mojo/system/simple_dispatcher_unittest.cc - platform/external/chromium_org - Git at Google

 // Copyright 2013 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.

 // NOTE(vtl): Some of these tests are inherently flaky (e.g., if run on a
 // heavily-loaded system). Sorry. |test::EpsilonTimeout()| may be increased to
 // increase tolerance and reduce observed flakiness (though doing so reduces the
 // meaningfulness of the test).

 #include "mojo/system/simple_dispatcher.h"

 #include "base/basictypes.h"
 #include "base/logging.h"
 #include "base/memory/ref_counted.h"
 #include "base/memory/scoped_vector.h"
 #include "base/synchronization/lock.h"
 #include "base/threading/platform_thread.h"  // For |Sleep()|.
 #include "base/time/time.h"
 #include "mojo/system/test_utils.h"
 #include "mojo/system/waiter.h"
 #include "mojo/system/waiter_test_utils.h"
 #include "testing/gtest/include/gtest/gtest.h"

 namespace mojo {
 namespace system {
 namespace {

 class MockSimpleDispatcher : public SimpleDispatcher {
  public:
   MockSimpleDispatcher()
       : state_(MOJO_HANDLE_SIGNAL_NONE,
                MOJO_HANDLE_SIGNAL_READABLE | MOJO_HANDLE_SIGNAL_WRITABLE) {}

   void SetSatisfiedSignals(MojoHandleSignals new_satisfied_signals) {
     base::AutoLock locker(lock());

     // Any new signals that are set should be satisfiable.
     CHECK_EQ(new_satisfied_signals & ~state_.satisfied_signals,
              new_satisfied_signals & ~state_.satisfied_signals &
                  state_.satisfiable_signals);

     if (new_satisfied_signals == state_.satisfied_signals)
       return;

     state_.satisfied_signals = new_satisfied_signals;
     HandleSignalsStateChangedNoLock();
   }

   void SetSatisfiableSignals(MojoHandleSignals new_satisfiable_signals) {
     base::AutoLock locker(lock());

     // Satisfied implies satisfiable.
     CHECK_EQ(new_satisfiable_signals & state_.satisfied_signals,
              state_.satisfied_signals);

     if (new_satisfiable_signals == state_.satisfiable_signals)
       return;

     state_.satisfiable_signals = new_satisfiable_signals;
     HandleSignalsStateChangedNoLock();
   }

   virtual Type GetType() const OVERRIDE {
     return kTypeUnknown;
   }

  private:
   friend class base::RefCountedThreadSafe<MockSimpleDispatcher>;
   virtual ~MockSimpleDispatcher() {}

   virtual scoped_refptr<Dispatcher>
       CreateEquivalentDispatcherAndCloseImplNoLock() OVERRIDE {
     scoped_refptr<MockSimpleDispatcher> rv(new MockSimpleDispatcher());
     rv->state_ = state_;
     return scoped_refptr<Dispatcher>(rv.get());
   }

   // |SimpleDispatcher| implementation:
   virtual HandleSignalsState GetHandleSignalsStateNoLock() const OVERRIDE {
     lock().AssertAcquired();
     return state_;
   }

   // Protected by |lock()|:
   HandleSignalsState state_;

   DISALLOW_COPY_AND_ASSIGN(MockSimpleDispatcher);
 };

 TEST(SimpleDispatcherTest, Basic) {
   test::Stopwatch stopwatch;

   scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
   Waiter w;
   uint32_t context = 0;

   // Try adding a readable waiter when already readable.
   w.Init();
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
   EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
             d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_READABLE, 0));
   // Shouldn't need to remove the waiter (it was not added).

