Google Git
Sign in
android / platform / external / cpuinfo / 935c29acef3c689e4ce720e12f1aa44ab96b9c5f / . / test / dmesg / blu-r1-hd.log
blob: 7379381939903f93bfa3d0e6a76c46b16a9b5cf0 [file] [log] [blame]
[ 5.654404] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 4.
[ 5.681460] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.681490] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.681517] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.681566] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.681566] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.681566] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.681566] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.681612] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.681665] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.681665] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.681665] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.681665] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.681731] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.681731] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.681731] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.681731] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.681797] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.681797] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.681797] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.681797] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.681843] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.682062] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.682090] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.682117] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.682165] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.682165] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.682165] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.682165] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.682211] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.682263] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.682263] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.682263] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.682263] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.682329] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.682329] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.682329] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.682329] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.682395] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.682395] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.682395] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.682395] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.682440] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.682660] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.682689] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.682716] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.682763] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.682763] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.682763] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.682763] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.682809] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.682861] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.682861] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.682861] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.682861] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.682927] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.682927] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.682927] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.682927] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.682992] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.682992] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.682992] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.682992] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.683037] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.683254] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.683283] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.683310] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.683358] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.683358] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.683358] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.683358] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.683404] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.683455] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.683455] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.683455] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.683455] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.683521] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.683521] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.683521] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.683521] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.683587] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.683587] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.683587] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.683587] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.683633] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.683852] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.683881] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.683926] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.683974] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.683974] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.683974] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.683974] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.684020] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.684072] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.684072] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.684072] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.684072] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.684138] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.684138] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.684138] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.684138] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.684204] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.684204] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.684204] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.684204] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.684249] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.684289] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Read Error: 0x4220, 4 byte(s), err-code: -22
[ 5.684315] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma read failed
[ 5.684342] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP_REG_HW_INFO : 00000000
[ 5.684368] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 5.
[ 5.711291] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C communication ERROR!
[ 5.941623] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.941679] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.941707] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.941755] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.941755] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 5.941755] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 5.941755] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.941803] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.941855] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.941855] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 5.941855] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 5.941855] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.941923] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.941923] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.941923] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.941923] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.941991] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.941991] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 5.941991] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 5.941991] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 5.942037] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.942131] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 5.942371] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.942401] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.942428] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.942477] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.942477] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 5.942477] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 5.942477] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.942522] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.942575] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.942575] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 5.942575] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 5.942575] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.942642] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.942642] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.942642] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.942642] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.942709] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.942709] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 5.942709] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 5.942709] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 5.942755] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.942849] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 5.943084] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.943114] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.943140] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.943188] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.943188] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 5.943188] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 5.943188] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.943234] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.943286] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.943286] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 5.943286] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 5.943286] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.943353] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.943353] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.943353] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.943353] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.943420] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.943420] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 5.943420] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 5.943420] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 5.943466] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.943560] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 5.943792] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.943821] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.943847] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.943895] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.943895] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 5.943895] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 5.943895] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.943940] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.943992] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.943992] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 5.943992] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 5.943992] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.944059] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.944059] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.944059] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.944059] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.944127] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.944127] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 5.944127] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 5.944127] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 5.944173] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.944266] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 5.944499] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.944528] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.944554] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.944601] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.944601] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 5.944601] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 5.944601] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.944647] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.944698] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.944698] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 5.944698] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 5.944698] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.944765] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.944765] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.944765] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.944765] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.944832] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.944832] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 5.944832] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 5.944832] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 5.944878] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.944971] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 5.945011] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 5.945038] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 5.971557] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.971588] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.971615] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.971663] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.971663] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.971663] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.971663] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.971710] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.971762] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.971762] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.971762] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.971762] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.971828] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.971828] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.971828] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.971828] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.971894] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.971894] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.971894] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.971894] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.971940] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.972197] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.972225] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.972252] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.972300] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.972300] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.972300] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.972300] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.972345] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.972397] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.972397] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.972397] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.972397] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.972463] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.972463] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.972463] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.972463] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.972529] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.972529] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.972529] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.972529] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.972574] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.972784] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.972813] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.972840] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.972888] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.972888] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.972888] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.972888] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.972933] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.972985] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.972985] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.972985] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.972985] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.973051] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.973051] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.973051] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.973051] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.973117] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.973117] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.973117] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.973117] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.973162] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.973416] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.973445] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.973472] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.973519] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.973519] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.973519] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.973519] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.973565] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.973617] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.973617] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.973617] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.973617] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.973684] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.973684] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.973684] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.973684] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.973750] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.973750] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.973750] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.973750] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.973795] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.974051] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 5.974079] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 5.974106] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 5.974154] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 5.974154] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 5.974154] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 5.974154] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 5.974200] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 5.974251] (0)[1:swapper/0][name:i2c&]I2C register:
[ 5.974251] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 5.974251] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 5.974251] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 5.974317] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 5.974317] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.974317] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 5.974317] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.974383] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 5.974383] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 5.974383] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 5.974383] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 5.974429] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 5.974467] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C read 0x8008 length=10 failed
[ 5.974467]
[ 6.171532] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.171564] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.171592] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.171640] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.171640] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.171640] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.171640] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.171686] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.171739] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.171739] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.171739] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.171739] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.171806] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.171806] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.171806] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.171806] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.171875] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.171875] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.171875] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.171875] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.171921] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.172015] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.172283] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.172312] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.172338] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.172386] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.172386] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.172386] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.172386] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.172433] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.172485] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.172485] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.172485] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.172485] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.172551] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.172551] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.172551] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.172551] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.172618] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.172618] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.172618] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.172618] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.172664] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.172757] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.173021] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.173049] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.173076] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.173123] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.173123] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.173123] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.173123] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.173170] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.173221] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.173221] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.173221] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.173221] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.173287] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.173287] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.173287] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.173287] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.173355] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.173355] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.173355] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.173355] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.173401] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.173494] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.173759] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.173787] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.173813] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.173861] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.173861] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.173861] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.173861] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.173906] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.173959] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.173959] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.173959] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.173959] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.174025] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.174025] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.174025] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.174025] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.174092] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.174092] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.174092] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.174092] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.174137] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.174231] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.174670] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.174700] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.174726] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.174774] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.174774] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.174774] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.174774] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.174820] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.174873] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.174873] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.174873] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.174873] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.174939] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.174939] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.174939] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.174939] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.175006] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.175006] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.175006] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.175006] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.175052] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.175146] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.175187] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 6.175214] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 6.175463] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.175491] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.175518] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.175566] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.175566] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.175566] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.175566] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.175612] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.175664] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.175664] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.175664] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.175664] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.175730] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.175730] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.175730] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.175730] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.175796] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.175796] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.175796] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.175796] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.175841] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.176096] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.176125] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.176151] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.176198] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.176198] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.176198] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.176198] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.176244] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.176296] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.176296] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.176296] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.176296] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.176362] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.176362] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.176362] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.176362] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.176428] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.176428] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.176428] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.176428] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.176473] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.176728] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.176757] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.176784] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.176831] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.176831] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.176831] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.176831] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.176877] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.176929] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.176929] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.176929] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.176929] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.176995] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.176995] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.176995] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.176995] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.177061] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.177061] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.177061] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.177061] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.177106] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.177361] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.177390] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.177416] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.177463] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.177463] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.177463] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.177463] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.177509] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.177561] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.177561] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.177561] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.177561] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.177627] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.177627] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.177627] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.177627] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.177692] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.177692] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.177692] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.177692] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.177738] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.177994] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.178023] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.178049] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.178097] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.178097] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.178097] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.178097] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.178143] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.178195] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.178195] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.178195] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.178195] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.178262] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.178262] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.178262] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.178262] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.178328] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.178328] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.178328] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.178328] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.178373] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.178412] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C read 0x8008 length=10 failed
[ 6.178412]
[ 6.371542] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.371574] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.371603] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.371651] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.371651] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.371651] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.371651] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.371698] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.371750] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.371750] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.371750] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.371750] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.371818] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.371818] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.371818] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.371818] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.371885] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.371885] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.371885] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.371885] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.371931] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.372025] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.372295] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.372324] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.372351] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.372398] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.372398] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.372398] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.372398] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.372445] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.372497] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.372497] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.372497] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.372497] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.372563] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.372563] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.372563] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.372563] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.372631] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.372631] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.372631] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.372631] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.372676] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.372770] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.373034] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.373063] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.373089] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.373137] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.373137] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.373137] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.373137] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.373183] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.373234] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.373234] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.373234] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.373234] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.373301] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.373301] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.373301] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.373301] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.373368] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.373368] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.373368] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.373368] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.373413] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.373507] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.373771] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.373800] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.373826] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.373874] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.373874] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.373874] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.373874] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.374092] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.374145] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.374145] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.374145] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.374145] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.374212] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.374212] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.374212] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.374212] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.374279] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.374279] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.374279] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.374279] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.374324] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.374418] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.374686] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.374715] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.374741] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.374788] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.374788] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.374788] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.374788] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.374834] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.374886] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.374886] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.374886] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.374886] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.374952] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.374952] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.374952] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.374952] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.375020] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.375020] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.375020] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.375020] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.375065] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.375158] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.375199] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 6.375226] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 6.375475] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.375504] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.375531] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.375579] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.375579] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.375579] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.375579] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.375625] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.375678] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.375678] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.375678] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.375678] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.375744] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.375744] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.375744] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.375744] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.375809] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.375809] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.375809] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.375809] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.375854] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.376109] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.376138] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.376165] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.376213] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.376213] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.376213] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.376213] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.376259] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.376312] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.376312] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.376312] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.376312] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.376378] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.376378] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.376378] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.376378] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.376444] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.376444] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.376444] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.376444] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.376489] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.376743] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.376772] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.376798] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.376845] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.376845] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.376845] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.376845] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.376891] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.376943] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.376943] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.376943] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.376943] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.377009] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.377009] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.377009] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.377009] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.377075] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.377075] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.377075] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.377075] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.377120] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.377374] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.377403] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.377430] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.377478] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.377478] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.377478] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.377478] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.377523] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.377576] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.377576] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.377576] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.377576] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.377642] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.377642] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.377642] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.377642] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.377708] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.377708] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.377708] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.377708] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.377753] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.378006] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.378035] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.378061] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.378108] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.378108] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.378108] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.378108] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.378154] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.378206] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.378206] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.378206] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.378206] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.378272] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.378272] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.378272] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.378272] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.378338] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.378338] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.378338] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.378338] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.378383] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.378422] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C read 0x8008 length=10 failed
[ 6.378422]
[ 6.571544] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.571577] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.571604] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.571652] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.571652] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.571652] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.571652] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.571699] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.571752] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.571752] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.571752] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.571752] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.571819] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.571819] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.571819] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.571819] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.571887] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.571887] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.571887] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.571887] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.571933] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.572026] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.572298] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.572327] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.572353] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.572401] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.572401] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.572401] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.572401] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.572446] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.572498] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.572498] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.572498] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.572498] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.572564] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.572564] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.572564] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.572564] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.572632] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.572632] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.572632] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.572632] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.572678] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.572771] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.573037] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.573066] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.573092] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.573140] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.573140] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.573140] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.573140] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.573186] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.573238] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.573238] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.573238] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.573238] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.573305] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.573305] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.573305] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.573305] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.573372] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.573372] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.573372] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.573372] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.573417] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.573635] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.573906] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.573935] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.573961] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.574009] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.574009] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.574009] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.574009] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.574055] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.574107] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.574107] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.574107] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.574107] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.574173] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.574173] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.574173] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.574173] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.574241] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.574241] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.574241] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.574241] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.574286] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.574380] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.574646] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.574675] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.574702] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.574750] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.574750] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.574750] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.574750] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.574796] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.574848] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.574848] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.574848] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.574848] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.574914] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.574914] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.574914] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.574914] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.574981] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.574981] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.574981] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.574981] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.575026] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.575120] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.575160] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 6.575187] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 6.575437] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.575465] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.575491] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.575539] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.575539] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.575539] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.575539] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.575585] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.575637] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.575637] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.575637] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.575637] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.575703] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.575703] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.575703] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.575703] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.575769] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.575769] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.575769] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.575769] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.575814] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.576069] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.576098] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.576124] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.576172] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.576172] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.576172] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.576172] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.576219] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.576271] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.576271] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.576271] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.576271] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.576337] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.576337] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.576337] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.576337] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.576404] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.576404] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.576404] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.576404] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.576449] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.576702] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.576731] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.576757] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.576805] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.576805] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.576805] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.576805] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.576852] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.576904] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.576904] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.576904] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.576904] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.576970] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.576970] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.576970] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.576970] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.577036] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.577036] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.577036] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.577036] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.577081] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.577336] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.577365] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.577392] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.577439] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.577439] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.577439] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.577439] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.577485] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.577537] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.577537] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.577537] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.577537] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.577603] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.577603] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.577603] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.577603] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.577669] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.577669] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.577669] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.577669] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.577714] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.577970] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.577998] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.578025] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.578073] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.578073] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.578073] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.578073] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.578119] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.578171] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.578171] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.578171] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.578171] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.578237] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.578237] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.578237] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.578237] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.578302] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.578302] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.578302] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.578302] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.578347] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.578386] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C read 0x8008 length=10 failed
[ 6.578386]
[ 6.771555] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.771588] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.771616] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.771665] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.771665] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.771665] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.771665] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.771711] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.771763] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.771763] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.771763] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.771763] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.771830] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.771830] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.771830] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.771830] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.771897] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.771897] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.771897] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.771897] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.771943] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.772037] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.772307] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.772337] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.772363] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.772411] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.772411] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.772411] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.772411] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.772457] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.772509] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.772509] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.772509] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.772509] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.772575] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.772575] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.772575] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.772575] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.772643] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.772643] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.772643] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.772643] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.772688] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.772782] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.773186] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.773242] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.773268] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.773316] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.773316] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.773316] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.773316] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.773362] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.773414] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.773414] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.773414] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.773414] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.773481] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.773481] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.773481] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.773481] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.773549] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.773549] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.773549] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.773549] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.773595] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.773689] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.773906] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.773935] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.773962] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.774010] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.774010] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.774010] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.774010] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.774056] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.774108] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.774108] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.774108] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.774108] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.774174] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.774174] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.774174] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.774174] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.774242] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.774242] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.774242] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.774242] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.774287] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.774380] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.774651] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.774681] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.774707] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.774755] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.774755] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.774755] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.774755] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.774801] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.774853] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.774853] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.774853] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.774853] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.774920] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.774920] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.774920] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.774920] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.774987] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.774987] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.774987] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.774987] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.775032] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.775126] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.775167] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 6.775194] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 6.775443] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.775471] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.775498] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.775545] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.775545] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.775545] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.775545] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.775591] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.775643] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.775643] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.775643] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.775643] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.775709] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.775709] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.775709] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.775709] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.775775] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.775775] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.775775] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.775775] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.775821] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.776077] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.776106] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.776132] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.776180] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.776180] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.776180] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.776180] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.776226] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.776277] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.776277] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.776277] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.776277] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.776343] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.776343] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.776343] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.776343] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.776409] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.776409] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.776409] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.776409] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.776455] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.776711] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.776739] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.776765] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.776813] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.776813] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.776813] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.776813] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.776859] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.776911] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.776911] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.776911] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.776911] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.776977] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.776977] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.776977] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.776977] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.777043] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.777043] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.777043] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.777043] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.777089] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.777344] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.777373] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.777399] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.777447] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.777447] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.777447] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.777447] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.777493] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.777545] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.777545] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.777545] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.777545] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.777611] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.777611] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.777611] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.777611] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.777676] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.777676] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.777676] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.777676] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.777721] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.777977] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.778005] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.778031] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.778080] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.778080] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.778080] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.778080] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.778125] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.778176] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.778176] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.778176] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.778176] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.778242] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.778242] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.778242] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.778242] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.778308] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.778308] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.778308] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.778308] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.778353] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.778392] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C read 0x8008 length=10 failed
[ 6.778392]
[ 6.971543] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.971574] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.971602] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.971650] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.971650] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.971650] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.971650] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.971697] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.971749] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.971749] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.971749] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.971749] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.971815] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.971815] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.971815] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.971815] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.971883] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.971883] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.971883] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.971883] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.971930] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.972024] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.972293] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.972322] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.972349] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.972397] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.972397] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.972397] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.972397] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.972443] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.972494] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.972494] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.972494] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.972494] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.972561] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.972561] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.972561] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.972561] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.972775] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.972775] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.972775] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.972775] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.972848] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.972942] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.973162] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.973190] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.973217] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.973264] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.973264] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.973264] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.973264] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.973311] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.973363] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.973363] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.973363] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.973363] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.973429] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.973429] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.973429] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.973429] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.973497] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.973497] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.973497] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.973497] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.973543] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.973636] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.973901] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.973930] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.973956] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.974004] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.974004] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.974004] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.974004] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.974050] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.974102] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.974102] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.974102] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.974102] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.974169] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.974169] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.974169] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.974169] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.974236] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.974236] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.974236] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.974236] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.974282] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.974376] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.974641] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.974670] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.974696] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.974743] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.974743] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 6.974743] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 6.974743] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.974789] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.974840] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.974840] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 6.974840] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 6.974840] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.974907] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.974907] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.974907] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.974907] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.974974] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.974974] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 6.974974] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 6.974974] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 6.975019] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.975112] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 6.975153] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 6.975180] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 6.975428] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.975457] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.975484] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.975532] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.975532] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.975532] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.975532] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.975578] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.975630] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.975630] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.975630] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.975630] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.975696] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.975696] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.975696] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.975696] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.975762] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.975762] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.975762] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.975762] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.975808] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.976062] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.976091] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.976117] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.976165] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.976165] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.976165] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.976165] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.976211] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.976263] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.976263] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.976263] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.976263] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.976329] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.976329] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.976329] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.976329] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.976394] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.976394] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.976394] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.976394] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.976440] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.976696] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.976725] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.976752] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.976799] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.976799] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.976799] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.976799] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.976845] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.976897] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.976897] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.976897] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.976897] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.976963] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.976963] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.976963] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.976963] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.977029] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.977029] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.977029] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.977029] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.977074] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.977330] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.977358] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.977385] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.977433] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.977433] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.977433] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.977433] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.977479] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.977531] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.977531] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.977531] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.977531] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.977597] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.977597] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.977597] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.977597] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.977663] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.977663] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.977663] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.977663] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.977709] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.977962] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 6.977990] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 6.978017] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 6.978064] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 6.978064] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 6.978064] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 6.978064] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 6.978110] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 6.978162] (0)[1:swapper/0][name:i2c&]I2C register:
[ 6.978162] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 6.978162] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 6.978162] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 6.978228] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 6.978228] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.978228] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 6.978228] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.978294] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 6.978294] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 6.978294] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 6.978294] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 6.978339] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 6.978377] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C read 0x8008 length=10 failed
[ 6.978377]
[ 7.171542] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.171575] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.171603] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.171652] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.171652] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 7.171652] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 7.171652] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.171699] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.171752] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.171752] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 7.171752] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 7.171752] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.171819] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.171819] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.171819] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.171819] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.171887] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.171887] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 7.171887] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 7.171887] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 7.171933] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.172027] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 7.172384] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.172413] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.172440] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.172488] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.172488] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 7.172488] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 7.172488] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.172534] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.172587] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.172587] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 7.172587] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 7.172587] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.172653] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.172653] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.172653] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.172653] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.172721] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.172721] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 7.172721] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 7.172721] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 7.172767] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.172860] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 7.173130] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.173160] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.173186] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.173234] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.173234] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 7.173234] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 7.173234] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.173280] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.173333] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.173333] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 7.173333] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 7.173333] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.173400] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.173400] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.173400] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.173400] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.173468] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.173468] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 7.173468] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 7.173468] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 7.173513] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.173607] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 7.173872] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.173901] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.173928] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.173975] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.173975] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 7.173975] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 7.173975] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.174022] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.174074] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.174074] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 7.174074] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 7.174074] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.174141] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.174141] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.174141] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.174141] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.174209] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.174209] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 7.174209] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 7.174209] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 7.174255] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.174348] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 7.174613] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.174642] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.174669] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.174717] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.174717] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=1,Op=1,Poll_en=0,Irq_stat=3
[ 7.174717] [I2C]Trans_len=3,Trans_num=1,Trans_auxlen=0,Data_size=3,speed=300
[ 7.174717] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.174763] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.174816] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.174816] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=2c,TRANSFER_LEN=3
[ 7.174816] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1320
[ 7.174816] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.174882] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.174882] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.174882] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.174882] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.174950] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.174950] [I2C]INT_FLAG=1,INT_EN=0,EN=0,RST=0,
[ 7.174950] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2003, RX_MEM_ADDR=0
[ 7.174950] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=3030300
[ 7.174995] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.175089] (0)[1:swapper/0][name:i2c&]ERROR,421: id=1,addr: 5d, dma HW reset
[ 7.175130] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Write Error: 0x8041, 1 byte(s), err-code: -22
[ 7.175156] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma i2c write failed!
