Source/platform/audio/HRTFPanner.cpp - platform/external/chromium_org/third_party/WebKit - Git at Google

 /*
  * Copyright (C) 2010, Google Inc. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1.  Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2.  Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  *
  * THIS SOFTWARE IS PROVIDED BY APPLE INC. AND ITS CONTRIBUTORS ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR ITS CONTRIBUTORS BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include "config.h"

 #if ENABLE(WEB_AUDIO)

 #include "platform/audio/HRTFPanner.h"

 #include <algorithm>
 #include "platform/audio/AudioBus.h"
 #include "platform/audio/AudioUtilities.h"
 #include "platform/audio/HRTFDatabase.h"
 #include "wtf/MathExtras.h"
 #include "wtf/RefPtr.h"

 namespace blink {

 // The value of 2 milliseconds is larger than the largest delay which exists in any HRTFKernel from the default HRTFDatabase (0.0136 seconds).
 // We ASSERT the delay values used in process() with this value.
 const double MaxDelayTimeSeconds = 0.002;

 const int UninitializedAzimuth = -1;
 const unsigned RenderingQuantum = 128;

 HRTFPanner::HRTFPanner(float sampleRate, HRTFDatabaseLoader* databaseLoader)
     : Panner(PanningModelHRTF)
     , m_databaseLoader(databaseLoader)
     , m_sampleRate(sampleRate)
     , m_crossfadeSelection(CrossfadeSelection1)
     , m_azimuthIndex1(UninitializedAzimuth)
     , m_elevation1(0)
     , m_azimuthIndex2(UninitializedAzimuth)
     , m_elevation2(0)
     , m_crossfadeX(0)
     , m_crossfadeIncr(0)
     , m_convolverL1(fftSizeForSampleRate(sampleRate))
     , m_convolverR1(fftSizeForSampleRate(sampleRate))
     , m_convolverL2(fftSizeForSampleRate(sampleRate))
     , m_convolverR2(fftSizeForSampleRate(sampleRate))
     , m_delayLineL(MaxDelayTimeSeconds, sampleRate)
     , m_delayLineR(MaxDelayTimeSeconds, sampleRate)
     , m_tempL1(RenderingQuantum)
     , m_tempR1(RenderingQuantum)
     , m_tempL2(RenderingQuantum)
     , m_tempR2(RenderingQuantum)
 {
     ASSERT(databaseLoader);
 }

 HRTFPanner::~HRTFPanner()
 {
 }

 size_t HRTFPanner::fftSizeForSampleRate(float sampleRate)
 {
     // The HRTF impulse responses (loaded as audio resources) are 512 sample-frames @44.1KHz.
     // Currently, we truncate the impulse responses to half this size,
     // but an FFT-size of twice impulse response size is needed (for convolution).
     // So for sample rates around 44.1KHz an FFT size of 512 is good.
     // For different sample rates, the truncated response is resampled.
     // The resampled length is used to compute the FFT size by choosing a power of two that is
     // greater than or equal the resampled length. This power of two is doubled to get the actual FFT size.

     ASSERT(AudioUtilities::isValidAudioBufferSampleRate(sampleRate));

     int truncatedImpulseLength = 256;
     double sampleRateRatio = sampleRate / 44100;
     double resampledLength = truncatedImpulseLength * sampleRateRatio;

     return 2 * (1 << static_cast<unsigned>(log2(resampledLength)));
 }

 void HRTFPanner::reset()
 {
     m_convolverL1.reset();
     m_convolverR1.reset();
     m_convolverL2.reset();
     m_convolverR2.reset();
     m_delayLineL.reset();
     m_delayLineR.reset();
 }

 int HRTFPanner::calculateDesiredAzimuthIndexAndBlend(double azimuth, double& azimuthBlend)
 {
     // Convert the azimuth angle from the range -180 -> +180 into the range 0 -> 360.
     // The azimuth index may then be calculated from this positive value.
     if (azimuth < 0)
         azimuth += 360.0;

     HRTFDatabase* database = m_databaseLoader->database();
     ASSERT(database);

     int numberOfAzimuths = database->numberOfAzimuths();
     const double angleBetweenAzimuths = 360.0 / numberOfAzimuths;

