ 1.717777] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 315), avg current (-193)mA |
| [ 1.717787] [7: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 1.770587] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3866) |
| [ 1.770606] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 0 |
| [ 1.777412] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864) |
| [ 1.778674] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123) |
| [ 1.779311] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01) |
| [ 1.780578] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 7b6) |
| [ 1.780587] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-482)mA |
| [ 1.780596] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 1.802070] [6: swapper/0: 1] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xac, 0x05:0x7b, 0x06:0xb6, 0x07:0x07, 0x08:0x3a, 0x09:0x24, 0x0a:0x0c, 0x0b:0x1d, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 1.802081] [6: swapper/0: 1] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 1.802091] [6: swapper/0: 1] sec_battery_probe: Fail to set psy ((null)) |
| [ 1.802097] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=23 register |
| [ 1.802105] [6: swapper/0: 1] usb: [M] manager_notifier_register BATTERY: cable_type=70 (MUIC) |
| [ 1.802114] [6: swapper/0: 1] sec-battery battery: usb_typec_handle_notification: action (1) dump(0x6, 0x2, 0x01, 0x0000, 0x0000, 0x0046) |
| [ 1.802121] [6: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 1.802126] [6: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 1.802138] [6: swapper/0: 1] sec-battery battery: usb_typec_handle_notification: CMD[DETACH], CABLE_TYPE[1] |
| [ 1.802145] [6: swapper/0: 1] vbus_notifier_register: listener=1 register |
| [ 1.802154] [6: swapper/0: 1] vbus_handle_notification: action=1, vbus_status=1 |
| [ 1.802161] [6: swapper/0: 1] sec_battery_probe: Fail to s2mu004-charger set (43=>-22) |
| [ 1.802169] [6: swapper/0: 1] sec_bat_get_property cable type = 1 sleep_mode = 0 |
| [ 1.802175] [6: swapper/0: 1] sec-battery battery: sec_battery_probe: SEC Battery Driver Monitorwork |
| [ 1.802183] [6: swapper/0: 1] sec-battery battery: sec_battery_probe: SEC Battery Driver Loaded |
| [ 1.802189] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Start |
| [ 1.802197] [7: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x0), after(0x4) |
| [ 1.802204] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: End |
| [ 1.802237] [6: kworker/6:5: 1958] sec_bat_get_property cable type = 1 sleep_mode = 0 |
| [ 1.802607] [7: swapper/0: 1] [VIB] s2mu004_haptic_init |
| [ 1.802782] [7: swapper/0: 1] [VIB] 416 probe s2mu004_haptic_probe |
| [ 1.802790] [7: swapper/0: 1] s2mu004_haptic_parse_dt : start dt parsing |
| [ 1.802850] [7: swapper/0: 1] [VIB] : s2mu004_haptic_parse_dt : motor_type value 1 |
| [ 1.802868] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : max_timeout = 10000 |
| [ 1.802873] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : duty = 2403846 |
| [ 1.802879] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : period = 4807692 |
| [ 1.802886] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : max_duty = 0x5c |
| [ 1.802890] [7: swapper/0: 1] [VIB] s2mu004_haptic_parse_dt : pwm_id = 0 |
| [ 1.803109] [6: swapper/0: 1] [VIB] request pwm, success: |
| [ 1.803514] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123) |
| [ 1.804896] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01) |
| [ 1.807756] [7: swapper/0: 1] [VIB] s2mu004_haptic_probe : S2MU004_REG_HAPTIC_MODE[0xe] = 0x20 |
| [ 1.816318] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864) |
| [ 1.818052] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_probe |
| [ 1.818537] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 7b6) |
| [ 1.818544] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-482)mA |
| [ 1.819172] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_init_configure : Initial abnormal state to LPM Mode |
| [ 1.823287] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 315), avg current (-193)mA |
| [ 1.823295] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 1.825491] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123) |
| [ 1.826789] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_set_lpm_mode s2mu004 enter lpm mode |
| [ 1.826798] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_set_cc_control, (0) |
| [ 1.827425] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01) |
| [ 1.830979] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_temperature: temperature (290) |
| [ 1.832877] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 1.835400] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36) |
| [ 1.848206] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8) |
| [ 1.848216] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539) |
| [ 1.848224] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0) |
| [ 1.850374] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 315), avg current (-193)mA |
| [ 1.850383] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 1.902930] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3866) |
| [ 1.902943] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56 |
| [ 1.909716] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3864) |
| [ 1.910965] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (172) data1 (123) |
| [ 1.911596] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3864), src (0x01) |
| [ 1.912841] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 7b6) |
| [ 1.912848] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-482)mA |
| [ 1.912855] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 1.933910] [6: kworker/u16:0: 6] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x02, 0x02:0x00, 0x03:0x1c, 0x04:0xac, 0x05:0x7b, 0x06:0xb6, 0x07:0x07, 0x08:0x3a, 0x09:0x24, 0x0a:0x0c, 0x0b:0x1d, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 1.933921] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 1.933934] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_get_battery_info:Vnow(3864mV),Inow(-482mA),Imax(500mA),Ichg(0mA),SOC(56%),Tbat(259), Tusb(0), Tchg(290),Twpc(0) |
| [ 1.933942] [6: kworker/u16:0: 6] sec_bat_swelling_check: swelling highblock(410), highrecov(390) |
| [ 1.934581] [6: kworker/u16:0: 6] sec_bat_swelling_check: status(2), swell_mode(0:0:0), cv(4350)mV, temp(259) |
| [ 1.934590] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4) |
| [ 1.934596] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x0) |
| [ 1.934602] [6: kworker/u16:0: 6] sec_bat_calculate_safety_time : EXPIRED_TIME(10380000), IP(0), CP(0), CURR(0), STANDARD(2150) |
| [ 1.935706] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_input_current_limit: current 500, 0x12 |
| [ 1.953280] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x03, 0x0b:0x00, 0x0c:0x03, 0x0d:0x01, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x1b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 1.953290] [6: kworker/u16:0: 6] [DEBUG] s2mu004_chg_set_property: is_charging 0 |
| [ 1.970897] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x03, 0x0b:0x00, 0x0c:0x03, 0x0d:0x01, 0x0e:0x12, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x12, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x06, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x1b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 1.970905] [6: kworker/u16:0: 6] sec_bat_set_charging_current: power(0), input(500), charge(500) |
| [ 1.970914] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_topoff_current: current 300 |
| [ 1.972011] [6: kworker/u16:0: 6] [MUIC_HV] s2mu004_hv_muic_charger_init |
| [ 1.972024] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0) |
| [ 1.972033] [6: kworker/6:5: 1958] [MUIC_HV] s2mu004_hv_muic_detect_after_charger_init |
| [ 1.972052] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(NONE), sleep_mode(0), Cycle(-1) |
| [ 1.972068] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_set_polling: Status:Discharging, Sleep:No, Charging:No, Short Poll:No |
| [ 1.972095] [6: kworker/6:4: 1957] sec_bat_get_property cable type = 1 sleep_mode = 0 |
| [ 1.972130] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_set_polling: Polling time 30/30 sec. |
| [ 1.972666] [6: kworker/6:5: 1958] [MUIC_HV] s2mu004_hv_muic_detect_after_charger_init STATUS3:0x00 |
| [ 1.987146] [6: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_set_normal_mode s2mu004 exit lpm mode |
| [ 1.987154] [6: swapper/0: 1] usbpd_init_counters: init counter |
| [ 1.987162] [6: swapper/0: 1] usbpd_init_manager |
| [ 1.987318] [6: swapper/0: 1] usbpd_init_manager done |
| [ 1.993119] [7: swapper/0: 1] ccic_notifier_init |
| [ 1.993127] [7: swapper/0: 1] ccic_notifier_init already registered |
| [ 1.993287] [6: swapper/0: 1] wake enabled for irq 211 |
| [ 1.993305] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 1.996176] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x2 0x0 0x1 0x0 0x74 0x80 0x0] |
| [ 1.996195] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_usbpd_detach_init |
| [ 1.996210] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_usbpd_set_cc_control, (0) |
| [ 1.996225] [0:irq/211-s2mu004: 1980] usbpd_manager_plug_detach: usbpd plug detached |
| [ 1.996239] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: usbpd_policy_reset DETACHED |
| [ 1.996254] [0:irq/211-s2mu004: 1980] usbpd_init_counters: init counter |
| [ 1.996267] [0:irq/211-s2mu004: 1980] usbpd_init_manager_val |
| [ 2.002466] [0:irq/211-s2mu004: 1980] s2mu004_set_vconn_source, not support vconn source |
| [ 2.003107] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_check_port_detect, PLUG Error |
| [ 2.003124] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc07f09e380) |
| [ 2.003144] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc07f09e300) |
| [ 2.003156] [6: kworker/u16:2: 241] usb:ccic_event_notifier, dest=MUIC, id=ID_ATTACH, attach=0, event=0, event_work=ffffffc07f09e380 |
| [ 2.003168] [6: kworker/u16:2: 241] ccic_notifier_notify: src:5 dest:4 id:01 attach:00 cable_type:00 rprd:0 |
| [ 2.003178] [6: kworker/u16:2: 241] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_ATTACH attach/rid:0 |
| [ 2.003191] [6: kworker/u16:2: 241] usb: [M] manager_handle_ccic_notification: CCIC_NOTIFY_DETACH (pd=0, cable_type=0) |
| [ 2.003204] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_ATTACH sub1:00 sub2:00 sub3:00 |
| [ 2.003217] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: Rcvd Noti=> action: 1 src:5 dest:4 id:1 sub[0 0 0], muic_if : ffffffc07f50a000 |
| [ 2.003221] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0 |
| [ 2.003230] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: NOTIFY_ID_ATTACH: Detached |
| [ 2.003938] [6: kworker/u16:2: 241] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.003945] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_attach: src:5 dest:4 id:1 attach:0 cable_type:0 rprd:0 |
| [ 2.003952] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_detach |
| [ 2.003958] [6: kworker/u16:2: 241] [MUIC] s2mu004_if_com_to_open_with_vbus |
| [ 2.004738] [6: kworker/u16:2: 241] [MUIC] s2mu004_muic_set_com_sw MANSW reg(0x2), just pass |
| [ 2.004746] [6: kworker/u16:2: 241] [MUIC] muic_core_get_ccic_cable_state call, attached_dev : 0 |
| [ 2.004755] [6: kworker/u16:2: 241] [MUIC] muic_jig_uart_cb: MUIC uart type(0) |
| [ 2.004765] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_detach_always |
| [ 2.004774] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0 |
| [ 2.004781] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.004787] [6: kworker/u16:2: 241] ccic_notifier_notify: notify done(0x0) |
| [ 2.004794] [6: kworker/u16:2: 241] usb:ccic_event_notifier, dest=MUIC, id=ID_RID, attach=7, event=0, event_work=ffffffc07f09e300 |
| [ 2.004800] [6: kworker/u16:2: 241] ccic_notifier_notify: src:5 dest:4 id:02 rid:07 |
| [ 2.004807] [6: kworker/u16:2: 241] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_RID attach/rid:7 |
| [ 2.004812] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_RID sub1:07 sub2:00 sub3:00 |
| [ 2.004818] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: Rcvd Noti=> action: 2 src:5 dest:4 id:2 sub[7 0 0], muic_if : ffffffc07f50a000 |
| [ 2.004824] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0 |
| [ 2.004829] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_notification: NOTIFY_ID_RID |
| [ 2.004834] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_rid: src:5 dest:4 id:2 rid:7 sub2:0 sub3:0 |
| [ 2.004839] [6: kworker/u16:2: 241] [MUIC] muic_manager_handle_ccic_rid: RID but No ATTACH->discarded |
| [ 2.004844] [6: kworker/u16:2: 241] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0 |
| [ 2.004849] [6: kworker/u16:2: 241] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.004854] [6: kworker/u16:2: 241] ccic_notifier_notify: notify done(0x0) |
| [ 2.005600] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_check_port_detect, PLUG Error |
| [ 2.006427] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_check_rid : attached rid state(0) |
| [ 2.006438] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.007952] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x1 0x0 0x0 0x0 0x0] |
| [ 2.007967] [7: swapper/0: 1] [MUIC] muic_ccic_notifier_register: listener=5 register |
| [ 2.007980] [7: swapper/0: 1] type3_handle_notification action:4, attached_dev:52, lpm:0, pdic_data->is_otg_vboost:0, pdic_data->is_otg_reboost:0 |
| [ 2.008059] [7: swapper/0: 1] dual_role_get_local_prop : usbpd_data is null : request prop = 1 |
| [ 2.008066] [7: swapper/0: 1] dual_role_usb otg_default: driver failed to report `mode' property: -22 |
| [ 2.008078] [7: swapper/0: 1] usbpd-s2mu004 5-003c: s2mu004_usbpd_probe s2mu004 usbpd driver uploaded! |
| [ 2.008304] [7: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin gpg3-5 already requested by 139b0000.pinctrl; cannot claim for spi4.0 |
| [ 2.008312] [7: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: pin-131 (spi4.0) status -22 |
| [ 2.008319] [7: swapper/0: 1] samsung-pinctrl 139b0000.pinctrl: could not request pin 131 (gpg3-5) from group gpg3-5 on device samsung-pinctrl |
| [ 2.008325] [7: swapper/0: 1] ssp spi4.0: Error applying setting, reverse things back |
| [ 2.008358] [7: swapper/0: 1] [SSP] ssp_probe( 474): |
| [ 2.008369] [7: swapper/0: 1] [SSP] mcu_int1=16 |
| [ 2.008375] [7: swapper/0: 1] [SSP] mcu_int2=17 |
| [ 2.008388] [7: swapper/0: 1] [SSP] ap_int=116 |
| [ 2.008398] [7: swapper/0: 1] [SSP] rst=131 |
| [ 2.008407] [7: swapper/0: 1] [SSP] boot0=113 |
| [ 2.008444] [7: swapper/0: 1] [SSP] acc-posi[7] mag-posi[5] |
| [ 2.008451] [7: swapper/0: 1] [SSP] hi-thresh[55] low-thresh[40] |
| [ 2.008451] [7: swapper/0: 1] |
| [ 2.008462] [7: swapper/0: 1] [SSP] detect-hi[250] detect-low[130] |
| [ 2.008462] [7: swapper/0: 1] |
| [ 2.008473] [7: swapper/0: 1] [SSP] acc-type = 1 |
| [ 2.008479] [7: swapper/0: 1] [SSP] pressure-type = 1 |
| [ 2.008486] [7: swapper/0: 1] [SSP] mag-type = 1 |
| [ 2.008492] [7: swapper/0: 1] [SSP] this project = 1 |
| [ 2.008519] [7: swapper/0: 1] |
| [ 2.008519] [7: swapper/0: 1] ##################################################### |
| [ 2.008531] [7: swapper/0: 1] [SSP] initialize_variable( 70): initialize_variable. |
| [ 2.008617] [7: kworker/7:3: 1772] usbpd_policy_work : usbpd cable is empty |
| [ 2.008624] [7: kworker/7:3: 1772] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.008638] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 1 , attached_state = 0, power_role_dual = 0 |
| [ 2.008645] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 2 , attached_state = 0, power_role_dual = 0 |
| [ 2.008651] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 3 , attached_state = 0, power_role_dual = 0 |
| [ 2.008657] [7: kworker/7:3: 1772] dual_role_get_local_prop : request prop = 4 , attached_state = 0, power_role_dual = 0 |
| [ 2.008723] [7: swapper/0: 1] [SSP] init accelerometer_sensor iio dev, type = 1 |
| [ 2.008879] [7: swapper/0: 1] [SSP] init geomagnetic_sensor iio dev, type = 2 |
| [ 2.009029] [7: swapper/0: 1] [SSP] init gyro_sensor iio dev, type = 4 |
| [ 2.009160] [0: swapper/0: 1] [SSP] init light_sensor iio dev, type = 5 |
| [ 2.009279] [7: swapper/0: 1] [SSP] init pressure_sensor iio dev, type = 6 |
| [ 2.009380] [0: swapper/0: 1] [SSP] init proximity_sensor iio dev, type = 8 |
| [ 2.009493] [7: swapper/0: 1] [SSP] init uncal_geomagnetic_sensor iio dev, type = 14 |
| [ 2.009605] [0: swapper/0: 1] [SSP] init uncal_gyro_sensor iio dev, type = 16 |
| [ 2.009713] [7: swapper/0: 1] [SSP] init sig_motion_sensor iio dev, type = 17 |
| [ 2.009789] [7: swapper/0: 1] [SSP] init step_det_sensor iio dev, type = 18 |
| [ 2.009890] [0: swapper/0: 1] [SSP] init step_cnt_sensor iio dev, type = 19 |
| [ 2.010044] [7: swapper/0: 1] [SSP] init geomagnetic_rotation_vector_sensor iio dev, type = 20 |
| [ 2.010122] [7: swapper/0: 1] [SSP] init tilt_detector iio dev, type = 22 |
| [ 2.010231] [0: swapper/0: 1] [SSP] init pickup_gesture iio dev, type = 25 |
| [ 2.010392] [7: swapper/0: 1] [SSP] init meta_event iio dev, type = 27 |
| [ 2.010506] [0: swapper/0: 1] [SSP] init geomagnetic_power iio dev, type = 30 |
| [ 2.010661] [7: swapper/0: 1] [SSP] init interrupt_gyro_sensor iio dev, type = 31 |
| [ 2.010827] [6: swapper/0: 1] [SSP] requesting IRQ 212 |
| [ 2.011017] [0:irq/212-SSP_Int: 2001] [SSP] parse_dataframe( 354): ssp shutdown, do not parse |
| [ 2.011312] [7: swapper/0: 1] [SSP] initialize_mobeam |
| [ 2.011412] [7: swapper/0: 1] input: ssp_context as /devices/virtual/input/input5 |
| [ 2.011791] [6: swapper/0: 1] [SSP] ssp_enable( 21): enable = 1, is_shutdown = 1 |
| [ 2.011806] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 4 type 255 subcmd 12 send_buf_len 0 timeout 1000 |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] [SSP] [M] MGI1 |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] MGI2 |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] #>l init |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] #>p init |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] #>pr init |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] RESET |
| [ 2.012079] [0:irq/212-SSP_Int: 2001] TxRetry 2 |
| [ 2.017268] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.018022] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 1000, status 0 |
| [ 2.018029] [6: swapper/0: 1] [SSP] ssp_send_command( 350): receive_buf length = 4 |
| [ 2.018035] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.018041] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.018047] [6: swapper/0: 1] [SSP] MCU Firm Rev : Old = 17112200, New = 17112200 |
| [ 2.018053] [6: swapper/0: 1] [SSP] clean_pending_list( 290): IN |
| [ 2.018058] [6: swapper/0: 1] [SSP] clean_pending_list( 302): OUT |
| [ 2.018063] [6: swapper/0: 1] [SSP] initialize_mcu( 114): is_shutdown = 0 |
| [ 2.018070] [6: swapper/0: 1] [SSP] set_sensor_position( 59): |
| [ 2.018075] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 1 subcmd 26 send_buf_len 4 timeout 0 |
| [ 2.018895] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x1 0x0 0x60 0x0 0x0] |
| [ 2.019546] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: SINK |
| [ 2.021755] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: usbpd_policy_reset ATTACHED |
| [ 2.021770] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_check_port_detect 2175: is_host = 0, is_client = 0 |
| [ 2.021785] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc86f5d2c00) |
| [ 2.021805] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc86f5d2c80) |
| [ 2.021812] [6: kworker/u16:0: 6] usb:ccic_event_notifier, dest=MUIC, id=ID_ATTACH, attach=1, event=0, event_work=ffffffc86f5d2c00 |
| [ 2.021824] [6: kworker/u16:0: 6] ccic_notifier_notify: src:5 dest:4 id:01 attach:01 cable_type:00 rprd:0 |
| [ 2.021832] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_ATTACH attach/rid:1 |
| [ 2.021842] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: CCIC_NOTIFY_ATTACH |
| [ 2.021854] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_ATTACH sub1:01 sub2:00 sub3:00 |
| [ 2.021866] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_notification: Rcvd Noti=> action: 1 src:5 dest:4 id:1 sub[1 0 0], muic_if : ffffffc07f50a000 |
| [ 2.021875] [6: kworker/u16:0: 6] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:0 legacy_dev:0 |
| [ 2.021880] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_notification: NOTIFY_ID_ATTACH: Attached |
| [ 2.021886] [0:irq/211-s2mu004: 1980] usb: ccic_event_work, dest=1, event=2, usbpd_data->data_role_dual=0, usbpd_data->try_state_change=0 |
| [ 2.021944] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 1 , attached_state = 2, power_role_dual = 1 |
| [ 2.021963] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 2 , attached_state = 2, power_role_dual = 1 |
| [ 2.021982] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 3 , attached_state = 2, power_role_dual = 1 |
| [ 2.021998] [0: kworker/0:1: 1183] dual_role_get_local_prop : request prop = 4 , attached_state = 2, power_role_dual = 1 |
| [ 2.022543] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.022550] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_ccic_attach: src:5 dest:4 id:1 attach:1 cable_type:0 rprd:0 |
| [ 2.022556] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_ccic_attach: Attach |
| [ 2.022562] [6: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 0th ... |
| [ 2.024286] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 2.024293] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.024301] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.024308] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 4 subcmd 26 send_buf_len 4 timeout 0 |
| [ 2.027710] [0:irq/212-SSP_Int: 2001] [SSP] [M] ACC AXIS = 7 |
| [ 2.030515] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 2.030522] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.030528] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.030535] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 2 subcmd 26 send_buf_len 4 timeout 0 |
| [ 2.033986] [0:irq/212-SSP_Int: 2001] [SSP] [M] GYRO AXIS = 7 |
| [ 2.036754] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 2.036762] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.036770] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.036778] [6: swapper/0: 1] [SSP] Sensor Posision A : 7, G : 7, M: 5, P: 0 |
| [ 2.036786] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 4 type 255 subcmd 27 send_buf_len 0 timeout 1000 |
| [ 2.040220] [0:irq/212-SSP_Int: 2001] [SSP] [M] MAG AXIS = 5 |
| [ 2.043090] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 1000, status 0 |
| [ 2.043100] [6: swapper/0: 1] [SSP] ssp_send_command( 350): receive_buf length = 8 |
| [ 2.043109] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.043115] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.043123] [6: swapper/0: 1] [SSP] state(0x1f24f4176): 111110010010011110100000101110110 |
| [ 2.043127] [6: swapper/0: 1] [SSP] state2: 0000000000000000000011010111111 |
| [ 2.043134] [6: swapper/0: 1] [SSP] initialize_mcu( 128): sensor state 0x1f24f4176 |
| [ 2.043141] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 2 subcmd 32 send_buf_len 27 timeout 0 |
| [ 2.048239] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.048245] [6: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 1th ... |
| [ 2.048259] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, 10k check : cc1_val(2), cc2_val(4) |
| [ 2.049364] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 2.049371] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.049376] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.049384] [6: swapper/0: 1] [SSP] set_pdc_matrix: finished |
| [ 2.049391] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 5 subcmd 34 send_buf_len 28 timeout 0 |
| [ 2.055701] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 2.055709] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.055717] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.055725] [6: swapper/0: 1] [SSP]: set_light_coef - -830 1100 -1180 1000 842 3521 2095 |
| [ 2.055733] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 4 type 255 subcmd 12 send_buf_len 0 timeout 1000 |
| [ 2.059293] [0:irq/212-SSP_Int: 2001] [SSP] [M] #>l set COEF -830 1100 -1180 1000 842 3521 2095 |
| [ 2.062031] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 1000, status 0 |
| [ 2.062040] [6: swapper/0: 1] [SSP] ssp_send_command( 350): receive_buf length = 4 |
| [ 2.062048] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.062056] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.062061] [6: swapper/0: 1] [SSP] MCU Firm Rev : New = 17112200 |
| [ 2.062069] [6: swapper/0: 1] [SSP] ssp_send_command( 334): cmd 3 type 255 subcmd 1 send_buf_len 0 timeout 0 |
| [ 2.068379] [6: swapper/0: 1] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 2.068388] [6: swapper/0: 1] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 2.068396] [6: swapper/0: 1] [SSP] clean_msg( 74): kfree(msg) |
| [ 2.068404] [6: swapper/0: 1] [SSP] ssp_send_status( 376): command 0xd3 |
| [ 2.068413] [6: swapper/0: 1] [SSP] ssp_probe( 578): probe success! |
| [ 2.068417] [6: swapper/0: 1] ##################################################### |
| [ 2.068417] [6: swapper/0: 1] |
| [ 2.068471] [6: swapper/0: 1] samsung_abox_dump_late_initcall |
| [ 2.068497] [6: swapper/0: 1] samsung_abox_log_late_initcall |
| [ 2.068520] [6: swapper/0: 1] samsung_abox_late_initcall |
| [ 2.068896] [6: swapper/0: 1] ALSA device list: |
| [ 2.068904] [6: swapper/0: 1] #0: Exynos7885-COD3035 |
| [ 2.068912] [6: swapper/0: 1] #1: dspg-dbmdx |
| [ 2.068964] [6: swapper/0: 1] Warning: unable to open an initial console. |
| [ 2.069773] [6: swapper/0: 1] Freeing unused kernel memory: 4280K (ffffffc000f7b000 - ffffffc0013a9000) |
| [ 2.069794] [6: swapper/0: 1] Freeing alternatives memory: 56K (ffffffc0013a9000 - ffffffc0013b7000) |
| [ 2.071943] [7: init: 1] !@Boot: start init process |
| [ 2.072170] [7: init: 1] init: init first stage started! |
| [ 2.072326] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:kernel RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.072333] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, 56k check : cc1_val(4), cc2_val(4) |
| [ 2.072343] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.072348] [0:irq/211-s2mu004: 1980] usb: ccic_event_work,event_work(ffffffc86f5d2e80) |
| [ 2.072357] [6: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 2th ... |
| [ 2.076003] [7: init: 1] SELinux: 8192 avtab hash slots, 18765 rules. |
| [ 2.082746] [7: init: 1] SELinux: 8192 avtab hash slots, 18765 rules. |
| [ 2.082851] [7: init: 1] SELinux: 1 users, 2 roles, 2227 types, 0 bools, 1 sens, 1024 cats |
| [ 2.082859] [7: init: 1] SELinux: 63 classes, 18765 rules |
| [ 2.085014] [7: init: 1] SELinux: Completing initialization. |
| [ 2.085024] [7: init: 1] SELinux: Setting up existing superblocks. |
| [ 2.096558] [7: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.096569] [7: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 3th ... |
| [ 2.098540] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, vbus short check(0) : cc1_val(1), cc2_val(4) |
| [ 2.107275] [7: init: 1] init: SELinux: Loaded policy from /sepolicy |
| [ 2.108554] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_vbus_short_check, cc short check success (26) |
| [ 2.109886] [0: kworker/0:1: 1183] usbpd_policy_work, 0 |
| [ 2.109900] [0: kworker/0:1: 1183] usbpd_policy_work, SINK |
| [ 2.109917] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_startup |
| [ 2.109931] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: s2mu004_usbpd_set_cc_control, (1) |
| [ 2.111058] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_wait_for_capabilities |
| [ 2.111069] [0: kworker/0:1: 1183] usbpd_wait_msg, 505 |
| [ 2.120026] [6: init: 1] init: (Initializing SELinux enforcing took 0.05s.) |
| [ 2.120304] [6: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:kernel:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.120345] [7: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.120353] [7: kworker/u16:0: 6] [MUIC] muic_manager_is_valid_rid_open: 4th ... |
| [ 2.122739] [6: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin. |
| [ 2.125040] [7: init: 1] init: init second stage started! |
| [ 2.131985] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.134365] [7: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin. |
| [ 2.134486] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.135312] [7: init: 1] init: Running restorecon... |
| [ 2.148863] [6: kworker/u16:0: 6] [MUIC] s2mu004_muic_get_vbus_state vbus : (0) |
| [ 2.148873] [6: kworker/u16:0: 6] [MUIC] muic_manager_handle_ccic_attach: No VBUS-> doing nothing. |
| [ 2.148880] [6: kworker/u16:0: 6] [MUIC] muic_manager_show_status: attached_dev:0 rid:0 rprd:0 attached:1 legacy_dev:0 |
| [ 2.148888] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.148893] [6: kworker/u16:0: 6] ccic_notifier_notify: notify done(0x0) |
| [ 2.148904] [6: kworker/u16:0: 6] usb:ccic_event_notifier, dest=USB, id=ID_USB, attach=Attached, drp=USB_ATTACH_UFP, event_work=ffffffc86f5d2c80 |
| [ 2.148911] [6: kworker/u16:0: 6] ccic_notifier_notify: src:5 dest:1 id:03 sub1:1 sub2:02 sub3:00 |
| [ 2.148918] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: src:CCIC dest:USB id:ID_USB attach/rid:1 |
| [ 2.148925] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: src:CCIC dest:USB id:ID_USB sub1:01 sub2:02 sub3:00 |
| [ 2.148935] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: action (3) dump(0x5, 0x1, 0x03, 0x0001, 0x0002, 0x0000) |
| [ 2.148942] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: skip handler dest(1) |
| [ 2.148948] [6: kworker/u16:0: 6] usb_notifier: ccic_usb_handle_notification: Turn On Device(UFP) |
| [ 2.148954] [6: kworker/u16:0: 6] usb_notify: send_otg_notify event=vbus(1) enable=1 |
| [ 2.148959] [6: kworker/u16:0: 6] usb_notify: send_otg_notify reserve event |
| [ 2.148964] [6: kworker/u16:0: 6] usb_notify: is_blocked type=2, disable_state=0 |
| [ 2.148969] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.148974] [6: kworker/u16:0: 6] ccic_notifier_notify: notify done(0x0) |
| [ 2.148980] [6: kworker/u16:0: 6] usb:ccic_event_notifier, dest=BATTERY, id=ID_POWER_STATUS, attach=1, event=0, event_work=ffffffc86f5d2e80 |
| [ 2.148985] [6: kworker/u16:0: 6] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.148991] [6: kworker/u16:0: 6] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.148996] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.149003] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.149009] [6: kworker/u16:0: 6] sec-battery battery: usb_typec_handle_notification: battery->rp_currentlvl(2) |
| [ 2.149015] [6: kworker/u16:0: 6] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.149019] [6: kworker/u16:0: 6] ccic_notifier_notify: notify done(0x0) |
| [ 2.163462] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00) |
| [ 2.164199] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00) |
| [ 2.164984] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00) |
| [ 2.165717] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00) |
| [ 2.167135] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x20, 0x01) |
| [ 2.167151] [0:irq/131-s2mu004: 1241] [MUIC] muic-rid_chg S2MU004_FIRST_ATTACH start |
| [ 2.167793] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1) |
| [ 2.168433] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 1, irq_num : 28 |
| [ 2.168445] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 28 |
| [ 2.168458] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_FIRST_ATTACH done |
| [ 2.168472] [0:irq/131-s2mu004: 1241] [MUIC] muic-vbus_on S2MU004_FIRST_ATTACH start |
| [ 2.169111] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1) |
| [ 2.169753] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x0, vbvolt : 1, irq_num : 29 |
| [ 2.169766] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 1, irq_num: 29 |
| [ 2.192657] [0:irq/131-s2mu004: 1241] [MUIC] dev[1:0x80, 2:0x00, 3:0x00] |
| [ 2.192673] [0:irq/131-s2mu004: 1241] [MUIC] adc:0x00, vbvolt:0x01, apple:0x06 |
| [ 2.192687] [0:irq/131-s2mu004: 1241] [MUIC] chg_type:0x00, vmid:0x01, dev_id:0x38 |
| [ 2.192702] [0:irq/131-s2mu004: 1241] [MUIC] muic_pdic_notifier_attach_attached_dev: (52) |
| [ 2.192715] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: CMD=4, DATA=52 |
| [ 2.192733] [0:irq/131-s2mu004: 1241] type3_handle_notification action:4, attached_dev:52, lpm:0, pdic_data->is_otg_vboost:0, pdic_data->is_otg_reboost:0 |
| [ 2.192746] [0:irq/131-s2mu004: 1241] [MUIC] muic_ccic_notifier_notify: notify done(0x0) |
| [ 2.192760] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_detect_second_attach change mode to second attach! |
| [ 2.192774] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_control_rid_adc (Disable) |
| [ 2.244501] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.246316] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x21 0x0 0x8 0xc0 0x0] |
| [ 2.246349] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_evaluate_capability |
| [ 2.248597] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: [Rx] [0x1161] [0x3601912c] |
| [ 2.248614] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: [1] FIXED volt(5000)mV, max current(3000) |
| [ 2.248626] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_select_capability |
| [ 2.251712] [0: kworker/0:1: 1183] usbpd_wait_msg, 505 |
| [ 2.256410] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.257890] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x3 0x0 0x1 0x0 0xc 0x80 0x0] |
| [ 2.257916] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_transition_sink |
| [ 2.257928] [0: kworker/0:1: 1183] usbpd_wait_msg, 505 |
| [ 2.291493] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.293121] [0:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x10 0x1 0x0 0x8 0xc0 0x0] |
| [ 2.293147] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: got PS_READY. |
| [ 2.293159] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.293172] [0: kworker/0:1: 1183] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc0 |
| [ 2.293183] [0: kworker/0:1: 1183] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.293198] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.293210] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.293222] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc0 sub3:ffff |
| [ 2.293240] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc0, 0xffff) |
| [ 2.293258] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.293270] [0: kworker/0:1: 1183] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.293283] [0: kworker/0:1: 1183] make_pd_list: total pd_list_index: 1 |
| [ 2.293295] [0: kworker/0:1: 1183] make_pd_list: Made pd_list[0], voltage : 5000, current : 3000, index : 1 |
| [ 2.293307] [0: kworker/0:1: 1183] sec-battery battery: make_pd_list: battery->pdic_ps_rdy(1) |
| [ 2.293321] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.293335] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.293357] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.293370] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.293381] [0: kworker/0:1: 1183] ccic_notifier_notify: notify done(0x0) |
| [ 2.293394] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.293407] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.293418] [0: kworker/0:1: 1183] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.293425] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Start |
| [ 2.293435] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x0), after(0x4) |
| [ 2.293443] [6: kworker/u16:0: 6] sec_bat_get_input_current_in_power_list:max_input_current : 3000mA |
| [ 2.293448] [6: kworker/u16:0: 6] sec_bat_get_charging_current_in_power_list:pd_charge_power : 15000000mW, max_charging_current : 2150mA |
| [ 2.293455] [0: kworker/0:1: 1183] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.293464] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.293473] [0: kworker/0:1: 1183] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.293481] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.293493] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.293502] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.293508] [6: kworker/u16:0: 6] [DEBUG]s2mu004_chg_set_property: float voltage(4350) |
| [ 2.293515] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_regulation_voltage: float_voltage 4350 |
| [ 2.293529] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.293540] [0: kworker/0:1: 1183] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.293568] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.293579] [0: kworker/0:1: 1183] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.293599] [0: kworker/0:1: 1183] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.293611] [0: kworker/0:1: 1183] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.293631] [0: kworker/0:1: 1183] ccic_notifier_notify: notify done(0x0) |
| [ 2.293643] [0: kworker/0:1: 1183] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.294645] [6: kworker/u16:0: 6] sec_bat_cable_work: float voltage = 4350 |
| [ 2.294656] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4) |
| [ 2.294672] [6: kworker/u16:0: 6] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 2.294679] [6: kworker/u16:0: 6] [DEBUG]s2mu004_enable_charger_switch: turn on charger |
| [ 2.295619] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_bcd_rescan |
| [ 2.297226] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_SECOND_ATTACH done |
| [ 2.297981] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x80) |
| [ 2.298806] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00) |
| [ 2.299452] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00) |
| [ 2.300122] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00) |
| [ 2.300168] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.301550] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x02, 0x04) |
| [ 2.301704] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x21 0x0 0x8 0x80 0x0] |
| [ 2.301738] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.301752] [1: kworker/1:1: 1962] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.301763] [1: kworker/1:1: 1962] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.301780] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.301791] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.301804] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.301824] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.301838] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.301851] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.301864] [1: kworker/1:1: 1962] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.301878] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.301890] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.301918] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.301930] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.301942] [1: kworker/1:1: 1962] ccic_notifier_notify: notify done(0x0) |
| [ 2.301955] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_evaluate_capability |
| [ 2.302200] [0:irq/131-s2mu004: 1241] [IRQ] s2mu004_chg_isr , STATUS0 : 63 |
| [ 2.302200] [0:irq/131-s2mu004: 1241] |
| [ 2.302213] [0:irq/131-s2mu004: 1241] s2mu004_chg_isr: Vbus status 0x63 |
| [ 2.302213] [0:irq/131-s2mu004: 1241] <6>[ 2.303349] [0:irq/131-s2mu004: 1241] [MUIC] muic-detach S2MU004_SECOND_ATTACH start |
| [ 2.303888] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: [Rx] [0x1761] [0x2601912c] |
| [ 2.303904] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: [1] FIXED volt(5000)mV, max current(3000) |
| [ 2.303918] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_select_capability |
| [ 2.304001] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1) |
| [ 2.304651] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 1, irq_num : 24 |
| [ 2.304665] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 2, irq_num: 24 |
| [ 2.304679] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_SECOND_ATTACH done |
| [ 2.304695] [0:irq/131-s2mu004: 1241] [MUIC] muic-adc_change S2MU004_SECOND_ATTACH start |
| [ 2.305349] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1) |
| [ 2.305998] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 1, irq_num : 31 |
| [ 2.306010] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 2, irq_num: 31 |
| [ 2.306021] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_NONE_MUIC S2MU004_SECOND_ATTACH done |
| [ 2.307191] [1: kworker/1:1: 1962] usbpd_wait_msg, 505 |
| [ 2.311848] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.313383] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x3 0x0 0x1 0x0 0xc 0x80 0x0] |
| [ 2.313414] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_transition_sink |
| [ 2.313427] [1: kworker/1:1: 1962] usbpd_wait_msg, 505 |
| [ 2.346998] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.348769] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x10 0x1 0x0 0x8 0x80 0x0] |
| [ 2.348806] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.348835] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: got PS_READY. |
| [ 2.348848] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.348862] [1: kworker/1:1: 1962] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc0 |
| [ 2.348872] [1: kworker/1:1: 1962] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.348891] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.348902] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.348916] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc0 sub3:ffff |
| [ 2.348934] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc0, 0xffff) |
| [ 2.348948] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.348961] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.348974] [1: kworker/1:1: 1962] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.348987] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.348998] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.349025] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.349038] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.349050] [1: kworker/1:1: 1962] ccic_notifier_notify: notify done(0x0) |
