blob: 0400df4fa61c8356efd5992a2eab923db974a802 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains functions for BLE device control utilities, and LE
* security functions.
*
******************************************************************************/
#include <string.h>
#include "bt_types.h"
#include "hcimsgs.h"
#include "btu.h"
#include "btm_int.h"
#include "btm_ble_api.h"
#include "smp_api.h"
#include "l2c_int.h"
#include "gap_api.h"
#if SMP_INCLUDED == TRUE
extern BOOLEAN AES_CMAC ( BT_OCTET16 key, UINT8 *input, UINT16 length, UINT16 tlen, UINT8 *p_signature);
extern void smp_link_encrypted(BD_ADDR bda, UINT8 encr_enable);
extern BOOLEAN smp_proc_ltk_request(BD_ADDR bda);
#endif
extern void gatt_notify_enc_cmpl(BD_ADDR bd_addr);
/*******************************************************************************/
/* External Function to be called by other modules */
/*******************************************************************************/
/********************************************************
**
** Function BTM_SecAddBleDevice
**
** Description Add/modify device. This function will be normally called
** during host startup to restore all required information
** for a LE device stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** bd_name - Name of the peer device. NULL if unknown.
** dev_type - Remote device's device type.
** addr_type - LE device address type.
**
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name, tBT_DEVICE_TYPE dev_type,
tBLE_ADDR_TYPE addr_type)
{
#if BLE_INCLUDED == TRUE
tBTM_SEC_DEV_REC *p_dev_rec;
UINT8 i = 0;
tBTM_INQ_INFO *p_info=NULL;
BTM_TRACE_DEBUG1 ("BTM_SecAddBleDevice dev_type=0x%x", dev_type);
p_dev_rec = btm_find_dev (bd_addr);
if (!p_dev_rec)
{
BTM_TRACE_DEBUG0("Add a new device");
/* There is no device record, allocate one.
* If we can not find an empty spot for this one, let it fail. */
for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++)
{
if (!(btm_cb.sec_dev_rec[i].sec_flags & BTM_SEC_IN_USE))
{
BTM_TRACE_DEBUG1 ("allocate a new dev rec idx=0x%x ", i );
p_dev_rec = &btm_cb.sec_dev_rec[i];
/* Mark this record as in use and initialize */
memset (p_dev_rec, 0, sizeof (tBTM_SEC_DEV_REC));
p_dev_rec->sec_flags = BTM_SEC_IN_USE;
memcpy (p_dev_rec->bd_addr, bd_addr, BD_ADDR_LEN);
p_dev_rec->hci_handle = BTM_GetHCIConnHandle (bd_addr);
/* update conn params, use default value for background connection params */
p_dev_rec->conn_params.min_conn_int =
p_dev_rec->conn_params.max_conn_int =
p_dev_rec->conn_params.supervision_tout =
p_dev_rec->conn_params.slave_latency = BTM_BLE_CONN_PARAM_UNDEF;
BTM_TRACE_DEBUG1 ("hci_handl=0x%x ", p_dev_rec->hci_handle );
break;
}
}
if (!p_dev_rec)
return(FALSE);
}
else
{
BTM_TRACE_DEBUG0("Device already exist");
}
memset(p_dev_rec->sec_bd_name, 0, sizeof(tBTM_BD_NAME));
if (bd_name && bd_name[0])
{
p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
BCM_STRNCPY_S ((char *)p_dev_rec->sec_bd_name, sizeof (p_dev_rec->sec_bd_name),
(char *)bd_name, BTM_MAX_REM_BD_NAME_LEN);
}
p_dev_rec->device_type = dev_type;
p_dev_rec->ble.ble_addr_type = addr_type;
BTM_TRACE_DEBUG3 ("p_dev_rec->device_type =0x%x addr_type=0x%x sec_flags=0x%x",
dev_type, addr_type, p_dev_rec->sec_flags);
/* sync up with the Inq Data base*/
p_info = BTM_InqDbRead(bd_addr);
if (p_info)
{
p_info->results.ble_addr_type = p_dev_rec->ble.ble_addr_type ;
p_info->results.device_type = p_dev_rec->device_type;
BTM_TRACE_DEBUG2 ("InqDb device_type =0x%x addr_type=0x%x",
p_info->results.device_type, p_info->results.ble_addr_type);
}
#endif
return(TRUE);
}
/*******************************************************************************
**
** Function BTM_SecAddBleKey
**
** Description Add/modify LE device information. This function will be
** normally called during host startup to restore all required
** information stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** p_le_key - LE key values.
** key_type - LE SMP key type.
*
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, tBTM_LE_KEY_TYPE key_type)
{
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tBTM_SEC_DEV_REC *p_dev_rec;
BTM_TRACE_DEBUG0 ("BTM_SecAddBleKey");
p_dev_rec = btm_find_dev (bd_addr);
if (!p_dev_rec || !p_le_key ||
(key_type != BTM_LE_KEY_PENC && key_type != BTM_LE_KEY_PID &&
key_type != BTM_LE_KEY_PCSRK && key_type != BTM_LE_KEY_LENC &&
key_type != BTM_LE_KEY_LCSRK))
{
BTM_TRACE_WARNING3 ("BTM_SecAddBleKey() Wrong Type, or No Device record \
for bdaddr: %08x%04x, Type: %d",
(bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
(bd_addr[4]<<8)+bd_addr[5], key_type);
return(FALSE);
}
BTM_TRACE_DEBUG3 ("BTM_SecAddLeKey() BDA: %08x%04x, Type: 0x%02x",
(bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
(bd_addr[4]<<8)+bd_addr[5], key_type);
if (key_type == BTM_LE_KEY_PENC || key_type == BTM_LE_KEY_PID ||
key_type == BTM_LE_KEY_PCSRK || key_type == BTM_LE_KEY_LENC ||
key_type == BTM_LE_KEY_LCSRK)
{
btm_sec_save_le_key (bd_addr, key_type, p_le_key, FALSE);
}
#endif
return(TRUE);
}
/*******************************************************************************
**
** Function BTM_BleLoadLocalKeys
**
** Description Local local identity key, encryption root or sign counter.
**
** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER
** or BTM_BLE_KEY_TYPE_COUNTER.
** p_key: pointer to the key.
*
** Returns non2.
**
*******************************************************************************/
void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key)
{
#if BLE_INCLUDED == TRUE
tBTM_DEVCB *p_devcb = &btm_cb.devcb;
BTM_TRACE_DEBUG0 ("BTM_BleLoadLocalKeys");
if (p_key != NULL)
{
switch (key_type)
{
case BTM_BLE_KEY_TYPE_ID:
memcpy(&p_devcb->id_keys, &p_key->id_keys, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
break;
case BTM_BLE_KEY_TYPE_ER:
memcpy(p_devcb->er, p_key->er, sizeof(BT_OCTET16));
break;
default:
BTM_TRACE_ERROR1("unknow local key type: %d", key_type);
break;
}
}
#endif
}
/*******************************************************************************
**
** Function BTM_GetDeviceEncRoot
**
** Description This function is called to read the local device encryption
** root.
**
** Returns void
** the local device ER is copied into er
**
*******************************************************************************/
void BTM_GetDeviceEncRoot (BT_OCTET16 er)
{
BTM_TRACE_DEBUG0 ("BTM_GetDeviceEncRoot");
#if BLE_INCLUDED == TRUE
memcpy (er, btm_cb.devcb.er, BT_OCTET16_LEN);
#endif
}
/*******************************************************************************
**
** Function BTM_GetDeviceIDRoot
**
** Description This function is called to read the local device identity
** root.
**
** Returns void
** the local device IR is copied into irk
**
*******************************************************************************/
void BTM_GetDeviceIDRoot (BT_OCTET16 irk)
{
BTM_TRACE_DEBUG0 ("BTM_GetDeviceIDRoot ");
#if BLE_INCLUDED == TRUE
memcpy (irk, btm_cb.devcb.id_keys.irk, BT_OCTET16_LEN);
#endif
}
/*******************************************************************************
**
** Function BTM_GetDeviceDHK
**
** Description This function is called to read the local device DHK.
**
** Returns void
** the local device DHK is copied into dhk
**
*******************************************************************************/
void BTM_GetDeviceDHK (BT_OCTET16 dhk)
{
#if BLE_INCLUDED == TRUE
BTM_TRACE_DEBUG0 ("BTM_GetDeviceDHK");
memcpy (dhk, btm_cb.devcb.id_keys.dhk, BT_OCTET16_LEN);