[ 7.175186] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> i2c read 0x8000, 10 bytes, double check failed!
[ 7.175212] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Failed to get chip-type, set chip type default: GOODIX_GT9
[ 7.175460] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.175489] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.175516] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.175563] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.175563] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.175563] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.175563] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.175610] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.175661] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.175661] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.175661] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.175661] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.175727] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.175727] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.175727] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.175727] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.175793] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.175793] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.175793] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.175793] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.175838] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.176091] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.176120] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.176146] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.176193] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.176193] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.176193] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.176193] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.176240] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.176292] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.176292] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.176292] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.176292] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.176358] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.176358] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.176358] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.176358] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.176424] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.176424] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.176424] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.176424] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.176469] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.176725] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.176754] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.176780] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.176827] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.176827] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.176827] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.176827] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.176874] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.176926] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.176926] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.176926] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.176926] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.176991] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.176991] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.176991] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.176991] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.177056] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.177056] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.177056] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.177056] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.177102] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.177356] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.177384] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.177411] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.177458] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.177458] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.177458] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.177458] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.177503] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.177556] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.177556] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.177556] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.177556] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.177622] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.177622] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.177622] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.177622] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.177688] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.177688] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.177688] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.177688] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.177733] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.177988] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.178018] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.178044] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.178092] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.178092] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.178092] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.178092] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.178139] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.178190] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.178190] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.178190] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.178190] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.178257] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.178257] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.178257] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.178257] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.178322] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.178322] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.178322] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.178322] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.178367] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.178408] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Read Error: 0x4220, 4 byte(s), err-code: -22
[ 7.178434] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma read failed
[ 7.178461] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP_REG_HW_INFO : 00000000
[ 7.178486] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 1.
[ 7.201465] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.201496] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.201523] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.201571] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.201571] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.201571] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.201571] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.201618] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.201670] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.201670] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.201670] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.201670] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.201736] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.201736] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.201736] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.201736] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.201803] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.201803] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.201803] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.201803] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.201848] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.202073] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.202102] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.202129] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.202177] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.202177] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.202177] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.202177] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.202223] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.202275] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.202275] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.202275] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.202275] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.202342] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.202342] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.202342] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.202342] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.202409] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.202409] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.202409] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.202409] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.202454] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.202674] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.202703] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.202729] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.202776] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.202776] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.202776] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.202776] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.202823] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.202875] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.202875] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.202875] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.202875] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.202942] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.202942] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.202942] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.202942] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.203008] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.203008] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.203008] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.203008] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.203053] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.203272] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.203300] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.203327] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.203374] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.203374] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.203374] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.203374] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.203420] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.203472] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.203472] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.203472] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.203472] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.203538] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.203538] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.203538] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.203538] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.203604] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.203604] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.203604] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.203604] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.203649] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.203869] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.203897] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.203923] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.203972] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.203972] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.203972] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.203972] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.204018] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.204070] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.204070] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.204070] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.204070] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.204136] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.204136] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.204136] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.204136] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.204202] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.204202] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.204202] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.204202] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.204248] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.204288] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Read Error: 0x4220, 4 byte(s), err-code: -22
[ 7.204314] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma read failed
[ 7.204341] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP_REG_HW_INFO : 00000000
[ 7.204367] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 2.
[ 7.231480] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.231511] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.231538] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.231586] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.231586] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.231586] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.231586] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.231632] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.231685] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.231685] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.231685] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.231685] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.231751] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.231751] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.231751] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.231751] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.231817] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.231817] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.231817] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.231817] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.231863] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.232088] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.232117] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.232144] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.232192] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.232192] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.232192] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.232192] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.232238] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.232290] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.232290] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.232290] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.232290] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.232356] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.232356] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.232356] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.232356] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.232422] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.232422] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.232422] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.232422] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.232468] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.232692] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.232721] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.232748] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.232795] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.232795] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.232795] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.232795] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.232842] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.232894] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.232894] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.232894] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.232894] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.232960] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.232960] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.232960] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.232960] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.233026] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.233026] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.233026] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.233026] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.233072] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.233292] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.233321] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.233348] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.233395] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.233395] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.233395] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.233395] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.233441] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.233492] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.233492] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.233492] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.233492] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.233558] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.233558] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.233558] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.233558] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.233624] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.233624] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.233624] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.233624] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.233669] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.233891] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.233920] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.233946] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.233994] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.233994] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.233994] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.233994] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.234040] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.234092] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.234092] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.234092] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.234092] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.234157] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.234157] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.234157] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.234157] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.234223] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.234223] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.234223] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.234223] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.234268] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.234308] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Read Error: 0x4220, 4 byte(s), err-code: -22
[ 7.234333] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma read failed
[ 7.234360] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP_REG_HW_INFO : 00000000
[ 7.234386] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 3.
[ 7.261464] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.261494] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.261521] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.261570] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.261570] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.261570] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.261570] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.261616] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.261668] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.261668] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.261668] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.261668] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.261735] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.261735] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.261735] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.261735] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.261800] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.261800] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.261800] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.261800] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.261845] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.262071] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.262101] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.262128] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.262176] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.262176] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.262176] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.262176] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.262223] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.262275] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.262275] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.262275] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.262275] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.262341] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.262341] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.262341] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.262341] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.262407] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.262407] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.262407] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.262407] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.262453] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.262675] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.262704] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.262730] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.262777] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.262777] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.262777] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.262777] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.262823] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.262875] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.262875] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.262875] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.262875] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.262941] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.262941] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.262941] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.262941] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.263006] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.263006] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.263006] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.263006] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.263052] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.263275] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.263304] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.263330] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.263377] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.263377] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.263377] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.263377] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.263424] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.263476] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.263476] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.263476] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.263476] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.263542] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.263542] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.263542] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.263542] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.263607] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.263607] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.263607] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.263607] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.263652] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.263876] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.263924] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.263950] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.263998] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.263998] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.263998] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.263998] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.264044] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.264096] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.264096] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.264096] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.264096] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.264162] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.264162] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.264162] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.264162] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.264227] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.264227] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.264227] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.264227] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.264273] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.264313] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Read Error: 0x4220, 4 byte(s), err-code: -22
[ 7.264339] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma read failed
[ 7.264366] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP_REG_HW_INFO : 00000000
[ 7.264392] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 4.
[ 7.291475] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.291507] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.291534] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.291582] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.291582] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.291582] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.291582] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.291630] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.291682] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.291682] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.291682] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.291682] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.291748] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.291748] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.291748] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.291748] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.291815] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.291815] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.291815] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.291815] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.291860] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.292081] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.292110] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.292136] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.292184] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.292184] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.292184] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.292184] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.292230] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.292282] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.292282] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.292282] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.292282] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.292348] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.292348] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.292348] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.292348] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.292413] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.292413] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.292413] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.292413] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.292459] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.292679] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.292708] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.292734] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.292782] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.292782] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.292782] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.292782] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.292827] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.292878] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.292878] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.292878] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.292878] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.292945] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.292945] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.292945] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.292945] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.293011] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.293011] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.293011] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.293011] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.293056] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.293275] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.293304] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.293330] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.293378] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.293378] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.293378] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.293378] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.293424] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.293475] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.293475] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.293475] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.293475] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.293541] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.293541] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.293541] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.293541] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.293607] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.293607] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.293607] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.293607] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.293653] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.293873] (0)[1:swapper/0][name:i2c&]ERROR,503: id=1,addr: 5d, transfer error
[ 7.293902] (0)[1:swapper/0][name:i2c&]ERROR,509: I2C_ACKERR
[ 7.293929] (0)[1:swapper/0][name:i2c&]I2C(1) dump info++++++++++++++++++++++
[ 7.293976] (0)[1:swapper/0][name:i2c&]I2C structure:
[ 7.293976] [I2C]Clk=13650,Id=1,Speed mode=1,St_rs=0,Dma_en=0,Op=1,Poll_en=0,Irq_stat=3
[ 7.293976] [I2C]Trans_len=2,Trans_num=1,Trans_auxlen=0,Data_size=ffff,speed=300
[ 7.293976] [I2C]Trans_stop=1,Trans_comp=1,Trans_error=2
[ 7.294022] (0)[1:swapper/0][name:i2c&]base address 0xe0f5e000
[ 7.294075] (0)[1:swapper/0][name:i2c&]I2C register:
[ 7.294075] [I2C]SLAVE_ADDR=ba,INTR_MASK=f8,INTR_STAT=0,CONTROL=28,TRANSFER_LEN=2
[ 7.294075] [I2C]TRANSAC_LEN=1,DELAY_LEN=2,TIMING=1016,START=0,FIFO_STAT=1210
[ 7.294075] [I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=1800,TRANSFER_LEN_AUX=0
[ 7.294141] (0)[1:swapper/0][name:i2c&]before enable DMA register(0x-520781312):
[ 7.294141] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.294141] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=5a1a2000, RX_MEM_ADDR=5a1a2000
[ 7.294141] [I2C]TX_LEN=3,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.294207] (0)[1:swapper/0][name:i2c&]DMA register(0xe0f58200):
[ 7.294207] [I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
[ 7.294207] [I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
[ 7.294207] [I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
[ 7.294252] (0)[1:swapper/0][name:i2c&]I2C(1) dump info------------------------------
[ 7.294292] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> Dma I2C Read Error: 0x4220, 4 byte(s), err-code: -22
[ 7.294318] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> dma read failed
[ 7.294345] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP_REG_HW_INFO : 00000000
[ 7.294371] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> GTP i2c test failed time 5.
[ 7.321281] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C communication ERROR!
[ 7.321311] (0)[1:swapper/0][name:gt9xx_driver&]<<-GTP-ERROR->> I2C communication ERROR!
