| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the public interface file for the HeaLth device profile (HL) |
| * subsystem of BTA, Broadcom's Bluetooth application layer for mobile |
| * phones. |
| * |
| ******************************************************************************/ |
| #ifndef BTA_HL_API_H |
| #define BTA_HL_API_H |
| |
| #include "bta_api.h" |
| #include "btm_api.h" |
| #include "mca_api.h" |
| |
| /***************************************************************************** |
| ** Constants and data types |
| *****************************************************************************/ |
| /* Extra Debug Code */ |
| #ifndef BTA_HL_DEBUG |
| #define BTA_HL_DEBUG TRUE |
| #endif |
| |
| #ifndef BTA_HL_NUM_APPS |
| #define BTA_HL_NUM_APPS 12 |
| #endif |
| |
| #ifndef BTA_HL_NUM_MDEPS |
| #define BTA_HL_NUM_MDEPS 13 |
| #endif |
| |
| #ifndef BTA_HL_NUM_MCLS |
| #define BTA_HL_NUM_MCLS 7 |
| #endif |
| |
| #ifndef BTA_HL_NUM_MDLS_PER_MDEP |
| #define BTA_HL_NUM_MDLS_PER_MDEP 4 |
| #endif |
| |
| #ifndef BTA_HL_NUM_MDLS_PER_MCL |
| #define BTA_HL_NUM_MDLS_PER_MCL 10 |
| #endif |
| |
| #ifndef BTA_HL_NUM_DATA_TYPES |
| #define BTA_HL_NUM_DATA_TYPES 5 /* maximum number of data types can be supported |
| per MDEP ID */ |
| #endif |
| |
| #define BTA_HL_MCAP_RSP_TOUT 2 /* 2 seconds */ |
| |
| #ifndef BTA_HL_CCH_NUM_FILTER_ELEMS |
| #define BTA_HL_CCH_NUM_FILTER_ELEMS 3 |
| #endif |
| |
| #ifndef BTA_HL_NUM_SDP_CBACKS |
| #define BTA_HL_NUM_SDP_CBACKS 7 |
| #endif |
| |
| #ifndef BTA_HL_NUM_SDP_RECS |
| #define BTA_HL_NUM_SDP_RECS 5 |
| #endif |
| |
| #ifndef BTA_HL_NUM_SDP_MDEPS |
| #define BTA_HL_NUM_SDP_MDEPS 12 |
| #endif |
| |
| #ifndef BTA_HL_NUM_SVC_ELEMS |
| #define BTA_HL_NUM_SVC_ELEMS 2 |
| #endif |
| |
| #ifndef BTA_HL_NUM_PROTO_ELEMS |
| #define BTA_HL_NUM_PROTO_ELEMS 2 |
| #endif |
| |
| #define BTA_HL_VERSION_01_00 0x0100 |
| #define BTA_HL_NUM_ADD_PROTO_LISTS 1 |
| #define BTA_HL_NUM_ADD_PROTO_ELEMS 2 |
| #define BTA_HL_MDEP_SEQ_SIZE 20 |
| #define BTA_HL_VAL_ARRY_SIZE 320 |
| |
| #ifndef BTA_HL_NUM_MDL_CFGS |
| #define BTA_HL_NUM_MDL_CFGS 16 /* numer of MDL cfg saved in the persistent memory*/ |
| #endif |
| |
| #define BTA_HL_NUM_TIMERS 7 |
| |
| #define BTA_HL_CCH_RSP_TOUT 2000 |
| #define BTA_HL_LRG_POOL_ID GKI_POOL_ID_7 |
| #define BTA_HL_MAX_TIME 255 |
| #define BTA_HL_MIN_TIME 1 |
| #define BTA_HL_INVALID_APP_HANDLE 0xFF |
| #define BTA_HL_INVALID_MCL_HANDLE 0xFF |
| #define BTA_HL_INVALID_MDL_HANDLE 0xFFFF |
| |
| #define BTA_HL_STATUS_OK 0 |
| #define BTA_HL_STATUS_FAIL 1 /* Used to pass all other errors */ |
| #define BTA_HL_STATUS_ABORTED 2 |
| #define BTA_HL_STATUS_NO_RESOURCE 3 |
| #define BTA_HL_STATUS_LAST_ITEM 4 |
| #define BTA_HL_STATUS_DUPLICATE_APP_ID 5 |
| #define BTA_HL_STATUS_INVALID_APP_HANDLE 6 |
| #define BTA_HL_STATUS_INVALID_MCL_HANDLE 7 |
| #define BTA_HL_STATUS_MCAP_REG_FAIL 8 |
| #define BTA_HL_STATUS_MDEP_CO_FAIL 9 |
| #define BTA_HL_STATUS_ECHO_CO_FAIL 10 |
| #define BTA_HL_STATUS_MDL_CFG_CO_FAIL 11 |
| #define BTA_HL_STATUS_SDP_NO_RESOURCE 12 |
| #define BTA_HL_STATUS_SDP_FAIL 13 |
| #define BTA_HL_STATUS_NO_CCH 14 |
| #define BTA_HL_STATUS_NO_MCL 15 |
| |
| #define BTA_HL_STATUS_NO_FIRST_RELIABLE 17 |
| #define BTA_HL_STATUS_INVALID_DCH_CFG 18 |
| #define BTA_HL_STATUS_INVALID_MDL_HANDLE 19 |
| #define BTA_HL_STATUS_INVALID_BD_ADDR 20 |
| #define BTA_HL_STATUS_INVALID_RECONNECT_CFG 21 |
| #define BTA_HL_STATUS_ECHO_TEST_BUSY 22 |
| #define BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID 23 |
| #define BTA_HL_STATUS_INVALID_MDL_ID 24 |
| #define BTA_HL_STATUS_NO_MDL_ID_FOUND 25 |
| #define BTA_HL_STATUS_DCH_BUSY 26 /* DCH is congested*/ |
| #define BTA_HL_STATUS_INVALID_CTRL_PSM 27 |
| #define BTA_HL_STATUS_DUPLICATE_CCH_OPEN 28 |
| |
| typedef UINT8 tBTA_HL_STATUS; |
| typedef tMCA_HANDLE tBTA_HL_APP_HANDLE; |
| typedef tMCA_CL tBTA_HL_MCL_HANDLE; |
| typedef tMCA_DL tBTA_HL_MDL_HANDLE; |
| enum |
| { |
| BTA_HL_DEVICE_TYPE_SINK, |
| BTA_HL_DEVICE_TYPE_SOURCE, |
| BTA_HL_DEVICE_TYPE_DUAL |
| }; |
| |
| typedef UINT8 tBTA_HL_DEVICE_TYPE; |
| |
| |
| |
| #define BTA_HL_SDP_IEEE_11073_20601 0x01 |
| |
| #define BTA_HL_MCAP_SUP_RECONNECT_MASK_INIT 2 /* 0x02 */ |
| #define BTA_HL_MCAP_SUP_RECONNECT_MASK_ACCEPT 4 /* 0x04 */ |
| #define BTA_HL_MCAP_SUP_CSP_MASK_SYNC_SLAVE 0 /* 0x08 */ |
| #define BTA_HL_MCAP_SUP_CSP_MASK_SYNC_MASTER 0 /* 0x10 */ |
| |
| #define BTA_HL_MCAP_SUP_PROC_MASK (BTA_HL_MCAP_SUP_RECONNECT_MASK_INIT | \ |
| BTA_HL_MCAP_SUP_RECONNECT_MASK_ACCEPT | \ |
| BTA_HL_MCAP_SUP_CSP_MASK_SYNC_SLAVE | \ |
| BTA_HL_MCAP_SUP_CSP_MASK_SYNC_MASTER) |
| #define BTA_HL_MDEP_ROLE_SOURCE 0x00 |
| #define BTA_HL_MDEP_ROLE_SINK 0x01 |
| |
| typedef UINT8 tBTA_HL_MDEP_ROLE; |
| |
| #define BTA_HL_MDEP_ROLE_MASK_SOURCE 0x01 /* bit mask */ |
| #define BTA_HL_MDEP_ROLE_MASK_SINK 0x02 |
| typedef UINT8 tBTA_HL_MDEP_ROLE_MASK; |
| |
| |
| #define BTA_HL_ECHO_TEST_MDEP_ID 0 |
| #define BTA_HL_ECHO_TEST_MDEP_CFG_IDX 0 |
| |
| #define BTA_HL_INVALID_MDEP_ID 0xFF |
| typedef tMCA_DEP tBTA_HL_MDEP_ID; /* 0 is for echo test, |
| 0x01-0x7F availave for use, |
| 0x80-0xFF reserved*/ |
| |
| |
| #define BTA_HL_DELETE_ALL_MDL_IDS 0xFFFF |
| #define BTA_HL_MAX_MDL_VAL 0xFEFF |
| typedef UINT16 tBTA_HL_MDL_ID; /* 0x0000 reserved, |
| 0x0001-0xFEFF dynamic range, |
| 0xFF00-0xFFFE reserved, |
| 0xFFFF indicates all MDLs*/ |
| |
| #define BTA_HL_MDEP_DESP_LEN 35 |
| |
| #define BTA_HL_DCH_MODE_RELIABLE 0 |
| #define BTA_HL_DCH_MODE_STREAMING 1 |
| |
| typedef UINT8 tBTA_HL_DCH_MODE; |
| |
| #define BTA_HL_DCH_CFG_NO_PREF 0 |
| #define BTA_HL_DCH_CFG_RELIABLE 1 |
| #define BTA_HL_DCH_CFG_STREAMING 2 |
| #define BTA_HL_DCH_CFG_UNKNOWN 0xFF |
| |
| typedef UINT8 tBTA_HL_DCH_CFG; |
| |
| /* The Default DCH CFG for the echo test when the device is a Source */ |
| #define BTA_HL_DEFAULT_ECHO_TEST_SRC_DCH_CFG BTA_HL_DCH_CFG_RELIABLE |