| [ 2.349068] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.349082] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.349098] [1: kworker/1:1: 1962] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.349108] [1: kworker/1:1: 1962] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.349121] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.349131] [1: kworker/1:1: 1962] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.349145] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.349159] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.349173] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.349185] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.349199] [1: kworker/1:1: 1962] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.349213] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.349224] [1: kworker/1:1: 1962] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.349243] [1: kworker/1:1: 1962] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.349256] [1: kworker/1:1: 1962] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.349269] [1: kworker/1:1: 1962] ccic_notifier_notify: notify done(0x0) |
| [ 2.349282] [1: kworker/1:1: 1962] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.350337] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x4 0x1 0x0 0x8 0x0 0x0] |
| [ 2.350366] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.350380] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.350391] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.350404] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.350414] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.350427] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.350442] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.350455] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.350467] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.350477] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.350489] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.350499] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.350519] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.350530] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.350541] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.350553] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_give_sink_cap |
| [ 2.354756] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.354772] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc8 |
| [ 2.354783] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:0 |
| [ 2.354797] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.354809] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.354823] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc8 sub3:ffff |
| [ 2.354840] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc8, 0xffff) |
| [ 2.354855] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.354869] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.354881] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.354894] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.354905] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.354928] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.354940] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.354953] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.354968] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.359536] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.361085] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x2 0x8 0x1 0x0 0xc 0x80 0x0] |
| [ 2.361120] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.361133] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.361144] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:0 |
| [ 2.361158] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.361168] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.361180] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.361198] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.361212] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.361226] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.361237] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.361253] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.361264] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.361288] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.361299] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.361313] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.361327] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.377737] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt1(0x00) |
| [ 2.378389] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: charger interrupt2(0x00) |
| [ 2.379038] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: AFC interrupt(0x00) |
| [ 2.379684] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: 0x48 (0x00) |
| [ 2.381104] [0:irq/131-s2mu004: 1241] s2mu004_irq_thread: muic interrupt(0x01, 0x00) |
| [ 2.381119] [0:irq/131-s2mu004: 1241] [MUIC] muic-attach S2MU004_SECOND_ATTACH start |
| [ 2.381767] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_get_vbus_state vbus : (1) |
| [ 2.382413] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_check_irq_exeptions adc 0x1f, vbvolt : 1, irq_num : 23 |
| [ 2.382425] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_irq_thread attach_mode : 2, irq_num: 23 |
| [ 2.395428] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.397197] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x0 0x21 0x0 0x8 0xc0 0x0] |
| [ 2.397235] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.397250] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.397262] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:0 |
| [ 2.397280] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.397295] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.397311] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.397330] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.397346] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.397361] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.397373] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 3000, power : 15000000 |
| [ 2.397388] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.397403] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.397429] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.397440] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.397454] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.397469] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_evaluate_capability |
| [ 2.399403] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: [Rx] [0x1161] [0x26019096] |
| [ 2.399418] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: [1] FIXED volt(5000)mV, max current(1500) |
| [ 2.399431] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_select_capability |
| [ 2.402682] [1: kworker/1:2: 2019] usbpd_wait_msg, 505 |
| [ 2.404659] [0:irq/131-s2mu004: 1241] [MUIC] dev[1:0x04, 2:0x00, 3:0x00] |
| [ 2.404674] [0:irq/131-s2mu004: 1241] [MUIC] adc:0x1f, vbvolt:0x01, apple:0x06 |
| [ 2.404685] [0:irq/131-s2mu004: 1241] [MUIC] chg_type:0x04, vmid:0x01, dev_id:0x38 |
| [ 2.404696] [0:irq/131-s2mu004: 1241] [MUIC] USB DETECTED |
| [ 2.404709] [0:irq/131-s2mu004: 1241] [MUIC] muic_manager_set_legacy_dev: 0->1 |
| [ 2.404721] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_handle_attach attached_dev: 0, new_dev: 1 |
| [ 2.404733] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_handle_attached_prev_dev attached_dev: 0, new_dev: 1 |
| [ 2.404745] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_detach_attached_dev: (0) |
| [ 2.404757] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_handle_attached_new_dev : muic_pdata->attached_dev: 0, new_dev: 1 |
| [ 2.404772] [0:irq/131-s2mu004: 1241] [MUIC] MUIC_CORE:muic_core_attach_usb |
| [ 2.404784] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_attach_usb |
| [ 2.404796] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_switch_to_usb |
| [ 2.405436] [0:irq/131-s2mu004: 1241] [MUIC] s2mu004_muic_set_com_sw 0x24 != 0x0, update |
| [ 2.406535] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_attach_charger : 1 |
| [ 2.406546] [0:irq/131-s2mu004: 1241] [MUIC] MUIC_CORE:muic_core_handle_attached_new_dev done |
| [ 2.406560] [0:irq/131-s2mu004: 1241] [MUIC_HV] muic_check_is_hv_dev attached_dev(1)[F] |
| [ 2.406571] [0:irq/131-s2mu004: 1241] [MUIC] muic_core_handle_attach new_dev failed |
| [ 2.406582] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_attach_attached_dev: (1) |
| [ 2.406593] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_notify: CMD=1, DATA=1 |
| [ 2.406605] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_muic_notification: attach:1, cable_type:1 |
| [ 2.406619] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_muic_notification: USB(1) Attached, CCIC: Attached |
| [ 2.406632] [0:irq/131-s2mu004: 1241] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:01 sub2:00 sub3:01 |
| [ 2.406654] [0:irq/131-s2mu004: 1241] sec-battery battery: usb_typec_handle_notification: action (1) dump(0x4, 0x2, 0x01, 0x0001, 0x0000, 0x0001) |
| [ 2.406667] [0:irq/131-s2mu004: 1241] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.406679] [0:irq/131-s2mu004: 1241] [MUIC] muic_handle_dock_notification: ignore(1) |
| [ 2.406689] [0:irq/131-s2mu004: 1241] [MUIC] muic_notifier_notify: notify done(0x0) |
| [ 2.406700] [0:irq/131-s2mu004: 1241] [MUIC] update_jig_state jig_state : 0 |
| [ 2.406711] [0:irq/131-s2mu004: 1241] [MUIC] muic_jig_uart_cb: MUIC uart type(0) |
| [ 2.406722] [0:irq/131-s2mu004: 1241] vbus_notifier_handle: (1)->(2) |
| [ 2.406733] [0:irq/131-s2mu004: 1241] vbus_notifier_notify: CMD=2, DATA=2 |
| [ 2.406745] [0:irq/131-s2mu004: 1241] usb: [M] manager_handle_vbus_notification: cmd=2, vbus_type=HIGH, WATER DET=0 ATTACH=ATTACH (0) |
| [ 2.406757] [0:irq/131-s2mu004: 1241] usb_notifier: vbus_handle_notification cmd=2, vbus_type=HIGH |
| [ 2.406768] [0:irq/131-s2mu004: 1241] usb_notify: send_otg_notify event=vbus_power(25) enable=1 |
| [ 2.406780] [0:irq/131-s2mu004: 1241] usb_notify: extra_notifier_callback event=vbus_power(25) |
| [ 2.406792] [0:irq/131-s2mu004: 1241] usb_notify: extra_notify_state+ event=vbus_power(25), enable=on |
| [ 2.406805] [0:irq/131-s2mu004: 1241] usb_notify: extra_notify_state- event=vbus_power(25), cable=none |
| [ 2.406820] [0:irq/131-s2mu004: 1241] abov-touchkey-3x6 10-0020: [sec_input] abov_touchkey_vbus_notification cmd=2, vbus_type=2 |
| [ 2.406834] [0:irq/131-s2mu004: 1241] abov-touchkey-3x6 10-0020: [sec_input] abov_touchkey_vbus_notification : attach |
| [ 2.406848] [0:irq/131-s2mu004: 1241] abov-touchkey-3x6 10-0020: [sec_input] abov_set_ta_status ta_connected 1 |
| [ 2.407299] [0:irq/131-s2mu004: 1241] vbus_handle_notification: action=2, vbus_status=2 |
| [ 2.407310] [0:irq/131-s2mu004: 1241] vbus_notifier_notify: notify done(0x0) |
| [ 2.407322] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.407330] [0:irq/131-s2mu004: 1241] [MUIC] ATTACHED_DEV_USB_MUIC S2MU004_SECOND_ATTACH done |
| [ 2.408863] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x3 0x0 0x1 0x0 0xc 0x80 0x0] |
| [ 2.408897] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_transition_sink |
| [ 2.408910] [1: kworker/1:2: 2019] usbpd_wait_msg, 505 |
| [ 2.430882] [6: kworker/u16:0: 6] s2mu004_fg_set_property: WA for power off issue: val(1) |
| [ 2.432631] [6: kworker/u16:0: 6] sec_bat_get_charging_current_by_siop: incurr(3000), chgcurr(2150) |
| [ 2.432640] [6: kworker/u16:0: 6] s2mu004_set_input_current_limit: Invalid current limit in register, set setting to maximum |
| [ 2.433754] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_input_current_limit: current 3000, 0x62 |
| [ 2.436553] [7: init: 1] init: SELinux: Could not set context for /sys/kernel/config: Operation not supported on transport endpoint |
| [ 2.442445] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.443987] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x10 0x1 0x0 0x8 0x80 0x0] |
| [ 2.444021] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.444049] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: got PS_READY. |
| [ 2.444061] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.444077] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc0 |
| [ 2.444088] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:4, num:1, sel:1 |
| [ 2.444104] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.444120] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc0 sub3:ffff |
| [ 2.444140] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc0, 0xffff) |
| [ 2.444157] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.444172] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 1500, power : 7500000 |
| [ 2.444187] [1: kworker/1:2: 2019] make_pd_list: total pd_list_index: 1 |
| [ 2.444199] [1: kworker/1:2: 2019] make_pd_list: Made pd_list[0], voltage : 5000, current : 1500, index : 1 |
| [ 2.444213] [1: kworker/1:2: 2019] sec-battery battery: make_pd_list: battery->pdic_ps_rdy(1) |
| [ 2.444228] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.444242] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.444268] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.444280] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.444293] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.444306] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.444321] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.444333] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.444343] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.444358] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.444369] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.444381] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.444398] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.444412] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.444425] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.444438] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 1500, power : 7500000 |
| [ 2.444448] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.444460] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.444480] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.444491] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.444502] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.444515] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.445550] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x0 0x8 0x1 0x0 0x8 0x0 0x0] |
| [ 2.445583] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.445596] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.445607] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.445620] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.445630] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.445643] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.445659] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.445672] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.445687] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.445700] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 1500, power : 7500000 |
| [ 2.445714] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.445725] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.445746] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.445757] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.445769] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.445784] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.451701] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x62, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x62, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x11, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.451715] [6: kworker/u16:0: 6] [DEBUG] s2mu004_chg_set_property: is_charging 1 |
| [ 2.452842] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_fast_charging_current: current 2150, 0x55 |
| [ 2.454541] [7: init: 1] init: waitpid failed: No child processes |
| [ 2.454843] [7: init: 1] init: (Loading properties from /default.prop took 0.00s.) |
| [ 2.455435] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.456538] [7: init: 1] init: /init.rc: 989: invalid keyword 'chgrp' |
| [ 2.457172] [7: init: 1] init: /init.rc: 1659: restorecon_data_force requires 0 arguments |
| [ 2.457382] [7: init: 1] init: /init.environ.rc: 13: export requires 2 arguments |
| [ 2.457405] [7: init: 1] init: (Parsing /init.environ.rc took 0.00s.) |
| [ 2.457605] [7: init: 1] init: (Parsing /init.usb.rc took 0.00s.) |
| [ 2.458645] [7: init: 1] init: ignored duplicate definition of service 'lpm'init: (Parsing init.samsungexynos7885.usb.rc took 0.00s.) |
| [ 2.459575] [7: init: 1] init: (Parsing init.baseband.rc took 0.00s.) |
| [ 2.459669] [7: init: 1] init: (Parsing init.carrier.rc took 0.00s.) |
| [ 2.459828] [7: init: 1] init: (Parsing init.wifi.rc took 0.00s.) |
| [ 2.459839] [7: init: 1] init: (Parsing /init.samsungexynos7885.rc took 0.00s.) |
| [ 2.460046] [7: init: 1] init: (Parsing /init.usb.configfs.rc took 0.00s.) |
| [ 2.460139] [7: init: 1] init: (Parsing /init.zygote64_32.rc took 0.00s.) |
| [ 2.460168] [7: init: 1] init: could not import file '/init.rilcommon.rc' from '/init.rc': No such file or directory |
| [ 2.460304] [7: init: 1] init: (Parsing /init.container.rc took 0.00s.) |
| [ 2.460329] [7: init: 1] init: could not import file '/init.fac.rc' from '/init.rc': No such file or directory |
| [ 2.460339] [7: init: 1] init: (Parsing /init.rc took 0.00s.) |
| [ 2.460696] [7: init: 1] init: Starting service 'ueventd'... |
| [ 2.461455] [7: init: 1] init: Waiting for /dev/.coldboot_done... |
| [ 2.464500] [7: ueventd: 2020] ueventd: ueventd started! |
| [ 2.465173] [7: ueventd: 2020] ueventd: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:ueventd:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.467545] [7: ueventd: 2020] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts.bin. |
| [ 2.469740] [7: ueventd: 2020] ueventd: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:ueventd:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 2.471819] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0xa3, 0x0b:0x00, 0x0c:0x03, 0x0d:0x0b, 0x0e:0x62, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x62, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x55, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.472121] [7: ueventd: 2020] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts.bin. |
| [ 2.483319] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_irq_thread |
| [ 2.484876] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: s2mu004_poll_status status[0x80 0x0 0x1 0x0 0x8 0x80 0x0] |
| [ 2.486803] [1:irq/211-s2mu004: 1980] usbpd-s2mu004 5-003c: [Rx] [0x196f] [0xff008001] |
| [ 2.486836] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.486850] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0 |
| [ 2.486861] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.486876] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.486887] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.486899] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00 |
| [ 2.486917] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0x0000, 0x0000) |
| [ 2.486935] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.486947] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.486958] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 1500, power : 7500000 |
| [ 2.486971] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.486983] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.487006] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.487021] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.487032] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.487045] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_ufp_vdm_get_identity_nak |
| [ 2.489672] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0xa3, 0x0b:0x00, 0x0c:0x03, 0x0d:0x0b, 0x0e:0x62, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x62, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x55, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.489685] [6: kworker/u16:0: 6] sec_bat_set_charging_current: power(15000), input(3000), charge(2150) |
| [ 2.489695] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes |
| [ 2.489701] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Polling time is reset to 30 sec. |
| [ 2.489716] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: End |
| [ 2.489723] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Start |
| [ 2.489729] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4) |
| [ 2.489734] [6: kworker/u16:0: 6] sec_bat_get_input_current_in_power_list:max_input_current : 1500mA |
| [ 2.489739] [6: kworker/u16:0: 6] sec_bat_get_charging_current_in_power_list:pd_charge_power : 7500000mW, max_charging_current : 1724mA |
| [ 2.489745] [6: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4) |
| [ 2.489752] [6: kworker/u16:0: 6] sec_bat_get_charging_current_by_siop: incurr(1500), chgcurr(1724) |
| [ 2.490334] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_snk_ready |
| [ 2.490349] [1: kworker/1:2: 2019] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:ffff rprd:ffc8 |
| [ 2.490361] [1: kworker/1:2: 2019] ccic_notifier_notify: PD event:2, num:1, sel:1 |
| [ 2.490374] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1 |
| [ 2.490384] [1: kworker/1:2: 2019] usb: [M] manager_handle_ccic_notification: PD charger + UFP |
| [ 2.490396] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:ffc8 sub3:ffff |
| [ 2.490414] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: action (4) dump(0x5, 0x2, 0x04, 0x0001, 0xffc8, 0xffff) |
| [ 2.490429] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: battery->pdic_ps_rdy(1) |
| [ 2.490442] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1 |
| [ 2.490455] [1: kworker/1:2: 2019] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 1500, power : 7500000 |
| [ 2.490468] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) |
| [ 2.490481] [1: kworker/1:2: 2019] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4) |
| [ 2.490500] [1: kworker/1:2: 2019] sec-battery battery: usb_typec_handle_notification: CMD[PD_ATTACH], CABLE_TYPE[19] |
| [ 2.490515] [1: kworker/1:2: 2019] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 2.490527] [1: kworker/1:2: 2019] ccic_notifier_notify: notify done(0x0) |
| [ 2.490545] [1: kworker/1:2: 2019] usbpd-s2mu004 5-003c: usbpd_policy_work Finished |
| [ 2.490870] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_input_current_limit: current 1500, 0x3a |
| [ 2.508719] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0xa3, 0x0b:0x00, 0x0c:0x03, 0x0d:0x0b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x55, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.508734] [6: kworker/u16:0: 6] [DEBUG] s2mu004_chg_set_property: is_charging 1 |
| [ 2.509851] [6: kworker/u16:0: 6] [DEBUG]s2mu004_set_fast_charging_current: current 1724, 0x43 |
| [ 2.531169] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x43, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.549630] [6: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x43, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.549643] [6: kworker/u16:0: 6] sec_bat_set_charging_current: power(7500), input(1500), charge(1724) |
| [ 2.549654] [6: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: End |
| [ 2.550970] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 2.551637] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 2.558516] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3874) |
| [ 2.559809] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 52) |
| [ 2.559820] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-21)mA |
| [ 2.562062] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 2fa), avg current (-187)mA |
| [ 2.562072] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 2.563366] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 2.564026] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 2.567670] [5: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_temperature: temperature (288) |
| [ 2.569611] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 2.572158] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36) |
| [ 2.585574] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (221) data1 (8) |
| [ 2.585585] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5539) |
| [ 2.585592] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0) |
| [ 2.587841] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0x 2fa), avg current (-187)mA |
| [ 2.587852] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 2.640711] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3867) |
| [ 2.640731] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56 |
| [ 2.647167] [6: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3874) |
| [ 2.648665] [7: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 2.649334] [7: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 2.650638] [7: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0x 52) |
| [ 2.650649] [7: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (-21)mA |
| [ 2.650656] [7: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 2.672327] [7: kworker/u16:0: 6] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xf8, 0x05:0x7b, 0x06:0x52, 0x07:0x00, 0x08:0x3a, 0x09:0x24, 0x0a:0xe6, 0x0b:0x1c, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 2.672343] [7: kworker/u16:0: 6] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 2.672355] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_get_battery_info:Vnow(3874mV),Inow(-21mA),Imax(1500mA),Ichg(1724mA),SOC(56%),Tbat(260), Tusb(0), Tchg(288),Twpc(0) |
| [ 2.674293] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cisd_check: [CISD] iavg: -187, incur: 1500, chgcur: 1700, |
| [ 2.674293] [7: kworker/u16:0: 6] cc_T: 0, lcd_off_T: 0, passed_T: 0, full_T: 0, chg_end_T: 0, cisd: 0x0 |
| [ 2.678011] [7: kworker/u16:0: 6] [DEBUG] s2mu004_get_charging_health: S2MU004_CHG_STATUS0 0x63 |
| [ 2.695976] [7: kworker/u16:0: 6] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x43, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 2.695995] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_temperature: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50) |
| [ 2.696002] [7: kworker/u16:0: 6] sec_bat_swelling_check: swelling highblock(410), highrecov(390) |
| [ 2.696668] [7: kworker/u16:0: 6] sec_bat_swelling_check: status(1), swell_mode(0:0:0), cv(4350)mV, temp(260) |
| [ 2.696683] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_fullcharged_check: Charging Mode : Normal |
| [ 2.696689] [7: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x0) |
| [ 2.696696] [7: kworker/u16:0: 6] sec_bat_calculate_safety_time : EXPIRED_TIME(10380000), IP(7500000), CP(7499400), CURR(1724), STANDARD(2150) |
| [ 2.696702] [7: kworker/u16:0: 6] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(12944895) TIME NOW(2) TIME PREV(1) |
| [ 2.696708] [7: kworker/u16:0: 6] sec_bat_calculate_safety_time : REMAIN_TIME(10379197) CAL_REMAIN_TIME(12943895) |
| [ 2.696714] [7: kworker/u16:0: 6] sec_bat_check_mix_temp: mix_limit(0), temp(260), chg_temp(288), input_current(1500) |
| [ 2.696720] [7: kworker/u16:0: 6] sec_bat_chg_temperature_check: cable_type(19), chg_limit(0) |
| [ 2.696725] [7: kworker/u16:0: 6] sec_bat_check_pdic_temp: pd_index(0), input_current(1500), chg_limit(0) |
| [ 2.696730] [7: kworker/u16:0: 6] sec_bat_get_charging_current_by_siop: incurr(1500), chgcurr(1724) |
| [ 2.696739] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0) |
| [ 2.696747] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(PDIC, PDIC, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(PDIC), sleep_mode(0), Cycle(-1) |
| [ 2.696759] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_set_polling: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes |
| [ 2.696765] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_set_polling: Polling time 10/30 sec. |
| [ 2.696775] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: Start |
| [ 2.696781] [7: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x0), after(0x4) |
| [ 2.696786] [7: kworker/u16:0: 6] sec_bat_get_input_current_in_power_list:max_input_current : 1500mA |
| [ 2.696791] [7: kworker/u16:0: 6] sec_bat_get_charging_current_in_power_list:pd_charge_power : 7500000mW, max_charging_current : 1724mA |
| [ 2.696797] [7: kworker/u16:0: 6] sec_bat_set_current_event: current event before(0x4), after(0x4) |
| [ 2.696802] [7: kworker/u16:0: 6] sec_bat_get_charging_current_by_siop: incurr(1500), chgcurr(1724) |
| [ 2.696807] [7: kworker/u16:0: 6] sec-battery battery: sec_bat_cable_work: End |
| [ 2.697515] [7: kworker/7:3: 1772] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 2.762135] [7: ueventd: 2020] dual_role_get_local_prop : request prop = 1 , attached_state = 2, power_role_dual = 1 |
| [ 2.762148] [7: ueventd: 2020] dual_role_get_local_prop : request prop = 2 , attached_state = 2, power_role_dual = 1 |
| [ 2.762156] [7: ueventd: 2020] dual_role_get_local_prop : request prop = 3 , attached_state = 2, power_role_dual = 1 |
| [ 2.762167] [7: ueventd: 2020] dual_role_get_local_prop : request prop = 4 , attached_state = 2, power_role_dual = 1 |
| [ 2.855186] [7: ueventd: 2020] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 3.032216] [7: ueventd: 2020] ueventd: Coldboot took 0.56s. |
| [ 3.039676] [6: init: 1] init: Waiting for /dev/.coldboot_done took 0.58s. |
| [ 3.058965] [6: init: 1] LIBFFU: FFU Target : SEC eMMC |
| [ 3.058982] [6: init: 1] LIBFFU: Don't need FFU |
| [ 3.064926] [6: init: 1] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory |
| [ 3.068258] [6: init: 1] init: write_file: Unable to open '/dev/cpuset/top-app/family_boost': Permission denied |
| [ 3.073537] [6: init: 1] Registered swp emulation handler |
| [ 3.074429] [6: init: 1] init: Starting service 'watchdogd'... |
| [ 3.076689] [6: init: 1] [mtp_setup] line = [1846] |
| [ 3.079195] [7: watchdogd: 2734] watchdogd: started (interval 10, margin 20)! |
| [ 3.081721] [6: init: 1] mtp: mtp_setup success to create guid attr |
| [ 3.083786] [6: init: 1] using random self ethernet address |
| [ 3.083798] [6: init: 1] using random host ethernet address |
| [ 3.084037] [6: init: 1] conn_gadget_setup |
| [ 3.085814] [6: init: 1] using random self ethernet address |
| [ 3.085828] [6: init: 1] using random host ethernet address |
| [ 3.107048] [7: init: 2746] fs_mgr: debug: ro.security_mode is 1526595585 |
| [ 3.107063] [7: init: 2746] fs_mgr: KAP is enabled |
| [ 3.110665] [3: init: 2746] fs_mgr: Verify signature ... |
| [ 3.115169] [7: init: 2746] fs_mgr: Blob verification success : 0 |
| [ 3.115209] [7: init: 2746] fs_mgr: Enabling dm-verity for system (mode 0) |
| [ 3.115226] [6: init: 2746] fs_mgr: loading verity table: '1 /dev/block/platform/13500000.dwmmc0/by-name/SYSTEM /dev/block/platform/13500000.dwmmc0/by-name/SYSTEM 4096 4096 1007606 1007614 sha256 E60CE90891E4DB0920D5C9094CD5480210B3BAD0320BC39F1770C7BAE7198DB9 77D9E795C5C7986E8742C3C6577B7BD1B0DD64C744D33C56C88F9C9403551FAF 1 ignore_zero_blocks'fs_mgr: load_verity_table succeeded |
| [ 3.118129] [7: kworker/u16:0: 6] device-mapper: verity: 259:11: block 0 is superblock. Skipping verity_handle_err |
| [ 3.122602] [6: init: 2746] EXT4-fs (dm-0): mounting with "discard" option, but the device does not support discard |
| [ 3.122615] [6: init: 2746] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=panic |
| [ 3.122757] [6: init: 2746] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0 |
| [ 3.122816] [6: init: 2746] fs_mgr: __mount return 0(source=dm-0,target=/system,type=ext4,flags=1,options=errors=panic) |
| [ 3.122816] [6: init: 2746] |
| [ 3.126033] [6: init: 2746] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/13500000.dwmmc0/by-name/CACHE |
| [ 3.148126] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_active_interface: switched to interface#: 0 |
| [ 3.148140] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move BOOTING -> BOOTING (00 -> 00) |
| [ 3.148147] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved BOOTING -> BOOTING (00 -> 00) |
| [ 3.148153] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_switch_to_va_firmware: switching to VA firmware |
| [ 3.148159] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_va_firmware_ready |
| [ 3.148165] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_active_interface: switched to interface#: 0 |
| [ 3.148297] [6:dbmdx probe thr: 1902] dbmd_4_6-spi spi2.0: spi_set_speed Update SPI Max Speed to 4800000 Hz, bpw: 8, mode: 0 |
| [ 3.148337] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_reset_set: 0==>gpio120 |
| [ 3.158482] [6:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_reset_release: 1==>gpio120 |
| [ 3.182321] [7: init: 2746] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 3.182321] [7: init: 2746] |
| [ 3.182359] [7: init: 2746] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear. |
| [ 3.182359] [7: init: 2746] |
| [ 3.182373] [7: init: 2746] e2fsck: check whether gdt & bitmap free count is vaild |
| [ 3.182373] [7: init: 2746] |
| [ 3.182388] [7: init: 2746] e2fsck: /dev/block/platform/13500000.dwmmc0/by-name/CACHE: clean, 29/16000 files, 2757/64000 blocks |
| [ 3.182388] [7: init: 2746] |
| [ 3.182401] [7: init: 2746] e2fsck: ext2fs_close2 : normal operation, return 0 |
| [ 3.182401] [7: init: 2746] |
| [ 3.183932] [6: init: 2746] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic |
| [ 3.184038] [6: init: 2746] fs_mgr: __mount(source=/dev/block/platform/13500000.dwmmc0/by-name/CACHE,target=/cache,type=ext4)=0 |
| [ 3.184097] [6: init: 2746] fs_mgr: __mount return 0(source=CACHE,target=/cache,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic) |
| [ 3.184097] [6: init: 2746] |
| [ 3.184541] [6: init: 2746] fs_mgr: check skipping fsck status : 1 |
| [ 3.184863] [6: init: 2746] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/platform/13500000.dwmmc0/by-name/USERDATA for mount /data type ext4 ) |
| [ 3.185014] [6: init: 2746] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/13500000.dwmmc0/by-name/EFS |
| [ 3.197251] [6: init: 2746] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 3.197251] [6: init: 2746] |
| [ 3.197281] [6: init: 2746] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear. |
| [ 3.197281] [6: init: 2746] |
| [ 3.197296] [6: init: 2746] e2fsck: check whether gdt & bitmap free count is vaild |
| [ 3.197296] [6: init: 2746] |
| [ 3.197310] [6: init: 2746] e2fsck: /dev/block/platform/13500000.dwmmc0/by-name/EFS: clean, 109/1280 files, 1722/5120 blocks (check after next mount) |
| [ 3.197310] [6: init: 2746] |
| [ 3.197323] [6: init: 2746] e2fsck: ext2fs_close2 : normal operation, return 0 |
| [ 3.197323] [6: init: 2746] |
| [ 3.204557] [6: init: 2746] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic |
| [ 3.204639] [6: init: 2746] fs_mgr: __mount(source=/dev/block/platform/13500000.dwmmc0/by-name/EFS,target=/efs,type=ext4)=0 |
| [ 3.204697] [6: init: 2746] fs_mgr: __mount return 0(source=EFS,target=/efs,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic) |
| [ 3.204697] [6: init: 2746] |
| [ 3.204858] [6: init: 2746] init: SELinux: error labeling device: /dev/block/dm-0 u:object_r:system_block_device:s0 |
| [ 3.206788] [7: init: 1] init: (Parsing /system/etc/init/atrace.rc took 0.00s.) |
| [ 3.207204] [0: init: 1] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.) |
| [ 3.207674] [7: init: 1] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.) |
| [ 3.208067] [0: init: 1] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.) |
| [ 3.208469] [7: init: 1] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.) |
| [ 3.208809] [5: init: 1] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.) |
| [ 3.209267] [5: init: 1] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.) |
| [ 3.209582] [7: init: 1] init: ignored duplicate definition of service 'drm'init: (Parsing /system/etc/init/drmserver.rc took 0.00s.) |
| [ 3.210151] [0: init: 1] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.) |
| [ 3.210490] [7: init: 1] init: (Parsing /system/etc/init/freecess.rc took 0.00s.) |
| [ 3.210767] [0: init: 1] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.) |
| [ 3.211183] [7: init: 1] init: (Parsing /init.rilcarrier.rc took 0.00s.) |
| [ 3.211294] [7: init: 1] init: (Parsing /init.rilchip.rc took 0.00s.) |
| [ 3.211337] [7: init: 1] init: (Parsing /init.rilepdg.rc took 0.00s.) |
| [ 3.211379] [7: init: 1] init: ignored duplicate definition of service 'redsocks'init: (Parsing /init.rilmptcp.rc took 0.00s.) |
| [ 3.211404] [7: init: 1] init: (Parsing /system/etc/init/init.rilcommon.rc took 0.00s.) |
| [ 3.211744] [0: init: 1] init: (Parsing /system/etc/init/installd.rc took 0.00s.) |
| [ 3.212147] [7: init: 1] init: (Parsing /system/etc/init/keystore.rc took 0.00s.) |
| [ 3.212480] [5: init: 1] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.) |
| [ 3.213355] [5: init: 1] init: (Parsing /system/etc/init/logd.rc took 0.00s.) |
| [ 3.213777] [5: init: 1] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.) |
| [ 3.214140] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: SRAM firmware loaded at ffffff8010411000 (27984) |
| [ 3.214276] [1: init: 1] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.) |
| [ 3.214697] [6: init: 1] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.) |
| [ 3.215757] [5: init: 1] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.) |
| [ 3.216253] [0: init: 1] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.) |
| [ 3.217177] [0: init: 1] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.) |
| [ 3.218131] [0: init: 1] init: (Parsing /system/etc/init/netd.rc took 0.00s.) |
| [ 3.219093] [0: init: 1] init: (Parsing /system/etc/init/powersnd.rc took 0.00s.) |
| [ 3.219927] [6: kworker/6:0: 40] tfa98xx 8-0034: disable partial update |
| [ 3.219958] [6: kworker/6:0: 40] tfa98xx 8-0034: Registered DSP instance with handle 0 |
| [ 3.220331] [0: init: 1] init: (Parsing /system/etc/init/racoon.rc took 0.00s.) |
| [ 3.220776] [6: kworker/6:0: 40] tfa_set_query_info: device type (0x3b72) |
| [ 3.221268] [0: init: 1] init: (Parsing /system/etc/init/remotedisplay.rc took 0.00s.) |
| [ 3.221569] [6: kworker/6:0: 40] tfa98xx_container_loaded(): [0x34] calibrate_done = MTPEX (1) 0x0003 |
| [ 3.221576] [6: kworker/6:0: 40] tfa98xx_container_loaded(): Allocate buffer_pool |
| [ 3.221587] [6: kworker/6:0: 40] tfa_buffer_pool: dev 0 - buffer_pool[0] - kmalloc allocated 65536 bytes |
| [ 3.221593] [6: kworker/6:0: 40] tfa_buffer_pool: dev 0 - buffer_pool[1] - kmalloc allocated 65536 bytes |
| [ 3.221600] [6: kworker/6:0: 40] tfa_buffer_pool: dev 0 - buffer_pool[2] - kmalloc allocated 65536 bytes |
| [ 3.221605] [6: kworker/6:0: 40] tfa_buffer_pool: dev 0 - buffer_pool[3] - kmalloc allocated 65536 bytes |
| [ 3.221611] [6: kworker/6:0: 40] tfa_buffer_pool: dev 0 - buffer_pool[4] - kmalloc allocated 65536 bytes |
| [ 3.221620] [6: kworker/6:0: 40] tfa_buffer_pool: dev 0 - buffer_pool[5] - kmalloc allocated 8192 bytes |
| [ 3.222249] [0: init: 1] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.) |
| [ 3.222708] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: DRAM firmware loaded at ffffff8010539000 (1972816) |
| [ 3.222834] [0: init: 1] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.) |
| [ 3.223544] [6: init: 1] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.) |
| [ 3.224521] [0: init: 1] init: (Parsing /system/etc/init/vdc.rc took 0.00s.) |
| [ 3.225320] [1: init: 1] init: (Parsing /system/etc/init/visiondserver.rc took 0.00s.) |
| [ 3.225534] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_enable |
| [ 3.225549] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_request_cpu_gear(00000000ab0cdefa, 3) |
| [ 3.225576] [7: kworker/7:3: 1772] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 3.225588] [7: kworker/7:1: 81] abox_cpu_enable(0) |
| [ 3.225596] [7: kworker/7:1: 81] abox_cpu_power(0) |
| [ 3.225660] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: audif clock: 24576000 |
| [ 3.225670] [7: kworker/7:1: 81] samsung-abox-gic 14af1000.abox_gic: abox_gic_init_gic |
| [ 3.225685] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_cfg_gpio(default) |
| [ 3.225692] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_download_firmware |
| [ 3.225849] [1: init: 1] init: (Parsing /system/etc/init/vold.rc took 0.00s.) |
| [ 3.226899] [1: init: 1] init: (Parsing /vendor/etc/init/secure_storage_daemon.rc took 0.00s.) |
| [ 3.227724] [6: init: 1] init: SELinux: Skipping restorecon_recursive(/efs) |
| [ 3.228157] [6: init: 1] init: Running /system/bin/e2fsck on /dev/block/platform/13500000.dwmmc0/by-name/CPEFS |
| [ 3.228918] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_download_extra_firmware: tfadsp.bin is downloaded at area 1 offset 5251072 |
| [ 3.228947] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_download_extra_firmware: AP_AUDIO_SLSI.bin is downloaded at area 1 offset 8323072 |
| [ 3.228957] [7: kworker/7:1: 81] samsung-abox 14a50000.abox: abox_download_extra_firmware: APBargeIn_AUDIO_SLSI.bin is downloaded at area 1 offset 8306688 |
| [ 3.228967] [7: kworker/7:1: 81] abox_cpu_power(1) |
| [ 3.228977] [7: kworker/7:1: 81] abox_cpu_enable(1) |
| [ 3.238418] [7: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 3.238418] [7: init: 1] |
| [ 3.238446] [7: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear. |
| [ 3.238446] [7: init: 1] |
| [ 3.238459] [7: init: 1] e2fsck: check whether gdt & bitmap free count is vaild |
| [ 3.238459] [7: init: 1] |
| [ 3.238470] [7: init: 1] e2fsck: /dev/block/platform/13500000.dwmmc0/by-name/CPEFS: clean, 13/512 files, 1197/2048 blocks |
| [ 3.238470] [7: init: 1] |
| [ 3.238483] [7: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0 |
| [ 3.238483] [7: init: 1] |
| [ 3.239899] [7: init: 1] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic |
| [ 3.241895] [7: init: 1] init: write_file: Unable to open '/proc/ecd/load_firmware': No such file or directory |
| [ 3.242856] [7: init: 1] init: Running /system/bin/e2fsck on /dev/block/platform/13500000.dwmmc0/by-name/OMR |
| [ 3.247651] [5:dbmdx probe thr: 1902] dbmd_4_6-spi spi2.0: spi_set_speed Update SPI Max Speed to 960000 Hz, bpw: 8, mode: 0 |
| [ 3.247773] [5:dbmdx probe thr: 1902] [CAL]cal_vclk_set_rate failed 184549391 1920000 -22. |
| [ 3.253009] [5: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 3.253009] [5: init: 1] |
| [ 3.253058] [5: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear. |
| [ 3.253058] [5: init: 1] |
| [ 3.253082] [5: init: 1] e2fsck: check whether gdt & bitmap free count is vaild |
| [ 3.253082] [5: init: 1] |
| [ 3.253106] [5: init: 1] e2fsck: /dev/block/platform/13500000.dwmmc0/by-name/OMR: clean, 11/3200 files, 1230/12800 blocks |
| [ 3.253106] [5: init: 1] |
| [ 3.253129] [5: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0 |
| [ 3.253129] [5: init: 1] |
| [ 3.256235] [6: init: 1] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic |
| [ 3.258989] [6: init: 1] init: Starting service 'sec-sh'... |
| [ 3.259756] [6: init: 1] init: Starting service 'logd'... |
| [ 3.276532] I[0: swapper/0: 0] samsung-abox 14a50000.abox: Calliope is ready to sing (version:lQK3) |
| [ 3.276572] I[0: swapper/0: 0] samsung-abox 14a50000.abox: abox_request_cpu_gear(000000000000b00d, 3) |
| [ 3.276737] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_cpu_pm_ipc |
| [ 3.276863] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_restore_data |
| [ 3.277711] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_request_cpu_gear(00000000ab0cdefa, 12) |
| [ 3.277748] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 3.284608] [6: init: 1] init: Service 'sec-sh' (pid 2777) exited with status 127 |
| [ 3.285461] [6: init: 1] init: SELinux: Skipping restorecon_recursive(/cache) |
| [ 3.287754] [6: init: 1] init: Starting service 'scs'... |
| [ 3.289830] [6: init: 1] init: (Loading properties from /efs/factory.prop took 0.00s.) |
| [ 3.289920] [6: init: 1] init: property_set("ro.multisim.simslotcount", "2") failed |
| [ 3.289954] [6: init: 1] init: property_set("ro.sf.lcd_density", "480") failed |
| [ 3.290347] [6: init: 1] init: (Loading properties from /system/build.prop took 0.00s.) |
| [ 3.295942] [7: init: 1] init: property_set("ro.telephony.default_network", "9") failed |
| [ 3.295986] [7: init: 1] init: (Loading properties from /system/vendor/carrier/EUR/build.prop took 0.00s.) |
| [ 3.296059] [7: init: 1] init: (Loading properties from /vendor/build.prop took 0.00s.) |
| [ 3.296084] [7: init: 1] init: (Loading properties from /factory/factory.prop took 0.00s.) |
| [ 3.296195] [7: init: 1] init: /recovery not specified in fstab |
| [ 3.296375] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 3.296852] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 3.299364] [7: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin. |
| [ 3.299489] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 3.300370] [7: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 3.303397] [7: init: 1] init: Starting service 'debuggerd'... |
| [ 3.304066] [7: init: 1] init: Starting service 'debuggerd64'... |
| [ 3.305177] [7: init: 1] init: Starting service 'mobicore'... |
| [ 3.305810] [7: init: 1] init: Starting service 'icd'... |
| [ 3.306602] [7: init: 1] init: Starting service 'vold'... |
| [ 3.307749] [7: init: 1] init: Not bootcharting. |
| [ 3.309686] [6: init: 2788] init: couldn't write 2788 to /dev/cpuset/vold/tasks: No such file or directory |
| [ 3.322667] [4: kworker/4:1: 1964] Trustonic TEE: mtk|*** Trustonic TEE MTK, Build: Jul 26 2017, 16:12:25 *** |
| [ 3.322689] [4: kworker/4:1: 1964] Trustonic TEE: mtk|MTK: t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 3.323116] [7: init: 1] init: Starting service 'auditd'... |
| [ 3.323481] [5: mcDriverDaemon: 2786] Trustonic TEE: mobicore_start: |
| [ 3.323481] [5: mcDriverDaemon: 2786] product_id = t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_mci = 0x00010006 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_so = 0x00020002 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_mclf = 0x00020005 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_container = 0x00020001 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_mc_config = 0x00000003 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_tl_api = 0x00010014 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_dr_api = 0x00010004 |
| [ 3.323481] [5: mcDriverDaemon: 2786] version_nwd = 0x00060003 |
| [ 3.323481] [5: mcDriverDaemon: 2786] |
| [ 3.323569] [5: mcDriverDaemon: 2786] Trustonic TEE: mobicore_start: SWd uses LPAE MMU table format |
| [ 3.324985] [5: mcDriverDaemon: 2786] Trustonic TEE: admin_open: daemon connection open, TGID 2786 |
| [ 3.331692] [3:dbmdx probe thr: 1902] dbmd_4_6-spi spi2.0: spi_set_speed Update SPI Max Speed to 4800000 Hz, bpw: 8, mode: 0 |
| [ 3.334117] [7:dbmdx probe thr: 1902] dbmd_4_6-spi spi2.0: spi_verify_chip_id: Chip ID was successfully verified: 0xdb40 |
| [ 3.337287] [6: init: 1] init: Service 'scs' (pid 2779) exited with status 0 |
| [ 3.342796] [6: init: 1] init: Service 'auditd' (pid 2791) exited with status 0 |
| [ 3.432355] [2: kworker/2:1: 1963] Trustonic TEE: 601|TA SPT2 : Starting. |
| [ 3.432376] [2: kworker/2:1: 1963] Trustonic TEE: 601|TA SPT2 : tbase info. |
| [ 3.432389] [2: kworker/2:1: 1963] Trustonic TEE: 601|tlApi version = 0x00010014 |
| [ 3.432401] [2: kworker/2:1: 1963] Trustonic TEE: 601|productId = t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 3.432414] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionMci = 0x00010006 |
| [ 3.432426] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionSo = 0x00020002 |
| [ 3.432438] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionMclf = 0x00020005 |
| [ 3.432450] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionContainer = 0x00020001 |
| [ 3.432462] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionMcConfig = 0x00000003 |
| [ 3.432474] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionTlApi = 0x00010014 |
| [ 3.432486] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionDrApi = 0x00010004 |
| [ 3.432499] [2: kworker/2:1: 1963] Trustonic TEE: 601|versionCmp = 0x00000000 |
| [ 3.443226] [4: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 3.443392] [2: kworker/2:1: 1963] Trustonic TEE: 701|[srpmb] Driver: SRPMB F/W version: 24171027 |
| [ 3.444312] [0: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 3.444808] [0: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 3.445262] [0: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 3.445299] [2: kworker/2:1: 1963] Trustonic TEE: 701|[srpmb] Passed magic number |
| [ 3.445700] [0: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 3.446146] [0: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 3.447738] [2: kworker/2:1: 1963] Trustonic TEE: 701|SEC_DRIVER_2.0_2017.11.15 |
| [ 3.459750] [2: kworker/2:1: 1963] Trustonic TEE: 801|drTima: starting main driver thread |
| [ 3.459770] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: OpenSSL premainInit Begins |
| [ 3.459783] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: Embedded = [627A3930684ED845DE3192F8A93F7DD7E98E346F] |
| [ 3.463736] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: Calculated = [627A3930684ED845DE3192F8A93F7DD7E98E346F] |
| [ 3.463756] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS Integrity check passed. |
| [ 3.463768] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS DRBG selftest passed. |
| [ 3.463780] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS x931 selftest passed. |
| [ 3.463792] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS Sha1 selftest passed. |
| [ 3.463806] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS hmac selftest passed. |
| [ 3.463818] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS cmac selftest passed. |
| [ 3.463830] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS AES selftest passed. |
| [ 3.463844] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS AES_CCM selftest passed. |
| [ 3.463856] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS AES_GCM selftest passed. |
| [ 3.463869] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS AES_XTS selftest passed. |
| [ 3.463881] [2: kworker/2:1: 1963] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS DES selftest passed. |
| [ 3.491722] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS RSA selftest passed. |
| [ 3.519721] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS ECDSA selftest passed. |
| [ 3.539705] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS DSA selftest passed. |
| [ 3.543707] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: FIPS ECDH selftest passed. |
| [ 3.543725] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: POST(Power-On-Self-Test) passed. |
| [ 3.543740] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: OpenSSL started in fips mode |
| [ 3.543754] [3: kworker/3:1: 1961] Trustonic TEE: 801|SCRYPTO DRV [INFO]: OpenSSL premainInit ends |
| [ 3.543765] [3: kworker/3:1: 1961] Trustonic TEE: 801|[RTIC] Driver:: rtic_init_done |
| [ 3.547988] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_start_paddr2 is 0xb8100000 |
| [ 3.548000] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 3.548018] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_size2 is 0xff000 |
| [ 3.548029] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_hdr_vaddr2 is 0x8e000 |
| [ 3.548041] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_data_vaddr2 is 0x0 |
| [ 3.548054] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_start_paddr2 is 0xb8000000 |
| [ 3.548065] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_size2 is 0x100000 |
| [ 3.548076] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_hdr_vaddr2 is 0x90000 |
| [ 3.548087] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_data_vaddr2 is 0x0 |
| [ 3.548098] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->magic is 0x0 |
| [ 3.548109] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->log_start_addr is 0x0 |
| [ 3.548125] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->log_write_addr is 0x0 |
| [ 3.548136] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->num_log_entries is 0x0 |
| [ 3.548148] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->magic is 0xaabbccdd |
| [ 3.548160] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->log_start_addr is 0xb8100080 |
| [ 3.548172] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->log_write_addr is 0xb8100080 |
| [ 3.548201] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->num_log_entries is 0x0 |
| [ 3.548213] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->magic is 0x0 |
| [ 3.548224] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->log_start_addr is 0x0 |
| [ 3.548235] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->log_write_addr is 0x0 |
| [ 3.548248] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[1]: header_ptr->num_log_entries is 0x0 |
| [ 3.548271] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->magic is 0xaabbccdd |
| [ 3.548283] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->log_start_addr is 0xb8000080 |
| [ 3.548306] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->log_write_addr is 0xb8000080 |
| [ 3.548319] [3: kworker/3:1: 1961] Trustonic TEE: 801|log.c[2]: header_ptr->num_log_entries is 0x0 |
| [ 3.548344] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_start_paddr3 is 0xb8100000 |
| [ 3.548357] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_size3 is 0xff000 |
| [ 3.548371] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_hdr_vaddr3 is 0x8e000 |
| [ 3.548384] [3: kworker/3:1: 1961] Trustonic TEE: 801|sec_log_info.log_data_vaddr3 is 0x0 |
| [ 3.548399] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_start_paddr3 is 0xb8000000 |
| [ 3.548411] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_size3 is 0x100000 |
| [ 3.548425] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_hdr_vaddr3 is 0x90000 |
| [ 3.548437] [3: kworker/3:1: 1961] Trustonic TEE: 801|dbg_log_info.log_data_vaddr3 is 0x0 |
| [ 3.548450] [3: kworker/3:1: 1961] Trustonic TEE: 801|write_ptr_paddr is b8000080 |
| [ 3.548462] [3: kworker/3:1: 1961] Trustonic TEE: 801|write_ptr_paddr is b8000080 |
| [ 3.549281] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 3.562610] [3: mcDriverDaemon: 2786] TUI file opened |
| [ 3.562636] [3: mcDriverDaemon: 2786] t-base-tui module: ioctl 0x7404 |
| [ 3.562647] [3: mcDriverDaemon: 2786] TUI_IO_INIT_DRIVER |
| [ 3.562735] [7: tee_tui: 2805] tlc_open: Opening tbase device |
| [ 3.562740] [3: mcDriverDaemon: 2786] TUI file closed |
| [ 3.562753] [7: tee_tui: 2805] tlc_open: Opening driver session |
| [ 3.563123] [4: kworker/4:1: 1964] Trustonic TEE: 901|[KEYMAN] Driver: Driver thread started |
| [ 3.563139] [4: kworker/4:1: 1964] Trustonic TEE: 901|[KEYMAN] Driver: IPC memory request: success |
| [ 3.563153] [4: kworker/4:1: 1964] Trustonic TEE: 901|[KEYMAN] Driver: CryptoManager F/W version: 0x40171030 |
| [ 3.563164] [4: kworker/4:1: 1964] Trustonic TEE: 901|[KEYMAN] drExchLoop(): Exception handler thread is running |
| [ 3.571089] [7: tee_tui: 2805] tlc_process_cmd: TlcTui DCI Version (1.1) |
| [ 3.571099] [7: tee_tui: 2805] tlc_process_cmd: DrTui DCI Version (1.1) |
| [ 3.571545] [4: kworker/4:1: 1964] Trustonic TEE: a01|TUI Driver API, Build Nov 20 2017, 10:26:08 |
| [ 3.571564] [4: kworker/4:1: 1964] Trustonic TEE: a01|Build by lukhan01@DE0015 11/20/17 10:26:07_71425 |
| [ 3.571655] [4: kworker/4:1: 1964] Trustonic TEE: a01|TUI HAL version 2.1 build Nov 20 2017, 21:28:26 |
| [ 3.778053] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_log_register_buffer_work_func(ffffffc87494e810, 0, ffffff800eee9000) |
| [ 3.787428] [4: init: 1] init: SELINUX: pkgdir_selabel_lookup, reloading seapp_contexts only once, pathname:/data/user_de/0, uid:-1 |
| [ 3.787760] [4: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 3.789574] [4: init: 1] init: SELINUX: pkgdir_selabel_lookup, reloading seapp_contexts only once, pathname:/data/user/0, uid:-1 |
| [ 3.826354] [4: init: 1] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'... |
| [ 3.843119] [4: init: 1] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 2867) exited with status 0 |
| [ 3.860622] [6: init: 1] init: do_restorecon: Could not access /carrier |
| [ 3.875192] [6: init: 1] init: Unable to open persistent property file "persist.radio.carrier.enable": No such file or directory |
| [ 3.875412] [6: init: 1] init: Starting service 'logd-reinit'... |
| [ 3.878291] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[0] |
| [ 3.878342] [6: init: 1] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory |
| [ 3.879479] [6: init: 1] [sec_input] gpio-keys: KEY_VOLUMEDOWN wakeup status 0 |
| [ 3.879489] [6: init: 1] [sec_input] gpio-keys: KEY_VOLUMEUP wakeup status 0 |
| [ 3.879497] [6: init: 1] [sec_input] gpio-keys: KEY_POWER default wakeup status 1 |
| [ 3.881089] [6: init: 1] init: write_file: Unable to open '/sys/class/power_supply/battery/batt_update_data': Permission denied |
| [ 3.885489] [6: init: 1] init: cannot find '/system/bin/sysmon' (No such file or directory), disabling 'sysmon' |
| [ 3.885511] [6: init: 1] init: Starting service 'healthd'... |
| [ 3.886238] [6: init: 1] init: Starting service 'vaultkeeperd'... |
| [ 3.886754] [6: init: 1] init: Starting service 'prepare_param'... |
| [ 3.887166] [6: init: 1] init: cannot find '/system/bin/watchdog_break.sh' (No such file or directory), disabling 'watchdog_break' |
| [ 3.887193] [6: init: 1] init: Starting service 'swapon'... |
| [ 3.887807] [6: init: 1] init: Starting service 'lmkd'... |
| [ 3.888538] [6: init: 1] init: Starting service 'servicemanager'... |
| [ 3.889250] [6: init: 1] init: Starting service 'surfaceflinger'... |
| [ 3.890362] [6: init: 1] usb: enable_store: already disabled |
| [ 3.890507] [6: init: 1] init: property 'sys.usb.config' doesn't exist while expanding '${sys.usb.config}' |
| [ 3.890518] [6: init: 1] init: setprop: cannot expand '${sys.usb.config}' |
| [ 3.890681] [6: init: 1] init: property_set("ro.radio.noril", "no") failed |
| [ 3.892568] [4: healthd: 2871] binder: 2871:2871 transaction failed 29189, size 0-0 |
| [ 3.897492] [6: init: 1] acc_alloc |
| [ 3.898438] [1: sswap: 2874] Adding 2097148k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:2097148k SSFS |
| [ 3.899440] [6: init: 1] init: Service 'swapon' (pid 2874) exited with status 0 |
| [ 3.899881] [6: init: 1] init: Starting service 'secure_storage'... |
| [ 3.901416] [6: init: 1] init: Starting service 'wsmd'... |
| [ 3.902931] [6: init: 1] init: Starting service 'exec 2 (/system/bin/vdc)'... |
| [ 3.905429] [1: logd.daemon: 2780] logd.daemon: reinit |
| [ 3.907532] [6: init: 1] init: Service 'logd-reinit' (pid 2869) exited with status 0 |
| [ 3.923484] [6: init: 1] init: Service 'exec 2 (/system/bin/vdc)' (pid 2882) exited with status 0 |
| [ 3.942739] [1: kworker/1:2: 2019] Trustonic TEE: b01|ICCC:Trustlet ICCC::Starting |
| [ 3.943298] [1: kworker/1:2: 2019] Trustonic TEE: b01|TL ICCC: we got a command: 3 |
| [ 3.943319] [1: kworker/1:2: 2019] Trustonic TEE: b01|ICCC :case ICCC_READDATA_TA |
| [ 3.943331] [1: kworker/1:2: 2019] Trustonic TEE: b01| ICCC : ICCC_read_data type = fff0000b |
| [ 3.943342] [1: kworker/1:2: 2019] Trustonic TEE: b01|iccc: ICCC_read_data@# |
| [ 3.943353] [1: kworker/1:2: 2019] Trustonic TEE: b01|ICCC Magic Got is = fffa , ret is = 0 |
| [ 3.943364] [1: kworker/1:2: 2019] Trustonic TEE: b01|ICCC : value = 0 |
| [ 3.943375] [1: kworker/1:2: 2019] Trustonic TEE: b01|ICCC : respmsg->content.iccc_rsp.type= fff0000b |
| [ 3.944442] [4: vold: 2883] System has 8 CPU's, we are on CPU #4 |
| [ 3.944442] [4: vold: 2883] Binding this process to CPU #0. |
| [ 3.944442] [4: vold: 2883] active mask is ff, setting it to mask=1 |
| [ 3.945148] [0: vold: 2883] And now we are on CPU #0 |
| [ 3.945162] [0: vold: 2883] [oemflag]CPU 0 |
| [ 3.945172] [0: vold: 2883] [oemflag]default |
| [ 3.945182] [0: vold: 2883] [oemflag]get_fuse_new |
| [ 3.945191] [0: vold: 2883] [oemflag]get_fuse_name : 5 |
| [ 3.945219] [0: vold: 2883] [oemflag]get_oemflag_value : 0 |
| [ 3.945230] [0: vold: 2883] System has 8 CPU's, we are on CPU #0 |
| [ 3.945230] [0: vold: 2883] Binding this process to CPU #0. |
| [ 3.945230] [0: vold: 2883] active mask is ff, setting it to mask=ff |
| [ 3.945258] [0: vold: 2883] And now we are on CPU #0 |
| [ 3.945267] [0: vold: 2883] [oemflag]ALL CPU (new_to) |
| [ 3.963554] [6: init: 1] usb: enable_store: already disabled |
| [ 3.963688] [6: init: 1] usb: make_usb_func_link: enable device[mtp] |
| [ 3.963698] [6: init: 1] usb: make_usb_func_link: enable device[acm] |
| [ 3.963703] [6: init: 1] usb: acm is enabled. (bcdDevice=0x400) |
| [ 3.963745] [6: init: 1] gadget_dev_desc_UDC_store: +++ |
| [ 3.963766] [6: init: 1] usb: usb_string_ids_tab --cdev(0xffffffc86f2eebc8)->next_string_id=0 |
| [ 3.963772] [6: init: 1] usb: usb_string_ids_tab --cdev(0xffffffc86f2eebc8)->next_string_id=3 |
| [ 3.963778] [6: init: 1] [mtpg_function_bind] line = [1407] |
| [ 3.963783] [6: init: 1] usb: usb_string_id cdev(0xffffffc86f2eebc8)->next_string_id=5 |
| [ 3.963808] [6: init: 1] dual speed mtp: IN/ep1in, OUT/ep1out |
| [ 3.963814] [6: init: 1] usb: usb_string_ids_tab --cdev(0xffffffc86f2eebc8)->next_string_id=5 |
| [ 3.963822] [6: init: 1] DUN is registerd |
| [ 3.964049] [6: init: 1] gadget_dev_desc_UDC_store: --- |
| [ 3.964108] [6: init: 1] usb: enable_store: Connect gadget: enabled=1, dev->enabled=0 |
| [ 3.978498] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[1] |
| [ 4.041891] [3: kworker/3:1: 1961] Trustonic TEE: b01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 4.041912] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 4.043676] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 4.043696] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: vk_switcher: vkeeper_vault / solution(3) |
| [ 4.044996] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 4.045594] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: [CMD:BRING_UP] |
| [ 4.046399] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 4.047655] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: vkmc_bring_up |
| [ 4.047670] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 4.047684] [3: kworker/3:1: 1961] Trustonic TEE: b01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80008000] |
| [ 4.078772] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[2] |
| [ 4.095705] [4: kworker/4:1: 1964] Trustonic TEE: b01|VALIDATOR [INFO ]: SPID - 0x00000000 Secure Storage Driver version 1.8.25, dev, t-base. |
| [ 4.122584] [3: kworker/3:1: 1961] Trustonic TEE: c01|[skeymast:SCrypto] <INFO> SCrypto 2.1 is in FIPS approved mode |
| [ 4.123135] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:82) Start MDFPP keymaster version 1.8.6.1 SCrypto v2.1 |
| [ 4.123152] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:85) Mobicore version : t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 4.123167] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:86) API version : 0x10014 |
| [ 4.137407] [2: surfaceflinger: 2877] decon: decon_release + |
| [ 4.137428] [2: surfaceflinger: 2877] decon: decon_release - |
| [ 4.138545] [5: kworker/5:1: 1505] Trustonic TEE: d01|TRUST_SS[I]: SPID - 0x00000000 Secure Storage Trustlet version 1.8.25, dev, t-base. |
| [ 4.138568] [5: kworker/5:1: 1505] Trustonic TEE: b02|VALIDATOR [INFO ]: SPID - 0x00000000 DDR SIZE : 6G |
| [ 4.138581] [5: kworker/5:1: 1505] Trustonic TEE: b02|VALIDATOR [INFO ]: SPID - 0x00000000 Magic code is found |
| [ 4.141714] [0: surfaceflinger: 2877] decon: decon_pan_display: decon0 state(0), UNBLANK missed |
| [ 4.142386] [0: surfaceflinger: 2877] decon: decon_release + |
| [ 4.142407] [0: surfaceflinger: 2877] decon: decon_release - |
| [ 4.142846] [0: surfaceflinger: 2877] decon: decon_release + |
| [ 4.142865] [0: surfaceflinger: 2877] decon: decon_release - |
| [ 4.179054] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[3] |
| [ 4.229541] [3: kworker/3:1: 1961] Trustonic TEE: c01|[skeymast:SCrypto] <INFO> SCrypto 2.1 is in FIPS approved mode |
| [ 4.229563] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:82) Start MDFPP keymaster version 1.8.6.1 SCrypto v2.1 |
| [ 4.229579] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:85) Mobicore version : t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 4.229593] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:86) API version : 0x10014 |
| [ 4.229608] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:154) =CASE TZ_TA_KM_BEGIN= |
| [ 4.229622] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_blob_routines.c:808) blob version : 15 |
| [ 4.232607] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 4.233094] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:159) =CASE TZ_TA_KM_UPDATE= |
| [ 4.233114] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 4.235462] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:164) =CASE TZ_TA_KM_FINISH= |
| [ 4.253166] [3: kworker/3:1: 1961] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 4.259035] [5: vold: 2883] exynos_fmp_get_pdevice: Found FMP device ffffffc86f548700 |
| [ 4.259053] [5: vold: 2883] exynos_fmp_get_pdevice: Matching platform device ffffffc8748be800 |
| [ 4.259063] [5: vold: 2883] crypt_ctr_cipher: H/W FMP disk encryption |
| [ 4.259106] [5: vold: 2883] crypt_setkey_allcpus: fmp disk key is set |
| [ 4.259788] [0: vold: 2883] device-mapper: table: 254:1: adding target device (start sect 0 len 112918496) caused an alignment inconsistency |
| [ 4.279291] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[4] |
| [ 4.289387] [5: vold: 2883] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-1 |
| [ 4.369984] [0: vold: 2883] e2fsck: e2fsck 1.42.9 (28-Dec-2013) |
| [ 4.369984] [0: vold: 2883] |
| [ 4.370045] [0: vold: 2883] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear. |
| [ 4.370045] [0: vold: 2883] |
| [ 4.370099] [0: vold: 2883] e2fsck: check whether gdt & bitmap free count is vaild |
| [ 4.370099] [0: vold: 2883] |
| [ 4.370125] [0: vold: 2883] e2fsck: /dev/block/dm-1: clean, 5630/1765376 files, 396914/14114812 blocks |
| [ 4.370125] [0: vold: 2883] |
| [ 4.370149] [0: vold: 2883] e2fsck: ext2fs_close2 : normal operation, return 0 |
| [ 4.370149] [0: vold: 2883] |
| [ 4.373240] [6: vold: 2883] Setting journal tag on volname[(null)] |
| [ 4.374003] [5: vold: 2883] EXT4-fs (dm-1): Root reserved blocks 2048 |
| [ 4.374018] [5: vold: 2883] EXT4-fs (dm-1): Reserve inodes (4096/1765376) |
| [ 4.375259] [6: vold: 2883] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic |
| [ 4.375431] [6: vold: 2883] fs_mgr: __mount(source=/dev/block/dm-1,target=/data,type=ext4)=0 |
| [ 4.375497] [6: vold: 2883] fs_mgr: __mount return 0(source=dm-1,target=/data,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic) |
| [ 4.375497] [6: vold: 2883] |
| [ 4.375679] [6: vold: 2883] fs_mgr: Cannot set clusters for super-user: open /sys/fs/ext4/dm-1/r_blocks_count failed |
| [ 4.379039] [6: init: 1] init: Unable to open persistent property file "persist.radio.carrier.enable": No such file or directory |
| [ 4.379559] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[5] |
| [ 4.479880] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[6] |
| [ 4.547485] [6: init: 1] init: cannot find '/system/bin/sysmon' (No such file or directory), disabling 'sysmon' |
| [ 4.547726] [6: init: 1] init: Starting service 'scs'... |
| [ 4.548436] [6: init: 1] init: Starting service 'logd-reinit'... |
| [ 4.553017] [6: init: 1] init: Starting service 'zygote'... |
| [ 4.553666] [6: init: 1] init: Starting service 'zygote_secondary'... |
| [ 4.556785] [7: init: 2948] init: couldn't write 2948 to /dev/cpuset/zygote_secondary/tasks: No such file or directory |
| [ 4.557353] [5: init: 2947] init: couldn't write 2947 to /dev/cpuset/zygote/tasks: No such file or directory |
| [ 4.557434] [5: init: 2947] init: couldn't write 2947 to /sys/fs/cgroup/stune/foreground/tasks: No such file or directory |
| [ 4.564581] [6: init: 1] usb: enable_store: Disconnect gadget: enabled=0, dev->enabled=1 |
| [ 4.564661] [6: init: 1] usb: android_disconnect con(0), sw(0) |
| [ 4.564667] [6: init: 1] usb: android_disconnect mute_switch con(0) sw(0) |
| [ 4.564677] [6: init: 1] configfs-gadget gadget: unbind function 'mtp'/ffffffc86f34c000 |
| [ 4.564683] [6: init: 1] [mtpg_function_unbind] line = [1378] |
| [ 4.564712] [6: init: 1] configfs-gadget gadget: unbind function 'acm'/ffffffc86d123800 |
| [ 4.564719] [6: init: 1] DUN is unregisterd |
| [ 4.564945] [6: init: 1] usb: make_usb_func_link: enable device[mtp] |
| [ 4.564952] [6: init: 1] usb: make_usb_func_link: enable device[acm] |
| [ 4.564956] [6: init: 1] usb: acm is enabled. (bcdDevice=0x400) |
| [ 4.564961] [6: init: 1] usb: make_usb_func_link: enable device[adb] |
| [ 4.565002] [6: init: 1] gadget_dev_desc_UDC_store: +++ |
| [ 4.565019] [6: init: 1] usb: usb_string_ids_tab --cdev(0xffffffc86f2eebc8)->next_string_id=0 |
| [ 4.565026] [6: init: 1] usb: usb_string_ids_tab --cdev(0xffffffc86f2eebc8)->next_string_id=3 |
| [ 4.565031] [6: init: 1] [mtpg_function_bind] line = [1407] |
| [ 4.565036] [6: init: 1] usb: usb_string_id cdev(0xffffffc86f2eebc8)->next_string_id=5 |
| [ 4.565062] [6: init: 1] dual speed mtp: IN/ep1in, OUT/ep1out |
| [ 4.565068] [6: init: 1] usb: usb_string_ids_tab --cdev(0xffffffc86f2eebc8)->next_string_id=5 |
| [ 4.565076] [6: init: 1] DUN is registerd |
| [ 4.565165] [6: init: 1] gadget_dev_desc_UDC_store: --- |
| [ 4.565207] [6: init: 1] usb: enable_store: Connect gadget: enabled=1, dev->enabled=0 |
| [ 4.565247] [6: init: 1] init: Starting service 'adbd'... |
| [ 4.567348] [6: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 4.568010] [6: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 4.570639] [6: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin. |
| [ 4.570747] [6: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 4.571574] [6: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.1.1_0004, [-1 -1 -1 -1 0 1] |
| [ 4.572482] [2: logd.daemon: 2780] logd.daemon: reinit |
| [ 4.580208] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[7] |
| [ 4.581220] [6: init: 1] init: Service 'logd-reinit' (pid 2946) exited with status 0 |
| [ 4.582537] [6: init: 1] init: property_set("ro.csc.country_code", "UAE") failed |
| [ 4.582911] [6: init: 1] init: property_set("ro.csc.countryiso_code", "AE") failed |
| [ 4.584606] [6: init: 1] init: property_set("ro.csc.sales_code", "XSG") failed |
| [ 4.585441] [6: init: 1] init: Not bootcharting. |
| [ 4.585530] [6: init: 1] init: property_set("ro.oem.key1", "XSG") failed |
| [ 4.587729] [7: usb open: 2952] adb_open |
| [ 4.603380] [6: init: 1] init: property_set("ro.csc.omcnw_code", "XSG") failed |
| [ 4.611470] [6: init: 1] init: property_set("ro.csc.facebook.partnerid", "samsung:dec1cc9c-1497-4aab-b953-cee702c2a481") failed |
| [ 4.615347] [6: init: 1] init: property_set("ro.com.google.clientidbase.ms", "android-samsung-ga-rev1") failed |
| [ 4.618013] [6: init: 1] init: Service 'scs' (pid 2945) exited with status 0 |
| [ 4.656509] [4: init: 1] init: Starting service 'auditd'... |
| [ 4.685548] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[8] |
| [ 4.755211] [6: init: 1] init: SELinux: Skipping restorecon_recursive(/data) |
| [ 4.755685] [6: init: 1] init: Starting service 'exec 3 (/system/bin/tzdatacheck)'... |
| [ 4.780358] [4: init: 1] init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 2964) exited with status 0 |
| [ 4.780608] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[9] |
| [ 4.813255] [4: init: 1] init: do_restorecon: Could not access /carrier |
| [ 4.824168] [4: init: 1] init: property_set("ro.mst.support", "1") failed |
| [ 4.849462] [0: kworker/0:2: 2018] Cryptfs: Cannot open /cache/fota/fota_path_command |
| [ 4.880882] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[10] |
| [ 4.897837] [5: healthd: 2871] healthd: initial Capacity max: '1000' |
| [ 4.897965] [5: healthd: 2871] sec-battery battery: sec_bat_store_attrs: BATT_CAPACITY_MAX(1000), fg_reset(0) |
| [ 4.897987] [5: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_fg_set_property: capacity_max changed, 1000 -> 1000 |
| [ 4.898493] [4: init: 1] init: [PDP] -- Start PDP [restore] mode --------------------------------- |
| [ 4.898666] [4: init: 1] init: [PDP]!CheckFILE : [ ca he pd _b up pd _b up pd _l st tx ] is Not Exist |
| [ 4.898691] [4: init: 1] init: [PDP] Restore - No List-File (/Ca/p_bk/list_file) |
| [ 4.898725] [4: init: 1] init: [PDP]!CheckDir : [ ca he pd _b up ] is not Exist |
| [ 4.898742] [4: init: 1] init: [PDP] -- End of PDP |
| [ 4.898795] [4: init: 1] init: [PDP] -- Start PDP [backup] mode --------------------------------- |
| [ 4.898953] [4: init: 1] init: [PDP] int do_pdp_CheckEarSecu() EAR-MIC is missing |
| [ 4.899154] [4: init: 1] [sec_input] keycode_pressed_show: 114:0,115:0,116:0 |
| [ 4.899196] [4: init: 1] init: [PDP] E Secu. stat : (0) |
| [ 4.899214] [4: init: 1] init: [PDP] K Secu. stat : (17) |
| [ 4.899230] [4: init: 1] init: [PDP] -- End of PDP |
| [ 4.900165] [4: init: 1] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 4 (/system/bin/update_verifier)' |
| [ 4.900262] [5: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 4.900871] [4: init: 1] init: Starting service 'SIDESYNC_service'... |
| [ 4.902176] [4: init: 1] init: Starting service 'drm'... |
| [ 4.903052] [5: healthd: 2871] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36) |
| [ 4.903892] [4: init: 1] init: Starting service 'flash_recovery'... |
| [ 4.905591] [4: init: 1] init: Starting service 'apaservice'... |
| [ 4.907142] [4: init: 1] init: Starting service 'jackservice'... |
| [ 4.909051] [4: init: 1] init: Starting service 'sensorhubservice'... |
| [ 4.910810] [4: init: 1] init: Starting service 'TvoutService_C'... |
| [ 4.912683] [4: init: 1] init: Starting service 'argos-daemon'... |
| [ 4.913978] [4: init: 1] init: Starting service 'gpsd'... |
| [ 4.914993] [4: init: 1] init: Starting service 'cpboot-daemon'... |
| [ 4.916355] [0: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (14) data1 (9) |
| [ 4.916375] [0: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5659) |
| [ 4.916388] [0: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0) |
| [ 4.917249] [4: init: 1] init: Starting service 'imsd'... |
| [ 4.919088] [4: init: 1] init: Starting service 'macloader'... |
| [ 4.920548] [0: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf988), avg current (404)mA |
| [ 4.920567] [0: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 4.920950] [4: init: 1] init: Starting service 'epmlogd'... |
| [ 4.922729] [4: init: 1] init: Starting service 'sdp_cryptod'... |
| [ 4.924976] [4: init: 1] init: Starting service 'audioserver'... |
| [ 4.926810] [4: init: 1] init: Starting service 'cameraserver'... |
| [ 4.929339] [4: init: 1] init: Starting service 'DR-daemon'... |
| [ 4.931131] [4: init: 1] init: Starting service 'BCS-daemon'... |
| [ 4.932669] [4: init: 2985] init: couldn't write 2985 to /dev/cpuset/camera-daemon/tasks: No such file or directory |
| [ 4.932743] [4: init: 2985] init: couldn't write 2985 to /dev/cpuset/cameraserver/tasks: No such file or directory |
| [ 4.946846] [4: init: 1] init: Starting service 'ril-daemon'... |
| [ 4.947140] [4: init: 2984] init: couldn't write 2984 to /dev/cpuset/audioserver/tasks: No such file or directory |
| [ 4.949806] [4: init: 1] init: Starting service 'SMD-daemon'... |
| [ 4.963679] [4: init: 1] init: Starting service 'DIAG-daemon'... |
| [ 4.965539] [4: init: 1] init: Starting service 'installd'... |
| [ 4.967343] [4: init: 1] init: Starting service 'keystore'... |
| [ 4.971159] [3: cbd: 2979] mif: cbd: check_debug_level: debug level=0, cp_debug=0 |
| [ 4.971189] [3: cbd: 2979] mif: cbd: main: Start CP Boot Daemon (CBD) |
| [ 4.971269] [3: cbd: 2979] mif: cbd: main: SS310 modem |
| [ 4.971321] [3: cbd: 2979] mif: cbd: main: partition number : platform/13500000.dwmmc0/by-name/RADIO |
| [ 4.971354] [3: cbd: 2979] mif: cbd: main: partition path : /dev/block/platform/13500000.dwmmc0/by-name/RADIO |
| [ 4.971384] [3: cbd: 2979] mif: cbd: main: partition number : platform/13500000.dwmmc0/by-name/CP_DEBUG |
| [ 4.971414] [3: cbd: 2979] mif: cbd: main: partition path : /dev/block/platform/13500000.dwmmc0/by-name/CP_DEBUG |
| [ 4.971448] [3: cbd: 2979] capability: warning: `cbd' uses deprecated v2 capabilities in a way that may be insecure |
| [ 4.971753] [3: cbd: 2979] mif: cbd: main: Modem type = 13 |
| [ 4.971778] [3: cbd: 2979] mif: cbd: main: Boot link = 9 |
| [ 4.971793] [3: cbd: 2979] mif: cbd: main: Main link = 9 |
| [ 4.981133] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[11] |
| [ 4.986612] [4: init: 1] init: Starting service 'mediacodec'... |
| [ 4.991208] [4: init: 1] init: Starting service 'mediadrm'... |
| [ 4.993127] [4: init: 1] init: Starting service 'mediaextractor'... |
| [ 4.994714] [4: init: 1] init: Starting service 'media'... |
| [ 4.997774] [4: init: 2996] init: couldn't write 2996 to /dev/cpuset/mediacodec/tasks: No such file or directory |
| [ 5.006435] [4: init: 1] init: Starting service 'netd'... |
| [ 5.008433] [4: init: 1] init: Starting service 'remotedisplay'... |
| [ 5.020027] [5: init: 2998] init: couldn't write 2998 to /dev/cpuset/mediadrm/tasks: No such file or directory |
| [ 5.020576] [5: init: 2999] init: couldn't write 2999 to /dev/cpuset/mediaextractor/tasks: No such file or directory |
| [ 5.021024] [5: init: 3000] init: couldn't write 3000 to /dev/cpuset/media/tasks: No such file or directory |
| [ 5.021647] [4: init: 1] init: Starting service 'visiond'... |
| [ 5.023554] [3: cbd: 2979] mif: cbd: start_shannon310_boot: CP boot device = /dev/umts_boot0 |
| [ 5.023678] [3: cbd: 2979] mif: cbd: start_shannon310_boot: CP binary file = /dev/block/platform/13500000.dwmmc0/by-name/RADIO |
| [ 5.023716] [3: cbd: 2979] mif: cbd: start_shannon310_boot: CP NV file = /efs/nv_data.bin |
| [ 5.023746] [3: cbd: 2979] mif: cbd: start_shannon310_boot: BOOT link SHMEM |
| [ 5.023774] [3: cbd: 2979] mif: cbd: start_shannon310_boot: MAIN link SHMEM |
| [ 5.024109] [4: init: 1] init: Starting service 'bootchecker'... |
| [ 5.028744] [5: ss_conn_daemon: 2970] conn_gadget_open |
| [ 5.028779] [5: ss_conn_daemon: 2970] conn_gadget_flush |
| [ 5.028794] [5: ss_conn_daemon: 2970] conn_gadget_release |
| [ 5.031047] [5: ss_conn_daemon: 2970] conn_gadget_in_max_packet_size_show() _conn_gadget_dev is NULL |
| [ 5.031521] [5: ss_conn_daemon: 2970] conn_gadget_out_max_packet_size_show() _conn_gadget_dev is NULL |
| [ 5.039828] [5: ss_conn_daemon: 2970] conn_gadget_open |
| [ 5.046276] [4: init: 1] init: Starting service 'fingerprintd'... |
| [ 5.046914] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3867) |
| [ 5.046938] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56 |
| [ 5.047693] [5: ss_conn_daemon: 3003] conn_gadget_poll() _conn_gadget_dev is offlined |
| [ 5.047967] [4: init: 1] init: Starting service 'faced'... |
| [ 5.049683] [4: init: 1] init: Starting service 'remosaic_daemon'... |
| [ 5.051417] [4: init: 1] init: Starting service 'gatekeeperd'... |
| [ 5.053462] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3874) |
| [ 5.054756] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 5.055403] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 5.056700] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf25d) |
| [ 5.056709] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (852)mA |
| [ 5.056715] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 5.066779] [5: ss_conn_daemon: 3003] conn_gadget_poll() _conn_gadget_dev is offlined |
| [ 5.066838] [5: ss_conn_daemon: 3003] conn_gadget_poll() _conn_gadget_dev is offlined |
| [ 5.068087] [4: init: 3007] init: couldn't write 3007 to /dev/cpuset/visiond/tasks: No such file or directory |
| [ 5.078774] [7: healthd: 2871] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xf8, 0x05:0x7b, 0x06:0x5d, 0x07:0xf2, 0x08:0x3a, 0x09:0x24, 0x0a:0xe6, 0x0b:0x1c, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 5.078791] [7: healthd: 2871] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 5.079666] [7: healthd: 2871] healthd: initial cisd_data: 0 7 1 3000 3000 0 0 0 0 0 0 0 0 0 0 0 267 222 339 236 0 0 0 0 -300 1000 -300 1000 -300 1000 -300 1000 0 0 0 0 0 0 0 0 0 0 1 3000 3000 0 0 0 0 0 0 0 0 0 0 265 236 294 263 0 0 0 0 -300 1000 -300 1000 -300 1000 -300 1000 0 0 0 0 0 0 0 0 0 0 |
| [ 5.079749] [7: healthd: 2871] sec_bat_store_attrs: 0 7 1 3000 3000 0 0 0 0 0 0 0 0 0 0 0 267 222 339 236 0 0 0 0 -300 1000 -300 1000 -300 1000 -300 1000 0 0 0 0 0 0 0 0 0 0 1 3000 3000 0 0 0 0 0 0 0 0 0 0 265 236 294 263 0 0 0 0 -300 1000 -300 1000 -300 1000 -300 1000 0 0 0 0 0 0 0 0 0 0 |
| [ 5.079765] [7: healthd: 2871] sec_bat_store_attrs: update cisd data |
| [ 5.079815] [3: diagexe: 2992] capability: warning: `diagexe' uses 32-bit capabilities (legacy support in use) |
| [ 5.080114] [7: healthd: 2871] healthd: initial cisd_wc_data: 0 0 0 0 0 0 0 0 0 0 |
| [ 5.080163] [7: healthd: 2871] sec_bat_store_attrs: 0 0 0 0 0 0 0 0 0 0 |
| [ 5.080674] [7: healthd: 2871] healthd: initial wire_count: '0' |
| [ 5.080693] [7: healthd: 2871] sec_bat_store_attrs: Wire Count : 0 |
| [ 5.080718] [3: diagexe: 2992] mif: misc_open: umts_dm0 (opened 1) by diagexe |
| [ 5.080945] [7: healthd: 2871] healthd: initial batt_type: GH43-04793A+AA1JB17ZS+XXXXXXX |
| [ 5.081217] [7: healthd: 2871] healthd: BatteryFullChargePath not found |
| [ 5.081229] [7: healthd: 2871] healthd: BatteryCycleCountPath not found |
| [ 5.081237] [7: healthd: 2871] healthd: batteryPogoOnlnePath not found |
| [ 5.081244] [7: healthd: 2871] healthd: batteryPrevDataPath not found |
| [ 5.081251] [7: healthd: 2871] healthd: batterySWSelfDischargingPath not found |
| [ 5.081303] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 5.081397] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[12] |
| [ 5.081546] [7: healthd: 2871] healthd: RTC was not reset |
| [ 5.082396] [7: healthd: 2871] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 5.083363] [7: healthd: 2871] healthd: update cisd_data 0 7 1 3000 3000 0 0 0 0 0 0 0 0 0 0 0 267 222 339 236 0 0 0 0 -300 1000 -300 1000 -300 1000 -300 1000 0 0 0 0 0 0 0 0 0 0 1 3000 3000 0 0 1 0 0 0 0 0 0 0 265 236 294 263 0 0 0 0 -300 1000 -300 1000 -300 1000 -300 1000 0 0 0 0 0 0 0 0 0 0 |
| [ 5.083444] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 5.091288] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3874) |
| [ 5.091956] [7: healthd: 2871] healthd: battery l=56 v=3874 t=26.0 h=2 st=2 c=0 o=19 ca=-187 ct=0 ps=0 hv=0 sec=0 sec=4 chg=a |
| [ 5.091976] [7: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : start |
| [ 5.091987] [7: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : done |
| [ 5.092045] [0: kworker/u16:2: 241] sec_bat_store_attrs: PMS sevice hiccup read done : 0 |
| [ 5.092773] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf25d) |
| [ 5.092877] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (852)mA |
| [ 5.096234] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf988), avg current (404)mA |
| [ 5.096252] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 5.097667] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 5.098391] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 5.102895] [1: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_temperature: temperature (288) |
| [ 5.105007] [1: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 5.107171] [4: init: 1] init: Starting service 'at_distributor'... |
| [ 5.107693] [1: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (58) data1 (36) |
| [ 5.129505] [4: init: 1] init: Service 'macloader' (pid 2981) exited with status 0 |
| [ 5.149971] [1: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (14) data1 (9) |
| [ 5.149990] [1: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5659) |
| [ 5.150004] [1: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5660), previous soc (5660), diff (0), FG_mode(0) |