[ 7.321382] (0)[1:swapper/0]gt9xx: probe of 1-005d failed with error -1
[ 7.322018] (0)[1:swapper/0][name:panic&]------------[ cut here ]------------
[ 7.322103] (0)[1:swapper/0][name:panic&]WARNING: CPU: 0 PID: 1 at /home/android/.jenkins/jobs/P6607_6.0_BLU_US_AMZ_TSDS/workspace/baseline/kernel-3.18/fs/sysfs/dir.c:31 sysfs_warn_dup+0x6c/0x7c()
[ 7.322135] (0)[1:swapper/0]sysfs: cannot create duplicate filename '/devices/platform/mt-pmic/regulator/regulator.11/soc:touch-vtouch'
[ 7.322174] (0)[1:swapper/0]CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.19+ #1
[ 7.322193] (0)[1:swapper/0]Backtrace:
[ 7.322256] (0)[1:swapper/0][<c00146e4>] (dump_backtrace) from [<c0014884>] (show_stack+0x18/0x1c)
[ 7.322278] (0)[1:swapper/0] r6:c0fb18dc r5:ffffffff r4:00000000 r3:00000000
[ 7.322369] (0)[1:swapper/0][<c001486c>] (show_stack) from [<c0ab918c>] (dump_stack+0x88/0xc8)
[ 7.322415] (0)[1:swapper/0][<c0ab9104>] (dump_stack) from [<c002a5a4>] (warn_slowpath_common+0xd0/0x140)
[ 7.322436] (0)[1:swapper/0] r6:00000009 r5:db44fc10 r4:c0f9027b r3:00000000
[ 7.322518] (0)[1:swapper/0][<c002a4d4>] (warn_slowpath_common) from [<c002a680>] (warn_slowpath_fmt+0x38/0x40)
[ 7.322538] (0)[1:swapper/0] r9:00000001 r8:ffffffef r7:00000000 r6:dae882d0 r5:db44fc98 r4:db70c000
[ 7.322637] (0)[1:swapper/0][<c002a64c>] (warn_slowpath_fmt) from [<c01ae078>] (sysfs_warn_dup+0x6c/0x7c)
[ 7.322658] (0)[1:swapper/0] r3:db70cfcf r2:c0c9ce1c
[ 7.322726] (0)[1:swapper/0][<c01ae00c>] (sysfs_warn_dup) from [<c01ae300>] (sysfs_do_create_link_sd.isra.2+0xc4/0xc8)
[ 7.322748] (0)[1:swapper/0] r6:dae882d0 r5:db44fc98 r4:db6c3fa0
[ 7.322825] (0)[1:swapper/0][<c01ae23c>] (sysfs_do_create_link_sd.isra.2) from [<c01ae354>] (sysfs_create_link+0x34/0x40)
[ 7.322846] (0)[1:swapper/0] r9:00000000 r8:dae86640 r7:c0e412d0 r6:db6c5210 r5:dae86600 r4:da031680
[ 7.322946] (0)[1:swapper/0][<c01ae320>] (sysfs_create_link) from [<c02cd4e0>] (create_regulator+0xbc/0x348)
[ 7.322989] (0)[1:swapper/0][<c02cd424>] (create_regulator) from [<c02cd850>] (_regulator_get+0xe4/0x288)
[ 7.323010] (0)[1:swapper/0] r8:c10ab448 r7:c0e412d0 r6:dae86600 r5:c112712c r4:db6c5210
[ 7.323103] (0)[1:swapper/0][<c02cd76c>] (_regulator_get) from [<c02ce5c0>] (regulator_get+0x18/0x1c)
[ 7.323124] (0)[1:swapper/0] r10:00000002 r9:c134cb80 r8:c10ab448 r7:c0ff8b68 r6:c0ff8b6c r5:da19b800
[ 7.323197] (0)[1:swapper/0] r4:c134c608
[ 7.323250] (0)[1:swapper/0][<c02ce5a8>] (regulator_get) from [<c07ad940>] (tpd_local_init+0x2c/0x160)
[ 7.323295] (0)[1:swapper/0][<c07ad914>] (tpd_local_init) from [<c079db8c>] (tpd_probe+0x284/0x778)
[ 7.323315] (0)[1:swapper/0] r5:c134c5a8 r4:c134c6f8
[ 7.323381] (0)[1:swapper/0][<c079d908>] (tpd_probe) from [<c02f120c>] (platform_drv_probe+0x4c/0xac)
[ 7.323401] (0)[1:swapper/0] r10:00000000 r9:00000008 r8:c0ff8344 r7:c112783c r6:c0ff8344 r5:fffffdfb
[ 7.323475] (0)[1:swapper/0] r4:db6c5210
[ 7.323527] (0)[1:swapper/0][<c02f11c0>] (platform_drv_probe) from [<c02ef5e8>] (driver_probe_device+0x140/0x3a0)
[ 7.323548] (0)[1:swapper/0] r7:c112783c r6:c103ee48 r5:db6c5210 r4:c1127830
[ 7.323629] (0)[1:swapper/0][<c02ef4a8>] (driver_probe_device) from [<c02ef928>] (__driver_attach+0x94/0x98)
[ 7.323651] (0)[1:swapper/0] r10:c0f5b31c r9:da19c980 r8:00000000 r7:00000000 r6:db6c5244 r5:c0ff8344
[ 7.323723] (0)[1:swapper/0] r4:db6c5210
[ 7.323772] (0)[1:swapper/0][<c02ef894>] (__driver_attach) from [<c02edabc>] (bus_for_each_dev+0x68/0x9c)
[ 7.323821] (0)[1:swapper/0] r6:c02ef894 r5:c0ff8344 r4:00000000 r3:00000000
[ 7.323902] (0)[1:swapper/0][<c02eda54>] (bus_for_each_dev) from [<c02ef9d8>] (driver_attach+0x24/0x28)
[ 7.323923] (0)[1:swapper/0] r6:c0fb61c8 r5:da19b700 r4:c0ff8344
[ 7.323992] (0)[1:swapper/0][<c02ef9b4>] (driver_attach) from [<c02ee494>] (bus_add_driver+0x15c/0x218)
[ 7.324032] (0)[1:swapper/0][<c02ee338>] (bus_add_driver) from [<c02f0494>] (driver_register+0x80/0x100)
[ 7.324053] (0)[1:swapper/0] r7:db44e000 r6:c0f2a220 r5:00000000 r4:c0ff8344
[ 7.324136] (0)[1:swapper/0][<c02f0414>] (driver_register) from [<c02f1d04>] (__platform_driver_register+0x5c/0x64)
[ 7.324157] (0)[1:swapper/0] r5:00000000 r4:33d4df21
[ 7.324224] (0)[1:swapper/0][<c02f1ca8>] (__platform_driver_register) from [<c0f2a23c>] (tpd_device_init+0x1c/0x5c)
[ 7.324268] (0)[1:swapper/0][<c0f2a220>] (tpd_device_init) from [<c0eeaf80>] (do_one_initcall+0xe0/0x260)
[ 7.324309] (0)[1:swapper/0][<c0eeaea0>] (do_one_initcall) from [<c0eeb244>] (kernel_init_freeable+0x144/0x22c)
[ 7.324330] (0)[1:swapper/0] r10:c0f5b31c r9:0000012f r8:c0eea650 r7:c10cb000 r6:c10cb000 r5:c0f5b314
[ 7.324404] (0)[1:swapper/0] r4:00000007
[ 7.324459] (0)[1:swapper/0][<c0eeb100>] (kernel_init_freeable) from [<c0ab2954>] (kernel_init+0x20/0x184)
[ 7.324480] (0)[1:swapper/0] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0f90180
[ 7.324552] (0)[1:swapper/0] r4:c10cb000
[ 7.324608] (0)[1:swapper/0][<c0ab2934>] (kernel_init) from [<c000f920>] (ret_from_fork+0x14/0x34)
[ 7.324628] (0)[1:swapper/0] r6:00000000 r5:c0ab2934 r4:00000000 r3:db44e000
[ 7.324779] (0)[1:swapper/0][name:panic&]---[ end trace 623c99c4209afe94 ]---
[ 7.324815] (0)[1:swapper/0][name:core&]vgp1: could not add device link soc:touch err -17
[ 7.324867] (0)[1:swapper/0][name:core&]vgp1: Failed to create debugfs directory
[ 7.695597] -(0)[1:swapper/0][name:panic&]------------[ cut here ]------------
[ 7.695655] -(0)[1:swapper/0][name:panic&]WARNING: CPU: 0 PID: 1 at /home/android/.jenkins/jobs/P6607_6.0_BLU_US_AMZ_TSDS/workspace/baseline/kernel-3.18/kernel/irq/manage.c:454 __enable_irq+0x50/0x8c()
[ 7.695685] -(0)[1:swapper/0]Unbalanced enable for IRQ 298
[ 7.695721] -(0)[1:swapper/0]CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.19+ #1
[ 7.695740] -(0)[1:swapper/0]Backtrace:
[ 7.695803] -(0)[1:swapper/0][<c00146e4>] (dump_backtrace) from [<c0014884>] (show_stack+0x18/0x1c)
[ 7.695825] -(0)[1:swapper/0] r6:c0fb18dc r5:ffffffff r4:00000000 r3:00000000
[ 7.695915] -(0)[1:swapper/0][<c001486c>] (show_stack) from [<c0ab918c>] (dump_stack+0x88/0xc8)
[ 7.695961] -(0)[1:swapper/0][<c0ab9104>] (dump_stack) from [<c002a5a4>] (warn_slowpath_common+0xd0/0x140)
[ 7.695982] -(0)[1:swapper/0] r6:00000009 r5:db44fb90 r4:c0f9027b r3:db44e000
[ 7.696065] -(0)[1:swapper/0][<c002a4d4>] (warn_slowpath_common) from [<c002a680>] (warn_slowpath_fmt+0x38/0x40)
[ 7.696086] -(0)[1:swapper/0] r9:00000000 r8:c134cb80 r7:dafec600 r6:c134ce20 r5:0000012a r4:c0f7f080
[ 7.696185] -(0)[1:swapper/0][<c002a64c>] (warn_slowpath_fmt) from [<c009f3f4>] (__enable_irq+0x50/0x8c)
[ 7.696206] -(0)[1:swapper/0] r3:0000012a r2:c0c89eac
[ 7.696273] -(0)[1:swapper/0][<c009f3a4>] (__enable_irq) from [<c009f470>] (enable_irq+0x40/0x78)
[ 7.696294] -(0)[1:swapper/0] r4:c0f7f080
[ 7.696349] -(0)[1:swapper/0][<c009f430>] (enable_irq) from [<c07ae810>] (tpd_probe+0x27c/0x3e4)
[ 7.696369] -(0)[1:swapper/0] r5:daf5f000 r4:da02ec00
[ 7.696434] -(0)[1:swapper/0][<c07ae594>] (tpd_probe) from [<c07b5c48>] (i2c_device_probe+0xe4/0x140)
[ 7.696455] -(0)[1:swapper/0] r10:00000000 r9:00000008 r8:c07ae594 r7:dafec600 r6:dafec604 r5:dafec620
[ 7.696529] -(0)[1:swapper/0] r4:c0b6dc7c
[ 7.696585] -(0)[1:swapper/0][<c07b5b64>] (i2c_device_probe) from [<c02ef5e8>] (driver_probe_device+0x140/0x3a0)
[ 7.696606] -(0)[1:swapper/0] r8:c100f210 r7:c112783c r6:c103ee48 r5:dafec620 r4:c1127830 r3:c07b5b64
[ 7.696701] -(0)[1:swapper/0][<c02ef4a8>] (driver_probe_device) from [<c02ef928>] (__driver_attach+0x94/0x98)
[ 7.696721] -(0)[1:swapper/0] r10:00000002 r9:c134cb80 r8:c10ab448 r7:00000000 r6:dafec654 r5:c100f210
[ 7.696795] -(0)[1:swapper/0] r4:dafec620
[ 7.696844] -(0)[1:swapper/0][<c02ef894>] (__driver_attach) from [<c02edabc>] (bus_for_each_dev+0x68/0x9c)
[ 7.696864] -(0)[1:swapper/0] r6:c02ef894 r5:c100f210 r4:00000000 r3:00000000
[ 7.696944] -(0)[1:swapper/0][<c02eda54>] (bus_for_each_dev) from [<c02ef9d8>] (driver_attach+0x24/0x28)
[ 7.696964] -(0)[1:swapper/0] r6:c100f3e4 r5:da030300 r4:c100f210
[ 7.697034] -(0)[1:swapper/0][<c02ef9b4>] (driver_attach) from [<c02ee494>] (bus_add_driver+0x15c/0x218)
[ 7.697074] -(0)[1:swapper/0][<c02ee338>] (bus_add_driver) from [<c02f0494>] (driver_register+0x80/0x100)
[ 7.697095] -(0)[1:swapper/0] r7:c0ff8b68 r6:c0ff8b6c r5:da19b800 r4:c100f210
[ 7.697176] -(0)[1:swapper/0][<c02f0414>] (driver_register) from [<c07b7404>] (i2c_register_driver+0x38/0x184)
[ 7.697197] -(0)[1:swapper/0] r5:da19b800 r4:c100f1ec
[ 7.697258] -(0)[1:swapper/0][<c07b73cc>] (i2c_register_driver) from [<c07ad990>] (tpd_local_init+0x7c/0x160)
[ 7.697279] -(0)[1:swapper/0] r5:da19b800 r4:c134c608
[ 7.697342] -(0)[1:swapper/0][<c07ad914>] (tpd_local_init) from [<c079db8c>] (tpd_probe+0x284/0x778)
[ 7.697363] -(0)[1:swapper/0] r5:c134c5a8 r4:c134c6f8
[ 7.697426] -(0)[1:swapper/0][<c079d908>] (tpd_probe) from [<c02f120c>] (platform_drv_probe+0x4c/0xac)
[ 7.697447] -(0)[1:swapper/0] r10:00000000 r9:00000008 r8:c0ff8344 r7:c112783c r6:c0ff8344 r5:fffffdfb
[ 7.697520] -(0)[1:swapper/0] r4:db6c5210
[ 7.697571] -(0)[1:swapper/0][<c02f11c0>] (platform_drv_probe) from [<c02ef5e8>] (driver_probe_device+0x140/0x3a0)
[ 7.697592] -(0)[1:swapper/0] r7:c112783c r6:c103ee48 r5:db6c5210 r4:c1127830
[ 7.697674] -(0)[1:swapper/0][<c02ef4a8>] (driver_probe_device) from [<c02ef928>] (__driver_attach+0x94/0x98)
[ 7.697695] -(0)[1:swapper/0] r10:c0f5b31c r9:da19c980 r8:00000000 r7:00000000 r6:db6c5244 r5:c0ff8344
[ 7.697767] -(0)[1:swapper/0] r4:db6c5210
[ 7.697816] -(0)[1:swapper/0][<c02ef894>] (__driver_attach) from [<c02edabc>] (bus_for_each_dev+0x68/0x9c)
[ 7.697837] -(0)[1:swapper/0] r6:c02ef894 r5:c0ff8344 r4:00000000 r3:00000000
[ 7.697916] -(0)[1:swapper/0][<c02eda54>] (bus_for_each_dev) from [<c02ef9d8>] (driver_attach+0x24/0x28)
[ 7.697936] -(0)[1:swapper/0] r6:c0fb61c8 r5:da19b700 r4:c0ff8344
[ 7.698006] -(0)[1:swapper/0][<c02ef9b4>] (driver_attach) from [<c02ee494>] (bus_add_driver+0x15c/0x218)
[ 7.698046] -(0)[1:swapper/0][<c02ee338>] (bus_add_driver) from [<c02f0494>] (driver_register+0x80/0x100)
[ 7.698067] -(0)[1:swapper/0] r7:db44e000 r6:c0f2a220 r5:00000000 r4:c0ff8344
[ 7.698151] -(0)[1:swapper/0][<c02f0414>] (driver_register) from [<c02f1d04>] (__platform_driver_register+0x5c/0x64)
[ 7.698172] -(0)[1:swapper/0] r5:00000000 r4:33d4df21
[ 7.698238] -(0)[1:swapper/0][<c02f1ca8>] (__platform_driver_register) from [<c0f2a23c>] (tpd_device_init+0x1c/0x5c)
[ 7.698282] -(0)[1:swapper/0][<c0f2a220>] (tpd_device_init) from [<c0eeaf80>] (do_one_initcall+0xe0/0x260)
[ 7.698323] -(0)[1:swapper/0][<c0eeaea0>] (do_one_initcall) from [<c0eeb244>] (kernel_init_freeable+0x144/0x22c)
[ 7.698343] -(0)[1:swapper/0] r10:c0f5b31c r9:0000012f r8:c0eea650 r7:c10cb000 r6:c10cb000 r5:c0f5b314
[ 7.698416] -(0)[1:swapper/0] r4:00000007
[ 7.698471] -(0)[1:swapper/0][<c0eeb100>] (kernel_init_freeable) from [<c0ab2954>] (kernel_init+0x20/0x184)
[ 7.698491] -(0)[1:swapper/0] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0f90180
[ 7.698563] -(0)[1:swapper/0] r4:c10cb000
[ 7.698619] -(0)[1:swapper/0][<c0ab2934>] (kernel_init) from [<c000f920>] (ret_from_fork+0x14/0x34)
[ 7.698639] -(0)[1:swapper/0] r6:00000000 r5:c0ab2934 r4:00000000 r3:db44e000
[ 7.698707] -(0)[1:swapper/0][name:panic&]---[ end trace 623c99c4209afe95 ]---
[ 7.700593] (0)[1:swapper/0][name:input_core&]input: mtk-tpd as /devices/virtual/input/input6
[ 7.701953] (0)[1:swapper/0][name:main&]initcall tpd_device_init+0x0/0x5c returned 0 after 6661278 usecs
[ 7.702003] (0)[1:swapper/0][name:bootprof&]BOOTPROF: 7701.986556:tpd_device_init 6821209016 ns
[ 7.702064] (0)[1:swapper/0]calling rtc_hctosys+0x0/0x17c @ 1
[ 7.702979] (0)[1:swapper/0]mt-rtc mt-rtc: setting system clock to 2017-09-22 22:10:30 UTC (1506118230)
[ 7.703022] (0)[1:swapper/0][name:main&]initcall rtc_hctosys+0x0/0x17c returned 0 after 897 usecs
[ 7.703079] (0)[1:swapper/0]calling battery_init+0x0/0x208 @ 1
[ 7.706014] (0)[1:swapper/0][name:battery_common&]******** battery_dts_probe!! ********
[ 7.707160] (0)[1:swapper/0]mediatek-mt6735-pinctrl 0.pinctrl: pin GPIO8 already requested by soc:bat_comm; cannot claim for battery
[ 7.707203] (0)[1:swapper/0]mediatek-mt6735-pinctrl 0.pinctrl: pin-8 (battery) status -22
[ 7.707245] (0)[1:swapper/0]mediatek-mt6735-pinctrl 0.pinctrl: could not request pin 8 (GPIO8) from group GPIO8 on device 0.pinctrl
[ 7.707280] (0)[1:swapper/0]battery battery: Error applying setting, reverse things back
[ 7.707395] (0)[1:swapper/0][name:battery_common&]******** battery driver probe!! ********
[ 7.707715] (0)[1:swapper/0][name:battery_common&][BAT_probe] adc_cali prepare : done !!
[ 7.707715]
[ 7.707750] (0)[1:swapper/0][name:charging_hw_pmic&]get_boot_mode=0
[ 7.707775] (0)[1:swapper/0][name:battery_common&][BAT_probe] g_platform_boot_mode = 0
[ 7.707775]
[ 7.708303] (0)[1:swapper/0][name:battery_common&][BAT_probe] power_supply_register AC Success !!
[ 7.709073] (0)[1:swapper/0][name:battery_common&][BAT_probe] power_supply_register USB Success !!
[ 7.709637] (0)[1:swapper/0][name:battery_common&][BAT_probe] power_supply_register WIRELESS Success !!
[ 7.710673] (0)[1:swapper/0][name:battery_common&][BAT_probe] power_supply_register Battery Success !!
[ 7.711582] (0)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 442000 KHz
[ 7.711992] (0)[1:swapper/0][name:battery_common&]battery_kthread_hrtimer_init : done
[ 7.712170] (0)[1:swapper/0][name:battery_common&][battery_probe] bat_thread_kthread Done
[ 7.712576] (0)[1:swapper/0][name:battery_common&]charger_hv_detect_sw_workaround_init : done
[ 7.712638] (0)[1:swapper/0][name:battery_common&]proc_create bat_proc_fops
[ 7.713805] (0)[1:swapper/0][name:battery_common&]******** mt_batteryNotify_dts_probe!! ********
[ 7.714577] (0)[1:swapper/0][name:battery_common&]******** mt_batteryNotify_probe!! ********
[ 7.714664] (0)[1:swapper/0][name:battery_common&]proc_create battery_cmd_proc_fops
[ 7.714693] (0)[1:swapper/0][name:battery_common&]proc_create current_cmd_proc_fops
[ 7.714721] (0)[1:swapper/0][name:battery_common&]proc_create discharging_cmd_proc_fops
[ 7.714739] (0)[1:swapper/0][name:battery_common&]******** mtk_battery_cmd!! ********
[ 7.715023] (0)[1:swapper/0][name:battery_common&]****[battery_driver] Initialization : DONE !!