#endif
}
/*******************************************************************************
**
** Function BTM_ReadConnectionAddr
**
** Description This function is called to get the local device address information
** .
**
** Returns void
**
*******************************************************************************/
void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr, tBLE_ADDR_TYPE *p_addr_type)
{
#if BLE_INCLUDED == TRUE
tACL_CONN *p_acl = btm_bda_to_acl(remote_bda);
if (p_acl == NULL)
{
BTM_TRACE_ERROR0("No connection exist!");
return;
}
memcpy(local_conn_addr, p_acl->conn_addr, BD_ADDR_LEN);
* p_addr_type = p_acl->conn_addr_type;
BTM_TRACE_DEBUG2 ("BTM_ReadConnectionAddr address type: %d addr: 0x%02x",
p_acl->conn_addr_type, p_acl->conn_addr[0]);
#endif
}
/*******************************************************************************
**
** Function BTM_ReadRemoteConnectionAddr
**
** Description This function is read the remote device address currently used
** .
**
** Returns void
**
*******************************************************************************/
BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, BD_ADDR conn_addr, tBLE_ADDR_TYPE *p_addr_type)
{
BOOLEAN st = TRUE;
#if BLE_INCLUDED == TRUE
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev(pseudo_addr);
memcpy(conn_addr, pseudo_addr, BD_ADDR_LEN);
*p_addr_type = p_dev_rec->ble.ble_addr_type;
#endif
return st;
}
/*******************************************************************************
**
** Function BTM_SecurityGrant
**
** Description This function is called to grant security process.
**
** Parameters bd_addr - peer device bd address.
** res - result of the operation BTM_SUCCESS if success.
** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts.
**
** Returns None
**
*******************************************************************************/
void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res)
{
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_REPEATED_ATTEMPTS;
BTM_TRACE_DEBUG0 ("BTM_SecurityGrant");
SMP_SecurityGrant(bd_addr, res_smp);
#endif
}
/*******************************************************************************
**
** Function BTM_BlePasskeyReply
**
** Description This function is called after Security Manager submitted
** passkey request to the application.
**
** Parameters: bd_addr - Address of the device for which passkey was requested
** res - result of the operation BTM_SUCCESS if success
** key_len - length in bytes of the Passkey
** p_passkey - pointer to array with the passkey
** trusted_mask - bitwise OR of trusted services (array of UINT32)
**
*******************************************************************************/
void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey)
{
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_PASSKEY_ENTRY_FAIL;
if (p_dev_rec == NULL)
{
BTM_TRACE_ERROR0("Passkey reply to Unknown device");
return;
}
p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
BTM_TRACE_DEBUG0 ("BTM_BlePasskeyReply");
SMP_PasskeyReply(bd_addr, res_smp, passkey);
#endif
}
/*******************************************************************************
**
** Function BTM_BleOobDataReply
**
** Description This function is called to provide the OOB data for
** SMP in response to BTM_LE_OOB_REQ_EVT
**
** Parameters: bd_addr - Address of the peer device
** res - result of the operation SMP_SUCCESS if success
** p_data - simple pairing Randomizer C.
**
*******************************************************************************/
void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data)
{
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_OOB_FAIL;
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
BTM_TRACE_DEBUG0 ("BTM_BleOobDataReply");
if (p_dev_rec == NULL)
{
BTM_TRACE_ERROR0("BTM_BleOobDataReply() to Unknown device");
return;
}
p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
SMP_OobDataReply(bd_addr, res_smp, len, p_data);
#endif
}
/******************************************************************************
**
** Function BTM_BleSetConnScanParams
**
** Description Set scan parameter used in BLE connection request
**
** Parameters: scan_interval: scan interval
** scan_window: scan window
**
** Returns void
**
*******************************************************************************/
void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window)
{
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tBTM_BLE_CB *p_ble_cb = &btm_cb.ble_ctr_cb;
BOOLEAN new_param = FALSE;
if (BTM_BLE_VALID_PRAM(scan_interval, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) &&
BTM_BLE_VALID_PRAM(scan_window, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX))
{
btu_stop_timer(&p_ble_cb->scan_param_idle_timer);
if (p_ble_cb->scan_int != scan_interval)
{
p_ble_cb->scan_int = scan_interval;
new_param = TRUE;
}
if (p_ble_cb->scan_win != scan_window)
{
p_ble_cb->scan_win = scan_window;
new_param = TRUE;
}
if (new_param && p_ble_cb->conn_state == BLE_BG_CONN)
{
btm_ble_suspend_bg_conn();
}
}
else
{
BTM_TRACE_ERROR0("Illegal Connection Scan Parameters");
}
#endif
}
/********************************************************
**
** Function BTM_BleSetPrefConnParams
**
** Description Set a peripheral's preferred connection parameters
**
** Parameters: bd_addr - BD address of the peripheral
** scan_interval: scan interval
** scan_window: scan window
** min_conn_int - minimum preferred connection interval
** max_conn_int - maximum preferred connection interval
** slave_latency - preferred slave latency
** supervision_tout - preferred supervision timeout
**
** Returns void
**
*******************************************************************************/
void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
UINT16 min_conn_int, UINT16 max_conn_int,
UINT16 slave_latency, UINT16 supervision_tout)
{
#if BLE_INCLUDED == TRUE
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
BTM_TRACE_API4 ("BTM_BleSetPrefConnParams min: %u max: %u latency: %u \
tout: %u",
min_conn_int, max_conn_int, slave_latency, supervision_tout);
if (BTM_BLE_VALID_PRAM(min_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
BTM_BLE_VALID_PRAM(max_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
BTM_BLE_VALID_PRAM(supervision_tout, BTM_BLE_CONN_SUP_TOUT_MIN, BTM_BLE_CONN_SUP_TOUT_MAX) &&
(slave_latency <= BTM_BLE_CONN_LATENCY_MAX || slave_latency == BTM_BLE_CONN_PARAM_UNDEF))
{
if (p_dev_rec)
{
/* expect conn int and stout and slave latency to be updated all together */
if (min_conn_int != BTM_BLE_CONN_PARAM_UNDEF || max_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
{
if (min_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
p_dev_rec->conn_params.min_conn_int = min_conn_int;
else
p_dev_rec->conn_params.min_conn_int = max_conn_int;
if (max_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
p_dev_rec->conn_params.max_conn_int = max_conn_int;
else
p_dev_rec->conn_params.max_conn_int = min_conn_int;
if (slave_latency != BTM_BLE_CONN_PARAM_UNDEF)
p_dev_rec->conn_params.slave_latency = slave_latency;
else
p_dev_rec->conn_params.slave_latency = BTM_BLE_CONN_SLAVE_LATENCY_DEF;
if (supervision_tout != BTM_BLE_CONN_PARAM_UNDEF)
p_dev_rec->conn_params.supervision_tout = supervision_tout;
else
p_dev_rec->conn_params.slave_latency = BTM_BLE_CONN_TIMEOUT_DEF;
}
}
else
{
BTM_TRACE_ERROR0("Unknown Device, setting rejected");
}
}
else
{
BTM_TRACE_ERROR0("Illegal Connection Parameters");
