| /************************************************************************** |
| * |
| * Copyright 2007 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| **************************************************************************/ |
| |
| /** |
| * \brief Primitive rasterization/rendering (points, lines, triangles) |
| * |
| * \author Keith Whitwell <keith@tungstengraphics.com> |
| * \author Brian Paul |
| */ |
| |
| #include "sp_context.h" |
| #include "sp_quad.h" |
| #include "sp_quad_pipe.h" |
| #include "sp_setup.h" |
| #include "sp_state.h" |
| #include "draw/draw_context.h" |
| #include "draw/draw_vertex.h" |
| #include "pipe/p_shader_tokens.h" |
| #include "util/u_math.h" |
| #include "util/u_memory.h" |
| |
| |
| #define DEBUG_VERTS 0 |
| #define DEBUG_FRAGS 0 |
| |
| |
| /** |
| * Triangle edge info |
| */ |
| struct edge { |
| float dx; /**< X(v1) - X(v0), used only during setup */ |
| float dy; /**< Y(v1) - Y(v0), used only during setup */ |
| float dxdy; /**< dx/dy */ |
| float sx, sy; /**< first sample point coord */ |
| int lines; /**< number of lines on this edge */ |
| }; |
| |
| |
| /** |
| * Max number of quads (2x2 pixel blocks) to process per batch. |
| * This can't be arbitrarily increased since we depend on some 32-bit |
| * bitmasks (two bits per quad). |
| */ |
| #define MAX_QUADS 16 |
| |
| |
| /** |
| * Triangle setup info. |
| * Also used for line drawing (taking some liberties). |
| */ |
| struct setup_context { |
| struct softpipe_context *softpipe; |
| |
| /* Vertices are just an array of floats making up each attribute in |
| * turn. Currently fixed at 4 floats, but should change in time. |
| * Codegen will help cope with this. |
| */ |
| const float (*vmax)[4]; |
| const float (*vmid)[4]; |
| const float (*vmin)[4]; |
| const float (*vprovoke)[4]; |
| |
| struct edge ebot; |
| struct edge etop; |
| struct edge emaj; |
| |
| float oneoverarea; |
| int facing; |
| |
| float pixel_offset; |
| |
| struct quad_header quad[MAX_QUADS]; |
| struct quad_header *quad_ptrs[MAX_QUADS]; |
| unsigned count; |
| |
| struct tgsi_interp_coef coef[PIPE_MAX_SHADER_INPUTS]; |
| struct tgsi_interp_coef posCoef; /* For Z, W */ |
| |
| struct { |
| int left[2]; /**< [0] = row0, [1] = row1 */ |
| int right[2]; |
| int y; |
| } span; |
| |
| #if DEBUG_FRAGS |
| uint numFragsEmitted; /**< per primitive */ |
| uint numFragsWritten; /**< per primitive */ |
| #endif |
| |
| unsigned cull_face; /* which faces cull */ |
| unsigned nr_vertex_attrs; |
| }; |
| |
| |
| |
| |
| |
| |
| |
| /** |
| * Clip setup->quad against the scissor/surface bounds. |
| */ |
| static INLINE void |
| quad_clip(struct setup_context *setup, struct quad_header *quad) |
| { |
| const struct pipe_scissor_state *cliprect = &setup->softpipe->cliprect; |
| const int minx = (int) cliprect->minx; |
| const int maxx = (int) cliprect->maxx; |
| const int miny = (int) cliprect->miny; |
| const int maxy = (int) cliprect->maxy; |
| |
| if (quad->input.x0 >= maxx || |
| quad->input.y0 >= maxy || |
| quad->input.x0 + 1 < minx || |
| quad->input.y0 + 1 < miny) { |
| /* totally clipped */ |
| quad->inout.mask = 0x0; |
| return; |
| } |
| if (quad->input.x0 < minx) |
| quad->inout.mask &= (MASK_BOTTOM_RIGHT | MASK_TOP_RIGHT); |
| if (quad->input.y0 < miny) |
| quad->inout.mask &= (MASK_BOTTOM_LEFT | MASK_BOTTOM_RIGHT); |
| if (quad->input.x0 == maxx - 1) |
| quad->inout.mask &= (MASK_BOTTOM_LEFT | MASK_TOP_LEFT); |
| if (quad->input.y0 == maxy - 1) |
| quad->inout.mask &= (MASK_TOP_LEFT | MASK_TOP_RIGHT); |
| } |
| |
| |
| /** |
| * Emit a quad (pass to next stage) with clipping. |
| */ |
| static INLINE void |
| clip_emit_quad(struct setup_context *setup, struct quad_header *quad) |
| { |
| quad_clip( setup, quad ); |
| |
| if (quad->inout.mask) { |
| struct softpipe_context *sp = setup->softpipe; |
| |
| #if DEBUG_FRAGS |
| setup->numFragsEmitted += util_bitcount(quad->inout.mask); |
| #endif |
| |
| sp->quad.first->run( sp->quad.first, &quad, 1 ); |
| } |
| } |
| |
| |
| |
| /** |
| * Given an X or Y coordinate, return the block/quad coordinate that it |
| * belongs to. |
| */ |
| static INLINE int |
| block(int x) |
| { |
| return x & ~(2-1); |
| } |
| |
| |
| static INLINE int |
| block_x(int x) |
| { |
| return x & ~(16-1); |
| } |
| |
| |
| /** |
| * Render a horizontal span of quads |
| */ |
| static void |
| flush_spans(struct setup_context *setup) |
| { |
| const int step = MAX_QUADS; |
| const int xleft0 = setup->span.left[0]; |
| const int xleft1 = setup->span.left[1]; |
| const int xright0 = setup->span.right[0]; |
| const int xright1 = setup->span.right[1]; |
| struct quad_stage *pipe = setup->softpipe->quad.first; |
| |
| const int minleft = block_x(MIN2(xleft0, xleft1)); |
| const int maxright = MAX2(xright0, xright1); |
| int x; |
| |
| /* process quads in horizontal chunks of 16 */ |
| for (x = minleft; x < maxright; x += step) { |
| unsigned skip_left0 = CLAMP(xleft0 - x, 0, step); |
| unsigned skip_left1 = CLAMP(xleft1 - x, 0, step); |