[ 7.715059] (0)[1:swapper/0][name:main&]initcall battery_init+0x0/0x208 returned 0 after 11663 usecs
[ 7.715100] (0)[1:swapper/0]calling init_wk+0x0/0x34c @ 1
[ 7.715539] -(0)[0:swapper/0][name:mt_idle&][Power/swap]DP: No enter --- SODI: No enter ---
[ 7.715587] -(0)[0:swapper/0][name:mt_idle&][Power/swap]CNT(dpidle,rgidle): [0] = (0,498), [1] = (0,475), [2] = (0,451), [3] = (0,225),
[ 7.715617] -(0)[0:swapper/0][name:mt_idle&][Power/swap]dpidle_block_cnt: [by_cpu] = 1559, [by_clk] = 971, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
[ 7.715651] -(0)[0:swapper/0][name:mt_idle&][Power/swap]dpidle_block_mask: 0x00000002, 0x00100001, 0x0007cc03, 0x0000000c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[ 7.725674] (0)[181:wdtk-0][WDK], local_bit:0x0, cpu:0,RT[7725660325]
[ 7.725692] (0)[181:wdtk-0][WDK], local_bit:0x1, cpu:0, check bit0x:f, lasthpg_cpu:0, lasthpg_act:1, lasthpg_t:7715146171, RT[7725678017]
[ 7.725720] (0)[181:wdtk-0][thread:181][RT:7725697786] 2017-09-22 22:10:30.522765 UTC;android time 2017-09-22 22:10:30.522765
[ 7.756274] (0)[1:swapper/0][name:wd_common_drv&][WDK] WDT start kicker done CPU_NR=4
[ 7.756355] (0)[1:swapper/0][name:cpu&][cpu_ntf] <00>c07cef40 (wk_cpu_callback)
[ 7.756557] (0)[1:swapper/0][name:wd_common_drv&][WDK]init_wk done late_initcall cpus_kick_bit=0x1 -----
[ 7.756589] (0)[1:swapper/0][name:main&]initcall init_wk+0x0/0x34c returned 0 after 40488 usecs
[ 7.756620] (0)[1:swapper/0][name:bootprof&]BOOTPROF: 7756.609325:init_wk 41514769 ns
[ 7.756665] (0)[1:swapper/0]calling emmc_rpmb_init+0x0/0x104 @ 1
[ 7.756922] (0)[1:swapper/0][name:main&]initcall emmc_rpmb_init+0x0/0x104 returned 0 after 221 usecs
[ 7.756958] (0)[1:swapper/0]calling lowmem_init+0x0/0xd4 @ 1
[ 7.756984] (0)[1:swapper/0][name:lowmemorykiller&]lowmemorykiller: [LMK]total_low_ratio[3] - totalram_pages[236518] - totalhigh_pages[127791]
[ 7.757011] (0)[1:swapper/0][name:main&]initcall lowmem_init+0x0/0xd4 returned 0 after 27 usecs
[ 7.757046] (0)[1:swapper/0]calling sync_debugfs_init+0x0/0x40 @ 1
[ 7.757109] (0)[1:swapper/0][name:main&]initcall sync_debugfs_init+0x0/0x40 returned 0 after 36 usecs
[ 7.757144] (0)[1:swapper/0]calling clk_debug_init+0x0/0x138 @ 1
[ 7.773492] -(0)[179:bat_thread_kthr][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 7.785494] (0)[179:bat_thread_kthr][name:battery_common&]UI_SOC=(6), resetBatteryMeter=(0)
[ 7.785530] -(0)[179:bat_thread_kthr][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 7.787327] (0)[1:swapper/0][name:main&]initcall clk_debug_init+0x0/0x138 returned 0 after 29441 usecs
[ 7.787361] (0)[1:swapper/0][name:bootprof&]BOOTPROF: 7787.350017:clk_debug_init 30210154 ns
[ 7.787402] (0)[1:swapper/0]calling tcp_congestion_default+0x0/0x1c @ 1
[ 7.787430] (0)[1:swapper/0][name:main&]initcall tcp_congestion_default+0x0/0x1c returned 0 after 3 usecs
[ 7.787467] (0)[1:swapper/0]calling ip_auto_config+0x0/0x188c @ 1
[ 7.787524] (0)[1:swapper/0][name:main&]initcall ip_auto_config+0x0/0x188c returned 0 after 30 usecs
[ 7.787564] (0)[1:swapper/0]calling regulator_init_complete+0x0/0x2b8 @ 1
[ 7.787716] (0)[1:swapper/0][name:core&]vm: disabling
[ 7.787739] (0)[1:swapper/0][name:core&]vm: couldn't disable: -1
[ 7.787785] (0)[1:swapper/0][name:core&]vsram: disabling
[ 7.787804] (0)[1:swapper/0][name:core&]vsram: couldn't disable: -1
[ 7.787920] (0)[1:swapper/0][name:core&]vaud28: disabling
[ 7.787939] (0)[1:swapper/0][name:core&]vaud28: couldn't disable: -1
[ 7.787969] (0)[1:swapper/0][name:main&]initcall regulator_init_complete+0x0/0x2b8 returned 0 after 368 usecs
[ 7.788016] (0)[1:swapper/0]calling late_init_to_lowpwr_opp+0x0/0x28c @ 1
[ 7.788039] (0)[1:swapper/0][name:mt_vcore_dvfs_1&][VcoreFS] MMDVFS_PROFILE_D1
[ 7.788674] -(0)[1:swapper/0][name:mt_dramc&][DFS]dfs_dummy_buffer va: 0xc1286000, dst_pa: 0x41286000, size: 256
[ 7.790255] (0)[1:swapper/0][name:mt_vcore_dvfs_1&][VcoreFS] [late_init_to_lowpwr_opp] feature_en: 1, late_init_opp: 1
[ 7.790287] (0)[1:swapper/0][name:main&]initcall late_init_to_lowpwr_opp+0x0/0x28c returned 0 after 2189 usecs
[ 7.790331] (0)[1:swapper/0]calling init_get_cache_work+0x0/0x80 @ 1
[ 7.790364] (0)[1:swapper/0][name:main&]initcall init_get_cache_work+0x0/0x80 returned 0 after 5 usecs
[ 7.790406] (0)[1:swapper/0]calling init_get_dump_work+0x0/0x80 @ 1
[ 7.790438] (0)[1:swapper/0][name:main&]initcall init_get_dump_work+0x0/0x80 returned 0 after 4 usecs
[ 7.790483] (0)[1:swapper/0]calling clk_disable_unused+0x0/0x12c @ 1
[ 7.790784] (0)[1:swapper/0][name:main&]initcall clk_disable_unused+0x0/0x12c returned 0 after 265 usecs
[ 7.790826] (0)[1:swapper/0]calling alsa_sound_last_init+0x0/0x74 @ 1
[ 7.790843] (0)[1:swapper/0]ALSA device list:
[ 7.790861] (0)[1:swapper/0] #0: mt-snd-card
[ 7.790890] (0)[1:swapper/0][name:main&]initcall alsa_sound_last_init+0x0/0x74 returned 0 after 37 usecs
[ 7.791610] (0)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1231mv, freq = 1300000 KHz
[ 7.791779] (0)[1:swapper/0][name:tuxonice_core&][HIB/TOI] [toi_sys_power_disk_try_resume()]step 1 @line:1034
[ 7.791795] (0)[1:swapper/0][name:tuxonice_core&][HIB/TOI] [toi_start_anything()]hibernate_or_resume(0x0000000a), resume_file=""
[ 7.791808] (0)[1:swapper/0][name:tuxonice_bio&][HIB/TOI] [try_to_open_resume_device()]commandline=""
[ 7.791816] (0)[1:swapper/0][name:tuxonice_bio&][HIB/TOI] [try_to_open_resume_device()]skip scanning for image...
[ 7.791843] (0)[1:swapper/0][name:tuxonice_core&]TuxOnIce: No matching enabled allocator found. Resuming disabled
[ 7.792214] (0)[1:swapper/0][name:page_alloc&]Freeing unused kernel memory: 520K (c0eea000 - c0f6c000)
[ 7.792233] (0)[1:swapper/0][name:bootprof&]BOOTPROF: 7792.228017:Kernel_init_done
[ 7.794656] (0)[1:init]init: init started!
[ 7.802382] (0)[1:init]SELinux: 2048 avtab hash slots, 13849 rules.
[ 7.812745] (0)[1:init]SELinux: 2048 avtab hash slots, 13849 rules.
[ 7.812782] (0)[1:init]SELinux: 1 users, 2 roles, 1343 types, 0 bools, 1 sens, 1024 cats
[ 7.812796] (0)[1:init]SELinux: 87 classes, 13849 rules
[ 7.815895] (0)[1:init]SELinux: Permission audit_read in class capability2 not defined in policy.
[ 7.815925] (0)[1:init]SELinux: the above unknown classes and permissions will be denied
[ 7.815962] (0)[1:init]SELinux: Completing initialization.
[ 7.815968] (0)[1:init]SELinux: Setting up existing superblocks.
[ 7.815994] (0)[1:init]SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 7.816081] (0)[1:init]SELinux: initialized (dev bdev, type bdev), not configured for labeling
[ 7.816101] (0)[1:init]SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.816135] (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.816161] (0)[1:init]SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 7.839556] (0)[1:init]SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.839580] (0)[1:init]SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.839595] (0)[1:init]SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[ 7.839607] (0)[1:init]SELinux: initialized (dev aio, type aio), not configured for labeling
[ 7.839622] (0)[1:init]SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 7.839653] (0)[1:init]SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 7.839742] (0)[1:init]SELinux: initialized (dev configfs, type configfs), not configured for labeling
[ 7.839755] (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.839787] (0)[1:init]SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.868720] (0)[1:init][name:audit&]audit: type=1403 audit(1506118230.650:2): policy loaded auid=4294967295 ses=4294967295
[ 7.869137] (0)[1:init][name:audit&]audit: type=1404 audit(1506118230.650:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 7.891390] (0)[1:init]init: (Initializing SELinux enforcing took 0.10s.)
[ 7.910618] (0)[1:init]init: init second stage started!
[ 7.911561] (0)[1:init]init: PropSet Error:[ro.boot.hardware:mt6735] ro.* properties may NEVER be modified once set
[ 7.911583] (0)[1:init]init: property_set("ro.boot.hardware", "mt6735") failed
[ 7.911624] (0)[1:init]init: PropSet Error:[ro.boot.serialno:MNJFYPM7QSZ9RCLV] ro.* properties may NEVER be modified once set
[ 7.911642] (0)[1:init]init: property_set("ro.boot.serialno", "MNJFYPM7QSZ9RCLV") failed
[ 7.990397] (0)[1:init]init: waitpid failed: No child processes
[ 7.990685] (0)[1:init]init: (Loading properties from /default.prop took 0.00s.)
[ 7.991312] (0)[179:bat_thread_kthr][name:pmic_chr_type_det&]CDP, block
[ 7.992502] (0)[1:init]init: (Parsing /init.environ.rc took 0.00s.)
[ 7.992684] (0)[1:init]init: (Parsing /init.usb.rc took 0.00s.)
[ 7.993595] (0)[1:init]init: /init.mt6735.rc: 356: invalid command 'mknod'
[ 7.993754] (0)[1:init]init: /init.mt6735.rc: 483: invalid command 'mknod'
[ 7.993778] (0)[1:init]init: /init.mt6735.rc: 490: invalid command 'mknod'
[ 7.994093] (0)[1:init]init: /init.mt6735.rc: 790: invalid option 'setprop'
[ 7.994114] (0)[1:init]init: /init.mt6735.rc: 791: invalid option 'setprop'
[ 7.994133] (0)[1:init]init: /init.mt6735.rc: 792: invalid option 'setprop'
[ 7.994153] (0)[1:init]init: /init.mt6735.rc: 793: invalid option 'setprop'
[ 7.994172] (0)[1:init]init: /init.mt6735.rc: 794: invalid option 'setprop'
[ 7.994191] (0)[1:init]init: /init.mt6735.rc: 795: invalid option 'setprop'
[ 7.994210] (0)[1:init]init: /init.mt6735.rc: 796: invalid option 'setprop'
[ 7.994229] (0)[1:init]init: /init.mt6735.rc: 797: invalid option 'setprop'
[ 7.994248] (0)[1:init]init: /init.mt6735.rc: 798: invalid option 'setprop'
[ 7.994267] (0)[1:init]init: /init.mt6735.rc: 799: invalid option 'setprop'
[ 7.994286] (0)[1:init]init: /init.mt6735.rc: 801: invalid option 'setprop'
[ 7.995459] (0)[1:init]init: /init.mt6735.rc: 1501: invalid command 'chomd'
[ 7.995523] (0)[1:init]init: /init.mt6735.rc: 1529: invalid option 'enabled'
[ 7.995591] (0)[1:init]init: /init.mt6735.rc: 1565: invalid option 'disable'
[ 7.995776] (0)[1:init]init: init.project.rc: 41: invalid command 'mknod'
[ 7.995852] (0)[1:init]init: init.project.rc: 103: invalid command 'mknod'
[ 7.995906] (0)[1:init]init: init.project.rc: 142: ignored duplicate definition of service 'atci_service'
[ 7.995936] (0)[1:init]init: init.project.rc: 148: ignored duplicate definition of service 'atcid-daemon-u'
[ 7.995965] (0)[1:init]init: init.project.rc: 154: ignored duplicate definition of service 'atcid-daemon-e'
[ 7.996000] (0)[1:init]init: init.project.rc: 163: ignored duplicate definition of service 'audio-daemon'
[ 7.996056] (0)[1:init]init: init.project.rc: 190: ignored duplicate definition of service 'vtservice'
[ 7.997256] (0)[1:init]init: (Parsing init.mt6735.usb.rc took 0.00s.)
[ 7.997306] (0)[1:init]init: (Parsing init.project.rc took 0.00s.)
[ 7.997358] (0)[1:init]init: could not import file '/FWUpgradeInit.rc' from '/init.mt6735.rc'
[ 7.997467] (0)[1:init]init: (Parsing init.xlog.rc took 0.00s.)
[ 7.997565] (0)[1:init]init: could not import file '/init.preload.rc' from 'init.aee.rc'
[ 7.997586] (0)[1:init]init: (Parsing init.aee.rc took 0.00s.)
[ 7.997623] (0)[1:init]init: could not import file 'init.fon.rc' from '/init.mt6735.rc'
[ 7.997657] (0)[1:init]init: could not import file 'init.volte.rc' from '/init.mt6735.rc'
[ 7.997691] (0)[1:init]init: could not import file 'init.mal.rc' from '/init.mt6735.rc'
[ 7.997724] (0)[1:init]init: could not import file 'init.wfca.rc' from '/init.mt6735.rc'
[ 7.997758] (0)[1:init]init: could not import file 'init.epdg.rc' from '/init.mt6735.rc'
[ 7.997792] (0)[1:init]init: could not import file 'init.trustonic.rc' from '/init.mt6735.rc'
[ 7.997863] (0)[1:init]init: (Parsing init.common_svc.rc took 0.00s.)
[ 7.997904] (0)[1:init]init: could not import file 'init.microtrust.rc' from '/init.mt6735.rc'
[ 7.998111] (0)[1:init]init: init.modem.rc: 76: invalid service name 'ril-daemon-mtkmd2'
[ 7.998151] (0)[1:init]init: init.modem.rc: 94: ignored duplicate definition of service 'md_minilog_util'
[ 7.998229] (0)[1:init]init: init.modem.rc: 127: ignored duplicate definition of service 'pppd_gprs'
[ 7.998287] (0)[1:init]init: (Parsing init.modem.rc took 0.00s.)
[ 7.998306] (0)[1:init]init: (Parsing /init.mt6735.rc took 0.01s.)
[ 7.998400] (0)[1:init]init: (Parsing /init.zygote32.rc took 0.00s.)
[ 7.998510] (0)[1:init]init: (Parsing /init.trace.rc took 0.00s.)
[ 7.998529] (0)[1:init]init: (Parsing /init.rc took 0.01s.)
[ 7.998814] (0)[1:init]init: getMemTotalSize memTotalSize= 946592 init: memTotalSize= 946592
[ 7.998975] (0)[1:init]init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[ 7.999049] (0)[1:init]init: Starting service 'ueventd'...
[ 7.999553] (0)[1:init]init: Waiting for /dev/.coldboot_done...
[ 8.001417] (0)[185:ueventd]ueventd: ueventd started!
[ 8.025452] (0)[92:hps_main][name:mt_smp&]Boot slave CPU
[ 8.025470] (0)[92:hps_main][name:mt_smp&][Power/hotplug] mt_smp_boot_secondary, cpu: 1
[ 8.025643] -(1)[0:swapper/1]CPU1: Booted secondary processor
[ 8.025653] -(1)[0:swapper/1][name:mt_smp&][Power/hotplug] platform_secondary_init, cpu: 1
[ 8.025756] -(1)[0:swapper/1]CPU1: update cpu_capacity 1024
[ 8.025765] -(1)[0:swapper/1]CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 8.026247] (0)[92:hps_main][name:mt_hotplug_strategy_algo&][HPS] (0020)(1)action end(100)(101)(0)(0) (4)(4)(4)(4)(1) (127)(59)(1) (0)(0)(0) (1)(101)(60)(0)(101) wifi_base(0)
[ 8.347932] (1)[185:ueventd]ueventd: Coldboot took 0.33s.
[ 8.353296] (0)[1:init]init: Waiting for /dev/.coldboot_done took 0.35s.