| |
| #define BTA_HL_DCH_CREATE_RSP_SUCCESS 0 |
| #define BTA_HL_DCH_CREATE_RSP_CFG_REJ 1 |
| |
| typedef UINT8 tBTA_HL_DCH_CREATE_RSP; |
| |
| #define BTA_HL_MCAP_SUP_PROC_RECONNECT_INIT 0x02 |
| #define BTA_HL_MCAP_SUP_PROC_RECONNECT_APT 0x04 |
| #define BTA_HL_MCAP_SUP_PROC_CSP_SLAVE 0x08 |
| #define BTA_HL_MCAP_SUP_PROC_CSP_MASTER 0x10 |
| |
| typedef UINT8 tBTA_HL_SUP_PROC_MASK; |
| |
| typedef struct |
| { |
| UINT16 max_rx_apdu_size; /* local rcv MTU */ |
| UINT16 max_tx_apdu_size; /* maximum TX APDU size*/ |
| } tBTA_HL_ECHO_CFG; |
| |
| |
| typedef struct |
| { |
| UINT16 data_type; |
| UINT16 max_rx_apdu_size; /* local rcv MTU */ |
| UINT16 max_tx_apdu_size; /* maximum TX APDU size*/ |
| char desp[BTA_HL_MDEP_DESP_LEN+1]; |
| } tBTA_HL_MDEP_DATA_TYPE_CFG; |
| |
| |
| typedef struct |
| { |
| tBTA_HL_MDEP_ROLE mdep_role; |
| UINT8 num_of_mdep_data_types; |
| tBTA_HL_MDEP_DATA_TYPE_CFG data_cfg[BTA_HL_NUM_DATA_TYPES]; |
| } tBTA_HL_MDEP_CFG; |
| |
| typedef struct |
| { |
| tBTA_HL_MDEP_ID mdep_id; /* MDEP ID 0x01-0x7F */ |
| tBTA_HL_MDEP_CFG mdep_cfg; |
| UINT8 ori_app_id; |
| } tBTA_HL_MDEP; |
| |
| typedef struct |
| { |
| tBTA_HL_MDEP mdep[BTA_HL_NUM_MDEPS]; |
| tBTA_HL_ECHO_CFG echo_cfg; |
| tBTA_HL_MDEP_ROLE_MASK app_role_mask; |
| BOOLEAN advertize_source_sdp; |
| UINT8 num_of_mdeps; |
| } tBTA_HL_SUP_FEATURE; |
| |
| typedef struct |
| { |
| BOOLEAN delete_req_pending; |
| tBTA_HL_MDL_ID mdl_id; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| } tBTA_HL_DELETE_MDL; |
| |
| typedef struct |
| { |
| UINT8 time; |
| UINT16 mtu; |
| tBTA_HL_MDL_ID mdl_id; |
| tBTA_HL_MDEP_ID local_mdep_id; |
| tBTA_HL_MDEP_ROLE local_mdep_role; |
| BOOLEAN active; /* true if this item is in use */ |
| tBTA_HL_DCH_MODE dch_mode; |
| UINT8 fcs; |
| BD_ADDR peer_bd_addr; |
| } tBTA_HL_MDL_CFG; |
| |
| |
| /* Maximum number of supported feature list items (list_elem in tSDP_SUP_FEATURE_ELEM) */ |
| #define BTA_HL_NUM_SUP_FEATURE_ELEMS 13 |
| #define BTA_HL_SUP_FEATURE_SDP_BUF_SIZE 512 |
| /* This structure is used to add supported feature lists and find supported feature elements */ |
| typedef struct |
| { |
| UINT8 mdep_id; |
| UINT16 data_type; |
| tBTA_HL_MDEP_ROLE mdep_role; |
| char *p_mdep_desp; |
| } tBTA_HL_SUP_FEATURE_ELEM; |
| |
| typedef struct |
| { |
| UINT16 num_elems; |
| tBTA_HL_SUP_FEATURE_ELEM list_elem[BTA_HL_NUM_SUP_FEATURE_ELEMS]; |
| } tBTA_HL_SUP_FEATURE_LIST_ELEM; |
| |
| |
| typedef struct |
| { |
| tBTA_HL_DEVICE_TYPE dev_type; /* sink, source or dual roles */ |
| tBTA_SEC sec_mask; /* security mask for accepting conenction*/ |
| const char *p_srv_name; /* service name to be used in the SDP; null terminated*/ |
| const char *p_srv_desp; /* service description to be used in the SDP; null terminated */ |
| const char *p_provider_name; /* provide name to be used in the SDP; null terminated */ |
| } tBTA_HL_REG_PARAM; |
| |
| typedef struct |
| { |
| UINT16 ctrl_psm; |
| BD_ADDR bd_addr; /* Address of peer device */ |
| tBTA_SEC sec_mask; /* security mask for initiating connection*/ |
| } tBTA_HL_CCH_OPEN_PARAM; |
| |
| |
| typedef struct |
| { |
| UINT16 ctrl_psm; |
| tBTA_HL_MDEP_ID local_mdep_id; /* local MDEP ID */ |
| tBTA_HL_MDEP_ID peer_mdep_id; /* peer mdep id */ |
| tBTA_HL_DCH_CFG local_cfg; |
| tBTA_SEC sec_mask; /* security mask for initiating connection*/ |
| } tBTA_HL_DCH_OPEN_PARAM; |
| |
| |
| typedef struct |
| { |
| UINT16 ctrl_psm; |
| tBTA_HL_MDL_ID mdl_id; |
| } tBTA_HL_DCH_RECONNECT_PARAM; |
| |
| |
| typedef struct |
| { |
| UINT16 ctrl_psm; |
| UINT16 pkt_size; |
| tBTA_HL_DCH_CFG local_cfg; |
| } tBTA_HL_DCH_ECHO_TEST_PARAM; |
| |
| typedef struct |
| { |
| UINT16 buf_size; |
| UINT8 p_buf; /* buffer pointer */ |
| } tBTA_HL_DCH_BUF_INFO; |
| |
| typedef struct |
| { |
| tBTA_HL_MDEP_ID local_mdep_id; /* local MDEP ID */ |
| tBTA_HL_MDL_ID mdl_id; |
| tBTA_HL_DCH_CREATE_RSP rsp_code; |
| tBTA_HL_DCH_CFG cfg_rsp; |
| } tBTA_HL_DCH_CREATE_RSP_PARAM; |
| |
| typedef struct |
| { |
| UINT16 data_type; |
| UINT8 mdep_id; |
| tBTA_HL_MDEP_ROLE mdep_role; |
| char mdep_desp[BTA_HL_MDEP_DESP_LEN+1]; |
| }tBTA_HL_SDP_MDEP_CFG; |
| |
| typedef struct |
| { |
| UINT16 ctrl_psm; |
| UINT16 data_psm; |
| UINT8 mcap_sup_proc; |
| UINT8 num_mdeps; /* number of mdep elements from SDP*/ |
| char srv_name[BTA_SERVICE_NAME_LEN+1]; |
| char srv_desp[BTA_SERVICE_DESP_LEN+1]; |
| char provider_name[BTA_PROVIDER_NAME_LEN+1]; |
| tBTA_HL_SDP_MDEP_CFG mdep_cfg[BTA_HL_NUM_SDP_MDEPS]; |
| } tBTA_HL_SDP_REC; |
| |
| typedef struct |
| { |
| UINT8 num_recs; |
| tBTA_HL_SDP_REC sdp_rec[BTA_HL_NUM_SDP_RECS]; |
| } tBTA_HL_SDP; |
| |
| /* HL control callback function events */ |
| enum |
| { |
| BTA_HL_CTRL_ENABLE_CFM_EVT = 0, |
| BTA_HL_CTRL_DISABLE_CFM_EVT |
| }; |
| typedef UINT8 tBTA_HL_CTRL_EVT; |
| /* Structure associated with BTA_HL_ENABLE_EVT |
| BTA_HL_DISABLE_EVT */ |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; |
| } tBTA_HL_CTRL_ENABLE_DISABLE; |
| |
| typedef union |
| { |
| tBTA_HL_CTRL_ENABLE_DISABLE enable_cfm; |
| tBTA_HL_CTRL_ENABLE_DISABLE disable_cfm; |
| } tBTA_HL_CTRL; |
| |
| /* HL instance callback function events */ |
| enum |
| { |
| BTA_HL_REGISTER_CFM_EVT =0, |
| BTA_HL_DEREGISTER_CFM_EVT, |
| BTA_HL_CCH_OPEN_IND_EVT, |
| BTA_HL_CCH_OPEN_CFM_EVT, |
| BTA_HL_CCH_CLOSE_IND_EVT, |
| BTA_HL_CCH_CLOSE_CFM_EVT, |
| BTA_HL_DCH_CREATE_IND_EVT, |
| BTA_HL_DCH_OPEN_IND_EVT, |
| BTA_HL_DCH_OPEN_CFM_EVT, |
| BTA_HL_DCH_CLOSE_IND_EVT, |
| BTA_HL_DCH_CLOSE_CFM_EVT, |
| BTA_HL_DCH_RECONNECT_IND_EVT, |
| BTA_HL_DCH_RECONNECT_CFM_EVT, |
| |
| BTA_HL_DCH_ABORT_IND_EVT, |
| BTA_HL_DCH_ABORT_CFM_EVT, |
| BTA_HL_DELETE_MDL_IND_EVT, |
| BTA_HL_DELETE_MDL_CFM_EVT, |
| BTA_HL_DCH_SEND_DATA_CFM_EVT, |
| BTA_HL_DCH_RCV_DATA_IND_EVT, |
| BTA_HL_CONG_CHG_IND_EVT, |
| BTA_HL_DCH_ECHO_TEST_CFM_EVT, |
| BTA_HL_SDP_QUERY_CFM_EVT, |