| unsigned skip_right0 = CLAMP(x + step - xright0, 0, step); |
| unsigned skip_right1 = CLAMP(x + step - xright1, 0, step); |
| unsigned lx = x; |
| unsigned q = 0; |
| |
| unsigned skipmask_left0 = (1U << skip_left0) - 1U; |
| unsigned skipmask_left1 = (1U << skip_left1) - 1U; |
| |
| /* These calculations fail when step == 32 and skip_right == 0. |
| */ |
| unsigned skipmask_right0 = ~0U << (unsigned)(step - skip_right0); |
| unsigned skipmask_right1 = ~0U << (unsigned)(step - skip_right1); |
| |
| unsigned mask0 = ~skipmask_left0 & ~skipmask_right0; |
| unsigned mask1 = ~skipmask_left1 & ~skipmask_right1; |
| |
| if (mask0 | mask1) { |
| do { |
| unsigned quadmask = (mask0 & 3) | ((mask1 & 3) << 2); |
| if (quadmask) { |
| setup->quad[q].input.x0 = lx; |
| setup->quad[q].input.y0 = setup->span.y; |
| setup->quad[q].input.facing = setup->facing; |
| setup->quad[q].inout.mask = quadmask; |
| setup->quad_ptrs[q] = &setup->quad[q]; |
| q++; |
| #if DEBUG_FRAGS |
| setup->numFragsEmitted += util_bitcount(quadmask); |
| #endif |
| } |
| mask0 >>= 2; |
| mask1 >>= 2; |
| lx += 2; |
| } while (mask0 | mask1); |
| |
| pipe->run( pipe, setup->quad_ptrs, q ); |
| } |
| } |
| |
| |
| setup->span.y = 0; |
| setup->span.right[0] = 0; |
| setup->span.right[1] = 0; |
| setup->span.left[0] = 1000000; /* greater than right[0] */ |
| setup->span.left[1] = 1000000; /* greater than right[1] */ |
| } |
| |
| |
| #if DEBUG_VERTS |
| static void |
| print_vertex(const struct setup_context *setup, |
| const float (*v)[4]) |
| { |
| int i; |
| debug_printf(" Vertex: (%p)\n", (void *) v); |
| for (i = 0; i < setup->nr_vertex_attrs; i++) { |
| debug_printf(" %d: %f %f %f %f\n", i, |
| v[i][0], v[i][1], v[i][2], v[i][3]); |
| if (util_is_inf_or_nan(v[i][0])) { |
| debug_printf(" NaN!\n"); |
| } |
| } |
| } |
| #endif |
| |
| |
| /** |
| * Sort the vertices from top to bottom order, setting up the triangle |
| * edge fields (ebot, emaj, etop). |
| * \return FALSE if coords are inf/nan (cull the tri), TRUE otherwise |
| */ |
| static boolean |
| setup_sort_vertices(struct setup_context *setup, |
| float det, |
| const float (*v0)[4], |
| const float (*v1)[4], |
| const float (*v2)[4]) |
| { |
| if (setup->softpipe->rasterizer->flatshade_first) |
| setup->vprovoke = v0; |
| else |
| setup->vprovoke = v2; |
| |
| /* determine bottom to top order of vertices */ |
| { |
| float y0 = v0[0][1]; |
| float y1 = v1[0][1]; |
| float y2 = v2[0][1]; |
| if (y0 <= y1) { |
| if (y1 <= y2) { |
| /* y0<=y1<=y2 */ |
| setup->vmin = v0; |
| setup->vmid = v1; |
| setup->vmax = v2; |
| } |
| else if (y2 <= y0) { |
| /* y2<=y0<=y1 */ |
| setup->vmin = v2; |
| setup->vmid = v0; |
| setup->vmax = v1; |
| } |
| else { |
| /* y0<=y2<=y1 */ |
| setup->vmin = v0; |
| setup->vmid = v2; |
| setup->vmax = v1; |
| } |
| } |
| else { |
| if (y0 <= y2) { |
| /* y1<=y0<=y2 */ |
| setup->vmin = v1; |
| setup->vmid = v0; |
| setup->vmax = v2; |
| } |
| else if (y2 <= y1) { |
| /* y2<=y1<=y0 */ |
| setup->vmin = v2; |
| setup->vmid = v1; |
| setup->vmax = v0; |
| } |
| else { |
| /* y1<=y2<=y0 */ |
| setup->vmin = v1; |
| setup->vmid = v2; |
| setup->vmax = v0; |
| } |
| } |
| } |
| |
| setup->ebot.dx = setup->vmid[0][0] - setup->vmin[0][0]; |
| setup->ebot.dy = setup->vmid[0][1] - setup->vmin[0][1]; |
| setup->emaj.dx = setup->vmax[0][0] - setup->vmin[0][0]; |
| setup->emaj.dy = setup->vmax[0][1] - setup->vmin[0][1]; |
| setup->etop.dx = setup->vmax[0][0] - setup->vmid[0][0]; |
| setup->etop.dy = setup->vmax[0][1] - setup->vmid[0][1]; |
| |
| /* |
| * Compute triangle's area. Use 1/area to compute partial |
| * derivatives of attributes later. |
| * |
| * The area will be the same as prim->det, but the sign may be |
| * different depending on how the vertices get sorted above. |
| * |
| * To determine whether the primitive is front or back facing we |
| * use the prim->det value because its sign is correct. |
| */ |
| { |
| const float area = (setup->emaj.dx * setup->ebot.dy - |
| setup->ebot.dx * setup->emaj.dy); |
| |
| setup->oneoverarea = 1.0f / area; |
| |
| /* |
| debug_printf("%s one-over-area %f area %f det %f\n", |
| __FUNCTION__, setup->oneoverarea, area, det ); |
| */ |
| if (util_is_inf_or_nan(setup->oneoverarea)) |
| return FALSE; |
| } |
| |
| /* We need to know if this is a front or back-facing triangle for: |
| * - the GLSL gl_FrontFacing fragment attribute (bool) |
| * - two-sided stencil test |
| * 0 = front-facing, 1 = back-facing |
| */ |
| setup->facing = |
| ((det < 0.0) ^ |
| (setup->softpipe->rasterizer->front_ccw)); |
| |
| { |
| unsigned face = setup->facing == 0 ? PIPE_FACE_FRONT : PIPE_FACE_BACK; |
| |
| if (face & setup->cull_face) |
| return FALSE; |
| } |
| |
| |
| /* Prepare pixel offset for rasterisation: |
| * - pixel center (0.5, 0.5) for GL, or |
| * - assume (0.0, 0.0) for other APIs. |
| */ |
| if (setup->softpipe->rasterizer->gl_rasterization_rules) { |
| setup->pixel_offset = 0.5f; |
| } else { |
| setup->pixel_offset = 0.0f; |
| } |
| |
| return TRUE; |
| } |
| |
| |