}
#endif /* BLE_INCLUDED */
}
/*******************************************************************************
**
** Function BTM_ReadDevInfo
**
** Description This function is called to read the device/address type
** of BD address.
**
** Parameter remote_bda: remote device address
** p_dev_type: output parameter to read the device type.
** p_addr_type: output parameter to read the address type.
**
*******************************************************************************/
void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, tBLE_ADDR_TYPE *p_addr_type)
{
#if BLE_INCLUDED == TRUE
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (remote_bda);
tBTM_INQ_INFO *p_inq_info = BTM_InqDbRead(remote_bda);
*p_dev_type = BT_DEVICE_TYPE_BREDR;
*p_addr_type = BLE_ADDR_PUBLIC;
if (!p_dev_rec)
{
/* Check with the BT manager if details about remote device are known */
if (p_inq_info != NULL)
{
*p_dev_type = p_inq_info->results.device_type ;
*p_addr_type = p_inq_info->results.ble_addr_type;
}
/* unknown device, assume BR/EDR */
}
else /* there is a security device record exisitng */
{
/* new inquiry result, overwrite device type in security device record */
if (p_inq_info)
{
p_dev_rec->device_type = p_inq_info->results.device_type;
p_dev_rec->ble.ble_addr_type = p_inq_info->results.ble_addr_type;
}
*p_dev_type = p_dev_rec->device_type;
*p_addr_type = p_dev_rec->ble.ble_addr_type;
}
BTM_TRACE_DEBUG2 ("btm_find_dev_type - device_type = %d addr_type = %d", *p_dev_type , *p_addr_type);
#endif
return;
}
/*******************************************************************************
**
** Function BTM_BleReceiverTest
**
** Description This function is called to start the LE Receiver test
**
** Parameter rx_freq - Frequency Range
** p_cmd_cmpl_cback - Command Complete callback
**
*******************************************************************************/
void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback)
{
btm_cb.devcb.p_le_test_cmd_cmpl_cb = p_cmd_cmpl_cback;
if (btsnd_hcic_ble_receiver_test(rx_freq) == FALSE)
{
BTM_TRACE_ERROR1("%s: Unable to Trigger LE receiver test", __FUNCTION__);
}
}
/*******************************************************************************
**
** Function BTM_BleTransmitterTest
**
** Description This function is called to start the LE Transmitter test
**
** Parameter tx_freq - Frequency Range
** test_data_len - Length in bytes of payload data in each packet
** packet_payload - Pattern to use in the payload
** p_cmd_cmpl_cback - Command Complete callback
**
*******************************************************************************/
void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len,
UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback)
{
btm_cb.devcb.p_le_test_cmd_cmpl_cb = p_cmd_cmpl_cback;
if (btsnd_hcic_ble_transmitter_test(tx_freq, test_data_len, packet_payload) == FALSE)
{
BTM_TRACE_ERROR1("%s: Unable to Trigger LE transmitter test", __FUNCTION__);
}
}
/*******************************************************************************
**
** Function BTM_BleTestEnd
**
** Description This function is called to stop the in-progress TX or RX test
**
** Parameter p_cmd_cmpl_cback - Command complete callback
**
*******************************************************************************/
void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback)
{
btm_cb.devcb.p_le_test_cmd_cmpl_cb = p_cmd_cmpl_cback;
if (btsnd_hcic_ble_test_end() == FALSE)
{
BTM_TRACE_ERROR1("%s: Unable to End the LE TX/RX test", __FUNCTION__);
}
}
/*******************************************************************************
** Internal Functions
*******************************************************************************/
#if BLE_INCLUDED == TRUE
void btm_ble_test_command_complete(UINT8 *p)
{
tBTM_CMPL_CB *p_cb = btm_cb.devcb.p_le_test_cmd_cmpl_cb;
UINT8 status;
btm_cb.devcb.p_le_test_cmd_cmpl_cb = NULL;
if (p_cb)
{
(*p_cb)(p);
}
}
/*******************************************************************************
**
** Function btm_ble_check_link_type
**
** Description This function is to check the link type is BLE or BR/EDR.
**
** Returns TRUE if BLE link; FALSE if BR/EDR.
**
*******************************************************************************/
BOOLEAN btm_ble_check_link_type (BD_ADDR bd_addr)
{
tACL_CONN *p;
BTM_TRACE_DEBUG0 ("btm_ble_check_link_type");
if ((p = btm_bda_to_acl(bd_addr)) != NULL)
return p->is_le_link;
else
return FALSE;
}
/*******************************************************************************
**
** Function btm_ble_rand_enc_complete
**
** Description This function is the callback functions for HCI_Rand command
** and HCI_Encrypt command is completed.
** This message is received from the HCI.
**
** Returns void
**
*******************************************************************************/
void btm_ble_rand_enc_complete (UINT8 *p, UINT16 op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback)
{
tBTM_RAND_ENC params;
UINT8 *p_dest = params.param_buf;
BTM_TRACE_DEBUG0 ("btm_ble_rand_enc_complete");
memset(&params, 0, sizeof(tBTM_RAND_ENC));
/* If there was a callback address for vcs complete, call it */
if (p_enc_cplt_cback && p)
{
/* Pass paramters to the callback function */
STREAM_TO_UINT8(params.status, p); /* command status */
if (params.status == HCI_SUCCESS)
{
params.opcode = op_code;
if (op_code == HCI_BLE_RAND)
params.param_len = BT_OCTET8_LEN;
else
params.param_len = BT_OCTET16_LEN;
memcpy(p_dest, p, params.param_len); /* Fetch return info from HCI event message */
}
if (p_enc_cplt_cback)
(*p_enc_cplt_cback)(&params); /* Call the Encryption complete callback function */
}
}
#if (SMP_INCLUDED == TRUE)
/*******************************************************************************
**
** Function btm_ble_get_enc_key_type
**
** Description This function is to increment local sign counter
** Returns None
**
*******************************************************************************/
void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, BOOLEAN is_local )
{
tBTM_SEC_DEV_REC *p_dev_rec;
BTM_TRACE_DEBUG1 ("btm_ble_increment_sign_ctr is_local=%d", is_local);
if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
{
if (is_local)
p_dev_rec->ble.keys.local_counter++;
else
p_dev_rec->ble.keys.counter++;
BTM_TRACE_DEBUG3 ("is_local=%d local sign counter=%d peer sign counter=%d",
is_local,
p_dev_rec->ble.keys.local_counter,
p_dev_rec->ble.keys.counter);
}
}
/*******************************************************************************
**
** Function btm_ble_get_enc_key_type
**
** Description This function is to get the BLE key type that has been exchanged
** in betweem local device and peer device.
**
** Returns p_key_type: output parameter to carry the key type value.
**
*******************************************************************************/
BOOLEAN btm_ble_get_enc_key_type(BD_ADDR bd_addr, UINT8 *p_key_types)
{
tBTM_SEC_DEV_REC *p_dev_rec;
BTM_TRACE_DEBUG0 ("btm_ble_get_enc_key_type");
if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
{
*p_key_types = p_dev_rec->ble.key_type;
return TRUE;
}
return FALSE;
}
/*******************************************************************************
**
** Function btm_get_local_div
**
** Description This function is called to read the local DIV
**
** Returns TURE - if a valid DIV is availavle
*******************************************************************************/
BOOLEAN btm_get_local_div (BD_ADDR bd_addr, UINT16 *p_div)
{
tBTM_SEC_DEV_REC *p_dev_rec;
BOOLEAN status = FALSE;
BTM_TRACE_DEBUG0 ("btm_get_local_div");
BTM_TRACE_DEBUG6("bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
bd_addr[0],bd_addr[1],
bd_addr[2],bd_addr[3],
bd_addr[4],bd_addr[5]);
p_dev_rec = btm_find_dev (bd_addr);
if (p_dev_rec && p_dev_rec->ble.keys.div)
{
status = TRUE;
*p_div = p_dev_rec->ble.keys.div;
}
BTM_TRACE_DEBUG2 ("btm_get_local_div status=%d (1-OK) DIV=0x%x", status, *p_div);
return status;