| BTA_HL_SDP_INFO_IND_EVT |
| }; |
| typedef UINT8 tBTA_HL_EVT; |
| |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; /* start status */ |
| UINT8 app_id; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_REGISTER_CFM; |
| |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; /* start status */ |
| UINT8 app_id; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_DEREGISTER_CFM; |
| |
| |
| typedef struct |
| { |
| BOOLEAN intentional; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_CCH_CLOSE_IND; |
| |
| |
| typedef struct |
| { |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_MCL_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; /* connection status */ |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_MCL_CFM; |
| |
| typedef struct |
| { |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| BD_ADDR bd_addr; /* address of peer device */ |
| } tBTA_HL_CCH_OPEN_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; /* connection status */ |
| UINT8 app_id; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| BD_ADDR bd_addr; /* address of peer device */ |
| } tBTA_HL_CCH_OPEN_CFM; |
| |
| typedef struct |
| { |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| tBTA_HL_MDEP_ID local_mdep_id; |
| tBTA_HL_MDL_ID mdl_id; /* MCAP data link ID for this |
| data channel conenction */ |
| tBTA_HL_DCH_CFG cfg; /* dch cfg requested by the peer device */ |
| BD_ADDR bd_addr; /* address of peer device */ |
| |
| } tBTA_HL_DCH_CREATE_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_MDL_HANDLE mdl_handle; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| tBTA_HL_MDEP_ID local_mdep_id; |
| tBTA_HL_MDL_ID mdl_id; /* MCAP data link ID for this |
| data channel conenction */ |
| tBTA_HL_DCH_MODE dch_mode; /* data channel mode - reliable or streaming*/ |
| |
| BOOLEAN first_reliable; /* whether this is the first reliable data channel */ |
| UINT16 mtu; |
| } tBTA_HL_DCH_OPEN_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; /* connection status */ |
| tBTA_HL_MDL_HANDLE mdl_handle; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| tBTA_HL_MDEP_ID local_mdep_id; |
| tBTA_HL_MDL_ID mdl_id; /* MCAP data link ID for this |
| data channel conenction */ |
| tBTA_HL_DCH_MODE dch_mode; /* data channel mode - reliable or streaming*/ |
| BOOLEAN first_reliable; /* whether this is the first reliable data channel */ |
| UINT16 mtu; |
| } tBTA_HL_DCH_OPEN_CFM; |
| |
| |
| typedef struct |
| { |
| BOOLEAN intentional; |
| tBTA_HL_MDL_HANDLE mdl_handle; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_DCH_CLOSE_IND; |
| |
| |
| typedef struct |
| { |
| tBTA_HL_MDL_HANDLE mdl_handle; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_MDL_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; |
| tBTA_HL_MDL_HANDLE mdl_handle; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| } tBTA_HL_MDL_CFM; |
| |
| typedef struct |