| /* Apply cylindrical wrapping to v0, v1, v2 coordinates, if enabled. |
| * Input coordinates must be in [0, 1] range, otherwise results are undefined. |
| * Some combinations of coordinates produce invalid results, |
| * but this behaviour is acceptable. |
| */ |
| static void |
| tri_apply_cylindrical_wrap(float v0, |
| float v1, |
| float v2, |
| uint cylindrical_wrap, |
| float output[3]) |
| { |
| if (cylindrical_wrap) { |
| float delta; |
| |
| delta = v1 - v0; |
| if (delta > 0.5f) { |
| v0 += 1.0f; |
| } |
| else if (delta < -0.5f) { |
| v1 += 1.0f; |
| } |
| |
| delta = v2 - v1; |
| if (delta > 0.5f) { |
| v1 += 1.0f; |
| } |
| else if (delta < -0.5f) { |
| v2 += 1.0f; |
| } |
| |
| delta = v0 - v2; |
| if (delta > 0.5f) { |
| v2 += 1.0f; |
| } |
| else if (delta < -0.5f) { |
| v0 += 1.0f; |
| } |
| } |
| |
| output[0] = v0; |
| output[1] = v1; |
| output[2] = v2; |
| } |
| |
| |
| /** |
| * Compute a0 for a constant-valued coefficient (GL_FLAT shading). |
| * The value value comes from vertex[slot][i]. |
| * The result will be put into setup->coef[slot].a0[i]. |
| * \param slot which attribute slot |
| * \param i which component of the slot (0..3) |
| */ |
| static void |
| const_coeff(struct setup_context *setup, |
| struct tgsi_interp_coef *coef, |
| uint vertSlot, uint i) |
| { |
| assert(i <= 3); |
| |
| coef->dadx[i] = 0; |
| coef->dady[i] = 0; |
| |
| /* need provoking vertex info! |
| */ |
| coef->a0[i] = setup->vprovoke[vertSlot][i]; |
| } |
| |
| |
| /** |
| * Compute a0, dadx and dady for a linearly interpolated coefficient, |
| * for a triangle. |
| * v[0], v[1] and v[2] are vmin, vmid and vmax, respectively. |
| */ |
| static void |
| tri_linear_coeff(struct setup_context *setup, |
| struct tgsi_interp_coef *coef, |
| uint i, |
| const float v[3]) |
| { |
| float botda = v[1] - v[0]; |
| float majda = v[2] - v[0]; |
| float a = setup->ebot.dy * majda - botda * setup->emaj.dy; |
| float b = setup->emaj.dx * botda - majda * setup->ebot.dx; |
| float dadx = a * setup->oneoverarea; |
| float dady = b * setup->oneoverarea; |
| |
| assert(i <= 3); |
| |
| coef->dadx[i] = dadx; |
| coef->dady[i] = dady; |
| |
| /* calculate a0 as the value which would be sampled for the |
| * fragment at (0,0), taking into account that we want to sample at |
| * pixel centers, in other words (pixel_offset, pixel_offset). |
| * |
| * this is neat but unfortunately not a good way to do things for |
| * triangles with very large values of dadx or dady as it will |
| * result in the subtraction and re-addition from a0 of a very |
| * large number, which means we'll end up loosing a lot of the |
| * fractional bits and precision from a0. the way to fix this is |
| * to define a0 as the sample at a pixel center somewhere near vmin |
| * instead - i'll switch to this later. |
| */ |
| coef->a0[i] = (v[0] - |
| (dadx * (setup->vmin[0][0] - setup->pixel_offset) + |
| dady * (setup->vmin[0][1] - setup->pixel_offset))); |
| |
| /* |
| debug_printf("attr[%d].%c: %f dx:%f dy:%f\n", |
| slot, "xyzw"[i], |
| setup->coef[slot].a0[i], |
| setup->coef[slot].dadx[i], |
| setup->coef[slot].dady[i]); |
| */ |
| } |
| |
| |
| /** |
| * Compute a0, dadx and dady for a perspective-corrected interpolant, |
| * for a triangle. |
| * We basically multiply the vertex value by 1/w before computing |
| * the plane coefficients (a0, dadx, dady). |
| * Later, when we compute the value at a particular fragment position we'll |
| * divide the interpolated value by the interpolated W at that fragment. |
| * v[0], v[1] and v[2] are vmin, vmid and vmax, respectively. |
| */ |
| static void |
| tri_persp_coeff(struct setup_context *setup, |
| struct tgsi_interp_coef *coef, |
| uint i, |
| const float v[3]) |
| { |
| /* premultiply by 1/w (v[0][3] is always W): |
| */ |
| float mina = v[0] * setup->vmin[0][3]; |
| float mida = v[1] * setup->vmid[0][3]; |
| float maxa = v[2] * setup->vmax[0][3]; |
| float botda = mida - mina; |
| float majda = maxa - mina; |
| float a = setup->ebot.dy * majda - botda * setup->emaj.dy; |
| float b = setup->emaj.dx * botda - majda * setup->ebot.dx; |
| float dadx = a * setup->oneoverarea; |
| float dady = b * setup->oneoverarea; |
| |
| /* |
| debug_printf("tri persp %d,%d: %f %f %f\n", vertSlot, i, |
| setup->vmin[vertSlot][i], |
| setup->vmid[vertSlot][i], |
| setup->vmax[vertSlot][i] |
| ); |
| */ |
| assert(i <= 3); |
| |
| coef->dadx[i] = dadx; |
| coef->dady[i] = dady; |
| coef->a0[i] = (mina - |
| (dadx * (setup->vmin[0][0] - setup->pixel_offset) + |
| dady * (setup->vmin[0][1] - setup->pixel_offset))); |
| } |
| |
| |
| /** |
| * Special coefficient setup for gl_FragCoord. |
| * X and Y are trivial, though Y may have to be inverted for OpenGL. |
| * Z and W are copied from posCoef which should have already been computed. |
| * We could do a bit less work if we'd examine gl_FragCoord's swizzle mask. |
| */ |
| static void |
| setup_fragcoord_coeff(struct setup_context *setup, uint slot) |
| { |
| const struct tgsi_shader_info *fsInfo = &setup->softpipe->fs_variant->info; |