}
/*******************************************************************************
**
** Function btm_sec_save_le_key
**
** Description This function is called by the SMP to update
** an BLE key. SMP is internal, whereas all the keys shall
** be sent to the application. The function is also called
** when application passes ble key stored in NVRAM to the btm_sec.
** pass_to_application parameter is false in this case.
**
** Returns void
**
*******************************************************************************/
void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys,
BOOLEAN pass_to_application)
{
tBTM_SEC_DEV_REC *p_rec;
tBTM_LE_EVT_DATA cb_data;
UINT8 i;
BTM_TRACE_DEBUG2 ("btm_sec_save_le_key key_type=0x%x pass_to_application=%d",key_type, pass_to_application);
/* Store the updated key in the device database */
BTM_TRACE_DEBUG6("bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
bd_addr[0],bd_addr[1],
bd_addr[2],bd_addr[3],
bd_addr[4],bd_addr[5]);
if ((p_rec = btm_find_dev (bd_addr)) != NULL && p_keys)
{
switch (key_type)
{
case BTM_LE_KEY_PENC:
memcpy(p_rec->ble.keys.ltk, p_keys->penc_key.ltk, BT_OCTET16_LEN);
memcpy(p_rec->ble.keys.rand, p_keys->penc_key.rand, BT_OCTET8_LEN);
p_rec->ble.keys.sec_level = p_keys->penc_key.sec_level;
p_rec->ble.keys.ediv = p_keys->penc_key.ediv;
p_rec->ble.keys.key_size = p_keys->penc_key.key_size;
p_rec->ble.key_type |= BTM_LE_KEY_PENC;
p_rec->sec_flags |= BTM_SEC_LINK_KEY_KNOWN;
if (p_keys->penc_key.sec_level == SMP_SEC_AUTHENTICATED)
p_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
else
p_rec->sec_flags &= ~BTM_SEC_LINK_KEY_AUTHED;
BTM_TRACE_DEBUG3("BTM_LE_KEY_PENC key_type=0x%x sec_flags=0x%x sec_leve=0x%x",
p_rec->ble.key_type,
p_rec->sec_flags,
p_rec->ble.keys.sec_level);
break;
case BTM_LE_KEY_PID:
for (i=0; i<BT_OCTET16_LEN; i++)
{
p_rec->ble.keys.irk[i] = p_keys->pid_key.irk[i];
}
//memcpy( p_rec->ble.keys.irk, p_keys->pid_key, BT_OCTET16_LEN); todo will crash the system
memcpy(p_rec->ble.static_addr, p_keys->pid_key.static_addr, BD_ADDR_LEN);
p_rec->ble.static_addr_type = p_keys->pid_key.addr_type;
p_rec->ble.key_type |= BTM_LE_KEY_PID;
BTM_TRACE_DEBUG1("BTM_LE_KEY_PID key_type=0x%x save peer IRK", p_rec->ble.key_type);
break;
case BTM_LE_KEY_PCSRK:
memcpy(p_rec->ble.keys.csrk, p_keys->pcsrk_key.csrk, BT_OCTET16_LEN);
p_rec->ble.keys.srk_sec_level = p_keys->pcsrk_key.sec_level;
p_rec->ble.keys.counter = p_keys->pcsrk_key.counter;
p_rec->ble.key_type |= BTM_LE_KEY_PCSRK;
p_rec->sec_flags |= BTM_SEC_LINK_KEY_KNOWN;
if ( p_keys->pcsrk_key.sec_level== SMP_SEC_AUTHENTICATED)
p_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
else
p_rec->sec_flags &= ~BTM_SEC_LINK_KEY_AUTHED;
BTM_TRACE_DEBUG4("BTM_LE_KEY_PCSRK key_type=0x%x sec_flags=0x%x sec_level=0x%x peer_counter=%d",
p_rec->ble.key_type,
p_rec->sec_flags,
p_rec->ble.keys.srk_sec_level,
p_rec->ble.keys.counter );
break;
case BTM_LE_KEY_LENC:
p_rec->ble.keys.div = p_keys->lenc_key.div; /* update DIV */
p_rec->ble.keys.sec_level = p_keys->lenc_key.sec_level;
p_rec->ble.keys.key_size = p_keys->lenc_key.key_size;
p_rec->ble.key_type |= BTM_LE_KEY_LENC;
BTM_TRACE_DEBUG4("BTM_LE_KEY_LENC key_type=0x%x DIV=0x%x key_size=0x%x sec_level=0x%x",
p_rec->ble.key_type,
p_rec->ble.keys.div,
p_rec->ble.keys.key_size,
p_rec->ble.keys.sec_level );
break;
case BTM_LE_KEY_LCSRK:/* local CSRK has been delivered */
p_rec->ble.keys.div = p_keys->lcsrk_key.div; /* update DIV */
p_rec->ble.keys.local_csrk_sec_level = p_keys->lcsrk_key.sec_level;
p_rec->ble.keys.local_counter = p_keys->lcsrk_key.counter;
p_rec->ble.key_type |= BTM_LE_KEY_LCSRK;
BTM_TRACE_DEBUG4("BTM_LE_KEY_LCSRK key_type=0x%x DIV=0x%x scrk_sec_level=0x%x local_counter=%d",
p_rec->ble.key_type,
p_rec->ble.keys.div,
p_rec->ble.keys.local_csrk_sec_level,
p_rec->ble.keys.local_counter );
break;
default:
BTM_TRACE_WARNING1("btm_sec_save_le_key (Bad key_type 0x%02x)", key_type);
return;
}
BTM_TRACE_DEBUG3 ("BLE key type 0x%02x updated for BDA: %08x%04x (btm_sec_save_le_key)", key_type,
(bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
(bd_addr[4]<<8)+bd_addr[5]);
/* Notify the application that one of the BLE keys has been updated
If link key is in progress, it will get sent later.*/
if (pass_to_application && btm_cb.api.p_le_callback)
{
cb_data.key.p_key_value = p_keys;
cb_data.key.key_type = key_type;
(*btm_cb.api.p_le_callback) (BTM_LE_KEY_EVT, bd_addr, &cb_data);
}
return;
}
BTM_TRACE_WARNING3 ("BLE key type 0x%02x called for Unknown BDA or type: %08x%04x !! (btm_sec_save_le_key)", key_type,
(bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
(bd_addr[4]<<8)+bd_addr[5]);
if (p_rec)
{
BTM_TRACE_DEBUG1 ("sec_flags=0x%x", p_rec->sec_flags);
}
}
/*******************************************************************************
**
** Function btm_ble_update_sec_key_size
**
** Description update the current lin kencryption key size
**
** Returns void
**
*******************************************************************************/
void btm_ble_update_sec_key_size(BD_ADDR bd_addr, UINT8 enc_key_size)
{
tBTM_SEC_DEV_REC *p_rec;
BTM_TRACE_DEBUG1("btm_ble_update_sec_key_size enc_key_size = %d", enc_key_size);
if ((p_rec = btm_find_dev (bd_addr)) != NULL )
{
p_rec->enc_key_size = enc_key_size;
}
}
/*******************************************************************************
**
** Function btm_ble_read_sec_key_size
**
** Description update the current lin kencryption key size
**
** Returns void
**
*******************************************************************************/
UINT8 btm_ble_read_sec_key_size(BD_ADDR bd_addr)
{
tBTM_SEC_DEV_REC *p_rec;
if ((p_rec = btm_find_dev (bd_addr)) != NULL )
{
return p_rec->enc_key_size;
}
else
return 0;
}
/*******************************************************************************
**
** Function btm_ble_link_sec_check
**
** Description Check BLE link security level match.
**
** Returns TRUE: check is OK and the *p_sec_req_act contain the action
**
*******************************************************************************/
void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act)
{
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
UINT8 req_sec_level, cur_sec_level;
BTM_TRACE_DEBUG1 ("btm_ble_link_sec_check auth_req =0x%x", auth_req);
if (p_dev_rec == NULL)
{
BTM_TRACE_ERROR0 ("btm_ble_link_sec_check received for unknown device");
return;
}
if (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING ||
p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING)
{
/* race condition: discard the security request while master is encrypting the link */
*p_sec_req_act = BTM_BLE_SEC_REQ_ACT_DISCARD;
}
else
{
req_sec_level = BTM_LE_SEC_UNAUTHENTICATE;
if ((auth_req == (BTM_LE_AUTH_REQ_BOND|BTM_LE_AUTH_REQ_MITM)) ||
(auth_req == (BTM_LE_AUTH_REQ_MITM)) )
{
req_sec_level = BTM_LE_SEC_AUTHENTICATED;
}
BTM_TRACE_DEBUG1 ("dev_rec sec_flags=0x%x", p_dev_rec->sec_flags);
/* currently encrpted */
if (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)
{
if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED)
cur_sec_level = BTM_LE_SEC_AUTHENTICATED;
else
cur_sec_level = BTM_LE_SEC_UNAUTHENTICATE;
}
else /* unencrypted link */
{
/* if bonded, get the key security level */
if (p_dev_rec->ble.key_type & BTM_LE_KEY_PENC)
cur_sec_level = p_dev_rec->ble.keys.sec_level;
else
cur_sec_level = BTM_LE_SEC_NONE;
}
if (cur_sec_level >= req_sec_level)
{
if (cur_sec_level == BTM_LE_SEC_NONE)
{
*p_sec_req_act = BTM_BLE_SEC_REQ_ACT_NONE;
}
else
{
/* To avoid re-encryption on an encrypted link for an equal condition encryption */
/* if link has been encrypted, do nothing, go straight to furhter action
if (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)
*p_sec_req_act = BTM_BLE_SEC_REQ_ACT_DISCARD;
else
*/
*p_sec_req_act = BTM_BLE_SEC_REQ_ACT_ENCRYPT;
}
}
else
{
*p_sec_req_act = BTM_BLE_SEC_REQ_ACT_PAIR; /* start the pariring process to upgrade the keys*/
}
}
BTM_TRACE_DEBUG3("cur_sec_level=%d req_sec_level=%d sec_req_act=%d",
cur_sec_level,
req_sec_level,
*p_sec_req_act);