   // Wait (forever) for writable when already writable.
   w.Init();
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 1));
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_OK, w.Wait(MOJO_DEADLINE_INDEFINITE, &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(1u, context);
   d->RemoveWaiter(&w);

   // Wait for zero time for writable when already writable.
   w.Init();
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 2));
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_OK, w.Wait(0, &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(2u, context);
   d->RemoveWaiter(&w);

   // Wait for non-zero, finite time for writable when already writable.
   w.Init();
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 3));
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_OK,
             w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(3u, context);
   d->RemoveWaiter(&w);

   // Wait for zero time for writable when not writable (will time out).
   w.Init();
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 4));
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, w.Wait(0, NULL));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   d->RemoveWaiter(&w);

   // Wait for non-zero, finite time for writable when not writable (will time
   // out).
   w.Init();
   d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 5));
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED,
             w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), NULL));
   base::TimeDelta elapsed = stopwatch.Elapsed();
   EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
   EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
   d->RemoveWaiter(&w);

   EXPECT_EQ(MOJO_RESULT_OK, d->Close());
 }

 TEST(SimpleDispatcherTest, BasicUnsatisfiable) {
   test::Stopwatch stopwatch;

   scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
   Waiter w;
   uint32_t context = 0;

   // Try adding a writable waiter when it can never be writable.
   w.Init();
   d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
   d->SetSatisfiedSignals(0);
   EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
             d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 1));
   // Shouldn't need to remove the waiter (it was not added).

   // Wait (forever) for writable and then it becomes never writable.
   w.Init();
   d->SetSatisfiableSignals(
       MOJO_HANDLE_SIGNAL_READABLE | MOJO_HANDLE_SIGNAL_WRITABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 2));
   d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
             w.Wait(MOJO_DEADLINE_INDEFINITE, &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(2u, context);
   d->RemoveWaiter(&w);

   // Wait for zero time for writable and then it becomes never writable.
   w.Init();
   d->SetSatisfiableSignals(
       MOJO_HANDLE_SIGNAL_READABLE | MOJO_HANDLE_SIGNAL_WRITABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 3));
   d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, w.Wait(0, &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(3u, context);
   d->RemoveWaiter(&w);

   // Wait for non-zero, finite time for writable and then it becomes never
   // writable.
   w.Init();
   d->SetSatisfiableSignals(
       MOJO_HANDLE_SIGNAL_READABLE | MOJO_HANDLE_SIGNAL_WRITABLE);
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 4));
   d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
             w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(4u, context);
   d->RemoveWaiter(&w);

   EXPECT_EQ(MOJO_RESULT_OK, d->Close());
 }

 TEST(SimpleDispatcherTest, BasicClosed) {
   test::Stopwatch stopwatch;

   scoped_refptr<MockSimpleDispatcher> d;
   Waiter w;
   uint32_t context = 0;

   // Try adding a writable waiter when the dispatcher has been closed.
   d = new MockSimpleDispatcher();
   w.Init();
   EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   EXPECT_EQ(MOJO_RESULT_INVALID_ARGUMENT,
             d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 1));
   // Shouldn't need to remove the waiter (it was not added).

   // Wait (forever) for writable and then the dispatcher is closed.
   d = new MockSimpleDispatcher();
   w.Init();
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 2));
   EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_CANCELLED, w.Wait(MOJO_DEADLINE_INDEFINITE, &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(2u, context);
   // Don't need to remove waiters from closed dispatchers.

   // Wait for zero time for writable and then the dispatcher is closed.
   d = new MockSimpleDispatcher();
   w.Init();
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 3));
   EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_CANCELLED, w.Wait(0, &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(3u, context);
   // Don't need to remove waiters from closed dispatchers.

   // Wait for non-zero, finite time for writable and then the dispatcher is
   // closed.
   d = new MockSimpleDispatcher();
   w.Init();
   EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 4));
   EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   stopwatch.Start();
   EXPECT_EQ(MOJO_RESULT_CANCELLED,
             w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), &context));
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_EQ(4u, context);
   // Don't need to remove waiters from closed dispatchers.
 }

 TEST(SimpleDispatcherTest, BasicThreaded) {
   test::Stopwatch stopwatch;
   bool did_wait;
   MojoResult result;
   uint32_t context;

   // Wait for readable (already readable).
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     {
       d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
       test::WaiterThread thread(d,
                                 MOJO_HANDLE_SIGNAL_READABLE,
                                 MOJO_DEADLINE_INDEFINITE,
                                 1,
                                 &did_wait, &result, &context);
       stopwatch.Start();
       thread.Start();
     }  // Joins the thread.
     // If we closed earlier, then probably we'd get a |MOJO_RESULT_CANCELLED|.
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }
   EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
   EXPECT_FALSE(did_wait);
   EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS, result);