| |
| /*X*/ |
| setup->coef[slot].a0[0] = fsInfo->pixel_center_integer ? 0.0 : 0.5; |
| setup->coef[slot].dadx[0] = 1.0; |
| setup->coef[slot].dady[0] = 0.0; |
| /*Y*/ |
| setup->coef[slot].a0[1] = |
| (fsInfo->origin_lower_left ? setup->softpipe->framebuffer.height-1 : 0) |
| + (fsInfo->pixel_center_integer ? 0.0 : 0.5); |
| setup->coef[slot].dadx[1] = 0.0; |
| setup->coef[slot].dady[1] = fsInfo->origin_lower_left ? -1.0 : 1.0; |
| /*Z*/ |
| setup->coef[slot].a0[2] = setup->posCoef.a0[2]; |
| setup->coef[slot].dadx[2] = setup->posCoef.dadx[2]; |
| setup->coef[slot].dady[2] = setup->posCoef.dady[2]; |
| /*W*/ |
| setup->coef[slot].a0[3] = setup->posCoef.a0[3]; |
| setup->coef[slot].dadx[3] = setup->posCoef.dadx[3]; |
| setup->coef[slot].dady[3] = setup->posCoef.dady[3]; |
| } |
| |
| |
| |
| /** |
| * Compute the setup->coef[] array dadx, dady, a0 values. |
| * Must be called after setup->vmin,vmid,vmax,vprovoke are initialized. |
| */ |
| static void |
| setup_tri_coefficients(struct setup_context *setup) |
| { |
| struct softpipe_context *softpipe = setup->softpipe; |
| const struct tgsi_shader_info *fsInfo = &setup->softpipe->fs_variant->info; |
| const struct vertex_info *vinfo = softpipe_get_vertex_info(softpipe); |
| uint fragSlot; |
| float v[3]; |
| |
| /* z and w are done by linear interpolation: |
| */ |
| v[0] = setup->vmin[0][2]; |
| v[1] = setup->vmid[0][2]; |
| v[2] = setup->vmax[0][2]; |
| tri_linear_coeff(setup, &setup->posCoef, 2, v); |
| |
| v[0] = setup->vmin[0][3]; |
| v[1] = setup->vmid[0][3]; |
| v[2] = setup->vmax[0][3]; |
| tri_linear_coeff(setup, &setup->posCoef, 3, v); |
| |
| /* setup interpolation for all the remaining attributes: |
| */ |
| for (fragSlot = 0; fragSlot < fsInfo->num_inputs; fragSlot++) { |
| const uint vertSlot = vinfo->attrib[fragSlot].src_index; |
| uint j; |
| |
| switch (vinfo->attrib[fragSlot].interp_mode) { |
| case INTERP_CONSTANT: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) |
| const_coeff(setup, &setup->coef[fragSlot], vertSlot, j); |
| break; |
| case INTERP_LINEAR: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) { |
| tri_apply_cylindrical_wrap(setup->vmin[vertSlot][j], |
| setup->vmid[vertSlot][j], |
| setup->vmax[vertSlot][j], |
| fsInfo->input_cylindrical_wrap[fragSlot] & (1 << j), |
| v); |
| tri_linear_coeff(setup, &setup->coef[fragSlot], j, v); |
| } |
| break; |
| case INTERP_PERSPECTIVE: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) { |
| tri_apply_cylindrical_wrap(setup->vmin[vertSlot][j], |
| setup->vmid[vertSlot][j], |
| setup->vmax[vertSlot][j], |
| fsInfo->input_cylindrical_wrap[fragSlot] & (1 << j), |
| v); |
| tri_persp_coeff(setup, &setup->coef[fragSlot], j, v); |
| } |
| break; |
| case INTERP_POS: |
| setup_fragcoord_coeff(setup, fragSlot); |
| break; |
| default: |
| assert(0); |
| } |
| |
| if (fsInfo->input_semantic_name[fragSlot] == TGSI_SEMANTIC_FACE) { |
| /* convert 0 to 1.0 and 1 to -1.0 */ |
| setup->coef[fragSlot].a0[0] = setup->facing * -2.0f + 1.0f; |
| setup->coef[fragSlot].dadx[0] = 0.0; |
| setup->coef[fragSlot].dady[0] = 0.0; |
| } |
| } |
| } |
| |
| |
| static void |
| setup_tri_edges(struct setup_context *setup) |
| { |
| float vmin_x = setup->vmin[0][0] + setup->pixel_offset; |
| float vmid_x = setup->vmid[0][0] + setup->pixel_offset; |
| |
| float vmin_y = setup->vmin[0][1] - setup->pixel_offset; |
| float vmid_y = setup->vmid[0][1] - setup->pixel_offset; |
| float vmax_y = setup->vmax[0][1] - setup->pixel_offset; |
| |
| setup->emaj.sy = ceilf(vmin_y); |
| setup->emaj.lines = (int) ceilf(vmax_y - setup->emaj.sy); |
| setup->emaj.dxdy = setup->emaj.dy ? setup->emaj.dx / setup->emaj.dy : .0f; |
| setup->emaj.sx = vmin_x + (setup->emaj.sy - vmin_y) * setup->emaj.dxdy; |
| |
| setup->etop.sy = ceilf(vmid_y); |
| setup->etop.lines = (int) ceilf(vmax_y - setup->etop.sy); |
| setup->etop.dxdy = setup->etop.dy ? setup->etop.dx / setup->etop.dy : .0f; |
| setup->etop.sx = vmid_x + (setup->etop.sy - vmid_y) * setup->etop.dxdy; |
| |
| setup->ebot.sy = ceilf(vmin_y); |
| setup->ebot.lines = (int) ceilf(vmid_y - setup->ebot.sy); |
| setup->ebot.dxdy = setup->ebot.dy ? setup->ebot.dx / setup->ebot.dy : .0f; |
| setup->ebot.sx = vmin_x + (setup->ebot.sy - vmin_y) * setup->ebot.dxdy; |
| } |
| |
| |
| /** |
| * Render the upper or lower half of a triangle. |
| * Scissoring/cliprect is applied here too. |
| */ |
| static void |
| subtriangle(struct setup_context *setup, |
| struct edge *eleft, |
| struct edge *eright, |
| int lines) |
| { |
| const struct pipe_scissor_state *cliprect = &setup->softpipe->cliprect; |
| const int minx = (int) cliprect->minx; |
| const int maxx = (int) cliprect->maxx; |
| const int miny = (int) cliprect->miny; |
| const int maxy = (int) cliprect->maxy; |
| int y, start_y, finish_y; |
| int sy = (int)eleft->sy; |
| |
| assert((int)eleft->sy == (int) eright->sy); |
| assert(lines >= 0); |
| |
| /* clip top/bottom */ |
| start_y = sy; |
| if (start_y < miny) |
| start_y = miny; |