| [ 5.154058] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf988), avg current (404)mA |
| [ 5.154077] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 5.154955] [6:sensorhubservic: 2975] !@check sensor_device, nodeNumber: 5, deviceName: ssp_context |
| [ 5.154955] [6:sensorhubservic: 2975] |
| [ 5.154989] [6:sensorhubservic: 2975] !@check sensor_device, matched ssp_context |
| [ 5.158882] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmd4_spi_boot: ---------> firmware loaded |
| [ 5.161065] [7:dbmdx probe thr: 1902] dbmd_4_6-spi spi2.0: spi_set_speed Update SPI Max Speed to 960000 Hz, bpw: 8, mode: 0 |
| [ 5.171645] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_active_interface: switched to interface#: 0 |
| [ 5.171660] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_config_va_mode |
| [ 5.171726] [7:dbmdx probe thr: 1902] [CAL]cal_vclk_set_rate failed 184549391 1920000 -22. |
| [ 5.204138] [4: init: 1] init: Service 'epmlogd' (pid 2982) exited with status 0 |
| [ 5.211778] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3867) |
| [ 5.211875] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56 |
| [ 5.234032] [4: init: 1] init: Starting service 'bootanim'... |
| [ 5.234049] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3874) |
| [ 5.234060] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_wakeup_set: 0==>gpio121 |
| [ 5.242635] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (248) data1 (123) |
| [ 5.243341] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3874), src (0x01) |
| [ 5.244748] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf683) |
| [ 5.244768] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (593)mA |
| [ 5.244780] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 5.251571] [4: init: 1] init: Starting service 'powersnd'... |
| [ 5.268954] [0: surfaceflinger: 2877] decon_notifier_event: 10 |
| [ 5.268974] [0: surfaceflinger: 2877] lcd panel: fb_notifier_callback: 10, 0 |
| [ 5.268984] [0: surfaceflinger: 2877] decon: decon_blank + blank_mode: 0, decon-0 UNBLANK mode: 0type (0: DSI, 1: eDP, 2:DP, 3: WB) |
| [ 5.268997] [0: surfaceflinger: 2877] decon: decon0 init state |
| [ 5.269003] [0: surfaceflinger: 2877] decon: skipped to enable decon |
| [ 5.269011] [0: surfaceflinger: 2877] decon: decon_blank - blank_mode: 0, -16 |
| [ 5.275704] [0: kworker/u16:2: 241] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0xf8, 0x05:0x7b, 0x06:0x83, 0x07:0xf6, 0x08:0x3d, 0x09:0x24, 0x0a:0xe6, 0x0b:0x1c, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 5.275740] [0: kworker/u16:2: 241] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 5.275770] [0: kworker/u16:2: 241] sec-battery battery: sec_bat_get_battery_info:Vnow(3874mV),Inow(852mA),Imax(1500mA),Ichg(1724mA),SOC(56%),Tbat(268), Tusb(0), Tchg(288),Twpc(0) |
| [ 5.277852] [0: kworker/u16:2: 241] sec-battery battery: sec_bat_cisd_check: [CISD] iavg: 404, incur: 1500, chgcur: 1700, |
| [ 5.277852] [0: kworker/u16:2: 241] cc_T: 0, lcd_off_T: 0, passed_T: 0, full_T: 0, chg_end_T: 0, cisd: 0x0 |
| [ 5.281909] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[13] |
| [ 5.284560] [0: kworker/u16:2: 241] [DEBUG] s2mu004_get_charging_health: S2MU004_CHG_STATUS0 0x63 |
| [ 5.287641] [7:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_backlog_len: history 0x514 |
| [ 5.289211] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_backlog_len: FW Audio buffer size was verified FW buffer size: 98304 bytes (6144 smp. chunks) Min req. buffer size: 0 bytes (0 smp. chunks) |
| [ 5.291586] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_pcm_rate: set pcm rate: 16000 |
| [ 5.293963] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_update_microphone_mode: mode: 0 |
| [ 5.298089] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_read_fw_vad_settings: FW Vad is set to 0x00000000 |
| [ 5.299647] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_verify_model_support: OKG FW Support was verified |
| [ 5.299666] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_verify_model_support: SVT FW Support was verified |
| [ 5.302092] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_pcm_streaming_mode: PCM Streaming mode: 1, Reg 0x23: (0x00001001) |
| [ 5.302113] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_config_va_mode: VA firmware 0x1384 ready |
| [ 5.302125] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_mode: new requested mode: 0 (IDLE) |
| [ 5.311359] [4: iptables: 3029] !@iptables_log: command error exit (2) |
| [ 5.311673] [4: iptables: 3029] !@iptables_log: 20170128-12:26:37 [3002,3029] /system/bin/iptables -w -w -t filter |
| [ 5.311673] [4: iptables: 3029] |
| [ 5.313850] [0: kworker/u16:2: 241] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x43, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 5.313882] [0: kworker/u16:2: 241] sec-battery battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0) |
| [ 5.313900] [0: kworker/u16:2: 241] sec-battery battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(PDIC, PDIC, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(PDIC), sleep_mode(0), Cycle(-1) |
| [ 5.313924] [0: kworker/u16:2: 241] sec-battery battery: sec_bat_set_polling: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes |
| [ 5.313936] [0: kworker/u16:2: 241] sec-battery battery: sec_bat_set_polling: Polling time 20/30 sec. |
| [ 5.314716] [0: kworker/0:2: 2018] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 5.317570] [5: healthd: 2871] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 5.320236] [0: healthd: 2871] healthd: update cisd_data 0 7 1 3000 3000 0 0 0 0 0 0 0 0 0 0 0 268 222 339 236 0 0 0 0 268 268 288 288 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 3000 3000 0 0 1 0 0 0 0 0 0 0 268 236 294 263 0 0 0 0 268 1000 288 288 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| [ 5.320588] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_update_microphone_mode: mode: 5 |
| [ 5.322306] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_disable_microphones: Microphones were (disabled) |
| [ 5.322341] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move BOOTING -> FALLING_ASLEEP (00 -> 02) |
| [ 5.322360] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved BOOTING -> FALLING_ASLEEP (00 -> 02) |
| [ 5.322373] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_mode: Successfull mode transition from 0 to mode is 0 |
| [ 5.322387] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move FALLING_ASLEEP -> ACTIVE (02 -> 01) |
| [ 5.322402] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved FALLING_ASLEEP -> ACTIVE (02 -> 01) |
| [ 5.322414] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.322428] [4:dbmdx probe thr: 1902] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.322957] [3: sdp_cryptod: 2983] SDP_PUB_CRYPTO[2983] : pub_crypto_recv_msg crypto_receive_msg: pid = 2983 |
| [ 5.326708] [0: healthd: 2871] healthd: battery l=56 v=3874 t=26.8 h=2 st=2 c=0 o=19 ca=404 ct=0 ps=0 hv=0 sec=0 sec=4 chg=a |
| [ 5.326736] [0: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : start |
| [ 5.326753] [0: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : done |
| [ 5.326826] [7: ip6tables: 3034] sec_bat_store_attrs: PMS sevice hiccup read done : 0 |
| [ 5.356650] [7: ip6tables: 3034] !@iptables_log: command error exit (2) |
| [ 5.356746] [7: ip6tables: 3034] !@iptables_log: 20170128-12:26:37 [3002,3034] /system/bin/ip6tables -w -w -t filter |
| [ 5.356746] [7: ip6tables: 3034] |
| [ 5.382167] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[14] |
| [ 5.482461] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[15] |
| [ 5.492460] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[16] |
| [ 5.502487] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[17] |
| [ 5.512522] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[18] |
| [ 5.519668] [4: kworker/4:1: 1964] dbmdx-codec dbmdx: dbmdx_delayed_pm_work_hibernate |
| [ 5.519691] [4: kworker/4:1: 1964] dbmdx-codec dbmdx: dbmdx_wakeup_release: 1==>gpio121 |
| [ 5.519715] [4: kworker/4:1: 1964] dbmdx-codec dbmdx: dbmdx_set_mode: new requested mode: 6 (HIBERNATE) |
| [ 5.522548] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[19] |
| [ 5.532564] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_dump_register_buffer_work_func[20] |
| [ 5.535649] [4: kworker/4:1: 1964] dbmdx-codec dbmdx: dbmdx_set_mode: Successfull mode transition from 0 to mode is 6 |
| [ 5.549016] [4: init: 1] init: Starting service 'ril-daemon1'... |
| [ 5.559689] [4: kworker/4:1: 1964] dbmdx-codec dbmdx: dbmdx_wakeup_release: 1==>gpio121 |
| [ 5.559722] [4: kworker/4:1: 1964] dbmdx-codec dbmdx: dbmdx_delayed_pm_work_hibernate: current power mode: SLEEPING |
| [ 5.563153] [1: kworker/1:2: 2019] Trustonic TEE: c01|[skeymast:SCrypto] <INFO> SCrypto 2.1 is in FIPS approved mode |
| [ 5.563175] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:82) Start MDFPP keymaster version 1.8.6.1 SCrypto v2.1 |
| [ 5.563190] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:85) Mobicore version : t-base-EXYNOS64-Android-400A-V012-20170726_155303_34988_66846 |
| [ 5.563204] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_main.c:86) API version : 0x10014 |
| [ 5.563219] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:119) =CASE TZ_TA_KM_GET_SUP_DIGEST= |
| [ 5.563233] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 5.571993] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:119) =CASE TZ_TA_KM_GET_SUP_DIGEST= |
| [ 5.572016] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 5.572554] [0: kworker/0:2: 2018] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:119) =CASE TZ_TA_KM_GET_SUP_DIGEST= |
| [ 5.572583] [0: kworker/0:2: 2018] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 5.575972] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:119) =CASE TZ_TA_KM_GET_SUP_DIGEST= |
| [ 5.575993] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 5.576496] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:119) =CASE TZ_TA_KM_GET_SUP_DIGEST= |
| [ 5.576517] [1: kworker/1:2: 2019] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 5.577023] [4: kworker/4:1: 1964] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:119) =CASE TZ_TA_KM_GET_SUP_DIGEST= |
| [ 5.577044] [4: kworker/4:1: 1964] Trustonic TEE: c01|TRUST_KEYMASTER[I] (tz_ta_keymaster_service.c:299) = END: 0 = |
| [ 5.726113] [0: cbd: 2979] mif: cbd: start_shannon310_boot: NV validation done |
| [ 5.726440] [0: cbd: 2979] mif: cbd: boot_wake_lock: /sys/power/wake_lock/ss310 |
| [ 5.726655] [0: cbd: 2979] mif: misc_open: umts_boot0 (opened 1) by cbd |
| [ 5.726692] [0: cbd: 2979] mif: cbd: std_boot_prepare_args: DEV(/dev/umts_boot0) opened (fd 6) |
| [ 5.726875] [0: cbd: 2979] mif: cbd: prepare_boot_args: BIN(/dev/block/platform/13500000.dwmmc0/by-name/RADIO) opened (fd 7) |
| [ 5.731536] [0: cbd: 2979] mif: cbd: prepare_boot_args: toc[0].name = TOC, b_off=0, m_off=0, size=512 |
| [ 5.731569] [0: cbd: 2979] mif: cbd: prepare_boot_args: toc[1].name = BOOT, b_off=512, m_off=1073741824, size=5492 |
| [ 5.731634] [0: cbd: 2979] mif: cbd: prepare_boot_args: toc[2].name = MAIN, b_off=6016, m_off=1073807360, size=36598972 |
| [ 5.731654] [0: cbd: 2979] mif: cbd: prepare_boot_args: toc[3].name = VSS, b_off=36604992, m_off=1200619520, size=2229972 |
| [ 5.731673] [0: cbd: 2979] mif: cbd: prepare_boot_args: toc[4].name = NV, b_off=0, m_off=1194328064, size=1048576 |
| [ 5.731855] [0: cbd: 2979] mif: cbd: prepare_boot_args: NV(/efs/nv_data.bin) opened (fd 8) |
| [ 5.731878] [0: cbd: 2979] mif: cbd: build_std_dload_control: stage=0, name:BOOT b_off=512, m_offset=0 b_size=5492 |
| [ 5.731897] [0: cbd: 2979] mif: cbd: build_std_dload_control: stage=1, name:MAIN b_off=6016, m_offset=65536 b_size=36598972 |
| [ 5.731916] [0: cbd: 2979] mif: cbd: build_std_dload_control: stage=2, name:VSS b_off=36604992, m_offset=126877696 b_size=2229972 |
| [ 5.731935] [0: cbd: 2979] mif: cbd: build_std_dload_control: stage=3, name:NV b_off=0, m_offset=120586240 b_size=1048576 |
| [ 5.735704] [0: cbd: 2979] mif: shmem_ioctl: shmem: cmd 0x00006F45 |
| [ 5.735724] [0: cbd: 2979] mif: shmem_ioctl: get srinfo:umts_boot0, size = 4092 |
| [ 5.735867] [0: cbd: 2979] mif: cbd: get_modem_state: modem_status: 0 |
| [ 5.736013] [0: cbd: 2979] mif: cbd: std_security_req: orig cpu_set[0]=0x000000ff |
| [ 5.736647] [4: cbd: 2979] mif: cbd: std_security_req: new cpu_set[0]=0x000000fe |
| [ 5.736678] [4: cbd: 2979] mif: misc_ioctl: umts_boot0: IOCTL_SECURITY_REQUEST |
| [ 5.736691] [4: cbd: 2979] mif: shmem_security_request: mode=2, size=0x0, addr=0x0, cp_base_addr=0xf5400000 |
| [ 5.736727] [4: cbd: 2979] mif: shmem_security_request: shmem: return_value=0x0000000b(CP_NOT_WORKING) |
| [ 5.736747] [4: cbd: 2979] mif: cbd: std_security_req: ERR! IOCTL_CHECK_SECURITY fail (No such file or directory) |
| [ 5.736777] [4: cbd: 2979] mif: cbd: std_security_req: restore cpu_set[0]=0x000000ff |
| [ 5.736900] [4: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: stage=0(0), b_off=512, m_off=0, b_size=5492, mode=0 |
| [ 5.737022] [4: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: 0 stage complelte |
| [ 5.737048] [4: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: stage=1(1), b_off=6016, m_off=65536, b_size=36598972, mode=0 |
| [ 5.792987] [5: iptables: 3078] !@iptables_log: command error exit (2) |
| [ 5.793203] [5: iptables: 3078] !@iptables_log: 20170128-12:26:37 [3002,3078] /system/bin/iptables -w -w -t filter |
| [ 5.793203] [5: iptables: 3078] |
| [ 5.811222] [0: ip6tables: 3082] !@iptables_log: command error exit (2) |
| [ 5.811450] [0: ip6tables: 3082] !@iptables_log: 20170128-12:26:37 [3002,3082] /system/bin/ip6tables -w -w -t filter |
| [ 5.811450] [0: ip6tables: 3082] |
| [ 5.840887] [1: rild: 3047] mif: store_waketime: multipdp: (0) is not valied, use previous value(500) |
| [ 5.924674] [6: rild: 3047] mif: misc_open: umts_boot0 (opened 2) by rild |
| [ 5.933656] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move SLEEPING -> ACTIVE (03 -> 01) |
| [ 5.933678] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_wakeup_set: 0==>gpio121 |
| [ 5.933705] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_wakeup_set: 0==>gpio121 |
| [ 5.961731] [1: Binder:2996_1: 3040] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 5.962861] [1: Binder:2996_1: 3040] s5p_mfc_alloc_firmware:632: Normal F/W daddr: 0x10000000 vaddr: 0xffffff8012479000 |
| [ 5.970837] [0: kworker/0:2: 2018] [SECLOG C1] [000010.845895] DRMFW:MFCFW is delayed protection |
| [ 5.970879] [1: Binder:2996_1: 3040] s5p_mfc_alloc_firmware:672: Secure F/W daddr: 0x80000000 vaddr: 0xffffff8012586000 |
| [ 5.980407] [1: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 5.980886] [1: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 5.981196] [1: Binder:2996_1: 3040] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8749ef000, version = 170607 |
| [ 5.981402] [1: Binder:2996_1: 3040] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 5.981460] [1: Binder:2996_1: 3040] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 5.981921] [1: Binder:2996_1: 3040] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 5.990859] [1: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_force_wake: woke up |
| [ 5.990882] [1: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved ACTIVE -> ACTIVE (01 -> 01) |
| [ 5.992638] [1: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.992666] [1: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.992741] [1: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move FALLING_ASLEEP -> ACTIVE (02 -> 01) |
| [ 5.992762] [1: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved FALLING_ASLEEP -> ACTIVE (02 -> 01) |
| [ 5.994370] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.994395] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.994529] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move FALLING_ASLEEP -> ACTIVE (02 -> 01) |
| [ 5.994550] [0: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved FALLING_ASLEEP -> ACTIVE (02 -> 01) |
| [ 5.996163] [6: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: would move ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 5.996179] [6: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_power_mode: has moved ACTIVE -> FALLING_ASLEEP (01 -> 02) |
| [ 6.002814] [2: Binder:2996_2: 3112] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.012627] [6: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.013028] [6: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.013232] [6: Binder:2996_2: 3112] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc874d36000, version = 170607 |
| [ 6.013364] [6: Binder:2996_2: 3112] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.014783] [6: Binder:2996_2: 3112] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.015184] [6: Binder:2996_2: 3112] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.018953] [3: iptables: 3119] !@iptables_log: command error exit (2) |
| [ 6.019196] [3: iptables: 3119] !@iptables_log: 20170128-12:26:37 [3002,3119] /system/bin/iptables -w -w -t filter |
| [ 6.019196] [3: iptables: 3119] |
| [ 6.022985] [6: audioserver: 2984] samsung-abox 14a50000.abox: abox_sound_type_put(128) |
| [ 6.023010] [6: audioserver: 2984] cod3035x 4-0003: avc_bypass_mode_put: avc bypass mode : on |
| [ 6.023020] [6: audioserver: 2984] cod3035x 4-0003: avc_mute_put: avc mute enable : on |
| [ 6.023029] [6: audioserver: 2984] cod3035x 4-0003: mcb2_chop_mode_put: mcb2 chop mode : on |
| [ 6.041067] [2: ip6tables: 3125] !@iptables_log: command error exit (2) |
| [ 6.041315] [2: ip6tables: 3125] !@iptables_log: 20170128-12:26:37 [3002,3125] /system/bin/ip6tables -w -w -t filter |
| [ 6.041315] [2: ip6tables: 3125] |
| [ 6.055881] [0: rild: 3087] mif: store_waketime: multipdp: (0) is not valied, use previous value(500) |
| [ 6.056030] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.064939] [3: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.065408] [3: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.065764] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8747c1000, version = 170607 |
| [ 6.065936] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.065991] [3: Binder:2996_2: 3112] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.066440] [3: Binder:2996_2: 3112] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.079548] [5: init: 1] init: Service 'prepare_param' (pid 2873) exited with status 0 |
| [ 6.090669] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.097844] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 0 0 0 |
| [ 6.100087] [3: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.100500] [3: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.100785] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8747c5000, version = 170607 |
| [ 6.100928] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.100977] [3: Binder:2996_2: 3112] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.101416] [3: Binder:2996_2: 3112] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.110446] [6: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: 1 stage complelte |
| [ 6.110471] [6: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: stage=2(2), b_off=36604992, m_off=126877696, b_size=2229972, mode=0 |
| [ 6.122980] [6: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: 2 stage complelte |
| [ 6.123004] [6: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: stage=3(3), b_off=0, m_off=120586240, b_size=1048576, mode=0 |
| [ 6.123502] [6: cbd: 2979] mif: cbd: shannon310_boot_xmit_bin: 3 stage complelte |
| [ 6.126437] [6: cbd: 2979] mif: cbd: std_security_req: orig cpu_set[0]=0x000000ff |
| [ 6.126463] [6: cbd: 2979] mif: cbd: std_security_req: new cpu_set[0]=0x000000fe |
| [ 6.126473] [6: cbd: 2979] mif: misc_ioctl: umts_boot0: IOCTL_SECURITY_REQUEST |
| [ 6.126480] [6: cbd: 2979] mif: shmem_security_request: mode=0, size=0x1574, addr=0x22e74bc, cp_base_addr=0xf5400000 |
| [ 6.127928] [0: rild: 3087] mif: misc_open: umts_boot0 (opened 3) by rild |
| [ 6.150497] [2: Binder:2996_1: 3040] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.162483] [2: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.162884] [3: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.163267] [3: Binder:2996_1: 3040] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc874d35000, version = 170607 |
| [ 6.163406] [3: Binder:2996_1: 3040] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.163456] [3: Binder:2996_1: 3040] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.164046] [3: Binder:2996_1: 3040] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.164067] [2: BootAnimation: 3152] !@BootAnimation : Could not open '/sys/class/lcd/panel/ux_color' |
| [ 6.164385] [2: BootAnimation: 3152] !@BootAnimation : WindowColor = BLACK(81 ) |
| [ 6.164883] [2: BootAnimation: 3152] !@BootAnimation : mps_code = XSG |
| [ 6.164945] [2: BootAnimation: 3152] !@BootAnimation : [Chameleon] Carrier animation is not supported... |
| [ 6.165025] [2: BootAnimation: 3152] !@BootAnimation : Could not open '/sys/bus/w1/devices/w1_bus_master1/w1_master_check_model' |
| [ 6.167846] [0: BootAnimation: 3152] !@BootAnimation : Load sequence resource = /system/media/bootsamsung.qmg |
| [ 6.168225] [0: BootAnimation: 3152] !@BootAnimation : Load loop resource = /system/media/bootsamsungloop.qmg |
| [ 6.168528] [0: BootAnimation: 3152] !@BootAnimation : [Encryption info]crypt_state = encrypted, crypt_input_window = 0, crypt_type = default |
| [ 6.169308] [5: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_va_amodel_update:Det.mode: 0 Selected: 0x0 Options: 0x0 Params 0x0 |
| [ 6.169331] [5: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_mode: new requested mode: 0 (IDLE) |
| [ 6.184843] [1: mediacodec: 2996] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.187834] [5: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_mode: Successfull mode transition from 0 to mode is 0 |
| [ 6.189019] [5: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_sv_recognition_mode: SV amodel mode was set to 0 |
| [ 6.190561] [5: audioserver: 2984] dbmdx-codec dbmdx: dbmdx_set_okg_recognition_mode: OKG amodel enabled: No |
| [ 6.194800] [2: mediacodec: 2996] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.195254] [1: mediacodec: 2996] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.195554] [1: mediacodec: 2996] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8749ea000, version = 170607 |
| [ 6.195750] [1: mediacodec: 2996] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.195807] [1: mediacodec: 2996] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.196241] [1: mediacodec: 2996] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.213486] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.222231] [3: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.222635] [3: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.222923] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8747c1000, version = 170607 |
| [ 6.223086] [3: Binder:2996_2: 3112] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.223141] [3: Binder:2996_2: 3112] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.223622] [3: Binder:2996_2: 3112] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.239028] [3: Binder:2996_1: 3040] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.248025] [3: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.248468] [3: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.248730] [3: Binder:2996_1: 3040] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8747c7000, version = 170607 |
| [ 6.248886] [3: Binder:2996_1: 3040] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.248936] [3: Binder:2996_1: 3040] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.249372] [3: Binder:2996_1: 3040] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.258234] [5: iptables: 3166] !@iptables_log: command error exit (2) |
| [ 6.258482] [5: iptables: 3166] !@iptables_log: 20170128-12:26:38 [3002,3166] /system/bin/iptables -w -w -t filter |
| [ 6.258482] [5: iptables: 3166] |
| [ 6.260380] [1: Binder:2996_1: 3040] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.269280] [1: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.269724] [1: Binder:2996_1: 3040] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.270040] [1: Binder:2996_1: 3040] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8749e8000, version = 170607 |
| [ 6.270207] [1: Binder:2996_1: 3040] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.270263] [1: Binder:2996_1: 3040] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.270690] [1: Binder:2996_1: 3040] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.278524] [3: ip6tables: 3169] !@iptables_log: command error exit (2) |
| [ 6.278726] [3: ip6tables: 3169] !@iptables_log: 20170128-12:26:38 [3002,3169] /system/bin/ip6tables -w -w -t filter |
| [ 6.278726] [3: ip6tables: 3169] |
| [ 6.295774] [6: kworker/6:5: 1958] dbmdx-codec dbmdx: dbmdx_delayed_pm_work_hibernate |
| [ 6.295789] [6: kworker/6:5: 1958] dbmdx-codec dbmdx: dbmdx_wakeup_release: 1==>gpio121 |
| [ 6.295803] [6: kworker/6:5: 1958] dbmdx-codec dbmdx: dbmdx_set_mode: new requested mode: 6 (HIBERNATE) |
| [ 6.296039] [6: cbd: 2979] mif: shmem_security_request: shmem: return_value=0x00000000(CP_NO_ERROR) |
| [ 6.296134] [6: cbd: 2979] mif: cbd: std_security_req: restore cpu_set[0]=0x000000ff |
| [ 6.296218] [6: cbd: 2979] mif: misc_ioctl: umts_boot0: IOCTL_MODEM_ON |
| [ 6.296227] [6: cbd: 2979] mif: ss310ap_on: +++ |
| [ 6.296232] [6: cbd: 2979] mif: ss310ap_on: cp_active:0 cp_status:0 |
| [ 6.296239] [6: cbd: 2979] exynos-snapshot: item - log_kevents is enabled |
| [ 6.296259] [6: cbd: 2979] mif: get_ds_detect: Dual SIM detect = 2 |
| [ 6.296266] [6: cbd: 2979] mif: init_mailbox_regs: sys_rev:7, ds_det:1 (0x41c0) |
| [ 6.296275] [6: cbd: 2979] PMUCAL: pmucal_cp_status() |
| [ 6.296284] [6: cbd: 2979] PMUCAL: raw_read RESET_SEQUENCER_STATUS = 0x00000000 |
| [ 6.296289] [6: cbd: 2979] mif: ss310ap_on: CP first Init! |
| [ 6.296311] [6: cbd: 2979] exynos_pmu_shared_reg_enable) need_delay = 1, usage_cnt = 1, CP_WAKEUP = 1, CP_STAT = 0x01, EXT_REGULATOR_SHARED_STATUS: 0x00090000, CALLER = ss310ap_on |
| [ 6.296317] [6: cbd: 2979] PMUCAL: pmucal_cp_init() |
| [ 6.296331] [6: cbd: 2979] PMUCAL: smc_write CP_CTRL_NS__CP_PWRON = 0x000046aa |
| [ 6.296340] [6: cbd: 2979] PMUCAL: smc_read CP_CTRL_NS__CP_PWRON = 0x000046aa |
| [ 6.296351] [6: cbd: 2979] PMUCAL: smc_write CP_CTRL_S__CP_START = 0x00000008 |
| [ 6.296359] [6: cbd: 2979] PMUCAL: smc_read CP_CTRL_S__CP_START = 0x00000008 |
| [ 6.297791] [5: BootAnimation: 3152] !@BootAnimation : createSurface RGB565 |
| [ 6.297982] [6: cbd: 2979] PMUCAL: raw_read RESET_SEQUENCER_STATUS = 0x00000005(expected = 0x00000005) |
| [ 6.297995] [6: cbd: 2979] mif: io_dev_modem_state_changed: s327ap->state changed (OFFLINE -> BOOTING) |
| [ 6.315004] [6: kworker/6:5: 1958] dbmdx-codec dbmdx: dbmdx_set_mode: Successfull mode transition from 0 to mode is 6 |
| [ 6.317417] [6: BootAnimation: 3152] !@BootAnimation : Could not open '/sys/devices/w1_bus_master1/w1_master_verify_mac' |
| [ 6.317458] [6: BootAnimation: 3152] !@BootAnimation : Could not open '/sys/devices/w1_bus_master1/w1_master_check_id' |
| [ 6.317477] [6: BootAnimation: 3152] !@BootAnimation : BootAnimData_STATUS = 0x3 |
| [ 6.318508] [6: BootAnimation: 3152] [LED] store_s2mu004_rgb_pattern : 6 lp : 0 |
| [ 6.325303] [6: BootAnimation: 3152] [LED] LED[1] 0x10 |
| [ 6.325314] [6: BootAnimation: 3152] [LED] LED[2] 45 |
| [ 6.327538] [6: BootAnimation: 3152] [LED] LED[1] 7 |
| [ 6.333364] [6: BootAnimation: 3152] !@BootAnimation : draw Start |
| [ 6.335665] [6: kworker/6:5: 1958] dbmdx-codec dbmdx: dbmdx_wakeup_release: 1==>gpio121 |
| [ 6.335686] [6: kworker/6:5: 1958] dbmdx-codec dbmdx: dbmdx_delayed_pm_work_hibernate: current power mode: SLEEPING |
| [ 6.392163] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_startup[3:P] |
| [ 6.392185] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_control_bclk_polarity(UAIF3, 1) |
| [ 6.392212] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445ac00, 3) |
| [ 6.392272] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 6.392412] [5: AudioOut_D: 3131] tfa98xx_startup(): tfa98xx_startup: add all the rates in the list |
| [ 6.392463] [5: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_request_cpu_gear(ffffffc07f516810, 3) |
| [ 6.392682] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_hw_params_fixup_helper: 16 bit, 2 channel, 48000Hz |
| [ 6.392707] [5: AudioOut_D: 3131] tfa98xx_hw_params(): forced to change rate: 48000 to 48000 |
| [ 6.392721] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_hw_params[3:P] |
| [ 6.392757] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: audif clock: 24576000 |
| [ 6.392786] [5: AudioOut_D: 3131] samsung-abox 14a50000.abox: rate=48000, width=16, channel=2, bclk=1536000 |
| [ 6.392832] [5: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_rdma_hw_params: hal samplerate=48000 |
| [ 6.392867] [5: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_request_lit_freq(ffffffc07f516810, 0) |
| [ 6.392881] [5: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_request_big_freq(ffffffc07f516810, 0) |
| [ 6.392894] [5: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_request_hmp_boost(ffffffc07f516810, 0) |
| [ 6.392910] [5: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: Playback:DmaAddr=0x00000008fd230000 Total=1536 PrdSz=192(768) #Prds=2 dma_area=ffffff800e1b1000 rate=48000, width=16, channels=2 |
| [ 6.393302] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 6.393397] [2: AudioOut_D: 3131] _tfa98xx_mute(): mute:0 [pstream 1, cstream 0, samstream 0] |
| [ 6.393413] [2: AudioOut_D: 3131] _tfa98xx_mute(): unmute is triggered |
| [ 6.393419] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request little: 1586000kHz |
| [ 6.393433] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request big: 2184000kHz |
| [ 6.393444] [2: AudioOut_D: 3131] _tfa98xx_mute(): _tfa98xx_mute: start tfa amp |
| [ 6.393485] [4: kworker/u16:0: 6] tfa98xx_dsp_init(): tfa98xx_dsp_init: ... |
| [ 6.393499] [4: kworker/u16:0: 6] tfa_start: tfa98xx_log_start_cnt=1 |
| [ 6.394294] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[3:P] trigger=1 |
| [ 6.394337] [2: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_rdma_trigger[7](1) |
| [ 6.394657] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_startup[1:C] |
| [ 6.394675] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_control_bclk_polarity(UAIF1, 1) |
| [ 6.394706] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445ae00, 3) |
| [ 6.394778] [2: kworker/2:1: 1963] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 6.394941] [4: AudioOut_D: 3131] samsung-abox-wdma 14a52300.abox_wdma: abox_request_cpu_gear(ffffffc07f515c10, 3) |
| [ 6.395236] [4: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_hw_params_fixup_helper: 16 bit, 2 channel, 48000Hz |
| [ 6.395293] [4: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_hw_params[1:C] |
| [ 6.395340] [4: AudioOut_D: 3131] samsung-abox 14a50000.abox: audif clock: 24576000 |
| [ 6.395354] [4: AudioOut_D: 3131] samsung-abox 14a50000.abox: rate=48000, width=16, channel=2, bclk=0 |
| [ 6.395446] [4: AudioOut_D: 3131] samsung-abox-wdma 14a52300.abox_wdma: abox_wdma_hw_params: hal samplerate=48000 |
| [ 6.395554] [4: AudioOut_D: 3131] samsung-abox-wdma 14a52300.abox_wdma: Capture:DmaAddr=0x00000008fe000000 Total=15360 PrdSz=960(3840) #Prds=4 dma_area=ffffff800e1f1000 rate=48000, width=16, channels=2 |
| [ 6.396095] [4: kworker/4:1: 1964] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 6.396806] [4: kworker/u16:0: 6] tfa_run_speaker_boost: cold boot, ext_dsp = 1, profile = 0 |
| [ 6.396827] [4: kworker/u16:0: 6] tfa_run_speaker_boost: cold start, speaker startup |
| [ 6.397314] [0: AudioOut_D: 3131] samsung-abox-wdma 14a52300.abox_wdma: abox_wdma_trigger[3](1) |
| [ 6.397435] [0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[1:C] trigger=1 |
| [ 6.397552] I[0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007008, 2) |
| [ 6.397603] I[0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_mif_freq(676000) |
| [ 6.397947] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.398064] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_change_mif_freq_work_func(676000) |
| [ 6.398310] [0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_startup[3:C] |
| [ 6.398334] [0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445ac00, 3) |
| [ 6.398377] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.398500] [1: AudioOut_D: 3131] tfa98xx_startup(): tfa98xx_startup: add all the rates in the list |
| [ 6.398523] [1: AudioOut_D: 3131] samsung-abox-wdma 14a52400.abox_wdma: abox_request_cpu_gear(ffffffc07f516410, 3) |
| [ 6.398727] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_hw_params_fixup_helper: 16 bit, 2 channel, 48000Hz |
| [ 6.398744] [1: AudioOut_D: 3131] tfa98xx_hw_params(): forced to change rate: 48000 to 48000 |
| [ 6.398757] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_hw_params[3:C] |
| [ 6.398794] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: audif clock: 24576000 |
| [ 6.398820] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: rate=48000, width=16, channel=2, bclk=1536000 |
| [ 6.398891] [1: AudioOut_D: 3131] samsung-abox-wdma 14a52400.abox_wdma: abox_wdma_hw_params: hal samplerate=48000 |
| [ 6.398955] [1: AudioOut_D: 3131] samsung-abox-wdma 14a52400.abox_wdma: Capture:DmaAddr=0x00000008fe008000 Total=15360 PrdSz=960(3840) #Prds=4 dma_area=ffffff800e211000 rate=48000, width=16, channels=2 |
| [ 6.399336] [1: kworker/1:2: 2019] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.399527] [1: AudioOut_D: 3131] _tfa98xx_mute(): mute:0 [pstream 1, cstream 1, samstream 0] |
| [ 6.400507] [2: AudioOut_D: 3131] samsung-abox-wdma 14a52400.abox_wdma: abox_wdma_trigger[4](1) |
| [ 6.400585] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[3:C] trigger=1 |
| [ 6.400784] [2: AudioOut_D: 3131] cod3035x 4-0003: (*) cod3035x_runtime_resume |
| [ 6.400801] [2: AudioOut_D: 3131] cod3035x 4-0003: (*) cod3035x_enable |
| [ 6.400821] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_enable_mclk: ABOX_UAIF_CTRL0(ABOX_UAIF2)=00000002 |
| [ 6.400834] [2: AudioOut_D: 3131] cod3035x 4-0003: cod3035x_regulators_enable regulator: 1 |
| [ 6.425644] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:0 data:9A |
| [ 6.426254] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 6.428085] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 6.428611] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_startup[0:P] |
| [ 6.428635] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_control_bclk_polarity(UAIF0, 1) |
| [ 6.428659] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445af00, 3) |
| [ 6.428714] [2: kworker/2:1: 1963] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.428838] [1: AudioOut_D: 3131] cod3035x 4-0003: (P) cod3035x_dai_startup completed |
| [ 6.428862] [1: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_request_cpu_gear(ffffffc870da2010, 3) |
| [ 6.429092] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_hw_params_fixup_helper: 16 bit, 2 channel, 48000Hz |
| [ 6.429137] [1: AudioOut_D: 3131] cod3035x 4-0003: cod3035x_dai_hw_params called. cur_aifrate: 48000 |
| [ 6.429151] [1: AudioOut_D: 3131] cod3035x 4-0003: cod3035x_dai_hw_params called. width: 16 |
| [ 6.429263] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_hw_params[0:P] |
| [ 6.429308] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: audif clock: 24576000 |
| [ 6.429337] [1: AudioOut_D: 3131] samsung-abox 14a50000.abox: rate=48000, width=16, channel=2, bclk=1536000 |
| [ 6.429389] [1: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_rdma_hw_params: hal samplerate=48000 |
| [ 6.429429] [1: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_request_lit_freq(ffffffc870da2010, 0) |
| [ 6.429448] [1: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_request_big_freq(ffffffc870da2010, 0) |
| [ 6.429462] [1: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_request_hmp_boost(ffffffc870da2010, 0) |
| [ 6.429479] [1: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: Playback:DmaAddr=0x00000008fdf00000 Total=15360 PrdSz=960(3840) #Prds=4 dma_area=ffffff800e391000 rate=48000, width=16, channels=2 |
| [ 6.429898] [1: kworker/1:2: 2019] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.430011] [1: kworker/1:2: 2019] samsung-abox 14a50000.abox: pm qos request little: 1586000kHz |
| [ 6.430028] [1: kworker/1:2: 2019] samsung-abox 14a50000.abox: pm qos request big: 2184000kHz |
| [ 6.430130] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_flush_mixp: flush |
| [ 6.430688] [2: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[0:P] trigger=1 |
| [ 6.430717] [2: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_rdma_trigger[0](1) |
| [ 6.435414] [3: iptables: 3196] !@iptables_log: command error exit (2) |
| [ 6.435807] [3: iptables: 3196] !@iptables_log: 20170128-12:26:38 [3002,3196] /system/bin/iptables -w -w -t filter |
| [ 6.435807] [3: iptables: 3196] |
| [ 6.447244] [0: init: 1] init: Service 'flash_recovery' (pid 2972) exited with status 0 |
| [ 6.449139] [7: Binder:2996_3: 3138] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.461214] [5: kworker/u16:0: 6] tfa_cont_write_vstepMax2_One: is_cold 1 |
| [ 6.461290] [5: kworker/u16:0: 6] tfa_cont_write_vstepMax2_One: is_cold 1 |
| [ 6.461320] [5: kworker/u16:0: 6] tfa_cont_write_vstepMax2_One: is_cold 1 |
| [ 6.465003] [1: ip6tables: 3197] !@iptables_log: command error exit (2) |
| [ 6.465965] [1: ip6tables: 3197] !@iptables_log: 20170128-12:26:38 [3002,3197] /system/bin/ip6tables -w -w -t filter |
| [ 6.465965] [1: ip6tables: 3197] |
| [ 6.467754] [6: Binder:2996_3: 3138] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.468202] [6: Binder:2996_3: 3138] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.468657] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc86dc56000, version = 170607 |
| [ 6.468762] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.468798] [6: Binder:2996_3: 3138] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.469718] [6: Binder:2996_3: 3138] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.469840] [5: kworker/u16:0: 6] [SYNC_IPC] tfadsp_write: size = 2772 |
| [ 6.469860] [5: kworker/u16:0: 6] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 4) |
| [ 6.469951] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.470711] I[0: iptables: 3201] [SYNC_IPC] abox_synchronized_ipc_handler: TFADSP_CMD_WRITE done |
| [ 6.470750] [5: kworker/u16:0: 6] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 12) |
| [ 6.470845] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.472427] [5: kworker/u16:0: 6] tfa_set_calibration_values: calibration data: 6377 |
| [ 6.472447] [5: kworker/u16:0: 6] tfa_start:[cold] device:TFA profile:music |
| [ 6.482542] [1: kworker/u16:0: 6] tfa_configure_log: set blackbox (1) |
| [ 6.482581] [1: kworker/u16:0: 6] [SYNC_IPC] tfadsp_write: size = 14 |
| [ 6.482597] [1: kworker/u16:0: 6] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 4) |
| [ 6.482687] [1: kworker/1:2: 2019] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.482838] I[0: swapper/0: 0] [SYNC_IPC] abox_synchronized_ipc_handler: TFADSP_CMD_WRITE done |
| [ 6.482875] [1: kworker/u16:0: 6] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 12) |
| [ 6.482961] [1: kworker/1:2: 2019] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 6.506187] [5: Binder:2996_2: 3112] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.516220] [5: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.516663] [5: Binder:2996_2: 3112] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.517026] [5: Binder:2996_2: 3112] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8655c4000, version = 170607 |
| [ 6.517273] [5: Binder:2996_2: 3112] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.517351] [5: Binder:2996_2: 3112] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.517819] [5: Binder:2996_2: 3112] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.537500] [2: Binder:2996_3: 3138] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.546818] [2: Binder:2996_3: 3138] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.547231] [6: Binder:2996_3: 3138] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.547452] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc874d36000, version = 170607 |
| [ 6.547557] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.547635] [6: Binder:2996_3: 3138] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.548086] [6: Binder:2996_3: 3138] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.566411] [1: mediacodec: 2996] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.588003] [5: mediacodec: 2996] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.588473] [5: mediacodec: 2996] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.588741] [5: mediacodec: 2996] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc8749eb000, version = 170607 |
| [ 6.588894] [5: mediacodec: 2996] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.588956] [5: mediacodec: 2996] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.589389] [5: mediacodec: 2996] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.599639] [6: cbd: 2979] mif: ss310ap_on: change_mr_reset -> 0 |
| [ 6.599650] [6: cbd: 2979] mif: ss310ap_on: --- |
| [ 6.599861] [6: cbd: 2979] mif: misc_ioctl: umts_boot0: IOCTL_MODEM_BOOT_ON |
| [ 6.599870] [6: cbd: 2979] mif: ss310ap_boot_on: +++ |
| [ 6.599883] [6: cbd: 2979] mif: modem_notify_event: event notify (3) ++ |
| [ 6.599896] [6: cbd: 2979] init value of usim_det0: 0 |
| [ 6.599903] [6: cbd: 2979] init value of usim_det1: 0 |
| [ 6.599909] [6: cbd: 2979] mif: modem_notify_event: event notify (3) -- |
| [ 6.599924] [6: cbd: 2979] mif: mif_disable_irq: cp_wdt(#125) is not active <ss310ap_boot_on> |
| [ 6.599934] [6: cbd: 2979] mif: mif_enable_irq: cp_fail(#124) is enabled <ss310ap_boot_on> |