   // Wait for readable and becomes readable after some time.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     test::WaiterThread thread(d,
                               MOJO_HANDLE_SIGNAL_READABLE,
                               MOJO_DEADLINE_INDEFINITE,
                               2,
                               &did_wait, &result, &context);
     stopwatch.Start();
     thread.Start();
     base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
     d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the thread.
   base::TimeDelta elapsed = stopwatch.Elapsed();
   EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
   EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
   EXPECT_TRUE(did_wait);
   EXPECT_EQ(MOJO_RESULT_OK, result);
   EXPECT_EQ(2u, context);

   // Wait for readable and becomes never-readable after some time.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     test::WaiterThread thread(d,
                               MOJO_HANDLE_SIGNAL_READABLE,
                               MOJO_DEADLINE_INDEFINITE,
                               3,
                               &did_wait, &result, &context);
     stopwatch.Start();
     thread.Start();
     base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
     d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_NONE);
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the thread.
   elapsed = stopwatch.Elapsed();
   EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
   EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
   EXPECT_TRUE(did_wait);
   EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, result);
   EXPECT_EQ(3u, context);

   // Wait for readable and dispatcher gets closed.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     test::WaiterThread thread(d,
                               MOJO_HANDLE_SIGNAL_READABLE,
                               MOJO_DEADLINE_INDEFINITE,
                               4,
                               &did_wait, &result, &context);
     stopwatch.Start();
     thread.Start();
     base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the thread.
   elapsed = stopwatch.Elapsed();
   EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
   EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
   EXPECT_TRUE(did_wait);
   EXPECT_EQ(MOJO_RESULT_CANCELLED, result);
   EXPECT_EQ(4u, context);

   // Wait for readable and times out.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     {
       test::WaiterThread thread(d,
                                 MOJO_HANDLE_SIGNAL_READABLE,
                                 2 * test::EpsilonTimeout().InMicroseconds(),
                                 5,
                                 &did_wait, &result, &context);
       stopwatch.Start();
       thread.Start();
       base::PlatformThread::Sleep(1 * test::EpsilonTimeout());
       // Not what we're waiting for.
       d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
     }  // Joins the thread (after its wait times out).
     // If we closed earlier, then probably we'd get a |MOJO_RESULT_CANCELLED|.
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }
   elapsed = stopwatch.Elapsed();
   EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
   EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
   EXPECT_TRUE(did_wait);
   EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, result);
 }

 TEST(SimpleDispatcherTest, MultipleWaiters) {
   static const uint32_t kNumWaiters = 20;

   bool did_wait[kNumWaiters];
   MojoResult result[kNumWaiters];
   uint32_t context[kNumWaiters];

   // All wait for readable and becomes readable after some time.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     ScopedVector<test::WaiterThread> threads;
     for (uint32_t i = 0; i < kNumWaiters; i++) {
       threads.push_back(new test::WaiterThread(d,
                                                MOJO_HANDLE_SIGNAL_READABLE,
                                                MOJO_DEADLINE_INDEFINITE,
                                                i,
                                                &did_wait[i],
                                                &result[i],
                                                &context[i]));
       threads.back()->Start();
     }
     base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
     d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the threads.
   for (uint32_t i = 0; i < kNumWaiters; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_OK, result[i]);
     EXPECT_EQ(i, context[i]);
   }

   // Some wait for readable, some for writable, and becomes readable after some
   // time.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     ScopedVector<test::WaiterThread> threads;
     for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
       threads.push_back(new test::WaiterThread(d,
                                                MOJO_HANDLE_SIGNAL_READABLE,
                                                MOJO_DEADLINE_INDEFINITE,
                                                i,
                                                &did_wait[i],
                                                &result[i],
                                                &context[i]));
       threads.back()->Start();
     }
     for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
       threads.push_back(new test::WaiterThread(d,
                                                MOJO_HANDLE_SIGNAL_WRITABLE,
                                                MOJO_DEADLINE_INDEFINITE,
                                                i,
                                                &did_wait[i],
                                                &result[i],
                                                &context[i]));
       threads.back()->Start();
     }
     base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
     d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
     // This will wake up the ones waiting to write.
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the threads.
   for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_OK, result[i]);
     EXPECT_EQ(i, context[i]);
   }
   for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_CANCELLED, result[i]);
     EXPECT_EQ(i, context[i]);
   }