| { |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| tBTA_HL_MDL_ID mdl_id; |
| } tBTA_HL_DELETE_MDL_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| tBTA_HL_MDL_ID mdl_id; |
| } tBTA_HL_DELETE_MDL_CFM; |
| |
| typedef struct |
| { |
| tBTA_HL_MDL_HANDLE mdl_handle; |
| tBTA_HL_MCL_HANDLE mcl_handle; |
| tBTA_HL_APP_HANDLE app_handle; |
| BOOLEAN cong; |
| } tBTA_HL_DCH_CONG_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_APP_HANDLE app_handle; |
| UINT16 ctrl_psm; |
| UINT16 data_psm; |
| UINT8 data_x_spec; |
| UINT8 mcap_sup_procs; |
| } tBTA_HL_SDP_INFO_IND; |
| |
| typedef struct |
| { |
| tBTA_HL_STATUS status; |
| UINT8 app_id; |
| tBTA_HL_APP_HANDLE app_handle; |
| BD_ADDR bd_addr; |
| tBTA_HL_SDP *p_sdp; |
| } tBTA_HL_SDP_QUERY_CFM; |
| |
| typedef union |
| { |
| tBTA_HL_REGISTER_CFM reg_cfm; |
| tBTA_HL_DEREGISTER_CFM dereg_cfm; |
| tBTA_HL_CCH_OPEN_IND cch_open_ind; |
| tBTA_HL_CCH_OPEN_CFM cch_open_cfm; |
| tBTA_HL_CCH_CLOSE_IND cch_close_ind; |
| tBTA_HL_MCL_CFM cch_close_cfm; |
| tBTA_HL_DCH_CREATE_IND dch_create_ind; |
| tBTA_HL_DCH_OPEN_IND dch_open_ind; |
| tBTA_HL_DCH_OPEN_CFM dch_open_cfm; |
| tBTA_HL_DCH_CLOSE_IND dch_close_ind; |
| tBTA_HL_MDL_CFM dch_close_cfm; |
| tBTA_HL_DCH_OPEN_IND dch_reconnect_ind; |
| tBTA_HL_DCH_OPEN_CFM dch_reconnect_cfm; |
| tBTA_HL_MCL_IND dch_abort_ind; |
| tBTA_HL_MCL_CFM dch_abort_cfm; |
| tBTA_HL_DELETE_MDL_IND delete_mdl_ind; |
| tBTA_HL_DELETE_MDL_CFM delete_mdl_cfm; |
| tBTA_HL_MDL_CFM dch_send_data_cfm; |
| tBTA_HL_MDL_IND dch_rcv_data_ind; |
| tBTA_HL_DCH_CONG_IND dch_cong_ind; |
| tBTA_HL_MCL_CFM echo_test_cfm; |
| tBTA_HL_SDP_QUERY_CFM sdp_query_cfm; |
| tBTA_HL_SDP_INFO_IND sdp_info_ind; |
| |
| } tBTA_HL; |
| |
| /* HL callback functions */ |
| typedef void tBTA_HL_CTRL_CBACK(tBTA_HL_CTRL_EVT event, tBTA_HL_CTRL *p_data); |
| typedef void tBTA_HL_CBACK(tBTA_HL_EVT event, tBTA_HL *p_data); |
| |
| |
| /***************************************************************************** |
| ** External Function Declarations |
| *****************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| /************************** |
| ** API Functions |
| ***************************/ |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlEnable |
| ** |
| ** Description Enable the HL subsystems. This function must be |
| ** called before any other functions in the HL API are called. |
| ** When the enable operation is completed the callback function |
| ** will be called with an BTA_HL_CTRL_ENABLE_CFM_EVT event. |
| ** |
| ** Parameters p_cback - HL event call back function |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlEnable(tBTA_HL_CTRL_CBACK *p_ctrl_cback); |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDisable |
| ** |
| ** Description Disable the HL subsystem. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDisable(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlUpdate |
| ** |
| ** Description Register an HDP application |
| ** |