| |
| finish_y = sy + lines; |
| if (finish_y > maxy) |
| finish_y = maxy; |
| |
| start_y -= sy; |
| finish_y -= sy; |
| |
| /* |
| debug_printf("%s %d %d\n", __FUNCTION__, start_y, finish_y); |
| */ |
| |
| for (y = start_y; y < finish_y; y++) { |
| |
| /* avoid accumulating adds as floats don't have the precision to |
| * accurately iterate large triangle edges that way. luckily we |
| * can just multiply these days. |
| * |
| * this is all drowned out by the attribute interpolation anyway. |
| */ |
| int left = (int)(eleft->sx + y * eleft->dxdy); |
| int right = (int)(eright->sx + y * eright->dxdy); |
| |
| /* clip left/right */ |
| if (left < minx) |
| left = minx; |
| if (right > maxx) |
| right = maxx; |
| |
| if (left < right) { |
| int _y = sy + y; |
| if (block(_y) != setup->span.y) { |
| flush_spans(setup); |
| setup->span.y = block(_y); |
| } |
| |
| setup->span.left[_y&1] = left; |
| setup->span.right[_y&1] = right; |
| } |
| } |
| |
| |
| /* save the values so that emaj can be restarted: |
| */ |
| eleft->sx += lines * eleft->dxdy; |
| eright->sx += lines * eright->dxdy; |
| eleft->sy += lines; |
| eright->sy += lines; |
| } |
| |
| |
| /** |
| * Recalculate prim's determinant. This is needed as we don't have |
| * get this information through the vbuf_render interface & we must |
| * calculate it here. |
| */ |
| static float |
| calc_det(const float (*v0)[4], |
| const float (*v1)[4], |
| const float (*v2)[4]) |
| { |
| /* edge vectors e = v0 - v2, f = v1 - v2 */ |
| const float ex = v0[0][0] - v2[0][0]; |
| const float ey = v0[0][1] - v2[0][1]; |
| const float fx = v1[0][0] - v2[0][0]; |
| const float fy = v1[0][1] - v2[0][1]; |
| |
| /* det = cross(e,f).z */ |
| return ex * fy - ey * fx; |
| } |
| |
| |
| /** |
| * Do setup for triangle rasterization, then render the triangle. |
| */ |
| void |
| sp_setup_tri(struct setup_context *setup, |
| const float (*v0)[4], |
| const float (*v1)[4], |
| const float (*v2)[4]) |
| { |
| float det; |
| |
| #if DEBUG_VERTS |
| debug_printf("Setup triangle:\n"); |
| print_vertex(setup, v0); |
| print_vertex(setup, v1); |
| print_vertex(setup, v2); |
| #endif |
| |
| if (setup->softpipe->no_rast || setup->softpipe->rasterizer->rasterizer_discard) |
| return; |
| |
| det = calc_det(v0, v1, v2); |
| /* |
| debug_printf("%s\n", __FUNCTION__ ); |
| */ |
| |
| #if DEBUG_FRAGS |
| setup->numFragsEmitted = 0; |
| setup->numFragsWritten = 0; |
| #endif |
| |
| if (!setup_sort_vertices( setup, det, v0, v1, v2 )) |
| return; |
| |
| setup_tri_coefficients( setup ); |
| setup_tri_edges( setup ); |
| |
| assert(setup->softpipe->reduced_prim == PIPE_PRIM_TRIANGLES); |
| |
| setup->span.y = 0; |
| setup->span.right[0] = 0; |
| setup->span.right[1] = 0; |
| /* setup->span.z_mode = tri_z_mode( setup->ctx ); */ |
| |
| /* init_constant_attribs( setup ); */ |
| |
| if (setup->oneoverarea < 0.0) { |
| /* emaj on left: |
| */ |
| subtriangle( setup, &setup->emaj, &setup->ebot, setup->ebot.lines ); |
| subtriangle( setup, &setup->emaj, &setup->etop, setup->etop.lines ); |
| } |
| else { |
| /* emaj on right: |
| */ |
| subtriangle( setup, &setup->ebot, &setup->emaj, setup->ebot.lines ); |
| subtriangle( setup, &setup->etop, &setup->emaj, setup->etop.lines ); |
| } |
| |
| flush_spans( setup ); |
| |
| #if DEBUG_FRAGS |
| printf("Tri: %u frags emitted, %u written\n", |
| setup->numFragsEmitted, |
| setup->numFragsWritten); |
| #endif |
| } |
| |
| |
| /* Apply cylindrical wrapping to v0, v1 coordinates, if enabled. |
| * Input coordinates must be in [0, 1] range, otherwise results are undefined. |
| */ |
| static void |
| line_apply_cylindrical_wrap(float v0, |
| float v1, |
| uint cylindrical_wrap, |
| float output[2]) |
| { |
| if (cylindrical_wrap) { |
| float delta; |
| |
| delta = v1 - v0; |
| if (delta > 0.5f) { |
| v0 += 1.0f; |
| } |
| else if (delta < -0.5f) { |
| v1 += 1.0f; |
| } |
| } |
| |
| output[0] = v0; |
| output[1] = v1; |
| } |
| |
| |
| /** |
| * Compute a0, dadx and dady for a linearly interpolated coefficient, |
| * for a line. |
| * v[0] and v[1] are vmin and vmax, respectively. |
| */ |
| static void |
| line_linear_coeff(const struct setup_context *setup, |
| struct tgsi_interp_coef *coef, |
| uint i, |
| const float v[2]) |
| { |
| const float da = v[1] - v[0]; |
| const float dadx = da * setup->emaj.dx * setup->oneoverarea; |
| const float dady = da * setup->emaj.dy * setup->oneoverarea; |
| coef->dadx[i] = dadx; |
| coef->dady[i] = dady; |
| coef->a0[i] = (v[0] - |
| (dadx * (setup->vmin[0][0] - setup->pixel_offset) + |
| dady * (setup->vmin[0][1] - setup->pixel_offset))); |
| } |
| |
| |
| /** |
| * Compute a0, dadx and dady for a perspective-corrected interpolant, |
| * for a line. |
| * v[0] and v[1] are vmin and vmax, respectively. |
| */ |
| static void |
| line_persp_coeff(const struct setup_context *setup, |
| struct tgsi_interp_coef *coef, |
| uint i, |
| const float v[2]) |
| { |
| const float a0 = v[0] * setup->vmin[0][3]; |
| const float a1 = v[1] * setup->vmax[0][3]; |
| const float da = a1 - a0; |
| const float dadx = da * setup->emaj.dx * setup->oneoverarea; |
| const float dady = da * setup->emaj.dy * setup->oneoverarea; |
| coef->dadx[i] = dadx; |
| coef->dady[i] = dady; |
| coef->a0[i] = (a0 - |
| (dadx * (setup->vmin[0][0] - setup->pixel_offset) + |
| dady * (setup->vmin[0][1] - setup->pixel_offset))); |
| } |
| |
| |
| /** |
| * Compute the setup->coef[] array dadx, dady, a0 values. |
| * Must be called after setup->vmin,vmax are initialized. |
| */ |
| static boolean |
| setup_line_coefficients(struct setup_context *setup, |
| const float (*v0)[4], |
| const float (*v1)[4]) |
| { |
| struct softpipe_context *softpipe = setup->softpipe; |
| const struct tgsi_shader_info *fsInfo = &setup->softpipe->fs_variant->info; |
| const struct vertex_info *vinfo = softpipe_get_vertex_info(softpipe); |
| uint fragSlot; |
| float area; |
| float v[2]; |
| |
| /* use setup->vmin, vmax to point to vertices */ |
| if (softpipe->rasterizer->flatshade_first) |
| setup->vprovoke = v0; |
| else |
| setup->vprovoke = v1; |
| setup->vmin = v0; |
| setup->vmax = v1; |
| |
| setup->emaj.dx = setup->vmax[0][0] - setup->vmin[0][0]; |
| setup->emaj.dy = setup->vmax[0][1] - setup->vmin[0][1]; |
| |
| /* NOTE: this is not really area but something proportional to it */ |
| area = setup->emaj.dx * setup->emaj.dx + setup->emaj.dy * setup->emaj.dy; |
| if (area == 0.0f || util_is_inf_or_nan(area)) |
| return FALSE; |
| setup->oneoverarea = 1.0f / area; |
| |
| /* z and w are done by linear interpolation: |
| */ |
| v[0] = setup->vmin[0][2]; |
| v[1] = setup->vmax[0][2]; |
| line_linear_coeff(setup, &setup->posCoef, 2, v); |
| |
| v[0] = setup->vmin[0][3]; |
| v[1] = setup->vmax[0][3]; |
| line_linear_coeff(setup, &setup->posCoef, 3, v); |
| |
| /* setup interpolation for all the remaining attributes: |
| */ |
| for (fragSlot = 0; fragSlot < fsInfo->num_inputs; fragSlot++) { |
| const uint vertSlot = vinfo->attrib[fragSlot].src_index; |
| uint j; |
| |
| switch (vinfo->attrib[fragSlot].interp_mode) { |
| case INTERP_CONSTANT: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) |
| const_coeff(setup, &setup->coef[fragSlot], vertSlot, j); |
| break; |
| case INTERP_LINEAR: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) { |
| line_apply_cylindrical_wrap(setup->vmin[vertSlot][j], |
| setup->vmax[vertSlot][j], |
| fsInfo->input_cylindrical_wrap[fragSlot] & (1 << j), |
| v); |
| line_linear_coeff(setup, &setup->coef[fragSlot], j, v); |
| } |
| break; |
| case INTERP_PERSPECTIVE: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) { |
| line_apply_cylindrical_wrap(setup->vmin[vertSlot][j], |
| setup->vmax[vertSlot][j], |
| fsInfo->input_cylindrical_wrap[fragSlot] & (1 << j), |
| v); |
| line_persp_coeff(setup, &setup->coef[fragSlot], j, v); |
| } |
| break; |
| case INTERP_POS: |
| setup_fragcoord_coeff(setup, fragSlot); |
| break; |
| default: |
| assert(0); |
| } |
| |
| if (fsInfo->input_semantic_name[fragSlot] == TGSI_SEMANTIC_FACE) { |
| /* convert 0 to 1.0 and 1 to -1.0 */ |
| setup->coef[fragSlot].a0[0] = setup->facing * -2.0f + 1.0f; |
| setup->coef[fragSlot].dadx[0] = 0.0; |
| setup->coef[fragSlot].dady[0] = 0.0; |
| } |
| } |
| return TRUE; |
| } |
| |
| |
| /** |
| * Plot a pixel in a line segment. |
| */ |
| static INLINE void |
| plot(struct setup_context *setup, int x, int y) |
| { |
| const int iy = y & 1; |
| const int ix = x & 1; |
| const int quadX = x - ix; |
| const int quadY = y - iy; |
| const int mask = (1 << ix) << (2 * iy); |
| |
| if (quadX != setup->quad[0].input.x0 || |
| quadY != setup->quad[0].input.y0) |
| { |
| /* flush prev quad, start new quad */ |
| |
| if (setup->quad[0].input.x0 != -1) |
| clip_emit_quad( setup, &setup->quad[0] ); |
| |
| setup->quad[0].input.x0 = quadX; |
| setup->quad[0].input.y0 = quadY; |
| setup->quad[0].inout.mask = 0x0; |
| } |
| |
| setup->quad[0].inout.mask |= mask; |
| } |
| |
| |
| /** |
| * Do setup for line rasterization, then render the line. |
| * Single-pixel width, no stipple, etc. We rely on the 'draw' module |
| * to handle stippling and wide lines. |
| */ |
| void |
| sp_setup_line(struct setup_context *setup, |
| const float (*v0)[4], |
| const float (*v1)[4]) |
| { |
| int x0 = (int) v0[0][0]; |
| int x1 = (int) v1[0][0]; |
| int y0 = (int) v0[0][1]; |
| int y1 = (int) v1[0][1]; |
| int dx = x1 - x0; |
| int dy = y1 - y0; |
| int xstep, ystep; |
| |
| #if DEBUG_VERTS |
| debug_printf("Setup line:\n"); |
| print_vertex(setup, v0); |
| print_vertex(setup, v1); |
| #endif |
| |
| if (setup->softpipe->no_rast || setup->softpipe->rasterizer->rasterizer_discard) |
| return; |
| |
| if (dx == 0 && dy == 0) |
| return; |
| |
| if (!setup_line_coefficients(setup, v0, v1)) |
| return; |
| |
| assert(v0[0][0] < 1.0e9); |
| assert(v0[0][1] < 1.0e9); |
| assert(v1[0][0] < 1.0e9); |
| assert(v1[0][1] < 1.0e9); |
| |
| if (dx < 0) { |
| dx = -dx; /* make positive */ |
| xstep = -1; |
| } |
| else { |
| xstep = 1; |
| } |
| |
| if (dy < 0) { |
| dy = -dy; /* make positive */ |