   // Some wait for readable, some for writable, and becomes readable and
   // never-writable after some time.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     ScopedVector<test::WaiterThread> threads;
     for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
       threads.push_back(new test::WaiterThread(d,
                                                MOJO_HANDLE_SIGNAL_READABLE,
                                                MOJO_DEADLINE_INDEFINITE,
                                                i,
                                                &did_wait[i],
                                                &result[i],
                                                &context[i]));
       threads.back()->Start();
     }
     for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
       threads.push_back(new test::WaiterThread(d,
                                                MOJO_HANDLE_SIGNAL_WRITABLE,
                                                MOJO_DEADLINE_INDEFINITE,
                                                i,
                                                &did_wait[i],
                                                &result[i],
                                                &context[i]));
       threads.back()->Start();
     }
     base::PlatformThread::Sleep(1 * test::EpsilonTimeout());
     d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
     base::PlatformThread::Sleep(1 * test::EpsilonTimeout());
     d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the threads.
   for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_OK, result[i]);
     EXPECT_EQ(i, context[i]);
   }
   for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, result[i]);
     EXPECT_EQ(i, context[i]);
   }

   // Some wait for readable, some for writable, and becomes readable after some
   // time.
   {
     scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
     ScopedVector<test::WaiterThread> threads;
     for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
       threads.push_back(
           new test::WaiterThread(d,
                                  MOJO_HANDLE_SIGNAL_READABLE,
                                  3 * test::EpsilonTimeout().InMicroseconds(),
                                  i,
                                  &did_wait[i], &result[i], &context[i]));
       threads.back()->Start();
     }
     for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
       threads.push_back(
           new test::WaiterThread(d,
                                  MOJO_HANDLE_SIGNAL_WRITABLE,
                                  1 * test::EpsilonTimeout().InMicroseconds(),
                                  i,
                                  &did_wait[i], &result[i], &context[i]));
       threads.back()->Start();
     }
     base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
     d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
     // All those waiting for writable should have timed out.
     EXPECT_EQ(MOJO_RESULT_OK, d->Close());
   }  // Joins the threads.
   for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_OK, result[i]);
     EXPECT_EQ(i, context[i]);
   }
   for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
     EXPECT_TRUE(did_wait[i]);
     EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, result[i]);
   }
 }

 // TODO(vtl): Stress test?

 }  // namespace
 }  // namespace system
 }  // namespace mojo
	// Copyright 2013 The Chromium Authors. All rights reserved.
	// Use of this source code is governed by a BSD-style license that can be
	// found in the LICENSE file.

	// NOTE(vtl): Some of these tests are inherently flaky (e.g., if run on a
	// heavily-loaded system). Sorry. \|test::EpsilonTimeout()\| may be increased to
	// increase tolerance and reduce observed flakiness (though doing so reduces the
	// meaningfulness of the test).

	#include "mojo/system/simple_dispatcher.h"

	#include "base/basictypes.h"
	#include "base/logging.h"
	#include "base/memory/ref_counted.h"
	#include "base/memory/scoped_vector.h"
	#include "base/synchronization/lock.h"
	#include "base/threading/platform_thread.h" // For \|Sleep()\|.
	#include "base/time/time.h"
	#include "mojo/system/test_utils.h"
	#include "mojo/system/waiter.h"
	#include "mojo/system/waiter_test_utils.h"
	#include "testing/gtest/include/gtest/gtest.h"

	namespace mojo {
	namespace system {
	namespace {

	class MockSimpleDispatcher : public SimpleDispatcher {
	public:
	MockSimpleDispatcher()
	: state_(MOJO_HANDLE_SIGNAL_NONE,
	MOJO_HANDLE_SIGNAL_READABLE \| MOJO_HANDLE_SIGNAL_WRITABLE) {}

	void SetSatisfiedSignals(MojoHandleSignals new_satisfied_signals) {
	base::AutoLock locker(lock());

	// Any new signals that are set should be satisfiable.
	CHECK_EQ(new_satisfied_signals & ~state_.satisfied_signals,
	new_satisfied_signals & ~state_.satisfied_signals &
	state_.satisfiable_signals);

	if (new_satisfied_signals == state_.satisfied_signals)
	return;

	state_.satisfied_signals = new_satisfied_signals;
	HandleSignalsStateChangedNoLock();
	}

	void SetSatisfiableSignals(MojoHandleSignals new_satisfiable_signals) {
	base::AutoLock locker(lock());

	// Satisfied implies satisfiable.
	CHECK_EQ(new_satisfiable_signals & state_.satisfied_signals,
	state_.satisfied_signals);

	if (new_satisfiable_signals == state_.satisfiable_signals)
	return;

	state_.satisfiable_signals = new_satisfiable_signals;
	HandleSignalsStateChangedNoLock();
	}

	virtual Type GetType() const OVERRIDE {
	return kTypeUnknown;
	}

	private:
	friend class base::RefCountedThreadSafe<MockSimpleDispatcher>;
	virtual ~MockSimpleDispatcher() {}

	virtual scoped_refptr<Dispatcher>
	CreateEquivalentDispatcherAndCloseImplNoLock() OVERRIDE {
	scoped_refptr<MockSimpleDispatcher> rv(new MockSimpleDispatcher());
	rv->state_ = state_;
	return scoped_refptr<Dispatcher>(rv.get());
	}

	// \|SimpleDispatcher\| implementation:
	virtual HandleSignalsState GetHandleSignalsStateNoLock() const OVERRIDE {
	lock().AssertAcquired();
	return state_;
	}

	// Protected by \|lock()\|:
	HandleSignalsState state_;

	DISALLOW_COPY_AND_ASSIGN(MockSimpleDispatcher);
	};

	TEST(SimpleDispatcherTest, Basic) {
	test::Stopwatch stopwatch;

	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	Waiter w;
	uint32_t context = 0;

	// Try adding a readable waiter when already readable.
	w.Init();
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
	d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_READABLE, 0));
	// Shouldn't need to remove the waiter (it was not added).

	// Wait (forever) for writable when already writable.
	w.Init();
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 1));
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_OK, w.Wait(MOJO_DEADLINE_INDEFINITE, &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(1u, context);
	d->RemoveWaiter(&w);

	// Wait for zero time for writable when already writable.
	w.Init();
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 2));
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_OK, w.Wait(0, &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(2u, context);
	d->RemoveWaiter(&w);

	// Wait for non-zero, finite time for writable when already writable.
	w.Init();
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 3));
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_OK,
	w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(3u, context);
	d->RemoveWaiter(&w);

	// Wait for zero time for writable when not writable (will time out).
	w.Init();
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 4));
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, w.Wait(0, NULL));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	d->RemoveWaiter(&w);

	// Wait for non-zero, finite time for writable when not writable (will time
	// out).
	w.Init();
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 5));
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED,
	w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), NULL));
	base::TimeDelta elapsed = stopwatch.Elapsed();
	EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
	EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
	d->RemoveWaiter(&w);

	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	}

	TEST(SimpleDispatcherTest, BasicUnsatisfiable) {
	test::Stopwatch stopwatch;

	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	Waiter w;
	uint32_t context = 0;

	// Try adding a writable waiter when it can never be writable.
	w.Init();
	d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
	d->SetSatisfiedSignals(0);
	EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
	d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 1));
	// Shouldn't need to remove the waiter (it was not added).

	// Wait (forever) for writable and then it becomes never writable.
	w.Init();
	d->SetSatisfiableSignals(
	MOJO_HANDLE_SIGNAL_READABLE \| MOJO_HANDLE_SIGNAL_WRITABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 2));
	d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
	w.Wait(MOJO_DEADLINE_INDEFINITE, &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(2u, context);
	d->RemoveWaiter(&w);

	// Wait for zero time for writable and then it becomes never writable.
	w.Init();
	d->SetSatisfiableSignals(
	MOJO_HANDLE_SIGNAL_READABLE \| MOJO_HANDLE_SIGNAL_WRITABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 3));
	d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, w.Wait(0, &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(3u, context);
	d->RemoveWaiter(&w);

	// Wait for non-zero, finite time for writable and then it becomes never
	// writable.
	w.Init();
	d->SetSatisfiableSignals(
	MOJO_HANDLE_SIGNAL_READABLE \| MOJO_HANDLE_SIGNAL_WRITABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 4));
	d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
	w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(4u, context);
	d->RemoveWaiter(&w);

	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	}

	TEST(SimpleDispatcherTest, BasicClosed) {
	test::Stopwatch stopwatch;

	scoped_refptr<MockSimpleDispatcher> d;
	Waiter w;
	uint32_t context = 0;

	// Try adding a writable waiter when the dispatcher has been closed.
	d = new MockSimpleDispatcher();
	w.Init();
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	EXPECT_EQ(MOJO_RESULT_INVALID_ARGUMENT,
	d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 1));
	// Shouldn't need to remove the waiter (it was not added).

	// Wait (forever) for writable and then the dispatcher is closed.
	d = new MockSimpleDispatcher();
	w.Init();
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 2));
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_CANCELLED, w.Wait(MOJO_DEADLINE_INDEFINITE, &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(2u, context);
	// Don't need to remove waiters from closed dispatchers.

	// Wait for zero time for writable and then the dispatcher is closed.
	d = new MockSimpleDispatcher();
	w.Init();
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 3));
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_CANCELLED, w.Wait(0, &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(3u, context);
	// Don't need to remove waiters from closed dispatchers.

	// Wait for non-zero, finite time for writable and then the dispatcher is
	// closed.
	d = new MockSimpleDispatcher();
	w.Init();
	EXPECT_EQ(MOJO_RESULT_OK, d->AddWaiter(&w, MOJO_HANDLE_SIGNAL_WRITABLE, 4));
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	stopwatch.Start();
	EXPECT_EQ(MOJO_RESULT_CANCELLED,
	w.Wait(2 * test::EpsilonTimeout().InMicroseconds(), &context));
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_EQ(4u, context);
	// Don't need to remove waiters from closed dispatchers.
	}

	TEST(SimpleDispatcherTest, BasicThreaded) {
	test::Stopwatch stopwatch;
	bool did_wait;
	MojoResult result;
	uint32_t context;

	// Wait for readable (already readable).
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	{
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	test::WaiterThread thread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	1,
	&did_wait, &result, &context);
	stopwatch.Start();
	thread.Start();
	} // Joins the thread.
	// If we closed earlier, then probably we'd get a \|MOJO_RESULT_CANCELLED\|.
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	}
	EXPECT_LT(stopwatch.Elapsed(), test::EpsilonTimeout());
	EXPECT_FALSE(did_wait);
	EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS, result);

	// Wait for readable and becomes readable after some time.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	test::WaiterThread thread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	2,
	&did_wait, &result, &context);
	stopwatch.Start();
	thread.Start();
	base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the thread.
	base::TimeDelta elapsed = stopwatch.Elapsed();
	EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
	EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
	EXPECT_TRUE(did_wait);
	EXPECT_EQ(MOJO_RESULT_OK, result);
	EXPECT_EQ(2u, context);

	// Wait for readable and becomes never-readable after some time.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	test::WaiterThread thread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	3,
	&did_wait, &result, &context);
	stopwatch.Start();
	thread.Start();
	base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
	d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_NONE);
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the thread.
	elapsed = stopwatch.Elapsed();
	EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
	EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
	EXPECT_TRUE(did_wait);
	EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, result);
	EXPECT_EQ(3u, context);

	// Wait for readable and dispatcher gets closed.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	test::WaiterThread thread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	4,
	&did_wait, &result, &context);
	stopwatch.Start();
	thread.Start();
	base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the thread.
	elapsed = stopwatch.Elapsed();
	EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
	EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
	EXPECT_TRUE(did_wait);
	EXPECT_EQ(MOJO_RESULT_CANCELLED, result);
	EXPECT_EQ(4u, context);

	// Wait for readable and times out.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	{
	test::WaiterThread thread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	2 * test::EpsilonTimeout().InMicroseconds(),
	5,
	&did_wait, &result, &context);
	stopwatch.Start();
	thread.Start();
	base::PlatformThread::Sleep(1 * test::EpsilonTimeout());
	// Not what we're waiting for.
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_WRITABLE);
	} // Joins the thread (after its wait times out).
	// If we closed earlier, then probably we'd get a \|MOJO_RESULT_CANCELLED\|.
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	}
	elapsed = stopwatch.Elapsed();
	EXPECT_GT(elapsed, (2-1) * test::EpsilonTimeout());
	EXPECT_LT(elapsed, (2+1) * test::EpsilonTimeout());
	EXPECT_TRUE(did_wait);
	EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, result);
	}