| [ 6.599940] [6: cbd: 2979] mif: ss310ap_boot_on: cp_status=1 |
| [ 6.599944] [6: cbd: 2979] mif: ss310ap_boot_on: --- |
| [ 6.599966] [6: cbd: 2979] mif: misc_ioctl: umts_boot0: IOCTL_MODEM_DL_START |
| [ 6.599975] [6: cbd: 2979] mif: shmem_start_download: shmem: magic == 0x424F4F54 |
| [ 6.599981] [6: cbd: 2979] mif: ss310ap_modem_boot_confirm: ap_status=1 |
| [ 6.602315] [5: cbd: 2979] mif: cbd: std_udl_req_resp: OK!! resp 0xA00D == exp |
| [ 6.603023] [5: cbd: 2979] mif: cbd: std_udl_req_resp: OK!! resp 0xAF00 == exp |
| [ 6.603103] [5: cbd: 2979] mif: misc_ioctl: umts_boot0: IOCTL_MODEM_BOOT_OFF |
| [ 6.603116] [5: cbd: 2979] mif: ss310ap_boot_off: +++ |
| [ 6.603126] [5: cbd: 2979] exynos_disable_cp_dump_pc +++ |
| [ 6.603153] [5: cbd: 2979] exynos_disable_cp_dump_pc, cp_ctrl[0x000046aa] -> [0x000046aa] |
| [ 6.606222] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_open:413: NORMAL instance is opened [0:1] |
| [ 6.624330] [6: Binder:2996_3: 3138] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.626227] [6: Binder:2996_3: 3138] mfc_init_hw:118: MFC v11.20, F/W: 17yy, 12mm, 13dd (E) |
| [ 6.626635] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_open:505: MFC open completed [0:1] dev = ffffffc8748fc818, ctx = ffffffc874666000, version = 170607 |
| [ 6.626734] [6: Binder:2996_3: 3138] [c:0] s5p_mfc_release:589: MFC driver release is called [0:1], is_drm(0) |
| [ 6.626774] [6: Binder:2996_3: 3138] s5p_mfc_mfc_off:106: MFC h/w state: 6 |
| [ 6.626893] [3: ip6tables: 3219] audit: audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64 |
| [ 6.626907] [3: ip6tables: 3219] audit: rate limit exceeded |
| [ 6.627151] [6: Binder:2996_3: 3138] s5p_mfc_release:737: mfc driver release finished [0:0], dev = ffffffc8748fc818 |
| [ 6.652997] [4: iptables: 3222] !@iptables_log: command error exit (2) |
| [ 6.653241] [4: iptables: 3222] !@iptables_log: 20170128-12:26:38 [3002,3222] /system/bin/iptables -w -w -t filter |
| [ 6.653241] [4: iptables: 3222] |
| [ 6.655930] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:35 data:FF |
| [ 6.656556] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 6.658331] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 6.668156] [6: ip6tables: 3223] !@iptables_log: command error exit (2) |
| [ 6.668320] [6: ip6tables: 3223] !@iptables_log: 20170128-12:26:38 [3002,3223] /system/bin/ip6tables -w -w -t filter |
| [ 6.668320] [6: ip6tables: 3223] |
| [ 6.785218] [6: main: 2947] !@Zygote : primaryZygoteThreadRunning = true ZygoteAgentRunning = false |
| [ 6.787995] [6: main: 2947] !@Boot: Begin of preload() |
| [ 6.812285] [4: iptables: 3234] !@iptables_log: command error exit (2) |
| [ 6.812535] [4: iptables: 3234] !@iptables_log: 20170128-12:26:38 [3002,3234] /system/bin/iptables -w -w -t filter |
| [ 6.812535] [4: iptables: 3234] |
| [ 6.827503] [3: ip6tables: 3235] !@iptables_log: command error exit (2) |
| [ 6.827777] [3: ip6tables: 3235] !@iptables_log: 20170128-12:26:38 [3002,3235] /system/bin/ip6tables -w -w -t filter |
| [ 6.827777] [3: ip6tables: 3235] |
| [ 6.882477] [5: main: 2947] !@PPR: primaryZygoteThreadRunning = true ZygoteAgentRunning = false |
| [ 6.887961] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:36 data:FF |
| [ 6.888568] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 6.890382] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 6.962299] [6: iptables: 3252] !@iptables_log: command error exit (2) |
| [ 6.962630] [6: iptables: 3252] !@iptables_log: 20170128-12:26:38 [3002,3252] /system/bin/iptables -w -w -t filter |
| [ 6.962630] [6: iptables: 3252] |
| [ 6.976057] [6: ip6tables: 3253] !@iptables_log: command error exit (2) |
| [ 6.976188] [6: ip6tables: 3253] !@iptables_log: 20170128-12:26:38 [3002,3253] /system/bin/ip6tables -w -w -t filter |
| [ 6.976188] [6: ip6tables: 3253] |
| [ 7.072615] [6: Thread-1: 3245] !@prldclss2: 344 classes in 165ms. |
| [ 7.119844] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:37 data:FF |
| [ 7.119942] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_read_info_work: fac_nv:9A, force_index:255 |
| [ 7.120496] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 7.122259] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 7.128563] [3: iptables: 3264] !@iptables_log: command error exit (2) |
| [ 7.128759] [3: iptables: 3264] !@iptables_log: 20170128-12:26:39 [3002,3264] /system/bin/iptables -w -w -t filter |
| [ 7.128759] [3: iptables: 3264] |
| [ 7.148932] [2: ip6tables: 3265] !@iptables_log: command error exit (2) |
| [ 7.149123] [2: ip6tables: 3265] !@iptables_log: 20170128-12:26:39 [3002,3265] /system/bin/ip6tables -w -w -t filter |
| [ 7.149123] [2: ip6tables: 3265] |
| [ 7.294126] [3: iptables: 3279] !@iptables_log: command error exit (2) |
| [ 7.294284] [3: iptables: 3279] !@iptables_log: 20170128-12:26:39 [3002,3279] /system/bin/iptables -w -w -t filter |
| [ 7.294284] [3: iptables: 3279] |
| [ 7.315007] [3: ip6tables: 3280] !@iptables_log: command error exit (2) |
| [ 7.315228] [3: ip6tables: 3280] !@iptables_log: 20170128-12:26:39 [3002,3280] /system/bin/ip6tables -w -w -t filter |
| [ 7.315228] [3: ip6tables: 3280] |
| [ 7.351854] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:1 data:01 |
| [ 7.351958] [6: kworker/6:0: 40] [sec_input] sec_tclm_check_cal_case: cal_count value [1] |
| [ 7.352517] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 7.354327] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 7.460214] [3: iptables: 3291] !@iptables_log: command error exit (2) |
| [ 7.460463] [3: iptables: 3291] !@iptables_log: 20170128-12:26:39 [3002,3291] /system/bin/iptables -w -w -t raw |
| [ 7.460463] [3: iptables: 3291] |
| [ 7.475120] [6: main: 2947] !@prldclssM: 1715 classes in 569ms. |
| [ 7.476725] [5: ip6tables: 3292] !@iptables_log: command error exit (2) |
| [ 7.476998] [5: ip6tables: 3292] !@iptables_log: 20170128-12:26:39 [3002,3292] /system/bin/ip6tables -w -w -t raw |
| [ 7.476998] [5: ip6tables: 3292] |
| [ 7.485775] [4: kworker/u16:2: 241] tfa98xx_monitor(): TDM status: 0x7 (ref. 0x1: synchronized) |
| [ 7.511296] [6: Thread-0: 3244] !@prldclss1: 888 classes in 605ms. |
| [ 7.583860] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:1 data:01 |
| [ 7.584747] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 7.586294] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 7.586334] [7: Thread-2: 3246] !@prldclss3: 1221 classes in 679ms. |
| [ 7.596246] [7: iptables: 3305] !@iptables_log: command error exit (2) |
| [ 7.596329] [7: iptables: 3305] !@iptables_log: 20170128-12:26:39 [3002,3305] /system/bin/iptables -w -w -t raw |
| [ 7.596329] [7: iptables: 3305] |
| [ 7.611710] [1: ip6tables: 3306] !@iptables_log: command error exit (2) |
| [ 7.612012] [1: ip6tables: 3306] !@iptables_log: 20170128-12:26:39 [3002,3306] /system/bin/ip6tables -w -w -t raw |
| [ 7.612012] [1: ip6tables: 3306] |
| [ 7.622694] [6: cameraserver: 3310] [@]hw init start |
| [ 7.623456] [6: cameraserver: 3310] [@]fimc_is_sec_file_exist: file(/data/camera/camera_hw_err_cnt.dat) not exist! |
| [ 7.623471] [6: cameraserver: 3310] [@]Retry count = 20 |
| [ 7.623477] [6: cameraserver: 3310] [@]Start hw init. Check sensor success! |
| [ 7.624592] [0: cameraserver: 3310] [@][ERR]fimc_is_sec_ldo_enabled:1503:fimc_is_sec_ldo_enabled : regulator_get(VDDIO_1.8V_CAM) fail |
| [ 7.624592] [0: cameraserver: 3310] |
| [ 7.624619] [0: cameraserver: 3310] [@]fimc_is_sec_rom_power_on: Sensor position = 0 |
| [ 7.624630] [0: cameraserver: 3310] [@][0]module(58) is found |
| [ 7.624640] [0: cameraserver: 3310] [@]fimc_is_sec_rom_power_on : Find matched sensor_id (58) |
| [ 7.624653] [0: cameraserver: 3310] [@] pin_ctrl(act(1), pin(118), val(1), nm(pdaf gpio_cam_io_en) |
| [ 7.626745] [0: cameraserver: 3310] [@]Camera: read cal data from Rear EEPROM |
| [ 7.627123] [0: cameraserver: 3310] [@](fimc_is_i2c_config):onoff(1) |
| [ 7.632501] [4: cameraserver: 3310] [@](fimc_is_i2c_config):onoff(0) |
| [ 7.632690] [4: cameraserver: 3310] fimc_is_i2c_config: Failed to configure i2c pin |
| [ 7.632703] [4: cameraserver: 3310] Camera: EEPROM Cal map_version = V003 |
| [ 7.632714] [4: cameraserver: 3310] [@]Camera: I2C read cal data |
| [ 7.632724] [4: cameraserver: 3310] [@](fimc_is_i2c_config):onoff(1) |
| [ 7.685627] [2: iptables: 3320] audit: audit_lost=31 audit_rate_limit=20 audit_backlog_limit=64 |
| [ 7.685645] [2: iptables: 3320] audit: rate limit exceeded |
| [ 7.733007] [6: iptables: 3324] !@iptables_log: command error exit (2) |
| [ 7.733117] [6: iptables: 3324] !@iptables_log: 20170128-12:26:39 [3002,3324] /system/bin/iptables -w -w -t raw |
| [ 7.733117] [6: iptables: 3324] |
| [ 7.748248] [5: ip6tables: 3325] !@iptables_log: command error exit (2) |
| [ 7.748477] [5: ip6tables: 3325] !@iptables_log: 20170128-12:26:39 [3002,3325] /system/bin/ip6tables -w -w -t raw |
| [ 7.748477] [5: ip6tables: 3325] |
| [ 7.749415] [0: kworker/0:1H: 2758] mif: cmd_init_start_handler: shmem: INIT_START <- s327ap (s327ap.state:BOOTING cp_boot_done:0) |
| [ 7.749452] [0: kworker/0:1H: 2758] mif: setup_desc_rgn: SHMEM {base:0xffffff800910a000 size:8388608} |
| [ 7.749468] [0: kworker/0:1H: 2758] mif: setup_desc_rgn: G_DESC_OFFSET = 2048(0xffffff800910a800) |
| [ 7.749479] [0: kworker/0:1H: 2758] mif: setup_desc_rgn: RB_CH_OFFSET = 2060 (0xffffff800910a80c) |
| [ 7.749502] [0: kworker/0:1H: 2758] mif: setup_desc_rgn: RBD_PAIR_OFFSET = 2572 (0xffffff800910aa0c) |
| [ 7.749518] [0: kworker/0:1H: 2758] mif: setup_desc_rgn: RBP_SET_OFFSET = 3852 (0xffffff800910af0c) |
| [ 7.749527] [0: kworker/0:1H: 2758] mif: setup_desc_rgn: Complete!! |
| [ 7.749633] [0: kworker/0:1H: 2758] mif: SBD_IPC {shmem_base:0xFFFFFF800910A000 shmem_size:8388608} |
| [ 7.749648] [0: kworker/0:1H: 2758] mif: SBD_IPC {version:1 num_channels:9 rbps_offset:3852} |
| [ 7.749664] [0: kworker/0:1H: 2758] mif: RB_DESC[0 ][UL](offset:2572) = {id:0 ch:235 dir:UL} {sbdv_offset:3924 rb_len:16 } {buff_size:4096 payload_offset:0} |
| [ 7.749683] [0: kworker/0:1H: 2758] mif: RB_DESC[0 ][DL](offset:2592) = {id:0 ch:235 dir:DL} {sbdv_offset:4052 rb_len:32 } {buff_size:4096 payload_offset:0} |
| [ 7.749700] [0: kworker/0:1H: 2758] mif: RB_DESC[1 ][UL](offset:2612) = {id:1 ch:236 dir:UL} {sbdv_offset:4308 rb_len:16 } {buff_size:4096 payload_offset:0} |
| [ 7.749714] [0: kworker/0:1H: 2758] mif: RB_DESC[1 ][DL](offset:2632) = {id:1 ch:236 dir:DL} {sbdv_offset:4436 rb_len:32 } {buff_size:4096 payload_offset:0} |
| [ 7.749732] [0: kworker/0:1H: 2758] mif: RB_DESC[2 ][UL](offset:2652) = {id:2 ch:245 dir:UL} {sbdv_offset:4692 rb_len:16 } {buff_size:2048 payload_offset:0} |
| [ 7.749750] [0: kworker/0:1H: 2758] mif: RB_DESC[2 ][DL](offset:2672) = {id:2 ch:245 dir:DL} {sbdv_offset:4820 rb_len:512} {buff_size:2048 payload_offset:0} |
| [ 7.749768] [0: kworker/0:1H: 2758] mif: RB_DESC[3 ][UL](offset:2692) = {id:3 ch:1 dir:UL} {sbdv_offset:8916 rb_len:32 } {buff_size:2048 payload_offset:0} |
| [ 7.749782] [0: kworker/0:1H: 2758] mif: RB_DESC[3 ][DL](offset:2712) = {id:3 ch:1 dir:DL} {sbdv_offset:9172 rb_len:64 } {buff_size:2048 payload_offset:0} |
| [ 7.749805] [0: kworker/0:1H: 2758] mif: RB_DESC[4 ][UL](offset:2732) = {id:4 ch:25 dir:UL} {sbdv_offset:9684 rb_len:16 } {buff_size:2048 payload_offset:0} |
| [ 7.749823] [0: kworker/0:1H: 2758] mif: RB_DESC[4 ][DL](offset:2752) = {id:4 ch:25 dir:DL} {sbdv_offset:9812 rb_len:16 } {buff_size:2048 payload_offset:0} |
| [ 7.749841] [0: kworker/0:1H: 2758] mif: RB_DESC[5 ][UL](offset:2772) = {id:5 ch:28 dir:UL} {sbdv_offset:9940 rb_len:16 } {buff_size:2048 payload_offset:0} |
| [ 7.749859] [0: kworker/0:1H: 2758] mif: RB_DESC[5 ][DL](offset:2792) = {id:5 ch:28 dir:DL} {sbdv_offset:10068 rb_len:128} {buff_size:2048 payload_offset:0} |
| [ 7.749872] [0: kworker/0:1H: 2758] mif: RB_DESC[6 ][UL](offset:2812) = {id:6 ch:244 dir:UL} {sbdv_offset:11092 rb_len:16 } {buff_size:2048 payload_offset:0} |
| [ 7.749892] [0: kworker/0:1H: 2758] mif: RB_DESC[6 ][DL](offset:2832) = {id:6 ch:244 dir:DL} {sbdv_offset:11220 rb_len:32 } {buff_size:2048 payload_offset:0} |
| [ 7.749910] [0: kworker/0:1H: 2758] mif: RB_DESC[7 ][UL](offset:2852) = {id:7 ch:10 dir:UL} {sbdv_offset:11476 rb_len:256} {buff_size:2048 payload_offset:0} |
| [ 7.749929] [0: kworker/0:1H: 2758] mif: RB_DESC[7 ][DL](offset:2872) = {id:7 ch:10 dir:DL} {sbdv_offset:13524 rb_len:256} {buff_size:2048 payload_offset:0} |
| [ 7.749943] [0: kworker/0:1H: 2758] mif: RB_DESC[8 ][UL](offset:2892) = {id:8 ch:11 dir:UL} {sbdv_offset:15572 rb_len:512} {buff_size:2048 payload_offset:0} |
| [ 7.749961] [0: kworker/0:1H: 2758] mif: RB_DESC[8 ][DL](offset:2912) = {id:8 ch:11 dir:DL} {sbdv_offset:19668 rb_len:1024} {buff_size:2048 payload_offset:0} |
| [ 7.750011] [0: kworker/0:1H: 2758] mif: cmd_init_start_handler: shmem: PIF_INIT_DONE -> s327ap |
| [ 7.750452] [0: kworker/0:1H: 2758] mif: cmd_phone_start_handler: shmem: CP_START <- s327ap (s327ap.state:BOOTING cp_boot_done:0) |
| [ 7.750479] [0: kworker/0:1H: 2758] mif: rild_ready: shmem: umts_ipc0.opened=0, umts_rfs0.opened=0 |
| [ 7.750499] [0: kworker/0:1H: 2758] mif: modem_notify_event: event notify (4) ++ |
| [ 7.750511] [0: kworker/0:1H: 2758] mif: modem_notify_event: event notify (4) -- |
| [ 7.750535] [5: cbd: 2979] mif: mif_enable_irq: cp_wdt(#125) is enabled <ss310ap_boot_off> |
| [ 7.750552] [5: cbd: 2979] mif: io_dev_modem_state_changed: s327ap->state changed (BOOTING -> ONLINE) |
| [ 7.750563] [5: cbd: 2979] mif: ss310ap_boot_off: --- |
| [ 7.750576] [5: cbd: 2979] mif: mif_disable_irq: cp_fail(#124) is disabled <ss310ap_boot_off> |
| [ 7.750610] [5: cbd: 2979] mif: shmem_ioctl: shmem: cmd 0x00006F48 |
| [ 7.750621] [5: cbd: 2979] mif: shmem_ioctl: Clear CP boot log |
| [ 7.751140] [5: cbd: 2979] mif: misc_release: umts_boot0 (opened 2) by cbd |
| [ 7.759679] [0: kworker/u16:5: 1617] [SSP] debug_work_func( 376): (9) - Sensor state: 0x1f24f4176, Reset cnt: 0, Comm fail: 0, Dump cnt : 0, Time out: 0 No event : 0 |
| [ 7.760837] [0: kworker/u16:5: 1617] [SSP] open gyro calibration -40, 36, -16 |
| [ 7.760872] [0: kworker/u16:5: 1617] [SSP] ssp_send_command( 334): cmd 3 type 4 subcmd 35 send_buf_len 6 timeout 0 |
| [ 7.764460] [7: main: 2947] !@preload(): PC Completed!! |
| [ 7.764838] [5: cbd: 2979] mif: cbd: boot_wake_lock: /sys/power/wake_unlock/ss310 |
| [ 7.764942] [5: cbd: 2979] mif: cbd: main: Boot up process done!!! |
| [ 7.764984] [5: cbd: 2979] mif: cbd: status_loop: CP status_loop start (modem = 13) |
| [ 7.765044] [5: cbd: 2979] mif: misc_open: umts_boot0 (opened 3) by cbd |
| [ 7.765945] [6: cbd: 2979] mif: cbd: status_loop: Wait event from modem 13 |
| [ 7.767215] [7: kworker/u16:5: 1617] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 7.767228] [7: kworker/u16:5: 1617] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 7.767234] [7: kworker/u16:5: 1617] [SSP] clean_msg( 74): kfree(msg) |
| [ 7.767241] [7: kworker/u16:5: 1617] [SSP] Set temp gyro cal data -40, 36, -16 |
| [ 7.767246] [7: kworker/u16:5: 1617] [SSP] Set gyro cal data -40, 36, -16 |
| [ 7.815836] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:5 data:04 |
| [ 7.816446] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 7.818320] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 7.822507] [6: cameraserver: 3310] [@](fimc_is_i2c_config):onoff(0) |
| [ 7.822634] [6: cameraserver: 3310] fimc_is_i2c_config: Failed to configure i2c pin |
| [ 7.822641] [6: cameraserver: 3310] [@]OEM start = 0x00000100, end = 0x000001bf |
| [ 7.822646] [6: cameraserver: 3310] [@]AWB start = 0x00000200, end = 0x0000021f |
| [ 7.822651] [6: cameraserver: 3310] [@]Shading start = 0x00000300, end = 0x0000167f |
| [ 7.822656] [6: cameraserver: 3310] [@]AP PDAF start = 0x000016b0, end = 0x00001c6f |
| [ 7.822661] [6: cameraserver: 3310] [@]++++ EEPROM data info |
| [ 7.822666] [6: cameraserver: 3310] [@]1. Header info |
| [ 7.822670] [6: cameraserver: 3310] [@] Module info : Q16LLKA04SM |
| [ 7.822675] [6: cameraserver: 3310] [@] ID : Q |
| [ 7.822679] [6: cameraserver: 3310] [@] Pixel num : 16 |
| [ 7.822683] [6: cameraserver: 3310] [@] ISP ID : L |
| [ 7.822687] [6: cameraserver: 3310] [@] Sensor Maker : L |
| [ 7.822692] [6: cameraserver: 3310] [@] Year : K |
| [ 7.822696] [6: cameraserver: 3310] [@] Month : A |
| [ 7.822700] [6: cameraserver: 3310] [@] Release num : 04 |
| [ 7.822704] [6: cameraserver: 3310] [@] Manufacturer ID : S |
| [ 7.822708] [6: cameraserver: 3310] [@] Module ver : M |
| [ 7.822713] [6: cameraserver: 3310] [@] project_name : 0JACKPOT |
| [ 7.822717] [6: cameraserver: 3310] [@] Cal data map ver : V003 |
| [ 7.822722] [6: cameraserver: 3310] [@] Module ID : SCKLO157F002419 |
| [ 7.822726] [6: cameraserver: 3310] [@]2. OEM info |
| [ 7.822731] [6: cameraserver: 3310] [@] Module info : Q16LLKA04SM |
| [ 7.822735] [6: cameraserver: 3310] [@]3. AWB info |
| [ 7.822739] [6: cameraserver: 3310] [@] Module info : Q16LLKA04SM |
| [ 7.822743] [6: cameraserver: 3310] [@]4. Shading info |
| [ 7.822747] [6: cameraserver: 3310] [@] Module info : Q16LLKA04SM |
| [ 7.822751] [6: cameraserver: 3310] [@]5. PDAF info |
| [ 7.822755] [6: cameraserver: 3310] [@] Module info : Q16LLKA04SM |
| [ 7.822760] [6: cameraserver: 3310] [@]---- EEPROM data info |
| [ 7.822764] [6: cameraserver: 3310] [@]+++ fimc_is_sec_check_rear_cal_crc32 |
| [ 7.822859] [6: cameraserver: 3310] [@]KEY does not exist. |
| [ 7.822867] [6: cameraserver: 3310] [@]fimc_is_sec_fw_find sensor id 58 setfile_2p6.bin |
| [ 7.822977] [6: cameraserver: 3310] [@]start, file path /system/vendor/firmware/fimc_is_lib.bin, size 3735421 Bytes |
| [ 7.822983] [6: cameraserver: 3310] [@]Phone FW size is larger than FW buffer. Use vmalloc. |
| [ 7.850475] I[0: swapper/0: 0] mif: cmd_phone_start_handler: shmem: CP_START <- s327ap (s327ap.state:ONLINE cp_boot_done:0) |
| [ 7.850496] I[0: swapper/0: 0] mif: rild_ready: shmem: umts_ipc0.opened=0, umts_rfs0.opened=0 |
| [ 7.850555] [6: cameraserver: 3310] [@]Camera: phone fw version: Q16LLKL01SA |
| [ 7.850878] [6: cameraserver: 3310] [@]fimc_is_sec_rom_power_off: Sensor position = 0 |
| [ 7.850886] [6: cameraserver: 3310] [@][0]module(58) is found |
| [ 7.850893] [6: cameraserver: 3310] [@] pin_ctrl(act(0), pin(0), val(1), nm(pin_none) |
| [ 7.850899] [6: cameraserver: 3310] [@] pin_ctrl(act(1), pin(118), val(0), nm(pdaf gpio_cam_io_en) |
| [ 7.851489] [6: cameraserver: 3310] [@][ERR]fimc_is_sec_ldo_enabled:1503:fimc_is_sec_ldo_enabled : regulator_get(VDDIO_1.8V_CAM) fail |
| [ 7.851489] [6: cameraserver: 3310] |
| [ 7.851503] [6: cameraserver: 3310] [@]fimc_is_sec_rom_power_on: Sensor position = 1 |
| [ 7.851509] [6: cameraserver: 3310] [@][0][ERR]fimc_is_search_sensor_module:106:module(44) is not found |
| [ 7.851515] [6: cameraserver: 3310] [@][1]module(44) is found |
| [ 7.851519] [6: cameraserver: 3310] [@]fimc_is_sec_rom_power_on : Find matched sensor_id (44) |
| [ 7.851525] [6: cameraserver: 3310] [@] pin_ctrl(act(1), pin(73), val(1), nm(gpio_fcam1_en) |
| [ 7.851531] [6: cameraserver: 3310] [@] pin_ctrl(act(1), pin(74), val(1), nm(gpio_fcam2_en) |
| [ 7.851536] [6: cameraserver: 3310] [@] pin_ctrl(act(1), pin(118), val(1), nm(gpio_rcam_en) |
| [ 7.852598] [6: cameraserver: 3310] [@]Camera: read cal data from Front EEPROM |
| [ 7.853641] [7: cameraserver: 3310] Camera: EEPROM Cal map_version = VF05 |
| [ 7.853654] [7: cameraserver: 3310] [@]Camera: I2C read cal data |
| [ 7.864137] [3: iptables: 3344] !@iptables_log: command error exit (2) |
| [ 7.864449] [3: iptables: 3344] !@iptables_log: 20170128-12:26:39 [3002,3344] /system/bin/iptables -w -w -t mangle |
| [ 7.864449] [3: iptables: 3344] |
| [ 7.885126] [4: ip6tables: 3345] !@iptables_log: command error exit (2) |
| [ 7.885367] [4: ip6tables: 3345] !@iptables_log: 20170128-12:26:39 [3002,3345] /system/bin/ip6tables -w -w -t mangle |
| [ 7.885367] [4: ip6tables: 3345] |
| [ 7.921753] [6: main: 2948] !@Zygote : primaryZygoteThreadRunning = false ZygoteAgentRunning = false |
| [ 7.925894] [1: rild: 3047] mif: misc_release: umts_boot0 (opened 2) by rild |
| [ 7.926041] [1: rild: 3047] mif: shmem_init_comm: umts_rfs0 is not opened yet |
| [ 7.926055] [1: rild: 3047] mif: misc_open: umts_ipc0 (opened 1) by rild |
| [ 7.926091] [1: rild: 3047] mif: write_clk_table_to_shmem: PARSER_VERSION: CT0 |
| [ 7.926102] [1: rild: 3047] mif: write_clk_table_to_shmem: TOTAL_TABLE_COUNT: 4 |
| [ 7.926112] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_NAME[1] : CL0 |
| [ 7.926122] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_COUNT[1]: 17 |
| [ 7.926133] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_NAME[2] : CL1 |
| [ 7.926143] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_COUNT[2]: 18 |
| [ 7.926153] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_NAME[3] : MIF |
| [ 7.926163] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_COUNT[3]: 10 |
| [ 7.926174] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_NAME[4] : INT |
| [ 7.926184] [1: rild: 3047] mif: write_clk_table_to_shmem: TABLE_COUNT[4]: 5 |
| [ 7.926194] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][1] : 208000 |
| [ 7.926204] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][2] : 312000 |
| [ 7.926215] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][3] : 520000 |
| [ 7.926225] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][4] : 728000 |
| [ 7.926235] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][5] : 936000 |
| [ 7.926246] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][6] : 1144000 |
| [ 7.926256] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][7] : 1352000 |
| [ 7.926266] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][8] : 1560000 |
| [ 7.926277] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][9] : 1664000 |
| [ 7.926287] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][10] : 1768000 |
| [ 7.926298] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][11] : 1872000 |
| [ 7.926309] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][12] : 1976000 |
| [ 7.926319] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][13] : 2080000 |
| [ 7.926329] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][14] : 2184000 |
| [ 7.926340] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][15] : 2288000 |
| [ 7.926350] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][16] : 2392000 |
| [ 7.926361] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[1][17] : 2496000 |
| [ 7.926371] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][1] : 208000 |
| [ 7.926382] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][2] : 343000 |
| [ 7.926392] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][3] : 449000 |
| [ 7.926402] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][4] : 546000 |
| [ 7.926413] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][5] : 676000 |
| [ 7.926423] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][6] : 757000 |
| [ 7.926434] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][7] : 839000 |
| [ 7.926444] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][8] : 902000 |
| [ 7.926454] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][9] : 1014000 |
| [ 7.926464] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][10] : 1144000 |
| [ 7.926475] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][11] : 1248000 |
| [ 7.926485] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][12] : 1352000 |
| [ 7.926496] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][13] : 1482000 |
| [ 7.926506] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][14] : 1586000 |
| [ 7.926516] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][15] : 1690000 |
| [ 7.926527] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][16] : 1794000 |
| [ 7.926537] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][17] : 1898000 |
| [ 7.926547] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[2][18] : 2002000 |
| [ 7.926558] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][1] : 420000 |
| [ 7.926568] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][2] : 546000 |
| [ 7.926579] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][3] : 676000 |
| [ 7.926589] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][4] : 845000 |
| [ 7.926599] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][5] : 1014000 |
| [ 7.926610] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][6] : 1352000 |
| [ 7.926620] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][7] : 1539000 |
| [ 7.926631] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][8] : 1794000 |
| [ 7.926641] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][9] : 2002000 |
| [ 7.926651] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[3][10] : 2093000 |
| [ 7.926663] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[4][1] : 107000 |
| [ 7.926673] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[4][2] : 133000 |
| [ 7.926684] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[4][3] : 267000 |
| [ 7.926694] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[4][4] : 333000 |
| [ 7.926705] [1: rild: 3047] mif: write_clk_table_to_shmem: CLOCK_TABLE[4][5] : 533000 |
| [ 7.926716] [1: rild: 3047] mif: shmem_init_comm: shmem: umts_rfs0->INIT_END->s327ap |
| [ 7.926746] [1: rild: 3047] mif: misc_open: umts_rfs0 (opened 1) by rild |
| [ 7.928900] [5: rild: 3087] mif: misc_release: umts_boot0 (opened 1) by rild |
| [ 7.928978] [5: rild: 3087] mif: misc_open: umts_ipc1 (opened 1) by rild |
| [ 7.940545] [7: main: 2947] !@preload(): PR Completed!! |
| [ 8.008360] [6: iptables: 3372] !@iptables_log: command error exit (2) |
| [ 8.008465] [6: iptables: 3372] !@iptables_log: 20170128-12:26:39 [3002,3372] /system/bin/iptables -w -w -t mangle |
| [ 8.008465] [6: iptables: 3372] |
| [ 8.023655] [5: ip6tables: 3373] !@iptables_log: command error exit (2) |
| [ 8.023916] [5: ip6tables: 3373] !@iptables_log: 20170128-12:26:39 [3002,3373] /system/bin/ip6tables -w -w -t mangle |
| [ 8.023916] [5: ip6tables: 3373] |
| [ 8.033030] [7: main: 2947] !@Boot: End of preload() |
| [ 8.047874] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:6 data:01 |
| [ 8.048502] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 8.050290] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 8.152468] [4: iptables: 3389] !@iptables_log: command error exit (2) |
| [ 8.152682] [4: iptables: 3389] !@iptables_log: 20170128-12:26:40 [3002,3389] /system/bin/iptables -w -w -t mangle |
| [ 8.152682] [4: iptables: 3389] |
| [ 8.166004] [7: ip6tables: 3393] !@iptables_log: command error exit (2) |
| [ 8.166090] [7: ip6tables: 3393] !@iptables_log: 20170128-12:26:40 [3002,3393] /system/bin/ip6tables -w -w -t mangle |
| [ 8.166090] [7: ip6tables: 3393] |
| [ 8.233002] [7: cameraserver: 3310] [@]FRONT EEPROM header version = P16LLKA00CM |
| [ 8.233016] [7: cameraserver: 3310] [@]AWB start = 0x00000100, end = 0x0000012f |
| [ 8.233022] [7: cameraserver: 3310] [@]Shading start = 0x000001c0, end = 0x0000153f |
| [ 8.233028] [7: cameraserver: 3310] [@]Crosstalk cal data start = 0x00001580, end = 0x00001d8f |
| [ 8.233033] [7: cameraserver: 3310] [@]AWB2 start = 0x00001dc0, end = 0x00001def |
| [ 8.233037] [7: cameraserver: 3310] [@]Shading2 start = 0x00001e80, end = 0x000031ff |
| [ 8.233042] [7: cameraserver: 3310] [@]++++ EEPROM data info |
| [ 8.233046] [7: cameraserver: 3310] [@]1. Header info |
| [ 8.233051] [7: cameraserver: 3310] [@] Module info : P16LLKA00CM |
| [ 8.233055] [7: cameraserver: 3310] [@] ID : P |
| [ 8.233060] [7: cameraserver: 3310] [@] Pixel num : 16 |
| [ 8.233064] [7: cameraserver: 3310] [@] ISP ID : L |
| [ 8.233068] [7: cameraserver: 3310] [@] Sensor Maker : L |
| [ 8.233072] [7: cameraserver: 3310] [@] Year : K |
| [ 8.233076] [7: cameraserver: 3310] [@] Month : A |
| [ 8.233080] [7: cameraserver: 3310] [@] Release num : 00 |
| [ 8.233085] [7: cameraserver: 3310] [@] Manufacturer ID : C |
| [ 8.233089] [7: cameraserver: 3310] [@] Module ver : M |
| [ 8.233093] [7: cameraserver: 3310] [@] project_name : 0JACKPOT |
| [ 8.233098] [7: cameraserver: 3310] [@] Cal data map ver : VF05 |
| [ 8.233103] [7: cameraserver: 3310] [@] Module ID : CVLAF20CB000103 |
| [ 8.233107] [7: cameraserver: 3310] [@]2. OEM info |
| [ 8.233111] [7: cameraserver: 3310] [@] Module info : |
| [ 8.233115] [7: cameraserver: 3310] [@]3. AWB info |
| [ 8.233120] [7: cameraserver: 3310] [@] Module info : P16LLKA00CM |
| [ 8.233124] [7: cameraserver: 3310] [@]4. Shading info |
| [ 8.233128] [7: cameraserver: 3310] [@] Module info : P16LLKA00CM |
| [ 8.233132] [7: cameraserver: 3310] [@]5. Crosstalk cal data info |
| [ 8.233137] [7: cameraserver: 3310] [@] Module info : P16LLKA00CM |
| [ 8.233141] [7: cameraserver: 3310] [@]6. Header info of front2 |
| [ 8.233145] [7: cameraserver: 3310] [@] Module info : P08LFKA00CM |
| [ 8.233149] [7: cameraserver: 3310] [@] ID : P |
| [ 8.233153] [7: cameraserver: 3310] [@] Pixel num : 08 |
| [ 8.233157] [7: cameraserver: 3310] [@] ISP ID : L |
| [ 8.233161] [7: cameraserver: 3310] [@] Sensor Maker : F |
| [ 8.233165] [7: cameraserver: 3310] [@] Year : K |
| [ 8.233169] [7: cameraserver: 3310] [@] Month : A |
| [ 8.233174] [7: cameraserver: 3310] [@] Release num : 00 |
| [ 8.233178] [7: cameraserver: 3310] [@] Manufacturer ID : C |
| [ 8.233182] [7: cameraserver: 3310] [@] Module ver : M |
| [ 8.233186] [7: cameraserver: 3310] [@]7. AWB info |
| [ 8.233190] [7: cameraserver: 3310] [@] Module info : P08LFKA00CM |
| [ 8.233195] [7: cameraserver: 3310] [@]8. Shading info |
| [ 8.233199] [7: cameraserver: 3310] [@] Module info : P08LFKA00CM |
| [ 8.233203] [7: cameraserver: 3310] [@]---- EEPROM data info |
| [ 8.233208] [7: cameraserver: 3310] [@]+++ fimc_is_sec_check_front_cal_crc32 +++ |
| [ 8.233218] [7: cameraserver: 3310] fimc_is_sec_check_front_cal_crc32: front skip to check oem crc32 |
| [ 8.233296] [7: cameraserver: 3310] [@][fimc_is_sec_check_front_cal_crc32] crc32_check_front 1 crc32_check_front2 1 crc32_header_check_front 1 |
| [ 8.233314] [7: cameraserver: 3310] [@]KEY does not exist. |
| [ 8.233323] [7: cameraserver: 3310] [@]fimc_is_sec_fw_find_front sensor id 44 setfile_3p8sp.bin |
| [ 8.233329] [7: cameraserver: 3310] [@]fimc_is_sec_rom_power_off: Sensor position = 1 |
| [ 8.233335] [7: cameraserver: 3310] [@][0][ERR]fimc_is_search_sensor_module:106:module(44) is not found |
| [ 8.233341] [7: cameraserver: 3310] [@][1]module(44) is found |
| [ 8.233347] [7: cameraserver: 3310] [@] pin_ctrl(act(1), pin(118), val(0), nm(gpio_rcam_en) |
| [ 8.233352] [7: cameraserver: 3310] [@] pin_ctrl(act(1), pin(74), val(0), nm(gpio_fcam2_en) |
| [ 8.233357] [7: cameraserver: 3310] [@] pin_ctrl(act(1), pin(73), val(0), nm(gpio_fcam1_en) |
| [ 8.236542] [7: cameraserver: 3310] [@][LIB]binary info[DDK] - type: C/D, from: built-in |
| [ 8.239671] [4: cameraserver: 3310] [@]DDK version : S5E7885 7657-2017/12/01 18:30:49]Q16LLKL01SA |
| [ 8.250638] [2: cameraserver: 3310] [@][LIB]binary info[RTA] - type: C/D, from: built-in |
| [ 8.252764] [2: cameraserver: 3310] [@]RTA version : S5E7885 7657-2017/12/01 18:30:52]Q16LLKL01SM |
| [ 8.253164] [2: cameraserver: 3310] [@]hw init done |
| [ 8.271774] [7: iptables: 3420] !@iptables_log: command error exit (2) |
| [ 8.272064] [7: iptables: 3420] !@iptables_log: 20170128-12:26:40 [3002,3420] /system/bin/iptables -w -w -t nat |
| [ 8.272064] [7: iptables: 3420] |
| [ 8.279906] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data: offset:7 data:00 |
| [ 8.280004] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] get_tsp_nvm_data_by_size: offset:8, length:2, size:8 |
| [ 8.280538] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 8.282285] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 6 0 2 2 0 0 |
| [ 8.309744] [7: system_server: 3390] !@Boot: Entered the Android system server! |
| [ 8.315440] [6: iptables: 3425] !@iptables_log: command error exit (2) |
| [ 8.315543] [6: iptables: 3425] !@iptables_log: 20170128-12:26:40 [3002,3425] /system/bin/iptables -w -w -t nat |
| [ 8.315543] [6: iptables: 3425] |
| [ 8.351653] [5: cameraserver: 2985] camera rear: camera_rear_sensorid_show: E |
| [ 8.353207] [5: cameraserver: 2985] camera front: camera_front_sensorid_show: E |
| [ 8.388085] [6: iptables: 3432] !@iptables_log: command error exit (2) |
| [ 8.388175] [6: iptables: 3432] !@iptables_log: 20170128-12:26:40 [3002,3432] /system/bin/iptables -w -w -t nat |
| [ 8.388175] [6: iptables: 3432] |
| [ 8.426524] [7: init: 1] init: Service 'icd' (pid 2787) exited with status 1 |
| [ 8.439051] [7: iptables: 3437] !@iptables_log: command error exit (2) |
| [ 8.439160] [7: iptables: 3437] !@iptables_log: 20170128-12:26:40 [3002,3437] /system/bin/iptables -w -t filter -D |
| [ 8.439160] [7: iptables: 3437] |
| [ 8.453509] [3: ip6tables: 3438] !@iptables_log: command error exit (2) |
| [ 8.453717] [3: ip6tables: 3438] !@iptables_log: 20170128-12:26:40 [3002,3438] /system/bin/ip6tables -w -t filter -D |
| [ 8.453717] [3: ip6tables: 3438] |
| [ 8.512368] [6: kworker/6:0: 40] [sec_input] sec_tclm_get_nvm_all: cal_count:1, pos:4(LCIA), hist_count:1, lastp:0 |
| [ 8.512660] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_read_info_work: tune_fix_ver [0109] |
| [ 8.512668] [6: kworker/6:0: 40] [sec_input] sec_tclm_position_history: [Now] LCIA1 |
| [ 8.512673] [6: kworker/6:0: 40] [sec_input] sec_tclm_position_history: [Old] O6 |
| [ 8.512684] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_run_rawdata_all: start (noise:0, wet:0)## |
| [ 8.512694] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_fix_tmode |
| [ 8.513086] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 6 0 0 0 |
| [ 8.526675] [5: iptables: 3447] !@iptables_log: command error exit (2) |
| [ 8.526898] [5: iptables: 3447] !@iptables_log: 20170128-12:26:40 [3002,3447] /system/bin/iptables -w -t filter -D |
| [ 8.526898] [5: iptables: 3447] |
| [ 8.544520] [6: ip6tables: 3448] !@iptables_log: command error exit (2) |
| [ 8.544627] [6: ip6tables: 3448] !@iptables_log: 20170128-12:26:40 [3002,3448] /system/bin/ip6tables -w -t filter -D |
| [ 8.544627] [6: ip6tables: 3448] |
| [ 8.559622] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_read_frame: type 3 |
| [ 8.639124] [5: iptables: 3458] !@iptables_log: command error exit (2) |
| [ 8.639368] [5: iptables: 3458] !@iptables_log: 20170128-12:26:40 [3002,3458] /system/bin/iptables -w -t filter -D |
| [ 8.639368] [5: iptables: 3458] |
| [ 8.645777] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_print_frame |
| [ 8.645798] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] TX 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 |
| [ 8.645808] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] +------------------------------------------------------------ |
| [ 8.645819] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx00 | -1 -2 -2 -3 -1 -3 -3 -3 -1 -5 -3 -5 -4 -4 -5 |
| [ 8.645829] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx01 | 0 -1 0 0 3 0 2 1 -1 1 1 -1 -3 -2 -4 |
| [ 8.645839] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx02 | -2 0 -1 1 4 3 3 3 3 2 2 -1 0 -2 -1 |
| [ 8.645848] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx03 | -2 -2 -2 2 2 3 1 3 1 2 1 0 -1 -2 -4 |
| [ 8.645858] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx04 | -2 0 3 2 6 3 4 4 6 4 4 2 0 -1 0 |
| [ 8.645867] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx05 | -2 -1 -1 3 6 2 4 4 3 3 3 0 -1 -2 -3 |
| [ 8.645877] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx06 | 1 0 2 4 6 4 6 4 6 5 6 3 1 -1 -1 |
| [ 8.645886] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx07 | -2 -1 2 1 3 3 3 3 4 4 4 2 2 -2 -3 |
| [ 8.645896] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx08 | 0 0 1 3 8 4 4 3 5 4 5 2 2 -2 -2 |
| [ 8.645905] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx09 | -2 -1 1 3 4 2 4 4 3 3 3 1 0 -4 -2 |
| [ 8.645915] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx10 | -2 -2 2 2 6 2 4 4 4 4 4 2 0 -2 -2 |
| [ 8.645925] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx11 | -2 -3 1 3 5 2 3 3 4 2 4 2 0 -3 -4 |
| [ 8.645934] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx12 | -2 -2 -2 3 4 2 4 4 3 5 5 1 -1 -1 -1 |
| [ 8.645943] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx13 | -2 -1 0 2 4 4 6 4 6 4 4 0 -2 -1 -3 |
| [ 8.645953] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx14 | 0 2 2 5 6 6 6 6 6 6 6 2 2 0 -2 |
| [ 8.645963] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx15 | 2 3 3 5 9 6 6 6 7 6 6 5 4 2 2 |
| [ 8.645972] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx16 | -2 0 2 4 5 3 5 3 5 3 5 2 0 0 -2 |
| [ 8.645982] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx17 | -1 1 2 2 7 5 6 3 4 4 4 2 2 0 -2 |
| [ 8.645992] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx18 | 2 2 2 5 8 5 5 6 6 4 6 6 4 0 2 |
| [ 8.646002] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx19 | 0 0 4 6 7 7 7 9 7 4 7 4 3 1 1 |
| [ 8.646011] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx20 | 2 3 4 8 7 9 7 8 6 6 8 4 4 2 2 |
| [ 8.646021] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx21 | 0 0 4 6 7 5 7 7 5 7 6 3 3 1 -1 |
| [ 8.646031] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx22 | 2 4 3 5 9 6 9 6 8 5 7 5 3 3 1 |
| [ 8.646041] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx23 | 0 2 2 4 7 3 6 6 6 5 5 3 3 1 -1 |
| [ 8.646051] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx24 | 2 2 4 6 7 6 5 7 8 5 6 5 3 1 -1 |
| [ 8.646060] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx25 | -2 0 2 4 6 5 7 6 6 7 6 3 2 1 0 |
| [ 8.646070] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx26 | 3 2 3 7 10 5 8 8 10 8 8 6 4 4 4 |
| [ 8.646080] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx27 | -1 -1 -1 4 3 3 2 5 4 5 4 1 2 -2 0 |
| [ 8.646089] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx28 | 3 2 4 2 4 4 6 8 3 5 5 3 2 1 3 |
| [ 8.646098] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx29 | 3 3 3 3 4 5 0 4 5 5 3 3 4 4 6 |
| [ 8.646229] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_run_rawdata_all: mutual 3 : Max/Min 10,-4 ## |
| [ 8.651326] [7: ip6tables: 3459] !@iptables_log: command error exit (2) |
| [ 8.651423] [7: ip6tables: 3459] !@iptables_log: 20170128-12:26:40 [3002,3459] /system/bin/ip6tables -w -t filter -D |
| [ 8.651423] [7: ip6tables: 3459] |
| [ 8.667657] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] minority_report_calculate_rawdata min:-5,max:10,node gap:7 =>0 |
| [ 8.667673] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_read_frame: type 5 |
| [ 8.690266] [7: iptables: 3464] audit: audit_lost=87 audit_rate_limit=20 audit_backlog_limit=64 |
| [ 8.690277] [7: iptables: 3464] audit: rate limit exceeded |
| [ 8.771754] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_print_frame |
| [ 8.771776] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] TX 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 |
| [ 8.771786] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] +------------------------------------------------------------ |
| [ 8.771797] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx00 | 2 0 -4 -2 -4 -2 -4 -2 2 -4 0 -2 -1 -3 1 |
| [ 8.771807] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx01 | 4 0 -2 2 0 0 2 2 1 1 3 1 0 -4 4 |
| [ 8.771817] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx02 | 0 2 -2 4 5 3 3 3 4 2 4 2 4 -2 4 |
| [ 8.771827] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx03 | -1 1 -3 5 2 4 2 4 5 1 3 1 2 0 2 |
| [ 8.771837] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx04 | 1 3 1 5 4 2 4 2 7 5 5 5 1 -1 3 |
| [ 8.771846] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx05 | 0 2 -4 6 3 5 3 3 6 4 4 2 1 -3 3 |
| [ 8.771856] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx06 | 2 4 0 6 2 6 4 4 8 4 6 6 4 -2 4 |
| [ 8.771865] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx07 | 0 2 0 6 3 3 3 5 6 4 6 4 3 -1 1 |
| [ 8.771875] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx08 | 0 2 0 6 7 5 3 3 5 3 5 5 6 -4 2 |
| [ 8.771884] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx09 | -1 1 1 5 4 2 4 6 5 3 3 3 4 -2 4 |
| [ 8.771893] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx10 | 0 2 0 6 5 3 5 5 6 4 6 4 3 -3 3 |
| [ 8.771903] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx11 | 0 0 0 4 5 3 3 3 4 2 4 2 4 -4 2 |
| [ 8.771912] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx12 | 1 1 -1 9 4 2 4 6 7 5 7 3 2 0 4 |
| [ 8.771922] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx13 | -1 1 -1 7 5 3 5 5 7 7 5 3 2 -2 4 |
| [ 8.771931] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx14 | 1 5 1 7 5 5 5 7 8 6 6 4 4 0 4 |
| [ 8.771941] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx15 | 3 5 1 9 7 7 5 7 11 7 7 9 7 1 7 |
| [ 8.771950] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx16 | 4 2 0 6 3 7 5 3 5 3 5 5 1 1 1 |
| [ 8.771959] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx17 | 1 3 3 7 6 6 6 6 6 6 6 6 4 2 2 |
| [ 8.771969] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx18 | 3 5 1 9 6 6 4 8 9 5 7 9 6 2 4 |
| [ 8.771978] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx19 | 2 2 2 6 7 7 7 9 8 4 6 6 4 2 4 |
| [ 8.771988] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx20 | 2 4 4 10 7 9 7 7 7 5 7 7 7 3 5 |
| [ 8.771997] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx21 | 4 4 4 8 5 7 7 7 10 8 8 6 5 3 5 |
| [ 8.772007] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx22 | 2 4 2 8 6 6 8 8 9 7 9 9 6 4 6 |
| [ 8.772016] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx23 | 3 3 1 7 8 4 4 8 7 5 7 7 6 0 4 |
| [ 8.772026] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx24 | 4 4 4 8 7 7 7 9 9 7 7 7 4 4 4 |
| [ 8.772035] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx25 | 4 4 2 6 6 8 6 8 7 5 9 5 7 1 5 |
| [ 8.772045] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx26 | 5 3 3 7 10 8 6 8 12 10 10 8 6 4 6 |
| [ 8.772054] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx27 | 2 2 0 4 4 4 2 6 7 5 7 3 4 2 6 |
| [ 8.772063] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx28 | 4 2 2 4 1 3 5 5 5 3 5 1 4 0 6 |
| [ 8.772073] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx29 | 5 5 3 5 4 6 2 4 6 4 4 6 7 7 9 |
| [ 8.772753] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_run_rawdata_all: mutual 5 : Max/Min 12,-4 ## |