[ 8.353366] (0)[1:init]init: /dev/hw_random not found
[ 8.353432] (0)[1:init]init: could not open /dev/keychord: No such file or directory
[ 8.354816] (0)[1:init][name:bootprof&]BOOTPROF: 8354.808865:INIT: on init start
[ 8.355496] (0)[1:init]SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.355810] (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.357014] (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.359922] (0)[1:init]init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[ 8.360132] (0)[1:init]init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
[ 8.361482] (0)[1:init]SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.361685] (0)[1:init]init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
[ 8.364451] (0)[1:init]SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 8.364703] (0)[1:init]init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
[ 8.365167] (0)[1:init]SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.366616] (0)[1:init]init: /dev/hw_random not found
[ 8.366940] (0)[1:init][name:bootprof&]BOOTPROF: 8366.933711:INIT:Mount_START
[ 8.367769] (1)[186:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system
[ 8.367898] (1)[186:init]fs_mgr: __mount: target='/system, encryptable=0
[ 8.367913] (1)[186:init]fs_mgr: __mount: 'nvdata' partition exists!
[ 8.373687] (1)[186:init]EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null)
[ 8.373726] (1)[186:init]SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
[ 8.373808] (1)[186:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system,target=/system,type=ext4)=0
[ 8.373914] (1)[186:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
[ 8.374404] (1)[186:init]EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 8.383669] (1)[186:init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.383697] (1)[186:init]SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
[ 8.383769] (1)[186:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata,/data,ext4)=0: Success
[ 8.424487] (1)[186:init]fs_mgr: check_fs(): unmount(/data) succeeded
[ 8.425304] (1)[186:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
[ 8.481602] (1)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 819000 KHz
[ 8.482500] (1)[186:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.482500]
[ 8.482558] (1)[186:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata: clean, 4189/268752 files, 306908/1073024 blocks
[ 8.482558]
[ 8.482767] (1)[186:init]fs_mgr: Running /system/bin/resize_ext4 on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
[ 8.512605] (1)[193:resize_ext4]resize: Size for partition(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata) is 4292096K.
[ 8.512652] (1)[193:resize_ext4]resize: Size in superblock is 4292096K.
[ 8.512699] (1)[193:resize_ext4]resize: Size will (maybe) resize to(after adjust) is 4292096K.
[ 8.512741] (1)[193:resize_ext4]resize: The size of data already meet the request(size in superblock = size after adjust).
[ 8.512871] (1)[193:resize_ext4]resize: Partition has been resized,so nothing to do!
[ 8.512899] (1)[193:resize_ext4]resize: Resize ext4 return 0
[ 8.514050] (0)[186:init]fs_mgr: Resize ext4 return 0
[ 8.514916] (0)[186:init]EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 8.518934] (0)[186:init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.518968] (0)[186:init]SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
[ 8.519062] (0)[186:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata,/data,ext4)=0: Success
[ 8.564825] (0)[186:init]fs_mgr: check_fs(): unmount(/data) succeeded
[ 8.564877] (0)[186:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
[ 8.624582] (1)[186:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.624582]
[ 8.624640] (1)[186:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata: clean, 4189/268752 files, 306908/1073024 blocks
[ 8.624640]
[ 8.624864] (1)[186:init]fs_mgr: __mount: target='/data, encryptable=0
[ 8.624889] (0)[186:init]fs_mgr: __mount: 'nvdata' partition exists!
[ 8.629277] (0)[186:init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 8.629317] (0)[186:init]SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
[ 8.629403] (0)[186:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata,target=/data,type=ext4)=0
[ 8.630016] (0)[186:init]fs_mgr: Success: get encrypted status: 0x0 in MISC
[ 8.630052] (0)[186:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
[ 8.630573] (0)[186:init]EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 8.634195] (0)[186:init]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.634230] (0)[186:init]SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
[ 8.634314] (0)[186:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache,/cache,ext4)=0: Success
[ 8.664758] (0)[186:init]fs_mgr: check_fs(): unmount(/cache) succeeded
[ 8.664807] (0)[186:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
[ 8.695998] (1)[186:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.695998]
[ 8.696053] (1)[186:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache: clean, 20/25600 files, 3384/102400 blocks
[ 8.696053]
[ 8.696271] (1)[186:init]fs_mgr: __mount: target='/cache, encryptable=0
[ 8.696296] (0)[186:init]fs_mgr: __mount: 'nvdata' partition exists!
[ 8.702683] (0)[186:init]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 8.702724] (0)[186:init]SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
[ 8.702809] (0)[186:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache,target=/cache,type=ext4)=0
[ 8.702846] (0)[186:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
[ 8.703427] (0)[186:init]EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[ 8.706765] (1)[186:init]EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.706798] (1)[186:init]SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
[ 8.706887] (1)[186:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1,/protect_f,ext4)=0: Success
[ 8.744723] (0)[186:init]fs_mgr: check_fs(): unmount(/protect_f) succeeded
[ 8.744775] (0)[186:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
[ 8.773837] (1)[186:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.773837]
[ 8.773894] (1)[186:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1: clean, 15/640 files, 1083/2560 blocks
[ 8.773894]
[ 8.774113] (1)[186:init]fs_mgr: __mount: target='/protect_f, encryptable=0
[ 8.774139] (1)[186:init]fs_mgr: __mount: 'nvdata' partition exists!
[ 8.778449] (1)[186:init]EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,commit=1,nodelalloc
[ 8.778488] (1)[186:init]SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
[ 8.778568] (1)[186:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1,target=/protect_f,type=ext4)=0
[ 8.778604] (1)[186:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
[ 8.779064] (1)[186:init]EXT4-fs (mmcblk0p4): Ignoring removed nomblk_io_submit option
[ 8.781360] (0)[61:kworker/0:1][name:mt_dump&]get expdb info
[ 8.788558] (1)[186:init]EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.788590] (1)[186:init]SELinux: initialized (dev mmcblk0p4, type ext4), uses xattr
[ 8.788683] (1)[186:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2,/protect_s,ext4)=0: Success
[ 8.824795] (0)[186:init]fs_mgr: check_fs(): unmount(/protect_s) succeeded
[ 8.824848] (0)[186:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
[ 8.827562] (0)[92:hps_main]CPU1: shutdown
[ 8.827585] (0)[92:hps_main][name:hotplug&][Power/hotplug] mt_cpu_kill, cpu: 1
[ 8.828932] (0)[92:hps_main][name:mt_hotplug_strategy_algo&][HPS] (0200)(2)action end(59)(40)(0)(0) (4)(4)(4)(4)(1) (120)(8)(0) (664)(8)(0) (0)(40)(8)(0)(40) wifi_base(0)
[ 8.841632] (0)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1231mv, freq = 1300000 KHz
[ 8.861916] (0)[186:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.861916]
[ 8.861961] (0)[186:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2: clean, 14/640 files, 1082/2560 blocks
[ 8.861961]
[ 8.862143] (0)[186:init]fs_mgr: __mount: target='/protect_s, encryptable=0
[ 8.862160] (0)[186:init]fs_mgr: __mount: 'nvdata' partition exists!
[ 8.867928] (0)[186:init]EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,commit=1,nodelalloc
[ 8.867960] (0)[186:init]SELinux: initialized (dev mmcblk0p4, type ext4), uses xattr
[ 8.868017] (0)[186:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2,target=/protect_s,type=ext4)=0
[ 8.868045] (0)[186:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
[ 8.868522] (0)[186:init]EXT4-fs (mmcblk0p18): Ignoring removed nomblk_io_submit option
[ 8.871749] (0)[186:init]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.871774] (0)[186:init]SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr
[ 8.871847] (0)[186:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata,/nvdata,ext4)=0: Success
[ 8.904419] (0)[186:init]fs_mgr: check_fs(): unmount(/nvdata) succeeded
[ 8.904455] (0)[186:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
[ 8.931957] (0)[186:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.931957]
[ 8.932001] (0)[186:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata: clean, 469/2048 files, 1721/8192 blocks
[ 8.932001]
[ 8.932184] (0)[186:init]fs_mgr: __mount: target='/nvdata, encryptable=0
[ 8.932201] (0)[186:init]fs_mgr: __mount: 'nvdata' partition exists!
[ 8.936080] (0)[186:init]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 8.936109] (0)[186:init]SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr
[ 8.936170] (0)[186:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata,target=/nvdata,type=ext4)=0
[ 8.938463] (0)[1:init]init: Starting service 'exec 0 (/system/bin/tune2fs)'...
[ 8.986797] (0)[1:init]init: Service 'exec 0 (/system/bin/tune2fs)' (pid 219) exited with status 0
[ 8.986924] (0)[1:init][name:bootprof&]BOOTPROF: 8986.916559:INIT:Mount_END
[ 8.988578] (0)[1:init]ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8.988971] (0)[1:init]ISOFS: changing to secondary root
[ 8.989071] (0)[1:init]SELinux: initialized (dev loop0, type iso9660), uses genfs_contexts
[ 8.990012] (0)[1:init]SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
[ 8.990550] (0)[1:init]init: Starting service 'logd'...
[ 8.997956] (0)[1:init]init: service 'logd' still running, return directly
[ 8.999507] (0)[1:init]init: Starting service 'vold'...
[ 9.002786] (0)[1:init]init: Not bootcharting.
[ 9.029303] (0)[92:hps_main][name:mt_smp&]Boot slave CPU
[ 9.029322] (0)[92:hps_main][name:mt_smp&][Power/hotplug] mt_smp_boot_secondary, cpu: 1
[ 9.029499] -(1)[0:swapper/1]CPU1: Booted secondary processor
[ 9.029509] -(1)[0:swapper/1][name:mt_smp&][Power/hotplug] platform_secondary_init, cpu: 1
[ 9.029615] -(1)[0:swapper/1]CPU1: update cpu_capacity 1024
[ 9.029623] -(1)[0:swapper/1]CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 9.030121] (0)[92:hps_main][name:mt_hotplug_strategy_algo&][HPS] (0020)(1)action end(100)(191)(0)(0) (4)(4)(4)(4)(1) (71)(1)(1) (0)(0)(0) (1)(191)(2)(0)(191) wifi_base(0)
[ 9.051974] (0)[221:logd]logd.auditd: start
[ 9.088872] (0)[1:init]init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
[ 9.130425] (0)[92:hps_main][name:mt_smp&]Boot slave CPU
[ 9.130441] (0)[92:hps_main][name:mt_smp&][Power/hotplug] mt_smp_boot_secondary, cpu: 2
[ 9.130612] -(2)[0:swapper/2]CPU2: Booted secondary processor
[ 9.130622] -(2)[0:swapper/2][name:mt_smp&][Power/hotplug] platform_secondary_init, cpu: 2
[ 9.130721] -(2)[0:swapper/2]CPU2: update cpu_capacity 1024
[ 9.130730] -(2)[0:swapper/2]CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 9.131497] (0)[92:hps_main][name:mt_smp&]Boot slave CPU
[ 9.131510] (0)[92:hps_main][name:mt_smp&][Power/hotplug] mt_smp_boot_secondary, cpu: 3
[ 9.131693] -(3)[0:swapper/3]CPU3: Booted secondary processor
[ 9.131705] -(3)[0:swapper/3][name:mt_smp&][Power/hotplug] platform_secondary_init, cpu: 3
[ 9.131812] -(3)[0:swapper/3]CPU3: update cpu_capacity 1024
[ 9.131822] -(3)[0:swapper/3]CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 9.132358] (0)[92:hps_main][name:mt_hotplug_strategy_algo&][HPS] (0020)(2)action end(198)(307)(0)(0) (4)(4)(4)(4)(1) (0)(0)(0) (0)(0)(0) (1)(307)(1)(0)(307) wifi_base(0)
[ 9.138342] (0)[1:init]init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 229) exited with status 0
[ 9.153226] (0)[1:init]init: write_file: Unable to open '/sys/class/misc/md32/md32_boot': No such file or directory
[ 9.176418] (0)[1:init]init: Starting service 'exec 2 (/system/bin/rm)'...
[ 9.191640] (0)[1:init]init: Service 'exec 2 (/system/bin/rm)' (pid 231) exited with status 0
[ 9.194461] (0)[1:init][name:bootprof&]BOOTPROF: 9194.449328:post-fs-data: on modem start
[ 9.198593] (0)[1:init]init: PropSet Error:[ro.sf.lcd_density:320] ro.* properties may NEVER be modified once set
[ 9.198621] (0)[1:init]init: property_set("ro.sf.lcd_density", "320") failed
[ 9.200185] (0)[1:init]init: PropSet Error:[ro.sys.usb.storage.type:mtp,mass_storage] ro.* properties may NEVER be modified once set
[ 9.200203] (0)[1:init]init: property_set("ro.sys.usb.storage.type", "mtp,mass_storage") failed
[ 9.203473] (0)[1:init]init: (Loading properties from /system/build.prop took 0.01s.)
[ 9.203545] (0)[1:init]init: can not load properties (null) from /vendor/build.prop
[ 9.203570] (0)[1:init]init: (Loading properties from /vendor/build.prop took 0.00s.)
[ 9.203605] (0)[1:init]init: can not load properties ro.* from /factory/factory.prop
[ 9.203626] (0)[1:init]init: (Loading properties from /factory/factory.prop took 0.00s.)
[ 9.204368] (0)[1:init]random: init urandom read with 47 bits of entropy available
[ 9.399043] (1)[1:init]init: action requeue to tail before execute act 0xb6f188b0
[ 9.409708] (1)[1:init]init: service 'logd' still running, return directly
[ 9.409917] (1)[1:init]init: Starting service 'logd-reinit'...
[ 9.411637] (3)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1012mv, freq = 819000 KHz
[ 9.415256] (1)[1:init]init: service 'ueventd' still running, return directly
[ 9.415297] (1)[1:init]init: service 'logd' still running, return directly
[ 9.415343] (1)[1:init]init: Starting service 'healthd'...
[ 9.416482] (1)[1:init]init: Starting service 'lmkd'...
[ 9.417615] (1)[1:init]init: Starting service 'servicemanager'...
[ 9.418193] (1)[1:init]init: service 'vold' still running, return directly
[ 9.418792] (3)[234:healthd][name:binder&]binder: 234:234 binder_context_mgr_node is NULL
[ 9.418798] (1)[1:init]init: Starting service 'surfaceflinger'...
[ 9.418824] (3)[234:healthd][name:binder&]binder: 234:234 transaction failed 29189, size 0-0
[ 9.418842] (3)[234:healthd][name:binder&]binder: read put err 29189 to user b6ee3008, thread error 29189:29185
[ 9.419924] (1)[1:init]init: Starting service 'bootlogoupdater'...
[ 9.420994] (1)[1:init]init: Starting service 'wmtLoader'...
[ 9.422142] (1)[1:init]init: Starting service 'conn_launcher'...
[ 9.423233] (1)[1:init]init: Starting service 'ccci_fsd'...
[ 9.424236] (1)[1:init]init: Starting service 'ccci_mdinit'...
[ 9.424858] (1)[1:init]init: cannot find '/system/bin/ccci_rpcd', disabling 'ccci_rpcd'
[ 9.425410] (1)[1:init]init: Starting service 'terservice'...
[ 9.426531] (1)[1:init]init: Starting service 'xlogboot'...
[ 9.431695] (0)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1231mv, freq = 1300000 KHz
[ 9.453759] (2)[236:servicemanager]binder: [name:binder&]236:236 set as servicemanager uid 1000
[ 9.467214] (3)[239:wmt_loader][name:wmt_detect&][WMT-DETECT][I]wmt_detect_open:open major 154 minor 0 (pid 239)
[ 9.467616] (3)[239:wmt_loader][name:wmt_detect&][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (1074034433),arg(801)
[ 9.467632] (3)[239:wmt_loader][name:mtk_wcn_stub_alps&]set current consys chipid (0x321)
[ 9.467697] (3)[239:wmt_loader][name:wmt_detect&][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191035),arg(26421)
[ 9.467930] (3)[239:wmt_loader][name:sdio_detect&][SDIO-DETECT][I]sdio_detect_exit:sdio_unregister_driver
[ 9.467944] (3)[239:wmt_loader][name:wmt_detect&][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191036),arg(26421)
[ 9.467954] (3)[239:wmt_loader][name:common_drv_init&][WMT-MOD-INIT][I]do_common_drv_init:start to do common driver init, chipid:0x00006735
[ 9.470882] (0)[223:logd.daemon]logd.daemon: reinit
[ 9.477052] (2)[1:init]init: Service 'logd-reinit' (pid 232) exited with status 0
[ 9.484734] (0)[241:ccci_fsd][name:ccci&][md1]port ccci_fs open with flag 20002 by ccci_fsd
[ 9.488565] (2)[1:init]init: Starting service 'enableswap'...
[ 9.489523] (2)[1:init]init: avc: denied { set } for property=persist.log.tag scontext=u:r:xlog:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
[ 9.489587] (2)[1:init]init: sys_prop: permission denied uid:0 name:persist.log.tag
[ 9.490099] (2)[1:init]init: Starting service 'netd'...
[ 9.491004] (2)[1:init]init: Starting service 'debuggerd'...
[ 9.492317] (2)[1:init]init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 9.492375] (2)[1:init]init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 9.493068] (2)[1:init]init: Starting service 'drm'...
[ 9.494317] (2)[1:init]init: Starting service 'media'...
[ 9.495908] (2)[1:init]init: Starting service 'installd'...
[ 9.497213] (2)[1:init]init: Starting service 'flash_recovery'...
[ 9.498216] (2)[1:init]init: Starting service 'keystore'...
[ 9.499113] (2)[1:init]init: Starting service 'mobile_log_d'...