}
/*******************************************************************************
**
** Function btm_ble_set_encryption
**
** Description This function is called to ensure that LE connection is
** encrypted. Should be called only on an open connection.
** Typically only needed for connections that first want to
** bring up unencrypted links, then later encrypt them.
**
** Returns void
** the local device ER is copied into er
**
*******************************************************************************/
tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, void *p_ref_data, UINT8 link_role)
{
tBTM_STATUS cmd = BTM_NO_RESOURCES;
tBTM_BLE_SEC_ACT sec_act = *(tBTM_BLE_SEC_ACT *)p_ref_data ;
tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bd_addr);
if (p_rec == NULL)
{
BTM_TRACE_WARNING1 ("btm_ble_set_encryption (NULL device record!! sec_act=0x%x", sec_act);
return(BTM_WRONG_MODE);
}
BTM_TRACE_DEBUG2 ("btm_ble_set_encryption sec_act=0x%x role_master=%d", sec_act, p_rec->role_master);
if (sec_act == BTM_BLE_SEC_ENCRYPT_MITM)
{
p_rec->security_required |= BTM_SEC_IN_MITM;
}
switch (sec_act)
{
case BTM_BLE_SEC_ENCRYPT:
if (link_role == BTM_ROLE_MASTER)
{
/* start link layer encryption using the security info stored */
if (btm_ble_start_encrypt(bd_addr, FALSE, NULL))
{
p_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;
cmd = BTM_CMD_STARTED;
}
break;
}
/* if salve role then fall through to call SMP_Pair below which will send a
sec_request to request the master to encrypt the link */
case BTM_BLE_SEC_ENCRYPT_NO_MITM:
case BTM_BLE_SEC_ENCRYPT_MITM:
if (SMP_Pair(bd_addr) == SMP_STARTED)
{
cmd = BTM_CMD_STARTED;
p_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING;
}
break;
default:
cmd = BTM_SUCCESS;
break;
}
return cmd;
}
/*******************************************************************************
**
** Function btm_ble_ltk_request
**
** Description This function is called when encryption request is received
** on a slave device.
**
**
** Returns void
**
*******************************************************************************/
void btm_ble_ltk_request(UINT16 handle, UINT8 rand[8], UINT16 ediv)
{
tBTM_CB *p_cb = &btm_cb;
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev_by_handle (handle);
BT_OCTET8 dummy_stk = {0};
BTM_TRACE_DEBUG0 ("btm_ble_ltk_request");
p_cb->ediv = ediv;
memcpy(p_cb->enc_rand, rand, BT_OCTET8_LEN);
if (!smp_proc_ltk_request(p_dev_rec->bd_addr))
btm_ble_ltk_request_reply(p_dev_rec->bd_addr, FALSE, dummy_stk);
}
/*******************************************************************************
**
** Function btm_ble_start_encrypt
**
** Description This function is called to start LE encryption.
**
**
** Returns void
**
*******************************************************************************/
BOOLEAN btm_ble_start_encrypt(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk)
{
tBTM_CB *p_cb = &btm_cb;
tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bda);
BT_OCTET8 dummy_rand = {0};
BTM_TRACE_DEBUG0 ("btm_ble_start_encrypt");
if (!p_rec ||
(p_rec && p_rec->sec_state == BTM_SEC_STATE_ENCRYPTING))
return FALSE;
if (p_rec->sec_state == BTM_SEC_STATE_IDLE)
p_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;
p_cb->enc_handle = p_rec->hci_handle;
if (use_stk)
{
if (!btsnd_hcic_ble_start_enc(p_rec->hci_handle, dummy_rand, 0, stk))
return FALSE;
}
else if (p_rec->ble.key_type & BTM_LE_KEY_PENC)
{
if (!btsnd_hcic_ble_start_enc(p_rec->hci_handle, p_rec->ble.keys.rand,
p_rec->ble.keys.ediv, p_rec->ble.keys.ltk))
return FALSE;
}
else
{
return FALSE;
}
return TRUE;
}
/*******************************************************************************
**
** Function btm_ble_link_encrypted
**
** Description This function is called when LE link encrption status is changed.
**
** Returns void
**
*******************************************************************************/
void btm_ble_link_encrypted(BD_ADDR bd_addr, UINT8 encr_enable)
{
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
BOOLEAN enc_cback;
if (!p_dev_rec)
{
BTM_TRACE_WARNING1 ("btm_ble_link_encrypted (No Device Found!) encr_enable=%d", encr_enable);
return;
}
BTM_TRACE_DEBUG1 ("btm_ble_link_encrypted encr_enable=%d", encr_enable);
enc_cback = (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING);
smp_link_encrypted(bd_addr, encr_enable);
BTM_TRACE_DEBUG1(" p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags);
if (encr_enable && p_dev_rec->enc_key_size == 0)
p_dev_rec->enc_key_size = p_dev_rec->ble.keys.key_size;
p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
if (p_dev_rec->p_callback && enc_cback)
{
if (encr_enable)
btm_sec_dev_rec_cback_event(p_dev_rec, BTM_SUCCESS);
else if (p_dev_rec->role_master)
btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING);
}
/* to notify GATT to send data if any request is pending */
gatt_notify_enc_cmpl(p_dev_rec->bd_addr);
}
/*******************************************************************************
** Function btm_enc_proc_ltk
** Description send LTK reply when it's ready.
*******************************************************************************/
static void btm_enc_proc_ltk(tSMP_ENC *p)
{
UINT8 i;
BTM_TRACE_DEBUG0 ("btm_enc_proc_ltk");
if (p && p->param_len == BT_OCTET16_LEN)
{
for (i = 0; i < (BT_OCTET16_LEN - btm_cb.key_size); i ++)
p->param_buf[BT_OCTET16_LEN - i - 1] = 0;
btsnd_hcic_ble_ltk_req_reply(btm_cb.enc_handle, p->param_buf);
}
}
/*******************************************************************************
** Function btm_enc_proc_slave_y
** Description calculate LTK when Y is ready
*******************************************************************************/
static void btm_enc_proc_slave_y(tSMP_ENC *p)
{
UINT16 div, y;
UINT8 *pp = p->param_buf;
tBTM_CB *p_cb = &btm_cb;
tSMP_ENC output;
tBTM_SEC_DEV_REC *p_dev_rec;
BTM_TRACE_DEBUG0 ("btm_enc_proc_slave_y");
if (p != NULL)
{
STREAM_TO_UINT16(y, pp);
div = p_cb->ediv ^ y;
p_dev_rec = btm_find_dev_by_handle (p_cb->enc_handle);
if ( p_dev_rec &&
p_dev_rec->ble.keys.div == div )
{
BTM_TRACE_DEBUG0 ("LTK request OK");
/* calculating LTK , LTK = E er(div) */
SMP_Encrypt(p_cb->devcb.er, BT_OCTET16_LEN, (UINT8 *)&div, 2, &output);
btm_enc_proc_ltk(&output);
}
else
{
BTM_TRACE_DEBUG0 ("LTK request failed - send negative reply");
btsnd_hcic_ble_ltk_req_neg_reply(p_cb->enc_handle);
if (p_dev_rec)
btm_ble_link_encrypted(p_dev_rec->bd_addr, 0);
}
}
}
/*******************************************************************************
**
** Function btm_ble_ltk_request_reply
**
** Description This function is called to send a LTK request reply on a slave
** device.
**
** Returns void
**
*******************************************************************************/
void btm_ble_ltk_request_reply(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk)
{
tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bda);
tBTM_CB *p_cb = &btm_cb;
tSMP_ENC output;
if (p_rec == NULL)
{
BTM_TRACE_ERROR0("btm_ble_ltk_request_reply received for unknown device");
return;
}
BTM_TRACE_DEBUG0 ("btm_ble_ltk_request_reply");
p_cb->enc_handle = p_rec->hci_handle;
p_cb->key_size = p_rec->ble.keys.key_size;
BTM_TRACE_ERROR1("key size = %d", p_rec->ble.keys.key_size);
if (use_stk)
{
btsnd_hcic_ble_ltk_req_reply(btm_cb.enc_handle, stk);
}
else /* calculate LTK using peer device */
{
/* generate Y= Encrypt(DHK, Rand) received from encrypt request */
SMP_Encrypt(p_cb->devcb.id_keys.dhk, BT_OCTET16_LEN, p_cb->enc_rand,
BT_OCTET8_LEN, &output);
btm_enc_proc_slave_y(&output);
