| /****************************************************************************** |
| * |
| * Copyright (C) 2002-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * this file contains the connection interface functions |
| * |
| ******************************************************************************/ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdio.h> |
| |
| |
| #include "gki.h" |
| #include "bt_types.h" |
| |
| #include "l2cdefs.h" |
| #include "l2c_api.h" |
| |
| #include "btu.h" |
| #include "btm_api.h" |
| #include "btm_int.h" |
| |
| #include "hiddefs.h" |
| |
| #include "hidh_api.h" |
| #include "hidh_int.h" |
| #include "bt_utils.h" |
| |
| static UINT8 find_conn_by_cid (UINT16 cid); |
| static void hidh_conn_retry (UINT8 dhandle); |
| |
| /********************************************************************************/ |
| /* L O C A L F U N C T I O N P R O T O T Y P E S */ |
| /********************************************************************************/ |
| static void hidh_l2cif_connect_ind (BD_ADDR bd_addr, UINT16 l2cap_cid, |
| UINT16 psm, UINT8 l2cap_id); |
| static void hidh_l2cif_connect_cfm (UINT16 l2cap_cid, UINT16 result); |
| static void hidh_l2cif_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg); |
| static void hidh_l2cif_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg); |
| static void hidh_l2cif_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed); |
| static void hidh_l2cif_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg); |
| static void hidh_l2cif_disconnect_cfm (UINT16 l2cap_cid, UINT16 result); |
| static void hidh_l2cif_cong_ind (UINT16 l2cap_cid, BOOLEAN congested); |
| |
| static const tL2CAP_APPL_INFO hst_reg_info = |
| { |
| hidh_l2cif_connect_ind, |
| hidh_l2cif_connect_cfm, |
| NULL, |
| hidh_l2cif_config_ind, |
| hidh_l2cif_config_cfm, |
| hidh_l2cif_disconnect_ind, |
| hidh_l2cif_disconnect_cfm, |
| NULL, |
| hidh_l2cif_data_ind, |
| hidh_l2cif_cong_ind, |
| NULL /* tL2CA_TX_COMPLETE_CB */ |
| }; |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_reg |
| ** |
| ** Description This function initializes the SDP unit. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tHID_STATUS hidh_conn_reg (void) |
| { |
| int xx; |
| |
| /* Initialize the L2CAP configuration. We only care about MTU and flush */ |
| memset(&hh_cb.l2cap_cfg, 0, sizeof(tL2CAP_CFG_INFO)); |
| |
| hh_cb.l2cap_cfg.mtu_present = TRUE; |
| hh_cb.l2cap_cfg.mtu = HID_HOST_MTU; |
| hh_cb.l2cap_cfg.flush_to_present = TRUE; |
| hh_cb.l2cap_cfg.flush_to = HID_HOST_FLUSH_TO; |
| |
| /* Now, register with L2CAP */ |
| if (!L2CA_Register (HID_PSM_CONTROL, (tL2CAP_APPL_INFO *) &hst_reg_info)) |
| { |
| HIDH_TRACE_ERROR ("HID-Host Control Registration failed"); |
| return (HID_ERR_L2CAP_FAILED) ; |
| } |
| if (!L2CA_Register (HID_PSM_INTERRUPT, (tL2CAP_APPL_INFO *) &hst_reg_info)) |
| { |
| L2CA_Deregister( HID_PSM_CONTROL ) ; |
| HIDH_TRACE_ERROR ("HID-Host Interrupt Registration failed"); |
| return (HID_ERR_L2CAP_FAILED) ; |
| } |
| |
| for (xx = 0; xx < HID_HOST_MAX_DEVICES; xx++) |
| { |
| hh_cb.devices[xx].in_use = FALSE ; |
| hh_cb.devices[xx].conn.conn_state = HID_CONN_STATE_UNUSED; |
| } |
| |
| return (HID_SUCCESS); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_conn_disconnect |
| ** |
| ** Description This function disconnects a connection. |
| ** |
| ** Returns TRUE if disconnect started, FALSE if already disconnected |
| ** |
| *******************************************************************************/ |
| tHID_STATUS hidh_conn_disconnect (UINT8 dhandle) |
| { |
| tHID_CONN *p_hcon = &hh_cb.devices[dhandle].conn; |
| |
| HIDH_TRACE_EVENT ("HID-Host disconnect"); |
| |
| if ((p_hcon->ctrl_cid != 0) || (p_hcon->intr_cid != 0)) |
| { |
| p_hcon->conn_state = HID_CONN_STATE_DISCONNECTING; |
| |
| /* Set l2cap idle timeout to 0 (so ACL link is disconnected |
| * immediately after last channel is closed) */ |
| L2CA_SetIdleTimeoutByBdAddr(hh_cb.devices[dhandle].addr, 0); |
| /* Disconnect both interrupt and control channels */ |
| if (p_hcon->intr_cid) |
| L2CA_DisconnectReq (p_hcon->intr_cid); |
| else if (p_hcon->ctrl_cid) |
| L2CA_DisconnectReq (p_hcon->ctrl_cid); |
| } |
| else |
| { |
| p_hcon->conn_state = HID_CONN_STATE_UNUSED; |
| } |
| |
| return (HID_SUCCESS); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_sec_check_complete_term |
| ** |
| ** Description HID security check complete callback function. |
| ** |
| ** Returns Send L2CA_ConnectRsp OK if secutiry check succeed; otherwise |
| ** send security block L2C connection response. |
| ** |
| *******************************************************************************/ |
| void hidh_sec_check_complete_term (BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, UINT8 res) |
| { |
| tHID_HOST_DEV_CTB *p_dev= (tHID_HOST_DEV_CTB *) p_ref_data; |
| UNUSED(bd_addr); |
| UNUSED (transport); |
| |
| if( res == BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY ) |
| { |
| p_dev->conn.disc_reason = HID_SUCCESS; /* Authentication passed. Reset disc_reason (from HID_ERR_AUTH_FAILED) */ |
| |
| p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_INTR; |
| |
| /* Send response to the L2CAP layer. */ |
| L2CA_ConnectRsp (p_dev->addr, p_dev->conn.ctrl_id, p_dev->conn.ctrl_cid, L2CAP_CONN_OK, L2CAP_CONN_OK); |
| |
| /* Send a Configuration Request. */ |
| L2CA_ConfigReq (p_dev->conn.ctrl_cid, &hh_cb.l2cap_cfg); |
| |
| } |
| /* security check fail */ |
| else if (res != BTM_SUCCESS) |
| { |
| p_dev->conn.disc_reason = HID_ERR_AUTH_FAILED; /* Save reason for disconnecting */ |
| p_dev->conn.conn_state = HID_CONN_STATE_UNUSED; |
| L2CA_ConnectRsp (p_dev->addr, p_dev->conn.ctrl_id, p_dev->conn.ctrl_cid, L2CAP_CONN_SECURITY_BLOCK, L2CAP_CONN_OK); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_connect_ind |
| ** |
| ** Description This function handles an inbound connection indication |
| ** from L2CAP. This is the case where we are acting as a |
| ** server. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_connect_ind (BD_ADDR bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id) |
| { |
| tHID_CONN *p_hcon; |
| BOOLEAN bAccept = TRUE; |
| UINT8 i = HID_HOST_MAX_DEVICES; |
| tHID_HOST_DEV_CTB *p_dev; |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd L2CAP conn ind, PSM: 0x%04x CID 0x%x", psm, l2cap_cid); |
| |
| /* always add incoming connection device into HID database by default */ |
| if (HID_HostAddDev(bd_addr, HID_SEC_REQUIRED, &i) != HID_SUCCESS) |
| { |
| L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_SECURITY_BLOCK, 0); |
| return; |
| } |
| |
| p_hcon = &hh_cb.devices[i].conn; |
| p_dev = &hh_cb.devices[i]; |
| |
| /* Check we are in the correct state for this */ |
| if (psm == HID_PSM_INTERRUPT) |
| { |
| if (p_hcon->ctrl_cid == 0) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd INTR L2CAP conn ind, but no CTL channel"); |
| bAccept = FALSE; |
| } |
| if (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_INTR) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd INTR L2CAP conn ind, wrong state: %d", |
| p_hcon->conn_state); |
| bAccept = FALSE; |
| } |
| } |
| else /* CTRL channel */ |
| { |
| #if defined(HID_HOST_ACPT_NEW_CONN) && (HID_HOST_ACPT_NEW_CONN == TRUE) |
| p_hcon->ctrl_cid = p_hcon->intr_cid = 0; |
| p_hcon->conn_state = HID_CONN_STATE_UNUSED; |
| #else |
| if (p_hcon->conn_state != HID_CONN_STATE_UNUSED) |
| { |
| HIDH_TRACE_WARNING ("HID-Host - Rcvd CTL L2CAP conn ind, wrong state: %d", |
| p_hcon->conn_state); |
| bAccept = FALSE; |
| } |
| #endif |
| } |
| |
| if (!bAccept) |
| { |
| L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_NO_RESOURCES, 0); |
| return; |
| } |
| |
| if (psm == HID_PSM_CONTROL) |
| { |
| p_hcon->conn_flags = 0; |
| p_hcon->ctrl_cid = l2cap_cid; |
| p_hcon->ctrl_id = l2cap_id; |
| p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* In case disconnection occurs before security is completed, then set CLOSE_EVT reason code to 'connection failure' */ |
| |
| p_hcon->conn_state = HID_CONN_STATE_SECURITY; |
| if(btm_sec_mx_access_request (p_dev->addr, HID_PSM_CONTROL, |
| FALSE, BTM_SEC_PROTO_HID, |
| (p_dev->attr_mask & HID_SEC_REQUIRED) ? HID_SEC_CHN : HID_NOSEC_CHN, |
| &hidh_sec_check_complete_term, p_dev) == BTM_CMD_STARTED) |
| { |
| L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_PENDING, L2CAP_CONN_OK); |
| } |
| |
| return; |
| } |
| |
| /* Transition to the next appropriate state, configuration */ |
| p_hcon->conn_state = HID_CONN_STATE_CONFIG; |
| p_hcon->intr_cid = l2cap_cid; |
| |
| /* Send response to the L2CAP layer. */ |
| L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK); |
| |
| /* Send a Configuration Request. */ |
| L2CA_ConfigReq (l2cap_cid, &hh_cb.l2cap_cfg); |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd L2CAP conn ind, sent config req, PSM: 0x%04x CID 0x%x", |
| psm, l2cap_cid); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_proc_repage_timeout |
| ** |
| ** Description This function handles timeout (to page device). |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void hidh_proc_repage_timeout (TIMER_LIST_ENT *p_tle) |
| { |
| hidh_conn_initiate( (UINT8) p_tle->param ) ; |
| hh_cb.devices[p_tle->param].conn_tries++; |
| hh_cb.callback( (UINT8) p_tle->param, hh_cb.devices[p_tle->param].addr, |
| HID_HDEV_EVT_RETRYING, hh_cb.devices[p_tle->param].conn_tries, NULL ) ; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_sec_check_complete_orig |
| ** |
| ** Description This function checks to see if security procedures are being |
| ** carried out or not.. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void hidh_sec_check_complete_orig (BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, UINT8 res) |
| { |
| tHID_HOST_DEV_CTB *p_dev = (tHID_HOST_DEV_CTB *) p_ref_data; |
| UINT8 dhandle; |
| #if (HID_HOST_MAX_CONN_RETRY > 0) |
| UINT32 cb_res = HID_ERR_AUTH_FAILED; |
| #endif |
| UNUSED(bd_addr); |
| UNUSED (transport); |
| |
| dhandle = ((UINT32)p_dev - (UINT32)&(hh_cb.devices[0]))/ sizeof(tHID_HOST_DEV_CTB); |
| if( res == BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY ) |
| { |
| HIDH_TRACE_EVENT ("HID-Host Originator security pass."); |
| p_dev->conn.disc_reason = HID_SUCCESS; /* Authentication passed. Reset disc_reason (from HID_ERR_AUTH_FAILED) */ |
| |
| /* Transition to the next appropriate state, configuration */ |
| p_dev->conn.conn_state = HID_CONN_STATE_CONFIG; |
| L2CA_ConfigReq (p_dev->conn.ctrl_cid, &hh_cb.l2cap_cfg); |
| HIDH_TRACE_EVENT ("HID-Host Got Control conn cnf, sent cfg req, CID: 0x%x", p_dev->conn.ctrl_cid); |
| |
| } |
| |
| if( res != BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY ) |
| { |
| #if (HID_HOST_MAX_CONN_RETRY > 0) |
| if( res == BTM_DEVICE_TIMEOUT ) |
| { |
| if( p_dev->conn_tries <= HID_HOST_MAX_CONN_RETRY ) |
| { |
| hidh_conn_retry (dhandle); |
| return; |
| } |
| else |
| cb_res = HID_L2CAP_CONN_FAIL | HCI_ERR_PAGE_TIMEOUT ; |
| } |
| #endif |
| p_dev->conn.disc_reason = HID_ERR_AUTH_FAILED; /* Save reason for disconnecting */ |
| hidh_conn_disconnect(dhandle); |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_connect_cfm |
| ** |
| ** Description This function handles the connect confirm events |
| ** from L2CAP. This is the case when we are acting as a |
| ** client and have sent a connect request. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_connect_cfm (UINT16 l2cap_cid, UINT16 result) |
| { |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| UINT32 reason; |
| tHID_HOST_DEV_CTB *p_dev = NULL; |
| |
| /* Find CCB based on CID, and verify we are in a state to accept this message */ |
| if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES ) |
| { |
| p_dev = &hh_cb.devices[dhandle]; |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| } |
| |
| if ((p_hcon == NULL) |
| || (!(p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG)) |
| || ((l2cap_cid == p_hcon->ctrl_cid) && (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_CTRL)) |
| || ((l2cap_cid == p_hcon->intr_cid) && (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_INTR) |
| && (p_hcon->conn_state != HID_CONN_STATE_DISCONNECTING))) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd unexpected conn cnf, CID 0x%x ", l2cap_cid); |
| return; |
| } |
| |
| if (result != L2CAP_CONN_OK) |
| { |
| if (l2cap_cid == p_hcon->ctrl_cid) |
| p_hcon->ctrl_cid = 0; |
| else |
| p_hcon->intr_cid = 0; |
| |
| hidh_conn_disconnect(dhandle); |
| |
| #if (HID_HOST_MAX_CONN_RETRY > 0) |
| if( (hh_cb.devices[dhandle].conn_tries <= HID_HOST_MAX_CONN_RETRY) && |
| (result == HCI_ERR_CONNECTION_TOUT || result == HCI_ERR_UNSPECIFIED || |
| result == HCI_ERR_PAGE_TIMEOUT) ) |
| { |
| hidh_conn_retry(dhandle); |
| } |
| else |
| #endif |
| { |
| reason = HID_L2CAP_CONN_FAIL | (UINT32) result ; |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, reason, NULL ) ; |
| } |
| return; |
| } |
| /* receive Control Channel connect confirmation */ |
| if (l2cap_cid == p_hcon->ctrl_cid) |
| { |
| /* check security requirement */ |
| p_hcon->conn_state = HID_CONN_STATE_SECURITY; |
| p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* In case disconnection occurs before security is completed, then set CLOSE_EVT reason code to "connection failure" */ |
| |
| btm_sec_mx_access_request (p_dev->addr, HID_PSM_CONTROL, |
| TRUE, BTM_SEC_PROTO_HID, |
| (p_dev->attr_mask & HID_SEC_REQUIRED) ? HID_SEC_CHN : HID_NOSEC_CHN, |
| &hidh_sec_check_complete_orig, p_dev); |
| } |
| else |
| { |
| p_hcon->conn_state = HID_CONN_STATE_CONFIG; |
| /* Send a Configuration Request. */ |
| L2CA_ConfigReq (l2cap_cid, &hh_cb.l2cap_cfg); |
| HIDH_TRACE_EVENT ("HID-Host got Interrupt conn cnf, sent cfg req, CID: 0x%x", l2cap_cid); |
| } |
| |
| return; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_config_ind |
| ** |
| ** Description This function processes the L2CAP configuration indication |
| ** event. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg) |
| { |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| tHID_HOST_DEV_CTB *p_dev; |
| UINT32 reason; |
| |
| /* Find CCB based on CID */ |
| if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES ) |
| { |
| p_dev = &hh_cb.devices[dhandle]; |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| } |
| |
| if (p_hcon == NULL) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid); |
| return; |
| } |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd cfg ind, sent cfg cfm, CID: 0x%x", l2cap_cid); |
| |
| /* Remember the remote MTU size */ |
| if ((!p_cfg->mtu_present) || (p_cfg->mtu > HID_HOST_MTU)) |
| p_hcon->rem_mtu_size = HID_HOST_MTU; |
| else |
| p_hcon->rem_mtu_size = p_cfg->mtu; |
| |
| /* For now, always accept configuration from the other side */ |
| p_cfg->flush_to_present = FALSE; |
| p_cfg->mtu_present = FALSE; |
| p_cfg->result = L2CAP_CFG_OK; |
| |
| L2CA_ConfigRsp (l2cap_cid, p_cfg); |
| |
| if (l2cap_cid == p_hcon->ctrl_cid) |
| { |
| p_hcon->conn_flags |= HID_CONN_FLAGS_HIS_CTRL_CFG_DONE; |
| if ((p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG) && |
| (p_hcon->conn_flags & HID_CONN_FLAGS_MY_CTRL_CFG_DONE)) |
| { |
| /* Connect interrupt channel */ |
| p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* Reset initial reason for CLOSE_EVT: Connection Attempt was made but failed */ |
| if ((p_hcon->intr_cid = L2CA_ConnectReq (HID_PSM_INTERRUPT, hh_cb.devices[dhandle].addr)) == 0) |
| { |
| HIDH_TRACE_WARNING ("HID-Host INTR Originate failed"); |
| reason = HID_L2CAP_REQ_FAIL ; |
| p_hcon->conn_state = HID_CONN_STATE_UNUSED; |
| hidh_conn_disconnect (dhandle); |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, reason, NULL ) ; |
| return; |
| } |
| else |
| { |
| /* Transition to the next appropriate state, waiting for connection confirm on interrupt channel. */ |
| p_hcon->conn_state = HID_CONN_STATE_CONNECTING_INTR; |
| } |
| } |
| } |
| else |
| p_hcon->conn_flags |= HID_CONN_FLAGS_HIS_INTR_CFG_DONE; |
| |
| /* If all configuration is complete, change state and tell management we are up */ |
| if (((p_hcon->conn_flags & HID_CONN_FLAGS_ALL_CONFIGURED) == HID_CONN_FLAGS_ALL_CONFIGURED) |
| && (p_hcon->conn_state == HID_CONN_STATE_CONFIG)) |
| { |
| p_hcon->conn_state = HID_CONN_STATE_CONNECTED; |
| /* Reset disconnect reason to success, as connection successful */ |
| p_hcon->disc_reason = HID_SUCCESS; |
| |
| hh_cb.devices[dhandle].state = HID_DEV_CONNECTED; |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_OPEN, 0, NULL ) ; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_config_cfm |
| ** |
| ** Description This function processes the L2CAP configuration confirmation |
| ** event. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg) |
| { |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| UINT32 reason; |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd cfg cfm, CID: 0x%x Result: %d", l2cap_cid, p_cfg->result); |
| |
| /* Find CCB based on CID */ |
| if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES ) |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| |
| if (p_hcon == NULL) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid); |
| return; |
| } |
| |
| /* If configuration failed, disconnect the channel(s) */ |
| if (p_cfg->result != L2CAP_CFG_OK) |
| { |
| hidh_conn_disconnect (dhandle); |
| reason = HID_L2CAP_CFG_FAIL | (UINT32) p_cfg->result ; |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, reason, NULL ) ; |
| return; |
| } |
| |
| if (l2cap_cid == p_hcon->ctrl_cid) |
| { |
| p_hcon->conn_flags |= HID_CONN_FLAGS_MY_CTRL_CFG_DONE; |
| if ((p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG) && |
| (p_hcon->conn_flags & HID_CONN_FLAGS_HIS_CTRL_CFG_DONE)) |
| { |
| /* Connect interrupt channel */ |
| p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* Reset initial reason for CLOSE_EVT: Connection Attempt was made but failed */ |
| if ((p_hcon->intr_cid = L2CA_ConnectReq (HID_PSM_INTERRUPT, hh_cb.devices[dhandle].addr)) == 0) |
| { |
| HIDH_TRACE_WARNING ("HID-Host INTR Originate failed"); |
| reason = HID_L2CAP_REQ_FAIL ; |
| p_hcon->conn_state = HID_CONN_STATE_UNUSED; |
| hidh_conn_disconnect (dhandle); |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, reason, NULL ) ; |
| return; |
| } |
| else |
| { |
| /* Transition to the next appropriate state, waiting for connection confirm on interrupt channel. */ |
| p_hcon->conn_state = HID_CONN_STATE_CONNECTING_INTR; |
| } |
| } |
| } |
| else |
| p_hcon->conn_flags |= HID_CONN_FLAGS_MY_INTR_CFG_DONE; |
| |
| /* If all configuration is complete, change state and tell management we are up */ |
| if (((p_hcon->conn_flags & HID_CONN_FLAGS_ALL_CONFIGURED) == HID_CONN_FLAGS_ALL_CONFIGURED) |
| && (p_hcon->conn_state == HID_CONN_STATE_CONFIG)) |
| { |
| p_hcon->conn_state = HID_CONN_STATE_CONNECTED; |
| /* Reset disconnect reason to success, as connection successful */ |
| p_hcon->disc_reason = HID_SUCCESS; |
| |
| hh_cb.devices[dhandle].state = HID_DEV_CONNECTED; |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_OPEN, 0, NULL ) ; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_disconnect_ind |
| ** |
| ** Description This function handles a disconnect event from L2CAP. If |
| ** requested to, we ack the disconnect before dropping the CCB |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed) |
| { |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| UINT16 disc_res = HCI_SUCCESS; |
| UINT16 hid_close_evt_reason; |
| |
| /* Find CCB based on CID */ |
| if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES ) |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| |
| if (p_hcon == NULL) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd L2CAP disc, unknown CID: 0x%x", l2cap_cid); |
| return; |
| } |
| |
| if (ack_needed) |
| L2CA_DisconnectRsp (l2cap_cid); |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd L2CAP disc, CID: 0x%x", l2cap_cid); |
| |
| p_hcon->conn_state = HID_CONN_STATE_DISCONNECTING; |
| |
| if (l2cap_cid == p_hcon->ctrl_cid) |
| p_hcon->ctrl_cid = 0; |
| else |
| p_hcon->intr_cid = 0; |
| |
| if ((p_hcon->ctrl_cid == 0) && (p_hcon->intr_cid == 0)) |
| { |
| hh_cb.devices[dhandle].state = HID_DEV_NO_CONN; |
| p_hcon->conn_state = HID_CONN_STATE_UNUSED; |
| |
| if( !ack_needed ) |
| disc_res = btm_get_acl_disc_reason_code(); |
| |
| #if (HID_HOST_MAX_CONN_RETRY > 0) |
| if( (disc_res == HCI_ERR_CONNECTION_TOUT || disc_res == HCI_ERR_UNSPECIFIED) && |
| (!(hh_cb.devices[dhandle].attr_mask & HID_RECONN_INIT)) && |
| (hh_cb.devices[dhandle].attr_mask & HID_NORMALLY_CONNECTABLE)) |