[ 9.499582] (2)[1:init]init: cannot find '/system/bin/met_log_d', disabling 'met_log_d'
[ 9.500004] (2)[1:init]init: Starting service 'netdiag'...
[ 9.500796] (2)[1:init]init: Starting service 'nvram_daemon'...
[ 9.503610] (2)[1:init]init: Starting service 'pq'...
[ 9.506168] (2)[1:init]init: Starting service 'aal'...
[ 9.507744] (2)[1:init]init: Starting service 'DMAgent'...
[ 9.508669] (2)[1:init]init: Starting service 'PPLAgent'...
[ 9.511111] (2)[1:init]init: cannot find '/system/bin/cmmbsp', disabling 'cmmb'
[ 9.511256] (2)[1:init]init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
[ 9.511763] (2)[1:init]init: Starting service 'agpsd'...
[ 9.512674] (2)[1:init]init: Starting service 'slpd'...
[ 9.513650] (2)[1:init]init: Starting service 'wifi2agps'...
[ 9.520432] (2)[1:init]init: Starting service 'mnld'...
[ 9.520950] (2)[1:init]init: cannot find '/system/bin/extmdlogger', disabling 'extmdlogger'
[ 9.521000] (2)[1:init]init: cannot find '/system/bin/GoogleOtaBinder', disabling 'GoogleOtaAgent'
[ 9.521047] (2)[1:init]init: cannot find '/system/bin/md_monitor', disabling 'md_monitor'
[ 9.521549] (2)[1:init]init: Starting service 'msensord'...
[ 9.522442] (2)[1:init]init: Starting service 'NvRAMAgent'...
[ 9.523291] (2)[1:init]init: Starting service 'thermal_manager'...
[ 9.524175] (2)[1:init]init: Starting service 'thermal'...
[ 9.540459] (0)[250:sh]zram0: detected capacity change from 0 to 268435456
[ 9.542901] (2)[1:init]init: Starting service 'thermald'...
[ 9.543707] (2)[1:init]init: Starting service 'fuelgauged'...
[ 9.544177] (2)[1:init]init: cannot find '/system/bin/poad', disabling 'poad'
[ 9.544583] (2)[1:init]init: Starting service 'batterywarning'...
[ 9.545029] (2)[1:init]init: cannot find '/system/bin/br_app_data_service', disabling 'backuprestore'
[ 9.545443] (2)[1:init]init: Starting service 'MtkCodecService'...
[ 9.546278] (2)[1:init]init: Starting service 'guiext-server'...
[ 9.546730] (2)[1:init]init: cannot find '/system/bin/dongled', disabling 'usbdongled'
[ 9.547157] (2)[1:init]init: Starting service 'vtservice'...
[ 9.547673] (2)[1:init]init: cannot find '/system/bin/permission_check', disabling 'permission_check'
[ 9.548133] (2)[1:init]init: Starting service 'zygote'...
[ 9.548695] (2)[1:init]init: avc: denied { set } for property=persist.log.tag scontext=u:r:xlog:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
[ 9.548719] (2)[1:init]init: sys_prop: permission denied uid:0 name:persist.log.tag
[ 9.549180] (2)[1:init]init: Starting service 'gatekeeperd'...
[ 9.549695] (2)[1:init]init: cannot find '/system/xbin/perfprofd', disabling 'perfprofd'
[ 9.549749] (2)[1:init]init: service 'enableswap' still running, return directly
[ 9.550182] (2)[1:init]init: Starting service 'sn'...
[ 9.565187] (2)[1:init][name:fork&][1:init] fork fail retval:0xfffffdff
[ 9.565212] (2)[1:init][name:fork&][1:init] fork fail:[fffffdff, -513]
[ 9.566205] (2)[1:init]init: Starting service 'program_binary'...
[ 9.566730] (2)[1:init]init: cannot find '/system/bin/hotknot_native_service', disabling 'hotknot_native'
[ 9.566955] (2)[1:init]init: avc: denied { set } for property=persist.log.tag scontext=u:r:xlog:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
[ 9.566979] (2)[1:init]init: sys_prop: permission denied uid:0 name:persist.log.tag
[ 9.567707] (2)[1:init]init: Starting service 'emsvr_user'...
[ 9.568636] (2)[1:init]init: Service 'terservice' (pid 243) exited with status 0
[ 9.568887] (2)[1:init]init: Service 'xlogboot' (pid 244) exited with status 0
[ 9.569388] (2)[1:init][name:g_android&][g_android][USB]enable_store: device_attr->attr.name: enable
[ 9.569406] (2)[1:init][name:g_android&][g_android]android_usb: already disabled
[ 9.569417] (2)[1:init][name:usb20&][MUSB]usb_cable_connected 592: type(0)
[ 9.569450] (2)[17:kworker/2:0][name:g_android&][g_android][USB]enable_store: enable 0->0 case - no usb cable
[ 9.569477] (2)[17:kworker/2:0][name:usb20&][MUSB]usb_cable_connected 592: type(0)
[ 9.569488] (2)[17:kworker/2:0][name:g_android&][g_android][USB]android_work: is_hwconnected=0
[ 9.569499] (2)[17:kworker/2:0][name:g_android&][g_android][USB]android_work: did not send uevent (0 0 (null))
[ 9.569552] (2)[17:kworker/2:0][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=HWDISCONNECTED
[ 9.569561] (2)[17:kworker/2:0][name:g_android&][g_android][USB]android_work: did not send zero uevent
[ 9.589880] (2)[1:init]init: Service 'msensord' (pid 269) exited with status 254
[ 9.590247] (2)[1:init][name:g_android&][g_android][USB]functions_store
[ 9.590260] (2)[1:init][name:g_android&][g_android][USB]functions_store: name = mtp
[ 9.590271] (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = mtp, f->name=ffs
[ 9.590280] (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = mtp, f->name=adb
[ 9.590288] (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = mtp, f->name=acm
[ 9.590297] (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = mtp, f->name=mtp
[ 9.590305] (2)[1:init][name:g_android&][g_android][USB]functions_store: name = adb
[ 9.590313] (2)[1:init][name:g_android&][g_android][USB]android_enable_function: name = ffs, f->name=ffs
[ 9.590370] (2)[1:init][name:g_android&][g_android][USB]enable_store: device_attr->attr.name: enable
[ 9.590382] (2)[1:init][name:g_android&][g_android][USB]enable function 'mtp'/c0ff7dc0
[ 9.590390] (2)[1:init][name:g_android&][g_android][USB]enable function 'ffs'/c0ff75a8
[ 9.590400] (2)[1:init][name:g_android&][g_android][USB]enable_store: enable 0->1 case, device_desc.idVendor = 0xe8d, device_desc.idProduct = 0x201d
[ 9.590488] (2)[1:init]init: Starting service 'adbd'...
[ 9.593281] (3)[239:wmt_loader][name:mtk_hibernate_dpm&][HIB/SwSuspHlper] reg. func 6:0xc05e3734 with device (null)
[ 9.600986] (1)[259:netdiag][name:capability&]capability: warning: `netdiag' uses 32-bit capabilities (legacy support in use)
[ 9.601675] (2)[1:init]init: Starting service 'xlogdebugchanged'...
[ 9.608399] (3)[239:wmt_loader][name:conn_md_bridge&][CONN-MD-DFT][W]conn_md_add_user:uid (0x80000003) is added to user list successfully
[ 9.608500] (3)[239:wmt_loader][name:common_drv_init&][WMT-MOD-INIT][I]do_common_drv_init:finish common driver init
[ 9.608511] (3)[239:wmt_loader][name:bluetooth_drv_init&][BT-MOD-INIT][I]do_bluetooth_drv_init:start to do bluetooth driver init
[ 9.608798] (3)[239:wmt_loader][name:stp_chrdev_bt&][MTK-BT] BT_init: mtk_stp_BT_chrdev driver(major 192) installed
[ 9.608810] (3)[239:wmt_loader][name:bluetooth_drv_init&][BT-MOD-INIT][I]do_bluetooth_drv_init:finish bluetooth driver init, i_ret:0
[ 9.608821] (3)[239:wmt_loader][name:gps_drv_init&][GPS-MOD-INIT][I]do_gps_drv_init:start to do gps driver init
[ 9.608995] (3)[239:wmt_loader][name:stp_chrdev_gps&]mtk_stp_GPS_chrdev driver(major 191) installed.
[ 9.609005] (3)[239:wmt_loader][name:gps_drv_init&][GPS-MOD-INIT][I]do_gps_drv_init:finish gps driver init, i_ret:0
[ 9.609014] (3)[239:wmt_loader][name:fm_drv_init&][FM-MOD-INIT][I]do_fm_drv_init:start to do fm module init
[ 9.609024] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]fm_env_setup
[ 9.609032] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]1. fm callback registered
[ 9.609049] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]2. fm low ops registered
[ 9.609060] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]3. fm rds ops registered
[ 9.609081] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]4. fm locks created
[ 9.609090] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]5. fm timer created
[ 9.609101] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | LINK]fm link setup
[ 9.609120] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | LINK]cmd_fifo created
[ 9.609136] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | LINK]evt_fifo created
[ 9.609821] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]mt_fm_probe
[ 9.610841] (2)[290:adbd][name:g_android&][g_android]read descriptors
[ 9.610868] (2)[290:adbd][name:g_android&][g_android]read descriptors
[ 9.610883] (2)[290:adbd][name:g_android&][g_android]read strings
[ 9.610925] (2)[290:adbd][name:g_android&][g_android][USB]android_bind_enabled_functions:
[ 9.610938] (2)[290:adbd][name:g_android&][g_android][USB]bind_config function 'mtp'/c0ff7dc0
[ 9.610947] (2)[290:adbd]mtp_bind_config
[ 9.610960] (2)[290:adbd]android_usb gadget: adding 'mtp'/da18fa00 to config 'android'/c0ff7534
[ 9.610970] (2)[290:adbd]mtp_function_bind dev: da18fa00
[ 9.611009] (2)[290:adbd][name:g_android&][g_android][USB]bind_config function 'ffs'/c0ff75a8
[ 9.611022] (2)[290:adbd]android_usb gadget: adding 'Function FS Gadget'/d9f2aaa4 to config 'android'/c0ff7534
[ 9.611041] (2)[290:adbd]android_usb gadget: cfg 1/c0ff7534 speeds: high full
[ 9.611053] (2)[290:adbd][name:musb_hdrc&][MUSB]musb_gadget_pullup 2545: is_on=1, softconnect=0 ++
[ 9.611065] (2)[290:adbd][name:usb20&][MUSB]usb_cable_connected 592: type(0)
[ 9.611075] (2)[290:adbd][name:usb20&][MUSB]set_usb_rdy 52: set usb_rdy, wake up bat
[ 9.611087] (2)[290:adbd][name:battery_common&][BATTERY] wake_up_bat.
[ 9.611101] (2)[290:adbd][name:musb_hdrc&][MUSB]musb_pullup 2488: MUSB: gadget pull up 1 start
[ 9.611115] (2)[290:adbd][name:musb_hdrc&][MUSB]musb_pullup 2498: no USB cable, don't need to turn on USB
[ 9.611126] (2)[290:adbd][name:musb_hdrc&][MUSB]musb_pullup 2508: MUSB: gadget pull up 1 end
[ 9.621522] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 FM default config
[ 9.621541] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 rssi_l: -296
[ 9.621550] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 rssi_s: -296
[ 9.621558] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 pamd_th: -12
[ 9.621566] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 mr_th: -67
[ 9.621574] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 atdc_th: 3496
[ 9.621582] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 prx_th: 64
[ 9.621589] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 atdev_th: 0
[ 9.621597] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 smg_th: 16421
[ 9.621604] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]de_emphasis: 0
[ 9.621612] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]osc_freq: 0
[ 9.621620] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]aud path[1]I2S state[1]mode[0]rate[0]
[ 9.628033] (2)[1:init]init: avc: denied { set } for property=persist.log.tag scontext=u:r:xlog:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
[ 9.628069] (2)[1:init]init: sys_prop: permission denied uid:0 name:persist.log.tag
[ 9.629207] (2)[1:init]init: Service 'xlogdebugchanged' (pid 289) exited with status 0
[ 9.633798] -(2)[295:sh][name:mt_ptp&][PTP] ptp_set_ptp_volt cur_temp = 45300
[ 9.641309] (2)[179:bat_thread_kthr][name:pmic_chr_type_det&]CDP, free
[ 9.641417] (2)[179:bat_thread_kthr][name:usb20_phy&][MUSB]Charger_Detect_Init 654: Charger_Detect_Init
[ 9.650129] (3)[275:batterywarning][name:battery_common&][Battery] show_BatteryNotify : 0
[ 9.679066] (0)[252:debuggerd][name:aed&]aed_ee_open:10:59
[ 9.679101] (0)[252:debuggerd][name:aed&]aed_ke_open:(aed1)10:58
[ 9.679252] (0)[252:debuggerd][name:aed&]aed_ee_open:10:59
[ 9.679366] (0)[252:debuggerd][name:aed&]set aee mode = 4
[ 9.771738] (2)[301:tiny_swapon][name:swapfile&]Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
[ 9.788466] (0)[274:fuelgauged][name:core&]__sched_setscheduler 276:MtkCodecService sched_priority=268435532
[ 9.798036] (0)[274:fuelgauged]MTK_FG: get control socket error, reason:Protocol not supported
[ 9.798102] (0)[274:fuelgauged]MTK_FG: [fg_res] FG_DAEMON_CMD_SET_DAEMON_PID, input 274
[ 9.881313] (2)[179:bat_thread_kthr][name:pmic_chr_type_det&]step A2 : Standard USB Host!
[ 9.881411] (2)[179:bat_thread_kthr][name:usb20_phy&][MUSB]Charger_Detect_Release 664: Charger_Detect_Release
[ 9.881423] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_connect 413: is ready 1 is_host 0 power 0
[ 9.881432] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_connect 437: cable_mode=1
[ 9.881444] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_connect 479: lock
[ 9.881454] (2)[179:bat_thread_kthr][name:musb_hdrc&][MUSB]musb_start 1221: start, is_host=0 is_active=1
[ 9.881465] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_enable 292: <0,0>,<2,2,1,1>
[ 9.881535] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_enable 313: enable UPLL before connect
[ 9.881545] (2)[179:bat_thread_kthr][name:usb20&][MUSB]vcore_hold 154: before releasing
[ 9.881553] (2)[179:bat_thread_kthr][name:usb20&][MUSB]vcore_hold 157: after releasing
[ 9.881577] (2)[179:bat_thread_kthr][name:usb20&][MUSB]vcore_hold 163: hold VCORE ok
[ 9.885149] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_unbind unbinding OK
[ 9.885183] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_unbind unbinding OK
[ 9.885207] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_unbind unbinding OK
[ 9.885231] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_unbind unbinding OK
[ 9.885274] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_unbind unbinding OK
[ 9.885608] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_bind binding OK, 0
[ 9.885651] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_bind binding OK, 2
[ 9.885711] (0)[271:thermal_manager][name:mtk_ts_cpu&][Power/CPU_Thermal]tscpu_bind binding OK, 1
[ 9.889897] (0)[271:thermal_manager][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1181):thermal command can not be send: STP is not ready
[ 9.889915] (0)[271:thermal_manager][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(204):thermal ctrl function not supported
[ 9.889925] (0)[271:thermal_manager][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1181):thermal command can not be send: STP is not ready
[ 9.889934] (0)[271:thermal_manager][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(204):thermal ctrl function not supported
[ 9.889944] (0)[271:thermal_manager][name:osal&][WMT-LIB][E]wmt_lib_is_therm_ctrl_support(1181):thermal command can not be send: STP is not ready
[ 9.889953] (0)[271:thermal_manager][name:osal&][WMT-EXP][E]_mtk_wcn_wmt_therm_ctrl(204):thermal ctrl function not supported
[ 9.890520] (0)[271:thermal_manager][name:linear_charging&][BATTERY] set_bat_charging_current_limit (650)
[ 9.890532] (0)[271:thermal_manager][name:linear_charging&][BATTERY] set_bat_charging_current_limit over usb spec(65000,45000)
[ 9.890540] (0)[271:thermal_manager][name:battery_common&][BATTERY] wake_up_bat3.
[ 9.892498] (2)[179:bat_thread_kthr][name:usb20_phy&][MUSB]HQA_special 22: HQA, 0x18, before:86
[ 9.892524] (2)[179:bat_thread_kthr][name:usb20_phy&][MUSB]HQA_special 26: HQA, 0x18, after:86
[ 9.892549] (2)[179:bat_thread_kthr][name:usb20_phy&][MUSB]hs_slew_rate_cal 269: [USBPHY]slew calibration:FM_OUT =329,x=4183,value=4
[ 9.892566] (2)[179:bat_thread_kthr][name:usb20_phy&][MUSB]usb_phy_recover 642: usb recovery success
[ 9.892577] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_enable 328: <2,2,2,1>
[ 9.892593] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_connect 488: first_connect to 1
[ 9.892602] (2)[179:bat_thread_kthr][name:usb20&][MUSB]mt_usb_connect 491: [MUSB] USB connect
[ 9.892611] (2)[179:bat_thread_kthr][name:battery_common&][BAT_thread]Cable in, CHR_Type_num=1
[ 9.945963] (0)[311:mtk_agpsd][name:ccci&][md1]port ttyC2 open with flag 20802 by mtk_agpsd
[ 9.952042] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 FM cust config
[ 9.952061] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 rssi_l: -296
[ 9.952069] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 rssi_s: -296
[ 9.952077] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 pamd_th: -12
[ 9.952085] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 mr_th: -67
[ 9.952093] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 atdc_th: 3496
[ 9.952100] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 prx_th: 64
[ 9.952108] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 atdev_th: 0
[ 9.952116] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]MT6627 smg_th: 16421
[ 9.952124] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]de_emphasis: 0
[ 9.952131] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]osc_freq: 0
[ 9.952140] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]aud path[1]I2S state[1]mode[0]rate[0]
[ 9.952156] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]alloc fm:228:0
[ 9.952389] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]create_proc_entry success
[ 9.952473] (3)[239:wmt_loader][name:mtk_fm_drv&][FM_NTC | MAIN]6. fm platform driver registered
[ 9.952483] (3)[239:wmt_loader][name:fm_drv_init&][FM-MOD-INIT][I]do_fm_drv_init:finish fm module init
[ 9.952494] (3)[239:wmt_loader][name:wlan_drv_init&][WLAN-MOD-INIT][I]do_wlan_drv_init:start to do wlan module init 0x6735
[ 9.952607] (3)[239:wmt_loader][MTK-WIFI] WIFI_init: mtk_wmt_WIFI_chrdev driver(major 153) installed.
