blob: 28a1db8ef00a3d0df08e29ad26c791d5d19c0cfb [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains functions for BLE whitelist operation.
*
******************************************************************************/
#include <string.h>
#include "bt_types.h"
#include "btu.h"
#include "btm_int.h"
#include "l2c_int.h"
#include "hcimsgs.h"
#include "bt_utils.h"
#include "vendor_ble.h"
#ifndef BTM_BLE_SCAN_PARAM_TOUT
#define BTM_BLE_SCAN_PARAM_TOUT 50 /* 50 seconds */
#endif
#if (BLE_INCLUDED == TRUE)
static void btm_suspend_wl_activity(tBTM_BLE_WL_STATE wl_state);
static void btm_resume_wl_activity(tBTM_BLE_WL_STATE wl_state);
/*******************************************************************************
**
** Function btm_update_scanner_filter_policy
**
** Description This function update the filter policy of scnner or advertiser.
*******************************************************************************/
void btm_update_scanner_filter_policy(tBTM_BLE_SFP scan_policy)
{
tBTM_BLE_INQ_CB *p_inq = &btm_cb.ble_ctr_cb.inq_var;
BTM_TRACE_EVENT ("btm_update_scanner_filter_policy");
p_inq->sfp = scan_policy;
p_inq->scan_type = (p_inq->scan_type == BTM_BLE_SCAN_MODE_NONE) ? BTM_BLE_SCAN_MODE_ACTI: p_inq->scan_type;
btsnd_hcic_ble_set_scan_params (p_inq->scan_type,
(UINT16)(!p_inq->scan_interval ? BTM_BLE_GAP_DISC_SCAN_INT : p_inq->scan_interval),
(UINT16)(!p_inq->scan_window ? BTM_BLE_GAP_DISC_SCAN_WIN : p_inq->scan_window),
btm_cb.ble_ctr_cb.addr_mgnt_cb.own_addr_type,
scan_policy);
}
/*******************************************************************************
**
** Function btm_add_dev_to_controller
**
** Description This function load the device into controller white list
*******************************************************************************/
BOOLEAN btm_add_dev_to_controller (BOOLEAN to_add, BD_ADDR bd_addr)
{
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
tBLE_ADDR_TYPE addr_type = BLE_ADDR_PUBLIC;
BOOLEAN started = FALSE;
BD_ADDR dummy_bda = {0};
tBT_DEVICE_TYPE dev_type;
if (p_dev_rec != NULL &&
p_dev_rec->device_type == BT_DEVICE_TYPE_BLE)
{
if (to_add)
{
if (p_dev_rec->ble.ble_addr_type == BLE_ADDR_PUBLIC || !BTM_BLE_IS_RESOLVE_BDA(bd_addr))
{
#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
/* add device into IRK list */
btm_ble_vendor_irk_list_load_dev(p_dev_rec);
#endif
started = btsnd_hcic_ble_add_white_list (p_dev_rec->ble.ble_addr_type, bd_addr);
}
if (memcmp(p_dev_rec->ble.static_addr, bd_addr, BD_ADDR_LEN) != 0 &&
memcmp(p_dev_rec->ble.static_addr, dummy_bda, BD_ADDR_LEN) != 0)
{
started = btsnd_hcic_ble_add_white_list (p_dev_rec->ble.static_addr_type,
p_dev_rec->ble.static_addr);
}
}
else
{
if (p_dev_rec->ble.ble_addr_type == BLE_ADDR_PUBLIC || !BTM_BLE_IS_RESOLVE_BDA(bd_addr))
{
started = btsnd_hcic_ble_remove_from_white_list (p_dev_rec->ble.ble_addr_type, bd_addr);
}
if (memcmp(p_dev_rec->ble.static_addr, dummy_bda, BD_ADDR_LEN) != 0 &&
memcmp(p_dev_rec->ble.static_addr, bd_addr, BD_ADDR_LEN) != 0)
{
started = btsnd_hcic_ble_remove_from_white_list (p_dev_rec->ble.static_addr_type, p_dev_rec->ble.static_addr);
}
}
} /* if not a known device, shall we add it? */
else
{
BTM_ReadDevInfo(bd_addr, &dev_type, &addr_type);
if (to_add)
started = btsnd_hcic_ble_add_white_list (addr_type, bd_addr);
else
started = btsnd_hcic_ble_remove_from_white_list (addr_type, bd_addr);
}
return started;
}
/*******************************************************************************
**
** Function btm_execute_wl_dev_operation
**
** Description execute the pending whitelist device operation(loading or removing)
*******************************************************************************/
BOOLEAN btm_execute_wl_dev_operation(void)
{
tBTM_BLE_WL_OP *p_dev_op = btm_cb.ble_ctr_cb.wl_op_q;
UINT8 i = 0;
BOOLEAN rt = TRUE;
for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM && rt; i ++, p_dev_op ++)
{
if (p_dev_op->in_use)
{
rt = btm_add_dev_to_controller(p_dev_op->to_add, p_dev_op->bd_addr);
memset(p_dev_op, 0, sizeof(tBTM_BLE_WL_OP));
}
else
break;
}
return rt;