| ystep = -1; |
| } |
| else { |
| ystep = 1; |
| } |
| |
| assert(dx >= 0); |
| assert(dy >= 0); |
| assert(setup->softpipe->reduced_prim == PIPE_PRIM_LINES); |
| |
| setup->quad[0].input.x0 = setup->quad[0].input.y0 = -1; |
| setup->quad[0].inout.mask = 0x0; |
| |
| /* XXX temporary: set coverage to 1.0 so the line appears |
| * if AA mode happens to be enabled. |
| */ |
| setup->quad[0].input.coverage[0] = |
| setup->quad[0].input.coverage[1] = |
| setup->quad[0].input.coverage[2] = |
| setup->quad[0].input.coverage[3] = 1.0; |
| |
| if (dx > dy) { |
| /*** X-major line ***/ |
| int i; |
| const int errorInc = dy + dy; |
| int error = errorInc - dx; |
| const int errorDec = error - dx; |
| |
| for (i = 0; i < dx; i++) { |
| plot(setup, x0, y0); |
| |
| x0 += xstep; |
| if (error < 0) { |
| error += errorInc; |
| } |
| else { |
| error += errorDec; |
| y0 += ystep; |
| } |
| } |
| } |
| else { |
| /*** Y-major line ***/ |
| int i; |
| const int errorInc = dx + dx; |
| int error = errorInc - dy; |
| const int errorDec = error - dy; |
| |
| for (i = 0; i < dy; i++) { |
| plot(setup, x0, y0); |
| |
| y0 += ystep; |
| if (error < 0) { |
| error += errorInc; |
| } |
| else { |
| error += errorDec; |
| x0 += xstep; |
| } |
| } |
| } |
| |
| /* draw final quad */ |
| if (setup->quad[0].inout.mask) { |
| clip_emit_quad( setup, &setup->quad[0] ); |
| } |
| } |
| |
| |
| static void |
| point_persp_coeff(const struct setup_context *setup, |
| const float (*vert)[4], |
| struct tgsi_interp_coef *coef, |
| uint vertSlot, uint i) |
| { |
| assert(i <= 3); |
| coef->dadx[i] = 0.0F; |
| coef->dady[i] = 0.0F; |
| coef->a0[i] = vert[vertSlot][i] * vert[0][3]; |
| } |
| |
| |
| /** |
| * Do setup for point rasterization, then render the point. |
| * Round or square points... |
| * XXX could optimize a lot for 1-pixel points. |
| */ |
| void |
| sp_setup_point(struct setup_context *setup, |
| const float (*v0)[4]) |
| { |
| struct softpipe_context *softpipe = setup->softpipe; |
| const struct tgsi_shader_info *fsInfo = &setup->softpipe->fs_variant->info; |
| const int sizeAttr = setup->softpipe->psize_slot; |
| const float size |
| = sizeAttr > 0 ? v0[sizeAttr][0] |
| : setup->softpipe->rasterizer->point_size; |
| const float halfSize = 0.5F * size; |
| const boolean round = (boolean) setup->softpipe->rasterizer->point_smooth; |
| const float x = v0[0][0]; /* Note: data[0] is always position */ |
| const float y = v0[0][1]; |
| const struct vertex_info *vinfo = softpipe_get_vertex_info(softpipe); |
| uint fragSlot; |
| |
| #if DEBUG_VERTS |
| debug_printf("Setup point:\n"); |
| print_vertex(setup, v0); |
| #endif |
| |
| if (setup->softpipe->no_rast || setup->softpipe->rasterizer->rasterizer_discard) |
| return; |
| |
| assert(setup->softpipe->reduced_prim == PIPE_PRIM_POINTS); |
| |
| /* For points, all interpolants are constant-valued. |
| * However, for point sprites, we'll need to setup texcoords appropriately. |
| * XXX: which coefficients are the texcoords??? |
| * We may do point sprites as textured quads... |
| * |
| * KW: We don't know which coefficients are texcoords - ultimately |
| * the choice of what interpolation mode to use for each attribute |
| * should be determined by the fragment program, using |
| * per-attribute declaration statements that include interpolation |
| * mode as a parameter. So either the fragment program will have |
| * to be adjusted for pointsprite vs normal point behaviour, or |
| * otherwise a special interpolation mode will have to be defined |
| * which matches the required behaviour for point sprites. But - |
| * the latter is not a feature of normal hardware, and as such |
| * probably should be ruled out on that basis. |
| */ |
| setup->vprovoke = v0; |
| |
| /* setup Z, W */ |
| const_coeff(setup, &setup->posCoef, 0, 2); |
| const_coeff(setup, &setup->posCoef, 0, 3); |
| |
| for (fragSlot = 0; fragSlot < fsInfo->num_inputs; fragSlot++) { |
| const uint vertSlot = vinfo->attrib[fragSlot].src_index; |
| uint j; |
| |
| switch (vinfo->attrib[fragSlot].interp_mode) { |
| case INTERP_CONSTANT: |
| /* fall-through */ |
| case INTERP_LINEAR: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) |
| const_coeff(setup, &setup->coef[fragSlot], vertSlot, j); |
| break; |
| case INTERP_PERSPECTIVE: |
| for (j = 0; j < TGSI_NUM_CHANNELS; j++) |
| point_persp_coeff(setup, setup->vprovoke, |
| &setup->coef[fragSlot], vertSlot, j); |
| break; |
| case INTERP_POS: |
| setup_fragcoord_coeff(setup, fragSlot); |
| break; |
| default: |
| assert(0); |
| } |
| |
| if (fsInfo->input_semantic_name[fragSlot] == TGSI_SEMANTIC_FACE) { |
| /* convert 0 to 1.0 and 1 to -1.0 */ |
| setup->coef[fragSlot].a0[0] = setup->facing * -2.0f + 1.0f; |
| setup->coef[fragSlot].dadx[0] = 0.0; |
| setup->coef[fragSlot].dady[0] = 0.0; |
| } |
| } |
| |
| |
| if (halfSize <= 0.5 && !round) { |
| /* special case for 1-pixel points */ |
| const int ix = ((int) x) & 1; |
| const int iy = ((int) y) & 1; |
| setup->quad[0].input.x0 = (int) x - ix; |