| { |
| hh_cb.devices[dhandle].conn_tries = 0; |
| hh_cb.devices[dhandle].conn.timer_entry.param = (UINT32) dhandle; |
| btu_start_timer (&(hh_cb.devices[dhandle].conn.timer_entry), BTU_TTYPE_HID_HOST_REPAGE_TO, HID_HOST_REPAGE_WIN); |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, disc_res, NULL); |
| } |
| else |
| #endif |
| { |
| /* Set reason code for HID_HDEV_EVT_CLOSE */ |
| hid_close_evt_reason = p_hcon->disc_reason; |
| |
| /* If we got baseband sent HCI_DISCONNECT_COMPLETE_EVT due to security failure, then set reason to HID_ERR_AUTH_FAILED */ |
| if ((disc_res == HCI_ERR_AUTH_FAILURE) || |
| (disc_res == HCI_ERR_KEY_MISSING) || |
| (disc_res == HCI_ERR_HOST_REJECT_SECURITY) || |
| (disc_res == HCI_ERR_PAIRING_NOT_ALLOWED) || |
| (disc_res == HCI_ERR_UNIT_KEY_USED) || |
| (disc_res == HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED) || |
| (disc_res == HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE) || |
| (disc_res == HCI_ERR_REPEATED_ATTEMPTS)) |
| { |
| hid_close_evt_reason = HID_ERR_AUTH_FAILED; |
| } |
| |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, hid_close_evt_reason, NULL ) ; |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_disconnect_cfm |
| ** |
| ** Description This function handles a disconnect confirm event from L2CAP. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_disconnect_cfm (UINT16 l2cap_cid, UINT16 result) |
| { |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| UNUSED(result); |
| |
| /* Find CCB based on CID */ |
| if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES ) |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| |
| if (p_hcon == NULL) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd L2CAP disc cfm, unknown CID: 0x%x", l2cap_cid); |
| return; |
| } |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd L2CAP disc cfm, CID: 0x%x", l2cap_cid); |
| |
| if (l2cap_cid == p_hcon->ctrl_cid) |
| p_hcon->ctrl_cid = 0; |
| else |
| { |
| p_hcon->intr_cid = 0; |
| if (p_hcon->ctrl_cid) |
| { |
| HIDH_TRACE_EVENT ("HID-Host Initiating L2CAP Ctrl disconnection"); |
| L2CA_DisconnectReq (p_hcon->ctrl_cid); |
| } |
| } |
| |
| if ((p_hcon->ctrl_cid == 0) && (p_hcon->intr_cid == 0)) |
| { |
| hh_cb.devices[dhandle].state = HID_DEV_NO_CONN; |
| p_hcon->conn_state = HID_CONN_STATE_UNUSED; |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, p_hcon->disc_reason, NULL ) ; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_cong_ind |
| ** |
| ** Description This function handles a congestion status event from L2CAP. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_cong_ind (UINT16 l2cap_cid, BOOLEAN congested) |
| { |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| |
| /* Find CCB based on CID */ |
| if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES ) |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| |
| if (p_hcon == NULL) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd L2CAP congestion status, unknown CID: 0x%x", l2cap_cid); |
| return; |
| } |
| |
| HIDH_TRACE_EVENT ("HID-Host Rcvd L2CAP congestion status, CID: 0x%x Cong: %d", l2cap_cid, congested); |
| |
| if (congested) |
| p_hcon->conn_flags |= HID_CONN_FLAGS_CONGESTED; |
| else |
| { |
| p_hcon->conn_flags &= ~HID_CONN_FLAGS_CONGESTED; |
| |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_l2cif_data_ind |
| ** |
| ** Description This function is called when data is received from L2CAP. |
| ** if we are the originator of the connection, we are the SDP |
| ** client, and the received message is queued up for the client. |
| ** |
| ** If we are the destination of the connection, we are the SDP |
| ** server, so the message is passed to the server processing |
| ** function. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_l2cif_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg) |
| { |
| UINT8 *p_data = (UINT8 *)(p_msg + 1) + p_msg->offset; |
| UINT8 ttype, param, rep_type, evt; |
| UINT8 dhandle; |
| tHID_CONN *p_hcon = NULL; |
| |
| HIDH_TRACE_DEBUG ("HID-Host hidh_l2cif_data_ind [l2cap_cid=0x%04x]", l2cap_cid); |
| |
| /* Find CCB based on CID */ |
| if ((dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES) |
| p_hcon = &hh_cb.devices[dhandle].conn; |
| |
| if (p_hcon == NULL) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Rcvd L2CAP data, unknown CID: 0x%x", l2cap_cid); |
| GKI_freebuf (p_msg); |
| return; |
| } |
| |
| |
| ttype = HID_GET_TRANS_FROM_HDR(*p_data); |
| param = HID_GET_PARAM_FROM_HDR(*p_data); |
| rep_type = param & HID_PAR_REP_TYPE_MASK; |
| p_data++; |
| |
| /* Get rid of the data type */ |
| p_msg->len--; |
| p_msg->offset++; |
| |
| switch (ttype) |
| { |
| case HID_TRANS_HANDSHAKE: |
| hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_HANDSHAKE, param, NULL); |
| GKI_freebuf (p_msg); |
| break; |
| |
| case HID_TRANS_CONTROL: |
| switch (param) |
| { |
| case HID_PAR_CONTROL_VIRTUAL_CABLE_UNPLUG: |
| hidh_conn_disconnect( dhandle ) ; |
| /* Device is unplugging from us. Tell USB */ |
| hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_VC_UNPLUG, 0, NULL); |
| break; |
| |
| default: |
| break; |
| } |
| GKI_freebuf (p_msg); |
| break; |
| |
| |
| case HID_TRANS_DATA: |
| evt = (hh_cb.devices[dhandle].conn.intr_cid == l2cap_cid) ? |
| HID_HDEV_EVT_INTR_DATA : HID_HDEV_EVT_CTRL_DATA; |
| hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, evt, rep_type, p_msg); |
| break; |
| |
| case HID_TRANS_DATAC: |
| evt = (hh_cb.devices[dhandle].conn.intr_cid == l2cap_cid) ? |
| HID_HDEV_EVT_INTR_DATC : HID_HDEV_EVT_CTRL_DATC; |
| hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, evt, rep_type, p_msg); |
| break; |
| |
| default: |
| GKI_freebuf (p_msg); |
| break; |
| } |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_conn_snd_data |
| ** |
| ** Description This function is sends out data. |
| ** |
| ** Returns tHID_STATUS |
| ** |
| *******************************************************************************/ |
| tHID_STATUS hidh_conn_snd_data (UINT8 dhandle, UINT8 trans_type, UINT8 param, |
| UINT16 data, UINT8 report_id, BT_HDR *buf) |
| { |
| tHID_CONN *p_hcon = &hh_cb.devices[dhandle].conn; |
| BT_HDR *p_buf; |
| UINT8 *p_out; |
| UINT16 bytes_copied; |
| BOOLEAN seg_req = FALSE; |
| UINT16 data_size; |
| UINT16 cid; |
| UINT8 pool_id; |
| UINT8 use_data = 0 ; |
| BOOLEAN blank_datc = FALSE; |
| |
| if (!BTM_IsAclConnectionUp(hh_cb.devices[dhandle].addr, BT_TRANSPORT_BR_EDR)) |
| { |
| if (buf) |
| GKI_freebuf ((void *)buf); |
| return( HID_ERR_NO_CONNECTION ); |
| } |
| |
| if (p_hcon->conn_flags & HID_CONN_FLAGS_CONGESTED) |
| { |
| if (buf) |
| GKI_freebuf ((void *)buf); |
| return( HID_ERR_CONGESTED ); |
| } |
| |
| switch( trans_type ) |
| { |
| case HID_TRANS_CONTROL: |
| case HID_TRANS_GET_REPORT: |
| case HID_TRANS_SET_REPORT: |
| case HID_TRANS_GET_PROTOCOL: |
| case HID_TRANS_SET_PROTOCOL: |
| case HID_TRANS_GET_IDLE: |
| case HID_TRANS_SET_IDLE: |
| cid = p_hcon->ctrl_cid; |
| pool_id = HID_CONTROL_POOL_ID; |
| break; |
| case HID_TRANS_DATA: |
| cid = p_hcon->intr_cid; |
| pool_id = HID_INTERRUPT_POOL_ID; |
| break; |
| default: |
| return (HID_ERR_INVALID_PARAM) ; |
| } |
| |
| if( trans_type == HID_TRANS_SET_IDLE ) |
| use_data = 1; |
| else if( (trans_type == HID_TRANS_GET_REPORT) && (param & 0x08) ) |
| use_data = 2; |
| |
| do |
| { |
| if ( buf == NULL || blank_datc ) |
| { |
| if((p_buf = (BT_HDR *)GKI_getpoolbuf (pool_id)) == NULL) |
| return (HID_ERR_NO_RESOURCES); |
| |
| p_buf->offset = L2CAP_MIN_OFFSET; |
| seg_req = FALSE; |
| data_size = 0; |
| bytes_copied = 0; |
| blank_datc = FALSE; |
| } |
| else if ( (buf->len > (p_hcon->rem_mtu_size - 1))) |
| { |
| if((p_buf = (BT_HDR *)GKI_getpoolbuf (pool_id)) == NULL) |
| return (HID_ERR_NO_RESOURCES); |
| |
| p_buf->offset = L2CAP_MIN_OFFSET; |
| seg_req = TRUE; |
| data_size = buf->len; |
| bytes_copied = p_hcon->rem_mtu_size - 1; |
| } |
| else |
| { |
| p_buf = buf ; |
| p_buf->offset -= 1; |
| seg_req = FALSE; |
| data_size = buf->len; |
| bytes_copied = buf->len; |
| } |
| |
| p_out = (UINT8 *)(p_buf + 1) + p_buf->offset; |
| *p_out++ = HID_BUILD_HDR(trans_type, param); |
| |
| /* If report ID required for this device */ |