| ** Parameters app_id - Application ID |
| ** p_reg_param - non-platform related parameters for the |
| ** HDP application |
| ** p_cback - HL event callback fucntion |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlUpdate(UINT8 app_id, |
| tBTA_HL_REG_PARAM *p_reg_param, BOOLEAN is_register, |
| tBTA_HL_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlRegister |
| ** |
| ** Description Register a HDP application |
| ** |
| ** |
| ** Parameters app_id - hdp application ID |
| ** p_reg_param - non-platform related parameters for the |
| ** HDP application |
| ** p_cback - HL event callback fucntion |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlRegister(UINT8 app_id, |
| tBTA_HL_REG_PARAM *p_reg_param, |
| tBTA_HL_CBACK *p_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDeregister |
| ** |
| ** Description Deregister an HDP application |
| ** |
| ** Parameters app_handle - Application handle |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDeregister(UINT8 app_id,tBTA_HL_APP_HANDLE app_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlCchOpen |
| ** |
| ** Description Open a Control channel connection with the specified BD address |
| ** and the control PSM value is used to select which |
| ** HDP insatnce should be used in case the peer device support |
| ** multiple HDP instances. |
| ** |
| ** |
| ** Parameters app_handle - Application Handle |
| ** p_open_param - parameters for opening a control channel |
| ** |
| ** Returns void |
| ** |
| ** Note: If the control PSM value is zero then the first HDP |
| ** instance is used for the control channel setup |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlCchOpen(UINT8 app_id, tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_CCH_OPEN_PARAM *p_open_param); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlCchClose |
| ** |
| ** Description Close a Control channel connection with the specified MCL |
| ** handle |
| ** |
| ** Parameters mcl_handle - MCL handle |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlCchClose(tBTA_HL_MCL_HANDLE mcl_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDchOpen |
| ** |
| ** Description Open a data channel connection with the specified DCH parameters |
| ** |
| ** Parameters mcl_handle - MCL handle |
| ** p_open_param - parameters for opening a data channel |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDchOpen(tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_DCH_OPEN_PARAM *p_open_param); |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDchReconnect |
| ** |
| ** Description Reconnect a data channel with the specified MDL_ID |
| ** |
| ** Parameters mcl_handle - MCL handle |
| *8 p_recon_param - parameters for reconnecting a data channel |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDchReconnect(tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_DCH_RECONNECT_PARAM *p_recon_param); |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDchClose |
| ** |
| ** Description Close a data channel with the specified MDL handle |
| ** |
| ** Parameters mdl_handle - MDL handle |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDchClose(tBTA_HL_MDL_HANDLE mdl_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDchAbort |
| ** |
| ** Description Abort the current data channel setup with the specified MCL |
| ** handle |
| ** |
| ** Parameters mcl_handle - MCL handle |
| ** |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDchAbort(tBTA_HL_MCL_HANDLE mcl_handle); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlSendData |
| ** |
| ** Description Send an APDU to the peer device |
| ** |
| ** Parameters mdl_handle - MDL handle |
| ** pkt_size - size of the data packet to be sent |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlSendData(tBTA_HL_MDL_HANDLE mdl_handle, |
| UINT16 pkt_size); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDeleteMdl |
| ** |
| ** Description Delete the specified MDL_ID within the specified MCL handle |
| ** |
| ** Parameters mcl_handle - MCL handle |
| ** mdl_id - MDL ID |
| ** |
| ** Returns void |
| ** |
| ** note: If mdl_id = 0xFFFF then this means to delete all MDLs |
| ** and this value can only be used with DeleteMdl request only |
| ** not other requests |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDeleteMdl(tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_ID mdl_id ); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDchEchoTest |
| ** |
| ** Description Initiate an echo test with the specified MCL handle |
| ** |
| ** Parameters mcl_handle - MCL handle |
| *8 p_echo_test_param - parameters for echo testing |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDchEchoTest( tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_DCH_ECHO_TEST_PARAM *p_echo_test_param); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlSdpQuery |
| ** |
| ** Description SDP query request for the specified BD address |
| ** |
| ** Parameters app_id |
| app_handle - application handle |
| ** bd_addr - BD address |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlSdpQuery(UINT8 app_id,tBTA_HL_APP_HANDLE app_handle, |
| BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTA_HlDchCreateMdlRsp |
| ** |
| ** Description Set the Response and configuration values for the Create MDL |
| ** request |
| ** |
| ** Parameters mcl_handle - MCL handle |
| ** p_rsp_param - parameters specified whether the request should |
| ** be accepted or not and if it should be accepted |
| ** then it also specified the configuration response |
| ** value |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTA_API extern void BTA_HlDchCreateRsp(tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_DCH_CREATE_RSP_PARAM *p_rsp_param); |
| |
| |
| |
| #ifdef __cplusplus |
| |
| } |
| #endif |
| |
| #endif /* BTA_HL_API_H */ |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
