native_client_sdk/doc_generated/devguide/tutorial/tutorial-part2.html

{{+bindTo:partials.standard_nacl_article}}

<section id="c-tutorial-getting-started-part-2">
<span id="tutorial2"></span><h1 id="c-tutorial-getting-started-part-2"><span id="tutorial2"></span>C++ Tutorial: Getting Started (Part 2)</h1>
<div class="contents local" id="contents" style="display: none">
<ul class="small-gap">
<li><a class="reference internal" href="#overview" id="id1">Overview</a></li>
<li><p class="first"><a class="reference internal" href="#using-the-native-client-sdk-build-system" id="id2">Using the Native Client SDK build system</a></p>
<ul class="small-gap">
<li><a class="reference internal" href="#simplifying-the-makefile" id="id3">Simplifying the Makefile</a></li>
<li><a class="reference internal" href="#choosing-valid-toolchains-and-including-common-mk" id="id4">Choosing valid toolchains, and including common.mk</a></li>
<li><a class="reference internal" href="#configuring-your-project" id="id5">Configuring your project</a></li>
<li><a class="reference internal" href="#build-macros" id="id6">Build macros</a></li>
</ul>
</li>
<li><p class="first"><a class="reference internal" href="#making-index-html-work-for-chrome-apps" id="id7">Making index.html work for Chrome Apps</a></p>
<ul class="small-gap">
<li><a class="reference internal" href="#csp-rules" id="id8">CSP rules</a></li>
<li><a class="reference internal" href="#making-index-html-csp-compliant" id="id9">Making index.html CSP-compliant</a></li>
<li><a class="reference internal" href="#making-index-html-support-different-toolchains-and-configurations" id="id10">Making index.html support different toolchains and configurations</a></li>
</ul>
</li>
<li><p class="first"><a class="reference internal" href="#sharing-common-code-with-common-js" id="id11">Sharing common code with common.js</a></p>
<ul class="small-gap">
<li><a class="reference internal" href="#loading-the-page-and-creating-the-module" id="id12">Loading the page and creating the module</a></li>
</ul>
</li>
<li><a class="reference internal" href="#example-specific-behavior-with-example-js" id="id13">Example-specific behavior with example.js</a></li>
</ul>

</div><section id="overview">
<h2 id="overview">Overview</h2>
<p>This tutorial shows how to convert the finished PNaCl web application from
<a class="reference internal" href="/native-client/devguide/tutorial/tutorial-part1.html"><em>Part 1</em></a> to use the Native Client SDK build system and
common JavaScript files. It also demonstrates some techniques to make your web
application <a class="reference external" href="/apps/contentSecurityPolicy">Content Security Policy (CSP)-compliant</a>, which is necessary for <a class="reference external" href="/apps/about_apps">Chrome Apps</a>.</p>
<p>Using the Native Client SDK build system makes it easy to build with all of the
SDK toolchains, and switch between the Debug and Release configurations. It
also simplifies the makefiles for your project, as we&#8217;ll see in the next
section. Finally, it adds some useful commands for <a class="reference internal" href="/native-client/sdk/examples.html#id1"><em>running</em></a> and <a class="reference internal" href="/native-client/sdk/examples.html#debugging-the-sdk-examples"><em>debugging</em></a>
your application.</p>
<p>The finished code for this example can be found in the
<code>pepper_$(VERSION)/getting_started/part2</code> directory in the Native Client SDK
download.</p>
</section><section id="using-the-native-client-sdk-build-system">
<h2 id="using-the-native-client-sdk-build-system">Using the Native Client SDK build system</h2>
<p>This section describes how to use the SDK build system. To do so, we&#8217;ll make
changes in the makefile. Because the makefile in part1 and part2 are so
different, it is easier to start from scratch. Here is the contents of the new
makefile. The following sections will describe it in more detail.</p>
<section id="simplifying-the-makefile">
<h3 id="simplifying-the-makefile">Simplifying the Makefile</h3>
<p>The makefile from part1 only supports one toolchain (PNaCl) and one
configuration (Release). It also only supports one source file. It&#8217;s relatively
simple, but if we want to add support for multiple toolchains, configurations,
source files, or build steps, it would grow increasingly complex. The SDK build
system uses a set of variables and macros to make this possible, without
significantly increasing the complexity of the makefile.</p>
<p>Here is the new makefile, supporting three toolchains (PNaCl, Newlib NaCl,
Glibc NaCl) and two configurations (Debug, Release).</p>
<pre class="prettyprint">
VALID_TOOLCHAINS := pnacl newlib glibc

NACL_SDK_ROOT ?= $(abspath $(CURDIR)/../..)
include $(NACL_SDK_ROOT)/tools/common.mk

TARGET = part2
LIBS = ppapi_cpp ppapi

CFLAGS = -Wall
SOURCES = hello_tutorial.cc

# Build rules generated by macros from common.mk:

$(foreach src,$(SOURCES),$(eval $(call COMPILE_RULE,$(src),$(CFLAGS))))

# The PNaCl workflow uses both an unstripped and finalized/stripped binary.
# On NaCl, only produce a stripped binary for Release configs (not Debug).
ifneq (,$(or $(findstring pnacl,$(TOOLCHAIN)),$(findstring Release,$(CONFIG))))
$(eval $(call LINK_RULE,$(TARGET)_unstripped,$(SOURCES),$(LIBS),$(DEPS)))
$(eval $(call STRIP_RULE,$(TARGET),$(TARGET)_unstripped))
else
$(eval $(call LINK_RULE,$(TARGET),$(SOURCES),$(LIBS),$(DEPS)))
endif

$(eval $(call NMF_RULE,$(TARGET),))
</pre>
</section><section id="choosing-valid-toolchains-and-including-common-mk">
<h3 id="choosing-valid-toolchains-and-including-common-mk">Choosing valid toolchains, and including common.mk</h3>
<p>The makefile begins by specifying the toolchains that are valid for this
project. The Native Client SDK build system supports multi-toolchain projects
for its examples and libraries, but generally you will choose one toolchain
when you begin your project and never change it. Please see the
<a class="reference internal" href="/native-client/overview.html#toolchains"><em>Toolchains section of the Native Client overview</em></a> for more
information.</p>
<p>For this example, we support the <code>pnacl</code>, <code>newlib</code> and <code>glibc</code> toolchains.</p>
<pre class="prettyprint">
VALID_TOOLCHAINS := pnacl newlib glibc
</pre>
<p>Next, as a convenience, we specify where to find <code>NACL_SDK_ROOT</code>. Because
this example is located in <code>pepper_$(VERSION)/getting_started/part2</code>, the
root of the SDK is two directories up.</p>
<pre class="prettyprint">
NACL_SDK_ROOT ?= $(abspath $(CURDIR)/../..)
</pre>
<aside class="note">
<blockquote>
<div>In your own projects, you can use the absolute path to your installed SDK
here. You can also override this default by setting the <code>NACL_SDK_ROOT</code>
environment variable. See <a class="reference internal" href="/native-client/devguide/tutorial/tutorial-part1.html#tutorial-step-5"><em>Step 5 of Part 1 of this tutorial</em></a> for more details.</div></blockquote>

</aside>
<p>Next, we include the file <code>tools/common.mk</code>. This file provides the
functionality for the Native Client SDK build system, including new build rules
to compile and link a project, which we&#8217;ll use below.</p>
<pre class="prettyprint">
include $(NACL_SDK_ROOT)/tools/common.mk
</pre>
</section><section id="configuring-your-project">
<h3 id="configuring-your-project">Configuring your project</h3>
<p>After including <code>tools/common.mk</code>, we configure the project by specifying its
name, the sources and libraries it uses:</p>
<pre class="prettyprint">
TARGET = part2
LIBS = ppapi_cpp ppapi

CFLAGS = -Wall
SOURCES = hello_tutorial.cc
</pre>
<p>These variable names are not required and not used by the SDK build system;
they are only used in the rules described below. By convention, all SDK
makefiles use the following variables:</p>
<dl class="docutils">
<dt>TARGET</dt>
<dd>The name of the project to build. This variable determines the name of the
library or executable that will be generated. In the above example, we call
the target <code>part2</code>, which will generate an executable called
<code>part2.pexe</code> for PNaCl. For NaCl toolchains, the executable&#8217;s file name
will be given a suffix for its architecture. For example, the ARM executable
is called <code>part2_arm.nexe</code>.</dd>
<dt>LIBS</dt>
<dd>A list of libraries that this executable needs to link against. The library
search path is already set up to only look in the directory for the current
toolchain and architecture. In this example, we link against <code>ppapi_cpp</code>
and <code>ppapi</code>. <code>ppapi_cpp</code> is needed to use the <a class="reference external" href="/native-client/pepper_stable/cpp/">Pepper C++ interface</a>. <code>ppapi</code> is needed for communicating
with the browser.</dd>
<dt>CFLAGS</dt>
<dd>A list of extra flags to pass to the compiler. In this example, we pass
<code>-Wall</code>, which turns on all warnings.</dd>
<dt>LDFLAGS</dt>
<dd>A list of additional flags to pass to the linker. This example does not need
any special linker flags, so this variable is omitted.</dd>
<dt>SOURCES</dt>
<dd>A list of C or C++ sources to compile, separated by spaces. If you have a
long list of sources, it may be easier to read if you put each file on its
own line, and use <code>\</code> as a line-continuation character. Here&#8217;s an example:</dd>
</dl>
<pre class="prettyprint">
SOURCES = foo.cc \
          bar.cc \
          baz.cc \
          quux.cc
</pre>
</section><section id="build-macros">
<h3 id="build-macros">Build macros</h3>
<p>For many projects, the following build macros do not need to be changed; they
will use the variables we&#8217;ve defined above.</p>
<pre class="prettyprint">
$(foreach src,$(SOURCES),$(eval $(call COMPILE_RULE,$(src),$(CFLAGS))))

ifneq (,$(or $(findstring pnacl,$(TOOLCHAIN)),$(findstring Release,$(CONFIG))))
$(eval $(call LINK_RULE,$(TARGET)_unstripped,$(SOURCES),$(LIBS),$(DEPS)))
$(eval $(call STRIP_RULE,$(TARGET),$(TARGET)_unstripped))
else
$(eval $(call LINK_RULE,$(TARGET),$(SOURCES),$(LIBS),$(DEPS)))
endif

$(eval $(call NMF_RULE,$(TARGET),))
</pre>
<p>The first line defines rules to compile each source in <code>SOURCES</code>, using the
flags in <code>CFLAGS</code>:</p>
<pre class="prettyprint">
$(foreach src,$(SOURCES),$(eval $(call COMPILE_RULE,$(src),$(CFLAGS))))
</pre>
<p>The next six lines define rules to link the object files into one or more
executables. When <code>TOOLCHAIN</code> is <code>pnacl</code>, there is only one executable
generated: in the example above, <code>part2.pexe</code>. When using a NaCl toolchain,
there will be three executables generated, one for each architecture: in the
example above, <code>part2_arm.nexe</code>, <code>part2_x86_32.nexe</code> and
<code>part2_x86_64.nexe</code>.</p>
<p>When <code>CONFIG</code> is <code>Release</code>, each executable is also stripped to remove
debug information and reduce the file size. Otherwise, when the <code>TOOLCHAIN</code>
is <code>pnacl</code>, the workflow involves creating an unstripped binary for debugging
and then finalizing it and stripping it for publishing.</p>
<pre class="prettyprint">
ifneq (,$(or $(findstring pnacl,$(TOOLCHAIN)),$(findstring Release,$(CONFIG))))
$(eval $(call LINK_RULE,$(TARGET)_unstripped,$(SOURCES),$(LIBS),$(DEPS)))
$(eval $(call STRIP_RULE,$(TARGET),$(TARGET)_unstripped))
else
$(eval $(call LINK_RULE,$(TARGET),$(SOURCES),$(LIBS),$(DEPS)))
endif
</pre>
<p>Finally, the NMF rule generates a NaCl manifest file (<code>.nmf</code>) that references
each executable generated in the previous step:</p>
<pre class="prettyprint">
$(eval $(call NMF_RULE,$(TARGET),))
</pre>
</section></section><section id="making-index-html-work-for-chrome-apps">
<h2 id="making-index-html-work-for-chrome-apps">Making index.html work for Chrome Apps</h2>
<p>This section describes the changes necessary to make the HTML and JavaScript in
part1 CSP-compliant. This is required if you want to build a <a class="reference external" href="/apps/about_apps">Chrome App</a>, but is not necessary if you want to use PNaCl on the open
web.</p>
<section id="csp-rules">
<h3 id="csp-rules">CSP rules</h3>
<p><a class="reference external" href="/apps/contentSecurityPolicy#what">Chrome Apps CSP</a> restricts you from doing
the following:</p>
<ul class="small-gap">
<li>You can’t use inline scripting in your Chrome App pages. The restriction
bans both <code>&lt;script&gt;</code> blocks and event handlers (<code>&lt;button onclick=&quot;...&quot;&gt;</code>).</li>
<li>You can’t reference any external resources in any of your app files (except
for video and audio resources). You can’t embed external resources in an
iframe.</li>
<li>You can’t use string-to-JavaScript methods like <code>eval()</code> and <code>new
Function()</code>.</li>
</ul>
</section><section id="making-index-html-csp-compliant">
<h3 id="making-index-html-csp-compliant">Making index.html CSP-compliant</h3>
<p>To make our application CSP-compliant, we have to remove inline scripting. As
described above, we can&#8217;t use inline <code>&lt;script&gt;</code> blocks or event handlers. This
is easy to do&#8212;we&#8217;ll just reference some new files from our script tag, and
remove all of our inlined scripts:</p>
<pre class="prettyprint">
&lt;head&gt;
  ...
  &lt;script type=&quot;text/javascript&quot; src=&quot;common.js&quot;&gt;&lt;/script&gt;
  &lt;script type=&quot;text/javascript&quot; src=&quot;example.js&quot;&gt;&lt;/script&gt;
&lt;/head&gt;
</pre>
<p><code>common.js</code> has shared code used by all SDK examples, and is described
later in this document. <code>example.js</code> is a script that has code specific to
this example.</p>
<p>We also need to remove the inline event handler on the body tag:</p>
<pre class="prettyprint">
&lt;body onload=&quot;pageDidLoad()&quot;&gt;
...
</pre>