}
/*******************************************************************************
**
** Function btm_enq_wl_dev_operation
**
** Description enqueue the pending whitelist device operation(loading or removing).
*******************************************************************************/
void btm_enq_wl_dev_operation(BOOLEAN to_add, BD_ADDR bd_addr)
{
tBTM_BLE_WL_OP *p_dev_op = btm_cb.ble_ctr_cb.wl_op_q;
UINT8 i = 0;
for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM; i ++, p_dev_op ++)
{
if (p_dev_op->in_use && !memcmp(p_dev_op->bd_addr, bd_addr, BD_ADDR_LEN))
{
p_dev_op->to_add = to_add;
return;
}
else if (!p_dev_op->in_use)
break;
}
if (i != BTM_BLE_MAX_BG_CONN_DEV_NUM)
{
p_dev_op->in_use = TRUE;
p_dev_op->to_add = to_add;
memcpy(p_dev_op->bd_addr, bd_addr, BD_ADDR_LEN);
}
else
{
BTM_TRACE_ERROR("max pending WL operation reached, discard");
}
return;
}
/*******************************************************************************
**
** Function btm_update_dev_to_white_list
**
** Description This function adds a device into white list.
*******************************************************************************/
BOOLEAN btm_update_dev_to_white_list(BOOLEAN to_add, BD_ADDR bd_addr)
{
/* look up the sec device record, and find the address */
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
UINT8 wl_state = p_cb->wl_state;
if ((to_add && p_cb->num_empty_filter == 0) ||
(!to_add && p_cb->num_empty_filter == p_cb->max_filter_entries))
{
BTM_TRACE_ERROR("WL full or empty, unable to update to WL. num_entry available: %d",
p_cb->num_empty_filter);
return FALSE;
}
btm_suspend_wl_activity(wl_state);
/* enq pending WL device operation */
btm_enq_wl_dev_operation(to_add, bd_addr);
btm_resume_wl_activity(wl_state);
return TRUE;
}
/*******************************************************************************
**
** Function btm_ble_clear_white_list
**
** Description This function clears the white list.
*******************************************************************************/
void btm_ble_clear_white_list (void)
{
BTM_TRACE_EVENT ("btm_ble_clear_white_list");
btsnd_hcic_ble_clear_white_list();
memset(&btm_cb.ble_ctr_cb.bg_dev_list, 0, (sizeof(tBTM_LE_BG_CONN_DEV)*BTM_BLE_MAX_BG_CONN_DEV_NUM));
}
/*******************************************************************************
**
** Function btm_ble_clear_white_list_complete
**
** Description This function clears the white list complete.
*******************************************************************************/
void btm_ble_clear_white_list_complete(UINT8 *p_data, UINT16 evt_len)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
UINT8 status;
UNUSED(evt_len);
BTM_TRACE_EVENT ("btm_ble_clear_white_list_complete");
STREAM_TO_UINT8 (status, p_data);
if (status == HCI_SUCCESS)
p_cb->num_empty_filter = p_cb->max_filter_entries;
}
/*******************************************************************************
**
** Function btm_ble_add_2_white_list_complete
**
** Description This function read the current white list size.
*******************************************************************************/
void btm_ble_add_2_white_list_complete(UINT8 status)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
BTM_TRACE_EVENT ("btm_ble_add_2_white_list_complete");
if (status == HCI_SUCCESS)
{
p_cb->num_empty_filter --;