     // Calculate the azimuth index and the blend (0 -> 1) for interpolation.
     double desiredAzimuthIndexFloat = azimuth / angleBetweenAzimuths;
     int desiredAzimuthIndex = static_cast<int>(desiredAzimuthIndexFloat);
     azimuthBlend = desiredAzimuthIndexFloat - static_cast<double>(desiredAzimuthIndex);

     // We don't immediately start using this azimuth index, but instead approach this index from the last index we rendered at.
     // This minimizes the clicks and graininess for moving sources which occur otherwise.
     desiredAzimuthIndex = std::max(0, desiredAzimuthIndex);
     desiredAzimuthIndex = std::min(numberOfAzimuths - 1, desiredAzimuthIndex);
     return desiredAzimuthIndex;
 }

 void HRTFPanner::pan(double desiredAzimuth, double elevation, const AudioBus* inputBus, AudioBus* outputBus, size_t framesToProcess)
 {
     unsigned numInputChannels = inputBus ? inputBus->numberOfChannels() : 0;

     bool isInputGood = inputBus &&  numInputChannels >= 1 && numInputChannels <= 2;
     ASSERT(isInputGood);

     bool isOutputGood = outputBus && outputBus->numberOfChannels() == 2 && framesToProcess <= outputBus->length();
     ASSERT(isOutputGood);

     if (!isInputGood || !isOutputGood) {
         if (outputBus)
             outputBus->zero();
         return;
     }

     HRTFDatabase* database = m_databaseLoader->database();
     ASSERT(database);
     if (!database) {
         outputBus->zero();
         return;
     }

     // IRCAM HRTF azimuths values from the loaded database is reversed from the panner's notion of azimuth.
     double azimuth = -desiredAzimuth;

     bool isAzimuthGood = azimuth >= -180.0 && azimuth <= 180.0;
     ASSERT(isAzimuthGood);
     if (!isAzimuthGood) {
         outputBus->zero();
         return;
     }

     // Normally, we'll just be dealing with mono sources.
     // If we have a stereo input, implement stereo panning with left source processed by left HRTF, and right source by right HRTF.
     const AudioChannel* inputChannelL = inputBus->channelByType(AudioBus::ChannelLeft);
     const AudioChannel* inputChannelR = numInputChannels > 1 ? inputBus->channelByType(AudioBus::ChannelRight) : 0;

     // Get source and destination pointers.
     const float* sourceL = inputChannelL->data();
     const float* sourceR = numInputChannels > 1 ? inputChannelR->data() : sourceL;
     float* destinationL = outputBus->channelByType(AudioBus::ChannelLeft)->mutableData();
     float* destinationR = outputBus->channelByType(AudioBus::ChannelRight)->mutableData();

     double azimuthBlend;
     int desiredAzimuthIndex = calculateDesiredAzimuthIndexAndBlend(azimuth, azimuthBlend);

     // Initially snap azimuth and elevation values to first values encountered.
     if (m_azimuthIndex1 == UninitializedAzimuth) {
         m_azimuthIndex1 = desiredAzimuthIndex;
         m_elevation1 = elevation;
     }
     if (m_azimuthIndex2 == UninitializedAzimuth) {
         m_azimuthIndex2 = desiredAzimuthIndex;
         m_elevation2 = elevation;
     }

     // Cross-fade / transition over a period of around 45 milliseconds.
     // This is an empirical value tuned to be a reasonable trade-off between
     // smoothness and speed.
     const double fadeFrames = sampleRate() <= 48000 ? 2048 : 4096;

     // Check for azimuth and elevation changes, initiating a cross-fade if needed.
     if (!m_crossfadeX && m_crossfadeSelection == CrossfadeSelection1) {
         if (desiredAzimuthIndex != m_azimuthIndex1 || elevation != m_elevation1) {
             // Cross-fade from 1 -> 2
             m_crossfadeIncr = 1 / fadeFrames;
             m_azimuthIndex2 = desiredAzimuthIndex;
             m_elevation2 = elevation;
         }
     }
     if (m_crossfadeX == 1 && m_crossfadeSelection == CrossfadeSelection2) {
         if (desiredAzimuthIndex != m_azimuthIndex2 || elevation != m_elevation2) {
             // Cross-fade from 2 -> 1
             m_crossfadeIncr = -1 / fadeFrames;
             m_azimuthIndex1 = desiredAzimuthIndex;
             m_elevation1 = elevation;
         }
     }