| setup->quad[0].input.y0 = (int) y - iy; |
| setup->quad[0].inout.mask = (1 << ix) << (2 * iy); |
| clip_emit_quad( setup, &setup->quad[0] ); |
| } |
| else { |
| if (round) { |
| /* rounded points */ |
| const int ixmin = block((int) (x - halfSize)); |
| const int ixmax = block((int) (x + halfSize)); |
| const int iymin = block((int) (y - halfSize)); |
| const int iymax = block((int) (y + halfSize)); |
| const float rmin = halfSize - 0.7071F; /* 0.7071 = sqrt(2)/2 */ |
| const float rmax = halfSize + 0.7071F; |
| const float rmin2 = MAX2(0.0F, rmin * rmin); |
| const float rmax2 = rmax * rmax; |
| const float cscale = 1.0F / (rmax2 - rmin2); |
| int ix, iy; |
| |
| for (iy = iymin; iy <= iymax; iy += 2) { |
| for (ix = ixmin; ix <= ixmax; ix += 2) { |
| float dx, dy, dist2, cover; |
| |
| setup->quad[0].inout.mask = 0x0; |
| |
| dx = (ix + 0.5f) - x; |
| dy = (iy + 0.5f) - y; |
| dist2 = dx * dx + dy * dy; |
| if (dist2 <= rmax2) { |
| cover = 1.0F - (dist2 - rmin2) * cscale; |
| setup->quad[0].input.coverage[QUAD_TOP_LEFT] = MIN2(cover, 1.0f); |
| setup->quad[0].inout.mask |= MASK_TOP_LEFT; |
| } |
| |
| dx = (ix + 1.5f) - x; |
| dy = (iy + 0.5f) - y; |
| dist2 = dx * dx + dy * dy; |
| if (dist2 <= rmax2) { |
| cover = 1.0F - (dist2 - rmin2) * cscale; |
| setup->quad[0].input.coverage[QUAD_TOP_RIGHT] = MIN2(cover, 1.0f); |
| setup->quad[0].inout.mask |= MASK_TOP_RIGHT; |
| } |
| |
| dx = (ix + 0.5f) - x; |
| dy = (iy + 1.5f) - y; |
| dist2 = dx * dx + dy * dy; |
| if (dist2 <= rmax2) { |
| cover = 1.0F - (dist2 - rmin2) * cscale; |
| setup->quad[0].input.coverage[QUAD_BOTTOM_LEFT] = MIN2(cover, 1.0f); |
| setup->quad[0].inout.mask |= MASK_BOTTOM_LEFT; |
| } |
| |
| dx = (ix + 1.5f) - x; |
| dy = (iy + 1.5f) - y; |
| dist2 = dx * dx + dy * dy; |
| if (dist2 <= rmax2) { |
| cover = 1.0F - (dist2 - rmin2) * cscale; |
| setup->quad[0].input.coverage[QUAD_BOTTOM_RIGHT] = MIN2(cover, 1.0f); |
| setup->quad[0].inout.mask |= MASK_BOTTOM_RIGHT; |
| } |
| |
| if (setup->quad[0].inout.mask) { |
| setup->quad[0].input.x0 = ix; |
| setup->quad[0].input.y0 = iy; |
| clip_emit_quad( setup, &setup->quad[0] ); |
| } |
| } |
| } |
| } |
| else { |
| /* square points */ |
| const int xmin = (int) (x + 0.75 - halfSize); |
| const int ymin = (int) (y + 0.25 - halfSize); |
| const int xmax = xmin + (int) size; |
| const int ymax = ymin + (int) size; |
| /* XXX could apply scissor to xmin,ymin,xmax,ymax now */ |
| const int ixmin = block(xmin); |
| const int ixmax = block(xmax - 1); |
| const int iymin = block(ymin); |
| const int iymax = block(ymax - 1); |
| int ix, iy; |
| |
| /* |
| debug_printf("(%f, %f) -> X:%d..%d Y:%d..%d\n", x, y, xmin, xmax,ymin,ymax); |
| */ |
| for (iy = iymin; iy <= iymax; iy += 2) { |
| uint rowMask = 0xf; |
| if (iy < ymin) { |
| /* above the top edge */ |
| rowMask &= (MASK_BOTTOM_LEFT | MASK_BOTTOM_RIGHT); |
| } |
| if (iy + 1 >= ymax) { |
| /* below the bottom edge */ |
| rowMask &= (MASK_TOP_LEFT | MASK_TOP_RIGHT); |
| } |
| |
| for (ix = ixmin; ix <= ixmax; ix += 2) { |
| uint mask = rowMask; |
| |
| if (ix < xmin) { |
| /* fragment is past left edge of point, turn off left bits */ |
| mask &= (MASK_BOTTOM_RIGHT | MASK_TOP_RIGHT); |
| } |
| if (ix + 1 >= xmax) { |
| /* past the right edge */ |
| mask &= (MASK_BOTTOM_LEFT | MASK_TOP_LEFT); |
| } |
| |
| setup->quad[0].inout.mask = mask; |
| setup->quad[0].input.x0 = ix; |
| setup->quad[0].input.y0 = iy; |
| clip_emit_quad( setup, &setup->quad[0] ); |
| } |
| } |
| } |
| } |
| } |
| |
| |
| /** |
| * Called by vbuf code just before we start buffering primitives. |
| */ |
| void |
| sp_setup_prepare(struct setup_context *setup) |
| { |
| struct softpipe_context *sp = setup->softpipe; |
| |
| if (sp->dirty) { |
| softpipe_update_derived(sp, sp->reduced_api_prim); |
| } |
| |
| /* Note: nr_attrs is only used for debugging (vertex printing) */ |
| setup->nr_vertex_attrs = draw_num_shader_outputs(sp->draw); |
| |
| sp->quad.first->begin( sp->quad.first ); |
| |
| if (sp->reduced_api_prim == PIPE_PRIM_TRIANGLES && |
| sp->rasterizer->fill_front == PIPE_POLYGON_MODE_FILL && |
| sp->rasterizer->fill_back == PIPE_POLYGON_MODE_FILL) { |
| /* we'll do culling */ |
| setup->cull_face = sp->rasterizer->cull_face; |
| } |
| else { |
| /* 'draw' will do culling */ |
| setup->cull_face = PIPE_FACE_NONE; |
| } |
| } |
| |
| |
| void |
| sp_setup_destroy_context(struct setup_context *setup) |
| { |
| FREE( setup ); |
| } |
| |
| |
| /** |
| * Create a new primitive setup/render stage. |
| */ |
| struct setup_context * |
| sp_setup_create_context(struct softpipe_context *softpipe) |
| { |
| struct setup_context *setup = CALLOC_STRUCT(setup_context); |
| unsigned i; |
| |
| setup->softpipe = softpipe; |
| |
| for (i = 0; i < MAX_QUADS; i++) { |
| setup->quad[i].coef = setup->coef; |
| setup->quad[i].posCoef = &setup->posCoef; |
| } |
| |
| setup->span.left[0] = 1000000; /* greater than right[0] */ |
| setup->span.left[1] = 1000000; /* greater than right[1] */ |
| |
| return setup; |
| } |