}
}
/*******************************************************************************
**
** Function btm_ble_io_capabilities_req
**
** Description This function is called to handle SMP get IO capability request.
**
** Returns void
**
*******************************************************************************/
UINT8 btm_ble_io_capabilities_req(tBTM_SEC_DEV_REC *p_dev_rec, tBTM_LE_IO_REQ *p_data)
{
UINT8 callback_rc = BTM_SUCCESS;
BTM_TRACE_DEBUG0 ("btm_ble_io_capabilities_req");
if (btm_cb.api.p_le_callback)
{
/* the callback function implementation may change the IO capability... */
callback_rc = (*btm_cb.api.p_le_callback) (BTM_LE_IO_REQ_EVT, p_dev_rec->bd_addr, (tBTM_LE_EVT_DATA *)p_data);
}
#if BTM_OOB_INCLUDED == TRUE
if ((callback_rc == BTM_SUCCESS) || (BTM_OOB_UNKNOWN != p_data->oob_data))
#else
if (callback_rc == BTM_SUCCESS)
#endif
{
p_data->auth_req &= BTM_LE_AUTH_REQ_MASK;
BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 1: p_dev_rec->security_required = %d auth_req:%d",
p_dev_rec->security_required, p_data->auth_req);
BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 2: i_keys=0x%x r_keys=0x%x (bit 0-LTK 1-IRK 2-CSRK)",
p_data->init_keys,
p_data->resp_keys);
/* if authentication requires MITM protection, put on the mask */
if (p_dev_rec->security_required & BTM_SEC_IN_MITM)
p_data->auth_req |= BTM_LE_AUTH_REQ_MITM;
if (!(p_data->auth_req & SMP_AUTH_BOND))
{
BTM_TRACE_DEBUG0("Non bonding: No keys should be exchanged");
p_data->init_keys = 0;
p_data->resp_keys = 0;
}
BTM_TRACE_DEBUG1 ("btm_ble_io_capabilities_req 3: auth_req:%d", p_data->auth_req);
BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 4: i_keys=0x%x r_keys=0x%x",
p_data->init_keys,
p_data->resp_keys);
BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 5: p_data->io_cap = %d auth_req:%d",
p_data->io_cap, p_data->auth_req);
/* remove MITM protection requirement if IO cap does not allow it */
if ((p_data->io_cap == BTM_IO_CAP_NONE) && p_data->oob_data == SMP_OOB_NONE)
p_data->auth_req &= ~BTM_LE_AUTH_REQ_MITM;
BTM_TRACE_DEBUG3 ("btm_ble_io_capabilities_req 6: IO_CAP:%d oob_data:%d auth_req:%d",
p_data->io_cap, p_data->oob_data, p_data->auth_req);
}
return callback_rc;
}
/*******************************************************************************
**
** Function btm_ble_connected
**
** Description This function is when a LE connection to the peer device is
** establsihed
**
** Returns void
**
*******************************************************************************/
void btm_ble_connected (UINT8 *bda, UINT16 handle, UINT8 enc_mode, UINT8 role,
tBLE_ADDR_TYPE addr_type, BOOLEAN addr_matched)
{
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bda);
tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
BTM_TRACE_EVENT0 ("btm_ble_connected");
/* Commenting out trace due to obf/compilation problems.
*/
#if (BT_USE_TRACES == TRUE)
if (p_dev_rec)
{
BTM_TRACE_EVENT4 ("Security Manager: btm_sec_connected : handle:%d enc_mode:%d bda:%x RName:%s",
handle, enc_mode,
(bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5],
p_dev_rec->sec_bd_name);
BTM_TRACE_DEBUG1 ("btm_ble_connected sec_flags=0x%x",p_dev_rec->sec_flags);
}
else
{
BTM_TRACE_EVENT3 ("Security Manager: btm_sec_connected: handle:%d enc_mode:%d bda:%x ",
handle, enc_mode,
(bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5]);
}
#endif
if (!p_dev_rec)
{
/* There is no device record for new connection. Allocate one */
p_dev_rec = btm_sec_alloc_dev (bda);
}
else /* Update the timestamp for this device */
{
p_dev_rec->timestamp = btm_cb.dev_rec_count++;
}
/* update device information */
p_dev_rec->device_type |= BT_DEVICE_TYPE_BLE;
p_dev_rec->hci_handle = handle;
p_dev_rec->ble.ble_addr_type = addr_type;
if (role == HCI_ROLE_MASTER)
p_dev_rec->role_master = TRUE;
if (role == HCI_ROLE_SLAVE)
p_cb->inq_var.adv_mode = BTM_BLE_ADV_DISABLE;
p_cb->inq_var.directed_conn = FALSE;
return;
}
/*****************************************************************************
** Function btm_ble_conn_complete
**
** Description LE connection complete.
**
******************************************************************************/
void btm_ble_conn_complete(UINT8 *p, UINT16 evt_len)
{
UINT8 role, status, bda_type;
UINT16 handle;
BD_ADDR bda;
UINT16 conn_interval, conn_latency, conn_timeout;
BOOLEAN match = FALSE;
STREAM_TO_UINT8 (status, p);
STREAM_TO_UINT16 (handle, p);
STREAM_TO_UINT8 (role, p);
STREAM_TO_UINT8 (bda_type, p);
STREAM_TO_BDADDR (bda, p);
if (status == 0)
{
STREAM_TO_UINT16 (conn_interval, p);
STREAM_TO_UINT16 (conn_latency, p);
STREAM_TO_UINT16 (conn_timeout, p);
handle = HCID_GET_HANDLE (handle);
btm_ble_connected(bda, handle, HCI_ENCRYPT_MODE_DISABLED, role, bda_type, match);
l2cble_conn_comp (handle, role, bda, bda_type, conn_interval,
conn_latency, conn_timeout);
}
else
{
role = HCI_ROLE_UNKNOWN;
if (status == HCI_ERR_DIRECTED_ADVERTISING_TIMEOUT)
btm_ble_dir_adv_tout();
}
btm_ble_update_mode_operation(role, bda, TRUE);
}
/*****************************************************************************
** Function btm_proc_smp_cback
**
** Description This function is the SMP callback handler.
**
******************************************************************************/
UINT8 btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data)
{
tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
UINT8 res = 0;
BTM_TRACE_DEBUG1 ("btm_proc_smp_cback event = %d", event);
if (p_dev_rec != NULL)
{
switch (event)
{
case SMP_IO_CAP_REQ_EVT:
btm_ble_io_capabilities_req(p_dev_rec, (tBTM_LE_IO_REQ *)&p_data->io_req);
break;
case SMP_PASSKEY_REQ_EVT:
case SMP_PASSKEY_NOTIF_EVT:
case SMP_OOB_REQ_EVT:
p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
case SMP_SEC_REQUEST_EVT:
case SMP_COMPLT_EVT:
if (btm_cb.api.p_le_callback)
{
/* the callback function implementation may change the IO capability... */
BTM_TRACE_DEBUG1 ("btm_cb.api.p_le_callback=0x%x", btm_cb.api.p_le_callback );
(*btm_cb.api.p_le_callback) (event, bd_addr, (tBTM_LE_EVT_DATA *)p_data);
}
if (event == SMP_COMPLT_EVT)
{
BTM_TRACE_DEBUG2 ("evt=SMP_COMPLT_EVT before update sec_level=0x%x sec_flags=0x%x", p_data->cmplt.sec_level , p_dev_rec->sec_flags );
res = (p_data->cmplt.reason == SMP_SUCCESS) ? BTM_SUCCESS : BTM_ERR_PROCESSING;
BTM_TRACE_DEBUG3 ("after update result=%d sec_level=0x%x sec_flags=0x%x",
res, p_data->cmplt.sec_level , p_dev_rec->sec_flags );
btm_sec_dev_rec_cback_event(p_dev_rec, res);
if (p_data->cmplt.is_pair_cancel && btm_cb.api.p_bond_cancel_cmpl_callback )
{
BTM_TRACE_DEBUG0 ("Pairing Cancel completed");
(*btm_cb.api.p_bond_cancel_cmpl_callback)(BTM_SUCCESS);
}
#if BTM_BLE_CONFORMANCE_TESTING == TRUE
if (res != BTM_SUCCESS)
{
if (!btm_cb.devcb.no_disc_if_pair_fail)
{
BTM_TRACE_DEBUG0 ("Pairing failed - Remove ACL");
btm_remove_acl(bd_addr);
}
else
{
BTM_TRACE_DEBUG0 ("Pairing failed - Not Removing ACL");
p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
}
}
#else
if (res != BTM_SUCCESS)
btm_remove_acl(bd_addr);
#endif
BTM_TRACE_DEBUG3 ("btm_cb pairing_state=%x pairing_flags=%x pin_code_len=%x",
btm_cb.pairing_state,
btm_cb.pairing_flags,
btm_cb.pin_code_len );
BTM_TRACE_DEBUG6 ("btm_cb.pairing_bda %02x:%02x:%02x:%02x:%02x:%02x",
btm_cb.pairing_bda[0], btm_cb.pairing_bda[1], btm_cb.pairing_bda[2],
btm_cb.pairing_bda[3], btm_cb.pairing_bda[4], btm_cb.pairing_bda[5]);
memset (btm_cb.pairing_bda, 0xff, BD_ADDR_LEN);
btm_cb.pairing_flags = 0;
}
break;
default:
BTM_TRACE_DEBUG1 ("unknown event = %d", event);
break;
}
}
else
{
BTM_TRACE_ERROR0("btm_proc_smp_cback received for unknown device");
}
return 0;
