blob: de27b42588a3dc722472de934c95639ca7ffebdd [file] [log] [blame]
{
'targets': [
# Due to an unfortunate intersection of lameness between gcc and gyp,
# we have to build the *_SSE2.cpp files in a separate target. The
# gcc lameness is that, in order to compile SSE2 intrinsics code, it
# must be passed the -msse2 flag. However, with this flag, it may
# emit SSE2 instructions even for scalar code, such as the CPUID
# test used to test for the presence of SSE2. So that, and all other
# code must be compiled *without* -msse2. The gyp lameness is that it
# does not allow file-specific CFLAGS, so we must create this extra
# target for those files to be compiled with -msse2.
#
# This is actually only a problem on 32-bit Linux (all Intel Macs have
# SSE2, Linux x86_64 has SSE2 by definition, and MSC will happily emit
# SSE2 from instrinsics, while generating plain ol' 386 for everything
# else). However, to keep the .gyp file simple and avoid platform-specific
# build breakage, we do this on all platforms.
# For about the same reason, we need to compile the ARM opts files
# separately as well.
{
'target_name': 'opts',
'product_name': 'skia_opts',
'type': 'static_library',
'standalone_static_library': 1,
'include_dirs': [
'../include/config',
'../include/core',
'../src/core',
'../src/opts',
],
'conditions': [
[ 'skia_arch_type == "x86" and skia_os != "ios"', {
'conditions': [
[ 'skia_os in ["linux", "freebsd", "openbsd", "solaris", "nacl"]', {
'cflags': [
'-msse2',
],
}],
],
'sources': [
'../src/opts/opts_check_SSE2.cpp',
'../src/opts/SkBitmapProcState_opts_SSE2.cpp',
'../src/opts/SkBlitRow_opts_SSE2.cpp',
'../src/opts/SkBlitRect_opts_SSE2.cpp',
'../src/opts/SkUtils_opts_SSE2.cpp',
],
'dependencies': [
'opts_ssse3',
],
}],
[ 'skia_arch_type == "arm" and armv7 == 1', {
# The assembly uses the frame pointer register (r7 in Thumb/r11 in
# ARM), the compiler doesn't like that.
'cflags!': [
'-fno-omit-frame-pointer',
'-mapcs-frame',
'-mapcs',
],
'cflags': [
'-fomit-frame-pointer',
'-mno-apcs-frame',
],
'variables': {
'arm_neon_optional%': '<(arm_neon_optional>',
},
'sources': [
'../src/opts/opts_check_arm.cpp',
'../src/opts/memset.arm.S',
'../src/opts/SkBitmapProcState_opts_arm.cpp',
'../src/opts/SkBlitRow_opts_arm.cpp',
'../src/opts/SkBlitRow_opts_arm.h',
],
'conditions': [
[ 'arm_neon == 1 or arm_neon_optional == 1', {
'dependencies': [
'opts_neon',
]
}],
[ 'skia_os == "ios"', {
'sources!': [
# these fail to compile under xcode for ios
'../src/opts/memset.arm.S',
'../src/opts/SkBitmapProcState_opts_arm.cpp',
'../src/opts/SkBlitRow_opts_arm.cpp',
],
}],
],
}],
[ '(skia_arch_type == "arm" and armv7 == 0) or (skia_os == "ios")', {
'sources': [
'../src/opts/SkBitmapProcState_opts_none.cpp',
'../src/opts/SkBlitRow_opts_none.cpp',
'../src/opts/SkUtils_opts_none.cpp',
],
}],
],
},
# For the same lame reasons as what is done for skia_opts, we have to
# create another target specifically for SSSE3 code as we would not want
# to compile the SSE2 code with -mssse3 which would potentially allow
# gcc to generate SSSE3 code.
{
'target_name': 'opts_ssse3',
'product_name': 'skia_opts_ssse3',
'type': 'static_library',
'standalone_static_library': 1,
'include_dirs': [
'../include/config',
'../include/core',
'../src/core',
],
'conditions': [
[ 'skia_os in ["linux", "freebsd", "openbsd", "solaris", "nacl"]', {
'cflags': [
'-mssse3',
],
}],
# TODO(epoger): the following will enable SSSE3 on Macs, but it will
# break once we set OTHER_CFLAGS anywhere else (the first setting will
# be replaced, not added to)
[ 'skia_os in ["mac"]', {
'xcode_settings': {
'OTHER_CFLAGS': ['-mssse3',],
},
}],
[ 'skia_arch_type == "x86"', {
'sources': [
'../src/opts/SkBitmapProcState_opts_SSSE3.cpp',
],
}],
],
},
# NEON code must be compiled with -mfpu=neon which also affects scalar
# code. To support dynamic NEON code paths, we need to build all
# NEON-specific sources in a separate static library. The situation
# is very similar to the SSSE3 one.
{
'target_name': 'opts_neon',
'product_name': 'skia_opts_neon',
'type': 'static_library',
'standalone_static_library': 1,
'include_dirs': [
'../include/config',
'../include/core',
'../src/core',
'../src/opts',
],
'cflags!': [
'-fno-omit-frame-pointer',
'-mfpu=vfp', # remove them all, just in case.
'-mfpu=vfpv3',
'-mfpu=vfpv3-d16',
],
'cflags': [
'-mfpu=neon',
'-fomit-frame-pointer',
],
'sources': [
'../src/opts/memset16_neon.S',
'../src/opts/memset32_neon.S',
'../src/opts/SkBitmapProcState_arm_neon.cpp',
'../src/opts/SkBitmapProcState_matrixProcs_neon.cpp',
'../src/opts/SkBitmapProcState_matrix_clamp_neon.h',
'../src/opts/SkBitmapProcState_matrix_repeat_neon.h',
'../src/opts/SkBlitRow_opts_arm_neon.cpp',
],
},
],
}
# Local Variables:
# tab-width:2
# indent-tabs-mode:nil
# End:
# vim: set expandtab tabstop=2 shiftwidth=2: