native_client_sdk/doc_generated/devguide/tutorial/tutorial-part1.html

{{+bindTo:partials.standard_nacl_article}}

<section id="c-tutorial-getting-started-part-1">
<span id="tutorial"></span><h1 id="c-tutorial-getting-started-part-1"><span id="tutorial"></span>C++ Tutorial: Getting Started (Part 1)</h1>
<div class="contents local" id="contents" style="display: none">
<ul class="small-gap">
<li><p class="first"><a class="reference internal" href="#overview" id="id1">Overview</a></p>
<ul class="small-gap">
<li><a class="reference internal" href="#what-the-application-in-this-tutorial-does" id="id2">What the application in this tutorial does</a></li>
<li><a class="reference internal" href="#communication-between-javascript-and-native-client-modules" id="id3">Communication between JavaScript and Native Client modules</a></li>
</ul>
</li>
<li><a class="reference internal" href="#step-1-download-and-install-the-native-client-sdk" id="id4">Step 1: Download and install the Native Client SDK</a></li>
<li><a class="reference internal" href="#step-2-start-a-local-server" id="id5">Step 2: Start a local server</a></li>
<li><a class="reference internal" href="#step-3-set-up-the-chrome-browser" id="id6">Step 3: Set up the Chrome browser</a></li>
<li><a class="reference internal" href="#step-4-stub-code-for-the-tutorial" id="id7">Step 4: Stub code for the tutorial</a></li>
<li><a class="reference internal" href="#step-5-compile-the-native-client-module-and-run-the-stub-application" id="id8">Step 5: Compile the Native Client module and run the stub application</a></li>
<li><a class="reference internal" href="#step-6-modify-the-javascript-code-to-send-a-message-to-the-native-client-module" id="id9">Step 6: Modify the JavaScript code to send a message to the Native Client module</a></li>
<li><a class="reference internal" href="#step-7-implement-a-message-handler-in-the-native-client-module" id="id10">Step 7: Implement a message handler in the Native Client module</a></li>
<li><a class="reference internal" href="#step-8-compile-the-native-client-module-and-run-the-application-again" id="id11">Step 8: Compile the Native Client module and run the application again</a></li>
<li><a class="reference internal" href="#troubleshooting" id="id12">Troubleshooting</a></li>
<li><a class="reference internal" href="#next-steps" id="id13">Next steps</a></li>
</ul>

</div><section id="overview">
<h2 id="overview">Overview</h2>
<p>This tutorial shows how to build and run a web application using Portable Native
Client (PNaCl). This is a client-side application that uses HTML, JavaScript and
a Native Client module written in C++. The PNaCl toolchain is used to enable
running the Native Client module directly from a web page.</p>
<p>It&#8217;s recommended to read the <a class="reference internal" href="/native-client/overview.html"><em>Native Client Technical Overview</em></a> prior to going through this tutorial.</p>
<section id="what-the-application-in-this-tutorial-does">
<h3 id="what-the-application-in-this-tutorial-does">What the application in this tutorial does</h3>
<p>The application in this tutorial shows how to load a Native Client module in a
web page, and how to send messages between JavaScript and the C++ code in the
Native Client module. In this simple application, the JavaScript code in the web
page sends a <code>'hello'</code> message to the Native Client module. When the Native
Client module receives a message, it checks whether the message is equal to the
string <code>'hello'</code>. If it is, the Native Client module returns a message saying
<code>'hello from NaCl'</code>. A JavaScript alert panel displays the message received
from the Native Client module.</p>
</section><section id="communication-between-javascript-and-native-client-modules">
<h3 id="communication-between-javascript-and-native-client-modules">Communication between JavaScript and Native Client modules</h3>
<p>The Native Client programming model supports bidirectional communication between
JavaScript and the Native Client module (C/C++ code). Both sides can initiate
and respond to messages. In all cases, the communication is asynchronous: The
caller (JavaScript or the Native Client module) sends a message, but the caller
does not wait for, or may not even expect, a response. This behavior is
analogous to client/server communication on the web, where the client posts a
message to the server and returns immediately. The Native Client messaging
system is part of the Pepper API, and is described in detail in
<a class="reference internal" href="/native-client/devguide/coding/message-system.html"><em>Developer&#8217;s Guide: Messaging System</em></a>.
It is also similar to the way <a class="reference external" href="http://en.wikipedia.org/wiki/Web_worker">web workers</a> interact with the main document in
JavaScript.</p>
</section></section><section id="step-1-download-and-install-the-native-client-sdk">
<h2 id="step-1-download-and-install-the-native-client-sdk">Step 1: Download and install the Native Client SDK</h2>
<p>Follow the instructions on the <a class="reference internal" href="/native-client/sdk/download.html"><em>Download</em></a> page to
download and install the Native Client SDK.</p>
</section><section id="step-2-start-a-local-server">
<span id="tutorial-step-2"></span><h2 id="step-2-start-a-local-server"><span id="tutorial-step-2"></span>Step 2: Start a local server</h2>
<p>To simulate a production environment, the SDK provides a simple web server that
can be used to serve the application on <code>localhost</code>. A convenience Makefile
rule called <code>serve</code> is the easiest way to invoke it:</p>
<pre>
$ cd pepper_$(VERSION)/getting_started
$ make serve
</pre>
<aside class="note">
The SDK may consist of several &#8220;bundles&#8221;, one per Chrome/Pepper version (see
<a class="reference internal" href="/native-client/version.html"><em>versioning information</em></a>). In the sample invocation above
<code>pepper_$(VERSION)</code> refers to the specific version you want to use. For
example, <code>pepper_31</code>. If you don&#8217;t know which version you need, use the
one labeled <code>(stable)</code> by <code>naclsdk list</code>. See <a class="reference internal" href="/native-client/sdk/download.html"><em>Download the Native
Client SDK</em></a> for more details.
</aside>
<p>If no port number is specified, the server defaults to port 5103, and can be
accessed at <a class="reference external" href="http://localhost:5103">http://localhost:5103</a>.</p>
<p>Any server can be used for the purpose of development. The one provided with the
SDK is just a convenience, not a requirement.</p>
</section><section id="step-3-set-up-the-chrome-browser">
<span id="tutorial-step-3"></span><h2 id="step-3-set-up-the-chrome-browser"><span id="tutorial-step-3"></span>Step 3: Set up the Chrome browser</h2>
<p>PNaCl is enabled by default in Chrome version 31 and later. Please make sure
that you have a suitable version to work through this tutorial. It&#8217;s also
important to use a Chrome version that&#8217;s the same or newer than the SDK bundle
used to build the Native Client modules.</p>
<aside class="note">
To find out the version of Chrome, type <code>about:chrome</code> in the address bar.
</aside>
<p>For a better development experience, it&#8217;s also recommended to disable the
Chrome cache. Chrome caches resources aggressively; disabling the cache helps
make sure that the latest version of the Native Client module is loaded during
development.</p>
<ul class="small-gap">
<li>Open Chrome&#8217;s developer tools by clicking the menu icon <img alt="menu-icon" src="/native-client/images/menu-icon.png" /> and
choosing <code>Tools &gt; Developer tools</code>.</li>
<li>Click the gear icon <img alt="gear-icon" src="/native-client/images/gear-icon.png" /> in the bottom right corner of the Chrome
window.</li>
<li>Under the &#8220;General&#8221; settings, check the box next to &#8220;Disable cache (while
DevTools is open)&#8221;.</li>
<li>Keep the Developer Tools pane open while developing Native Client
applications.</li>
</ul>
</section><section id="step-4-stub-code-for-the-tutorial">
<h2 id="step-4-stub-code-for-the-tutorial">Step 4: Stub code for the tutorial</h2>
<p>The stub code for the tutorial is avalable in the SDK, in
<code>pepper_$(VERSION)/getting_started/part1</code>. It contains the following files:</p>
<ul class="small-gap">
<li><p class="first"><code>index.html</code>: Contains the HTML layout of the page as well as the JavaScript
code that interacts with the Native Client module.</p>
<p>The Native Client module is included in the page with an <code>&lt;embed&gt;</code> tag that
points to a manifest file.</p>
</li>
<li><code>hello_tutorial.nmf</code>: A manifest file that&#8217;s used to point the HTML to the
Native Client module and optionally provide additional commands to the PNaCl
translator that is part of the Chrome browser.</li>
<li><code>hello_tutorial.cc</code>: C++ code for a simple Native Client module.</li>
<li><code>Makefile</code>: Compilation commands to build the <strong>pexe</strong> (portable executable)
from the C++ code in <code>hello_tutorial.cc</code>.</li>
</ul>
<p>It&#8217;s a good idea to take a look at these files now&#8212;they contain a large amount
of comments that help explain their structure and contents. For more details
on the structure of a typical Native Client application, see
<a class="reference internal" href="/native-client/devguide/coding/application-structure.html"><em>Application Structure</em></a>.</p>
<p>The stub code is intentionally very minimal. The C++ code does not do anything
except correctly initialize itself. The JavaScript code waits for the Native
Client module to load and changes the status text on the web page accordingly.</p>
</section><section id="step-5-compile-the-native-client-module-and-run-the-stub-application">
<span id="tutorial-step-5"></span><h2 id="step-5-compile-the-native-client-module-and-run-the-stub-application"><span id="tutorial-step-5"></span>Step 5: Compile the Native Client module and run the stub application</h2>
<p>To compile the Native Client module, run <code>make</code>:</p>
<pre>
$ cd pepper_$(VERSION)/getting_started/part1
$ make
</pre>
<p>Since the sample is located within the SDK tree, the Makefile knows how to find
the PNaCl toolchain automatically and use it to build the module. If you&#8217;re
building applications outside the NaCl SDK tree, you should set the
<code>$NACL_SDK_ROOT</code> environment variable. See <a class="reference internal" href="/native-client/devguide/devcycle/building.html"><em>Building Native Client
Modules</em></a> for more details.</p>
<p>Assuming the local server was started according to the instructions in
<a class="reference internal" href="#tutorial-step-2"><em>Step 2</em></a>, you can now load the sample by pointing Chrome
to <a class="reference external" href="http://localhost:5103/part1">http://localhost:5103/part1</a>. Chrome should load the Native Client module
successfully and the Status text should change from &#8220;LOADING...&#8221; to &#8220;SUCCESS&#8221;.
If you run into problems, check out the <a class="reference internal" href="#tutorial-troubleshooting"><em>Troubleshooting section</em></a> below.</p>
</section><section id="step-6-modify-the-javascript-code-to-send-a-message-to-the-native-client-module">
<h2 id="step-6-modify-the-javascript-code-to-send-a-message-to-the-native-client-module">Step 6: Modify the JavaScript code to send a message to the Native Client module</h2>
<p>In this step, you&#8217;ll modify the web page (<code>index.html</code>) to send a message to
the Native Client module after the page loads the module.</p>
<p>Look for the JavaScript function <code>moduleDidLoad()</code>, and add new code to send
a &#8216;hello&#8217; message to the module. The new function should look as follows:</p>
<pre class="prettyprint">
function moduleDidLoad() {
  HelloTutorialModule = document.getElementById('hello_tutorial');
  updateStatus('SUCCESS');
  // Send a message to the Native Client module
  HelloTutorialModule.postMessage('hello');
}
</pre>
</section><section id="step-7-implement-a-message-handler-in-the-native-client-module">
<h2 id="step-7-implement-a-message-handler-in-the-native-client-module">Step 7: Implement a message handler in the Native Client module</h2>
<p>In this step, you&#8217;ll modify the Native Client module (<code>hello_tutorial.cc</code>) to
respond to the message received from the JavaScript code in the application.
Specifically, you&#8217;ll:</p>
<ul class="small-gap">
<li>Implement the <code>HandleMessage()</code> member function of the module instance.</li>
<li>Use the <code>PostMessage()</code> member function to send a message from the module to
the JavaScript code.</li>
</ul>
<p>First, add code to define the variables used by the Native Client module (the
&#8216;hello&#8217; string you&#8217;re expecting to receive from JavaScript and the reply string
you want to return to JavaScript as a response). In the file
<code>hello_tutorial.cc</code>, add this code after the <code>#include</code> statements:</p>
<pre class="prettyprint">
namespace {
// The expected string sent by the browser.
const char* const kHelloString = &quot;hello&quot;;
// The string sent back to the browser upon receipt of a message
// containing &quot;hello&quot;.
const char* const kReplyString = &quot;hello from NaCl&quot;;
} // namespace
</pre>
<p>Now, implement the <code>HandleMessage()</code> member function to check for
<code>kHelloString</code> and return <code>kReplyString.</code> Look for the following line:</p>
<pre class="prettyprint">
// TODO(sdk_user): 1. Make this function handle the incoming message.
</pre>
<p>Populate the member function with code, as follows:</p>
<pre class="prettyprint">
virtual void HandleMessage(const pp::Var&amp; var_message) {
  if (!var_message.is_string())
    return;
  std::string message = var_message.AsString();
  pp::Var var_reply;
  if (message == kHelloString) {
    var_reply = pp::Var(kReplyString);
    PostMessage(var_reply);
  }
}
</pre>
<p>See the Pepper API documentation for additional information about the
<a class="reference external" href="/native-client/pepper_stable/cpp/classpp_1_1_instance.html#a5dce8c8b36b1df7cfcc12e42397a35e8">pp::Instance.HandleMessage</a>
and <a class="reference external" href="/native-client/pepper_stable/cpp/classpp_1_1_instance.html#a67e888a4e4e23effe7a09625e73ecae9">pp::Instance.PostMessage</a>
member functions.</p>
</section><section id="step-8-compile-the-native-client-module-and-run-the-application-again">
<h2 id="step-8-compile-the-native-client-module-and-run-the-application-again">Step 8: Compile the Native Client module and run the application again</h2>
<p>Compile the Native Client module by running the <code>make</code> command again.</p>
<p>Re-run the application by reloading <a class="reference external" href="http://localhost:5103/part1">http://localhost:5103/part1</a> in Chrome.</p>
<p>After Chrome loads the Native Client module, you should see an alert panel
appear with the message sent from the module.</p>
</section><section id="troubleshooting">
<span id="tutorial-troubleshooting"></span><h2 id="troubleshooting"><span id="tutorial-troubleshooting"></span>Troubleshooting</h2>
<p>If your application doesn&#8217;t run, see <a class="reference internal" href="#tutorial-step-3"><em>Step 3</em></a> above to
verify that you&#8217;ve set up your environment correctly, including both the Chrome
browser and the local server. Make sure that you&#8217;re running a correct version of
Chrome, which is also greater or equal than the SDK bundle version you are
using.</p>
<p>Another useful debugging aid is the Chrome JavaScript console (available via the
<code>Tools</code> menu in Chrome). Examine it for clues about what went wrong. For
example, if there&#8217;s a message saying &#8220;NaCl module crashed&#8221;, there is a
possibility that the Native Client module has a bug; <a class="reference internal" href="/native-client/devguide/devcycle/debugging.html"><em>debugging</em></a> may be required.</p>
<p>There&#8217;s more information about troubleshooting in the documentation:</p>
<ul class="small-gap">
<li><a class="reference internal" href="/native-client/faq.html#faq-troubleshooting"><em>FAQ Troubleshooting</em></a>.</li>
<li>The <a class="reference internal" href="/native-client/devguide/coding/progress-events.html"><em>Progress Events</em></a> document
contains some useful information about handling error events.</li>
</ul>
</section><section id="next-steps">
<h2 id="next-steps">Next steps</h2>
<ul class="small-gap">
<li>See the <a class="reference internal" href="/native-client/devguide/coding/application-structure.html"><em>Application Structure</em></a>
chapter in the Developer&#8217;s Guide for information about how to structure a
Native Client module.</li>
<li>Check the <a class="reference external" href="/native-client/pepper_stable/cpp">C++ Reference</a> for details
about how to use the Pepper APIs.</li>
<li>Browse through the source code of the SDK examples (in the <code>examples</code>
directory) to learn additional techniques for writing Native Client
applications and using the Pepper APIs.</li>
<li>See the <a class="reference internal" href="/native-client/devguide/devcycle/building.html"><em>Building</em></a>, <a class="reference internal" href="/native-client/devguide/devcycle/running.html"><em>Running</em></a>, and <a class="reference internal" href="/native-client/devguide/devcycle/debugging.html"><em>Debugging pages</em></a> for information about how to build, run, and
debug Native Client applications.</li>
<li>Check the <a class="reference external" href="http://code.google.com/p/naclports/">naclports</a> project to see
what libraries have been ported for use with Native Client. If you port an
open-source library for your own use, we recommend adding it to naclports
(see <a class="reference external" href="http://code.google.com/p/naclports/wiki/HowTo_Checkin">How to check code into naclports</a>).</li>
</ul>
</section></section>

{{/partials.standard_nacl_article}}