| [ 8.795672] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_read_frame: type 29 |
| [ 8.855781] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] execute_selftest: Self test start! |
| [ 8.875800] [5: init: 1] init: [PDP] -- Start PDP [LEDstate] mode --------------------------------- |
| [ 8.875980] [5: init: 1] init: [PDP]!CheckFILE : [ da a/ dp bk p/ dp bk p/ dp bk p/ dp li t. xt] is Not Exist |
| [ 8.876002] [5: init: 1] init: [PDP] -- End of PDP |
| [ 8.911273] [6: system_server: 3390] !@Selected wakeup count |
| [ 8.921820] [6: system_server: 3390] !@ USE_STATIC_LIGHTS_HAL |
| [ 8.921820] [6: system_server: 3390] |
| [ 8.921851] [6: system_server: 3390] !@ lights hal name : Samsung lights Module |
| [ 8.921851] [6: system_server: 3390] |
| [ 8.921884] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[0][0] : /sys/class/leds/lcd-backlight/brightness |
| [ 8.921884] [6: system_server: 3390] |
| [ 8.921944] [6: system_server: 3390] !@ initialize_fds : g_lights_fds Open error! : [2] |
| [ 8.921944] [6: system_server: 3390] |
| [ 8.921965] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[0][1] : /sys/class/backlight/panel/brightness |
| [ 8.921965] [6: system_server: 3390] |
| [ 8.922140] [6: system_server: 3390] !@ initialize_fds : FOUND! : 0x5c |
| [ 8.922140] [6: system_server: 3390] |
| [ 8.922168] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[1][0] : /sys/class/backlight/panel_1/brightness |
| [ 8.922168] [6: system_server: 3390] |
| [ 8.922205] [6: system_server: 3390] !@ initialize_fds : g_lights_fds Open error! : [2] |
| [ 8.922205] [6: system_server: 3390] |
| [ 8.922232] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[1][1] : (null) |
| [ 8.922232] [6: system_server: 3390] |
| [ 8.922252] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[2][0] : /sys/class/sec/sec_touchkey/brightness |
| [ 8.922252] [6: system_server: 3390] |
| [ 8.922385] [6: system_server: 3390] !@ initialize_fds : FOUND! : 0x5d |
| [ 8.922385] [6: system_server: 3390] |
| [ 8.922408] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[3][0] : /sys/class/sec/sec_touchkey2/brightness |
| [ 8.922408] [6: system_server: 3390] |
| [ 8.922441] [6: system_server: 3390] !@ initialize_fds : g_lights_fds Open error! : [2] |
| [ 8.922441] [6: system_server: 3390] |
| [ 8.922465] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[3][1] : (null) |
| [ 8.922465] [6: system_server: 3390] |
| [ 8.922484] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[4][0] : /sys/class/sec/sec_keypad/brightness |
| [ 8.922484] [6: system_server: 3390] |
| [ 8.922514] [6: system_server: 3390] !@ initialize_fds : g_lights_fds Open error! : [2] |
| [ 8.922514] [6: system_server: 3390] |
| [ 8.922534] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[4][1] : /sys/class/leds/keyboard-backlight/brightness |
| [ 8.922534] [6: system_server: 3390] |
| [ 8.922564] [6: system_server: 3390] !@ initialize_fds : g_lights_fds Open error! : [2] |
| [ 8.922564] [6: system_server: 3390] |
| [ 8.922588] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[4][2] : (null) |
| [ 8.922588] [6: system_server: 3390] |
| [ 8.922608] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[5][0] : /sys/class/sec/led/led_pattern |
| [ 8.922608] [6: system_server: 3390] |
| [ 8.922658] [6: system_server: 3390] !@ initialize_fds : FOUND! : 0x5e |
| [ 8.922658] [6: system_server: 3390] |
| [ 8.922680] [6: system_server: 3390] !@ initialize_fds : g_lights_file_paths[6][0] : /sys/class/sec/led/led_blink |
| [ 8.922680] [6: system_server: 3390] |
| [ 8.922721] [6: system_server: 3390] !@ initialize_fds : FOUND! : 0x5f |
| [ 8.922721] [6: system_server: 3390] |
| [ 8.949194] [7: system_server: 3390] !@Boot: Start PackageManagerService |
| [ 9.011939] [7: system_server: 3488] !@suspend_thread_func: read wakeup_count + |
| [ 9.151930] I[0: surfaceflinger: 2877] mif: LNK-RX(29): f8 eb 1d 00 19 00 00 00 13 05 03 0f 00 0d 0a 41 ... |
| [ 9.151967] I[0: surfaceflinger: 2877] mif: LNK-RX(12): f8 eb 0c 00 08 00 01 00 01 01 03 53 |
| [ 9.151981] I[0: surfaceflinger: 2877] mif: LNK-RX(13): f8 eb 0d 00 09 00 02 00 0d 0f 03 06 00 |
| [ 9.152924] I[0: surfaceflinger: 2877] mif: LNK-RX(12): f8 ec 0c 00 08 00 00 00 01 01 03 53 |
| [ 9.152953] I[0: surfaceflinger: 2877] mif: LNK-RX(13): f8 ec 0d 00 09 00 01 00 0d 0f 03 06 00 |
| [ 9.199567] [5: vold: 2803] sdcardfs: version 3.2.1 |
| [ 9.199636] [5: vold: 2803] sdcardfs: dev_name -> /data/knox/tmp_sdcard |
| [ 9.199646] [5: vold: 2803] sdcardfs: options -> low_uid=0,low_gid=0,gid=0,mask=0077 |
| [ 9.201214] [6: vold: 2803] sdcardfs: created packagelist pkgld/3517 |
| [ 9.201255] [6: vold: 2803] sdcardfs: mounted on top of /data/knox/tmp_sdcard type ext4 |
| [ 9.201946] [6: vold: 2803] sdcardfs: version 3.2.1 |
| [ 9.201956] [6: vold: 2803] sdcardfs: dev_name -> /data/knox/sdcard |
| [ 9.201962] [6: vold: 2803] sdcardfs: options -> low_uid=1000,low_gid=1000,gid=1015,multi_user,mask=0006 |
| [ 9.202081] [7: pkgld: 3517] sdcardfs: read_package_list |
| [ 9.202313] [4: vold: 2803] sdcardfs: created packagelist pkgld/3519 |
| [ 9.202335] [6: pkgld: 3519] sdcardfs: read_package_list |
| [ 9.203213] [6: vold: 2803] sdcardfs: mounted on top of /data/knox/sdcard type ext4 |
| [ 9.204111] [0: vold: 2803] sdcardfs: version 3.2.1 |
| [ 9.204129] [0: vold: 2803] sdcardfs: dev_name -> /data/knox/sdcard |
| [ 9.204139] [0: vold: 2803] sdcardfs: options -> low_uid=1000,low_gid=1000,gid=9997,multi_user,mask=0027 |
| [ 9.207699] [6: vold: 2803] sdcardfs: created packagelist pkgld/3520 |
| [ 9.207740] [6: vold: 2803] sdcardfs: mounted on top of /data/knox/sdcard type ext4 |
| [ 9.207780] [4: pkgld: 3520] sdcardfs: read_package_list |
| [ 9.208379] [6: vold: 2803] sdcardfs: version 3.2.1 |
| [ 9.208388] [6: vold: 2803] sdcardfs: dev_name -> /data/knox/sdcard |
| [ 9.208393] [6: vold: 2803] sdcardfs: options -> low_uid=1000,low_gid=1000,gid=9997,multi_user,mask=0007 |
| [ 9.208525] [2: vold: 2803] sdcardfs: created packagelist pkgld/3521 |
| [ 9.208548] [6: pkgld: 3521] sdcardfs: read_package_list |
| [ 9.208602] [2: vold: 2803] sdcardfs: mounted on top of /data/knox/sdcard type ext4 |
| [ 9.209444] [7: vold: 2803] sdcardfs: version 3.2.1 |
| [ 9.209455] [7: vold: 2803] sdcardfs: dev_name -> /data/knox/secure_fs/enc_media |
| [ 9.209460] [7: vold: 2803] sdcardfs: options -> low_uid=1000,low_gid=1000,gid=9997,multi_user,reserved_mb=20 |
| [ 9.215769] [4: vold: 2803] sdcardfs: created packagelist pkgld/3522 |
| [ 9.215842] [0: pkgld: 3522] sdcardfs: read_package_list |
| [ 9.216664] [4: vold: 2803] sdcardfs: mounted on top of /data/knox/secure_fs/enc_media type ext4 |
| [ 9.234809] [1: init: 1] init: Service 'powersnd' (pid 3032) exited with status 0 |
| [ 9.240061] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_wait_for_ready: 1D, 41, 00, 00, 00, 00, 00, 00 [1] |
| [ 9.240075] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] execute_selftest: Self test done! |
| [ 9.279669] [6: kworker/6:0: 40] |
| [ 9.279684] [6: kworker/6:0: 40] [sec_input] sec_ts : SIG 46, 4C, 45, 53 [sec_input] sec_ts : VER 0, 0, 2, 20 |
| [ 9.279696] [6: kworker/6:0: 40] [sec_input] sec_ts : SIZ 0, 0, 8, 50 [sec_input] sec_ts : CRC AD, 4B, 9E, EC |
| [ 9.279705] [6: kworker/6:0: 40] [sec_input] sec_ts : RES 0, 0, 0, 0 [sec_input] sec_ts : COU 0, 0, 0, 17 |
| [ 9.279714] [6: kworker/6:0: 40] [sec_input] sec_ts : PAS 0, 0, 0, 17 [sec_input] sec_ts : FAI 0, 0, 0, 0 |
| [ 9.279722] [6: kworker/6:0: 40] [sec_input] sec_ts : CHA 0, 0, F, 1E [sec_input] sec_ts : AMB 1, BD, 1, 74 |
| [ 9.279730] [6: kworker/6:0: 40] [sec_input] sec_ts : RXS 0, 0, 0, 0 [sec_input] sec_ts : TXS 0, 0, 0, 0 |
| [ 9.279738] [6: kworker/6:0: 40] [sec_input] sec_ts : RXO 0, 0, 0, 0 [sec_input] sec_ts : TXO 0, 0, 0, 0 |
| [ 9.279746] [6: kworker/6:0: 40] [sec_input] sec_ts : RXG 0, 0, 0, 0 [sec_input] sec_ts : TXG 0, 0, 0, 0 |
| [ 9.279754] [6: kworker/6:0: 40] [sec_input] sec_ts : RXR 0, 0, 0, 0 [sec_input] sec_ts : TXT 0, 0, 0, 0 |
| [ 9.279763] [6: kworker/6:0: 40] [sec_input] sec_ts : RXT 0, 0, 0, 0 [sec_input] sec_ts : TXR 0, 0, 0, 0 |
| [ 9.327686] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_print_frame |
| [ 9.327705] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] TX 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 |
| [ 9.327716] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] +------------------------------------------------------------ |
| [ 9.327728] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx00 | 425 401 393 389 386 384 381 380 378 378 377 377 377 378 372 |
| [ 9.327738] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx01 | 411 406 403 401 398 398 397 397 395 395 396 397 400 403 389 |
| [ 9.327749] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx02 | 407 404 398 397 394 394 392 392 392 392 393 394 397 400 388 |
| [ 9.327758] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx03 | 402 400 394 392 390 390 388 388 388 389 389 390 392 394 385 |
| [ 9.327768] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx04 | 398 398 393 391 390 390 388 388 387 388 388 389 391 394 385 |
| [ 9.327778] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx05 | 396 398 393 392 390 390 388 388 387 388 388 389 391 394 385 |
| [ 9.327788] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx06 | 394 398 393 392 390 390 388 388 387 387 387 389 390 394 384 |
| [ 9.327798] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx07 | 396 400 394 393 391 391 389 389 388 388 388 389 391 394 385 |
| [ 9.327808] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx08 | 398 403 398 396 394 394 391 392 391 391 391 393 394 398 388 |
| [ 9.327818] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx09 | 401 405 400 397 395 395 393 393 392 392 392 394 396 401 389 |
| [ 9.327827] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx10 | 391 396 391 389 388 388 386 386 385 385 385 386 388 391 382 |
| [ 9.327837] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx11 | 394 401 396 393 392 392 390 389 389 389 388 389 392 396 386 |
| [ 9.327847] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx12 | 398 404 401 397 396 395 393 393 392 392 392 393 396 401 389 |
| [ 9.327857] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx13 | 398 405 402 400 397 398 394 394 393 393 393 394 397 401 390 |
| [ 9.327866] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx14 | 398 405 402 400 397 397 394 394 393 394 393 394 397 401 390 |
| [ 9.327876] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx15 | 403 409 405 404 402 402 401 400 398 398 398 400 403 406 394 |
| [ 9.327886] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx16 | 397 405 402 400 397 397 394 394 393 393 393 394 398 402 390 |
| [ 9.327895] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx17 | 403 409 406 404 403 403 401 401 400 400 400 402 404 407 397 |
| [ 9.327905] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx18 | 400 406 403 400 398 398 397 396 394 395 396 397 401 404 393 |
| [ 9.327915] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx19 | 406 412 409 406 405 405 404 403 403 403 403 404 407 410 401 |
| [ 9.327924] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx20 | 401 407 404 401 398 400 397 397 396 397 397 398 402 405 394 |
| [ 9.327934] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx21 | 411 417 414 411 410 410 408 408 407 408 408 409 411 414 406 |
| [ 9.327944] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx22 | 413 420 417 413 412 412 410 410 410 410 410 411 413 416 408 |
| [ 9.327954] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx23 | 410 417 414 410 409 410 408 408 408 409 408 409 411 415 407 |
| [ 9.327963] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx24 | 417 424 422 419 417 417 416 416 416 416 417 418 420 424 416 |
| [ 9.327973] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx25 | 415 422 419 417 415 415 414 414 414 414 415 416 418 422 414 |
| [ 9.327983] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx26 | 417 424 423 420 418 419 418 417 417 417 418 419 422 425 417 |
| [ 9.327992] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx27 | 413 421 421 417 416 416 415 414 414 414 414 416 418 422 414 |
| [ 9.328002] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx28 | 422 432 432 427 427 427 425 424 424 425 425 427 429 432 424 |
| [ 9.328012] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] Rx29 | 434 434 437 432 425 431 430 430 431 432 435 438 441 445 442 |
| [ 9.328105] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0 |
| [ 9.328380] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_run_rawdata_all: mutual 29 : Max/Min 445,382 ## |
| [ 9.359644] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_fix_tmode |
| [ 9.452793] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] read_pressure_data: Type:19, Left: -1, Center: -1, Rignt: -1 |
| [ 9.511964] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] read_pressure_data: Type:0, Left: -1, Center: -1, Rignt: -1 |
| [ 9.571933] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] read_pressure_data: Type:6, Left: -1, Center: -1, Rignt: -1 |
| [ 9.631949] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] read_pressure_data: Type:1, Left: -1, Center: -1, Rignt: -1 |
| [ 9.655638] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_release_tmode |
| [ 9.679635] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_run_rawdata_all: ito : 00 00 00 00 |
| [ 9.679651] [6: kworker/6:0: 40] sec_ts 9-0048: [sec_input] sec_ts_run_rawdata_all: done (noise:0, wet:0)## |
| [ 9.734532] I[0: swapper/0: 0] mif: LNK-RX(12): f8 eb 0c 00 08 00 03 00 05 07 03 00 |
| [ 9.735531] I[0: surfaceflinger: 2877] mif: LNK-RX(13): f8 eb 0d 00 09 00 04 00 05 01 03 80 00 |
| [ 9.737271] I[5: swapper/5: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 00 00 05 02 02 02 |
| [ 9.737652] I[0: surfaceflinger: 2877] mif: LNK-RX(12): f8 eb 0c 00 08 00 05 00 01 07 03 02 |
| [ 9.737678] I[0: surfaceflinger: 2877] mif: LNK-RX(12): f8 ec 0c 00 08 00 02 00 05 07 03 00 |
| [ 9.737716] I[0: surfaceflinger: 2877] mif: LNK-RX(13): f8 ec 0d 00 09 00 03 00 05 01 03 80 00 |
| [ 9.787296] I[0: swapper/0: 0] mif: LNK-RX(12): f8 eb 0c 00 08 00 06 00 05 07 03 00 |
| [ 9.788358] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 07 00 05 01 03 80 00 |
| [ 9.788384] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 08 00 05 01 03 80 00 |
| [ 9.795448] I[0: swapper/0: 0] mif: LNK-RX(12): f8 ec 0c 00 08 00 04 00 01 07 03 02 |
| [ 9.914714] I[0: swapper/0: 0] mif: LNK-RX(12): f8 ec 0c 00 08 00 05 00 05 07 03 00 |
| [ 9.915682] I[0: swapper/0: 0] mif: LNK-RX(13): f8 ec 0d 00 09 00 06 00 05 01 03 80 00 |
| [ 9.915710] I[0: swapper/0: 0] mif: LNK-RX(13): f8 ec 0d 00 09 00 07 00 05 01 03 80 00 |
| [ 9.917681] I[0: swapper/0: 0] mif: LNK-RX(18): f8 eb 12 00 0e 00 09 00 02 16 03 30 30 30 30 30 ... |
| [ 9.917710] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 0a 00 05 02 02 02 00 |
| [ 9.919676] I[6: kworker/u16:6: 3001] mif: LNK-TX(12): f8 eb 0c 00 08 00 01 00 05 02 02 02 |
| [ 9.954950] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 0b 01 05 02 02 02 00 |
| [ 11.647650] [6: kworker/6:0: 40] usb_notify: reserve_state_check booting delay finished |
| [ 11.647666] [6: kworker/6:0: 40] usb_notify: reserve_state_check event=vbus(1) enable=1 |
| [ 11.647672] [6: kworker/6:0: 40] usb_notify: otg_notifier_callback event=vbus(1) |
| [ 11.647686] [7: kworker/u16:6: 3001] usb_notify: otg_notify_state+ event=vbus(1), enable=on |
| [ 11.653729] [7: kworker/u16:6: 3001] usb_notifier: exynos_set_peripheral usb attached |
| [ 11.653743] [7: kworker/u16:6: 3001] usb_notifier: check_usb_vbus_state vbus state = 1 |
| [ 11.654821] [7: kworker/u16:6: 3001] usb_notifier: check_usb_vbus_state: get the 13600000.usb platform_device |
| [ 11.654850] [7: kworker/7:1: 81] dwc3 13600000.dwc3: Turn on gadget dwc3-gadget |
| [ 11.654862] [7: kworker/7:1: 81] exynos-dwc3 13600000.usb: dwc3_exynos_runtime_resume |
| [ 11.654907] [7: kworker/7:1: 81] exynos_usbdrd_utmi_init: +++ |
| [ 11.655643] [5: kworker/u16:6: 3001] usb_notify: otg_notify_state- event=vbus, cable=vbus |
| [ 11.656634] [7: kworker/7:1: 81] exynos_usbdrd_utmi_init: --- |
| [ 11.656685] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_core_init: max speed:3, hibernation:0, nr_scratch:0 |
| [ 11.656695] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_gadget_vbus_session: is_active = 1, softconnect = 1 |
| [ 11.656701] [7: kworker/7:1: 81] usb: dwc3_gadget_run_stop is_on:1 |
| [ 11.656710] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_link_status_check: GUID 0x12345678 |
| [ 11.656716] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_link_status_check: GSTS 0x7e800000 |
| [ 11.656722] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_link_status_check: DCTL 0x00f00000 |
| [ 11.656728] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_link_status_check: GCTL 0x61a92005 |
| [ 11.656734] [7: kworker/7:1: 81] dwc3 13600000.dwc3: dwc3_link_status_check: DSTS 0x00d20004 |
| [ 11.743665] [5: kworker/u16:6: 3001] etspi_work_func_debug ldo: 0, sleep: 0, tz: 1, type: unknown |
| [ 11.757692] I[0: surfaceflinger: 2877] usb: dwc3_gadget_interrupt RESET |
| [ 11.812479] I[0: swapper/0: 0] usb: dwc3_gadget_conndone_interrupt speed:HS |
| [ 11.827070] I[0: swapper/0: 0] usb: GET_DES |
| [ 11.827250] [0: kworker/0:2: 2018] android_work: sent uevent USB_STATE=CONNECTED |
| [ 11.830490] I[0: swapper/0: 0] usb: set_config_number single config num=0 |
| [ 11.830509] I[0: swapper/0: 0] usb: config_buf f->mtp |
| [ 11.830521] I[0: swapper/0: 0] usb: config_buf f->acm |
| [ 11.830531] I[0: swapper/0: 0] usb: config_buf f->adb |
| [ 11.830542] I[0: swapper/0: 0] usb: set_interface_count next_interface_id=4 |
| [ 11.830668] I[0: swapper/0: 0] usb: set_config_number single config num=0 |
| [ 11.830678] I[0: swapper/0: 0] usb: config_buf f->mtp |
| [ 11.830687] I[0: swapper/0: 0] usb: config_buf f->acm |
| [ 11.830697] I[0: swapper/0: 0] usb: config_buf f->adb |
| [ 11.830706] I[0: swapper/0: 0] usb: set_interface_count next_interface_id=4 |
| [ 11.893634] I[0: swapper/0: 0] configfs-gadget gadget: high-speed config #1: c |
| [ 11.893659] I[0: swapper/0: 0] usb: set_config e mtp[0] |
| [ 11.893684] I[0: swapper/0: 0] usb: set_config e acm[1] |
| [ 11.893699] I[0: swapper/0: 0] usb: set_config e acm[2] |
| [ 11.893759] I[0: swapper/0: 0] usb: set_config e adb[3] |
| [ 11.893784] I[0: swapper/0: 0] usb: SET_CON |
| [ 11.893794] I[0: swapper/0: 0] usb: set_config_number single config num=0 |
| [ 11.893950] [0: kworker/0:2: 2018] android_work: sent uevent USB_STATE=CONFIGURED |
| [ 12.233057] [6: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_rdma_trigger[0](0) |
| [ 12.233102] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[0:P] trigger=0 |
| [ 12.233161] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_shutdown[0:P] |
| [ 12.233175] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445af00, 12) |
| [ 12.233189] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_control_bclk_polarity(UAIF0, 0) |
| [ 12.233199] [6: AudioOut_D: 3131] cod3035x 4-0003: (P) cod3035x_dai_shutdown completed |
| [ 12.233270] [6: kworker/6:0: 40] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 12.233432] [6: AudioOut_D: 3131] samsung-abox-rdma 14a51000.abox_rdma: abox_request_cpu_gear(ffffffc870da2010, 12) |
| [ 12.233471] [6: kworker/6:0: 40] cod3035x 4-0003: (*) cod3035x_runtime_suspend |
| [ 12.233477] [6: kworker/6:0: 40] cod3035x 4-0003: (*) cod3035x_disable |
| [ 12.233484] [6: kworker/6:0: 40] cod3035x 4-0003: cod3035x_regulators_disable regulator: 0 |
| [ 12.233493] [6: kworker/6:0: 40] samsung-abox 14a50000.abox: abox_enable_mclk: ABOX_UAIF_CTRL0(ABOX_UAIF2)=00000000 |
| [ 12.233504] [6: kworker/6:0: 40] samsung-abox 14a50000.abox: pm qos request aud: req=800000kHz ret=800000kHz |
| [ 12.233647] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_flush_mixp: flush |
| [ 12.233883] [0: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_rdma_trigger[7](0) |
| [ 12.233972] [0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[3:P] trigger=0 |
| [ 12.234017] I[0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007008, 12) |
| [ 12.234076] I[0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_mif_freq(420000) |
| [ 12.234144] [0: AudioOut_D: 3131] _tfa98xx_mute(): mute:1 [pstream 0, cstream 1, samstream 0] |
| [ 12.234155] [0: AudioOut_D: 3131] _tfa98xx_mute(): mute is triggered |
| [ 12.234167] [0: AudioOut_D: 3131] tfa_update_log: read from blackbox |
| [ 12.234189] [0: AudioOut_D: 3131] [SYNC_IPC] tfadsp_write: size = 10 |
| [ 12.234201] [0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 4) |
| [ 12.234361] I[0: kworker/0:2: 2018] [SYNC_IPC] abox_synchronized_ipc_handler: TFADSP_CMD_WRITE done |
| [ 12.234391] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 12) |
| [ 12.234412] [7: AudioOut_D: 3131] [SYNC_IPC] tfadsp_read: size = 20 |
| [ 12.234419] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 4) |
| [ 12.234431] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.234582] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_change_mif_freq_work_func(420000) |
| [ 12.234604] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.234629] I[0: kworker/0:2: 2018] [SYNC_IPC] abox_synchronized_ipc_handler: TFADSP_CMD_READ DONE size= 20 |
| [ 12.234655] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007007, 12) |
| [ 12.234670] [6: AudioOut_D: 3131] blackbox: data[0] = 0 |
| [ 12.234675] [6: AudioOut_D: 3131] blackbox: data[1] = 0 |
| [ 12.234680] [6: AudioOut_D: 3131] blackbox: data[2] = 0 |
| [ 12.234684] [6: AudioOut_D: 3131] blackbox: data[3] = 0 |
| [ 12.234692] [6: AudioOut_D: 3131] _tfa98xx_mute(): _tfa98xx_mute: stop tfa amp |
| [ 12.234753] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.242618] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_shutdown[3:P] |
| [ 12.242637] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445ac00, 12) |
| [ 12.242710] [6: kworker/6:0: 40] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.242903] [2: AudioOut_D: 3131] samsung-abox-rdma 14a51700.abox_rdma: abox_request_cpu_gear(ffffffc07f516810, 12) |
| [ 12.243039] [2: kworker/2:1: 1963] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.243357] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_flush_sifs1: flush |
| [ 12.243538] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[1:C] trigger=0 |
| [ 12.243553] [7: AudioOut_D: 3131] samsung-abox-wdma 14a52300.abox_wdma: abox_wdma_trigger[3](0) |
| [ 12.243700] I[0: swapper/0: 0] samsung-abox 14a50000.abox: abox_request_cpu_gear(0000000000007008, 12) |
| [ 12.243738] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.243751] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_shutdown[1:C] |
| [ 12.243766] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445ae00, 12) |
| [ 12.243774] [7: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_control_bclk_polarity(UAIF1, 0) |
| [ 12.243866] I[0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_request_mif_freq(420000) |
| [ 12.243889] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.243938] [7: AudioOut_D: 3131] samsung-abox-wdma 14a52300.abox_wdma: abox_request_cpu_gear(ffffffc07f515c10, 12) |
| [ 12.244030] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: abox_change_mif_freq_work_func(420000) |
| [ 12.244050] [0: kworker/0:2: 2018] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.244254] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_trigger[3:C] trigger=0 |
| [ 12.244268] [6: AudioOut_D: 3131] samsung-abox-wdma 14a52400.abox_wdma: abox_wdma_trigger[4](0) |
| [ 12.244396] [6: AudioOut_D: 3131] _tfa98xx_mute(): mute:1 [pstream 0, cstream 0, samstream 0] |
| [ 12.244402] [6: AudioOut_D: 3131] _tfa98xx_mute(): mute is triggered |
| [ 12.244408] [6: AudioOut_D: 3131] _tfa98xx_mute(): _tfa98xx_mute: stop tfa amp |
| [ 12.250237] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_shutdown[3:C] |
| [ 12.250251] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_request_cpu_gear(ffffffc87445ac00, 12) |
| [ 12.250262] [6: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_uaif_control_bclk_polarity(UAIF3, 0) |
| [ 12.250329] [6: kworker/6:0: 40] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.251025] [5: AudioOut_D: 3131] samsung-abox-wdma 14a52400.abox_wdma: abox_request_cpu_gear(ffffffc07f516410, 12) |
| [ 12.251178] [5: kworker/5:1: 1505] samsung-abox 14a50000.abox: pm qos request aud: req=590000kHz ret=590000kHz |
| [ 12.251242] [0: AudioOut_D: 3131] samsung-abox 14a50000.abox: abox_flush_sifm3: flush |
| [ 12.754006] [7: pkgld: 3522] sdcardfs: inotify event: 00000400 |
| [ 12.754021] [7: pkgld: 3522] sdcardfs: inotify event: 00008000 |
| [ 12.754092] [1: pkgld: 3519] sdcardfs: inotify event: 00000400 |
| [ 12.754101] [0: pkgld: 3517] sdcardfs: inotify event: 00000400 |
| [ 12.754112] [0: pkgld: 3517] sdcardfs: inotify event: 00008000 |
| [ 12.754121] [7: pkgld: 3522] sdcardfs: read_package_list |
| [ 12.754133] [1: pkgld: 3519] sdcardfs: inotify event: 00008000 |
| [ 12.754144] [0: pkgld: 3517] sdcardfs: read_package_list |
| [ 12.754175] [1: pkgld: 3519] sdcardfs: read_package_list |
| [ 12.754465] [5: pkgld: 3521] sdcardfs: inotify event: 00000400 |
| [ 12.754474] [4: pkgld: 3520] sdcardfs: inotify event: 00000400 |
| [ 12.754484] [4: pkgld: 3520] sdcardfs: inotify event: 00008000 |
| [ 12.754498] [5: pkgld: 3521] sdcardfs: inotify event: 00008000 |
| [ 12.754517] [4: pkgld: 3520] sdcardfs: read_package_list |
| [ 12.754531] [5: pkgld: 3521] sdcardfs: read_package_list |
| [ 12.830716] [6: system_server: 3390] !@Boot: End PackageManagerService |
| [ 12.856206] [6: system_server: 3390] !@Battery capacity = 280000 |
| [ 12.861007] [2: healthd: 2871] BatteryPropertiesRegistrar: registerListener : start |
| [ 12.863278] [2: healthd: 2871] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 12.864615] [7: healthd: 2871] healthd: battery l=56 v=3874 t=26.8 h=2 st=2 c=0 o=19 ca=404 ct=0 ps=0 hv=0 sec=0 sec=4 chg=a |
| [ 12.864629] [7: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : start |
| [ 12.864641] [7: healthd: 2871] IBatteryPropertiesListener : batteryPropertiesChanged! |
| [ 12.864641] [7: healthd: 2871] : BatteryPropertiesRegistrar: notifyListeners : done |
| [ 12.864817] [7: healthd: 2871] sec_bat_store_attrs: PMS sevice hiccup read done : 0 BatteryPropertiesRegistrar: registerListener : done |
| [ 12.864986] [6: Binder:3390_1: 3418] !@BatteryListener : batteryPropertiesChanged! |
| [ 12.869669] [7: system_server: 3390] !@[BatteryInfo] IOException in readFromFile |
| [ 13.130929] [3: kworker/3:1: 1961] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.130949] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.130961] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.130974] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.130985] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_DATA] |
| [ 13.130997] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 13.131008] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.131096] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.131891] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.133550] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.133571] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000201] |
| [ 13.166748] [6: system_server: 3390] [VIB] haptic_enable : 0 ms |
| [ 13.172576] [6: system_server: 3390] [VIB] intensity_store, intensity = 10000, setting data = 0x5c |
| [ 13.229735] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.229853] [4: kworker/4:1: 1964] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.229870] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.229882] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.229895] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.229907] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_DATA] |
| [ 13.229918] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 13.229930] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.230764] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.233037] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.233059] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000201] |
| [ 13.326112] [5: kworker/5:1: 1505] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.326133] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.326721] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.326958] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.326974] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.326986] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: [CMD:WRITE] |
| [ 13.326998] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: vk_server_write_vault |
| [ 13.327009] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.327821] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.329916] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: write_cvault: There is no updated data in cvault |
| [ 13.329935] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.329950] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000402] |
| [ 13.380044] [7: init: 1] init: Starting service 'ccm'... |
| [ 13.390358] [5: init: 1] init: Starting service 'esecomm'... |
| [ 13.427227] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.427433] [3: kworker/3:1: 1961] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.427450] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.427462] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.427476] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.427489] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_DATA] |
| [ 13.427501] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 13.427515] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.429567] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.434174] [3: kworker/3:1: 1961] Trustonic TEE: f01|ICCC:Trustlet ICCC::Starting |
| [ 13.434199] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.434214] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000201] |
| [ 13.435767] [3: kworker/3:1: 1961] Trustonic TEE: f01|TL ICCC: we got a command: 2 |
| [ 13.435786] [3: kworker/3:1: 1961] Trustonic TEE: f01|ICCC :case ICCC_SAVEDATA_TA |
| [ 13.435798] [3: kworker/3:1: 1961] Trustonic TEE: f01|ICCC : In save data, type = ff200002 , value = 3 |
| [ 13.435809] [3: kworker/3:1: 1961] Trustonic TEE: f01|iccc: ICCC_save_data@# |
| [ 13.435824] [3: kworker/3:1: 1961] Trustonic TEE: f01|ICCC Magic Got is = fffd , ret is = 0 |
| [ 13.435835] [3: kworker/3:1: 1961] Trustonic TEE: f01|ICCC - Iccc_check_lock_status : iccc lock is 0 |
| [ 13.436488] [3: kworker/3:1: 1961] Trustonic TEE: f01|ICCC : Iccc_update_lock :iccc lock is 0 |
| [ 13.447710] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 13.447729] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 13.447741] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 13.447751] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 13.447763] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_init: |
| [ 13.448662] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 13.448678] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 13.448689] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: tamper_fuse_good - process_init, msr_size: 0 |
| [ 13.448701] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 13.448712] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Secure memory is not initialized |
| [ 13.448723] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Uninitialized secure memory |
| [ 13.448735] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000001 |
| [ 13.448747] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000001 |
| [ 13.448759] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 13.448770] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 13.452572] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 13.452591] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 13.452603] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 13.452615] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_init: |
| [ 13.455743] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 13.455761] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: tamper_fuse_good - process_init, msr_size: 449 |
| [ 13.455773] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_CCM: verify RSA signature |
| [ 13.455785] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_CCM: Init for verifying CKM_SHA1_RSA_PKCS type signature |
| [ 13.471766] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_CCM: Verifying signature |
| [ 13.471785] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_CCM: tlApiSignatureVerify() signature valid= 1 |
| [ 13.471798] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: init golden measurement msr_len = 192 |
| [ 13.471810] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: golden_msr_addr : bdaffc00 |
| [ 13.471822] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: successfully written to secure memory |
| [ 13.471833] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Read boot time measurement |
| [ 13.471846] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: compare measurements from boot and golden_msrs |
| [ 13.471858] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Measurements match, now check for license nad kap fuse status |
| [ 13.471869] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 13.471881] [3: kworker/3:1: 1961] Trustonic TEE: e01|read license status is: 0 |
| [ 13.471892] [3: kworker/3:1: 1961] Trustonic TEE: e01|low security mode |
| [ 13.471904] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Measurements match - Initialization complete |
| [ 13.471917] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC: get_sec_TIMA_address iccc_tima_sec_mem_addr : BDA00000 |
| [ 13.471928] [3: kworker/3:1: 1961] Trustonic TEE: e01|iccc: ICCC_save_data@# |
| [ 13.471939] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC Magic Got is = fffd , ret is = 0 |
| [ 13.475884] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC - Iccc_check_lock_status : iccc lock is 4 |
| [ 13.476228] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC : Iccc_update_lock :iccc lock is 4 |
| [ 13.476242] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC : Restriction to update the iccc_lock |
| [ 13.476254] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000001 |
| [ 13.476266] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000001 |
| [ 13.476278] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 13.476290] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 13.538669] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.539033] [4: kworker/4:1: 1964] Trustonic TEE: f01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.539049] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.539062] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.539075] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.539088] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: [CMD:READ_STATE] |
| [ 13.539100] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: vk_server_read_vault |
| [ 13.539111] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: vkmc_read_vault |
| [ 13.539660] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.541322] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.541438] [4: kworker/4:1: 1964] Trustonic TEE: f01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000101] |
| [ 13.637161] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.637289] [3: kworker/3:1: 1961] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.637306] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.637319] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.637332] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.637344] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_DATA] |
| [ 13.637355] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 13.637366] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.638425] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.640121] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.640142] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000201] |
| [ 13.735487] [3: kworker/3:1: 1961] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.735508] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.735648] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.736064] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.736090] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_STATE] |
| [ 13.736101] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 13.736122] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.736407] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.737146] [6: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.738670] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.738688] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000101] |
| [ 13.743721] [4: InputReader: 3595] [sec_input] gpio_keys_gpio_report_event: 114 (0/0) |
| [ 13.743775] [4: InputReader: 3595] [sec_input] gpio_keys_gpio_report_event: 115 (0/0) |
| [ 13.743799] [4: InputReader: 3595] [sec_input] gpio_keys_gpio_report_event: 116 (0/0) |
| [ 13.747265] [6: system_server: 3390] sec_ts 9-0048: [sec_input] pressure_enable_store: Not support pressure[3] |
| [ 13.749367] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_input_open |
| [ 13.749382] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_start_device |
| [ 13.749390] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE |
| [ 13.749400] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_start_device: already power on |
| [ 13.749407] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_set_grip_type: re-init grip(0), edh:0, edg:0, lan:0 |
| [ 13.759677] [4: kworker/u16:4: 1586] [SSP] debug_work_func( 376): (0) - Sensor state: 0x1f24f4176, Reset cnt: 0, Comm fail: 0, Dump cnt : 0, Time out: 0 No event : 0 |
| [ 13.767769] [4: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_input_close |
| [ 13.767808] [4: InputReader: 3595] [sec_input] sec_tclm_position_history: [Now] LCIA1 |
| [ 13.767820] [4: InputReader: 3595] [sec_input] sec_tclm_position_history: [Old] O6 |
| [ 13.767836] [4: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_stop_device |
| [ 13.768181] [4: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_power: off: avdd:off |
| [ 13.768260] [4: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_pinctrl_configure: SUSPEND |
| [ 13.783846] [7: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_input_open |
| [ 13.783861] [7: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_start_device |
| [ 13.783870] [7: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE |
| [ 13.783945] [7: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_power: on: avdd:on |
| [ 13.827366] [7: init: 1] init: [PDP] -- Start PDP [LEDstate] mode --------------------------------- |
| [ 13.827385] [7: init: 1] init: [PDP] Unknown Command(LEDstate) or Condition Check fail (16) |
| [ 13.831501] [2: kworker/2:1: 1963] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 13.831522] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 13.831655] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 13.832946] [5: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 13.833432] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 13.833449] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_DATA] |
| [ 13.833460] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 13.833472] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 13.834268] [7: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 13.836168] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 13.836190] [2: kworker/2:1: 1963] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000201] |
| [ 13.860658] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_wait_for_ready: 09, 00, 10, 00, 00, 00, 00, 00 [0] |
| [ 13.860672] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_start_device: cover open, not send cmd |
| [ 13.860819] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_set_custom_library: Sponge (0x00) |
| [ 13.861072] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_set_grip_type: re-init grip(0), edh:0, edg:0, lan:0 |
| [ 13.861165] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_set_grip_type: re-init grip(0), edh:0, edg:0, lan:0 |
| [ 13.861854] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0 |
| [ 13.885611] [7: system_server: 3390] mdnie mdnie: whiteRGB_store: -3, 0, -3 |
| [ 13.885655] [7: system_server: 3390] mdnie mdnie: AUTO_UI |
| [ 13.886381] [7: system_server: 3390] mdnie mdnie: mode_store: 4 |
| [ 13.886393] [7: system_server: 3390] -30, 17, -102, 53, tune5 |
| [ 13.886400] [7: system_server: 3390] mdnie mdnie: get_panel_coordinate: 2983, 3171, 5 |
| [ 13.886406] [7: system_server: 3390] mdnie mdnie: update_color_position: 5 |
| [ 13.886415] [7: system_server: 3390] mdnie mdnie: update_color_position: 255, 255, 255 |
| [ 13.886449] [7: system_server: 3390] mdnie mdnie: AUTO_UI |
| [ 13.886548] [7: system_server: 3390] mdnie mdnie: scenario_store: 0 |
| [ 13.886579] [7: system_server: 3390] mdnie mdnie: AUTO_UI |
| [ 13.888936] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889033] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889123] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889209] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889301] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889392] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889478] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889571] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889658] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889745] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889853] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.889953] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890044] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890136] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890224] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890309] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890401] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890489] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890584] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890676] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.890764] [0: kworker/0:2: 2018] samsung-abox-dump samsung-abox-dump.20: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok |
| [ 13.896552] [2: system_server: 3390] mdnie mdnie: whiteRGB_store: -3, 0, -3 |
| [ 13.896744] [2: system_server: 3390] mdnie mdnie: AUTO_UI |
| [ 13.936457] [0: MountService: 3623] !@checkLogEnableAtKernel !! |
| [ 13.936819] [0: MountService: 3623] !@ File is not created |
| [ 13.937589] [1: InputReader: 3595] !@Could not open sysfs for EdgeScreen |
| [ 13.937849] [1: InputReader: 3595] !@Could not open sysfs for EdgeScreen |
| [ 13.938405] [0: MountService: 3623] !@checkLogEnableAtKernel !! |
| [ 13.938790] [0: MountService: 3623] !@ File is not created |
| [ 13.940383] [6: InputReader: 3595] abov-touchkey-3x6 10-0020: [sec_input] touchkey_grip_sw_reset data(1) |
| [ 13.940399] [6: InputReader: 3595] abov-touchkey-3x6 10-0020: [sec_input] [TK] abov_grip_sw_reset |
| [ 14.048303] [6: pkgld: 3522] sdcardfs: inotify event: 00000400 |
| [ 14.048319] [6: pkgld: 3522] sdcardfs: inotify event: 00008000 |
| [ 14.048384] [2: pkgld: 3517] sdcardfs: inotify event: 00000400 |
| [ 14.048393] [3: pkgld: 3520] sdcardfs: inotify event: 00000400 |
| [ 14.048404] [3: pkgld: 3520] sdcardfs: inotify event: 00008000 |
| [ 14.048418] [2: pkgld: 3517] sdcardfs: inotify event: 00008000 |
| [ 14.048451] [6: pkgld: 3522] sdcardfs: read_package_list |
| [ 14.048514] [2: pkgld: 3517] sdcardfs: read_package_list |
| [ 14.048520] [3: pkgld: 3520] sdcardfs: read_package_list |
| [ 14.048759] [4: pkgld: 3519] sdcardfs: inotify event: 00000400 |
| [ 14.048768] [5: pkgld: 3521] sdcardfs: inotify event: 00000400 |
| [ 14.048779] [5: pkgld: 3521] sdcardfs: inotify event: 00008000 |
| [ 14.048792] [4: pkgld: 3519] sdcardfs: inotify event: 00008000 |
| [ 14.048811] [5: pkgld: 3521] sdcardfs: read_package_list |
| [ 14.048817] [4: pkgld: 3519] sdcardfs: read_package_list |
| [ 14.208872] [7: init: 1] init: Starting service 'otp'... |
| [ 14.243641] [6: kworker/6:0: 40] flip_cover :certify_hall open |
| [ 14.243661] [6: kworker/6:0: 40] flip_cover :hall open |
| [ 14.243938] [7: InputReader: 3595] [sec_input] sec_cmd_store: push cmd: clear_cover_mode,0 |
| [ 14.243953] [7: InputReader: 3595] [sec_input] sec_cmd_store_function: cmd = clear_cover_mode param = 0 |
| [ 14.243967] [7: InputReader: 3595] sec_ts 9-0048: [sec_input] clear_cover_mode: start clear_cover_mode |
| [ 14.243974] [7: InputReader: 3595] tui cover mode set to 0 |
| [ 14.243981] [7: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_set_cover_type: 0 |
| [ 14.244353] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] sec_ts_set_cover_type: close:0, status:61 |
| [ 14.244363] [6: InputReader: 3595] sec_ts 9-0048: [sec_input] clear_cover_mode: OK |
| [ 14.244525] [6: InputReader: 3595] abov-touchkey-3x6 10-0020: [sec_input] flip_cover_mode_enable : 0 |
| [ 14.244536] [6: InputReader: 3595] abov-touchkey-3x6 10-0020: [sec_input] [TK] abov_sar_only_mode : skip already normal mode |
| [ 14.521031] [7: iptables: 3669] audit: audit_lost=153 audit_rate_limit=20 audit_backlog_limit=64 |
| [ 14.521042] [7: iptables: 3669] audit: rate limit exceeded |
| [ 14.990529] [6: system_server: 3390] !@UsbHostManager KERNEL_LOG_PREFIX: |
| [ 14.992236] [6: system_server: 3390] !@UsbDeviceManager KERNEL_LOG_PREFIX: |
| [ 14.992807] [6: system_server: 3390] !@[UsbDeviceManager] Using QC RNDIS? [false] |
| [ 15.004533] [6: system_server: 3390] usb: acc_open |
| [ 15.004559] [6: system_server: 3390] acc_release |
| [ 15.007782] [6: system_server: 3390] !@UsbPortManager KERNEL_LOG_PREFIX: |
| [ 15.009358] [6: system_server: 3390] !@UsbHostRestrictor KERNEL_LOG_PREFIX: |
| [ 15.012420] [6: system_server: 3390] !@UsbSettingsManager KERNEL_LOG_PREFIX: |
| [ 15.101035] [6: system_server: 3390] [sec_input] sec_cmd_store: push cmd: aod_enable,1 |
| [ 15.101055] [6: system_server: 3390] [sec_input] sec_cmd_store_function: cmd = aod_enable param = 1 |
| [ 15.101070] [6: system_server: 3390] sec_ts 9-0048: [sec_input] aod_enable: 04 |
| [ 15.101078] [6: system_server: 3390] sec_ts 9-0048: [sec_input] sec_ts_set_custom_library: Sponge (0x04) |
| [ 15.179134] [6: smdexe: 2990] mif: misc_open: umts_router (opened 1) by smdexe |
| [ 15.179165] [6: smdexe: 2990] mif: shmem_ioctl: shmem: cmd 0x00005401 |
| [ 15.179171] [6: smdexe: 2990] mif: shmem_ioctl: shmem: ERR! invalid cmd 0x00005401 |
| [ 15.211430] [6: system_server: 3390] [VIB] haptic_enable : 0 ms |
| [ 15.315495] [3: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (10) data1 (127) |
| [ 15.316175] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3969), src (0x01) |
| [ 15.322967] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3968) |
| [ 15.324328] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf09c) |
| [ 15.324344] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (961)mA |
| [ 15.326723] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf0e6), avg current (943)mA |
| [ 15.326741] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5660)% |
| [ 15.328080] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (10) data1 (127) |
| [ 15.328759] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3969), src (0x01) |
| [ 15.332530] [0: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_temperature: temperature (325) |
| [ 15.334526] [0: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 15.337148] [0: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (73) data1 (36) |
| [ 15.350095] [0: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (15) data1 (9) |
| [ 15.350113] [0: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5661) |
| [ 15.350127] [0: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5669), previous soc (5660), diff (0), FG_mode(0) |
| [ 15.352526] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf0e6), avg current (943)mA |
| [ 15.352537] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5669)% |
| [ 15.388200] [4:WifiStateMachin: 3658] slsi_net_open: wlan0 -- Recovery Status:0 |
| [ 15.388255] [4:WifiStateMachin: 3658] /data/misc/conn/.psm.info is not exist. |
| [ 15.388283] [4:WifiStateMachin: 3658] slsi_sm_wlan_service_open: Open WLAN service |
| [ 15.388301] [4:WifiStateMachin: 3658] scsc_mx_service_open: |
| [ 15.388863] [4:WifiStateMachin: 3658] platform_mif_map: Map: virt ffffff8018434000 phys e9000000 |
| [ 15.388908] [4:WifiStateMachin: 3658] platform_mif_register_irq: Registering IRQs |
| [ 15.388930] [4:WifiStateMachin: 3658] platform_mif_register_irq: Registering MBOX irq: 95 flag 0x4 |
| [ 15.389010] [4:WifiStateMachin: 3658] platform_mif_register_irq: Registering WDOG irq: 97 flag 0x4 |
| [ 15.389091] [4:WifiStateMachin: 3658] mx140_file_download_fw: try 0 |
| [ 15.389110] [4:WifiStateMachin: 3658] __mx140_file_download_fw: firmware_variant=mx140 () |
| [ 15.389128] [4:WifiStateMachin: 3658] __mx140_file_download_fw: Load WLBT fw /system/etc/wifi/mx140.bin in shared address ffffff8018434000 |
| [ 15.398189] [5:WifiStateMachin: 3658] fwhdr_parse_v02: hdr_length=188 |
| [ 15.398214] [5:WifiStateMachin: 3658] fwhdr_init: FW HEADER version: hdr_major: 0 hdr_minor: 2 |
| [ 15.398232] [5:WifiStateMachin: 3658] fwhdr_init: FWAPI version: fwapi_major: 0 fwapi_minor: 2 |
| [ 15.406514] [3: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3929) |
| [ 15.406547] [3: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56 |
| [ 15.413299] [3: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3968) |
| [ 15.414621] [3: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (10) data1 (127) |
| [ 15.415290] [3: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3969), src (0x01) |
| [ 15.416609] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf17c) |
| [ 15.416621] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (907)mA |
| [ 15.416629] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 15.446451] [7: kworker/u16:4: 1586] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0x0a, 0x05:0x7f, 0x06:0x7c, 0x07:0xf1, 0x08:0x49, 0x09:0x24, 0x0a:0x84, 0x0b:0x20, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 15.447249] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 15.447263] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_get_battery_info:Vnow(3969mV),Inow(961mA),Imax(1500mA),Ichg(1724mA),SOC(56%),Tbat(276), Tusb(0), Tchg(325),Twpc(0) |
| [ 15.451709] [2: kworker/u16:4: 1586] sec-battery battery: sec_bat_cisd_check: [CISD] iavg: 943, incur: 1500, chgcur: 1700, |
| [ 15.451709] [2: kworker/u16:4: 1586] cc_T: 0, lcd_off_T: 0, passed_T: 0, full_T: 0, chg_end_T: 0, cisd: 0x0 |
| [ 15.455541] [3: kworker/u16:4: 1586] [DEBUG] s2mu004_get_charging_health: S2MU004_CHG_STATUS0 0x63 |
| [ 15.469235] [7:WifiStateMachin: 3658] fw_init: Firmware BUILD_ID: O|2110|2017-12-15 15:14:39 UTC|lassen_s612_lassen_a5_rev02_2017_07 |
| [ 15.469271] [7:WifiStateMachin: 3658] platform_mif_irq_reg_handler: Registering mif int handler mifiintrman_isr+0x0/0xc4 in ffffffc874540818 ffffffc874540818 |
| [ 15.471159] [7:WifiStateMachin: 3658] mxlog_thread_start: Started thread mxlog_thread |
| [ 15.481416] [7:WifiStateMachin: 3658] mxlog_init: Loaded 221293 bytes of log-strings from common/log-strings.bin |
| [ 15.481475] [7:WifiStateMachin: 3658] platform_mif_irq_reg_reset_request_handler: Registering mif reset_request int handler panicmon_isr+0x0/0x64 in ffffffc874540818 ffffffc874540818 |
| [ 15.481489] [7:WifiStateMachin: 3658] platform_mif_reset: SOC_VERSION: product_id 0xe7885000, rev 0x1 |
| [ 15.482438] [7: kworker/u16:4: 1586] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x43, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 15.482457] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0) |
| [ 15.482468] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(PDIC, PDIC, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(PDIC), sleep_mode(0), Cycle(-1) |
| [ 15.482480] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_set_polling: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes |
| [ 15.482486] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_set_polling: Polling time 30/30 sec. |
| [ 15.483286] [7: kworker/7:1: 81] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 15.485979] [4: healthd: 2871] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 15.487431] [4: healthd: 2871] healthd: update cisd_data 0 7 1 3000 3000 0 0 0 0 0 0 0 0 0 0 0 276 222 339 236 0 0 0 0 276 268 325 288 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 3000 3000 0 0 1 0 0 0 0 0 0 0 276 236 325 263 0 0 0 0 276 1000 325 288 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| [ 15.491819] [6: healthd: 2871] healthd: battery l=56 v=3969 t=27.6 h=2 st=2 c=0 o=19 ca=943 ct=0 ps=0 hv=0 sec=0 sec=4 chg=a |
| [ 15.491836] [6: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : start |
| [ 15.491846] [6: healthd: 2871] IBatteryPropertiesListener : batteryPropertiesChanged! |
| [ 15.491846] [6: healthd: 2871] : BatteryPropertiesRegistrar: notifyListeners : done |
| [ 15.492073] [5: Binder:3390_1: 3418] sec_bat_store_attrs: PMS sevice hiccup read done : 0 |
| [ 15.492332] [5: Binder:3390_1: 3418] !@BatteryListener : batteryPropertiesChanged! |
| [ 15.505646] [6: mxlog_thread: 3755] 00003719 Initialized APM IPC Protocol. |
| [ 15.505652] [7: mxmgmt_thread: 3752] mxman_message_handler: Received MM_START_IND message from the firmware, arg=0x10b1 |
| [ 15.505662] [7: mxmgmt_thread: 3752] mxman_print_versions: RF_CHIP_VERSION: 0x10b1: S612 (0xb1), EVT1.0 |
| [ 15.505669] [7: mxmgmt_thread: 3752] mxman_print_versions: WLBT FW: O|2110|2017-12-15 15:14:39 UTC|lassen_s612_lassen_a5_rev02_2017_07 |
| [ 15.505675] [6: mxlog_thread: 3755] 0000373D DEBUG_ARM module is disabled. |
| [ 15.505679] [7: mxmgmt_thread: 3752] mxman_print_versions: WLBT Driver Build Type: User |
| [ 15.505920] [7: mxmgmt_thread: 3752] write_m_test_chip_version_file: cid file wasn't opened |
| [ 15.506447] [4: mxlog_thread: 3755] 0000392C WLBT Initialized early power via APM. |
| [ 15.507241] [7:WifiStateMachin: 3658] mx140_request_file: vfs_stat() failed for /system/etc/wifi/mx140/conf/wlan/platform.txt |
| [ 15.507263] [7:WifiStateMachin: 3658] slsi_print_platform_id: Platform ID file NOT found |
| [ 15.507272] [7:WifiStateMachin: 3658] mx140_release_file: firmp= (null) |
| [ 15.507287] [7:WifiStateMachin: 3658] slsi_mib_open_file: Path to the MIB file : wlan/wlan.hcf |
| [ 15.507921] [7:WifiStateMachin: 3658] slsi_mib_open_file: MIB hash: 0x2a97 |
| [ 15.507939] [7:WifiStateMachin: 3658] slsi_sm_wlan_service_start: Recovery -- Status:0 In_Progress:0 -- cm_if_state:2 |
| [ 15.507949] [7:WifiStateMachin: 3658] slsi_sm_wlan_service_start: Kernel config debug options are enabled. This might impact the throughput performance. |
| [ 15.507957] [7:WifiStateMachin: 3658] slsi_sm_wlan_service_start: Allocate mifram |
| [ 15.507977] [7:WifiStateMachin: 3658] slsi_sm_wlan_service_start: Start HIP |
| [ 15.508013] [7:WifiStateMachin: 3658] hip4_init: Loading MIB into shared memory, size (3446) |
| [ 15.508021] [7:WifiStateMachin: 3658] hip4_init: Loading MIB into shared memory, size (3446) |
| [ 15.508033] [7:WifiStateMachin: 3658] slsi_sm_wlan_service_start: Starting WLAN service |
| [ 15.508040] [7:WifiStateMachin: 3658] scsc_mx_service_start: |
| [ 15.508887] [7: mxlog_thread: 3755] 0000442F WLBT LDO32 setup via APM. |
| [ 15.517375] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Starting. |
| [ 15.517395] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.517419] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Making a local copy of sendmsg. |
| [ 15.517432] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: we got a command: commandId=0. |
| [ 15.517445] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Checking if sendmsg and respmsg are from WSM. |
| [ 15.517457] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: sendmsg is pointing to WSM. |
| [ 15.517468] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: respmsg is pointing to WSM. |
| [ 15.517481] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: process_cmd Start , Command : 0 |
| [ 15.517492] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_INIT : ENTER |
| [ 15.517503] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_init:: ENTER |
| [ 15.517515] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_validate_boot_measurements:: ENTER |
| [ 15.517530] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: tlApiSecGetTimaAddr Error!: (%d)1857c |
| [ 15.517542] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Initialize failed - tamper fuse set |
| [ 15.517558] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_validate_boot_measurements:: Success |
| [ 15.517571] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_init:: SUCCESSFUL |
| [ 15.517587] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_INIT return = 0 |
| [ 15.517604] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_INIT : Successful. |
| [ 15.517616] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: tlMain Successful err = 0 |
| [ 15.517630] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.527105] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Starting. |
| [ 15.527739] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.527758] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Making a local copy of sendmsg. |
| [ 15.527772] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: we got a command: commandId=6. |
| [ 15.527785] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Checking if sendmsg and respmsg are from WSM. |
| [ 15.527797] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: sendmsg is pointing to WSM. |
| [ 15.527808] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: respmsg is pointing to WSM. |
| [ 15.529100] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: process_cmd Start , Command : 6 |
| [ 15.529117] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA : ENTER |
| [ 15.529130] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA : data_type = hmac_key |
| [ 15.529142] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data:: ENTER |
| [ 15.529153] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_unwrap: ENTER |
| [ 15.529165] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_unwrap: src_len = 124 |
| [ 15.529177] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_file_handler::otp_unwrap | Producer TA is OTP |
| [ 15.529190] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_unwrap: (unwrapped) dest_len = 32 |
| [ 15.529202] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_file_handler::otp_unwrap | Successful |
| [ 15.529216] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data | otp_unwrap CALL [err=0] |
| [ 15.529229] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data | hmac_data len = 32 |
| [ 15.529241] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data:: SUCCESSFUL |
| [ 15.529253] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA return = 0 |
| [ 15.529268] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA : Successful. |
| [ 15.529280] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: tlMain Successful err = 0 |
| [ 15.529294] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.538634] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Starting. |
| [ 15.539750] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.539770] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Making a local copy of sendmsg. |
| [ 15.539784] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: we got a command: commandId=6. |
| [ 15.539797] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Checking if sendmsg and respmsg are from WSM. |
| [ 15.539810] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: sendmsg is pointing to WSM. |
| [ 15.539823] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: respmsg is pointing to WSM. |
| [ 15.539836] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: process_cmd Start , Command : 6 |
| [ 15.539847] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA : ENTER |
| [ 15.539862] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA : data_type = hmac_key |
| [ 15.539874] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data:: ENTER |
| [ 15.539886] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_unwrap: ENTER |
| [ 15.539900] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_unwrap: src_len = 124 |
| [ 15.539912] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_file_handler::otp_unwrap | Producer TA is OTP |
| [ 15.539925] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_unwrap: (unwrapped) dest_len = 32 |
| [ 15.539937] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_file_handler::otp_unwrap | Successful |
| [ 15.539951] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data | otp_unwrap CALL [err=0] |
| [ 15.540356] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data | hmac_data len = 32 |
| [ 15.540369] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_get_db_hmac_data:: SUCCESSFUL |
| [ 15.540382] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA return = 0 |
| [ 15.540394] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_GET_DB_HMAC_DATA : Successful. |
| [ 15.540407] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: tlMain Successful err = 0 |
| [ 15.540418] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.551024] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Starting. |
| [ 15.551052] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.551578] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Making a local copy of sendmsg. |
| [ 15.551638] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: we got a command: commandId=5. |
| [ 15.551651] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Checking if sendmsg and respmsg are from WSM. |
| [ 15.551662] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: sendmsg is pointing to WSM. |
| [ 15.551675] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: respmsg is pointing to WSM. |
| [ 15.551689] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: process_cmd Start , Command : 5 |
| [ 15.552000] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_SET_DB_HMAC_DATA : ENTER |
| [ 15.552947] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_SET_DB_HMAC_DATA : data_type = hmac_value |
| [ 15.552976] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_set_db_hmac_data:: ENTER |
| [ 15.552989] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_wrap: ENTER |
| [ 15.553002] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_wrap: src_len = 28 |
| [ 15.553017] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA_OTP otp_wrap: (wrapped) dest_len = 120 |
| [ 15.553029] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_file_handler::otp_wrap | Successful |
| [ 15.553042] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_set_db_hmac_data | otp_wrap CALL [err=0] |
| [ 15.553056] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_set_db_hmac_data | wrapped_data len = 120 |
| [ 15.553068] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_set_db_hmac_data:: SUCCESSFUL |
| [ 15.553081] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_SET_DB_HMAC_DATA return = 0 |
| [ 15.553094] [3: kworker/3:1: 1961] Trustonic TEE: e01|otp_cmd_handler :: OTP_SET_DB_HMAC_DATA : Successful. |
| [ 15.553106] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: tlMain Successful err = 0 |
| [ 15.553118] [3: kworker/3:1: 1961] Trustonic TEE: e01|TA OTP: Wait for Notification. |
| [ 15.597477] [6: system_server: 3390] !@ SPECIFIC_HBM_FEATURE = false, hbmLevelLimit = |
| [ 15.608196] [5:PhotonicModulat: 3762] lcd panel: brightness: 128, bl: 53, nit: 183, lx: -1 |
| [ 15.619231] [5: mxmgmt_thread: 3752] srv_message_handler: Received SM_MSG_START_CFM message service=ffffffc859b41280 with service_id=1 from the firmware |
| [ 15.619429] [7:WifiStateMachin: 3658] sap_mlme_version_supported: Reported version: 14.0 |
| [ 15.619444] [7:WifiStateMachin: 3658] sap_ma_version_supported: Reported version: 14.0 |
| [ 15.619453] [7:WifiStateMachin: 3658] sap_dbg_version_supported: Reported version: 13.3 |
| [ 15.619461] [7:WifiStateMachin: 3658] sap_test_version_supported: Reported version: 14.0 |
| [ 15.619490] [7:WifiStateMachin: 3658] slsi_mib_open_file: Path to the MIB file : wlan/localmib.hcf |
| [ 15.619545] [7:WifiStateMachin: 3658] mx140_request_file: vfs_stat() failed for /system/etc/wifi/mx140/conf/wlan/localmib.hcf |
| [ 15.624740] [6: kworker/u16:0: 6] slsi_rx_debug: FAULT_IND: |cpu PHY|id 0x000E|arg 0x000001D7|count 1|timestamp 67205| |
| [ 15.624811] [6:WifiStateMachin: 3658] slsi_start: === Version info from the [MIB] === |
| [ 15.624822] [6:WifiStateMachin: 3658] slsi_start: HW Version : 0xA300 (41728) |
| [ 15.624832] [6:WifiStateMachin: 3658] slsi_start: Platform : 0x0017 (23) |
| [ 15.624842] [6:WifiStateMachin: 3658] slsi_cfg80211_update_wiphy: BANDS SUPPORTED -> 2.4:'Y' 5:'Y' |
| [ 15.624852] [6:WifiStateMachin: 3658] slsi_cfg80211_update_wiphy: HT/VHT SUPPORTED -> HT:'Y' VHT:'Y' |
| [ 15.624860] [6:WifiStateMachin: 3658] slsi_cfg80211_update_wiphy: HT -> cap:0x016f ampdu_density:5 ampdu_factor:3 |
| [ 15.624869] [6:WifiStateMachin: 3658] slsi_cfg80211_update_wiphy: VHT -> cap:0x03007131 |
| [ 15.628852] [2: servicemanager: 2876] binder: 2876:2876 BC_REQUEST_DEATH_NOTIFICATION death notification already set |
| [ 15.634497] [4:WifiStateMachin: 3658] mx140_request_file: vfs_stat() failed for /system/etc/wifi/conf/wlan/mac.txt |
| [ 15.634953] [4:WifiStateMachin: 3658] slsi_get_hw_mac_address: MAC address loaded from /efs/wifi/.mac.info: BC:54:51:40:74:0E |
| [ 15.641907] [1: init: 1] init: Starting service 'p2p_supplicant'... |
| [ 15.653768] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.655777] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.655795] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.655807] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.655819] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_init: |
| [ 15.655831] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 15.655842] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 15.655854] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: tamper_fuse_good - process_init, msr_size: 0 |
| [ 15.655865] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 15.655876] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Measurement size is : 192 |
| [ 15.655887] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Read boot time measurement |
| [ 15.655899] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: compare measurements from boot and golden_msrs |
| [ 15.655911] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Measurements match, now check for license nad kap fuse status |
| [ 15.655923] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 15.655934] [2: kworker/2:1: 1963] Trustonic TEE: e01|read license status is: 0 |
| [ 15.655944] [2: kworker/2:1: 1963] Trustonic TEE: e01|low security mode |
| [ 15.655956] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Measurements match - Initialization complete |
| [ 15.655968] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC: get_sec_TIMA_address iccc_tima_sec_mem_addr : BDA00000 |
| [ 15.655978] [2: kworker/2:1: 1963] Trustonic TEE: e01|iccc: ICCC_save_data@# |
| [ 15.655989] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC Magic Got is = fffd , ret is = 0 |
| [ 15.656612] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC - Iccc_check_lock_status : iccc lock is 4 |
| [ 15.656632] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC : Iccc_update_lock :iccc lock is 4 |
| [ 15.656644] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC : Restriction to update the iccc_lock |
| [ 15.656655] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000001 |
| [ 15.656667] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000001 |
| [ 15.656679] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.656690] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.677024] [5:SdpManagerServi: 3765] Trustonic TEE: mcp_cmd: open session: res 4/ret -16 |
| [ 15.689735] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.691475] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.691492] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.691503] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.691514] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_init: |
| [ 15.691526] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 15.691537] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 15.691549] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: tamper_fuse_good - process_init, msr_size: 0 |
| [ 15.691560] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 15.691571] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Measurement size is : 192 |
| [ 15.691615] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Read boot time measurement |
| [ 15.691628] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: compare measurements from boot and golden_msrs |
| [ 15.691640] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Measurements match, now check for license nad kap fuse status |
| [ 15.691653] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 15.691664] [3: kworker/3:1: 1961] Trustonic TEE: e01|read license status is: 0 |
| [ 15.691674] [3: kworker/3:1: 1961] Trustonic TEE: e01|low security mode |
| [ 15.691687] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Measurements match - Initialization complete |
| [ 15.691699] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC: get_sec_TIMA_address iccc_tima_sec_mem_addr : BDA00000 |
| [ 15.691710] [3: kworker/3:1: 1961] Trustonic TEE: e01|iccc: ICCC_save_data@# |
| [ 15.691721] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC Magic Got is = fffd , ret is = 0 |
| [ 15.691732] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC - Iccc_check_lock_status : iccc lock is 4 |
| [ 15.691743] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC : Iccc_update_lock :iccc lock is 4 |
| [ 15.691755] [3: kworker/3:1: 1961] Trustonic TEE: e01|ICCC : Restriction to update the iccc_lock |
| [ 15.691767] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000001 |
| [ 15.691778] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000001 |
| [ 15.691791] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.691802] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.700773] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.701572] [7: system_server: 3390] !@Led Charging Settings = true |
| [ 15.701622] [7: system_server: 3390] !@Led Low Battery Settings = true |
| [ 15.702107] [7: system_server: 3390] !@AdaptiveFastCharging Settings = true |
| [ 15.702294] [7: system_server: 3390] [MUIC] s2mu004_muic_show_afc_disable AFC ENABLE |
| [ 15.702392] [7: system_server: 3390] !@[BatteryInfo] readFromFile /sys/class/sec/switch/afc_disable: 0 |
| [ 15.702703] [7: system_server: 3390] !@WirelessFastCharging Settings = true |
| [ 15.702934] [7: system_server: 3390] sec_bat_store_attrs: x : 2 |
| [ 15.702942] [7: system_server: 3390] sec_bat_store_attrs: sec_set_param failed |
| [ 15.704950] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.704968] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.704980] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.704991] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.705003] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.705014] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.705025] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.705037] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.705049] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.705061] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.705072] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.714487] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.715700] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.715720] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.715731] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.715743] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.715754] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.715766] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.715941] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.715956] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.716208] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.716223] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.716237] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.739386] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.739653] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.739666] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.739677] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.739690] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.739702] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.740256] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.740269] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.740285] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.740297] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.740309] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.740320] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.748246] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.749311] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.749328] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.749340] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.749351] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.749362] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.749374] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.749386] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.749398] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.749409] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.749421] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.749432] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.756684] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.757586] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.757599] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.757610] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.757622] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.757633] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.757645] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.757657] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.757668] [4: kworker/4:1: 1964] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.757680] [4: kworker/4:1: 1964] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.757691] [4: kworker/4:1: 1964] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.757703] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.765681] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.766351] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.766371] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.766382] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.766394] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_unwrap_key: |
| [ 15.766406] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 15.767725] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 15.767743] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 15.767755] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Measurement size is : 192 |
| [ 15.767767] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: tz_keystore_chk_boot_msr , after read_golden_measurement |
| [ 15.767779] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: tz_keystore_chk_boot_msr , after boot_measurement |
| [ 15.767791] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: tz_keystore_chk_boot_msr done |
| [ 15.767802] [3: kworker/3:1: 1961] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 15.767813] [3: kworker/3:1: 1961] Trustonic TEE: e01|read license status is: 0 |
| [ 15.767824] [3: kworker/3:1: 1961] Trustonic TEE: e01|low security mode |
| [ 15.768383] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: TZ_aes_decrypt decryption key length: 32, ciphertext length: 48 |
| [ 15.768399] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: decrypt_data() finished; plaintext length is 43 |
| [ 15.768411] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000005 |
| [ 15.768423] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000005 |
| [ 15.768434] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.768447] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.783125] [5: kworker/5:1: 1505] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.783692] [1: kworker/1:2: 2019] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.783712] [1: kworker/1:2: 2019] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.783723] [1: kworker/1:2: 2019] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.783735] [1: kworker/1:2: 2019] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_init: |
| [ 15.783749] [1: kworker/1:2: 2019] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 15.785371] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 15.785390] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: tamper_fuse_good - process_init, msr_size: 0 |
| [ 15.785402] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 15.785413] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Measurement size is : 192 |
| [ 15.785425] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Read boot time measurement |
| [ 15.785437] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: compare measurements from boot and golden_msrs |
| [ 15.785449] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Measurements match, now check for license nad kap fuse status |
| [ 15.785461] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 15.785472] [2: kworker/2:1: 1963] Trustonic TEE: e01|read license status is: 0 |
| [ 15.785483] [2: kworker/2:1: 1963] Trustonic TEE: e01|low security mode |
| [ 15.785495] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Measurements match - Initialization complete |
| [ 15.785506] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC: get_sec_TIMA_address iccc_tima_sec_mem_addr : BDA00000 |
| [ 15.785517] [2: kworker/2:1: 1963] Trustonic TEE: e01|iccc: ICCC_save_data@# |
| [ 15.785529] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC Magic Got is = fffd , ret is = 0 |
| [ 15.785540] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC - Iccc_check_lock_status : iccc lock is 4 |
| [ 15.785551] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC : Iccc_update_lock :iccc lock is 4 |
| [ 15.785563] [2: kworker/2:1: 1963] Trustonic TEE: e01|ICCC : Restriction to update the iccc_lock |
| [ 15.785574] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000001 |
| [ 15.785586] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000001 |
| [ 15.785598] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.785609] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.796482] [0: wpa_supplicant: 3768] slsi_net_open: p2p0 -- Recovery Status:0 |
| [ 15.796614] [0: wpa_supplicant: 3768] /data/misc/conn/.psm.info is not exist. |
| [ 15.796906] [0: wpa_supplicant: 3768] IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready |
| [ 15.800302] [7: system_server: 3390] !@UsbService:systemReady() |
| [ 15.811223] [1: sdcard: 3791] sdcardfs: version 3.2.1 |
| [ 15.811246] [1: sdcard: 3791] sdcardfs: dev_name -> /data/media |
| [ 15.811257] [1: sdcard: 3791] sdcardfs: options -> low_uid=1023,low_gid=1023,multi_user,reserved_mb=20,mask=0006,userid=0,gid=1015,label=emulated,type=default |
| [ 15.812471] [1: kworker/1:2: 2019] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.812788] [1: sdcard: 3791] sdcardfs: created packagelist pkgld/3811 |
| [ 15.812959] [1: sdcard: 3791] sdcardfs: mounted on top of /data/media type ext4 |
| [ 15.813126] [2: pkgld: 3811] sdcardfs: read_package_list |
| [ 15.813291] [1: sdcard: 3791] sdcardfs: version 3.2.1 |
| [ 15.813305] [1: sdcard: 3791] sdcardfs: dev_name -> /data/media |
| [ 15.813315] [1: sdcard: 3791] sdcardfs: options -> low_uid=1023,low_gid=1023,multi_user,reserved_mb=20,mask=0027,userid=0,gid=9997,label=emulated,type=read |
| [ 15.814898] [5: sdcard: 3791] sdcardfs: created packagelist pkgld/3812 |
| [ 15.814958] [1: pkgld: 3812] sdcardfs: read_package_list |
| [ 15.814988] [5: sdcard: 3791] sdcardfs: mounted on top of /data/media type ext4 |
| [ 15.815243] [5: sdcard: 3791] sdcardfs: version 3.2.1 |
| [ 15.815260] [5: sdcard: 3791] sdcardfs: dev_name -> /data/media |
| [ 15.815270] [5: sdcard: 3791] sdcardfs: options -> low_uid=1023,low_gid=1023,multi_user,reserved_mb=20,mask=0007,userid=0,gid=9997,label=emulated,type=write |
| [ 15.815506] [5: sdcard: 3791] sdcardfs: created packagelist pkgld/3813 |
| [ 15.815517] [7: pkgld: 3813] sdcardfs: read_package_list |
| [ 15.815634] [5: sdcard: 3791] sdcardfs: mounted on top of /data/media type ext4 |
| [ 15.818333] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.818353] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.818365] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.818376] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_init: |
| [ 15.818389] [4: kworker/4:1: 1964] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 15.818400] [4: kworker/4:1: 1964] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 15.818412] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_COMMON: tamper_fuse_good - process_init, msr_size: 0 |
| [ 15.818423] [4: kworker/4:1: 1964] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 15.818434] [4: kworker/4:1: 1964] Trustonic TEE: e01|TIMA trustlet: Measurement size is : 192 |
| [ 15.818446] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_COMMON: Read boot time measurement |
| [ 15.818458] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_COMMON: compare measurements from boot and golden_msrs |
| [ 15.818470] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_COMMON: Measurements match, now check for license nad kap fuse status |
| [ 15.818481] [4: kworker/4:1: 1964] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 15.818492] [4: kworker/4:1: 1964] Trustonic TEE: e01|read license status is: 0 |
| [ 15.818503] [4: kworker/4:1: 1964] Trustonic TEE: e01|low security mode |
| [ 15.818514] [4: kworker/4:1: 1964] Trustonic TEE: e01|TZ_COMMON: Measurements match - Initialization complete |
| [ 15.818527] [4: kworker/4:1: 1964] Trustonic TEE: e01|ICCC: get_sec_TIMA_address iccc_tima_sec_mem_addr : BDA00000 |
| [ 15.818537] [4: kworker/4:1: 1964] Trustonic TEE: e01|iccc: ICCC_save_data@# |
| [ 15.818549] [4: kworker/4:1: 1964] Trustonic TEE: e01|ICCC Magic Got is = fffd , ret is = 0 |
| [ 15.818560] [4: kworker/4:1: 1964] Trustonic TEE: e01|ICCC - Iccc_check_lock_status : iccc lock is 4 |
| [ 15.818571] [4: kworker/4:1: 1964] Trustonic TEE: e01|ICCC : Iccc_update_lock :iccc lock is 4 |
| [ 15.818582] [4: kworker/4:1: 1964] Trustonic TEE: e01|ICCC : Restriction to update the iccc_lock |
| [ 15.818594] [4: kworker/4:1: 1964] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000001 |
| [ 15.818606] [4: kworker/4:1: 1964] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000001 |
| [ 15.818618] [4: kworker/4:1: 1964] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.818629] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.821151] [4: UsbPortManager: 3717] dual_role_get_local_prop : request prop = 1 , attached_state = 2, power_role_dual = 1 |
| [ 15.821473] [4: UsbPortManager: 3717] dual_role_get_local_prop : request prop = 2 , attached_state = 2, power_role_dual = 1 |
| [ 15.821559] [7: system_server: 3390] usb_notify: usb_hw_param_store - ret : 75 |
| [ 15.821667] [7: system_server: 3390] usb_notify: usb_hw_param_show - ret : 76 |
| [ 15.821732] [4: UsbPortManager: 3717] dual_role_get_local_prop : request prop = 3 , attached_state = 2, power_role_dual = 1 |