}
}
/*******************************************************************************
**
** Function btm_ble_remove_from_white_list_complete
**
** Description This function remove the white list element complete.
*******************************************************************************/
void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
UNUSED(evt_len);
BTM_TRACE_EVENT ("btm_ble_remove_from_white_list_complete");
if (*p == HCI_SUCCESS)
{
p_cb->num_empty_filter ++;
}
}
/*******************************************************************************
**
** Function btm_ble_count_unconn_dev_in_whitelist
**
** Description This function find the number of un-connected background device
*******************************************************************************/
UINT8 btm_ble_count_unconn_dev_in_whitelist(void)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
UINT8 i, count = 0;
for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM; i ++)
{
if (p_cb->bg_dev_list[i].in_use &&
!BTM_IsAclConnectionUp(p_cb->bg_dev_list[i].bd_addr, BT_TRANSPORT_LE))
{
count ++;
}
}
return count;
}
/*******************************************************************************
**
** Function btm_update_bg_conn_list
**
** Description This function update the local background connection device list.
*******************************************************************************/
BOOLEAN btm_update_bg_conn_list(BOOLEAN to_add, BD_ADDR bd_addr)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
tBTM_LE_BG_CONN_DEV *p_bg_dev = &p_cb->bg_dev_list[0], *p_next, *p_cur;
UINT8 i, j;
BOOLEAN ret = FALSE;
BTM_TRACE_EVENT ("btm_update_bg_conn_list");
if ((to_add && (p_cb->bg_dev_num == BTM_BLE_MAX_BG_CONN_DEV_NUM || p_cb->num_empty_filter == 0)))
{
BTM_TRACE_DEBUG("num_empty_filter = %d", p_cb->num_empty_filter);
return ret;
}
for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM; i ++, p_bg_dev ++)
{
if (p_bg_dev->in_use && memcmp(p_bg_dev->bd_addr, bd_addr, BD_ADDR_LEN) == 0)
{
if (!to_add)
{
memset(p_bg_dev, 0, sizeof(tBTM_LE_BG_CONN_DEV));
p_cb->bg_dev_num --;
p_cur = p_bg_dev;
p_next = p_bg_dev + 1;
for (j = i + 1; j < BTM_BLE_MAX_BG_CONN_DEV_NUM && p_next->in_use;
j ++, p_cur ++, p_next ++)
{
memcpy(p_cur, p_next, sizeof(tBTM_LE_BG_CONN_DEV));
memset(p_next, 0, sizeof(tBTM_LE_BG_CONN_DEV));
}
}
ret = TRUE;
break;
}
else if (!p_bg_dev->in_use && to_add)
{
BTM_TRACE_DEBUG("add new WL entry in bg_dev_list");
memcpy(p_bg_dev->bd_addr, bd_addr, BD_ADDR_LEN);
p_bg_dev->in_use = TRUE;
p_cb->bg_dev_num ++;
ret = TRUE;
break;
}
}
return ret;
}
/*******************************************************************************
**
** Function btm_ble_start_auto_conn
**
** Description This function is to start/stop auto connection procedure.
**
** Parameters start: TRUE to start; FALSE to stop.
**
** Returns void
**
*******************************************************************************/
BOOLEAN btm_ble_start_auto_conn(BOOLEAN start)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
BD_ADDR dummy_bda = {0};
BOOLEAN exec = TRUE;
UINT16 scan_int, scan_win;
if (start)
{
if ( p_cb->conn_state == BLE_CONN_IDLE )
{
exec = btm_execute_wl_dev_operation();
}
if ((p_cb->conn_state == BLE_CONN_IDLE && btm_ble_count_unconn_dev_in_whitelist() > 0)
&& btm_ble_topology_check(BTM_BLE_STATE_INIT))
{
scan_int = (p_cb->scan_int == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_SCAN_SLOW_INT_1 : p_cb->scan_int;
scan_win = (p_cb->scan_win == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_SCAN_SLOW_WIN_1 : p_cb->scan_win;
if (!btsnd_hcic_ble_create_ll_conn (scan_int, /* UINT16 scan_int */
scan_win, /* UINT16 scan_win */
0x01, /* UINT8 white_list */
BLE_ADDR_PUBLIC, /* UINT8 addr_type_peer */
dummy_bda, /* BD_ADDR bda_peer */
p_cb->addr_mgnt_cb.own_addr_type,
/* UINT8 addr_type_own,
not allow random address for central */
BTM_BLE_CONN_INT_MIN_DEF, /* UINT16 conn_int_min */
BTM_BLE_CONN_INT_MAX_DEF, /* UINT16 conn_int_max */
BTM_BLE_CONN_SLAVE_LATENCY_DEF, /* UINT16 conn_latency */
BTM_BLE_CONN_TIMEOUT_DEF, /* UINT16 conn_timeout */
0, /* UINT16 min_len */
0)) /* UINT16 max_len */
{
/* start auto connection failed */
exec = FALSE;
}
else
{
btm_ble_set_conn_st (BLE_BG_CONN);
p_cb->wl_state |= BTM_BLE_WL_INIT;
}
}
else
{
exec = FALSE;
}
}
else
{
if (p_cb->conn_state == BLE_BG_CONN)
{
btsnd_hcic_ble_create_conn_cancel();
btm_ble_set_conn_st (BLE_CONN_CANCEL);
p_cb->wl_state |= BTM_BLE_WL_INIT;
#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
if (btm_cb.cmn_ble_vsc_cb.rpa_offloading == TRUE)
btm_ble_vendor_disable_irk_list();
#endif
}
else
{
#if 0
BTM_TRACE_ERROR("conn_st = %d, not in auto conn state, can not stop.", p_cb->conn_state);
exec = FALSE;
#endif
}
}
return exec;