}
#endif /* SMP_INCLUDED */
#endif /* BLE_INCLUDED */
/*******************************************************************************
**
** Function BTM_BleDataSignature
**
** Description This function is called to sign the data using AES128 CMAC
** algorith.
**
** Parameter bd_addr: target device the data to be signed for.
** p_text: singing data
** len: length of the data to be signed.
** signature: output parameter where data signature is going to
** be stored.
**
** Returns TRUE if signing sucessul, otherwise FALSE.
**
*******************************************************************************/
BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len,
BLE_SIGNATURE signature)
{
BOOLEAN ret = FALSE;
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bd_addr);
UINT8 *p_buf, *pp;
BT_OCTET16 er;
UINT16 div;
UINT8 temp[4]; /* for (r || DIV) r=1*/
UINT16 r=1;
UINT8 *p=temp, *p_mac = (UINT8 *)signature;
tSMP_ENC output;
BT_OCTET16 local_csrk;
BTM_TRACE_DEBUG0 ("BTM_BleDataSignature");
if (p_rec == NULL)
{
BTM_TRACE_ERROR0("data signing can not be done from unknow device");
}
else
{
if ((p_buf = (UINT8 *)GKI_getbuf((UINT16)(len + 4))) != NULL)
{
BTM_TRACE_DEBUG0("Start to generate Local CSRK");
/* prepare plain text */
if (p_text)
{
memcpy(p_buf, p_text, len);
pp = (p_buf + len);
}
#if BTM_BLE_CONFORMANCE_TESTING == TRUE
if ( btm_cb.devcb.enable_test_local_sign_cntr)
{
BTM_TRACE_DEBUG1 ("Use Test local counter value from script counter_val=%d", btm_cb.devcb.test_local_sign_cntr);
UINT32_TO_STREAM(pp, btm_cb.devcb.test_local_sign_cntr);
}
else
{
UINT32_TO_STREAM(pp, p_rec->ble.keys.local_counter);
}
#else
UINT32_TO_STREAM(pp, p_rec->ble.keys.local_counter);
#endif
/* compute local csrk */
if (btm_get_local_div(bd_addr, &div))
{
BTM_TRACE_DEBUG1 ("compute_csrk div=%x", div);
BTM_GetDeviceEncRoot(er);
/* CSRK = d1(ER, DIV, 1) */
UINT16_TO_STREAM(p, div);
UINT16_TO_STREAM(p, r);
if (!SMP_Encrypt(er, BT_OCTET16_LEN, temp, 4, &output))
{
BTM_TRACE_ERROR0("Local CSRK generation failed ");
}
else
{
BTM_TRACE_DEBUG0("local CSRK generation success");
memcpy((void *)local_csrk, output.param_buf, BT_OCTET16_LEN);
#if BTM_BLE_CONFORMANCE_TESTING == TRUE
if (btm_cb.devcb.enable_test_local_sign_cntr)
{
UINT32_TO_STREAM(p_mac, btm_cb.devcb.test_local_sign_cntr);
}
else
{
UINT32_TO_STREAM(p_mac, p_rec->ble.keys.local_counter);
}
#else
UINT32_TO_STREAM(p_mac, p_rec->ble.keys.local_counter);
#endif
if ((ret = AES_CMAC(local_csrk, p_buf, (UINT16)(len + 4), BTM_CMAC_TLEN_SIZE, p_mac)) == TRUE)
{
btm_ble_increment_sign_ctr(bd_addr, TRUE);
#if BTM_BLE_CONFORMANCE_TESTING == TRUE
if ( btm_cb.devcb.enable_test_mac_val)
{
BTM_TRACE_DEBUG0 ("Use MAC value from script");
memcpy(p_mac, btm_cb.devcb.test_mac, BTM_CMAC_TLEN_SIZE);
}
#endif
}
BTM_TRACE_DEBUG1("BTM_BleDataSignature p_mac = %d", p_mac);
BTM_TRACE_DEBUG4("p_mac[0] = 0x%02x p_mac[1] = 0x%02x p_mac[2] = 0x%02x p_mac[3] = 0x%02x",
*p_mac, *(p_mac + 1), *(p_mac + 2), *(p_mac + 3));
BTM_TRACE_DEBUG4("p_mac[4] = 0x%02x p_mac[5] = 0x%02x p_mac[6] = 0x%02x p_mac[7] = 0x%02x",
*(p_mac + 4), *(p_mac + 5), *(p_mac + 6), *(p_mac + 7));
GKI_freebuf(p_buf);
}
}
}
}
#endif /* BLE_INCLUDED */
return ret;
}
/*******************************************************************************
**
** Function BTM_BleVerifySignature
**
** Description This function is called to verify the data signature
**
** Parameter bd_addr: target device the data to be signed for.
** p_orig: original data before signature.
** len: length of the signing data
** counter: counter used when doing data signing
** p_comp: signature to be compared against.
** Returns TRUE if signature verified correctly; otherwise FALSE.
**
*******************************************************************************/
BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig, UINT16 len, UINT32 counter,
UINT8 *p_comp)
{
BOOLEAN verified = FALSE;
#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
tBTM_SEC_DEV_REC *p_rec = btm_find_dev (bd_addr);
UINT8 p_mac[BTM_CMAC_TLEN_SIZE];
if (p_rec == NULL || (p_rec && !(p_rec->ble.key_type & BTM_LE_KEY_PCSRK)))
{
BTM_TRACE_ERROR0("can not verify signature for unknown device");
}
else if (counter < p_rec->ble.keys.counter)
{
BTM_TRACE_ERROR0("signature received with out dated sign counter");
}
else if (p_orig == NULL)
{
BTM_TRACE_ERROR0("No signature to verify");
}
else
{
BTM_TRACE_DEBUG2 ("BTM_BleVerifySignature rcv_cnt=%d >= expected_cnt=%d", counter, p_rec->ble.keys.counter);
if (AES_CMAC(p_rec->ble.keys.csrk, p_orig, len, BTM_CMAC_TLEN_SIZE, p_mac))
{
if (memcmp(p_mac, p_comp, BTM_CMAC_TLEN_SIZE) == 0)
{
btm_ble_increment_sign_ctr(bd_addr, FALSE);
verified = TRUE;
}
}
}
#endif /* BLE_INCLUDED */
return verified;
}
#if BLE_INCLUDED == TRUE
/*******************************************************************************
** Utility functions for LE device IR/ER generation
*******************************************************************************/
/*******************************************************************************
**
** Function btm_notify_new_key
**
** Description This function is to notify application new keys have been
** generated.
**
** Returns void
**
*******************************************************************************/
static void btm_notify_new_key(UINT8 key_type)
{
tBTM_BLE_LOCAL_KEYS *p_locak_keys = NULL;
BTM_TRACE_DEBUG1 ("btm_notify_new_key key_type=%d", key_type);
if (btm_cb.api.p_le_key_callback)
{
switch (key_type)
{
case BTM_BLE_KEY_TYPE_ID:
BTM_TRACE_DEBUG0 ("BTM_BLE_KEY_TYPE_ID");
p_locak_keys = (tBTM_BLE_LOCAL_KEYS *)&btm_cb.devcb.id_keys;
break;
case BTM_BLE_KEY_TYPE_ER:
BTM_TRACE_DEBUG0 ("BTM_BLE_KEY_TYPE_ER");
p_locak_keys = (tBTM_BLE_LOCAL_KEYS *)&btm_cb.devcb.er;
break;
default:
BTM_TRACE_ERROR1("unknown key type: %d", key_type);
break;
}
if (p_locak_keys != NULL)
(*btm_cb.api.p_le_key_callback) (key_type, p_locak_keys);