	TEST(SimpleDispatcherTest, MultipleWaiters) {
	static const uint32_t kNumWaiters = 20;

	bool did_wait[kNumWaiters];
	MojoResult result[kNumWaiters];
	uint32_t context[kNumWaiters];

	// All wait for readable and becomes readable after some time.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	ScopedVector<test::WaiterThread> threads;
	for (uint32_t i = 0; i < kNumWaiters; i++) {
	threads.push_back(new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	i,
	&did_wait[i],
	&result[i],
	&context[i]));
	threads.back()->Start();
	}
	base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the threads.
	for (uint32_t i = 0; i < kNumWaiters; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_OK, result[i]);
	EXPECT_EQ(i, context[i]);
	}

	// Some wait for readable, some for writable, and becomes readable after some
	// time.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	ScopedVector<test::WaiterThread> threads;
	for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
	threads.push_back(new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	i,
	&did_wait[i],
	&result[i],
	&context[i]));
	threads.back()->Start();
	}
	for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
	threads.push_back(new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_WRITABLE,
	MOJO_DEADLINE_INDEFINITE,
	i,
	&did_wait[i],
	&result[i],
	&context[i]));
	threads.back()->Start();
	}
	base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	// This will wake up the ones waiting to write.
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the threads.
	for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_OK, result[i]);
	EXPECT_EQ(i, context[i]);
	}
	for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_CANCELLED, result[i]);
	EXPECT_EQ(i, context[i]);
	}

	// Some wait for readable, some for writable, and becomes readable and
	// never-writable after some time.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	ScopedVector<test::WaiterThread> threads;
	for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
	threads.push_back(new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	MOJO_DEADLINE_INDEFINITE,
	i,
	&did_wait[i],
	&result[i],
	&context[i]));
	threads.back()->Start();
	}
	for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
	threads.push_back(new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_WRITABLE,
	MOJO_DEADLINE_INDEFINITE,
	i,
	&did_wait[i],
	&result[i],
	&context[i]));
	threads.back()->Start();
	}
	base::PlatformThread::Sleep(1 * test::EpsilonTimeout());
	d->SetSatisfiableSignals(MOJO_HANDLE_SIGNAL_READABLE);
	base::PlatformThread::Sleep(1 * test::EpsilonTimeout());
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the threads.
	for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_OK, result[i]);
	EXPECT_EQ(i, context[i]);
	}
	for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, result[i]);
	EXPECT_EQ(i, context[i]);
	}

	// Some wait for readable, some for writable, and becomes readable after some
	// time.
	{
	scoped_refptr<MockSimpleDispatcher> d(new MockSimpleDispatcher());
	ScopedVector<test::WaiterThread> threads;
	for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
	threads.push_back(
	new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_READABLE,
	3 * test::EpsilonTimeout().InMicroseconds(),
	i,
	&did_wait[i], &result[i], &context[i]));
	threads.back()->Start();
	}
	for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
	threads.push_back(
	new test::WaiterThread(d,
	MOJO_HANDLE_SIGNAL_WRITABLE,
	1 * test::EpsilonTimeout().InMicroseconds(),
	i,
	&did_wait[i], &result[i], &context[i]));
	threads.back()->Start();
	}
	base::PlatformThread::Sleep(2 * test::EpsilonTimeout());
	d->SetSatisfiedSignals(MOJO_HANDLE_SIGNAL_READABLE);
	// All those waiting for writable should have timed out.
	EXPECT_EQ(MOJO_RESULT_OK, d->Close());
	} // Joins the threads.
	for (uint32_t i = 0; i < kNumWaiters / 2; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_OK, result[i]);
	EXPECT_EQ(i, context[i]);
	}
	for (uint32_t i = kNumWaiters / 2; i < kNumWaiters; i++) {
	EXPECT_TRUE(did_wait[i]);
	EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, result[i]);
	}
	}

	// TODO(vtl): Stress test?

	} // namespace
	} // namespace system
	} // namespace mojo