}
/*******************************************************************************
**
** Function btm_ble_start_select_conn
**
** Description This function is to start/stop selective connection procedure.
**
** Parameters start: TRUE to start; FALSE to stop.
** p_select_cback: callback function to return application
** selection.
**
** Returns BOOLEAN: selective connectino procedure is started.
**
*******************************************************************************/
BOOLEAN btm_ble_start_select_conn(BOOLEAN start,tBTM_BLE_SEL_CBACK *p_select_cback)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
UINT16 scan_int, scan_win;
BTM_TRACE_EVENT ("btm_ble_start_select_conn");
scan_int = (p_cb->scan_int == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_SCAN_FAST_INT : p_cb->scan_int;
scan_win = (p_cb->scan_win == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_SCAN_FAST_WIN : p_cb->scan_win;
if (start)
{
if (!BTM_BLE_IS_SCAN_ACTIVE(p_cb->scan_activity))
{
if (p_select_cback != NULL)
btm_cb.ble_ctr_cb.p_select_cback = p_select_cback;
btm_execute_wl_dev_operation();
btm_update_scanner_filter_policy(SP_ADV_WL);
btm_cb.ble_ctr_cb.inq_var.scan_type = BTM_BLE_SCAN_MODE_PASS;
if (!btsnd_hcic_ble_set_scan_params(BTM_BLE_SCAN_MODE_PASS, /* use passive scan by default */
scan_int, /* scan interval */
scan_win, /* scan window */
p_cb->addr_mgnt_cb.own_addr_type,
SP_ADV_WL) /* process advertising packets only from devices in the White List */
)
return FALSE;
if (!btm_ble_topology_check(BTM_BLE_STATE_PASSIVE_SCAN))
{
BTM_TRACE_ERROR("peripheral device cannot initiate passive scan for a selective connection");
return FALSE;
}
else if (p_cb->bg_dev_num > 0 && btm_ble_count_unconn_dev_in_whitelist() > 0 )
{
if (!btsnd_hcic_ble_set_scan_enable(TRUE, TRUE)) /* duplicate filtering enabled */
return FALSE;
/* mark up inquiry status flag */
p_cb->scan_activity |= BTM_LE_SELECT_CONN_ACTIVE;
p_cb->wl_state |= BTM_BLE_WL_SCAN;
}
}
else
{
BTM_TRACE_ERROR("scan active, can not start selective connection procedure");
return FALSE;
}
}
else /* disable selective connection mode */
{
p_cb->scan_activity &= ~BTM_LE_SELECT_CONN_ACTIVE;
p_cb->p_select_cback = NULL;
#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
if (btm_cb.cmn_ble_vsc_cb.rpa_offloading == TRUE)
btm_ble_vendor_disable_irk_list();
#endif
p_cb->wl_state |= BTM_BLE_WL_SCAN;
/* stop scanning */
if (!BTM_BLE_IS_SCAN_ACTIVE(p_cb->scan_activity))
btm_ble_stop_scan(); /* duplicate filtering enabled */
btm_update_scanner_filter_policy(SP_ADV_ALL);
}
return TRUE;
}
/*******************************************************************************
**
** Function btm_ble_initiate_select_conn
**
** Description This function is to start/stop selective connection procedure.
**
** Parameters start: TRUE to start; FALSE to stop.
** p_select_cback: callback function to return application
** selection.
**
** Returns BOOLEAN: selective connectino procedure is started.
**
*******************************************************************************/
void btm_ble_initiate_select_conn(BD_ADDR bda)
{
BTM_TRACE_EVENT ("btm_ble_initiate_select_conn");
/* use direct connection procedure to initiate connection */
if (!L2CA_ConnectFixedChnl(L2CAP_ATT_CID, bda))
{
BTM_TRACE_ERROR("btm_ble_initiate_select_conn failed");