| [ 15.835819] [4: kworker/4:1: 1964] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.837246] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.837266] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.837277] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.837289] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.837300] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.837312] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.837324] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.837335] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.837347] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.837358] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.837370] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.849655] [6: system_server: 3390] !@Boot_DEBUG: start networkManagement |
| [ 15.864366] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.869033] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.869053] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.869064] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.869076] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.869087] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.869100] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.869111] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.869123] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.869135] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.869147] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.869158] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.913373] [0: kworker/0:2: 2018] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.915683] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.915703] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.915715] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.915727] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.915739] [3: kworker/3:1: 1961] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.915750] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.915762] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.915774] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.915785] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.915797] [3: kworker/3:1: 1961] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.915808] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.926043] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.927510] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.927531] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.927543] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.927554] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.927566] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.927578] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.927629] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.927641] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.927652] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.927665] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.927676] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.941174] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.942035] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.942054] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.942065] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.942077] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_encrypt_filename: |
| [ 15.942088] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_COMMON: Get filename called |
| [ 15.942100] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: encryption key length: 32, data length: 63 |
| [ 15.942112] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: encrypt_data finished; ciphertext length is 64 |
| [ 15.942124] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000002 |
| [ 15.942135] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000002 |
| [ 15.942147] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.942158] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.944688] [6:WifiStateMachin: 3658] slsi_lls_set_stats: mpdu_size_threshold:128 |
| [ 15.944703] [6:WifiStateMachin: 3658] slsi_lls_set_stats: aggr_stat_gathering:1 |
| [ 15.959065] [3: wpa_supplicant: 3768] wlan0: - slsi_ioctl: Not Supported : PKTLOG_FILTER_ADD 12 0xffff 0x0806 |
| [ 15.960498] [3: kworker/3:1: 1961] Trustonic TEE: e01|TL_TZ_KEYSTORE: Starting |
| [ 15.962290] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Got a message! |
| [ 15.962311] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: we got a command |
| [ 15.962323] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE:tz buildinfo : 36 |
| [ 15.962334] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: process_cmd: CMD_TZ_KEYSTORE_unwrap_key: |
| [ 15.962346] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: get_sec_TIMA_address tima_sec_mem_addr : BDA00000 |
| [ 15.962358] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: warranty okay 13 |
| [ 15.962370] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Reading golden measurement |
| [ 15.962381] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Measurement size is : 192 |
| [ 15.962394] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: tz_keystore_chk_boot_msr , after read_golden_measurement |
| [ 15.962405] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: tz_keystore_chk_boot_msr , after boot_measurement |
| [ 15.962417] [2: kworker/2:1: 1963] Trustonic TEE: e01|TZ_KEYSTORE: tz_keystore_chk_boot_msr done |
| [ 15.962428] [2: kworker/2:1: 1963] Trustonic TEE: e01|TIMA trustlet: Reading knox license status |
| [ 15.962439] [2: kworker/2:1: 1963] Trustonic TEE: e01|read license status is: 0 |
| [ 15.962450] [2: kworker/2:1: 1963] Trustonic TEE: e01|low security mode |
| [ 15.962462] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: TZ_aes_decrypt decryption key length: 32, ciphertext length: 48 |
| [ 15.962474] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ: decrypt_data() finished; plaintext length is 43 |
| [ 15.962486] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: sendmsg->header.id = 0x00000005 |
| [ 15.962498] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.id = 0x80000005 |
| [ 15.962510] [2: kworker/2:1: 1963] Trustonic TEE: e01|Trustlet TL_TZ_KEYSTORE: respmsg->header.status = 0x00000000 |
| [ 15.962521] [2: kworker/2:1: 1963] Trustonic TEE: e01|TL_TZ_KEYSTORE: Returning = 0x00000000 |
| [ 15.967638] [6: kworker/6:0: 40] usb: [M] cable_type_check: usb=528, pd=1 |
| [ 15.967672] [6: kworker/6:0: 40] usb: [M] manager_notifier_notify: src:MANAGER dest:BATTERY id:ID_USB sub1:00 sub2:00 sub3:00 |
| [ 15.967691] [6: kworker/6:0: 40] sec-battery battery: usb_typec_handle_notification: action (3) dump(0x6, 0x2, 0x03, 0x0000, 0x0000, 0x0000) |
| [ 15.967711] [6: kworker/6:0: 40] sec-battery battery: usb_typec_handle_notification: CCIC_NOTIFY_ID_USB: 1 |
| [ 15.967723] [6: kworker/6:0: 40] usb: [M] manager_notifier_notify: notify done(0x0) |
| [ 15.969337] [2: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (10) data1 (127) |
| [ 15.970375] [2: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3969), src (0x01) |
| [ 15.978032] [0: vold: 2803] ecryptfs_parse_options : chamber dirs : Chamber|Vault |
| [ 15.978062] [6: kworker/u16:4: 1586] ecryptfs_parse_options : partition_id : 0 |
| [ 15.980045] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3968) |
| [ 15.981561] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf4ba) |
| [ 15.981576] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (704)mA |
| [ 15.984254] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf12c), avg current (926)mA |
| [ 15.984265] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5669)% |
| [ 15.985774] [6: vold: 2803] ecryptfs_parse_options : chamber dirs : Chamber|Vault |
| [ 15.985790] [6: kworker/u16:4: 1586] ecryptfs_parse_options : partition_id : 1 |
| [ 15.987329] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (10) data1 (127) |
| [ 15.988010] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3969), src (0x01) |
| [ 15.989590] [0:ip6tables-resto: 3877] audit: audit_lost=213 audit_rate_limit=20 audit_backlog_limit=64 |
| [ 15.989611] [0:ip6tables-resto: 3877] audit: rate limit exceeded |
| [ 15.993392] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_temperature: temperature (325) |
| [ 15.995488] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: OTP 4E(6b) 4F(10) current 4E(6b) 4F(10) |
| [ 16.000165] [6: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: [DEBUG]s2mu004_get_rawsoc: data0 (73) data1 (36) |
| [ 16.004188] [0: system_server: 3390] !@Boot_DEBUG: end networkManagement |
| [ 16.019783] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc raw data0 (15) data1 (9) |
| [ 16.019802] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: vm soc (5661) |
| [ 16.019816] [5: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: current_soc (5669), previous soc (5669), diff (0), FG_mode(0) |
| [ 16.022592] [4: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: MONOUT(0xf12c), avg current (926)mA |
| [ 16.022612] [4: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgcurrent: SOC(5669)% |
| [ 16.025295] [2:batterystats-sy: 3463] !@ mLastInfo WifiActivityEnergyInfo{ timestamp=0 mStackState=0 mControllerTxTimeMs=0 mControllerTxTimePerLevelMs=[0] mControllerRxTimeMs=0 mControllerIdleTimeMs=0 mControllerEnergyUsed=0 } |
| [ 16.025450] [2:batterystats-sy: 3463] !@ latest WifiActivityEnergyInfo{ timestamp=16013 mStackState=3 mControllerTxTimeMs=0 mControllerTxTimePerLevelMs=[] mControllerRxTimeMs=0 mControllerIdleTimeMs=0 mControllerEnergyUsed=0 } |
| [ 16.025630] [2:batterystats-sy: 3463] !@ delta timePeriodMs : 16013 txTimeMs : 0 rxTimeMs :0 idleTimeMs : 0 |
| [ 16.036479] [6:SdpManagerServi: 3765] KEK_PACK[3765] find_kek_pack :: Can't find kek-pack : 0 |
| [ 16.037605] [6:SdpManagerServi: 3765] KEK_PACK[3765] find_kek_pack :: Can't find kek-pack : 0 |
| [ 16.040462] [2:batterystats-sy: 3463] !@ mLastInfo WifiActivityEnergyInfo{ timestamp=16013 mStackState=3 mControllerTxTimeMs=0 mControllerTxTimePerLevelMs=[] mControllerRxTimeMs=0 mControllerIdleTimeMs=0 mControllerEnergyUsed=0 } |
| [ 16.041697] [2:batterystats-sy: 3463] !@ latest WifiActivityEnergyInfo{ timestamp=16030 mStackState=3 mControllerTxTimeMs=0 mControllerTxTimePerLevelMs=[] mControllerRxTimeMs=0 mControllerIdleTimeMs=0 mControllerEnergyUsed=0 } |
| [ 16.041839] [2:batterystats-sy: 3463] !@ delta timePeriodMs : 17 txTimeMs : 0 rxTimeMs :0 idleTimeMs : 0 |
| [ 16.075359] [2: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_monout_avgvbat: avgvbat (3932) |
| [ 16.075398] [2: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: UI SOC = 56 |
| [ 16.085124] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_avgvbat: avgvbat (3968) |
| [ 16.086761] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: data0 (10) data1 (127) |
| [ 16.087742] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_vbat: vbat (3969), src (0x01) |
| [ 16.090854] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: rCUR_CC(0xf4ba) |
| [ 16.090866] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_current: current (704)mA |
| [ 16.090874] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_get_rawsoc: Fuelgauge Mode: 0, Force power-off voltage: 3300 |
| [ 16.093127] [0: kworker/0:2: 2018] Trustonic TEE: e01|SKMM_TA [ERROR]: skmm_ta_aes_gcm_decrypt :: wrong MAC value |
| [ 16.114075] [7: kworker/u16:4: 1586] [FG]s2mu004_fg_test_read: 0x00:0x10, 0x01:0x03, 0x02:0x00, 0x03:0x1c, 0x04:0x0a, 0x05:0x7f, 0x06:0xba, 0x07:0xf4, 0x08:0x49, 0x09:0x24, 0x0a:0x84, 0x0b:0x20, 0x0c:0x10, 0x0d:0x00, 0x0e:0x18, 0x0f:0x2e, 0x10:0x86, 0x11:0x0b, 0x12:0x00, 0x13:0x0f, 0x14:0x40, 0x15:0x00, 0x16:0x14, 0x17:0x04, 0x18:0x0c, 0x19:0xb0, 0x1a:0x1a, 0x1b:0x00, 0x1c:0x3c, 0x1d:0xec, 0x1e:0x03, 0x1f:0x00, 0x25:0x10, 0x27:0x50, |
| [ 16.114091] [7: kworker/u16:4: 1586] s2mu004-fuelgauge 5-003b: s2mu004_fg_get_scaled_capacity: capacity_max(1000) scaled capacity(56.6), raw_soc(56.6) |
| [ 16.114104] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_get_battery_info:Vnow(3969mV),Inow(704mA),Imax(1500mA),Ichg(1724mA),SOC(56%),Tbat(276), Tusb(0), Tchg(325),Twpc(0) |
| [ 16.116111] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_cisd_check: [CISD] iavg: 926, incur: 1500, chgcur: 1700, |
| [ 16.116111] [7: kworker/u16:4: 1586] cc_T: 0, lcd_off_T: 0, passed_T: 0, full_T: 0, chg_end_T: 0, cisd: 0x0 |
| [ 16.119968] [6: kworker/u16:4: 1586] [DEBUG] s2mu004_get_charging_health: S2MU004_CHG_STATUS0 0x63 |
| [ 16.144997] [7: kworker/u16:4: 1586] s2mu004_test_read: 0x0a:0x63, 0x0b:0x00, 0x0c:0x03, 0x0d:0x4b, 0x0e:0x3a, 0x0f:0x25, 0x10:0x83, 0x11:0x05, 0x12:0x3a, 0x13:0x25, 0x14:0x10, 0x15:0xdd, 0x16:0x6d, 0x17:0x46, 0x18:0x91, 0x19:0x43, 0x1a:0x0a, 0x1b:0x08, 0x1c:0x12, 0x1d:0x22, 0x1e:0x00, 0x1f:0x4c, 0x20:0x3b, 0x21:0x1d, 0x22:0x55, 0x23:0x55, 0x24:0x05, 0x33:0x95 |
| [ 16.145021] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_temperature: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50) |
| [ 16.145028] [7: kworker/u16:4: 1586] sec_bat_swelling_check: swelling highblock(410), highrecov(390) |
| [ 16.145685] [7: kworker/u16:4: 1586] sec_bat_swelling_check: status(1), swell_mode(0:0:0), cv(4350)mV, temp(276) |
| [ 16.145699] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_fullcharged_check: Charging Mode : Normal |
| [ 16.145705] [7: kworker/u16:4: 1586] sec_bat_set_current_event: current event before(0x4), after(0x0) |
| [ 16.145712] [7: kworker/u16:4: 1586] sec_bat_calculate_safety_time : EXPIRED_TIME(10379197), IP(7500000), CP(7499400), CURR(1724), STANDARD(2150) |
| [ 16.145719] [7: kworker/u16:4: 1586] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(12943894) TIME NOW(16) TIME PREV(2) |
| [ 16.145724] [7: kworker/u16:4: 1586] sec_bat_calculate_safety_time : REMAIN_TIME(10367970) CAL_REMAIN_TIME(12929894) |
| [ 16.145730] [7: kworker/u16:4: 1586] sec_bat_check_mix_temp: mix_limit(0), temp(276), chg_temp(325), input_current(1500) |
| [ 16.145736] [7: kworker/u16:4: 1586] sec_bat_chg_temperature_check: cable_type(19), chg_limit(0) |
| [ 16.145741] [7: kworker/u16:4: 1586] sec_bat_check_pdic_temp: pd_index(0), input_current(1500), chg_limit(0) |
| [ 16.145747] [7: kworker/u16:4: 1586] sec_bat_get_charging_current_by_siop: incurr(1500), chgcurr(1724) |
| [ 16.145755] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0) |
| [ 16.145765] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(PDIC, PDIC, 0, 1), level(100%), slate_mode(0), store_mode(0), HV(PDIC), sleep_mode(0), Cycle(-1) |
| [ 16.145775] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_set_polling: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes |
| [ 16.145782] [7: kworker/u16:4: 1586] sec-battery battery: sec_bat_set_polling: Polling time 10/30 sec. |
| [ 16.146466] [7: kworker/7:1: 81] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 16.150577] [4: healthd: 2871] sec_bat_get_property cable type = 19 sleep_mode = 0 |
| [ 16.152715] [1: healthd: 2871] healthd: battery l=56 v=3969 t=27.6 h=2 st=2 c=0 o=19 ca=926 ct=0 ps=0 hv=0 sec=0 sec=0 chg=u |
| [ 16.152746] [1: healthd: 2871] BatteryPropertiesRegistrar: notifyListeners : start |
| [ 16.152767] [1: healthd: 2871] IBatteryPropertiesListener : batteryPropertiesChanged! |
| [ 16.152767] [1: healthd: 2871] : BatteryPropertiesRegistrar: notifyListeners : done |
| [ 16.153207] [0: Binder:3390_5: 3651] sec_bat_store_attrs: PMS sevice hiccup read done : 0 |
| [ 16.153239] [0: Binder:3390_5: 3651] !@BatteryListener : batteryPropertiesChanged! |
| [ 16.250861] [7:m.android.phone: 3771] !@Boot_SVC : PhoneApp OnCrate |
| [ 16.327103] I[4: swapper/4: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 02 00 0a 0f 05 01 |
| [ 16.327124] I[4: swapper/4: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 03 00 07 01 02 01 |
| [ 16.328350] I[0: tee_irq_bh: 2789] mif: LNK-RX(23): f8 eb 17 00 13 00 0c 03 07 01 02 01 00 00 00 00 ... |
| [ 16.339575] I[5: Binder:3390_1: 3418] mif: LNK-TX(12): f8 ec 0c 00 08 00 00 00 0a 0f 05 01 |
| [ 16.339595] I[5: Binder:3390_1: 3418] mif: LNK-TX(12): f8 ec 0c 00 08 00 01 00 07 01 02 01 |
| [ 16.341476] I[0: swapper/0: 0] mif: LNK-RX(23): f8 ec 17 00 13 00 08 01 07 01 02 01 00 00 00 00 ... |
| [ 16.370732] I[5: swapper/5: 0] mif: LNK-TX(11): f8 eb 0b 00 07 00 04 00 05 01 02 |
| [ 16.371803] I[5: swapper/5: 0] mif: LNK-TX(11): f8 ec 0b 00 07 00 02 00 05 01 02 |
| [ 16.371955] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 0d 04 05 01 02 80 00 |
| [ 16.372958] I[0: swapper/0: 0] mif: LNK-RX(13): f8 ec 0d 00 09 00 09 02 05 01 02 80 00 |
| [ 16.510108] I[1: init: 1] mif: LNK-TX(12): f8 eb 0c 00 08 00 05 00 07 01 02 01 |
| [ 16.511314] I[0: surfaceflinger: 2877] mif: LNK-RX(23): f8 eb 17 00 13 00 0e 05 07 01 02 01 00 00 00 00 ... |
| [ 16.513049] I[4: swapper/4: 0] mif: LNK-TX(11): f8 eb 0b 00 07 00 06 00 08 03 02 |
| [ 16.514354] I[0: swapper/0: 0] mif: LNK-RX(37): f8 eb 25 00 21 00 0f 06 08 03 02 02 01 ff 30 30 ... |
| [ 16.515989] I[4: swapper/4: 0] mif: LNK-TX(13): f8 eb 0d 00 09 00 07 00 08 05 02 ff 03 |
| [ 16.517383] I[0: BootAnimation: 3152] mif: LNK-RX(30): f8 eb 1e 00 1a 00 10 07 08 05 02 ff 03 01 00 00 ... |
| [ 16.520763] I[4: swapper/4: 0] mif: LNK-TX(13): f8 eb 0d 00 09 00 08 00 08 05 02 ff 02 |
| [ 16.522459] I[0: swapper/0: 0] mif: LNK-RX(30): f8 eb 1e 00 1a 00 11 08 08 05 02 ff 02 01 00 00 ... |
| [ 16.529024] I[4: swapper/4: 0] mif: LNK-TX(11): f8 eb 0b 00 07 00 09 00 08 02 02 |
| [ 16.533398] I[0: swapper/0: 0] mif: LNK-RX(12): f8 eb 0c 00 08 00 12 09 08 02 02 02 |
| [ 16.668282] I[5: Binder:3390_3: 3640] mif: LNK-TX(12): f8 ec 0c 00 08 00 03 00 07 01 02 01 |
| [ 16.669519] I[0: swapper/0: 0] mif: LNK-RX(23): f8 ec 17 00 13 00 0a 03 07 01 02 01 00 00 00 00 ... |
| [ 16.671527] I[4: swapper/4: 0] mif: LNK-TX(11): f8 ec 0b 00 07 00 04 00 08 03 02 |
| [ 16.676661] I[0: swapper/0: 0] mif: LNK-RX(37): f8 ec 25 00 21 00 0b 04 08 03 02 02 01 ff 30 30 ... |
| [ 16.678356] I[0: swapper/0: 0] mif: LNK-TX(13): f8 ec 0d 00 09 00 05 00 08 05 02 ff 03 |
| [ 16.679713] I[0: servicemanager: 2876] mif: LNK-RX(30): f8 ec 1e 00 1a 00 0c 05 08 05 02 ff 03 01 00 00 ... |
| [ 16.682565] I[1: swapper/1: 0] mif: LNK-TX(13): f8 ec 0d 00 09 00 06 00 08 05 02 ff 02 |
| [ 16.683816] I[0: swapper/0: 0] mif: LNK-RX(30): f8 ec 1e 00 1a 00 0d 06 08 05 02 ff 02 01 00 00 ... |
| [ 16.685927] I[1: swapper/1: 0] mif: LNK-TX(11): f8 ec 0b 00 07 00 07 00 08 02 02 |
| [ 16.687899] I[0: swapper/0: 0] mif: LNK-RX(12): f8 ec 0c 00 08 00 0e 07 08 02 02 02 |
| [ 16.807578] [6: watchdog: 3979] !@Sync 0 [2017-01-28 12:26:48.680] |
| [ 16.810304] [6: mSvcLEDThread: 3490] [LED] store_s2mu004_rgb_lowpower set to 1 |
| [ 16.810410] [6: mSvcLEDThread: 3490] [LED] store_s2mu004_rgb_pattern : 0 lp : 1 |
| [ 17.082253] I[0: swapper/0: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 0a 00 0f 05 03 00 |
| [ 17.083452] I[0: Binder:3390_5: 3651] mif: LNK-RX(16): f8 eb 10 00 0c 00 13 0a 80 01 02 0f 05 03 00 80 |
| [ 17.086364] I[2: swapper/2: 0] mif: LNK-TX(12): f8 ec 0c 00 08 00 08 00 0f 05 03 00 |
| [ 17.087540] I[0: swapper/0: 0] mif: LNK-RX(16): f8 ec 10 00 0c 00 0f 08 80 01 02 0f 05 03 00 80 |
| [ 17.280340] [2: system_server: 3390] !@Boot: Loop forever |
| [ 17.281794] [2: system_server: 3390] !@[BatteryInfo] InitBatteryInfo() |
| [ 17.283752] [2: system_server: 3390] !@[BatteryInfo] readFromFile /efs/FactoryApp/asoc: -1 |
| [ 17.284992] [5: system_server: 3390] !@[BatteryInfo] readFromFile /efs/FactoryApp/batt_discharge_level: 14 |
| [ 17.285611] [5: system_server: 3390] sec-battery battery: sec_bat_store_attrs: BATTERY_CYCLE(0) |
| [ 17.285632] [5: system_server: 3390] sec-battery battery: sec_bat_store_attrs: [Long life] prev_battery_cycle = -1, new bat. cycle = 0 |
| [ 17.285645] [5: system_server: 3390] sec-battery battery: sec_bat_store_attrs: [Long life] Do sec_bat_aging_check() |
| [ 17.285658] [5: system_server: 3390] sec-battery battery: sec_bat_aging_check: [Long life] prev_step = 0, calc_step = 0 |
| [ 17.285831] [5: system_server: 3390] !@[BatteryInfo] writeToFile /sys/class/power_supply/battery/battery_cycle: 0 |
| [ 17.286978] [5: system_server: 3390] !@[BatteryInfo] readFromFile /efs/FactoryApp/max_current: 2176 |
| [ 17.287718] [5: system_server: 3390] !@[BatteryInfo] readFromFile /efs/FactoryApp/max_temp: 595 |
| [ 17.288064] [5: system_server: 3390] sec_bat_show_attrs: Fail to s2mu004-fuelgauge get (48=>-22) |
| [ 17.288266] [5: system_server: 3390] !@[BatteryInfo] readFromFile /sys/class/power_supply/battery/fg_asoc: -1 |
| [ 17.323241] [7: system_server: 3390] !@ mRfCalDate is null!!! manufacture_date is also null!!! we can not check weekly diff |
| [ 17.323309] [7: system_server: 3390] !@ Faild to get property values, longBatteryRetryCnt= 1 |
| [ 17.398856] I[4:m.android.phone: 3771] mif: LNK-TX(11): f8 eb 0b 00 07 00 0b 00 05 01 02 |
| [ 17.399938] I[4:m.android.phone: 3771] mif: LNK-TX(11): f8 ec 0b 00 07 00 09 00 05 01 02 |
| [ 17.400104] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 14 0b 05 01 02 80 00 |
| [ 17.401130] I[0: Binder:3797_4: 4127] mif: LNK-RX(13): f8 ec 0d 00 09 00 10 09 05 01 02 80 00 |
| [ 17.416382] I[2: kworker/u16:5: 1617] mif: LNK-TX(11): f8 eb 0b 00 07 00 0c 00 02 06 02 |
| [ 17.416401] I[2: kworker/u16:5: 1617] mif: LNK-TX(11): f8 eb 0b 00 07 00 0d 00 0a 56 02 |
| [ 17.422270] I[0:Jit thread pool: 3803] mif: LNK-RX(12): f8 eb 0c 00 08 00 15 0c 02 06 02 00 |
| [ 17.422317] I[0:Jit thread pool: 3803] mif: LNK-RX(16): f8 eb 10 00 0c 00 16 0d 80 01 02 0a 56 02 01 80 |
| [ 17.437594] I[0: logd.writer: 2782] mif: LNK-TX(12): f8 eb 0c 00 08 00 0e 00 0a 01 02 ff |
| [ 17.438736] I[0: logd.writer: 2782] mif: LNK-RX(277): f8 eb 15 01 11 01 17 0e 0a 01 02 bf 41 35 33 30 ... |
| [ 17.455492] [5: rild: 3107] KAP Read STATUS val = 5afe0001 |
| [ 17.456665] I[5: AudioOut_15: 3135] mif: LNK-TX(14): f8 eb 0e 00 0a 00 0f 00 13 0b 05 01 00 00 |
| [ 17.456684] I[5: AudioOut_15: 3135] mif: LNK-TX(12): f8 eb 0c 00 08 00 10 00 0a 03 02 01 |
| [ 17.459892] I[0: Binder:3390_3: 3640] mif: LNK-RX(45): f8 eb 2d 00 29 00 18 10 0a 03 02 01 11 33 35 35 ... |
| [ 17.460595] I[5: rild: 3107] mif: LNK-TX(11): f8 eb 0b 00 07 00 11 00 08 03 02 |
| [ 17.461972] I[0:Jit thread pool: 3803] mif: LNK-RX(12): f8 eb 0c 00 08 00 19 00 0a 49 03 02 |
| [ 17.462024] I[0:Jit thread pool: 3803] mif: LNK-RX(37): f8 eb 25 00 21 00 1a 11 08 03 02 02 01 ff 30 30 ... |
| [ 17.468572] I[1: swapper/1: 0] mif: LNK-TX(13): f8 eb 0d 00 09 00 12 00 08 05 02 ff 03 |
| [ 17.468591] I[1: swapper/1: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 13 00 0a 03 02 01 |
| [ 17.471435] I[0: Binder:3390_2: 3419] mif: LNK-RX(45): f8 eb 2d 00 29 00 1b 13 0a 03 02 01 11 33 35 35 ... |
| [ 17.473514] I[0: NetdConnector: 3637] mif: LNK-RX(12): f8 eb 0c 00 08 00 1c 00 0a 49 03 02 |
| [ 17.473549] I[0: NetdConnector: 3637] mif: LNK-RX(30): f8 eb 1e 00 1a 00 1d 12 08 05 02 ff 03 01 00 00 ... |
| [ 17.482802] I[5: swapper/5: 0] mif: LNK-TX(13): f8 eb 0d 00 09 00 14 00 08 05 02 ff 02 |
| [ 17.484592] I[0: Binder:3390_3: 3640] mif: LNK-RX(30): f8 eb 1e 00 1a 00 1e 14 08 05 02 ff 02 01 00 00 ... |
| [ 17.487180] I[4: Binder:3390_3: 3640] mif: LNK-TX(47): f8 eb 2f 00 2b 00 15 00 13 01 03 05 00 59 00 01 ... |
| [ 17.488265] I[4:com.android.nfc: 4064] mif: LNK-TX(11): f8 eb 0b 00 07 00 16 00 08 02 02 |
| [ 17.491714] I[0: ksoftirqd/0: 3] mif: LNK-RX(16): f8 eb 10 00 0c 00 1f 15 80 01 02 13 01 03 00 80 |
| [ 17.492812] I[0: kworker/u16:5: 1617] mif: LNK-RX(12): f8 eb 0c 00 08 00 20 16 08 02 02 02 |
| [ 17.494241] I[2: Binder:3390_9: 4104] mif: LNK-TX(47): f8 eb 2f 00 2b 00 17 00 13 01 03 05 00 59 01 01 ... |
| [ 17.494261] I[2: Binder:3390_9: 4104] mif: LNK-TX(11): f8 eb 0b 00 07 00 18 00 08 03 02 |
| [ 17.495889] I[0:ncymode.service: 4036] mif: LNK-RX(16): f8 eb 10 00 0c 00 21 17 80 01 02 13 01 03 00 80 |
| [ 17.495959] I[0:ncymode.service: 4036] mif: LNK-RX(37): f8 eb 25 00 21 00 22 18 08 03 02 02 01 ff 30 30 ... |
| [ 17.498069] I[3: swapper/3: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 19 00 0a 0c 05 00 |
| [ 17.498089] I[3: swapper/3: 0] mif: LNK-TX(13): f8 eb 0d 00 09 00 1a 00 08 05 02 ff 03 |
| [ 17.499875] I[0: swapper/0: 0] mif: LNK-RX(30): f8 eb 1e 00 1a 00 23 1a 08 05 02 ff 03 01 00 00 ... |
| [ 17.501934] I[3: kworker/u16:4: 1586] mif: LNK-TX(13): f8 eb 0d 00 09 00 1b 00 08 05 02 ff 02 |
| [ 17.503907] I[0: Binder:3390_8: 4103] mif: LNK-RX(30): f8 eb 1e 00 1a 00 24 1b 08 05 02 ff 02 01 00 00 ... |
| [ 17.510417] I[1:ActivityManager: 3454] mif: LNK-TX(11): f8 eb 0b 00 07 00 1c 00 08 02 02 |
| [ 17.511888] I[0: kworker/u16:6: 3001] mif: LNK-RX(12): f8 eb 0c 00 08 00 25 1c 08 02 02 02 |
| [ 17.523829] I[3: kworker/u16:7: 3551] mif: LNK-TX(11): f8 ec 0b 00 07 00 0a 00 02 06 02 |
| [ 17.526604] I[0: surfaceflinger: 2877] mif: LNK-RX(12): f8 ec 0c 00 08 00 11 0a 02 06 02 00 |
| [ 17.541241] I[1: servicemanager: 2876] mif: LNK-TX(12): f8 ec 0c 00 08 00 0b 00 0a 01 02 ff |
| [ 17.542626] I[0: servicemanager: 2876] mif: LNK-RX(277): f8 ec 15 01 11 01 12 0b 0a 01 02 bf 41 35 33 30 ... |
| [ 17.556444] [7: rild: 3142] KAP Read STATUS val = 5afe0001 |
| [ 17.557535] I[7:ndroid.settings: 4107] mif: LNK-TX(14): f8 ec 0e 00 0a 00 0c 00 13 0b 05 01 00 00 |
| [ 17.557547] I[7:ndroid.settings: 4107] mif: LNK-TX(12): f8 ec 0c 00 08 00 0d 00 0a 03 02 01 |
| [ 17.561254] I[0: swapper/0: 0] mif: LNK-RX(45): f8 ec 2d 00 29 00 13 0d 0a 03 02 01 11 33 35 35 ... |
| [ 17.561927] I[4: mmc-cmdqd/0: 1664] mif: LNK-TX(11): f8 ec 0b 00 07 00 0e 00 08 03 02 |
| [ 17.563268] I[0: system_server: 3390] mif: LNK-RX(12): f8 ec 0c 00 08 00 14 00 0a 49 03 02 |
| [ 17.563307] I[0: system_server: 3390] mif: LNK-RX(37): f8 ec 25 00 21 00 15 0e 08 03 02 02 01 ff 30 30 ... |
| [ 17.571255] I[0: swapper/0: 0] mif: LNK-TX(13): f8 ec 0d 00 09 00 0f 00 08 05 02 ff 03 |
| [ 17.571275] I[0: swapper/0: 0] mif: LNK-TX(12): f8 ec 0c 00 08 00 10 00 0a 03 02 01 |
| [ 17.573534] I[0: Binder:3390_8: 4103] mif: LNK-RX(45): f8 ec 2d 00 29 00 16 10 0a 03 02 01 11 33 35 35 ... |
| [ 17.575541] I[0: Binder:3390_7: 3668] mif: LNK-RX(12): f8 ec 0c 00 08 00 17 00 0a 49 03 02 |
| [ 17.575576] I[0: Binder:3390_7: 3668] mif: LNK-RX(30): f8 ec 1e 00 1a 00 18 0f 08 05 02 ff 03 01 00 00 ... |
| [ 17.591121] I[0: BootAnimation: 3152] mif: LNK-TX(13): f8 ec 0d 00 09 00 11 00 08 05 02 ff 02 |
| [ 17.591144] I[0: BootAnimation: 3152] mif: LNK-TX(47): f8 ec 2f 00 2b 00 12 00 13 01 03 05 00 59 00 01 ... |
| [ 17.592856] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] [P] tID:0 z:49 major:12 minor:12 tc:1 type:0 noise:0 |
| [ 17.594447] I[0: ksoftirqd/0: 3] mif: LNK-RX(16): f8 ec 10 00 0c 00 19 12 80 01 02 13 01 03 01 80 |
| [ 17.594487] I[0: ksoftirqd/0: 3] mif: LNK-RX(30): f8 ec 1e 00 1a 00 1a 11 08 05 02 ff 02 01 00 00 ... |
| [ 17.597113] I[3: kworker/u16:4: 1586] mif: LNK-TX(47): f8 ec 2f 00 2b 00 13 00 13 01 03 05 00 59 01 01 ... |
| [ 17.597135] I[3: kworker/u16:4: 1586] mif: LNK-TX(11): f8 ec 0b 00 07 00 14 00 08 02 02 |
| [ 17.598517] I[0: PhoneStatusBar: 4133] mif: LNK-RX(16): f8 ec 10 00 0c 00 1b 13 80 01 02 13 01 03 01 80 |
| [ 17.598565] I[0: PhoneStatusBar: 4133] mif: LNK-RX(12): f8 ec 0c 00 08 00 1c 14 08 02 02 02 |
| [ 17.600366] I[3: swapper/3: 0] mif: LNK-TX(12): f8 ec 0c 00 08 00 15 00 0a 0c 05 00 |
| [ 17.600387] I[3: swapper/3: 0] mif: LNK-TX(11): f8 ec 0b 00 07 00 16 00 08 03 02 |
| [ 17.601566] I[0: irq/198-sec_ts: 1464] mif: LNK-RX(37): f8 ec 25 00 21 00 1d 16 08 03 02 02 01 ff 30 30 ... |
| [ 17.603350] I[0: swapper/0: 0] mif: LNK-TX(13): f8 ec 0d 00 09 00 17 00 08 05 02 ff 03 |
| [ 17.604540] I[0: swapper/0: 0] mif: LNK-RX(30): f8 ec 1e 00 1a 00 1e 17 08 05 02 ff 03 01 00 00 ... |
| [ 17.606436] I[0: swapper/0: 0] mif: LNK-TX(13): f8 ec 0d 00 09 00 18 00 08 05 02 ff 02 |
| [ 17.607618] I[0: swapper/0: 0] mif: LNK-RX(30): f8 ec 1e 00 1a 00 1f 18 08 05 02 ff 02 01 00 00 ... |
| [ 17.612168] I[3: swapper/3: 0] mif: LNK-TX(11): f8 ec 0b 00 07 00 19 00 08 02 02 |
| [ 17.613602] I[0: surfaceflinger: 2877] mif: LNK-RX(12): f8 ec 0c 00 08 00 20 19 08 02 02 02 |
| [ 17.841060] I[3: swapper/3: 0] mif: LNK-TX(11): f8 eb 0b 00 07 00 1d 00 0f 05 02 |
| [ 17.842194] I[0: BootAnimation: 3152] mif: LNK-RX(12): f8 eb 0c 00 08 00 26 1d 0f 05 02 00 |
| [ 17.851041] I[2: Binder:3390_6: 3665] mif: LNK-TX(11): f8 ec 0b 00 07 00 1a 00 0f 05 02 |
| [ 17.852221] I[0:droid.bluetooth: 3784] mif: LNK-RX(12): f8 ec 0c 00 08 00 21 1a 0f 05 02 00 |
| [ 17.897525] [7: hci_thread: 4193] scsc_bt_h4_open: (h4_users=0) |
| [ 17.897549] [7: hci_thread: 4193] scsc_mx_service_open: |
| [ 17.897560] [7: hci_thread: 4193] __mxman_open: Already opened: users=2 |
| [ 17.897570] [7: hci_thread: 4193] mxman_print_versions: RF_CHIP_VERSION: 0x10b1: S612 (0xb1), EVT1.0 |
| [ 17.897577] [7: hci_thread: 4193] mxman_print_versions: WLBT FW: O|2110|2017-12-15 15:14:39 UTC|lassen_s612_lassen_a5_rev02_2017_07 |
| [ 17.897585] [7: hci_thread: 4193] mxman_print_versions: WLBT Driver Build Type: User |
| [ 17.897664] [7: hci_thread: 4193] write_m_test_chip_version_file: cid file wasn't opened |
| [ 17.897703] [7: hci_thread: 4193] platform_mif_get_abox_shared_mem: |
| [ 17.897786] [7: hci_thread: 4193] slsi_sm_bt_service_start: abox_virtual: 0xffffff8019c7f000 abox_physical: 0x00000008fe400000 |
| [ 17.897800] [7: hci_thread: 4193] slsi_sm_bt_service_start: regions (bhcs_ref=0x0038b980, bsmhcp_ref=0x0038c180, config_ref=0x00000000, abox_ref=0x00400000) |
| [ 17.897809] [7: hci_thread: 4193] slsi_sm_bt_service_start: version=2 |
| [ 17.897857] [7: hci_thread: 4193] mx140_request_file: vfs_stat() failed for /system/etc/wifi/mx140/conf/bluetooth/bt.hcf |
| [ 17.898331] [7: hci_thread: 4193] scsc_mx_service_start: |
| [ 17.907399] [1: mxmgmt_thread: 3752] srv_message_handler: Received SM_MSG_START_CFM message service=ffffffc85f75ec00 with service_id=2 from the firmware |
| [ 17.907466] [4: hci_thread: 4193] samsung-abox 14a50000.abox: samsung_abox_bt_probe |
| [ 17.907482] [4: hci_thread: 4193] samsung-abox 14a50000.abox: samsung_abox_bt_probe trying to map size 0x5000, Physical: 0xfe400000 |
| [ 17.908410] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_STATUS (0x0f), length=4] |
| [ 17.966613] [5:ActivityManager: 3454] !@Boot: performEnableScreen |
| [ 17.987409] [6: system_server: 3390] mdnie mdnie: accessibility_store: 0, 1 |
| [ 17.987452] [6: system_server: 3390] mdnie mdnie: AUTO_UI |
| [ 18.077239] I[3: swapper/3: 0] mif: LNK-TX(12): f8 eb 0c 00 08 00 1e 00 02 18 03 00 |
| [ 18.078373] I[0: swapper/0: 0] mif: LNK-RX(16): f8 eb 10 00 0c 00 27 1e 80 01 02 02 18 03 00 80 |
| [ 18.110180] [3: kworker/3:1: 1961] Trustonic TEE: e01|[vaultkeeper_tz:SCrypto] <INFO> SCrypto 2.0 is in FIPS approved mode |
| [ 18.110201] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Starting |
| [ 18.110958] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Got a message! |
| [ 18.110980] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_switcher: RemoteLockControl / solution(1) |
| [ 18.123875] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: [CMD:READ_STATE] |
| [ 18.123895] [3: kworker/3:1: 1961] Trustonic TEE: e01|VaultKeeper :: vk_server_read_vault |
| [ 18.126274] [5: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: start rpmb workqueue with command(3) |
| [ 18.126754] I[2: DispSync: 2888] mif: LNK-TX(12): f8 ec 0c 00 08 00 1b 00 02 18 03 00 |
| [ 18.126928] [4: kworker/4:1: 1964] Trustonic TEE: e01|VaultKeeper :: vkmc_read_vault |
| [ 18.127915] I[0: logd.writer: 2782] mif: LNK-RX(16): f8 ec 10 00 0c 00 22 1b 80 01 02 02 18 03 00 80 |
| [ 18.128841] [3: kworker/u17:1: 1910] exynos-mmc-srpmb mmc-srpmb: finish rpmb workqueue with command(3) |
| [ 18.140761] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: process_vault_cmd: Done with success |
| [ 18.140784] [5: kworker/5:1: 1505] Trustonic TEE: e01|VaultKeeper :: Tlvaultkeeper::Returning [0/0x80000101] |
| [ 18.255104] [4: system_server: 3390] [VIB] haptic_enable : 0 ms |
| [ 18.257477] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.261893] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=11] |
| [ 18.266334] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.270773] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.275234] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=10] |
| [ 18.279745] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=68] |
| [ 18.284182] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=14] |
| [ 18.288621] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.293050] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.293821] [7:sensorhubservic: 2975] [SSP] ssp_sensorhub_write(4): 0xfff, 0xd, 0xfff, 0x0 |
| [ 18.293837] [7:sensorhubservic: 2975] [SSP] ssp_send_command( 334): cmd 3 type 255 subcmd 5 send_buf_len 0 timeout 0 |
| [ 18.297407] [0:irq/212-SSP_Int: 2001] [SSP] [M] gyro bias from AP: -40, 36, -16 |
| [ 18.297511] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=14] |
| [ 18.300205] [3:sensorhubservic: 2975] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 18.300230] [3:sensorhubservic: 2975] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 18.300241] [3:sensorhubservic: 2975] [SSP] clean_msg( 74): kfree(msg) |
| [ 18.300255] [3:sensorhubservic: 2975] [SSP] ssp_send_status( 376): command 0xd1 |
| [ 18.301997] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=14] |
| [ 18.306411] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.307713] [4: Binder:2975_1: 3026] [SSP] ssp_sensorhub_write(4): 0xfff, 0xd, 0xfff, 0x0 |
| [ 18.307744] [4: Binder:2975_1: 3026] [SSP] ssp_send_command( 334): cmd 3 type 255 subcmd 5 send_buf_len 0 timeout 0 |
| [ 18.310855] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.315317] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=7] |
| [ 18.315407] [3: Binder:2975_1: 3026] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 18.315421] [3: Binder:2975_1: 3026] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 18.315432] [3: Binder:2975_1: 3026] [SSP] clean_msg( 74): kfree(msg) |
| [ 18.315444] [3: Binder:2975_1: 3026] [SSP] ssp_send_status( 376): command 0xd1 |
| [ 18.317665] [7:sensorhubservic: 2975] [SSP] ssp_sensorhub_write(4): 0xfff, 0xd, 0xfff, 0x0 |
| [ 18.317681] [7:sensorhubservic: 2975] [SSP] ssp_send_command( 334): cmd 3 type 255 subcmd 5 send_buf_len 0 timeout 0 |
| [ 18.319748] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.324051] [3:sensorhubservic: 2975] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 18.324070] [3:sensorhubservic: 2975] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 18.324080] [3:sensorhubservic: 2975] [SSP] clean_msg( 74): kfree(msg) |
| [ 18.324093] [3:sensorhubservic: 2975] [SSP] ssp_send_status( 376): command 0xd1 |
| [ 18.324377] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.328882] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.333333] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=8] |
| [ 18.337761] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.342183] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.346764] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=10] |
| [ 18.351099] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.355510] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.360161] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.364529] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.368929] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.373418] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.377806] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.382249] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.386678] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.391137] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=18] |
| [ 18.395744] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=252] |
| [ 18.400250] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.412072] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.416796] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.421192] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.425618] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.430104] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.434625] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.439040] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.443559] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.447916] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.452387] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.456805] [7:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.461543] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.465784] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.470179] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.474664] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.479115] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.483664] [1:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.488008] [1:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=12] |
| [ 18.492477] [1:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.497005] [1:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.501412] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.501590] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.501779] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.501912] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.502057] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.502186] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.502538] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.502714] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.502863] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.503006] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.503136] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.503264] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.503424] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.503561] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.503855] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.508274] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.512777] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.517289] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.521703] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.526170] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.530591] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.535039] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.539499] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.543946] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.548405] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.552816] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.557307] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.561734] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.566213] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.570617] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.572852] I[5: Binder:3771_1: 3782] mif: LNK-TX(11): f8 eb 0b 00 07 00 1f 00 0a 2d 02 |
| [ 18.572873] I[5: Binder:3771_1: 3782] mif: LNK-TX(12): f8 eb 0c 00 08 00 20 00 0f 05 03 00 |
| [ 18.574046] I[0:ndroid.systemui: 3797] mif: LNK-RX(13): f8 eb 0d 00 09 00 28 1f 0a 2d 02 03 00 |
| [ 18.574088] I[0:ndroid.systemui: 3797] mif: LNK-RX(16): f8 eb 10 00 0c 00 29 20 80 01 02 0f 05 03 00 80 |
| [ 18.575090] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.577375] [3: Binder:2975_1: 3026] [SSP] ssp_sensorhub_write(4): 0xfff, 0xd, 0xfff, 0x0 |
| [ 18.577398] [3: Binder:2975_1: 3026] [SSP] ssp_send_command( 334): cmd 3 type 255 subcmd 7 send_buf_len 0 timeout 0 |
| [ 18.579525] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.583689] [3: Binder:2975_1: 3026] [SSP] ssp_send_command( 340): After do_transfer timeout 0, status 0 |
| [ 18.583709] [3: Binder:2975_1: 3026] [SSP] clean_msg( 70): kfree(msg->buffer) |
| [ 18.583719] [3: Binder:2975_1: 3026] [SSP] clean_msg( 74): kfree(msg) |
| [ 18.583730] [3: Binder:2975_1: 3026] [SSP] ssp_send_status( 376): command 0xd6 |
| [ 18.583977] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.588409] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.592881] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.597324] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.601846] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.606280] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.610771] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.615191] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.619699] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.624087] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.628548] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.633086] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.637516] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.642002] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.646444] [0:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.650860] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.655319] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.659761] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.664216] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.668714] [4:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.673098] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.673311] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.673515] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.673649] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.673804] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.673972] [6:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.674188] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=5] |
| [ 18.678682] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.683324] [2:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.687676] [5:hci_single_chan: 4210] scsc_hci_evt_read: HCI Event [type=HCI_EV_COMMAND_COMPLETE (0x0e), length=4] |
| [ 18.691234] I[0: swapper/0: 0] mif: LNK-TX(11): f8 eb 0b 00 07 00 21 00 0a 2d 02 |
| [ 18.692407] I[0: swapper/0: 0] mif: LNK-RX(13): f8 eb 0d 00 09 00 2a 21 0a 2d 02 03 00 |
| [ 18.702164] I[7:.sec.imsservice: 4070] mif: LNK-TX(15): f8 eb 0f 00 0b 00 22 00 0a 10 05 00 04 00 00 |
| [ 18.705390] I[5: Binder:3390_8: 4103] mif: LNK-TX(15): f8 ec 0f 00 0b 00 1c 00 0a 10 05 00 04 00 00 |
| [ 18.721122] [0: irq/198-sec_ts: 1464] sec_ts 9-0048: [sec_input] [R] tID:0 mc:115 tc:0 v:0109 cal:A2(9A) id(0,0) p:0 noise:0 lp:(4/0) FFFFF D00000, C01T0109.LCIA.L |