<p>This logic is now handled by <code>common.js</code>.</p>
</section><section id="making-index-html-support-different-toolchains-and-configurations">
<h3 id="making-index-html-support-different-toolchains-and-configurations">Making index.html support different toolchains and configurations</h3>
<p>Finally, there are a few changes to <code>index.html</code> that are not necessary for
CSP-compliance, but help make the SDK examples more generic.</p>
<p>First, we add some <a class="reference external" href="https://developer.mozilla.org/en-US/docs/Web/Guide/HTML/Using_data_attributes">data attributes</a>
to the body element to specify the name, supported toolchains, supported
configurations, and path to the <code>.nmf</code> file:</p>
<pre class="prettyprint">
&lt;body data-name=&quot;part2&quot;
    data-tools=&quot;newlib glibc pnacl&quot;
    data-configs=&quot;Debug Release&quot;
    data-path=&quot;{tc}/{config}&quot;&gt;
...
</pre>
<p><code>common.js</code> will read these data attributes to allow you to load the same
example with different toolchains by changing the URL&#8217;s <a class="reference external" href="http://en.wikipedia.org/wiki/Query_string">query string</a>. For example, you can load the
glibc Debug version of this example by navigating to
<code>index.html?tc=glibc&amp;config=Debug</code>.</p>
<p>Next, we remove the <code>embed</code> element that is described in HTML. This will be
automatically added for us by <code>common.js</code>, based on the current
toolchain/configuration combination:</p>
<pre class="prettyprint">
&lt;!--
Just as in part1, the &lt;embed&gt; element will be wrapped inside the &lt;div&gt;
element with the id &quot;listener&quot;. In part1, the embed was specified in HTML,
here the common.js module creates a new &lt;embed&gt; element and adds it to the
&lt;div&gt; for us.
--&gt;
&lt;div id=&quot;listener&quot;&gt;&lt;/div&gt;
</pre>
</section></section><section id="sharing-common-code-with-common-js">
<h2 id="sharing-common-code-with-common-js">Sharing common code with common.js</h2>
<p><code>common.js</code> contains JavaScript code that each example uses to create a
NaCl module, handle messages from that module and other common tasks like
displaying the module load status and logging messages. Explaining all of
<code>common.js</code> is outside the scope of this document, but please look at the
documentation in that file for more information.</p>
<section id="loading-the-page-and-creating-the-module">
<h3 id="loading-the-page-and-creating-the-module">Loading the page and creating the module</h3>
<p>Since we&#8217;ve added <code>&lt;script&gt;</code> tags for <code>common.js</code> and <code>example.js</code> to the
<code>head</code> element, they will be loaded and executed before the rest of the
document has been parsed. As a result, we have to wait for the page to finish
loading before we try to create the embed element and add it to the page.</p>
<p>We can do that by calling <code>addEventListener</code> and listening for the
<code>DOMContentLoaded</code> event:</p>
<pre class="prettyprint">
// Listen for the DOM content to be loaded. This event is fired when parsing of
// the page's document has finished.
document.addEventListener('DOMContentLoaded', function() {
  ...
});
</pre>
<p>Inside this function, we parse the URL query string, and compare that to the
data attributes:</p>
<pre class="prettyprint">
// From https://developer.mozilla.org/en-US/docs/DOM/window.location
var searchVars = {};
if (window.location.search.length &gt; 1) {
  var pairs = window.location.search.substr(1).split('&amp;');
  for (var key_ix = 0; key_ix &lt; pairs.length; key_ix++) {
    var keyValue = pairs[key_ix].split('=');
    searchVars[unescape(keyValue[0])] =
        keyValue.length &gt; 1 ? unescape(keyValue[1]) : '';
  }
}