[ 9.952617] (3)[239:wmt_loader][name:wlan_drv_init&][WLAN-MOD-INIT][I]do_wlan_drv_init:WMT-WIFI char dev init, ret:0
[ 9.953871] (3)[239:wmt_loader][name:wlan_drv_init&][WLAN-MOD-INIT][I]do_wlan_drv_init:WLAN-GEN2 driver init, ret:0
[ 9.953886] (3)[239:wmt_loader][name:wlan_drv_init&][WLAN-MOD-INIT][I]do_wlan_drv_init:finish wlan module init
[ 9.954040] (3)[239:wmt_loader][name:wmt_detect&][WMT-DETECT][I]wmt_detect_close:close major 154 minor 0 (pid 239)
[ 10.033333] (1)[179:bat_thread_kthr][name:battery_common&]AvgVbat=(3588,3588),AvgI=(435,0),VChr=5184,AvgT=(30,30),SOC=(6,6),UI_SOC=6,ZCV=3493 bcct:1:0 I:80000
[ 10.033460] (1)[179:bat_thread_kthr][name:battery_common&][BATTERY] support JEITA, temperature=30
[ 10.033468] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Battery Normal Temperature between 10 and 45 !!
[ 10.033468]
[ 10.033506] (1)[179:bat_thread_kthr][name:charging_hw_pmic&][charging_set_cv_voltage] [0xf54]=0x1, [0xf4e]=0xd6
[ 10.033515] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Pre-CC mode charge, timer=0 on 0 !!
[ 10.033515]
[ 10.033526] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Default CC mode charging : 45000
[ 10.033718] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Default CC mode charging : 45000
[ 10.033738] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] pchr_turn_on_charging(), enable =1
[ 10.034028] (1)[179:bat_thread_kthr][name:battery_common&]UI_SOC=(6), resetBatteryMeter=(0)
[ 10.034080] -(1)[179:bat_thread_kthr][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 10.034266] (1)[179:bat_thread_kthr][name:battery_common&][BATTERY] Charger plug in/out, Call battery_meter_reset. (6)
[ 10.034290] (1)[179:bat_thread_kthr][name:battery_common&][BAT_thread]Cable in, CHR_Type_num=1
[ 10.047692] -(0)[406:ip6tables][name:musb_hdrc&][MUSB]musb_stage0_irq 1099: MUSB_INTR_RESET (b_idle)
[ 10.047712] -(0)[406:ip6tables][name:musb_qmu&]QMU_WARN,<musb_disable_q_all 55>, disable_q_all
[ 10.047734] -(0)[406:ip6tables][name:usb20&][MUSB]musb_sync_with_bat 640: BATTERY_SetUSBState, state=1
[ 10.047743] -(0)[406:ip6tables][name:linear_charging&][BATTERY] BAT_SetUSBState Success! Set 1
[ 10.047750] -(0)[406:ip6tables][name:battery_common&][BATTERY] wake_up_bat.
[ 10.051684] (3)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 950mv, freq = 598000 KHz
[ 10.052072] (3)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 10.116014] -(1)[412:ip6tables][name:g_android&][g_android][USB][ratelimit]android_setup,
[ 10.116041] -(1)[412:ip6tables]android_usb gadget: composite_setup bRequest=0x6
[ 10.116052] -(1)[412:ip6tables]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_DEVICE, value=18
[ 10.116107] (1)[60:kworker/1:1][name:usb20&][MUSB]usb_cable_connected 592: type(1)
[ 10.116117] (1)[60:kworker/1:1][name:g_android&][g_android][USB]android_work: is_hwconnected=1
[ 10.116173] (1)[60:kworker/1:1][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=CONNECTED
[ 10.116196] (1)[60:kworker/1:1][name:g_android&][g_android][USB]android_work: did not send zero uevent
[ 10.116346] -(2)[412:ip6tables][name:g_android&][g_android][USB][ratelimit]android_setup,
[ 10.116359] -(2)[412:ip6tables]android_usb gadget: composite_setup bRequest=0x6
[ 10.116373] -(2)[412:ip6tables]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=2
[ 10.116703] -(0)[238:boot_logo_updat][name:g_android&][g_android][USB][ratelimit]android_setup,
[ 10.116716] -(0)[238:boot_logo_updat]android_usb gadget: composite_setup bRequest=0x6
[ 10.116726] -(0)[238:boot_logo_updat]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=12
[ 10.117075] -(0)[238:boot_logo_updat][name:g_android&][g_android][USB][ratelimit]android_setup,
[ 10.117087] -(0)[238:boot_logo_updat]android_usb gadget: composite_setup bRequest=0x6
[ 10.117096] -(0)[238:boot_logo_updat]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=2
[ 10.117335] -(2)[412:ip6tables][name:g_android&][g_android][USB][ratelimit]android_setup,
[ 10.117345] -(2)[412:ip6tables]android_usb gadget: composite_setup bRequest=0x6
[ 10.117354] -(2)[412:ip6tables]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=8
[ 10.117719] -(1)[179:bat_thread_kthr]android_usb gadget: composite_setup bRequest=0x6
[ 10.117732] -(1)[179:bat_thread_kthr]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=2
[ 10.117918] -(0)[253:drmserver]android_usb gadget: composite_setup bRequest=0x6
[ 10.117928] -(0)[253:drmserver]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=34
[ 10.120770] -(0)[253:drmserver]android_usb gadget: composite_setup bRequest=0x6
[ 10.120802] -(0)[253:drmserver]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_CONFIG, value=9
[ 10.120968] -(0)[253:drmserver]android_usb gadget: composite_setup bRequest=0x6
[ 10.120978] -(0)[253:drmserver]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_CONFIG, value=62
[ 10.151508] (0)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1093mv, freq = 1170000 KHz
[ 10.165517] (1)[238:boot_logo_updat][name:mtkfb&][DISP]mtkfb_open
[ 10.169989] (2)[179:bat_thread_kthr][name:battery_common&]AvgVbat=(3588,3601),AvgI=(435,464),VChr=5014,AvgT=(29,29),SOC=(6,6),UI_SOC=6,ZCV=3493 bcct:1:0 I:45000
[ 10.170123] (2)[179:bat_thread_kthr][name:battery_common&][BATTERY] support JEITA, temperature=29
[ 10.170132] (2)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Battery Normal Temperature between 10 and 45 !!
[ 10.170132]
[ 10.170171] (2)[179:bat_thread_kthr][name:charging_hw_pmic&][charging_set_cv_voltage] [0xf54]=0x7, [0xf4e]=0xd6
[ 10.170181] (2)[179:bat_thread_kthr][name:linear_charging&][BATTERY] CC mode charge, timer=0 on 10 !!
[ 10.170181]
[ 10.170377] (2)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Default CC mode charging : 45000
[ 10.170400] (2)[179:bat_thread_kthr][name:linear_charging&][BATTERY] pchr_turn_on_charging(), enable =1
[ 10.170572] (2)[179:bat_thread_kthr][name:battery_common&]UI_SOC=(6), resetBatteryMeter=(0)
[ 10.170590] -(2)[179:bat_thread_kthr][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 10.170704] (2)[179:bat_thread_kthr][name:battery_common&][BATTERY] Charger plug in/out, Call battery_meter_reset. (6)
[ 10.170724] (2)[179:bat_thread_kthr][name:battery_common&][BAT_thread]Cable in, CHR_Type_num=1
[ 10.188026] -(3)[282:applypatch]android_usb gadget: composite_setup bRequest=0x9
[ 10.188052] -(3)[282:applypatch]android_usb gadget: high-speed config #1: android
[ 10.188063] -(3)[282:applypatch]mtp_function_set_alt intf: 0 alt: 0
[ 10.188080] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1633: musb type=BULK
[ 10.188090] -(3)[282:applypatch][name:usb20&][MUSB]is_saving_mode 843: 0
[ 10.188099] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1665: EP1 supports DBBUF
[ 10.188110] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1677: fifo size is 22 after 512, fifo address is 512, epnum 1,hwepnum 1
[ 10.188122] -(3)[282:applypatch][name:mtk_qmu&]QMU_WARN,<mtk_qmu_enable 400>, enable TQ(1)
[ 10.188142] -(3)[282:applypatch][name:musb_hdrc&][MUSB]musb_gadget_enable 1881: musb-hdrc periph: enabled ep1in for bulk IN, maxpacket 512
[ 10.188173] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1633: musb type=BULK
[ 10.188181] -(3)[282:applypatch][name:usb20&][MUSB]is_saving_mode 843: 0
[ 10.188190] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1665: EP1 supports DBBUF
[ 10.188201] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1677: fifo size is 22 after 512, fifo address is 1536, epnum 1,hwepnum 1
[ 10.188211] -(3)[282:applypatch][name:mtk_qmu&]QMU_WARN,<mtk_qmu_enable 334>, enable RQ(1)
[ 10.188229] -(3)[282:applypatch][name:musb_hdrc&][MUSB]musb_gadget_enable 1881: musb-hdrc periph: enabled ep1out for bulk OUT, maxpacket 512
[ 10.188241] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1633: musb type=INT
[ 10.188252] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1677: fifo size is 6 after 512, fifo address is 2560, epnum 2,hwepnum 2
[ 10.188262] -(3)[282:applypatch][name:mtk_qmu&]QMU_WARN,<mtk_qmu_enable 400>, enable TQ(2)
[ 10.188280] -(3)[282:applypatch][name:musb_hdrc&][MUSB]musb_gadget_enable 1881: musb-hdrc periph: enabled ep2in for int IN, maxpacket 28
[ 10.188293] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1633: musb type=BULK
[ 10.188301] -(3)[282:applypatch][name:usb20&][MUSB]is_saving_mode 843: 0
[ 10.188310] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1665: EP2 supports DBBUF
[ 10.188320] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1677: fifo size is 22 after 512, fifo address is 3072, epnum 2,hwepnum 2
[ 10.188330] -(3)[282:applypatch][name:mtk_qmu&]QMU_WARN,<mtk_qmu_enable 334>, enable RQ(2)
[ 10.188347] -(3)[282:applypatch][name:musb_hdrc&][MUSB]musb_gadget_enable 1881: musb-hdrc periph: enabled ep2out for bulk OUT, maxpacket 512
[ 10.188368] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1633: musb type=BULK
[ 10.188377] -(3)[282:applypatch][name:usb20&][MUSB]is_saving_mode 843: 0
[ 10.188386] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1665: EP3 supports DBBUF
[ 10.188396] -(3)[282:applypatch][name:musb_hdrc&][MUSB]fifo_setup 1677: fifo size is 22 after 512, fifo address is 4096, epnum 3,hwepnum 3
[ 10.188406] -(3)[282:applypatch][name:mtk_qmu&]QMU_WARN,<mtk_qmu_enable 400>, enable TQ(3)
[ 10.188423] -(3)[282:applypatch][name:musb_hdrc&][MUSB]musb_gadget_enable 1881: musb-hdrc periph: enabled ep3in for bulk IN, maxpacket 512
[ 10.188436] -(3)[282:applypatch]android_usb gadget: [COM]USB_REQ_SET_CONFIGURATION: value=0
[ 10.188455] -(3)[282:applypatch][name:usb20&][MUSB]musb_sync_with_bat 640: BATTERY_SetUSBState, state=2
[ 10.188464] -(3)[282:applypatch][name:linear_charging&][BATTERY] BAT_SetUSBState Success! Set 2
[ 10.188474] -(3)[282:applypatch][name:battery_common&][BATTERY] wake_up_bat.
[ 10.188506] (3)[21:kworker/3:0][name:usb20&][MUSB]usb_cable_connected 592: type(1)
[ 10.188516] (3)[21:kworker/3:0][name:g_android&][g_android][USB]android_work: is_hwconnected=1
[ 10.188585] (3)[21:kworker/3:0][name:g_android&][g_android][USB]android_work: sent uevent USB_STATE=CONFIGURED
[ 10.188595] (3)[21:kworker/3:0][name:g_android&][g_android][USB]android_work: did not send zero uevent
[ 10.188824] -(1)[261:pq]android_usb gadget: composite_setup bRequest=0x6
[ 10.188841] -(1)[261:pq]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=2
[ 10.189012] -(3)[237:surfaceflinger]android_usb gadget: composite_setup bRequest=0x6
[ 10.189023] -(3)[237:surfaceflinger]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=12
[ 10.189290] -(2)[262:aal]android_usb gadget: composite_setup bRequest=0x6
[ 10.189302] -(2)[262:aal]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=2
[ 10.189536] -(1)[261:pq]android_usb gadget: composite_setup bRequest=0x6
[ 10.189547] -(1)[261:pq]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=28
[ 10.191512] (2)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1168mv, freq = 1300000 KHz
[ 10.199621] -(1)[238:boot_logo_updat]android_usb gadget: composite_setup bRequest=0x6
[ 10.199644] -(1)[238:boot_logo_updat]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=4
[ 10.341251] (3)[179:bat_thread_kthr][name:battery_common&]AvgVbat=(3590,3656),AvgI=(435,446),VChr=5014,AvgT=(29,30),SOC=(6,6),UI_SOC=6,ZCV=3493 bcct:1:0 I:45000
[ 10.341381] (3)[179:bat_thread_kthr][name:battery_common&][BATTERY] support JEITA, temperature=29
[ 10.341392] (3)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Battery Normal Temperature between 10 and 45 !!
[ 10.341392]
[ 10.341431] (3)[179:bat_thread_kthr][name:charging_hw_pmic&][charging_set_cv_voltage] [0xf54]=0x7, [0xf4e]=0xd6
[ 10.341442] (3)[179:bat_thread_kthr][name:linear_charging&][BATTERY] CC mode charge, timer=10 on 20 !!
[ 10.341442]
[ 10.341632] (3)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Default CC mode charging : 45000
[ 10.341659] (3)[179:bat_thread_kthr][name:linear_charging&][BATTERY] pchr_turn_on_charging(), enable =1
[ 10.341815] (3)[179:bat_thread_kthr][name:battery_common&]UI_SOC=(6), resetBatteryMeter=(0)
[ 10.341832] -(3)[179:bat_thread_kthr][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 10.341940] (3)[179:bat_thread_kthr][name:battery_common&][BATTERY] Charger plug in/out, Call battery_meter_reset. (6)
[ 10.341960] (3)[179:bat_thread_kthr][name:battery_common&][BAT_thread]Cable in, CHR_Type_num=1
[ 10.375028] (2)[1:init]init: Service 'bootlogoupdater' (pid 238) exited with status 0
[ 10.375190] (2)[1:init]init: Service 'wmtLoader' (pid 239) exited with status 0
[ 10.375365] (2)[1:init]init: Service 'enableswap' (pid 250) exited with status 0
[ 10.375678] (2)[1:init]init: Service 'thermal_manager' (pid 271) exited with status 0
[ 10.398909] -(2)[254:mediaserver][name:mt_ptp&][PTP] ptp_set_ptp_volt cur_temp = 42800
[ 10.473475] (1)[179:bat_thread_kthr][name:battery_common&]AvgVbat=(3592,3630),AvgI=(436,482),VChr=5014,AvgT=(29,30),SOC=(6,6),UI_SOC=6,ZCV=3493 bcct:1:0 I:45000
[ 10.473610] (1)[179:bat_thread_kthr][name:battery_common&][BATTERY] support JEITA, temperature=29
[ 10.473619] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Battery Normal Temperature between 10 and 45 !!
[ 10.473619]
[ 10.473656] (1)[179:bat_thread_kthr][name:charging_hw_pmic&][charging_set_cv_voltage] [0xf54]=0x7, [0xf4e]=0xd6
[ 10.473667] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] CC mode charge, timer=20 on 30 !!