| if( (trans_type == HID_TRANS_GET_REPORT) && (report_id != 0) ) |
| { |
| *p_out = report_id; |
| data_size = bytes_copied = 1; |
| } |
| |
| |
| if (seg_req) |
| { |
| memcpy (p_out, (((UINT8 *)(buf+1)) + buf->offset), bytes_copied); |
| buf->offset += bytes_copied; |
| buf->len -= bytes_copied; |
| } |
| else if( use_data == 1) |
| { |
| *(p_out+bytes_copied) = data & 0xff; |
| } |
| else if( use_data == 2 ) |
| { |
| *(p_out+bytes_copied) = data & 0xff; |
| *(p_out+bytes_copied+1) = (data >> 8) & 0xff ; |
| } |
| |
| p_buf->len = bytes_copied + 1 + use_data; |
| data_size -= bytes_copied; |
| |
| /* Send the buffer through L2CAP */ |
| if ((p_hcon->conn_flags & HID_CONN_FLAGS_CONGESTED) || (!L2CA_DataWrite (cid, p_buf))) |
| return (HID_ERR_CONGESTED); |
| |
| if (data_size) |
| trans_type = HID_TRANS_DATAC; |
| else if( bytes_copied == (p_hcon->rem_mtu_size - 1) ) |
| { |
| trans_type = HID_TRANS_DATAC; |
| blank_datc = TRUE; |
| } |
| |
| } while ((data_size != 0) || blank_datc ) ; |
| |
| return (HID_SUCCESS); |
| } |
| /******************************************************************************* |
| ** |
| ** Function hidh_conn_initiate |
| ** |
| ** Description This function is called by the management to create a connection. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tHID_STATUS hidh_conn_initiate (UINT8 dhandle) |
| { |
| UINT8 service_id = BTM_SEC_SERVICE_HIDH_NOSEC_CTRL; |
| UINT32 mx_chan_id = HID_NOSEC_CHN; |
| |
| tHID_HOST_DEV_CTB *p_dev = &hh_cb.devices[dhandle]; |
| |
| if( p_dev->conn.conn_state != HID_CONN_STATE_UNUSED ) |
| return( HID_ERR_CONN_IN_PROCESS ); |
| |
| p_dev->conn.ctrl_cid = 0; |
| p_dev->conn.intr_cid = 0; |
| p_dev->conn.disc_reason = HID_L2CAP_CONN_FAIL; /* Reset initial reason for CLOSE_EVT: Connection Attempt was made but failed */ |
| |
| /* We are the originator of this connection */ |
| p_dev->conn.conn_flags = HID_CONN_FLAGS_IS_ORIG; |
| |
| if(p_dev->attr_mask & HID_SEC_REQUIRED) |
| { |
| service_id = BTM_SEC_SERVICE_HIDH_SEC_CTRL; |
| mx_chan_id = HID_SEC_CHN; |
| } |
| BTM_SetOutService (p_dev->addr, service_id, mx_chan_id); |
| |
| /* Check if L2CAP started the connection process */ |
| if ((p_dev->conn.ctrl_cid = L2CA_ConnectReq (HID_PSM_CONTROL, p_dev->addr)) == 0) |
| { |
| HIDH_TRACE_WARNING ("HID-Host Originate failed"); |
| hh_cb.callback( dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE, |
| HID_ERR_L2CAP_FAILED, NULL ) ; |
| } |
| else |
| { |
| /* Transition to the next appropriate state, waiting for connection confirm on control channel. */ |
| p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_CTRL; |
| } |
| |
| return( HID_SUCCESS ); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function find_conn_by_cid |
| ** |
| ** Description This function finds a connection control block based on CID |
| ** |
| ** Returns address of control block, or NULL if not found |
| ** |
| *******************************************************************************/ |
| static UINT8 find_conn_by_cid (UINT16 cid) |
| { |
| UINT8 xx; |
| |
| for (xx = 0; xx < HID_HOST_MAX_DEVICES; xx++) |
| { |
| if ((hh_cb.devices[xx].in_use) && (hh_cb.devices[xx].conn.conn_state != HID_CONN_STATE_UNUSED) |
| && ((hh_cb.devices[xx].conn.ctrl_cid == cid) || (hh_cb.devices[xx].conn.intr_cid == cid))) |
| break; |
| } |
| |
| return (xx); |
| } |
| |
| void hidh_conn_dereg( void ) |
| { |
| L2CA_Deregister (HID_PSM_CONTROL); |
| L2CA_Deregister (HID_PSM_INTERRUPT); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function hidh_conn_retry |
| ** |
| ** Description This function is called to retry a failed connection. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void hidh_conn_retry( UINT8 dhandle ) |
| { |
| tHID_HOST_DEV_CTB *p_dev = &hh_cb.devices[dhandle]; |
| |
| p_dev->conn.conn_state = HID_CONN_STATE_UNUSED; |
| p_dev->conn.timer_entry.param = (UINT32) dhandle; |
| #if (HID_HOST_REPAGE_WIN > 0) |
| btu_start_timer (&(p_dev->conn.timer_entry), BTU_TTYPE_HID_HOST_REPAGE_TO, HID_HOST_REPAGE_WIN); |
| #else |
| hidh_proc_repage_timeout( &(p_dev->conn.timer_entry) ); |
| #endif |
| } |