     // This algorithm currently requires that we process in power-of-two size chunks at least RenderingQuantum.
     ASSERT(1UL << static_cast<int>(log2(framesToProcess)) == framesToProcess);
     ASSERT(framesToProcess >= RenderingQuantum);

     const unsigned framesPerSegment = RenderingQuantum;
     const unsigned numberOfSegments = framesToProcess / framesPerSegment;

     for (unsigned segment = 0; segment < numberOfSegments; ++segment) {
         // Get the HRTFKernels and interpolated delays.
         HRTFKernel* kernelL1;
         HRTFKernel* kernelR1;
         HRTFKernel* kernelL2;
         HRTFKernel* kernelR2;
         double frameDelayL1;
         double frameDelayR1;
         double frameDelayL2;
         double frameDelayR2;
         database->getKernelsFromAzimuthElevation(azimuthBlend, m_azimuthIndex1, m_elevation1, kernelL1, kernelR1, frameDelayL1, frameDelayR1);
         database->getKernelsFromAzimuthElevation(azimuthBlend, m_azimuthIndex2, m_elevation2, kernelL2, kernelR2, frameDelayL2, frameDelayR2);

         bool areKernelsGood = kernelL1 && kernelR1 && kernelL2 && kernelR2;
         ASSERT(areKernelsGood);
         if (!areKernelsGood) {
             outputBus->zero();
             return;
         }

         ASSERT(frameDelayL1 / sampleRate() < MaxDelayTimeSeconds && frameDelayR1 / sampleRate() < MaxDelayTimeSeconds);
         ASSERT(frameDelayL2 / sampleRate() < MaxDelayTimeSeconds && frameDelayR2 / sampleRate() < MaxDelayTimeSeconds);

         // Crossfade inter-aural delays based on transitions.
         double frameDelayL = (1 - m_crossfadeX) * frameDelayL1 + m_crossfadeX * frameDelayL2;
         double frameDelayR = (1 - m_crossfadeX) * frameDelayR1 + m_crossfadeX * frameDelayR2;

         // Calculate the source and destination pointers for the current segment.
         unsigned offset = segment * framesPerSegment;
         const float* segmentSourceL = sourceL + offset;
         const float* segmentSourceR = sourceR + offset;
         float* segmentDestinationL = destinationL + offset;
         float* segmentDestinationR = destinationR + offset;

         // First run through delay lines for inter-aural time difference.
         m_delayLineL.setDelayFrames(frameDelayL);
         m_delayLineR.setDelayFrames(frameDelayR);
         m_delayLineL.process(segmentSourceL, segmentDestinationL, framesPerSegment);
         m_delayLineR.process(segmentSourceR, segmentDestinationR, framesPerSegment);

         bool needsCrossfading = m_crossfadeIncr;

         // Have the convolvers render directly to the final destination if we're not cross-fading.
         float* convolutionDestinationL1 = needsCrossfading ? m_tempL1.data() : segmentDestinationL;
         float* convolutionDestinationR1 = needsCrossfading ? m_tempR1.data() : segmentDestinationR;
         float* convolutionDestinationL2 = needsCrossfading ? m_tempL2.data() : segmentDestinationL;
         float* convolutionDestinationR2 = needsCrossfading ? m_tempR2.data() : segmentDestinationR;

         // Now do the convolutions.
         // Note that we avoid doing convolutions on both sets of convolvers if we're not currently cross-fading.

         if (m_crossfadeSelection == CrossfadeSelection1 || needsCrossfading) {
             m_convolverL1.process(kernelL1->fftFrame(), segmentDestinationL, convolutionDestinationL1, framesPerSegment);
             m_convolverR1.process(kernelR1->fftFrame(), segmentDestinationR, convolutionDestinationR1, framesPerSegment);
         }

         if (m_crossfadeSelection == CrossfadeSelection2 || needsCrossfading) {
             m_convolverL2.process(kernelL2->fftFrame(), segmentDestinationL, convolutionDestinationL2, framesPerSegment);
             m_convolverR2.process(kernelR2->fftFrame(), segmentDestinationR, convolutionDestinationR2, framesPerSegment);
         }

         if (needsCrossfading) {
             // Apply linear cross-fade.
             float x = m_crossfadeX;
             float incr = m_crossfadeIncr;
             for (unsigned i = 0; i < framesPerSegment; ++i) {
                 segmentDestinationL[i] = (1 - x) * convolutionDestinationL1[i] + x * convolutionDestinationL2[i];
                 segmentDestinationR[i] = (1 - x) * convolutionDestinationR1[i] + x * convolutionDestinationR2[i];
                 x += incr;
             }
             // Update cross-fade value from local.
             m_crossfadeX = x;

             if (m_crossfadeIncr > 0 && fabs(m_crossfadeX - 1) < m_crossfadeIncr) {
                 // We've fully made the crossfade transition from 1 -> 2.
                 m_crossfadeSelection = CrossfadeSelection2;
                 m_crossfadeX = 1;
                 m_crossfadeIncr = 0;
             } else if (m_crossfadeIncr < 0 && fabs(m_crossfadeX) < -m_crossfadeIncr) {
                 // We've fully made the crossfade transition from 2 -> 1.
                 m_crossfadeSelection = CrossfadeSelection1;
                 m_crossfadeX = 0;
                 m_crossfadeIncr = 0;
             }
         }
     }
 }

 double HRTFPanner::tailTime() const
 {
     // Because HRTFPanner is implemented with a DelayKernel and a FFTConvolver, the tailTime of the HRTFPanner
     // is the sum of the tailTime of the DelayKernel and the tailTime of the FFTConvolver, which is MaxDelayTimeSeconds
     // and fftSize() / 2, respectively.
     return MaxDelayTimeSeconds + (fftSize() / 2) / static_cast<double>(sampleRate());
 }

 double HRTFPanner::latencyTime() const
 {
     // The latency of a FFTConvolver is also fftSize() / 2, and is in addition to its tailTime of the
     // same value.
     return (fftSize() / 2) / static_cast<double>(sampleRate());
 }

 void HRTFPanner::trace(Visitor* visitor)
 {
     visitor->trace(m_databaseLoader);
     Panner::trace(visitor);
 }

 } // namespace blink

 #endif // ENABLE(WEB_AUDIO)
	/*
	* Copyright (C) 2010, Google Inc. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	*
	* THIS SOFTWARE IS PROVIDED BY APPLE INC. AND ITS CONTRIBUTORS ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL APPLE INC. OR ITS CONTRIBUTORS BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
	* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include "config.h"

	#if ENABLE(WEB_AUDIO)

	#include "platform/audio/HRTFPanner.h"

	#include <algorithm>
	#include "platform/audio/AudioBus.h"
	#include "platform/audio/AudioUtilities.h"
	#include "platform/audio/HRTFDatabase.h"
	#include "wtf/MathExtras.h"
	#include "wtf/RefPtr.h"

	namespace blink {

	// The value of 2 milliseconds is larger than the largest delay which exists in any HRTFKernel from the default HRTFDatabase (0.0136 seconds).
	// We ASSERT the delay values used in process() with this value.
	const double MaxDelayTimeSeconds = 0.002;

	const int UninitializedAzimuth = -1;
	const unsigned RenderingQuantum = 128;

	HRTFPanner::HRTFPanner(float sampleRate, HRTFDatabaseLoader* databaseLoader)
	: Panner(PanningModelHRTF)
	, m_databaseLoader(databaseLoader)
	, m_sampleRate(sampleRate)
	, m_crossfadeSelection(CrossfadeSelection1)
	, m_azimuthIndex1(UninitializedAzimuth)
	, m_elevation1(0)
	, m_azimuthIndex2(UninitializedAzimuth)
	, m_elevation2(0)
	, m_crossfadeX(0)
	, m_crossfadeIncr(0)
	, m_convolverL1(fftSizeForSampleRate(sampleRate))
	, m_convolverR1(fftSizeForSampleRate(sampleRate))
	, m_convolverL2(fftSizeForSampleRate(sampleRate))
	, m_convolverR2(fftSizeForSampleRate(sampleRate))
	, m_delayLineL(MaxDelayTimeSeconds, sampleRate)
	, m_delayLineR(MaxDelayTimeSeconds, sampleRate)
	, m_tempL1(RenderingQuantum)
	, m_tempR1(RenderingQuantum)
	, m_tempL2(RenderingQuantum)
	, m_tempR2(RenderingQuantum)
	{
	ASSERT(databaseLoader);
	}

	HRTFPanner::~HRTFPanner()
	{
	}

	size_t HRTFPanner::fftSizeForSampleRate(float sampleRate)
	{
	// The HRTF impulse responses (loaded as audio resources) are 512 sample-frames @44.1KHz.
	// Currently, we truncate the impulse responses to half this size,
	// but an FFT-size of twice impulse response size is needed (for convolution).
	// So for sample rates around 44.1KHz an FFT size of 512 is good.
	// For different sample rates, the truncated response is resampled.
	// The resampled length is used to compute the FFT size by choosing a power of two that is
	// greater than or equal the resampled length. This power of two is doubled to get the actual FFT size.

	ASSERT(AudioUtilities::isValidAudioBufferSampleRate(sampleRate));

	int truncatedImpulseLength = 256;
	double sampleRateRatio = sampleRate / 44100;
	double resampledLength = truncatedImpulseLength * sampleRateRatio;

	return 2 * (1 << static_cast<unsigned>(log2(resampledLength)));
	}

	void HRTFPanner::reset()
	{
	m_convolverL1.reset();
	m_convolverR1.reset();
	m_convolverL2.reset();
	m_convolverR2.reset();
	m_delayLineL.reset();
	m_delayLineR.reset();
	}

	int HRTFPanner::calculateDesiredAzimuthIndexAndBlend(double azimuth, double& azimuthBlend)
	{
	// Convert the azimuth angle from the range -180 -> +180 into the range 0 -> 360.
	// The azimuth index may then be calculated from this positive value.
	if (azimuth < 0)
	azimuth += 360.0;

	HRTFDatabase* database = m_databaseLoader->database();
	ASSERT(database);

	int numberOfAzimuths = database->numberOfAzimuths();
	const double angleBetweenAzimuths = 360.0 / numberOfAzimuths;

	// Calculate the azimuth index and the blend (0 -> 1) for interpolation.
	double desiredAzimuthIndexFloat = azimuth / angleBetweenAzimuths;
	int desiredAzimuthIndex = static_cast<int>(desiredAzimuthIndexFloat);
	azimuthBlend = desiredAzimuthIndexFloat - static_cast<double>(desiredAzimuthIndex);

	// We don't immediately start using this azimuth index, but instead approach this index from the last index we rendered at.
	// This minimizes the clicks and graininess for moving sources which occur otherwise.
	desiredAzimuthIndex = std::max(0, desiredAzimuthIndex);
	desiredAzimuthIndex = std::min(numberOfAzimuths - 1, desiredAzimuthIndex);
	return desiredAzimuthIndex;
	}

	void HRTFPanner::pan(double desiredAzimuth, double elevation, const AudioBus* inputBus, AudioBus* outputBus, size_t framesToProcess)
	{
	unsigned numInputChannels = inputBus ? inputBus->numberOfChannels() : 0;

	bool isInputGood = inputBus && numInputChannels >= 1 && numInputChannels <= 2;
	ASSERT(isInputGood);

	bool isOutputGood = outputBus && outputBus->numberOfChannels() == 2 && framesToProcess <= outputBus->length();
	ASSERT(isOutputGood);

	if (!isInputGood \|\| !isOutputGood) {
	if (outputBus)
	outputBus->zero();
	return;
	}

	HRTFDatabase* database = m_databaseLoader->database();
	ASSERT(database);
	if (!database) {
	outputBus->zero();
	return;
	}

	// IRCAM HRTF azimuths values from the loaded database is reversed from the panner's notion of azimuth.
	double azimuth = -desiredAzimuth;

	bool isAzimuthGood = azimuth >= -180.0 && azimuth <= 180.0;
	ASSERT(isAzimuthGood);
	if (!isAzimuthGood) {
	outputBus->zero();
	return;
	}

	// Normally, we'll just be dealing with mono sources.
	// If we have a stereo input, implement stereo panning with left source processed by left HRTF, and right source by right HRTF.
	const AudioChannel* inputChannelL = inputBus->channelByType(AudioBus::ChannelLeft);
	const AudioChannel* inputChannelR = numInputChannels > 1 ? inputBus->channelByType(AudioBus::ChannelRight) : 0;

	// Get source and destination pointers.
	const float* sourceL = inputChannelL->data();
	const float* sourceR = numInputChannels > 1 ? inputChannelR->data() : sourceL;
	float* destinationL = outputBus->channelByType(AudioBus::ChannelLeft)->mutableData();
	float* destinationR = outputBus->channelByType(AudioBus::ChannelRight)->mutableData();

	double azimuthBlend;
	int desiredAzimuthIndex = calculateDesiredAzimuthIndexAndBlend(azimuth, azimuthBlend);

	// Initially snap azimuth and elevation values to first values encountered.
	if (m_azimuthIndex1 == UninitializedAzimuth) {
	m_azimuthIndex1 = desiredAzimuthIndex;
	m_elevation1 = elevation;
	}
	if (m_azimuthIndex2 == UninitializedAzimuth) {
	m_azimuthIndex2 = desiredAzimuthIndex;
	m_elevation2 = elevation;
	}

	// Cross-fade / transition over a period of around 45 milliseconds.
	// This is an empirical value tuned to be a reasonable trade-off between
	// smoothness and speed.
	const double fadeFrames = sampleRate() <= 48000 ? 2048 : 4096;

	// Check for azimuth and elevation changes, initiating a cross-fade if needed.
	if (!m_crossfadeX && m_crossfadeSelection == CrossfadeSelection1) {
	if (desiredAzimuthIndex != m_azimuthIndex1 \|\| elevation != m_elevation1) {
	// Cross-fade from 1 -> 2
	m_crossfadeIncr = 1 / fadeFrames;
	m_azimuthIndex2 = desiredAzimuthIndex;
	m_elevation2 = elevation;
	}
	}
	if (m_crossfadeX == 1 && m_crossfadeSelection == CrossfadeSelection2) {
	if (desiredAzimuthIndex != m_azimuthIndex2 \|\| elevation != m_elevation2) {
	// Cross-fade from 2 -> 1
	m_crossfadeIncr = -1 / fadeFrames;
	m_azimuthIndex1 = desiredAzimuthIndex;
	m_elevation1 = elevation;
	}
	}

	// This algorithm currently requires that we process in power-of-two size chunks at least RenderingQuantum.
	ASSERT(1UL << static_cast<int>(log2(framesToProcess)) == framesToProcess);
	ASSERT(framesToProcess >= RenderingQuantum);

	const unsigned framesPerSegment = RenderingQuantum;
	const unsigned numberOfSegments = framesToProcess / framesPerSegment;

	for (unsigned segment = 0; segment < numberOfSegments; ++segment) {
	// Get the HRTFKernels and interpolated delays.
	HRTFKernel* kernelL1;
	HRTFKernel* kernelR1;
	HRTFKernel* kernelL2;
	HRTFKernel* kernelR2;
	double frameDelayL1;
	double frameDelayR1;
	double frameDelayL2;
	double frameDelayR2;
	database->getKernelsFromAzimuthElevation(azimuthBlend, m_azimuthIndex1, m_elevation1, kernelL1, kernelR1, frameDelayL1, frameDelayR1);
	database->getKernelsFromAzimuthElevation(azimuthBlend, m_azimuthIndex2, m_elevation2, kernelL2, kernelR2, frameDelayL2, frameDelayR2);

	bool areKernelsGood = kernelL1 && kernelR1 && kernelL2 && kernelR2;
	ASSERT(areKernelsGood);
	if (!areKernelsGood) {
	outputBus->zero();
	return;
	}

	ASSERT(frameDelayL1 / sampleRate() < MaxDelayTimeSeconds && frameDelayR1 / sampleRate() < MaxDelayTimeSeconds);
	ASSERT(frameDelayL2 / sampleRate() < MaxDelayTimeSeconds && frameDelayR2 / sampleRate() < MaxDelayTimeSeconds);

	// Crossfade inter-aural delays based on transitions.
	double frameDelayL = (1 - m_crossfadeX) * frameDelayL1 + m_crossfadeX * frameDelayL2;
	double frameDelayR = (1 - m_crossfadeX) * frameDelayR1 + m_crossfadeX * frameDelayR2;