}
}
/*******************************************************************************
**
** Function btm_ble_suspend_bg_conn
**
** Description This function is to suspend an active background connection
** procedure.
**
** Parameters none.
**
** Returns none.
**
*******************************************************************************/
void btm_ble_suspend_bg_conn(void)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
BTM_TRACE_EVENT ("btm_ble_suspend_bg_conn");
if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
{
btm_ble_start_auto_conn(FALSE);
}
else if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
{
btm_ble_start_select_conn(FALSE, NULL);
}
}
/*******************************************************************************
**
** Function btm_suspend_wl_activity
**
** Description This function is to suspend white list related activity
**
** Returns none.
**
*******************************************************************************/
static void btm_suspend_wl_activity(tBTM_BLE_WL_STATE wl_state)
{
if (wl_state & BTM_BLE_WL_INIT)
{
btm_ble_start_auto_conn(FALSE);
}
if (wl_state & BTM_BLE_WL_SCAN)
{
btm_ble_start_select_conn(FALSE, NULL);
}
if (wl_state & BTM_BLE_WL_ADV)
{
btm_ble_stop_adv();
}
}
/*******************************************************************************
**
** Function btm_resume_wl_activity
**
** Description This function is to resume white list related activity
**
** Returns none.
**
*******************************************************************************/
static void btm_resume_wl_activity(tBTM_BLE_WL_STATE wl_state)
{
btm_ble_resume_bg_conn();
if (wl_state & BTM_BLE_WL_ADV)
{
btm_ble_start_adv();
}
}
/*******************************************************************************
**
** Function btm_ble_resume_bg_conn
**
** Description This function is to resume a background auto connection
** procedure.
**
** Parameters none.
**
** Returns none.
**
*******************************************************************************/
BOOLEAN btm_ble_resume_bg_conn(void)
{
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
BOOLEAN ret = FALSE;
if (p_cb->bg_conn_type != BTM_BLE_CONN_NONE)
{
if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
ret = btm_ble_start_auto_conn(TRUE);
if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
ret = btm_ble_start_select_conn(TRUE, btm_cb.ble_ctr_cb.p_select_cback);
}
return ret;
}
/*******************************************************************************
**
** Function btm_ble_get_conn_st
**
** Description This function get BLE connection state
**
** Returns connection state
**
*******************************************************************************/
tBTM_BLE_CONN_ST btm_ble_get_conn_st(void)
{
return btm_cb.ble_ctr_cb.conn_state;
}
/*******************************************************************************
**
** Function btm_ble_set_conn_st
**
** Description This function set BLE connection state
**
** Returns None.
**
*******************************************************************************/
void btm_ble_set_conn_st(tBTM_BLE_CONN_ST new_st)
{
btm_cb.ble_ctr_cb.conn_state = new_st;
if (new_st == BLE_BG_CONN || new_st == BLE_DIR_CONN) {
btm_cb.ble_ctr_cb.wl_state |= BTM_BLE_WL_INIT;
btm_ble_set_topology_mask(BTM_BLE_STATE_INIT_BIT);
} else {
btm_cb.ble_ctr_cb.wl_state &= ~BTM_BLE_WL_INIT;
btm_ble_clear_topology_mask(BTM_BLE_STATE_INIT_BIT);
}
}
/*******************************************************************************
**
** Function btm_ble_enqueue_direct_conn_req
**
** Description This function enqueue the direct connection request
**
** Returns None.
**
*******************************************************************************/
void btm_ble_enqueue_direct_conn_req(void *p_param)
{
tBTM_BLE_CONN_REQ *p = (tBTM_BLE_CONN_REQ *)GKI_getbuf(sizeof(tBTM_BLE_CONN_REQ));
p->p_param = p_param;
GKI_enqueue (&btm_cb.ble_ctr_cb.conn_pending_q, p);
}
/*******************************************************************************
**
** Function btm_send_pending_direct_conn
**
** Description This function send the pending direct connection request in queue
**
** Returns TRUE if started, FALSE otherwise
**
*******************************************************************************/
BOOLEAN btm_send_pending_direct_conn(void )
{
tBTM_BLE_CONN_REQ *p_req;
BOOLEAN rt = FALSE;
if ( btm_cb.ble_ctr_cb.conn_pending_q.count )
{
p_req = (tBTM_BLE_CONN_REQ*)GKI_dequeue (&btm_cb.ble_ctr_cb.conn_pending_q);
rt = l2cble_init_direct_conn((tL2C_LCB *)(p_req->p_param));
GKI_freebuf((void *)p_req);
}
return rt;
}
#endif