[ 10.473667]
[ 10.473861] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] Default CC mode charging : 45000
[ 10.473882] (1)[179:bat_thread_kthr][name:linear_charging&][BATTERY] pchr_turn_on_charging(), enable =1
[ 10.474047] (1)[179:bat_thread_kthr][name:battery_common&]UI_SOC=(6), resetBatteryMeter=(0)
[ 10.474064] -(1)[179:bat_thread_kthr][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
[ 10.474727] (3)[234:healthd]healthd: Unknown battery status '3'
[ 10.475109] (3)[234:healthd]healthd: battery l=6 v=3592 t=29.0 h=2 st=2 chg=u
[ 10.475172] (3)[234:healthd]healthd: send_already = 0
[ 10.475496] (3)[234:healthd]healthd: Unknown battery status '3'
[ 10.475820] (3)[234:healthd]healthd: battery l=6 v=3592 t=29.0 h=2 st=2 chg=u
[ 10.475880] (3)[234:healthd]healthd: send_already = 0
[ 10.476224] (3)[234:healthd]healthd: Unknown battery status '3'
[ 10.476558] (3)[234:healthd]healthd: battery l=6 v=3592 t=29.0 h=2 st=2 chg=u
[ 10.476615] (3)[234:healthd]healthd: send_already = 0
[ 10.476941] (3)[234:healthd]healthd: Unknown battery status '3'
[ 10.477242] (3)[234:healthd]healthd: battery l=6 v=3592 t=29.0 h=2 st=2 chg=u
[ 10.477298] (3)[234:healthd]healthd: send_already = 0
[ 10.590971] (1)[242:ccci_mdinit][name:ccci&][md1]port ccci_monitor open with flag 20002 by ccci_mdinit
[ 10.600251] -(0)[282:applypatch][name:mt_ptp&][PTP] ptp_set_ptp_volt cur_temp = 42800
[ 10.608388] (1)[242:ccci_mdinit][name:ccci&][md1]CCCI_IOC_GET_MD_SBP_CFG: get config sbp code fail! ret:-22, Config val:
[ 10.610323] (1)[242:ccci_mdinit][name:ccci&][md1]CCCI_IOC_SIM_SWITCH_TYPE:sim type(0x0)
[ 10.610350] (1)[242:ccci_mdinit][name:ccci&][md1]CCCI_IOC_UPDATE_SIM_SLOT_CFG get s0:0 s1:1 s2:0 s3:0
[ 10.610445] (1)[242:ccci_mdinit][name:ccci&][md1]port ccci_ipc_5 open with flag 20002 by ccci_mdinit
[ 10.611334] (1)[242:ccci_mdinit][name:ccci&][md1]CCCI_IPC_UPDATE_TIMEZONE keep 0x0
[ 10.623509] (1)[242:ccci_mdinit][name:ccci&][md1]ccci core boot md1, md_state=1
[ 10.623526] (1)[242:ccci_mdinit][name:ccci&][md1/ntc]CLDMA modem is starting
[ 10.623536] (1)[242:ccci_mdinit][name:ccci&][md1]Clear MPU protect MD ROM region<5>
[ 10.623550] (1)[242:ccci_mdinit][name:ccci&][md1]Clear MPU protect MD R/W region<14>
[ 10.623565] (1)[242:ccci_mdinit][name:ccci&][md1]Clear MPU protect DSP ROM region<6>
[ 10.624266] (1)[242:ccci_mdinit][name:ccci_util_lib&][ccci0/util]This image does not find header, no need bypass
[ 10.624280] (1)[242:ccci_mdinit][name:ccci_util_lib&][ccci0/util]legacy load
[ 10.668752] (0)[240:6620_launcher][name:osal&][WMT-DEV][W]WMT_unlocked_ioctl:chipid = 0x321
[ 10.724211] (0)[240:6620_launcher][name:osal&][WMT-LIB][W]wmt_lib_set_hif:new hifType: 2, fm:2
[ 10.724684] (0)[249:mtk_wmtd][name:osal&][WMT-CORE][E]opfunc_hif_conf(841):WMT-CORE: WMT HIF info added
[ 10.724791] (0)[240:6620_launcher][name:osal&][WMT-DEV][W]WMT_unlocked_ioctl:unknown cmd (-2147180516)
[ 10.726976] (0)[249:mtk_wmtd][name:mtk_wcn_consys_hw&][WMT-CONSYS-HW][W]mtk_wcn_consys_hw_reg_ctrl:CONSYS-HW-REG-CTRL(0x00000001),start
[ 10.727017] (0)[249:mtk_wmtd][name:core&]vcn18: operation not allowed
[ 10.727558] (0)[249:mtk_wmtd][name:core&]vcn28: operation not allowed
[ 10.728074] (0)[249:mtk_wmtd][name:mtk_wcn_consys_hw&][WMT-CONSYS-HW][E]mtk_wcn_consys_hw_reg_ctrl(463):Read CONSYS chipId(0x00000000)
[ 10.781293] (0)[249:mtk_wmtd][name:mtk_wcn_consys_hw&][WMT-CONSYS-HW][W]mtk_wcn_consys_hw_reg_ctrl:CONSYS-HW-REG-CTRL(0x00000001),finish
[ 10.782118] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF-EXP[I]mtk_wcn_btif_open:p_btif(0xc0febf40)
[ 10.782144] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF-EXP[I]mtk_wcn_btif_open:owner name:CONSYS_STP, recorded name:CONSYS_STP
[ 10.782176] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_lpbk_ctrl:loopback function disabled
[ 10.782210] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_controller_setup:succeed
[ 10.782241] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_tx_dma_setup:succeed
[ 10.782272] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]_btif_rx_dma_setup:succeed
[ 10.782286] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]btif_log_buf_reset:reset Tx log buffer
[ 10.782295] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]btif_log_buf_reset:reset Rx log buffer
[ 10.782307] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF[I]btif_open:BTIF's Tx Mode:1, Rx Mode(1)
[ 10.782316] (0)[249:mtk_wmtd][name:btif&]MTK-BTIF-EXP[I]mtk_wcn_btif_open:btif_open succeed
[ 10.783138] (0)[249:mtk_wmtd][name:osal&][WMT-CORE][W]wmt_core_hw_check:get hwcode (chip id) (0x321)
[ 10.784836] (0)[249:mtk_wmtd][name:osal&][WMT-IC][W]mtk_wcn_soc_ver_check:0x321: ic info: SOC_CONSYS.E1 (0x8a00/0x8a00, WMTHWVER:0, patch_ext:_e1)
[ 10.791875] -(2)[440:AALServiceMain]android_usb gadget: composite_setup bRequest=0x6
[ 10.791900] -(2)[440:AALServiceMain]android_usb gadget: [COM]USB_REQ_GET_DESCRIPTOR: USB_DT_STRING, value=4
[ 10.793380] -(2)[440:AALServiceMain][name:musb_hdrc&][MUSB]service_zero_data_request 332: restarting the request
[ 10.793396] -(2)[440:AALServiceMain][name:musb_hdrc&]QMU_WARN,<musb_ep_restart 2002>, <== RX/OUT request d98b7980 len 512 on hw_ep2
[ 10.810789] (0)[249:mtk_wmtd][name:osal&][WMT-IC][W]mtk_wcn_soc_patch_dwn:[Consys Patch] Built Time = 20160323104251a
[ 10.810810] (0)[249:mtk_wmtd][name:osal&][WMT-IC][W]mtk_wcn_soc_patch_dwn:[Consys Patch] Platform = 1549
[ 10.821270] (1)[242:ccci_mdinit][name:ccci_util_lib&][ccci0/util]This image does not find header, no need bypass
[ 10.821289] (1)[242:ccci_mdinit][name:ccci_util_lib&][ccci0/util]legacy load
[ 10.841927] (1)[242:ccci_mdinit][name:ccci&][md1/err]load ARMV7 firmware begin[0x0]<0x0>
[ 10.842674] (1)[242:ccci_mdinit][name:ccci&][md1]MPU Start protect MD ROM region<5:5c000000:5c92ffff> b6d0b64, invalid_map=0x20000000
[ 10.842695] (1)[242:ccci_mdinit][name:ccci&][md1]MPU Start protect MD R/W region<14:5c930000:5f7fffff> b6d0b45
[ 10.842710] (1)[242:ccci_mdinit][name:ccci&][md1]MPU Start protect MD Share region<9:5f800000:5f80ffff> b6d0b40
[ 10.842723] (1)[242:ccci_mdinit][name:ccci&][md1]MPU Start protect AP region<15:40000000:7fffffff> 20
[ 10.842739] (1)[242:ccci_mdinit][name:ccci&][md1]MPU Start protect DSP region<6:5ca20000:5cb7ffff> b6d0b64
[ 10.842781] (1)[242:ccci_mdinit][name:ccci&][md1]md_cd_power_on:mt_set_gpio_out(GPIO_LTE_VSRAM_EXT_POWER_EN_PIN,1)
[ 10.842789] (1)[242:ccci_mdinit][name:ccci&][md1]md_cd_power_on:set VLTE on,bit0,1
[ 10.843012] (1)[242:ccci_mdinit][name:ccci&][md1]md_cd_power_on: set md1_srcclkena bit(0x1000_0338)=0x54
[ 10.843021] (1)[242:ccci_mdinit][name:ccci&][md1]clock buffer, BSI ignore mode
[ 10.843046] (1)[242:ccci_mdinit][name:ccci&][md1]Call start clk_prepare_enable()
[ 10.843076] (1)[242:ccci_mdinit][name:ccci&][md1]Call end clk_prepare_enable()ret=0
[ 10.843086] (1)[242:ccci_mdinit][name:ccci&][md1]Call end kicker_pbm_by_md(0,true)
[ 10.843099] (1)[242:ccci_mdinit][name:ccci&][md1]set MD boot slave
[ 10.843111] (1)[242:ccci_mdinit][name:ccci&][md1]CLDMA AP side clock is always on
[ 10.843132] (1)[242:ccci_mdinit][name:ccci&][md1]cldma_reset from boot_md_store
[ 10.843161] (1)[242:ccci_mdinit][name:ccci&][md1]cldma_start from boot_md_store
[ 10.843190] (1)[242:ccci_mdinit][name:ccci&][md1/ntc]CLDMA modem started 0
[ 10.890000] (0)[249:mtk_wmtd][name:osal&][WMT-IC][W]mtk_wcn_soc_patch_dwn:wmt_core: patch dwn:0 frag(50, 932) ok
[ 10.906212] (2)[440:AALServiceMain][name:ddp_pwm&][PWM] disp_pwm_set_backlight_cmdq(id = 0x1, level_1024 = 1023), old = -1
[ 10.911112] (0)[143:ccci_ctrl][name:ccci&][md1]control message 0x0,0x5555FFFF
[ 10.911133] (0)[143:ccci_ctrl][name:ccci&][md1]get old handshake message
[ 10.911749] (1)[242:ccci_mdinit][name:ccci&][md1]MPU Start protect AP region<15:40000000:7fffffff> a280b68
[ 10.911813] -(1)[242:ccci_mdinit][name:mtk_rtc_hal_common&]mtk_rtc_hal_common: rtc_spare_reg[12] = {16432, 1, 6}
[ 10.911850] (1)[242:ccci_mdinit][name:ccci&][md1]**********************************************
[ 10.911859] (1)[242:ccci_mdinit][name:ccci&][md1]Prefix CCIF
[ 10.911868] (1)[242:ccci_mdinit][name:ccci&][md1]Platform_L MT67
[ 10.911876] (1)[242:ccci_mdinit][name:ccci&][md1]Platform_H 35E1
[ 10.911885] (1)[242:ccci_mdinit][name:ccci&][md1]DriverVersion 0x20110118
[ 10.911893] (1)[242:ccci_mdinit][name:ccci&][md1]BootChannel 0
[ 10.911902] (1)[242:ccci_mdinit][name:ccci&][md1]BootingStartID(Mode) 0x0
[ 10.911910] (1)[242:ccci_mdinit][name:ccci&][md1]BootAttributes 0
[ 10.911918] (1)[242:ccci_mdinit][name:ccci&][md1]BootReadyID 0
[ 10.911926] (1)[242:ccci_mdinit][name:ccci&][md1]ExceShareMemBase 0x41800000
[ 10.911935] (1)[242:ccci_mdinit][name:ccci&][md1]ExceShareMemSize 0x10000
[ 10.911943] (1)[242:ccci_mdinit][name:ccci&][md1]TotalShareMemBase 0x41800000
[ 10.911952] (1)[242:ccci_mdinit][name:ccci&][md1]TotalShareMemSize 0x10000
[ 10.911960] (1)[242:ccci_mdinit][name:ccci&][md1]CheckSum 0
[ 10.911968] (1)[242:ccci_mdinit][name:ccci&][md1]Postfix CCIF
[ 10.911976] (1)[242:ccci_mdinit][name:ccci&][md1]**********************************************
[ 10.911983] (1)[242:ccci_mdinit][name:ccci&][md1]Prefix MISC
[ 10.911991] (1)[242:ccci_mdinit][name:ccci&][md1]SupportMask 0xaa24
[ 10.912000] (1)[242:ccci_mdinit][name:ccci&][md1]Index 0x0
[ 10.912007] (1)[242:ccci_mdinit][name:ccci&][md1]Next 0x0
[ 10.912017] (1)[242:ccci_mdinit][name:ccci&][md1]Feature0 0x0 0x0 0x0 0x0
[ 10.912025] (1)[242:ccci_mdinit][name:ccci&][md1]Feature1 0x0 0x0 0x0 0x0
[ 10.912035] (1)[242:ccci_mdinit][name:ccci&][md1]Feature2 0x53fcf385 0x0 0x0 0x0
[ 10.912044] (1)[242:ccci_mdinit][name:ccci&][md1]Feature3 0x0 0x0 0x0 0x0
[ 10.912053] (1)[242:ccci_mdinit][name:ccci&][md1]Feature4 0x0 0x0 0x0 0x0
[ 10.912062] (1)[242:ccci_mdinit][name:ccci&][md1]Feature5 0x3 0x0 0x0 0x0
[ 10.912071] (1)[242:ccci_mdinit][name:ccci&][md1]Feature6 0x59c58a59 0xad133 0x0 0x0
[ 10.912080] (1)[242:ccci_mdinit][name:ccci&][md1]Feature7 0x0 0x0 0x0 0x0
[ 10.912088] (1)[242:ccci_mdinit][name:ccci&][md1]Postfix MISC
[ 10.912096] (1)[242:ccci_mdinit][name:ccci&][md1]----------------------------------------------
[ 10.921267] (1)[279:app_process][name:ccci&][md1]traffic(2/0):Tx(7f)1-0,0-0,0-0,0-0,0-0,0-0,0-0,0-0:Rx(7f)1,0,0,0,0,0,0,0
[ 10.921291] (1)[279:app_process][name:ccci&][md1]traffic(net): tx: [22]0 0, [26]0 0, [30]0 0, rx:[20]0, [24]0, [28]0
[ 10.939416] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:6, ret:-11
[ 10.939509] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:5, ret:-11
[ 10.939585] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM2_HOT_PLUG_EINT, len:23, type:6, ret:-11
[ 10.939657] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM2_HOT_PLUG_EINT, len:23, type:5, ret:-11
[ 10.939729] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM3_HOT_PLUG_EINT, len:23, type:6, ret:-11
[ 10.939798] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM3_HOT_PLUG_EINT, len:23, type:5, ret:-11
[ 10.939872] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM4_HOT_PLUG_EINT, len:23, type:6, ret:-11
[ 10.939940] (0)[140:ccci_rpc_k][name:ccci&][md1][0x00004005] fail: name:MD1_SIM4_HOT_PLUG_EINT, len:23, type:5, ret:-11
[ 10.955726] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 10.964187] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 10.974409] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 10.983782] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 10.994027] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.003827] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.010122] (3)[237:surfaceflinger][name:m4u_hw&]M4Uconfig_port:DISP_OVL0,v1,s0
[ 11.013952] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.024901] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.033990] (2)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.043648] (3)[237:surfaceflinger][name:bootprof&]BOOTPROF: 11043.635871:BOOT_Animation:START
[ 11.044049] (2)[1:init]init: Starting service 'bootanim'...
[ 11.044392] (3)[237:surfaceflinger][name:mtkfb&][DISP]mtkfb_open
[ 11.046244] (3)[241:ccci_fsd][name:aed&]AEE_MONITOR_SET[status]: 0x1
[ 11.046247] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.059131] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.062134] (0)[249:mtk_wmtd][name:osal&][WMT-IC][W]mtk_wcn_soc_patch_dwn:wmt_core: patch dwn:0 frag(121, 284) ok
[ 11.063870] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.073762] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.083991] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.086479] (0)[249:mtk_wmtd][name:core&]vcn33_bt: unsupportable voltage range: 3300000-3300uV
[ 11.086937] (0)[249:mtk_wmtd][name:core&]vcn33_wifi: unsupportable voltage range: 3300000-3300uV
[ 11.091322] (3)[237:surfaceflinger][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_lcm_status_switch: LCM is on
[ 11.091747] (3)[237:surfaceflinger][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 950mv, freq = 819000 KHz
[ 11.091787] (3)[237:surfaceflinger][name:fliper&]
[ 11.091787] <<SOC DVFS FLIPER>> Late Resume
[ 11.091793] (3)[237:surfaceflinger][name:fliper&]fliper enable +++
[ 11.091807] (3)[237:surfaceflinger][name:osal&][WMT-DEV][W]wmt_fb_notifier_callback:@@@@@@@@@@wmt enter UNBLANK @@@@@@@@@@@@@@
[ 11.092074] (3)[21:kworker/3:0][name:wmt_plat_alps&][WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(2)
[ 11.096382] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.104632] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.111727] (0)[58:cfinteractive][name:mt_cpufreq&][Power/cpufreq] @_mt_cpufreq_set_locked(): Vproc = 1175mv, freq = 1300000 KHz
[ 11.114394] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.123726] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.133933] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02
[ 11.143943] (3)[241:ccci_fsd][name:ccci&][md1]ch=15 qno=1 free slot 0, CLDMA_AP_L2TIMR0=0xff00ff02