}
}
/*******************************************************************************
**
** Function btm_ble_process_er2
**
** Description This function is called when ER is generated, store it in
** local control block.
**
** Returns void
**
*******************************************************************************/
static void btm_ble_process_er2(tBTM_RAND_ENC *p)
{
BTM_TRACE_DEBUG0 ("btm_ble_process_er2");
if (p &&p->opcode == HCI_BLE_RAND)
{
memcpy(&btm_cb.devcb.er[8], p->param_buf, BT_OCTET8_LEN);
btm_notify_new_key(BTM_BLE_KEY_TYPE_ER);
}
else
{
BTM_TRACE_ERROR0("Generating ER2 exception.");
memset(&btm_cb.devcb.er, 0, sizeof(BT_OCTET16));
}
}
/*******************************************************************************
**
** Function btm_ble_process_er
**
** Description This function is called when ER is generated, store it in
** local control block.
**
** Returns void
**
*******************************************************************************/
static void btm_ble_process_er(tBTM_RAND_ENC *p)
{
BTM_TRACE_DEBUG0 ("btm_ble_process_er");
if (p &&p->opcode == HCI_BLE_RAND)
{
memcpy(&btm_cb.devcb.er[0], p->param_buf, BT_OCTET8_LEN);
if (!btsnd_hcic_ble_rand((void *)btm_ble_process_er2))
{
memset(&btm_cb.devcb.er, 0, sizeof(BT_OCTET16));
BTM_TRACE_ERROR0("Generating ER2 failed.");
}
}
else
{
BTM_TRACE_ERROR0("Generating ER1 exception.");
}
}
/*******************************************************************************
**
** Function btm_ble_process_irk
**
** Description This function is called when IRK is generated, store it in
** local control block.
**
** Returns void
**
*******************************************************************************/
static void btm_ble_process_irk(tSMP_ENC *p)
{
BTM_TRACE_DEBUG0 ("btm_ble_process_irk");
if (p &&p->opcode == HCI_BLE_ENCRYPT)
{
memcpy(btm_cb.devcb.id_keys.irk, p->param_buf, BT_OCTET16_LEN);
btm_notify_new_key(BTM_BLE_KEY_TYPE_ID);
}
else
{
BTM_TRACE_ERROR0("Generating IRK exception.");
}
/* proceed generate ER */
if (!btsnd_hcic_ble_rand((void *)btm_ble_process_er))
{
BTM_TRACE_ERROR0("Generating ER failed.");
}
}
/*******************************************************************************
**
** Function btm_ble_process_dhk
**
** Description This function is called when DHK is calculated, store it in
** local control block, and proceed to generate ER, a 128-bits
** random number.
**
** Returns void
**
*******************************************************************************/
static void btm_ble_process_dhk(tSMP_ENC *p)
{
#if SMP_INCLUDED == TRUE
UINT8 btm_ble_irk_pt = 0x01;
tSMP_ENC output;
BTM_TRACE_DEBUG0 ("btm_ble_process_dhk");
if (p && p->opcode == HCI_BLE_ENCRYPT)
{
memcpy(btm_cb.devcb.id_keys.dhk, p->param_buf, BT_OCTET16_LEN);
BTM_TRACE_DEBUG0("BLE DHK generated.");
/* IRK = D1(IR, 1) */
if (!SMP_Encrypt(btm_cb.devcb.id_keys.ir, BT_OCTET16_LEN, &btm_ble_irk_pt,
1, &output))
{
/* reset all identity root related key */
memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
}
else
{
btm_ble_process_irk(&output);
}
}
else
{
/* reset all identity root related key */
memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
}
#endif
}
/*******************************************************************************
**
** Function btm_ble_process_ir2
**
** Description This function is called when IR is generated, proceed to calculate
** DHK = Eir({0x03, 0, 0 ...})
**
**
** Returns void
**
*******************************************************************************/
static void btm_ble_process_ir2(tBTM_RAND_ENC *p)
{
#if SMP_INCLUDED == TRUE
UINT8 btm_ble_dhk_pt = 0x03;
tSMP_ENC output;
BTM_TRACE_DEBUG0 ("btm_ble_process_ir2");
if (p && p->opcode == HCI_BLE_RAND)
{
/* remembering in control block */
memcpy(&btm_cb.devcb.id_keys.ir[8], p->param_buf, BT_OCTET8_LEN);
/* generate DHK= Eir({0x03, 0x00, 0x00 ...}) */
SMP_Encrypt(btm_cb.devcb.id_keys.ir, BT_OCTET16_LEN, &btm_ble_dhk_pt,
1, &output);
btm_ble_process_dhk(&output);
BTM_TRACE_DEBUG0("BLE IR generated.");
}
else
{
memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
}
#endif
}
/*******************************************************************************
**
** Function btm_ble_process_ir
**
** Description This function is called when IR is generated, proceed to calculate
** DHK = Eir({0x02, 0, 0 ...})
**
**
** Returns void
**
*******************************************************************************/
static void btm_ble_process_ir(tBTM_RAND_ENC *p)
{
BTM_TRACE_DEBUG0 ("btm_ble_process_ir");
if (p && p->opcode == HCI_BLE_RAND)
{
/* remembering in control block */
memcpy(btm_cb.devcb.id_keys.ir, p->param_buf, BT_OCTET8_LEN);
if (!btsnd_hcic_ble_rand((void *)btm_ble_process_ir2))
{
BTM_TRACE_ERROR0("Generating IR2 failed.");
memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
}
}
}
/*******************************************************************************
**
** Function btm_ble_reset_id
**
** Description This function is called to reset LE device identity.
**
** Returns void
**
*******************************************************************************/
void btm_ble_reset_id( void )
{
BTM_TRACE_DEBUG0 ("btm_ble_reset_id");
/* regenrate Identity Root*/
if (!btsnd_hcic_ble_rand((void *)btm_ble_process_ir))
{
BTM_TRACE_DEBUG0("Generating IR failed.");
}
}
#if BTM_BLE_CONFORMANCE_TESTING == TRUE
/*******************************************************************************
**
** Function btm_ble_set_no_disc_if_pair_fail
**
** Description This function indicates that whether no disconnect of the ACL
** should be used if pairing failed
**
** Returns void
**
*******************************************************************************/
void btm_ble_set_no_disc_if_pair_fail(BOOLEAN disable_disc )
{
BTM_TRACE_DEBUG1 ("btm_ble_set_disc_enable_if_pair_fail disable_disc=%d", disable_disc);
btm_cb.devcb.no_disc_if_pair_fail = disable_disc;
}
/*******************************************************************************
**
** Function btm_ble_set_test_mac_value
**
** Description This function set test MAC value
**
** Returns void
**
*******************************************************************************/
void btm_ble_set_test_mac_value(BOOLEAN enable, UINT8 *p_test_mac_val )
{
BTM_TRACE_DEBUG1 ("btm_ble_set_test_mac_value enable=%d", enable);
btm_cb.devcb.enable_test_mac_val = enable;
memcpy(btm_cb.devcb.test_mac, p_test_mac_val, BT_OCTET8_LEN);
}
/*******************************************************************************
**
** Function btm_ble_set_test_local_sign_cntr_value
**
** Description This function set test local sign counter value
**
** Returns void
**
*******************************************************************************/
void btm_ble_set_test_local_sign_cntr_value(BOOLEAN enable, UINT32 test_local_sign_cntr )
{
BTM_TRACE_DEBUG2 ("btm_ble_set_test_local_sign_cntr_value enable=%d local_sign_cntr=%d",
enable, test_local_sign_cntr);
btm_cb.devcb.enable_test_local_sign_cntr = enable;
btm_cb.devcb.test_local_sign_cntr = test_local_sign_cntr;
}
/*******************************************************************************
**
** Function btm_set_random_address
**
** Description This function set a random address to local controller.
**
** Returns void
**
*******************************************************************************/
void btm_set_random_address(BD_ADDR random_bda)
{
tBTM_LE_RANDOM_CB *p_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
BOOLEAN adv_mode = btm_cb.ble_ctr_cb.inq_var.adv_mode ;
BTM_TRACE_DEBUG0 ("btm_set_random_address");
if (adv_mode == BTM_BLE_ADV_ENABLE)
btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE);
memcpy(p_cb->private_addr, random_bda, BD_ADDR_LEN);
btsnd_hcic_ble_set_random_addr(p_cb->private_addr);
if (adv_mode == BTM_BLE_ADV_ENABLE)
btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_ENABLE);
}
#endif /* BTM_BLE_CONFORMANCE_TESTING */
#endif /* BLE_INCLUDED */