blob: d8c0e0578c62a6563f16a757c32de6aacdc50665 [file]
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef _SAR_H_
#define _SAR_H_
#include <fw_config.h>
#include <stdint.h>
#define MAX_ANT_GAINS_REVISION 2
#define MAX_DENYLIST_ENTRY 16
#define MAX_DSAR_SET_COUNT 3
#define MAX_GEO_OFFSET_REVISION 3
#define MAX_PROFILE_COUNT 16
#define MAX_SAR_REVISION 2
#define MAX_BSAR_REVISION 2
#define WBEM_REVISION 0
#define BPAG_REVISION 2
#define BBFB_REVISION 1
#define BDCM_REVISION 1
#define BBSM_REVISION 1
#define BUCS_REVISION 1
#define BDMM_REVISION 1
#define EBRD_REVISION 1
#define WPFC_REVISION 0
#define DSBR_REVISION 1
#define REVISION_SIZE 1
#define SAR_REV0_CHAINS_COUNT 2
#define SAR_REV0_SUBBANDS_COUNT 5
#define SAR_FILE_REVISION 1
#define SAR_STR_PREFIX "$SAR"
#define SAR_STR_PREFIX_SIZE 4
struct geo_profile {
uint8_t revision;
uint8_t chains_count;
uint8_t bands_count;
uint8_t wgds_table[];
} __packed;
struct sar_profile {
uint8_t revision;
uint8_t dsar_set_count;
uint8_t chains_count;
uint8_t subbands_count;
uint8_t sar_table[];
} __packed;
struct gain_profile {
uint8_t revision;
uint8_t mode;
uint8_t chains_count;
uint8_t bands_count;
uint8_t ppag_table[];
} __packed;
struct avg_profile {
uint8_t revision;
uint8_t tas_selection;
uint8_t tas_list_size;
uint16_t deny_list_entry[MAX_DENYLIST_ENTRY];
} __packed;
struct dsm_profile {
uint32_t supported_functions;
uint32_t disable_active_sdr_channels;
uint32_t support_indonesia_5g_band;
uint32_t support_ultra_high_band;
uint32_t regulatory_configurations;
uint32_t uart_configurations;
uint32_t enablement_11ax;
uint32_t unii_4;
uint32_t enablement_11be;
uint32_t energy_detection_threshold;
uint32_t rfi_mitigation;
};
struct sar_power_table {
uint8_t restriction_for_2g4;
uint8_t restriction_for_5g2;
uint8_t restriction_for_5g8_5g9;
uint8_t restriction_for_6g1;
uint8_t restriction_for_6g3;
} __packed;
struct bsar_profile {
uint8_t revision;
uint8_t increased_power_mode_limitation;
union {
struct rev1 {
uint8_t sar_lb_power_restriction;
uint8_t br_modulation;
uint8_t edr2_modulation;
uint8_t edr3_modulation;
uint8_t le_modulation;
uint8_t le2_mhz_modulation;
uint8_t le_lr_modulation;
} rev1;
struct rev2 {
struct sar_power_table set_1_chain_a;
struct sar_power_table set_1_chain_b;
} rev2;
} revs;
} __packed;
struct wbem_profile {
uint8_t revision;
uint32_t bandwidth_320mhz_country_enablement;
} __packed;
struct bpag_profile {
uint8_t revision;
uint32_t antenna_gain_country_enablement;
} __packed;
struct bbfb_profile {
uint8_t revision;
uint8_t enable_quad_filter_bypass;
} __packed;
struct bdcm_profile {
uint8_t revision;
uint32_t dual_chain_mode;
} __packed;
struct bbsm_profile {
uint8_t revision;
uint32_t bands_selection;
} __packed;
struct bucs_profile {
uint8_t revision;
uint32_t uhb_country_selection;
} __packed;
struct bdmm_profile {
uint8_t revision;
uint8_t dual_mac_enable;
} __packed;
struct ebrd_profile {
uint8_t revision;
uint32_t dynamic_sar_enable;
uint32_t number_of_optional_sar;
struct {
struct sar_power_table chain_a;
struct sar_power_table chain_b;
} sar_table_sets[3];
} __packed;
struct wpfc_profile {
uint8_t revision;
uint8_t filter_cfg_chain_a;
uint8_t filter_cfg_chain_b;
uint8_t filter_cfg_chain_c;
uint8_t filter_cfg_chain_d;
} __packed;
struct dsbr_profile {
uint8_t revision;
uint32_t bri_resistor_value;
} __packed;
struct sar_header {
char marker[SAR_STR_PREFIX_SIZE];
uint8_t version;
uint16_t offsets[];
} __packed;
/* Wifi SAR limit table structure */
union wifi_sar_limits {
struct {
struct sar_profile *sar;
struct geo_profile *wgds;
struct gain_profile *ppag;
struct avg_profile *wtas;
struct dsm_profile *dsm;
struct bsar_profile *bsar;
struct wbem_profile *wbem;
struct bpag_profile *bpag;
struct bbfb_profile *bbfb;
struct bdcm_profile *bdcm;
struct bbsm_profile *bbsm;
struct bucs_profile *bucs;
struct bdmm_profile *bdmm;
struct ebrd_profile *ebrd;
struct wpfc_profile *wpfc;
struct dsbr_profile *dsbr;
};
void *profile[MAX_PROFILE_COUNT];
};
/*
* Retrieve the wifi ACPI configuration data from CBFS and decode it
* sar_limits: Pointer to wifi_sar_limits where the resulted data is stored
*
* Returns: 0 on success, -1 on errors (The .hex file doesn't exist, or the decode failed)
*/
int get_wifi_sar_limits(union wifi_sar_limits *sar_limits);
#define WIFI_SAR_CBFS_DEFAULT_FILENAME "wifi_sar_defaults.hex"
const char *get_wifi_sar_cbfs_filename(void);
char *get_wifi_sar_fw_config_filename(const struct fw_config_field *field);
#endif /* _SAR_H_ */