	// Calculate the source and destination pointers for the current segment.
	unsigned offset = segment * framesPerSegment;
	const float* segmentSourceL = sourceL + offset;
	const float* segmentSourceR = sourceR + offset;
	float* segmentDestinationL = destinationL + offset;
	float* segmentDestinationR = destinationR + offset;

	// First run through delay lines for inter-aural time difference.
	m_delayLineL.setDelayFrames(frameDelayL);
	m_delayLineR.setDelayFrames(frameDelayR);
	m_delayLineL.process(segmentSourceL, segmentDestinationL, framesPerSegment);
	m_delayLineR.process(segmentSourceR, segmentDestinationR, framesPerSegment);

	bool needsCrossfading = m_crossfadeIncr;

	// Have the convolvers render directly to the final destination if we're not cross-fading.
	float* convolutionDestinationL1 = needsCrossfading ? m_tempL1.data() : segmentDestinationL;
	float* convolutionDestinationR1 = needsCrossfading ? m_tempR1.data() : segmentDestinationR;
	float* convolutionDestinationL2 = needsCrossfading ? m_tempL2.data() : segmentDestinationL;
	float* convolutionDestinationR2 = needsCrossfading ? m_tempR2.data() : segmentDestinationR;

	// Now do the convolutions.
	// Note that we avoid doing convolutions on both sets of convolvers if we're not currently cross-fading.

	if (m_crossfadeSelection == CrossfadeSelection1 \|\| needsCrossfading) {
	m_convolverL1.process(kernelL1->fftFrame(), segmentDestinationL, convolutionDestinationL1, framesPerSegment);
	m_convolverR1.process(kernelR1->fftFrame(), segmentDestinationR, convolutionDestinationR1, framesPerSegment);
	}

	if (m_crossfadeSelection == CrossfadeSelection2 \|\| needsCrossfading) {
	m_convolverL2.process(kernelL2->fftFrame(), segmentDestinationL, convolutionDestinationL2, framesPerSegment);
	m_convolverR2.process(kernelR2->fftFrame(), segmentDestinationR, convolutionDestinationR2, framesPerSegment);
	}

	if (needsCrossfading) {
	// Apply linear cross-fade.
	float x = m_crossfadeX;
	float incr = m_crossfadeIncr;
	for (unsigned i = 0; i < framesPerSegment; ++i) {
	segmentDestinationL[i] = (1 - x) * convolutionDestinationL1[i] + x * convolutionDestinationL2[i];
	segmentDestinationR[i] = (1 - x) * convolutionDestinationR1[i] + x * convolutionDestinationR2[i];
	x += incr;
	}
	// Update cross-fade value from local.
	m_crossfadeX = x;

	if (m_crossfadeIncr > 0 && fabs(m_crossfadeX - 1) < m_crossfadeIncr) {
	// We've fully made the crossfade transition from 1 -> 2.
	m_crossfadeSelection = CrossfadeSelection2;
	m_crossfadeX = 1;
	m_crossfadeIncr = 0;
	} else if (m_crossfadeIncr < 0 && fabs(m_crossfadeX) < -m_crossfadeIncr) {
	// We've fully made the crossfade transition from 2 -> 1.
	m_crossfadeSelection = CrossfadeSelection1;
	m_crossfadeX = 0;
	m_crossfadeIncr = 0;
	}
	}
	}
	}

	double HRTFPanner::tailTime() const
	{
	// Because HRTFPanner is implemented with a DelayKernel and a FFTConvolver, the tailTime of the HRTFPanner
	// is the sum of the tailTime of the DelayKernel and the tailTime of the FFTConvolver, which is MaxDelayTimeSeconds
	// and fftSize() / 2, respectively.
	return MaxDelayTimeSeconds + (fftSize() / 2) / static_cast<double>(sampleRate());
	}

	double HRTFPanner::latencyTime() const
	{
	// The latency of a FFTConvolver is also fftSize() / 2, and is in addition to its tailTime of the
	// same value.
	return (fftSize() / 2) / static_cast<double>(sampleRate());
	}

	void HRTFPanner::trace(Visitor* visitor)
	{
	visitor->trace(m_databaseLoader);
	Panner::trace(visitor);
	}

	} // namespace blink

	#endif // ENABLE(WEB_AUDIO)