...

var toolchains = body.dataset.tools.split(' ');
var configs = body.dataset.configs.split(' ');

...

var tc = toolchains.indexOf(searchVars.tc) !== -1 ?
    searchVars.tc : toolchains[0];

// If the config value is included in the search vars, use that.
// Otherwise default to Release if it is valid, or the first value if
// Release is not valid.
if (configs.indexOf(searchVars.config) !== -1)
  var config = searchVars.config;
else if (configs.indexOf('Release') !== -1)
  var config = 'Release';
else
  var config = configs[0];
</pre>
<p>Then <code>domContentLoaded</code> is called, which performs some checks to see if the
browser supports Native Client, then creates the NaCl module.</p>
<pre class="prettyprint">
function domContentLoaded(name, tool, path, width, height, attrs) {
  updateStatus('Page loaded.');
  if (!browserSupportsNaCl(tool)) {
    updateStatus(
        'Browser does not support NaCl (' + tool + '), or NaCl is disabled');
  } else if (common.naclModule == null) {
    updateStatus('Creating embed: ' + tool);

    // We use a non-zero sized embed to give Chrome space to place the bad
    // plug-in graphic, if there is a problem.
    width = typeof width !== 'undefined' ? width : 200;
    height = typeof height !== 'undefined' ? height : 200;
    attachDefaultListeners();
    createNaClModule(name, tool, path, width, height, attrs);
  } else {
    // It's possible that the Native Client module onload event fired
    // before the page's onload event.  In this case, the status message
    // will reflect 'SUCCESS', but won't be displayed.  This call will
    // display the current message.
    updateStatus('Waiting.');
  }
}
</pre>
<p><code>attachDefaultListeners</code> is added before the creation of the module, to make
sure that no messages are lost. Note that <code>window.attachListeners</code> is also
called; this is the way that <code>common.js</code> allows each example to configure
itself differently. If an example defines the <code>attachListeners</code> function, it
will be called by <code>common.js</code>.</p>
<pre class="prettyprint">
function attachDefaultListeners() {
  var listenerDiv = document.getElementById('listener');
  listenerDiv.addEventListener('load', moduleDidLoad, true);
  listenerDiv.addEventListener('message', handleMessage, true);
  listenerDiv.addEventListener('crash', handleCrash, true);
  if (typeof window.attachListeners !== 'undefined') {
    window.attachListeners();
  }
}
</pre>
<p>Finally, <code>createNaClModule</code> actually creates the <code>embed</code>, and appends it as
a child of the element with id <code>listener</code>:</p>
<pre class="prettyprint">
function createNaClModule(name, tool, path, width, height, attrs) {
  var moduleEl = document.createElement('embed');
  moduleEl.setAttribute('name', 'nacl_module');
  moduleEl.setAttribute('id', 'nacl_module');
  moduleEl.setAttribute('width', width);
  moduleEl.setAttribute('height', height);
  moduleEl.setAttribute('path', path);
  moduleEl.setAttribute('src', path + '/' + name + '.nmf');

  ...

  var mimetype = mimeTypeForTool(tool);
  moduleEl.setAttribute('type', mimetype);

  var listenerDiv = document.getElementById('listener');
  listenerDiv.appendChild(moduleEl);
  ...
}
</pre>
<p>When the module finishes loading, it will dispatch a <code>load</code> event, and the
event listener function that was registered above (<code>moduleDidLoad</code>) will be
called. Note that <code>common.js</code> allows each example to define a
<code>window.moduleDidLoad</code> function, that will be called here as well.</p>
<pre class="prettyprint">
function moduleDidLoad() {
  common.naclModule = document.getElementById('nacl_module');
  updateStatus('RUNNING');

  if (typeof window.moduleDidLoad !== 'undefined') {
    window.moduleDidLoad();
  }
}
</pre>
</section></section><section id="example-specific-behavior-with-example-js">
<h2 id="example-specific-behavior-with-example-js">Example-specific behavior with example.js</h2>
<p>As described in the previous section, <code>common.js</code> will call certain functions
during the module loading process. This example only needs to respond to two:
<code>moduleDidLoad</code> and <code>handleMessage</code>.</p>
<pre class="prettyprint">
// This function is called by common.js when the NaCl module is
// loaded.
function moduleDidLoad() {
  // Once we load, hide the plugin. In this example, we don't display anything
  // in the plugin, so it is fine to hide it.
  common.hideModule();

  // After the NaCl module has loaded, common.naclModule is a reference to the
  // NaCl module's &lt;embed&gt; element.
  //
  // postMessage sends a message to it.
  common.naclModule.postMessage('hello');
}

// This function is called by common.js when a message is received from the
// NaCl module.
function handleMessage(message) {
  var logEl = document.getElementById('log');
  logEl.textContent += message.data;
}
</pre>
</section></section>

{{/partials.standard_nacl_article}}